Merge branch 'for-rmk' of git://git.marvell.com/orion into devel
diff --git a/MAINTAINERS b/MAINTAINERS
index cf4abdd..581fedc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4136,6 +4136,69 @@
F: drivers/video/riva/
F: drivers/video/nvidia/
+OMAP SUPPORT
+P: Tony Lindgren <tony@atomide.com>
+M: tony@atomide.com
+L: linux-omap@vger.kernel.org
+W: http://www.muru.com/linux/omap/
+W: http://linux.omap.com/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+S: Maintained
+F: arch/arm/*omap*
+
+OMAP CLOCK FRAMEWORK SUPPORT
+P: Paul Walmsley
+M: paul@pwsan.com
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/*omap*/*clock*
+
+OMAP POWER MANAGEMENT SUPPORT
+P: Kevin Hilman
+M: khilman@deeprootsystems.com
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/*omap*/*pm*
+
+OMAP AUDIO SUPPORT
+P: Jarkko Nikula
+M: jhnikula@gmail.com
+L: alsa-devel@alsa-project.org (subscribers-only)
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: sound/soc/omap/
+
+OMAP FRAMEBUFFER SUPPORT
+P: Imre Deak
+M: imre.deak@nokia.com
+L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/video/omap/
+
+OMAP MMC SUPPORT
+P: Jarkko Lavinen
+M: jarkko.lavinen@nokia.com
+L: linux-kernel@vger.kernel.org
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/mmc/host/*omap*
+
+OMAP RANDOM NUMBER GENERATOR SUPPORT
+P: Deepak Saxena
+M: dsaxena@plexity.net
+S: Maintained
+F: drivers/char/hw_random/omap-rng.c
+
+OMAP USB SUPPORT
+P: Felipe Balbi
+M: felipe.balbi@nokia.com
+P: David Brownell
+M: dbrownell@users.sourceforge.net
+L: linux-usb@vger.kernel.org
+L: linux-omap@vger.kernel.org
+S: Maintained
+
OMFS FILESYSTEM
P: Bob Copeland
M: me@bobcopeland.com
@@ -5524,20 +5587,6 @@
F: drivers/mmc/host/tifm_sd.c
F: include/linux/tifm.h
-TI OMAP MMC INTERFACE DRIVER
-P: Carlos Aguiar, Anderson Briglia and Syed Khasim
-M: linux-omap@vger.kernel.org
-W: http://linux.omap.com
-W: http://www.muru.com/linux/omap/
-S: Maintained
-F: drivers/mmc/host/omap.c
-
-TI OMAP RANDOM NUMBER GENERATOR SUPPORT
-P: Deepak Saxena
-M: dsaxena@plexity.net
-S: Maintained
-F: drivers/char/hw_random/omap-rng.c
-
TIPC NETWORK LAYER
P: Per Liden
M: per.liden@ericsson.com
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c6225ea..646a5d5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -34,15 +34,12 @@
config GENERIC_GPIO
bool
- default n
config GENERIC_TIME
bool
- default n
config GENERIC_CLOCKEVENTS
bool
- default n
config GENERIC_CLOCKEVENTS_BROADCAST
bool
@@ -55,7 +52,6 @@
config NO_IOPORT
bool
- default n
config EISA
bool
@@ -126,11 +122,9 @@
config ARCH_HAS_ILOG2_U32
bool
- default n
config ARCH_HAS_ILOG2_U64
bool
- default n
config GENERIC_HWEIGHT
bool
@@ -253,6 +247,14 @@
help
Support for Cirrus Logic 711x/721x based boards.
+config ARCH_GEMINI
+ bool "Cortina Systems Gemini"
+ select CPU_FA526
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for the Cortina Systems Gemini family SoCs
+
config ARCH_EBSA110
bool "EBSA-110"
select CPU_SA110
@@ -277,14 +279,6 @@
help
This enables support for the Cirrus EP93xx series of CPUs.
-config ARCH_GEMINI
- bool "Cortina Systems Gemini"
- select CPU_FA526
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Support for the Cortina Systems Gemini family SoCs
-
config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
@@ -293,6 +287,17 @@
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
+config ARCH_MXC
+ bool "Freescale MXC/iMX-based"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select ARCH_MTD_XIP
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ help
+ Support for Freescale MXC/iMX-based family of processors
+
config ARCH_NETX
bool "Hilscher NetX based"
select CPU_ARM926T
@@ -309,15 +314,6 @@
help
This enables support for systems based on the Hynix HMS720x
-config ARCH_IMX
- bool "IMX"
- select CPU_ARM920T
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- help
- Support for Motorola's i.MX family of processors (MX1, MXL).
-
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
@@ -406,28 +402,6 @@
Support for the following Marvell Kirkwood series SoCs:
88F6180, 88F6192 and 88F6281.
-config ARCH_KS8695
- bool "Micrel/Kendin KS8695"
- select CPU_ARM922T
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
- System-on-Chip devices.
-
-config ARCH_NS9XXX
- bool "NetSilicon NS9xxx"
- select CPU_ARM926T
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- help
- Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
- System.
-
- <http://www.digi.com/products/microprocessors/index.jsp>
-
config ARCH_LOKI
bool "Marvell Loki (88RC8480)"
select CPU_FEROCEON
@@ -450,17 +424,6 @@
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
-config ARCH_MXC
- bool "Freescale MXC/iMX-based"
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- select ARCH_MTD_XIP
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- help
- Support for Freescale MXC/iMX-based family of processors
-
config ARCH_ORION5X
bool "Marvell Orion"
depends on MMU
@@ -476,6 +439,49 @@
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
Orion-2 (5281), Orion-1-90 (6183).
+config ARCH_MMP
+ bool "Marvell PXA168/910"
+ depends on MMU
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
+ select PLAT_PXA
+ help
+ Support for Marvell's PXA168/910 processor line.
+
+config ARCH_KS8695
+ bool "Micrel/Kendin KS8695"
+ select CPU_ARM922T
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+ System-on-Chip devices.
+
+config ARCH_NS9XXX
+ bool "NetSilicon NS9xxx"
+ select CPU_ARM926T
+ select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ help
+ Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+ System.
+
+ <http://www.digi.com/products/microprocessors/index.jsp>
+
+config ARCH_W90X900
+ bool "Nuvoton W90X900 CPU"
+ select CPU_ARM926T
+ help
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+ can login www.mcuos.com or www.nuvoton.com to know more.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
@@ -498,19 +504,16 @@
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MMP
- bool "Marvell PXA168/910"
- depends on MMU
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- select COMMON_CLKDEV
+config ARCH_MSM
+ bool "Qualcomm MSM"
+ select CPU_V6
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select TICK_ONESHOT
- select PLAT_PXA
help
- Support for Marvell's PXA168/910 processor line.
+ Support for Qualcomm MSM7K based systems. This runs on the ARM11
+ apps processor of the MSM7K and depends on a shared memory
+ interface to the ARM9 modem processor which runs the baseband stack
+ and controls some vital subsystems (clock and power control, etc).
config ARCH_RPC
bool "RiscPC"
@@ -590,6 +593,7 @@
select ZONE_DMA
select HAVE_IDE
select COMMON_CLKDEV
+ select GENERIC_ALLOCATOR
help
Support for TI's DaVinci platform.
@@ -603,24 +607,6 @@
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
-config ARCH_MSM
- bool "Qualcomm MSM"
- select CPU_V6
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm MSM7K based systems. This runs on the ARM11
- apps processor of the MSM7K and depends on a shared memory
- interface to the ARM9 modem processor which runs the baseband stack
- and controls some vital subsystems (clock and power control, etc).
-
-config ARCH_W90X900
- bool "Nuvoton W90X900 CPU"
- select CPU_ARM926T
- help
- Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
- can login www.mcuos.com or www.nuvoton.com to know more.
-
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -686,8 +672,6 @@
source "arch/arm/mach-lh7a40x/Kconfig"
-source "arch/arm/mach-imx/Kconfig"
-
source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
@@ -863,7 +847,9 @@
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+ depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
+ select HAVE_ARM_SCU if ARCH_REALVIEW
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -881,6 +867,18 @@
If you don't know what to do here, say N.
+config HAVE_ARM_SCU
+ bool
+ depends on SMP
+ help
+ This option enables support for the ARM system coherency unit
+
+config HAVE_ARM_TWD
+ bool
+ depends on SMP
+ help
+ This options enables support for the ARM timer and watchdog unit
+
choice
prompt "Memory split"
default VMSPLIT_3G
@@ -921,6 +919,7 @@
bool "Use local timer interrupts"
depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
default y
+ select HAVE_ARM_TWD if ARCH_REALVIEW
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
@@ -982,7 +981,6 @@
config ARCH_HAS_HOLES_MEMORYMODEL
bool
- default n
# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE
@@ -1025,7 +1023,7 @@
config LEDS
bool "Timer and CPU usage LEDs"
depends on ARCH_CDB89712 || ARCH_EBSA110 || \
- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+ ARCH_EBSA285 || ARCH_INTEGRATOR || \
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
@@ -1191,7 +1189,7 @@
menu "CPU Power Management"
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
source "drivers/cpufreq/Kconfig"
@@ -1216,14 +1214,11 @@
If in doubt, say Y.
-config CPU_FREQ_IMX
- tristate "CPUfreq driver for i.MX CPUs"
- depends on ARCH_IMX && CPU_FREQ
- default n
- help
- This enables the CPUfreq driver for i.MX CPUs.
-
- If in doubt, say N.
+config CPU_FREQ_PXA
+ bool
+ depends on CPU_FREQ && ARCH_PXA && PXA25x
+ default y
+ select CPU_FREQ_DEFAULT_GOV_USERSPACE
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e84729b..e8ab877 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -99,64 +99,69 @@
#Default value
head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
textofs-y := 0x00008000
-
- machine-$(CONFIG_ARCH_RPC) := rpc
- machine-$(CONFIG_ARCH_EBSA110) := ebsa110
- machine-$(CONFIG_FOOTBRIDGE) := footbridge
- machine-$(CONFIG_ARCH_SHARK) := shark
- machine-$(CONFIG_ARCH_SA1100) := sa1100
-ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
- textofs-$(CONFIG_SA1111) := 0x00208000
+ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_SA1111) := 0x00208000
endif
- machine-$(CONFIG_ARCH_PXA) := pxa
- machine-$(CONFIG_ARCH_MMP) := mmp
- plat-$(CONFIG_PLAT_PXA) := pxa
- machine-$(CONFIG_ARCH_L7200) := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
- machine-$(CONFIG_ARCH_GEMINI) := gemini
- textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X) := clps711x
- machine-$(CONFIG_ARCH_IOP32X) := iop32x
- machine-$(CONFIG_ARCH_IOP33X) := iop33x
- machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
- plat-$(CONFIG_PLAT_IOP) := iop
- machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
- machine-$(CONFIG_ARCH_IXP2000) := ixp2000
- machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
- machine-$(CONFIG_ARCH_OMAP1) := omap1
- machine-$(CONFIG_ARCH_OMAP2) := omap2
- machine-$(CONFIG_ARCH_OMAP3) := omap2
- plat-$(CONFIG_ARCH_OMAP) := omap
- machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
- plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
- machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
- plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
- machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
- machine-$(CONFIG_ARCH_VERSATILE) := versatile
- machine-$(CONFIG_ARCH_IMX) := imx
- machine-$(CONFIG_ARCH_H720X) := h720x
- machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
- machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91) := at91
- machine-$(CONFIG_ARCH_EP93XX) := ep93xx
- machine-$(CONFIG_ARCH_PNX4008) := pnx4008
- machine-$(CONFIG_ARCH_NETX) := netx
- machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
- machine-$(CONFIG_ARCH_DAVINCI) := davinci
- machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
- machine-$(CONFIG_ARCH_KS8695) := ks8695
- plat-$(CONFIG_ARCH_MXC) := mxc
- machine-$(CONFIG_ARCH_MX2) := mx2
- machine-$(CONFIG_ARCH_MX3) := mx3
- machine-$(CONFIG_ARCH_MX1) := mx1
- machine-$(CONFIG_ARCH_ORION5X) := orion5x
- plat-$(CONFIG_PLAT_ORION) := orion
- machine-$(CONFIG_ARCH_MSM) := msm
- machine-$(CONFIG_ARCH_LOKI) := loki
- machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
- machine-$(CONFIG_ARCH_W90X900) := w90x900
+
+# Machine directory name. This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
+machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_CLPS711X) := clps711x
+machine-$(CONFIG_ARCH_DAVINCI) := davinci
+machine-$(CONFIG_ARCH_EBSA110) := ebsa110
+machine-$(CONFIG_ARCH_EP93XX) := ep93xx
+machine-$(CONFIG_ARCH_GEMINI) := gemini
+machine-$(CONFIG_ARCH_H720X) := h720x
+machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
+machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
+machine-$(CONFIG_ARCH_IOP32X) := iop32x
+machine-$(CONFIG_ARCH_IOP33X) := iop33x
+machine-$(CONFIG_ARCH_IXP2000) := ixp2000
+machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
+machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
+machine-$(CONFIG_ARCH_KS8695) := ks8695
+machine-$(CONFIG_ARCH_L7200) := l7200
+machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
+machine-$(CONFIG_ARCH_LOKI) := loki
+machine-$(CONFIG_ARCH_MMP) := mmp
+machine-$(CONFIG_ARCH_MSM) := msm
+machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
+machine-$(CONFIG_ARCH_MX1) := mx1
+machine-$(CONFIG_ARCH_MX2) := mx2
+machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_NETX) := netx
+machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
+machine-$(CONFIG_ARCH_OMAP1) := omap1
+machine-$(CONFIG_ARCH_OMAP2) := omap2
+machine-$(CONFIG_ARCH_OMAP3) := omap2
+machine-$(CONFIG_ARCH_OMAP4) := omap2
+machine-$(CONFIG_ARCH_ORION5X) := orion5x
+machine-$(CONFIG_ARCH_PNX4008) := pnx4008
+machine-$(CONFIG_ARCH_PXA) := pxa
+machine-$(CONFIG_ARCH_REALVIEW) := realview
+machine-$(CONFIG_ARCH_RPC) := rpc
+machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
+machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_SA1100) := sa1100
+machine-$(CONFIG_ARCH_SHARK) := shark
+machine-$(CONFIG_ARCH_VERSATILE) := versatile
+machine-$(CONFIG_ARCH_W90X900) := w90x900
+machine-$(CONFIG_FOOTBRIDGE) := footbridge
+
+# Platform directory name. This list is sorted alphanumerically
+# by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC) := mxc
+plat-$(CONFIG_ARCH_OMAP) := omap
+plat-$(CONFIG_PLAT_IOP) := iop
+plat-$(CONFIG_PLAT_ORION) := orion
+plat-$(CONFIG_PLAT_PXA) := pxa
+plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 5589444..f37afd9 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -135,6 +135,24 @@
}
EXPORT_SYMBOL(clkdev_alloc);
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+ struct device *dev)
+{
+ struct clk *r = clk_get(dev, id);
+ struct clk_lookup *l;
+
+ if (IS_ERR(r))
+ return PTR_ERR(r);
+
+ l = clkdev_alloc(r, alias, alias_dev_name);
+ clk_put(r);
+ if (!l)
+ return -ENODEV;
+ clkdev_add(l);
+ return 0;
+}
+EXPORT_SYMBOL(clk_add_alias);
+
/*
* clkdev_drop - remove a clock dynamically allocated
*/
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index eb2738b..ac18662 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 15 08:16:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Tue May 26 07:24:28 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -179,6 +179,7 @@
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
+CONFIG_AINTC=y
#
# TI DaVinci Implementations
@@ -188,11 +189,17 @@
# DaVinci Core Type
#
CONFIG_ARCH_DAVINCI_DM644x=y
+CONFIG_ARCH_DAVINCI_DM355=y
+CONFIG_ARCH_DAVINCI_DM646x=y
#
# DaVinci Board Type
#
CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_DAVINCI_DM355_EVM=y
+CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_DAVINCI_DM6467_EVM=y
CONFIG_DAVINCI_MUX=y
CONFIG_DAVINCI_MUX_DEBUG=y
CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -245,7 +252,7 @@
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -661,7 +668,10 @@
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
@@ -963,6 +973,7 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_DM355EVM_MSP is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
@@ -1317,6 +1328,7 @@
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_DAVINCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
@@ -1778,6 +1790,7 @@
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
new file mode 100644
index 0000000..4b04290
--- /dev/null
+++ b/arch/arm/configs/mx21_defconfig
@@ -0,0 +1,1170 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Tue Apr 14 16:58:09 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+CONFIG_MACH_MX21=y
+# CONFIG_MACH_MX27 is not set
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_MX21ADS=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
new file mode 100644
index 0000000..28be17f
--- /dev/null
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -0,0 +1,1528 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Mon May 18 14:01:52 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
new file mode 100644
index 0000000..67a3a77
--- /dev/null
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -0,0 +1,806 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29
+# Fri April 19 19:58:24 20089
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+CONFIG_ARCH_OMAP4=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_4430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
new file mode 100644
index 0000000..213fe9c
--- /dev/null
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -0,0 +1,1211 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 10 11:49:41 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OVERO is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 593102da..eb2cb31 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h
deleted file mode 100644
index e521b70..0000000
--- a/arch/arm/include/asm/hardware/arm_twd.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_HARDWARE_TWD_H
-#define __ASM_HARDWARE_TWD_H
-
-#define TWD_TIMER_LOAD 0x00
-#define TWD_TIMER_COUNTER 0x04
-#define TWD_TIMER_CONTROL 0x08
-#define TWD_TIMER_INTSTAT 0x0C
-
-#define TWD_WDOG_LOAD 0x20
-#define TWD_WDOG_COUNTER 0x24
-#define TWD_WDOG_CONTROL 0x28
-#define TWD_WDOG_INTSTAT 0x2C
-#define TWD_WDOG_RESETSTAT 0x30
-#define TWD_WDOG_DISABLE 0x34
-
-#define TWD_TIMER_CONTROL_ENABLE (1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT (0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
-
-#endif
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
new file mode 100644
index 0000000..50c7e7c
--- /dev/null
+++ b/arch/arm/include/asm/localtimer.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/include/asm/localtimer.h
+ *
+ * Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_LOCALTIMER_H
+#define __ASM_ARM_LOCALTIMER_H
+
+struct clock_event_device;
+
+/*
+ * Setup a per-cpu timer, whether it be a local timer or dummy broadcast
+ */
+void percpu_timer_setup(void);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+#ifdef CONFIG_HAVE_ARM_TWD
+
+#include "smp_twd.h"
+
+#define local_timer_ack() twd_timer_ack()
+#define local_timer_stop() twd_timer_stop()
+
+#else
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ.
+ * Returns true if the local timer IRQ is to be processed.
+ */
+int local_timer_ack(void);
+
+/*
+ * Stop a local timer interrupt.
+ */
+void local_timer_stop(void);
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+void local_timer_setup(struct clock_event_device *);
+
+#else
+
+static inline void local_timer_stop(void)
+{
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 58cf91f..742c2aaeb 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -30,6 +30,14 @@
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
+
+struct mem_type;
+extern const struct mem_type *get_mem_type(unsigned int type);
+/*
+ * external interface to remap single page with appropriate type
+ */
+extern int ioremap_page(unsigned long virt, unsigned long phys,
+ const struct mem_type *mtype);
#else
#define iotable_init(map,num) do { } while (0)
#endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 110295c..1cd2d64 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -342,7 +342,7 @@
return __va(ptr);
}
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
/*
* Conversion functions: convert a page and protection to a page entry,
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 5995935..a06e735 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -41,7 +41,7 @@
asmlinkage void do_IPI(struct pt_regs *regs);
/*
- * Setup the SMP cpu_possible_map
+ * Setup the set of possible CPUs (via set_cpu_possible)
*/
extern void smp_init_cpus(void);
@@ -56,11 +56,6 @@
extern void smp_cross_call(const struct cpumask *mask);
/*
- * Broadcast a clock event to other CPUs.
- */
-extern void smp_timer_broadcast(const struct cpumask *mask);
-
-/*
* Boot a secondary CPU, and assign it the specified idle task.
* This also gives us the initial stack to use for this CPU.
*/
@@ -101,43 +96,8 @@
#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
/*
- * Local timer interrupt handling function (can be IPI'ed).
- */
-extern void local_timer_interrupt(void);
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/*
- * Stop a local timer interrupt.
- */
-extern void local_timer_stop(void);
-
-/*
- * Platform provides this to acknowledge a local timer IRQ
- */
-extern int local_timer_ack(void);
-
-#else
-
-static inline void local_timer_stop(void)
-{
-}
-
-#endif
-
-/*
- * Setup a local timer interrupt for a CPU.
- */
-extern void local_timer_setup(void);
-
-/*
* show local interrupt info
*/
extern void show_local_irqs(struct seq_file *);
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
new file mode 100644
index 0000000..2376835
--- /dev/null
+++ b/arch/arm/include/asm/smp_scu.h
@@ -0,0 +1,7 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+unsigned int scu_get_core_count(void __iomem *);
+void scu_enable(void __iomem *);
+
+#endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
new file mode 100644
index 0000000..7be0978
--- /dev/null
+++ b/arch/arm/include/asm/smp_twd.h
@@ -0,0 +1,12 @@
+#ifndef __ASMARM_SMP_TWD_H
+#define __ASMARM_SMP_TWD_H
+
+struct clock_event_device;
+
+extern void __iomem *twd_base;
+
+void twd_timer_stop(void);
+int twd_timer_ack(void);
+void twd_timer_setup(struct clock_event_device *);
+
+#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 11a5197..ff89d0b 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -22,6 +22,8 @@
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
+obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 6014dfd..0d8097f 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -22,6 +22,8 @@
#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
@@ -32,6 +34,7 @@
#include <asm/processor.h>
#include <asm/tlbflush.h>
#include <asm/ptrace.h>
+#include <asm/localtimer.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
@@ -163,7 +166,7 @@
* Take this CPU offline. Once we clear this, we can't return,
* and we must not schedule until we're ready to give up the cpu.
*/
- cpu_clear(cpu, cpu_online_map);
+ set_cpu_online(cpu, false);
/*
* OK - migrate IRQs away from this CPU
@@ -274,9 +277,9 @@
local_fiq_enable();
/*
- * Setup local timer for this CPU.
+ * Setup the percpu timer for this CPU.
*/
- local_timer_setup();
+ percpu_timer_setup();
calibrate_delay();
@@ -285,7 +288,7 @@
/*
* OK, now it's safe to let the boot CPU continue
*/
- cpu_set(cpu, cpu_online_map);
+ set_cpu_online(cpu, true);
/*
* OK, it's off to the idle thread for us
@@ -383,10 +386,16 @@
seq_putc(p, '\n');
}
+/*
+ * Timer (local or broadcast) support
+ */
+static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
+
static void ipi_timer(void)
{
+ struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
irq_enter();
- local_timer_interrupt();
+ evt->event_handler(evt);
irq_exit();
}
@@ -405,6 +414,42 @@
}
#endif
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+static void smp_timer_broadcast(const struct cpumask *mask)
+{
+ send_ipi_message(mask, IPI_TIMER);
+}
+
+static void broadcast_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+}
+
+static void local_timer_setup(struct clock_event_device *evt)
+{
+ evt->name = "dummy_timer";
+ evt->features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_DUMMY;
+ evt->rating = 400;
+ evt->mult = 1;
+ evt->set_mode = broadcast_timer_set_mode;
+ evt->broadcast = smp_timer_broadcast;
+
+ clockevents_register_device(evt);
+}
+#endif
+
+void __cpuinit percpu_timer_setup(void)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
+
+ evt->cpumask = cpumask_of(cpu);
+
+ local_timer_setup(evt);
+}
+
static DEFINE_SPINLOCK(stop_lock);
/*
@@ -417,7 +462,7 @@
dump_stack();
spin_unlock(&stop_lock);
- cpu_clear(cpu, cpu_online_map);
+ set_cpu_online(cpu, false);
local_fiq_disable();
local_irq_disable();
@@ -501,11 +546,6 @@
send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
}
-void smp_timer_broadcast(const struct cpumask *mask)
-{
- send_ipi_message(mask, IPI_TIMER);
-}
-
void smp_send_stop(void)
{
cpumask_t mask = cpu_online_map;
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
new file mode 100644
index 0000000..d3831f6
--- /dev/null
+++ b/arch/arm/kernel/smp_scu.c
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/arm/kernel/smp_scu.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#define SCU_CTRL 0x00
+#define SCU_CONFIG 0x04
+#define SCU_CPU_STATUS 0x08
+#define SCU_INVALIDATE 0x0c
+#define SCU_FPGA_REVISION 0x10
+
+/*
+ * Get the number of CPU cores from the SCU configuration
+ */
+unsigned int __init scu_get_core_count(void __iomem *scu_base)
+{
+ unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
+ return (ncores & 0x03) + 1;
+}
+
+/*
+ * Enable the SCU
+ */
+void __init scu_enable(void __iomem *scu_base)
+{
+ u32 scu_ctrl;
+
+ scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+ scu_ctrl |= 1;
+ __raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+
+ /*
+ * Ensure that the data accessed by CPU0 before the SCU was
+ * initialised is visible to the other CPUs.
+ */
+ flush_cache_all();
+}
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
new file mode 100644
index 0000000..d8c88c6
--- /dev/null
+++ b/arch/arm/kernel/smp_twd.c
@@ -0,0 +1,175 @@
+/*
+ * linux/arch/arm/kernel/smp_twd.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/smp_twd.h>
+#include <asm/hardware/gic.h>
+
+#define TWD_TIMER_LOAD 0x00
+#define TWD_TIMER_COUNTER 0x04
+#define TWD_TIMER_CONTROL 0x08
+#define TWD_TIMER_INTSTAT 0x0C
+
+#define TWD_WDOG_LOAD 0x20
+#define TWD_WDOG_COUNTER 0x24
+#define TWD_WDOG_CONTROL 0x28
+#define TWD_WDOG_INTSTAT 0x2C
+#define TWD_WDOG_RESETSTAT 0x30
+#define TWD_WDOG_DISABLE 0x34
+
+#define TWD_TIMER_CONTROL_ENABLE (1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT (0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
+
+/* set up by the platform code */
+void __iomem *twd_base;
+
+static unsigned long twd_timer_rate;
+
+static void twd_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ unsigned long ctrl;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ /* timer load already set up */
+ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
+ | TWD_TIMER_CONTROL_PERIODIC;
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* period set, and timer enabled in 'next_event' hook */
+ ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ ctrl = 0;
+ }
+
+ __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+}
+
+static int twd_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+
+ ctrl |= TWD_TIMER_CONTROL_ENABLE;
+
+ __raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
+ __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+
+ return 0;
+}
+
+/*
+ * local_timer_ack: checks for a local timer interrupt.
+ *
+ * If a local timer interrupt has occurred, acknowledge and return 1.
+ * Otherwise, return 0.
+ */
+int twd_timer_ack(void)
+{
+ if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
+ __raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+ return 1;
+ }
+
+ return 0;
+}
+
+static void __cpuinit twd_calibrate_rate(void)
+{
+ unsigned long load, count;
+ u64 waitjiffies;
+
+ /*
+ * If this is the first time round, we need to work out how fast
+ * the timer ticks
+ */
+ if (twd_timer_rate == 0) {
+ printk(KERN_INFO "Calibrating local timer... ");
+
+ /* Wait for a tick to start */
+ waitjiffies = get_jiffies_64() + 1;
+
+ while (get_jiffies_64() < waitjiffies)
+ udelay(10);
+
+ /* OK, now the tick has started, let's get the timer going */
+ waitjiffies += 5;
+
+ /* enable, no interrupt or reload */
+ __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
+
+ /* maximum value */
+ __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
+
+ while (get_jiffies_64() < waitjiffies)
+ udelay(10);
+
+ count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
+
+ twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
+
+ printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
+ (twd_timer_rate / 100000) % 100);
+ }
+
+ load = twd_timer_rate / HZ;
+
+ __raw_writel(load, twd_base + TWD_TIMER_LOAD);
+}
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit twd_timer_setup(struct clock_event_device *clk)
+{
+ unsigned long flags;
+
+ twd_calibrate_rate();
+
+ clk->name = "local_timer";
+ clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ clk->rating = 350;
+ clk->set_mode = twd_set_mode;
+ clk->set_next_event = twd_set_next_event;
+ clk->shift = 20;
+ clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
+ clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
+ clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+
+ /* Make sure our local interrupt controller has this enabled */
+ local_irq_save(flags);
+ get_irq_chip(clk->irq)->unmask(clk->irq);
+ local_irq_restore(flags);
+
+ clockevents_register_device(clk);
+}
+
+/*
+ * take a local timer down
+ */
+void __cpuexit twd_timer_stop(void)
+{
+ __raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+}
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index e434510..bac578f 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -43,6 +43,25 @@
#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM)
+/*
+ * Chips have some kind of clocks : group them by functionality
+ */
+#define cpu_has_utmi() ( cpu_is_at91cap9() \
+ || cpu_is_at91sam9rl())
+
+#define cpu_has_800M_plla() (cpu_is_at91sam9g20())
+
+#define cpu_has_pllb() (!cpu_is_at91sam9rl())
+
+#define cpu_has_upll() (0)
+
+/* USB host HS & FS */
+#define cpu_has_uhp() (!cpu_is_at91sam9rl())
+
+/* USB device FS only */
+#define cpu_has_udpfs() (!cpu_is_at91sam9rl())
+
+
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
@@ -140,7 +159,7 @@
};
static struct clk uhpck = {
.name = "uhpck",
- .parent = &pllb,
+ /*.parent = ... we choose parent at runtime */
.mode = pmc_sys_mode,
};
@@ -173,7 +192,11 @@
case AT91_PMC_CSS_PLLA:
return &plla;
case AT91_PMC_CSS_PLLB:
- return &pllb;
+ if (cpu_has_upll())
+ /* CSS_PLLB == CSS_UPLL */
+ return &utmi_clk;
+ else if (cpu_has_pllb())
+ return &pllb;
}
return NULL;
@@ -322,7 +345,7 @@
u32 pckr;
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
+ pckr &= AT91_PMC_CSS; /* clock selection */
pckr |= prescale << 2;
at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
clk->rate_hz = actual;
@@ -361,7 +384,7 @@
}
EXPORT_SYMBOL(clk_set_parent);
-/* establish PCK0..PCK3 parentage and rate */
+/* establish PCK0..PCKN parentage and rate */
static void __init init_programmable_clock(struct clk *clk)
{
struct clk *parent;
@@ -389,11 +412,13 @@
seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
- if (!cpu_is_at91sam9rl())
+ if (cpu_has_pllb())
seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ if (cpu_has_utmi())
seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+ if (cpu_has_upll())
+ seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB));
seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
seq_printf(s, "\n");
@@ -554,16 +579,60 @@
&clk32k,
&main_clk,
&plla,
- &pllb,
-
- /* PLLB children (USB) */
- &udpck,
- &uhpck,
/* MCK */
&mck
};
+/* PLLB generated USB full speed clock init */
+static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
+{
+ /*
+ * USB clock init: choose 48 MHz PLLB value,
+ * disable 48MHz clock during usb peripheral suspend.
+ *
+ * REVISIT: assumes MCK doesn't derive from PLLB!
+ */
+ uhpck.parent = &pllb;
+
+ at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+ pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+ if (cpu_is_at91rm9200()) {
+ uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+ udpck.pmc_mask = AT91RM9200_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ } else if (cpu_is_at91cap9()) {
+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+ }
+ at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+ udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+ uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+}
+
+/* UPLL generated USB full speed clock init */
+static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
+{
+ /*
+ * USB clock init: choose 480 MHz from UPLL,
+ */
+ unsigned int usbr = AT91_PMC_USBS_UPLL;
+
+ /* Setup divider by 10 to reach 48 MHz */
+ usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
+
+ at91_sys_write(AT91_PMC_USB, usbr);
+
+ /* Now set uhpck values */
+ uhpck.parent = &utmi_clk;
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ uhpck.rate_hz = utmi_clk.parent->rate_hz;
+ uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+}
+
int __init at91_clock_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
@@ -585,43 +654,37 @@
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
- if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
- || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
+ if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
+ || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
- /*
- * USB clock init: choose 48 MHz PLLB value,
- * disable 48MHz clock during usb peripheral suspend.
- *
- * REVISIT: assumes MCK doesn't derive from PLLB!
- */
- at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
- pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
- if (cpu_is_at91rm9200()) {
- uhpck.pmc_mask = AT91RM9200_PMC_UHP;
- udpck.pmc_mask = AT91RM9200_PMC_UDP;
- at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- } else if (cpu_is_at91cap9()) {
- uhpck.pmc_mask = AT91CAP9_PMC_UHP;
- }
- at91_sys_write(AT91_CKGR_PLLBR, 0);
- udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
- uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+ if (cpu_has_upll() && !cpu_has_pllb()) {
+ /* setup UTMI clock as the fourth primary clock
+ * (instead of pllb) */
+ utmi_clk.type |= CLK_TYPE_PRIMARY;
+ utmi_clk.id = 3;
+ }
+
/*
* USB HS clock init
*/
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+ if (cpu_has_utmi())
/*
* multiplier is hard-wired to 40
* (obtain the USB High Speed 480 MHz when input is 12 MHz)
*/
utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
- }
+
+ /*
+ * USB FS clock init
+ */
+ if (cpu_has_pllb())
+ at91_pllb_usbfs_clock_init(main_clock);
+ if (cpu_has_upll())
+ /* assumes that we choose UPLL for USB and not PLLA */
+ at91_upll_usbfs_clock_init(main_clock);
/*
* MCK and CPU derive from one of those primary clocks.
@@ -631,21 +694,31 @@
mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
freq = mck.parent->rate_hz;
freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */
- if (cpu_is_at91rm9200())
+ if (cpu_is_at91rm9200()) {
mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
- else if (cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9g20()) {
mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
if (mckr & AT91_PMC_PDIV)
freq /= 2; /* processor clock division */
- } else
+ } else {
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
+ }
/* Register the PMC's standard clocks */
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ if (cpu_has_pllb())
+ list_add_tail(&pllb.node, &clocks);
+
+ if (cpu_has_uhp())
+ list_add_tail(&uhpck.node, &clocks);
+
+ if (cpu_has_udpfs())
+ list_add_tail(&udpck.node, &clocks);
+
+ if (cpu_has_utmi())
list_add_tail(&utmi_clk.node, &clocks);
/* MCK and CPU clock are "always on" */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 9561e33..64589ea 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,7 +23,7 @@
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */
+#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
@@ -39,11 +39,11 @@
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
-#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
+#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
@@ -72,6 +72,7 @@
#define AT91_PMC_CSS_MAIN (1 << 0)
#define AT91_PMC_CSS_PLLA (2 << 0)
#define AT91_PMC_CSS_PLLB (3 << 0)
+#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */
#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
#define AT91_PMC_PRES_1 (0 << 2)
#define AT91_PMC_PRES_2 (1 << 2)
@@ -88,12 +89,25 @@
#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
-#define AT91SAM9_PMC_MDIV_6 (3 << 8)
+#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */
+#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */
#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */
#define AT91_PMC_PDIV_1 (0 << 12)
#define AT91_PMC_PDIV_2 (1 << 12)
+#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */
+#define AT91_PMC_PLLADIV2_OFF (0 << 12)
+#define AT91_PMC_PLLADIV2_ON (1 << 12)
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
+#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */
+#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */
+#define AT91_PMC_USBS_PLLA (0 << 0)
+#define AT91_PMC_USBS_UPLL (1 << 0)
+#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */
+
+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
+#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */
+#define AT91_PMC_CSSMCK_CSS (0 << 8)
+#define AT91_PMC_CSSMCK_MCK (1 << 8)
#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
@@ -102,7 +116,7 @@
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */
#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a9c78bc..be747f5 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -1,11 +1,26 @@
if ARCH_DAVINCI
+config AINTC
+ bool
+
+config CP_INTC
+ bool
+
menu "TI DaVinci Implementations"
comment "DaVinci Core Type"
config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
+ select AINTC
+
+config ARCH_DAVINCI_DM355
+ bool "DaVinci 355 based system"
+ select AINTC
+
+config ARCH_DAVINCI_DM646x
+ bool "DaVinci 646x based system"
+ select AINTC
comment "DaVinci Board Type"
@@ -17,6 +32,34 @@
Configure this option to specify the whether the board used
for development is a DM644x EVM
+config MACH_SFFSDR
+ bool "Lyrtech SFFSDR"
+ depends on ARCH_DAVINCI_DM644x
+ help
+ Say Y here to select the Lyrtech Small Form Factor
+ Software Defined Radio (SFFSDR) board.
+
+config MACH_DAVINCI_DM355_EVM
+ bool "TI DM355 EVM"
+ depends on ARCH_DAVINCI_DM355
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+ bool "DM355 Leopard board"
+ depends on ARCH_DAVINCI_DM355
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+ bool "TI DM6467 EVM"
+ depends on ARCH_DAVINCI_DM646x
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM6467 EVM
+
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 1674661..059ab78 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,13 +4,22 @@
#
# Common objects
-obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
- gpio.o devices.o dma.o usb.o
+obj-y := time.o clock.o serial.o io.o psc.o \
+ gpio.o devices.o dma.o usb.o common.o sram.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
# Chip specific
obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o
+
+obj-$(CONFIG_AINTC) += irq.o
+obj-$(CONFIG_CP_INTC) += cp_intc.o
# Board specific
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
+obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o
+obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o
+obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o
+obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
new file mode 100644
index 0000000..5ac2f56
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -0,0 +1,298 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+/* NOTE: this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+ {
+ /* UBL (a few copies) plus U-Boot */
+ .name = "bootloader",
+ .offset = 0,
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ /* U-Boot environment */
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * NAND_BLOCK_SIZE,
+ .mask_flags = 0,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+ .mask_chipsel = BIT(14),
+ .parts = davinci_nand_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
+ .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_nand_device = {
+ .name = "davinci_nand",
+ .id = 0,
+
+ .num_resources = ARRAY_SIZE(davinci_nand_resources),
+ .resource = davinci_nand_resources,
+
+ .dev = {
+ .platform_data = &davinci_nand_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 400 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static int dm355evm_mmc_gpios = -EINVAL;
+
+static void dm355evm_mmcsd_gpios(unsigned gpio)
+{
+ gpio_request(gpio + 0, "mmc0_ro");
+ gpio_request(gpio + 1, "mmc0_cd");
+ gpio_request(gpio + 2, "mmc1_ro");
+ gpio_request(gpio + 3, "mmc1_cd");
+
+ /* we "know" these are input-only so we don't
+ * need to call gpio_direction_input()
+ */
+
+ dm355evm_mmc_gpios = gpio;
+}
+
+static struct i2c_board_info dm355evm_i2c_info[] = {
+ { I2C_BOARD_INFO("dm355evm_msp", 0x25),
+ .platform_data = dm355evm_mmcsd_gpios,
+ /* plus irq */ },
+ /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+ /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+
+ gpio_request(5, "dm355evm_msp");
+ gpio_direction_input(5);
+ dm355evm_i2c_info[0].irq = gpio_to_irq(5);
+
+ i2c_register_board_info(1, dm355evm_i2c_info,
+ ARRAY_SIZE(dm355evm_i2c_info));
+}
+
+static struct resource dm355evm_dm9000_rsrc[] = {
+ {
+ /* addr */
+ .start = 0x04014000,
+ .end = 0x04014001,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /* data */
+ .start = 0x04014002,
+ .end = 0x04014003,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ
+ | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+ },
+};
+
+static struct platform_device dm355evm_dm9000 = {
+ .name = "dm9000",
+ .id = -1,
+ .resource = dm355evm_dm9000_rsrc,
+ .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+ &dm355evm_dm9000,
+ &davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_evm_map_io(void)
+{
+ dm355_init();
+}
+
+static int dm355evm_mmc_get_cd(int module)
+{
+ if (!gpio_is_valid(dm355evm_mmc_gpios))
+ return -ENXIO;
+ /* low == card present */
+ return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
+}
+
+static int dm355evm_mmc_get_ro(int module)
+{
+ if (!gpio_is_valid(dm355evm_mmc_gpios))
+ return -ENXIO;
+ /* high == card's write protect switch active */
+ return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355evm_mmc_config = {
+ .get_cd = dm355evm_mmc_get_cd,
+ .get_ro = dm355evm_mmc_get_ro,
+ .wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+ .version = MMC_CTLR_VERSION_1,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender. If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE 0 /* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE 1 /* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+ .byte_len = SZ_64K / 8,
+ .name = "at25640a",
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+ {
+ .modalias = "at25",
+ .platform_data = &at25640a,
+ .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static __init void dm355_evm_init(void)
+{
+ struct clk *aemif;
+
+ gpio_request(1, "dm9000");
+ gpio_direction_input(1);
+ dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
+
+ aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
+ if (IS_ERR(aemif))
+ WARN("%s: unable to get AEMIF clock\n", __func__);
+ else
+ clk_enable(aemif);
+
+ platform_add_devices(davinci_evm_devices,
+ ARRAY_SIZE(davinci_evm_devices));
+ evm_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ /* NOTE: NAND flash timings set by the UBL are slower than
+ * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+ * but could be 0x0400008c for about 25% faster page reads.
+ */
+
+ gpio_request(2, "usb_id_toggle");
+ gpio_direction_output(2, USB_ID_VALUE);
+ /* irlml6401 switches over 1A in under 8 msec */
+ setup_usb(500, 8);
+
+ davinci_setup_mmc(0, &dm355evm_mmc_config);
+ davinci_setup_mmc(1, &dm355evm_mmc_config);
+
+ dm355_init_spi0(BIT(0), dm355_evm_spi_info,
+ ARRAY_SIZE(dm355_evm_spi_info));
+}
+
+static __init void dm355_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = dm355_evm_map_io,
+ .init_irq = dm355_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = dm355_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
new file mode 100644
index 0000000..28c9008
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -0,0 +1,296 @@
+/*
+ * DM355 leopard board support
+ *
+ * Based on board-dm355-evm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+/* NOTE: this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+ {
+ /* UBL (a few copies) plus U-Boot */
+ .name = "bootloader",
+ .offset = 0,
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ /* U-Boot environment */
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * NAND_BLOCK_SIZE,
+ .mask_flags = 0,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+ .mask_chipsel = BIT(14),
+ .parts = davinci_nand_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
+ .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_nand_device = {
+ .name = "davinci_nand",
+ .id = 0,
+
+ .num_resources = ARRAY_SIZE(davinci_nand_resources),
+ .resource = davinci_nand_resources,
+
+ .dev = {
+ .platform_data = &davinci_nand_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 400 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static int leopard_mmc_gpio = -EINVAL;
+
+static void dm355leopard_mmcsd_gpios(unsigned gpio)
+{
+ gpio_request(gpio + 0, "mmc0_ro");
+ gpio_request(gpio + 1, "mmc0_cd");
+ gpio_request(gpio + 2, "mmc1_ro");
+ gpio_request(gpio + 3, "mmc1_cd");
+
+ /* we "know" these are input-only so we don't
+ * need to call gpio_direction_input()
+ */
+
+ leopard_mmc_gpio = gpio;
+}
+
+static struct i2c_board_info dm355leopard_i2c_info[] = {
+ { I2C_BOARD_INFO("dm355leopard_msp", 0x25),
+ .platform_data = dm355leopard_mmcsd_gpios,
+ /* plus irq */ },
+ /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+ /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init leopard_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+
+ gpio_request(5, "dm355leopard_msp");
+ gpio_direction_input(5);
+ dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
+
+ i2c_register_board_info(1, dm355leopard_i2c_info,
+ ARRAY_SIZE(dm355leopard_i2c_info));
+}
+
+static struct resource dm355leopard_dm9000_rsrc[] = {
+ {
+ /* addr */
+ .start = 0x04000000,
+ .end = 0x04000001,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /* data */
+ .start = 0x04000016,
+ .end = 0x04000017,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ
+ | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+ },
+};
+
+static struct platform_device dm355leopard_dm9000 = {
+ .name = "dm9000",
+ .id = -1,
+ .resource = dm355leopard_dm9000_rsrc,
+ .num_resources = ARRAY_SIZE(dm355leopard_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_leopard_devices[] __initdata = {
+ &dm355leopard_dm9000,
+ &davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_leopard_map_io(void)
+{
+ dm355_init();
+}
+
+static int dm355leopard_mmc_get_cd(int module)
+{
+ if (!gpio_is_valid(leopard_mmc_gpio))
+ return -ENXIO;
+ /* low == card present */
+ return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
+}
+
+static int dm355leopard_mmc_get_ro(int module)
+{
+ if (!gpio_is_valid(leopard_mmc_gpio))
+ return -ENXIO;
+ /* high == card's write protect switch active */
+ return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355leopard_mmc_config = {
+ .get_cd = dm355leopard_mmc_get_cd,
+ .get_ro = dm355leopard_mmc_get_ro,
+ .wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender. If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE 0 /* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE 1 /* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+ .byte_len = SZ_64K / 8,
+ .name = "at25640a",
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+ {
+ .modalias = "at25",
+ .platform_data = &at25640a,
+ .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static __init void dm355_leopard_init(void)
+{
+ struct clk *aemif;
+
+ gpio_request(9, "dm9000");
+ gpio_direction_input(9);
+ dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
+
+ aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
+ if (IS_ERR(aemif))
+ WARN("%s: unable to get AEMIF clock\n", __func__);
+ else
+ clk_enable(aemif);
+
+ platform_add_devices(davinci_leopard_devices,
+ ARRAY_SIZE(davinci_leopard_devices));
+ leopard_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ /* NOTE: NAND flash timings set by the UBL are slower than
+ * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+ * but could be 0x0400008c for about 25% faster page reads.
+ */
+
+ gpio_request(2, "usb_id_toggle");
+ gpio_direction_output(2, USB_ID_VALUE);
+ /* irlml6401 switches over 1A in under 8 msec */
+ setup_usb(500, 8);
+
+ davinci_setup_mmc(0, &dm355leopard_mmc_config);
+ davinci_setup_mmc(1, &dm355leopard_mmc_config);
+
+ dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
+ ARRAY_SIZE(dm355_leopard_spi_info));
+}
+
+static __init void dm355_leopard_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = dm355_leopard_map_io,
+ .init_irq = dm355_leopard_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = dm355_leopard_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index b2e7f9c..d9d4045 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,12 +16,11 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/memory.h>
-#include <linux/etherdevice.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
-
+#include <linux/etherdevice.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -44,6 +43,9 @@
#include <mach/mux.h>
#include <mach/psc.h>
#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
@@ -436,45 +438,15 @@
* - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
* - ... newer boards may have more
*/
-static struct memory_accessor *at24_mem_acc;
-
-static void at24_setup(struct memory_accessor *mem_acc, void *context)
-{
- DECLARE_MAC_BUF(mac_str);
- char mac_addr[6];
-
- at24_mem_acc = mem_acc;
-
- /* Read MAC addr from EEPROM */
- if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
- printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
- print_mac(mac_str, mac_addr));
- }
-}
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
- .setup = at24_setup,
+ .setup = davinci_get_mac_addr,
+ .context = (void *)0x7f00,
};
-int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
-{
- if (at24_mem_acc)
- return at24_mem_acc->read(at24_mem_acc, buf, off, count);
- return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_read);
-
-int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
-{
- if (at24_mem_acc)
- return at24_mem_acc->write(at24_mem_acc, buf, off, count);
- return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_write);
-
/*
* MSP430 supports RTC, card detection, input from IR remote, and
* a bit more. It triggers interrupts on GPIO(7) from pressing
@@ -545,6 +517,27 @@
return (buf[3] << 8) | buf[2];
}
+static int dm6444evm_mmc_get_cd(int module)
+{
+ int status = dm6444evm_msp430_get_pins();
+
+ return (status < 0) ? status : !(status & BIT(1));
+}
+
+static int dm6444evm_mmc_get_ro(int module)
+{
+ int status = dm6444evm_msp430_get_pins();
+
+ return (status < 0) ? status : status & BIT(6 + 8);
+}
+
+static struct davinci_mmc_config dm6446evm_mmc_config = {
+ .get_cd = dm6444evm_mmc_get_cd,
+ .get_ro = dm6444evm_mmc_get_ro,
+ .wires = 4,
+ .version = MMC_CTLR_VERSION_1
+};
+
static struct i2c_board_info __initdata i2c_info[] = {
{
I2C_BOARD_INFO("dm6446evm_msp", 0x23),
@@ -598,7 +591,6 @@
static void __init
davinci_evm_map_io(void)
{
- davinci_map_common_io();
dm644x_init();
}
@@ -639,6 +631,7 @@
static __init void davinci_evm_init(void)
{
struct clk *aemif_clk;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
aemif_clk = clk_get(NULL, "aemif");
clk_enable(aemif_clk);
@@ -671,8 +664,13 @@
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
+ davinci_setup_mmc(0, &dm6446evm_mmc_config);
+
davinci_serial_init(&uart_config);
+ soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
+
/* Register the fixup for PHY on DaVinci */
phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
davinci_phy_fixup);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
new file mode 100644
index 0000000..e17de63
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -0,0 +1,262 @@
+/*
+ * TI DaVinci DM646X EVM board
+ *
+ * Derived from: arch/arm/mach-davinci/board-evm.c
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * (C) 2007-2008, MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/etherdevice.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm646x.h>
+#include <mach/common.h>
+#include <mach/psc.h>
+#include <mach/serial.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
+
+#define DM646X_EVM_PHY_MASK (0x2)
+#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+/* LEDS */
+
+static struct gpio_led evm_leds[] = {
+ { .name = "DS1", .active_low = 1, },
+ { .name = "DS2", .active_low = 1, },
+ { .name = "DS3", .active_low = 1, },
+ { .name = "DS4", .active_low = 1, },
+};
+
+static __initconst struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int evm_led_setup(struct i2c_client *client, int gpio,
+ unsigned int ngpio, void *c)
+{
+ struct gpio_led *leds = evm_leds;
+ int status;
+
+ while (ngpio--) {
+ leds->gpio = gpio++;
+ leds++;
+ };
+
+ evm_led_dev = platform_device_alloc("leds-gpio", 0);
+ platform_device_add_data(evm_led_dev, &evm_led_data,
+ sizeof(evm_led_data));
+
+ evm_led_dev->dev.parent = &client->dev;
+ status = platform_device_add(evm_led_dev);
+ if (status < 0) {
+ platform_device_put(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return status;
+}
+
+static int evm_led_teardown(struct i2c_client *client, int gpio,
+ unsigned ngpio, void *c)
+{
+ if (evm_led_dev) {
+ platform_device_unregister(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return 0;
+}
+
+static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
+
+static int evm_sw_setup(struct i2c_client *client, int gpio,
+ unsigned ngpio, void *c)
+{
+ int status;
+ int i;
+ char label[10];
+
+ for (i = 0; i < 4; ++i) {
+ snprintf(label, 10, "user_sw%d", i);
+ status = gpio_request(gpio, label);
+ if (status)
+ goto out_free;
+ evm_sw_gpio[i] = gpio++;
+
+ status = gpio_direction_input(evm_sw_gpio[i]);
+ if (status) {
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ goto out_free;
+ }
+
+ status = gpio_export(evm_sw_gpio[i], 0);
+ if (status) {
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ goto out_free;
+ }
+ }
+ return status;
+out_free:
+ for (i = 0; i < 4; ++i) {
+ if (evm_sw_gpio[i] != -EINVAL) {
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ }
+ }
+ return status;
+}
+
+static int evm_sw_teardown(struct i2c_client *client, int gpio,
+ unsigned ngpio, void *c)
+{
+ int i;
+
+ for (i = 0; i < 4; ++i) {
+ if (evm_sw_gpio[i] != -EINVAL) {
+ gpio_unexport(evm_sw_gpio[i]);
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int evm_pcf_setup(struct i2c_client *client, int gpio,
+ unsigned int ngpio, void *c)
+{
+ int status;
+
+ if (ngpio < 8)
+ return -EINVAL;
+
+ status = evm_sw_setup(client, gpio, 4, c);
+ if (status)
+ return status;
+
+ return evm_led_setup(client, gpio+4, 4, c);
+}
+
+static int evm_pcf_teardown(struct i2c_client *client, int gpio,
+ unsigned int ngpio, void *c)
+{
+ BUG_ON(ngpio < 8);
+
+ evm_sw_teardown(client, gpio, 4, c);
+ evm_led_teardown(client, gpio+4, 4, c);
+
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data = {
+ .gpio_base = DAVINCI_N_GPIO+1,
+ .setup = evm_pcf_setup,
+ .teardown = evm_pcf_teardown,
+};
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ * - 0x7f00, 6 bytes Ethernet Address
+ * - ... newer boards may have more
+ */
+
+static struct at24_platform_data eeprom_info = {
+ .byte_len = (256*1024) / 8,
+ .page_size = 64,
+ .flags = AT24_FLAG_ADDR16,
+ .setup = davinci_get_mac_addr,
+ .context = (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("24c256", 0x50),
+ .platform_data = &eeprom_info,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574a", 0x38),
+ .platform_data = &pcf_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 100 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static void __init davinci_map_io(void)
+{
+ dm646x_init();
+}
+
+static __init void evm_init(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ evm_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+}
+
+static __init void davinci_dm646x_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = davinci_map_io,
+ .init_irq = davinci_dm646x_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = evm_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
new file mode 100644
index 0000000..748a8e4
--- /dev/null
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -0,0 +1,189 @@
+/*
+ * Lyrtech SFFSDR board support.
+ *
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on DV-EVM platform, original copyright follows:
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/etherdevice.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/common.h>
+
+#define SFFSDR_PHY_MASK (0x2)
+#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+ /* U-Boot Environment: Block 0
+ * UBL: Block 1
+ * U-Boot: Blocks 6-7 (256 kb)
+ * Integrity Kernel: Blocks 8-31 (3 Mb)
+ * Integrity Data: Blocks 100-END
+ */
+ {
+ .name = "Linux Kernel",
+ .offset = 32 * SZ_128K,
+ .size = 16 * SZ_128K, /* 2 Mb */
+ .mask_flags = MTD_WRITEABLE, /* Force read-only */
+ },
+ {
+ .name = "Linux ROOT",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 256 * SZ_128K, /* 32 Mb */
+ .mask_flags = 0, /* R/W */
+ },
+};
+
+static struct flash_platform_data davinci_sffsdr_nandflash_data = {
+ .parts = davinci_sffsdr_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
+};
+
+static struct resource davinci_sffsdr_nandflash_resource[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_sffsdr_nandflash_device = {
+ .name = "davinci_nand", /* Name of driver */
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_sffsdr_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
+ .resource = davinci_sffsdr_nandflash_resource,
+};
+
+static struct emac_platform_data sffsdr_emac_pdata = {
+ .phy_mask = SFFSDR_PHY_MASK,
+ .mdio_max_freq = SFFSDR_MDIO_FREQUENCY,
+};
+
+static struct at24_platform_data eeprom_info = {
+ .byte_len = (64*1024) / 8,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("24lc64", 0x50),
+ .platform_data = &eeprom_info,
+ },
+ /* Other I2C devices:
+ * MSP430, addr 0x23 (not used)
+ * PCA9543, addr 0x70 (setup done by U-Boot)
+ * ADS7828, addr 0x48 (ADC for voltage monitoring.)
+ */
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 20 /* kHz */,
+ .bus_delay = 100 /* usec */,
+};
+
+static void __init sffsdr_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_sffsdr_devices[] __initdata = {
+ &davinci_sffsdr_nandflash_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_sffsdr_map_io(void)
+{
+ dm644x_init();
+}
+
+static __init void davinci_sffsdr_init(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ platform_add_devices(davinci_sffsdr_devices,
+ ARRAY_SIZE(davinci_sffsdr_devices));
+ sffsdr_init_i2c();
+ davinci_serial_init(&uart_config);
+ soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
+ setup_usb(0, 0); /* We support only peripheral mode. */
+
+ /* mux VLYNQ pins */
+ davinci_cfg_reg(DM644X_VLYNQEN);
+ davinci_cfg_reg(DM644X_VLYNQWD);
+}
+
+static __init void davinci_sffsdr_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
+ /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .map_io = davinci_sffsdr_map_io,
+ .init_irq = davinci_sffsdr_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = davinci_sffsdr_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index f0baaa1..39bf321 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -42,7 +42,8 @@
if (clk->parent)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
- davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
+ davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+ clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
@@ -50,7 +51,8 @@
if (WARN_ON(clk->usecount == 0))
return;
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
- davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+ davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+ clk->lpsc, 0);
if (clk->parent)
__clk_disable(clk->parent);
}
@@ -164,11 +166,11 @@
continue;
/* ignore if in Disabled or SwRstDisable states */
- if (!davinci_psc_is_clk_active(ck->lpsc))
+ if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
continue;
pr_info("Clocks: disable unused %s\n", ck->name);
- davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
+ davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
}
spin_unlock_irq(&clockfw_lock);
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 35736ec..27233cb 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -67,6 +67,7 @@
u8 usecount;
u8 flags;
u8 lpsc;
+ u8 psc_ctlr;
struct clk *parent;
struct pll_data *pll_data;
u32 div_reg;
@@ -93,4 +94,7 @@
}
int davinci_clk_init(struct davinci_clk *clocks);
+
+extern struct platform_device davinci_wdt_device;
+
#endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
new file mode 100644
index 0000000..61ede19
--- /dev/null
+++ b/arch/arm/mach-davinci/common.c
@@ -0,0 +1,108 @@
+/*
+ * Code commons to all DaVinci SoCs.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+
+#include <asm/tlb.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/emac.h>
+
+#include "clock.h"
+
+struct davinci_soc_info davinci_soc_info;
+EXPORT_SYMBOL(davinci_soc_info);
+
+void __iomem *davinci_intc_base;
+int davinci_intc_type;
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+{
+ char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+ off_t offset = (off_t)context;
+
+ /* Read MAC addr from EEPROM */
+ if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+ pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
+}
+
+static struct davinci_id * __init davinci_get_id(u32 jtag_id)
+{
+ int i;
+ struct davinci_id *dip;
+ u8 variant = (jtag_id & 0xf0000000) >> 28;
+ u16 part_no = (jtag_id & 0x0ffff000) >> 12;
+
+ for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num;
+ i++, dip++)
+ /* Don't care about the manufacturer right now */
+ if ((dip->part_no == part_no) && (dip->variant == variant))
+ return dip;
+
+ return NULL;
+}
+
+void __init davinci_common_init(struct davinci_soc_info *soc_info)
+{
+ int ret;
+ struct davinci_id *dip;
+
+ if (!soc_info) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info));
+
+ if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0))
+ iotable_init(davinci_soc_info.io_desc,
+ davinci_soc_info.io_desc_num);
+
+ /*
+ * Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but we must also do it here because of the CPU
+ * revision check below.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*
+ * We want to check CPU revision early for cpu_is_xxxx() macros.
+ * IO space mapping must be initialized before we can do that.
+ */
+ davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base);
+
+ dip = davinci_get_id(davinci_soc_info.jtag_id);
+ if (!dip) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ davinci_soc_info.cpu_id = dip->cpu_id;
+ pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant);
+
+ if (davinci_soc_info.cpu_clks) {
+ ret = davinci_clk_init(davinci_soc_info.cpu_clks);
+
+ if (ret != 0)
+ goto err;
+ }
+
+ davinci_intc_base = davinci_soc_info.intc_base;
+ davinci_intc_type = davinci_soc_info.intc_type;
+ return;
+
+err:
+ pr_err("davinci_common_init: SoC Initialization failed\n");
+}
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
new file mode 100644
index 0000000..96c8e97
--- /dev/null
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -0,0 +1,161 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) driver
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/cp_intc.h>
+
+static void __iomem *cp_intc_base;
+
+static inline unsigned int cp_intc_read(unsigned offset)
+{
+ return __raw_readl(cp_intc_base + offset);
+}
+
+static inline void cp_intc_write(unsigned long value, unsigned offset)
+{
+ __raw_writel(value, cp_intc_base + offset);
+}
+
+static void cp_intc_ack_irq(unsigned int irq)
+{
+ cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR);
+}
+
+/* Disable interrupt */
+static void cp_intc_mask_irq(unsigned int irq)
+{
+ /* XXX don't know why we need to disable nIRQ here... */
+ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
+ cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR);
+ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+}
+
+/* Enable interrupt */
+static void cp_intc_unmask_irq(unsigned int irq)
+{
+ cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET);
+}
+
+static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
+{
+ unsigned reg = BIT_WORD(irq);
+ unsigned mask = BIT_MASK(irq);
+ unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg));
+ unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg));
+
+ switch (flow_type) {
+ case IRQ_TYPE_EDGE_RISING:
+ polarity |= mask;
+ type |= mask;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ polarity &= ~mask;
+ type |= mask;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ polarity |= mask;
+ type &= ~mask;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ polarity &= ~mask;
+ type &= ~mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
+ cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
+
+ return 0;
+}
+
+static struct irq_chip cp_intc_irq_chip = {
+ .name = "cp_intc",
+ .ack = cp_intc_ack_irq,
+ .mask = cp_intc_mask_irq,
+ .unmask = cp_intc_unmask_irq,
+ .set_type = cp_intc_set_irq_type,
+};
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+ u8 *irq_prio)
+{
+ unsigned num_reg = BITS_TO_LONGS(num_irq);
+ int i;
+
+ cp_intc_base = base;
+
+ cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
+
+ /* Disable all host interrupts */
+ cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
+
+ /* Disable system interrupts */
+ for (i = 0; i < num_reg; i++)
+ cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
+
+ /* Set to normal mode, no nesting, no priority hold */
+ cp_intc_write(0, CP_INTC_CTRL);
+ cp_intc_write(0, CP_INTC_HOST_CTRL);
+
+ /* Clear system interrupt status */
+ for (i = 0; i < num_reg; i++)
+ cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
+
+ /* Enable nIRQ (what about nFIQ?) */
+ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+
+ /*
+ * Priority is determined by host channel: lower channel number has
+ * higher priority i.e. channel 0 has highest priority and channel 31
+ * had the lowest priority.
+ */
+ num_reg = (num_irq + 3) >> 2; /* 4 channels per register */
+ if (irq_prio) {
+ unsigned j, k;
+ u32 val;
+
+ for (k = i = 0; i < num_reg; i++) {
+ for (val = j = 0; j < 4; j++, k++) {
+ val >>= 8;
+ if (k < num_irq)
+ val |= irq_prio[k] << 24;
+ }
+
+ cp_intc_write(val, CP_INTC_CHAN_MAP(i));
+ }
+ } else {
+ /*
+ * Default everything to channel 15 if priority not specified.
+ * Note that channel 0-1 are mapped to nFIQ and channels 2-31
+ * are mapped to nIRQ.
+ */
+ for (i = 0; i < num_reg; i++)
+ cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
+ }
+
+ /* Set up genirq dispatching for cp_intc */
+ for (i = 0; i < num_irq; i++) {
+ set_irq_chip(i, &cp_intc_irq_chip);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ set_irq_handler(i, handle_edge_irq);
+ }
+
+ /* Enable global interrupt */
+ cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
+}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a31370b..de16f34 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,8 +23,14 @@
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/mux.h>
+#include <mach/edma.h>
+#include <mach/mmc.h>
+#include <mach/time.h>
#define DAVINCI_I2C_BASE 0x01C21000
+#define DAVINCI_MMCSD0_BASE 0x01E10000
+#define DM355_MMCSD0_BASE 0x01E11000
+#define DM355_MMCSD1_BASE 0x01E00000
static struct resource i2c_resources[] = {
{
@@ -54,3 +60,208 @@
(void) platform_device_register(&davinci_i2c_device);
}
+#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+
+static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd0_resources[] = {
+ {
+ /* different on dm355 */
+ .start = DAVINCI_MMCSD0_BASE,
+ .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /* IRQs: MMC/SD, then SDIO */
+ {
+ .start = IRQ_MMCINT,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ /* different on dm355 */
+ .start = IRQ_SDIOINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* DMA channels: RX, then TX */
+ {
+ .start = DAVINCI_DMA_MMCRXEVT,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = DAVINCI_DMA_MMCTXEVT,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device davinci_mmcsd0_device = {
+ .name = "davinci_mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmcsd0_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(mmcsd0_resources),
+ .resource = mmcsd0_resources,
+};
+
+static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd1_resources[] = {
+ {
+ .start = DM355_MMCSD1_BASE,
+ .end = DM355_MMCSD1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /* IRQs: MMC/SD, then SDIO */
+ {
+ .start = IRQ_DM355_MMCINT1,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_DM355_SDIOINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* DMA channels: RX, then TX */
+ {
+ .start = 30, /* rx */
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = 31, /* tx */
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device davinci_mmcsd1_device = {
+ .name = "davinci_mmc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmcsd1_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(mmcsd1_resources),
+ .resource = mmcsd1_resources,
+};
+
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+ struct platform_device *pdev = NULL;
+
+ if (WARN_ON(cpu_is_davinci_dm646x()))
+ return;
+
+ /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
+ * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
+ *
+ * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
+ * not handled right here ...
+ */
+ switch (module) {
+ case 1:
+ if (!cpu_is_davinci_dm355())
+ break;
+
+ /* REVISIT we may not need all these pins if e.g. this
+ * is a hard-wired SDIO device...
+ */
+ davinci_cfg_reg(DM355_SD1_CMD);
+ davinci_cfg_reg(DM355_SD1_CLK);
+ davinci_cfg_reg(DM355_SD1_DATA0);
+ davinci_cfg_reg(DM355_SD1_DATA1);
+ davinci_cfg_reg(DM355_SD1_DATA2);
+ davinci_cfg_reg(DM355_SD1_DATA3);
+
+ pdev = &davinci_mmcsd1_device;
+ break;
+ case 0:
+ if (cpu_is_davinci_dm355()) {
+ mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
+ mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
+ mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
+
+ /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */
+ davinci_cfg_reg(DM355_MMCSD0);
+
+ /* enable RX EDMA */
+ davinci_cfg_reg(DM355_EVT26_MMC0_RX);
+ }
+
+ else if (cpu_is_davinci_dm644x()) {
+ /* REVISIT: should this be in board-init code? */
+ void __iomem *base =
+ IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+ /* Power-on 3.3V IO cells */
+ __raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
+ /*Set up the pull regiter for MMC */
+ davinci_cfg_reg(DM644X_MSTK);
+ }
+
+ pdev = &davinci_mmcsd0_device;
+ break;
+ }
+
+ if (WARN_ON(!pdev))
+ return;
+
+ pdev->dev.platform_data = config;
+ platform_device_register(pdev);
+}
+
+#else
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct resource wdt_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device davinci_wdt_device = {
+ .name = "watchdog",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(wdt_resources),
+ .resource = wdt_resources,
+};
+
+static void davinci_init_wdt(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
+ wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
+
+ platform_device_register(&davinci_wdt_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct davinci_timer_instance davinci_timer_instance[2] = {
+ {
+ .base = IO_ADDRESS(DAVINCI_TIMER0_BASE),
+ .bottom_irq = IRQ_TINT0_TINT12,
+ .top_irq = IRQ_TINT0_TINT34,
+ },
+ {
+ .base = IO_ADDRESS(DAVINCI_TIMER1_BASE),
+ .bottom_irq = IRQ_TINT1_TINT12,
+ .top_irq = IRQ_TINT1_TINT34,
+ },
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init davinci_init_devices(void)
+{
+ /* please keep these calls, and their implementations above,
+ * in alphabetical order so they're easier to sort through.
+ */
+ davinci_init_wdt();
+
+ return 0;
+}
+arch_initcall(davinci_init_devices);
+
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
new file mode 100644
index 0000000..baaaf32
--- /dev/null
+++ b/arch/arm/mach-davinci/dm355.c
@@ -0,0 +1,730 @@
+/*
+ * TI DaVinci DM355 chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm355.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM355_UART2_BASE (IO_PHYS + 0x206000)
+
+/*
+ * Device specific clocks
+ */
+#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+ .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+ .flags = PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ /* FIXME -- crystal rate is board-specific */
+ .rate = DM355_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .flags = CLK_PLL,
+ .pll_data = &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+ .name = "pll1_sysclk4",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk vpss_dac_clk = {
+ .name = "vpss_dac",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM355_LPSC_VPSS_DAC,
+};
+
+static struct clk vpss_master_clk = {
+ .name = "vpss_master",
+ .parent = &pll1_sysclk4,
+ .lpsc = DAVINCI_LPSC_VPSSMSTR,
+ .flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+ .name = "vpss_slave",
+ .parent = &pll1_sysclk4,
+ .lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+
+static struct clk clkout1_clk = {
+ .name = "clkout1",
+ .parent = &pll1_aux_clk,
+ /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */
+};
+
+static struct clk clkout2_clk = {
+ .name = "clkout2",
+ .parent = &pll1_sysclkbp,
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2",
+ .parent = &ref_clk,
+ .flags = CLK_PLL,
+ .pll_data = &pll2_data,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclkbp = {
+ .name = "pll2_sysclkbp",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk clkout3_clk = {
+ .name = "clkout3",
+ .parent = &pll2_sysclkbp,
+ /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */
+};
+
+static struct clk arm_clk = {
+ .name = "arm_clk",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+/*
+ * NOT LISTED below, and not touched by Linux
+ * - in SyncReset state by default
+ * .lpsc = DAVINCI_LPSC_TPCC,
+ * .lpsc = DAVINCI_LPSC_TPTC0,
+ * .lpsc = DAVINCI_LPSC_TPTC1,
+ * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
+ * .lpsc = DAVINCI_LPSC_MEMSTICK,
+ * - in Enabled state by default
+ * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
+ * .lpsc = DAVINCI_LPSC_SCR2, // "bus"
+ * .lpsc = DAVINCI_LPSC_SCR3, // "bus"
+ * .lpsc = DAVINCI_LPSC_SCR4, // "bus"
+ * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation"
+ * .lpsc = DAVINCI_LPSC_CFG27, // "test"
+ * .lpsc = DAVINCI_LPSC_CFG3, // "test"
+ * .lpsc = DAVINCI_LPSC_CFG5, // "test"
+ */
+
+static struct clk mjcp_clk = {
+ .name = "mjcp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_IMCOP,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+ .name = "i2c",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk asp0_clk = {
+ .name = "asp0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk asp1_clk = {
+ .name = "asp1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_McBSP1,
+};
+
+static struct clk mmcsd0_clk = {
+ .name = "mmcsd0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+ .name = "mmcsd1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+ .name = "spi0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+ .name = "spi1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+ .name = "spi2",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_SPI2,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+ .name = "pwm2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+ .name = "pwm3",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER2,
+ .usecount = 1, /* REVISIT: why cant' this be disabled? */
+};
+
+static struct clk timer3_clk = {
+ .name = "timer3",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_TIMER3,
+};
+
+static struct clk rto_clk = {
+ .name = "rto",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_RTO,
+};
+
+static struct clk usb_clk = {
+ .name = "usb",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct davinci_clk dm355_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+ CLK(NULL, "vpss_dac", &vpss_dac_clk),
+ CLK(NULL, "vpss_master", &vpss_master_clk),
+ CLK(NULL, "vpss_slave", &vpss_slave_clk),
+ CLK(NULL, "clkout1", &clkout1_clk),
+ CLK(NULL, "clkout2", &clkout2_clk),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+ CLK(NULL, "clkout3", &clkout3_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "mjcp", &mjcp_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK("soc-audio.0", NULL, &asp0_clk),
+ CLK("soc-audio.1", NULL, &asp1_clk),
+ CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+ CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+ CLK(NULL, "spi0", &spi0_clk),
+ CLK(NULL, "spi1", &spi1_clk),
+ CLK(NULL, "spi2", &spi2_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "pwm2", &pwm2_clk),
+ CLK(NULL, "pwm3", &pwm3_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, "timer3", &timer3_clk),
+ CLK(NULL, "rto", &rto_clk),
+ CLK(NULL, "usb", &usb_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource dm355_spi0_resources[] = {
+ {
+ .start = 0x01c66000,
+ .end = 0x01c667ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DM355_SPINT0_1,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* Not yet used, so not included:
+ * IORESOURCE_IRQ:
+ * - IRQ_DM355_SPINT0_0
+ * IORESOURCE_DMA:
+ * - DAVINCI_DMA_SPI_SPIX
+ * - DAVINCI_DMA_SPI_SPIR
+ */
+};
+
+static struct platform_device dm355_spi0_device = {
+ .name = "spi_davinci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dm355_spi0_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(dm355_spi0_resources),
+ .resource = dm355_spi0_resources,
+};
+
+void __init dm355_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len)
+{
+ /* for now, assume we need MISO */
+ davinci_cfg_reg(DM355_SPI0_SDI);
+
+ /* not all slaves will be wired up */
+ if (chipselect_mask & BIT(0))
+ davinci_cfg_reg(DM355_SPI0_SDENA0);
+ if (chipselect_mask & BIT(1))
+ davinci_cfg_reg(DM355_SPI0_SDENA1);
+
+ spi_register_board_info(info, len);
+
+ platform_device_register(&dm355_spi0_device);
+}
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+#define PINMUX2 0x08
+#define PINMUX3 0x0c
+#define PINMUX4 0x10
+#define INTMUX 0x18
+#define EVTMUX 0x1c
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm355_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false)
+
+MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false)
+MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false)
+MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false)
+
+MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false)
+MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false)
+
+MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false)
+
+MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false)
+MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false)
+MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false)
+
+INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false)
+INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false)
+INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false)
+
+EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false)
+EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false)
+EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false)
+#endif
+};
+
+static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM355_CCDC_VDINT0] = 2,
+ [IRQ_DM355_CCDC_VDINT1] = 6,
+ [IRQ_DM355_CCDC_VDINT2] = 6,
+ [IRQ_DM355_IPIPE_HST] = 6,
+ [IRQ_DM355_H3AINT] = 6,
+ [IRQ_DM355_IPIPE_SDR] = 6,
+ [IRQ_DM355_IPIPEIFINT] = 6,
+ [IRQ_DM355_OSDINT] = 7,
+ [IRQ_DM355_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_DM355_RTOINT] = 4,
+ [IRQ_DM355_UARTINT2] = 7,
+ [IRQ_DM355_TINT6] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_DM355_SPINT2_1] = 7,
+ [IRQ_DM355_TINT7] = 4,
+ [IRQ_DM355_SDIOINT0] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_DM355_MMCINT1] = 7,
+ [IRQ_DM355_PWMINT3] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM355_SDIOINT1] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_DM355_SPINT0_0] = 3,
+ [IRQ_DM355_SPINT0_1] = 3,
+ [IRQ_DM355_GPIO0] = 3,
+ [IRQ_DM355_GPIO1] = 7,
+ [IRQ_DM355_GPIO2] = 4,
+ [IRQ_DM355_GPIO3] = 4,
+ [IRQ_DM355_GPIO4] = 7,
+ [IRQ_DM355_GPIO5] = 7,
+ [IRQ_DM355_GPIO6] = 7,
+ [IRQ_DM355_GPIO7] = 7,
+ [IRQ_DM355_GPIO8] = 7,
+ [IRQ_DM355_GPIO9] = 7,
+ [IRQ_DM355_GPIOBNK0] = 7,
+ [IRQ_DM355_GPIOBNK1] = 7,
+ [IRQ_DM355_GPIOBNK2] = 7,
+ [IRQ_DM355_GPIOBNK3] = 7,
+ [IRQ_DM355_GPIOBNK4] = 7,
+ [IRQ_DM355_GPIOBNK5] = 7,
+ [IRQ_DM355_GPIOBNK6] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm355_no_event[] = {
+ 12, 13, 24, 56, 57,
+ 58, 59, 60, 61, 62,
+ 63,
+ -1
+};
+
+static struct edma_soc_info dm355_edma_info = {
+ .n_channel = 64,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 2,
+ .noevent = dma_chan_dm355_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using (or muxing) TC*_ERR */
+};
+
+static struct platform_device dm355_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm355_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm355_io_desc[] = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = SRAM_VIRT,
+ .pfn = __phys_to_pfn(0x00010000),
+ .length = SZ_32K,
+ /* MT_MEMORY_NONCACHED requires supersection alignment */
+ .type = MT_DEVICE,
+ },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm355_ids[] = {
+ {
+ .variant = 0x0,
+ .part_no = 0xb73b,
+ .manufacturer = 0x00f,
+ .cpu_id = DAVINCI_CPU_ID_DM355,
+ .name = "dm355",
+ },
+};
+
+static void __iomem *dm355_psc_bases[] = {
+ IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+struct davinci_timer_info dm355_timer_info = {
+ .timers = davinci_timer_instance,
+ .clockevent_id = T0_BOT,
+ .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm355_serial_platform_data[] = {
+ {
+ .mapbase = DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DM355_UART2_BASE,
+ .irq = IRQ_DM355_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device dm355_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm355_serial_platform_data,
+ },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm355 = {
+ .io_desc = dm355_io_desc,
+ .io_desc_num = ARRAY_SIZE(dm355_io_desc),
+ .jtag_id_base = IO_ADDRESS(0x01c40028),
+ .ids = dm355_ids,
+ .ids_num = ARRAY_SIZE(dm355_ids),
+ .cpu_clks = dm355_clks,
+ .psc_bases = dm355_psc_bases,
+ .psc_bases_num = ARRAY_SIZE(dm355_psc_bases),
+ .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+ .pinmux_pins = dm355_pins,
+ .pinmux_pins_num = ARRAY_SIZE(dm355_pins),
+ .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+ .intc_type = DAVINCI_INTC_TYPE_AINTC,
+ .intc_irq_prios = dm355_default_priorities,
+ .intc_irq_num = DAVINCI_N_AINTC_IRQ,
+ .timer_info = &dm355_timer_info,
+ .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE),
+ .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE),
+ .gpio_num = 104,
+ .gpio_irq = IRQ_DM355_GPIOBNK0,
+ .serial_dev = &dm355_serial_device,
+ .sram_dma = 0x00010000,
+ .sram_len = SZ_32K,
+};
+
+void __init dm355_init(void)
+{
+ davinci_common_init(&davinci_soc_info_dm355);
+}
+
+static int __init dm355_init_devices(void)
+{
+ if (!cpu_is_davinci_dm355())
+ return 0;
+
+ davinci_cfg_reg(DM355_INT_EDMA_CC);
+ platform_device_register(&dm355_edma_device);
+ return 0;
+}
+postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d428ef1..fb5449b3 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -11,7 +11,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
+#include <linux/serial_8250.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
#include <mach/dm644x.h>
#include <mach/clock.h>
@@ -20,6 +24,9 @@
#include <mach/irqs.h>
#include <mach/psc.h>
#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
#include "clock.h"
#include "mux.h"
@@ -312,7 +319,14 @@
CLK(NULL, NULL, NULL),
};
-#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+static struct emac_platform_data dm644x_emac_pdata = {
+ .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET,
+ .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET,
+ .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET,
+ .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET,
+ .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE,
+ .version = EMAC_VERSION_1,
+};
static struct resource dm644x_emac_resources[] = {
{
@@ -330,11 +344,15 @@
static struct platform_device dm644x_emac_device = {
.name = "davinci_emac",
.id = 1,
+ .dev = {
+ .platform_data = &dm644x_emac_pdata,
+ },
.num_resources = ARRAY_SIZE(dm644x_emac_resources),
.resource = dm644x_emac_resources,
};
-#endif
+#define PINMUX0 0x00
+#define PINMUX1 0x04
/*
* Device specific mux setup
@@ -343,6 +361,7 @@
* reg offset mask mode
*/
static const struct mux_config dm644x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
@@ -383,8 +402,76 @@
MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
+#endif
};
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_VDINT0] = 2,
+ [IRQ_VDINT1] = 6,
+ [IRQ_VDINT2] = 6,
+ [IRQ_HISTINT] = 6,
+ [IRQ_H3AINT] = 6,
+ [IRQ_PRVUINT] = 6,
+ [IRQ_RSZINT] = 6,
+ [7] = 7,
+ [IRQ_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_VLCDINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_EMACINT] = 4,
+ [14] = 7,
+ [15] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_PSCIN] = 7,
+ [21] = 7,
+ [IRQ_IDE] = 4,
+ [23] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_SDIOINT] = 7,
+ [28] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_VLQINT] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_UARTINT2] = 3,
+ [IRQ_SPINT0] = 3,
+ [IRQ_SPINT1] = 3,
+ [45] = 7,
+ [IRQ_DSP2ARM0] = 4,
+ [IRQ_DSP2ARM1] = 4,
+ [IRQ_GPIO0] = 7,
+ [IRQ_GPIO1] = 7,
+ [IRQ_GPIO2] = 7,
+ [IRQ_GPIO3] = 7,
+ [IRQ_GPIO4] = 7,
+ [IRQ_GPIO5] = 7,
+ [IRQ_GPIO6] = 7,
+ [IRQ_GPIO7] = 7,
+ [IRQ_GPIOBNK0] = 7,
+ [IRQ_GPIOBNK1] = 7,
+ [IRQ_GPIOBNK2] = 7,
+ [IRQ_GPIOBNK3] = 7,
+ [IRQ_GPIOBNK4] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
/*----------------------------------------------------------------------*/
@@ -444,10 +531,118 @@
};
/*----------------------------------------------------------------------*/
+
+static struct map_desc dm644x_io_desc[] = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = SRAM_VIRT,
+ .pfn = __phys_to_pfn(0x00008000),
+ .length = SZ_16K,
+ /* MT_MEMORY_NONCACHED requires supersection alignment */
+ .type = MT_DEVICE,
+ },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm644x_ids[] = {
+ {
+ .variant = 0x0,
+ .part_no = 0xb700,
+ .manufacturer = 0x017,
+ .cpu_id = DAVINCI_CPU_ID_DM6446,
+ .name = "dm6446",
+ },
+};
+
+static void __iomem *dm644x_psc_bases[] = {
+ IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+struct davinci_timer_info dm644x_timer_info = {
+ .timers = davinci_timer_instance,
+ .clockevent_id = T0_BOT,
+ .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+ {
+ .mapbase = DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device dm644x_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm644x_serial_platform_data,
+ },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm644x = {
+ .io_desc = dm644x_io_desc,
+ .io_desc_num = ARRAY_SIZE(dm644x_io_desc),
+ .jtag_id_base = IO_ADDRESS(0x01c40028),
+ .ids = dm644x_ids,
+ .ids_num = ARRAY_SIZE(dm644x_ids),
+ .cpu_clks = dm644x_clks,
+ .psc_bases = dm644x_psc_bases,
+ .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases),
+ .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+ .pinmux_pins = dm644x_pins,
+ .pinmux_pins_num = ARRAY_SIZE(dm644x_pins),
+ .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+ .intc_type = DAVINCI_INTC_TYPE_AINTC,
+ .intc_irq_prios = dm644x_default_priorities,
+ .intc_irq_num = DAVINCI_N_AINTC_IRQ,
+ .timer_info = &dm644x_timer_info,
+ .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE),
+ .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE),
+ .gpio_num = 71,
+ .gpio_irq = IRQ_GPIOBNK0,
+ .serial_dev = &dm644x_serial_device,
+ .emac_pdata = &dm644x_emac_pdata,
+ .sram_dma = 0x00008000,
+ .sram_len = SZ_16K,
+};
+
void __init dm644x_init(void)
{
- davinci_clk_init(dm644x_clks);
- davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+ davinci_common_init(&davinci_soc_info_dm644x);
}
static int __init dm644x_init_devices(void)
@@ -456,6 +651,7 @@
return 0;
platform_device_register(&dm644x_edma_device);
+ platform_device_register(&dm644x_emac_device);
return 0;
}
postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
new file mode 100644
index 0000000..334f071
--- /dev/null
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -0,0 +1,636 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm646x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM646X_REF_FREQ 27000000
+#define DM646X_AUX_FREQ 24000000
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ .rate = DM646X_REF_FREQ,
+};
+
+static struct clk aux_clkin = {
+ .name = "aux_clkin",
+ .rate = DM646X_AUX_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .pll_data = &pll1_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+ .name = "pll1_sysclk4",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+ .name = "pll1_sysclk5",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+ .name = "pll1_sysclk6",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV6,
+};
+
+static struct clk pll1_sysclk8 = {
+ .name = "pll1_sysclk8",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+ .name = "pll1_sysclk9",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV9,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2_clk",
+ .parent = &ref_clk,
+ .pll_data = &pll2_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk dsp_clk = {
+ .name = "dsp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DM646X_LPSC_C64X_CPU,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+ .name = "arm",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM646X_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &aux_clkin,
+ .lpsc = DM646X_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &aux_clkin,
+ .lpsc = DM646X_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &aux_clkin,
+ .lpsc = DM646X_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+ .name = "I2CCLK",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_I2C,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_AEMIF,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+ .name = "emac",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_EMAC,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_PWM0,
+ .usecount = 1, /* REVIST: disabling hangs system */
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_PWM1,
+ .usecount = 1, /* REVIST: disabling hangs system */
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_sysclk3,
+ .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
+};
+
+static struct clk vpif0_clk = {
+ .name = "vpif0",
+ .parent = &ref_clk,
+ .lpsc = DM646X_LPSC_VPSSMSTR,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk vpif1_clk = {
+ .name = "vpif1",
+ .parent = &ref_clk,
+ .lpsc = DM646X_LPSC_VPSSSLV,
+ .flags = ALWAYS_ENABLED,
+};
+
+struct davinci_clk dm646x_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "aux", &aux_clkin),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "dsp", &dsp_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, "vpif0", &vpif0_clk),
+ CLK(NULL, "vpif1", &vpif1_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+static struct emac_platform_data dm646x_emac_pdata = {
+ .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
+ .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET,
+ .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET,
+ .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET,
+ .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE,
+ .version = EMAC_VERSION_2,
+};
+
+static struct resource dm646x_emac_resources[] = {
+ {
+ .start = DM646X_EMAC_BASE,
+ .end = DM646X_EMAC_BASE + 0x47ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DM646X_EMACRXTHINT,
+ .end = IRQ_DM646X_EMACRXTHINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_EMACRXINT,
+ .end = IRQ_DM646X_EMACRXINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_EMACTXINT,
+ .end = IRQ_DM646X_EMACTXINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_EMACMISCINT,
+ .end = IRQ_DM646X_EMACMISCINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm646x_emac_device = {
+ .name = "davinci_emac",
+ .id = 1,
+ .dev = {
+ .platform_data = &dm646x_emac_pdata,
+ },
+ .num_resources = ARRAY_SIZE(dm646x_emac_resources),
+ .resource = dm646x_emac_resources,
+};
+
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm646x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM646X, ATAEN, 0, 0, 1, 1, true)
+
+MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false)
+
+MUX_CFG(DM646X, AUDCK0, 0, 28, 1, 0, false)
+
+MUX_CFG(DM646X, CRGMUX, 0, 24, 7, 5, true)
+
+MUX_CFG(DM646X, STSOMUX_DISABLE, 0, 22, 3, 0, true)
+
+MUX_CFG(DM646X, STSIMUX_DISABLE, 0, 20, 3, 0, true)
+
+MUX_CFG(DM646X, PTSOMUX_DISABLE, 0, 18, 3, 0, true)
+
+MUX_CFG(DM646X, PTSIMUX_DISABLE, 0, 16, 3, 0, true)
+
+MUX_CFG(DM646X, STSOMUX, 0, 22, 3, 2, true)
+
+MUX_CFG(DM646X, STSIMUX, 0, 20, 3, 2, true)
+
+MUX_CFG(DM646X, PTSOMUX_PARALLEL, 0, 18, 3, 2, true)
+
+MUX_CFG(DM646X, PTSIMUX_PARALLEL, 0, 16, 3, 2, true)
+
+MUX_CFG(DM646X, PTSOMUX_SERIAL, 0, 18, 3, 3, true)
+
+MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true)
+#endif
+};
+
+static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM646X_VP_VERTINT0] = 7,
+ [IRQ_DM646X_VP_VERTINT1] = 7,
+ [IRQ_DM646X_VP_VERTINT2] = 7,
+ [IRQ_DM646X_VP_VERTINT3] = 7,
+ [IRQ_DM646X_VP_ERRINT] = 7,
+ [IRQ_DM646X_RESERVED_1] = 7,
+ [IRQ_DM646X_RESERVED_2] = 7,
+ [IRQ_DM646X_WDINT] = 7,
+ [IRQ_DM646X_CRGENINT0] = 7,
+ [IRQ_DM646X_CRGENINT1] = 7,
+ [IRQ_DM646X_TSIFINT0] = 7,
+ [IRQ_DM646X_TSIFINT1] = 7,
+ [IRQ_DM646X_VDCEINT] = 7,
+ [IRQ_DM646X_USBINT] = 7,
+ [IRQ_DM646X_USBDMAINT] = 7,
+ [IRQ_DM646X_PCIINT] = 7,
+ [IRQ_CCINT0] = 7, /* dma */
+ [IRQ_CCERRINT] = 7, /* dma */
+ [IRQ_TCERRINT0] = 7, /* dma */
+ [IRQ_TCERRINT] = 7, /* dma */
+ [IRQ_DM646X_TCERRINT2] = 7,
+ [IRQ_DM646X_TCERRINT3] = 7,
+ [IRQ_DM646X_IDE] = 7,
+ [IRQ_DM646X_HPIINT] = 7,
+ [IRQ_DM646X_EMACRXTHINT] = 7,
+ [IRQ_DM646X_EMACRXINT] = 7,
+ [IRQ_DM646X_EMACTXINT] = 7,
+ [IRQ_DM646X_EMACMISCINT] = 7,
+ [IRQ_DM646X_MCASP0TXINT] = 7,
+ [IRQ_DM646X_MCASP0RXINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM646X_RESERVED_3] = 7,
+ [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
+ [IRQ_TINT0_TINT34] = 7, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_DM646X_VLQINT] = 7,
+ [IRQ_I2C] = 7,
+ [IRQ_UARTINT0] = 7,
+ [IRQ_UARTINT1] = 7,
+ [IRQ_DM646X_UARTINT2] = 7,
+ [IRQ_DM646X_SPINT0] = 7,
+ [IRQ_DM646X_SPINT1] = 7,
+ [IRQ_DM646X_DSP2ARMINT] = 7,
+ [IRQ_DM646X_RESERVED_4] = 7,
+ [IRQ_DM646X_PSCINT] = 7,
+ [IRQ_DM646X_GPIO0] = 7,
+ [IRQ_DM646X_GPIO1] = 7,
+ [IRQ_DM646X_GPIO2] = 7,
+ [IRQ_DM646X_GPIO3] = 7,
+ [IRQ_DM646X_GPIO4] = 7,
+ [IRQ_DM646X_GPIO5] = 7,
+ [IRQ_DM646X_GPIO6] = 7,
+ [IRQ_DM646X_GPIO7] = 7,
+ [IRQ_DM646X_GPIOBNK0] = 7,
+ [IRQ_DM646X_GPIOBNK1] = 7,
+ [IRQ_DM646X_GPIOBNK2] = 7,
+ [IRQ_DM646X_DDRINT] = 7,
+ [IRQ_DM646X_AEMIFINT] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm646x_no_event[] = {
+ 0, 1, 2, 3, 13,
+ 14, 15, 24, 25, 26,
+ 27, 30, 31, 54, 55,
+ 56,
+ -1
+};
+
+static struct edma_soc_info dm646x_edma_info = {
+ .n_channel = 64,
+ .n_region = 6, /* 0-1, 4-7 */
+ .n_slot = 512,
+ .n_tc = 4,
+ .noevent = dma_chan_dm646x_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc2",
+ .start = 0x01c10800,
+ .end = 0x01c10800 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc3",
+ .start = 0x01c10c00,
+ .end = 0x01c10c00 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using TC*_ERR */
+};
+
+static struct platform_device dm646x_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm646x_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm646x_io_desc[] = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = SRAM_VIRT,
+ .pfn = __phys_to_pfn(0x00010000),
+ .length = SZ_32K,
+ /* MT_MEMORY_NONCACHED requires supersection alignment */
+ .type = MT_DEVICE,
+ },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm646x_ids[] = {
+ {
+ .variant = 0x0,
+ .part_no = 0xb770,
+ .manufacturer = 0x017,
+ .cpu_id = DAVINCI_CPU_ID_DM6467,
+ .name = "dm6467",
+ },
+};
+
+static void __iomem *dm646x_psc_bases[] = {
+ IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+struct davinci_timer_info dm646x_timer_info = {
+ .timers = davinci_timer_instance,
+ .clockevent_id = T0_BOT,
+ .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+ {
+ .mapbase = DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_DM646X_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device dm646x_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm646x_serial_platform_data,
+ },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm646x = {
+ .io_desc = dm646x_io_desc,
+ .io_desc_num = ARRAY_SIZE(dm646x_io_desc),
+ .jtag_id_base = IO_ADDRESS(0x01c40028),
+ .ids = dm646x_ids,
+ .ids_num = ARRAY_SIZE(dm646x_ids),
+ .cpu_clks = dm646x_clks,
+ .psc_bases = dm646x_psc_bases,
+ .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases),
+ .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+ .pinmux_pins = dm646x_pins,
+ .pinmux_pins_num = ARRAY_SIZE(dm646x_pins),
+ .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+ .intc_type = DAVINCI_INTC_TYPE_AINTC,
+ .intc_irq_prios = dm646x_default_priorities,
+ .intc_irq_num = DAVINCI_N_AINTC_IRQ,
+ .timer_info = &dm646x_timer_info,
+ .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE),
+ .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE),
+ .gpio_num = 43, /* Only 33 usable */
+ .gpio_irq = IRQ_DM646X_GPIOBNK0,
+ .serial_dev = &dm646x_serial_device,
+ .emac_pdata = &dm646x_emac_pdata,
+ .sram_dma = 0x10010000,
+ .sram_len = SZ_32K,
+};
+
+void __init dm646x_init(void)
+{
+ davinci_common_init(&davinci_soc_info_dm646x);
+}
+
+static int __init dm646x_init_devices(void)
+{
+ if (!cpu_is_davinci_dm646x())
+ return 0;
+
+ platform_device_register(&dm646x_edma_device);
+ platform_device_register(&dm646x_emac_device);
+ return 0;
+}
+postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 1aba41c..1b65321 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -23,6 +23,7 @@
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include <mach/gpio.h>
#include <asm/mach/irq.h>
@@ -37,14 +38,13 @@
static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
-static unsigned __initdata ngpio;
-
/* create a non-inlined version */
static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
+static int __init davinci_gpio_irq_setup(void);
/*--------------------------------------------------------------------------*/
@@ -115,23 +115,16 @@
static int __init davinci_gpio_setup(void)
{
int i, base;
+ unsigned ngpio;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
- /* The gpio banks conceptually expose a segmented bitmap,
+ /*
+ * The gpio banks conceptually expose a segmented bitmap,
* and "ngpio" is one more than the largest zero-based
* bit index that's valid.
*/
- if (cpu_is_davinci_dm355()) { /* or dm335() */
- ngpio = 104;
- } else if (cpu_is_davinci_dm644x()) { /* or dm337() */
- ngpio = 71;
- } else if (cpu_is_davinci_dm646x()) {
- /* NOTE: each bank has several "reserved" bits,
- * unusable as GPIOs. Only 33 of the GPIO numbers
- * are usable, and we're not rejecting the others.
- */
- ngpio = 43;
- } else {
- /* if cpu_is_davinci_dm643x() ngpio = 111 */
+ ngpio = soc_info->gpio_num;
+ if (ngpio == 0) {
pr_err("GPIO setup: how many GPIOs?\n");
return -EINVAL;
}
@@ -157,6 +150,7 @@
gpiochip_add(&chips[i].chip);
}
+ davinci_gpio_irq_setup();
return 0;
}
pure_initcall(davinci_gpio_setup);
@@ -187,10 +181,15 @@
{
struct gpio_controller *__iomem g = get_irq_chip_data(irq);
u32 mask = __gpio_mask(irq_to_gpio(irq));
+ unsigned status = irq_desc[irq].status;
- if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING)
+ status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+ if (!status)
+ status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+
+ if (status & IRQ_TYPE_EDGE_FALLING)
__raw_writel(mask, &g->set_falling);
- if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING)
+ if (status & IRQ_TYPE_EDGE_RISING)
__raw_writel(mask, &g->set_rising);
}
@@ -205,10 +204,13 @@
irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
irq_desc[irq].status |= trigger;
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
- ? &g->set_falling : &g->clr_falling);
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
- ? &g->set_rising : &g->clr_rising);
+ /* don't enable the IRQ if it's currently disabled */
+ if (irq_desc[irq].depth == 0) {
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+ ? &g->set_falling : &g->clr_falling);
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+ ? &g->set_rising : &g->clr_rising);
+ }
return 0;
}
@@ -230,6 +232,7 @@
mask <<= 16;
/* temporarily mask (level sensitive) parent IRQ */
+ desc->chip->mask(irq);
desc->chip->ack(irq);
while (1) {
u32 status;
@@ -268,17 +271,15 @@
static int __init davinci_gpio_irq_setup(void)
{
unsigned gpio, irq, bank;
- unsigned bank_irq;
struct clk *clk;
u32 binten = 0;
+ unsigned ngpio, bank_irq;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
- if (cpu_is_davinci_dm355()) { /* or dm335() */
- bank_irq = IRQ_DM355_GPIOBNK0;
- } else if (cpu_is_davinci_dm644x()) {
- bank_irq = IRQ_GPIOBNK0;
- } else if (cpu_is_davinci_dm646x()) {
- bank_irq = IRQ_DM646X_GPIOBNK0;
- } else {
+ ngpio = soc_info->gpio_num;
+
+ bank_irq = soc_info->gpio_irq;
+ if (bank_irq == 0) {
printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
return -EINVAL;
}
@@ -318,11 +319,9 @@
/* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
- __raw_writel(binten, (void *__iomem)
- IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
+ __raw_writel(binten, soc_info->gpio_base + 0x08);
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
-arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
deleted file mode 100644
index 018b994..0000000
--- a/arch/arm/mach-davinci/id.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Davinci CPU identification code
- *
- * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * Derived from OMAP1 CPU identification code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define JTAG_ID_BASE IO_ADDRESS(0x01c40028)
-
-static unsigned int davinci_revision;
-
-struct davinci_id {
- u8 variant; /* JTAG ID bits 31:28 */
- u16 part_no; /* JTAG ID bits 27:12 */
- u32 manufacturer; /* JTAG ID bits 11:1 */
- u32 type; /* Cpu id bits [31:8], cpu class bits [7:0] */
-};
-
-/* Register values to detect the DaVinci version */
-static struct davinci_id davinci_ids[] __initdata = {
- {
- /* DM6446 */
- .part_no = 0xb700,
- .variant = 0x0,
- .manufacturer = 0x017,
- .type = 0x64460000,
- },
- {
- /* DM646X */
- .part_no = 0xb770,
- .variant = 0x0,
- .manufacturer = 0x017,
- .type = 0x64670000,
- },
- {
- /* DM355 */
- .part_no = 0xb73b,
- .variant = 0x0,
- .manufacturer = 0x00f,
- .type = 0x03550000,
- },
-};
-
-/*
- * Get Device Part No. from JTAG ID register
- */
-static u16 __init davinci_get_part_no(void)
-{
- u32 dev_id, part_no;
-
- dev_id = __raw_readl(JTAG_ID_BASE);
-
- part_no = ((dev_id >> 12) & 0xffff);
-
- return part_no;
-}
-
-/*
- * Get Device Revision from JTAG ID register
- */
-static u8 __init davinci_get_variant(void)
-{
- u32 variant;
-
- variant = __raw_readl(JTAG_ID_BASE);
-
- variant = (variant >> 28) & 0xf;
-
- return variant;
-}
-
-unsigned int davinci_rev(void)
-{
- return davinci_revision >> 16;
-}
-EXPORT_SYMBOL(davinci_rev);
-
-void __init davinci_check_revision(void)
-{
- int i;
- u16 part_no;
- u8 variant;
-
- part_no = davinci_get_part_no();
- variant = davinci_get_variant();
-
- /* First check only the major version in a safe way */
- for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
- if (part_no == (davinci_ids[i].part_no)) {
- davinci_revision = davinci_ids[i].type;
- break;
- }
- }
-
- /* Check if we can find the dev revision */
- for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
- if (part_no == davinci_ids[i].part_no &&
- variant == davinci_ids[i].variant) {
- davinci_revision = davinci_ids[i].type;
- break;
- }
- }
-
- printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
- davinci_rev(), variant);
-}
diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
deleted file mode 100644
index 3216f21..0000000
--- a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci DM6446 EVM board specific headers
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or ifndef.
- */
-
-#ifndef _MACH_DAVINCI_DM6446EVM_H
-#define _MACH_DAVINCI_DM6446EVM_H
-
-#include <linux/types.h>
-
-int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
-int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 1917709..a1f03b6 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -17,7 +17,8 @@
extern struct sys_timer davinci_timer;
extern void davinci_irq_init(void);
-extern void davinci_map_common_io(void);
+extern void __iomem *davinci_intc_base;
+extern int davinci_intc_type;
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
@@ -25,4 +26,56 @@
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+struct davinci_timer_instance {
+ void __iomem *base;
+ u32 bottom_irq;
+ u32 top_irq;
+ unsigned long cmp_off;
+ unsigned int cmp_irq;
+};
+
+struct davinci_timer_info {
+ struct davinci_timer_instance *timers;
+ unsigned int clockevent_id;
+ unsigned int clocksource_id;
+};
+
+/* SoC specific init support */
+struct davinci_soc_info {
+ struct map_desc *io_desc;
+ unsigned long io_desc_num;
+ u32 cpu_id;
+ u32 jtag_id;
+ void __iomem *jtag_id_base;
+ struct davinci_id *ids;
+ unsigned long ids_num;
+ struct davinci_clk *cpu_clks;
+ void __iomem **psc_bases;
+ unsigned long psc_bases_num;
+ void __iomem *pinmux_base;
+ const struct mux_config *pinmux_pins;
+ unsigned long pinmux_pins_num;
+ void __iomem *intc_base;
+ int intc_type;
+ u8 *intc_irq_prios;
+ unsigned long intc_irq_num;
+ struct davinci_timer_info *timer_info;
+ void __iomem *wdt_base;
+ void __iomem *gpio_base;
+ unsigned gpio_num;
+ unsigned gpio_irq;
+ struct platform_device *serial_dev;
+ struct emac_platform_data *emac_pdata;
+ dma_addr_t sram_dma;
+ unsigned sram_len;
+};
+
+extern struct davinci_soc_info davinci_soc_info;
+
+extern void davinci_common_init(struct davinci_soc_info *soc_info);
+
+/* standard place to map on-chip SRAMs; they *may* support DMA */
+#define SRAM_VIRT 0xfffe0000
+#define SRAM_SIZE SZ_128K
+
#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h
new file mode 100644
index 0000000..c4d27ee
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cp_intc.h
@@ -0,0 +1,57 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) definitions
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __ASM_HARDWARE_CP_INTC_H
+#define __ASM_HARDWARE_CP_INTC_H
+
+#define CP_INTC_REV 0x00
+#define CP_INTC_CTRL 0x04
+#define CP_INTC_HOST_CTRL 0x0C
+#define CP_INTC_GLOBAL_ENABLE 0x10
+#define CP_INTC_GLOBAL_NESTING_LEVEL 0x1C
+#define CP_INTC_SYS_STAT_IDX_SET 0x20
+#define CP_INTC_SYS_STAT_IDX_CLR 0x24
+#define CP_INTC_SYS_ENABLE_IDX_SET 0x28
+#define CP_INTC_SYS_ENABLE_IDX_CLR 0x2C
+#define CP_INTC_GLOBAL_WAKEUP_ENABLE 0x30
+#define CP_INTC_HOST_ENABLE_IDX_SET 0x34
+#define CP_INTC_HOST_ENABLE_IDX_CLR 0x38
+#define CP_INTC_PACING_PRESCALE 0x40
+#define CP_INTC_VECTOR_BASE 0x50
+#define CP_INTC_VECTOR_SIZE 0x54
+#define CP_INTC_VECTOR_NULL 0x58
+#define CP_INTC_PRIO_IDX 0x80
+#define CP_INTC_PRIO_VECTOR 0x84
+#define CP_INTC_SECURE_ENABLE 0x90
+#define CP_INTC_SECURE_PRIO_IDX 0x94
+#define CP_INTC_PACING_PARAM(n) (0x0100 + (n << 4))
+#define CP_INTC_PACING_DEC(n) (0x0104 + (n << 4))
+#define CP_INTC_PACING_MAP(n) (0x0108 + (n << 4))
+#define CP_INTC_SYS_RAW_STAT(n) (0x0200 + (n << 2))
+#define CP_INTC_SYS_STAT_CLR(n) (0x0280 + (n << 2))
+#define CP_INTC_SYS_ENABLE_SET(n) (0x0300 + (n << 2))
+#define CP_INTC_SYS_ENABLE_CLR(n) (0x0380 + (n << 2))
+#define CP_INTC_CHAN_MAP(n) (0x0400 + (n << 2))
+#define CP_INTC_HOST_MAP(n) (0x0800 + (n << 2))
+#define CP_INTC_HOST_PRIO_IDX(n) (0x0900 + (n << 2))
+#define CP_INTC_SYS_POLARITY(n) (0x0D00 + (n << 2))
+#define CP_INTC_SYS_TYPE(n) (0x0D80 + (n << 2))
+#define CP_INTC_WAKEUP_ENABLE(n) (0x0E00 + (n << 2))
+#define CP_INTC_DEBUG_SELECT(n) (0x0F00 + (n << 2))
+#define CP_INTC_SYS_SECURE_ENABLE(n) (0x1000 + (n << 2))
+#define CP_INTC_HOST_NESTING_LEVEL(n) (0x1100 + (n << 2))
+#define CP_INTC_HOST_ENABLE(n) (0x1500 + (n << 2))
+#define CP_INTC_HOST_PRIO_VECTOR(n) (0x1600 + (n << 2))
+#define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2))
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+ u8 *irq_prio);
+
+#endif /* __ASM_HARDWARE_CP_INTC_H */
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 27cfb1b..d12a5ed 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -16,17 +16,30 @@
#ifndef _ASM_ARCH_CPU_H
#define _ASM_ARCH_CPU_H
-extern unsigned int davinci_rev(void);
+#include <mach/common.h>
-#define IS_DAVINCI_CPU(type, id) \
-static inline int is_davinci_dm ##type(void) \
-{ \
- return (davinci_rev() == (id)) ? 1 : 0; \
+struct davinci_id {
+ u8 variant; /* JTAG ID bits 31:28 */
+ u16 part_no; /* JTAG ID bits 27:12 */
+ u16 manufacturer; /* JTAG ID bits 11:1 */
+ u32 cpu_id;
+ char *name;
+};
+
+/* Can use lower 16 bits of cpu id for a variant when required */
+#define DAVINCI_CPU_ID_DM6446 0x64460000
+#define DAVINCI_CPU_ID_DM6467 0x64670000
+#define DAVINCI_CPU_ID_DM355 0x03550000
+
+#define IS_DAVINCI_CPU(type, id) \
+static inline int is_davinci_ ##type(void) \
+{ \
+ return (davinci_soc_info.cpu_id == (id)); \
}
-IS_DAVINCI_CPU(644x, 0x6446)
-IS_DAVINCI_CPU(646x, 0x6467)
-IS_DAVINCI_CPU(355, 0x355)
+IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
+IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
+IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
#ifdef CONFIG_ARCH_DAVINCI_DM644x
#define cpu_is_davinci_dm644x() is_davinci_dm644x()
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index e6c0f0d..de3fc21 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -9,6 +9,16 @@
* or implied.
*/
+/* Modifications
+ * Jan 2009 Chaithrika U S Added senduart, busyuart, waituart
+ * macros, based on debug-8250.S file
+ * but using 32-bit accesses required for
+ * some davinci devices.
+ */
+
+#include <linux/serial_reg.h>
+#define UART_SHIFT 2
+
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
@@ -17,5 +27,22 @@
orr \rx, \rx, #0x00c20000 @ UART 0
.endm
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ .macro waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001: ldr \rd, [\rx, #UART_MSR << UART_SHIFT]
+ tst \rd, #UART_MSR_CTS
+ beq 1001b
+#endif
+ .endm
+
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
new file mode 100644
index 0000000..54903b7
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -0,0 +1,22 @@
+/*
+ * Chip specific defines for DM355 SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM355_H
+#define __ASM_ARCH_DM355_H
+
+#include <mach/hardware.h>
+
+struct spi_board_info;
+
+void __init dm355_init(void);
+void dm355_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len);
+
+#endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 3dcb9f4..15d42b9 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
+#include <mach/emac.h>
#define DM644X_EMAC_BASE (0x01C80000)
#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
new file mode 100644
index 0000000..1fc764c
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -0,0 +1,26 @@
+/*
+ * Chip specific defines for DM646x SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM646X_H
+#define __ASM_ARCH_DM646X_H
+
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM646X_EMAC_BASE (0x01C80000)
+#define DM646X_EMAC_CNTRL_OFFSET (0x0000)
+#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000)
+#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000)
+#define DM646X_EMAC_MDIO_OFFSET (0x4000)
+#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000)
+
+void __init dm646x_init(void);
+
+#endif /* __ASM_ARCH_DM646X_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index f6fc539..24a3792 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -208,10 +208,6 @@
void edma_pause(unsigned channel);
void edma_resume(unsigned channel);
-/* UNRELATED TO DMA */
-int davinci_alloc_iram(unsigned size);
-void davinci_free_iram(unsigned addr, unsigned size);
-
/* platform_data for EDMA driver */
struct edma_soc_info {
diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h
new file mode 100644
index 0000000..beff4fb
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/emac.h
@@ -0,0 +1,36 @@
+/*
+ * TI DaVinci EMAC platform support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _MACH_DAVINCI_EMAC_H
+#define _MACH_DAVINCI_EMAC_H
+
+#include <linux/if_ether.h>
+#include <linux/memory.h>
+
+struct emac_platform_data {
+ char mac_addr[ETH_ALEN];
+ u32 ctrl_reg_offset;
+ u32 ctrl_mod_reg_offset;
+ u32 ctrl_ram_offset;
+ u32 mdio_reg_offset;
+ u32 ctrl_ram_size;
+ u32 phy_mask;
+ u32 mdio_max_freq;
+ u8 rmii_en;
+ u8 version;
+};
+
+enum {
+ EMAC_VERSION_1, /* DM644x */
+ EMAC_VERSION_2, /* DM646x */
+};
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index 039b84f..fbdebc7 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -15,17 +15,36 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+ ldr \base, =davinci_intc_base
+ ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
+ ldr \tmp, =davinci_intc_type
+ ldr \tmp, [\tmp]
+ cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC
+ beq 1001f
+#endif
+#if defined(CONFIG_AINTC)
ldr \tmp, [\base, #0x14]
- mov \tmp, \tmp, lsr #2
+ movs \tmp, \tmp, lsr #2
sub \irqnr, \tmp, #1
- cmp \tmp, #0
+ b 1002f
+#endif
+#if defined(CONFIG_CP_INTC)
+1001: ldr \irqnr, [\base, #0x80] /* get irq number */
+ and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */
+ mov \tmp, \irqnr, lsr #3
+ and \tmp, \tmp, #0xfc
+ add \tmp, \tmp, #0x280 /* get the register offset */
+ ldr \irqstat, [\base, \tmp] /* get the intc status */
+ cmp \irqstat, #0x0
+#endif
+1002:
.endm
.macro irq_prio_table
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index efe3281..ae07455 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -17,6 +17,7 @@
#include <asm-generic/gpio.h>
#include <mach/irqs.h>
+#include <mach/common.h>
#define DAVINCI_GPIO_BASE 0x01C67000
@@ -67,15 +68,16 @@
__gpio_to_controller(unsigned gpio)
{
void *__iomem ptr;
+ void __iomem *base = davinci_soc_info.gpio_base;
if (gpio < 32 * 1)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+ ptr = base + 0x10;
else if (gpio < 32 * 2)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+ ptr = base + 0x38;
else if (gpio < 32 * 3)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ ptr = base + 0x60;
else if (gpio < 32 * 4)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
+ ptr = base + 0x88;
else
ptr = NULL;
return ptr;
@@ -142,13 +144,13 @@
{
if (gpio >= DAVINCI_N_GPIO)
return -EINVAL;
- return DAVINCI_N_AINTC_IRQ + gpio;
+ return davinci_soc_info.intc_irq_num + gpio;
}
static inline int irq_to_gpio(unsigned irq)
{
/* caller guarantees gpio_to_irq() succeeded */
- return irq - DAVINCI_N_AINTC_IRQ;
+ return irq - davinci_soc_info.intc_irq_num;
}
#endif /* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 1806607..bc5d6aa 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -30,6 +30,9 @@
/* Base address */
#define DAVINCI_ARM_INTC_BASE 0x01C48000
+#define DAVINCI_INTC_TYPE_AINTC 0
+#define DAVINCI_INTC_TYPE_CP_INTC 1
+
/* Interrupt lines */
#define IRQ_VDINT0 0
#define IRQ_VDINT1 1
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 86c25c7..c712c7c 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -21,7 +21,6 @@
* Definitions
**************************************************************************/
#define DAVINCI_DDR_BASE 0x80000000
-#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */
#define PHYS_OFFSET DAVINCI_DDR_BASE
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
new file mode 100644
index 0000000..5a85e24
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -0,0 +1,33 @@
+/*
+ * Board-specific MMC configuration
+ */
+
+#ifndef _DAVINCI_MMC_H
+#define _DAVINCI_MMC_H
+
+#include <linux/types.h>
+#include <linux/mmc/host.h>
+
+struct davinci_mmc_config {
+ /* get_cd()/get_wp() may sleep */
+ int (*get_cd)(int module);
+ int (*get_ro)(int module);
+ /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
+ u8 wires;
+
+ u32 max_freq;
+
+ /* any additional host capabilities: OR'd in to mmc->f_caps */
+ u32 caps;
+
+ /* Version of the MMC/SD controller */
+ u8 version;
+};
+void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
+
+enum {
+ MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */
+ MMC_CTLR_VERSION_2, /* DA830 */
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index bae22cb..2737845 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -19,16 +19,6 @@
#ifndef __INC_MACH_MUX_H
#define __INC_MACH_MUX_H
-/* System module registers */
-#define PINMUX0 0x00
-#define PINMUX1 0x04
-/* dm355 only */
-#define PINMUX2 0x08
-#define PINMUX3 0x0c
-#define PINMUX4 0x10
-#define INTMUX 0x18
-#define EVTMUX 0x1c
-
struct mux_config {
const char *name;
const char *mux_reg_name;
@@ -168,15 +158,9 @@
#ifdef CONFIG_DAVINCI_MUX
/* setup pin muxing */
-extern void davinci_mux_init(void);
-extern int davinci_mux_register(const struct mux_config *pins,
- unsigned long size);
extern int davinci_cfg_reg(unsigned long reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline void davinci_mux_init(void) {}
-static inline int davinci_mux_register(const struct mux_config *pins,
- unsigned long size) { return 0; }
static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
#endif
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 55a90d4..ab8a258 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -27,6 +27,8 @@
#ifndef __ASM_ARCH_PSC_H
#define __ASM_ARCH_PSC_H
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
+
/* Power and Sleep Controller (PSC) Domains */
#define DAVINCI_GPSC_ARMDOMAIN 0
#define DAVINCI_GPSC_DSPDOMAIN 1
@@ -116,8 +118,8 @@
#define DM646X_LPSC_TIMER1 35
#define DM646X_LPSC_ARM_INTC 45
-extern int davinci_psc_is_clk_active(unsigned int id);
-extern void davinci_psc_config(unsigned int domain, unsigned int id,
- char enable);
+extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+ unsigned int id, char enable);
#endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 632847d..794fa5c 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -18,8 +18,6 @@
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
-#define DM355_UART2_BASE (IO_PHYS + 0x206000)
-
/* DaVinci UART register offsets */
#define UART_DAVINCI_PWREMU 0x0c
#define UART_DM646X_SCR 0x10
@@ -30,6 +28,6 @@
unsigned int enabled_uarts;
};
-extern void davinci_serial_init(struct davinci_uart_config *);
+extern int davinci_serial_init(struct davinci_uart_config *);
#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h
new file mode 100644
index 0000000..111f7cc
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/sram.h
@@ -0,0 +1,27 @@
+/*
+ * mach/sram.h - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_SRAM_H
+#define __MACH_SRAM_H
+
+/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY 512
+
+/*
+ * SRAM allocations return a CPU virtual address, or NULL on error.
+ * If a DMA address is requested and the SRAM supports DMA, its
+ * mapped address is also returned.
+ *
+ * Errors include SRAM memory not being available, and requesting
+ * DMA mapped SRAM on systems which don't allow that.
+ */
+extern void *sram_alloc(size_t len, dma_addr_t *dma);
+extern void sram_free(void *addr, size_t len);
+
+#endif /* __MACH_SRAM_H */
diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h
new file mode 100644
index 0000000..1c971d8
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/time.h
@@ -0,0 +1,35 @@
+/*
+ * Local header file for DaVinci time code.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
+#define __ARCH_ARM_MACH_DAVINCI_TIME_H
+
+#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
+#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00)
+
+enum {
+ T0_BOT,
+ T0_TOP,
+ T1_BOT,
+ T1_TOP,
+ NUM_TIMERS
+};
+
+#define IS_TIMER1(id) (id & 0x2)
+#define IS_TIMER0(id) (!IS_TIMER1(id))
+#define IS_TIMER_TOP(id) ((id & 0x1))
+#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
+
+#define ID_TO_TIMER(id) (IS_TIMER1(id) != 0)
+
+extern struct davinci_timer_instance davinci_timer_instance[];
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 8c165de..1e27475 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -13,11 +13,24 @@
#include <linux/serial_reg.h>
#include <mach/serial.h>
+#include <asm/mach-types.h>
+
+extern unsigned int __machine_arch_type;
+
+static u32 *uart;
+
+static u32 *get_uart_base(void)
+{
+ /* Add logic here for new platforms, using __macine_arch_type */
+ return (u32 *)DAVINCI_UART0_BASE;
+}
+
/* PORT_16C550A, in polled non-fifo mode */
static void putc(char c)
{
- volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+ if (!uart)
+ uart = get_uart_base();
while (!(uart[UART_LSR] & UART_LSR_THRE))
barrier();
@@ -26,7 +39,9 @@
static inline void flush(void)
{
- volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+ if (!uart)
+ uart = get_uart_base();
+
while (!(uart[UART_LSR] & UART_LSR_THRE))
barrier();
}
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index a548abb..49912b4 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -9,47 +9,9 @@
*/
#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <asm/tlb.h>
-#include <asm/memory.h>
-
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-
-extern void davinci_check_revision(void);
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc davinci_io_desc[] __initdata = {
- {
- .virtual = IO_VIRT,
- .pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
- .type = MT_DEVICE
- },
-};
-
-void __init davinci_map_common_io(void)
-{
- iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
-
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
-
- /* We want to check CPU revision early for cpu_is_xxxx() macros.
- * IO space mapping must be initialized before we can do that.
- */
- davinci_check_revision();
-}
#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst)))
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 5a324c9..af92ffe 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -26,6 +26,7 @@
#include <mach/hardware.h>
#include <mach/cputype.h>
+#include <mach/common.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
@@ -41,18 +42,14 @@
#define IRQ_INTPRI0_REG_OFFSET 0x0030
#define IRQ_INTPRI7_REG_OFFSET 0x004C
-const u8 *davinci_def_priorities;
-
-#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-
static inline unsigned int davinci_irq_readl(int offset)
{
- return __raw_readl(INTC_BASE + offset);
+ return __raw_readl(davinci_intc_base + offset);
}
static inline void davinci_irq_writel(unsigned long value, int offset)
{
- __raw_writel(value, INTC_BASE + offset);
+ __raw_writel(value, davinci_intc_base + offset);
}
/* Disable interrupt */
@@ -113,217 +110,11 @@
.unmask = davinci_unmask_irq,
};
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
- [IRQ_VDINT0] = 2,
- [IRQ_VDINT1] = 6,
- [IRQ_VDINT2] = 6,
- [IRQ_HISTINT] = 6,
- [IRQ_H3AINT] = 6,
- [IRQ_PRVUINT] = 6,
- [IRQ_RSZINT] = 6,
- [7] = 7,
- [IRQ_VENCINT] = 6,
- [IRQ_ASQINT] = 6,
- [IRQ_IMXINT] = 6,
- [IRQ_VLCDINT] = 6,
- [IRQ_USBINT] = 4,
- [IRQ_EMACINT] = 4,
- [14] = 7,
- [15] = 7,
- [IRQ_CCINT0] = 5, /* dma */
- [IRQ_CCERRINT] = 5, /* dma */
- [IRQ_TCERRINT0] = 5, /* dma */
- [IRQ_TCERRINT] = 5, /* dma */
- [IRQ_PSCIN] = 7,
- [21] = 7,
- [IRQ_IDE] = 4,
- [23] = 7,
- [IRQ_MBXINT] = 7,
- [IRQ_MBRINT] = 7,
- [IRQ_MMCINT] = 7,
- [IRQ_SDIOINT] = 7,
- [28] = 7,
- [IRQ_DDRINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_VLQINT] = 4,
- [IRQ_TINT0_TINT12] = 2, /* clockevent */
- [IRQ_TINT0_TINT34] = 2, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_PWMINT2] = 7,
- [IRQ_I2C] = 3,
- [IRQ_UARTINT0] = 3,
- [IRQ_UARTINT1] = 3,
- [IRQ_UARTINT2] = 3,
- [IRQ_SPINT0] = 3,
- [IRQ_SPINT1] = 3,
- [45] = 7,
- [IRQ_DSP2ARM0] = 4,
- [IRQ_DSP2ARM1] = 4,
- [IRQ_GPIO0] = 7,
- [IRQ_GPIO1] = 7,
- [IRQ_GPIO2] = 7,
- [IRQ_GPIO3] = 7,
- [IRQ_GPIO4] = 7,
- [IRQ_GPIO5] = 7,
- [IRQ_GPIO6] = 7,
- [IRQ_GPIO7] = 7,
- [IRQ_GPIOBNK0] = 7,
- [IRQ_GPIOBNK1] = 7,
- [IRQ_GPIOBNK2] = 7,
- [IRQ_GPIOBNK3] = 7,
- [IRQ_GPIOBNK4] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
-static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
- [IRQ_DM646X_VP_VERTINT0] = 7,
- [IRQ_DM646X_VP_VERTINT1] = 7,
- [IRQ_DM646X_VP_VERTINT2] = 7,
- [IRQ_DM646X_VP_VERTINT3] = 7,
- [IRQ_DM646X_VP_ERRINT] = 7,
- [IRQ_DM646X_RESERVED_1] = 7,
- [IRQ_DM646X_RESERVED_2] = 7,
- [IRQ_DM646X_WDINT] = 7,
- [IRQ_DM646X_CRGENINT0] = 7,
- [IRQ_DM646X_CRGENINT1] = 7,
- [IRQ_DM646X_TSIFINT0] = 7,
- [IRQ_DM646X_TSIFINT1] = 7,
- [IRQ_DM646X_VDCEINT] = 7,
- [IRQ_DM646X_USBINT] = 7,
- [IRQ_DM646X_USBDMAINT] = 7,
- [IRQ_DM646X_PCIINT] = 7,
- [IRQ_CCINT0] = 7, /* dma */
- [IRQ_CCERRINT] = 7, /* dma */
- [IRQ_TCERRINT0] = 7, /* dma */
- [IRQ_TCERRINT] = 7, /* dma */
- [IRQ_DM646X_TCERRINT2] = 7,
- [IRQ_DM646X_TCERRINT3] = 7,
- [IRQ_DM646X_IDE] = 7,
- [IRQ_DM646X_HPIINT] = 7,
- [IRQ_DM646X_EMACRXTHINT] = 7,
- [IRQ_DM646X_EMACRXINT] = 7,
- [IRQ_DM646X_EMACTXINT] = 7,
- [IRQ_DM646X_EMACMISCINT] = 7,
- [IRQ_DM646X_MCASP0TXINT] = 7,
- [IRQ_DM646X_MCASP0RXINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_DM646X_RESERVED_3] = 7,
- [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
- [IRQ_TINT0_TINT34] = 7, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_DM646X_VLQINT] = 7,
- [IRQ_I2C] = 7,
- [IRQ_UARTINT0] = 7,
- [IRQ_UARTINT1] = 7,
- [IRQ_DM646X_UARTINT2] = 7,
- [IRQ_DM646X_SPINT0] = 7,
- [IRQ_DM646X_SPINT1] = 7,
- [IRQ_DM646X_DSP2ARMINT] = 7,
- [IRQ_DM646X_RESERVED_4] = 7,
- [IRQ_DM646X_PSCINT] = 7,
- [IRQ_DM646X_GPIO0] = 7,
- [IRQ_DM646X_GPIO1] = 7,
- [IRQ_DM646X_GPIO2] = 7,
- [IRQ_DM646X_GPIO3] = 7,
- [IRQ_DM646X_GPIO4] = 7,
- [IRQ_DM646X_GPIO5] = 7,
- [IRQ_DM646X_GPIO6] = 7,
- [IRQ_DM646X_GPIO7] = 7,
- [IRQ_DM646X_GPIOBNK0] = 7,
- [IRQ_DM646X_GPIOBNK1] = 7,
- [IRQ_DM646X_GPIOBNK2] = 7,
- [IRQ_DM646X_DDRINT] = 7,
- [IRQ_DM646X_AEMIFINT] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
-static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
- [IRQ_DM355_CCDC_VDINT0] = 2,
- [IRQ_DM355_CCDC_VDINT1] = 6,
- [IRQ_DM355_CCDC_VDINT2] = 6,
- [IRQ_DM355_IPIPE_HST] = 6,
- [IRQ_DM355_H3AINT] = 6,
- [IRQ_DM355_IPIPE_SDR] = 6,
- [IRQ_DM355_IPIPEIFINT] = 6,
- [IRQ_DM355_OSDINT] = 7,
- [IRQ_DM355_VENCINT] = 6,
- [IRQ_ASQINT] = 6,
- [IRQ_IMXINT] = 6,
- [IRQ_USBINT] = 4,
- [IRQ_DM355_RTOINT] = 4,
- [IRQ_DM355_UARTINT2] = 7,
- [IRQ_DM355_TINT6] = 7,
- [IRQ_CCINT0] = 5, /* dma */
- [IRQ_CCERRINT] = 5, /* dma */
- [IRQ_TCERRINT0] = 5, /* dma */
- [IRQ_TCERRINT] = 5, /* dma */
- [IRQ_DM355_SPINT2_1] = 7,
- [IRQ_DM355_TINT7] = 4,
- [IRQ_DM355_SDIOINT0] = 7,
- [IRQ_MBXINT] = 7,
- [IRQ_MBRINT] = 7,
- [IRQ_MMCINT] = 7,
- [IRQ_DM355_MMCINT1] = 7,
- [IRQ_DM355_PWMINT3] = 7,
- [IRQ_DDRINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_DM355_SDIOINT1] = 4,
- [IRQ_TINT0_TINT12] = 2, /* clockevent */
- [IRQ_TINT0_TINT34] = 2, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_PWMINT2] = 7,
- [IRQ_I2C] = 3,
- [IRQ_UARTINT0] = 3,
- [IRQ_UARTINT1] = 3,
- [IRQ_DM355_SPINT0_0] = 3,
- [IRQ_DM355_SPINT0_1] = 3,
- [IRQ_DM355_GPIO0] = 3,
- [IRQ_DM355_GPIO1] = 7,
- [IRQ_DM355_GPIO2] = 4,
- [IRQ_DM355_GPIO3] = 4,
- [IRQ_DM355_GPIO4] = 7,
- [IRQ_DM355_GPIO5] = 7,
- [IRQ_DM355_GPIO6] = 7,
- [IRQ_DM355_GPIO7] = 7,
- [IRQ_DM355_GPIO8] = 7,
- [IRQ_DM355_GPIO9] = 7,
- [IRQ_DM355_GPIOBNK0] = 7,
- [IRQ_DM355_GPIOBNK1] = 7,
- [IRQ_DM355_GPIOBNK2] = 7,
- [IRQ_DM355_GPIOBNK3] = 7,
- [IRQ_DM355_GPIOBNK4] = 7,
- [IRQ_DM355_GPIOBNK5] = 7,
- [IRQ_DM355_GPIOBNK6] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
unsigned i;
-
- if (cpu_is_davinci_dm644x())
- davinci_def_priorities = dm644x_default_priorities;
- else if (cpu_is_davinci_dm646x())
- davinci_def_priorities = dm646x_default_priorities;
- else if (cpu_is_davinci_dm355())
- davinci_def_priorities = dm355_default_priorities;
+ const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index bbba0b2..d310f57 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -21,18 +21,7 @@
#include <mach/hardware.h>
#include <mach/mux.h>
-
-static const struct mux_config *mux_table;
-static unsigned long pin_table_sz;
-
-int __init davinci_mux_register(const struct mux_config *pins,
- unsigned long size)
-{
- mux_table = pins;
- pin_table_sz = size;
-
- return 0;
-}
+#include <mach/common.h>
/*
* Sets the DAVINCI MUX register based on the table
@@ -40,23 +29,24 @@
int __init_or_module davinci_cfg_reg(const unsigned long index)
{
static DEFINE_SPINLOCK(mux_spin_lock);
- void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ void __iomem *base = soc_info->pinmux_base;
unsigned long flags;
const struct mux_config *cfg;
unsigned int reg_orig = 0, reg = 0;
unsigned int mask, warn = 0;
- if (!mux_table)
+ if (!soc_info->pinmux_pins)
BUG();
- if (index >= pin_table_sz) {
+ if (index >= soc_info->pinmux_pins_num) {
printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
- index, pin_table_sz);
+ index, soc_info->pinmux_pins_num);
dump_stack();
return -ENODEV;
}
- cfg = &mux_table[index];
+ cfg = &soc_info->pinmux_pins[index];
if (cfg->name == NULL) {
printk(KERN_ERR "No entry for the specified index\n");
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 84171ab..a78b657 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -28,8 +28,6 @@
#include <mach/psc.h>
#include <mach/mux.h>
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
-
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
@@ -42,22 +40,42 @@
#define MDSTAT_STATE_MASK 0x1f
/* Return nonzero iff the domain's clock is active */
-int __init davinci_psc_is_clk_active(unsigned int id)
+int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
{
- void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
- u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+ void __iomem *psc_base;
+ u32 mdstat;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+ pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+ (int)soc_info->psc_bases, ctlr);
+ return 0;
+ }
+
+ psc_base = soc_info->psc_bases[ctlr];
+ mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
/* if clocked, state can be "Enable" or "SyncReset" */
return mdstat & BIT(12);
}
/* Enable or disable a PSC domain */
-void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
+void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+ unsigned int id, char enable)
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
- void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ void __iomem *psc_base;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
+ if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+ pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+ (int)soc_info->psc_bases, ctlr);
+ return;
+ }
+
+ psc_base = soc_info->psc_bases[ctlr];
+
mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
mdctl &= ~MDSTAT_STATE_MASK;
mdctl |= next_state;
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 6950757..c530c73 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -33,6 +33,8 @@
#include <mach/serial.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
+#include <mach/common.h>
+
#include "clock.h"
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
@@ -49,44 +51,6 @@
__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .mapbase = DAVINCI_UART0_BASE,
- .irq = IRQ_UARTINT0,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .mapbase = DAVINCI_UART1_BASE,
- .irq = IRQ_UARTINT1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .mapbase = DAVINCI_UART2_BASE,
- .irq = IRQ_UARTINT2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0
- },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
unsigned int pwremu = 0;
@@ -106,35 +70,22 @@
UART_DM646X_SCR_TX_WATERMARK);
}
-void __init davinci_serial_init(struct davinci_uart_config *info)
+int __init davinci_serial_init(struct davinci_uart_config *info)
{
int i;
char name[16];
struct clk *uart_clk;
- struct device *dev = &serial_device.dev;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct device *dev = &soc_info->serial_dev->dev;
+ struct plat_serial8250_port *p = dev->platform_data;
/*
* Make sure the serial ports are muxed on at this point.
- * You have to mux them off in device drivers later on
- * if not needed.
+ * You have to mux them off in device drivers later on if not needed.
*/
- for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
- struct plat_serial8250_port *p = serial_platform_data + i;
-
- if (!(info->enabled_uarts & (1 << i))) {
- p->flags = 0;
+ for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+ if (!(info->enabled_uarts & (1 << i)))
continue;
- }
-
- if (cpu_is_davinci_dm646x())
- p->iotype = UPIO_MEM32;
-
- if (cpu_is_davinci_dm355()) {
- if (i == 2) {
- p->mapbase = (unsigned long)DM355_UART2_BASE;
- p->irq = IRQ_DM355_UARTINT2;
- }
- }
sprintf(name, "uart%d", i);
uart_clk = clk_get(dev, name);
@@ -147,11 +98,6 @@
davinci_serial_reset(p);
}
}
-}
-static int __init davinci_init(void)
-{
- return platform_device_register(&serial_device);
+ return platform_device_register(soc_info->serial_dev);
}
-
-arch_initcall(davinci_init);
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
new file mode 100644
index 0000000..db54b2a
--- /dev/null
+++ b/arch/arm/mach-davinci/sram.c
@@ -0,0 +1,74 @@
+/*
+ * mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/genalloc.h>
+
+#include <mach/common.h>
+#include <mach/memory.h>
+#include <mach/sram.h>
+
+
+static struct gen_pool *sram_pool;
+
+void *sram_alloc(size_t len, dma_addr_t *dma)
+{
+ unsigned long vaddr;
+ dma_addr_t dma_base = davinci_soc_info.sram_dma;
+
+ if (dma)
+ *dma = 0;
+ if (!sram_pool || (dma && !dma_base))
+ return NULL;
+
+ vaddr = gen_pool_alloc(sram_pool, len);
+ if (!vaddr)
+ return NULL;
+
+ if (dma)
+ *dma = dma_base + (vaddr - SRAM_VIRT);
+ return (void *)vaddr;
+
+}
+EXPORT_SYMBOL(sram_alloc);
+
+void sram_free(void *addr, size_t len)
+{
+ gen_pool_free(sram_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(sram_free);
+
+
+/*
+ * REVISIT This supports CPU and DMA access to/from SRAM, but it
+ * doesn't (yet?) support some other notable uses of SRAM: as TCM
+ * for data and/or instructions; and holding code needed to enter
+ * and exit suspend states (while DRAM can't be used).
+ */
+static int __init sram_init(void)
+{
+ unsigned len = davinci_soc_info.sram_len;
+ int status = 0;
+
+ if (len) {
+ len = min(len, SRAM_SIZE);
+ sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
+ if (!sram_pool)
+ status = -ENOMEM;
+ }
+ if (sram_pool)
+ status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
+ WARN_ON(status < 0);
+ return status;
+}
+core_initcall(sram_init);
+
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 494e01b..0884ca5 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/device.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/system.h>
@@ -28,52 +29,41 @@
#include <asm/errno.h>
#include <mach/io.h>
#include <mach/cputype.h>
+#include <mach/time.h>
#include "clock.h"
static struct clock_event_device clockevent_davinci;
static unsigned int davinci_clock_tick_rate;
-#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
-#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
-#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00)
-
-enum {
- T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS,
-};
-
-#define IS_TIMER1(id) (id & 0x2)
-#define IS_TIMER0(id) (!IS_TIMER1(id))
-#define IS_TIMER_TOP(id) ((id & 0x1))
-#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
-
-static int timer_irqs[NUM_TIMERS] = {
- IRQ_TINT0_TINT12,
- IRQ_TINT0_TINT34,
- IRQ_TINT1_TINT12,
- IRQ_TINT1_TINT34,
-};
-
/*
* This driver configures the 2 64-bit count-up timers as 4 independent
* 32-bit count-up timers used as follows:
- *
- * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
- * T0_TOP: Timer 0, top : clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top : <unused>
*/
-#define TID_CLOCKEVENT T0_BOT
-#define TID_CLOCKSOURCE T0_TOP
+
+enum {
+ TID_CLOCKEVENT,
+ TID_CLOCKSOURCE,
+};
/* Timer register offsets */
-#define PID12 0x0
-#define TIM12 0x10
-#define TIM34 0x14
-#define PRD12 0x18
-#define PRD34 0x1c
-#define TCR 0x20
-#define TGCR 0x24
-#define WDTCR 0x28
+#define PID12 0x0
+#define TIM12 0x10
+#define TIM34 0x14
+#define PRD12 0x18
+#define PRD34 0x1c
+#define TCR 0x20
+#define TGCR 0x24
+#define WDTCR 0x28
+
+/* Offsets of the 8 compare registers */
+#define CMP12_0 0x60
+#define CMP12_1 0x64
+#define CMP12_2 0x68
+#define CMP12_3 0x6c
+#define CMP12_4 0x70
+#define CMP12_5 0x74
+#define CMP12_6 0x78
+#define CMP12_7 0x7c
/* Timer register bitfields */
#define TCR_ENAMODE_DISABLE 0x0
@@ -105,6 +95,7 @@
unsigned int id;
unsigned long period;
unsigned long opts;
+ unsigned long flags;
void __iomem *base;
unsigned long tim_off;
unsigned long prd_off;
@@ -114,30 +105,58 @@
static struct timer_s timers[];
/* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED 0x00
-#define TIMER_OPTS_ONESHOT 0x01
-#define TIMER_OPTS_PERIODIC 0x02
+#define TIMER_OPTS_DISABLED 0x01
+#define TIMER_OPTS_ONESHOT 0x02
+#define TIMER_OPTS_PERIODIC 0x04
+#define TIMER_OPTS_STATE_MASK 0x07
+
+#define TIMER_OPTS_USE_COMPARE 0x80000000
+#define USING_COMPARE(t) ((t)->opts & TIMER_OPTS_USE_COMPARE)
+
+static char *id_to_name[] = {
+ [T0_BOT] = "timer0_0",
+ [T0_TOP] = "timer0_1",
+ [T1_BOT] = "timer1_0",
+ [T1_TOP] = "timer1_1",
+};
static int timer32_config(struct timer_s *t)
{
- u32 tcr = __raw_readl(t->base + TCR);
+ u32 tcr;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
- /* disable timer */
- tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
- __raw_writel(tcr, t->base + TCR);
+ if (USING_COMPARE(t)) {
+ struct davinci_timer_instance *dtip =
+ soc_info->timer_info->timers;
+ int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
- /* reset counter to zero, set new period */
- __raw_writel(0, t->base + t->tim_off);
- __raw_writel(t->period, t->base + t->prd_off);
+ /*
+ * Next interrupt should be the current time reg value plus
+ * the new period (using 32-bit unsigned addition/wrapping
+ * to 0 on overflow). This assumes that the clocksource
+ * is setup to count to 2^32-1 before wrapping around to 0.
+ */
+ __raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
+ t->base + dtip[event_timer].cmp_off);
+ } else {
+ tcr = __raw_readl(t->base + TCR);
- /* Set enable mode */
- if (t->opts & TIMER_OPTS_ONESHOT) {
- tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
- } else if (t->opts & TIMER_OPTS_PERIODIC) {
- tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+ /* disable timer */
+ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
+ __raw_writel(tcr, t->base + TCR);
+
+ /* reset counter to zero, set new period */
+ __raw_writel(0, t->base + t->tim_off);
+ __raw_writel(t->period, t->base + t->prd_off);
+
+ /* Set enable mode */
+ if (t->opts & TIMER_OPTS_ONESHOT)
+ tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
+ else if (t->opts & TIMER_OPTS_PERIODIC)
+ tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+
+ __raw_writel(tcr, t->base + TCR);
}
-
- __raw_writel(tcr, t->base + TCR);
return 0;
}
@@ -182,13 +201,14 @@
static void __init timer_init(void)
{
- u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
int i;
/* Global init of each 64-bit timer as a whole */
for(i=0; i<2; i++) {
u32 tgcr;
- void __iomem *base = IO_ADDRESS(phys_bases[i]);
+ void __iomem *base = dtip[i].base;
/* Disabled, Internal clock source */
__raw_writel(0, base + TCR);
@@ -214,33 +234,33 @@
/* Init of each timer as a 32-bit timer */
for (i=0; i< ARRAY_SIZE(timers); i++) {
struct timer_s *t = &timers[i];
- u32 phys_base;
+ int timer = ID_TO_TIMER(t->id);
+ u32 irq;
- if (t->name) {
- t->id = i;
- phys_base = (IS_TIMER1(t->id) ?
- DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
- t->base = IO_ADDRESS(phys_base);
+ t->base = dtip[timer].base;
- if (IS_TIMER_BOT(t->id)) {
- t->enamode_shift = 6;
- t->tim_off = TIM12;
- t->prd_off = PRD12;
- } else {
- t->enamode_shift = 22;
- t->tim_off = TIM34;
- t->prd_off = PRD34;
- }
-
- /* Register interrupt */
- t->irqaction.name = t->name;
- t->irqaction.dev_id = (void *)t;
- if (t->irqaction.handler != NULL) {
- setup_irq(timer_irqs[t->id], &t->irqaction);
- }
-
- timer32_config(&timers[i]);
+ if (IS_TIMER_BOT(t->id)) {
+ t->enamode_shift = 6;
+ t->tim_off = TIM12;
+ t->prd_off = PRD12;
+ irq = dtip[timer].bottom_irq;
+ } else {
+ t->enamode_shift = 22;
+ t->tim_off = TIM34;
+ t->prd_off = PRD34;
+ irq = dtip[timer].top_irq;
}
+
+ /* Register interrupt */
+ t->irqaction.name = t->name;
+ t->irqaction.dev_id = (void *)t;
+
+ if (t->irqaction.handler != NULL) {
+ irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
+ setup_irq(irq, &t->irqaction);
+ }
+
+ timer32_config(&timers[i]);
}
}
@@ -255,7 +275,6 @@
}
static struct clocksource clocksource_davinci = {
- .name = "timer0_1",
.rating = 300,
.read = read_cycles,
.mask = CLOCKSOURCE_MASK(32),
@@ -284,15 +303,18 @@
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
t->period = davinci_clock_tick_rate / (HZ);
- t->opts = TIMER_OPTS_PERIODIC;
+ t->opts &= ~TIMER_OPTS_STATE_MASK;
+ t->opts |= TIMER_OPTS_PERIODIC;
timer32_config(t);
break;
case CLOCK_EVT_MODE_ONESHOT:
- t->opts = TIMER_OPTS_ONESHOT;
+ t->opts &= ~TIMER_OPTS_STATE_MASK;
+ t->opts |= TIMER_OPTS_ONESHOT;
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
- t->opts = TIMER_OPTS_DISABLED;
+ t->opts &= ~TIMER_OPTS_STATE_MASK;
+ t->opts |= TIMER_OPTS_DISABLED;
break;
case CLOCK_EVT_MODE_RESUME:
break;
@@ -300,7 +322,6 @@
}
static struct clock_event_device clockevent_davinci = {
- .name = "timer0_0",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_next_event = davinci_set_next_event,
@@ -311,10 +332,42 @@
static void __init davinci_timer_init(void)
{
struct clk *timer_clk;
-
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ unsigned int clockevent_id;
+ unsigned int clocksource_id;
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
+ clockevent_id = soc_info->timer_info->clockevent_id;
+ clocksource_id = soc_info->timer_info->clocksource_id;
+
+ timers[TID_CLOCKEVENT].id = clockevent_id;
+ timers[TID_CLOCKSOURCE].id = clocksource_id;
+
+ /*
+ * If using same timer for both clock events & clocksource,
+ * a compare register must be used to generate an event interrupt.
+ * This is equivalent to a oneshot timer only (not periodic).
+ */
+ if (clockevent_id == clocksource_id) {
+ struct davinci_timer_instance *dtip =
+ soc_info->timer_info->timers;
+ int event_timer = ID_TO_TIMER(clockevent_id);
+
+ /* Only bottom timers can use compare regs */
+ if (IS_TIMER_TOP(clockevent_id))
+ pr_warning("davinci_timer_init: Invalid use"
+ " of system timers. Results unpredictable.\n");
+ else if ((dtip[event_timer].cmp_off == 0)
+ || (dtip[event_timer].cmp_irq == 0))
+ pr_warning("davinci_timer_init: Invalid timer instance"
+ " setup. Results unpredictable.\n");
+ else {
+ timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
+ clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
+ }
+ }
+
/* init timer hw */
timer_init();
@@ -325,6 +378,7 @@
davinci_clock_tick_rate = clk_get_rate(timer_clk);
/* setup clocksource */
+ clocksource_davinci.name = id_to_name[clocksource_id];
clocksource_davinci.mult =
clocksource_khz2mult(davinci_clock_tick_rate/1000,
clocksource_davinci.shift);
@@ -332,12 +386,12 @@
printk(err, clocksource_davinci.name);
/* setup clockevent */
+ clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
- clockevent_davinci.min_delta_ns =
- clockevent_delta2ns(1, &clockevent_davinci);
+ clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
clockevent_davinci.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_davinci);
@@ -349,15 +403,14 @@
/* reset board using watchdog timer */
-void davinci_watchdog_reset(void) {
+void davinci_watchdog_reset(void)
+{
u32 tgcr, wdtcr;
- void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
- struct device dev;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ void __iomem *base = soc_info->wdt_base;
struct clk *wd_clk;
- char *name = "watchdog";
- dev_set_name(&dev, name);
- wd_clk = clk_get(&dev, NULL);
+ wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
if (WARN_ON(IS_ERR(wd_clk)))
return;
clk_enable(wd_clk);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ae24486..c535e88 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -450,10 +450,19 @@
};
+static struct resource ep93xx_rtc_resource[] = {
+ {
+ .start = EP93XX_RTC_PHYS_BASE,
+ .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct platform_device ep93xx_rtc_device = {
- .name = "ep93xx-rtc",
- .id = -1,
- .num_resources = 0,
+ .name = "ep93xx-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_rtc_resource),
+ .resource = ep93xx_rtc_resource,
};
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 1732de7..420f71b 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,6 +147,7 @@
#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
deleted file mode 100644
index cddd194..0000000
--- a/arch/arm/mach-imx/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-menu "IMX Implementations"
- depends on ARCH_IMX
-
-config ARCH_MX1ADS
- bool "mx1ads"
- depends on ARCH_IMX
- select ISA
- help
- Say Y here if you are using the Motorola MX1ADS board
-
-endmenu
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
deleted file mode 100644
index b047c7e..0000000
--- a/arch/arm/mach-imx/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y += irq.o time.o dma.o generic.o clock.o
-
-obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-
-# Support for blinky lights
-led-y := leds.o
-
-obj-$(CONFIG_LEDS) += $(led-y)
-led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index fd72ce5..0000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
- zreladdr-$(CONFIG_ARCH_MX1ADS) := 0x08008000
-
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
deleted file mode 100644
index cf332ae..0000000
--- a/arch/arm/mach-imx/clock.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple approach: We can't disable clocks, so we do
- * not need refcounting
- */
-
-struct clk {
- struct list_head node;
- const char *name;
- unsigned long (*get_rate)(void);
-};
-
-/*
- * get the system pll clock in Hz
- *
- * mfi + mfn / (mfd +1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
-{
- unsigned long long ll;
- unsigned long quot;
-
- u32 mfi = (pll >> 10) & 0xf;
- u32 mfn = pll & 0x3ff;
- u32 mfd = (pll >> 16) & 0x3ff;
- u32 pd = (pll >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- ll = 2 * (unsigned long long)f_ref *
- ((mfi << 16) + (mfn << 16) / (mfd + 1));
- quot = (pd + 1) * (1 << 16);
- ll += quot / 2;
- do_div(ll, quot);
- return (unsigned long)ll;
-}
-
-static unsigned long imx_get_system_clk(void)
-{
- u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
- return imx_decode_pll(SPCTL0, f_ref);
-}
-
-static unsigned long imx_get_mcu_clk(void)
-{
- return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-
-/*
- * get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long imx_get_perclk1(void)
-{
- return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-
-/*
- * get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long imx_get_perclk2(void)
-{
- return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-
-/*
- * get peripheral clock 3 ( SSI )
- */
-static unsigned long imx_get_perclk3(void)
-{
- return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-
-/*
- * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long imx_get_hclk(void)
-{
- return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-
-static struct clk clk_system_clk = {
- .name = "system_clk",
- .get_rate = imx_get_system_clk,
-};
-
-static struct clk clk_hclk = {
- .name = "hclk",
- .get_rate = imx_get_hclk,
-};
-
-static struct clk clk_mcu_clk = {
- .name = "mcu_clk",
- .get_rate = imx_get_mcu_clk,
-};
-
-static struct clk clk_perclk1 = {
- .name = "perclk1",
- .get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_uart_clk = {
- .name = "uart_clk",
- .get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_perclk2 = {
- .name = "perclk2",
- .get_rate = imx_get_perclk2,
-};
-
-static struct clk clk_perclk3 = {
- .name = "perclk3",
- .get_rate = imx_get_perclk3,
-};
-
-static struct clk *clks[] = {
- &clk_perclk1,
- &clk_perclk2,
- &clk_perclk3,
- &clk_system_clk,
- &clk_hclk,
- &clk_mcu_clk,
- &clk_uart_clk,
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
-
- mutex_lock(&clocks_mutex);
- list_for_each_entry(p, &clocks, node) {
- if (!strcmp(p->name, id)) {
- clk = p;
- goto found;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->get_rate();
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int imx_clocks_init(void)
-{
- int i;
-
- mutex_lock(&clocks_mutex);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- list_add(&clks[i]->node, &clocks);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
deleted file mode 100644
index 434b4ca..0000000
--- a/arch/arm/mach-imx/cpufreq.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * cpu.c: clock scaling for the iMX
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * Based on SA1100 version written by:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/system.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#ifndef __val2mfld
-#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
-#endif
-#ifndef __mfld2val
-#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
-#endif
-
-#define CR_920T_CLOCK_MODE 0xC0000000
-#define CR_920T_FASTBUS_MODE 0x00000000
-#define CR_920T_ASYNC_MODE 0xC0000000
-
-static u32 mpctl0_at_boot;
-static u32 bclk_div_at_boot;
-
-static struct clk *system_clk, *mcu_clk;
-
-static void imx_set_async_mode(void)
-{
- adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
-}
-
-static void imx_set_fastbus_mode(void)
-{
- adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
-}
-
-static void imx_set_mpctl0(u32 mpctl0)
-{
- unsigned long flags;
-
- if (mpctl0 == 0) {
- local_irq_save(flags);
- CSCR &= ~CSCR_MPEN;
- local_irq_restore(flags);
- return;
- }
-
- local_irq_save(flags);
- MPCTL0 = mpctl0;
- CSCR |= CSCR_MPEN;
- local_irq_restore(flags);
-}
-
-/**
- * imx_compute_mpctl - compute new PLL parameters
- * @new_mpctl: pointer to location assigned by new PLL control register value
- * @cur_mpctl: current PLL control register parameters
- * @f_ref: reference source frequency Hz
- * @freq: required frequency in Hz
- * @relation: is one of %CPUFREQ_RELATION_L (supremum)
- * and %CPUFREQ_RELATION_H (infimum)
- */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
-{
- u32 mfi;
- u32 mfn;
- u32 mfd;
- u32 pd;
- unsigned long long ll;
- long l;
- long quot;
-
- /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
- /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
-
- if (cur_mpctl) {
- mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
- pd = ((cur_mpctl >> 26) & 0xf) + 1;
- } else {
- pd=2; mfd=313;
- }
-
- /* pd=2; mfd=313; mfi=8; mfn=183; */
- /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
-
- quot = (f_ref + (1 << 9)) >> 10;
- l = (freq * pd + quot) / (2 * quot);
- mfi = l >> 10;
- mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
-
- mfd -= 1;
- pd -= 1;
-
- *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
- | ((pd & 0xf) << 26);
-
- ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
- quot = (pd+1) * (1<<16);
- ll += quot / 2;
- do_div(ll, quot);
- freq = ll;
-
- pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
- pd, mfd, mfi, mfn, freq);
-
- return freq;
-}
-
-
-static int imx_verify_speed(struct cpufreq_policy *policy)
-{
- if (policy->cpu != 0)
- return -EINVAL;
-
- cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
- return 0;
-}
-
-static unsigned int imx_get_speed(unsigned int cpu)
-{
- unsigned int freq;
- unsigned int cr;
- unsigned int cscr;
- unsigned int bclk_div;
-
- if (cpu)
- return 0;
-
- cscr = CSCR;
- bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
- cr = get_cr();
-
- if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
- freq = clk_get_rate(system_clk);
- freq = (freq + bclk_div/2) / bclk_div;
- } else {
- freq = clk_get_rate(mcu_clk);
- if (cscr & CSCR_MPU_PRESC)
- freq /= 2;
- }
-
- freq = (freq + 500) / 1000;
-
- return freq;
-}
-
-static int imx_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_freqs freqs;
- u32 mpctl0 = 0;
- u32 cscr;
- unsigned long flags;
- long freq;
- long sysclk;
- unsigned int bclk_div = bclk_div_at_boot;
-
- /*
- * Some governors do not respects CPU and policy lower limits
- * which leads to bad things (division by zero etc), ensure
- * that such things do not happen.
- */
- if(target_freq < policy->cpuinfo.min_freq)
- target_freq = policy->cpuinfo.min_freq;
-
- if(target_freq < policy->min)
- target_freq = policy->min;
-
- freq = target_freq * 1000;
-
- pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
- freq, mpctl0_at_boot);
-
- sysclk = clk_get_rate(system_clk);
-
- if (freq > sysclk / bclk_div_at_boot + 1000000) {
- freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
- if (freq < 0) {
- printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
- return -EINVAL;
- }
- } else {
- if(freq + 1000 < sysclk) {
- if (relation == CPUFREQ_RELATION_L)
- bclk_div = (sysclk - 1000) / freq;
- else
- bclk_div = (sysclk + freq + 1000) / freq;
-
- if(bclk_div > 16)
- bclk_div = 16;
- if(bclk_div < bclk_div_at_boot)
- bclk_div = bclk_div_at_boot;
- }
- freq = (sysclk + bclk_div / 2) / bclk_div;
- }
-
- freqs.old = imx_get_speed(0);
- freqs.new = (freq + 500) / 1000;
- freqs.cpu = 0;
- freqs.flags = 0;
-
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- local_irq_save(flags);
-
- imx_set_fastbus_mode();
-
- imx_set_mpctl0(mpctl0);
-
- cscr = CSCR;
- cscr &= ~CSCR_BCLK_DIV;
- cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
- CSCR = cscr;
-
- if(mpctl0) {
- CSCR |= CSCR_MPLL_RESTART;
-
- /* Wait until MPLL is stabilized */
- while( CSCR & CSCR_MPLL_RESTART );
-
- imx_set_async_mode();
- }
-
- local_irq_restore(flags);
-
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
- pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
- freq, mpctl0? "MPLL": "SPLL");
-
- return 0;
-}
-
-static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
- printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
-
- if (policy->cpu != 0)
- return -EINVAL;
-
- policy->cur = policy->min = policy->max = imx_get_speed(0);
- policy->cpuinfo.min_freq = 8000;
- policy->cpuinfo.max_freq = 200000;
- /* Manual states, that PLL stabilizes in two CLK32 periods */
- policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
- return 0;
-}
-
-static struct cpufreq_driver imx_driver = {
- .flags = CPUFREQ_STICKY,
- .verify = imx_verify_speed,
- .target = imx_set_target,
- .get = imx_get_speed,
- .init = imx_cpufreq_driver_init,
- .name = "imx",
-};
-
-static int __init imx_cpufreq_init(void)
-{
- bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
- mpctl0_at_boot = 0;
-
- system_clk = clk_get(NULL, "system_clk");
- if (IS_ERR(system_clk))
- return PTR_ERR(system_clk);
-
- mcu_clk = clk_get(NULL, "mcu_clk");
- if (IS_ERR(mcu_clk)) {
- clk_put(system_clk);
- return PTR_ERR(mcu_clk);
- }
-
- if((CSCR & CSCR_MPEN) &&
- ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
- mpctl0_at_boot = MPCTL0;
-
- return cpufreq_register_driver(&imx_driver);
-}
-
-arch_initcall(imx_cpufreq_init);
-
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
deleted file mode 100644
index 1536583..0000000
--- a/arch/arm/mach-imx/dma.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/dma.c
- *
- * imx DMA registration and IRQ dispatching
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 2004-03-03 Sascha Hauer <sascha@saschahauer.de>
- * initial version heavily inspired by
- * linux/arch/arm/mach-pxa/dma.c
- *
- * 2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Changed to support scatter gather DMA
- * by taking Russell's code from RiscPC
- *
- * 2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Corrected error handling code.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/scatterlist.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/imx-dma.h>
-
-struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @lastcount: number of bytes transferred during last transfer
- *
- * Functions prepares DMA controller for next sg data chunk transfer.
- * The @lastcount argument informs function about number of bytes transferred
- * during last block. Zero value can be used for @lastcount to setup DMA
- * for the first chunk.
- */
-static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned int nextcount;
- unsigned int nextaddr;
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return 0;
- }
-
- imxdma->resbytes -= lastcount;
-
- if (!imxdma->sg) {
- pr_debug("imxdma%d: no sg data\n", dma_ch);
- return 0;
- }
-
- imxdma->sgbc += lastcount;
- if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
- if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
- pr_debug("imxdma%d: sg transfer limit reached\n",
- dma_ch);
- imxdma->sgcount=0;
- imxdma->sg = NULL;
- return 0;
- } else {
- imxdma->sgcount--;
- imxdma->sg++;
- imxdma->sgbc = 0;
- }
- }
- nextcount = imxdma->sg->length - imxdma->sgbc;
- nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
-
- if(imxdma->resbytes < nextcount)
- nextcount = imxdma->resbytes;
-
- if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
- DAR(dma_ch) = nextaddr;
- else
- SAR(dma_ch) = nextaddr;
-
- CNTR(dma_ch) = nextcount;
- pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
- dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
-
- return nextcount;
-}
-
-/*
- * imx_dma_setup_sg_base - scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- *
- * Functions sets up i.MX DMA state for emulated scatter-gather transfer
- * and sets up channel registers to be ready for the first chunk
- */
-static int
-imx_dma_setup_sg_base(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = sg;
- imxdma->sgcount = sgcount;
- imxdma->sgbc = 0;
- return imx_dma_sg_next(dma_ch, 0);
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- * to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- * or %DMA_MODE_WRITE from memory to the device
- *
- * The function setups DMA channel source and destination addresses for transfer
- * specified by provided parameters. The scatter-gather emulation is disabled,
- * because linear data block
- * form the physical address range is transferred.
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
- unsigned int dma_length, unsigned int dev_addr,
- unsigned int dmamode)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = NULL;
- imxdma->sgcount = 0;
- imxdma->dma_mode = dmamode;
- imxdma->resbytes = dma_length;
-
- if (!dma_address) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
- dma_ch);
- return -EINVAL;
- }
-
- if (!dma_length) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
- dma_ch);
- return -EINVAL;
- }
-
- if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
- pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
- dma_ch, (unsigned int)dma_address, dma_length,
- dev_addr);
- SAR(dma_ch) = dev_addr;
- DAR(dma_ch) = (unsigned int)dma_address;
- } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
- pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
- dma_ch, (unsigned int)dma_address, dma_length,
- dev_addr);
- SAR(dma_ch) = (unsigned int)dma_address;
- DAR(dma_ch) = dev_addr;
- } else {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
- dma_ch);
- return -EINVAL;
- }
-
- CNTR(dma_ch) = dma_length;
-
- return 0;
-}
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- * or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for transfer
- * specified by provided parameters. The scatter-gather emulation is set up
- * according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
- * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, unsigned int dmamode)
-{
- int res;
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = NULL;
- imxdma->sgcount = 0;
- imxdma->dma_mode = dmamode;
- imxdma->resbytes = dma_length;
-
- if (!sg || !sgcount) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
- dma_ch);
- return -EINVAL;
- }
-
- if (!sg->length) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
- dma_ch);
- return -EINVAL;
- }
-
- if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
- pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
- dma_ch, sg, sgcount, dma_length, dev_addr);
- SAR(dma_ch) = dev_addr;
- } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
- pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
- dma_ch, sg, sgcount, dma_length, dev_addr);
- DAR(dma_ch) = dev_addr;
- } else {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
- dma_ch);
- return -EINVAL;
- }
-
- res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
- if (res <= 0) {
- printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
- return -EINVAL;
- }
-
- return 0;
-}
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
- * @dma_ch: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- * ends successfully
- * @err_handler: the pointer to the function called if the premature
- * end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
- void (*irq_handler) (int, void *),
- void (*err_handler) (int, void *, int),
- void *data)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return -ENODEV;
- }
-
- local_irq_save(flags);
- DISR = (1 << dma_ch);
- imxdma->irq_handler = irq_handler;
- imxdma->err_handler = err_handler;
- imxdma->data = data;
- local_irq_restore(flags);
- return 0;
-}
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @dma_ch: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(imx_dmach_t dma_ch)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return;
- }
-
- local_irq_save(flags);
- DISR = (1 << dma_ch);
- DIMR &= ~(1 << dma_ch);
- CCR(dma_ch) |= CCR_CEN;
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_disable(imx_dmach_t dma_ch)
-{
- unsigned long flags;
-
- pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
-
- local_irq_save(flags);
- DIMR |= (1 << dma_ch);
- CCR(dma_ch) &= ~CCR_CEN;
- DISR = (1 << dma_ch);
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @dma_ch: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(imx_dmach_t dma_ch, const char *name)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- /* basic sanity checks */
- if (!name)
- return -EINVAL;
-
- if (dma_ch >= IMX_DMA_CHANNELS) {
- printk(KERN_CRIT "%s: called for non-existed channel %d\n",
- __func__, dma_ch);
- return -EINVAL;
- }
-
- local_irq_save(flags);
- if (imxdma->name) {
- local_irq_restore(flags);
- return -ENODEV;
- }
-
- imxdma->name = name;
- imxdma->irq_handler = NULL;
- imxdma->err_handler = NULL;
- imxdma->data = NULL;
- imxdma->sg = NULL;
- local_irq_restore(flags);
- return 0;
-}
-
-/**
- * imx_dma_free - release previously acquired channel
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_free(imx_dmach_t dma_ch)
-{
- unsigned long flags;
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- if (!imxdma->name) {
- printk(KERN_CRIT
- "%s: trying to free channel %d which is already freed\n",
- __func__, dma_ch);
- return;
- }
-
- local_irq_save(flags);
- /* Disable interrupts */
- DIMR |= (1 << dma_ch);
- CCR(dma_ch) &= ~CCR_CEN;
- imxdma->name = NULL;
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @name: the driver/caller own non-%NULL identification
- * @prio: one of the hardware distinguished priority level:
- * %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
- *
- * This function tries to find free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- * On successful allocation channel is returned.
- */
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
-{
- int i;
- int best;
-
- switch (prio) {
- case (DMA_PRIO_HIGH):
- best = 8;
- break;
- case (DMA_PRIO_MEDIUM):
- best = 4;
- break;
- case (DMA_PRIO_LOW):
- default:
- best = 0;
- break;
- }
-
- for (i = best; i < IMX_DMA_CHANNELS; i++) {
- if (!imx_dma_request(i, name)) {
- return i;
- }
- }
-
- for (i = best - 1; i >= 0; i--) {
- if (!imx_dma_request(i, name)) {
- return i;
- }
- }
-
- printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
- return -ENODEV;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
- int i, disr = DISR;
- struct imx_dma_channel *channel;
- unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
- int errcode;
-
- DISR = disr & err_mask;
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- if(!(err_mask & (1 << i)))
- continue;
- channel = &imx_dma_channels[i];
- errcode = 0;
-
- if (DBTOSR & (1 << i)) {
- DBTOSR = (1 << i);
- errcode |= IMX_DMA_ERR_BURST;
- }
- if (DRTOSR & (1 << i)) {
- DRTOSR = (1 << i);
- errcode |= IMX_DMA_ERR_REQUEST;
- }
- if (DSESR & (1 << i)) {
- DSESR = (1 << i);
- errcode |= IMX_DMA_ERR_TRANSFER;
- }
- if (DBOSR & (1 << i)) {
- DBOSR = (1 << i);
- errcode |= IMX_DMA_ERR_BUFFER;
- }
-
- /*
- * The cleaning of @sg field would be questionable
- * there, because its value can help to compute
- * remaining/transferred bytes count in the handler
- */
- /*imx_dma_channels[i].sg = NULL;*/
-
- if (channel->name && channel->err_handler) {
- channel->err_handler(i, channel->data, errcode);
- continue;
- }
-
- imx_dma_channels[i].sg = NULL;
-
- printk(KERN_WARNING
- "DMA timeout on channel %d (%s) -%s%s%s%s\n",
- i, channel->name,
- errcode&IMX_DMA_ERR_BURST? " burst":"",
- errcode&IMX_DMA_ERR_REQUEST? " request":"",
- errcode&IMX_DMA_ERR_TRANSFER? " transfer":"",
- errcode&IMX_DMA_ERR_BUFFER? " buffer":"");
- }
- return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
- int i, disr = DISR;
-
- pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
- disr);
-
- DISR = disr;
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- if (disr & (1 << i)) {
- struct imx_dma_channel *channel = &imx_dma_channels[i];
- if (channel->name) {
- if (imx_dma_sg_next(i, CNTR(i))) {
- CCR(i) &= ~CCR_CEN;
- mb();
- CCR(i) |= CCR_CEN;
- } else {
- if (channel->irq_handler)
- channel->irq_handler(i,
- channel->data);
- }
- } else {
- /*
- * IRQ for an unregistered DMA channel:
- * let's clear the interrupts and disable it.
- */
- printk(KERN_WARNING
- "spurious IRQ for DMA channel %d\n", i);
- }
- }
- }
- return IRQ_HANDLED;
-}
-
-static int __init imx_dma_init(void)
-{
- int ret;
- int i;
-
- /* reset DMA module */
- DCR = DCR_DRST;
-
- ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
- return ret;
- }
-
- ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n");
- free_irq(DMA_INT, NULL);
- }
-
- /* enable DMA module */
- DCR = DCR_DEN;
-
- /* clear all interrupts */
- DISR = (1 << IMX_DMA_CHANNELS) - 1;
-
- /* enable interrupts */
- DIMR = (1 << IMX_DMA_CHANNELS) - 1;
-
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- imx_dma_channels[i].sg = NULL;
- imx_dma_channels[i].dma_num = i;
- }
-
- return ret;
-}
-
-arch_initcall(imx_dma_init);
-
-EXPORT_SYMBOL(imx_dma_setup_single);
-EXPORT_SYMBOL(imx_dma_setup_sg);
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-EXPORT_SYMBOL(imx_dma_enable);
-EXPORT_SYMBOL(imx_dma_disable);
-EXPORT_SYMBOL(imx_dma_request);
-EXPORT_SYMBOL(imx_dma_free);
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-EXPORT_SYMBOL(imx_dma_channels);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
deleted file mode 100644
index 05f1739..0000000
--- a/arch/arm/mach-imx/generic.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * arch/arm/mach-imx/generic.c
- *
- * author: Sascha Hauer
- * Created: april 20th, 2004
- * Copyright: Synertronixx GmbH
- *
- * Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/errno.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#include <asm/mach/map.h>
-#include <mach/mmc.h>
-#include <mach/gpio.h>
-
-unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
-
-void imx_gpio_mode(int gpio_mode)
-{
- unsigned int pin = gpio_mode & GPIO_PIN_MASK;
- unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
- unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
- unsigned int tmp;
-
- /* Pullup enable */
- if(gpio_mode & GPIO_PUEN)
- PUEN(port) |= (1<<pin);
- else
- PUEN(port) &= ~(1<<pin);
-
- /* Data direction */
- if(gpio_mode & GPIO_OUT)
- DDIR(port) |= 1<<pin;
- else
- DDIR(port) &= ~(1<<pin);
-
- /* Primary / alternate function */
- if(gpio_mode & GPIO_AF)
- GPR(port) |= (1<<pin);
- else
- GPR(port) &= ~(1<<pin);
-
- /* use as gpio? */
- if(gpio_mode & GPIO_GIUS)
- GIUS(port) |= (1<<pin);
- else
- GIUS(port) &= ~(1<<pin);
-
- /* Output / input configuration */
- /* FIXME: I'm not very sure about OCR and ICONF, someone
- * should have a look over it
- */
- if(pin<16) {
- tmp = OCR1(port);
- tmp &= ~( 3<<(pin*2));
- tmp |= (ocr << (pin*2));
- OCR1(port) = tmp;
-
- ICONFA1(port) &= ~( 3<<(pin*2));
- ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
- ICONFB1(port) &= ~( 3<<(pin*2));
- ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
- } else {
- tmp = OCR2(port);
- tmp &= ~( 3<<((pin-16)*2));
- tmp |= (ocr << ((pin-16)*2));
- OCR2(port) = tmp;
-
- ICONFA2(port) &= ~( 3<<((pin-16)*2));
- ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
- ICONFB2(port) &= ~( 3<<((pin-16)*2));
- ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
- }
-}
-
-EXPORT_SYMBOL(imx_gpio_mode);
-
-int imx_gpio_request(unsigned gpio, const char *label)
-{
- if(gpio >= (GPIO_PORT_MAX + 1) * 32) {
- printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
- gpio, label ? label : "?");
- return -EINVAL;
- }
-
- if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
- printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
- gpio, label ? label : "?");
- return -EBUSY;
- }
-
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_request);
-
-void imx_gpio_free(unsigned gpio)
-{
- if(gpio >= (GPIO_PORT_MAX + 1) * 32)
- return;
-
- clear_bit(gpio, imx_gpio_alloc_map);
-}
-
-EXPORT_SYMBOL(imx_gpio_free);
-
-int imx_gpio_direction_input(unsigned gpio)
-{
- imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR);
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_input);
-
-int imx_gpio_direction_output(unsigned gpio, int value)
-{
- imx_gpio_set_value(gpio, value);
- imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR);
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_output);
-
-int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- int alloc_mode, const char *label)
-{
- const int *p = pin_list;
- int i;
- unsigned gpio;
- unsigned mode;
-
- for (i = 0; i < count; i++) {
- gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
- if (gpio >= (GPIO_PORT_MAX + 1) * 32)
- goto setup_error;
-
- if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
- imx_gpio_free(gpio);
- else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
- if (imx_gpio_request(gpio, label))
- if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
- goto setup_error;
-
- if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
- IMX_GPIO_ALLOC_MODE_RELEASE)))
- imx_gpio_mode(gpio | mode);
-
- p++;
- }
- return 0;
-
-setup_error:
- if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
- IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
- return -EINVAL;
-
- while (p != pin_list) {
- p--;
- gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- imx_gpio_free(gpio);
- }
-
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
-
-void __imx_gpio_set_value(unsigned gpio, int value)
-{
- imx_gpio_set_value_inline(gpio, value);
-}
-
-EXPORT_SYMBOL(__imx_gpio_set_value);
-
-int imx_gpio_to_irq(unsigned gpio)
-{
- return IRQ_GPIOA(0) + gpio;
-}
-
-EXPORT_SYMBOL(imx_gpio_to_irq);
-
-int imx_irq_to_gpio(unsigned irq)
-{
- if (irq < IRQ_GPIOA(0))
- return -EINVAL;
- return irq - IRQ_GPIOA(0);
-}
-
-EXPORT_SYMBOL(imx_irq_to_gpio);
-
-static struct resource imx_mmc_resources[] = {
- [0] = {
- .start = 0x00214000,
- .end = 0x002140FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (SDHC_INT),
- .end = (SDHC_INT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 imxmmmc_dmamask = 0xffffffffUL;
-
-static struct platform_device imx_mmc_device = {
- .name = "imx-mmc",
- .id = 0,
- .dev = {
- .dma_mask = &imxmmmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(imx_mmc_resources),
- .resource = imx_mmc_resources,
-};
-
-void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
-{
- imx_mmc_device.dev.platform_data = info;
-}
-
-static struct platform_device *devices[] __initdata = {
- &imx_mmc_device,
-};
-
-static struct map_desc imx_io_desc[] __initdata = {
- {
- .virtual = IMX_IO_BASE,
- .pfn = __phys_to_pfn(IMX_IO_PHYS),
- .length = IMX_IO_SIZE,
- .type = MT_DEVICE
- }
-};
-
-void __init
-imx_map_io(void)
-{
- iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-static int __init imx_init(void)
-{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(imx_init);
diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h
deleted file mode 100644
index e91003e..0000000
--- a/arch/arm/mach-imx/generic.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/generic.h
- *
- * Author: Sascha Hauer <sascha@saschahauer.de>
- * Copyright: Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init imx_map_io(void);
-extern void __init imx_init_irq(void);
-
-struct sys_timer;
-extern struct sys_timer imx_timer;
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
deleted file mode 100644
index 87802bbf..0000000
--- a/arch/arm/mach-imx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x00000000 @ physical
- movne \rx, #0xe0000000 @ virtual
- orreq \rx, \rx, #0x00200000 @ physical
- orr \rx, \rx, #0x00006000 @ UART1 offset
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x40] @ TXDATA
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x98] @ SR2
- tst \rd, #1 << 3 @ TXDC
- beq 1002b @ wait until transmit done
- .endm
diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h
deleted file mode 100644
index 621ff2c..0000000
--- a/arch/arm/mach-imx/include/mach/dma.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/include/asm-arm/imxads/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T 2
-#define DMA_REQ_UART3_R 3
-#define DMA_REQ_SSI2_T 4
-#define DMA_REQ_SSI2_R 5
-#define DMA_REQ_CSI_STAT 6
-#define DMA_REQ_CSI_R 7
-#define DMA_REQ_MSHC 8
-#define DMA_REQ_DSPA_DCT_DOUT 9
-#define DMA_REQ_DSPA_DCT_DIN 10
-#define DMA_REQ_DSPA_MAC 11
-#define DMA_REQ_EXT 12
-#define DMA_REQ_SDHC 13
-#define DMA_REQ_SPI1_R 14
-#define DMA_REQ_SPI1_T 15
-#define DMA_REQ_SSI_T 16
-#define DMA_REQ_SSI_R 17
-#define DMA_REQ_ASP_DAC 18
-#define DMA_REQ_ASP_ADC 19
-#define DMA_REQ_USP_EP(x) (20+(x))
-#define DMA_REQ_SPI2_R 26
-#define DMA_REQ_SPI2_T 27
-#define DMA_REQ_UART2_T 28
-#define DMA_REQ_UART2_R 29
-#define DMA_REQ_UART1_T 30
-#define DMA_REQ_UART1_R 31
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
deleted file mode 100644
index e4db679..0000000
--- a/arch/arm/mach-imx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
-#define AITC_NIVECSR 0x40
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(IMX_AITC_BASE)
- @ Load offset & priority of the highest priority
- @ interrupt pending.
- ldr \irqstat, [\base, #AITC_NIVECSR]
- @ Shift off the priority leaving the offset or
- @ "interrupt number", use arithmetic shift to
- @ transform illegal source (0xffff) as -1
- mov \irqnr, \irqstat, asr #16
- adds \tmp, \irqnr, #1
- .endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
deleted file mode 100644
index 6c2942f..0000000
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL 0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4
-#define IMX_GPIO_ALLOC_MODE_RELEASE 8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
- return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
- unsigned long flags;
-
- raw_local_irq_save(flags);
- if(value)
- DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
- else
- DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
- raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
- if(__builtin_constant_p(gpio))
- imx_gpio_set_value_inline(gpio, value);
- else
- __imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- might_sleep();
-
- imx_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
deleted file mode 100644
index c73e9e7..0000000
--- a/arch/arm/mach-imx/include/mach/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/hardware.h
- *
- * Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS 0x00200000
-#define IMX_IO_SIZE 0x00100000
-#define IMX_IO_BASE 0xe0000000
-
-#define IMX_CS0_PHYS 0x10000000
-#define IMX_CS0_SIZE 0x02000000
-#define IMX_CS0_VIRT 0xe8000000
-
-#define IMX_CS1_PHYS 0x12000000
-#define IMX_CS1_SIZE 0x01000000
-#define IMX_CS1_VIRT 0xea000000
-
-#define IMX_CS2_PHYS 0x13000000
-#define IMX_CS2_SIZE 0x01000000
-#define IMX_CS2_VIRT 0xeb000000
-
-#define IMX_CS3_PHYS 0x14000000
-#define IMX_CS3_SIZE 0x01000000
-#define IMX_CS3_VIRT 0xec000000
-
-#define IMX_CS4_PHYS 0x15000000
-#define IMX_CS4_SIZE 0x01000000
-#define IMX_CS4_VIRT 0xed000000
-
-#define IMX_CS5_PHYS 0x16000000
-#define IMX_CS5_SIZE 0x01000000
-#define IMX_CS5_VIRT 0xee000000
-
-#define IMX_FB_VIRT 0xF1000000
-#define IMX_FB_SIZE (256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM 62
-#define MAXFIQNUM 62
-#define MAXSWINUM 62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE 0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
deleted file mode 100644
index bbe54df..0000000
--- a/arch/arm/mach-imx/include/mach/imx-dma.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/include/asm-arm/imxads/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <mach/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS 11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- * (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
- const char *name;
- void (*irq_handler) (int, void *);
- void (*err_handler) (int, void *, int errcode);
- void *data;
- unsigned int dma_mode;
- struct scatterlist *sg;
- unsigned int sgbc;
- unsigned int sgcount;
- unsigned int resbytes;
- int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST 1
-#define IMX_DMA_ERR_REQUEST 2
-#define IMX_DMA_ERR_TRANSFER 4
-#define IMX_DMA_ERR_BUFFER 8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-#define DMA_MODE_READ 0
-#define DMA_MODE_WRITE 1
-#define DMA_MODE_MASK 1
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
- unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
- void (*irq_handler) (int, void *),
- void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif /* _ASM_ARCH_IMX_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
deleted file mode 100644
index 490297f..0000000
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ /dev/null
@@ -1,376 +0,0 @@
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- * Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- * Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART (1<<22)
-#define CSCR_MPLL_RESTART (1<<21)
-#define CSCR_SYSTEM_SEL (1<<16)
-#define CSCR_BCLK_DIV (0xf<<10)
-#define CSCR_MPU_PRESC (1<<15)
-#define CSCR_SPEN (1<<1)
-#define CSCR_MPEN (1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- * GPIO Module and I/O Multiplexer
- * x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX 3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT (1<<7)
-#define GPIO_IN (0<<7)
-#define GPIO_PUEN (1<<8)
-
-#define GPIO_PF (0<<9)
-#define GPIO_AF (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN (0<<10)
-#define GPIO_BIN (1<<10)
-#define GPIO_CIN (2<<10)
-#define GPIO_DR (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0 (2<<12)
-#define GPIO_AOUT_1 (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT (0<<14)
-#define GPIO_BOUT_ISR (1<<14)
-#define GPIO_BOUT_0 (2<<14)
-#define GPIO_BOUT_1 (3<<14)
-
-#define GPIO_GIUS (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 )
-#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 )
-#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */
-#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */
-#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */
-#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */
-
-#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */
-#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */
-#define PWMC_SWR (0x01<<16) /* Software Reset */
-#define PWMC_CLKSRC (0x01<<15) /* Clock Source */
-#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */
-#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */
-#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */
-#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */
-#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */
-#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
-#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */
-
-#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
-#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
-#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
-
-/*
- * DMA Controller
- */
-#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
-#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */
-#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */
-#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */
-#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */
-#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */
-#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */
-#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */
-#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */
-#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */
-#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */
-#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */
-#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */
-#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */
-#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
-#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
-#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
-#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */
-
-#define DCR_DRST (1<<1)
-#define DCR_DEN (1<<0)
-#define DBTOCR_EN (1<<15)
-#define DBTOCR_CNT(x) ((x) & 0x7fff )
-#define CNTR_CNT(x) ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR ( 0x0 << 12 )
-#define CCR_DMOD_2D ( 0x1 << 12 )
-#define CCR_DMOD_FIFO ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR ( 0x0 << 10 )
-#define CCR_SMOD_2D ( 0x1 << 10 )
-#define CCR_SMOD_FIFO ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO ( 0x3 << 10 )
-#define CCR_MDIR_DEC (1<<9)
-#define CCR_MSEL_B (1<<8)
-#define CCR_DSIZ_32 ( 0x0 << 6 )
-#define CCR_DSIZ_8 ( 0x1 << 6 )
-#define CCR_DSIZ_16 ( 0x2 << 6 )
-#define CCR_SSIZ_32 ( 0x0 << 4 )
-#define CCR_SSIZ_8 ( 0x1 << 4 )
-#define CCR_SSIZ_16 ( 0x2 << 4 )
-#define CCR_REN (1<<3)
-#define CCR_RPT (1<<2)
-#define CCR_FRC (1<<1)
-#define CCR_CEN (1<<0)
-#define RTOR_EN (1<<15)
-#define RTOR_CLK (1<<14)
-#define RTOR_PSC (1<<13)
-
-/*
- * Interrupt controller
- */
-
-#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD (1<<19)
-#define INTCNTL_NIAD (1<<20)
-
-#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14)
-
-/*
- * General purpose timers
- */
-#define IMX_TCTL(x) __REG( 0x00 + (x))
-#define TCTL_SWR (1<<15)
-#define TCTL_FRR (1<<8)
-#define TCTL_CAP_RIS (1<<6)
-#define TCTL_CAP_FAL (2<<6)
-#define TCTL_CAP_RIS_FAL (3<<6)
-#define TCTL_OM (1<<5)
-#define TCTL_IRQEN (1<<4)
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_16 (2<<1)
-#define TCTL_CLK_TIN (3<<1)
-#define TCTL_CLK_32 (4<<1)
-#define TCTL_TEN (1<<0)
-
-#define IMX_TPRER(x) __REG( 0x04 + (x))
-#define IMX_TCMP(x) __REG( 0x08 + (x))
-#define IMX_TCR(x) __REG( 0x0C + (x))
-#define IMX_TCN(x) __REG( 0x10 + (x))
-#define IMX_TSTAT(x) __REG( 0x14 + (x))
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-#endif // _IMX_REGS_H
diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
deleted file mode 100644
index d54eb1d..0000000
--- a/arch/arm/mach-imx/include/mach/imx-uart.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
- int (*init)(struct platform_device *pdev);
- void (*exit)(struct platform_device *pdev);
- unsigned int flags;
-};
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-imx/include/mach/io.h
deleted file mode 100644
index 9e197ae..0000000
--- a/arch/arm/mach-imx/include/mach/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-imxads/include/mach/io.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
deleted file mode 100644
index 67812c5a..0000000
--- a/arch/arm/mach-imx/include/mach/irqs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * arch/arm/mach-imxads/include/mach/irqs.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <mach/hardware.h>
-
-/*
- * IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT 0
-#define CSI_INT 6
-#define DSPA_MAC_INT 7
-#define DSPA_INT 8
-#define COMP_INT 9
-#define MSHC_XINT 10
-#define GPIO_INT_PORTA 11
-#define GPIO_INT_PORTB 12
-#define GPIO_INT_PORTC 13
-#define LCDC_INT 14
-#define SIM_INT 15
-#define SIM_DATA_INT 16
-#define RTC_INT 17
-#define RTC_SAMINT 18
-#define UART2_MINT_PFERR 19
-#define UART2_MINT_RTS 20
-#define UART2_MINT_DTR 21
-#define UART2_MINT_UARTC 22
-#define UART2_MINT_TX 23
-#define UART2_MINT_RX 24
-#define UART1_MINT_PFERR 25
-#define UART1_MINT_RTS 26
-#define UART1_MINT_DTR 27
-#define UART1_MINT_UARTC 28
-#define UART1_MINT_TX 29
-#define UART1_MINT_RX 30
-#define VOICE_DAC_INT 31
-#define VOICE_ADC_INT 32
-#define PEN_DATA_INT 33
-#define PWM_INT 34
-#define SDHC_INT 35
-#define I2C_INT 39
-#define CSPI_INT 41
-#define SSI_TX_INT 42
-#define SSI_TX_ERR_INT 43
-#define SSI_RX_INT 44
-#define SSI_RX_ERR_INT 45
-#define TOUCH_INT 46
-#define USBD_INT0 47
-#define USBD_INT1 48
-#define USBD_INT2 49
-#define USBD_INT3 50
-#define USBD_INT4 51
-#define USBD_INT5 52
-#define USBD_INT6 53
-#define BTSYS_INT 55
-#define BTTIM_INT 56
-#define BTWUI_INT 57
-#define TIM2_INT 58
-#define TIM1_INT 59
-#define DMA_ERR 60
-#define DMA_INT 61
-#define GPIO_INT_PORTD 62
-
-#define IMX_IRQS (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- * the following pins are connected to the outside
- * world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- * - mapping the interrupts without holes would get
- * far more complicated
- * - Motorola could well decide to bring some processor
- * with more pins connected
- */
-
-#define IRQ_GPIOA(x) (IMX_IRQS + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START 0
-/* switch betwean IRQ and FIQ */
-extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h
deleted file mode 100644
index a93df7c..0000000
--- a/arch/arm/mach-imx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/memory.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET UL(0x08000000)
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
deleted file mode 100644
index 4712f35..0000000
--- a/arch/arm/mach-imx/include/mach/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
- int (*card_present)(struct device *);
- int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
deleted file mode 100644
index def05d5..0000000
--- a/arch/arm/mach-imx/include/mach/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS 0x10000000
-#define MX1ADS_FLASH_SIZE (16*1024*1024)
-
-#define IMX_FB_PHYS (0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
deleted file mode 100644
index 4186430..0000000
--- a/arch/arm/mach-imx/include/mach/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- * Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- * linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- * SPI slaves, and are numbered from zero to num_chipselects - 1.
- * each slave has a chipselect signal, but it's common that not
- * every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
- u8 num_chipselect;
- u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- * sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- * dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- * I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
- u8 enable_loopback:1;
- u8 enable_dma:1;
- u8 ins_ss_pulse:1;
- u16 bclk_wait:15;
- void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT (1 << 0)
-#define SPI_CS_DEASSERT (1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
deleted file mode 100644
index 46d4ca9..0000000
--- a/arch/arm/mach-imx/include/mach/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/arm/mach-imxads/include/mach/system.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void
-arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-static inline void
-arch_reset(char mode, const char *cmd)
-{
- cpu_reset(0);
-}
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-imx/include/mach/timex.h
deleted file mode 100644
index e22ba78..0000000
--- a/arch/arm/mach-imx/include/mach/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/imx/timex.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE (16000000)
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
deleted file mode 100644
index 70523e67..0000000
--- a/arch/arm/mach-imx/include/mach/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/arm/mach-imxads/include/mach/uncompress.h
- *
- *
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR 0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
- unsigned long serial_port;
-
- do {
- serial_port = UART1_BASE;
- if ( UART(UCR1) & UCR1_UARTEN )
- break;
- serial_port = UART2_BASE;
- if ( UART(UCR1) & UCR1_UARTEN )
- break;
- return;
- } while(0);
-
- while (!(UART(USR2) & USR2_TXFE))
- barrier();
-
- UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
deleted file mode 100644
index 531b95d..0000000
--- a/arch/arm/mach-imx/irq.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/irq.c
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * 03/03/2004 Sascha Hauer <sascha@saschahauer.de>
- * Copied from the motorola bsp package and added gpio demux
- * interrupt handler
- */
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-/*
- *
- * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.
- *
- */
-
-#define INTCNTL_OFF 0x00
-#define NIMASK_OFF 0x04
-#define INTENNUM_OFF 0x08
-#define INTDISNUM_OFF 0x0C
-#define INTENABLEH_OFF 0x10
-#define INTENABLEL_OFF 0x14
-#define INTTYPEH_OFF 0x18
-#define INTTYPEL_OFF 0x1C
-#define NIPRIORITY_OFF(x) (0x20+4*(7-(x)))
-#define NIVECSR_OFF 0x40
-#define FIVECSR_OFF 0x44
-#define INTSRCH_OFF 0x48
-#define INTSRCL_OFF 0x4C
-#define INTFRCH_OFF 0x50
-#define INTFRCL_OFF 0x54
-#define NIPNDH_OFF 0x58
-#define NIPNDL_OFF 0x5C
-#define FIPNDH_OFF 0x60
-#define FIPNDL_OFF 0x64
-
-#define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTCNTL (VA_AITC_BASE + INTCNTL_OFF)
-#define IMX_AITC_NIMASK (VA_AITC_BASE + NIMASK_OFF)
-#define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF)
-#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF)
-#define IMX_AITC_INTENABLEH (VA_AITC_BASE + INTENABLEH_OFF)
-#define IMX_AITC_INTENABLEL (VA_AITC_BASE + INTENABLEL_OFF)
-#define IMX_AITC_INTTYPEH (VA_AITC_BASE + INTTYPEH_OFF)
-#define IMX_AITC_INTTYPEL (VA_AITC_BASE + INTTYPEL_OFF)
-#define IMX_AITC_NIPRIORITY(x) (VA_AITC_BASE + NIPRIORITY_OFF(x))
-#define IMX_AITC_NIVECSR (VA_AITC_BASE + NIVECSR_OFF)
-#define IMX_AITC_FIVECSR (VA_AITC_BASE + FIVECSR_OFF)
-#define IMX_AITC_INTSRCH (VA_AITC_BASE + INTSRCH_OFF)
-#define IMX_AITC_INTSRCL (VA_AITC_BASE + INTSRCL_OFF)
-#define IMX_AITC_INTFRCH (VA_AITC_BASE + INTFRCH_OFF)
-#define IMX_AITC_INTFRCL (VA_AITC_BASE + INTFRCL_OFF)
-#define IMX_AITC_NIPNDH (VA_AITC_BASE + NIPNDH_OFF)
-#define IMX_AITC_NIPNDL (VA_AITC_BASE + NIPNDL_OFF)
-#define IMX_AITC_FIPNDH (VA_AITC_BASE + FIPNDH_OFF)
-#define IMX_AITC_FIPNDL (VA_AITC_BASE + FIPNDL_OFF)
-
-#if 0
-#define DEBUG_IRQ(fmt...) printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...) do { } while (0)
-#endif
-
-static void
-imx_mask_irq(unsigned int irq)
-{
- __raw_writel(irq, IMX_AITC_INTDISNUM);
-}
-
-static void
-imx_unmask_irq(unsigned int irq)
-{
- __raw_writel(irq, IMX_AITC_INTENNUM);
-}
-
-#ifdef CONFIG_FIQ
-int imx_set_irq_fiq(unsigned int irq, unsigned int type)
-{
- unsigned int irqt;
-
- if (irq >= IMX_IRQS)
- return -EINVAL;
-
- if (irq < IMX_IRQS / 2) {
- irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
- } else {
- irq -= IMX_IRQS / 2;
- irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(imx_set_irq_fiq);
-#endif /* CONFIG_FIQ */
-
-static int
-imx_gpio_irq_type(unsigned int _irq, unsigned int type)
-{
- unsigned int irq_type = 0, irq, reg, bit;
-
- irq = _irq - IRQ_GPIOA(0);
- reg = irq >> 5;
- bit = 1 << (irq % 32);
-
- if (type == IRQ_TYPE_PROBE) {
- /* Don't mess with enabled GPIOs using preconfigured edges or
- GPIOs set to alternate function during probe */
- /* TODO: support probe */
-// if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
-// GPIO_bit(gpio))
-// return 0;
-// if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-// return 0;
-// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- GIUS(reg) |= bit;
- DDIR(reg) &= ~(bit);
-
- DEBUG_IRQ("setting type of irq %d to ", _irq);
-
- if (type & IRQ_TYPE_EDGE_RISING) {
- DEBUG_IRQ("rising edges\n");
- irq_type = 0x0;
- }
- if (type & IRQ_TYPE_EDGE_FALLING) {
- DEBUG_IRQ("falling edges\n");
- irq_type = 0x1;
- }
- if (type & IRQ_TYPE_LEVEL_LOW) {
- DEBUG_IRQ("low level\n");
- irq_type = 0x3;
- }
- if (type & IRQ_TYPE_LEVEL_HIGH) {
- DEBUG_IRQ("high level\n");
- irq_type = 0x2;
- }
-
- if (irq % 32 < 16) {
- ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
- (irq_type << ((irq % 16) * 2));
- } else {
- ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
- (irq_type << ((irq % 16) * 2));
- }
-
- return 0;
-
-}
-
-static void
-imx_gpio_ack_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_mask_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
-}
-
-static void
-imx_gpio_unmask_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_handler(unsigned int mask, unsigned int irq,
- struct irq_desc *desc)
-{
- while (mask) {
- if (mask & 1) {
- DEBUG_IRQ("handling irq %d\n", irq);
- generic_handle_irq(irq);
- }
- irq++;
- mask >>= 1;
- }
-}
-
-static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(0);
- irq = IRQ_GPIOA(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(1);
- irq = IRQ_GPIOB(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(2);
- irq = IRQ_GPIOC(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(3);
- irq = IRQ_GPIOD(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static struct irq_chip imx_internal_chip = {
- .name = "MPU",
- .ack = imx_mask_irq,
- .mask = imx_mask_irq,
- .unmask = imx_unmask_irq,
-};
-
-static struct irq_chip imx_gpio_chip = {
- .name = "GPIO",
- .ack = imx_gpio_ack_irq,
- .mask = imx_gpio_mask_irq,
- .unmask = imx_gpio_unmask_irq,
- .set_type = imx_gpio_irq_type,
-};
-
-void __init
-imx_init_irq(void)
-{
- unsigned int irq;
-
- DEBUG_IRQ("Initializing imx interrupts\n");
-
- /* Disable all interrupts initially. */
- /* Do not rely on the bootloader. */
- __raw_writel(0, IMX_AITC_INTENABLEH);
- __raw_writel(0, IMX_AITC_INTENABLEL);
-
- /* Mask all GPIO interrupts as well */
- IMR(0) = 0;
- IMR(1) = 0;
- IMR(2) = 0;
- IMR(3) = 0;
-
- for (irq = 0; irq < IMX_IRQS; irq++) {
- set_irq_chip(irq, &imx_internal_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
- set_irq_chip(irq, &imx_gpio_chip);
- set_irq_handler(irq, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
-
- /* Release masking of interrupts according to priority */
- __raw_writel(-1, IMX_AITC_NIMASK);
-
-#ifdef CONFIG_FIQ
- /* Initialize FIQ */
- init_FIQ();
-#endif
-}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
deleted file mode 100644
index 1d48f27..0000000
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds-mx1ads.c
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include "leds.h"
-
-/*
- * The MX1ADS Board has only one usable LED,
- * so select only the timer led or the
- * cpu usage led
- */
-void
-mx1ads_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (ledevt) {
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- DR(0) &= ~(1<<2);
- break;
-
- case led_idle_end:
- DR(0) |= 1<<2;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- DR(0) ^= 1<<2;
-#endif
- default:
- break;
- }
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c
deleted file mode 100644
index cf30803..0000000
--- a/arch/arm/mach-imx/leds.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds.c
- *
- * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-leds_init(void)
-{
- if (machine_is_mx1ads()) {
- leds_event = mx1ads_leds_event;
- }
-
- return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h
deleted file mode 100644
index 49dc1c1..0000000
--- a/arch/arm/mach-imx/leds.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-imx/leds.h
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * blinky lights for IMX-based systems
- *
- */
-extern void mx1ads_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
deleted file mode 100644
index 87fa1ff..0000000
--- a/arch/arm/mach-imx/mx1ads.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-#include <linux/interrupt.h>
-#include "generic.h"
-
-static struct resource cs89x0_resources[] = {
- [0] = {
- .start = IMX_CS4_PHYS + 0x300,
- .end = IMX_CS4_PHYS + 0x300 + 16,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_GPIOC(17),
- .end = IRQ_GPIOC(17),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cs89x0_device = {
- .name = "cirrus-cs89x0",
- .num_resources = ARRAY_SIZE(cs89x0_resources),
- .resource = cs89x0_resources,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
- [0] = {
- .start = 0x00206000,
- .end = 0x002060FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART1_MINT_RX),
- .end = (UART1_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART1_MINT_TX),
- .end = (UART1_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = UART1_MINT_RTS,
- .end = UART1_MINT_RTS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart1_device = {
- .name = "imx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_uart1_resources),
- .resource = imx_uart1_resources,
- .dev = {
- .platform_data = &uart_pdata,
- }
-};
-
-static struct resource imx_uart2_resources[] = {
- [0] = {
- .start = 0x00207000,
- .end = 0x002070FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART2_MINT_RX),
- .end = (UART2_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART2_MINT_TX),
- .end = (UART2_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = UART2_MINT_RTS,
- .end = UART2_MINT_RTS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart2_device = {
- .name = "imx-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(imx_uart2_resources),
- .resource = imx_uart2_resources,
- .dev = {
- .platform_data = &uart_pdata,
- }
-};
-
-static struct platform_device *devices[] __initdata = {
- &cs89x0_device,
- &imx_uart1_device,
- &imx_uart2_device,
-};
-
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-static int mx1ads_mmc_card_present(struct device *dev)
-{
- /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
- return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
- .card_present = mx1ads_mmc_card_present,
-};
-#endif
-
-static void __init
-mx1ads_init(void)
-{
-#ifdef CONFIG_LEDS
- imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
-#endif
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
- /* SD/MMC card detect */
- imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
- imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
- imx_gpio_mode(PC9_PF_UART1_CTS);
- imx_gpio_mode(PC10_PF_UART1_RTS);
- imx_gpio_mode(PC11_PF_UART1_TXD);
- imx_gpio_mode(PC12_PF_UART1_RXD);
-
- imx_gpio_mode(PB28_PF_UART2_CTS);
- imx_gpio_mode(PB29_PF_UART2_RTS);
- imx_gpio_mode(PB30_PF_UART2_TXD);
- imx_gpio_mode(PB31_PF_UART2_RXD);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init
-mx1ads_map_io(void)
-{
- imx_map_io();
-}
-
-MACHINE_START(MX1ADS, "Motorola MX1ADS")
- /* Maintainer: Sascha Hauer, Pengutronix */
- .phys_io = 0x00200000,
- .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc,
- .boot_params = 0x08000100,
- .map_io = mx1ads_map_io,
- .init_irq = imx_init_irq,
- .timer = &imx_timer,
- .init_machine = mx1ads_init,
-MACHINE_END
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
deleted file mode 100644
index 5aef18b..0000000
--- a/arch/arm/mach-imx/time.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/time.c
- *
- * Copyright (C) 2000-2001 Deep Blue Solutions
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-/* Use timer 1 as system timer */
-#define TIMER_BASE IMX_TIM1_BASE
-
-static struct clock_event_device clockevent_imx;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-imx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &clockevent_imx;
- uint32_t tstat;
- irqreturn_t ret = IRQ_NONE;
-
- /* clear the interrupt */
- tstat = IMX_TSTAT(TIMER_BASE);
- IMX_TSTAT(TIMER_BASE) = 0;
-
- if (tstat & TSTAT_COMP) {
- evt->event_handler(evt);
- ret = IRQ_HANDLED;
- }
-
- return ret;
-}
-
-static struct irqaction imx_timer_irq = {
- .name = "i.MX Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = imx_timer_interrupt,
-};
-
-/*
- * Set up timer hardware into expected mode and state.
- */
-static void __init imx_timer_hardware_init(void)
-{
- /*
- * Initialise to a known state (all timers off, and timing reset)
- */
- IMX_TCTL(TIMER_BASE) = 0;
- IMX_TPRER(TIMER_BASE) = 0;
-
- IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
-}
-
-cycle_t imx_get_cycles(struct clocksource *cs)
-{
- return IMX_TCN(TIMER_BASE);
-}
-
-static struct clocksource clocksource_imx = {
- .name = "imx_timer1",
- .rating = 200,
- .read = imx_get_cycles,
- .mask = 0xFFFFFFFF,
- .shift = 20,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init imx_clocksource_init(unsigned long rate)
-{
- clocksource_imx.mult =
- clocksource_hz2mult(rate, clocksource_imx.shift);
- clocksource_register(&clocksource_imx);
-
- return 0;
-}
-
-static int imx_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long tcmp;
-
- tcmp = IMX_TCN(TIMER_BASE) + evt;
- IMX_TCMP(TIMER_BASE) = tcmp;
-
- return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[]={
- [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
- [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
- [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
- [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /*DEBUG*/
-
-static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
- unsigned long flags;
-
- /*
- * The timer interrupt generation is disabled at least
- * for enough time to call imx_set_next_event()
- */
- local_irq_save(flags);
- /* Disable interrupt in GPT module */
- IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
- if (mode != clockevent_mode) {
- /* Set event time into far-far future */
- IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
- /* Clear pending interrupt */
- IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
- }
-
-#ifdef DEBUG
- printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
- clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
-#endif /*DEBUG*/
-
- /* Remember timer mode */
- clockevent_mode = mode;
- local_irq_restore(flags);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /*
- * Do not put overhead of interrupt enable/disable into
- * imx_set_next_event(), the core has about 4 minutes
- * to call imx_set_next_event() or shutdown clock after
- * mode switching
- */
- local_irq_save(flags);
- IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
- local_irq_restore(flags);
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_RESUME:
- /* Left event sources disabled, no more interrupts appears */
- break;
- }
-}
-
-static struct clock_event_device clockevent_imx = {
- .name = "imx_timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_mode = imx_set_mode,
- .set_next_event = imx_set_next_event,
- .rating = 200,
-};
-
-static int __init imx_clockevent_init(unsigned long rate)
-{
- clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
- clockevent_imx.shift);
- clockevent_imx.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_imx);
- clockevent_imx.min_delta_ns =
- clockevent_delta2ns(0xf, &clockevent_imx);
-
- clockevent_imx.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_imx);
-
- return 0;
-}
-
-extern int imx_clocks_init(void);
-
-static void __init imx_timer_init(void)
-{
- struct clk *clk;
- unsigned long rate;
-
- imx_clocks_init();
-
- clk = clk_get(NULL, "perclk1");
- clk_enable(clk);
- rate = clk_get_rate(clk);
-
- imx_timer_hardware_init();
- imx_clocksource_init(rate);
-
- imx_clockevent_init(rate);
-
- /*
- * Make irqs happen for the system timer
- */
- setup_irq(TIM1_INT, &imx_timer_irq);
-}
-
-struct sys_timer imx_timer = {
- .init = imx_timer_init,
-};
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 2c5a02b..264f4d5 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -78,6 +78,12 @@
IXDP465 Development Platform (Also known as BMP).
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+config MACH_GORAMO_MLR
+ bool "GORAMO Multi Link Router"
+ help
+ Say 'Y' here if you want your kernel to support GORAMO
+ MultiLink router.
+
config MACH_KIXRP435
bool "KIXRP435"
help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 2e6bbf9..47d1f60 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -30,6 +30,7 @@
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
new file mode 100644
index 0000000..a733b8f
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -0,0 +1,507 @@
+/*
+ * Goramo MultiLink router platform code
+ * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
+ */
+
+#include <linux/delay.h>
+#include <linux/hdlc.h>
+#include <linux/i2c-gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/pci.h>
+
+#define xgpio_irq(n) (IRQ_IXP4XX_GPIO ## n)
+#define gpio_irq(n) xgpio_irq(n)
+
+#define SLOT_ETHA 0x0B /* IDSEL = AD21 */
+#define SLOT_ETHB 0x0C /* IDSEL = AD20 */
+#define SLOT_MPCI 0x0D /* IDSEL = AD19 */
+#define SLOT_NEC 0x0E /* IDSEL = AD18 */
+
+#define IRQ_ETHA IRQ_IXP4XX_GPIO4
+#define IRQ_ETHB IRQ_IXP4XX_GPIO5
+#define IRQ_NEC IRQ_IXP4XX_GPIO3
+#define IRQ_MPCI IRQ_IXP4XX_GPIO12
+
+/* GPIO lines */
+#define GPIO_SCL 0
+#define GPIO_SDA 1
+#define GPIO_STR 2
+#define GPIO_HSS0_DCD_N 6
+#define GPIO_HSS1_DCD_N 7
+#define GPIO_HSS0_CTS_N 10
+#define GPIO_HSS1_CTS_N 11
+#define GPIO_HSS1_RTS_N 13
+#define GPIO_HSS0_RTS_N 14
+
+/* Control outputs from 74HC4094 */
+#define CONTROL_HSS0_CLK_INT 0
+#define CONTROL_HSS1_CLK_INT 1
+#define CONTROL_HSS0_DTR_N 2
+#define CONTROL_HSS1_DTR_N 3
+#define CONTROL_EXT 4
+#define CONTROL_AUTO_RESET 5
+#define CONTROL_PCI_RESET_N 6
+#define CONTROL_EEPROM_WC_N 7
+
+/* offsets from start of flash ROM = 0x50000000 */
+#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */
+#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */
+#define CFG_REV 0x4C /* u32 */
+#define CFG_SDRAM_SIZE 0x50 /* u32 */
+#define CFG_SDRAM_CONF 0x54 /* u32 */
+#define CFG_SDRAM_MODE 0x58 /* u32 */
+#define CFG_SDRAM_REFRESH 0x5C /* u32 */
+
+#define CFG_HW_BITS 0x60 /* u32 */
+#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
+#define CFG_HW_HAS_PCI_SLOT 0x00000008
+#define CFG_HW_HAS_ETH0 0x00000010
+#define CFG_HW_HAS_ETH1 0x00000020
+#define CFG_HW_HAS_HSS0 0x00000040
+#define CFG_HW_HAS_HSS1 0x00000080
+#define CFG_HW_HAS_UART0 0x00000100
+#define CFG_HW_HAS_UART1 0x00000200
+#define CFG_HW_HAS_EEPROM 0x00000400
+
+#define FLASH_CMD_READ_ARRAY 0xFF
+#define FLASH_CMD_READ_ID 0x90
+#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */
+
+static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */;
+static u8 control_value;
+
+static void set_scl(u8 value)
+{
+ gpio_line_set(GPIO_SCL, !!value);
+ udelay(3);
+}
+
+static void set_sda(u8 value)
+{
+ gpio_line_set(GPIO_SDA, !!value);
+ udelay(3);
+}
+
+static void set_str(u8 value)
+{
+ gpio_line_set(GPIO_STR, !!value);
+ udelay(3);
+}
+
+static inline void set_control(int line, int value)
+{
+ if (value)
+ control_value |= (1 << line);
+ else
+ control_value &= ~(1 << line);
+}
+
+
+static void output_control(void)
+{
+ int i;
+
+ gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+
+ for (i = 0; i < 8; i++) {
+ set_scl(0);
+ set_sda(control_value & (0x80 >> i)); /* MSB first */
+ set_scl(1); /* active edge */
+ }
+
+ set_str(1);
+ set_str(0);
+
+ set_scl(0);
+ set_sda(1); /* Be ready for START */
+ set_scl(1);
+}
+
+
+static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
+
+static int hss_set_clock(int port, unsigned int clock_type)
+{
+ int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
+
+ switch (clock_type) {
+ case CLOCK_DEFAULT:
+ case CLOCK_EXT:
+ set_control(ctrl_int, 0);
+ output_control();
+ return CLOCK_EXT;
+
+ case CLOCK_INT:
+ set_control(ctrl_int, 1);
+ output_control();
+ return CLOCK_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static irqreturn_t hss_dcd_irq(int irq, void *pdev)
+{
+ int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N));
+ gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+ set_carrier_cb_tab[port](pdev, !i);
+ return IRQ_HANDLED;
+}
+
+
+static int hss_open(int port, void *pdev,
+ void (*set_carrier_cb)(void *pdev, int carrier))
+{
+ int i, irq;
+
+ if (!port)
+ irq = gpio_irq(GPIO_HSS0_DCD_N);
+ else
+ irq = gpio_irq(GPIO_HSS1_DCD_N);
+
+ gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+ set_carrier_cb(pdev, !i);
+
+ set_carrier_cb_tab[!!port] = set_carrier_cb;
+
+ if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
+ printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
+ irq, i);
+ return i;
+ }
+
+ set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
+ output_control();
+ gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+ return 0;
+}
+
+static void hss_close(int port, void *pdev)
+{
+ free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N),
+ pdev);
+ set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
+
+ set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
+ output_control();
+ gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+}
+
+
+/* Flash memory */
+static struct flash_platform_data flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device device_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = { .platform_data = &flash_data },
+ .num_resources = 1,
+ .resource = &flash_resource,
+};
+
+
+/* I^2C interface */
+static struct i2c_gpio_platform_data i2c_data = {
+ .sda_pin = GPIO_SDA,
+ .scl_pin = GPIO_SCL,
+};
+
+static struct platform_device device_i2c = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = { .platform_data = &i2c_data },
+};
+
+
+/* IXP425 2 UART ports */
+static struct resource uart_resources[] = {
+ {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct plat_serial8250_port uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT +
+ REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT +
+ REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device device_uarts = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = uart_data,
+ .num_resources = 2,
+ .resource = uart_resources,
+};
+
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info eth_plat[] = {
+ {
+ .phy = 0,
+ .rxq = 3,
+ .txreadyq = 32,
+ }, {
+ .phy = 1,
+ .rxq = 4,
+ .txreadyq = 33,
+ }
+};
+
+static struct platform_device device_eth_tab[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = eth_plat,
+ }, {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev.platform_data = eth_plat + 1,
+ }
+};
+
+
+/* IXP425 2 synchronous serial ports */
+static struct hss_plat_info hss_plat[] = {
+ {
+ .set_clock = hss_set_clock,
+ .open = hss_open,
+ .close = hss_close,
+ .txreadyq = 34,
+ }, {
+ .set_clock = hss_set_clock,
+ .open = hss_open,
+ .close = hss_close,
+ .txreadyq = 35,
+ }
+};
+
+static struct platform_device device_hss_tab[] = {
+ {
+ .name = "ixp4xx_hss",
+ .id = 0,
+ .dev.platform_data = hss_plat,
+ }, {
+ .name = "ixp4xx_hss",
+ .id = 1,
+ .dev.platform_data = hss_plat + 1,
+ }
+};
+
+
+static struct platform_device *device_tab[6] __initdata = {
+ &device_flash, /* index 0 */
+};
+
+static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+ return __raw_readb(flash + addr);
+#else
+ return __raw_readb(flash + (addr ^ 3));
+#endif
+}
+
+static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+ return __raw_readw(flash + addr);
+#else
+ return __raw_readw(flash + (addr ^ 2));
+#endif
+}
+
+static void __init gmlr_init(void)
+{
+ u8 __iomem *flash;
+ int i, devices = 1; /* flash */
+
+ ixp4xx_sys_init();
+
+ if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
+ printk(KERN_ERR "goramo-mlr: unable to access system"
+ " configuration data\n");
+ else {
+ system_rev = __raw_readl(flash + CFG_REV);
+ hw_bits = __raw_readl(flash + CFG_HW_BITS);
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ eth_plat[0].hwaddr[i] =
+ flash_readb(flash, CFG_ETH0_ADDRESS + i);
+ eth_plat[1].hwaddr[i] =
+ flash_readb(flash, CFG_ETH1_ADDRESS + i);
+ }
+
+ __raw_writew(FLASH_CMD_READ_ID, flash);
+ system_serial_high = flash_readw(flash, FLASH_SER_OFF);
+ system_serial_high <<= 16;
+ system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
+ system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
+ system_serial_low <<= 16;
+ system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
+ __raw_writew(FLASH_CMD_READ_ARRAY, flash);
+
+ iounmap(flash);
+ }
+
+ switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
+ case CFG_HW_HAS_UART0:
+ memset(&uart_data[1], 0, sizeof(uart_data[1]));
+ device_uarts.num_resources = 1;
+ break;
+
+ case CFG_HW_HAS_UART1:
+ device_uarts.dev.platform_data = &uart_data[1];
+ device_uarts.resource = &uart_resources[1];
+ device_uarts.num_resources = 1;
+ break;
+ }
+ if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
+ device_tab[devices++] = &device_uarts; /* max index 1 */
+
+ if (hw_bits & CFG_HW_HAS_ETH0)
+ device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
+ if (hw_bits & CFG_HW_HAS_ETH1)
+ device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
+
+ if (hw_bits & CFG_HW_HAS_HSS0)
+ device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
+ if (hw_bits & CFG_HW_HAS_HSS1)
+ device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+
+ if (hw_bits & CFG_HW_HAS_EEPROM)
+ device_tab[devices++] = &device_i2c; /* max index 6 */
+
+ gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
+ gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+ set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
+ set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
+
+ set_control(CONTROL_HSS0_DTR_N, 1);
+ set_control(CONTROL_HSS1_DTR_N, 1);
+ set_control(CONTROL_EEPROM_WC_N, 1);
+ set_control(CONTROL_PCI_RESET_N, 1);
+ output_control();
+
+ msleep(1); /* Wait for PCI devices to initialize */
+
+ flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+ platform_add_devices(device_tab, devices);
+}
+
+
+#ifdef CONFIG_PCI
+static void __init gmlr_pci_preinit(void)
+{
+ set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW);
+ ixp4xx_pci_preinit();
+}
+
+static void __init gmlr_pci_postinit(void)
+{
+ if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
+ (hw_bits & CFG_HW_USB_PORTS) < 5) {
+ /* need to adjust number of USB ports on NEC chip */
+ u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
+ if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
+ value &= ~7;
+ value |= (hw_bits & CFG_HW_USB_PORTS);
+ ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
+ }
+ }
+}
+
+static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ switch(slot) {
+ case SLOT_ETHA: return IRQ_ETHA;
+ case SLOT_ETHB: return IRQ_ETHB;
+ case SLOT_NEC: return IRQ_NEC;
+ default: return IRQ_MPCI;
+ }
+}
+
+static struct hw_pci gmlr_hw_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = gmlr_pci_preinit,
+ .postinit = gmlr_pci_postinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = gmlr_map_irq,
+};
+
+static int __init gmlr_pci_init(void)
+{
+ if (machine_is_goramo_mlr() &&
+ (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
+ pci_common_init(&gmlr_hw_pci);
+ return 0;
+}
+
+subsys_initcall(gmlr_pci_init);
+#endif /* CONFIG_PCI */
+
+
+MACHINE_START(GORAMO_MLR, "MultiLink")
+ /* Maintainer: Krzysztof Halasa */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = gmlr_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index def7773..b2ef65d 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -26,6 +26,8 @@
#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */
#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0
+#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
+ IXP42X_PROCESSOR_ID_VALUE)
#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
IXP42X_PROCESSOR_ID_VALUE)
#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
@@ -35,8 +37,11 @@
static inline u32 ixp4xx_read_feature_bits(void)
{
- unsigned int val = ~*IXP4XX_EXP_CFG2;
+ u32 val = ~*IXP4XX_EXP_CFG2;
+ if (cpu_is_ixp42x_rev_a0())
+ return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+ IXP4XX_FEATURE_AES);
if (cpu_is_ixp42x())
return val & IXP42X_FEATURE_MASK;
if (cpu_is_ixp43x())
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 0cbe6ce..9e7cad2 100644
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -15,7 +15,7 @@
#define DEBUG_QMGR 0
#define HALF_QUEUES 32
-#define QUEUES 64 /* only 32 lower queues currently supported */
+#define QUEUES 64
#define MAX_QUEUE_LENGTH 4 /* in dwords */
#define QUEUE_STAT1_EMPTY 1 /* queue status bits */
@@ -110,48 +110,95 @@
return val;
}
-static inline int qmgr_get_stat1(unsigned int queue)
+static inline int __qmgr_get_stat1(unsigned int queue)
{
extern struct qmgr_regs __iomem *qmgr_regs;
return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
>> ((queue & 7) << 2)) & 0xF;
}
-static inline int qmgr_get_stat2(unsigned int queue)
+static inline int __qmgr_get_stat2(unsigned int queue)
{
extern struct qmgr_regs __iomem *qmgr_regs;
+ BUG_ON(queue >= HALF_QUEUES);
return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
>> ((queue & 0xF) << 1)) & 0x3;
}
+/**
+ * qmgr_stat_empty() - checks if a hardware queue is empty
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is empty.
+ */
static inline int qmgr_stat_empty(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+ BUG_ON(queue >= HALF_QUEUES);
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
}
-static inline int qmgr_stat_nearly_empty(unsigned int queue)
+/**
+ * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is below low watermark.
+ */
+static inline int qmgr_stat_below_low_watermark(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+ extern struct qmgr_regs __iomem *qmgr_regs;
+ if (queue >= HALF_QUEUES)
+ return (__raw_readl(&qmgr_regs->statne_h) >>
+ (queue - HALF_QUEUES)) & 0x01;
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
}
-static inline int qmgr_stat_nearly_full(unsigned int queue)
+/**
+ * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is above high watermark
+ */
+static inline int qmgr_stat_above_high_watermark(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+ BUG_ON(queue >= HALF_QUEUES);
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
}
+/**
+ * qmgr_stat_full() - checks if a hardware queue is full
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is full.
+ */
static inline int qmgr_stat_full(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+ extern struct qmgr_regs __iomem *qmgr_regs;
+ if (queue >= HALF_QUEUES)
+ return (__raw_readl(&qmgr_regs->statf_h) >>
+ (queue - HALF_QUEUES)) & 0x01;
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
}
+/**
+ * qmgr_stat_underflow() - checks if a hardware queue experienced underflow
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue experienced underflow.
+ */
static inline int qmgr_stat_underflow(unsigned int queue)
{
- return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+ return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
}
+/**
+ * qmgr_stat_overflow() - checks if a hardware queue experienced overflow
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue experienced overflow.
+ */
static inline int qmgr_stat_overflow(unsigned int queue)
{
- return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+ return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
}
#endif
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 7bb8e77..47ac69c 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -386,15 +386,6 @@
/* reset the NPE */
ixp4xx_write_feature_bits(val &
~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
- for (i = 0; i < MAX_RETRIES; i++) {
- if (!(ixp4xx_read_feature_bits() &
- (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
- break; /* reset completed */
- udelay(1);
- }
- if (i == MAX_RETRIES)
- return -ETIMEDOUT;
-
/* deassert reset */
ixp4xx_write_feature_bits(val |
(IXP4XX_FEATURE_RESET_NPEA << npe->id));
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index bfddc73..bfdbe4b 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -18,8 +18,8 @@
static struct resource *mem_res;
static spinlock_t qmgr_lock;
static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-static void *irq_pdevs[HALF_QUEUES];
+static void (*irq_handlers[QUEUES])(void *pdev);
+static void *irq_pdevs[QUEUES];
#if DEBUG_QMGR
char qmgr_queue_descs[QUEUES][32];
@@ -28,51 +28,112 @@
void qmgr_set_irq(unsigned int queue, int src,
void (*handler)(void *pdev), void *pdev)
{
- u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
- int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
unsigned long flags;
- src &= 7;
spin_lock_irqsave(&qmgr_lock, flags);
- __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+ if (queue < HALF_QUEUES) {
+ u32 __iomem *reg;
+ int bit;
+ BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL);
+ reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */
+ bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+ __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit),
+ reg);
+ } else
+ /* IRQ source for queues 32-63 is fixed */
+ BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY);
+
irq_handlers[queue] = handler;
irq_pdevs[queue] = pdev;
spin_unlock_irqrestore(&qmgr_lock, flags);
}
-static irqreturn_t qmgr_irq1(int irq, void *pdev)
+static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
{
- int i;
- u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
- __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
+ int i, ret = 0;
+ u32 en_bitmap, src, stat;
- for (i = 0; i < HALF_QUEUES; i++)
- if (val & (1 << i))
+ /* ACK - it may clear any bits so don't rely on it */
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
+
+ en_bitmap = qmgr_regs->irqen[0];
+ while (en_bitmap) {
+ i = __fls(en_bitmap); /* number of the last "low" queue */
+ en_bitmap &= ~BIT(i);
+ src = qmgr_regs->irqsrc[i >> 3];
+ stat = qmgr_regs->stat1[i >> 3];
+ if (src & 4) /* the IRQ condition is inverted */
+ stat = ~stat;
+ if (stat & BIT(src & 3)) {
irq_handlers[i](irq_pdevs[i]);
+ ret = IRQ_HANDLED;
+ }
+ }
+ return ret;
+}
- return val ? IRQ_HANDLED : 0;
+
+static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
+{
+ int i, ret = 0;
+ u32 req_bitmap;
+
+ /* ACK - it may clear any bits so don't rely on it */
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
+
+ req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
+ while (req_bitmap) {
+ i = __fls(req_bitmap); /* number of the last "high" queue */
+ req_bitmap &= ~BIT(i);
+ irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
+ ret = IRQ_HANDLED;
+ }
+ return ret;
+}
+
+
+static irqreturn_t qmgr_irq(int irq, void *pdev)
+{
+ int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
+ u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
+
+ if (!req_bitmap)
+ return 0;
+ __raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
+
+ while (req_bitmap) {
+ i = __fls(req_bitmap); /* number of the last queue */
+ req_bitmap &= ~BIT(i);
+ i += half * HALF_QUEUES;
+ irq_handlers[i](irq_pdevs[i]);
+ }
+ return IRQ_HANDLED;
}
void qmgr_enable_irq(unsigned int queue)
{
unsigned long flags;
+ int half = queue / 32;
+ u32 mask = 1 << (queue & (HALF_QUEUES - 1));
spin_lock_irqsave(&qmgr_lock, flags);
- __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
- &qmgr_regs->irqen[0]);
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask,
+ &qmgr_regs->irqen[half]);
spin_unlock_irqrestore(&qmgr_lock, flags);
}
void qmgr_disable_irq(unsigned int queue)
{
unsigned long flags;
+ int half = queue / 32;
+ u32 mask = 1 << (queue & (HALF_QUEUES - 1));
spin_lock_irqsave(&qmgr_lock, flags);
- __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
- &qmgr_regs->irqen[0]);
- __raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask,
+ &qmgr_regs->irqen[half]);
+ __raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */
spin_unlock_irqrestore(&qmgr_lock, flags);
}
@@ -98,8 +159,7 @@
u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
int err;
- if (queue >= HALF_QUEUES)
- return -ERANGE;
+ BUG_ON(queue >= QUEUES);
if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
return -EINVAL;
@@ -180,7 +240,7 @@
{
u32 cfg, addr, mask[4];
- BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+ BUG_ON(queue >= QUEUES); /* not in valid range */
spin_lock_irq(&qmgr_lock);
cfg = __raw_readl(&qmgr_regs->sram[queue]);
@@ -224,6 +284,8 @@
static int qmgr_init(void)
{
int i, err;
+ irq_handler_t handler1, handler2;
+
mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
IXP4XX_QMGR_REGION_SIZE,
"IXP4xx Queue Manager");
@@ -247,23 +309,42 @@
__raw_writel(0, &qmgr_regs->irqen[i]);
}
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h);
+ __raw_writel(0, &qmgr_regs->statf_h);
+
for (i = 0; i < QUEUES; i++)
__raw_writel(0, &qmgr_regs->sram[i]);
- err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
- "IXP4xx Queue Manager", NULL);
+ if (cpu_is_ixp42x_rev_a0()) {
+ handler1 = qmgr_irq1_a0;
+ handler2 = qmgr_irq2_a0;
+ } else
+ handler1 = handler2 = qmgr_irq;
+
+ err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager",
+ NULL);
if (err) {
- printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
- IRQ_IXP4XX_QM1);
+ printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+ IRQ_IXP4XX_QM1, err);
goto error_irq;
}
+ err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager",
+ NULL);
+ if (err) {
+ printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+ IRQ_IXP4XX_QM2, err);
+ goto error_irq2;
+ }
+
used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
spin_lock_init(&qmgr_lock);
printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
return 0;
+error_irq2:
+ free_irq(IRQ_IXP4XX_QM1, NULL);
error_irq:
iounmap(qmgr_regs);
error_map:
@@ -274,7 +355,9 @@
static void qmgr_remove(void)
{
free_irq(IRQ_IXP4XX_QM1, NULL);
+ free_irq(IRQ_IXP4XX_QM2, NULL);
synchronize_irq(IRQ_IXP4XX_QM1);
+ synchronize_irq(IRQ_IXP4XX_QM2);
iounmap(qmgr_regs);
release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
}
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 0dec6f3..7622c9b 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -26,6 +26,7 @@
#include <asm/mach/map.h>
+#include <mach/common.h>
#include <mach/hardware.h>
static struct map_desc imx_io_desc[] __initdata = {
@@ -37,7 +38,9 @@
}
};
-void __init mxc_map_io(void)
+void __init mx1_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX1);
+
iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e54057f..e5b0c0a 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -12,77 +12,56 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
+#include <mach/hardware.h>
#include <mach/i2c.h>
+#include <mach/imx-uart.h>
#include <mach/iomux.h>
+#include <mach/irqs.h>
+
#include "devices.h"
-/*
- * UARTs platform data
- */
-static int mxc_uart1_pins[] = {
+static int mx1ads_pins[] = {
+ /* UART1 */
PC9_PF_UART1_CTS,
PC10_PF_UART1_RTS,
PC11_PF_UART1_TXD,
PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = {
+ /* UART2 */
PB28_PF_UART2_CTS,
PB29_PF_UART2_RTS,
PB30_PF_UART2_TXD,
PB31_PF_UART2_RXD,
+ /* I2C */
+ PA15_PF_I2C_SDA,
+ PA16_PF_I2C_SCL,
+ /* SPI */
+ PC13_PF_SPI1_SPI_RDY,
+ PC14_PF_SPI1_SCLK,
+ PC15_PF_SPI1_SS,
+ PC16_PF_SPI1_MISO,
+ PC17_PF_SPI1_MOSI,
};
-static int uart2_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart2_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
-}
+/*
+ * UARTs platform data
+ */
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart1_mxc_init,
- .exit = uart1_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart2_mxc_init,
- .exit = uart2_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
@@ -111,24 +90,6 @@
/*
* I2C
*/
-
-static int i2c_pins[] = {
- PA15_PF_I2C_SDA,
- PA16_PF_I2C_SCL,
-};
-
-static int i2c_init(struct device *dev)
-{
- return mxc_gpio_setup_multiple_pins(i2c_pins,
- ARRAY_SIZE(i2c_pins), "I2C");
-}
-
-static void i2c_exit(struct device *dev)
-{
- mxc_gpio_release_multiple_pins(i2c_pins,
- ARRAY_SIZE(i2c_pins));
-}
-
static struct pcf857x_platform_data pcf857x_data[] = {
{
.gpio_base = 4 * 32,
@@ -139,8 +100,6 @@
static struct imxi2c_platform_data mx1ads_i2c_data = {
.bitrate = 100000,
- .init = i2c_init,
- .exit = i2c_exit,
};
static struct i2c_board_info mx1ads_i2c_devices[] = {
@@ -160,6 +119,9 @@
*/
static void __init mx1ads_init(void)
{
+ mxc_gpio_setup_multiple_pins(mx1ads_pins,
+ ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
/* UART */
mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
@@ -188,7 +150,7 @@
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
@@ -198,7 +160,7 @@
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 0e71f3f..20e0b5b 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -153,7 +153,7 @@
.phys_io = 0x00200000,
.io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
.boot_params = 0x08000100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &scb9328_timer,
.init_machine = scb9328_init,
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 42a7888..c77da58 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -18,6 +18,13 @@
comment "MX2 platforms:"
+config MACH_MX21ADS
+ bool "MX21ADS platform"
+ depends on MACH_MX21
+ help
+ Include support for MX21ADS platform. This includes specific
+ configurations for the board and its peripherals.
+
config MACH_MX27ADS
bool "MX27ADS platform"
depends on MACH_MX27
@@ -46,4 +53,18 @@
endchoice
+config MACH_MX27_3DS
+ bool "MX27PDK platform"
+ depends on MACH_MX27
+ help
+ Include support for MX27PDK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX27LITE
+ bool "LogicPD MX27 LITEKIT platform"
+ depends on MACH_MX27
+ help
+ Include support for MX27 LITEKIT platform. This includes specific
+ configurations for the board and its peripherals.
+
endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 950649a..b9b1cca 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -11,6 +11,10 @@
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
obj-$(CONFIG_MACH_PCM038) += pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
+obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 999d013..fa2b292 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -48,6 +48,25 @@
__raw_writel(reg, clk->enable_reg);
}
+static unsigned long _clk_generic_round_rate(struct clk *clk,
+ unsigned long rate,
+ u32 max_divisor)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div > max_divisor)
+ div = max_divisor;
+
+ return parent_rate / div;
+}
+
static int _clk_spll_enable(struct clk *clk)
{
u32 reg;
@@ -78,19 +97,7 @@
static unsigned long _clk_perclkx_round_rate(struct clk *clk,
unsigned long rate)
{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 64)
- div = 64;
-
- return parent_rate / div;
+ return _clk_generic_round_rate(clk, rate, 64);
}
static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
@@ -130,6 +137,32 @@
return parent_rate / (usb_pdf + 1U);
}
+static unsigned long _clk_usb_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+ div--;
+
+ reg = CSCR() & ~CCM_CSCR_USB_MASK;
+ reg |= div << CCM_CSCR_USB_OFFSET;
+ __raw_writel(reg, CCM_CSCR);
+
+ return 0;
+}
+
static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
{
unsigned long parent_rate;
@@ -595,11 +628,14 @@
static struct clk usb_clk[] = {
{
.parent = &spll_clk,
+ .secondary = &usb_clk[1],
.get_rate = _clk_usb_recalc,
.enable = _clk_enable,
.enable_reg = CCM_PCCR_USBOTG_REG,
.enable_shift = CCM_PCCR_USBOTG_OFFSET,
.disable = _clk_disable,
+ .round_rate = _clk_usb_round_rate,
+ .set_rate = _clk_usb_set_rate,
}, {
.parent = &hclk_clk,
.enable = _clk_enable,
@@ -768,18 +804,7 @@
static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 8)
- div = 8;
-
- return parent_rate / div;
+ return _clk_generic_round_rate(clk, rate, 8);
}
static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
@@ -921,7 +946,7 @@
_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
- _REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+ _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bd51dd0..169372f 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -69,7 +69,17 @@
* system startup to create static physical to virtual
* memory map for the IO modules.
*/
-void __init mxc_map_io(void)
+void __init mx21_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX21);
+
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+
+void __init mx27_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX27);
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
new file mode 100644
index 0000000..a5ee461
--- /dev/null
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -0,0 +1,286 @@
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+ /* CS8900A */
+ (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+
+ /* UART3 (IrDA) - only TXD and RXD */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+
+ /* UART4 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+
+ /* LCDC */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA24_PF_REV, /* Sharp panel dedicated signal */
+ PA25_PF_CLS, /* Sharp panel dedicated signal */
+ PA26_PF_PS, /* Sharp panel dedicated signal */
+ PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+
+ /* MMC/SDHC */
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+
+ /* NFC */
+ PF0_PF_NRFB,
+ PF1_PF_NFCE,
+ PF2_PF_NFWP,
+ PF3_PF_NFCLE,
+ PF4_PF_NFALE,
+ PF5_PF_NFRE,
+ PF6_PF_NFWE,
+ PF7_PF_NFIO0,
+ PF8_PF_NFIO1,
+ PF9_PF_NFIO2,
+ PF10_PF_NFIO3,
+ PF11_PF_NFIO4,
+ PF12_PF_NFIO5,
+ PF13_PF_NFIO6,
+ PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+ .width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+ .start = CS0_BASE_ADDR,
+ .end = CS0_BASE_ADDR + 0x02000000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mx21ads_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(MX21ADS_IO_REG);
+ tmp |= MX21ADS_IO_LCDON;
+ __raw_writew(tmp, MX21ADS_IO_REG);
+ return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(MX21ADS_IO_REG);
+ tmp &= ~MX21ADS_IO_LCDON;
+ __raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_platform_data mx21ads_fb_data = {
+ .pixclock = 188679, /* in ps */
+ .xres = 240,
+ .yres = 320,
+
+ .bpp = 16,
+ .hsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 16,
+
+ .vsync_len = 1,
+ .upper_margin = 8,
+ .lower_margin = 10,
+ .fixed_screen_cpu = 0,
+
+ .pcr = 0xFB108BC7,
+ .pwmr = 0x00A901ff,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020008,
+
+ .init = mx21ads_fb_init,
+ .exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+ return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIOD(25), detect_irq,
+ IRQF_TRIGGER_FALLING, "mmc-detect", data);
+ if (ret)
+ goto out;
+ return 0;
+out:
+ return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+ .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+ .get_ro = mx21ads_sdhc_get_ro,
+ .init = mx21ads_sdhc_init,
+ .exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+ /*
+ * Memory-mapped I/O on MX21ADS Base board:
+ * - CS8900A Ethernet controller
+ * - ST16C2552CJ UART
+ * - CPU and Base board version
+ * - Base board I/O register
+ */
+ {
+ .virtual = MX21ADS_MMIO_BASE_ADDR,
+ .pfn = __phys_to_pfn(CS1_BASE_ADDR),
+ .length = MX21ADS_MMIO_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init mx21ads_map_io(void)
+{
+ mx21_map_io();
+ iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+ "mx21ads");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+ mxc_register_device(&mxc_uart_device3, &uart_pdata);
+ mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+ mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+ mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+ .init = mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx21ads_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx21ads_board_init,
+ .timer = &mx21ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 4a3b097..02dadda 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,6 +23,8 @@
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -33,9 +35,117 @@
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int mx27ads_pins[] = {
+ /* UART0 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART1 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART2 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* UART3 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* UART4 */
+ PB18_AF_UART5_TXD,
+ PB19_AF_UART5_RXD,
+ PB20_AF_UART5_CTS,
+ PB21_AF_UART5_RTS,
+ /* UART5 */
+ PB10_AF_UART6_TXD,
+ PB12_AF_UART6_CTS,
+ PB11_AF_UART6_RXD,
+ PB13_AF_UART6_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* FB */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /* OWIRE */
+ PE16_AF_OWIRE,
+ /* SDHC1*/
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ /* SDHC2*/
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
/* ADS's NOR flash */
static struct physmap_flash_data mx27ads_flash_data = {
.width = 2,
@@ -58,189 +168,113 @@
.resource = &mx27ads_flash_resource,
};
-static int mxc_uart0_pins[] = {
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+ .bitrate = 100000,
};
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins));
- return 0;
-}
-
-static int mxc_uart1_pins[] = {
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD
+static struct i2c_board_info mx27ads_i2c_devices[] = {
};
-static int uart_mxc_port1_init(struct platform_device *pdev)
+void lcd_power(int on)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
+ if (on)
+ __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+ else
+ __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
}
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
+static struct imx_fb_platform_data mx27ads_fb_data = {
+ .pixclock = 188679,
+ .xres = 240,
+ .yres = 320,
-static int mxc_uart2_pins[] = {
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 9,
+ .right_margin = 16,
+
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .fixed_screen_cpu = 0,
+
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xFB008BC0,
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+
+ .lcd_power = lcd_power,
};
-static int uart_mxc_port2_init(struct platform_device *pdev)
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
+ return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+ "sdhc1-card-detect", data);
}
-static int uart_mxc_port2_exit(struct platform_device *pdev)
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
+ return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+ "sdhc2-card-detect", data);
}
-static int mxc_uart3_pins[] = {
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOE(21), data);
+}
+
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOB(7), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .init = mx27ads_sdhc1_init,
+ .exit = mx27ads_sdhc1_exit,
};
-static int uart_mxc_port3_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
- ARRAY_SIZE(mxc_uart3_pins), "UART3");
-}
-
-static int uart_mxc_port3_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart3_pins,
- ARRAY_SIZE(mxc_uart3_pins));
- return 0;
-}
-
-static int mxc_uart4_pins[] = {
- PB18_AF_UART5_TXD,
- PB19_AF_UART5_RXD,
- PB20_AF_UART5_CTS,
- PB21_AF_UART5_RTS
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .init = mx27ads_sdhc2_init,
+ .exit = mx27ads_sdhc2_exit,
};
-static int uart_mxc_port4_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
- ARRAY_SIZE(mxc_uart4_pins), "UART4");
-}
-
-static int uart_mxc_port4_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart4_pins,
- ARRAY_SIZE(mxc_uart4_pins));
- return 0;
-}
-
-static int mxc_uart5_pins[] = {
- PB10_AF_UART6_TXD,
- PB12_AF_UART6_CTS,
- PB11_AF_UART6_RXD,
- PB13_AF_UART6_RTS
-};
-
-static int uart_mxc_port5_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
- ARRAY_SIZE(mxc_uart5_pins), "UART5");
-}
-
-static int uart_mxc_port5_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart5_pins,
- ARRAY_SIZE(mxc_uart5_pins));
- return 0;
-}
-
static struct platform_device *platform_devices[] __initdata = {
&mx27ads_nor_mtd_device,
&mxc_fec_device,
+ &mxc_w1_master_device,
};
-static int mxc_fec_pins[] = {
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
- mxc_gpio_setup_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart_mxc_port0_init,
- .exit = uart_mxc_port0_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port1_init,
- .exit = uart_mxc_port1_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port2_init,
- .exit = uart_mxc_port2_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port3_init,
- .exit = uart_mxc_port3_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port4_init,
- .exit = uart_mxc_port4_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port5_init,
- .exit = uart_mxc_port5_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
static void __init mx27ads_board_init(void)
{
- gpio_fec_active();
+ mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+ "mx27ads");
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
@@ -248,6 +282,15 @@
mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+ mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, mx27ads_i2c_devices,
+ ARRAY_SIZE(mx27ads_i2c_devices));
+ mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+ mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
@@ -277,7 +320,7 @@
static void __init mx27ads_map_io(void)
{
- mxc_map_io();
+ mx27_map_io();
iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
}
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
new file mode 100644
index 0000000..3ae11cb
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27lite.h>
+
+#include "devices.h"
+
+static unsigned int mx27lite_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static void __init mx27lite_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+ "imx27lite");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27lite_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+ .init = mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx27lite_init,
+ .timer = &mx27lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
new file mode 100644
index 0000000..1d9238c
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+ "mx27pdk");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+ .init = mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx27pdk_init,
+ .timer = &mx27pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index aa4eaa6..a4628d0 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -17,28 +17,84 @@
* MA 02110-1301, USA.
*/
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/iomux.h>
-#ifdef CONFIG_I2C_IMX
#include <mach/i2c.h>
-#endif
-#include <asm/mach/time.h>
+#include <mach/iomux.h>
#include <mach/imx-uart.h>
-#include <mach/board-pcm038.h>
#include <mach/mxc_nand.h>
#include "devices.h"
+static int pcm038_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART2 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART3 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* SPI1 */
+ PD25_PF_CSPI1_RDY,
+ PD27_PF_CSPI1_SS1,
+ PD28_PF_CSPI1_SS0,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+ /* SSI1 */
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ /* SSI4 */
+ PC16_PF_SSI4_FS,
+ PC17_PF_SSI4_RXD,
+ PC18_PF_SSI4_TXD,
+ PC19_PF_SSI4_CLK,
+};
+
/*
* Phytec's PCM038 comes with 2MiB battery buffered SRAM,
* 16 bit width
@@ -88,107 +144,16 @@
.resource = &pcm038_flash_resource,
};
-static int mxc_uart0_pins[] = {
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS
-};
-
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins));
- return 0;
-}
-
-static int mxc_uart1_pins[] = {
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD
-};
-
-static int uart_mxc_port1_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS };
-
-static int uart_mxc_port2_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart_mxc_port2_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
-}
-
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart_mxc_port0_init,
- .exit = uart_mxc_port0_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port1_init,
- .exit = uart_mxc_port1_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port2_init,
- .exit = uart_mxc_port2_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
-static int mxc_fec_pins[] = {
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
- mxc_gpio_setup_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
static struct mxc_nand_platform_data pcm038_nand_board_info = {
.width = 1,
.hw_ecc = 1,
@@ -210,27 +175,8 @@
__raw_writel(0x22220a00, CSCR_A(1));
}
-#ifdef CONFIG_I2C_IMX
-static int mxc_i2c1_pins[] = {
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL
-};
-
-static int pcm038_i2c_1_init(struct device *dev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
- "I2C1");
-}
-
-static void pcm038_i2c_1_exit(struct device *dev)
-{
- mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
-}
-
static struct imxi2c_platform_data pcm038_i2c_1_data = {
.bitrate = 100000,
- .init = pcm038_i2c_1_init,
- .exit = pcm038_i2c_1_exit,
};
static struct at24_platform_data board_eeprom = {
@@ -253,11 +199,12 @@
.type = "lm75"
}
};
-#endif
static void __init pcm038_init(void)
{
- gpio_fec_active();
+ mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+ "PCM038");
+
pcm038_init_sram();
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
@@ -267,13 +214,11 @@
mxc_gpio_mode(PE16_AF_OWIRE);
mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
-#ifdef CONFIG_I2C_IMX
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pcm038_i2c_devices,
ARRAY_SIZE(pcm038_i2c_devices));
mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-#endif
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
@@ -295,7 +240,7 @@
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx27_map_io,
.init_irq = mxc_init_irq,
.init_machine = pcm038_init,
.timer = &pcm038_timer,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index bf4e520..6a3acaf5 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -16,71 +16,107 @@
* MA 02110-1301, USA.
*/
-#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/platform_device.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/mmc.h>
-#include <mach/imxfb.h>
#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
#include "devices.h"
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_pins[] = {
+static int pcm970_pins[] = {
+ /* SDHC */
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
+ GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
+ /* display */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /*
+ * it seems the data line misses a pullup, so we must enable
+ * the internal pullup as a local workaround
+ */
+ PD17_PF_I2C_DATA | GPIO_PUEN,
+ PD18_PF_I2C_CLK,
+ /* Camera */
+ PB10_PF_CSI_D0,
+ PB11_PF_CSI_D1,
+ PB12_PF_CSI_D2,
+ PB13_PF_CSI_D3,
+ PB14_PF_CSI_D4,
+ PB15_PF_CSI_MCLK,
+ PB16_PF_CSI_PIXCLK,
+ PB17_PF_CSI_D5,
+ PB18_PF_CSI_D6,
+ PB19_PF_CSI_D7,
+ PB20_PF_CSI_VSYNC,
+ PB21_PF_CSI_HSYNC,
};
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_PORTC + 28);
+}
+
static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
{
int ret;
- ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
- if(ret)
- return ret;
-
- ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+ ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
if (ret)
- goto out_release_gpio;
-
- set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+ return ret;
ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
- if (ret)
- goto out_release_gpio;
+ if (ret) {
+ free_irq(IRQ_GPIOC(29), data);
+ return ret;
+ }
- mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
gpio_direction_input(GPIO_PORTC + 28);
return 0;
-
-out_release_gpio:
- mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins));
- return ret;
}
static void pcm970_sdhc2_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOC(29), data);
gpio_free(GPIO_PORTC + 28);
- mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins));
}
static struct imxmmc_platform_data sdhc_pdata = {
@@ -89,29 +125,6 @@
.exit = pcm970_sdhc2_exit,
};
-static int mxc_fb_pins[] = {
- PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2,
- PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6,
- PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10,
- PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14,
- PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV,
- PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC,
- PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD
-};
-
-static int pcm038_fb_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
- ARRAY_SIZE(mxc_fb_pins), "FB");
-}
-
-static int pcm038_fb_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
-
- return 0;
-}
-
/*
* Connected is a portrait Sharp-QVGA display
* of type: LQ035Q7DH06
@@ -144,9 +157,6 @@
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
-
- .init = pcm038_fb_init,
- .exit = pcm038_fb_exit,
};
/*
@@ -157,6 +167,9 @@
*/
void __init pcm970_baseboard_init(void)
{
+ mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+ "PCM970");
+
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
}
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 194b842..17a21a2 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,10 +1,12 @@
if ARCH_MX3
config ARCH_MX31
+ select ARCH_HAS_RNGA
bool
config ARCH_MX35
bool
+ select ARCH_MXC_IOMUX_V3
comment "MX3 platforms:"
@@ -37,7 +39,6 @@
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
- default n
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
@@ -45,7 +46,6 @@
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
select ARCH_MX31
- default n
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
@@ -53,17 +53,43 @@
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
- default n
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
+config MACH_MX31LILLY
+ bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+ select ARCH_MX31
+ help
+ Include support for mx31 based LILLY1131 modules. This includes
+ specific configurations for the board and its peripherals.
+
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
select ARCH_MX31
- default n
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
+config MACH_PCM043
+ bool "Support Phytec pcm043 (i.MX35) platforms"
+ select ARCH_MX35
+ help
+ Include support for Phytec pcm043 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+ bool "Support Atmark Armadillo-500 Development Base Board"
+ select ARCH_MX31
+ help
+ Include support for Atmark Armadillo-500 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+ bool "Support MX35PDK platform"
+ select ARCH_MX35
+ default n
+ help
+ Include support for MX35PDK platform. This includes specific
+ configurations for the board and its peripherals.
endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 272c8a9..0322696 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -8,9 +8,13 @@
obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
obj-$(CONFIG_MACH_QONG) += qong.o
+obj-$(CONFIG_MACH_PCM043) += pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
new file mode 100644
index 0000000..54118109
--- /dev/null
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -0,0 +1,295 @@
+/*
+ * armadillo5x0.c
+ *
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * updates in http://alberdroid.blogspot.com/
+ *
+ * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
+ * Based on mx31ads.c and pcm037.c Great Work!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-armadillo5x0.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static int armadillo5x0_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* UART2 */
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ /* LAN9118_IRQ */
+ IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ /* Framebuffer */
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+ { /* 640x480 @ 60 Hz */
+ .name = "CRT-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721,
+ .left_margin = 35,
+ .right_margin = 115,
+ .upper_margin = 43,
+ .lower_margin = 1,
+ .hsync_len = 10,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {/* 800x600 @ 56 Hz */
+ .name = "CRT-SVGA",
+ .refresh = 56,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 30000,
+ .left_margin = 30,
+ .right_margin = 108,
+ .upper_margin = 13,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "CRT-VGA",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+/*
+ * SDHC 1
+ * MMC support
+ */
+static int armadillo5x0_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static int armadillo5x0_sdhc1_init(struct device *dev,
+ irq_handler_t detect_irq, void *data)
+{
+ int ret;
+ int gpio_det, gpio_wp;
+
+ gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
+ gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
+
+ ret = gpio_request(gpio_det, "sdhc-card-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(gpio_det);
+
+ ret = gpio_request(gpio_wp, "sdhc-write-protect");
+ if (ret)
+ goto err_gpio_free;
+
+ gpio_direction_input(gpio_wp);
+
+ /* When supported the trigger type have to be BOTH */
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "sdhc-detect", data);
+
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(gpio_wp);
+
+err_gpio_free:
+ gpio_free(gpio_det);
+
+ return ret;
+
+}
+
+static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+ gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
+ gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+ .get_ro = armadillo5x0_sdhc1_get_ro,
+ .init = armadillo5x0_sdhc1_init,
+ .exit = armadillo5x0_sdhc1_exit,
+};
+
+/*
+ * SMSC 9118
+ * Network support
+ */
+static struct resource armadillo5x0_smc911x_resources[] = {
+ {
+ .start = CS3_BASE_ADDR,
+ .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+ .flags = SMSC911X_USE_32BIT,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device armadillo5x0_smc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources),
+ .resource = armadillo5x0_smc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_info,
+ },
+};
+
+/* UART device data */
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &armadillo5x0_smc911x_device,
+};
+
+/*
+ * Perform board specific initializations
+ */
+static void __init armadillo5x0_init(void)
+{
+ mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
+ ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ /* Register UART */
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+ /* SMSC9118 IRQ pin */
+ gpio_direction_input(MX31_PIN_GPIO1_0);
+
+ /* Register SDHC */
+ mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+
+ /* Register FB */
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init armadillo5x0_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer armadillo5x0_timer = {
+ .init = armadillo5x0_timer_init,
+};
+
+MACHINE_START(ARMADILLO5X0, "Armadillo-500")
+ /* Maintainer: Alberto Panizzo */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x00000100,
+ .map_io = mx31_map_io,
+ .init_irq = mxc_init_irq,
+ .timer = &armadillo5x0_timer,
+ .init_machine = armadillo5x0_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 53a112d..0d76521 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -147,34 +147,16 @@
{ .arm = 0, .ahb = 0, .sel = 0},
};
-static struct arm_ahb_div clk_automotive[] = {
- { .arm = 1, .ahb = 3, .sel = 0},
- { .arm = 1, .ahb = 2, .sel = 1},
- { .arm = 2, .ahb = 1, .sel = 1},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 1, .ahb = 6, .sel = 0},
- { .arm = 1, .ahb = 4, .sel = 1},
- { .arm = 2, .ahb = 2, .sel = 1},
- { .arm = 0, .ahb = 0, .sel = 0},
-};
-
static unsigned long get_rate_arm(void)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
struct arm_ahb_div *aad;
unsigned long fref = get_rate_mpll();
- if (pdr0 & 1) {
- /* consumer path */
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
- if (aad->sel)
- fref = fref * 2 / 3;
- } else {
- /* auto path */
- aad = &clk_automotive[(pdr0 >> 9) & 0x7];
- if (aad->sel)
- fref = fref * 3 / 4;
- }
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+ if (aad->sel)
+ fref = fref * 2 / 3;
+
return fref / aad->arm;
}
@@ -184,12 +166,7 @@
struct arm_ahb_div *aad;
unsigned long fref = get_rate_mpll();
- if (pdr0 & 1)
- /* consumer path */
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
- else
- /* auto path */
- aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
return fref / aad->ahb;
}
@@ -430,7 +407,8 @@
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
- _REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+ _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+ _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
@@ -462,8 +440,6 @@
int i;
unsigned int ll = 0;
- mxc_set_cpu_type(MXC_CPU_MX35);
-
#ifdef CONFIG_DEBUG_LL_CONSOLE
ll = (3 << 16);
#endif
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 9957a11..217d114 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -483,7 +483,7 @@
DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
@@ -566,13 +566,18 @@
u32 reg;
int i;
- mxc_set_cpu_type(MXC_CPU_MX31);
-
ckih_rate = fref;
for (i = 0; i < ARRAY_SIZE(lookups); i++)
clkdev_add(&lookups[i]);
+ /* change the csi_clk parent if necessary */
+ reg = __raw_readl(MXC_CCM_CCMR);
+ if (!(reg & MXC_CCM_CCMR_CSCS))
+ if (clk_set_parent(&csi_clk, &usb_pll_clk))
+ pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
/* Turn off all possible clocks */
__raw_writel((3 << 4), MXC_CCM_CGR0);
__raw_writel(0, MXC_CCM_CGR1);
@@ -581,6 +586,12 @@
MX32, but still required to be set */
MXC_CCM_CGR2);
+ /*
+ * Before turning off usb_pll make sure ipg_per_clk is generated
+ * by ipg_clk and not usb_pll.
+ */
+ __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
usb_pll_disable(&usb_pll_clk);
pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 380be0c..d927edd 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -17,13 +17,17 @@
* Boston, MA 02110-1301, USA.
*/
+#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
+#include <mach/common.h>
#include <mach/imx-uart.h>
+#include <mach/mx3_camera.h>
#include "devices.h"
@@ -283,6 +287,21 @@
.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
.resource = mxcsdhc1_resources,
};
+
+static struct resource rnga_resources[] = {
+ {
+ .start = RNGA_BASE_ADDR,
+ .end = RNGA_BASE_ADDR + 0x28,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mxc_rnga_device = {
+ .name = "mxc_rnga",
+ .id = -1,
+ .num_resources = 1,
+ .resource = rnga_resources,
+};
#endif /* CONFIG_ARCH_MX31 */
/* i.MX31 Image Processing Unit */
@@ -329,10 +348,54 @@
.num_resources = ARRAY_SIZE(fb_resources),
.resource = fb_resources,
.dev = {
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+static struct resource camera_resources[] = {
+ {
+ .start = IPU_CTRL_BASE_ADDR + 0x60,
+ .end = IPU_CTRL_BASE_ADDR + 0x87,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mx3_camera = {
+ .name = "mx3-camera",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(camera_resources),
+ .resource = camera_resources,
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource otg_resources[] = {
+ {
+ .start = OTG_BASE_ADDR,
+ .end = OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB3,
+ .end = MXC_INT_USB3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+ .name = "fsl-usb2-udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &otg_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = otg_resources,
+ .num_resources = ARRAY_SIZE(otg_resources),
+};
+
#ifdef CONFIG_ARCH_MX35
static struct resource mxc_fec_resources[] = {
{
@@ -359,6 +422,7 @@
if (cpu_is_mx31()) {
mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+ mxc_register_device(&mxc_rnga_device, NULL);
}
if (cpu_is_mx35()) {
mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 88c04b2..ffd494d 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -11,6 +11,10 @@
extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx3_ipu;
extern struct platform_device mx3_fb;
+extern struct platform_device mx3_camera;
extern struct platform_device mxc_fec_device;
extern struct platform_device mxcsdhc_device0;
extern struct platform_device mxcsdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_rnga_device;
+
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 40ffc5a..c66ccbc 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,7 +21,6 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/kernel.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
@@ -94,15 +93,13 @@
EXPORT_SYMBOL(mxc_iomux_set_pad);
/*
- * setups a single pin:
+ * allocs a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
*/
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
- unsigned gpio;
if (pad >= (PIN_MAX + 1)) {
printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
@@ -113,19 +110,13 @@
if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
pad, label ? label : "?");
- return -EINVAL;
+ return -EBUSY;
}
mxc_iomux_mode(pin);
- /* if we have a gpio, we can allocate it */
- gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
- if (gpio < (GPIO_PORT_MAX + 1) * 32)
- if (gpio_request(gpio, label))
- return -EINVAL;
-
return 0;
}
-EXPORT_SYMBOL(mxc_iomux_setup_pin);
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
const char *label)
@@ -135,7 +126,8 @@
int ret = -EINVAL;
for (i = 0; i < count; i++) {
- if (mxc_iomux_setup_pin(*p, label))
+ ret = mxc_iomux_alloc_pin(*p, label);
+ if (ret)
goto setup_error;
p++;
}
@@ -150,14 +142,9 @@
void mxc_iomux_release_pin(const unsigned int pin)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
- unsigned gpio;
if (pad < (PIN_MAX + 1))
clear_bit(pad, mxc_pin_alloc_map);
-
- gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
- if (gpio < (GPIO_PORT_MAX + 1) * 32)
- gpio_free(gpio);
}
EXPORT_SYMBOL(mxc_iomux_release_pin);
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 9e1459c..1f5fdd4 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -72,8 +72,17 @@
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
-void __init mxc_map_io(void)
+void __init mx31_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX31);
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx35_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX35);
+
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index a6d6efe..30e2767 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -187,7 +187,7 @@
/*
* Configure INT line as GPIO input
*/
- mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+ mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
@@ -511,7 +511,7 @@
*/
static void __init mx31ads_map_io(void)
{
- mxc_map_io();
+ mx31_map_io();
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
new file mode 100644
index 0000000..3b3a78f
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -0,0 +1,216 @@
+/*
+ * LILLY-1131 development board support
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * based on code for other MX31 boards,
+ *
+ * Copyright 2005-2007 Freescale Semiconductor
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+#include <mach/mmc.h>
+#include <mach/mx3fb.h>
+#include <mach/ipu.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LILLY-1131 development board. If you design an own baseboard for the
+ * module, use this file as base for support code.
+ */
+
+static unsigned int lilly_db_board_pins[] __initdata = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3,
+ MX31_PIN_CSPI3_SCLK__RTS3,
+ MX31_PIN_CSPI3_SPI_RDY__CTS3,
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ MX31_PIN_CONTRAST__CONTRAST,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC support */
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int gpio_det, gpio_wp;
+
+static int mxc_mmc1_init(struct device *dev,
+ irq_handler_t detect_irq, void *data)
+{
+ int ret;
+
+ gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
+ gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
+
+ ret = gpio_request(gpio_det, "MMC detect");
+ if (ret)
+ return ret;
+
+ ret = gpio_request(gpio_wp, "MMC w/p");
+ if (ret)
+ goto exit_free_det;
+
+ gpio_direction_input(gpio_det);
+ gpio_direction_input(gpio_wp);
+
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "MMC detect", data);
+ if (ret)
+ goto exit_free_wp;
+
+ return 0;
+
+exit_free_wp:
+ gpio_free(gpio_wp);
+
+exit_free_det:
+ gpio_free(gpio_det);
+
+ return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+ gpio_free(gpio_det);
+ gpio_free(gpio_wp);
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+ .get_ro = mxc_mmc1_get_ro,
+ .init = mxc_mmc1_init,
+ .exit = mxc_mmc1_exit,
+};
+
+/* Framebuffer support */
+static struct ipu_platform_data ipu_data __initdata = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb = {
+ /* 640x480 TFT panel (IPS-056T) */
+ .name = "CRT-VGA",
+ .refresh = 64,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 30000,
+ .left_margin = 200,
+ .right_margin = 2,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+};
+
+static struct mx3fb_platform_data fb_pdata __initdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "CRT-VGA",
+ .mode = &fb_modedb,
+ .num_modes = 1,
+};
+
+#define LCD_VCC_EN_GPIO (7)
+
+static void __init mx31lilly_init_fb(void)
+{
+ if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
+ printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
+ return;
+ }
+
+ mxc_register_device(&mx3_ipu, &ipu_data);
+ mxc_register_device(&mx3_fb, &fb_pdata);
+ gpio_direction_output(LCD_VCC_EN_GPIO, 1);
+}
+
+void __init mx31lilly_db_init(void)
+{
+ mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
+ ARRAY_SIZE(lilly_db_board_pins),
+ "development board pins");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+ mx31lilly_init_fb();
+}
+
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
new file mode 100644
index 0000000..6ab2f16
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -0,0 +1,155 @@
+/*
+ * LILLY-1131 module support
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * based on code for other MX31 boards,
+ *
+ * Copyright 2005-2007 Freescale Semiconductor
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+
+#include "devices.h"
+
+/*
+ * This file contains module-specific initialization routines for LILLY-1131.
+ * Initialization of peripherals found on the baseboard is implemented in the
+ * appropriate baseboard support code.
+ */
+
+/* SMSC ethernet support */
+
+static struct resource smsc91x_resources[] = {
+ {
+ .start = CS4_BASE_ADDR,
+ .end = CS4_BASE_ADDR + 0xffff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ }
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT |
+ SMSC911X_SAVE_MAC_ADDRESS |
+ SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc91x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc91x_resources),
+ .resource = smsc91x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ }
+};
+
+/* NOR flash */
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+};
+
+static struct resource nor_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .resource = &nor_flash_resource,
+ .num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &smsc91x_device,
+ &physmap_flash_device,
+ &mxc_i2c_device1,
+};
+
+static int mx31lilly_baseboard;
+core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
+
+static void __init mx31lilly_board_init(void)
+{
+ switch (mx31lilly_baseboard) {
+ case MX31LILLY_NOBOARD:
+ break;
+ case MX31LILLY_DB:
+ mx31lilly_db_init();
+ break;
+ default:
+ printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
+ mx31lilly_baseboard);
+ }
+
+ mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx31lilly_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31lilly_timer = {
+ .init = mx31lilly_timer_init,
+};
+
+MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx31lilly_board_init,
+ .timer = &mx31lilly_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 894d98c..86fe70f 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -22,6 +22,9 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -32,11 +35,64 @@
#include <asm/page.h>
#include <asm/setup.h>
#include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
/*
* This file contains the board-specific initialization routines.
*/
+static unsigned int mx31lite_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* LAN9117 IRQ pin */
+ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+ [0] = {
+ .start = CS4_BASE_ADDR,
+ .end = CS4_BASE_ADDR + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ .end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
/*
* This structure defines the MX31 memory map.
*/
@@ -59,7 +115,7 @@
*/
void __init mx31lite_map_io(void)
{
- mxc_map_io();
+ mx31_map_io();
iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
}
@@ -68,6 +124,22 @@
*/
static void __init mxc_board_init(void)
{
+ int ret;
+
+ mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+ "mx31lite");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+ /* SMSC9117 IRQ pin */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else {
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ platform_device_register(&smsc911x_device);
+ }
}
static void __init mx31lite_timer_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index d080b4a..4704405 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,33 +16,142 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int devboard_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+ /* SDHC2 */
+ MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+ MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+ MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+ MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+};
+
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static int mxc_uart1_pins[] = {
- MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int devboard_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC2_WP);
+}
+
+static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC2_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC2_CD);
+
+ ret = gpio_request(SDHC2_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC2_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc2-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC2_WP);
+err_gpio_free:
+ gpio_free(SDHC2_CD);
+
+ return ret;
+}
+
+static void devboard_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC2_CD), data);
+ gpio_free(SDHC2_WP);
+ gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .get_ro = devboard_sdhc2_get_ro,
+ .init = devboard_sdhc2_init,
+ .exit = devboard_sdhc2_exit,
};
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void devboard_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_devboard_init(void)
{
printk(KERN_INFO "Initializing mx31devboard peripherals\n");
- mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+
+ mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
+ "devboard");
+
mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+ mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+ devboard_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 9ef9566..641c3d6 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,22 +16,144 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int marxbot_pins[] = {
+ /* SDHC2 */
+ MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+ MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+ MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+ MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+ /* CSI */
+ MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+ MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+ MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+ MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+ MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+ MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+ MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+ MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+ MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+ MX31_PIN_TXD2__GPIO1_28,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int marxbot_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC2_WP);
+}
+
+static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC2_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC2_CD);
+
+ ret = gpio_request(SDHC2_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC2_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc2-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC2_WP);
+err_gpio_free:
+ gpio_free(SDHC2_CD);
+
+ return ret;
+}
+
+static void marxbot_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC2_CD), data);
+ gpio_free(SDHC2_WP);
+ gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .get_ro = marxbot_sdhc2_get_ro,
+ .init = marxbot_sdhc2_init,
+ .exit = marxbot_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void marxbot_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_marxbot_init(void)
{
printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+
+ mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
+ "marxbot");
+
+ mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+ marxbot_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 34c2a1b9..a17f2e4 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,26 +16,47 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
-#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/memory.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
-#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int moboard_pins[] = {
+ /* UART0 */
+ MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+ /* UART4 */
+ MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+ MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+ /* I2C0 */
+ MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+ /* I2C1 */
+ MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+ MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+};
+
static struct physmap_flash_data mx31moboard_flash_data = {
.width = 2,
};
@@ -60,17 +81,69 @@
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct platform_device *devices[] __initdata = {
- &mx31moboard_flash,
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+ .bitrate = 400000,
};
-static int mxc_uart0_pins[] = {
- MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+ .bitrate = 100000,
};
-static int mxc_uart4_pins[] = {
- MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
- MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC1_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC1_CD);
+
+ ret = gpio_request(SDHC1_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC1_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc1-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC1_WP);
+err_gpio_free:
+ gpio_free(SDHC1_CD);
+
+ return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC1_CD), data);
+ gpio_free(SDHC1_WP);
+ gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .get_ro = moboard_sdhc1_get_ro,
+ .init = moboard_sdhc1_init,
+ .exit = moboard_sdhc1_exit,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mx31moboard_flash,
};
static int mx31moboard_baseboard;
@@ -81,14 +154,19 @@
*/
static void __init mxc_board_init(void)
{
+ mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+ "moboard");
+
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
mxc_register_device(&mxc_uart_device4, &uart_pdata);
+ mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+ mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+ mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
@@ -99,7 +177,8 @@
mx31moboard_marxbot_init();
break;
default:
- printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+ printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+ mx31moboard_baseboard);
}
}
@@ -117,7 +196,7 @@
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31moboard_timer,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index bc63f17..c19838d 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -20,6 +20,9 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -41,21 +44,192 @@
* @ingroup System
*/
+static int mx31pdk_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+};
+
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
+/*
+ * Support for the SMSC9217 on the Debug board.
+ */
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
};
-static inline void mxc_init_imx_uart(void)
+static struct resource smsc911x_resources[] = {
+ {
+ .start = LAN9217_BASE_ADDR,
+ .end = LAN9217_BASE_ADDR + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = EXPIO_INT_ENET,
+ .end = EXPIO_INT_ENET,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ uint32_t imr_val;
+ uint32_t int_valid;
+ uint32_t expio_irq;
+
+ imr_val = __raw_readw(CPLD_INT_MASK_REG);
+ int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+ expio_irq = MXC_EXP_IO_BASE;
+ for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+ if ((int_valid & 1) == 0)
+ continue;
+ generic_handle_irq(expio_irq);
+ }
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+ uint16_t reg;
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* mask the interrupt */
+ reg = __raw_readw(CPLD_INT_MASK_REG);
+ reg |= 1 << expio;
+ __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* clear the interrupt status */
+ __raw_writew(1 << expio, CPLD_INT_RESET_REG);
+ __raw_writew(0, CPLD_INT_RESET_REG);
+ /* mask the interrupt */
+ expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+ uint16_t reg;
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* unmask the interrupt */
+ reg = __raw_readw(CPLD_INT_MASK_REG);
+ reg &= ~(1 << expio);
+ __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+ .ack = expio_ack_irq,
+ .mask = expio_mask_irq,
+ .unmask = expio_unmask_irq,
+};
+
+static int __init mx31pdk_init_expio(void)
+{
+ int i;
+ int ret;
+
+ /* Check if there's a debug board connected */
+ if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+ (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+ (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+ /* No Debug board found */
+ return -ENODEV;
+ }
+
+ pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+ __raw_readw(CPLD_CODE_VER_REG));
+
+ /*
+ * Configure INT line as GPIO input
+ */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+ /* Disable the interrupts and clear the status */
+ __raw_writew(0, CPLD_INT_MASK_REG);
+ __raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+ __raw_writew(0, CPLD_INT_RESET_REG);
+ __raw_writew(0x1F, CPLD_INT_MASK_REG);
+ for (i = MXC_EXP_IO_BASE;
+ i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+ i++) {
+ set_irq_chip(i, &expio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+ set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+
+ return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+ {
+ .virtual = SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+ .length = SPBA0_SIZE,
+ .type = MT_DEVICE_NONSHARED,
+ }, {
+ .virtual = CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(CS5_BASE_ADDR),
+ .length = CS5_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+ mx31_map_io();
+ iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
}
/*!
@@ -63,7 +237,13 @@
*/
static void __init mxc_board_init(void)
{
- mxc_init_imx_uart();
+ mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
+ "mx31pdk");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ if (!mx31pdk_init_expio())
+ platform_device_register(&smsc911x_device);
}
static void __init mx31pdk_timer_init(void)
@@ -84,7 +264,7 @@
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31pdk_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31pdk_timer,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
new file mode 100644
index 0000000..6d15374
--- /dev/null
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static struct pad_desc mx35pdk_pads[] = {
+ /* UART1 */
+ MX35_PAD_CTS1__UART1_CTS,
+ MX35_PAD_RTS1__UART1_RTS,
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ /* FEC */
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+ mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+ .init = mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+ /* Maintainer: Freescale Semiconductor, Inc */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mx35pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b5227d8..c6f61a1 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -28,6 +28,10 @@
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -37,7 +41,9 @@
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
#include <mach/board-pcm037.h>
+#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include <mach/mmc.h>
#ifdef CONFIG_I2C_IMX
@@ -46,6 +52,76 @@
#include "devices.h"
+static unsigned int pcm037_pins[] = {
+ /* I2C */
+ MX31_PIN_CSPI2_MOSI__SCL,
+ MX31_PIN_CSPI2_MISO__SDA,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+ /* SPI1 */
+ MX31_PIN_CSPI1_MOSI__MOSI,
+ MX31_PIN_CSPI1_MISO__MISO,
+ MX31_PIN_CSPI1_SCLK__SCLK,
+ MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI1_SS0__SS0,
+ MX31_PIN_CSPI1_SS1__SS1,
+ MX31_PIN_CSPI1_SS2__SS2,
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* UART2 */
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ /* UART3 */
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3,
+ MX31_PIN_CSPI3_SCLK__RTS3,
+ MX31_PIN_CSPI3_SPI_RDY__CTS3,
+ /* LAN9217 irq pin */
+ IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+ /* Onewire */
+ MX31_PIN_BATT_LINE__OWIRE,
+ /* Framebuffer */
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ MX31_PIN_D3_REV__D3_REV,
+ MX31_PIN_CONTRAST__CONTRAST,
+ MX31_PIN_D3_SPL__D3_SPL,
+ MX31_PIN_D3_CLS__D3_CLS,
+ MX31_PIN_LCS0__GPI03_23,
+};
+
static struct physmap_flash_data pcm037_flash_data = {
.width = 2,
};
@@ -56,6 +132,54 @@
.flags = IORESOURCE_MEM,
};
+static int usbotg_pins[] = {
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+ MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+ MX31_PIN_USBOTG_STP__USBOTG_STP,
+};
+
+/* USB OTG HS port */
+static int __init gpio_usbotg_hs_activate(void)
+{
+ int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
+ ARRAY_SIZE(usbotg_pins), "usbotg");
+
+ if (ret < 0) {
+ printk(KERN_ERR "Cannot set up OTG pins\n");
+ return ret;
+ }
+
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ return 0;
+}
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
static struct platform_device pcm037_flash = {
.name = "physmap-flash",
.id = 0,
@@ -127,26 +251,8 @@
};
#ifdef CONFIG_I2C_IMX
-static int i2c_1_pins[] = {
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
-};
-
-static int pcm037_i2c_1_init(struct device *dev)
-{
- return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
- "i2c-1");
-}
-
-static void pcm037_i2c_1_exit(struct device *dev)
-{
- mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
-}
-
static struct imxi2c_platform_data pcm037_i2c_1_data = {
.bitrate = 100000,
- .init = pcm037_i2c_1_init,
- .exit = pcm037_i2c_1_exit,
};
static struct at24_platform_data board_eeprom = {
@@ -166,48 +272,119 @@
};
#endif
-static int sdhc1_pins[] = {
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
-};
-
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
{
- return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
- "sdhc-1");
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+ ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "sdhc-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+ gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+ gpio_free(SDHC1_GPIO_DET);
+
+ return ret;
}
static void pcm970_sdhc1_exit(struct device *dev, void *data)
{
- mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+ gpio_free(SDHC1_GPIO_DET);
+ gpio_free(SDHC1_GPIO_WP);
}
-/* No card and rw detection at the moment */
static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+ .get_ro = pcm970_sdhc1_get_ro,
+#endif
.init = pcm970_sdhc1_init,
.exit = pcm970_sdhc1_exit,
};
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
- &pcm037_eth,
&pcm037_sram_device,
};
-static int uart0_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
};
-static int uart2_pins[] = {
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz Sharp */
+ .name = "Sharp-LQ035Q7DH06-QVGA",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "Sharp-LQ035Q7DH06-QVGA",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
};
/*
@@ -215,21 +392,28 @@
*/
static void __init mxc_board_init(void)
{
+ int ret;
+
+ mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+ "pcm037");
+
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
mxc_register_device(&mxc_uart_device2, &uart_pdata);
- mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
/* LAN9217 IRQ pin */
- if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
- "pcm037-eth"))
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ platform_device_register(&pcm037_eth);
+ }
+
#ifdef CONFIG_I2C_IMX
i2c_register_board_info(1, pcm037_i2c_devices,
@@ -239,6 +423,10 @@
#endif
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ if (!gpio_usbotg_hs_activate())
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
static void __init pcm037_timer_init(void)
@@ -255,7 +443,7 @@
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
new file mode 100644
index 0000000..8d27c32
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz */
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "Sharp-LQ035Q7",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+ .width = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm043_flash_data,
+ },
+ .resource = &pcm043_flash_resource,
+ .num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+ .bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563",
+ }
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+ &pcm043_flash,
+ &mxc_fec_device,
+};
+
+static struct pad_desc pcm043_pads[] = {
+ /* UART1 */
+ MX35_PAD_CTS1__UART1_CTS,
+ MX35_PAD_RTS1__UART1_RTS,
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ /* UART2 */
+ MX35_PAD_CTS2__UART2_CTS,
+ MX35_PAD_RTS2__UART2_RTS,
+ MX35_PAD_TXD2__UART2_TXD_MUX,
+ MX35_PAD_RXD2__UART2_RXD_MUX,
+ /* FEC */
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ /* I2C1 */
+ MX35_PAD_I2C1_CLK__I2C1_SCL,
+ MX35_PAD_I2C1_DAT__I2C1_SDA,
+ /* Display */
+ MX35_PAD_LD0__IPU_DISPB_DAT_0,
+ MX35_PAD_LD1__IPU_DISPB_DAT_1,
+ MX35_PAD_LD2__IPU_DISPB_DAT_2,
+ MX35_PAD_LD3__IPU_DISPB_DAT_3,
+ MX35_PAD_LD4__IPU_DISPB_DAT_4,
+ MX35_PAD_LD5__IPU_DISPB_DAT_5,
+ MX35_PAD_LD6__IPU_DISPB_DAT_6,
+ MX35_PAD_LD7__IPU_DISPB_DAT_7,
+ MX35_PAD_LD8__IPU_DISPB_DAT_8,
+ MX35_PAD_LD9__IPU_DISPB_DAT_9,
+ MX35_PAD_LD10__IPU_DISPB_DAT_10,
+ MX35_PAD_LD11__IPU_DISPB_DAT_11,
+ MX35_PAD_LD12__IPU_DISPB_DAT_12,
+ MX35_PAD_LD13__IPU_DISPB_DAT_13,
+ MX35_PAD_LD14__IPU_DISPB_DAT_14,
+ MX35_PAD_LD15__IPU_DISPB_DAT_15,
+ MX35_PAD_LD16__IPU_DISPB_DAT_16,
+ MX35_PAD_LD17__IPU_DISPB_DAT_17,
+ MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+ MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+ MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+ MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+ MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+ MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+ MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+ i2c_register_board_info(0, pcm043_i2c_devices,
+ ARRAY_SIZE(pcm043_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+ mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+ .init = pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+ /* Maintainer: Pengutronix */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &pcm043_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 5a01e48..82b31c4 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -279,7 +279,7 @@
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &qong_timer,
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cd8de89..55ecc01 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -46,7 +46,6 @@
config MACH_OMAP_H3
bool "TI H3 Support"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
-# select GPIOEXPANDER_OMAP
help
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 1bda8f5..6867cd3 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -13,6 +13,10 @@
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
+# DSP
+obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
+mailbox_mach-objs := mailbox.o
+
led-y := leds.o
# Specific board support
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d1ed136..e70fc7c 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -33,8 +33,11 @@
#include <mach/common.h>
#include <mach/dsp_common.h>
#include <mach/omapfb.h>
+#include <mach/hwa742.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
#define ADS7846_PENDOWN_GPIO 15
@@ -162,6 +165,15 @@
},
};
+static struct hwa742_platform_data nokia770_hwa742_platform_data = {
+ .te_connected = 1,
+};
+
+static void hwa742_dev_init(void)
+{
+ clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
+ omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
+}
/* assume no Mini-AB port */
@@ -370,6 +382,7 @@
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap_dsp_init();
+ hwa742_dev_init();
ads7846_dev_init();
mipid_dev_init();
omap_usb_init(&nokia770_usb_config);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 336e51d..436eed2 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -776,7 +776,7 @@
arm_idlect1_mask = ~0;
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
cpu_mask = 0;
if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 9774c1f..5218943 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,11 +53,12 @@
#include <mach/clock.h>
#include <mach/sram.h>
#include <mach/tc.h>
-#include <mach/pm.h>
#include <mach/mux.h>
#include <mach/dma.h>
#include <mach/dmtimer.h>
+#include "pm.h"
+
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
@@ -101,7 +102,7 @@
* going idle we continue to do idle even if we get
* a clock tick interrupt . .
*/
-void omap_pm_idle(void)
+void omap1_pm_idle(void)
{
extern __u32 arm_idlect1_mask;
__u32 use_idlect1 = arm_idlect1_mask;
@@ -222,7 +223,7 @@
#define EN_APICK 6 /* ARM_IDLECT2 */
#define DSP_EN 1 /* ARM_RSTCT1 */
-void omap_pm_suspend(void)
+void omap1_pm_suspend(void)
{
unsigned long arg0 = 0, arg1 = 0;
@@ -610,7 +611,7 @@
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
- omap_pm_suspend();
+ omap1_pm_suspend();
break;
default:
return -EINVAL;
@@ -683,7 +684,7 @@
return -ENODEV;
}
- pm_idle = omap_pm_idle;
+ pm_idle = omap1_pm_idle;
if (cpu_is_omap730())
setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/mach-omap1/pm.h
similarity index 76%
rename from arch/arm/plat-omap/include/mach/pm.h
rename to arch/arm/mach-omap1/pm.h
index ce6ee79..9ed5e2c 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -1,7 +1,7 @@
/*
- * arch/arm/plat-omap/include/mach/pm.h
+ * arch/arm/mach-omap1/pm.h
*
- * Header file for OMAP Power Management Routines
+ * Header file for OMAP1 Power Management Routines
*
* Author: MontaVista Software, Inc.
* support@mvista.com
@@ -31,8 +31,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
+#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
+#define __ARCH_ARM_MACH_OMAP1_PM_H
/*
* ----------------------------------------------------------------------------
@@ -106,8 +106,7 @@
#if !defined(CONFIG_ARCH_OMAP730) && \
!defined(CONFIG_ARCH_OMAP15XX) && \
- !defined(CONFIG_ARCH_OMAP16XX) && \
- !defined(CONFIG_ARCH_OMAP24XX)
+ !defined(CONFIG_ARCH_OMAP16XX)
#warning "Power management for this processor not implemented yet"
#endif
@@ -115,29 +114,27 @@
#include <linux/clk.h>
+extern struct kset power_subsys;
+
extern void prevent_idle_sleep(void);
extern void allow_idle_sleep(void);
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
+extern void omap1_pm_idle(void);
+extern void omap1_pm_suspend(void);
+
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
- void __iomem *sdrc_power);
extern void omap730_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
extern unsigned int omap730_cpu_suspend_sz;
extern unsigned int omap1510_cpu_suspend_sz;
extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap730_idle_loop_suspend_sz;
extern unsigned int omap1510_idle_loop_suspend_sz;
extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
#ifdef CONFIG_OMAP_SERIAL_WAKE
extern void omap_serial_wake_trigger(int enable);
@@ -170,10 +167,6 @@
#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
/*
* List of global OMAP registers to preserve.
* More ones like CP and general purpose register values are preserved
@@ -283,63 +276,5 @@
#endif
};
-enum omap24xx_save_state {
- OMAP24XX_SLEEP_SAVE_START = 0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR1,
- OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
- OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_OE,
- OMAP24XX_SLEEP_SAVE_GPIO4_OE,
- OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
- OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
- OMAP24XX_SLEEP_SAVE_SIZE
-};
-
#endif /* ASSEMBLER */
#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 842090b..f754cee 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -26,9 +26,6 @@
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/fpga.h>
-#ifdef CONFIG_PM
-#include <mach/pm.h>
-#endif
static struct clk * uart1_ck;
static struct clk * uart2_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index f3eac93..22e8568 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -35,7 +35,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
-#include <mach/pm.h>
+#include "pm.h"
.text
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 64ab386..a755eb5 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,7 +25,7 @@
select ARCH_OMAP_OTG
comment "OMAP Board Type"
- depends on ARCH_OMAP2 || ARCH_OMAP3
+ depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
@@ -56,6 +56,10 @@
bool "Gumstix Overo board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_OMAP3EVM
+ bool "OMAP 3530 EVM board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
@@ -67,3 +71,11 @@
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_ZOOM2
+ bool "OMAP3 Zoom2 board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_4430SDP
+ bool "OMAP 4430 SDP board"
+ depends on ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index c49d9bf..6226e64d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,9 +3,14 @@
#
# Common support
-obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
- devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
- clockdomain.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+
+omap-2-3-common = irq.o sdrc.o
+prcm-common = prcm.o powerdomain.o
+clock-common = clock.o clockdomain.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
@@ -20,14 +25,21 @@
# Power Management
ifeq ($(CONFIG_PM),y)
-obj-y += pm.o
+obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
+obj-$(CONFIG_PM_DEBUG) += pm-debug.o
endif
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o
+iommu-y += iommu2.o
+iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o
+
+obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y)
+
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
@@ -40,6 +52,8 @@
mmc-twl4030.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
+ mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
@@ -48,8 +62,17 @@
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-peripherals.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
+ mmc-twl4030.o \
+ board-zoom-debugboard.o
+
+obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
# Platform specific device init code
-ifeq ($(CONFIG_USB_MUSB_SOC),y)
obj-y += usb-musb.o
-endif
+
+onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
+obj-y += $(onenand-m) $(onenand-y)
+
+smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
+obj-y += $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 2214365..9c3fdcd 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,14 +36,12 @@
#include <mach/common.h>
#include <mach/gpmc.h>
#include <mach/usb.h>
+#include <mach/gpmc-smc91x.h>
#include "mmc-twl4030.h"
#define SDP2430_CS0_BASE 0x04000000
-#define SDP2430_FLASH_CS 0
-#define SDP2430_SMC91X_CS 5
-
-#define SDP2430_ETHR_GPIO_IRQ 149
+#define SECONDARY_LCD_GPIO 147
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
@@ -99,100 +97,53 @@
.resource = &sdp2430_flash_resource,
};
-static struct resource sdp2430_smc91x_resources[] = {
- [0] = {
- .start = SDP2430_CS0_BASE,
- .end = SDP2430_CS0_BASE + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
- .end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device sdp2430_smc91x_device = {
- .name = "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+ .name = "sdp2430_lcd",
.id = -1,
- .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources),
- .resource = sdp2430_smc91x_resources,
};
static struct platform_device *sdp2430_devices[] __initdata = {
- &sdp2430_smc91x_device,
&sdp2430_flash_device,
+ &sdp2430_lcd_device,
};
-static inline void __init sdp2430_init_smc91x(void)
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 5,
+ .gpio_irq = 149,
+ .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+ IORESOURCE_IRQ_LOWLEVEL,
+
+};
+
+static void __init board_smc91x_init(void)
{
- int eth_cs;
- unsigned long cs_mem_base;
- unsigned int rate;
- struct clk *gpmc_fck;
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ board_smc91x_data.gpio_irq = 6;
+ else
+ board_smc91x_data.gpio_irq = 29;
- eth_cs = SDP2430_SMC91X_CS;
-
- gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
- if (IS_ERR(gpmc_fck)) {
- WARN_ON(1);
- return;
- }
-
- clk_enable(gpmc_fck);
- rate = clk_get_rate(gpmc_fck);
-
- /* Make sure CS1 timings are correct, for 2430 always muxed */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
- if (rate >= 160000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else if (rate >= 130000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else { /* rate = 100000000 */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
- }
-
- if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- goto out;
- }
-
- sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
- sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
- udelay(100);
-
- if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- SDP2430_ETHR_GPIO_IRQ);
- gpmc_cs_free(eth_cs);
- goto out;
- }
- gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
-
-out:
- clk_disable(gpmc_fck);
- clk_put(gpmc_fck);
+ gpmc_smc91x_init(&board_smc91x_data);
}
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
static void __init omap_2430sdp_init_irq(void)
{
omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
- sdp2430_init_smc91x();
}
static struct omap_uart_config sdp2430_uart_config __initdata = {
@@ -201,6 +152,7 @@
static struct omap_board_config_kernel sdp2430_config[] = {
{OMAP_TAG_UART, &sdp2430_uart_config},
+ {OMAP_TAG_LCD, &sdp2430_lcd_config},
};
@@ -248,6 +200,8 @@
static void __init omap_2430sdp_init(void)
{
+ int ret;
+
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -256,6 +210,12 @@
omap_serial_init();
twl4030_mmc_init(mmc);
usb_musb_init();
+ board_smc91x_init();
+
+ /* Turn off secondary LCD backlight */
+ ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+ if (ret == 0)
+ gpio_direction_output(SECONDARY_LCD_GPIO, 0);
}
static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ed92749..496a90e 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -39,15 +39,13 @@
#include <mach/control.h>
#include <mach/keypad.h>
+#include <mach/gpmc-smc91x.h>
+#include "sdram-qimonda-hyb18m512160af-6.h"
#include "mmc-twl4030.h"
#define CONFIG_DISABLE_HFCLK 1
-#define SDP3430_ETHR_GPIO_IRQ_SDPV1 29
-#define SDP3430_ETHR_GPIO_IRQ_SDPV2 6
-#define SDP3430_SMC91X_CS 3
-
#define SDP3430_TS_GPIO_IRQ_SDPV1 3
#define SDP3430_TS_GPIO_IRQ_SDPV2 2
@@ -56,24 +54,6 @@
#define TWL4030_MSECURE_GPIO 22
-static struct resource sdp3430_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device sdp3430_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(sdp3430_smc91x_resources),
- .resource = sdp3430_smc91x_resources,
-};
-
static int sdp3430_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -184,48 +164,14 @@
};
static struct platform_device *sdp3430_devices[] __initdata = {
- &sdp3430_smc91x_device,
&sdp3430_lcd_device,
};
-static inline void __init sdp3430_init_smc91x(void)
-{
- int eth_cs;
- unsigned long cs_mem_base;
- int eth_gpio = 0;
-
- eth_cs = SDP3430_SMC91X_CS;
-
- if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- return;
- }
-
- sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
- sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
- udelay(100);
-
- if (omap_rev() > OMAP3430_REV_ES1_0)
- eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
- else
- eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
-
- sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
-
- if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- eth_gpio);
- return;
- }
- gpio_direction_input(eth_gpio);
-}
-
static void __init omap_3430sdp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(hyb18m512160af6_sdrc_params);
omap_init_irq();
omap_gpio_init();
- sdp3430_init_smc91x();
}
static struct omap_uart_config sdp3430_uart_config __initdata = {
@@ -506,6 +452,32 @@
return 0;
}
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 3,
+ .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+ IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ board_smc91x_data.gpio_irq = 6;
+ else
+ board_smc91x_data.gpio_irq = 29;
+
+ gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
static void __init omap_3430sdp_init(void)
{
omap3430_i2c_init();
@@ -522,6 +494,7 @@
ads7846_dev_init();
omap_serial_init();
usb_musb_init();
+ board_smc91x_init();
}
static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
new file mode 100644
index 0000000..57e477b
--- /dev/null
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -0,0 +1,94 @@
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+ .name = "sdp4430_lcd",
+ .id = -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+ &sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+ .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+ { OMAP_TAG_UART, &sdp4430_uart_config },
+ { OMAP_TAG_LCD, &sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+ gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(1);
+#endif
+ gic_init_irq();
+ omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+ platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+ omap_board_config = sdp4430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+ omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+ omap2_set_globals_443x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+ /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_4430sdp_map_io,
+ .init_irq = omap_4430sdp_init_irq,
+ .init_machine = omap_4430sdp_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index da57b0f..d8bc0a7 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,11 +16,13 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
@@ -39,6 +41,7 @@
#include <asm/delay.h>
#include <mach/control.h>
#include <mach/usb.h>
+#include <mach/keypad.h>
#include "mmc-twl4030.h"
@@ -77,8 +80,163 @@
},
};
-static struct platform_device *ldp_devices[] __initdata = {
- &ldp_smsc911x_device,
+static int ldp_twl4030_keymap[] = {
+ KEY(0, 0, KEY_1),
+ KEY(1, 0, KEY_2),
+ KEY(2, 0, KEY_3),
+ KEY(0, 1, KEY_4),
+ KEY(1, 1, KEY_5),
+ KEY(2, 1, KEY_6),
+ KEY(3, 1, KEY_F5),
+ KEY(0, 2, KEY_7),
+ KEY(1, 2, KEY_8),
+ KEY(2, 2, KEY_9),
+ KEY(3, 2, KEY_F6),
+ KEY(0, 3, KEY_F7),
+ KEY(1, 3, KEY_0),
+ KEY(2, 3, KEY_F8),
+ PERSISTENT_KEY(4, 5),
+ KEY(4, 4, KEY_VOLUMEUP),
+ KEY(5, 5, KEY_VOLUMEDOWN),
+ 0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+ .rows = 6,
+ .cols = 6,
+ .keymap = ldp_twl4030_keymap,
+ .keymapsize = ARRAY_SIZE(ldp_twl4030_keymap),
+ .rep = 1,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+ [0] = {
+ .code = KEY_ENTER,
+ .gpio = 101,
+ .desc = "enter sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [1] = {
+ .code = KEY_F1,
+ .gpio = 102,
+ .desc = "func 1",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [2] = {
+ .code = KEY_F2,
+ .gpio = 103,
+ .desc = "func 2",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [3] = {
+ .code = KEY_F3,
+ .gpio = 104,
+ .desc = "func 3",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [4] = {
+ .code = KEY_F4,
+ .gpio = 105,
+ .desc = "func 4",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [5] = {
+ .code = KEY_LEFT,
+ .gpio = 106,
+ .desc = "left sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [6] = {
+ .code = KEY_RIGHT,
+ .gpio = 107,
+ .desc = "right sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [7] = {
+ .code = KEY_UP,
+ .gpio = 108,
+ .desc = "up sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [8] = {
+ .code = KEY_DOWN,
+ .gpio = 109,
+ .desc = "down sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+ .buttons = ldp_gpio_keys_buttons,
+ .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons),
+ .rep = 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &ldp_gpio_keys,
+ },
+};
+
+static int ts_gpio;
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
+ printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+ return;
+ }
+
+ gpio_direction_input(ts_gpio);
+ omap_set_gpio_debounce(ts_gpio, 1);
+ omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+};
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+ [0] = {
+ /*
+ * TSC2046 operates at a max freqency of 2MHz, so
+ * operate slightly below at 1.5MHz
+ */
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &tsc2046_mcspi_config,
+ .irq = 0,
+ .platform_data = &tsc2046_config,
+ },
};
static inline void __init ldp_init_smsc911x(void)
@@ -122,8 +280,22 @@
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct platform_device ldp_lcd_device = {
+ .name = "ldp_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
static struct omap_board_config_kernel ldp_config[] __initdata = {
{ OMAP_TAG_UART, &ldp_uart_config },
+ { OMAP_TAG_LCD, &ldp_lcd_config },
+};
+
+static struct twl4030_usb_data ldp_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data ldp_gpio_data = {
@@ -132,12 +304,39 @@
.irq_end = TWL4030_GPIO_IRQ_END,
};
+static struct twl4030_madc_platform_data ldp_madc_data = {
+ .irq_line = 1,
+};
+
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ldp_vmmc1_supply,
+};
+
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
+ .madc = &ldp_madc_data,
+ .usb = &ldp_usb_data,
+ .vmmc1 = &ldp_vmmc1,
.gpio = &ldp_gpio_data,
+ .keypad = &ldp_kp_twl4030_data,
};
static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
@@ -168,15 +367,29 @@
{} /* Terminator */
};
+static struct platform_device *ldp_devices[] __initdata = {
+ &ldp_smsc911x_device,
+ &ldp_lcd_device,
+ &ldp_gpio_keys_device,
+};
+
static void __init omap_ldp_init(void)
{
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
+ ts_gpio = 54;
+ ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+ spi_register_board_info(ldp_spi_board_info,
+ ARRAY_SIZE(ldp_spi_board_info));
+ ads7846_dev_init();
omap_serial_init();
- twl4030_mmc_init(mmc);
usb_musb_init();
+
+ twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ ldp_vmmc1_supply.dev = mmc[0].dev;
}
static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3a7a29d..991ac9c 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <mach/hardware.h>
@@ -105,6 +106,8 @@
.resource = &omap3beagle_nand_resource,
};
+#include "sdram-micron-mt46h32m32lf-6.h"
+
static struct omap_uart_config omap3_beagle_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
@@ -118,6 +121,23 @@
{} /* Terminator */
};
+static struct platform_device omap3_beagle_lcd_device = {
+ .name = "omap3beagle_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct regulator_consumer_supply beagle_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply beagle_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
@@ -128,6 +148,10 @@
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ beagle_vmmc1_supply.dev = mmc[0].dev;
+ beagle_vsim_supply.dev = mmc[0].dev;
+
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
@@ -156,12 +180,85 @@
.setup = beagle_twl_gpio_setup,
};
+static struct regulator_consumer_supply beagle_vdac_supply = {
+ .supply = "vdac",
+ .dev = &omap3_beagle_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply beagle_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &omap3_beagle_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data beagle_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data beagle_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data beagle_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data beagle_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vdvi_supply,
+};
+
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.gpio = &beagle_gpio_data,
+ .vmmc1 = &beagle_vmmc1,
+ .vsim = &beagle_vsim,
+ .vdac = &beagle_vdac,
+ .vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
@@ -185,7 +282,7 @@
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
@@ -193,15 +290,6 @@
omap_gpio_init();
}
-static struct platform_device omap3_beagle_lcd_device = {
- .name = "omap3beagle_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static struct gpio_led gpio_leds[] = {
{
.name = "beagleboard::usr0",
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
new file mode 100644
index 0000000..d3cc145
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -0,0 +1,329 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO 175
+
+#define OMAP3EVM_ETHR_START 0x2c000000
+#define OMAP3EVM_ETHR_SIZE 1024
+#define OMAP3EVM_ETHR_GPIO_IRQ 176
+#define OMAP3EVM_SMC911X_CS 5
+
+static struct resource omap3evm_smc911x_resources[] = {
+ [0] = {
+ .start = OMAP3EVM_ETHR_START,
+ .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap3evm_smc911x_resources),
+ .resource = &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+ int eth_cs;
+ struct clk *l3ck;
+ unsigned int rate;
+
+ eth_cs = OMAP3EVM_SMC911X_CS;
+
+ l3ck = clk_get(NULL, "l3_ck");
+ if (IS_ERR(l3ck))
+ rate = 100000000;
+ else
+ rate = clk_get_rate(l3ck);
+
+ if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+ OMAP3EVM_ETHR_GPIO_IRQ);
+ return;
+ }
+
+ gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = 63,
+ },
+ {} /* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "omap3evm::ledb",
+ /* normally not visible (board underside) */
+ .default_trigger = "default-on",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ omap_cfg_reg(L8_34XX_GPIO63);
+ mmc[0].gpio_cd = gpio + 0;
+ twl4030_mmc_init(mmc);
+
+ /*
+ * Most GPIOs are for USB OTG. Some are mostly sent to
+ * the P2 connector; notably LEDA for the LCD backlight.
+ */
+
+ /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ platform_device_register(&leds_gpio);
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .setup = omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+ KEY(0, 0, KEY_LEFT),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_A),
+ KEY(0, 3, KEY_B),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_UP),
+ KEY(1, 2, KEY_E),
+ KEY(1, 3, KEY_F),
+ KEY(2, 0, KEY_ENTER),
+ KEY(2, 1, KEY_I),
+ KEY(2, 2, KEY_J),
+ KEY(2, 3, KEY_K),
+ KEY(3, 0, KEY_M),
+ KEY(3, 1, KEY_N),
+ KEY(3, 2, KEY_O),
+ KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+ .rows = 4,
+ .cols = 4,
+ .keymap = omap3evm_keymap,
+ .keymapsize = ARRAY_SIZE(omap3evm_keymap),
+ .rep = 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+ .irq_line = 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .keypad = &omap3evm_kp_data,
+ .madc = &omap3evm_madc_data,
+ .usb = &omap3evm_usb_data,
+ .gpio = &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &omap3evm_twldata,
+ },
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+ ARRAY_SIZE(omap3evm_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+ .name = "omap3evm_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+ printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+ gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+ omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+ omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+ .settle_delay_usecs = 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+ [0] = {
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+ .platform_data = &ads7846_config,
+ },
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+ omap_gpio_init();
+ omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+ { OMAP_TAG_UART, &omap3_evm_uart_config },
+ { OMAP_TAG_LCD, &omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+ &omap3_evm_lcd_device,
+ &omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+ omap3_evm_i2c_init();
+
+ platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+ omap_board_config = omap3_evm_config;
+ omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+ spi_register_board_info(omap3evm_spi_board_info,
+ ARRAY_SIZE(omap3evm_spi_board_info));
+
+ omap_serial_init();
+ usb_musb_init();
+ ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+ /* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_evm_map_io,
+ .init_irq = omap3_evm_init_irq,
+ .init_machine = omap3_evm_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 402f09c..e32aa23 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -23,7 +23,11 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -35,11 +39,154 @@
#include <mach/hardware.h>
#include <mach/mcspi.h>
#include <mach/usb.h>
+#include <mach/keypad.h>
+#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
#define OMAP3_PANDORA_TS_GPIO 94
+/* hardware debounce: (value + 1) * 31us */
+#define GPIO_DEBOUNCE_TIME 127
+
+static struct gpio_led pandora_gpio_leds[] = {
+ {
+ .name = "pandora::sd1",
+ .default_trigger = "mmc0",
+ .gpio = 128,
+ }, {
+ .name = "pandora::sd2",
+ .default_trigger = "mmc1",
+ .gpio = 129,
+ }, {
+ .name = "pandora::bluetooth",
+ .gpio = 158,
+ }, {
+ .name = "pandora::wifi",
+ .gpio = 159,
+ },
+};
+
+static struct gpio_led_platform_data pandora_gpio_led_data = {
+ .leds = pandora_gpio_leds,
+ .num_leds = ARRAY_SIZE(pandora_gpio_leds),
+};
+
+static struct platform_device pandora_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_gpio_led_data,
+ },
+};
+
+#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \
+{ \
+ .gpio = gpio_num, \
+ .type = ev_type, \
+ .code = ev_code, \
+ .active_low = act_low, \
+ .desc = "btn " descr, \
+}
+
+#define GPIO_BUTTON_LOW(gpio_num, event_code, description) \
+ GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
+
+static struct gpio_keys_button pandora_gpio_keys[] = {
+ GPIO_BUTTON_LOW(110, KEY_UP, "up"),
+ GPIO_BUTTON_LOW(103, KEY_DOWN, "down"),
+ GPIO_BUTTON_LOW(96, KEY_LEFT, "left"),
+ GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"),
+ GPIO_BUTTON_LOW(111, BTN_A, "a"),
+ GPIO_BUTTON_LOW(106, BTN_B, "b"),
+ GPIO_BUTTON_LOW(109, BTN_X, "x"),
+ GPIO_BUTTON_LOW(101, BTN_Y, "y"),
+ GPIO_BUTTON_LOW(102, BTN_TL, "l"),
+ GPIO_BUTTON_LOW(97, BTN_TL2, "l2"),
+ GPIO_BUTTON_LOW(105, BTN_TR, "r"),
+ GPIO_BUTTON_LOW(107, BTN_TR2, "r2"),
+ GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"),
+ GPIO_BUTTON_LOW(99, KEY_MENU, "menu"),
+ GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"),
+ GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
+ GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
+};
+
+static struct gpio_keys_platform_data pandora_gpio_key_info = {
+ .buttons = pandora_gpio_keys,
+ .nbuttons = ARRAY_SIZE(pandora_gpio_keys),
+};
+
+static struct platform_device pandora_keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_gpio_key_info,
+ },
+};
+
+static void __init pandora_keys_gpio_init(void)
+{
+ /* set debounce time for GPIO banks 4 and 6 */
+ omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
+ omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+}
+
+static int pandora_keypad_map[] = {
+ /* col, row, code */
+ KEY(0, 0, KEY_9),
+ KEY(0, 1, KEY_0),
+ KEY(0, 2, KEY_BACKSPACE),
+ KEY(0, 3, KEY_O),
+ KEY(0, 4, KEY_P),
+ KEY(0, 5, KEY_K),
+ KEY(0, 6, KEY_L),
+ KEY(0, 7, KEY_ENTER),
+ KEY(1, 0, KEY_8),
+ KEY(1, 1, KEY_7),
+ KEY(1, 2, KEY_6),
+ KEY(1, 3, KEY_5),
+ KEY(1, 4, KEY_4),
+ KEY(1, 5, KEY_3),
+ KEY(1, 6, KEY_2),
+ KEY(1, 7, KEY_1),
+ KEY(2, 0, KEY_I),
+ KEY(2, 1, KEY_U),
+ KEY(2, 2, KEY_Y),
+ KEY(2, 3, KEY_T),
+ KEY(2, 4, KEY_R),
+ KEY(2, 5, KEY_E),
+ KEY(2, 6, KEY_W),
+ KEY(2, 7, KEY_Q),
+ KEY(3, 0, KEY_J),
+ KEY(3, 1, KEY_H),
+ KEY(3, 2, KEY_G),
+ KEY(3, 3, KEY_F),
+ KEY(3, 4, KEY_D),
+ KEY(3, 5, KEY_S),
+ KEY(3, 6, KEY_A),
+ KEY(3, 7, KEY_LEFTSHIFT),
+ KEY(4, 0, KEY_N),
+ KEY(4, 1, KEY_B),
+ KEY(4, 2, KEY_V),
+ KEY(4, 3, KEY_C),
+ KEY(4, 4, KEY_X),
+ KEY(4, 5, KEY_Z),
+ KEY(4, 6, KEY_DOT),
+ KEY(4, 7, KEY_COMMA),
+ KEY(5, 0, KEY_M),
+ KEY(5, 1, KEY_SPACE),
+ KEY(5, 2, KEY_FN),
+};
+
+static struct twl4030_keypad_data pandora_kp_data = {
+ .rows = 8,
+ .cols = 6,
+ .keymap = pandora_keypad_map,
+ .keymapsize = ARRAY_SIZE(pandora_keypad_map),
+ .rep = 1,
+};
+
static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
@@ -69,6 +216,14 @@
.enabled_uarts = (1 << 2), /* UART3 */
};
+static struct regulator_consumer_supply pandora_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply pandora_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
static int omap3pandora_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -77,6 +232,10 @@
omap3pandora_mmc[1].gpio_cd = gpio + 1;
twl4030_mmc_init(omap3pandora_mmc);
+ /* link regulators to MMC adapters */
+ pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
+ pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+
return 0;
}
@@ -87,6 +246,36 @@
.setup = omap3pandora_twl_gpio_setup,
};
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data pandora_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
+static struct regulator_init_data pandora_vmmc2 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vmmc2_supply,
+};
+
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
@@ -96,6 +285,9 @@
.irq_end = TWL4030_IRQ_END,
.gpio = &omap3pandora_gpio_data,
.usb = &omap3pandora_usb_data,
+ .vmmc1 = &pandora_vmmc1,
+ .vmmc2 = &pandora_vmmc2,
+ .keypad = &pandora_kp_data,
};
static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
@@ -118,7 +310,7 @@
static void __init omap3pandora_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
@@ -188,6 +380,8 @@
static struct platform_device *omap3pandora_devices[] __initdata = {
&omap3pandora_lcd_device,
+ &pandora_leds_gpio,
+ &pandora_keys_gpio,
};
static void __init omap3pandora_init(void)
@@ -201,6 +395,7 @@
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap3pandora_ads7846_init();
+ pandora_keys_gpio_init();
usb_musb_init();
}
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b1f23be..dff5528 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -27,6 +27,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -45,6 +46,7 @@
#include <mach/nand.h>
#include <mach/usb.h>
+#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
#define OVERO_GPIO_BT_XGATE 15
@@ -271,21 +273,76 @@
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {
+ .mmc = 2,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .transceiver = true,
+ .ocr_mask = 0x00100000, /* 3.3V */
+ },
+ {} /* Terminator */
+};
+
+static struct regulator_consumer_supply overo_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static int overo_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ twl4030_mmc_init(mmc);
+
+ overo_vmmc1_supply.dev = mmc[0].dev;
+
+ return 0;
+}
+
static struct twl4030_gpio_platform_data overo_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
+ .setup = overo_twl_gpio_setup,
};
+static struct twl4030_usb_data overo_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct regulator_init_data overo_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &overo_vmmc1_supply,
+};
+
+/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
+ .usb = &overo_usb_data,
+ .vmmc1 = &overo_vmmc1,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
{
- I2C_BOARD_INFO("twl4030", 0x48),
+ I2C_BOARD_INFO("tps65950", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &overo_twldata,
@@ -303,7 +360,7 @@
static void __init overo_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
@@ -326,23 +383,6 @@
&overo_lcd_device,
};
-static struct twl4030_hsmmc_info mmc[] __initdata = {
- {
- .mmc = 1,
- .wires = 4,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- },
- {
- .mmc = 2,
- .wires = 4,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .transceiver = true,
- },
- {} /* Terminator */
-};
-
static void __init overo_init(void)
{
overo_i2c_init();
@@ -350,7 +390,6 @@
omap_board_config = overo_config;
omap_board_config_size = ARRAY_SIZE(overo_config);
omap_serial_init();
- twl4030_mmc_init(mmc);
overo_flash_init();
usb_musb_init();
overo_ads7846_init();
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index a738172..da93b86 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,30 +27,13 @@
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/keypad.h>
+#include <mach/onenand.h>
+#include <mach/gpmc-smc91x.h>
#include "mmc-twl4030.h"
-
-#define SMC91X_CS 1
-#define SMC91X_GPIO_IRQ 54
-#define SMC91X_GPIO_RESET 164
-#define SMC91X_GPIO_PWRDWN 86
-
-static struct resource rx51_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device rx51_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(rx51_smc91x_resources),
- .resource = rx51_smc91x_resources,
-};
+#define SYSTEM_REV_B_USES_VAUX3 0x1699
+#define SYSTEM_REV_S_USES_VAUX3 0x8
static int rx51_keymap[] = {
KEY(0, 0, KEY_Q),
@@ -107,98 +90,6 @@
.rep = 1,
};
-static struct platform_device *rx51_peripherals_devices[] = {
- &rx51_smc91x_device,
-};
-
-/*
- * Timings are taken from smsc-lan91c96-ms.pdf
- */
-static int smc91x_init_gpmc(int cs)
-{
- struct gpmc_timings t;
- const int t2_r = 45; /* t2 in Figure 12.10 */
- const int t2_w = 30; /* t2 in Figure 12.11 */
- const int t3 = 15; /* t3 in Figure 12.10 */
- const int t5_r = 0; /* t5 in Figure 12.10 */
- const int t6_r = 45; /* t6 in Figure 12.10 */
- const int t6_w = 0; /* t6 in Figure 12.11 */
- const int t7_w = 15; /* t7 in Figure 12.11 */
- const int t15 = 12; /* t15 in Figure 12.2 */
- const int t20 = 185; /* t20 in Figure 12.2 */
-
- memset(&t, 0, sizeof(t));
-
- t.cs_on = t15;
- t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */
- t.adv_on = t3; /* Figure 12.10 */
- t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */
- t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */
- t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */
- t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */
- t.we_on = t.we_off - t7_w; /* Figure 12.11 */
- t.rd_cycle = t20; /* Figure 12.2 */
- t.wr_cycle = t20; /* Figure 12.4 */
- t.access = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */
-
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
-
- return gpmc_cs_set_timings(cs, &t);
-}
-
-static void __init rx51_init_smc91x(void)
-{
- unsigned long cs_mem_base;
- int ret;
-
- omap_cfg_reg(U8_34XX_GPIO54_DOWN);
- omap_cfg_reg(G25_34XX_GPIO86_OUT);
- omap_cfg_reg(H19_34XX_GPIO164_OUT);
-
- if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- return;
- }
-
- rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
- rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
-
- smc91x_init_gpmc(SMC91X_CS);
-
- if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
- goto free1;
-
- gpio_direction_input(SMC91X_GPIO_IRQ);
- rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
-
- ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
- if (ret)
- goto free2;
- gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
-
- ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
- if (ret)
- goto free3;
- gpio_direction_output(SMC91X_GPIO_RESET, 0);
- gpio_set_value(SMC91X_GPIO_RESET, 1);
- msleep(100);
- gpio_set_value(SMC91X_GPIO_RESET, 0);
-
- return;
-
-free3:
- gpio_free(SMC91X_GPIO_PWRDWN);
-free2:
- gpio_free(SMC91X_GPIO_IRQ);
-free1:
- gpmc_cs_free(SMC91X_CS);
-
- printk(KERN_ERR "Could not initialize smc91x\n");
-}
-
static struct twl4030_madc_platform_data rx51_madc_data = {
.irq_line = 1,
};
@@ -259,7 +150,7 @@
};
/* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3 = {
+static struct regulator_init_data rx51_vaux3_cam = {
.constraints = {
.name = "VCAM_DIG_18",
.min_uV = 1800000,
@@ -272,6 +163,22 @@
},
};
+static struct regulator_init_data rx51_vaux3_mmc = {
+ .constraints = {
+ .name = "VMMC2_30",
+ .min_uV = 2800000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vmmc2_supply,
+};
+
static struct regulator_init_data rx51_vaux4 = {
.constraints = {
.name = "VCAM_ANA_28",
@@ -382,10 +289,8 @@
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
- .vaux3 = &rx51_vaux3,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
- .vmmc2 = &rx51_vmmc2,
.vsim = &rx51_vsim,
.vdac = &rx51_vdac,
};
@@ -401,6 +306,13 @@
static int __init rx51_i2c_init(void)
{
+ if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
+ system_rev >= SYSTEM_REV_B_USES_VAUX3)
+ rx51_twldata.vaux3 = &rx51_vaux3_mmc;
+ else {
+ rx51_twldata.vaux3 = &rx51_vaux3_cam;
+ rx51_twldata.vmmc2 = &rx51_vmmc2;
+ }
omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
omap_register_i2c_bus(2, 100, NULL, 0);
@@ -408,12 +320,94 @@
return 0;
}
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 0x20000,
+ .mask_flags = MTD_WRITEABLE, /* Force read-only */
+ },
+ {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x60000,
+ },
+ {
+ .name = "log",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x40000,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x200000,
+ },
+ {
+ .name = "initfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x200000,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+ .cs = 0,
+ .gpio_irq = 65,
+ .parts = onenand_partitions,
+ .nr_parts = ARRAY_SIZE(onenand_partitions),
+};
+
+static void __init board_onenand_init(void)
+{
+ gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 1,
+ .gpio_irq = 54,
+ .gpio_pwrdwn = 86,
+ .gpio_reset = 164,
+ .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+ omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+ omap_cfg_reg(G25_34XX_GPIO86_OUT);
+ omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+ gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
void __init rx51_peripherals_init(void)
{
- platform_add_devices(rx51_peripherals_devices,
- ARRAY_SIZE(rx51_peripherals_devices));
rx51_i2c_init();
- rx51_init_smc91x();
+ board_onenand_init();
+ board_smc91x_init();
}
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
new file mode 100644
index 0000000..bac5c43
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+
+#include <mach/gpmc.h>
+
+#define ZOOM2_SMSC911X_CS 7
+#define ZOOM2_SMSC911X_GPIO 158
+#define ZOOM2_QUADUART_CS 3
+#define ZOOM2_QUADUART_GPIO 102
+#define QUART_CLK 1843200
+#define DEBUG_BASE 0x08000000
+#define ZOOM2_ETHR_START DEBUG_BASE
+
+static struct resource zoom2_smsc911x_resources[] = {
+ [0] = {
+ .start = ZOOM2_ETHR_START,
+ .end = ZOOM2_ETHR_START + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config zoom2_smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device zoom2_smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(zoom2_smsc911x_resources),
+ .resource = zoom2_smsc911x_resources,
+ .dev = {
+ .platform_data = &zoom2_smsc911x_config,
+ },
+};
+
+static inline void __init zoom2_init_smsc911x(void)
+{
+ int eth_cs;
+ unsigned long cs_mem_base;
+ int eth_gpio = 0;
+
+ eth_cs = ZOOM2_SMSC911X_CS;
+
+ if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
+ return;
+ }
+
+ zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+ zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff;
+
+ eth_gpio = ZOOM2_SMSC911X_GPIO;
+
+ zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+ if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
+ eth_gpio);
+ return;
+ }
+ gpio_direction_input(eth_gpio);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .mapbase = 0x10000000,
+ .irq = OMAP_GPIO_IRQ(102),
+ .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = QUART_CLK,
+ }, {
+ .flags = 0
+ }
+};
+
+static struct platform_device zoom2_debugboard_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+static inline void __init zoom2_init_quaduart(void)
+{
+ int quart_cs;
+ unsigned long cs_mem_base;
+ int quart_gpio = 0;
+
+ quart_cs = ZOOM2_QUADUART_CS;
+
+ if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem"
+ "for Quad UART(TL16CP754C)\n");
+ return;
+ }
+
+ quart_gpio = ZOOM2_QUADUART_GPIO;
+
+ if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
+ quart_gpio);
+ return;
+ }
+ gpio_direction_input(quart_gpio);
+}
+
+static inline int omap_zoom2_debugboard_detect(void)
+{
+ int debug_board_detect = 0;
+
+ debug_board_detect = ZOOM2_SMSC911X_GPIO;
+
+ if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+ "board detect\n", debug_board_detect);
+ return 0;
+ }
+ gpio_direction_input(debug_board_detect);
+
+ if (!gpio_get_value(debug_board_detect)) {
+ gpio_free(debug_board_detect);
+ return 0;
+ }
+ return 1;
+}
+
+static struct platform_device *zoom2_devices[] __initdata = {
+ &zoom2_smsc911x_device,
+ &zoom2_debugboard_serial_device,
+};
+
+int __init omap_zoom2_debugboard_init(void)
+{
+ if (!omap_zoom2_debugboard_detect())
+ return 0;
+
+ zoom2_init_smsc911x();
+ zoom2_init_quaduart();
+ return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
new file mode 100644
index 0000000..bcc0f76
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * Modified from mach-omap2/board-ldp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/usb.h>
+
+#include "mmc-twl4030.h"
+
+static void __init omap_zoom2_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static struct omap_uart_config zoom2_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+ { OMAP_TAG_UART, &zoom2_uart_config },
+};
+
+static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data zoom2_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .gpio = &zoom2_gpio_data,
+};
+
+static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &zoom2_twldata,
+ },
+};
+
+static int __init omap_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
+ ARRAY_SIZE(zoom2_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+
+extern int __init omap_zoom2_debugboard_init(void);
+
+static void __init omap_zoom2_init(void)
+{
+ omap_i2c_init();
+ omap_board_config = zoom2_config;
+ omap_board_config_size = ARRAY_SIZE(zoom2_config);
+ omap_serial_init();
+ omap_zoom2_debugboard_init();
+ twl4030_mmc_init(mmc);
+ usb_musb_init();
+}
+
+static void __init omap_zoom2_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_zoom2_map_io,
+ .init_irq = omap_zoom2_init_irq,
+ .init_machine = omap_zoom2_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 4247a15..ba528f8 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -91,9 +91,9 @@
return;
prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
/* OCP barrier */
- prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
}
/*
@@ -547,8 +547,8 @@
const struct clksel_rate *clkr;
u32 last_div = 0;
- printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
- clk->name, target_rate);
+ pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+ clk->name, target_rate);
*new_div = 1;
@@ -562,7 +562,7 @@
/* Sanity check */
if (clkr->div <= last_div)
- printk(KERN_ERR "clock: clksel_rate table not sorted "
+ pr_err("clock: clksel_rate table not sorted "
"for clock %s", clk->name);
last_div = clkr->div;
@@ -574,7 +574,7 @@
}
if (!clkr->div) {
- printk(KERN_ERR "clock: Could not find divisor for target "
+ pr_err("clock: Could not find divisor for target "
"rate %ld for clock %s parent %s\n", target_rate,
clk->name, clk->parent->name);
return ~0;
@@ -582,8 +582,8 @@
*new_div = clkr->div;
- printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
- (clk->parent->rate / clkr->div));
+ pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+ (clk->parent->rate / clkr->div));
return (clk->parent->rate / clkr->div);
}
@@ -1035,7 +1035,7 @@
if ((regval32 & (1 << clk->enable_bit)) == v)
return;
- printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+ printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
if (cpu_is_omap34xx()) {
omap2_clk_enable(clk);
omap2_clk_disable(clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index e4cef33..44de027 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -233,6 +233,8 @@
static struct clk *vclk;
static struct clk *sclk;
+static void __iomem *prcm_clksrc_ctrl;
+
/*-------------------------------------------------------------------------
* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
@@ -269,10 +271,9 @@
{
u32 pcc;
- pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ pcc = __raw_readl(prcm_clksrc_ctrl);
- __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
- OMAP24XX_PRCM_CLKSRC_CTRL);
+ __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
return 0;
}
@@ -281,10 +282,9 @@
{
u32 pcc;
- pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ pcc = __raw_readl(prcm_clksrc_ctrl);
- __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
- OMAP24XX_PRCM_CLKSRC_CTRL);
+ __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
}
static const struct clkops clkops_oscck = {
@@ -654,7 +654,7 @@
{
u32 div;
- div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ div = __raw_readl(prcm_clksrc_ctrl);
div &= OMAP_SYSCLKDIV_MASK;
div >>= OMAP_SYSCLKDIV_SHIFT;
@@ -714,15 +714,18 @@
struct omap_clk *c;
u32 clkrate;
- if (cpu_is_omap242x())
+ if (cpu_is_omap242x()) {
+ prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_242X;
- else if (cpu_is_omap2430())
+ } else if (cpu_is_omap2430()) {
+ prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_243X;
+ }
clk_init(&omap2_clk_functions);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88c5acb..458f00c 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,6 +24,17 @@
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
static unsigned long omap2_table_mpu_recalc(struct clk *clk);
static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ba05aa4..9e43fe5 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -129,6 +129,9 @@
CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2),
CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2),
CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1),
+ CLK(NULL, "modem_fck", &modem_fck, CK_343X),
+ CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X),
+ CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X),
CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X),
CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X),
CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2),
@@ -281,6 +284,8 @@
#define MAX_DPLL_WAIT_TRIES 1000000
+#define MIN_SDRC_DLL_LOCK_FREQ 83000000
+
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
@@ -703,6 +708,7 @@
static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
{
u32 new_div = 0;
+ u32 unlock_dll = 0;
unsigned long validrate, sdrcrate;
struct omap_sdrc_params *sp;
@@ -729,17 +735,22 @@
if (!sp)
return -EINVAL;
- pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
- validrate);
- pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
- sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+ if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+ pr_debug("clock: will unlock SDRC DLL\n");
+ unlock_dll = 1;
+ }
+
+ pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+ validrate);
+ pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
+ sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
/* REVISIT: SRAM code doesn't support other M2 divisors yet */
WARN_ON(new_div != 1 && new_div != 2);
/* REVISIT: Add SDRC_MR changing to this code also */
omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
- sp->actim_ctrlb, new_div);
+ sp->actim_ctrlb, new_div, unlock_dll);
return 0;
}
@@ -956,7 +967,7 @@
clk_init(&omap2_clk_functions);
for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
if (c->cpu & cpu_clkflg) {
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 017a30e..e433aec 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,6 +27,8 @@
#include "prm.h"
#include "prm-regbits-34xx.h"
+#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR
+
static unsigned long omap3_dpll_recalc(struct clk *clk);
static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
static void omap3_dpll_allow_idle(struct clk *clk);
@@ -1228,6 +1230,37 @@
.recalc = &followparent_recalc,
};
+static struct clk modem_fck = {
+ .name = "modem_fck",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &sys_ck,
+ .init = &omap2_init_clk_clkdm,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_MODEM_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+ .name = "sad2d_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_SAD2D_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+ .name = "mad2d_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+ .enable_bit = OMAP3430_EN_MAD2D_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
static const struct clksel omap343x_gpt_clksel[] = {
{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
{ .parent = &sys_ck, .rates = gpt_sys_rates },
@@ -1945,8 +1978,6 @@
.recalc = &omap2_clksel_recalc,
};
-/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
-
/* SECURITY_L4_ICK2 based clocks */
static struct clk security_l4_ick2 = {
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 281d5da..fe319ae 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -195,7 +195,7 @@
static struct clockdomain d2d_clkdm = {
.name = "d2d_clkdm",
.pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6f3f5a3..6923deb 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -145,6 +145,8 @@
#define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0)
/* CM_FCLKEN1_CORE specific bits */
+#define OMAP3430_EN_MODEM (1 << 31)
+#define OMAP3430_EN_MODEM_SHIFT 31
/* CM_ICLKEN1_CORE specific bits */
#define OMAP3430_EN_ICR (1 << 29)
@@ -161,6 +163,8 @@
#define OMAP3430_EN_MAILBOXES_SHIFT 7
#define OMAP3430_EN_OMAPCTRL (1 << 6)
#define OMAP3430_EN_OMAPCTRL_SHIFT 6
+#define OMAP3430_EN_SAD2D (1 << 3)
+#define OMAP3430_EN_SAD2D_SHIFT 3
#define OMAP3430_EN_SDRC (1 << 1)
#define OMAP3430_EN_SDRC_SHIFT 1
@@ -176,6 +180,10 @@
#define OMAP3430_EN_DES1 (1 << 0)
#define OMAP3430_EN_DES1_SHIFT 0
+/* CM_ICLKEN3_CORE */
+#define OMAP3430_EN_MAD2D_SHIFT 3
+#define OMAP3430_EN_MAD2D (1 << 3)
+
/* CM_FCLKEN3_CORE specific bits */
#define OMAP3430ES2_EN_TS_SHIFT 1
#define OMAP3430ES2_EN_TS_MASK (1 << 1)
@@ -231,6 +239,8 @@
#define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0)
/* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_MODEM (1 << 31)
+#define OMAP3430_AUTO_MODEM_SHIFT 31
#define OMAP3430ES2_AUTO_MMC3 (1 << 30)
#define OMAP3430ES2_AUTO_MMC3_SHIFT 30
#define OMAP3430ES2_AUTO_ICR (1 << 29)
@@ -287,6 +297,8 @@
#define OMAP3430_AUTO_HSOTGUSB_SHIFT 4
#define OMAP3430ES1_AUTO_D2D (1 << 3)
#define OMAP3430ES1_AUTO_D2D_SHIFT 3
+#define OMAP3430_AUTO_SAD2D (1 << 3)
+#define OMAP3430_AUTO_SAD2D_SHIFT 3
#define OMAP3430_AUTO_SSI (1 << 0)
#define OMAP3430_AUTO_SSI_SHIFT 0
@@ -308,6 +320,8 @@
#define OMAP3430ES2_AUTO_USBTLL (1 << 2)
#define OMAP3430ES2_AUTO_USBTLL_SHIFT 2
#define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2)
+#define OMAP3430_AUTO_MAD2D_SHIFT 3
+#define OMAP3430_AUTO_MAD2D (1 << 3)
/* CM_CLKSEL_CORE */
#define OMAP3430_CLKSEL_SSI_SHIFT 8
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 65fdf78..1d3c93b 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -16,17 +16,12 @@
#include "prcm-common.h"
-#ifndef __ASSEMBLER__
-#define OMAP_CM_REGADDR(module, reg) \
- IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
-#else
#define OMAP2420_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-#endif
/*
* Architecture-specific global CM registers
@@ -38,6 +33,7 @@
#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010)
#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
new file mode 100644
index 0000000..2fd22f9
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -0,0 +1,330 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-onenand.c
+ *
+ * Copyright (C) 2006 - 2009 Nokia Corporation
+ * Contacts: Juha Yrjola
+ * Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <mach/onenand.h>
+#include <mach/board.h>
+#include <mach/gpmc.h>
+
+static struct omap_onenand_platform_data *gpmc_onenand_data;
+
+static struct platform_device gpmc_onenand_device = {
+ .name = "omap2-onenand",
+ .id = -1,
+};
+
+static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+{
+ struct gpmc_timings t;
+
+ const int t_cer = 15;
+ const int t_avdp = 12;
+ const int t_aavdh = 7;
+ const int t_ce = 76;
+ const int t_aa = 76;
+ const int t_oe = 20;
+ const int t_cez = 20; /* max of t_cez, t_oez */
+ const int t_ds = 30;
+ const int t_wpl = 40;
+ const int t_wph = 30;
+
+ memset(&t, 0, sizeof(t));
+ t.sync_clk = 0;
+ t.cs_on = 0;
+ t.adv_on = 0;
+
+ /* Read */
+ t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
+ t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
+ t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
+ t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
+ t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
+ t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+ t.cs_rd_off = t.oe_off;
+ t.rd_cycle = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
+
+ /* Write */
+ t.adv_wr_off = t.adv_rd_off;
+ t.we_on = t.oe_on;
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = t.we_on;
+ t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+ }
+ t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+ t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+ t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+
+ /* Configure GPMC for asynchronous read */
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_DEVICESIZE_16 |
+ GPMC_CONFIG1_MUXADDDATA);
+
+ return gpmc_cs_set_timings(cs, &t);
+}
+
+static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+ int sync_read, int sync_write, int hf)
+{
+ u32 reg;
+
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
+ reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
+ ONENAND_SYS_CFG1_BL_16;
+ if (sync_read)
+ reg |= ONENAND_SYS_CFG1_SYNC_READ;
+ else
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
+ if (sync_write)
+ reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
+ else
+ reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ if (hf)
+ reg |= ONENAND_SYS_CFG1_HF;
+ else
+ reg &= ~ONENAND_SYS_CFG1_HF;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+}
+
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+ void __iomem *onenand_base,
+ int freq)
+{
+ struct gpmc_timings t;
+ const int t_cer = 15;
+ const int t_avdp = 12;
+ const int t_cez = 20; /* max of t_cez, t_oez */
+ const int t_ds = 30;
+ const int t_wpl = 40;
+ const int t_wph = 30;
+ int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+ int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+ int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+ int err, ticks_cez;
+ int cs = cfg->cs;
+ u32 reg;
+
+ if (cfg->flags & ONENAND_SYNC_READ) {
+ sync_read = 1;
+ } else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+ sync_read = 1;
+ sync_write = 1;
+ }
+
+ if (!freq) {
+ /* Very first call freq is not known */
+ err = omap2_onenand_set_async_mode(cs, onenand_base);
+ if (err)
+ return err;
+ reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
+ switch ((reg >> 4) & 0xf) {
+ case 0:
+ freq = 40;
+ break;
+ case 1:
+ freq = 54;
+ break;
+ case 2:
+ freq = 66;
+ break;
+ case 3:
+ freq = 83;
+ break;
+ case 4:
+ freq = 104;
+ break;
+ default:
+ freq = 54;
+ break;
+ }
+ first_time = 1;
+ }
+
+ switch (freq) {
+ case 83:
+ min_gpmc_clk_period = 12; /* 83 MHz */
+ t_ces = 5;
+ t_avds = 4;
+ t_avdh = 2;
+ t_ach = 6;
+ t_aavdh = 6;
+ t_rdyo = 9;
+ break;
+ case 66:
+ min_gpmc_clk_period = 15; /* 66 MHz */
+ t_ces = 6;
+ t_avds = 5;
+ t_avdh = 2;
+ t_ach = 6;
+ t_aavdh = 6;
+ t_rdyo = 11;
+ break;
+ default:
+ min_gpmc_clk_period = 18; /* 54 MHz */
+ t_ces = 7;
+ t_avds = 7;
+ t_avdh = 7;
+ t_ach = 9;
+ t_aavdh = 7;
+ t_rdyo = 15;
+ sync_write = 0;
+ break;
+ }
+
+ tick_ns = gpmc_ticks_to_ns(1);
+ div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+ gpmc_clk_ns = gpmc_ticks_to_ns(div);
+ if (gpmc_clk_ns < 15) /* >66Mhz */
+ hf = 1;
+ if (hf)
+ latency = 6;
+ else if (gpmc_clk_ns >= 25) /* 40 MHz*/
+ latency = 3;
+ else
+ latency = 4;
+
+ if (first_time)
+ set_onenand_cfg(onenand_base, latency,
+ sync_read, sync_write, hf);
+
+ if (div == 1) {
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+ reg |= (1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+ reg |= (1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+ reg |= (1 << 7);
+ reg |= (1 << 23);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+ } else {
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+ reg &= ~(1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+ reg &= ~(1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+ reg &= ~(1 << 7);
+ reg &= ~(1 << 23);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+ }
+
+ /* Set synchronous read timings */
+ memset(&t, 0, sizeof(t));
+ t.sync_clk = min_gpmc_clk_period;
+ t.cs_on = 0;
+ t.adv_on = 0;
+ fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
+ fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
+ t.page_burst_access = gpmc_clk_ns;
+
+ /* Read */
+ t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
+ t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+ t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
+ t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+ t.cs_rd_off = t.oe_off;
+ ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
+ t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
+ ticks_cez);
+
+ /* Write */
+ if (sync_write) {
+ t.adv_wr_off = t.adv_rd_off;
+ t.we_on = 0;
+ t.we_off = t.cs_rd_off;
+ t.cs_wr_off = t.cs_rd_off;
+ t.wr_cycle = t.rd_cycle;
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
+ gpmc_ns_to_ticks(min_gpmc_clk_period +
+ t_rdyo));
+ t.wr_access = t.access;
+ }
+ } else {
+ t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
+ t_avdp, t_cer));
+ t.we_on = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
+ t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+ t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+ t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = t.we_on;
+ t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+ }
+ }
+
+ /* Configure GPMC for synchronous read */
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_WRAPBURST_SUPP |
+ GPMC_CONFIG1_READMULTIPLE_SUPP |
+ (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
+ (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
+ (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
+ GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
+ GPMC_CONFIG1_PAGE_LEN(2) |
+ (cpu_is_omap34xx() ? 0 :
+ (GPMC_CONFIG1_WAIT_READ_MON |
+ GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
+ GPMC_CONFIG1_DEVICESIZE_16 |
+ GPMC_CONFIG1_DEVICETYPE_NOR |
+ GPMC_CONFIG1_MUXADDDATA);
+
+ err = gpmc_cs_set_timings(cs, &t);
+ if (err)
+ return err;
+
+ set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+
+ return 0;
+}
+
+static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+{
+ struct device *dev = &gpmc_onenand_device.dev;
+
+ /* Set sync timings in GPMC */
+ if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+ freq) < 0) {
+ dev_err(dev, "Unable to set synchronous mode\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+{
+ gpmc_onenand_data = _onenand_data;
+ gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
+ gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
+
+ if (cpu_is_omap24xx() &&
+ (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+ printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+ gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+ gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+ }
+
+ if (platform_device_register(&gpmc_onenand_device) < 0) {
+ printk(KERN_ERR "Unable to register OneNAND device\n");
+ return;
+ }
+}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
new file mode 100644
index 0000000..df99d31
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Contact: Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/board.h>
+#include <mach/gpmc.h>
+#include <mach/gpmc-smc91x.h>
+
+static struct omap_smc91x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smc91x_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smc91x_platdata gpmc_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+};
+
+static struct platform_device gpmc_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(gpmc_smc91x_resources),
+ .resource = gpmc_smc91x_resources,
+ .dev = {
+ .platform_data = &gpmc_smc91x_info,
+ },
+};
+
+/*
+ * Set the gpmc timings for smc91c96. The timings are taken
+ * from the data sheet available at:
+ * http://www.smsc.com/main/catalog/lan91c96.html
+ * REVISIT: Level shifters can add at least to the access latency.
+ */
+static int smc91c96_gpmc_retime(void)
+{
+ struct gpmc_timings t;
+ const int t3 = 10; /* Figure 12.2 read and 12.4 write */
+ const int t4_r = 20; /* Figure 12.2 read */
+ const int t4_w = 5; /* Figure 12.4 write */
+ const int t5 = 25; /* Figure 12.2 read */
+ const int t6 = 15; /* Figure 12.2 read */
+ const int t7 = 5; /* Figure 12.4 write */
+ const int t8 = 5; /* Figure 12.4 write */
+ const int t20 = 185; /* Figure 12.2 read and 12.4 write */
+ u32 l;
+
+ memset(&t, 0, sizeof(t));
+
+ /* Read timings */
+ t.cs_on = 0;
+ t.adv_on = t.cs_on;
+ t.oe_on = t.adv_on + t3;
+ t.access = t.oe_on + t5;
+ t.oe_off = t.access;
+ t.adv_rd_off = t.oe_off + max(t4_r, t6);
+ t.cs_rd_off = t.oe_off;
+ t.rd_cycle = t20 - t.oe_on;
+
+ /* Write timings */
+ t.we_on = t.adv_on + t3;
+
+ if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
+ t.wr_data_mux_bus = t.we_on;
+ t.we_off = t.wr_data_mux_bus + t7;
+ } else
+ t.we_off = t.we_on + t7;
+ if (cpu_is_omap34xx())
+ t.wr_access = t.we_off;
+ t.adv_wr_off = t.we_off + max(t4_w, t8);
+ t.cs_wr_off = t.we_off + t4_w;
+ t.wr_cycle = t20 - t.we_on;
+
+ l = GPMC_CONFIG1_DEVICESIZE_16;
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ l |= GPMC_CONFIG1_MUXADDDATA;
+ if (gpmc_cfg->flags & GPMC_READ_MON)
+ l |= GPMC_CONFIG1_WAIT_READ_MON;
+ if (gpmc_cfg->flags & GPMC_WRITE_MON)
+ l |= GPMC_CONFIG1_WAIT_WRITE_MON;
+ if (gpmc_cfg->wait_pin)
+ l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
+ gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
+
+ /*
+ * FIXME: Calculate the address and data bus muxed timings.
+ * Note that at least adv_rd_off needs to be changed according
+ * to omap3430 TRM Figure 11-11. Are the sdp boards using the
+ * FPGA in between smc91x and omap as the timings are different
+ * from above?
+ */
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ return 0;
+
+ return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
+}
+
+/*
+ * Initialize smc91x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
+{
+ unsigned long cs_mem_base;
+ int ret;
+
+ gpmc_cfg = board_data;
+
+ if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
+ gpmc_cfg->retime = smc91c96_gpmc_retime;
+
+ if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+ return;
+ }
+
+ gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
+ gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
+ gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+ if (gpmc_cfg->retime) {
+ ret = gpmc_cfg->retime();
+ if (ret != 0)
+ goto free1;
+ }
+
+ if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+ goto free1;
+
+ gpio_direction_input(gpmc_cfg->gpio_irq);
+ gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+
+ if (gpmc_cfg->gpio_pwrdwn) {
+ ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+ if (ret)
+ goto free2;
+ gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
+ }
+
+ if (gpmc_cfg->gpio_reset) {
+ ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+ if (ret)
+ goto free3;
+
+ gpio_direction_output(gpmc_cfg->gpio_reset, 0);
+ gpio_set_value(gpmc_cfg->gpio_reset, 1);
+ msleep(100);
+ gpio_set_value(gpmc_cfg->gpio_reset, 0);
+ }
+
+ if (platform_device_register(&gpmc_smc91x_device) < 0) {
+ printk(KERN_ERR "Unable to register smc91x device\n");
+ gpio_free(gpmc_cfg->gpio_reset);
+ goto free3;
+ }
+
+ return;
+
+free3:
+ if (gpmc_cfg->gpio_pwrdwn)
+ gpio_free(gpmc_cfg->gpio_pwrdwn);
+free2:
+ gpio_free(gpmc_cfg->gpio_irq);
+free1:
+ gpmc_cs_free(gpmc_cfg->cs);
+
+ printk(KERN_ERR "Could not initialize smc91x\n");
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2249049..f91934b 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -5,6 +5,9 @@
*
* Author: Juha Yrjola
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -424,6 +427,9 @@
} else if (cpu_is_omap34xx()) {
ck = "gpmc_fck";
l = OMAP34XX_GPMC_BASE;
+ } else if (cpu_is_omap44xx()) {
+ ck = "gpmc_fck";
+ l = OMAP44XX_GPMC_BASE;
}
gpmc_l3_clk = clk_get(NULL, ck);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 34b5914..458990e 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -6,6 +6,9 @@
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -200,7 +203,10 @@
omap24xx_check_revision();
else if (cpu_is_omap34xx())
omap34xx_check_revision();
- else
+ else if (cpu_is_omap44xx()) {
+ printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+ return;
+ } else
pr_err("OMAP revision unknown, please fix!\n");
/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 916fcd3..32afd94 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,12 +4,14 @@
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
*
* Author:
* Juha Yrjola <juha.yrjola@nokia.com>
* Syed Khasim <x0khasim@ti.com>
*
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -30,6 +32,7 @@
#include <mach/sdrc.h>
#include <mach/gpmc.h>
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */
#include "clock.h"
#include <mach/powerdomain.h>
@@ -38,7 +41,7 @@
#include <mach/clockdomain.h>
#include "clockdomains.h"
-
+#endif
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
@@ -166,6 +169,46 @@
},
};
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+ {
+ .virtual = L3_44XX_VIRT,
+ .pfn = __phys_to_pfn(L3_44XX_PHYS),
+ .length = L3_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_44XX_PHYS),
+ .length = L4_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_WK_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_44XX_PHYS),
+ .length = L4_WK_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = OMAP44XX_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+ .length = OMAP44XX_GPMC_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_PER_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
+ .length = L4_PER_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_EMU_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_EMU_44XX_PHYS),
+ .length = L4_EMU_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+#endif
void __init omap2_map_common_io(void)
{
@@ -183,6 +226,9 @@
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
@@ -198,9 +244,11 @@
void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
{
omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
omap2_sdrc_init(sp);
+#endif
gpmc_init();
}
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
new file mode 100644
index 0000000..015f22a
--- /dev/null
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -0,0 +1,323 @@
+/*
+ * omap iommu: omap2/3 architecture specific functions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ * Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+
+#include <mach/iommu.h>
+
+/*
+ * omap2 architecture specific register bit definitions
+ */
+#define IOMMU_ARCH_VERSION 0x00000011
+
+/* SYSCONF */
+#define MMU_SYS_IDLE_SHIFT 3
+#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT)
+
+#define MMU_SYS_SOFTRESET (1 << 1)
+#define MMU_SYS_AUTOIDLE 1
+
+/* SYSSTATUS */
+#define MMU_SYS_RESETDONE 1
+
+/* IRQSTATUS & IRQENABLE */
+#define MMU_IRQ_MULTIHITFAULT (1 << 4)
+#define MMU_IRQ_TABLEWALKFAULT (1 << 3)
+#define MMU_IRQ_EMUMISS (1 << 2)
+#define MMU_IRQ_TRANSLATIONFAULT (1 << 1)
+#define MMU_IRQ_TLBMISS (1 << 0)
+#define MMU_IRQ_MASK \
+ (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
+ MMU_IRQ_TRANSLATIONFAULT)
+
+/* MMU_CNTL */
+#define MMU_CNTL_SHIFT 1
+#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT)
+#define MMU_CNTL_EML_TLB (1 << 3)
+#define MMU_CNTL_TWL_EN (1 << 2)
+#define MMU_CNTL_MMU_EN (1 << 1)
+
+#define get_cam_va_mask(pgsz) \
+ (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \
+ ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \
+ ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \
+ ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0)
+
+static int omap2_iommu_enable(struct iommu *obj)
+{
+ u32 l, pa;
+ unsigned long timeout;
+
+ if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K))
+ return -EINVAL;
+
+ pa = virt_to_phys(obj->iopgd);
+ if (!IS_ALIGNED(pa, SZ_16K))
+ return -EINVAL;
+
+ iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
+
+ timeout = jiffies + msecs_to_jiffies(20);
+ do {
+ l = iommu_read_reg(obj, MMU_SYSSTATUS);
+ if (l & MMU_SYS_RESETDONE)
+ break;
+ } while (time_after(jiffies, timeout));
+
+ if (!(l & MMU_SYS_RESETDONE)) {
+ dev_err(obj->dev, "can't take mmu out of reset\n");
+ return -ENODEV;
+ }
+
+ l = iommu_read_reg(obj, MMU_REVISION);
+ dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
+ (l >> 4) & 0xf, l & 0xf);
+
+ l = iommu_read_reg(obj, MMU_SYSCONFIG);
+ l &= ~MMU_SYS_IDLE_MASK;
+ l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
+ iommu_write_reg(obj, l, MMU_SYSCONFIG);
+
+ iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
+ iommu_write_reg(obj, pa, MMU_TTB);
+
+ l = iommu_read_reg(obj, MMU_CNTL);
+ l &= ~MMU_CNTL_MASK;
+ l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+ iommu_write_reg(obj, l, MMU_CNTL);
+
+ return 0;
+}
+
+static void omap2_iommu_disable(struct iommu *obj)
+{
+ u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+ l &= ~MMU_CNTL_MASK;
+ iommu_write_reg(obj, l, MMU_CNTL);
+ iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
+
+ dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
+}
+
+static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
+{
+ int i;
+ u32 stat, da;
+ const char *err_msg[] = {
+ "tlb miss",
+ "translation fault",
+ "emulation miss",
+ "table walk fault",
+ "multi hit fault",
+ };
+
+ stat = iommu_read_reg(obj, MMU_IRQSTATUS);
+ stat &= MMU_IRQ_MASK;
+ if (!stat)
+ return 0;
+
+ da = iommu_read_reg(obj, MMU_FAULT_AD);
+ *ra = da;
+
+ dev_err(obj->dev, "%s:\tda:%08x ", __func__, da);
+
+ for (i = 0; i < ARRAY_SIZE(err_msg); i++) {
+ if (stat & (1 << i))
+ printk("%s ", err_msg[i]);
+ }
+ printk("\n");
+
+ iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+ return stat;
+}
+
+static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
+ cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
+}
+
+static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
+ iommu_write_reg(obj, cr->ram, MMU_RAM);
+}
+
+static u32 omap2_cr_to_virt(struct cr_regs *cr)
+{
+ u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
+ u32 mask = get_cam_va_mask(cr->cam & page_size);
+
+ return cr->cam & mask;
+}
+
+static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
+{
+ struct cr_regs *cr;
+
+ if (e->da & ~(get_cam_va_mask(e->pgsz))) {
+ dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
+ e->da);
+ return ERR_PTR(-EINVAL);
+ }
+
+ cr = kmalloc(sizeof(*cr), GFP_KERNEL);
+ if (!cr)
+ return ERR_PTR(-ENOMEM);
+
+ cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+ cr->ram = e->pa | e->endian | e->elsz | e->mixed;
+
+ return cr;
+}
+
+static inline int omap2_cr_valid(struct cr_regs *cr)
+{
+ return cr->cam & MMU_CAM_V;
+}
+
+static u32 omap2_get_pte_attr(struct iotlb_entry *e)
+{
+ u32 attr;
+
+ attr = e->mixed << 5;
+ attr |= e->endian;
+ attr |= e->elsz >> 3;
+ attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
+
+ return attr;
+}
+
+static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
+{
+ char *p = buf;
+
+ /* FIXME: Need more detail analysis of cam/ram */
+ p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+
+ return p - buf;
+}
+
+#define pr_reg(name) \
+ p += sprintf(p, "%20s: %08x\n", \
+ __stringify(name), iommu_read_reg(obj, MMU_##name));
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+ char *p = buf;
+
+ pr_reg(REVISION);
+ pr_reg(SYSCONFIG);
+ pr_reg(SYSSTATUS);
+ pr_reg(IRQSTATUS);
+ pr_reg(IRQENABLE);
+ pr_reg(WALKING_ST);
+ pr_reg(CNTL);
+ pr_reg(FAULT_AD);
+ pr_reg(TTB);
+ pr_reg(LOCK);
+ pr_reg(LD_TLB);
+ pr_reg(CAM);
+ pr_reg(RAM);
+ pr_reg(GFLUSH);
+ pr_reg(FLUSH_ENTRY);
+ pr_reg(READ_CAM);
+ pr_reg(READ_RAM);
+ pr_reg(EMU_FAULT_AD);
+
+ return p - buf;
+}
+
+static void omap2_iommu_save_ctx(struct iommu *obj)
+{
+ int i;
+ u32 *p = obj->ctx;
+
+ for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+ p[i] = iommu_read_reg(obj, i * sizeof(u32));
+ dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+ }
+
+ BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_iommu_restore_ctx(struct iommu *obj)
+{
+ int i;
+ u32 *p = obj->ctx;
+
+ for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+ iommu_write_reg(obj, p[i], i * sizeof(u32));
+ dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+ }
+
+ BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+ e->da = cr->cam & MMU_CAM_VATAG_MASK;
+ e->pa = cr->ram & MMU_RAM_PADDR_MASK;
+ e->valid = cr->cam & MMU_CAM_V;
+ e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK;
+ e->endian = cr->ram & MMU_RAM_ENDIAN_MASK;
+ e->elsz = cr->ram & MMU_RAM_ELSZ_MASK;
+ e->mixed = cr->ram & MMU_RAM_MIXED;
+}
+
+static const struct iommu_functions omap2_iommu_ops = {
+ .version = IOMMU_ARCH_VERSION,
+
+ .enable = omap2_iommu_enable,
+ .disable = omap2_iommu_disable,
+ .fault_isr = omap2_iommu_fault_isr,
+
+ .tlb_read_cr = omap2_tlb_read_cr,
+ .tlb_load_cr = omap2_tlb_load_cr,
+
+ .cr_to_e = omap2_cr_to_e,
+ .cr_to_virt = omap2_cr_to_virt,
+ .alloc_cr = omap2_alloc_cr,
+ .cr_valid = omap2_cr_valid,
+ .dump_cr = omap2_dump_cr,
+
+ .get_pte_attr = omap2_get_pte_attr,
+
+ .save_ctx = omap2_iommu_save_ctx,
+ .restore_ctx = omap2_iommu_restore_ctx,
+ .dump_ctx = omap2_iommu_dump_ctx,
+};
+
+static int __init omap2_iommu_init(void)
+{
+ return install_iommu_arch(&omap2_iommu_ops);
+}
+module_init(omap2_iommu_init);
+
+static void __exit omap2_iommu_exit(void)
+{
+ uninstall_iommu_arch(&omap2_iommu_ops);
+}
+module_exit(omap2_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 998c5c4..b828638 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -28,7 +28,6 @@
#define INTC_MIR_CLEAR0 0x0088
#define INTC_MIR_SET0 0x008c
#define INTC_PENDING_IRQ0 0x0098
-
/* Number of IRQ state bits in each MIR register */
#define IRQ_BITS_PER_REG 32
@@ -134,7 +133,6 @@
.ack = omap_mask_ack_irq,
.mask = omap_mask_irq,
.unmask = omap_unmask_irq,
- .disable = omap_mask_irq,
};
static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
@@ -157,6 +155,22 @@
intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
}
+int omap_irq_pending(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+ struct omap_irq_bank *bank = irq_banks + i;
+ int irq;
+
+ for (irq = 0; irq < bank->nr_irqs; irq += 32)
+ if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
+ ((irq >> 5) << 5)))
+ return 1;
+ }
+ return 0;
+}
+
void __init omap_init_irq(void)
{
unsigned long nr_of_irqs = 0;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index dc40b3e..9756a87 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -16,8 +16,8 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <mach/control.h>
@@ -26,32 +26,10 @@
#include "mmc-twl4030.h"
-#if defined(CONFIG_TWL4030_CORE) && \
+
+#if defined(CONFIG_REGULATOR) && \
(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
-#define LDO_CLR 0x00
-#define VSEL_S2_CLR 0x40
-
-#define VMMC1_DEV_GRP 0x27
-#define VMMC1_CLR 0x00
-#define VMMC1_315V 0x03
-#define VMMC1_300V 0x02
-#define VMMC1_285V 0x01
-#define VMMC1_185V 0x00
-#define VMMC1_DEDICATED 0x2A
-
-#define VMMC2_DEV_GRP 0x2B
-#define VMMC2_CLR 0x40
-#define VMMC2_315V 0x0c
-#define VMMC2_300V 0x0b
-#define VMMC2_285V 0x0a
-#define VMMC2_280V 0x09
-#define VMMC2_260V 0x08
-#define VMMC2_185V 0x06
-#define VMMC2_DEDICATED 0x2E
-
-#define VMMC_DEV_GRP_P1 0x20
-
static u16 control_pbias_offset;
static u16 control_devconf1_offset;
@@ -59,19 +37,16 @@
static struct twl_mmc_controller {
struct omap_mmc_platform_data *mmc;
- u8 twl_vmmc_dev_grp;
- u8 twl_mmc_dedicated;
- char name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC] = {
- {
- .twl_vmmc_dev_grp = VMMC1_DEV_GRP,
- .twl_mmc_dedicated = VMMC1_DEDICATED,
- },
- {
- .twl_vmmc_dev_grp = VMMC2_DEV_GRP,
- .twl_mmc_dedicated = VMMC2_DEDICATED,
- },
-};
+ /* Vcc == configured supply
+ * Vcc_alt == optional
+ * - MMC1, supply for DAT4..DAT7
+ * - MMC2/MMC2, external level shifter voltage supply, for
+ * chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+ */
+ struct regulator *vcc;
+ struct regulator *vcc_aux;
+ char name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
static int twl_mmc_card_detect(int irq)
{
@@ -117,16 +92,60 @@
int ret = 0;
int i;
- ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
- if (ret)
- goto done;
- ret = gpio_direction_input(mmc->slots[0].switch_pin);
- if (ret)
- goto err;
+ /* MMC/SD/SDIO doesn't require a card detect switch */
+ if (gpio_is_valid(mmc->slots[0].switch_pin)) {
+ ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+ if (ret)
+ goto done;
+ ret = gpio_direction_input(mmc->slots[0].switch_pin);
+ if (ret)
+ goto err;
+ }
+ /* require at least main regulator */
for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
if (hsmmc[i].name == mmc->slots[0].name) {
+ struct regulator *reg;
+
hsmmc[i].mmc = mmc;
+
+ reg = regulator_get(dev, "vmmc");
+ if (IS_ERR(reg)) {
+ dev_dbg(dev, "vmmc regulator missing\n");
+ /* HACK: until fixed.c regulator is usable,
+ * we don't require a main regulator
+ * for MMC2 or MMC3
+ */
+ if (i != 0)
+ break;
+ ret = PTR_ERR(reg);
+ goto err;
+ }
+ hsmmc[i].vcc = reg;
+ mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+ /* allow an aux regulator */
+ reg = regulator_get(dev, "vmmc_aux");
+ hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+ /* UGLY HACK: workaround regulator framework bugs.
+ * When the bootloader leaves a supply active, it's
+ * initialized with zero usecount ... and we can't
+ * disable it without first enabling it. Until the
+ * framework is fixed, we need a workaround like this
+ * (which is safe for MMC, but not in general).
+ */
+ if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
+ regulator_enable(hsmmc[i].vcc);
+ regulator_disable(hsmmc[i].vcc);
+ }
+ if (hsmmc[i].vcc_aux) {
+ if (regulator_is_enabled(reg) > 0) {
+ regulator_enable(reg);
+ regulator_disable(reg);
+ }
+ }
+
break;
}
}
@@ -173,96 +192,6 @@
#define twl_mmc_resume NULL
#endif
-/*
- * Sets the MMC voltage in twl4030
- */
-
-#define MMC1_OCR (MMC_VDD_165_195 \
- |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-#define MMC2_OCR (MMC_VDD_165_195 \
- |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
- |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-
-static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
-{
- int ret;
- u8 vmmc = 0, dev_grp_val;
-
- if (!vdd)
- goto doit;
-
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
- /* VMMC1: max 220 mA. And for 8-bit mode,
- * VSIM: max 50 mA
- */
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- vmmc = VMMC1_185V;
- /* and VSIM_180V */
- break;
- case MMC_VDD_28_29:
- vmmc = VMMC1_285V;
- /* and VSIM_280V */
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- vmmc = VMMC1_300V;
- /* and VSIM_300V */
- break;
- case MMC_VDD_31_32:
- vmmc = VMMC1_315V;
- /* error if VSIM needed */
- break;
- default:
- return -EINVAL;
- }
- } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
- /* VMMC2: max 100 mA */
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- vmmc = VMMC2_185V;
- break;
- case MMC_VDD_25_26:
- case MMC_VDD_26_27:
- vmmc = VMMC2_260V;
- break;
- case MMC_VDD_27_28:
- vmmc = VMMC2_280V;
- break;
- case MMC_VDD_28_29:
- vmmc = VMMC2_285V;
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- vmmc = VMMC2_300V;
- break;
- case MMC_VDD_31_32:
- vmmc = VMMC2_315V;
- break;
- default:
- return -EINVAL;
- }
- } else {
- return -EINVAL;
- }
-
-doit:
- if (vdd)
- dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */
- else
- dev_grp_val = LDO_CLR; /* Power down */
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- dev_grp_val, c->twl_vmmc_dev_grp);
- if (ret || !vdd)
- return ret;
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- vmmc, c->twl_mmc_dedicated);
-
- return ret;
-}
-
static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
@@ -273,11 +202,13 @@
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
- * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+ * card with Vcc regulator (from twl4030 or whatever). OMAP has both
* 1.8V and 3.0V modes, controlled by the PBIAS register.
*
* In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
* is most naturally TWL VSIM; those pins also use PBIAS.
+ *
+ * FIXME handle VMMC1A as needed ...
*/
if (power_on) {
if (cpu_is_omap2430()) {
@@ -300,7 +231,7 @@
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
- ret = twl_mmc_set_voltage(c, vdd);
+ ret = mmc_regulator_set_ocr(c->vcc, vdd);
/* 100ms delay required for PBIAS configuration */
msleep(100);
@@ -316,7 +247,7 @@
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
- ret = twl_mmc_set_voltage(c, 0);
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
/* 100ms delay required for PBIAS configuration */
msleep(100);
@@ -329,19 +260,33 @@
return ret;
}
-static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
- int ret;
+ int ret = 0;
struct twl_mmc_controller *c = &hsmmc[1];
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ /* If we don't see a Vcc regulator, assume it's a fixed
+ * voltage always-on regulator.
+ */
+ if (!c->vcc)
+ return 0;
+
/*
- * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+ * Assume Vcc regulator is used only to power the card ... OMAP
* VDDS is used to power the pins, optionally with a transceiver to
* support cards using voltages other than VDDS (1.8V nominal). When a
* transceiver is used, DAT3..7 are muxed as transceiver control pins.
+ *
+ * In some cases this regulator won't support enable/disable;
+ * e.g. it's a fixed rail for a WLAN chip.
+ *
+ * In other cases vcc_aux switches interface power. Example, for
+ * eMMC cards it represents VccQ. Sometimes transceivers or SDIO
+ * chips/cards need an interface voltage rail too.
*/
if (power_on) {
+ /* only MMC2 supports a CLKIN */
if (mmc->slots[0].internal_clock) {
u32 reg;
@@ -349,24 +294,23 @@
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
- ret = twl_mmc_set_voltage(c, vdd);
+ ret = mmc_regulator_set_ocr(c->vcc, vdd);
+ /* enable interface voltage rail, if needed */
+ if (ret == 0 && c->vcc_aux) {
+ ret = regulator_enable(c->vcc_aux);
+ if (ret < 0)
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
+ }
} else {
- ret = twl_mmc_set_voltage(c, 0);
+ if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
+ ret = regulator_disable(c->vcc_aux);
+ if (ret == 0)
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
}
return ret;
}
-static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
- int vdd)
-{
- /*
- * Assume MMC3 has self-powered device connected, for example on-board
- * chip with external power source.
- */
- return 0;
-}
-
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -412,10 +356,10 @@
mmc->slots[0].wires = c->wires;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
+ mmc->init = twl_mmc_late_init;
- /* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+ /* note: twl4030 card detect GPIOs can disable VMMCx ... */
if (gpio_is_valid(c->gpio_cd)) {
- mmc->init = twl_mmc_late_init;
mmc->cleanup = twl_mmc_cleanup;
mmc->suspend = twl_mmc_suspend;
mmc->resume = twl_mmc_resume;
@@ -439,26 +383,28 @@
} else
mmc->slots[0].gpio_wp = -EINVAL;
- /* NOTE: we assume OMAP's MMC1 and MMC2 use
- * the TWL4030's VMMC1 and VMMC2, respectively;
- * and that MMC3 device has it's own power source.
+ /* NOTE: MMC slots should have a Vcc regulator set up.
+ * This may be from a TWL4030-family chip, another
+ * controllable regulator, or a fixed supply.
+ *
+ * temporary HACK: ocr_mask instead of fixed supply
*/
+ mmc->slots[0].ocr_mask = c->ocr_mask;
switch (c->mmc) {
case 1:
+ /* on-chip level shifting via PBIAS0/PBIAS1 */
mmc->slots[0].set_power = twl_mmc1_set_power;
- mmc->slots[0].ocr_mask = MMC1_OCR;
break;
case 2:
- mmc->slots[0].set_power = twl_mmc2_set_power;
- if (c->transceiver)
- mmc->slots[0].ocr_mask = MMC2_OCR;
- else
- mmc->slots[0].ocr_mask = MMC_VDD_165_195;
- break;
+ if (c->ext_clock)
+ c->transceiver = 1;
+ if (c->transceiver && c->wires > 4)
+ c->wires = 4;
+ /* FALLTHROUGH */
case 3:
- mmc->slots[0].set_power = twl_mmc3_set_power;
- mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+ /* off-chip level shifting, or none */
+ mmc->slots[0].set_power = twl_mmc23_set_power;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index ea59e86..3807c45 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -16,9 +16,10 @@
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct device *dev; /* returned: pointer to mmc adapter */
+ int ocr_mask; /* temporary HACK */
};
-#if defined(CONFIG_TWL4030_CORE) && \
+#if defined(CONFIG_REGULATOR) && \
(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
new file mode 100644
index 0000000..194189c
--- /dev/null
+++ b/arch/arm/mach-omap2/omap3-iommu.c
@@ -0,0 +1,105 @@
+/*
+ * omap iommu: omap3 device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/iommu.h>
+
+#define OMAP3_MMU1_BASE 0x480bd400
+#define OMAP3_MMU2_BASE 0x5d000000
+#define OMAP3_MMU1_IRQ 24
+#define OMAP3_MMU2_IRQ 28
+
+
+static unsigned long iommu_base[] __initdata = {
+ OMAP3_MMU1_BASE,
+ OMAP3_MMU2_BASE,
+};
+
+static int iommu_irq[] __initdata = {
+ OMAP3_MMU1_IRQ,
+ OMAP3_MMU2_IRQ,
+};
+
+static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+ {
+ .name = "isp",
+ .nr_tlb_entries = 8,
+ .clk_name = "cam_ick",
+ },
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+ {
+ .name = "iva2",
+ .nr_tlb_entries = 32,
+ .clk_name = "iva2_ck",
+ },
+#endif
+};
+#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+
+static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
+
+static int __init omap3_iommu_init(void)
+{
+ int i, err;
+
+ for (i = 0; i < NR_IOMMU_DEVICES; i++) {
+ struct platform_device *pdev;
+ struct resource res[2];
+
+ pdev = platform_device_alloc("omap-iommu", i);
+ if (!pdev) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ memset(res, 0, sizeof(res));
+ res[0].start = iommu_base[i];
+ res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = res[1].end = iommu_irq[i];
+ res[1].flags = IORESOURCE_IRQ;
+
+ err = platform_device_add_resources(pdev, res,
+ ARRAY_SIZE(res));
+ if (err)
+ goto err_out;
+ err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
+ sizeof(omap3_iommu_pdata[0]));
+ if (err)
+ goto err_out;
+ err = platform_device_add(pdev);
+ if (err)
+ goto err_out;
+ omap3_iommu_pdev[i] = pdev;
+ }
+ return 0;
+
+err_out:
+ while (i--)
+ platform_device_put(omap3_iommu_pdev[i]);
+ return err;
+}
+module_init(omap3_iommu_init);
+
+static void __exit omap3_iommu_exit(void)
+{
+ int i;
+
+ for (i = 0; i < NR_IOMMU_DEVICES; i++)
+ platform_device_unregister(omap3_iommu_pdev[i]);
+}
+module_exit(omap3_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap3 device registration");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
new file mode 100644
index 0000000..6cc375a
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -0,0 +1,152 @@
+/*
+ * OMAP Power Management debug routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ * Jouni Hogander
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "pm.h"
+
+int omap2_pm_debug;
+
+#define DUMP_PRM_MOD_REG(mod, reg) \
+ regs[reg_count].name = #mod "." #reg; \
+ regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+#define DUMP_CM_MOD_REG(mod, reg) \
+ regs[reg_count].name = #mod "." #reg; \
+ regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+#define DUMP_PRM_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_CM_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_INTC_REG(reg, off) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+ struct reg {
+ const char *name;
+ u32 val;
+ } regs[32];
+ int reg_count = 0, i;
+ const char *s1 = NULL, *s2 = NULL;
+
+ if (!resume) {
+#if 0
+ /* MPU */
+ DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
+ DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
+#endif
+#if 0
+ /* INTC */
+ DUMP_INTC_REG(INTC_MIR0, 0x0084);
+ DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+ DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+ DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
+ if (cpu_is_omap24xx()) {
+ DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
+ DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+ }
+ DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
+ DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
+ DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
+ DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
+ DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
+ DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
+ DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+#endif
+#if 0
+ /* DSP */
+ if (cpu_is_omap24xx()) {
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+ }
+#endif
+ } else {
+ DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
+ if (cpu_is_omap24xx())
+ DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
+ DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
+ DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+#if 1
+ DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+ DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+ DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+ }
+
+ switch (mode) {
+ case 0:
+ s1 = "full";
+ s2 = "retention";
+ break;
+ case 1:
+ s1 = "MPU";
+ s2 = "retention";
+ break;
+ case 2:
+ s1 = "MPU";
+ s2 = "idle";
+ break;
+ }
+
+ if (!resume)
+#ifdef CONFIG_NO_HZ
+ printk(KERN_INFO
+ "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+ jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
+ jiffies));
+#else
+ printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
+#endif
+ else
+ printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
+ us / 1000, us % 1000);
+
+ for (i = 0; i < reg_count; i++)
+ printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
deleted file mode 100644
index ea8ceae..0000000
--- a/arch/arm/mach-omap2/pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm.c
- *
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-static struct clk *vclk;
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
-static void (*saved_idle)(void);
-
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
-
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
-
-void omap2_pm_idle(void)
-{
- local_irq_disable();
- local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
-
- omap2_sram_idle();
- local_fiq_enable();
- local_irq_enable();
-}
-
-static int omap2_pm_prepare(void)
-{
- /* We cannot sleep in idle until we have resumed */
- saved_idle = pm_idle;
- pm_idle = NULL;
- return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
- return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
- int ret = 0;
-
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- ret = omap2_pm_suspend();
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static void omap2_pm_finish(void)
-{
- pm_idle = saved_idle;
-}
-
-static struct platform_suspend_ops omap_pm_ops = {
- .prepare = omap2_pm_prepare,
- .enter = omap2_pm_enter,
- .finish = omap2_pm_finish,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init omap2_pm_init(void)
-{
- return 0;
-}
-
-__initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
new file mode 100644
index 0000000..f7b3baf
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.h
@@ -0,0 +1,38 @@
+/*
+ * OMAP2/3 Power Management Routines
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Jouni Hogander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
+#define __ARCH_ARM_MACH_OMAP2_PM_H
+
+extern int omap2_pm_init(void);
+extern int omap3_pm_init(void);
+
+#ifdef CONFIG_PM_DEBUG
+extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us) do {} while (0);
+#define omap2_pm_debug 0
+#endif /* CONFIG_PM_DEBUG */
+
+extern void omap24xx_idle_loop_suspend(void);
+
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
+extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+extern void save_secure_ram_context(u32 *addr);
+
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+extern unsigned int omap34xx_suspend_sz;
+extern unsigned int save_secure_ram_context_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap34xx_cpu_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
new file mode 100644
index 0000000..db10255
--- /dev/null
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -0,0 +1,549 @@
+/*
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "pm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
+
+static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *core_pwrdm;
+
+static struct clockdomain *dsp_clkdm;
+static struct clockdomain *gfx_clkdm;
+
+static struct clk *osc_ck, *emul_ck;
+
+static int omap2_fclks_active(void)
+{
+ u32 f1, f2;
+
+ f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+ /* Ignore UART clocks. These are handled by UART core (serial.c) */
+ f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
+ f2 &= ~OMAP24XX_EN_UART3;
+
+ if (f1 | f2)
+ return 1;
+ return 0;
+}
+
+static void omap2_enter_full_retention(void)
+{
+ u32 l;
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+
+ /* There is 1 reference hold for all children of the oscillator
+ * clock, the following will remove it. If no one else uses the
+ * oscillator itself it will be disabled if/when we enter retention
+ * mode.
+ */
+ clk_disable(osc_ck);
+
+ /* Clear old wake-up events */
+ /* REVISIT: These write to reserved bits? */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+ /*
+ * Set MPU powerdomain's next power state to RETENTION;
+ * preserve logic state during retention
+ */
+ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+ /* Workaround to kill USB */
+ l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
+ omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
+
+ omap2_gpio_prepare_for_retention();
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(0, 0, 0);
+ getnstimeofday(&ts_preidle);
+ }
+
+ /* One last check for pending IRQs to avoid extra latency due
+ * to sleeping unnecessarily. */
+ if (omap_irq_pending())
+ goto no_sleep;
+
+ omap_uart_prepare_idle(0);
+ omap_uart_prepare_idle(1);
+ omap_uart_prepare_idle(2);
+
+ /* Jump to SRAM suspend code */
+ omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
+ OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
+ OMAP_SDRC_REGADDR(SDRC_POWER));
+
+ omap_uart_resume_idle(2);
+ omap_uart_resume_idle(1);
+ omap_uart_resume_idle(0);
+
+no_sleep:
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+ tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+ omap2_pm_dump(0, 1, tmp);
+ }
+ omap2_gpio_resume_after_retention();
+
+ clk_enable(osc_ck);
+
+ /* clear CORE wake-up events */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+
+ /* wakeup domain events - bit 1: GPT1, bit5 GPIO */
+ prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+
+ /* MPU domain wake events */
+ l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ if (l & 0x01)
+ prm_write_mod_reg(0x01, OCP_MOD,
+ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ if (l & 0x20)
+ prm_write_mod_reg(0x20, OCP_MOD,
+ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+ /* Mask future PRCM-to-MPU interrupts */
+ prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+}
+
+static int omap2_i2c_active(void)
+{
+ u32 l;
+
+ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+ u32 l;
+
+ /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
+ OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
+ OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+ return 0;
+ /* Check for UART3. */
+ l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ if (l & OMAP24XX_EN_UART3)
+ return 0;
+ if (sti_console_enabled)
+ return 0;
+
+ return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+ int only_idle = 0;
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+
+ /* Putting MPU into the WFI state while a transfer is active
+ * seems to cause the I2C block to timeout. Why? Good question. */
+ if (omap2_i2c_active())
+ return;
+
+ /* The peripherals seem not to be able to wake up the MPU when
+ * it is in retention mode. */
+ if (omap2_allow_mpu_retention()) {
+ /* REVISIT: These write to reserved bits? */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+ /* Try to enter MPU retention */
+ prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+ OMAP_LOGICRETSTATE,
+ MPU_MOD, PM_PWSTCTRL);
+ } else {
+ /* Block MPU retention */
+
+ prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+ only_idle = 1;
+ }
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+ getnstimeofday(&ts_preidle);
+ }
+
+ omap2_sram_idle();
+
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+ tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+ omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
+ }
+}
+
+static int omap2_can_sleep(void)
+{
+ if (omap2_fclks_active())
+ return 0;
+ if (osc_ck->usecount > 1)
+ return 0;
+ if (omap_dma_running())
+ return 0;
+
+ return 1;
+}
+
+static void omap2_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ if (!omap2_can_sleep()) {
+ if (omap_irq_pending())
+ goto out;
+ omap2_enter_mpu_retention();
+ goto out;
+ }
+
+ if (omap_irq_pending())
+ goto out;
+
+ omap2_enter_full_retention();
+
+out:
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap2_pm_prepare(void)
+{
+ /* We cannot sleep in idle until we have resumed */
+ disable_hlt();
+ return 0;
+}
+
+static int omap2_pm_suspend(void)
+{
+ u32 wken_wkup, mir1;
+
+ wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+ prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+
+ /* Mask GPT1 */
+ mir1 = omap_readl(0x480fe0a4);
+ omap_writel(1 << 5, 0x480fe0ac);
+
+ omap_uart_prepare_suspend();
+ omap2_enter_full_retention();
+
+ omap_writel(mir1, 0x480fe0a4);
+ prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+
+ return 0;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap2_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void omap2_pm_finish(void)
+{
+ enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+ .prepare = omap2_pm_prepare,
+ .enter = omap2_pm_enter,
+ .finish = omap2_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+{
+ omap2_clkdm_allow_idle(clkdm);
+ return 0;
+}
+
+static void __init prcm_setup_regs(void)
+{
+ int i, num_mem_banks;
+ struct powerdomain *pwrdm;
+
+ /* Enable autoidle */
+ prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+ OMAP2_PRCM_SYSCONFIG_OFFSET);
+
+ /* Set all domain wakeup dependencies */
+ prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
+ if (cpu_is_omap2430())
+ prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
+
+ /*
+ * Set CORE powerdomain memory banks to retain their contents
+ * during RETENTION
+ */
+ num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
+ for (i = 0; i < num_mem_banks; i++)
+ pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
+
+ /* Set CORE powerdomain's next power state to RETENTION */
+ pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+
+ /*
+ * Set MPU powerdomain's next power state to RETENTION;
+ * preserve logic state during retention
+ */
+ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+ /* Force-power down DSP, GFX powerdomains */
+
+ pwrdm = clkdm_get_pwrdm(dsp_clkdm);
+ pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ omap2_clkdm_sleep(dsp_clkdm);
+
+ pwrdm = clkdm_get_pwrdm(gfx_clkdm);
+ pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ omap2_clkdm_sleep(gfx_clkdm);
+
+ /* Enable clockdomain hardware-supervised control for all clkdms */
+ clkdm_for_each(_pm_clkdm_enable_hwsup);
+
+ /* Enable clock autoidle for all domains */
+ cm_write_mod_reg(OMAP24XX_AUTO_CAM |
+ OMAP24XX_AUTO_MAILBOXES |
+ OMAP24XX_AUTO_WDT4 |
+ OMAP2420_AUTO_WDT3 |
+ OMAP24XX_AUTO_MSPRO |
+ OMAP2420_AUTO_MMC |
+ OMAP24XX_AUTO_FAC |
+ OMAP2420_AUTO_EAC |
+ OMAP24XX_AUTO_HDQ |
+ OMAP24XX_AUTO_UART2 |
+ OMAP24XX_AUTO_UART1 |
+ OMAP24XX_AUTO_I2C2 |
+ OMAP24XX_AUTO_I2C1 |
+ OMAP24XX_AUTO_MCSPI2 |
+ OMAP24XX_AUTO_MCSPI1 |
+ OMAP24XX_AUTO_MCBSP2 |
+ OMAP24XX_AUTO_MCBSP1 |
+ OMAP24XX_AUTO_GPT12 |
+ OMAP24XX_AUTO_GPT11 |
+ OMAP24XX_AUTO_GPT10 |
+ OMAP24XX_AUTO_GPT9 |
+ OMAP24XX_AUTO_GPT8 |
+ OMAP24XX_AUTO_GPT7 |
+ OMAP24XX_AUTO_GPT6 |
+ OMAP24XX_AUTO_GPT5 |
+ OMAP24XX_AUTO_GPT4 |
+ OMAP24XX_AUTO_GPT3 |
+ OMAP24XX_AUTO_GPT2 |
+ OMAP2420_AUTO_VLYNQ |
+ OMAP24XX_AUTO_DSS,
+ CORE_MOD, CM_AUTOIDLE1);
+ cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
+ OMAP24XX_AUTO_SSI |
+ OMAP24XX_AUTO_USB,
+ CORE_MOD, CM_AUTOIDLE2);
+ cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
+ OMAP24XX_AUTO_GPMC |
+ OMAP24XX_AUTO_SDMA,
+ CORE_MOD, CM_AUTOIDLE3);
+ cm_write_mod_reg(OMAP24XX_AUTO_PKA |
+ OMAP24XX_AUTO_AES |
+ OMAP24XX_AUTO_RNG |
+ OMAP24XX_AUTO_SHA |
+ OMAP24XX_AUTO_DES,
+ CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+ cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+
+ /* Put DPLL and both APLLs into autoidle mode */
+ cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+ (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+ (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+ PLL_MOD, CM_AUTOIDLE);
+
+ cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
+ OMAP24XX_AUTO_WDT1 |
+ OMAP24XX_AUTO_MPU_WDT |
+ OMAP24XX_AUTO_GPIOS |
+ OMAP24XX_AUTO_32KSYNC |
+ OMAP24XX_AUTO_GPT1,
+ WKUP_MOD, CM_AUTOIDLE);
+
+ /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+ * stabilisation */
+ prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSSETUP_OFFSET);
+
+ /* Configure automatic voltage transition */
+ prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_VOLTSETUP_OFFSET);
+ prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+ (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+ OMAP24XX_MEMRETCTRL |
+ (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+ (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+ OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+
+ /* Enable wake-up events */
+ prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+ WKUP_MOD, PM_WKEN);
+}
+
+int __init omap2_pm_init(void)
+{
+ u32 l;
+
+ if (!cpu_is_omap24xx())
+ return -ENODEV;
+
+ printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+ l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+ printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+ /* Look up important powerdomains, clockdomains */
+
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+ if (!mpu_pwrdm)
+ pr_err("PM: mpu_pwrdm not found\n");
+
+ core_pwrdm = pwrdm_lookup("core_pwrdm");
+ if (!core_pwrdm)
+ pr_err("PM: core_pwrdm not found\n");
+
+ dsp_clkdm = clkdm_lookup("dsp_clkdm");
+ if (!dsp_clkdm)
+ pr_err("PM: mpu_clkdm not found\n");
+
+ gfx_clkdm = clkdm_lookup("gfx_clkdm");
+ if (!gfx_clkdm)
+ pr_err("PM: gfx_clkdm not found\n");
+
+
+ osc_ck = clk_get(NULL, "osc_ck");
+ if (IS_ERR(osc_ck)) {
+ printk(KERN_ERR "could not get osc_ck\n");
+ return -ENODEV;
+ }
+
+ if (cpu_is_omap242x()) {
+ emul_ck = clk_get(NULL, "emul_ck");
+ if (IS_ERR(emul_ck)) {
+ printk(KERN_ERR "could not get emul_ck\n");
+ clk_put(osc_ck);
+ return -ENODEV;
+ }
+ }
+
+ prcm_setup_regs();
+
+ /* Hack to prevent MPU retention when STI console is enabled. */
+ {
+ const struct omap_sti_console_config *sti;
+
+ sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+ struct omap_sti_console_config);
+ if (sti != NULL && sti->enable)
+ sti_console_enabled = 1;
+ }
+
+ /*
+ * We copy the assembler sleep/wakeup routines to SRAM.
+ * These routines need to be in SRAM as that's the only
+ * memory the MPU can see when it wakes up.
+ */
+ if (cpu_is_omap24xx()) {
+ omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+ omap24xx_idle_loop_suspend_sz);
+
+ omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+ omap24xx_cpu_suspend_sz);
+ }
+
+ suspend_set_ops(&omap_pm_ops);
+ pm_idle = omap2_pm_idle;
+
+ return 0;
+}
+
+late_initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
new file mode 100644
index 0000000..841d4c5
--- /dev/null
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -0,0 +1,710 @@
+/*
+ * OMAP3 Power Management Routines
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Jouni Hogander
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include <mach/sram.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/control.h>
+#include <mach/serial.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#include "prm.h"
+#include "pm.h"
+
+struct power_state {
+ struct powerdomain *pwrdm;
+ u32 next_state;
+ u32 saved_state;
+ struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+static void (*_omap_sram_idle)(u32 *addr, int save_state);
+
+static struct powerdomain *mpu_pwrdm;
+
+/* PRCM Interrupt Handler for wakeups */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+ u32 wkst, irqstatus_mpu;
+ u32 fclk, iclk;
+
+ /* WKUP */
+ wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+ fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
+ prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
+ while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
+ cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+ }
+
+ /* CORE */
+ wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
+ if (wkst) {
+ iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+ fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
+ prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
+ while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
+ cpu_relax();
+ cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
+ cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
+ }
+ wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
+ if (wkst) {
+ iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+ fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
+ while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
+ cpu_relax();
+ cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
+ cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ }
+
+ /* PER */
+ wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+ fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
+ prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
+ while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
+ cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+ }
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ /* USBHOST */
+ wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
+ PM_WKST);
+ while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ }
+ }
+
+ irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
+ cpu_relax();
+
+ return IRQ_HANDLED;
+}
+
+static void omap_sram_idle(void)
+{
+ /* Variable to tell what needs to be saved and restored
+ * in omap_sram_idle*/
+ /* save_state = 0 => Nothing to save and restored */
+ /* save_state = 1 => Only L1 and logic lost */
+ /* save_state = 2 => Only L2 lost */
+ /* save_state = 3 => L1, L2 and logic lost */
+ int save_state = 0, mpu_next_state;
+
+ if (!_omap_sram_idle)
+ return;
+
+ mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+ switch (mpu_next_state) {
+ case PWRDM_POWER_RET:
+ /* No need to save context */
+ save_state = 0;
+ break;
+ default:
+ /* Invalid state */
+ printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+ return;
+ }
+ omap2_gpio_prepare_for_retention();
+ omap_uart_prepare_idle(0);
+ omap_uart_prepare_idle(1);
+ omap_uart_prepare_idle(2);
+
+ _omap_sram_idle(NULL, save_state);
+ cpu_init();
+
+ omap_uart_resume_idle(2);
+ omap_uart_resume_idle(1);
+ omap_uart_resume_idle(0);
+ omap2_gpio_resume_after_retention();
+}
+
+/*
+ * Check if functional clocks are enabled before entering
+ * sleep. This function could be behind CONFIG_PM_DEBUG
+ * when all drivers are configuring their sysconfig registers
+ * properly and using their clocks properly.
+ */
+static int omap3_fclks_active(void)
+{
+ u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
+ fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+
+ fck_core1 = cm_read_mod_reg(CORE_MOD,
+ CM_FCLKEN1);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ fck_core3 = cm_read_mod_reg(CORE_MOD,
+ OMAP3430ES2_CM_FCLKEN3);
+ fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+ CM_FCLKEN);
+ fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ } else
+ fck_sgx = cm_read_mod_reg(GFX_MOD,
+ OMAP3430ES2_CM_FCLKEN3);
+ fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
+ CM_FCLKEN);
+ fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
+ CM_FCLKEN);
+ fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
+ CM_FCLKEN);
+
+ /* Ignore UART clocks. These are handled by UART core (serial.c) */
+ fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
+ fck_per &= ~OMAP3430_EN_UART3;
+
+ if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
+ fck_cam | fck_per | fck_usbhost)
+ return 1;
+ return 0;
+}
+
+static int omap3_can_sleep(void)
+{
+ if (!omap_uart_can_sleep())
+ return 0;
+ if (omap3_fclks_active())
+ return 0;
+ return 1;
+}
+
+/* This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled. */
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+ u32 cur_state;
+ int sleep_switch = 0;
+ int ret = 0;
+
+ if (pwrdm == NULL || IS_ERR(pwrdm))
+ return -EINVAL;
+
+ while (!(pwrdm->pwrsts & (1 << state))) {
+ if (state == PWRDM_POWER_OFF)
+ return ret;
+ state--;
+ }
+
+ cur_state = pwrdm_read_next_pwrst(pwrdm);
+ if (cur_state == state)
+ return ret;
+
+ if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+ omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+ sleep_switch = 1;
+ pwrdm_wait_transition(pwrdm);
+ }
+
+ ret = pwrdm_set_next_pwrst(pwrdm, state);
+ if (ret) {
+ printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+ pwrdm->name);
+ goto err;
+ }
+
+ if (sleep_switch) {
+ omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+ pwrdm_wait_transition(pwrdm);
+ }
+
+err:
+ return ret;
+}
+
+static void omap3_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ if (!omap3_can_sleep())
+ goto out;
+
+ if (omap_irq_pending())
+ goto out;
+
+ omap_sram_idle();
+
+out:
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap3_pm_prepare(void)
+{
+ disable_hlt();
+ return 0;
+}
+
+static int omap3_pm_suspend(void)
+{
+ struct power_state *pwrst;
+ int state, ret = 0;
+
+ /* Read current next_pwrsts */
+ list_for_each_entry(pwrst, &pwrst_list, node)
+ pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+ /* Set ones wanted by suspend */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+ goto restore;
+ if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
+ goto restore;
+ }
+
+ omap_uart_prepare_suspend();
+ omap_sram_idle();
+
+restore:
+ /* Restore next_pwrsts */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+ state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+ if (state > pwrst->next_state) {
+ printk(KERN_INFO "Powerdomain (%s) didn't enter "
+ "target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
+ ret = -1;
+ }
+ }
+ if (ret)
+ printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+ else
+ printk(KERN_INFO "Successfully put all powerdomains "
+ "to target state\n");
+
+ return ret;
+}
+
+static int omap3_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap3_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void omap3_pm_finish(void)
+{
+ enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+ .prepare = omap3_pm_prepare,
+ .enter = omap3_pm_enter,
+ .finish = omap3_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+
+/**
+ * omap3_iva_idle(): ensure IVA is in idle so it can be put into
+ * retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle. This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ *
+ **/
+static void __init omap3_iva_idle(void)
+{
+ /* ensure IVA2 clock is disabled */
+ cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* if no clock activity, nothing else to do */
+ if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+ OMAP3430_CLKACTIVITY_IVA2_MASK))
+ return;
+
+ /* Reset IVA2 */
+ prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+ OMAP3430_RST2_IVA2 |
+ OMAP3430_RST3_IVA2,
+ OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+ /* Enable IVA2 clock */
+ cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+ OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Set IVA2 boot mode to 'idle' */
+ omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+ OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+ /* Un-reset IVA2 */
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+ /* Disable IVA2 clock */
+ cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Reset IVA2 */
+ prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+ OMAP3430_RST2_IVA2 |
+ OMAP3430_RST3_IVA2,
+ OMAP3430_IVA2_MOD, RM_RSTCTRL);
+}
+
+static void __init omap3_d2d_idle(void)
+{
+ u16 mask, padconf;
+
+ /* In a stand alone OMAP3430 where there is not a stacked
+ * modem for the D2D Idle Ack and D2D MStandby must be pulled
+ * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+ * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
+ mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+
+ /* reset modem */
+ prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+ CORE_MOD, RM_RSTCTRL);
+ prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+}
+
+static void __init prcm_setup_regs(void)
+{
+ /* XXX Reset all wkdeps. This should be done when initializing
+ * powerdomains */
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+ } else
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
+ /*
+ * Enable interface clock autoidle for all modules.
+ * Note that in the long run this should be done by clockfw
+ */
+ cm_write_mod_reg(
+ OMAP3430_AUTO_MODEM |
+ OMAP3430ES2_AUTO_MMC3 |
+ OMAP3430ES2_AUTO_ICR |
+ OMAP3430_AUTO_AES2 |
+ OMAP3430_AUTO_SHA12 |
+ OMAP3430_AUTO_DES2 |
+ OMAP3430_AUTO_MMC2 |
+ OMAP3430_AUTO_MMC1 |
+ OMAP3430_AUTO_MSPRO |
+ OMAP3430_AUTO_HDQ |
+ OMAP3430_AUTO_MCSPI4 |
+ OMAP3430_AUTO_MCSPI3 |
+ OMAP3430_AUTO_MCSPI2 |
+ OMAP3430_AUTO_MCSPI1 |
+ OMAP3430_AUTO_I2C3 |
+ OMAP3430_AUTO_I2C2 |
+ OMAP3430_AUTO_I2C1 |
+ OMAP3430_AUTO_UART2 |
+ OMAP3430_AUTO_UART1 |
+ OMAP3430_AUTO_GPT11 |
+ OMAP3430_AUTO_GPT10 |
+ OMAP3430_AUTO_MCBSP5 |
+ OMAP3430_AUTO_MCBSP1 |
+ OMAP3430ES1_AUTO_FAC | /* This is es1 only */
+ OMAP3430_AUTO_MAILBOXES |
+ OMAP3430_AUTO_OMAPCTRL |
+ OMAP3430ES1_AUTO_FSHOSTUSB |
+ OMAP3430_AUTO_HSOTGUSB |
+ OMAP3430_AUTO_SAD2D |
+ OMAP3430_AUTO_SSI,
+ CORE_MOD, CM_AUTOIDLE1);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_PKA |
+ OMAP3430_AUTO_AES1 |
+ OMAP3430_AUTO_RNG |
+ OMAP3430_AUTO_SHA11 |
+ OMAP3430_AUTO_DES1,
+ CORE_MOD, CM_AUTOIDLE2);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ cm_write_mod_reg(
+ OMAP3430_AUTO_MAD2D |
+ OMAP3430ES2_AUTO_USBTLL,
+ CORE_MOD, CM_AUTOIDLE3);
+ }
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_WDT2 |
+ OMAP3430_AUTO_WDT1 |
+ OMAP3430_AUTO_GPIO1 |
+ OMAP3430_AUTO_32KSYNC |
+ OMAP3430_AUTO_GPT12 |
+ OMAP3430_AUTO_GPT1 ,
+ WKUP_MOD, CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_DSS,
+ OMAP3430_DSS_MOD,
+ CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_CAM,
+ OMAP3430_CAM_MOD,
+ CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_GPIO6 |
+ OMAP3430_AUTO_GPIO5 |
+ OMAP3430_AUTO_GPIO4 |
+ OMAP3430_AUTO_GPIO3 |
+ OMAP3430_AUTO_GPIO2 |
+ OMAP3430_AUTO_WDT3 |
+ OMAP3430_AUTO_UART3 |
+ OMAP3430_AUTO_GPT9 |
+ OMAP3430_AUTO_GPT8 |
+ OMAP3430_AUTO_GPT7 |
+ OMAP3430_AUTO_GPT6 |
+ OMAP3430_AUTO_GPT5 |
+ OMAP3430_AUTO_GPT4 |
+ OMAP3430_AUTO_GPT3 |
+ OMAP3430_AUTO_GPT2 |
+ OMAP3430_AUTO_MCBSP4 |
+ OMAP3430_AUTO_MCBSP3 |
+ OMAP3430_AUTO_MCBSP2,
+ OMAP3430_PER_MOD,
+ CM_AUTOIDLE);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ cm_write_mod_reg(
+ OMAP3430ES2_AUTO_USBHOST,
+ OMAP3430ES2_USBHOST_MOD,
+ CM_AUTOIDLE);
+ }
+
+ /*
+ * Set all plls to autoidle. This is needed until autoidle is
+ * enabled by clockfw
+ */
+ cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+ OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+ cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+ MPU_MOD,
+ CM_AUTOIDLE2);
+ cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+ (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
+ PLL_MOD,
+ CM_AUTOIDLE);
+ cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+ PLL_MOD,
+ CM_AUTOIDLE2);
+
+ /*
+ * Enable control of expternal oscillator through
+ * sys_clkreq. In the long run clock framework should
+ * take care of this.
+ */
+ prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+ 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ /* setup wakup source */
+ prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
+ OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+ WKUP_MOD, PM_WKEN);
+ /* No need to write EN_IO, that is always enabled */
+ prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
+ OMAP3430_EN_GPT12,
+ WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+ /* For some reason IO doesn't generate wakeup event even if
+ * it is selected to mpu wakeup goup */
+ prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+ OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+ /* Don't attach IVA interrupts */
+ prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+ /* Clear any pending 'reset' flags */
+ prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+ /* Clear any pending PRCM interrupts */
+ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ omap3_iva_idle();
+ omap3_d2d_idle();
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm)
+{
+ struct power_state *pwrst;
+
+ if (!pwrdm->pwrsts)
+ return 0;
+
+ pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+ if (!pwrst)
+ return -ENOMEM;
+ pwrst->pwrdm = pwrdm;
+ pwrst->next_state = PWRDM_POWER_RET;
+ list_add(&pwrst->node, &pwrst_list);
+
+ if (pwrdm_has_hdwr_sar(pwrdm))
+ pwrdm_enable_hdwr_sar(pwrdm);
+
+ return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/*
+ * Enable hw supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+ omap2_clkdm_allow_idle(clkdm);
+ else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+ atomic_read(&clkdm->usecount) == 0)
+ omap2_clkdm_sleep(clkdm);
+ return 0;
+}
+
+int __init omap3_pm_init(void)
+{
+ struct power_state *pwrst, *tmp;
+ int ret;
+
+ if (!cpu_is_omap34xx())
+ return -ENODEV;
+
+ printk(KERN_ERR "Power Management for TI OMAP3.\n");
+
+ /* XXX prcm_setup_regs needs to be before enabling hw
+ * supervised mode for powerdomains */
+ prcm_setup_regs();
+
+ ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
+ (irq_handler_t)prcm_interrupt_handler,
+ IRQF_DISABLED, "prcm", NULL);
+ if (ret) {
+ printk(KERN_ERR "request_irq failed to register for 0x%x\n",
+ INT_34XX_PRCM_MPU_IRQ);
+ goto err1;
+ }
+
+ ret = pwrdm_for_each(pwrdms_setup);
+ if (ret) {
+ printk(KERN_ERR "Failed to setup powerdomains\n");
+ goto err2;
+ }
+
+ (void) clkdm_for_each(clkdms_setup);
+
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+ if (mpu_pwrdm == NULL) {
+ printk(KERN_ERR "Failed to get mpu_pwrdm\n");
+ goto err2;
+ }
+
+ _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+ omap34xx_cpu_suspend_sz);
+
+ suspend_set_ops(&omap_pm_ops);
+
+ pm_idle = omap3_pm_idle;
+
+err1:
+ return ret;
+err2:
+ free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+ list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
+ list_del(&pwrst->node);
+ kfree(pwrst);
+ }
+ return ret;
+}
+
+late_initcall(omap3_pm_init);
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 812d50e..cb1ae84 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -276,6 +276,8 @@
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
#define OMAP3430_EN_GPIO1 (1 << 3)
#define OMAP3430_EN_GPIO1_SHIFT 3
+#define OMAP3430_EN_GPT12 (1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT 1
#define OMAP3430_EN_GPT1 (1 << 0)
#define OMAP3430_EN_GPT1_SHIFT 0
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 826d326b8..9937e28 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -16,17 +16,12 @@
#include "prcm-common.h"
-#ifndef __ASSEMBLER__
-#define OMAP_PRM_REGADDR(module, reg) \
- IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
-#else
#define OMAP2420_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
#define OMAP34XX_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-#endif
/*
* Architecture-specific global PRM registers
@@ -38,80 +33,132 @@
*
*/
-/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
-#define OMAP24XX_PRCM_VOLTCTRL_OFFSET 0x0050
-#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+#define OMAP2_PRCM_REVISION_OFFSET 0x0000
+#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
+#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
-/* 242x GR_MOD registers, use these only for assembly code */
-#define OMAP242X_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP242X_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
-/* 243x GR_MOD registers, use these only for assembly code */
-#define OMAP243X_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP243X_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
+#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
+#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
+#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
+#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
+#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
-/* These will disappear */
-#define OMAP24XX_PRCM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP24XX_PRCM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP24XX_PRCM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP24XX_PRCM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
+#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
-#define OMAP24XX_PRCM_VOLTST OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP24XX_PRCM_CLKSRC_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP24XX_PRCM_CLKCFG_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP24XX_PRCM_CLKCFG_STATUS OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP24XX_PRCM_VOLTSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP24XX_PRCM_CLKSSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP24XX_PRCM_POLCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
+#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
-#define OMAP3430_PRM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3430_PRM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
+#define OMAP3_PRM_REVISION_OFFSET 0x0004
+#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
+#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
-#define OMAP3430_PRM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3430_PRM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
-#define OMAP3430_PRM_VC_SMPS_SA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3430_PRM_VC_CH_CONF OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3430_PRM_VC_I2C_CFG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3430_PRM_VC_BYPASS_VAL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3430_PRM_RSTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3430_PRM_RSTTIME OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3430_PRM_RSTST OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3430_PRM_VOLTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3430_PRM_SRAM_PCHARGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3430_PRM_CLKSRC_CTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3430_PRM_VOLTSETUP1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3430_PRM_VOLTOFFSET OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3430_PRM_CLKSETUP OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3430_PRM_POLCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3430_PRM_VOLTSETUP2 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3430_PRM_VP1_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3430_PRM_VP1_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3430_PRM_VP1_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3430_PRM_VP1_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3430_PRM_VP1_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3430_PRM_VP1_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3430_PRM_VP2_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3430_PRM_VP2_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3430_PRM_VP2_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3430_PRM_VP2_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3430_PRM_VP2_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3430_PRM_VP2_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
+#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
+#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
+#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
+#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
+#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET 0x0058
+#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
+#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
+#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
+#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
+#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
+#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
+#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
+#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
+#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
+#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
+#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-#define OMAP3430_PRM_CLKSEL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3430_PRM_CLKOUT_CTRL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
+#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific PRM registers from PRM_BASE + domain offset
@@ -156,9 +203,11 @@
#define OMAP3430_PM_MPUGRPSEL 0x00a4
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
#define OMAP3430_PM_IVAGRPSEL 0x00a8
#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
#define OMAP3430_PM_PREPWSTST 0x00e8
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 0000000..02e1c2d
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,55 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+ [0] = {
+ .rate = 166000000,
+ .actim_ctrla = 0x9a9db4c6,
+ .actim_ctrlb = 0x00011217,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 165941176,
+ .actim_ctrla = 0x9a9db4c6,
+ .actim_ctrlb = 0x00011217,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 83000000,
+ .actim_ctrla = 0x51512283,
+ .actim_ctrlb = 0x0001120c,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [3] = {
+ .rate = 82970588,
+ .actim_ctrla = 0x51512283,
+ .actim_ctrlb = 0x0001120c,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
new file mode 100644
index 0000000..3751d29
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -0,0 +1,54 @@
+/*
+ * SDRC register values for the Qimonda HYB18M512160AF-6
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+
+#include <mach/sdrc.h>
+
+/* Qimonda HYB18M512160AF-6 */
+static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
+ [0] = {
+ .rate = 166000000,
+ .actim_ctrla = 0x629db4c6,
+ .actim_ctrlb = 0x00012214,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 165941176,
+ .actim_ctrla = 0x629db4c6,
+ .actim_ctrlb = 0x00012214,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 83000000,
+ .actim_ctrla = 0x31512283,
+ .actim_ctrlb = 0x0001220a,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000022,
+ },
+ [3] = {
+ .rate = 82970588,
+ .actim_ctrla = 0x31512283,
+ .actim_ctrlb = 0x0001220a,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000022,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2a30060..2045441 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -37,6 +37,10 @@
void __iomem *omap2_sdrc_base;
void __iomem *omap2_sms_base;
+/* SDRC_POWER register bits */
+#define SDRC_POWER_EXTCLKDIS_SHIFT 3
+#define SDRC_POWER_PWDENA_SHIFT 2
+#define SDRC_POWER_PAGEPOLICY_SHIFT 0
/**
* omap2_sdrc_get_params - return SDRC register values for a given clock rate
@@ -56,9 +60,12 @@
{
struct omap_sdrc_params *sp;
+ if (!sdrc_init_params)
+ return NULL;
+
sp = sdrc_init_params;
- while (sp->rate != r)
+ while (sp->rate && sp->rate != r)
sp++;
if (!sp->rate)
@@ -74,7 +81,14 @@
omap2_sms_base = omap2_globals->sms;
}
-/* turn on smart idle modes for SDRAM scheduler and controller */
+/**
+ * omap2_sdrc_init - initialize SMS, SDRC devices on boot
+ * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ *
+ * Turn on smart idle modes for SDRAM scheduler and controller.
+ * Program a known-good configuration for the SDRC to deal with buggy
+ * bootloaders.
+ */
void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
{
u32 l;
@@ -90,4 +104,10 @@
sdrc_write_reg(l, SDRC_SYSCONFIG);
sdrc_init_params = sp;
+
+ /* XXX Enable SRFRONIDLEREQ here also? */
+ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
+ (1 << SDRC_POWER_PWDENA_SHIFT) |
+ (1 << SDRC_POWER_PAGEPOLICY_SHIFT);
+ sdrc_write_reg(l, SDRC_POWER);
}
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 0afdad5..feaec7e 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -99,7 +99,10 @@
m_type = omap2xxx_sdrc_get_type();
local_irq_save(flags);
- __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+ if (cpu_is_omap2420())
+ __raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+ else
+ __raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
curr_perf_level = level;
local_irq_restore(flags);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 4dcf39c2..b094c15 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -6,8 +6,13 @@
* Copyright (C) 2005-2008 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
+ * Major rework for PM support by Kevin Hilman
+ *
* Based off of arch/arm/mach-omap/omap1/serial.c
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
+ *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -21,9 +26,50 @@
#include <mach/common.h>
#include <mach/board.h>
+#include <mach/clock.h>
+#include <mach/control.h>
-static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
-static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
+#include "prm.h"
+#include "pm.h"
+#include "prm-regbits-34xx.h"
+
+#define UART_OMAP_WER 0x17 /* Wake-up enable register */
+
+#define DEFAULT_TIMEOUT (5 * HZ)
+
+struct omap_uart_state {
+ int num;
+ int can_sleep;
+ struct timer_list timer;
+ u32 timeout;
+
+ void __iomem *wk_st;
+ void __iomem *wk_en;
+ u32 wk_mask;
+ u32 padconf;
+
+ struct clk *ick;
+ struct clk *fck;
+ int clocked;
+
+ struct plat_serial8250_port *p;
+ struct list_head node;
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+ int context_valid;
+
+ /* Registers to be saved/restored for OFF-mode */
+ u16 dll;
+ u16 dlh;
+ u16 ier;
+ u16 sysc;
+ u16 scr;
+ u16 wer;
+#endif
+};
+
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
+static LIST_HEAD(uart_list);
static struct plat_serial8250_port serial_platform_data[] = {
{
@@ -74,33 +120,369 @@
* properly. Note that the TX watermark initialization may not be needed
* once the 8250.c watermark handling code is merged.
*/
-static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+static inline void __init omap_uart_reset(struct omap_uart_state *uart)
{
+ struct plat_serial8250_port *p = uart->p;
+
serial_write_reg(p, UART_OMAP_MDR1, 0x07);
serial_write_reg(p, UART_OMAP_SCR, 0x08);
serial_write_reg(p, UART_OMAP_MDR1, 0x00);
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
}
-void omap_serial_enable_clocks(int enable)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+
+static int enable_off_mode; /* to be removed by full off-mode patches */
+
+static void omap_uart_save_context(struct omap_uart_state *uart)
{
- int i;
- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
- if (uart_ick[i] && uart_fck[i]) {
- if (enable) {
- clk_enable(uart_ick[i]);
- clk_enable(uart_fck[i]);
- } else {
- clk_disable(uart_ick[i]);
- clk_disable(uart_fck[i]);
- }
+ u16 lcr = 0;
+ struct plat_serial8250_port *p = uart->p;
+
+ if (!enable_off_mode)
+ return;
+
+ lcr = serial_read_reg(p, UART_LCR);
+ serial_write_reg(p, UART_LCR, 0xBF);
+ uart->dll = serial_read_reg(p, UART_DLL);
+ uart->dlh = serial_read_reg(p, UART_DLM);
+ serial_write_reg(p, UART_LCR, lcr);
+ uart->ier = serial_read_reg(p, UART_IER);
+ uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
+ uart->scr = serial_read_reg(p, UART_OMAP_SCR);
+ uart->wer = serial_read_reg(p, UART_OMAP_WER);
+
+ uart->context_valid = 1;
+}
+
+static void omap_uart_restore_context(struct omap_uart_state *uart)
+{
+ u16 efr = 0;
+ struct plat_serial8250_port *p = uart->p;
+
+ if (!enable_off_mode)
+ return;
+
+ if (!uart->context_valid)
+ return;
+
+ uart->context_valid = 0;
+
+ serial_write_reg(p, UART_OMAP_MDR1, 0x7);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ efr = serial_read_reg(p, UART_EFR);
+ serial_write_reg(p, UART_EFR, UART_EFR_ECB);
+ serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+ serial_write_reg(p, UART_IER, 0x0);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(p, UART_DLL, uart->dll);
+ serial_write_reg(p, UART_DLM, uart->dlh);
+ serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+ serial_write_reg(p, UART_IER, uart->ier);
+ serial_write_reg(p, UART_FCR, 0xA1);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(p, UART_EFR, efr);
+ serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
+ serial_write_reg(p, UART_OMAP_SCR, uart->scr);
+ serial_write_reg(p, UART_OMAP_WER, uart->wer);
+ serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+ serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+}
+#else
+static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
+static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
+
+static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
+{
+ if (uart->clocked)
+ return;
+
+ clk_enable(uart->ick);
+ clk_enable(uart->fck);
+ uart->clocked = 1;
+ omap_uart_restore_context(uart);
+}
+
+#ifdef CONFIG_PM
+
+static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
+{
+ if (!uart->clocked)
+ return;
+
+ omap_uart_save_context(uart);
+ uart->clocked = 0;
+ clk_disable(uart->ick);
+ clk_disable(uart->fck);
+}
+
+static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
+ int enable)
+{
+ struct plat_serial8250_port *p = uart->p;
+ u16 sysc;
+
+ sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
+ if (enable)
+ sysc |= 0x2 << 3;
+ else
+ sysc |= 0x1 << 3;
+
+ serial_write_reg(p, UART_OMAP_SYSC, sysc);
+}
+
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+ omap_uart_enable_clocks(uart);
+
+ omap_uart_smart_idle_enable(uart, 0);
+ uart->can_sleep = 0;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ del_timer(&uart->timer);
+}
+
+static void omap_uart_allow_sleep(struct omap_uart_state *uart)
+{
+ if (!uart->clocked)
+ return;
+
+ omap_uart_smart_idle_enable(uart, 1);
+ uart->can_sleep = 1;
+ del_timer(&uart->timer);
+}
+
+static void omap_uart_idle_timer(unsigned long data)
+{
+ struct omap_uart_state *uart = (struct omap_uart_state *)data;
+
+ omap_uart_allow_sleep(uart);
+}
+
+void omap_uart_prepare_idle(int num)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (num == uart->num && uart->can_sleep) {
+ omap_uart_disable_clocks(uart);
+ return;
}
}
}
+void omap_uart_resume_idle(int num)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (num == uart->num) {
+ omap_uart_enable_clocks(uart);
+
+ /* Check for IO pad wakeup */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 p = omap_ctrl_readw(uart->padconf);
+
+ if (p & OMAP3_PADCONF_WAKEUPEVENT0)
+ omap_uart_block_sleep(uart);
+ }
+
+ /* Check for normal UART wakeup */
+ if (__raw_readl(uart->wk_st) & uart->wk_mask)
+ omap_uart_block_sleep(uart);
+
+ return;
+ }
+ }
+}
+
+void omap_uart_prepare_suspend(void)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ omap_uart_allow_sleep(uart);
+ }
+}
+
+int omap_uart_can_sleep(void)
+{
+ struct omap_uart_state *uart;
+ int can_sleep = 1;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (!uart->clocked)
+ continue;
+
+ if (!uart->can_sleep) {
+ can_sleep = 0;
+ continue;
+ }
+
+ /* This UART can now safely sleep. */
+ omap_uart_allow_sleep(uart);
+ }
+
+ return can_sleep;
+}
+
+/**
+ * omap_uart_interrupt()
+ *
+ * This handler is used only to detect that *any* UART interrupt has
+ * occurred. It does _nothing_ to handle the interrupt. Rather,
+ * any UART interrupt will trigger the inactivity timer so the
+ * UART will not idle or sleep for its timeout period.
+ *
+ **/
+static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
+{
+ struct omap_uart_state *uart = dev_id;
+
+ omap_uart_block_sleep(uart);
+
+ return IRQ_NONE;
+}
+
+static u32 sleep_timeout = DEFAULT_TIMEOUT;
+
+static void omap_uart_idle_init(struct omap_uart_state *uart)
+{
+ u32 v;
+ struct plat_serial8250_port *p = uart->p;
+ int ret;
+
+ uart->can_sleep = 0;
+ uart->timeout = sleep_timeout;
+ setup_timer(&uart->timer, omap_uart_idle_timer,
+ (unsigned long) uart);
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ omap_uart_smart_idle_enable(uart, 0);
+
+ if (cpu_is_omap34xx()) {
+ u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+ u32 wk_mask = 0;
+ u32 padconf = 0;
+
+ uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
+ uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
+ switch (uart->num) {
+ case 0:
+ wk_mask = OMAP3430_ST_UART1_MASK;
+ padconf = 0x182;
+ break;
+ case 1:
+ wk_mask = OMAP3430_ST_UART2_MASK;
+ padconf = 0x17a;
+ break;
+ case 2:
+ wk_mask = OMAP3430_ST_UART3_MASK;
+ padconf = 0x19e;
+ break;
+ }
+ uart->wk_mask = wk_mask;
+ uart->padconf = padconf;
+ } else if (cpu_is_omap24xx()) {
+ u32 wk_mask = 0;
+
+ if (cpu_is_omap2430()) {
+ uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+ uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
+ } else if (cpu_is_omap2420()) {
+ uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+ uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
+ }
+ switch (uart->num) {
+ case 0:
+ wk_mask = OMAP24XX_ST_UART1_MASK;
+ break;
+ case 1:
+ wk_mask = OMAP24XX_ST_UART2_MASK;
+ break;
+ case 2:
+ wk_mask = OMAP24XX_ST_UART3_MASK;
+ break;
+ }
+ uart->wk_mask = wk_mask;
+ } else {
+ uart->wk_en = 0;
+ uart->wk_st = 0;
+ uart->wk_mask = 0;
+ uart->padconf = 0;
+ }
+
+ /* Set wake-enable bit */
+ if (uart->wk_en && uart->wk_mask) {
+ v = __raw_readl(uart->wk_en);
+ v |= uart->wk_mask;
+ __raw_writel(v, uart->wk_en);
+ }
+
+ /* Ensure IOPAD wake-enables are set */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 v;
+
+ v = omap_ctrl_readw(uart->padconf);
+ v |= OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, uart->padconf);
+ }
+
+ p->flags |= UPF_SHARE_IRQ;
+ ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
+ "serial idle", (void *)uart);
+ WARN_ON(ret);
+}
+
+static ssize_t sleep_timeout_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%u\n", sleep_timeout / HZ);
+}
+
+static ssize_t sleep_timeout_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ struct omap_uart_state *uart;
+ unsigned int value;
+
+ if (sscanf(buf, "%u", &value) != 1) {
+ printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+ return -EINVAL;
+ }
+ sleep_timeout = value * HZ;
+ list_for_each_entry(uart, &uart_list, node) {
+ uart->timeout = sleep_timeout;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ /* A zero value means disable timeout feature */
+ omap_uart_block_sleep(uart);
+ }
+ return n;
+}
+
+static struct kobj_attribute sleep_timeout_attr =
+ __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+
+#else
+static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM */
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
void __init omap_serial_init(void)
{
- int i;
+ int i, err;
const struct omap_uart_config *info;
char name[16];
@@ -114,9 +496,14 @@
if (info == NULL)
return;
+ if (cpu_is_omap44xx()) {
+ for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
+ serial_platform_data[i].irq += 32;
+ }
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct plat_serial8250_port *p = serial_platform_data + i;
+ struct omap_uart_state *uart = &omap_uart[i];
if (!(info->enabled_uarts & (1 << i))) {
p->membase = NULL;
@@ -125,35 +512,39 @@
}
sprintf(name, "uart%d_ick", i+1);
- uart_ick[i] = clk_get(NULL, name);
- if (IS_ERR(uart_ick[i])) {
+ uart->ick = clk_get(NULL, name);
+ if (IS_ERR(uart->ick)) {
printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
- uart_ick[i] = NULL;
- } else
- clk_enable(uart_ick[i]);
+ uart->ick = NULL;
+ }
sprintf(name, "uart%d_fck", i+1);
- uart_fck[i] = clk_get(NULL, name);
- if (IS_ERR(uart_fck[i])) {
+ uart->fck = clk_get(NULL, name);
+ if (IS_ERR(uart->fck)) {
printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
- uart_fck[i] = NULL;
- } else
- clk_enable(uart_fck[i]);
+ uart->fck = NULL;
+ }
- omap_serial_reset(p);
+ if (!uart->ick || !uart->fck)
+ continue;
+
+ uart->num = i;
+ p->private_data = uart;
+ uart->p = p;
+ list_add(&uart->node, &uart_list);
+
+ omap_uart_enable_clocks(uart);
+ omap_uart_reset(uart);
+ omap_uart_idle_init(uart);
}
+
+ err = platform_device_register(&serial_device);
+
+#ifdef CONFIG_PM
+ if (!err)
+ err = sysfs_create_file(&serial_device.dev.kobj,
+ &sleep_timeout_attr.attr);
+#endif
+
}
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static int __init omap_init(void)
-{
- return platform_device_register(&serial_device);
-}
-arch_initcall(omap_init);
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index bf9e961..130aadb 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,7 +28,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
-#include <mach/pm.h>
#include <mach/omap24xx.h>
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
new file mode 100644
index 0000000..e5e2553
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2007
+ * Texas Instruments
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "sdrc.h"
+
+#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \
+ OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
+ OMAP3430_PM_PREPWSTST)
+#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
+ * available */
+#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\
+ OMAP343X_CONTROL_MEM_WKUP +\
+ SCRATCHPAD_MEM_OFFS)
+#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+
+ .text
+/* Function call to get the restore pointer for resume from OFF */
+ENTRY(get_restore_pointer)
+ stmfd sp!, {lr} @ save registers on stack
+ adr r0, restore
+ ldmfd sp!, {pc} @ restore regs and return
+ENTRY(get_restore_pointer_sz)
+ .word . - get_restore_pointer_sz
+/*
+ * Forces OMAP into idle state
+ *
+ * omap34xx_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ * wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap34xx_cpu_suspend)
+ stmfd sp!, {r0-r12, lr} @ save registers on stack
+loop:
+ /*b loop*/ @Enable to debug by stepping through code
+ /* r0 contains restore pointer in sdram */
+ /* r1 contains information about saving context */
+ ldr r4, sdrc_power @ read the SDRC_POWER register
+ ldr r5, [r4] @ read the contents of SDRC_POWER
+ orr r5, r5, #0x40 @ enable self refresh on idle req
+ str r5, [r4] @ write back to SDRC_POWER register
+
+ cmp r1, #0x0
+ /* If context save is required, do that and execute wfi */
+ bne save_context_wfi
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+ wfi @ wait for interrupt
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bl i_dll_wait
+
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+restore:
+ /* b restore*/ @ Enable to debug restore code
+ /* Check what was the reason for mpu reset and store the reason in r9*/
+ /* 1 - Only L1 and logic lost */
+ /* 2 - Only L2 lost - In this case, we wont be here */
+ /* 3 - Both L1 and L2 lost */
+ ldr r1, pm_pwstctrl_mpu
+ ldr r2, [r1]
+ and r2, r2, #0x3
+ cmp r2, #0x0 @ Check if target power state was OFF or RET
+ moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
+ movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
+ bne logic_l1_restore
+ /* Execute smi to invalidate L2 cache */
+ mov r12, #0x1 @ set up to invalide L2
+smi: .word 0xE1600070 @ Call SMI monitor (smieq)
+logic_l1_restore:
+ mov r1, #0
+ /* Invalidate all instruction caches to PoU
+ * and flush branch target cache */
+ mcr p15, 0, r1, c7, c5, 0
+
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldmia r3!, {r4-r6}
+ mov sp, r4
+ msr spsr_cxsf, r5
+ mov lr, r6
+
+ ldmia r3!, {r4-r9}
+ /* Coprocessor access Control Register */
+ mcr p15, 0, r4, c1, c0, 2
+
+ /* TTBR0 */
+ MCR p15, 0, r5, c2, c0, 0
+ /* TTBR1 */
+ MCR p15, 0, r6, c2, c0, 1
+ /* Translation table base control register */
+ MCR p15, 0, r7, c2, c0, 2
+ /*domain access Control Register */
+ MCR p15, 0, r8, c3, c0, 0
+ /* data fault status Register */
+ MCR p15, 0, r9, c5, c0, 0
+
+ ldmia r3!,{r4-r8}
+ /* instruction fault status Register */
+ MCR p15, 0, r4, c5, c0, 1
+ /*Data Auxiliary Fault Status Register */
+ MCR p15, 0, r5, c5, c1, 0
+ /*Instruction Auxiliary Fault Status Register*/
+ MCR p15, 0, r6, c5, c1, 1
+ /*Data Fault Address Register */
+ MCR p15, 0, r7, c6, c0, 0
+ /*Instruction Fault Address Register*/
+ MCR p15, 0, r8, c6, c0, 2
+ ldmia r3!,{r4-r7}
+
+ /* user r/w thread and process ID */
+ MCR p15, 0, r4, c13, c0, 2
+ /* user ro thread and process ID */
+ MCR p15, 0, r5, c13, c0, 3
+ /*Privileged only thread and process ID */
+ MCR p15, 0, r6, c13, c0, 4
+ /* cache size selection */
+ MCR p15, 2, r7, c0, c0, 0
+ ldmia r3!,{r4-r8}
+ /* Data TLB lockdown registers */
+ MCR p15, 0, r4, c10, c0, 0
+ /* Instruction TLB lockdown registers */
+ MCR p15, 0, r5, c10, c0, 1
+ /* Secure or Nonsecure Vector Base Address */
+ MCR p15, 0, r6, c12, c0, 0
+ /* FCSE PID */
+ MCR p15, 0, r7, c13, c0, 0
+ /* Context PID */
+ MCR p15, 0, r8, c13, c0, 1
+
+ ldmia r3!,{r4-r5}
+ /* primary memory remap register */
+ MCR p15, 0, r4, c10, c2, 0
+ /*normal memory remap register */
+ MCR p15, 0, r5, c10, c2, 1
+
+ /* Restore cpsr */
+ ldmia r3!,{r4} /*load CPSR from SDRAM*/
+ msr cpsr, r4 /*store cpsr */
+
+ /* Enabling MMU here */
+ mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
+ /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+ and r7, #0x7
+ cmp r7, #0x0
+ beq usettbr0
+ttbr_error:
+ /* More work needs to be done to support N[0:2] value other than 0
+ * So looping here so that the error can be detected
+ */
+ b ttbr_error
+usettbr0:
+ mrc p15, 0, r2, c2, c0, 0
+ ldr r5, ttbrbit_mask
+ and r2, r5
+ mov r4, pc
+ ldr r5, table_index_mask
+ and r4, r5 /* r4 = 31 to 20 bits of pc */
+ /* Extract the value to be written to table entry */
+ ldr r1, table_entry
+ add r1, r1, r4 /* r1 has value to be written to table entry*/
+ /* Getting the address of table entry to modify */
+ lsr r4, #18
+ add r2, r4 /* r2 has the location which needs to be modified */
+ /* Storing previous entry of location being modified */
+ ldr r5, scratchpad_base
+ ldr r4, [r2]
+ str r4, [r5, #0xC0]
+ /* Modify the table entry */
+ str r1, [r2]
+ /* Storing address of entry being modified
+ * - will be restored after enabling MMU */
+ ldr r5, scratchpad_base
+ str r2, [r5, #0xC4]
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
+ mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
+ mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
+ mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
+ /* Restore control register but dont enable caches here*/
+ /* Caches will be enabled after restoring MMU table entry */
+ ldmia r3!, {r4}
+ /* Store previous value of control register in scratchpad */
+ str r4, [r5, #0xC8]
+ ldr r2, cache_pred_disable_mask
+ and r4, r2
+ mcr p15, 0, r4, c1, c0, 0
+
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+save_context_wfi:
+ /*b save_context_wfi*/ @ enable to debug save code
+ mov r8, r0 /* Store SDRAM address in r8 */
+ /* Check what that target sleep state is:stored in r1*/
+ /* 1 - Only L1 and logic lost */
+ /* 2 - Only L2 lost */
+ /* 3 - Both L1 and L2 lost */
+ cmp r1, #0x2 /* Only L2 lost */
+ beq clean_l2
+ cmp r1, #0x1 /* L2 retained */
+ /* r9 stores whether to clean L2 or not*/
+ moveq r9, #0x0 /* Dont Clean L2 */
+ movne r9, #0x1 /* Clean L2 */
+l1_logic_lost:
+ /* Store sp and spsr to SDRAM */
+ mov r4, sp
+ mrs r5, spsr
+ mov r6, lr
+ stmia r8!, {r4-r6}
+ /* Save all ARM registers */
+ /* Coprocessor access control register */
+ mrc p15, 0, r6, c1, c0, 2
+ stmia r8!, {r6}
+ /* TTBR0, TTBR1 and Translation table base control */
+ mrc p15, 0, r4, c2, c0, 0
+ mrc p15, 0, r5, c2, c0, 1
+ mrc p15, 0, r6, c2, c0, 2
+ stmia r8!, {r4-r6}
+ /* Domain access control register, data fault status register,
+ and instruction fault status register */
+ mrc p15, 0, r4, c3, c0, 0
+ mrc p15, 0, r5, c5, c0, 0
+ mrc p15, 0, r6, c5, c0, 1
+ stmia r8!, {r4-r6}
+ /* Data aux fault status register, instruction aux fault status,
+ datat fault address register and instruction fault address register*/
+ mrc p15, 0, r4, c5, c1, 0
+ mrc p15, 0, r5, c5, c1, 1
+ mrc p15, 0, r6, c6, c0, 0
+ mrc p15, 0, r7, c6, c0, 2
+ stmia r8!, {r4-r7}
+ /* user r/w thread and process ID, user r/o thread and process ID,
+ priv only thread and process ID, cache size selection */
+ mrc p15, 0, r4, c13, c0, 2
+ mrc p15, 0, r5, c13, c0, 3
+ mrc p15, 0, r6, c13, c0, 4
+ mrc p15, 2, r7, c0, c0, 0
+ stmia r8!, {r4-r7}
+ /* Data TLB lockdown, instruction TLB lockdown registers */
+ mrc p15, 0, r5, c10, c0, 0
+ mrc p15, 0, r6, c10, c0, 1
+ stmia r8!, {r5-r6}
+ /* Secure or non secure vector base address, FCSE PID, Context PID*/
+ mrc p15, 0, r4, c12, c0, 0
+ mrc p15, 0, r5, c13, c0, 0
+ mrc p15, 0, r6, c13, c0, 1
+ stmia r8!, {r4-r6}
+ /* Primary remap, normal remap registers */
+ mrc p15, 0, r4, c10, c2, 0
+ mrc p15, 0, r5, c10, c2, 1
+ stmia r8!,{r4-r5}
+
+ /* Store current cpsr*/
+ mrs r2, cpsr
+ stmia r8!, {r2}
+
+ mrc p15, 0, r4, c1, c0, 0
+ /* save control register */
+ stmia r8!, {r4}
+clean_caches:
+ /* Clean Data or unified cache to POU*/
+ /* How to invalidate only L1 cache???? - #FIX_ME# */
+ /* mcr p15, 0, r11, c7, c11, 1 */
+ cmp r9, #1 /* Check whether L2 inval is required or not*/
+ bne skip_l2_inval
+clean_l2:
+ /* read clidr */
+ mrc p15, 1, r0, c0, c0, 1
+ /* extract loc from clidr */
+ ands r3, r0, #0x7000000
+ /* left align loc bit field */
+ mov r3, r3, lsr #23
+ /* if loc is 0, then no need to clean */
+ beq finished
+ /* start clean at cache level 0 */
+ mov r10, #0
+loop1:
+ /* work out 3x current cache level */
+ add r2, r10, r10, lsr #1
+ /* extract cache type bits from clidr*/
+ mov r1, r0, lsr r2
+ /* mask of the bits for current cache only */
+ and r1, r1, #7
+ /* see what cache we have at this level */
+ cmp r1, #2
+ /* skip if no cache, or just i-cache */
+ blt skip
+ /* select current cache level in cssr */
+ mcr p15, 2, r10, c0, c0, 0
+ /* isb to sych the new cssr&csidr */
+ isb
+ /* read the new csidr */
+ mrc p15, 1, r1, c0, c0, 0
+ /* extract the length of the cache lines */
+ and r2, r1, #7
+ /* add 4 (line length offset) */
+ add r2, r2, #4
+ ldr r4, assoc_mask
+ /* find maximum number on the way size */
+ ands r4, r4, r1, lsr #3
+ /* find bit position of way size increment */
+ clz r5, r4
+ ldr r7, numset_mask
+ /* extract max number of the index size*/
+ ands r7, r7, r1, lsr #13
+loop2:
+ mov r9, r4
+ /* create working copy of max way size*/
+loop3:
+ /* factor way and cache number into r11 */
+ orr r11, r10, r9, lsl r5
+ /* factor index number into r11 */
+ orr r11, r11, r7, lsl r2
+ /*clean & invalidate by set/way */
+ mcr p15, 0, r11, c7, c10, 2
+ /* decrement the way*/
+ subs r9, r9, #1
+ bge loop3
+ /*decrement the index */
+ subs r7, r7, #1
+ bge loop2
+skip:
+ add r10, r10, #2
+ /* increment cache number */
+ cmp r3, r10
+ bgt loop1
+finished:
+ /*swith back to cache level 0 */
+ mov r10, #0
+ /* select current cache level in cssr */
+ mcr p15, 2, r10, c0, c0, 0
+ isb
+skip_l2_inval:
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+ wfi @ wait for interrupt
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bl i_dll_wait
+ /* restore regs and return */
+ ldmfd sp!, {r0-r12, pc}
+
+i_dll_wait:
+ ldr r4, clk_stabilize_delay
+
+i_dll_delay:
+ subs r4, r4, #0x1
+ bne i_dll_delay
+ ldr r4, sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+ bx lr
+pm_prepwstst_core:
+ .word PM_PREPWSTST_CORE_V
+pm_prepwstst_mpu:
+ .word PM_PREPWSTST_MPU_V
+pm_pwstctrl_mpu:
+ .word PM_PWSTCTRL_MPU_P
+scratchpad_base:
+ .word SCRATCHPAD_BASE_P
+sdrc_power:
+ .word SDRC_POWER_V
+context_mem:
+ .word 0x803E3E14
+clk_stabilize_delay:
+ .word 0x000001FF
+assoc_mask:
+ .word 0x3ff
+numset_mask:
+ .word 0x7fff
+ttbrbit_mask:
+ .word 0xFFFFC000
+table_index_mask:
+ .word 0xFFF00000
+table_entry:
+ .word 0x00000C02
+cache_pred_disable_mask:
+ .word 0xFFFFE7FB
+ENTRY(omap34xx_cpu_suspend_sz)
+ .word . - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index af4bd34..bb29985 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -124,11 +124,11 @@
omap242x_sdi_sdrc_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
omap242x_sdi_prcm_voltctrl:
- .word OMAP242X_PRCM_VOLTCTRL
+ .word OMAP2420_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
omap242x_sdi_timer_32ksynct_cr:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_ddr_init_sz)
.word . - omap242x_sram_ddr_init
@@ -220,11 +220,11 @@
omap242x_srs_sdrc_rfr_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap242x_srs_prcm_voltctrl:
- .word OMAP242X_PRCM_VOLTCTRL
+ .word OMAP2420_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap242x_srs_timer_32ksynct:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_reprogram_sdrc_sz)
.word . - omap242x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@
ldmfd sp!, {r0-r12, pc} @ restore regs and return
omap242x_ssp_set_config:
- .word OMAP242X_PRCM_CLKCFG_CTRL
+ .word OMAP2420_PRCM_CLKCFG_CTRL
omap242x_ssp_pll_ctl:
.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
omap242x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 84363e2..9955abc 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -124,11 +124,11 @@
omap243x_sdi_sdrc_dlla_ctrl:
.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
omap243x_sdi_prcm_voltctrl:
- .word OMAP243X_PRCM_VOLTCTRL
+ .word OMAP2430_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
omap243x_sdi_timer_32ksynct_cr:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_ddr_init_sz)
.word . - omap243x_sram_ddr_init
@@ -220,11 +220,11 @@
omap243x_srs_sdrc_rfr_ctrl:
.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap243x_srs_prcm_voltctrl:
- .word OMAP243X_PRCM_VOLTCTRL
+ .word OMAP2430_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap243x_srs_timer_32ksynct:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_reprogram_sdrc_sz)
.word . - omap243x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@
ldmfd sp!, {r0-r12, pc} @ restore regs and return
omap243x_ssp_set_config:
- .word OMAP243X_PRCM_CLKCFG_CTRL
+ .word OMAP2430_PRCM_CLKCFG_CTRL
omap243x_ssp_pll_ctl:
.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
omap243x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 2c71461..c080c825 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -40,69 +40,74 @@
/*
* Change frequency of core dpll
* r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ * SDRC rates < 83MHz
*/
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
+ ldr r4, [sp, #52] @ pull extra args off the stack
+ dsb @ flush buffered writes to interconnect
cmp r3, #0x2
blne configure_sdrc
- cmp r3, #0x2
+ cmp r4, #0x1
+ bleq unlock_dll
blne lock_dll
- cmp r3, #0x1
- blne unlock_dll
bl sdram_in_selfrefresh @ put the SDRAM in self refresh
bl configure_core_dpll
bl enable_sdrc
- cmp r3, #0x1
- blne wait_dll_unlock
- cmp r3, #0x2
+ cmp r4, #0x1
+ bleq wait_dll_unlock
blne wait_dll_lock
cmp r3, #0x1
blne configure_sdrc
+ isb @ prevent speculative exec past here
mov r0, #0 @ return value
ldmfd sp!, {r1-r12, pc} @ restore regs and return
unlock_dll:
- ldr r4, omap3_sdrc_dlla_ctrl
- ldr r5, [r4]
- orr r5, r5, #0x4
- str r5, [r4]
+ ldr r11, omap3_sdrc_dlla_ctrl
+ ldr r12, [r11]
+ orr r12, r12, #0x4
+ str r12, [r11] @ (no OCP barrier needed)
bx lr
lock_dll:
- ldr r4, omap3_sdrc_dlla_ctrl
- ldr r5, [r4]
- bic r5, r5, #0x4
- str r5, [r4]
+ ldr r11, omap3_sdrc_dlla_ctrl
+ ldr r12, [r11]
+ bic r12, r12, #0x4
+ str r12, [r11] @ (no OCP barrier needed)
bx lr
sdram_in_selfrefresh:
- mov r5, #0x0 @ Move 0 to R5
- mcr p15, 0, r5, c7, c10, 5 @ memory barrier
- ldr r4, omap3_sdrc_power @ read the SDRC_POWER register
- ldr r5, [r4] @ read the contents of SDRC_POWER
- orr r5, r5, #0x40 @ enable self refresh on idle req
- str r5, [r4] @ write back to SDRC_POWER register
- ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
- ldr r5, [r4]
- bic r5, r5, #0x2 @ disable iclk bit for SRDC
- str r5, [r4]
+ ldr r11, omap3_sdrc_power @ read the SDRC_POWER register
+ ldr r12, [r11] @ read the contents of SDRC_POWER
+ mov r9, r12 @ keep a copy of SDRC_POWER bits
+ orr r12, r12, #0x40 @ enable self refresh on idle req
+ bic r12, r12, #0x4 @ clear PWDENA
+ str r12, [r11] @ write back to SDRC_POWER register
+ ldr r12, [r11] @ posted-write barrier for SDRC
+ ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
+ ldr r12, [r11]
+ bic r12, r12, #0x2 @ disable iclk bit for SDRC
+ str r12, [r11]
wait_sdrc_idle:
- ldr r4, omap3_cm_idlest1_core
- ldr r5, [r4]
- and r5, r5, #0x2 @ check for SDRC idle
- cmp r5, #2
+ ldr r11, omap3_cm_idlest1_core
+ ldr r12, [r11]
+ and r12, r12, #0x2 @ check for SDRC idle
+ cmp r12, #2
bne wait_sdrc_idle
bx lr
configure_core_dpll:
- ldr r4, omap3_cm_clksel1_pll
- ldr r5, [r4]
- ldr r6, core_m2_mask_val @ modify m2 for core dpll
- and r5, r5, r6
- orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val
- str r5, [r4]
- mov r5, #0x800 @ wait for the clock to stabilise
+ ldr r11, omap3_cm_clksel1_pll
+ ldr r12, [r11]
+ ldr r10, core_m2_mask_val @ modify m2 for core dpll
+ and r12, r12, r10
+ orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val
+ str r12, [r11]
+ ldr r12, [r11] @ posted-write barrier for CM
+ mov r12, #0x800 @ wait for the clock to stabilise
cmp r3, #2
bne wait_clk_stable
bx lr
wait_clk_stable:
- subs r5, r5, #1
+ subs r12, r12, #1
bne wait_clk_stable
nop
nop
@@ -116,42 +121,42 @@
nop
bx lr
enable_sdrc:
- ldr r4, omap3_cm_iclken1_core
- ldr r5, [r4]
- orr r5, r5, #0x2 @ enable iclk bit for SDRC
- str r5, [r4]
+ ldr r11, omap3_cm_iclken1_core
+ ldr r12, [r11]
+ orr r12, r12, #0x2 @ enable iclk bit for SDRC
+ str r12, [r11]
wait_sdrc_idle1:
- ldr r4, omap3_cm_idlest1_core
- ldr r5, [r4]
- and r5, r5, #0x2
- cmp r5, #0
+ ldr r11, omap3_cm_idlest1_core
+ ldr r12, [r11]
+ and r12, r12, #0x2
+ cmp r12, #0
bne wait_sdrc_idle1
- ldr r4, omap3_sdrc_power
- ldr r5, [r4]
- bic r5, r5, #0x40
- str r5, [r4]
+restore_sdrc_power_val:
+ ldr r11, omap3_sdrc_power
+ str r9, [r11] @ restore SDRC_POWER, no barrier needed
bx lr
wait_dll_lock:
- ldr r4, omap3_sdrc_dlla_status
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x4
+ ldr r11, omap3_sdrc_dlla_status
+ ldr r12, [r11]
+ and r12, r12, #0x4
+ cmp r12, #0x4
bne wait_dll_lock
bx lr
wait_dll_unlock:
- ldr r4, omap3_sdrc_dlla_status
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x0
+ ldr r11, omap3_sdrc_dlla_status
+ ldr r12, [r11]
+ and r12, r12, #0x4
+ cmp r12, #0x0
bne wait_dll_unlock
bx lr
configure_sdrc:
- ldr r4, omap3_sdrc_rfr_ctrl
- str r0, [r4]
- ldr r4, omap3_sdrc_actim_ctrla
- str r1, [r4]
- ldr r4, omap3_sdrc_actim_ctrlb
- str r2, [r4]
+ ldr r11, omap3_sdrc_rfr_ctrl
+ str r0, [r11]
+ ldr r11, omap3_sdrc_actim_ctrla
+ str r1, [r11]
+ ldr r11, omap3_sdrc_actim_ctrlb
+ str r2, [r11]
+ ldr r2, [r11] @ posted-write barrier for SDRC
bx lr
omap3_sdrc_power:
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index f36aba1..2ce474a 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -17,9 +17,10 @@
*
* Some parts based off of TI's 24xx code:
*
- * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
*
* Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -82,7 +83,8 @@
case CLOCK_EVT_MODE_PERIODIC:
period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
period -= 1;
-
+ if (cpu_is_omap44xx())
+ period = 0xff; /* FIXME: */
omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -145,6 +147,9 @@
"timer-gp: omap_dm_timer_set_source() failed\n");
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+ if (cpu_is_omap44xx())
+ /* Assuming 32kHz clk is driving GPT1 */
+ tick_rate = 32768; /* FIXME: */
pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
gptimer_id, tick_rate);
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 34a56a1..d85296d 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,10 +28,20 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/pm.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404)
+
+static void __init usb_musb_pm_init(void)
+{
+ /* Ensure force-idle mode for OTG controller */
+ if (cpu_is_omap34xx())
+ omap_writel(0, OTG_SYSCONFIG);
+}
+
+#ifdef CONFIG_USB_MUSB_SOC
+
static struct resource musb_resources[] = {
[0] = { /* start and end set dynamically */
.flags = IORESOURCE_MEM,
@@ -184,4 +194,13 @@
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;
}
+
+ usb_musb_pm_init();
}
+
+#else
+void __init usb_musb_init(void)
+{
+ usb_musb_pm_init();
+}
+#endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index db52d2c..49ae382 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -86,20 +86,3 @@
for (i = 0; i < num; i++)
clkdev_add(&clks[i]);
}
-
-int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
- struct device *dev)
-{
- struct clk *r = clk_get(dev, id);
- struct clk_lookup *l;
-
- if (!r)
- return -ENODEV;
-
- l = clkdev_alloc(r, alias, alias_dev_name);
- clk_put(r);
- if (!l)
- return -ENODEV;
- clkdev_add(l);
- return 0;
-}
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index fb13c82..8721b80 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -56,7 +56,6 @@
#define GPIO_NR_PALMLD_LED_AMBER 94
/* IDE */
-#define GPIO_NR_PALMLD_IDE_IRQ 95
#define GPIO_NR_PALMLD_IDE_RESET 98
#define GPIO_NR_PALMLD_IDE_PWEN 115
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 471a853..2e65f05 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -129,7 +129,7 @@
GPIO81_GPIO, /* wifi reset */
/* HDD */
- GPIO95_GPIO, /* HDD irq */
+ GPIO98_GPIO, /* HDD reset */
GPIO115_GPIO, /* HDD power */
/* MISC */
@@ -496,6 +496,14 @@
};
/******************************************************************************
+ * HDD
+ ******************************************************************************/
+static struct platform_device palmld_hdd = {
+ .name = "pata_palmld",
+ .id = -1,
+};
+
+/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmld_lcd_modes[] = {
@@ -559,6 +567,7 @@
&palmld_leds,
&power_supply,
&palmld_asoc,
+ &palmld_hdd,
};
static struct map_desc palmld_io_desc[] __initdata = {
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index b6ec106..bf35cfd 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -24,7 +24,6 @@
config REALVIEW_EB_ARM11MP_REVB
bool "Support ARM11MPCore RevB tile"
depends on REALVIEW_EB_ARM11MP
- default n
help
Enable support for the ARM11MPCore RevB tile on the Realview
platform. Since there are device address differences, a
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 7bea8ff..e13d094 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -7,5 +7,6 @@
obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o
obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o
obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 21c0863..59a337b 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -51,9 +51,6 @@
extern struct mmc_platform_data realview_mmc1_plat_data;
extern struct clcd_board clcd_plat_data;
extern void __iomem *gic_cpu_base_addr;
-#ifdef CONFIG_LOCAL_TIMERS
-extern void __iomem *twd_base;
-#endif
extern void __iomem *timer0_va_base;
extern void __iomem *timer1_va_base;
extern void __iomem *timer2_va_base;
diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h
deleted file mode 100644
index d55802d..0000000
--- a/arch/arm/mach-realview/include/mach/scu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASMARM_ARCH_SCU_H
-#define __ASMARM_ARCH_SCU_H
-
-/*
- * SCU registers
- */
-#define SCU_CTRL 0x00
-#define SCU_CONFIG 0x04
-#define SCU_CPU_STATUS 0x08
-#define SCU_INVALIDATE 0x0c
-#define SCU_FPGA_REVISION 0x10
-
-#endif
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 1c01d13..60b4e11 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -9,196 +9,18 @@
* published by the Free Software Foundation.
*/
#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
#include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
#include <linux/clockchips.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/hardware/arm_twd.h>
-#include <asm/hardware/gic.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * Used on SMP for either the local timer or IPI_TIMER
- */
-void local_timer_interrupt(void)
-{
- struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
-
- clk->event_handler(clk);
-}
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/* set up by the platform code */
-void __iomem *twd_base;
-
-static unsigned long mpcore_timer_rate;
-
-static void local_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
- unsigned long ctrl;
-
- switch(mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- /* timer load already set up */
- ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
- | TWD_TIMER_CONTROL_PERIODIC;
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* period set, and timer enabled in 'next_event' hook */
- ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- default:
- ctrl = 0;
- }
-
- __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
-}
-
-static int local_timer_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
-
- __raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
- __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL);
-
- return 0;
-}
-
-/*
- * local_timer_ack: checks for a local timer interrupt.
- *
- * If a local timer interrupt has occurred, acknowledge and return 1.
- * Otherwise, return 0.
- */
-int local_timer_ack(void)
-{
- if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
- __raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
- return 1;
- }
-
- return 0;
-}
-
-static void __cpuinit twd_calibrate_rate(void)
-{
- unsigned long load, count;
- u64 waitjiffies;
-
- /*
- * If this is the first time round, we need to work out how fast
- * the timer ticks
- */
- if (mpcore_timer_rate == 0) {
- printk("Calibrating local timer... ");
-
- /* Wait for a tick to start */
- waitjiffies = get_jiffies_64() + 1;
-
- while (get_jiffies_64() < waitjiffies)
- udelay(10);
-
- /* OK, now the tick has started, let's get the timer going */
- waitjiffies += 5;
-
- /* enable, no interrupt or reload */
- __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
-
- /* maximum value */
- __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
-
- while (get_jiffies_64() < waitjiffies)
- udelay(10);
-
- count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
-
- mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
-
- printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
- (mpcore_timer_rate / 100000) % 100);
- }
-
- load = mpcore_timer_rate / HZ;
-
- __raw_writel(load, twd_base + TWD_TIMER_LOAD);
-}
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
/*
* Setup the local clock events for a CPU.
*/
-void __cpuinit local_timer_setup(void)
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
- unsigned long flags;
-
- twd_calibrate_rate();
-
- clk->name = "local_timer";
- clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- clk->rating = 350;
- clk->set_mode = local_timer_set_mode;
- clk->set_next_event = local_timer_set_next_event;
- clk->irq = IRQ_LOCALTIMER;
- clk->cpumask = cpumask_of(cpu);
- clk->shift = 20;
- clk->mult = div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift);
- clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
- clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
-
- /* Make sure our local interrupt controller has this enabled */
- local_irq_save(flags);
- get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER);
- local_irq_restore(flags);
-
- clockevents_register_device(clk);
+ evt->irq = IRQ_LOCALTIMER;
+ twd_timer_setup(evt);
}
-
-/*
- * take a local timer down
- */
-void __cpuexit local_timer_stop(void)
-{
- __raw_writel(0, twd_base + TWD_TIMER_CONTROL);
-}
-
-#else /* CONFIG_LOCAL_TIMERS */
-
-static void dummy_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
-}
-
-void __cpuinit local_timer_setup(void)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-
- clk->name = "dummy_timer";
- clk->features = CLOCK_EVT_FEAT_ONESHOT |
- CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_DUMMY;
- clk->rating = 400;
- clk->mult = 1;
- clk->set_mode = dummy_timer_set_mode;
- clk->broadcast = smp_timer_broadcast;
- clk->cpumask = cpumask_of(cpu);
-
- clockevents_register_device(clk);
-}
-
-#endif /* !CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 30a9c68..ca74217 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -19,10 +19,11 @@
#include <asm/cacheflush.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
+#include <asm/localtimer.h>
#include <mach/board-eb.h>
#include <mach/board-pb11mp.h>
-#include <mach/scu.h>
+#include <asm/smp_scu.h>
#include "core.h"
@@ -44,31 +45,12 @@
return (void __iomem *)0;
}
-static unsigned int __init get_core_count(void)
+static inline unsigned int get_core_count(void)
{
- unsigned int ncores;
void __iomem *scu_base = scu_base_addr();
-
- if (scu_base) {
- ncores = __raw_readl(scu_base + SCU_CONFIG);
- ncores = (ncores & 0x03) + 1;
- } else
- ncores = 1;
-
- return ncores;
-}
-
-/*
- * Setup the SCU
- */
-static void scu_enable(void)
-{
- u32 scu_ctrl;
- void __iomem *scu_base = scu_base_addr();
-
- scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
- scu_ctrl |= 1;
- __raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+ if (scu_base)
+ return scu_get_core_count(scu_base);
+ return 1;
}
static DEFINE_SPINLOCK(boot_lock);
@@ -184,7 +166,7 @@
unsigned int i, ncores = get_core_count();
for (i = 0; i < ncores; i++)
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
}
void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -217,19 +199,12 @@
if (max_cpus > ncores)
max_cpus = ncores;
-#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
- /*
- * Enable the local timer or broadcast device for the boot CPU.
- */
- local_timer_setup();
-#endif
-
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
*/
for (i = 0; i < max_cpus; i++)
- cpu_set(i, cpu_present_map);
+ set_cpu_present(i, true);
/*
* Initialise the SCU if there are more than one CPU and let
@@ -239,7 +214,13 @@
* WFI
*/
if (max_cpus > 1) {
- scu_enable();
+ /*
+ * Enable the local timer or broadcast device for the
+ * boot CPU, but only if we have more than one CPU.
+ */
+ percpu_timer_setup();
+
+ scu_enable(scu_base_addr());
poke_milo();
}
}
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c20fbef..8dfa44e 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -32,6 +32,7 @@
#include <asm/hardware/gic.h>
#include <asm/hardware/icst307.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index ea1e60e..dc4b169 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -32,6 +32,7 @@
#include <asm/hardware/gic.h>
#include <asm/hardware/icst307.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 2097956..b9bd481 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -642,7 +642,6 @@
config CPU_HIGH_VECTOR
depends on !MMU && CPU_CP15 && !CPU_ARM740T
bool "Select the High exception vector"
- default n
help
Say Y here to select high exception vector(0xFFFF0000~).
The exception vector can be vary depending on the platform
@@ -726,7 +725,6 @@
config OUTER_CACHE
bool
- default n
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
@@ -739,7 +737,6 @@
config CACHE_FEROCEON_L2_WRITETHROUGH
bool "Force Feroceon L2 cache write through"
depends on CACHE_FEROCEON_L2
- default n
help
Say Y here to use the Feroceon L2 cache in writethrough mode.
Unless you specifically require this, say N for writeback mode.
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 9f88dd3..0ab75c6 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -110,6 +110,12 @@
return err;
}
+int ioremap_page(unsigned long virt, unsigned long phys,
+ const struct mem_type *mtype)
+{
+ return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+}
+EXPORT_SYMBOL(ioremap_page);
void __check_kvm_seq(struct mm_struct *mm)
{
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e6344ec..70974d7 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -255,6 +255,7 @@
{
return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
}
+EXPORT_SYMBOL(get_mem_type);
/*
* Adjust the PMD section entries according to the CPU in use.
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 17d0e99..8986b741 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -48,7 +48,14 @@
config MXC_PWM
tristate "Enable PWM driver"
depends on ARCH_MXC
+ select HAVE_PWM
help
Enable support for the i.MX PWM controller(s).
+config ARCH_HAS_RNGA
+ bool
+ depends on ARCH_MXC
+
+config ARCH_MXC_IOMUX_V3
+ bool
endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 0554063..e3212c8 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -7,4 +7,5 @@
obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 89e9579..7506d96 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -64,6 +64,8 @@
_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
}
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
+
static int gpio_set_irq_type(u32 irq, u32 type)
{
u32 gpio = irq_to_gpio(irq);
@@ -72,6 +74,7 @@
int edge;
void __iomem *reg = port->base;
+ port->both_edges &= ~(1 << (gpio & 31));
switch (type) {
case IRQ_TYPE_EDGE_RISING:
edge = GPIO_INT_RISE_EDGE;
@@ -79,13 +82,24 @@
case IRQ_TYPE_EDGE_FALLING:
edge = GPIO_INT_FALL_EDGE;
break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val = mxc_gpio_get(&port->chip, gpio & 31);
+ if (val) {
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+ } else {
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+ }
+ port->both_edges |= 1 << (gpio & 31);
+ break;
case IRQ_TYPE_LEVEL_LOW:
edge = GPIO_INT_LOW_LEV;
break;
case IRQ_TYPE_LEVEL_HIGH:
edge = GPIO_INT_HIGH_LEV;
break;
- default: /* this includes IRQ_TYPE_EDGE_BOTH */
+ default:
return -EINVAL;
}
@@ -98,6 +112,34 @@
return 0;
}
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+ void __iomem *reg = port->base;
+ u32 bit, val;
+ int edge;
+
+ reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+ bit = gpio & 0xf;
+ val = __raw_readl(reg);
+ edge = (val >> (bit << 1)) & 3;
+ val &= ~(0x3 << (bit << 1));
+ switch (edge) {
+ case GPIO_INT_HIGH_LEV:
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+ break;
+ case GPIO_INT_LOW_LEV:
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+ break;
+ default:
+ pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+ gpio, edge);
+ return;
+ }
+ __raw_writel(val | (edge << (bit << 1)), reg);
+}
+
/* handle n interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
@@ -105,11 +147,16 @@
gpio_irq_no = port->virtual_irq_start;
for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+ u32 gpio = irq_to_gpio(gpio_irq_no);
if ((irq_stat & 1) == 0)
continue;
BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+
+ if (port->both_edges & (1 << (gpio & 31)))
+ mxc_flip_edge(port, gpio);
+
irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
&irq_desc[gpio_irq_no]);
}
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
new file mode 100644
index 0000000..8769e91
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
+ * All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+
+#include <mach/hardware.h>
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
new file mode 100644
index 0000000..06701df
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+
+/*
+ * MXC UART EVB board level configurations
+ */
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR 0xF5000000
+#define MX21ADS_MMIO_SIZE SZ_16M
+
+#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
+ (MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP 0x0001 /* read */
+#define MX21ADS_IO_TP6 0x0001 /* write */
+#define MX21ADS_IO_SW_SEL 0x0002 /* read */
+#define MX21ADS_IO_TP7 0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE 0x0008
+#define MX21ADS_IO_CSI_CTL2 0x0010
+#define MX21ADS_IO_CSI_CTL1 0x0020
+#define MX21ADS_IO_CSI_CTL0 0x0040
+#define MX21ADS_IO_UART1_EN 0x0080
+#define MX21ADS_IO_UART4_EN 0x0100
+#define MX21ADS_IO_LCDON 0x0200
+#define MX21ADS_IO_IRDA_EN 0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B 0x1000
+#define MX21ADS_IO_IRDA_MD1 0x2000
+#define MX21ADS_IO_LED4_ON 0x4000
+#define MX21ADS_IO_LED3_ON 0x8000
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
new file mode 100644
index 0000000..a870f8e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
new file mode 100644
index 0000000..552b55d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 318c72a..06e6895 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,7 +114,7 @@
#define MXC_MAX_EXP_IO_LINES 16
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
new file mode 100644
index 0000000..78cf31e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31lilly_boards {
+ MX31LILLY_NOBOARD = 0,
+ MX31LILLY_DB = 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31lilly_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index e4e5cf5..52fbdf2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,28 +11,8 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define MXC_MAX_EXP_IO_LINES 16
-
-
-/*
- * Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE SZ_128M
-/*
- * Size of MBX buffer memory
- */
-#define MXC_MBX_MEM_SIZE SZ_16M
-/*
- * Size of memory available to kernel
- */
-#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
-
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index f8aef1b..303fd24 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,7 +19,7 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 2b6b316..519bab3 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,9 +11,54 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG (CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES 16
+
#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
similarity index 67%
copy from arch/arm/mach-imx/include/mach/vmalloc.h
copy to arch/arm/plat-mxc/include/mach/board-mx35pdk.h
index 7d7cb0b..1111037 100644
--- a/arch/arm/mach-imx/include/mach/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -1,7 +1,5 @@
/*
- * arch/arm/mach-imx/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -17,4 +15,13 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index 82232ba..f0a1fa1 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,7 +19,7 @@
#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 750c62a..4fcd749 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,7 +19,7 @@
#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
similarity index 69%
rename from arch/arm/mach-imx/include/mach/vmalloc.h
rename to arch/arm/plat-mxc/include/mach/board-pcm043.h
index 7d7cb0b..15fbdf1 100644
--- a/arch/arm/mach-imx/include/mach/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -1,7 +1,5 @@
/*
- * arch/arm/mach-imx/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -17,4 +15,13 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
+#define __ASM_ARCH_MXC_BOARD_PCM043_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 4ff762d..04033ec 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,7 +11,7 @@
#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
#define __ASM_ARCH_MXC_BOARD_QONG_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index b2f9b72..02c3cd0 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -14,7 +14,11 @@
struct platform_device;
struct clk;
-extern void mxc_map_io(void);
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
extern void mxc_init_irq(void);
extern void mxc_timer_init(struct clk *timer_clk);
extern int mx1_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f77314..bbc5f67 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -25,6 +25,9 @@
#ifdef CONFIG_MACH_MX27ADS
#include <mach/board-mx27ads.h>
#endif
+#ifdef CONFIG_MACH_MX21ADS
+#include <mach/board-mx21ads.h>
+#endif
#ifdef CONFIG_MACH_PCM038
#include <mach/board-pcm038.h>
#endif
@@ -34,6 +37,21 @@
#ifdef CONFIG_MACH_QONG
#include <mach/board-qong.h>
#endif
+#ifdef CONFIG_MACH_PCM043
+#include <mach/board-pcm043.h>
+#endif
+#ifdef CONFIG_MACH_MX27_3DS
+#include <mach/board-mx27pdk.h>
+#endif
+#ifdef CONFIG_MACH_ARMADILLO5X0
+#include <mach/board-armadillo5x0.h>
+#endif
+#ifdef CONFIG_MACH_MX35_3DS
+#include <mach/board-mx35pdk.h>
+#endif
+#ifdef CONFIG_MACH_MX27LITE
+#include <mach/board-mx27lite.h>
+#endif
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index ea509f1..894d2f8 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -35,6 +35,7 @@
int irq;
int virtual_irq_start;
struct gpio_chip chip;
+ u32 both_edges;
};
int mxc_gpio_init(struct mxc_gpio_port*, int);
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 599217b..90af4d9 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -23,7 +23,7 @@
struct imxuart_platform_data {
int (*init)(struct platform_device *pdev);
- int (*exit)(struct platform_device *pdev);
+ void (*exit)(struct platform_device *pdev);
unsigned int flags;
};
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 762a7b0..9f01011 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -76,8 +76,8 @@
u_char * fixed_screen_cpu;
dma_addr_t fixed_screen_dma;
- int (*init)(struct platform_device*);
- int (*exit)(struct platform_device*);
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
void (*lcd_power)(int);
void (*backlight_power)(int);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 57e927a..27f8d1b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -114,7 +114,7 @@
* - setups the iomux according to the configuration
* - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
*/
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
/*
* setups mutliple pins
* convenient way to call the above function with tables
@@ -633,6 +633,40 @@
#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
new file mode 100644
index 0000000..00b0ac1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -0,0 +1,1267 @@
+/*
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option, NO_PAD_CTRL) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_MX35_H__
+#define __MACH_IOMUX_MX35_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/* PAD MUX ALT INPSE PATH */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
+#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
+#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6e8, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6e8, 0x288, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6e8, 0x288, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+
+#endif /* __MACH_IOMUX_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
new file mode 100644
index 0000000..7cd8454
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ * build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ * things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ * (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ * (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num>
+ *
+ */
+
+struct pad_desc {
+ unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
+ unsigned mux_mode:8;
+ unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
+#define NO_PAD_CTRL (1 << 16)
+ unsigned pad_ctrl:17;
+ unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
+ unsigned select_input:3;
+};
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
+ _select_input, _pad_ctrl) \
+ { \
+ .mux_ctrl_ofs = _mux_ctrl_ofs, \
+ .mux_mode = _mux_mode, \
+ .pad_ctrl_ofs = _pad_ctrl_ofs, \
+ .pad_ctrl = _pad_ctrl, \
+ .select_input_ofs = _select_input_ofs, \
+ .select_input = _select_input, \
+ }
+
+/*
+ * Use to set PAD control
+ */
+#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0
+#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1
+
+#define PAD_CTL_NO_HYSTERESIS 0
+#define PAD_CTL_HYSTERESIS 1
+
+#define PAD_CTL_PULL_DISABLED 0x0
+#define PAD_CTL_PULL_KEEPER 0xa
+#define PAD_CTL_PULL_DOWN_100K 0xc
+#define PAD_CTL_PULL_UP_47K 0xd
+#define PAD_CTL_PULL_UP_100K 0xe
+#define PAD_CTL_PULL_UP_22K 0xf
+
+#define PAD_CTL_OUTPUT_CMOS 0
+#define PAD_CTL_OUTPUT_OPEN_DRAIN 1
+
+#define PAD_CTL_DRIVE_STRENGTH_NORM 0
+#define PAD_CTL_DRIVE_STRENGTH_HIGH 1
+#define PAD_CTL_DRIVE_STRENGTH_MAX 2
+
+#define PAD_CTL_SLEW_RATE_SLOW 0
+#define PAD_CTL_SLEW_RATE_FAST 1
+
+/*
+ * setups a single pad:
+ * - reserves the pad so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+
+/*
+ * setups mutliple pads
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+
+/*
+ * releases a single pad:
+ * - make it available for a future use by another driver
+ * - DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_v3_release_pad(struct pad_desc *pad);
+
+/*
+ * releases multiple pads
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+
+#endif /* __MACH_IOMUX_V3_H__*/
+
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index eca37d09f..6065e00 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -32,4 +32,12 @@
#define CONSISTENT_DMA_SIZE SZ_4M
#endif /* CONFIG_MX1_VIDEO */
+#if defined(CONFIG_MX3_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_8M
+#endif /* CONFIG_MX3_VIDEO */
+
#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index b92e023..1000bf3 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,7 +179,7 @@
#define DMA_REQ_UART1_T 30
#define DMA_REQ_UART1_R 31
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 3878c60..b559a4b 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -48,6 +48,9 @@
#define CS4_SIZE SZ_32M
#define CS5_BASE_ADDR 0xB6000000
+#define CS5_BASE_ADDR_VIRT 0xF6000000
+#define CS5_SIZE SZ_32M
+
#define PCMCIA_MEM_BASE_ADDR 0xBC000000
/*
@@ -191,6 +194,9 @@
#define CS4_IO_ADDRESS(x) \
(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+#define CS5_IO_ADDRESS(x) \
+ (((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
+
#define X_MEMC_IO_ADDRESS(x) \
(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
deleted file mode 100644
index 6c19a13..0000000
--- a/arch/arm/plat-mxc/include/mach/mxc_timer.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_MX1
-#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT TIM1_INT
-
-#define TCTL_VAL TCTL_CLK_PCLK1
-#define TCTL_IRQEN (1<<4)
-#define TCTL_FRR (1<<8)
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_4 (2<<1)
-#define TCTL_CLK_TIN (3<<1)
-#define TCTL_CLK_32 (4<<1)
-
-#define MXC_TCTL 0x00
-#define MXC_TPRER 0x04
-#define MXC_TCMP 0x08
-#define MXC_TCR 0x0c
-#define MXC_TCN 0x10
-#define MXC_TSTAT 0x14
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
- __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
- TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
- __raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX1 */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT MXC_INT_GPT1
-
-#define MXC_TCTL 0x00
-#define TCTL_VAL TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_4 (2<<1)
-#define TCTL_IRQEN (1<<4)
-#define TCTL_FRR (1<<8)
-#define MXC_TPRER 0x04
-#define MXC_TCMP 0x08
-#define MXC_TCR 0x0c
-#define MXC_TCN 0x10
-#define MXC_TSTAT 0x14
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
- __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
- TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
- __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT MXC_INT_GPT
-
-#define MXC_TCTL 0x00
-#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG (1<<6)
-#define TCTL_FRR (1<<9)
-#define TCTL_WAITEN (1<<3)
-
-#define MXC_TPRER 0x04
-#define MXC_TSTAT 0x08
-#define TSTAT_OF1 (1<<0)
-#define TSTAT_OF2 (1<<1)
-#define TSTAT_OF3 (1<<2)
-#define TSTAT_IF1 (1<<3)
-#define TSTAT_IF2 (1<<4)
-#define TSTAT_ROV (1<<5)
-#define MXC_IR 0x0c
-#define MXC_TCMP 0x10
-#define MXC_TCMP2 0x14
-#define MXC_TCMP3 0x18
-#define MXC_TCR 0x1c
-#define MXC_TCN 0x24
-
-static inline void gpt_irq_disable(void)
-{
- __raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
- __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR (1<<15)
-#define TCTL_CC (1<<10)
-#define TCTL_OM (1<<9)
-#define TCTL_CAP_RIS (1<<6)
-#define TCTL_CAP_FAL (2<<6)
-#define TCTL_CAP_RIS_FAL (3<<6)
-#define TCTL_CAP_ENA (1<<5)
-#define TCTL_TEN (1<<0)
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h
index 2dacb308..be27337 100644
--- a/arch/arm/plat-mxc/include/mach/usb.h
+++ b/arch/arm/plat-mxc/include/mach/usb.h
@@ -17,7 +17,7 @@
struct imxusb_platform_data {
int (*init)(struct device *);
- int (*exit)(struct device *);
+ void (*exit)(struct device *);
};
#endif /* __ASM_ARCH_MXC_USB */
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
new file mode 100644
index 0000000..77a078f
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v3.h>
+
+#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
+
+static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
+
+/*
+ * setups a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+{
+ unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+ if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
+ return -EBUSY;
+ if (pad->mux_ctrl_ofs)
+ __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+
+ if (pad->select_input_ofs)
+ __raw_writel(pad->select_input,
+ IOMUX_BASE + pad->select_input_ofs);
+
+ if (!(pad->pad_ctrl & NO_PAD_CTRL))
+ __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+ return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
+
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+{
+ struct pad_desc *p = pad_list;
+ int i;
+ int ret;
+
+ for (i = 0; i < count; i++) {
+ ret = mxc_iomux_v3_setup_pad(p);
+ if (ret)
+ goto setup_error;
+ p++;
+ }
+ return 0;
+
+setup_error:
+ mxc_iomux_v3_release_multiple_pads(pad_list, i);
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
+
+void mxc_iomux_v3_release_pad(struct pad_desc *pad)
+{
+ unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+ clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
+
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
+{
+ struct pad_desc *p = pad_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mxc_iomux_v3_release_pad(p);
+ p++;
+ }
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 0fb68a5..8aee763 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -24,31 +24,27 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */
-#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */
-#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */
-#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */
-#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */
-#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */
-#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */
-#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */
-#define AVIC_NIPRIORITY(x) (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
-#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */
-#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */
-#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */
-#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */
-#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */
-#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */
-#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */
-#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */
-#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */
-#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */
+#define AVIC_INTCNTL 0x00 /* int control reg */
+#define AVIC_NIMASK 0x04 /* int mask reg */
+#define AVIC_INTENNUM 0x08 /* int enable number reg */
+#define AVIC_INTDISNUM 0x0C /* int disable number reg */
+#define AVIC_INTENABLEH 0x10 /* int enable reg high */
+#define AVIC_INTENABLEL 0x14 /* int enable reg low */
+#define AVIC_INTTYPEH 0x18 /* int type reg high */
+#define AVIC_INTTYPEL 0x1C /* int type reg low */
+#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR 0x40 /* norm int vector/status */
+#define AVIC_FIVECSR 0x44 /* fast int vector/status */
+#define AVIC_INTSRCH 0x48 /* int source reg high */
+#define AVIC_INTSRCL 0x4C /* int source reg low */
+#define AVIC_INTFRCH 0x50 /* int force reg high */
+#define AVIC_INTFRCL 0x54 /* int force reg low */
+#define AVIC_NIPNDH 0x58 /* norm int pending high */
+#define AVIC_NIPNDL 0x5C /* norm int pending low */
+#define AVIC_FIPNDH 0x60 /* fast int pending high */
+#define AVIC_FIPNDL 0x64 /* fast int pending low */
-#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH 3
-#define IIM_PROD_REV_LEN 5
+static void __iomem *avic_base;
int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
@@ -59,11 +55,11 @@
if (irq >= MXC_INTERNAL_IRQS)
return -EINVAL;;
- temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+ temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
temp &= ~mask;
temp |= prio & mask;
- __raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+ __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
return 0;
#else
@@ -81,12 +77,12 @@
return -EINVAL;
if (irq < MXC_INTERNAL_IRQS / 2) {
- irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+ irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
} else {
irq -= MXC_INTERNAL_IRQS / 2;
- irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+ irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
}
return 0;
@@ -97,13 +93,13 @@
/* Disable interrupt number "irq" in the AVIC */
static void mxc_mask_irq(unsigned int irq)
{
- __raw_writel(irq, AVIC_INTDISNUM);
+ __raw_writel(irq, avic_base + AVIC_INTDISNUM);
}
/* Enable interrupt number "irq" in the AVIC */
static void mxc_unmask_irq(unsigned int irq)
{
- __raw_writel(irq, AVIC_INTENNUM);
+ __raw_writel(irq, avic_base + AVIC_INTENNUM);
}
static struct irq_chip mxc_avic_chip = {
@@ -121,19 +117,21 @@
{
int i;
+ avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+
/* put the AVIC into the reset value with
* all interrupts disabled
*/
- __raw_writel(0, AVIC_INTCNTL);
- __raw_writel(0x1f, AVIC_NIMASK);
+ __raw_writel(0, avic_base + AVIC_INTCNTL);
+ __raw_writel(0x1f, avic_base + AVIC_NIMASK);
/* disable all interrupts */
- __raw_writel(0, AVIC_INTENABLEH);
- __raw_writel(0, AVIC_INTENABLEL);
+ __raw_writel(0, avic_base + AVIC_INTENABLEH);
+ __raw_writel(0, avic_base + AVIC_INTENABLEL);
/* all IRQ no FIQ */
- __raw_writel(0, AVIC_INTTYPEH);
- __raw_writel(0, AVIC_INTTYPEL);
+ __raw_writel(0, avic_base + AVIC_INTTYPEH);
+ __raw_writel(0, avic_base + AVIC_INTTYPEL);
for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
set_irq_chip(i, &mxc_avic_chip);
set_irq_handler(i, handle_level_irq);
@@ -142,7 +140,7 @@
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
- __raw_writel(0, AVIC_NIPRIORITY(i));
+ __raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
/* init architectures chained interrupt handler */
mxc_register_gpios();
@@ -154,3 +152,4 @@
printk(KERN_INFO "MXC IRQ initialized\n");
}
+
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 9bffbc5..ae34198 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -15,65 +15,26 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/pwm.h>
+#include <mach/hardware.h>
-#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
-#define PWM_VER_1
-#define PWMCR 0x00 /* PWM Control Register */
-#define PWMSR 0x04 /* PWM Sample Register */
-#define PWMPR 0x08 /* PWM Period Register */
-#define PWMCNR 0x0C /* PWM Counter Register */
+/* i.MX1 and i.MX21 share the same PWM function block: */
-#define PWMCR_HCTR (1 << 18) /* Halfword FIFO Data Swapping */
-#define PWMCR_BCTR (1 << 17) /* Byte FIFO Data Swapping */
-#define PWMCR_SWR (1 << 16) /* Software Reset */
-#define PWMCR_CLKSRC_PERCLK (0 << 15) /* PERCLK Clock Source */
-#define PWMCR_CLKSRC_CLK32 (1 << 15) /* 32KHz Clock Source */
-#define PWMCR_PRESCALER(x) (((x - 1) & 0x7F) << 8) /* PRESCALER */
-#define PWMCR_IRQ (1 << 7) /* Interrupt Request */
-#define PWMCR_IRQEN (1 << 6) /* Interrupt Request Enable */
-#define PWMCR_FIFOAV (1 << 5) /* FIFO Available */
-#define PWMCR_EN (1 << 4) /* Enables/Disables the PWM */
-#define PWMCR_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
-#define PWMCR_DIV(x) (((x) & 0x03) << 0) /* Clock divider 2/4/8/16 */
+#define MX1_PWMC 0x00 /* PWM Control Register */
+#define MX1_PWMS 0x04 /* PWM Sample Register */
+#define MX1_PWMP 0x08 /* PWM Period Register */
-#define MAX_DIV (128 * 16)
-#endif
-#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
-#define PWM_VER_2
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
-#define PWMCR 0x00 /* PWM Control Register */
-#define PWMSR 0x04 /* PWM Status Register */
-#define PWMIR 0x08 /* PWM Interrupt Register */
-#define PWMSAR 0x0C /* PWM Sample Register */
-#define PWMPR 0x10 /* PWM Period Register */
-#define PWMCNR 0x14 /* PWM Counter Register */
+#define MX3_PWMCR 0x00 /* PWM Control Register */
+#define MX3_PWMSAR 0x0C /* PWM Sample Register */
+#define MX3_PWMPR 0x10 /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_EN (1 << 0)
-#define PWMCR_EN (1 << 0) /* Enables/Disables the PWM */
-#define PWMCR_REPEAT(x) (((x) & 0x03) << 1) /* Sample Repeats */
-#define PWMCR_SWR (1 << 3) /* Software Reset */
-#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)/* PRESCALER */
-#define PWMCR_CLKSRC(x) (((x) & 0x3) << 16)
-#define PWMCR_CLKSRC_OFF (0 << 16)
-#define PWMCR_CLKSRC_IPG (1 << 16)
-#define PWMCR_CLKSRC_IPG_HIGH (2 << 16)
-#define PWMCR_CLKSRC_CLK32 (3 << 16)
-#define PWMCR_POUTC
-#define PWMCR_HCTR (1 << 20) /* Halfword FIFO Data Swapping */
-#define PWMCR_BCTR (1 << 21) /* Byte FIFO Data Swapping */
-#define PWMCR_DBGEN (1 << 22) /* Debug Mode */
-#define PWMCR_WAITEN (1 << 23) /* Wait Mode */
-#define PWMCR_DOZEN (1 << 24) /* Doze Mode */
-#define PWMCR_STOPEN (1 << 25) /* Stop Mode */
-#define PWMCR_FWM(x) (((x) & 0x3) << 26) /* FIFO Water Mark */
-#define MAX_DIV 4096
-#endif
-
-#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
-#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
-#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
struct pwm_device {
struct list_head node;
@@ -91,32 +52,52 @@
int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
{
- unsigned long long c;
- unsigned long period_cycles, duty_cycles, prescale;
-
if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
return -EINVAL;
- c = clk_get_rate(pwm->clk);
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
+ if (cpu_is_mx27() || cpu_is_mx3()) {
+ unsigned long long c;
+ unsigned long period_cycles, duty_cycles, prescale;
+ c = clk_get_rate(pwm->clk);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
- prescale = period_cycles / 0x10000 + 1;
+ prescale = period_cycles / 0x10000 + 1;
- period_cycles /= prescale;
- c = (unsigned long long)period_cycles * duty_ns;
- do_div(c, period_ns);
- duty_cycles = c;
+ period_cycles /= prescale;
+ c = (unsigned long long)period_cycles * duty_ns;
+ do_div(c, period_ns);
+ duty_cycles = c;
-#ifdef PWM_VER_2
- writel(duty_cycles, pwm->mmio_base + PWMSAR);
- writel(period_cycles, pwm->mmio_base + PWMPR);
- writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
- pwm->mmio_base + PWMCR);
-#elif defined PWM_VER_1
-#error PWM not yet working on MX1 / MX21
-#endif
+ writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
+ writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
+ writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+ MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
+ pwm->mmio_base + MX3_PWMCR);
+ } else if (cpu_is_mx1() || cpu_is_mx21()) {
+ /* The PWM subsystem allows for exact frequencies. However,
+ * I cannot connect a scope on my device to the PWM line and
+ * thus cannot provide the program the PWM controller
+ * exactly. Instead, I'm relying on the fact that the
+ * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+ * function group already. So I'll just modify the PWM sample
+ * register to follow the ratio of duty_ns vs. period_ns
+ * accordingly.
+ *
+ * This is good enought for programming the brightness of
+ * the LCD backlight.
+ *
+ * The real implementation would divide PERCLK[0] first by
+ * both the prescaler (/1 .. /128) and then by CLKSEL
+ * (/2 .. /16).
+ */
+ u32 max = readl(pwm->mmio_base + MX1_PWMP);
+ u32 p = max * duty_ns / period_ns;
+ writel(max - p, pwm->mmio_base + MX1_PWMS);
+ } else {
+ BUG();
+ }
return 0;
}
@@ -297,4 +278,3 @@
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index dab3357..88fb3a5 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -29,22 +29,85 @@
#include <mach/hardware.h>
#include <asm/mach/time.h>
#include <mach/common.h>
-#include <mach/mxc_timer.h>
+
+/* defines common for all i.MX */
+#define MXC_TCTL 0x00
+#define MXC_TCTL_TEN (1 << 0)
+#define MXC_TPRER 0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1 (1 << 1)
+#define MX1_2_TCTL_IRQEN (1 << 4)
+#define MX1_2_TCTL_FRR (1 << 8)
+#define MX1_2_TCMP 0x08
+#define MX1_2_TCN 0x10
+#define MX1_2_TSTAT 0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT (1 << 1)
+#define MX2_TSTAT_COMP (1 << 0)
+
+/* MX31, MX35 */
+#define MX3_TCTL_WAITEN (1 << 3)
+#define MX3_TCTL_CLK_IPG (1 << 6)
+#define MX3_TCTL_FRR (1 << 9)
+#define MX3_IR 0x0c
+#define MX3_TSTAT 0x08
+#define MX3_TSTAT_OF1 (1 << 0)
+#define MX3_TCN 0x24
+#define MX3_TCMP 0x10
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-/* clock source */
+static void __iomem *timer_base;
-static cycle_t mxc_get_cycles(struct clocksource *cs)
+static inline void gpt_irq_disable(void)
{
- return __raw_readl(TIMER_BASE + MXC_TCN);
+ unsigned int tmp;
+
+ if (cpu_is_mx3())
+ __raw_writel(0, timer_base + MX3_IR);
+ else {
+ tmp = __raw_readl(timer_base + MXC_TCTL);
+ __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
+ }
+}
+
+static inline void gpt_irq_enable(void)
+{
+ if (cpu_is_mx3())
+ __raw_writel(1<<0, timer_base + MX3_IR);
+ else {
+ __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+ timer_base + MXC_TCTL);
+ }
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ if (cpu_is_mx1())
+ __raw_writel(0, timer_base + MX1_2_TSTAT);
+ if (cpu_is_mx2())
+ __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
+ if (cpu_is_mx3())
+ __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+}
+
+static cycle_t mx1_2_get_cycles(struct clocksource *cs)
+{
+ return __raw_readl(timer_base + MX1_2_TCN);
+}
+
+static cycle_t mx3_get_cycles(struct clocksource *cs)
+{
+ return __raw_readl(timer_base + MX3_TCN);
}
static struct clocksource clocksource_mxc = {
.name = "mxc_timer1",
.rating = 200,
- .read = mxc_get_cycles,
+ .read = mx1_2_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
@@ -54,6 +117,9 @@
{
unsigned int c = clk_get_rate(timer_clk);
+ if (cpu_is_mx3())
+ clocksource_mxc.read = mx3_get_cycles;
+
clocksource_mxc.mult = clocksource_hz2mult(c,
clocksource_mxc.shift);
clocksource_register(&clocksource_mxc);
@@ -63,15 +129,29 @@
/* clock event */
-static int mxc_set_next_event(unsigned long evt,
+static int mx1_2_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long tcmp;
- tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
- __raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+ tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
- return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+ __raw_writel(tcmp, timer_base + MX1_2_TCMP);
+
+ return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+static int mx3_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long tcmp;
+
+ tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+
+ __raw_writel(tcmp, timer_base + MX3_TCMP);
+
+ return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
-ETIME : 0;
}
@@ -100,8 +180,13 @@
if (mode != clockevent_mode) {
/* Set event time into far-far future */
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
- TIMER_BASE + MXC_TCMP);
+ if (cpu_is_mx3())
+ __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
+ timer_base + MX3_TCMP);
+ else
+ __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
+ timer_base + MX1_2_TCMP);
+
/* Clear pending interrupt */
gpt_irq_acknowledge();
}
@@ -148,7 +233,10 @@
struct clock_event_device *evt = &clockevent_mxc;
uint32_t tstat;
- tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+ if (cpu_is_mx3())
+ tstat = __raw_readl(timer_base + MX3_TSTAT);
+ else
+ tstat = __raw_readl(timer_base + MX1_2_TSTAT);
gpt_irq_acknowledge();
@@ -168,7 +256,7 @@
.features = CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_mode = mxc_set_mode,
- .set_next_event = mxc_set_next_event,
+ .set_next_event = mx1_2_set_next_event,
.rating = 200,
};
@@ -176,6 +264,9 @@
{
unsigned int c = clk_get_rate(timer_clk);
+ if (cpu_is_mx3())
+ clockevent_mxc.set_next_event = mx3_set_next_event;
+
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_mxc.shift);
clockevent_mxc.max_delta_ns =
@@ -192,23 +283,47 @@
void __init mxc_timer_init(struct clk *timer_clk)
{
+ uint32_t tctl_val;
+ int irq;
+
clk_enable(timer_clk);
+ if (cpu_is_mx1()) {
+#ifdef CONFIG_ARCH_MX1
+ timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
+ irq = TIM1_INT;
+#endif
+ } else if (cpu_is_mx2()) {
+#ifdef CONFIG_ARCH_MX2
+ timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+ irq = MXC_INT_GPT1;
+#endif
+ } else if (cpu_is_mx3()) {
+#ifdef CONFIG_ARCH_MX3
+ timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+ irq = MXC_INT_GPT;
+#endif
+ } else
+ BUG();
+
/*
* Initialise to a known state (all timers off, and timing reset)
*/
- __raw_writel(0, TIMER_BASE + MXC_TCTL);
- __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
- __raw_writel(TCTL_FRR | /* free running */
- TCTL_VAL | /* set clocksource and arch specific bits */
- TCTL_TEN, /* start the timer */
- TIMER_BASE + MXC_TCTL);
+ __raw_writel(0, timer_base + MXC_TCTL);
+ __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+
+ if (cpu_is_mx3())
+ tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+ else
+ tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+
+ __raw_writel(tctl_val, timer_base + MXC_TCTL);
/* init and register the timer to the framework */
mxc_clocksource_init(timer_clk);
mxc_clockevent_init(timer_clk);
/* Make irqs happen */
- setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+ setup_irq(irq, &mxc_timer_irq);
}
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 9dd68fa..efe85d0 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -23,6 +23,11 @@
select CPU_V7
select COMMON_CLKDEV
+config ARCH_OMAP4
+ bool "TI OMAP4"
+ select CPU_V7
+ select ARM_GIC
+
endchoice
comment "OMAP Feature Selections"
@@ -40,7 +45,6 @@
config OMAP_DEBUG_POWERDOMAIN
bool "Emit debug messages from powerdomain layer"
depends on ARCH_OMAP2 || ARCH_OMAP3
- default n
help
Say Y here if you want to compile in powerdomain layer
debugging messages for OMAP2/3. These messages can
@@ -52,7 +56,6 @@
config OMAP_DEBUG_CLOCKDOMAIN
bool "Emit debug messages from clockdomain layer"
depends on ARCH_OMAP2 || ARCH_OMAP3
- default n
help
Say Y here if you want to compile in clockdomain layer
debugging messages for OMAP2/3. These messages can
@@ -110,11 +113,13 @@
config OMAP_MBOX_FWK
tristate "Mailbox framework support"
depends on ARCH_OMAP
- default n
help
Say Y here if you want to use OMAP Mailbox framework support for
DSP, IVA1.0 and IVA2 in OMAP1/2/3.
+config OMAP_IOMMU
+ tristate
+
choice
prompt "System timer"
default OMAP_MPU_TIMER
@@ -128,13 +133,13 @@
config OMAP_32K_TIMER
bool "Use 32KHz timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX, 24XX and 34XX.
+ currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
endchoice
@@ -149,7 +154,7 @@
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
help
Select this option if you want to use OMAP Dual-Mode timers.
@@ -171,7 +176,7 @@
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends on OMAP_MUX
+ depends on ARCH_OMAP1 && OMAP_MUX
default y
help
Select this option if you want to have your system wake up
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 04a100c..a832795 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -13,6 +13,7 @@
obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 29efc27..e8c327a 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,10 +36,40 @@
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
+/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
+ * clock framework is not up , it is defined here to avoid rework in
+ * every driver. Also dummy prcm reset function is added */
+
+/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
+#if defined(CONFIG_ARCH_OMAP4)
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+void omap2_clk_prepare_for_reboot(void)
+{
+}
+EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
+
+void omap_prcm_arch_reset(char mode)
+{
+}
+EXPORT_SYMBOL(omap_prcm_arch_reset);
+#endif
int clk_enable(struct clk *clk)
{
unsigned long flags;
int ret = 0;
+ if (cpu_is_omap44xx())
+ /* OMAP4 clk framework not supported yet */
+ return 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
@@ -140,6 +170,9 @@
unsigned long flags;
int ret = -EINVAL;
+ if (cpu_is_omap44xx())
+ /* OMAP4 clk framework not supported yet */
+ return 0;
if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
return ret;
@@ -240,13 +273,13 @@
}
/**
- * clk_init_one - initialize any fields in the struct clk before clk init
+ * clk_preinit - initialize any fields in the struct clk before clk init
* @clk: struct clk * to initialize
*
* Initialize any struct clk fields needed before normal clk initialization
* can run. No return value.
*/
-void clk_init_one(struct clk *clk)
+void clk_preinit(struct clk *clk)
{
INIT_LIST_HEAD(&clk->children);
}
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 433021f..ebcf0064 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -2,6 +2,10 @@
* linux/arch/arm/plat-omap/common.c
*
* Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -11,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/pm.h>
#include <linux/console.h>
#include <linux/serial.h>
#include <linux/tty.h>
@@ -175,25 +178,70 @@
* but systems won't necessarily want to spend resources that way.
*/
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED 0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define TIMER_32K_SYNCHRONIZED (OMAP2_32KSYNCT_BASE + 0x10)
-#endif
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
-#ifdef TIMER_32K_SYNCHRONIZED
+#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
#include <linux/clocksource.h>
-static cycle_t omap_32k_read(struct clocksource *cs)
+#ifdef CONFIG_ARCH_OMAP16XX
+static cycle_t omap16xx_32k_read(struct clocksource *cs)
{
- return omap_readl(TIMER_32K_SYNCHRONIZED);
+ return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+}
+#else
+#define omap16xx_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+static cycle_t omap2420_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2420_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static cycle_t omap2430_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2430_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static cycle_t omap34xx_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap34xx_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read NULL
+#endif
+
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+{
+ return 0;
}
static struct clocksource clocksource_32k = {
.name = "32k_counter",
.rating = 250,
- .read = omap_32k_read,
+ .read = omap_32k_read_dummy,
.mask = CLOCKSOURCE_MASK(32),
.shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
@@ -207,7 +255,7 @@
{
unsigned long long ret;
- ret = (unsigned long long)omap_32k_read(&clocksource_32k);
+ ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
return ret;
}
@@ -220,6 +268,19 @@
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
struct clk *sync_32k_ick;
+ if (cpu_is_omap16xx())
+ clocksource_32k.read = omap16xx_32k_read;
+ else if (cpu_is_omap2420())
+ clocksource_32k.read = omap2420_32k_read;
+ else if (cpu_is_omap2430())
+ clocksource_32k.read = omap2430_32k_read;
+ else if (cpu_is_omap34xx())
+ clocksource_32k.read = omap34xx_32k_read;
+ else if (cpu_is_omap44xx())
+ clocksource_32k.read = omap44xx_32k_read;
+ else
+ return -ENODEV;
+
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
if (sync_32k_ick)
clk_enable(sync_32k_ick);
@@ -234,15 +295,13 @@
}
arch_initcall(omap_init_clocksource_32k);
-#endif /* TIMER_32K_SYNCHRONIZED */
+#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
/* Global address base setup code */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-static struct omap_globals *omap2_globals;
-
-static void __init __omap2_set_globals(void)
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
{
omap2_set_globals_tap(omap2_globals);
omap2_set_globals_sdrc(omap2_globals);
@@ -266,8 +325,7 @@
void __init omap2_set_globals_242x(void)
{
- omap2_globals = &omap242x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap242x_globals);
}
#endif
@@ -285,8 +343,7 @@
void __init omap2_set_globals_243x(void)
{
- omap2_globals = &omap243x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap243x_globals);
}
#endif
@@ -304,8 +361,23 @@
void __init omap2_set_globals_343x(void)
{
- omap2_globals = &omap343x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap343x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+ .class = OMAP443X_CLASS,
+ .tap = OMAP2_IO_ADDRESS(0x4830a000),
+ .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+ .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+ .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+};
+
+void __init omap2_set_globals_443x(void)
+{
+ omap2_set_globals_tap(&omap4_globals);
+ omap2_set_globals_control(&omap4_globals);
}
#endif
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 87fb7ff..a64b692 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -311,6 +311,8 @@
wdt_resources[0].start = 0x49016000; /* WDT2 */
else if (cpu_is_omap343x())
wdt_resources[0].start = 0x48314000; /* WDT2 */
+ else if (cpu_is_omap44xx())
+ wdt_resources[0].start = 0x4a314000;
else
return;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fc8c04..def14ec 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -10,6 +10,9 @@
* Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
* Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* Support functions for the OMAP internal DMA channels.
*
* This program is free software; you can redistribute it and/or modify
@@ -310,41 +313,62 @@
void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
{
- u16 w;
-
BUG_ON(omap_dma_in_1510_mode());
+ if (cpu_class_is_omap1()) {
+ u16 w;
+
+ w = dma_read(CCR2(lch));
+ w &= ~0x03;
+
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ w |= 0x01;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ w |= 0x02;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ dma_write(w, CCR2(lch));
+
+ w = dma_read(LCH_CTRL(lch));
+ w &= ~0x0f;
+ /* Default is channel type 2D */
+ if (mode) {
+ dma_write((u16)color, COLOR_L(lch));
+ dma_write((u16)(color >> 16), COLOR_U(lch));
+ w |= 1; /* Channel type G */
+ }
+ dma_write(w, LCH_CTRL(lch));
+ }
+
if (cpu_class_is_omap2()) {
- REVISIT_24XX();
- return;
- }
+ u32 val;
- w = dma_read(CCR2(lch));
- w &= ~0x03;
+ val = dma_read(CCR(lch));
+ val &= ~((1 << 17) | (1 << 16));
- switch (mode) {
- case OMAP_DMA_CONSTANT_FILL:
- w |= 0x01;
- break;
- case OMAP_DMA_TRANSPARENT_COPY:
- w |= 0x02;
- break;
- case OMAP_DMA_COLOR_DIS:
- break;
- default:
- BUG();
- }
- dma_write(w, CCR2(lch));
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ val |= 1 << 16;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ val |= 1 << 17;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ dma_write(val, CCR(lch));
- w = dma_read(LCH_CTRL(lch));
- w &= ~0x0f;
- /* Default is channel type 2D */
- if (mode) {
- dma_write((u16)color, COLOR_L(lch));
- dma_write((u16)(color >> 16), COLOR_U(lch));
- w |= 1; /* Channel type G */
+ color &= 0xffffff;
+ dma_write(color, COLOR(lch));
}
- dma_write(w, LCH_CTRL(lch));
}
EXPORT_SYMBOL(omap_set_dma_color_mode);
@@ -851,7 +875,7 @@
}
l = dma_read(CCR(lch));
l &= ~((1 << 6) | (1 << 26));
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
@@ -1199,7 +1223,7 @@
* Failure: -EINVAL/-ENOMEM
*/
int omap_request_dma_chain(int dev_id, const char *dev_name,
- void (*callback) (int chain_id, u16 ch_status,
+ void (*callback) (int lch, u16 ch_status,
void *data),
int *chain_id, int no_of_chans, int chain_mode,
struct omap_dma_channel_params params)
@@ -1823,7 +1847,8 @@
#define omap1_dma_irq_handler NULL
#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
static int omap2_dma_handle_ch(int ch)
{
@@ -2318,6 +2343,9 @@
} else if (cpu_is_omap34xx()) {
omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap44xx()) {
+ omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");
return -ENODEV;
@@ -2416,12 +2444,18 @@
}
}
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (cpu_class_is_omap2())
- setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+ if (cpu_class_is_omap2()) {
+ int irq;
+ if (cpu_is_omap44xx())
+ irq = INT_44XX_SDMA_IRQ0;
+ else
+ irq = INT_24XX_SDMA_IRQ0;
+ setup_irq(irq, &omap24xx_dma_irq);
+ }
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 55bb996..7f50b61 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -7,6 +7,9 @@
* OMAP2 support by Juha Yrjola
* API improvements and OMAP2 clock framework support by Timo Teras
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -150,7 +153,8 @@
struct omap_dm_timer {
unsigned long phys_base;
int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clk *iclk, *fclk;
#endif
void __iomem *io_base;
@@ -169,6 +173,9 @@
#define omap3_dm_timers NULL
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap1_dm_timers[] = {
{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
@@ -191,6 +198,9 @@
#define omap3_dm_timers NULL
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap2_dm_timers[] = {
{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
@@ -214,7 +224,7 @@
NULL
};
-static struct clk **omap2_dm_source_clocks[3];
+static struct clk *omap2_dm_source_clocks[3];
static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
#elif defined(CONFIG_ARCH_OMAP3)
@@ -225,6 +235,9 @@
#define omap2_dm_timers NULL
#define omap2_dm_source_names NULL
#define omap2_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap3_dm_timers[] = {
{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
@@ -247,9 +260,43 @@
NULL
};
-static struct clk **omap3_dm_source_clocks[2];
+static struct clk *omap3_dm_source_clocks[2];
static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
+#elif defined(CONFIG_ARCH_OMAP4)
+
+#define omap_dm_clk_enable(x) clk_enable(x)
+#define omap_dm_clk_disable(x) clk_disable(x)
+#define omap1_dm_timers NULL
+#define omap2_dm_timers NULL
+#define omap2_dm_source_names NULL
+#define omap2_dm_source_clocks NULL
+#define omap3_dm_timers NULL
+#define omap3_dm_source_names NULL
+#define omap3_dm_source_clocks NULL
+
+static struct omap_dm_timer omap4_dm_timers[] = {
+ { .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
+ { .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
+ { .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
+ { .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
+ { .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
+ { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
+ { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
+ { .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
+ { .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
+ { .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
+ { .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
+ { .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+};
+static const char *omap4_dm_source_names[] __initdata = {
+ "sys_ck",
+ "omap_32k_fck",
+ NULL
+};
+static struct clk *omap4_dm_source_clocks[2];
+static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+
#else
#error OMAP architecture not supported!
@@ -257,7 +304,7 @@
#endif
static struct omap_dm_timer *dm_timers;
-static char **dm_source_names;
+static const char **dm_source_names;
static struct clk **dm_source_clocks;
static spinlock_t dm_timer_lock;
@@ -459,7 +506,8 @@
}
EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
-#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
@@ -705,12 +753,16 @@
dm_timers = omap1_dm_timers;
else if (cpu_is_omap24xx()) {
dm_timers = omap2_dm_timers;
- dm_source_names = (char **)omap2_dm_source_names;
- dm_source_clocks = (struct clk **)omap2_dm_source_clocks;
+ dm_source_names = omap2_dm_source_names;
+ dm_source_clocks = omap2_dm_source_clocks;
} else if (cpu_is_omap34xx()) {
dm_timers = omap3_dm_timers;
- dm_source_names = (char **)omap3_dm_source_names;
- dm_source_clocks = (struct clk **)omap3_dm_source_clocks;
+ dm_source_names = omap3_dm_source_names;
+ dm_source_clocks = omap3_dm_source_clocks;
+ } else if (cpu_is_omap44xx()) {
+ dm_timers = omap4_dm_timers;
+ dm_source_names = omap4_dm_source_names;
+ dm_source_clocks = omap4_dm_source_clocks;
}
if (cpu_class_is_omap2())
@@ -723,7 +775,8 @@
for (i = 0; i < dm_timer_count; i++) {
timer = &dm_timers[i];
timer->io_base = IO_ADDRESS(timer->phys_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
if (cpu_class_is_omap2()) {
char clk_name[16];
sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index ee0b21f..7fd89ba 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -6,6 +6,9 @@
* Copyright (C) 2003-2005 Nokia Corporation
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -146,6 +149,16 @@
#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000)
#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000)
+/*
+ * OMAP44XX specific GPIO registers
+ */
+#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000)
+
#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE)
struct gpio_bank {
@@ -153,11 +166,13 @@
u16 irq;
u16 virtual_irq_start;
int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
@@ -251,6 +266,24 @@
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+ { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+ METHOD_GPIO_24XX },
+};
+
+#endif
+
static struct gpio_bank *gpio_bank;
static int gpio_bank_count;
@@ -273,7 +306,7 @@
}
if (cpu_is_omap24xx())
return &gpio_bank[gpio >> 5];
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
return &gpio_bank[gpio >> 5];
BUG();
return NULL;
@@ -285,7 +318,7 @@
return gpio & 0x1f;
if (cpu_is_omap24xx())
return gpio & 0x1f;
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
return gpio & 0x1f;
return gpio & 0x0f;
}
@@ -307,7 +340,7 @@
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
- if (cpu_is_omap34xx() && gpio < 192)
+ if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
return 0;
return -1;
}
@@ -353,7 +386,8 @@
reg += OMAP850_GPIO_DIR_CONTROL;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
@@ -425,7 +459,8 @@
l &= ~(1 << gpio);
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -476,7 +511,8 @@
reg += OMAP850_GPIO_DATA_INPUT;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
@@ -520,7 +556,7 @@
else
goto done;
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (enable)
clk_enable(bank->dbck);
else
@@ -550,7 +586,8 @@
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
int trigger)
{
@@ -660,7 +697,8 @@
goto bad;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
break;
@@ -745,7 +783,8 @@
reg += OMAP850_GPIO_INT_STATUS;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
@@ -814,7 +853,8 @@
inv = 1;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
@@ -887,7 +927,8 @@
l |= gpio_mask;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -932,7 +973,8 @@
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (bank->non_wakeup_gpios & (1 << gpio)) {
printk(KERN_ERR "Unable to modify wakeup on "
@@ -1017,7 +1059,8 @@
__raw_writel(1 << offset, reg);
}
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1069,7 +1112,8 @@
if (bank->method == METHOD_GPIO_850)
isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
@@ -1346,7 +1390,7 @@
/*---------------------------------------------------------------------*/
static int initialized;
-#if !defined(CONFIG_ARCH_OMAP3)
+#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
static struct clk * gpio_ick;
#endif
@@ -1359,7 +1403,7 @@
static struct clk * gpio5_fck;
#endif
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
#endif
@@ -1419,8 +1463,8 @@
}
#endif
-#if defined(CONFIG_ARCH_OMAP3)
- if (cpu_is_omap34xx()) {
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
sprintf(clk_name, "gpio%d_ick", i + 1);
gpio_iclks[i] = clk_get(NULL, clk_name);
@@ -1497,6 +1541,17 @@
(rev >> 4) & 0x0f, rev & 0x0f);
}
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+ int rev;
+
+ gpio_bank_count = OMAP34XX_NR_GPIOS;
+ gpio_bank = gpio_bank_44xx;
+ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+ (rev >> 4) & 0x0f, rev & 0x0f);
+ }
+#endif
for (i = 0; i < gpio_bank_count; i++) {
int j, gpio_count = 16;
@@ -1520,7 +1575,8 @@
gpio_count = 32; /* 730 has 32-bit GPIOs */
}
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
static const u32 non_wakeup_gpios[] = {
0xe203ffc0, 0x08700040
@@ -1577,7 +1633,7 @@
set_irq_chained_handler(bank->irq, gpio_irq_handler);
set_irq_data(bank->irq, bank);
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
sprintf(clk_name, "gpio%d_dbck", i + 1);
bank->dbck = clk_get(NULL, clk_name);
if (IS_ERR(bank->dbck))
@@ -1599,7 +1655,8 @@
return 0;
}
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
{
int i;
@@ -1622,7 +1679,8 @@
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1663,7 +1721,8 @@
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -1695,7 +1754,8 @@
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
static int workaround_enabled;
@@ -1711,7 +1771,8 @@
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -1720,7 +1781,8 @@
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
@@ -1745,7 +1807,8 @@
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
__raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(bank->saved_risingdetect,
@@ -1755,14 +1818,16 @@
* state. If so, generate an IRQ by software. This is
* horribly racy, but it's the best we can do to work around
* this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
#endif
l ^= bank->saved_datain;
l &= bank->non_wakeup_gpios;
if (l) {
u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1798,7 +1863,8 @@
mpuio_init();
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
if (ret == 0) {
ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -1887,7 +1953,7 @@
irqstat = irq_desc[irq].status;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX)
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) {
char *trigger = NULL;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a303071..8b84839 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Nokia Corporation.
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 073a2c5..f9f65e1 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -22,7 +22,8 @@
void (*disable)(struct clk *);
};
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clksel_rate {
u32 val;
@@ -51,7 +52,7 @@
u8 max_divider;
u32 max_tolerance;
u16 max_multiplier;
-# if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
u8 modes;
void __iomem *autoidle_reg;
void __iomem *idlest_reg;
@@ -83,7 +84,8 @@
void (*init)(struct clk *);
__u8 enable_bit;
__s8 usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
u8 fixed_div;
void __iomem *clksel_reg;
u32 clksel_mask;
@@ -119,7 +121,7 @@
extern unsigned int mpurate;
extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_init_one(struct clk *clk);
+extern void clk_preinit(struct clk *clk);
extern int clk_register(struct clk *clk);
extern void clk_reparent(struct clk *child, struct clk *parent);
extern void clk_unregister(struct clk *clk);
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0ecf36d..fdeab42 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -33,8 +33,6 @@
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-extern void omap_serial_enable_clocks(int enable);
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
@@ -62,6 +60,7 @@
void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 269147f..8140dbc 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,9 +1,9 @@
/*
* arch/arm/plat-omap/include/mach/control.h
*
- * OMAP2/3 System Control Module definitions
+ * OMAP2/3/4 System Control Module definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
@@ -144,6 +144,10 @@
#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0)
#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
+/* 34xx D2D idle-related pins, handled by PM core */
+#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
+#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
@@ -189,8 +193,18 @@
#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1)
#define OMAP2_PBIASLITEVMODE0 (1 << 0)
+/* CONTROL_IVA2_BOOTMOD bits */
+#define OMAP3_IVA2_BOOTMOD_SHIFT 0
+#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0)
+#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0)
+
+/* CONTROL_PADCONF_X bits */
+#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
+#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
+
#ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 98b1442..fc60c4e 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -5,8 +5,12 @@
*
* Copyright (C) 2004, 2008 Nokia Corporation
*
+ * Copyright (C) 2009 Texas Instruments.
+ *
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -155,6 +159,8 @@
#define cpu_is_omap243x() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap343x() 0
+#define cpu_is_omap44xx() 0
+#define cpu_is_omap443x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
@@ -348,12 +354,21 @@
# define cpu_is_omap3430() is_omap3430()
#endif
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx() 1
+# define cpu_is_omap443x() 1
+# endif
+
/* Macros to detect if we have OMAP1 or OMAP2 */
#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
-#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
+#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
+ cpu_is_omap44xx())
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
@@ -370,6 +385,8 @@
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
+#define OMAP443X_CLASS 0x44300034
+
/*
* omap_chip bits
*
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b11f5c..ac24050 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -36,7 +36,7 @@
add \rx, \rx, #0x00004000 @ UART 3
#endif
-#elif CONFIG_ARCH_OMAP3
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xd8000000 @ virtual base
orr \rx, \rx, #0x0006a000
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 54fe966..8c1eae8 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -48,6 +48,7 @@
/* Hardware registers for omap2 and omap3 */
#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000)
#define OMAP_DMA4_REVISION 0x00
#define OMAP_DMA4_GCR 0x78
@@ -144,6 +145,7 @@
#define OMAP_DMA4_CSSA_U(n) 0
#define OMAP_DMA4_CDSA_L(n) 0
#define OMAP_DMA4_CDSA_U(n) 0
+#define OMAP1_DMA_COLOR(n) 0
/*----------------------------------------------------------------------------*/
@@ -531,7 +533,7 @@
/* Chaining APIs */
#ifndef CONFIG_ARCH_OMAP1
extern int omap_request_dma_chain(int dev_id, const char *dev_name,
- void (*callback) (int chain_id, u16 ch_status,
+ void (*callback) (int lch, u16 ch_status,
void *data),
int *chain_id, int no_of_chans,
int chain_mode,
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 2276f89..00f45c0 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -3,6 +3,9 @@
*
* Low-level IRQ helper macros for OMAP-based platforms
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
@@ -10,6 +13,7 @@
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
#if defined(CONFIG_ARCH_OMAP1)
@@ -56,15 +60,21 @@
.endm
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
-#if defined(CONFIG_ARCH_OMAP24XX)
#include <mach/omap24xx.h>
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
#include <mach/omap34xx.h>
-#endif
+/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+#include <mach/omap44xx.h>
+#endif
#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */
#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */
@@ -77,6 +87,7 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
+#ifndef CONFIG_ARCH_OMAP4
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP2_VA_IC_BASE
ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
@@ -92,6 +103,40 @@
and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
.endm
+#else
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an
+ * interrupt if it's between 30 and 1020. The test_for_ipi
+ * routine below will pick up on IPIs.
+ * A simple read from the controller will tell us the number
+ * of the highest priority enabled interrupt.
+ * We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =OMAP44XX_VA_GIC_CPU_BASE
+ ldr \irqstat, [\base, #GIC_CPU_INTACK]
+
+ ldr \tmp, =1021
+
+ bic \irqnr, \irqstat, #0x1c00
+
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+ .endm
+#endif
.macro irq_prio_table
.endm
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
new file mode 100644
index 0000000..b64fbee
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96 (1 << 4)
+#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+ int cs;
+ int gpio_irq;
+ int gpio_pwrdwn;
+ int gpio_reset;
+ int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */
+ u32 flags;
+ int (*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+ defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 3dc423e..26c1fbf 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -285,5 +285,6 @@
#include "omap16xx.h"
#include "omap24xx.h"
#include "omap34xx.h"
+#include "omap44xx.h"
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
index 577f492..886248d 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -2,10 +2,6 @@
#define _HWA742_H
struct hwa742_platform_data {
- void (*power_up)(struct device *dev);
- void (*power_down)(struct device *dev);
- unsigned long (*get_clock_rate)(struct device *dev);
-
unsigned te_connected:1;
};
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 0610d7e..3b28147 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -6,6 +6,9 @@
* Copied from arch/arm/mach-sa1100/include/mach/io.h
* Copyright (C) 1997-1999 Russell King
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -157,6 +160,40 @@
#define DSP_MMU_34XX_VIRT 0xe2000000
#define DSP_MMU_34XX_SIZE SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP4)
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS L3_44XX_BASE
+#define L3_44XX_VIRT 0xd4000000
+#define L3_44XX_SIZE SZ_1M
+
+#define L4_44XX_PHYS L4_44XX_BASE
+#define L4_44XX_VIRT 0xda000000
+#define L4_44XX_SIZE SZ_4M
+
+
+#define L4_WK_44XX_PHYS L4_WK_44XX_BASE
+#define L4_WK_44XX_VIRT 0xda300000
+#define L4_WK_44XX_SIZE SZ_1M
+
+#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
+#define L4_PER_44XX_VIRT 0xd8000000
+#define L4_PER_44XX_SIZE SZ_4M
+
+#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
+#define L4_EMU_44XX_VIRT 0xe4000000
+#define L4_EMU_44XX_SIZE SZ_64M
+
+#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
+#define OMAP44XX_GPMC_VIRT 0xe0000000
+#define OMAP44XX_GPMC_SIZE SZ_1M
+
+
+#define IO_OFFSET 0x90000000
+#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
+
#endif
#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
new file mode 100644
index 0000000..769b00b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu.h
@@ -0,0 +1,168 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+ u32 da;
+ u32 pa;
+ u32 pgsz, prsvd, valid;
+ union {
+ u16 ap;
+ struct {
+ u32 endian, elsz, mixed;
+ };
+ };
+};
+
+struct iommu {
+ const char *name;
+ struct module *owner;
+ struct clk *clk;
+ void __iomem *regbase;
+ struct device *dev;
+
+ unsigned int refcount;
+ struct mutex iommu_lock; /* global for this whole object */
+
+ /*
+ * We don't change iopgd for a situation like pgd for a task,
+ * but share it globally for each iommu.
+ */
+ u32 *iopgd;
+ spinlock_t page_table_lock; /* protect iopgd */
+
+ int nr_tlb_entries;
+
+ struct list_head mmap;
+ struct mutex mmap_lock; /* protect mmap */
+
+ int (*isr)(struct iommu *obj);
+
+ void *ctx; /* iommu context: registres saved area */
+};
+
+struct cr_regs {
+ union {
+ struct {
+ u16 cam_l;
+ u16 cam_h;
+ };
+ u32 cam;
+ };
+ union {
+ struct {
+ u16 ram_l;
+ u16 ram_h;
+ };
+ u32 ram;
+ };
+};
+
+struct iotlb_lock {
+ short base;
+ short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+ unsigned long version;
+
+ int (*enable)(struct iommu *obj);
+ void (*disable)(struct iommu *obj);
+ u32 (*fault_isr)(struct iommu *obj, u32 *ra);
+
+ void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
+ void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
+
+ struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
+ int (*cr_valid)(struct cr_regs *cr);
+ u32 (*cr_to_virt)(struct cr_regs *cr);
+ void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+ ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
+
+ u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+ void (*save_ctx)(struct iommu *obj);
+ void (*restore_ctx)(struct iommu *obj);
+ ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+};
+
+struct iommu_platform_data {
+ const char *name;
+ const char *clk_name;
+ const int nr_tlb_entries;
+};
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <mach/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes) \
+ (((bytes) >= SZ_16M) ? SZ_16M : \
+ ((bytes) >= SZ_1M) ? SZ_1M : \
+ ((bytes) >= SZ_64K) ? SZ_64K : \
+ ((bytes) >= SZ_4K) ? SZ_4K : 0)
+
+#define bytes_to_iopgsz(bytes) \
+ (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \
+ ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \
+ ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \
+ ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1)
+
+#define iopgsz_to_bytes(iopgsz) \
+ (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \
+ ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \
+ ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \
+ ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 iommu_arch_version(void);
+
+extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
+
+extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void flush_iotlb_page(struct iommu *obj, u32 da);
+extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
+extern void flush_iotlb_all(struct iommu *obj);
+
+extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
+
+extern struct iommu *iommu_get(const char *name);
+extern void iommu_put(struct iommu *obj);
+
+extern void iommu_save_ctx(struct iommu *obj);
+extern void iommu_restore_ctx(struct iommu *obj);
+
+extern int install_iommu_arch(const struct iommu_functions *ops);
+extern void uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int foreach_iommu_device(void *data,
+ int (*fn)(struct device *, void *));
+
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+
+#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h
new file mode 100644
index 0000000..10ad05f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu2.h
@@ -0,0 +1,96 @@
+/*
+ * omap iommu: omap2 architecture specific definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU2_H
+#define __MACH_IOMMU2_H
+
+#include <linux/io.h>
+
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION 0x00
+#define MMU_SYSCONFIG 0x10
+#define MMU_SYSSTATUS 0x14
+#define MMU_IRQSTATUS 0x18
+#define MMU_IRQENABLE 0x1c
+#define MMU_WALKING_ST 0x40
+#define MMU_CNTL 0x44
+#define MMU_FAULT_AD 0x48
+#define MMU_TTB 0x4c
+#define MMU_LOCK 0x50
+#define MMU_LD_TLB 0x54
+#define MMU_CAM 0x58
+#define MMU_RAM 0x5c
+#define MMU_GFLUSH 0x60
+#define MMU_FLUSH_ENTRY 0x64
+#define MMU_READ_CAM 0x68
+#define MMU_READ_RAM 0x6c
+#define MMU_EMU_FAULT_AD 0x70
+
+#define MMU_REG_SIZE 256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_LOCK_BASE_SHIFT 10
+#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x) \
+ ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT 4
+#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x) \
+ ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+#define MMU_CAM_VATAG_SHIFT 12
+#define MMU_CAM_VATAG_MASK \
+ ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P (1 << 3)
+#define MMU_CAM_V (1 << 2)
+#define MMU_CAM_PGSZ_MASK 3
+#define MMU_CAM_PGSZ_1M (0 << 0)
+#define MMU_CAM_PGSZ_64K (1 << 0)
+#define MMU_CAM_PGSZ_4K (2 << 0)
+#define MMU_CAM_PGSZ_16M (3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT 12
+#define MMU_RAM_PADDR_MASK \
+ ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+#define MMU_RAM_ENDIAN_SHIFT 9
+#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_SHIFT 7
+#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT 6
+#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK
+
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct iommu *obj, size_t offs)
+{
+ return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs)
+{
+ __raw_writel(val, obj->regbase + offs);
+}
+
+#endif /* __MACH_IOMMU2_H */
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h
new file mode 100644
index 0000000..bdc7ce5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iovmm.h
@@ -0,0 +1,94 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOMMU_MMAP_H
+#define __IOMMU_MMAP_H
+
+struct iovm_struct {
+ struct iommu *iommu; /* iommu object which this belongs to */
+ u32 da_start; /* area definition */
+ u32 da_end;
+ u32 flags; /* IOVMF_: see below */
+ struct list_head list; /* linked in ascending order */
+ const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */
+ void *va; /* mpu side mapped address */
+};
+
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT 16
+#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT)
+#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1)
+#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK (~((1 << 10) - 1))
+#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK (3 << 0)
+#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK (1 << 9)
+#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG
+#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE
+
+#define IOVMF_ELSZ_MASK (3 << 7)
+#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8
+#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK (1 << 6)
+#define IOVMF_MIXED MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_ANON (2 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_MASK (3 << (4 + IOVMF_SW_SHIFT))
+
+
+extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
+extern u32 iommu_vmap(struct iommu *obj, u32 da,
+ const struct sg_table *sgt, u32 flags);
+extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da);
+extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes,
+ u32 flags);
+extern void iommu_vfree(struct iommu *obj, const u32 da);
+extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+ u32 flags);
+extern void iommu_kunmap(struct iommu *obj, u32 da);
+extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes,
+ u32 flags);
+extern void iommu_kfree(struct iommu *obj, u32 da);
+
+extern void *da_to_va(struct iommu *obj, u32 da);
+
+#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 7f57ee6..8015fe2 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -4,6 +4,9 @@
* Copyright (C) Greg Lonnon 2001
* Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -422,6 +425,92 @@
#define INT_34XX_BENCH_MPU_EMUL 3
+
+#define IRQ_GIC_START 32
+
+#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START)
+
+
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
@@ -467,6 +556,7 @@
#ifndef __ASSEMBLY__
extern void omap_init_irq(void);
+extern int omap_irq_pending(void);
#endif
#include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 232923a..45ea3ae 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -33,7 +33,11 @@
#define GROUP_3 (3 << 16)
#define GROUP_MASK GROUP_3
+#define KEY_PERSISTENT 0x00800000
+#define KEYNUM_MASK 0x00EFFFFF
#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+ KEY_PERSISTENT)
#endif
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 99ed564..9ad41dc 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,8 @@
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
#define PHYS_OFFSET UL(0x80000000)
#endif
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 24335d4..696edfc 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -85,23 +85,5 @@
#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
#endif /* __ASM_ARCH_OMAP24XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index ab64015..f8d186a 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -31,13 +31,9 @@
#define L4_34XX_BASE 0x48000000
#define L4_WK_34XX_BASE 0x48300000
-#define L4_WK_OMAP_BASE L4_WK_34XX_BASE
#define L4_PER_34XX_BASE 0x49000000
-#define L4_PER_OMAP_BASE L4_PER_34XX_BASE
#define L4_EMU_34XX_BASE 0x54000000
-#define L4_EMU_BASE L4_EMU_34XX_BASE
#define L3_34XX_BASE 0x68000000
-#define L3_OMAP_BASE L3_34XX_BASE
#define OMAP3430_32KSYNCT_BASE 0x48320000
#define OMAP3430_CM_BASE 0x48004800
@@ -83,15 +79,6 @@
#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
#define OMAP34XX_DSP_BASE 0x58000000
#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0)
#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
new file mode 100644
index 0000000..15dec7f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE 0x4a000000
+#define L4_WK_44XX_BASE 0x4a300000
+#define L4_PER_44XX_BASE 0x48000000
+#define L4_EMU_44XX_BASE 0x54000000
+#define L3_44XX_BASE 0x44000000
+#define OMAP4430_32KSYNCT_BASE 0x4a304000
+#define OMAP4430_CM_BASE 0x4a004000
+#define OMAP4430_PRM_BASE 0x48306000
+#define OMAP44XX_GPMC_BASE 0x50000000
+#define OMAP443X_SCM_BASE 0x4a002000
+#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE 0x48200000
+#define OMAP44XX_IVA_INTC_BASE 0x40000000
+#define IRQ_SIR_IRQ 0x0040
+#define OMAP44XX_GIC_DIST_BASE 0x48241000
+#define OMAP44XX_GIC_CPU_BASE 0x48240100
+#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_SCU_BASE 0x48240000
+#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
+#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
+#define OMAP44XX_WKUPGEN_BASE 0x48281000
+#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 4649d30..72f433d 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -9,8 +9,12 @@
* published by the Free Software Foundation.
*/
+#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#define ONENAND_SYNC_READ (1 << 0)
+#define ONENAND_SYNC_READWRITE (1 << 1)
+
struct omap_onenand_platform_data {
int cs;
int gpio_irq;
@@ -18,8 +22,22 @@
int nr_parts;
int (*onenand_setup)(void __iomem *, int freq);
int dma_channel;
+ u8 flags;
};
-int omap2_onenand_rephase(void);
-
#define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 8a676a0..13abd02 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -1,5 +1,8 @@
/*
- * arch/arm/plat-omap/include/mach/serial.h
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,19 +18,28 @@
#define OMAP_UART1_BASE 0xfffb0000
#define OMAP_UART2_BASE 0xfffb0800
#define OMAP_UART3_BASE 0xfffb9800
+#define OMAP_MAX_NR_PORTS 3
#elif defined(CONFIG_ARCH_OMAP2)
/* OMAP2 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x4806e000
+#define OMAP_MAX_NR_PORTS 3
#elif defined(CONFIG_ARCH_OMAP3)
/* OMAP3 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x49020000
+#define OMAP_MAX_NR_PORTS 3
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE 0x4806a000
+#define OMAP_UART2_BASE 0x4806c000
+#define OMAP_UART3_BASE 0x48020000
+#define OMAP_UART4_BASE 0x4806e000
+#define OMAP_MAX_NR_PORTS 4
#endif
-#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
@@ -40,4 +52,13 @@
__ret; \
})
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+extern int omap_uart_can_sleep(void);
+extern void omap_uart_check_wakeup(void);
+extern void omap_uart_prepare_suspend(void);
+extern void omap_uart_prepare_idle(int num);
+extern void omap_uart_resume_idle(int num);
+#endif
+
#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index ab35d62..dca7c16 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -23,7 +23,8 @@
extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2);
+ u32 sdrc_actim_ctrlb, u32 m2,
+ u32 unlock_dll);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -60,7 +61,8 @@
extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2);
+ u32 sdrc_actim_ctrlb, u32 m2,
+ u32 unlock_dll);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index 69f0cee..f337e17 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,13 +27,7 @@
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-#ifdef CONFIG_USB_MUSB_SOC
extern void usb_musb_init(void);
-#else
-static inline void usb_musb_init(void)
-{
-}
-#endif
#endif
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index dc104cd..b97dfaf 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -17,5 +17,5 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index af326ef..9b42d72 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -1,3 +1,14 @@
+/*
+ * Common io.c file
+ * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
@@ -7,6 +18,7 @@
#include <mach/omap16xx.h>
#include <mach/omap24xx.h>
#include <mach/omap34xx.h>
+#include <mach/omap44xx.h>
#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
@@ -92,7 +104,22 @@
return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
}
#endif
-
+#ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+ if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
+ return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
+ if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
+ return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
+ if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
+ return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+ if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+ return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+ if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+ return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+ if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+ return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
+ }
+#endif
return __arm_ioremap(p, size, type);
}
EXPORT_SYMBOL(omap_ioremap);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
new file mode 100644
index 0000000..4cf449f
--- /dev/null
+++ b/arch/arm/plat-omap/iommu.c
@@ -0,0 +1,996 @@
+/*
+ * omap iommu: tlb and pagetable primitives
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ * Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/iommu.h>
+
+#include "iopgtable.h"
+
+/* accommodate the difference between omap1 and omap2/3 */
+static const struct iommu_functions *arch_iommu;
+
+static struct platform_driver omap_iommu_driver;
+static struct kmem_cache *iopte_cachep;
+
+/**
+ * install_iommu_arch - Install archtecure specific iommu functions
+ * @ops: a pointer to architecture specific iommu functions
+ *
+ * There are several kind of iommu algorithm(tlb, pagetable) among
+ * omap series. This interface installs such an iommu algorighm.
+ **/
+int install_iommu_arch(const struct iommu_functions *ops)
+{
+ if (arch_iommu)
+ return -EBUSY;
+
+ arch_iommu = ops;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(install_iommu_arch);
+
+/**
+ * uninstall_iommu_arch - Uninstall archtecure specific iommu functions
+ * @ops: a pointer to architecture specific iommu functions
+ *
+ * This interface uninstalls the iommu algorighm installed previously.
+ **/
+void uninstall_iommu_arch(const struct iommu_functions *ops)
+{
+ if (arch_iommu != ops)
+ pr_err("%s: not your arch\n", __func__);
+
+ arch_iommu = NULL;
+}
+EXPORT_SYMBOL_GPL(uninstall_iommu_arch);
+
+/**
+ * iommu_save_ctx - Save registers for pm off-mode support
+ * @obj: target iommu
+ **/
+void iommu_save_ctx(struct iommu *obj)
+{
+ arch_iommu->save_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_save_ctx);
+
+/**
+ * iommu_restore_ctx - Restore registers for pm off-mode support
+ * @obj: target iommu
+ **/
+void iommu_restore_ctx(struct iommu *obj)
+{
+ arch_iommu->restore_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_restore_ctx);
+
+/**
+ * iommu_arch_version - Return running iommu arch version
+ **/
+u32 iommu_arch_version(void)
+{
+ return arch_iommu->version;
+}
+EXPORT_SYMBOL_GPL(iommu_arch_version);
+
+static int iommu_enable(struct iommu *obj)
+{
+ int err;
+
+ if (!obj)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ err = arch_iommu->enable(obj);
+
+ clk_disable(obj->clk);
+ return err;
+}
+
+static void iommu_disable(struct iommu *obj)
+{
+ if (!obj)
+ return;
+
+ clk_enable(obj->clk);
+
+ arch_iommu->disable(obj);
+
+ clk_disable(obj->clk);
+}
+
+/*
+ * TLB operations
+ */
+void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+ BUG_ON(!cr || !e);
+
+ arch_iommu->cr_to_e(cr, e);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_e);
+
+static inline int iotlb_cr_valid(struct cr_regs *cr)
+{
+ if (!cr)
+ return -EINVAL;
+
+ return arch_iommu->cr_valid(cr);
+}
+
+static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj,
+ struct iotlb_entry *e)
+{
+ if (!e)
+ return NULL;
+
+ return arch_iommu->alloc_cr(obj, e);
+}
+
+u32 iotlb_cr_to_virt(struct cr_regs *cr)
+{
+ return arch_iommu->cr_to_virt(cr);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_virt);
+
+static u32 get_iopte_attr(struct iotlb_entry *e)
+{
+ return arch_iommu->get_pte_attr(e);
+}
+
+static u32 iommu_report_fault(struct iommu *obj, u32 *da)
+{
+ return arch_iommu->fault_isr(obj, da);
+}
+
+static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
+{
+ u32 val;
+
+ val = iommu_read_reg(obj, MMU_LOCK);
+
+ l->base = MMU_LOCK_BASE(val);
+ l->vict = MMU_LOCK_VICT(val);
+
+ BUG_ON(l->base != 0); /* Currently no preservation is used */
+}
+
+static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
+{
+ u32 val;
+
+ BUG_ON(l->base != 0); /* Currently no preservation is used */
+
+ val = (l->base << MMU_LOCK_BASE_SHIFT);
+ val |= (l->vict << MMU_LOCK_VICT_SHIFT);
+
+ iommu_write_reg(obj, val, MMU_LOCK);
+}
+
+static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ arch_iommu->tlb_read_cr(obj, cr);
+}
+
+static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ arch_iommu->tlb_load_cr(obj, cr);
+
+ iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+ iommu_write_reg(obj, 1, MMU_LD_TLB);
+}
+
+/**
+ * iotlb_dump_cr - Dump an iommu tlb entry into buf
+ * @obj: target iommu
+ * @cr: contents of cam and ram register
+ * @buf: output buffer
+ **/
+static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
+ char *buf)
+{
+ BUG_ON(!cr || !buf);
+
+ return arch_iommu->dump_cr(obj, cr, buf);
+}
+
+/**
+ * load_iotlb_entry - Set an iommu tlb entry
+ * @obj: target iommu
+ * @e: an iommu tlb entry info
+ **/
+int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+ int i;
+ int err = 0;
+ struct iotlb_lock l;
+ struct cr_regs *cr;
+
+ if (!obj || !obj->nr_tlb_entries || !e)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ for (i = 0; i < obj->nr_tlb_entries; i++) {
+ struct cr_regs tmp;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = i;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &tmp);
+ if (!iotlb_cr_valid(&tmp))
+ break;
+ }
+
+ if (i == obj->nr_tlb_entries) {
+ dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+ err = -EBUSY;
+ goto out;
+ }
+
+ cr = iotlb_alloc_cr(obj, e);
+ if (IS_ERR(cr)) {
+ clk_disable(obj->clk);
+ return PTR_ERR(cr);
+ }
+
+ iotlb_load_cr(obj, cr);
+ kfree(cr);
+
+ /* increment victim for next tlb load */
+ if (++l.vict == obj->nr_tlb_entries)
+ l.vict = 0;
+ iotlb_lock_set(obj, &l);
+out:
+ clk_disable(obj->clk);
+ return err;
+}
+EXPORT_SYMBOL_GPL(load_iotlb_entry);
+
+/**
+ * flush_iotlb_page - Clear an iommu tlb entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_page(struct iommu *obj, u32 da)
+{
+ struct iotlb_lock l;
+ int i;
+
+ clk_enable(obj->clk);
+
+ for (i = 0; i < obj->nr_tlb_entries; i++) {
+ struct cr_regs cr;
+ u32 start;
+ size_t bytes;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = i;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &cr);
+ if (!iotlb_cr_valid(&cr))
+ continue;
+
+ start = iotlb_cr_to_virt(&cr);
+ bytes = iopgsz_to_bytes(cr.cam & 3);
+
+ if ((start <= da) && (da < start + bytes)) {
+ dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
+ __func__, start, da, bytes);
+
+ iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+ }
+ }
+ clk_disable(obj->clk);
+
+ if (i == obj->nr_tlb_entries)
+ dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_page);
+
+/**
+ * flush_iotlb_range - Clear an iommu tlb entries
+ * @obj: target iommu
+ * @start: iommu device virtual address(start)
+ * @end: iommu device virtual address(end)
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_range(struct iommu *obj, u32 start, u32 end)
+{
+ u32 da = start;
+
+ while (da < end) {
+ flush_iotlb_page(obj, da);
+ /* FIXME: Optimize for multiple page size */
+ da += IOPTE_SIZE;
+ }
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_range);
+
+/**
+ * flush_iotlb_all - Clear all iommu tlb entries
+ * @obj: target iommu
+ **/
+void flush_iotlb_all(struct iommu *obj)
+{
+ struct iotlb_lock l;
+
+ clk_enable(obj->clk);
+
+ l.base = 0;
+ l.vict = 0;
+ iotlb_lock_set(obj, &l);
+
+ iommu_write_reg(obj, 1, MMU_GFLUSH);
+
+ clk_disable(obj->clk);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_all);
+
+#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
+
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+ ssize_t bytes;
+
+ if (!obj || !buf)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ bytes = arch_iommu->dump_ctx(obj, buf);
+
+ clk_disable(obj->clk);
+
+ return bytes;
+}
+EXPORT_SYMBOL_GPL(iommu_dump_ctx);
+
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+{
+ int i;
+ struct iotlb_lock saved, l;
+ struct cr_regs *p = crs;
+
+ clk_enable(obj->clk);
+
+ iotlb_lock_get(obj, &saved);
+ memcpy(&l, &saved, sizeof(saved));
+
+ for (i = 0; i < obj->nr_tlb_entries; i++) {
+ struct cr_regs tmp;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = i;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &tmp);
+ if (!iotlb_cr_valid(&tmp))
+ continue;
+
+ *p++ = tmp;
+ }
+ iotlb_lock_set(obj, &saved);
+ clk_disable(obj->clk);
+
+ return p - crs;
+}
+
+/**
+ * dump_tlb_entries - dump cr arrays to given buffer
+ * @obj: target iommu
+ * @buf: output buffer
+ **/
+size_t dump_tlb_entries(struct iommu *obj, char *buf)
+{
+ int i, n;
+ struct cr_regs *cr;
+ char *p = buf;
+
+ cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+ if (!cr)
+ return 0;
+
+ n = __dump_tlb_entries(obj, cr);
+ for (i = 0; i < n; i++)
+ p += iotlb_dump_cr(obj, cr + i, p);
+ kfree(cr);
+
+ return p - buf;
+}
+EXPORT_SYMBOL_GPL(dump_tlb_entries);
+
+int foreach_iommu_device(void *data, int (*fn)(struct device *, void *))
+{
+ return driver_for_each_device(&omap_iommu_driver.driver,
+ NULL, data, fn);
+}
+EXPORT_SYMBOL_GPL(foreach_iommu_device);
+
+#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */
+
+/*
+ * H/W pagetable operations
+ */
+static void flush_iopgd_range(u32 *first, u32 *last)
+{
+ /* FIXME: L2 cache should be taken care of if it exists */
+ do {
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pgd"
+ : : "r" (first));
+ first += L1_CACHE_BYTES / sizeof(*first);
+ } while (first <= last);
+}
+
+static void flush_iopte_range(u32 *first, u32 *last)
+{
+ /* FIXME: L2 cache should be taken care of if it exists */
+ do {
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pte"
+ : : "r" (first));
+ first += L1_CACHE_BYTES / sizeof(*first);
+ } while (first <= last);
+}
+
+static void iopte_free(u32 *iopte)
+{
+ /* Note: freed iopte's must be clean ready for re-use */
+ kmem_cache_free(iopte_cachep, iopte);
+}
+
+static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da)
+{
+ u32 *iopte;
+
+ /* a table has already existed */
+ if (*iopgd)
+ goto pte_ready;
+
+ /*
+ * do the allocation outside the page table lock
+ */
+ spin_unlock(&obj->page_table_lock);
+ iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL);
+ spin_lock(&obj->page_table_lock);
+
+ if (!*iopgd) {
+ if (!iopte)
+ return ERR_PTR(-ENOMEM);
+
+ *iopgd = virt_to_phys(iopte) | IOPGD_TABLE;
+ flush_iopgd_range(iopgd, iopgd);
+
+ dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte);
+ } else {
+ /* We raced, free the reduniovant table */
+ iopte_free(iopte);
+ }
+
+pte_ready:
+ iopte = iopte_offset(iopgd, da);
+
+ dev_vdbg(obj->dev,
+ "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+ __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+ return iopte;
+}
+
+static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+
+ *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
+ flush_iopgd_range(iopgd, iopgd);
+ return 0;
+}
+
+static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ int i;
+
+ for (i = 0; i < 16; i++)
+ *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
+ flush_iopgd_range(iopgd, iopgd + 15);
+ return 0;
+}
+
+static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ u32 *iopte = iopte_alloc(obj, iopgd, da);
+
+ if (IS_ERR(iopte))
+ return PTR_ERR(iopte);
+
+ *iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL;
+ flush_iopte_range(iopte, iopte);
+
+ dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n",
+ __func__, da, pa, iopte, *iopte);
+
+ return 0;
+}
+
+static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ u32 *iopte = iopte_alloc(obj, iopgd, da);
+ int i;
+
+ if (IS_ERR(iopte))
+ return PTR_ERR(iopte);
+
+ for (i = 0; i < 16; i++)
+ *(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE;
+ flush_iopte_range(iopte, iopte + 15);
+ return 0;
+}
+
+static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e)
+{
+ int (*fn)(struct iommu *, u32, u32, u32);
+ u32 prot;
+ int err;
+
+ if (!obj || !e)
+ return -EINVAL;
+
+ switch (e->pgsz) {
+ case MMU_CAM_PGSZ_16M:
+ fn = iopgd_alloc_super;
+ break;
+ case MMU_CAM_PGSZ_1M:
+ fn = iopgd_alloc_section;
+ break;
+ case MMU_CAM_PGSZ_64K:
+ fn = iopte_alloc_large;
+ break;
+ case MMU_CAM_PGSZ_4K:
+ fn = iopte_alloc_page;
+ break;
+ default:
+ fn = NULL;
+ BUG();
+ break;
+ }
+
+ prot = get_iopte_attr(e);
+
+ spin_lock(&obj->page_table_lock);
+ err = fn(obj, e->da, e->pa, prot);
+ spin_unlock(&obj->page_table_lock);
+
+ return err;
+}
+
+/**
+ * iopgtable_store_entry - Make an iommu pte entry
+ * @obj: target iommu
+ * @e: an iommu tlb entry info
+ **/
+int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+ int err;
+
+ flush_iotlb_page(obj, e->da);
+ err = iopgtable_store_entry_core(obj, e);
+#ifdef PREFETCH_IOTLB
+ if (!err)
+ load_iotlb_entry(obj, e);
+#endif
+ return err;
+}
+EXPORT_SYMBOL_GPL(iopgtable_store_entry);
+
+/**
+ * iopgtable_lookup_entry - Lookup an iommu pte entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ * @ppgd: iommu pgd entry pointer to be returned
+ * @ppte: iommu pte entry pointer to be returned
+ **/
+void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
+{
+ u32 *iopgd, *iopte = NULL;
+
+ iopgd = iopgd_offset(obj, da);
+ if (!*iopgd)
+ goto out;
+
+ if (*iopgd & IOPGD_TABLE)
+ iopte = iopte_offset(iopgd, da);
+out:
+ *ppgd = iopgd;
+ *ppte = iopte;
+}
+EXPORT_SYMBOL_GPL(iopgtable_lookup_entry);
+
+static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
+{
+ size_t bytes;
+ u32 *iopgd = iopgd_offset(obj, da);
+ int nent = 1;
+
+ if (!*iopgd)
+ return 0;
+
+ if (*iopgd & IOPGD_TABLE) {
+ int i;
+ u32 *iopte = iopte_offset(iopgd, da);
+
+ bytes = IOPTE_SIZE;
+ if (*iopte & IOPTE_LARGE) {
+ nent *= 16;
+ /* rewind to the 1st entry */
+ iopte = (u32 *)((u32)iopte & IOLARGE_MASK);
+ }
+ bytes *= nent;
+ memset(iopte, 0, nent * sizeof(*iopte));
+ flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte));
+
+ /*
+ * do table walk to check if this table is necessary or not
+ */
+ iopte = iopte_offset(iopgd, 0);
+ for (i = 0; i < PTRS_PER_IOPTE; i++)
+ if (iopte[i])
+ goto out;
+
+ iopte_free(iopte);
+ nent = 1; /* for the next L1 entry */
+ } else {
+ bytes = IOPGD_SIZE;
+ if (*iopgd & IOPGD_SUPER) {
+ nent *= 16;
+ /* rewind to the 1st entry */
+ iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
+ }
+ bytes *= nent;
+ }
+ memset(iopgd, 0, nent * sizeof(*iopgd));
+ flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd));
+out:
+ return bytes;
+}
+
+/**
+ * iopgtable_clear_entry - Remove an iommu pte entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ **/
+size_t iopgtable_clear_entry(struct iommu *obj, u32 da)
+{
+ size_t bytes;
+
+ spin_lock(&obj->page_table_lock);
+
+ bytes = iopgtable_clear_entry_core(obj, da);
+ flush_iotlb_page(obj, da);
+
+ spin_unlock(&obj->page_table_lock);
+
+ return bytes;
+}
+EXPORT_SYMBOL_GPL(iopgtable_clear_entry);
+
+static void iopgtable_clear_entry_all(struct iommu *obj)
+{
+ int i;
+
+ spin_lock(&obj->page_table_lock);
+
+ for (i = 0; i < PTRS_PER_IOPGD; i++) {
+ u32 da;
+ u32 *iopgd;
+
+ da = i << IOPGD_SHIFT;
+ iopgd = iopgd_offset(obj, da);
+
+ if (!*iopgd)
+ continue;
+
+ if (*iopgd & IOPGD_TABLE)
+ iopte_free(iopte_offset(iopgd, 0));
+
+ *iopgd = 0;
+ flush_iopgd_range(iopgd, iopgd);
+ }
+
+ flush_iotlb_all(obj);
+
+ spin_unlock(&obj->page_table_lock);
+}
+
+/*
+ * Device IOMMU generic operations
+ */
+static irqreturn_t iommu_fault_handler(int irq, void *data)
+{
+ u32 stat, da;
+ u32 *iopgd, *iopte;
+ int err = -EIO;
+ struct iommu *obj = data;
+
+ if (!obj->refcount)
+ return IRQ_NONE;
+
+ /* Dynamic loading TLB or PTE */
+ if (obj->isr)
+ err = obj->isr(obj);
+
+ if (!err)
+ return IRQ_HANDLED;
+
+ clk_enable(obj->clk);
+ stat = iommu_report_fault(obj, &da);
+ clk_disable(obj->clk);
+ if (!stat)
+ return IRQ_HANDLED;
+
+ iopgd = iopgd_offset(obj, da);
+
+ if (!(*iopgd & IOPGD_TABLE)) {
+ dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
+ da, iopgd, *iopgd);
+ return IRQ_NONE;
+ }
+
+ iopte = iopte_offset(iopgd, da);
+
+ dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+ __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+ return IRQ_NONE;
+}
+
+static int device_match_by_alias(struct device *dev, void *data)
+{
+ struct iommu *obj = to_iommu(dev);
+ const char *name = data;
+
+ pr_debug("%s: %s %s\n", __func__, obj->name, name);
+
+ return strcmp(obj->name, name) == 0;
+}
+
+/**
+ * iommu_get - Get iommu handler
+ * @name: target iommu name
+ **/
+struct iommu *iommu_get(const char *name)
+{
+ int err = -ENOMEM;
+ struct device *dev;
+ struct iommu *obj;
+
+ dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
+ device_match_by_alias);
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
+ obj = to_iommu(dev);
+
+ mutex_lock(&obj->iommu_lock);
+
+ if (obj->refcount++ == 0) {
+ err = iommu_enable(obj);
+ if (err)
+ goto err_enable;
+ flush_iotlb_all(obj);
+ }
+
+ if (!try_module_get(obj->owner))
+ goto err_module;
+
+ mutex_unlock(&obj->iommu_lock);
+
+ dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+ return obj;
+
+err_module:
+ if (obj->refcount == 1)
+ iommu_disable(obj);
+err_enable:
+ obj->refcount--;
+ mutex_unlock(&obj->iommu_lock);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(iommu_get);
+
+/**
+ * iommu_put - Put back iommu handler
+ * @obj: target iommu
+ **/
+void iommu_put(struct iommu *obj)
+{
+ if (!obj && IS_ERR(obj))
+ return;
+
+ mutex_lock(&obj->iommu_lock);
+
+ if (--obj->refcount == 0)
+ iommu_disable(obj);
+
+ module_put(obj->owner);
+
+ mutex_unlock(&obj->iommu_lock);
+
+ dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+}
+EXPORT_SYMBOL_GPL(iommu_put);
+
+/*
+ * OMAP Device MMU(IOMMU) detection
+ */
+static int __devinit omap_iommu_probe(struct platform_device *pdev)
+{
+ int err = -ENODEV;
+ void *p;
+ int irq;
+ struct iommu *obj;
+ struct resource *res;
+ struct iommu_platform_data *pdata = pdev->dev.platform_data;
+
+ if (pdev->num_resources != 2)
+ return -EINVAL;
+
+ obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
+ if (!obj)
+ return -ENOMEM;
+
+ obj->clk = clk_get(&pdev->dev, pdata->clk_name);
+ if (IS_ERR(obj->clk))
+ goto err_clk;
+
+ obj->nr_tlb_entries = pdata->nr_tlb_entries;
+ obj->name = pdata->name;
+ obj->dev = &pdev->dev;
+ obj->ctx = (void *)obj + sizeof(*obj);
+
+ mutex_init(&obj->iommu_lock);
+ mutex_init(&obj->mmap_lock);
+ spin_lock_init(&obj->page_table_lock);
+ INIT_LIST_HEAD(&obj->mmap);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ err = -ENODEV;
+ goto err_mem;
+ }
+ obj->regbase = ioremap(res->start, resource_size(res));
+ if (!obj->regbase) {
+ err = -ENOMEM;
+ goto err_mem;
+ }
+
+ res = request_mem_region(res->start, resource_size(res),
+ dev_name(&pdev->dev));
+ if (!res) {
+ err = -EIO;
+ goto err_mem;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ err = -ENODEV;
+ goto err_irq;
+ }
+ err = request_irq(irq, iommu_fault_handler, IRQF_SHARED,
+ dev_name(&pdev->dev), obj);
+ if (err < 0)
+ goto err_irq;
+ platform_set_drvdata(pdev, obj);
+
+ p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE));
+ if (!p) {
+ err = -ENOMEM;
+ goto err_pgd;
+ }
+ memset(p, 0, IOPGD_TABLE_SIZE);
+ clean_dcache_area(p, IOPGD_TABLE_SIZE);
+ obj->iopgd = p;
+
+ BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE));
+
+ dev_info(&pdev->dev, "%s registered\n", obj->name);
+ return 0;
+
+err_pgd:
+ free_irq(irq, obj);
+err_irq:
+ release_mem_region(res->start, resource_size(res));
+ iounmap(obj->regbase);
+err_mem:
+ clk_put(obj->clk);
+err_clk:
+ kfree(obj);
+ return err;
+}
+
+static int __devexit omap_iommu_remove(struct platform_device *pdev)
+{
+ int irq;
+ struct resource *res;
+ struct iommu *obj = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ iopgtable_clear_entry_all(obj);
+ free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE));
+
+ irq = platform_get_irq(pdev, 0);
+ free_irq(irq, obj);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+ iounmap(obj->regbase);
+
+ clk_put(obj->clk);
+ dev_info(&pdev->dev, "%s removed\n", obj->name);
+ kfree(obj);
+ return 0;
+}
+
+static struct platform_driver omap_iommu_driver = {
+ .probe = omap_iommu_probe,
+ .remove = __devexit_p(omap_iommu_remove),
+ .driver = {
+ .name = "omap-iommu",
+ },
+};
+
+static void iopte_cachep_ctor(void *iopte)
+{
+ clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
+}
+
+static int __init omap_iommu_init(void)
+{
+ struct kmem_cache *p;
+ const unsigned long flags = SLAB_HWCACHE_ALIGN;
+ size_t align = 1 << 10; /* L2 pagetable alignement */
+
+ p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags,
+ iopte_cachep_ctor);
+ if (!p)
+ return -ENOMEM;
+ iopte_cachep = p;
+
+ return platform_driver_register(&omap_iommu_driver);
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+ kmem_cache_destroy(iopte_cachep);
+
+ platform_driver_unregister(&omap_iommu_driver);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives");
+MODULE_ALIAS("platform:omap-iommu");
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
new file mode 100644
index 0000000..37dac43
--- /dev/null
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -0,0 +1,72 @@
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+#define IOPGD_SHIFT 20
+#define IOPGD_SIZE (1 << IOPGD_SHIFT)
+#define IOPGD_MASK (~(IOPGD_SIZE - 1))
+#define IOSECTION_MASK IOPGD_MASK
+#define PTRS_PER_IOPGD (1 << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32))
+
+#define IOSUPER_SIZE (IOPGD_SIZE << 4)
+#define IOSUPER_MASK (~(IOSUPER_SIZE - 1))
+
+#define IOPTE_SHIFT 12
+#define IOPTE_SIZE (1 << IOPTE_SHIFT)
+#define IOPTE_MASK (~(IOPTE_SIZE - 1))
+#define IOPAGE_MASK IOPTE_MASK
+#define PTRS_PER_IOPTE (1 << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOLARGE_SIZE (IOPTE_SIZE << 4)
+#define IOLARGE_MASK (~(IOLARGE_SIZE - 1))
+
+#define IOPGD_TABLE (1 << 0)
+#define IOPGD_SECTION (2 << 0)
+#define IOPGD_SUPER (1 << 18 | 2 << 0)
+
+#define IOPTE_SMALL (2 << 0)
+#define IOPTE_LARGE (1 << 0)
+
+#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da))
+
+#define iopte_paddr(iopgd) (*iopgd & ~((1 << 10) - 1))
+#define iopte_vaddr(iopgd) ((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+
+#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da) (iopte_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+ u32 flags)
+{
+ memset(e, 0, sizeof(*e));
+
+ e->da = da;
+ e->pa = pa;
+ e->valid = 1;
+ /* FIXME: add OMAP1 support */
+ e->pgsz = flags & MMU_CAM_PGSZ_MASK;
+ e->endian = flags & MMU_RAM_ENDIAN_MASK;
+ e->elsz = flags & MMU_RAM_ELSZ_MASK;
+ e->mixed = flags & MMU_RAM_MIXED_MASK;
+
+ return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev) \
+ (struct iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
new file mode 100644
index 0000000..2fce2c1
--- /dev/null
+++ b/arch/arm/plat-omap/iovmm.c
@@ -0,0 +1,896 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+/*
+ * A device driver needs to create address mappings between:
+ *
+ * - iommu/device address
+ * - physical address
+ * - mpu virtual address
+ *
+ * There are 4 possible patterns for them:
+ *
+ * |iova/ mapping iommu_ page
+ * | da pa va (d)-(p)-(v) function type
+ * ---------------------------------------------------------------------------
+ * 1 | c c c 1 - 1 - 1 _kmap() / _kunmap() s
+ * 2 | c c,a c 1 - 1 - 1 _kmalloc()/ _kfree() s
+ * 3 | c d c 1 - n - 1 _vmap() / _vunmap() s
+ * 4 | c d,a c 1 - n - 1 _vmalloc()/ _vfree() n*
+ *
+ *
+ * 'iova': device iommu virtual address
+ * 'da': alias of 'iova'
+ * 'pa': physical address
+ * 'va': mpu virtual address
+ *
+ * 'c': contiguous memory area
+ * 'd': dicontiguous memory area
+ * 'a': anonymous memory allocation
+ * '()': optional feature
+ *
+ * 'n': a normal page(4KB) size is used.
+ * 's': multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.
+ *
+ * '*': not yet, but feasible.
+ */
+
+static struct kmem_cache *iovm_area_cachep;
+
+/* return total bytes of sg buffers */
+static size_t sgtable_len(const struct sg_table *sgt)
+{
+ unsigned int i, total = 0;
+ struct scatterlist *sg;
+
+ if (!sgt)
+ return 0;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+
+ bytes = sg_dma_len(sg);
+
+ if (!iopgsz_ok(bytes)) {
+ pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
+ __func__, i, bytes);
+ return 0;
+ }
+
+ total += bytes;
+ }
+
+ return total;
+}
+#define sgtable_ok(x) (!!sgtable_len(x))
+
+/*
+ * calculate the optimal number sg elements from total bytes based on
+ * iommu superpages
+ */
+static unsigned int sgtable_nents(size_t bytes)
+{
+ int i;
+ unsigned int nr_entries;
+ const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+
+ if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
+ pr_err("%s: wrong size %08x\n", __func__, bytes);
+ return 0;
+ }
+
+ nr_entries = 0;
+ for (i = 0; i < ARRAY_SIZE(pagesize); i++) {
+ if (bytes >= pagesize[i]) {
+ nr_entries += (bytes / pagesize[i]);
+ bytes %= pagesize[i];
+ }
+ }
+ BUG_ON(bytes);
+
+ return nr_entries;
+}
+
+/* allocate and initialize sg_table header(a kind of 'superblock') */
+static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
+{
+ unsigned int nr_entries;
+ int err;
+ struct sg_table *sgt;
+
+ if (!bytes)
+ return ERR_PTR(-EINVAL);
+
+ if (!IS_ALIGNED(bytes, PAGE_SIZE))
+ return ERR_PTR(-EINVAL);
+
+ /* FIXME: IOVMF_DA_FIXED should support 'superpages' */
+ if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) {
+ nr_entries = sgtable_nents(bytes);
+ if (!nr_entries)
+ return ERR_PTR(-EINVAL);
+ } else
+ nr_entries = bytes / PAGE_SIZE;
+
+ sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
+ if (!sgt)
+ return ERR_PTR(-ENOMEM);
+
+ err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
+ if (err)
+ return ERR_PTR(err);
+
+ pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
+
+ return sgt;
+}
+
+/* free sg_table header(a kind of superblock) */
+static void sgtable_free(struct sg_table *sgt)
+{
+ if (!sgt)
+ return;
+
+ sg_free_table(sgt);
+ kfree(sgt);
+
+ pr_debug("%s: sgt:%p\n", __func__, sgt);
+}
+
+/* map 'sglist' to a contiguous mpu virtual area and return 'va' */
+static void *vmap_sg(const struct sg_table *sgt)
+{
+ u32 va;
+ size_t total;
+ unsigned int i;
+ struct scatterlist *sg;
+ struct vm_struct *new;
+ const struct mem_type *mtype;
+
+ mtype = get_mem_type(MT_DEVICE);
+ if (!mtype)
+ return ERR_PTR(-EINVAL);
+
+ total = sgtable_len(sgt);
+ if (!total)
+ return ERR_PTR(-EINVAL);
+
+ new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END);
+ if (!new)
+ return ERR_PTR(-ENOMEM);
+ va = (u32)new->addr;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+ u32 pa;
+ int err;
+
+ pa = sg_phys(sg);
+ bytes = sg_dma_len(sg);
+
+ BUG_ON(bytes != PAGE_SIZE);
+
+ err = ioremap_page(va, pa, mtype);
+ if (err)
+ goto err_out;
+
+ va += bytes;
+ }
+
+ flush_cache_vmap(new->addr, total);
+ return new->addr;
+
+err_out:
+ WARN_ON(1); /* FIXME: cleanup some mpu mappings */
+ vunmap(new->addr);
+ return ERR_PTR(-EAGAIN);
+}
+
+static inline void vunmap_sg(const void *va)
+{
+ vunmap(va);
+}
+
+static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da)
+{
+ struct iovm_struct *tmp;
+
+ list_for_each_entry(tmp, &obj->mmap, list) {
+ if ((da >= tmp->da_start) && (da < tmp->da_end)) {
+ size_t len;
+
+ len = tmp->da_end - tmp->da_start;
+
+ dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n",
+ __func__, tmp->da_start, da, tmp->da_end, len,
+ tmp->flags);
+
+ return tmp;
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * find_iovm_area - find iovma which includes @da
+ * @da: iommu device virtual address
+ *
+ * Find the existing iovma starting at @da
+ */
+struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da)
+{
+ struct iovm_struct *area;
+
+ mutex_lock(&obj->mmap_lock);
+ area = __find_iovm_area(obj, da);
+ mutex_unlock(&obj->mmap_lock);
+
+ return area;
+}
+EXPORT_SYMBOL_GPL(find_iovm_area);
+
+/*
+ * This finds the hole(area) which fits the requested address and len
+ * in iovmas mmap, and returns the new allocated iovma.
+ */
+static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
+ size_t bytes, u32 flags)
+{
+ struct iovm_struct *new, *tmp;
+ u32 start, prev_end, alignement;
+
+ if (!obj || !bytes)
+ return ERR_PTR(-EINVAL);
+
+ start = da;
+ alignement = PAGE_SIZE;
+
+ if (flags & IOVMF_DA_ANON) {
+ /*
+ * Reserve the first page for NULL
+ */
+ start = PAGE_SIZE;
+ if (flags & IOVMF_LINEAR)
+ alignement = iopgsz_max(bytes);
+ start = roundup(start, alignement);
+ }
+
+ tmp = NULL;
+ if (list_empty(&obj->mmap))
+ goto found;
+
+ prev_end = 0;
+ list_for_each_entry(tmp, &obj->mmap, list) {
+
+ if ((prev_end <= start) && (start + bytes < tmp->da_start))
+ goto found;
+
+ if (flags & IOVMF_DA_ANON)
+ start = roundup(tmp->da_end, alignement);
+
+ prev_end = tmp->da_end;
+ }
+
+ if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+ goto found;
+
+ dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
+ __func__, da, bytes, flags);
+
+ return ERR_PTR(-EINVAL);
+
+found:
+ new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL);
+ if (!new)
+ return ERR_PTR(-ENOMEM);
+
+ new->iommu = obj;
+ new->da_start = start;
+ new->da_end = start + bytes;
+ new->flags = flags;
+
+ /*
+ * keep ascending order of iovmas
+ */
+ if (tmp)
+ list_add_tail(&new->list, &tmp->list);
+ else
+ list_add(&new->list, &obj->mmap);
+
+ dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n",
+ __func__, new->da_start, start, new->da_end, bytes, flags);
+
+ return new;
+}
+
+static void free_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+ size_t bytes;
+
+ BUG_ON(!obj || !area);
+
+ bytes = area->da_end - area->da_start;
+
+ dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n",
+ __func__, area->da_start, area->da_end, bytes, area->flags);
+
+ list_del(&area->list);
+ kmem_cache_free(iovm_area_cachep, area);
+}
+
+/**
+ * da_to_va - convert (d) to (v)
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ * @va: mpu virtual address
+ *
+ * Returns mpu virtual addr which corresponds to a given device virtual addr
+ */
+void *da_to_va(struct iommu *obj, u32 da)
+{
+ void *va = NULL;
+ struct iovm_struct *area;
+
+ mutex_lock(&obj->mmap_lock);
+
+ area = __find_iovm_area(obj, da);
+ if (!area) {
+ dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+ goto out;
+ }
+ va = area->va;
+ mutex_unlock(&obj->mmap_lock);
+out:
+ return va;
+}
+EXPORT_SYMBOL_GPL(da_to_va);
+
+static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
+{
+ unsigned int i;
+ struct scatterlist *sg;
+ void *va = _va;
+ void *va_end;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ struct page *pg;
+ const size_t bytes = PAGE_SIZE;
+
+ /*
+ * iommu 'superpage' isn't supported with 'iommu_vmalloc()'
+ */
+ pg = vmalloc_to_page(va);
+ BUG_ON(!pg);
+ sg_set_page(sg, pg, bytes, 0);
+
+ va += bytes;
+ }
+
+ va_end = _va + PAGE_SIZE * i;
+ flush_cache_vmap(_va, va_end);
+}
+
+static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
+{
+ /*
+ * Actually this is not necessary at all, just exists for
+ * consistency of the code readibility.
+ */
+ BUG_ON(!sgt);
+}
+
+static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
+{
+ unsigned int i;
+ struct scatterlist *sg;
+ void *va;
+
+ va = phys_to_virt(pa);
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+
+ bytes = iopgsz_max(len);
+
+ BUG_ON(!iopgsz_ok(bytes));
+
+ sg_set_buf(sg, phys_to_virt(pa), bytes);
+ /*
+ * 'pa' is cotinuous(linear).
+ */
+ pa += bytes;
+ len -= bytes;
+ }
+ BUG_ON(len);
+
+ clean_dcache_area(va, len);
+}
+
+static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
+{
+ /*
+ * Actually this is not necessary at all, just exists for
+ * consistency of the code readibility
+ */
+ BUG_ON(!sgt);
+}
+
+/* create 'da' <-> 'pa' mapping from 'sgt' */
+static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
+ const struct sg_table *sgt, u32 flags)
+{
+ int err;
+ unsigned int i, j;
+ struct scatterlist *sg;
+ u32 da = new->da_start;
+
+ if (!obj || !new || !sgt)
+ return -EINVAL;
+
+ BUG_ON(!sgtable_ok(sgt));
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ u32 pa;
+ int pgsz;
+ size_t bytes;
+ struct iotlb_entry e;
+
+ pa = sg_phys(sg);
+ bytes = sg_dma_len(sg);
+
+ flags &= ~IOVMF_PGSZ_MASK;
+ pgsz = bytes_to_iopgsz(bytes);
+ if (pgsz < 0)
+ goto err_out;
+ flags |= pgsz;
+
+ pr_debug("%s: [%d] %08x %08x(%x)\n", __func__,
+ i, da, pa, bytes);
+
+ iotlb_init_entry(&e, da, pa, flags);
+ err = iopgtable_store_entry(obj, &e);
+ if (err)
+ goto err_out;
+
+ da += bytes;
+ }
+ return 0;
+
+err_out:
+ da = new->da_start;
+
+ for_each_sg(sgt->sgl, sg, i, j) {
+ size_t bytes;
+
+ bytes = iopgtable_clear_entry(obj, da);
+
+ BUG_ON(!iopgsz_ok(bytes));
+
+ da += bytes;
+ }
+ return err;
+}
+
+/* release 'da' <-> 'pa' mapping */
+static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+ u32 start;
+ size_t total = area->da_end - area->da_start;
+
+ BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE));
+
+ start = area->da_start;
+ while (total > 0) {
+ size_t bytes;
+
+ bytes = iopgtable_clear_entry(obj, start);
+ if (bytes == 0)
+ bytes = PAGE_SIZE;
+ else
+ dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n",
+ __func__, start, bytes, area->flags);
+
+ BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE));
+
+ total -= bytes;
+ start += bytes;
+ }
+ BUG_ON(total);
+}
+
+/* template function for all unmapping */
+static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da,
+ void (*fn)(const void *), u32 flags)
+{
+ struct sg_table *sgt = NULL;
+ struct iovm_struct *area;
+
+ if (!IS_ALIGNED(da, PAGE_SIZE)) {
+ dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da);
+ return NULL;
+ }
+
+ mutex_lock(&obj->mmap_lock);
+
+ area = __find_iovm_area(obj, da);
+ if (!area) {
+ dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+ goto out;
+ }
+
+ if ((area->flags & flags) != flags) {
+ dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__,
+ area->flags);
+ goto out;
+ }
+ sgt = (struct sg_table *)area->sgt;
+
+ unmap_iovm_area(obj, area);
+
+ fn(area->va);
+
+ dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__,
+ area->da_start, da, area->da_end,
+ area->da_end - area->da_start, area->flags);
+
+ free_iovm_area(obj, area);
+out:
+ mutex_unlock(&obj->mmap_lock);
+
+ return sgt;
+}
+
+static u32 map_iommu_region(struct iommu *obj, u32 da,
+ const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+ int err = -ENOMEM;
+ struct iovm_struct *new;
+
+ mutex_lock(&obj->mmap_lock);
+
+ new = alloc_iovm_area(obj, da, bytes, flags);
+ if (IS_ERR(new)) {
+ err = PTR_ERR(new);
+ goto err_alloc_iovma;
+ }
+ new->va = va;
+ new->sgt = sgt;
+
+ if (map_iovm_area(obj, new, sgt, new->flags))
+ goto err_map;
+
+ mutex_unlock(&obj->mmap_lock);
+
+ dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n",
+ __func__, new->da_start, bytes, new->flags, va);
+
+ return new->da_start;
+
+err_map:
+ free_iovm_area(obj, new);
+err_alloc_iovma:
+ mutex_unlock(&obj->mmap_lock);
+ return err;
+}
+
+static inline u32 __iommu_vmap(struct iommu *obj, u32 da,
+ const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+ return map_iommu_region(obj, da, sgt, va, bytes, flags);
+}
+
+/**
+ * iommu_vmap - (d)-(p)-(v) address mapper
+ * @obj: objective iommu
+ * @sgt: address of scatter gather table
+ * @flags: iovma and page property
+ *
+ * Creates 1-n-1 mapping with given @sgt and returns @da.
+ * All @sgt element must be io page size aligned.
+ */
+u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
+ u32 flags)
+{
+ size_t bytes;
+ void *va;
+
+ if (!obj || !obj->dev || !sgt)
+ return -EINVAL;
+
+ bytes = sgtable_len(sgt);
+ if (!bytes)
+ return -EINVAL;
+ bytes = PAGE_ALIGN(bytes);
+
+ va = vmap_sg(sgt);
+ if (IS_ERR(va))
+ return PTR_ERR(va);
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_DISCONT;
+ flags |= IOVMF_MMIO;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ vunmap_sg(va);
+
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmap);
+
+/**
+ * iommu_vunmap - release virtual mapping obtained by 'iommu_vmap()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Free the iommu virtually contiguous memory area starting at
+ * @da, which was returned by 'iommu_vmap()'.
+ */
+struct sg_table *iommu_vunmap(struct iommu *obj, u32 da)
+{
+ struct sg_table *sgt;
+ /*
+ * 'sgt' is allocated before 'iommu_vmalloc()' is called.
+ * Just returns 'sgt' to the caller to free
+ */
+ sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ return sgt;
+}
+EXPORT_SYMBOL_GPL(iommu_vunmap);
+
+/**
+ * iommu_vmalloc - (d)-(p)-(v) address allocator and mapper
+ * @obj: objective iommu
+ * @da: contiguous iommu virtual memory
+ * @bytes: allocation size
+ * @flags: iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-n-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+ void *va;
+ struct sg_table *sgt;
+
+ if (!obj || !obj->dev || !bytes)
+ return -EINVAL;
+
+ bytes = PAGE_ALIGN(bytes);
+
+ va = vmalloc(bytes);
+ if (!va)
+ return -ENOMEM;
+
+ sgt = sgtable_alloc(bytes, flags);
+ if (IS_ERR(sgt)) {
+ da = PTR_ERR(sgt);
+ goto err_sgt_alloc;
+ }
+ sgtable_fill_vmalloc(sgt, va);
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_DISCONT;
+ flags |= IOVMF_ALLOC;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ goto err_iommu_vmap;
+
+ return da;
+
+err_iommu_vmap:
+ sgtable_drain_vmalloc(sgt);
+ sgtable_free(sgt);
+err_sgt_alloc:
+ vfree(va);
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmalloc);
+
+/**
+ * iommu_vfree - release memory allocated by 'iommu_vmalloc()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Frees the iommu virtually continuous memory area starting at
+ * @da, as obtained from 'iommu_vmalloc()'.
+ */
+void iommu_vfree(struct iommu *obj, const u32 da)
+{
+ struct sg_table *sgt;
+
+ sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_vfree);
+
+static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
+ size_t bytes, u32 flags)
+{
+ struct sg_table *sgt;
+
+ sgt = sgtable_alloc(bytes, flags);
+ if (IS_ERR(sgt))
+ return PTR_ERR(sgt);
+
+ sgtable_fill_kmalloc(sgt, pa, bytes);
+
+ da = map_iommu_region(obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da)) {
+ sgtable_drain_kmalloc(sgt);
+ sgtable_free(sgt);
+ }
+
+ return da;
+}
+
+/**
+ * iommu_kmap - (d)-(p)-(v) address mapper
+ * @obj: objective iommu
+ * @da: contiguous iommu virtual memory
+ * @pa: contiguous physical memory
+ * @flags: iovma and page property
+ *
+ * Creates 1-1-1 mapping and returns @da again, which can be
+ * adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+ u32 flags)
+{
+ void *va;
+
+ if (!obj || !obj->dev || !bytes)
+ return -EINVAL;
+
+ bytes = PAGE_ALIGN(bytes);
+
+ va = ioremap(pa, bytes);
+ if (!va)
+ return -ENOMEM;
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_LINEAR;
+ flags |= IOVMF_MMIO;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ iounmap(va);
+
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmap);
+
+/**
+ * iommu_kunmap - release virtual mapping obtained by 'iommu_kmap()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmap()'.
+ */
+void iommu_kunmap(struct iommu *obj, u32 da)
+{
+ struct sg_table *sgt;
+ typedef void (*func_t)(const void *);
+
+ sgt = unmap_vm_area(obj, da, (func_t)__iounmap,
+ IOVMF_LINEAR | IOVMF_MMIO);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kunmap);
+
+/**
+ * iommu_kmalloc - (d)-(p)-(v) address allocator and mapper
+ * @obj: objective iommu
+ * @da: contiguous iommu virtual memory
+ * @bytes: bytes for allocation
+ * @flags: iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-1-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+ void *va;
+ u32 pa;
+
+ if (!obj || !obj->dev || !bytes)
+ return -EINVAL;
+
+ bytes = PAGE_ALIGN(bytes);
+
+ va = kmalloc(bytes, GFP_KERNEL | GFP_DMA);
+ if (!va)
+ return -ENOMEM;
+ pa = virt_to_phys(va);
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_LINEAR;
+ flags |= IOVMF_ALLOC;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ kfree(va);
+
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmalloc);
+
+/**
+ * iommu_kfree - release virtual mapping obtained by 'iommu_kmalloc()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmalloc()'.
+ */
+void iommu_kfree(struct iommu *obj, u32 da)
+{
+ struct sg_table *sgt;
+
+ sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kfree);
+
+
+static int __init iovmm_init(void)
+{
+ const unsigned long flags = SLAB_HWCACHE_ALIGN;
+ struct kmem_cache *p;
+
+ p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0,
+ flags, NULL);
+ if (!p)
+ return -ENOMEM;
+ iovm_area_cachep = p;
+
+ return 0;
+}
+module_init(iovmm_init);
+
+static void __exit iovmm_exit(void)
+{
+ kmem_cache_destroy(iovm_area_cachep);
+}
+module_exit(iovmm_exit);
+
+MODULE_DESCRIPTION("omap iommu: simple virtual address space management");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 28b0a82..efa0e01 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -91,11 +91,20 @@
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_tx = dev_id;
+ u16 irqst_spcr2;
- dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+ irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+ dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
- complete(&mcbsp_tx->tx_irq_completion);
+ if (irqst_spcr2 & XSYNC_ERR) {
+ dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
+ irqst_spcr2);
+ /* Writing zero to XSYNC_ERR clears the IRQ */
+ OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
+ irqst_spcr2 & ~(XSYNC_ERR));
+ } else {
+ complete(&mcbsp_tx->tx_irq_completion);
+ }
return IRQ_HANDLED;
}
@@ -103,11 +112,20 @@
static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_rx = dev_id;
+ u16 irqst_spcr1;
- dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+ irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+ dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
- complete(&mcbsp_rx->rx_irq_completion);
+ if (irqst_spcr1 & RSYNC_ERR) {
+ dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
+ irqst_spcr1);
+ /* Writing zero to RSYNC_ERR clears the IRQ */
+ OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
+ irqst_spcr1 & ~(RSYNC_ERR));
+ } else {
+ complete(&mcbsp_rx->tx_irq_completion);
+ }
return IRQ_HANDLED;
}
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 80b040f..8d329fb 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,6 +54,9 @@
{
struct pin_config *reg;
+ if (cpu_is_omap44xx())
+ return 0;
+
if (mux_cfg == NULL) {
printk(KERN_ERR "Pin mux table not initialized\n");
return -ENODEV;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index fa5297d..a5b9bcd 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,6 +6,9 @@
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -38,12 +41,14 @@
#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PA 0x40200000
#define OMAP2_SRAM_PUB_PA 0x4020f800
-#define OMAP2_SRAM_VA VMALLOC_END
-#define OMAP2_SRAM_PUB_VA (VMALLOC_END + 0x800)
+#define OMAP2_SRAM_VA 0xe3000000
+#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
#define OMAP3_SRAM_PA 0x40200000
#define OMAP3_SRAM_VA 0xd7000000
#define OMAP3_SRAM_PUB_PA 0x40208000
#define OMAP3_SRAM_PUB_VA 0xd7008000
+#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
+#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -87,6 +92,10 @@
{
int type = 0;
+ if (cpu_is_omap44xx())
+ /* Not yet supported */
+ return 0;
+
if (cpu_is_omap242x())
type = omap_rev() & OMAP2_DEVICETYPE_MASK;
@@ -135,6 +144,10 @@
omap_sram_base = OMAP3_SRAM_VA;
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_base = OMAP4_SRAM_VA;
+ omap_sram_start = OMAP4_SRAM_PA;
+ omap_sram_size = 0x8000; /* 32K */
} else {
omap_sram_base = OMAP2_SRAM_VA;
omap_sram_start = OMAP2_SRAM_PA;
@@ -201,8 +214,23 @@
base = OMAP3_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+
+ /*
+ * SRAM must be marked as non-cached on OMAP3 since the
+ * CORE DPLL M2 divider change code (in SRAM) runs with the
+ * SDRAM controller disabled, and if it is marked cached,
+ * the ARM may attempt to write cache lines back to SDRAM
+ * which will cause the system to hang.
+ */
+ omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
}
+ if (cpu_is_omap44xx()) {
+ omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
+ base = OMAP4_SRAM_PA;
+ base = ROUND_DOWN(base, PAGE_SIZE);
+ omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+ }
omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
@@ -242,20 +270,13 @@
return (void *)omap_sram_ceil;
}
-static void omap_sram_error(void)
-{
- panic("Uninitialized SRAM function\n");
-}
-
#ifdef CONFIG_ARCH_OMAP1
static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
{
- if (!_omap_sram_reprogram_clock)
- omap_sram_error();
-
+ BUG_ON(!_omap_sram_reprogram_clock);
_omap_sram_reprogram_clock(dpllctl, ckctl);
}
@@ -280,9 +301,7 @@
void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock)
{
- if (!_omap2_sram_ddr_init)
- omap_sram_error();
-
+ BUG_ON(!_omap2_sram_ddr_init);
_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
base_cs, force_unlock);
}
@@ -292,9 +311,7 @@
void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
{
- if (!_omap2_sram_reprogram_sdrc)
- omap_sram_error();
-
+ BUG_ON(!_omap2_sram_reprogram_sdrc);
_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
}
@@ -302,9 +319,7 @@
u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
{
- if (!_omap2_set_prcm)
- omap_sram_error();
-
+ BUG_ON(!_omap2_set_prcm);
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
}
#endif
@@ -356,16 +371,15 @@
static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb,
- u32 m2);
+ u32 m2, u32 unlock_dll);
u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2)
+ u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
{
- if (!_omap3_sram_configure_core_dpll)
- omap_sram_error();
-
+ BUG_ON(!_omap3_sram_configure_core_dpll);
return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
sdrc_actim_ctrla,
- sdrc_actim_ctrlb, m2);
+ sdrc_actim_ctrlb, m2,
+ unlock_dll);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -406,6 +420,8 @@
omap243x_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
+ else if (cpu_is_omap44xx())
+ omap34xx_sram_init(); /* FIXME: */
return 0;
}
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 9120717..2aa1908 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -535,6 +535,15 @@
If unsure, say N.
+config PATA_PALMLD
+ tristate "Palm LifeDrive PATA support"
+ depends on MACH_PALMLD
+ help
+ This option enables support for Palm LifeDrive's internal ATA
+ port via the new ATA layer.
+
+ If unsure, say N.
+
config PATA_PCMCIA
tristate "PCMCIA PATA support"
depends on PCMCIA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 7f1ecf9..1558059 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -50,6 +50,7 @@
obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o
+obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
new file mode 100644
index 0000000..11fb4cc
--- /dev/null
+++ b/drivers/ata/pata_palmld.c
@@ -0,0 +1,150 @@
+/*
+ * drivers/ata/pata_palmld.c
+ *
+ * Driver for IDE channel in Palm LifeDrive
+ *
+ * Based on research of:
+ * Alex Osborne <ato@meshy.org>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Rewritten version based on pata_ixp4xx_cf.c:
+ * ixp4xx PATA/Compact Flash driver
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <scsi/scsi_host.h>
+#include <mach/palmld.h>
+
+#define DRV_NAME "pata_palmld"
+
+static struct scsi_host_template palmld_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations palmld_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
+ .cable_detect = ata_cable_40wire,
+};
+
+static __devinit int palmld_pata_probe(struct platform_device *pdev)
+{
+ struct ata_host *host;
+ struct ata_port *ap;
+ void __iomem *mem;
+ int ret;
+
+ /* allocate host */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ /* remap drive's physical memory address */
+ mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
+ if (!mem)
+ return -ENOMEM;
+
+ /* request and activate power GPIO, IRQ GPIO */
+ ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
+ if (ret)
+ goto err3;
+
+ /* reset the drive */
+ gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
+ msleep(30);
+ gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1);
+ msleep(30);
+
+ /* setup the ata port */
+ ap = host->ports[0];
+ ap->ops = &palmld_port_ops;
+ ap->pio_mask = ATA_PIO4;
+ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING;
+
+ /* memory mapping voodoo */
+ ap->ioaddr.cmd_addr = mem + 0x10;
+ ap->ioaddr.altstatus_addr = mem + 0xe;
+ ap->ioaddr.ctl_addr = mem + 0xe;
+
+ /* start the port */
+ ata_sff_std_ports(&ap->ioaddr);
+
+ /* activate host */
+ return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+ &palmld_sht);
+
+err3:
+ gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+err2:
+ gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+err1:
+ return ret;
+}
+
+static __devexit int palmld_pata_remove(struct platform_device *dev)
+{
+ struct ata_host *host = platform_get_drvdata(dev);
+
+ ata_host_detach(host);
+
+ /* power down the HDD */
+ gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
+
+ gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+ gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+
+ return 0;
+}
+
+static struct platform_driver palmld_pata_platform_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = palmld_pata_probe,
+ .remove = __devexit_p(palmld_pata_remove),
+};
+
+static int __init palmld_pata_init(void)
+{
+ return platform_driver_register(&palmld_pata_platform_driver);
+}
+
+static void __exit palmld_pata_exit(void)
+{
+ platform_driver_unregister(&palmld_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PalmLD PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(palmld_pata_init);
+module_exit(palmld_pata_exit);
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 5fab647..26c93c7 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -148,3 +148,15 @@
To compile this driver as a module, choose M here: the
module will be called virtio-rng. If unsure, say N.
+
+config HW_RANDOM_MXC_RNGA
+ tristate "Freescale i.MX RNGA Random Number Generator"
+ depends on HW_RANDOM && ARCH_HAS_RNGA
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Freescale i.MX processors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mxc-rnga.
+
+ If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index e81d21a..fd1ecd2 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -15,3 +15,4 @@
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
diff --git a/drivers/char/hw_random/mxc-rnga.c b/drivers/char/hw_random/mxc-rnga.c
new file mode 100644
index 0000000..187c6be
--- /dev/null
+++ b/drivers/char/hw_random/mxc-rnga.c
@@ -0,0 +1,247 @@
+/*
+ * RNG driver for Freescale RNGA
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Author: Alan Carvalho de Assis <acassis@gmail.com>
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This driver is based on other RNG drivers.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+/* RNGA Registers */
+#define RNGA_CONTROL 0x00
+#define RNGA_STATUS 0x04
+#define RNGA_ENTROPY 0x08
+#define RNGA_OUTPUT_FIFO 0x0c
+#define RNGA_MODE 0x10
+#define RNGA_VERIFICATION_CONTROL 0x14
+#define RNGA_OSC_CONTROL_COUNTER 0x18
+#define RNGA_OSC1_COUNTER 0x1c
+#define RNGA_OSC2_COUNTER 0x20
+#define RNGA_OSC_COUNTER_STATUS 0x24
+
+/* RNGA Registers Range */
+#define RNG_ADDR_RANGE 0x28
+
+/* RNGA Control Register */
+#define RNGA_CONTROL_SLEEP 0x00000010
+#define RNGA_CONTROL_CLEAR_INT 0x00000008
+#define RNGA_CONTROL_MASK_INTS 0x00000004
+#define RNGA_CONTROL_HIGH_ASSURANCE 0x00000002
+#define RNGA_CONTROL_GO 0x00000001
+
+#define RNGA_STATUS_LEVEL_MASK 0x0000ff00
+
+/* RNGA Status Register */
+#define RNGA_STATUS_OSC_DEAD 0x80000000
+#define RNGA_STATUS_SLEEP 0x00000010
+#define RNGA_STATUS_ERROR_INT 0x00000008
+#define RNGA_STATUS_FIFO_UNDERFLOW 0x00000004
+#define RNGA_STATUS_LAST_READ_STATUS 0x00000002
+#define RNGA_STATUS_SECURITY_VIOLATION 0x00000001
+
+static struct platform_device *rng_dev;
+
+static int mxc_rnga_data_present(struct hwrng *rng)
+{
+ int level;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* how many random numbers is in FIFO? [0-16] */
+ level = ((__raw_readl(rng_base + RNGA_STATUS) &
+ RNGA_STATUS_LEVEL_MASK) >> 8);
+
+ return level > 0 ? 1 : 0;
+}
+
+static int mxc_rnga_data_read(struct hwrng *rng, u32 * data)
+{
+ int err;
+ u32 ctrl;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* retrieve a random number from FIFO */
+ *data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO);
+
+ /* some error while reading this random number? */
+ err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT;
+
+ /* if error: clear error interrupt, but doesn't return random number */
+ if (err) {
+ dev_dbg(&rng_dev->dev, "Error while reading random number!\n");
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT,
+ rng_base + RNGA_CONTROL);
+ return 0;
+ } else
+ return 4;
+}
+
+static int mxc_rnga_init(struct hwrng *rng)
+{
+ u32 ctrl, osc;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* wake up */
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL);
+
+ /* verify if oscillator is working */
+ osc = __raw_readl(rng_base + RNGA_STATUS);
+ if (osc & RNGA_STATUS_OSC_DEAD) {
+ dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n");
+ return -ENODEV;
+ }
+
+ /* go running */
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+
+ return 0;
+}
+
+static void mxc_rnga_cleanup(struct hwrng *rng)
+{
+ u32 ctrl;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+
+ /* stop rnga */
+ __raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+}
+
+static struct hwrng mxc_rnga = {
+ .name = "mxc-rnga",
+ .init = mxc_rnga_init,
+ .cleanup = mxc_rnga_cleanup,
+ .data_present = mxc_rnga_data_present,
+ .data_read = mxc_rnga_data_read
+};
+
+static int __init mxc_rnga_probe(struct platform_device *pdev)
+{
+ int err = -ENODEV;
+ struct clk *clk;
+ struct resource *res, *mem;
+ void __iomem *rng_base = NULL;
+
+ if (rng_dev)
+ return -EBUSY;
+
+ clk = clk_get(&pdev->dev, "rng");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Could not get rng_clk!\n");
+ err = PTR_ERR(clk);
+ goto out;
+ }
+
+ clk_enable(clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ err = -ENOENT;
+ goto err_region;
+ }
+
+ mem = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (mem == NULL) {
+ err = -EBUSY;
+ goto err_region;
+ }
+
+ rng_base = ioremap(res->start, resource_size(res));
+ if (!rng_base) {
+ err = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ mxc_rnga.priv = (unsigned long)rng_base;
+
+ err = hwrng_register(&mxc_rnga);
+ if (err) {
+ dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err);
+ goto err_register;
+ }
+
+ rng_dev = pdev;
+
+ dev_info(&pdev->dev, "MXC RNGA Registered.\n");
+
+ return 0;
+
+err_register:
+ iounmap(rng_base);
+ rng_base = NULL;
+
+err_ioremap:
+ release_mem_region(res->start, resource_size(res));
+
+err_region:
+ clk_disable(clk);
+ clk_put(clk);
+
+out:
+ return err;
+}
+
+static int __exit mxc_rnga_remove(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ void __iomem *rng_base = (void __iomem *)mxc_rnga.priv;
+ struct clk *clk = clk_get(&pdev->dev, "rng");
+
+ hwrng_unregister(&mxc_rnga);
+
+ iounmap(rng_base);
+
+ release_mem_region(res->start, resource_size(res));
+
+ clk_disable(clk);
+ clk_put(clk);
+
+ return 0;
+}
+
+static struct platform_driver mxc_rnga_driver = {
+ .driver = {
+ .name = "mxc_rnga",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(mxc_rnga_remove),
+};
+
+static int __init mod_init(void)
+{
+ return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe);
+}
+
+static void __exit mod_exit(void)
+{
+ platform_driver_unregister(&mxc_rnga_driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("H/W RNGA driver for i.MX");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9d48da2..57835f5 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -758,10 +758,14 @@
---help---
This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
+config MX3_VIDEO
+ bool
+
config VIDEO_MX3
tristate "i.MX3x Camera Sensor Interface driver"
depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
+ select MX3_VIDEO
---help---
This is a v4l2 driver for the i.MX3x Camera Sensor Interface
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index b4cf691..3eb87bd 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -155,7 +155,7 @@
config MMC_IMX
tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
+ depends on ARCH_MX1
help
This selects the Motorola i.MX Multimedia card Interface.
If you have a i.MX platform with a Multimedia Card slot,
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index e62a22a..2f19c63 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1073,7 +1073,6 @@
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
- mmc->ocr_avail = mmc_slot(host).ocr_mask;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
if (pdata->slots[host->slot_id].wires >= 8)
@@ -1110,13 +1109,14 @@
goto err_irq;
}
+ /* initialize power supplies, gpios, etc */
if (pdata->init != NULL) {
if (pdata->init(&pdev->dev) != 0) {
- dev_dbg(mmc_dev(host->mmc),
- "Unable to configure MMC IRQs\n");
+ dev_dbg(mmc_dev(host->mmc), "late init error\n");
goto err_irq_cd_init;
}
}
+ mmc->ocr_avail = mmc_slot(host).ocr_mask;
/* Request IRQ for card detect */
if ((mmc_slot(host).card_detect_irq)) {
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index f2e9de1..6391e3d 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -39,7 +39,6 @@
#include <mach/gpmc.h>
#include <mach/onenand.h>
#include <mach/gpio.h>
-#include <mach/pm.h>
#include <mach/dma.h>
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index a740053..b6d1881 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -456,7 +456,8 @@
debug_desc(phys, desc);
BUG_ON(phys & 0x1F);
qmgr_put_entry(queue, phys);
- BUG_ON(qmgr_stat_overflow(queue));
+ /* Don't check for queue overflow here, we've allocated sufficient
+ length and queues >= 32 don't support this check anyway. */
}
@@ -512,8 +513,8 @@
#endif
napi_complete(napi);
qmgr_enable_irq(rxq);
- if (!qmgr_stat_empty(rxq) &&
- napi_reschedule(napi)) {
+ if (!qmgr_stat_below_low_watermark(rxq) &&
+ napi_reschedule(napi)) { /* not empty again */
#if DEBUG_RX
printk(KERN_DEBUG "%s: eth_poll"
" napi_reschedule successed\n",
@@ -630,9 +631,9 @@
port->tx_buff_tab[n_desc] = NULL;
}
- start = qmgr_stat_empty(port->plat->txreadyq);
+ start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
queue_put_desc(port->plat->txreadyq, phys, desc);
- if (start) {
+ if (start) { /* TX-ready queue was empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
port->netdev->name);
@@ -708,13 +709,14 @@
queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
dev->trans_start = jiffies;
- if (qmgr_stat_empty(txreadyq)) {
+ if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
#endif
netif_stop_queue(dev);
/* we could miss TX ready interrupt */
- if (!qmgr_stat_empty(txreadyq)) {
+ /* really empty in fact */
+ if (!qmgr_stat_below_low_watermark(txreadyq)) {
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_xmit ready again\n",
dev->name);
@@ -814,29 +816,29 @@
int err;
err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0,
- "%s:RX-free", port->netdev->name);
+ "%s:RX-free", port->netdev->name);
if (err)
return err;
err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0,
- "%s:RX", port->netdev->name);
+ "%s:RX", port->netdev->name);
if (err)
goto rel_rxfree;
err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0,
- "%s:TX", port->netdev->name);
+ "%s:TX", port->netdev->name);
if (err)
goto rel_rx;
err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0,
- "%s:TX-ready", port->netdev->name);
+ "%s:TX-ready", port->netdev->name);
if (err)
goto rel_tx;
/* TX-done queue handles skbs sent out by the NPEs */
if (!ports_open) {
err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0,
- "%s:TX-done", DRV_NAME);
+ "%s:TX-done", DRV_NAME);
if (err)
goto rel_txready;
}
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 765a7f5..a6dc317 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -579,7 +579,8 @@
debug_desc(phys, desc);
BUG_ON(phys & 0x1F);
qmgr_put_entry(queue, phys);
- BUG_ON(qmgr_stat_overflow(queue));
+ /* Don't check for queue overflow here, we've allocated sufficient
+ length and queues >= 32 don't support this check anyway. */
}
@@ -789,10 +790,10 @@
free_buffer_irq(port->tx_buff_tab[n_desc]);
port->tx_buff_tab[n_desc] = NULL;
- start = qmgr_stat_empty(port->plat->txreadyq);
+ start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
queue_put_desc(port->plat->txreadyq,
tx_desc_phys(port, n_desc), desc);
- if (start) {
+ if (start) { /* TX-ready queue was empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
" ready\n", dev->name);
@@ -867,13 +868,13 @@
queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
dev->trans_start = jiffies;
- if (qmgr_stat_empty(txreadyq)) {
+ if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
#endif
netif_stop_queue(dev);
/* we could miss TX ready interrupt */
- if (!qmgr_stat_empty(txreadyq)) {
+ if (!qmgr_stat_below_low_watermark(txreadyq)) {
#if DEBUG_TX
printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
dev->name);
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index f7a3283..551332e 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,32 +12,56 @@
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
-#define EP93XX_RTC_REG(x) (EP93XX_RTC_BASE + (x))
-#define EP93XX_RTC_DATA EP93XX_RTC_REG(0x0000)
-#define EP93XX_RTC_LOAD EP93XX_RTC_REG(0x000C)
-#define EP93XX_RTC_SWCOMP EP93XX_RTC_REG(0x0108)
+#define EP93XX_RTC_DATA 0x000
+#define EP93XX_RTC_MATCH 0x004
+#define EP93XX_RTC_STATUS 0x008
+#define EP93XX_RTC_STATUS_INTR (1<<0)
+#define EP93XX_RTC_LOAD 0x00C
+#define EP93XX_RTC_CONTROL 0x010
+#define EP93XX_RTC_CONTROL_MIE (1<<0)
+#define EP93XX_RTC_SWCOMP 0x108
+#define EP93XX_RTC_SWCOMP_DEL_MASK 0x001f0000
+#define EP93XX_RTC_SWCOMP_DEL_SHIFT 16
+#define EP93XX_RTC_SWCOMP_INT_MASK 0x0000ffff
+#define EP93XX_RTC_SWCOMP_INT_SHIFT 0
-#define DRV_VERSION "0.2"
+#define DRV_VERSION "0.3"
-static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload,
+/*
+ * struct device dev.platform_data is used to store our private data
+ * because struct rtc_device does not have a variable to hold it.
+ */
+struct ep93xx_rtc {
+ void __iomem *mmio_base;
+};
+
+static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
unsigned short *delete)
{
- unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+ unsigned long comp;
+
+ comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP);
if (preload)
- *preload = comp & 0xffff;
+ *preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK)
+ >> EP93XX_RTC_SWCOMP_INT_SHIFT;
if (delete)
- *delete = (comp >> 16) & 0x1f;
+ *delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK)
+ >> EP93XX_RTC_SWCOMP_DEL_SHIFT;
return 0;
}
static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- unsigned long time = __raw_readl(EP93XX_RTC_DATA);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+ unsigned long time;
+
+ time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA);
rtc_time_to_tm(time, tm);
return 0;
@@ -45,7 +69,9 @@
static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs)
{
- __raw_writel(secs + 1, EP93XX_RTC_LOAD);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+
+ __raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD);
return 0;
}
@@ -53,7 +79,7 @@
{
unsigned short preload, delete;
- ep93xx_get_swcomp(dev, &preload, &delete);
+ ep93xx_rtc_get_swcomp(dev, &preload, &delete);
seq_printf(seq, "preload\t\t: %d\n", preload);
seq_printf(seq, "delete\t\t: %d\n", delete);
@@ -67,54 +93,104 @@
.proc = ep93xx_rtc_proc,
};
-static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev,
struct device_attribute *attr, char *buf)
{
unsigned short preload;
- ep93xx_get_swcomp(dev, &preload, NULL);
+ ep93xx_rtc_get_swcomp(dev, &preload, NULL);
return sprintf(buf, "%d\n", preload);
}
-static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL);
+static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL);
-static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev,
struct device_attribute *attr, char *buf)
{
unsigned short delete;
- ep93xx_get_swcomp(dev, NULL, &delete);
+ ep93xx_rtc_get_swcomp(dev, NULL, &delete);
return sprintf(buf, "%d\n", delete);
}
-static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL);
+static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL);
-static int __devinit ep93xx_rtc_probe(struct platform_device *dev)
+static int __init ep93xx_rtc_probe(struct platform_device *pdev)
{
- struct rtc_device *rtc = rtc_device_register("ep93xx",
- &dev->dev, &ep93xx_rtc_ops, THIS_MODULE);
+ struct ep93xx_rtc *ep93xx_rtc;
+ struct resource *res;
+ struct rtc_device *rtc;
+ int err;
- if (IS_ERR(rtc)) {
- return PTR_ERR(rtc);
+ ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL);
+ if (ep93xx_rtc == NULL)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -ENXIO;
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (res == NULL)
+ return -EBUSY;
+
+ ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res));
+ if (ep93xx_rtc->mmio_base == NULL) {
+ err = -ENXIO;
+ goto fail;
}
- platform_set_drvdata(dev, rtc);
+ pdev->dev.platform_data = ep93xx_rtc;
- device_create_file(&dev->dev, &dev_attr_comp_preload);
- device_create_file(&dev->dev, &dev_attr_comp_delete);
+ rtc = rtc_device_register(pdev->name,
+ &pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ err = PTR_ERR(rtc);
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, rtc);
+
+ err = device_create_file(&pdev->dev, &dev_attr_comp_preload);
+ if (err)
+ goto fail;
+ err = device_create_file(&pdev->dev, &dev_attr_comp_delete);
+ if (err) {
+ device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+ goto fail;
+ }
return 0;
+
+fail:
+ if (ep93xx_rtc->mmio_base) {
+ iounmap(ep93xx_rtc->mmio_base);
+ pdev->dev.platform_data = NULL;
+ }
+ release_mem_region(res->start, resource_size(res));
+ return err;
}
-static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
+static int __exit ep93xx_rtc_remove(struct platform_device *pdev)
{
- struct rtc_device *rtc = platform_get_drvdata(dev);
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
+ struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data;
+ struct resource *res;
- if (rtc)
- rtc_device_unregister(rtc);
+ /* cleanup sysfs */
+ device_remove_file(&pdev->dev, &dev_attr_comp_delete);
+ device_remove_file(&pdev->dev, &dev_attr_comp_preload);
- platform_set_drvdata(dev, NULL);
+ rtc_device_unregister(rtc);
+
+ iounmap(ep93xx_rtc->mmio_base);
+ pdev->dev.platform_data = NULL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+
+ platform_set_drvdata(pdev, NULL);
return 0;
}
@@ -122,23 +198,22 @@
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:ep93xx-rtc");
-static struct platform_driver ep93xx_rtc_platform_driver = {
+static struct platform_driver ep93xx_rtc_driver = {
.driver = {
.name = "ep93xx-rtc",
.owner = THIS_MODULE,
},
- .probe = ep93xx_rtc_probe,
- .remove = __devexit_p(ep93xx_rtc_remove),
+ .remove = __exit_p(ep93xx_rtc_remove),
};
static int __init ep93xx_rtc_init(void)
{
- return platform_driver_register(&ep93xx_rtc_platform_driver);
+ return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe);
}
static void __exit ep93xx_rtc_exit(void)
{
- platform_driver_unregister(&ep93xx_rtc_platform_driver);
+ platform_driver_unregister(&ep93xx_rtc_driver);
}
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 88fdac5..8c5bda2 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -70,6 +70,23 @@
struct clk *clk;
unsigned int im; /* interrupt mask */
unsigned int old_status;
+ unsigned int ifls; /* vendor-specific */
+};
+
+/* There is by now at least one vendor with differing details, so handle it */
+struct vendor_data {
+ unsigned int ifls;
+ unsigned int fifosize;
+};
+
+static struct vendor_data vendor_arm = {
+ .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fifosize = 16,
+};
+
+static struct vendor_data vendor_st = {
+ .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .fifosize = 64,
};
static void pl011_stop_tx(struct uart_port *port)
@@ -360,8 +377,7 @@
if (retval)
goto clk_dis;
- writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- uap->port.membase + UART011_IFLS);
+ writew(uap->ifls, uap->port.membase + UART011_IFLS);
/*
* Provoke TX FIFO interrupt into asserting.
@@ -732,6 +748,7 @@
static int pl011_probe(struct amba_device *dev, struct amba_id *id)
{
struct uart_amba_port *uap;
+ struct vendor_data *vendor = id->data;
void __iomem *base;
int i, ret;
@@ -762,12 +779,13 @@
goto unmap;
}
+ uap->ifls = vendor->ifls;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
uap->port.iotype = UPIO_MEM;
uap->port.irq = dev->irq[0];
- uap->port.fifosize = 16;
+ uap->port.fifosize = vendor->fifosize;
uap->port.ops = &amba_pl011_pops;
uap->port.flags = UPF_BOOT_AUTOCONF;
uap->port.line = i;
@@ -812,6 +830,12 @@
{
.id = 0x00041011,
.mask = 0x000fffff,
+ .data = &vendor_arm,
+ },
+ {
+ .id = 0x00380802,
+ .mask = 0x00ffffff,
+ .data = &vendor_st,
},
{ 0, 0 },
};
@@ -845,7 +869,11 @@
uart_unregister_driver(&amba_reg);
}
-module_init(pl011_init);
+/*
+ * While this can be a module, if builtin it's most likely the console
+ * So let's leave module_exit but move module_init to an earlier place
+ */
+arch_initcall(pl011_init);
module_exit(pl011_exit);
MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 9f460b1..738c8a5 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -66,7 +66,7 @@
#define ONEMS 0xb0 /* One Millisecond register */
#define UTS 0xb4 /* UART Test Register */
#endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
#define BIPR1 0xb0 /* Incremental Preset Register 1 */
#define BIPR2 0xb4 /* Incremental Preset Register 2 */
#define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +96,7 @@
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
#endif
#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -127,7 +127,7 @@
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
#endif
@@ -180,13 +180,6 @@
#define UTS_SOFTRST (1<<0) /* Software reset */
/* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR 204
-#define MINOR_START 41
-#define DEV_NAME "ttySMX"
-#define MAX_INTERNAL_IRQ IMX_IRQS
-#endif
-
#ifdef CONFIG_ARCH_MXC
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
@@ -1031,6 +1024,8 @@
if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
co->index = 0;
sport = imx_ports[co->index];
+ if(sport == NULL)
+ return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 83a185d..7c61251 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -118,7 +118,7 @@
config SPI_IMX
tristate "Freescale iMX SPI controller"
- depends on ARCH_IMX && EXPERIMENTAL
+ depends on ARCH_MX1 && EXPERIMENTAL
help
This enables using the Freescale iMX SPI controller in master
mode.
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0048f11..8083d86 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -397,7 +397,7 @@
config FB_IMX
tristate "Motorola i.MX LCD support"
- depends on FB && (ARCH_IMX || ARCH_MX2)
+ depends on FB && (ARCH_MX1 || ARCH_MX2)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 9894de1..b7af525 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -706,7 +706,7 @@
dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
/* We only need one interrupt, it will be re-enabled as needed */
- disable_irq(ichannel->eof_irq);
+ disable_irq_nosync(ichannel->eof_irq);
complete(&mx3_fbi->flip_cmpl);
}
@@ -1366,7 +1366,7 @@
mx3fb_blank(FB_BLANK_UNBLANK, fbi);
- dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+ dev_info(dev, "registered, using mode %s\n", fb_mode);
ret = register_framebuffer(fbi);
if (ret < 0)
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 8aa6e47..5d4f348 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -133,8 +133,7 @@
struct lcd_ctrl_extif *extif;
struct lcd_ctrl *int_ctrl;
- void (*power_up)(struct device *dev);
- void (*power_down)(struct device *dev);
+ struct clk *sys_ck;
} hwa742;
struct lcd_ctrl hwa742_ctrl;
@@ -915,14 +914,13 @@
hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
/* Enable sleep mode */
hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1);
- if (hwa742.power_down != NULL)
- hwa742.power_down(hwa742.fbdev->dev);
+ clk_disable(hwa742.sys_ck);
}
static void hwa742_resume(void)
{
- if (hwa742.power_up != NULL)
- hwa742.power_up(hwa742.fbdev->dev);
+ clk_enable(hwa742.sys_ck);
+
/* Disable sleep mode */
hwa742_write_reg(HWA742_POWER_SAVE, 0);
while (1) {
@@ -955,14 +953,13 @@
omapfb_conf = fbdev->dev->platform_data;
ctrl_conf = omapfb_conf->ctrl_platform_data;
- if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) {
+ if (ctrl_conf == NULL) {
dev_err(fbdev->dev, "HWA742: missing platform data\n");
r = -ENOENT;
goto err1;
}
- hwa742.power_down = ctrl_conf->power_down;
- hwa742.power_up = ctrl_conf->power_up;
+ hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
spin_lock_init(&hwa742.req_lock);
@@ -972,12 +969,11 @@
if ((r = hwa742.extif->init(fbdev)) < 0)
goto err2;
- ext_clk = ctrl_conf->get_clock_rate(fbdev->dev);
+ ext_clk = clk_get_rate(hwa742.sys_ck);
if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
goto err3;
hwa742.extif->set_timings(&hwa742.reg_timings);
- if (hwa742.power_up != NULL)
- hwa742.power_up(fbdev->dev);
+ clk_enable(hwa742.sys_ck);
calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
@@ -1040,8 +1036,7 @@
return 0;
err4:
- if (hwa742.power_down != NULL)
- hwa742.power_down(fbdev->dev);
+ clk_disable(hwa742.sys_ck);
err3:
hwa742.extif->cleanup();
err2:
@@ -1055,8 +1050,7 @@
hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
hwa742.extif->cleanup();
hwa742.int_ctrl->cleanup();
- if (hwa742.power_down != NULL)
- hwa742.power_down(hwa742.fbdev->dev);
+ clk_disable(hwa742.sys_ck);
}
struct lcd_ctrl hwa742_ctrl = {
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 48ee32a..42949e2 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -114,6 +114,9 @@
#define UART011_IFLS_TX4_8 (2 << 0)
#define UART011_IFLS_TX6_8 (3 << 0)
#define UART011_IFLS_TX7_8 (4 << 0)
+/* special values for ST vendor with deeper fifo */
+#define UART011_IFLS_RX_HALF (5 << 3)
+#define UART011_IFLS_TX_HALF (5 << 0)
#define UART011_OEIM (1 << 10) /* overrun error interrupt mask */
#define UART011_BEIM (1 << 9) /* break error interrupt mask */
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 1db9bbf..1d37f42 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -142,4 +142,17 @@
*/
struct clk *clk_get_sys(const char *dev_id, const char *con_id);
+/**
+ * clk_add_alias - add a new clock alias
+ * @alias: name for clock alias
+ * @alias_dev_name: device name
+ * @id: platform specific clock name
+ * @dev: device
+ *
+ * Allows using generic clock names for drivers by adding a new alias.
+ * Assumes clkdev, see clkdev.h for more info.
+ */
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+ struct device *dev);
+
#endif
