diff --git a/CREDITS b/CREDITS
index 3b9e160..9bd099d 100644
--- a/CREDITS
+++ b/CREDITS
@@ -882,13 +882,12 @@
 S: USA
 
 N: Randy Dunlap
-E: rddunlap@osdl.org
+E: rdunlap@xenotime.net
 W: http://www.xenotime.net/linux/linux.html
 W: http://www.linux-usb.org
 D: Linux-USB subsystem, USB core/UHCI/printer/storage drivers
 D: x86 SMP, ACPI, bootflag hacking
-S: 12725 SW Millikan Way, Suite 400
-S: Beaverton, Oregon 97005
+S: (ask for current address)
 S: USA
 
 N: Bob Dunlop
diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop
new file mode 100644
index 0000000..a50c70f
--- /dev/null
+++ b/Documentation/dvb/README.flexcop
@@ -0,0 +1,205 @@
+This README escorted the skystar2-driver rewriting procedure. It describes the
+state of the new flexcop-driver set and some internals are written down here
+too.
+
+This document hopefully describes things about the flexcop and its
+device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
+drivers based on the skystar2.c and other information.
+
+Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
+touched and rewritten.
+
+History & News
+==============
+  2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
+
+
+
+
+General coding processing
+=========================
+
+We should proceed as follows (as long as no one complains):
+
+0) Think before start writing code!
+
+1) rewriting the skystar2.c with the help of the flexcop register descriptions
+and splitting up the files to a pci-bus-part and a flexcop-part.
+The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
+device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
+
+2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
+and other pci drivers)
+
+3) make some beautification (see 'Improvements when rewriting (refactoring) is
+done')
+
+4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
+a wider tester audience.
+
+5) creating an usb-bus-part using the already written flexcop code for the pci
+card.
+
+Idea: create a kernel-object for the flexcop and export all important
+functions. This option saves kernel-memory, but maybe a lot of functions have
+to be exported to kernel namespace.
+
+
+Current situation
+=================
+
+0) Done :)
+1) Done (some minor issues left)
+2) Done
+3) Not ready yet, more information is necessary
+4) next to be done (see the table below)
+5) USB driver is working (yes, there are some minor issues)
+
+What seems to be ready?
+-----------------------
+
+1) Rewriting
+1a) i2c is cut off from the flexcop-pci.c and seems to work
+1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
+1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
+1e) eeprom (reading MAC address)
+1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
+1f) misc. register accesses for reading parameters (e.g. resetting, revision)
+1g) pid/mac filter (flexcop-hw-filter.c)
+1i) dvb-stuff initialization in flexcop.c (done)
+1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
+1j) remove flexcop initialization from flexcop-pci.c completely (done)
+1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
+1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
+non-static where possible, moved code to proper places)
+
+2) Search for errors in the leftover of flexcop-pci.c (partially done)
+5a) add MAC address reading
+5c) feeding of ISOC data to the software demux (format of the isochronous data
+and speed optimization, no real error) (thanks to Vadim Catana)
+
+What to do in the near future?
+--------------------------------------
+(no special order here)
+
+5) USB driver
+5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
+
+Testing changes
+---------------
+
+O             = item is working
+P             = item is partially working
+X             = item is not working
+N             = item does not apply here
+<empty field> = item need to be examined
+
+       | PCI                               | USB
+item   | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
+-------+-------+---------+---------+-------+-------+---------+---------+-------
+1a)    | O     |         |         |       | N     | N       | N       | N
+1b)    | O     |         |         |       |       |         | O       |
+1c)    | N     | N       |         |       | N     | N       | O       |
+1d)    |                 O                 |                 O
+1e)    |                 O                 |                 O
+1f)    |                                   P
+1g)    |                                   O
+1h)    |                 P                 |
+1i)    |                 O                 |                 N
+1j)    |                 O                 |                 N
+1l)    |                 O                 |                 N
+2)     |                 O                 |                 N
+5a)    |                 N                 |                 O
+5b)*   |                 N                 |
+5c)    |                 N                 |                 O
+
+* - not done yet
+
+Known bugs and problems and TODO
+--------------------------------
+
+1g/h/l) when pid filtering is enabled on the pci card
+
+DMA usage currently:
+  The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
+  address and triggers an IRQ when it's full and starts writing to the second
+  address. When the second address is full, the IRQ is triggered again, and
+  the flexcop writes to first address again, and so on.
+  The buffersize of each address is currently 640*188 bytes.
+
+  Problem is, when using hw-pid-filtering and doing some low-bandwidth
+  operation (like scanning) the buffers won't be filled enough to trigger
+  the IRQ. That's why:
+
+  When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
+  is triggered.  Is the current write address of DMA1 different to the one
+  during the last IRQ, then the data is passed to the demuxer.
+
+  There is an additional DMA-IRQ-method: packet count IRQ. This isn't
+  implemented correctly yet.
+
+  The solution is to disable HW PID filtering, but I don't know how the DVB
+  API software demux behaves on slow systems with 45MBit/s TS.
+
+Solved bugs :)
+--------------
+1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
+working)
+SOLUTION: also index 0 was affected, because net_translation is done for
+these indexes by default
+
+5b) isochronous transfer does only work in the first attempt (for the Sky2PC
+USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
+woke up again (don't know if this need fixes, see
+flexcop-fe-tuner.c:flexcop_sleep)
+
+NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
+anything in the while the driver is loaded the first time), no transfers take
+place anymore.
+
+Improvements when rewriting (refactoring) is done
+=================================================
+
+- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
+  (enable sleeping for other demods than dvb-s)
+- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
+
+Debugging
+---------
+- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
+  with this flexcop, this is important, because i2c is now using the
+  flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
+  that, please tell us so).
+
+Everything which is identical in the following table, can be put into a common
+flexcop-module.
+
+                  PCI                  USB
+-------------------------------------------------------------------------------
+Different:
+Register access:  accessing IO memory  USB control message
+I2C bus:          I2C bus of the FC    USB control message
+Data transfer:    DMA                  isochronous transfer
+EEPROM transfer:  through i2c bus      not clear yet
+
+Identical:
+Streaming:                 accessing registers
+PID Filtering:             accessing registers
+Sram destinations:         accessing registers
+Tuner/Demod:                     I2C bus
+DVB-stuff:            can be written for common use
+
+Acknowledgements (just for the rewriting part)
+================
+
+Bjarne Steinsbo thought a lot in the first place of the pci part for this code
+sharing idea.
+
+Andreas Oberritter for providing a recent PCI initialization template
+(pluto2.c).
+
+Boleslaw Ciesielski for pointing out a problem with firmware loader.
+
+Vadim Catana for correcting the USB transfer.
+
+comments, critics and ideas to linux-dvb@linuxtv.org.
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt
index e3cacf4..d64430b 100644
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -17,74 +17,53 @@
 "Device drivers" => "Multimedia devices"
   => "Video For Linux" => "BT848 Video For Linux"
 
+Furthermore you need to enable
+"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+  => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
+
 2) Loading Modules
 ==================
 
 In general you need to load the bttv driver, which will handle the gpio and
-i2c communication for us. Next you need the common dvb-bt8xx device driver
-and one frontend driver.
-
-The bttv driver will HANG YOUR SYSTEM IF YOU DO NOT SPECIFY THE CORRECT 
-CARD ID!
-
-(If you don't get your card running and you suspect that the card id you're
-using is wrong, have a look at "bttv-cards.c" for a list of possible card
-ids.)
-
-Pay attention to failures when you load the frontend drivers
-(e.g. dmesg, /var/log/messages).
+i2c communication for us, plus the common dvb-bt8xx device driver.
+The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
+TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
 
 3a) Nebula / Pinnacle PCTV
 --------------------------
 
-   $ modprobe bttv i2c_hw=1 card=0x68
-   $ modprobe dvb-bt8xx
-   
-For Nebula cards use the "nxt6000" frontend driver:
-   $ modprobe nxt6000
+   $ modprobe bttv (normally bttv is being loaded automatically by kmod)
+   $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
 
-For Pinnacle PCTV cards use the "cx24110" frontend driver:
-   $ modprobe cx24110
 
-3b) TwinHan
------------
+3b) TwinHan and Clones
+--------------------------
 
    $ modprobe bttv i2c_hw=1 card=0x71
    $ modprobe dvb-bt8xx
    $ modprobe dst
 
-The value 0x71 will override the PCI type detection for dvb-bt8xx, which 
-is necessary for TwinHan cards.#
+The value 0x71 will override the PCI type detection for dvb-bt8xx,
+which  is necessary for TwinHan cards.
 
-If you're having an older card (blue color circuit) and card=0x71 locks your
-machine, try using 0x68, too. If that does not work, ask on the DVB mailing list.
+If you're having an older card (blue color circuit) and card=0x71 locks
+your machine, try using 0x68, too. If that does not work, ask on the
+mailing list.
 
-The DST module takes a couple of useful parameters, in case the
-dst drivers fails to detect your type of card correctly.
+The DST module takes a couple of useful parameters.
 
-dst_type takes values 0 (satellite), 1 (terrestial TV), 2 (cable).
+verbose takes values 0 to 5. These values control the verbosity level.
 
-dst_type_flags takes bit combined values:
-1 = new tuner type packets. You can use this if your card is detected
-    and you have debug and you continually see the tuner packets not
-    working (make sure not a basic problem like dish alignment etc.)
+debug takes values 0 and 1. You can either disable or enable debugging.
 
-2 = TS 204. If your card tunes OK, but the picture is terrible, seemingly
-    breaking up in one half continually, and crc fails a lot, then
-    this is worth a try (or trying to turn off)
+dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
+0x20 means it has a Conditional Access slot.
 
-4 = has symdiv. Some cards, mostly without new tuner packets, require
-    a symbol division algorithm. Doesn't apply to terrestial TV.
-
-You can also specify a value to have the autodetected values turned off
-(e.g. 0). The autodected values are determined bythe cards 'response
+The autodected values are determined bythe cards 'response
 string' which you can see in your logs e.g.
 
-dst_check_ci: recognize DST-MOT
+dst_get_device_id: Recognise [DSTMCI]
 
-or 
-
-dst_check_ci: unable to recognize DSTXCI or STXCI
 
 --
-Authors: Richard Walker, Jamie Honan, Michael Hunold
+Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt
new file mode 100644
index 0000000..62e0701
--- /dev/null
+++ b/Documentation/dvb/ci.txt
@@ -0,0 +1,219 @@
+* For the user
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+NOTE: This document describes the usage of the high level CI API as
+in accordance to the Linux DVB API. This is a not a documentation for the,
+existing low level CI API.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To utilize the High Level CI capabilities,
+
+(1*) This point is valid only for the Twinhan/clones
+  For the Twinhan/Twinhan clones, the dst_ca module handles the CI
+  hardware handling.This module is loaded automatically if a CI
+  (Common Interface, that holds the CAM (Conditional Access Module)
+  is detected.
+
+(2) one requires a userspace application, ca_zap. This small userland
+  application is in charge of sending the descrambling related information
+  to the CAM.
+
+This application requires the following to function properly as of now.
+
+	(a) Tune to a valid channel, with szap.
+	  eg: $ szap -c channels.conf -r "TMC" -x
+
+	(b) a channels.conf containing a valid PMT PID
+
+	  eg: TMC:11996:h:0:27500:278:512:650:321
+
+	  here 278 is a valid PMT PID. the rest of the values are the
+	  same ones that szap uses.
+
+	(c) after running a szap, you have to run ca_zap, for the
+	  descrambler to function,
+
+	  eg: $ ca_zap patched_channels.conf "TMC"
+
+	  The patched means a patch to apply to scan, such that scan can
+	  generate a channels.conf_with pmt, which has this PMT PID info
+	  (NOTE: szap cannot use this channels.conf with the PMT_PID)
+
+
+	(d) Hopeflly Enjoy your favourite subscribed channel as you do with
+	  a FTA card.
+
+(3) Currently ca_zap, and dst_test, both are meant for demonstration
+  purposes only, they can become full fledged applications if necessary.
+
+
+* Cards that fall in this category
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+At present the cards that fall in this category are the Twinhan and it's
+clones, these cards are available as VVMER, Tomato, Hercules, Orange and
+so on.
+
+* CI modules that are supported
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The CI module support is largely dependant upon the firmware on the cards
+Some cards do support almost all of the available CI modules. There is
+nothing much that can be done in order to make additional CI modules
+working with these cards.
+
+Modules that have been tested by this driver at present are
+
+(1) Irdeto 1 and 2 from SCM
+(2) Viaccess from SCM
+(3) Dragoncam
+
+* The High level CI API
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+* For the programmer
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+With the High Level CI approach any new card with almost any random
+architecture can be implemented with this style, the definitions
+insidethe switch statement can be easily adapted for any card, thereby
+eliminating the need for any additional ioctls.
+
+The disadvantage is that the driver/hardware has to manage the rest. For
+the application programmer it would be as simple as sending/receiving an
+array to/from the CI ioctls as defined in the Linux DVB API. No changes
+have been made in the API to accomodate this feature.
+
+
+* Why the need for another CI interface ?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+This is one of the most commonly asked question. Well a nice question.
+Strictly speaking this is not a new interface.
+
+The CI interface is defined in the DVB API in ca.h as
+
+typedef struct ca_slot_info {
+	int num;               /* slot number */
+
+	int type;              /* CA interface this slot supports */
+#define CA_CI            1     /* CI high level interface */
+#define CA_CI_LINK       2     /* CI link layer level interface */
+#define CA_CI_PHYS       4     /* CI physical layer level interface */
+#define CA_DESCR         8     /* built-in descrambler */
+#define CA_SC          128     /* simple smart card interface */
+
+	unsigned int flags;
+#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
+#define CA_CI_MODULE_READY   2
+} ca_slot_info_t;
+
+
+
+This CI interface follows the CI high level interface, which is not
+implemented by most applications. Hence this area is revisited.
+
+This CI interface is quite different in the case that it tries to
+accomodate all other CI based devices, that fall into the other categories
+
+This means that this CI interface handles the EN50221 style tags in the
+Application layer only and no session management is taken care of by the
+application. The driver/hardware will take care of all that.
+
+This interface is purely an EN50221 interface exchanging APDU's. This
+means that no session management, link layer or a transport layer do
+exist in this case in the application to driver communication. It is
+as simple as that. The driver/hardware has to take care of that.
+
+
+With this High Level CI interface, the interface can be defined with the
+regular ioctls.
+
+All these ioctls are also valid for the High level CI interface
+
+#define CA_RESET          _IO('o', 128)
+#define CA_GET_CAP        _IOR('o', 129, ca_caps_t)
+#define CA_GET_SLOT_INFO  _IOR('o', 130, ca_slot_info_t)
+#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
+#define CA_GET_MSG        _IOR('o', 132, ca_msg_t)
+#define CA_SEND_MSG       _IOW('o', 133, ca_msg_t)
+#define CA_SET_DESCR      _IOW('o', 134, ca_descr_t)
+#define CA_SET_PID        _IOW('o', 135, ca_pid_t)
+
+
+On querying the device, the device yields information thus
+
+CA_GET_SLOT_INFO
+----------------------------
+Command = [info]
+APP: Number=[1]
+APP: Type=[1]
+APP: flags=[1]
+APP: CI High level interface
+APP: CA/CI Module Present
+
+CA_GET_CAP
+----------------------------
+Command = [caps]
+APP: Slots=[1]
+APP: Type=[1]
+APP: Descrambler keys=[16]
+APP: Type=[1]
+
+CA_SEND_MSG
+----------------------------
+Descriptors(Program Level)=[ 09 06 06 04 05 50 ff f1]
+Found CA descriptor @ program level
+
+(20) ES type=[2] ES pid=[201]  ES length =[0 (0x0)]
+(25) ES type=[4] ES pid=[301]  ES length =[0 (0x0)]
+ca_message length is 25 (0x19) bytes
+EN50221 CA MSG=[ 9f 80 32 19 03 01 2d d1 f0 08 01 09 06 06 04 05 50 ff f1 02 e0 c9 00 00 04 e1 2d 00 00]
+
+
+Not all ioctl's are implemented in the driver from the API, the other
+features of the hardware that cannot be implemented by the API are achieved
+using the CA_GET_MSG and CA_SEND_MSG ioctls. An EN50221 style wrapper is
+used to exchange the data to maintain compatibility with other hardware.
+
+
+/* a message to/from a CI-CAM */
+typedef struct ca_msg {
+	unsigned int index;
+	unsigned int type;
+	unsigned int length;
+	unsigned char msg[256];
+} ca_msg_t;
+
+
+The flow of data can be described thus,
+
+
+
+
+
+	App (User)
+	-----
+	parse
+	  |
+	  |
+	  v
+	en50221 APDU (package)
+   --------------------------------------
+   |	  |				| High Level CI driver
+   |	  |				|
+   |	  v				|
+   |	en50221 APDU (unpackage)	|
+   |	  |				|
+   |	  |				|
+   |	  v				|
+   |	sanity checks			|
+   |	  |				|
+   |	  |				|
+   |	  v				|
+   |	do (H/W dep)			|
+   --------------------------------------
+	  |    Hardware
+	  |
+	  v
+
+
+
+
+The High Level CI interface uses the EN50221 DVB standard, following a
+standard ensures futureproofness.
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 3ffdcb3..a750f01 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -107,7 +107,7 @@
 sub tda10046 {
     my $sourcefile = "tt_budget_217g.zip";
     my $url = "http://www.technotrend.de/new/217g/$sourcefile";
-    my $hash = "a25b579e37109af60f4a36c37893957c";
+    my $hash = "6a7e1e2f2644b162ff0502367553c72d";
     my $outfile = "dvb-fe-tda10046.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
 
@@ -115,7 +115,7 @@
 
     wgetfile($sourcefile, $url);
     unzip($sourcefile, $tmpdir);
-    extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24479, "$tmpdir/fwtmp");
+    extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24478, "$tmpdir/fwtmp");
     verify("$tmpdir/fwtmp", $hash);
     copy("$tmpdir/fwtmp", $outfile);
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index d3c52dd..b9eb209 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -63,3 +63,23 @@
 	people, who might be using implementations that I am not aware
 	of, to adjust to this upcoming change.
 Who:	Paul E. McKenney <paulmck@us.ibm.com>
+
+---------------------------
+
+What:	IEEE1394 Audio and Music Data Transmission Protocol driver,
+	Connection Management Procedures driver
+When:	November 2005
+Files:	drivers/ieee1394/{amdtp,cmp}*
+Why:	These are incomplete, have never worked, and are better implemented
+	in userland via raw1394 (see http://freebob.sourceforge.net/ for
+	example.)
+Who:	Jody McIntyre <scjody@steamballoon.com>
+
+---------------------------
+
+What:	raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
+When:	November 2005
+Why:	Deprecated in favour of the new ioctl-based rawiso interface, which is
+	more efficient.  You should really be using libraw1394 for raw1394
+	access anyway.
+Who:	Jody McIntyre <scjody@steamballoon.com>
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index e97d024..988a62f 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -7,7 +7,6 @@
      |-- 0000:17:00.0
      |   |-- class
      |   |-- config
-     |   |-- detach_state
      |   |-- device
      |   |-- irq
      |   |-- local_cpus
@@ -19,7 +18,7 @@
      |   |-- subsystem_device
      |   |-- subsystem_vendor
      |   `-- vendor
-     `-- detach_state
+     `-- ...
 
 The topmost element describes the PCI domain and bus number.  In this case,
 the domain number is 0000 and the bus number is 17 (both values are in hex).
@@ -31,7 +30,6 @@
        ----		   --------
        class		   PCI class (ascii, ro)
        config		   PCI config space (binary, rw)
-       detach_state	   connection status (bool, rw)
        device		   PCI device (ascii, ro)
        irq		   IRQ number (ascii, ro)
        local_cpus	   nearby CPU mask (cpumask, ro)
@@ -85,4 +83,4 @@
 
 Legacy resources are protected by the HAVE_PCI_LEGACY define.  Platforms
 wishing to support legacy functionality should define it and provide
-pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
\ No newline at end of file
+pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 5d4ae9a..f987afe 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -207,27 +207,6 @@
 #READY_AFTER_RESUME
 #
 
-Driver Detach Power Management
-
-The kernel now supports the ability to place a device in a low-power
-state when it is detached from its driver, which happens when its
-module is removed. 
-
-Each device contains a 'detach_state' file in its sysfs directory
-which can be used to control this state. Reading from this file
-displays what the current detach state is set to. This is 0 (On) by
-default. A user may write a positive integer value to this file in the
-range of 1-4 inclusive. 
-
-A value of 1-3 will indicate the device should be placed in that
-low-power state, which will cause ->suspend() to be called for that
-device. A value of 4 indicates that the device should be shutdown, so
-->shutdown() will be called for that device. 
-
-The driver is responsible for reinitializing the device when the
-module is re-inserted during it's ->probe() (or equivalent) method. 
-The driver core will not call any extra functions when binding the
-device to the driver. 
 
 pm_message_t meaning
 
diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.txt
index c0a62e1..dca75cb 100644
--- a/Documentation/powerpc/hvcs.txt
+++ b/Documentation/powerpc/hvcs.txt
@@ -347,8 +347,8 @@
 looks like the following:
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
-	.   current_vty   devspec  name          partner_vtys
-	..  detach_state  index    partner_clcs  vterm_state
+	.   current_vty   devspec       name          partner_vtys
+	..  index         partner_clcs  vterm_state
 
 Each entry is provided, by default with a "name" attribute.  Reading the
 "name" attribute will reveal the device type as shown in the following
diff --git a/Makefile b/Makefile
index bddcb86..1bb0283 100644
--- a/Makefile
+++ b/Makefile
@@ -530,7 +530,7 @@
 include $(srctree)/arch/$(ARCH)/Makefile
 
 # arch Makefile may override CC so keep this after arch Makefile is included
-NOSTDINC_FLAGS := -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 CHECKFLAGS     += $(NOSTDINC_FLAGS)
 
 # warn about C99 declaration after statement
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 64e450d..167fd89f 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -1150,16 +1150,13 @@
 	if (get_tv32(&tmp, sleep))
 		goto fault;
 
-	ticks = tmp.tv_usec;
-	ticks = (ticks + (1000000 / HZ) - 1) / (1000000 / HZ);
-	ticks += tmp.tv_sec * HZ;
+	ticks = timeval_to_jiffies(&tmp);
 
 	current->state = TASK_INTERRUPTIBLE;
 	ticks = schedule_timeout(ticks);
 
 	if (remain) {
-		tmp.tv_sec = ticks / HZ;
-		tmp.tv_usec = ticks % HZ;
+		jiffies_to_timeval(ticks, &tmp);
 		if (put_tv32(remain, &tmp))
 			goto fault;
 	}
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
index 16dbc41..fa34a06 100644
--- a/arch/i386/kernel/cpu/amd.c
+++ b/arch/i386/kernel/cpu/amd.c
@@ -24,9 +24,6 @@
 
 static void __init init_amd(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_X86_SMP
-	int cpu = c == &boot_cpu_data ? 0 : c - cpu_data;
-#endif
 	u32 l, h;
 	int mbytes = num_physpages >> (20-PAGE_SHIFT);
 	int r;
@@ -205,7 +202,9 @@
 	 * of two.
 	 */
 	if (c->x86_num_cores > 1) {
-		cpu_core_id[cpu] = cpu >> hweight32(c->x86_num_cores - 1);
+		int cpu = smp_processor_id();
+		/* Fix up the APIC ID following AMD specifications. */
+		cpu_core_id[cpu] >>= hweight32(c->x86_num_cores - 1);
 		printk(KERN_INFO "CPU %d(%d) -> Core %d\n",
 		       cpu, c->x86_num_cores, cpu_core_id[cpu]);
 	}
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 6be0310..11e6e6f 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -243,6 +243,13 @@
 	}
 
 	early_intel_workaround(c);
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_X86_HT
+	phys_proc_id[smp_processor_id()] =
+#endif
+	cpu_core_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff;
+#endif
 }
 
 void __init generic_identify(struct cpuinfo_x86 * c)
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index be52c5a..8e8e895 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -253,7 +253,7 @@
 #define MAX_PCIEROOT	6
 static int quirk_aspm_offset[MAX_PCIEROOT << 3];
 
-#define GET_INDEX(a, b) (((a - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + b)
+#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7))
 
 static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
 {
diff --git a/arch/ia64/ia32/ia32_ioctl.c b/arch/ia64/ia32/ia32_ioctl.c
index 9845dab..164b211 100644
--- a/arch/ia64/ia32/ia32_ioctl.c
+++ b/arch/ia64/ia32/ia32_ioctl.c
@@ -13,7 +13,6 @@
   
 #define	INCLUDES
 #include "compat_ioctl.c"
-#include <asm/ioctl32.h>
 
 #define IOCTL_NR(a)	((a) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT))
 
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index c5f1043..53166f3 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -1,7 +1,7 @@
 /*
  *  pmu.c, Power Management Unit routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *  Copyright (C) 2003-2005  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -17,7 +17,9 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/smp.h>
 #include <linux/types.h>
@@ -27,20 +29,31 @@
 #include <asm/reboot.h>
 #include <asm/system.h>
 
-#define PMUCNT2REG	KSEG1ADDR(0x0f0000c6)
+#define PMU_TYPE1_BASE	0x0b0000a0UL
+#define PMU_TYPE1_SIZE	0x0eUL
+
+#define PMU_TYPE2_BASE	0x0f0000c0UL
+#define PMU_TYPE2_SIZE	0x10UL
+
+#define PMUCNT2REG	0x06
  #define SOFTRST	0x0010
 
+static void __iomem *pmu_base;
+
+#define pmu_read(offset)		readw(pmu_base + (offset))
+#define pmu_write(offset, value)	writew((value), pmu_base + (offset))
+
 static inline void software_reset(void)
 {
-	uint16_t val;
+	uint16_t pmucnt2;
 
 	switch (current_cpu_data.cputype) {
 	case CPU_VR4122:
 	case CPU_VR4131:
 	case CPU_VR4133:
-		val = readw(PMUCNT2REG);
-		val |= SOFTRST;
-		writew(val, PMUCNT2REG);
+		pmucnt2 = pmu_read(PMUCNT2REG);
+		pmucnt2 |= SOFTRST;
+		pmu_write(PMUCNT2REG, pmucnt2);
 		break;
 	default:
 		break;
@@ -71,6 +84,34 @@
 
 static int __init vr41xx_pmu_init(void)
 {
+	unsigned long start, size;
+
+	switch (current_cpu_data.cputype) {
+	case CPU_VR4111:
+	case CPU_VR4121:
+		start = PMU_TYPE1_BASE;
+		size = PMU_TYPE1_SIZE;
+		break;
+	case CPU_VR4122:
+	case CPU_VR4131:
+	case CPU_VR4133:
+		start = PMU_TYPE2_BASE;
+		size = PMU_TYPE2_SIZE;
+		break;
+	default:
+		printk("Unexpected CPU of NEC VR4100 series\n");
+		return -ENODEV;
+	}
+
+	if (request_mem_region(start, size, "PMU") == NULL)
+		return -EBUSY;
+
+	pmu_base = ioremap(start, size);
+	if (pmu_base == NULL) {
+		release_mem_region(start, size);
+		return -EBUSY;
+	}
+
 	_machine_restart = vr41xx_restart;
 	_machine_halt = vr41xx_halt;
 	_machine_power_off = vr41xx_power_off;
@@ -78,4 +119,4 @@
 	return 0;
 }
 
-early_initcall(vr41xx_pmu_init);
+core_initcall(vr41xx_pmu_init);
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 5dfb42f..309797d 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -753,6 +753,8 @@
 	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
 	*cmdline_p = cmd_line;
 
+	parse_early_param();
+
 	/* set up the bootmem stuff with available memory */
 	do_init_bootmem();
 	if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
diff --git a/arch/um/kernel/irq_user.c b/arch/um/kernel/irq_user.c
index 6d6f948..b3074cb 100644
--- a/arch/um/kernel/irq_user.c
+++ b/arch/um/kernel/irq_user.c
@@ -236,9 +236,15 @@
 				       (*prev)->fd, pollfds[i].fd);
 				goto out;
 			}
-			memcpy(&pollfds[i], &pollfds[i + 1],
-			       (pollfds_num - i - 1) * sizeof(pollfds[0]));
+
 			pollfds_num--;
+
+			/* This moves the *whole* array after pollfds[i] (though
+			 * it doesn't spot as such)! */
+
+			memmove(&pollfds[i], &pollfds[i + 1],
+			       (pollfds_num - i) * sizeof(pollfds[0]));
+
 			if(last_irq_ptr == &old_fd->next) 
 				last_irq_ptr = prev;
 			*prev = (*prev)->next;
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 44ee7f6..82cb2a3 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -303,6 +303,20 @@
 	  as it is off-chip.  You can find the HPET spec at
 	  <http://www.intel.com/labs/platcomp/hpet/hpetspec.htm>.
 
+config X86_PM_TIMER
+	bool "PM timer"
+	default y
+	help
+	  Support the ACPI PM timer for time keeping. This is slow,
+	  but is useful on some chipsets without HPET on systems with more
+	  than one CPU. On a single processor or single socket multi core
+	  system it is normally not required.
+	  When the PM timer is active 64bit vsyscalls are disabled
+	  and should not be enabled (/proc/sys/kernel/vsyscall64 should
+	  not be changed).
+	  The kernel selects the PM timer only as a last resort, so it is
+	  useful to enable just in case.
+
 config HPET_EMULATE_RTC
 	bool "Provide RTC interrupt"
 	depends on HPET_TIMER && RTC=y
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 9ce51de..569595b 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-bk7
-# Sat Mar 12 23:43:44 2005
+# Linux kernel version: 2.6.12-rc4
+# Fri May 13 06:39:11 2005
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -11,8 +11,6 @@
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_X86_CMPXCHG=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_GENERIC_IOMAP=y
 
@@ -22,6 +20,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -33,7 +32,6 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
@@ -43,10 +41,11 @@
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
@@ -93,6 +92,9 @@
 CONFIG_NUMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_NR_CPUS=8
+CONFIG_HPET_TIMER=y
+CONFIG_X86_PM_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
 CONFIG_GART_IOMMU=y
 CONFIG_SWIOTLB=y
 CONFIG_X86_MCE=y
@@ -100,6 +102,7 @@
 CONFIG_SECCOMP=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ISA_DMA_API=y
 
 #
 # Power management options
@@ -129,7 +132,7 @@
 # CONFIG_ACPI_IBM is not set
 CONFIG_ACPI_TOSHIBA=y
 CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
+# CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_BUS=y
 CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
@@ -141,6 +144,7 @@
 # CPU Frequency scaling
 #
 CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
@@ -150,7 +154,6 @@
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_TABLE=y
 
 #
 # CPUFreq processor drivers
@@ -164,6 +167,7 @@
 # shared options
 #
 CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
+# CONFIG_X86_SPEEDSTEP_LIB is not set
 
 #
 # Bus options (PCI etc.)
@@ -172,9 +176,11 @@
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
 CONFIG_UNORDERED_IO=y
+# CONFIG_PCIEPORTBUS is not set
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY_PROC is not set
 # CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -182,10 +188,6 @@
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -254,7 +256,7 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
@@ -308,7 +310,8 @@
 CONFIG_BLK_DEV_PIIX=y
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=y
+# CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
@@ -353,7 +356,7 @@
 #
 # SCSI low-level drivers
 #
-CONFIG_BLK_DEV_3W_XXXX_RAID=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
@@ -384,7 +387,6 @@
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -392,7 +394,6 @@
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -401,6 +402,7 @@
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -437,7 +439,6 @@
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -502,7 +503,7 @@
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
+CONFIG_TUN=y
 
 #
 # ARCnet devices
@@ -525,8 +526,7 @@
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
-CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
+# CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 CONFIG_FORCEDETH=y
@@ -536,7 +536,7 @@
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
-CONFIG_8139CP=m
+CONFIG_8139CP=y
 CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
@@ -671,6 +671,7 @@
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -696,6 +697,7 @@
 #
 CONFIG_AGP=y
 CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
 # CONFIG_DRM is not set
 # CONFIG_MWAVE is not set
 CONFIG_RAW_DRIVER=y
@@ -703,7 +705,7 @@
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
 CONFIG_MAX_RAW_DEVS=256
-CONFIG_HANGCHECK_TIMER=y
+# CONFIG_HANGCHECK_TIMER is not set
 
 #
 # TPM devices
@@ -786,6 +788,8 @@
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -797,8 +801,6 @@
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -826,7 +828,6 @@
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
@@ -965,7 +966,7 @@
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
+CONFIG_JOLIET=y
 # CONFIG_ZISOFS is not set
 # CONFIG_UDF_FS is not set
 
@@ -1092,9 +1093,10 @@
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
+CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index 0a3318e..5ca4a45 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -28,6 +28,7 @@
 obj-$(CONFIG_DUMMY_IOMMU)	+= pci-nommu.o pci-dma.o
 obj-$(CONFIG_SWIOTLB)		+= swiotlb.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer.o
 
 obj-$(CONFIG_MODULES)		+= module.o
 
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index 7e13545..f8e6cc4 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -33,6 +33,7 @@
 #include <asm/mpspec.h>
 #include <asm/pgalloc.h>
 #include <asm/mach_apic.h>
+#include <asm/nmi.h>
 
 int apic_verbosity;
 
@@ -925,7 +926,7 @@
 	unsigned id;
 	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
 
-	bitmap_empty(clustermap, NUM_APIC_CLUSTERS);
+	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
 
 	for (i = 0; i < NR_CPUS; i++) {
 		id = bios_cpu_apicid[i];
@@ -1056,7 +1057,7 @@
 		nr_ioapics = 0;
 #endif
 	setup_boot_APIC_clock();
-
+	check_nmi_watchdog();
 	return 0;
 }
 
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index 1086b5f..2881749 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -220,13 +220,18 @@
 	jmp sysret_check
 
 	/* Handle a signal */ 
-	/* edx:	work flags (arg3) */
 sysret_signal:
 	sti
+	testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx
+	jz    1f
+
+	/* Really a signal */
+	/* edx:	work flags (arg3) */
 	leaq do_notify_resume(%rip),%rax
 	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
 	xorl %esi,%esi # oldset -> arg2
 	call ptregscall_common
+1:	movl $_TIF_NEED_RESCHED,%edi
 	jmp sysret_check
 	
 	/* Do syscall tracing */
@@ -484,6 +489,8 @@
 	jmp retint_check
 	
 retint_signal:
+	testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx
+	jz    retint_swapgs
 	sti
 	SAVE_REST
 	movq $-1,ORIG_RAX(%rsp) 			
@@ -492,8 +499,8 @@
 	call do_notify_resume
 	RESTORE_REST
 	cli
+	movl $_TIF_NEED_RESCHED,%edi
 	GET_THREAD_INFO(%rcx)
-	movl $_TIF_WORK_MASK,%edi
 	jmp retint_check
 
 #ifdef CONFIG_PREEMPT
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 60be586..ac76843 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -1804,76 +1804,6 @@
 
 #define IO_APIC_MAX_ID		0xFE
 
-int __init io_apic_get_unique_id (int ioapic, int apic_id)
-{
-	union IO_APIC_reg_00 reg_00;
-	static physid_mask_t apic_id_map;
-	unsigned long flags;
-	int i = 0;
-
-	/*
-	 * The P4 platform supports up to 256 APIC IDs on two separate APIC 
-	 * buses (one for LAPICs, one for IOAPICs), where predecessors only 
-	 * supports up to 16 on one shared APIC bus.
-	 * 
-	 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
-	 *      advantage of new APIC bus architecture.
-	 */
-
-	if (physids_empty(apic_id_map))
-		apic_id_map = phys_cpu_present_map;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(ioapic, 0);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	if (apic_id >= IO_APIC_MAX_ID) {
-		apic_printk(APIC_QUIET, KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
-			"%d\n", ioapic, apic_id, reg_00.bits.ID);
-		apic_id = reg_00.bits.ID;
-	}
-
-	/*
-	 * Every APIC in a system must have a unique ID or we get lots of nice 
-	 * 'stuck on smp_invalidate_needed IPI wait' messages.
-	 */
-	if (physid_isset(apic_id, apic_id_map)) {
-
-		for (i = 0; i < IO_APIC_MAX_ID; i++) {
-			if (!physid_isset(i, apic_id_map))
-				break;
-		}
-
-		if (i == IO_APIC_MAX_ID)
-			panic("Max apic_id exceeded!\n");
-
-		apic_printk(APIC_VERBOSE, KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
-			"trying %d\n", ioapic, apic_id, i);
-
-		apic_id = i;
-	} 
-
-	physid_set(apic_id, apic_id_map);
-
-	if (reg_00.bits.ID != apic_id) {
-		reg_00.bits.ID = apic_id;
-
-		spin_lock_irqsave(&ioapic_lock, flags);
-		io_apic_write(ioapic, 0, reg_00.raw);
-		reg_00.raw = io_apic_read(ioapic, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-
-		/* Sanity check */
-		if (reg_00.bits.ID != apic_id)
-			panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
-	}
-
-	apic_printk(APIC_VERBOSE,KERN_INFO "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
-
-	return apic_id;
-}
-
-
 int __init io_apic_get_version (int ioapic)
 {
 	union IO_APIC_reg_01	reg_01;
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index 7ec031c..f86d9db 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -107,6 +107,7 @@
 static void __init MP_processor_info (struct mpc_config_processor *m)
 {
 	int ver;
+	static int found_bsp=0;
 
 	if (!(m->mpc_cpuflag & CPU_ENABLED))
 		return;
@@ -126,11 +127,6 @@
 			" Processor ignored.\n", NR_CPUS);
 		return;
 	}
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-			" Processor ignored.\n", maxcpus);
-		return;
-	}
 
 	num_processors++;
 
@@ -150,7 +146,19 @@
 		ver = 0x10;
 	}
 	apic_version[m->mpc_apicid] = ver;
-	bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
+ 	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
+ 		/*
+ 		 * bios_cpu_apicid is required to have processors listed
+ 		 * in same order as logical cpu numbers. Hence the first
+ 		 * entry is BSP, and so on.
+ 		 */
+ 		bios_cpu_apicid[0] = m->mpc_apicid;
+ 		x86_cpu_to_apicid[0] = m->mpc_apicid;
+ 		found_bsp = 1;
+ 	} else {
+ 		bios_cpu_apicid[num_processors - found_bsp] = m->mpc_apicid;
+ 		x86_cpu_to_apicid[num_processors - found_bsp] = m->mpc_apicid;
+ 	}
 }
 
 static void __init MP_bus_info (struct mpc_config_bus *m)
@@ -759,7 +767,7 @@
 	mp_ioapics[idx].mpc_apicaddr = address;
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+	mp_ioapics[idx].mpc_apicid = id;
 	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
 	
 	/* 
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index 61de0b3..31c0f2e 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -33,6 +33,7 @@
 #include <asm/msr.h>
 #include <asm/proto.h>
 #include <asm/kdebug.h>
+#include <asm/local.h>
 
 /*
  * lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
@@ -59,7 +60,8 @@
 
 unsigned int nmi_watchdog = NMI_DEFAULT;
 static unsigned int nmi_hz = HZ;
-unsigned int nmi_perfctr_msr;	/* the MSR to reset in NMI handler */
+static unsigned int nmi_perfctr_msr;	/* the MSR to reset in NMI handler */
+static unsigned int nmi_p4_cccr_val;
 
 /* Note that these events don't tick when the CPU idles. This means
    the frequency varies with CPU load. */
@@ -71,61 +73,87 @@
 #define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING	0x76
 #define K7_NMI_EVENT		K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
 
-#define P6_EVNTSEL0_ENABLE	(1 << 22)
-#define P6_EVNTSEL_INT		(1 << 20)
-#define P6_EVNTSEL_OS		(1 << 17)
-#define P6_EVNTSEL_USR		(1 << 16)
-#define P6_EVENT_CPU_CLOCKS_NOT_HALTED	0x79
-#define P6_NMI_EVENT		P6_EVENT_CPU_CLOCKS_NOT_HALTED
+#define MSR_P4_MISC_ENABLE	0x1A0
+#define MSR_P4_MISC_ENABLE_PERF_AVAIL	(1<<7)
+#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL	(1<<12)
+#define MSR_P4_PERFCTR0		0x300
+#define MSR_P4_CCCR0		0x360
+#define P4_ESCR_EVENT_SELECT(N)	((N)<<25)
+#define P4_ESCR_OS		(1<<3)
+#define P4_ESCR_USR		(1<<2)
+#define P4_CCCR_OVF_PMI0	(1<<26)
+#define P4_CCCR_OVF_PMI1	(1<<27)
+#define P4_CCCR_THRESHOLD(N)	((N)<<20)
+#define P4_CCCR_COMPLEMENT	(1<<19)
+#define P4_CCCR_COMPARE		(1<<18)
+#define P4_CCCR_REQUIRED	(3<<16)
+#define P4_CCCR_ESCR_SELECT(N)	((N)<<13)
+#define P4_CCCR_ENABLE		(1<<12)
+/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
+   CRU_ESCR0 (with any non-null event selector) through a complemented
+   max threshold. [IA32-Vol3, Section 14.9.9] */
+#define MSR_P4_IQ_COUNTER0	0x30C
+#define P4_NMI_CRU_ESCR0	(P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
+#define P4_NMI_IQ_CCCR0	\
+	(P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT|	\
+	 P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
+
+static __init inline int nmi_known_cpu(void)
+{
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_AMD:
+		return boot_cpu_data.x86 == 15;
+	case X86_VENDOR_INTEL:
+		return boot_cpu_data.x86 == 15;
+	}
+	return 0;
+}
 
 /* Run after command line and cpu_init init, but before all other checks */
 void __init nmi_watchdog_default(void)
 {
 	if (nmi_watchdog != NMI_DEFAULT)
 		return;
-
-	/* For some reason the IO APIC watchdog doesn't work on the AMD
-	   8111 chipset. For now switch to local APIC mode using
-	   perfctr0 there.  On Intel CPUs we don't have code to handle
-	   the perfctr and the IO-APIC seems to work, so use that.  */
-
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
-		nmi_watchdog = NMI_LOCAL_APIC; 
-		printk(KERN_INFO 
-              "Using local APIC NMI watchdog using perfctr0\n");
-	} else {
-		printk(KERN_INFO "Using IO APIC NMI watchdog\n");
+	if (nmi_known_cpu())
+		nmi_watchdog = NMI_LOCAL_APIC;
+	else
 		nmi_watchdog = NMI_IO_APIC;
-	}
 }
 
-/* Why is there no CPUID flag for this? */
-static __init int cpu_has_lapic(void)
+#ifdef CONFIG_SMP
+/* The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
 {
-	switch (boot_cpu_data.x86_vendor) { 
-	case X86_VENDOR_INTEL:
-	case X86_VENDOR_AMD: 
-		return boot_cpu_data.x86 >= 6; 
-	/* .... add more cpus here or find a different way to figure this out. */	
-	default:
-		return 0;
-	} 	
+	volatile int *endflag = data;
+	local_irq_enable();
+	/* Intentionally don't use cpu_relax here. This is
+	   to make sure that the performance counter really ticks,
+	   even if there is a simulator or similar that catches the
+	   pause instruction. On a real HT machine this is fine because
+	   all other CPUs are busy with "useless" delay loops and don't
+	   care if they get somewhat less cycles. */
+	while (*endflag == 0)
+		barrier();
 }
+#endif
 
-static int __init check_nmi_watchdog (void)
+int __init check_nmi_watchdog (void)
 {
-	int counts[NR_CPUS];
+	volatile int endflag = 0;
+	int *counts;
 	int cpu;
 
-	if (nmi_watchdog == NMI_NONE)
-		return 0;
+	counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+	if (!counts)
+		return -1;
 
-	if (nmi_watchdog == NMI_LOCAL_APIC && !cpu_has_lapic())  {
-		nmi_watchdog = NMI_NONE;
-		return -1; 
-	}	
+	printk(KERN_INFO "testing NMI watchdog ... ");
 
-	printk(KERN_INFO "Testing NMI watchdog ... ");
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
 
 	for (cpu = 0; cpu < NR_CPUS; cpu++)
 		counts[cpu] = cpu_pda[cpu].__nmi_count; 
@@ -133,15 +161,22 @@
 	mdelay((10*1000)/nmi_hz); // wait 10 ticks
 
 	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		if (!cpu_online(cpu))
+			continue;
 		if (cpu_pda[cpu].__nmi_count - counts[cpu] <= 5) {
-			printk("CPU#%d: NMI appears to be stuck (%d)!\n", 
+			endflag = 1;
+			printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
 			       cpu,
+			       counts[cpu],
 			       cpu_pda[cpu].__nmi_count);
 			nmi_active = 0;
 			lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
+			nmi_perfctr_msr = 0;
+			kfree(counts);
 			return -1;
 		}
 	}
+	endflag = 1;
 	printk("OK.\n");
 
 	/* now that we know it works we can reduce NMI frequency to
@@ -149,10 +184,9 @@
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		nmi_hz = 1;
 
+	kfree(counts);
 	return 0;
 }
-/* Have this called later during boot so counters are updating */
-late_initcall(check_nmi_watchdog);
 
 int __init setup_nmi_watchdog(char *str)
 {
@@ -170,7 +204,7 @@
 
 	if (nmi >= NMI_INVALID)
 		return 0;
-		nmi_watchdog = nmi;
+	nmi_watchdog = nmi;
 	return 1;
 }
 
@@ -185,7 +219,10 @@
 		wrmsr(MSR_K7_EVNTSEL0, 0, 0);
 		break;
 	case X86_VENDOR_INTEL:
-		wrmsr(MSR_IA32_EVNTSEL0, 0, 0);
+		if (boot_cpu_data.x86 == 15) {
+			wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
+			wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
+		}
 		break;
 	}
 	nmi_active = -1;
@@ -253,7 +290,7 @@
 
 static int nmi_pm_active; /* nmi_active before suspend */
 
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
+static int lapic_nmi_suspend(struct sys_device *dev, u32 state)
 {
 	nmi_pm_active = nmi_active;
 	disable_lapic_nmi_watchdog();
@@ -300,22 +337,27 @@
  * Original code written by Keith Owens.
  */
 
+static void clear_msr_range(unsigned int base, unsigned int n)
+{
+	unsigned int i;
+
+	for(i = 0; i < n; ++i)
+		wrmsr(base+i, 0, 0);
+}
+
 static void setup_k7_watchdog(void)
 {
 	int i;
 	unsigned int evntsel;
 
-	/* No check, so can start with slow frequency */
-	nmi_hz = 1; 
-
-	/* XXX should check these in EFER */
-
 	nmi_perfctr_msr = MSR_K7_PERFCTR0;
 
 	for(i = 0; i < 4; ++i) {
 		/* Simulator may not support it */
-		if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL))
+		if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) {
+			nmi_perfctr_msr = 0;
 			return;
+		}
 		wrmsrl(MSR_K7_PERFCTR0+i, 0UL);
 	}
 
@@ -325,12 +367,54 @@
 		| K7_NMI_EVENT;
 
 	wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
-	wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz*1000) / nmi_hz);
+	wrmsr(MSR_K7_PERFCTR0, -(cpu_khz/nmi_hz*1000), -1);
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
 	evntsel |= K7_EVNTSEL_ENABLE;
 	wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
 }
 
+
+static int setup_p4_watchdog(void)
+{
+	unsigned int misc_enable, dummy;
+
+	rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
+	if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
+		return 0;
+
+	nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
+	nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
+#ifdef CONFIG_SMP
+	if (smp_num_siblings == 2)
+		nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
+#endif
+
+	if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
+		clear_msr_range(0x3F1, 2);
+	/* MSR 0x3F0 seems to have a default value of 0xFC00, but current
+	   docs doesn't fully define it, so leave it alone for now. */
+	if (boot_cpu_data.x86_model >= 0x3) {
+		/* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
+		clear_msr_range(0x3A0, 26);
+		clear_msr_range(0x3BC, 3);
+	} else {
+		clear_msr_range(0x3A0, 31);
+	}
+	clear_msr_range(0x3C0, 6);
+	clear_msr_range(0x3C8, 6);
+	clear_msr_range(0x3E0, 2);
+	clear_msr_range(MSR_P4_CCCR0, 18);
+	clear_msr_range(MSR_P4_PERFCTR0, 18);
+
+	wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
+	wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
+	Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz/nmi_hz*1000));
+	wrmsr(MSR_P4_IQ_COUNTER0, -(cpu_khz/nmi_hz*1000), -1);
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+	wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+	return 1;
+}
+
 void setup_apic_nmi_watchdog(void)
 {
 	switch (boot_cpu_data.x86_vendor) {
@@ -341,6 +425,13 @@
 			return;
 		setup_k7_watchdog();
 		break;
+	case X86_VENDOR_INTEL:
+		if (boot_cpu_data.x86 != 15)
+			return;
+		if (!setup_p4_watchdog())
+			return;
+		break;
+
 	default:
 		return;
 	}
@@ -355,56 +446,67 @@
  *
  * as these watchdog NMI IRQs are generated on every CPU, we only
  * have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up
- *  here too!]
  */
 
-static unsigned int
-	last_irq_sums [NR_CPUS],
-	alert_counter [NR_CPUS];
+static DEFINE_PER_CPU(unsigned, last_irq_sum);
+static DEFINE_PER_CPU(local_t, alert_counter);
+static DEFINE_PER_CPU(int, nmi_touch);
 
 void touch_nmi_watchdog (void)
 {
 	int i;
 
 	/*
-	 * Just reset the alert counters, (other CPUs might be
-	 * spinning on locks we hold):
+ 	 * Tell other CPUs to reset their alert counters. We cannot
+	 * do it ourselves because the alert count increase is not
+	 * atomic.
 	 */
 	for (i = 0; i < NR_CPUS; i++)
-		alert_counter[i] = 0;
+		per_cpu(nmi_touch, i) = 1;
 }
 
 void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason)
 {
-	int sum, cpu;
+	int sum;
+	int touched = 0;
 
-	cpu = safe_smp_processor_id();
 	sum = read_pda(apic_timer_irqs);
-	if (last_irq_sums[cpu] == sum) {
+	if (__get_cpu_var(nmi_touch)) {
+		__get_cpu_var(nmi_touch) = 0;
+		touched = 1;
+	}
+	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
 		/*
 		 * Ayiee, looks like this CPU is stuck ...
 		 * wait a few IRQs (5 seconds) before doing the oops ...
 		 */
-		alert_counter[cpu]++;
-		if (alert_counter[cpu] == 5*nmi_hz) {
+		local_inc(&__get_cpu_var(alert_counter));
+		if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) {
 			if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
 							== NOTIFY_STOP) {
-				alert_counter[cpu] = 0; 
+				local_set(&__get_cpu_var(alert_counter), 0);
 				return;
 			} 
 			die_nmi("NMI Watchdog detected LOCKUP on CPU%d", regs);
 		}
 	} else {
-		last_irq_sums[cpu] = sum;
-		alert_counter[cpu] = 0;
+		__get_cpu_var(last_irq_sum) = sum;
+		local_set(&__get_cpu_var(alert_counter), 0);
 	}
-	if (nmi_perfctr_msr)
+	if (nmi_perfctr_msr) {
+ 		if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
+ 			/*
+ 			 * P4 quirks:
+ 			 * - An overflown perfctr will assert its interrupt
+ 			 *   until the OVF flag in its CCCR is cleared.
+ 			 * - LVTPC is masked on interrupt and must be
+ 			 *   unmasked by the LVTPC handler.
+ 			 */
+ 			wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+ 			apic_write(APIC_LVTPC, APIC_DM_NMI);
+ 		}
 		wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1);
+	}
 }
 
 static int dummy_nmi_callback(struct pt_regs * regs, int cpu)
diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c
new file mode 100644
index 0000000..feb5f10
--- /dev/null
+++ b/arch/x86_64/kernel/pmtimer.c
@@ -0,0 +1,101 @@
+/* Ported over from i386 by AK, original copyright was:
+ *
+ * (C) Dominik Brodowski <linux@brodo.de> 2003
+ *
+ * Driver to use the Power Management Timer (PMTMR) available in some
+ * southbridges as primary timing source for the Linux kernel.
+ *
+ * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
+ * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
+ *
+ * This file is licensed under the GPL v2.
+ *
+ * Dropped all the hardware bug workarounds for now. Hopefully they
+ * are not needed on 64bit chipsets.
+ */
+
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <asm/io.h>
+#include <asm/proto.h>
+#include <asm/msr.h>
+#include <asm/vsyscall.h>
+
+/* The I/O port the PMTMR resides at.
+ * The location is detected during setup_arch(),
+ * in arch/i386/kernel/acpi/boot.c */
+u32 pmtmr_ioport;
+
+/* value of the Power timer at last timer interrupt */
+static u32 offset_delay;
+static u32 last_pmtmr_tick;
+
+#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */
+
+static inline u32 cyc2us(u32 cycles)
+{
+	/* The Power Management Timer ticks at 3.579545 ticks per microsecond.
+	 * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%]
+	 *
+	 * Even with HZ = 100, delta is at maximum 35796 ticks, so it can
+	 * easily be multiplied with 286 (=0x11E) without having to fear
+	 * u32 overflows.
+	 */
+	cycles *= 286;
+	return (cycles >> 10);
+}
+
+int pmtimer_mark_offset(void)
+{
+	static int first_run = 1;
+	unsigned long tsc;
+	u32 lost;
+
+	u32 tick = inl(pmtmr_ioport);
+	u32 delta;
+
+	delta = cyc2us((tick - last_pmtmr_tick) & ACPI_PM_MASK);
+
+	last_pmtmr_tick = tick;
+	monotonic_base += delta * NSEC_PER_USEC;
+
+	delta += offset_delay;
+
+	lost = delta / (USEC_PER_SEC / HZ);
+	offset_delay = delta % (USEC_PER_SEC / HZ);
+
+	rdtscll(tsc);
+	vxtime.last_tsc = tsc - offset_delay * cpu_khz;
+
+	/* don't calculate delay for first run,
+	   or if we've got less then a tick */
+	if (first_run || (lost < 1)) {
+		first_run = 0;
+		offset_delay = 0;
+	}
+
+	return lost - 1;
+}
+
+unsigned int do_gettimeoffset_pm(void)
+{
+	u32 now, offset, delta = 0;
+
+	offset = last_pmtmr_tick;
+	now = inl(pmtmr_ioport);
+	delta = (now - offset) & ACPI_PM_MASK;
+
+	return offset_delay + cyc2us(delta);
+}
+
+
+static int __init nopmtimer_setup(char *s)
+{
+	pmtmr_ioport = 0;
+	return 0;
+}
+
+__setup("nopmtimer", nopmtimer_setup);
diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c
index e26e86b..60dc9b9 100644
--- a/arch/x86_64/kernel/ptrace.c
+++ b/arch/x86_64/kernel/ptrace.c
@@ -257,13 +257,13 @@
 			value &= 0xffff;
 			return 0;
 		case offsetof(struct user_regs_struct,fs_base):
-			if (!((value >> 48) == 0 || (value >> 48) == 0xffff))
-				return -EIO; 
+			if (value >= TASK_SIZE)
+				return -EIO;
 			child->thread.fs = value;
 			return 0;
 		case offsetof(struct user_regs_struct,gs_base):
-			if (!((value >> 48) == 0 || (value >> 48) == 0xffff))
-				return -EIO; 
+			if (value >= TASK_SIZE)
+				return -EIO;
 			child->thread.gs = value;
 			return 0;
 		case offsetof(struct user_regs_struct, eflags):
@@ -277,6 +277,11 @@
 				return -EIO;
 			value &= 0xffff;
 			break;
+		case offsetof(struct user_regs_struct, rip):
+			/* Check if the new RIP address is canonical */
+			if (value >= TASK_SIZE)
+				return -EIO;
+			break;
 	}
 	put_stack_long(child, regno - sizeof(struct pt_regs), value);
 	return 0;
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 2129cf9..b9fd025 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -727,11 +727,12 @@
 static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_SMP
-	int cpu = c->x86_apicid;
+	int cpu = smp_processor_id();
 	int node = 0;
 	if (c->x86_num_cores == 1)
 		return;
-	cpu_core_id[cpu] = cpu >> hweight32(c->x86_num_cores - 1);
+	/* Fix up the APIC ID following the AMD specification. */
+ 	cpu_core_id[cpu] >>= hweight32(c->x86_num_cores - 1);
 
 #ifdef CONFIG_NUMA
 	/* When an ACPI SRAT table is available use the mappings from SRAT
@@ -745,6 +746,9 @@
 		node = cpu_to_node[cpu];
 	}
 #endif
+	/* For now: - better than BAD_APIC_ID at least*/
+	phys_proc_id[cpu] = cpu_core_id[cpu];
+
 	printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n",
 			cpu, c->x86_num_cores, node, cpu_core_id[cpu]);
 #endif
@@ -925,7 +929,6 @@
 	c->x86_clflush_size = 64;
 	c->x86_cache_alignment = c->x86_clflush_size;
 	c->x86_num_cores = 1;
-	c->x86_apicid = c == &boot_cpu_data ? 0 : c - cpu_data;
 	c->extended_cpuid_level = 0;
 	memset(&c->x86_capability, 0, sizeof c->x86_capability);
 
@@ -954,11 +957,15 @@
 		} 
 		if (c->x86_capability[0] & (1<<19)) 
 			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
-		c->x86_apicid = misc >> 24;
 	} else {
 		/* Have CPUID level 0 only - unheard of */
 		c->x86 = 4;
 	}
+
+#ifdef CONFIG_SMP
+	phys_proc_id[smp_processor_id()] =
+	cpu_core_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff;
+#endif
 }
 
 /*
@@ -1088,7 +1095,7 @@
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 		/* Other (Linux-defined) */
-		"cxmmx", NULL, "cyrix_arr", "centaur_mcr", "k8c+",
+		"cxmmx", NULL, "cyrix_arr", "centaur_mcr", NULL,
 		"constant_tsc", NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 73f7e8b..5abdee1 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -56,6 +56,7 @@
 #include <asm/kdebug.h>
 #include <asm/tlbflush.h>
 #include <asm/proto.h>
+#include <asm/nmi.h>
 
 /* Change for real CPU hotplug. Note other files need to be fixed
    first too. */
@@ -125,97 +126,211 @@
 
 	*c = boot_cpu_data;
 	identify_cpu(c);
+	print_cpu_info(c);
 }
 
 /*
- * Synchronize TSCs of CPUs
+ * New Funky TSC sync algorithm borrowed from IA64.
+ * Main advantage is that it doesn't reset the TSCs fully and
+ * in general looks more robust and it works better than my earlier
+ * attempts. I believe it was written by David Mosberger. Some minor
+ * adjustments for x86-64 by me -AK
  *
- * This new algorithm is less accurate than the old "zero TSCs"
- * one, but we cannot zero TSCs anymore in the new hotplug CPU
- * model.
+ * Original comment reproduced below.
+ *
+ * Synchronize TSC of the current (slave) CPU with the TSC of the
+ * MASTER CPU (normally the time-keeper CPU).  We use a closed loop to
+ * eliminate the possibility of unaccounted-for errors (such as
+ * getting a machine check in the middle of a calibration step).  The
+ * basic idea is for the slave to ask the master what itc value it has
+ * and to read its own itc before and after the master responds.  Each
+ * iteration gives us three timestamps:
+ *
+ *	slave		master
+ *
+ *	t0 ---\
+ *             ---\
+ *		   --->
+ *			tm
+ *		   /---
+ *	       /---
+ *	t1 <---
+ *
+ *
+ * The goal is to adjust the slave's TSC such that tm falls exactly
+ * half-way between t0 and t1.  If we achieve this, the clocks are
+ * synchronized provided the interconnect between the slave and the
+ * master is symmetric.  Even if the interconnect were asymmetric, we
+ * would still know that the synchronization error is smaller than the
+ * roundtrip latency (t0 - t1).
+ *
+ * When the interconnect is quiet and symmetric, this lets us
+ * synchronize the TSC to within one or two cycles.  However, we can
+ * only *guarantee* that the synchronization is accurate to within a
+ * round-trip time, which is typically in the range of several hundred
+ * cycles (e.g., ~500 cycles).  In practice, this means that the TSCs
+ * are usually almost perfectly synchronized, but we shouldn't assume
+ * that the accuracy is much better than half a micro second or so.
+ *
+ * [there are other errors like the latency of RDTSC and of the
+ * WRMSR. These can also account to hundreds of cycles. So it's
+ * probably worse. It claims 153 cycles error on a dual Opteron,
+ * but I suspect the numbers are actually somewhat worse -AK]
  */
 
-static atomic_t __cpuinitdata tsc_flag;
+#define MASTER	0
+#define SLAVE	(SMP_CACHE_BYTES/8)
+
+/* Intentionally don't use cpu_relax() while TSC synchronization
+   because we don't want to go into funky power save modi or cause
+   hypervisors to schedule us away.  Going to sleep would likely affect
+   latency and low latency is the primary objective here. -AK */
+#define no_cpu_relax() barrier()
+
 static __cpuinitdata DEFINE_SPINLOCK(tsc_sync_lock);
-static unsigned long long __cpuinitdata bp_tsc, ap_tsc;
+static volatile __cpuinitdata unsigned long go[SLAVE + 1];
+static int notscsync __cpuinitdata;
 
-#define NR_LOOPS 5
+#undef DEBUG_TSC_SYNC
 
-static void __cpuinit sync_tsc_bp_init(int init)
+#define NUM_ROUNDS	64	/* magic value */
+#define NUM_ITERS	5	/* likewise */
+
+/* Callback on boot CPU */
+static __cpuinit void sync_master(void *arg)
 {
-	if (init)
-		_raw_spin_lock(&tsc_sync_lock);
-	else
-		_raw_spin_unlock(&tsc_sync_lock);
-	atomic_set(&tsc_flag, 0);
-}
+	unsigned long flags, i;
 
-/*
- * Synchronize TSC on AP with BP.
- */
-static void __cpuinit __sync_tsc_ap(void)
-{
-	if (!cpu_has_tsc)
-		return;
-	Dprintk("AP %d syncing TSC\n", smp_processor_id());
-
-	while (atomic_read(&tsc_flag) != 0)
-		cpu_relax();
-	atomic_inc(&tsc_flag);
-	mb();
-	_raw_spin_lock(&tsc_sync_lock);
-	wrmsrl(MSR_IA32_TSC, bp_tsc);
-	_raw_spin_unlock(&tsc_sync_lock);
-	rdtscll(ap_tsc);
-	mb();
-	atomic_inc(&tsc_flag);
-	mb();
-}
-
-static void __cpuinit sync_tsc_ap(void)
-{
-	int i;
-	for (i = 0; i < NR_LOOPS; i++)
-		__sync_tsc_ap();
-}
-
-/*
- * Synchronize TSC from BP to AP.
- */
-static void __cpuinit __sync_tsc_bp(int cpu)
-{
-	if (!cpu_has_tsc)
+	if (smp_processor_id() != boot_cpu_id)
 		return;
 
-	/* Wait for AP */
-	while (atomic_read(&tsc_flag) == 0)
-		cpu_relax();
-	/* Save BPs TSC */
-	sync_core();
-	rdtscll(bp_tsc);
-	/* Don't do the sync core here to avoid too much latency. */
-	mb();
-	/* Start the AP */
-	_raw_spin_unlock(&tsc_sync_lock);
-	/* Wait for AP again */
-	while (atomic_read(&tsc_flag) < 2)
-		cpu_relax();
-	rdtscl(bp_tsc);
-	barrier();
-}
+	go[MASTER] = 0;
 
-static void __cpuinit sync_tsc_bp(int cpu)
-{
-	int i;
-	for (i = 0; i < NR_LOOPS - 1; i++) {
-		__sync_tsc_bp(cpu);
-		sync_tsc_bp_init(1);
+	local_irq_save(flags);
+	{
+		for (i = 0; i < NUM_ROUNDS*NUM_ITERS; ++i) {
+			while (!go[MASTER])
+				no_cpu_relax();
+			go[MASTER] = 0;
+			rdtscll(go[SLAVE]);
+		}
 	}
-	__sync_tsc_bp(cpu);
-	printk(KERN_INFO "Synced TSC of CPU %d difference %Ld\n",
-	       cpu, ap_tsc - bp_tsc);
+	local_irq_restore(flags);
 }
 
+/*
+ * Return the number of cycles by which our tsc differs from the tsc
+ * on the master (time-keeper) CPU.  A positive number indicates our
+ * tsc is ahead of the master, negative that it is behind.
+ */
+static inline long
+get_delta(long *rt, long *master)
+{
+	unsigned long best_t0 = 0, best_t1 = ~0UL, best_tm = 0;
+	unsigned long tcenter, t0, t1, tm;
+	int i;
+
+	for (i = 0; i < NUM_ITERS; ++i) {
+		rdtscll(t0);
+		go[MASTER] = 1;
+		while (!(tm = go[SLAVE]))
+			no_cpu_relax();
+		go[SLAVE] = 0;
+		rdtscll(t1);
+
+		if (t1 - t0 < best_t1 - best_t0)
+			best_t0 = t0, best_t1 = t1, best_tm = tm;
+	}
+
+	*rt = best_t1 - best_t0;
+	*master = best_tm - best_t0;
+
+	/* average best_t0 and best_t1 without overflow: */
+	tcenter = (best_t0/2 + best_t1/2);
+	if (best_t0 % 2 + best_t1 % 2 == 2)
+		++tcenter;
+	return tcenter - best_tm;
+}
+
+static __cpuinit void sync_tsc(void)
+{
+	int i, done = 0;
+	long delta, adj, adjust_latency = 0;
+	unsigned long flags, rt, master_time_stamp, bound;
+#if DEBUG_TSC_SYNC
+	static struct syncdebug {
+		long rt;	/* roundtrip time */
+		long master;	/* master's timestamp */
+		long diff;	/* difference between midpoint and master's timestamp */
+		long lat;	/* estimate of tsc adjustment latency */
+	} t[NUM_ROUNDS] __cpuinitdata;
+#endif
+
+	go[MASTER] = 1;
+
+	smp_call_function(sync_master, NULL, 1, 0);
+
+	while (go[MASTER])	/* wait for master to be ready */
+		no_cpu_relax();
+
+	spin_lock_irqsave(&tsc_sync_lock, flags);
+	{
+		for (i = 0; i < NUM_ROUNDS; ++i) {
+			delta = get_delta(&rt, &master_time_stamp);
+			if (delta == 0) {
+				done = 1;	/* let's lock on to this... */
+				bound = rt;
+			}
+
+			if (!done) {
+				unsigned long t;
+				if (i > 0) {
+					adjust_latency += -delta;
+					adj = -delta + adjust_latency/4;
+				} else
+					adj = -delta;
+
+				rdtscll(t);
+				wrmsrl(MSR_IA32_TSC, t + adj);
+			}
+#if DEBUG_TSC_SYNC
+			t[i].rt = rt;
+			t[i].master = master_time_stamp;
+			t[i].diff = delta;
+			t[i].lat = adjust_latency/4;
+#endif
+		}
+	}
+	spin_unlock_irqrestore(&tsc_sync_lock, flags);
+
+#if DEBUG_TSC_SYNC
+	for (i = 0; i < NUM_ROUNDS; ++i)
+		printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n",
+		       t[i].rt, t[i].master, t[i].diff, t[i].lat);
+#endif
+
+	printk(KERN_INFO
+	       "CPU %d: synchronized TSC with CPU %u (last diff %ld cycles, "
+	       "maxerr %lu cycles)\n",
+	       smp_processor_id(), boot_cpu_id, delta, rt);
+}
+
+static void __cpuinit tsc_sync_wait(void)
+{
+	if (notscsync || !cpu_has_tsc)
+		return;
+	printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", smp_processor_id(),
+			boot_cpu_id);
+	sync_tsc();
+}
+
+static __init int notscsync_setup(char *s)
+{
+	notscsync = 1;
+	return 0;
+}
+__setup("notscsync", notscsync_setup);
+
 static atomic_t init_deasserted __cpuinitdata;
 
 /*
@@ -315,11 +430,6 @@
 	cpu_init();
 	smp_callin();
 
-	/*
-	 * Synchronize the TSC with the BP
-	 */
-	sync_tsc_ap();
-
 	/* otherwise gcc will move up the smp_processor_id before the cpu_init */
 	barrier();
 
@@ -334,7 +444,6 @@
 		enable_8259A_irq(0);
 	}
 
-
 	enable_APIC_timer();
 
 	/*
@@ -343,6 +452,11 @@
 	cpu_set(smp_processor_id(), cpu_online_map);
 	mb();
 
+	/* Wait for TSC sync to not schedule things before.
+	   We still process interrupts, which could see an inconsistent
+	   time in that window unfortunately. */
+	tsc_sync_wait();
+
 	cpu_idle();
 }
 
@@ -531,7 +645,6 @@
 		printk("failed fork for CPU %d\n", cpu);
 		return PTR_ERR(idle);
 	}
-	x86_cpu_to_apicid[cpu] = apicid;
 
 	cpu_pda[cpu].pcurrent = idle;
 
@@ -600,8 +713,6 @@
 
 		if (cpu_isset(cpu, cpu_callin_map)) {
 			/* number CPUs logically, starting from 1 (BSP is 0) */
-			Dprintk("OK.\n");
-			print_cpu_info(&cpu_data[cpu]);
 			Dprintk("CPU has booted.\n");
 		} else {
 			boot_error = 1;
@@ -842,7 +953,6 @@
 		      GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_id);
 		/* Or can we switch back to PIC here? */
 	}
-	x86_cpu_to_apicid[0] = boot_cpu_id;
 
 	/*
 	 * Now start the IO-APICs
@@ -889,18 +999,14 @@
 		printk("__cpu_up: bad cpu %d\n", cpu);
 		return -EINVAL;
 	}
-	sync_tsc_bp_init(1);
 
 	/* Boot it! */
 	err = do_boot_cpu(cpu, apicid);
 	if (err < 0) {
-		sync_tsc_bp_init(0);
 		Dprintk("do_boot_cpu failed %d\n", err);
 		return err;
 	}
 
-	sync_tsc_bp(cpu);
-
 	/* Unleash the CPU! */
 	Dprintk("waiting for cpu %d\n", cpu);
 
@@ -923,4 +1029,6 @@
 
 	detect_siblings();
 	time_init_gtod();
+
+	check_nmi_watchdog();
 }
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 0e3b60e..735b676 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -26,6 +26,8 @@
 #include <linux/sysdev.h>
 #include <linux/bcd.h>
 #include <linux/kallsyms.h>
+#include <linux/acpi.h>
+#include <acpi/achware.h>	/* for PM timer frequency */
 #include <asm/8253pit.h>
 #include <asm/pgtable.h>
 #include <asm/vsyscall.h>
@@ -396,6 +398,10 @@
 			(offset - vxtime.last)*(NSEC_PER_SEC/HZ) / hpet_tick;
 
 		vxtime.last = offset;
+#ifdef CONFIG_X86_PM_TIMER
+	} else if (vxtime.mode == VXTIME_PMTMR) {
+		lost = pmtimer_mark_offset();
+#endif
 	} else {
 		offset = (((tsc - vxtime.last_tsc) *
 			   vxtime.tsc_quot) >> 32) - (USEC_PER_SEC / HZ);
@@ -898,6 +904,13 @@
 			hpet_period;
 		cpu_khz = hpet_calibrate_tsc();
 		timename = "HPET";
+#ifdef CONFIG_X86_PM_TIMER
+	} else if (pmtmr_ioport) {
+		vxtime_hz = PM_TIMER_FREQUENCY;
+		timename = "PM";
+		pit_init();
+		cpu_khz = pit_calibrate_tsc();
+#endif
 	} else {
 		pit_init();
 		cpu_khz = pit_calibrate_tsc();
@@ -923,35 +936,50 @@
 }
 
 /*
+ * Make an educated guess if the TSC is trustworthy and synchronized
+ * over all CPUs.
+ */
+static __init int unsynchronized_tsc(void)
+{
+#ifdef CONFIG_SMP
+	if (oem_force_hpet_timer())
+		return 1;
+ 	/* Intel systems are normally all synchronized. Exceptions
+ 	   are handled in the OEM check above. */
+ 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ 		return 0;
+ 	/* All in a single socket - should be synchronized */
+ 	if (cpus_weight(cpu_core_map[0]) == num_online_cpus())
+ 		return 0;
+#endif
+ 	/* Assume multi socket systems are not synchronized */
+ 	return num_online_cpus() > 1;
+}
+
+/*
  * Decide after all CPUs are booted what mode gettimeofday should use.
  */
 void __init time_init_gtod(void)
 {
 	char *timetype;
 
-	/*
-	 * AMD systems with more than one CPU don't have fully synchronized
-	 * TSCs. Always use HPET gettimeofday for these, although it is slower.
-	 * Intel SMP systems usually have synchronized TSCs, so use always
-	 * the TSC.
-	 *
-	 * Exceptions:
-	 * IBM Summit2 checked by oem_force_hpet_timer().
- 	 * AMD dual core may also not need HPET. Check me.
-	 *
-	 * Can be turned off with "notsc".
-	 */
-	if (num_online_cpus() > 1 &&
-	    boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
-		notsc = 1;
-	/* Some systems will want to disable TSC and use HPET. */
-	if (oem_force_hpet_timer())
+	if (unsynchronized_tsc())
 		notsc = 1;
 	if (vxtime.hpet_address && notsc) {
 		timetype = "HPET";
 		vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
 		vxtime.mode = VXTIME_HPET;
 		do_gettimeoffset = do_gettimeoffset_hpet;
+#ifdef CONFIG_X86_PM_TIMER
+	/* Using PM for gettimeofday is quite slow, but we have no other
+	   choice because the TSC is too unreliable on some systems. */
+	} else if (pmtmr_ioport && !vxtime.hpet_address && notsc) {
+		timetype = "PM";
+		do_gettimeoffset = do_gettimeoffset_pm;
+		vxtime.mode = VXTIME_PMTMR;
+		sysctl_vsyscall = 0;
+		printk(KERN_INFO "Disabling vsyscall due to use of PM timer\n");
+#endif
 	} else {
 		timetype = vxtime.hpet_address ? "HPET/TSC" : "PIT/TSC";
 		vxtime.mode = VXTIME_TSC;
diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c
index b4b8dc5..2e57344 100644
--- a/arch/x86_64/kernel/vsyscall.c
+++ b/arch/x86_64/kernel/vsyscall.c
@@ -65,7 +65,7 @@
 		usec = (__xtime.tv_nsec / 1000) +
 			(__jiffies - __wall_jiffies) * (1000000 / HZ);
 
-		if (__vxtime.mode == VXTIME_TSC) {
+		if (__vxtime.mode != VXTIME_HPET) {
 			sync_core();
 			rdtscll(t);
 			if (t < __vxtime.last_tsc)
@@ -217,8 +217,9 @@
 	BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime));
 	BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE)));
 	map_vsyscall();
-	sysctl_vsyscall = 1;
+#ifdef CONFIG_SYSCTL
 	register_sysctl_table(kernel_root_table2, 0);
+#endif
 	return 0;
 }
 
diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index e033092..5d6b211 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -234,6 +234,8 @@
 
 /*
  * Handle a fault on the vmalloc or module mapping area
+ *
+ * This assumes no large pages in there.
  */
 static int vmalloc_fault(unsigned long address)
 {
@@ -272,7 +274,10 @@
 	if (!pte_present(*pte_ref))
 		return -1;
 	pte = pte_offset_kernel(pmd, address);
-	if (!pte_present(*pte) || pte_page(*pte) != pte_page(*pte_ref))
+	/* Don't use pte_page here, because the mappings can point
+	   outside mem_map, and the NUMA hash lookup cannot handle
+	   that. */
+	if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
 		BUG();
 	__flush_tlb_all();
 	return 0;
@@ -346,7 +351,9 @@
 	 * protection error (error_code & 1) == 0.
 	 */
 	if (unlikely(address >= TASK_SIZE)) {
-		if (!(error_code & 5)) {
+		if (!(error_code & 5) &&
+		      ((address >= VMALLOC_START && address < VMALLOC_END) ||
+		       (address >= MODULES_VADDR && address < MODULES_END))) {
 			if (vmalloc_fault(address) < 0)
 				goto bad_area_nosemaphore;
 			return;
diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c
index 74ec855..c6fb0cb 100644
--- a/arch/x86_64/mm/ioremap.c
+++ b/arch/x86_64/mm/ioremap.c
@@ -272,7 +272,7 @@
 	if ((p->flags >> 20) &&
 		p->phys_addr + p->size - 1 < virt_to_phys(high_memory)) {
 		/* p->size includes the guard page, but cpa doesn't like that */
-		change_page_attr(virt_to_page(__va(p->phys_addr)),
+		change_page_attr_addr((unsigned long)__va(p->phys_addr),
 				 p->size >> PAGE_SHIFT,
 				 PAGE_KERNEL);
 		global_flush_tlb();
diff --git a/crypto/crypto_null.c b/crypto/crypto_null.c
index f691d31..3fcf6e8 100644
--- a/crypto/crypto_null.c
+++ b/crypto/crypto_null.c
@@ -21,6 +21,7 @@
 #include <linux/mm.h>
 #include <asm/scatterlist.h>
 #include <linux/crypto.h>
+#include <linux/string.h>
 
 #define NULL_KEY_SIZE		0
 #define NULL_BLOCK_SIZE		1
@@ -28,11 +29,13 @@
 
 static int null_compress(void *ctx, const u8 *src, unsigned int slen,
                          u8 *dst, unsigned int *dlen)
-{ return 0; }
-
-static int null_decompress(void *ctx, const u8 *src, unsigned int slen,
-                           u8 *dst, unsigned int *dlen)
-{ return 0; }
+{
+	if (slen > *dlen)
+		return -EINVAL;
+	memcpy(dst, src, slen);
+	*dlen = slen;
+	return 0;
+}
 
 static void null_init(void *ctx)
 { }
@@ -47,11 +50,10 @@
                        unsigned int keylen, u32 *flags)
 { return 0; }
 
-static void null_encrypt(void *ctx, u8 *dst, const u8 *src)
-{ }
-
-static void null_decrypt(void *ctx, u8 *dst, const u8 *src)
-{ }
+static void null_crypt(void *ctx, u8 *dst, const u8 *src)
+{
+	memcpy(dst, src, NULL_BLOCK_SIZE);
+}
 
 static struct crypto_alg compress_null = {
 	.cra_name		=	"compress_null",
@@ -62,7 +64,7 @@
 	.cra_list		=       LIST_HEAD_INIT(compress_null.cra_list),
 	.cra_u			=	{ .compress = {
 	.coa_compress 		=	null_compress,
-	.coa_decompress		=	null_decompress } }
+	.coa_decompress		=	null_compress } }
 };
 
 static struct crypto_alg digest_null = {
@@ -90,8 +92,8 @@
 	.cia_min_keysize	=	NULL_KEY_SIZE,
 	.cia_max_keysize	=	NULL_KEY_SIZE,
 	.cia_setkey		= 	null_setkey,
-	.cia_encrypt		=	null_encrypt,
-	.cia_decrypt		=	null_decrypt } }
+	.cia_encrypt		=	null_crypt,
+	.cia_decrypt		=	null_crypt } }
 };
 
 MODULE_ALIAS("compress_null");
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 6662b54..a47928a2 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -1,6 +1,6 @@
 # Makefile for the Linux device tree
 
-obj-y			:= core.o sys.o interface.o bus.o \
+obj-y			:= core.o sys.o bus.o \
 			   driver.o class.o class_simple.o platform.o \
 			   cpu.o firmware.o init.o map.o dmapool.o \
 			   attribute_container.o transport_class.o
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 2b3902c..3cb04bb 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -390,7 +390,6 @@
 		sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
 		sysfs_remove_link(&dev->kobj, "driver");
 		list_del_init(&dev->driver_list);
-		device_detach_shutdown(dev);
 		if (drv->remove)
 			drv->remove(dev);
 		dev->driver = NULL;
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 268a9c8..d21eb77 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -31,8 +31,6 @@
 #define to_dev(obj) container_of(obj, struct device, kobj)
 #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
 
-extern struct attribute * dev_default_attrs[];
-
 static ssize_t
 dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
 {
@@ -89,7 +87,6 @@
 static struct kobj_type ktype_device = {
 	.release	= device_release,
 	.sysfs_ops	= &dev_sysfs_ops,
-	.default_attrs	= dev_default_attrs,
 };
 
 
diff --git a/drivers/base/interface.c b/drivers/base/interface.c
deleted file mode 100644
index bd51584..0000000
--- a/drivers/base/interface.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * drivers/base/interface.c - common driverfs interface that's exported to
- * 	the world for all devices.
- *
- * Copyright (c) 2002-3 Patrick Mochel
- * Copyright (c) 2002-3 Open Source Development Labs
- *
- * This file is released under the GPLv2
- *
- */
-
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/stat.h>
-#include <linux/string.h>
-
-/**
- *	detach_state - control the default power state for the device.
- *
- *	This is the state the device enters when it's driver module is
- *	unloaded. The value is an unsigned integer, in the range of 0-4.
- *	'0' indicates 'On', so no action will be taken when the driver is
- *	unloaded. This is the default behavior.
- *	'4' indicates 'Off', meaning the driver core will call the driver's
- *	shutdown method to quiesce the device.
- *	1-3 indicate a low-power state for the device to enter via the
- *	driver's suspend method.
- */
-
-static ssize_t detach_show(struct device * dev, char * buf)
-{
-	return sprintf(buf, "%u\n", dev->detach_state);
-}
-
-static ssize_t detach_store(struct device * dev, const char * buf, size_t n)
-{
-	u32 state;
-	state = simple_strtoul(buf, NULL, 10);
-	if (state > 4)
-		return -EINVAL;
-	dev->detach_state = state;
-	return n;
-}
-
-static DEVICE_ATTR(detach_state, 0644, detach_show, detach_store);
-
-
-struct attribute * dev_default_attrs[] = {
-	&dev_attr_detach_state.attr,
-	NULL,
-};
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index e5eda74..2e700d7 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -1,18 +1,7 @@
-
-
-enum {
-	DEVICE_PM_ON,
-	DEVICE_PM1,
-	DEVICE_PM2,
-	DEVICE_PM3,
-	DEVICE_PM_OFF,
-};
-
 /*
  * shutdown.c
  */
 
-extern int device_detach_shutdown(struct device *);
 extern void device_shutdown(void);
 
 
diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c
index f8f5055..2646897 100644
--- a/drivers/base/power/resume.c
+++ b/drivers/base/power/resume.c
@@ -22,8 +22,17 @@
 
 int resume_device(struct device * dev)
 {
-	if (dev->bus && dev->bus->resume)
+	if (dev->power.pm_parent
+			&& dev->power.pm_parent->power.power_state) {
+		dev_err(dev, "PM: resume from %d, parent %s still %d\n",
+			dev->power.power_state,
+			dev->power.pm_parent->bus_id,
+			dev->power.pm_parent->power.power_state);
+	}
+	if (dev->bus && dev->bus->resume) {
+		dev_dbg(dev,"resuming\n");
 		return dev->bus->resume(dev);
+	}
 	return 0;
 }
 
diff --git a/drivers/base/power/shutdown.c b/drivers/base/power/shutdown.c
index d1e023f..f50a08b 100644
--- a/drivers/base/power/shutdown.c
+++ b/drivers/base/power/shutdown.c
@@ -19,20 +19,6 @@
 extern struct subsystem devices_subsys;
 
 
-int device_detach_shutdown(struct device * dev)
-{
-	if (!dev->detach_state)
-		return 0;
-
-	if (dev->detach_state == DEVICE_PM_OFF) {
-		if (dev->driver && dev->driver->shutdown)
-			dev->driver->shutdown(dev);
-		return 0;
-	}
-	return dpm_runtime_suspend(dev, dev->detach_state);
-}
-
-
 /**
  * We handle system devices differently - we suspend and shut them
  * down last and resume them first. That way, we don't do anything stupid like
@@ -52,13 +38,12 @@
 	struct device * dev;
 
 	down_write(&devices_subsys.rwsem);
-	list_for_each_entry_reverse(dev, &devices_subsys.kset.list, kobj.entry) {
-		pr_debug("shutting down %s: ", dev->bus_id);
+	list_for_each_entry_reverse(dev, &devices_subsys.kset.list,
+				kobj.entry) {
 		if (dev->driver && dev->driver->shutdown) {
-			pr_debug("Ok\n");
+			dev_dbg(dev, "shutdown\n");
 			dev->driver->shutdown(dev);
-		} else
-			pr_debug("Ignored.\n");
+		}
 	}
 	up_write(&devices_subsys.rwsem);
 
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index a0b5cf6..0ec44ef 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -39,12 +39,25 @@
 {
 	int error = 0;
 
-	dev_dbg(dev, "suspending\n");
+	if (dev->power.power_state) {
+		dev_dbg(dev, "PM: suspend %d-->%d\n",
+			dev->power.power_state, state);
+	}
+	if (dev->power.pm_parent
+			&& dev->power.pm_parent->power.power_state) {
+		dev_err(dev,
+			"PM: suspend %d->%d, parent %s already %d\n",
+			dev->power.power_state, state,
+			dev->power.pm_parent->bus_id,
+			dev->power.pm_parent->power.power_state);
+	}
 
 	dev->power.prev_state = dev->power.power_state;
 
-	if (dev->bus && dev->bus->suspend && !dev->power.power_state)
+	if (dev->bus && dev->bus->suspend && !dev->power.power_state) {
+		dev_dbg(dev, "suspending\n");
 		error = dev->bus->suspend(dev, state);
+	}
 
 	return error;
 }
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 82ccad0..b9a6b7a 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -914,8 +914,10 @@
 		bio = node->bio;
 		zone = ZONE(bio->bi_sector, pd);
 		list_for_each_entry(p, &pd->cdrw.pkt_active_list, list) {
-			if (p->sector == zone)
+			if (p->sector == zone) {
+				bio = NULL;
 				goto try_next_bio;
+			}
 		}
 		break;
 try_next_bio:
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index 131465e..ca5f42b 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -122,7 +122,7 @@
 {
 	struct block_device *bdev = filp->private_data;
 
-	return blkdev_ioctl(bdev->bd_inode, filp, command, arg);
+	return blkdev_ioctl(bdev->bd_inode, NULL, command, arg);
 }
 
 static void bind_device(struct raw_config_request *rq)
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
index c337978..b14d642 100644
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@@ -382,6 +382,7 @@
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE (pci, i8xx_tco_pci_tbl);
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index bdff5ac..4b1e43b 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -516,6 +516,6 @@
 
 void proc_ide_destroy(void)
 {
-	remove_proc_entry("ide/drivers", proc_ide_root);
+	remove_proc_entry("drivers", proc_ide_root);
 	remove_proc_entry("ide", NULL);
 }
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 78b201f..7d58af1 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -84,11 +84,6 @@
 	  To compile this driver as a module, say M here: the
 	  module will be called pcilynx.
 
-# Non-maintained pcilynx options
-# if [ "$CONFIG_IEEE1394_PCILYNX" != "n" ]; then
-#     bool '    Use PCILynx local RAM' CONFIG_IEEE1394_PCILYNX_LOCALRAM
-#     bool '    Support for non-IEEE1394 local ports' CONFIG_IEEE1394_PCILYNX_PORTS
-# fi
 config IEEE1394_OHCI1394
 	tristate "OHCI-1394 support"
 	depends on PCI && IEEE1394
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index 1c5845f..a294e45 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -520,7 +520,7 @@
 
 	if (!packet->no_waiter || packet->expect_response) {
 		atomic_inc(&packet->refcnt);
-		packet->sendtime = jiffies;
+		packet->sendtime = jiffies + 10 * HZ;
 		skb_queue_tail(&host->pending_packet_queue, packet->skb);
 	}
 
@@ -1248,7 +1248,6 @@
 EXPORT_SYMBOL(hpsb_make_isopacket);
 EXPORT_SYMBOL(hpsb_read);
 EXPORT_SYMBOL(hpsb_write);
-EXPORT_SYMBOL(hpsb_lock);
 EXPORT_SYMBOL(hpsb_packet_success);
 
 /** highlevel.c **/
diff --git a/drivers/ieee1394/ieee1394_transactions.c b/drivers/ieee1394/ieee1394_transactions.c
index 09908b95..0aa8763 100644
--- a/drivers/ieee1394/ieee1394_transactions.c
+++ b/drivers/ieee1394/ieee1394_transactions.c
@@ -535,6 +535,7 @@
         return retval;
 }
 
+#if 0
 
 int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation,
 	      u64 addr, int extcode, quadlet_t *data, quadlet_t arg)
@@ -599,3 +600,5 @@
 
 	return retval;
 }
+
+#endif  /*  0  */
diff --git a/drivers/ieee1394/ieee1394_transactions.h b/drivers/ieee1394/ieee1394_transactions.h
index 526a43c..45ba784 100644
--- a/drivers/ieee1394/ieee1394_transactions.h
+++ b/drivers/ieee1394/ieee1394_transactions.h
@@ -53,12 +53,5 @@
 	      u64 addr, quadlet_t *buffer, size_t length);
 int hpsb_write(struct hpsb_host *host, nodeid_t node, unsigned int generation,
 	       u64 addr, quadlet_t *buffer, size_t length);
-int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation,
-	      u64 addr, int extcode, quadlet_t *data, quadlet_t arg);
-int hpsb_lock64(struct hpsb_host *host, nodeid_t node, unsigned int generation,
-		u64 addr, int extcode, octlet_t *data, octlet_t arg);
-int hpsb_send_gasp(struct hpsb_host *host, int channel, unsigned int generation,
-                   quadlet_t *buffer, size_t length, u32 specifier_id,
-                   unsigned int version);
 
 #endif /* _IEEE1394_TRANSACTIONS_H */
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index a1e30a6..83e66ed 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1005,8 +1005,7 @@
 	return ud;
 
 unit_directory_error:
-	if (ud != NULL)
-		kfree(ud);
+	kfree(ud);
 	return NULL;
 }
 
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 6cb0b58..36e25ac 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -2931,7 +2931,7 @@
 		kfree(d->prg_cpu);
 		kfree(d->prg_bus);
 	}
-	if (d->spb) kfree(d->spb);
+	kfree(d->spb);
 
 	/* Mark this context as freed. */
 	d->ohci = NULL;
diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h
index d1758d4..cc66c1c 100644
--- a/drivers/ieee1394/ohci1394.h
+++ b/drivers/ieee1394/ohci1394.h
@@ -236,6 +236,9 @@
 
 static inline int cross_bound(unsigned long addr, unsigned int size)
 {
+	if (size == 0)
+		return 0;
+
 	if (size > PAGE_SIZE)
 		return 1;
 
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index a261d2b..bdb3a85 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -43,6 +43,7 @@
 #include <linux/fs.h>
 #include <linux/poll.h>
 #include <linux/kdev_t.h>
+#include <linux/dma-mapping.h>
 #include <asm/byteorder.h>
 #include <asm/atomic.h>
 #include <asm/io.h>
@@ -834,327 +835,6 @@
  * IEEE-1394 functionality section END *
  ***************************************/
 
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-/* VFS functions for local bus / aux device access.  Access to those
- * is implemented as a character device instead of block devices
- * because buffers are not wanted for this.  Therefore llseek (from
- * VFS) can be used for these char devices with obvious effects.
- */
-static int mem_open(struct inode*, struct file*);
-static int mem_release(struct inode*, struct file*);
-static unsigned int aux_poll(struct file*, struct poll_table_struct*);
-static loff_t mem_llseek(struct file*, loff_t, int);
-static ssize_t mem_read (struct file*, char*, size_t, loff_t*);
-static ssize_t mem_write(struct file*, const char*, size_t, loff_t*);
-
-
-static struct file_operations aux_ops = {
-	.owner =	THIS_MODULE,
-        .read =         mem_read,
-        .write =        mem_write,
-        .poll =         aux_poll,
-        .llseek =       mem_llseek,
-        .open =         mem_open,
-        .release =      mem_release,
-};
-
-
-static void aux_setup_pcls(struct ti_lynx *lynx)
-{
-        struct ti_pcl pcl;
-
-        pcl.next = PCL_NEXT_INVALID;
-        pcl.user_data = pcl_bus(lynx, lynx->dmem_pcl);
-        put_pcl(lynx, lynx->dmem_pcl, &pcl);
-}
-
-static int mem_open(struct inode *inode, struct file *file)
-{
-        int cid = iminor(inode);
-        enum { t_rom, t_aux, t_ram } type;
-        struct memdata *md;
-
-        if (cid < PCILYNX_MINOR_AUX_START) {
-                /* just for completeness */
-                return -ENXIO;
-        } else if (cid < PCILYNX_MINOR_ROM_START) {
-                cid -= PCILYNX_MINOR_AUX_START;
-                if (cid >= num_of_cards || !cards[cid].aux_port)
-                        return -ENXIO;
-                type = t_aux;
-        } else if (cid < PCILYNX_MINOR_RAM_START) {
-                cid -= PCILYNX_MINOR_ROM_START;
-                if (cid >= num_of_cards || !cards[cid].local_rom)
-                        return -ENXIO;
-                type = t_rom;
-        } else {
-                /* WARNING: Know what you are doing when opening RAM.
-                 * It is currently used inside the driver! */
-                cid -= PCILYNX_MINOR_RAM_START;
-                if (cid >= num_of_cards || !cards[cid].local_ram)
-                        return -ENXIO;
-                type = t_ram;
-        }
-
-        md = (struct memdata *)kmalloc(sizeof(struct memdata), SLAB_KERNEL);
-        if (md == NULL)
-                return -ENOMEM;
-
-        md->lynx = &cards[cid];
-        md->cid = cid;
-
-        switch (type) {
-        case t_rom:
-                md->type = rom;
-                break;
-        case t_ram:
-                md->type = ram;
-                break;
-        case t_aux:
-                atomic_set(&md->aux_intr_last_seen,
-                           atomic_read(&cards[cid].aux_intr_seen));
-                md->type = aux;
-                break;
-        }
-
-        file->private_data = md;
-
-        return 0;
-}
-
-static int mem_release(struct inode *inode, struct file *file)
-{
-        kfree(file->private_data);
-        return 0;
-}
-
-static unsigned int aux_poll(struct file *file, poll_table *pt)
-{
-        struct memdata *md = (struct memdata *)file->private_data;
-        int cid = md->cid;
-        unsigned int mask;
-
-        /* reading and writing is always allowed */
-        mask = POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM;
-
-        if (md->type == aux) {
-                poll_wait(file, &cards[cid].aux_intr_wait, pt);
-
-                if (atomic_read(&md->aux_intr_last_seen)
-                    != atomic_read(&cards[cid].aux_intr_seen)) {
-                        mask |= POLLPRI;
-                        atomic_inc(&md->aux_intr_last_seen);
-                }
-        }
-
-        return mask;
-}
-
-loff_t mem_llseek(struct file *file, loff_t offs, int orig)
-{
-        loff_t newoffs;
-
-        switch (orig) {
-        case 0:
-                newoffs = offs;
-                break;
-        case 1:
-                newoffs = offs + file->f_pos;
-                break;
-        case 2:
-                newoffs = PCILYNX_MAX_MEMORY + 1 + offs;
-                break;
-        default:
-                return -EINVAL;
-        }
-
-        if (newoffs < 0 || newoffs > PCILYNX_MAX_MEMORY + 1) return -EINVAL;
-
-        file->f_pos = newoffs;
-        return newoffs;
-}
-
-/*
- * do not DMA if count is too small because this will have a serious impact
- * on performance - the value 2400 was found by experiment and may not work
- * everywhere as good as here - use mem_mindma option for modules to change
- */
-static short mem_mindma = 2400;
-module_param(mem_mindma, short, 0444);
-MODULE_PARM_DESC(mem_mindma, "Minimum amount of data required to use DMA");
-
-static ssize_t mem_dmaread(struct memdata *md, u32 physbuf, ssize_t count,
-                           int offset)
-{
-        pcltmp_t pcltmp;
-        struct ti_pcl *pcl;
-        size_t retval;
-        int i;
-        DECLARE_WAITQUEUE(wait, current);
-
-        count &= ~3;
-        count = min(count, 53196);
-        retval = count;
-
-        if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
-            & DMA_CHAN_CTRL_BUSY) {
-                PRINT(KERN_WARNING, md->lynx->id, "DMA ALREADY ACTIVE!");
-        }
-
-        reg_write(md->lynx, LBUS_ADDR, md->type | offset);
-
-        pcl = edit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp);
-        pcl->buffer[0].control = PCL_CMD_LBUS_TO_PCI | min(count, 4092);
-        pcl->buffer[0].pointer = physbuf;
-        count -= 4092;
-
-        i = 0;
-        while (count > 0) {
-                i++;
-                pcl->buffer[i].control = min(count, 4092);
-                pcl->buffer[i].pointer = physbuf + i * 4092;
-                count -= 4092;
-        }
-        pcl->buffer[i].control |= PCL_LAST_BUFF;
-        commit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp);
-
-        set_current_state(TASK_INTERRUPTIBLE);
-        add_wait_queue(&md->lynx->mem_dma_intr_wait, &wait);
-        run_sub_pcl(md->lynx, md->lynx->dmem_pcl, 2, CHANNEL_LOCALBUS);
-
-        schedule();
-        while (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
-               & DMA_CHAN_CTRL_BUSY) {
-                if (signal_pending(current)) {
-                        retval = -EINTR;
-                        break;
-                }
-                schedule();
-        }
-
-        reg_write(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS), 0);
-        remove_wait_queue(&md->lynx->mem_dma_intr_wait, &wait);
-
-        if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
-            & DMA_CHAN_CTRL_BUSY) {
-                PRINT(KERN_ERR, md->lynx->id, "DMA STILL ACTIVE!");
-        }
-
-        return retval;
-}
-
-static ssize_t mem_read(struct file *file, char *buffer, size_t count,
-                        loff_t *offset)
-{
-        struct memdata *md = (struct memdata *)file->private_data;
-        ssize_t bcount;
-        size_t alignfix;
-	loff_t off = *offset; /* avoid useless 64bit-arithmetic */
-        ssize_t retval;
-        void *membase;
-
-        if ((off + count) > PCILYNX_MAX_MEMORY+1) {
-                count = PCILYNX_MAX_MEMORY+1 - off;
-        }
-        if (count == 0 || off > PCILYNX_MAX_MEMORY) {
-                return -ENOSPC;
-        }
-
-        switch (md->type) {
-        case rom:
-                membase = md->lynx->local_rom;
-                break;
-        case ram:
-                membase = md->lynx->local_ram;
-                break;
-        case aux:
-                membase = md->lynx->aux_port;
-                break;
-        default:
-                panic("pcilynx%d: unsupported md->type %d in %s",
-                      md->lynx->id, md->type, __FUNCTION__);
-        }
-
-        down(&md->lynx->mem_dma_mutex);
-
-        if (count < mem_mindma) {
-                memcpy_fromio(md->lynx->mem_dma_buffer, membase+off, count);
-                goto out;
-        }
-
-        bcount = count;
-        alignfix = 4 - (off % 4);
-        if (alignfix != 4) {
-                if (bcount < alignfix) {
-                        alignfix = bcount;
-                }
-                memcpy_fromio(md->lynx->mem_dma_buffer, membase+off,
-                              alignfix);
-                if (bcount == alignfix) {
-                        goto out;
-                }
-                bcount -= alignfix;
-                off += alignfix;
-        }
-
-        while (bcount >= 4) {
-                retval = mem_dmaread(md, md->lynx->mem_dma_buffer_dma
-                                     + count - bcount, bcount, off);
-                if (retval < 0) return retval;
-
-                bcount -= retval;
-                off += retval;
-        }
-
-        if (bcount) {
-                memcpy_fromio(md->lynx->mem_dma_buffer + count - bcount,
-                              membase+off, bcount);
-        }
-
- out:
-        retval = copy_to_user(buffer, md->lynx->mem_dma_buffer, count);
-        up(&md->lynx->mem_dma_mutex);
-
-	if (retval) return -EFAULT;
-        *offset += count;
-        return count;
-}
-
-
-static ssize_t mem_write(struct file *file, const char *buffer, size_t count,
-                         loff_t *offset)
-{
-        struct memdata *md = (struct memdata *)file->private_data;
-
-        if (((*offset) + count) > PCILYNX_MAX_MEMORY+1) {
-                count = PCILYNX_MAX_MEMORY+1 - *offset;
-        }
-        if (count == 0 || *offset > PCILYNX_MAX_MEMORY) {
-                return -ENOSPC;
-        }
-
-        /* FIXME: dereferencing pointers to PCI mem doesn't work everywhere */
-        switch (md->type) {
-        case aux:
-		if (copy_from_user(md->lynx->aux_port+(*offset), buffer, count))
-			return -EFAULT;
-                break;
-        case ram:
-		if (copy_from_user(md->lynx->local_ram+(*offset), buffer, count))
-			return -EFAULT;
-                break;
-        case rom:
-                /* the ROM may be writeable */
-		if (copy_from_user(md->lynx->local_rom+(*offset), buffer, count))
-			return -EFAULT;
-                break;
-        }
-
-        file->f_pos += count;
-        return count;
-}
-#endif /* CONFIG_IEEE1394_PCILYNX_PORTS */
-
 
 /********************************************************
  * Global stuff (interrupt handler, init/shutdown code) *
@@ -1181,18 +861,6 @@
         reg_write(lynx, LINK_INT_STATUS, linkint);
         reg_write(lynx, PCI_INT_STATUS, intmask);
 
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-        if (intmask & PCI_INT_AUX_INT) {
-                atomic_inc(&lynx->aux_intr_seen);
-                wake_up_interruptible(&lynx->aux_intr_wait);
-        }
-
-        if (intmask & PCI_INT_DMA_HLT(CHANNEL_LOCALBUS)) {
-                wake_up_interruptible(&lynx->mem_dma_intr_wait);
-        }
-#endif
-
-
         if (intmask & PCI_INT_1394) {
                 if (linkint & LINK_INT_PHY_TIMEOUT) {
                         PRINT(KERN_INFO, lynx->id, "PHY timeout occurred");
@@ -1484,15 +1152,9 @@
                 pci_free_consistent(lynx->dev, PAGE_SIZE, lynx->rcv_page,
                                     lynx->rcv_page_dma);
         case have_aux_buf:
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-                pci_free_consistent(lynx->dev, 65536, lynx->mem_dma_buffer,
-                                    lynx->mem_dma_buffer_dma);
-#endif
         case have_pcl_mem:
-#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM
                 pci_free_consistent(lynx->dev, LOCALRAM_SIZE, lynx->pcl_mem,
                                     lynx->pcl_mem_dma);
-#endif
         case clear:
                 /* do nothing - already freed */
                 ;
@@ -1524,7 +1186,7 @@
 
         error = -ENXIO;
 
-        if (pci_set_dma_mask(dev, 0xffffffff))
+        if (pci_set_dma_mask(dev, DMA_32BIT_MASK))
                 FAIL("DMA address limits not supported for PCILynx hardware");
         if (pci_enable_device(dev))
                 FAIL("failed to enable PCILynx hardware");
@@ -1546,7 +1208,6 @@
         spin_lock_init(&lynx->lock);
         spin_lock_init(&lynx->phy_reg_lock);
 
-#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM
         lynx->pcl_mem = pci_alloc_consistent(dev, LOCALRAM_SIZE,
                                              &lynx->pcl_mem_dma);
 
@@ -1558,16 +1219,6 @@
         } else {
                 FAIL("failed to allocate PCL memory area");
         }
-#endif
-
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-        lynx->mem_dma_buffer = pci_alloc_consistent(dev, 65536,
-                                                    &lynx->mem_dma_buffer_dma);
-        if (lynx->mem_dma_buffer == NULL) {
-                FAIL("failed to allocate DMA buffer for aux");
-        }
-        lynx->state = have_aux_buf;
-#endif
 
         lynx->rcv_page = pci_alloc_consistent(dev, PAGE_SIZE,
                                               &lynx->rcv_page_dma);
@@ -1597,13 +1248,6 @@
                 FAIL("failed to remap registers - card not accessible");
         }
 
-#ifdef CONFIG_IEEE1394_PCILYNX_LOCALRAM
-        if (lynx->local_ram == NULL) {
-                FAIL("failed to remap local RAM which is required for "
-                     "operation");
-        }
-#endif
-
         reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
         /* Fix buggy cards with autoboot pin not tied low: */
         reg_write(lynx, DMA0_CHAN_CTRL, 0);
@@ -1624,13 +1268,6 @@
 
         /* alloc_pcl return values are not checked, it is expected that the
          * provided PCL space is sufficient for the initial allocations */
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-        if (lynx->aux_port != NULL) {
-                lynx->dmem_pcl = alloc_pcl(lynx);
-                aux_setup_pcls(lynx);
-                sema_init(&lynx->mem_dma_mutex, 1);
-        }
-#endif
         lynx->rcv_pcl = alloc_pcl(lynx);
         lynx->rcv_pcl_start = alloc_pcl(lynx);
         lynx->async.pcl = alloc_pcl(lynx);
@@ -1647,12 +1284,6 @@
 
         reg_write(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
 
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-        reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_AUX_INT);
-        init_waitqueue_head(&lynx->mem_dma_intr_wait);
-        init_waitqueue_head(&lynx->aux_intr_wait);
-#endif
-
 	tasklet_init(&lynx->iso_rcv.tq, (void (*)(unsigned long))iso_rcv_bh,
 		     (unsigned long)lynx);
 
@@ -1944,37 +1575,18 @@
 {
         int ret;
 
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-        if (register_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME, &aux_ops)) {
-                PRINT_G(KERN_ERR, "allocation of char major number %d failed",
-                        PCILYNX_MAJOR);
-                return -EBUSY;
-        }
-#endif
-
         ret = pci_register_driver(&lynx_pci_driver);
         if (ret < 0) {
                 PRINT_G(KERN_ERR, "PCI module init failed");
-                goto free_char_dev;
+                return ret;
         }
 
         return 0;
-
- free_char_dev:
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-        unregister_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME);
-#endif
-
-        return ret;
 }
 
 static void __exit pcilynx_cleanup(void)
 {
         pci_unregister_driver(&lynx_pci_driver);
-
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-        unregister_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME);
-#endif
 }
 
 
diff --git a/drivers/ieee1394/pcilynx.h b/drivers/ieee1394/pcilynx.h
index 644ec55..d631aa8 100644
--- a/drivers/ieee1394/pcilynx.h
+++ b/drivers/ieee1394/pcilynx.h
@@ -55,16 +55,6 @@
         void __iomem *aux_port;
 	quadlet_t bus_info_block[5];
 
-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-        atomic_t aux_intr_seen;
-        wait_queue_head_t aux_intr_wait;
-
-        void *mem_dma_buffer;
-        dma_addr_t mem_dma_buffer_dma;
-        struct semaphore mem_dma_mutex;
-        wait_queue_head_t mem_dma_intr_wait;
-#endif
-
         /*
          * use local RAM of LOCALRAM_SIZE bytes for PCLs, which allows for
          * LOCALRAM_SIZE * 8 PCLs (each sized 128 bytes);
@@ -72,11 +62,9 @@
          */
         u8 pcl_bmap[LOCALRAM_SIZE / 1024];
 
-#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM
 	/* point to PCLs memory area if needed */
 	void *pcl_mem;
         dma_addr_t pcl_mem_dma;
-#endif
 
         /* PCLs for local mem / aux transfers */
         pcl_t dmem_pcl;
@@ -378,39 +366,6 @@
 #define pcloffs(MEMBER) (offsetof(struct ti_pcl, MEMBER))
 
 
-#ifdef CONFIG_IEEE1394_PCILYNX_LOCALRAM
-
-static inline void put_pcl(const struct ti_lynx *lynx, pcl_t pclid,
-                           const struct ti_pcl *pcl)
-{
-        int i;
-        u32 *in = (u32 *)pcl;
-        u32 *out = (u32 *)(lynx->local_ram + pclid * sizeof(struct ti_pcl));
-
-        for (i = 0; i < 32; i++, out++, in++) {
-                writel(*in, out);
-        }
-}
-
-static inline void get_pcl(const struct ti_lynx *lynx, pcl_t pclid,
-                           struct ti_pcl *pcl)
-{
-        int i;
-        u32 *out = (u32 *)pcl;
-        u32 *in = (u32 *)(lynx->local_ram + pclid * sizeof(struct ti_pcl));
-
-        for (i = 0; i < 32; i++, out++, in++) {
-                *out = readl(in);
-        }
-}
-
-static inline u32 pcl_bus(const struct ti_lynx *lynx, pcl_t pclid)
-{
-        return pci_resource_start(lynx->dev, 1) + pclid * sizeof(struct ti_pcl);
-}
-
-#else /* CONFIG_IEEE1394_PCILYNX_LOCALRAM */
-
 static inline void put_pcl(const struct ti_lynx *lynx, pcl_t pclid,
                            const struct ti_pcl *pcl)
 {
@@ -431,10 +386,8 @@
         return lynx->pcl_mem_dma + pclid * sizeof(struct ti_pcl);
 }
 
-#endif /* CONFIG_IEEE1394_PCILYNX_LOCALRAM */
 
-
-#if defined (CONFIG_IEEE1394_PCILYNX_LOCALRAM) || defined (__BIG_ENDIAN)
+#if defined (__BIG_ENDIAN)
 typedef struct ti_pcl pcltmp_t;
 
 static inline struct ti_pcl *edit_pcl(const struct ti_lynx *lynx, pcl_t pclid,
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index 4bedf71..d68c465 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -35,6 +35,11 @@
  *
  */
 
+/* Markus Tavenrath <speedygoo@speedygoo.de> :
+   - fixed checks for valid buffer-numbers in video1394_icotl
+   - changed the ways the dma prg's are used, now it's possible to use
+     even a single dma buffer
+*/
 #include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
@@ -112,6 +117,7 @@
 	struct it_dma_prg **it_prg;
 
 	unsigned int *buffer_status;
+	unsigned int *buffer_prg_assignment;
         struct timeval *buffer_time; /* time when the buffer was received */
 	unsigned int *last_used_cmd; /* For ISO Transmit with
 					variable sized packets only ! */
@@ -180,23 +186,14 @@
 		kfree(d->prg_reg);
 	}
 
-	if (d->ir_prg)
-		kfree(d->ir_prg);
-
-	if (d->it_prg)
-		kfree(d->it_prg);
-
-	if (d->buffer_status)
-		kfree(d->buffer_status);
-	if (d->buffer_time)
-		kfree(d->buffer_time);
-	if (d->last_used_cmd)
-		kfree(d->last_used_cmd);
-	if (d->next_buffer)
-		kfree(d->next_buffer);
-
+	kfree(d->ir_prg);
+	kfree(d->it_prg);
+	kfree(d->buffer_status);
+	kfree(d->buffer_prg_assignment);
+	kfree(d->buffer_time);
+	kfree(d->last_used_cmd);
+	kfree(d->next_buffer);
 	list_del(&d->link);
-
 	kfree(d);
 
 	return 0;
@@ -230,7 +227,7 @@
 	/* Init the regions for easy cleanup */
 	dma_region_init(&d->dma);
 
-	if (dma_region_alloc(&d->dma, d->num_desc * d->buf_size, ohci->dev,
+	if (dma_region_alloc(&d->dma, (d->num_desc - 1) * d->buf_size, ohci->dev,
 			     PCI_DMA_BIDIRECTIONAL)) {
 		PRINT(KERN_ERR, ohci->host->id, "Failed to allocate dma buffer");
 		free_dma_iso_ctx(d);
@@ -342,6 +339,8 @@
 
 	d->buffer_status = kmalloc(d->num_desc * sizeof(unsigned int),
 				   GFP_KERNEL);
+	d->buffer_prg_assignment = kmalloc(d->num_desc * sizeof(unsigned int),
+				   GFP_KERNEL);
 	d->buffer_time = kmalloc(d->num_desc * sizeof(struct timeval),
 				   GFP_KERNEL);
 	d->last_used_cmd = kmalloc(d->num_desc * sizeof(unsigned int),
@@ -354,6 +353,11 @@
 		free_dma_iso_ctx(d);
 		return NULL;
 	}
+	if (d->buffer_prg_assignment == NULL) {
+		PRINT(KERN_ERR, ohci->host->id, "Failed to allocate buffer_prg_assignment");
+		free_dma_iso_ctx(d);
+		return NULL;
+	}
 	if (d->buffer_time == NULL) {
 		PRINT(KERN_ERR, ohci->host->id, "Failed to allocate buffer_time");
 		free_dma_iso_ctx(d);
@@ -370,6 +374,7 @@
 		return NULL;
 	}
 	memset(d->buffer_status, 0, d->num_desc * sizeof(unsigned int));
+	memset(d->buffer_prg_assignment, 0, d->num_desc * sizeof(unsigned int));
 	memset(d->buffer_time, 0, d->num_desc * sizeof(struct timeval));
 	memset(d->last_used_cmd, 0, d->num_desc * sizeof(unsigned int));
 	memset(d->next_buffer, -1, d->num_desc * sizeof(int));
@@ -379,7 +384,7 @@
 	PRINT(KERN_INFO, ohci->host->id, "Iso %s DMA: %d buffers "
 	      "of size %d allocated for a frame size %d, each with %d prgs",
 	      (type == OHCI_ISO_RECEIVE) ? "receive" : "transmit",
-	      d->num_desc, d->buf_size, d->frame_size, d->nb_cmd);
+	      d->num_desc - 1, d->buf_size, d->frame_size, d->nb_cmd);
 
 	return d;
 }
@@ -394,11 +399,36 @@
 	d->ir_prg[n][i].status = cpu_to_le32(d->left_size);
 }
 
+static void reprogram_dma_ir_prg(struct dma_iso_ctx *d, int n, int buffer, int flags)
+{
+	struct dma_cmd *ir_prg = d->ir_prg[n];
+	unsigned long buf = (unsigned long)d->dma.kvirt + buffer * d->buf_size;
+	int i;
+
+	d->buffer_prg_assignment[n] = buffer;
+
+	ir_prg[0].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma, buf -
+  	                        (unsigned long)d->dma.kvirt));
+	ir_prg[1].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma,
+				(buf + 4) - (unsigned long)d->dma.kvirt));
+
+	for (i=2;i<d->nb_cmd-1;i++) {
+		ir_prg[i].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma,
+						(buf+(i-1)*PAGE_SIZE) -
+						(unsigned long)d->dma.kvirt));
+	}
+
+	ir_prg[i].control = cpu_to_le32(DMA_CTL_INPUT_MORE | DMA_CTL_UPDATE |
+				  DMA_CTL_IRQ | DMA_CTL_BRANCH | d->left_size);
+	ir_prg[i].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma,
+				  (buf+(i-1)*PAGE_SIZE) - (unsigned long)d->dma.kvirt));
+}
+
 static void initialize_dma_ir_prg(struct dma_iso_ctx *d, int n, int flags)
 {
 	struct dma_cmd *ir_prg = d->ir_prg[n];
 	struct dma_prog_region *ir_reg = &d->prg_reg[n];
-	unsigned long buf = (unsigned long)d->dma.kvirt + n * d->buf_size;
+	unsigned long buf = (unsigned long)d->dma.kvirt;
 	int i;
 
 	/* the first descriptor will read only 4 bytes */
@@ -508,7 +538,7 @@
 	for (i = 0; i < d->num_desc; i++) {
 		if (d->ir_prg[i][d->nb_cmd-1].status & cpu_to_le32(0xFFFF0000)) {
 			reset_ir_status(d, i);
-			d->buffer_status[i] = VIDEO1394_BUFFER_READY;
+			d->buffer_status[d->buffer_prg_assignment[i]] = VIDEO1394_BUFFER_READY;
 			do_gettimeofday(&d->buffer_time[i]);
 		}
 	}
@@ -585,7 +615,7 @@
 			int next = d->next_buffer[i];
 			put_timestamp(ohci, d, next);
 			d->it_prg[i][d->last_used_cmd[i]].end.status = 0;
-			d->buffer_status[i] = VIDEO1394_BUFFER_READY;
+			d->buffer_status[d->buffer_prg_assignment[i]] = VIDEO1394_BUFFER_READY;
 		}
 	}
 
@@ -595,11 +625,25 @@
 		wake_up_interruptible(&d->waitq);
 }
 
+static void reprogram_dma_it_prg(struct dma_iso_ctx  *d, int n, int buffer)
+{
+	struct it_dma_prg *it_prg = d->it_prg[n];
+	unsigned long buf = (unsigned long)d->dma.kvirt + buffer * d->buf_size;
+	int i;
+
+	d->buffer_prg_assignment[n] = buffer;
+	for (i=0;i<d->nb_cmd;i++) {
+	  it_prg[i].end.address =
+		cpu_to_le32(dma_region_offset_to_bus(&d->dma,
+			(buf+i*d->packet_size) - (unsigned long)d->dma.kvirt));
+	}
+}
+
 static void initialize_dma_it_prg(struct dma_iso_ctx *d, int n, int sync_tag)
 {
 	struct it_dma_prg *it_prg = d->it_prg[n];
 	struct dma_prog_region *it_reg = &d->prg_reg[n];
-	unsigned long buf = (unsigned long)d->dma.kvirt + n * d->buf_size;
+	unsigned long buf = (unsigned long)d->dma.kvirt;
 	int i;
 	d->last_used_cmd[n] = d->nb_cmd - 1;
 	for (i=0;i<d->nb_cmd;i++) {
@@ -796,7 +840,7 @@
 
 		if (cmd == VIDEO1394_IOC_LISTEN_CHANNEL) {
 			d = alloc_dma_iso_ctx(ohci, OHCI_ISO_RECEIVE,
-					      v.nb_buffers, v.buf_size,
+					      v.nb_buffers + 1, v.buf_size,
 					      v.channel, 0);
 
 			if (d == NULL) {
@@ -817,7 +861,7 @@
 		}
 		else {
 			d = alloc_dma_iso_ctx(ohci, OHCI_ISO_TRANSMIT,
-					      v.nb_buffers, v.buf_size,
+					      v.nb_buffers + 1, v.buf_size,
 					      v.channel, v.packet_size);
 
 			if (d == NULL) {
@@ -889,6 +933,7 @@
 	{
 		struct video1394_wait v;
 		struct dma_iso_ctx *d;
+		int next_prg;
 
 		if (copy_from_user(&v, argp, sizeof(v)))
 			return -EFAULT;
@@ -896,7 +941,7 @@
 		d = find_ctx(&ctx->context_list, OHCI_ISO_RECEIVE, v.channel);
 		if (d == NULL) return -EFAULT;
 
-		if ((v.buffer<0) || (v.buffer>d->num_desc)) {
+		if ((v.buffer<0) || (v.buffer>=d->num_desc - 1)) {
 			PRINT(KERN_ERR, ohci->host->id,
 			      "Buffer %d out of range",v.buffer);
 			return -EINVAL;
@@ -913,12 +958,14 @@
 
 		d->buffer_status[v.buffer]=VIDEO1394_BUFFER_QUEUED;
 
+		next_prg = (d->last_buffer + 1) % d->num_desc;
 		if (d->last_buffer>=0)
 			d->ir_prg[d->last_buffer][d->nb_cmd-1].branchAddress =
-				cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], 0)
+				cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[next_prg], 0)
 					& 0xfffffff0) | 0x1);
 
-		d->last_buffer = v.buffer;
+		d->last_buffer = next_prg;
+		reprogram_dma_ir_prg(d, d->last_buffer, v.buffer, d->flags);
 
 		d->ir_prg[d->last_buffer][d->nb_cmd-1].branchAddress = 0;
 
@@ -930,7 +977,7 @@
 
 			/* Tell the controller where the first program is */
 			reg_write(ohci, d->cmdPtr,
-				dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], 0) | 0x1);
+				  dma_prog_region_offset_to_bus(&d->prg_reg[d->last_buffer], 0) | 0x1);
 
 			/* Run IR context */
 			reg_write(ohci, d->ctrlSet, 0x8000);
@@ -951,7 +998,7 @@
 	{
 		struct video1394_wait v;
 		struct dma_iso_ctx *d;
-		int i;
+		int i = 0;
 
 		if (copy_from_user(&v, argp, sizeof(v)))
 			return -EFAULT;
@@ -959,7 +1006,7 @@
 		d = find_ctx(&ctx->context_list, OHCI_ISO_RECEIVE, v.channel);
 		if (d == NULL) return -EFAULT;
 
-		if ((v.buffer<0) || (v.buffer>d->num_desc)) {
+		if ((v.buffer<0) || (v.buffer>d->num_desc - 1)) {
 			PRINT(KERN_ERR, ohci->host->id,
 			      "Buffer %d out of range",v.buffer);
 			return -EINVAL;
@@ -1005,9 +1052,9 @@
 		 * Look ahead to see how many more buffers have been received
 		 */
 		i=0;
-		while (d->buffer_status[(v.buffer+1)%d->num_desc]==
+		while (d->buffer_status[(v.buffer+1)%(d->num_desc - 1)]==
 		       VIDEO1394_BUFFER_READY) {
-			v.buffer=(v.buffer+1)%d->num_desc;
+			v.buffer=(v.buffer+1)%(d->num_desc - 1);
 			i++;
 		}
 		spin_unlock_irqrestore(&d->lock, flags);
@@ -1023,6 +1070,7 @@
 		struct video1394_wait v;
 		unsigned int *psizes = NULL;
 		struct dma_iso_ctx *d;
+		int next_prg;
 
 		if (copy_from_user(&v, argp, sizeof(v)))
 			return -EFAULT;
@@ -1030,7 +1078,7 @@
 		d = find_ctx(&ctx->context_list, OHCI_ISO_TRANSMIT, v.channel);
 		if (d == NULL) return -EFAULT;
 
-		if ((v.buffer<0) || (v.buffer>d->num_desc)) {
+		if ((v.buffer<0) || (v.buffer>=d->num_desc - 1)) {
 			PRINT(KERN_ERR, ohci->host->id,
 			      "Buffer %d out of range",v.buffer);
 			return -EINVAL;
@@ -1056,19 +1104,19 @@
 
 		spin_lock_irqsave(&d->lock,flags);
 
+		// last_buffer is last_prg
+		next_prg = (d->last_buffer + 1) % d->num_desc;
 		if (d->buffer_status[v.buffer]!=VIDEO1394_BUFFER_FREE) {
 			PRINT(KERN_ERR, ohci->host->id,
 			      "Buffer %d is already used",v.buffer);
 			spin_unlock_irqrestore(&d->lock,flags);
-			if (psizes)
-				kfree(psizes);
+			kfree(psizes);
 			return -EBUSY;
 		}
 
 		if (d->flags & VIDEO1394_VARIABLE_PACKET_SIZE) {
 			initialize_dma_it_prg_var_packet_queue(
-				d, v.buffer, psizes,
-				ohci);
+				d, next_prg, psizes, ohci);
 		}
 
 		d->buffer_status[v.buffer]=VIDEO1394_BUFFER_QUEUED;
@@ -1076,16 +1124,17 @@
 		if (d->last_buffer >= 0) {
 			d->it_prg[d->last_buffer]
 				[ d->last_used_cmd[d->last_buffer] ].end.branchAddress =
-					cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer],
+					cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[next_prg],
 						0) & 0xfffffff0) | 0x3);
 
 			d->it_prg[d->last_buffer]
 				[ d->last_used_cmd[d->last_buffer] ].begin.branchAddress =
-					cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer],
+					cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[next_prg],
 						0) & 0xfffffff0) | 0x3);
-			d->next_buffer[d->last_buffer] = v.buffer;
+			d->next_buffer[d->last_buffer] = (v.buffer + 1) % (d->num_desc - 1);
 		}
-		d->last_buffer = v.buffer;
+		d->last_buffer = next_prg;
+		reprogram_dma_it_prg(d, d->last_buffer, v.buffer);
 		d->next_buffer[d->last_buffer] = -1;
 
 		d->it_prg[d->last_buffer][d->last_used_cmd[d->last_buffer]].end.branchAddress = 0;
@@ -1100,7 +1149,7 @@
 
 			/* Tell the controller where the first program is */
 			reg_write(ohci, d->cmdPtr,
-				dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], 0) | 0x3);
+				dma_prog_region_offset_to_bus(&d->prg_reg[next_prg], 0) | 0x3);
 
 			/* Run IT context */
 			reg_write(ohci, d->ctrlSet, 0x8000);
@@ -1116,9 +1165,7 @@
 			}
 		}
 
-		if (psizes)
-			kfree(psizes);
-
+		kfree(psizes);
 		return 0;
 
 	}
@@ -1133,7 +1180,7 @@
 		d = find_ctx(&ctx->context_list, OHCI_ISO_TRANSMIT, v.channel);
 		if (d == NULL) return -EFAULT;
 
-		if ((v.buffer<0) || (v.buffer>d->num_desc)) {
+		if ((v.buffer<0) || (v.buffer>=d->num_desc-1)) {
 			PRINT(KERN_ERR, ohci->host->id,
 			      "Buffer %d out of range",v.buffer);
 			return -EINVAL;
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index ff66ed4..79c332f 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -465,8 +465,10 @@
 			if (atkbd->softrepeat) return 0;
 
 			i = j = 0;
-			while (i < 32 && period[i] < dev->rep[REP_PERIOD]) i++;
-			while (j < 4 && delay[j] < dev->rep[REP_DELAY]) j++;
+			while (i < 31 && period[i] < dev->rep[REP_PERIOD])
+				i++;
+			while (j < 3 && delay[j] < dev->rep[REP_DELAY])
+				j++;
 			dev->rep[REP_PERIOD] = period[i];
 			dev->rep[REP_DELAY] = delay[j];
 			param[0] = i | (j << 5);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 1f85a97..42a9f7f 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -341,6 +341,8 @@
 	unsigned char param[4];
 	int version;
 
+	psmouse_reset(psmouse);
+
 	if (!(priv->i = alps_get_model(psmouse, &version)))
 		return -1;
 
@@ -395,7 +397,7 @@
 	}
 
 	if (param[0] & 0x04) {
-		printk(KERN_INFO "  Enabling hardware tapping\n");
+		printk(KERN_INFO "alps.c: Enabling hardware tapping\n");
 		if (alps_tap_mode(psmouse, 1))
 			printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
 	}
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 3313e2d..0beacb7 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -388,6 +388,24 @@
 	return sprintf(buf, "%02x\n", serio->id.extra);
 }
 
+static DEVICE_ATTR(type, S_IRUGO, serio_show_id_type, NULL);
+static DEVICE_ATTR(proto, S_IRUGO, serio_show_id_proto, NULL);
+static DEVICE_ATTR(id, S_IRUGO, serio_show_id_id, NULL);
+static DEVICE_ATTR(extra, S_IRUGO, serio_show_id_extra, NULL);
+
+static struct attribute *serio_device_id_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_proto.attr,
+	&dev_attr_id.attr,
+	&dev_attr_extra.attr,
+	NULL
+};
+
+static struct attribute_group serio_id_attr_group = {
+	.name	= "id",
+	.attrs	= serio_device_id_attrs,
+};
+
 static ssize_t serio_rebind_driver(struct device *dev, const char *buf, size_t count)
 {
 	struct serio *serio = to_serio_port(dev);
@@ -444,10 +462,6 @@
 
 static struct device_attribute serio_device_attrs[] = {
 	__ATTR(description, S_IRUGO, serio_show_description, NULL),
-	__ATTR(id_type, S_IRUGO, serio_show_id_type, NULL),
-	__ATTR(id_proto, S_IRUGO, serio_show_id_proto, NULL),
-	__ATTR(id_id, S_IRUGO, serio_show_id_id, NULL),
-	__ATTR(id_extra, S_IRUGO, serio_show_id_extra, NULL),
 	__ATTR(drvctl, S_IWUSR, NULL, serio_rebind_driver),
 	__ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode),
 	__ATTR_NULL
@@ -498,6 +512,7 @@
 	if (serio->start)
 		serio->start(serio);
 	device_add(&serio->dev);
+	sysfs_create_group(&serio->dev.kobj, &serio_id_attr_group);
 	serio->registered = 1;
 }
 
@@ -526,6 +541,7 @@
 	}
 
 	if (serio->registered) {
+		sysfs_remove_group(&serio->dev.kobj, &serio_id_attr_group);
 		device_del(&serio->dev);
 		list_del_init(&serio->node);
 		serio->registered = 0;
@@ -779,7 +795,6 @@
 	struct serio *serio = to_serio_port(dev);
 
 	if (!serio->drv || !serio->drv->reconnect || serio->drv->reconnect(serio)) {
-		serio_disconnect_port(serio);
 		/*
 		 * Driver re-probing can take a while, so better let kseriod
 		 * deal with it.
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 22f7368..f6b8522 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -27,11 +27,15 @@
 MODULE_ALIAS_LDISC(N_MOUSE);
 
 #define SERPORT_BUSY	1
+#define SERPORT_ACTIVE	2
+#define SERPORT_DEAD	3
 
 struct serport {
 	struct tty_struct *tty;
 	wait_queue_head_t wait;
 	struct serio *serio;
+	struct serio_device_id id;
+	spinlock_t lock;
 	unsigned long flags;
 };
 
@@ -45,11 +49,29 @@
 	return -(serport->tty->driver->write(serport->tty, &data, 1) != 1);
 }
 
+static int serport_serio_open(struct serio *serio)
+{
+	struct serport *serport = serio->port_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&serport->lock, flags);
+	set_bit(SERPORT_ACTIVE, &serport->flags);
+	spin_unlock_irqrestore(&serport->lock, flags);
+
+	return 0;
+}
+
+
 static void serport_serio_close(struct serio *serio)
 {
 	struct serport *serport = serio->port_data;
+	unsigned long flags;
 
-	serport->serio->id.type = 0;
+	spin_lock_irqsave(&serport->lock, flags);
+	clear_bit(SERPORT_ACTIVE, &serport->flags);
+	set_bit(SERPORT_DEAD, &serport->flags);
+	spin_unlock_irqrestore(&serport->lock, flags);
+
 	wake_up_interruptible(&serport->wait);
 }
 
@@ -61,36 +83,21 @@
 static int serport_ldisc_open(struct tty_struct *tty)
 {
 	struct serport *serport;
-	struct serio *serio;
-	char name[64];
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	serport = kmalloc(sizeof(struct serport), GFP_KERNEL);
-	serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
-	if (unlikely(!serport || !serio)) {
-		kfree(serport);
-		kfree(serio);
+	serport = kcalloc(1, sizeof(struct serport), GFP_KERNEL);
+	if (!serport)
 		return -ENOMEM;
-	}
 
-	memset(serport, 0, sizeof(struct serport));
-	serport->serio = serio;
-	set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 	serport->tty = tty;
-	tty->disc_data = serport;
-
-	memset(serio, 0, sizeof(struct serio));
-	strlcpy(serio->name, "Serial port", sizeof(serio->name));
-	snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty, name));
-	serio->id.type = SERIO_RS232;
-	serio->write = serport_serio_write;
-	serio->close = serport_serio_close;
-	serio->port_data = serport;
-
+	spin_lock_init(&serport->lock);
 	init_waitqueue_head(&serport->wait);
 
+	tty->disc_data = serport;
+	set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+
 	return 0;
 }
 
@@ -100,7 +107,8 @@
 
 static void serport_ldisc_close(struct tty_struct *tty)
 {
-	struct serport *serport = (struct serport*) tty->disc_data;
+	struct serport *serport = (struct serport *) tty->disc_data;
+
 	kfree(serport);
 }
 
@@ -116,9 +124,19 @@
 static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
 {
 	struct serport *serport = (struct serport*) tty->disc_data;
+	unsigned long flags;
 	int i;
+
+	spin_lock_irqsave(&serport->lock, flags);
+
+	if (!test_bit(SERPORT_ACTIVE, &serport->flags))
+		goto out;
+
 	for (i = 0; i < count; i++)
 		serio_interrupt(serport->serio, cp[i], 0, NULL);
+
+out:
+	spin_unlock_irqrestore(&serport->lock, flags);
 }
 
 /*
@@ -141,16 +159,33 @@
 static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, unsigned char __user * buf, size_t nr)
 {
 	struct serport *serport = (struct serport*) tty->disc_data;
+	struct serio *serio;
 	char name[64];
 
 	if (test_and_set_bit(SERPORT_BUSY, &serport->flags))
 		return -EBUSY;
 
+	serport->serio = serio = kcalloc(1, sizeof(struct serio), GFP_KERNEL);
+	if (!serio)
+		return -ENOMEM;
+
+	strlcpy(serio->name, "Serial port", sizeof(serio->name));
+	snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty, name));
+	serio->id = serport->id;
+	serio->id.type = SERIO_RS232;
+	serio->write = serport_serio_write;
+	serio->open = serport_serio_open;
+	serio->close = serport_serio_close;
+	serio->port_data = serport;
+
 	serio_register_port(serport->serio);
 	printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty, name));
-	wait_event_interruptible(serport->wait, !serport->serio->id.type);
-	serio_unregister_port(serport->serio);
 
+	wait_event_interruptible(serport->wait, test_bit(SERPORT_DEAD, &serport->flags));
+	serio_unregister_port(serport->serio);
+	serport->serio = NULL;
+
+	clear_bit(SERPORT_DEAD, &serport->flags);
 	clear_bit(SERPORT_BUSY, &serport->flags);
 
 	return 0;
@@ -163,16 +198,15 @@
 static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg)
 {
 	struct serport *serport = (struct serport*) tty->disc_data;
-	struct serio *serio = serport->serio;
 	unsigned long type;
 
 	if (cmd == SPIOCSTYPE) {
 		if (get_user(type, (unsigned long __user *) arg))
 			return -EFAULT;
 
-		serio->id.proto	= type & 0x000000ff;
-		serio->id.id	= (type & 0x0000ff00) >> 8;
-		serio->id.extra	= (type & 0x00ff0000) >> 16;
+		serport->id.proto = type & 0x000000ff;
+		serport->id.id	  = (type & 0x0000ff00) >> 8;
+		serport->id.extra = (type & 0x00ff0000) >> 16;
 
 		return 0;
 	}
@@ -182,9 +216,13 @@
 
 static void serport_ldisc_write_wakeup(struct tty_struct * tty)
 {
-	struct serport *sp = (struct serport *) tty->disc_data;
+	struct serport *serport = (struct serport *) tty->disc_data;
+	unsigned long flags;
 
-	serio_drv_write_wakeup(sp->serio);
+	spin_lock_irqsave(&serport->lock, flags);
+	if (test_bit(SERPORT_ACTIVE, &serport->flags))
+		serio_drv_write_wakeup(serport->serio);
+	spin_unlock_irqrestore(&serport->lock, flags);
 }
 
 /*
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 161e9aa..b1941b8 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -269,9 +269,8 @@
 		 * split it.
 		 */
 		struct bio_pair *bp;
-		bp = bio_split(bio, bio_split_pool, 
-			       (bio->bi_sector + (bio->bi_size >> 9) -
-				(tmp_dev->offset + tmp_dev->size))<<1);
+		bp = bio_split(bio, bio_split_pool,
+			       ((tmp_dev->offset + tmp_dev->size)<<1) - bio->bi_sector);
 		if (linear_make_request(q, &bp->bio1))
 			generic_make_request(&bp->bio1);
 		if (linear_make_request(q, &bp->bio2))
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 4e4bfde..2ae2d70 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -462,10 +462,6 @@
 	}
 	memset(conf->multipaths, 0, sizeof(struct multipath_info)*mddev->raid_disks);
 
-	mddev->queue->unplug_fn = multipath_unplug;
-
-	mddev->queue->issue_flush_fn = multipath_issue_flush;
-
 	conf->working_disks = 0;
 	ITERATE_RDEV(mddev,rdev,tmp) {
 		disk_idx = rdev->raid_disk;
@@ -528,6 +524,10 @@
 	 * Ok, everything is just fine now
 	 */
 	mddev->array_size = mddev->size;
+
+	mddev->queue->unplug_fn = multipath_unplug;
+	mddev->queue->issue_flush_fn = multipath_issue_flush;
+
 	return 0;
 
 out_free_conf:
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 83380b5..1db5de5 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1197,10 +1197,6 @@
 	if (!conf->r1bio_pool)
 		goto out_no_mem;
 
-	mddev->queue->unplug_fn = raid1_unplug;
-
-	mddev->queue->issue_flush_fn = raid1_issue_flush;
-
 	ITERATE_RDEV(mddev, rdev, tmp) {
 		disk_idx = rdev->raid_disk;
 		if (disk_idx >= mddev->raid_disks
@@ -1282,6 +1278,9 @@
 	 */
 	mddev->array_size = mddev->size;
 
+	mddev->queue->unplug_fn = raid1_unplug;
+	mddev->queue->issue_flush_fn = raid1_issue_flush;
+
 	return 0;
 
 out_no_mem:
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index e9dc287..3c37be6 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1639,9 +1639,6 @@
 			mdname(mddev));
 		goto out_free_conf;
 	}
-	mddev->queue->unplug_fn = raid10_unplug;
-
-	mddev->queue->issue_flush_fn = raid10_issue_flush;
 
 	ITERATE_RDEV(mddev, rdev, tmp) {
 		disk_idx = rdev->raid_disk;
@@ -1713,6 +1710,9 @@
 	mddev->array_size = size/2;
 	mddev->resync_max_sectors = size;
 
+	mddev->queue->unplug_fn = raid10_unplug;
+	mddev->queue->issue_flush_fn = raid10_issue_flush;
+
 	/* Calculate max read-ahead size.
 	 * We need to readahead at least twice a whole stripe....
 	 * maybe...
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e96e2a1..3cb11ac 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1620,9 +1620,6 @@
 	atomic_set(&conf->active_stripes, 0);
 	atomic_set(&conf->preread_active_stripes, 0);
 
-	mddev->queue->unplug_fn = raid5_unplug_device;
-	mddev->queue->issue_flush_fn = raid5_issue_flush;
-
 	PRINTK("raid5: run(%s) called.\n", mdname(mddev));
 
 	ITERATE_RDEV(mddev,rdev,tmp) {
@@ -1728,6 +1725,10 @@
 	}
 
 	/* Ok, everything is just fine now */
+
+	mddev->queue->unplug_fn = raid5_unplug_device;
+	mddev->queue->issue_flush_fn = raid5_issue_flush;
+
 	mddev->array_size =  mddev->size * (mddev->raid_disks - 1);
 	return 0;
 abort:
diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c
index 8a33f35..908edd7 100644
--- a/drivers/md/raid6main.c
+++ b/drivers/md/raid6main.c
@@ -1779,9 +1779,6 @@
 	atomic_set(&conf->active_stripes, 0);
 	atomic_set(&conf->preread_active_stripes, 0);
 
-	mddev->queue->unplug_fn = raid6_unplug_device;
-	mddev->queue->issue_flush_fn = raid6_issue_flush;
-
 	PRINTK("raid6: run(%s) called.\n", mdname(mddev));
 
 	ITERATE_RDEV(mddev,rdev,tmp) {
@@ -1895,6 +1892,9 @@
 
 	/* Ok, everything is just fine now */
 	mddev->array_size =  mddev->size * (mddev->raid_disks - 2);
+
+	mddev->queue->unplug_fn = raid6_unplug_device;
+	mddev->queue->issue_flush_fn = raid6_issue_flush;
 	return 0;
 abort:
 	if (conf) {
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 9f6c19a..50e8b86 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -23,9 +23,9 @@
 LIST_HEAD(saa7146_devices);
 DECLARE_MUTEX(saa7146_devices_lock);
 
-static int saa7146_num = 0;
+static int saa7146_num;
 
-unsigned int saa7146_debug = 0;
+unsigned int saa7146_debug;
 
 module_param(saa7146_debug, int, 0644);
 MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)");
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 883ec08..4983e1b 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -33,7 +33,7 @@
 source "drivers/media/dvb/cinergyT2/Kconfig"
 
 comment "Supported FlexCopII (B2C2) Adapters"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && (PCI || USB)
 source "drivers/media/dvb/b2c2/Kconfig"
 
 comment "Supported BT878 Adapters"
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 5259690..99bd675 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -1,3 +1,40 @@
+config DVB_B2C2_FLEXCOP
+	tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
+	depends on DVB_CORE
+	select DVB_STV0299
+	select DVB_MT352
+	select DVB_MT312
+	select DVB_NXT2002
+	select DVB_STV0297
+	help
+	  Support for the digital TV receiver chip made by B2C2 Inc. included in
+	  Technisats PCI cards and USB boxes.
+
+	  Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_FLEXCOP_PCI
+	tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
+	depends on DVB_B2C2_FLEXCOP && PCI
+	help
+	  Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
+
+	  Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_FLEXCOP_USB
+	tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
+	depends on DVB_B2C2_FLEXCOP && USB
+	help
+	  Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
+
+	  Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_FLEXCOP_DEBUG
+	bool "Enable debug for the B2C2 FlexCop drivers"
+	depends on DVB_B2C2_FLEXCOP
+	help
+	  Say Y if you want to enable the module option to control debug messages
+	  of all B2C2 FlexCop drivers.
+
 config DVB_B2C2_SKYSTAR
 	tristate "B2C2/Technisat Air/Sky/CableStar 2 PCI"
 	depends on DVB_CORE && PCI
@@ -11,16 +48,3 @@
 	  for the B2C2/BBTI Air2PC-ATSC card.
 
 	  Say Y if you own such a device and want to use it.
-
-config DVB_B2C2_USB
-	tristate "B2C2/Technisat Air/Sky/Cable2PC USB"
-	depends on DVB_CORE && USB && EXPERIMENTAL
-	select DVB_STV0299
-	select DVB_MT352
-	help
-	  Support for the Air/Sky/Cable2PC USB DVB device by B2C2. Currently
-	  the does nothing, but providing basic function for the used usb 
-	  protocol.
-
-	  Say Y if you own such a device and want to use it.
-
diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile
index 9fb1247..7703812 100644
--- a/drivers/media/dvb/b2c2/Makefile
+++ b/drivers/media/dvb/b2c2/Makefile
@@ -1,6 +1,14 @@
-obj-b2c2-usb = b2c2-usb-core.o b2c2-common.o
+b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \
+	flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o \
+	flexcop-dma.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o
+
+b2c2-flexcop-pci-objs = flexcop-pci.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o
+
+b2c2-flexcop-usb-objs = flexcop-usb.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o
 
 obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o
-obj-$(CONFIG_DVB_B2C2_USB) + = b2c2-usb.o
 
 EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/b2c2/b2c2-common.c b/drivers/media/dvb/b2c2/b2c2-common.c
deleted file mode 100644
index 000d60c4..0000000
--- a/drivers/media/dvb/b2c2/b2c2-common.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * b2c2-common.c - common methods for the B2C2/Technisat SkyStar2 PCI DVB card and
- *                 for the B2C2/Technisat Sky/Cable/AirStar USB devices
- *                 based on the FlexCopII/FlexCopIII by B2C2, Inc.
- *
- * Copyright (C) 2003  Vadim Catana, skystar@moldova.cc
- *
- * FIX: DISEQC Tone Burst in flexcop_diseqc_ioctl()
- * FIX: FULL soft DiSEqC for skystar2 (FlexCopII rev 130) VP310 equipped
- *     Vincenzo Di Massa, hawk.it at tiscalinet.it
- *
- * Converted to Linux coding style
- * Misc reorganization, polishing, restyling
- *     Roberto Ragusa, r.ragusa at libero.it
- *
- * Added hardware filtering support,
- *     Niklas Peinecke, peinecke at gdv.uni-hannover.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-#include "stv0299.h"
-#include "mt352.h"
-#include "mt312.h"
-
-static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-
-	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
-	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
-	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
-	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
-	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
-	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
-	stv0299_writereg (fe, 0x13, aclk);
-	stv0299_writereg (fe, 0x14, bclk);
-	stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg (fe, 0x20, (ratio >>  8) & 0xff);
-	stv0299_writereg (fe, 0x21, (ratio      ) & 0xf0);
-
-	return 0;
-}
-
-static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
-{
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-//	struct adapter* adapter = (struct adapter*) fe->dvb->priv;
-
-	div = params->frequency / 125;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x84;  // 0xC4
-	buf[3] = 0x08;
-
-	if (params->frequency < 1500000) buf[3] |= 0x10;
-
-//	if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO;
-	return 0;
-}
-
-static u8 samsung_tbmu24112_inittab[] = {
-	     0x01, 0x15,
-	     0x02, 0x30,
-	     0x03, 0x00,
-	     0x04, 0x7D,
-	     0x05, 0x35,
-	     0x06, 0x02,
-	     0x07, 0x00,
-	     0x08, 0xC3,
-	     0x0C, 0x00,
-	     0x0D, 0x81,
-	     0x0E, 0x23,
-	     0x0F, 0x12,
-	     0x10, 0x7E,
-	     0x11, 0x84,
-	     0x12, 0xB9,
-	     0x13, 0x88,
-	     0x14, 0x89,
-	     0x15, 0xC9,
-	     0x16, 0x00,
-	     0x17, 0x5C,
-	     0x18, 0x00,
-	     0x19, 0x00,
-	     0x1A, 0x00,
-	     0x1C, 0x00,
-	     0x1D, 0x00,
-	     0x1E, 0x00,
-	     0x1F, 0x3A,
-	     0x20, 0x2E,
-	     0x21, 0x80,
-	     0x22, 0xFF,
-	     0x23, 0xC1,
-	     0x28, 0x00,
-	     0x29, 0x1E,
-	     0x2A, 0x14,
-	     0x2B, 0x0F,
-	     0x2C, 0x09,
-	     0x2D, 0x05,
-	     0x31, 0x1F,
-	     0x32, 0x19,
-	     0x33, 0xFE,
-	     0x34, 0x93,
-	     0xff, 0xff,
-};
-
-static struct stv0299_config samsung_tbmu24112_config = {
-	.demod_address = 0x68,
-	.inittab = samsung_tbmu24112_inittab,
-	.mclk = 88000000UL,
-	.invert = 0,
-	.enhanced_tuning = 0,
-	.skip_reinit = 0,
-	.lock_output = STV0229_LOCKOUTPUT_LK,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
-   	.pll_set = samsung_tbmu24112_pll_set,
-};
-
-
-
-
-
-static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
-{
-	static u8 mt352_clock_config [] = { 0x89, 0x10, 0x2d };
-	static u8 mt352_reset [] = { 0x50, 0x80 };
-	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
-	static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
-	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
-	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
-	udelay(2000);
-	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
-	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-
-	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
-	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
-
-	return 0;
-}
-
-static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
-{
-	u32 div;
-	unsigned char bs = 0;
-
-	#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
-	div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-
-	if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
-	if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
-	if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
-
-	pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address
-	pllbuf[1] = div >> 8;
-   	pllbuf[2] = div & 0xff;
-   	pllbuf[3] = 0xcc;
-   	pllbuf[4] = bs;
-
-	return 0;
-}
-
-static struct mt352_config samsung_tdtc9251dh0_config = {
-
-	.demod_address = 0x0f,
-	.demod_init = samsung_tdtc9251dh0_demod_init,
-   	.pll_set = samsung_tdtc9251dh0_pll_set,
-};
-
-static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
-{
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-//	struct adapter* adapter = (struct adapter*) fe->dvb->priv;
-
-	div = (params->frequency + (125/2)) / 125;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = (div >> 0) & 0xff;
-	buf[2] = 0x84 | ((div >> 10) & 0x60);
-	buf[3] = 0x80;
-
-	if (params->frequency < 1550000)
-		buf[3] |= 0x02;
-
-	//if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO;
-	return 0;
-}
-
-static struct mt312_config skystar23_samsung_tbdu18132_config = {
-
-	.demod_address = 0x0e,
-   	.pll_set = skystar23_samsung_tbdu18132_pll_set,
-};
diff --git a/drivers/media/dvb/b2c2/b2c2-usb-core.c b/drivers/media/dvb/b2c2/b2c2-usb-core.c
deleted file mode 100644
index 9306da0..0000000
--- a/drivers/media/dvb/b2c2/b2c2-usb-core.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * Copyright (C) 2004 Patrick Boettcher <patrick.boettcher@desy.de>,
- *                    Luca Bertagnolio <>,
- *
- * based on information provided by John Jurrius from BBTI, Inc.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/usb.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include <linux/version.h>
-
-#include "dmxdev.h"
-#include "dvb_demux.h"
-#include "dvb_filter.h"
-#include "dvb_net.h"
-#include "dvb_frontend.h"
-
-/* debug */
-#define dprintk(level,args...) \
-	    do { if ((debug & level)) { printk(args); } } while (0)
-#define debug_dump(b,l) if (debug) {\
-	int i; deb_xfer("%s: %d > ",__FUNCTION__,l); \
-	for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \
-	deb_xfer("\n");\
-}
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4 (or-able)).");
-
-#define deb_info(args...) dprintk(0x01,args)
-#define deb_ts(args...)   dprintk(0x02,args)
-#define deb_ctrl(args...) dprintk(0x04,args)
-
-/* Version information */
-#define DRIVER_VERSION "0.0"
-#define DRIVER_DESC "Driver for B2C2/Technisat Air/Cable/Sky-2-PC USB devices"
-#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
-
-/* transfer parameters */
-#define B2C2_USB_FRAMES_PER_ISO		4
-#define B2C2_USB_NUM_ISO_URB		4    /* TODO check out a good value */
-
-#define B2C2_USB_CTRL_PIPE_IN		usb_rcvctrlpipe(b2c2->udev,0)
-#define B2C2_USB_CTRL_PIPE_OUT		usb_sndctrlpipe(b2c2->udev,0)
-#define B2C2_USB_DATA_PIPE			usb_rcvisocpipe(b2c2->udev,0x81)
-
-struct usb_b2c2_usb {
-	struct usb_device *udev;
-	struct usb_interface *uintf;
-
-	u8 *iso_buffer;
-	int buffer_size;
-	dma_addr_t iso_dma_handle;
-	struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
-};
-
-
-/*
- * USB
- * 10 90 34 12 78 56 04 00
- * usb_control_msg(udev, usb_sndctrlpipe(udev,0),
- * 0x90,
- * 0x10,
- * 0x1234,
- * 0x5678,
- * buf,
- * 4,
- * 5*HZ);
- *
- * extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
- * __u8 request,
- * __u8 requesttype,
- * __u16 value,
- * __u16 index,
- * void *data,
- * __u16 size,
- * int timeout);
- *
- */
-
-/* request types */
-typedef enum {
-
-/* something is wrong with this part
-	RTYPE_READ_DW         = (1 << 6),
-	RTYPE_WRITE_DW_1      = (3 << 6),
-	RTYPE_READ_V8_MEMORY  = (6 << 6),
-	RTYPE_WRITE_V8_MEMORY = (7 << 6),
-	RTYPE_WRITE_V8_FLASH  = (8 << 6),
-	RTYPE_GENERIC         = (9 << 6),
-*/
-	RTYPE_READ_DW = (3 << 6),
-	RTYPE_WRITE_DW_1 = (1 << 6),
-	
-	RTYPE_READ_V8_MEMORY  = (6 << 6),
-	RTYPE_WRITE_V8_MEMORY = (7 << 6),
-	RTYPE_WRITE_V8_FLASH  = (8 << 6),
-	RTYPE_GENERIC         = (9 << 6),
-} b2c2_usb_request_type_t;
-
-/* request */
-typedef enum {
-	B2C2_USB_WRITE_V8_MEM = 0x04,
-	B2C2_USB_READ_V8_MEM  = 0x05,
-	B2C2_USB_READ_REG     = 0x08,
-	B2C2_USB_WRITE_REG    = 0x0A,
-/*	B2C2_USB_WRITEREGLO   = 0x0A, */
-	B2C2_USB_WRITEREGHI   = 0x0B,
-	B2C2_USB_FLASH_BLOCK  = 0x10,
-	B2C2_USB_I2C_REQUEST  = 0x11,
-	B2C2_USB_UTILITY      = 0x12,
-} b2c2_usb_request_t;
-
-/* function definition for I2C_REQUEST */
-typedef enum {
-	USB_FUNC_I2C_WRITE       = 0x01,
-	USB_FUNC_I2C_MULTIWRITE  = 0x02,
-	USB_FUNC_I2C_READ        = 0x03,
-	USB_FUNC_I2C_REPEATWRITE = 0x04,
-	USB_FUNC_GET_DESCRIPTOR  = 0x05,
-	USB_FUNC_I2C_REPEATREAD  = 0x06,
-/* DKT 020208 - add this to support special case of DiSEqC */
-	USB_FUNC_I2C_CHECKWRITE  = 0x07,
-	USB_FUNC_I2C_CHECKRESULT = 0x08,
-} b2c2_usb_i2c_function_t;
-
-/*
- * function definition for UTILITY request 0x12
- * DKT 020304 - new utility function
- */
-typedef enum {
-	UTILITY_SET_FILTER          = 0x01,
-	UTILITY_DATA_ENABLE         = 0x02,
-	UTILITY_FLEX_MULTIWRITE     = 0x03,
-	UTILITY_SET_BUFFER_SIZE     = 0x04,
-	UTILITY_FLEX_OPERATOR       = 0x05,
-	UTILITY_FLEX_RESET300_START = 0x06,
-	UTILITY_FLEX_RESET300_STOP  = 0x07,
-	UTILITY_FLEX_RESET300       = 0x08,
-	UTILITY_SET_ISO_SIZE        = 0x09,
-	UTILITY_DATA_RESET          = 0x0A,
-	UTILITY_GET_DATA_STATUS     = 0x10,
-	UTILITY_GET_V8_REG          = 0x11,
-/* DKT 020326 - add function for v1.14 */
-	UTILITY_SRAM_WRITE          = 0x12,
-	UTILITY_SRAM_READ           = 0x13,
-	UTILITY_SRAM_TESTFILL       = 0x14,
-	UTILITY_SRAM_TESTSET        = 0x15,
-	UTILITY_SRAM_TESTVERIFY     = 0x16,
-} b2c2_usb_utility_function_t;
-
-#define B2C2_WAIT_FOR_OPERATION_RW  1  // 1 s
-#define B2C2_WAIT_FOR_OPERATION_RDW 3  // 3 s
-#define B2C2_WAIT_FOR_OPERATION_WDW 1  // 1 s
-
-#define B2C2_WAIT_FOR_OPERATION_V8READ   3  // 3 s
-#define B2C2_WAIT_FOR_OPERATION_V8WRITE  3  // 3 s
-#define B2C2_WAIT_FOR_OPERATION_V8FLASH  3  // 3 s
-
-/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
- * in the IBI address, to make the V8 code simpler.
- * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used)
- *                  in general: 0000 0HHH 000L LL00
- * IBI ADDRESS FORMAT:                    RHHH BLLL
- *
- * where R is the read(1)/write(0) bit, B is the busy bit
- * and HHH and LLL are the two sets of three bits from the PCI address.
- */
-#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
-#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
-
-/*
- * DKT 020228 - forget about this VENDOR_BUFFER_SIZE, read and write register
- * deal with DWORD or 4 bytes, that should be should from now on
- */
-static u32 b2c2_usb_read_dw(struct usb_b2c2_usb *b2c2, u16 wRegOffsPCI)
-{
-	u32 val;
-	u16 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | 0x0080;
-	int len = usb_control_msg(b2c2->udev,
-			B2C2_USB_CTRL_PIPE_IN,
-			B2C2_USB_READ_REG,
-			RTYPE_READ_DW,
-			wAddress,
-			0,
-			&val,
-			sizeof(u32),
-			B2C2_WAIT_FOR_OPERATION_RDW * 1000);
-
-	if (len != sizeof(u32)) {
-		err("error while reading dword from %d (%d).",wAddress,wRegOffsPCI);
-		return -EIO;
-	} else
-		return val;
-}
-
-/*
- * DKT 020228 - from now on, we don't support anything older than firm 1.00
- * I eliminated the write register as a 2 trip of writing hi word and lo word
- * and force this to write only 4 bytes at a time.
- * NOTE: this should work with all the firmware from 1.00 and newer
- */
-static int b2c2_usb_write_dw(struct usb_b2c2_usb *b2c2, u16 wRegOffsPCI, u32 val)
-{
-	u16 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI);
-	int len = usb_control_msg(b2c2->udev,
-			B2C2_USB_CTRL_PIPE_OUT,
-			B2C2_USB_WRITE_REG,
-			RTYPE_WRITE_DW_1,
-			wAddress,
-			0,
-			&val,
-			sizeof(u32),
-			B2C2_WAIT_FOR_OPERATION_RDW * 1000);
-
-	if (len != sizeof(u32)) {
-		err("error while reading dword from %d (%d).",wAddress,wRegOffsPCI);
-		return -EIO;
-	} else
-		return 0;
-}
-
-/*
- * DKT 010817 - add support for V8 memory read/write and flash update
- */
-static int b2c2_usb_v8_memory_req(struct usb_b2c2_usb *b2c2,
-		b2c2_usb_request_t req, u8 page, u16 wAddress,
-		u16 buflen, u8 *pbBuffer)
-{
-	u8 dwRequestType;
-	u16 wIndex;
-	int nWaitTime,pipe,len;
-
-	wIndex = page << 8;
-
-	switch (req) {
-		case B2C2_USB_READ_V8_MEM:
-			nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
-			dwRequestType = (u8) RTYPE_READ_V8_MEMORY;
-			pipe = B2C2_USB_CTRL_PIPE_IN;
-		break;
-		case B2C2_USB_WRITE_V8_MEM:
-			wIndex |= pbBuffer[0];
-			nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
-			dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY;
-			pipe = B2C2_USB_CTRL_PIPE_OUT;
-		break;
-		case B2C2_USB_FLASH_BLOCK:
-			nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
-			dwRequestType = (u8) RTYPE_WRITE_V8_FLASH;
-			pipe = B2C2_USB_CTRL_PIPE_OUT;
-		break;
-		default:
-			deb_info("unsupported request for v8_mem_req %x.\n",req);
-		return -EINVAL;
-	}
-	len = usb_control_msg(b2c2->udev,pipe,
-			req,
-			dwRequestType,
-			wAddress,
-			wIndex,
-			pbBuffer,
-			buflen,
-			nWaitTime * 1000);
-	return len == buflen ? 0 : -EIO;
-}
-
-static int b2c2_usb_i2c_req(struct usb_b2c2_usb *b2c2,
-		b2c2_usb_request_t req, b2c2_usb_i2c_function_t func,
-		u8 port, u8 chipaddr, u8 addr, u8 buflen, u8 *buf)
-{
-	u16 wValue, wIndex;
-	int nWaitTime,pipe,len;
-	u8 dwRequestType;
-
-	switch (func) {
-		case USB_FUNC_I2C_WRITE:
-		case USB_FUNC_I2C_MULTIWRITE:
-		case USB_FUNC_I2C_REPEATWRITE:
-		/* DKT 020208 - add this to support special case of DiSEqC */
-		case USB_FUNC_I2C_CHECKWRITE:
-			pipe = B2C2_USB_CTRL_PIPE_OUT;
-			nWaitTime = 2;
-			dwRequestType = (u8) RTYPE_GENERIC;
-		break;
-		case USB_FUNC_I2C_READ:
-		case USB_FUNC_I2C_REPEATREAD:
-			pipe = B2C2_USB_CTRL_PIPE_IN;
-			nWaitTime = 2;
-			dwRequestType = (u8) RTYPE_GENERIC;
-		break;
-		default:
-			deb_info("unsupported function for i2c_req %x\n",func);
-			return -EINVAL;
-	}
-	wValue = (func << 8 ) | port;
-	wIndex = (chipaddr << 8 ) | addr;
-
-	len = usb_control_msg(b2c2->udev,pipe,
-			req,
-			dwRequestType,
-			addr,
-			wIndex,
-			buf,
-			buflen,
-			nWaitTime * 1000);
-	return len == buflen ? 0 : -EIO;
-}
-
-int static b2c2_usb_utility_req(struct usb_b2c2_usb *b2c2, int set,
-		b2c2_usb_utility_function_t func, u8 extra, u16 wIndex,
-		u16 buflen, u8 *pvBuffer)
-{
-	u16 wValue;
-	int nWaitTime = 2,
-		pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN,
-		len;
-
-	wValue = (func << 8) | extra;
-
-	len = usb_control_msg(b2c2->udev,pipe,
-			B2C2_USB_UTILITY,
-			(u8) RTYPE_GENERIC,
-			wValue,
-			wIndex,
-			pvBuffer,
-			buflen,
-			nWaitTime * 1000);
-	return len == buflen ? 0 : -EIO;
-}
-
-
-
-static void b2c2_dumpfourreg(struct usb_b2c2_usb *b2c2, u16 offs)
-{
-	u32 r0,r1,r2,r3;
-	r0 = r1 = r2 = r3 = 0;
-	r0 = b2c2_usb_read_dw(b2c2,offs);
-	r1 = b2c2_usb_read_dw(b2c2,offs + 0x04);
-	r2 = b2c2_usb_read_dw(b2c2,offs + 0x08);
-	r3 = b2c2_usb_read_dw(b2c2,offs + 0x0c);
-	deb_ctrl("dump: offset: %03x, %08x, %08x, %08x, %08x\n",offs,r0,r1,r2,r3);
-}
-
-static void b2c2_urb_complete(struct urb *urb, struct pt_regs *ptregs)
-{
-	struct usb_b2c2_usb *b2c2 = urb->context;
-	deb_ts("urb completed, bufsize: %d\n",urb->transfer_buffer_length);
-
-//	urb_submit_urb(urb,GFP_ATOMIC); enable for real action
-}
-
-static void b2c2_exit_usb(struct usb_b2c2_usb *b2c2)
-{
-	int i;
-	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
-		if (b2c2->iso_urb[i] != NULL) { /* not sure about unlink_urb and iso-urbs TODO */
-			deb_info("unlinking/killing urb no. %d\n",i);
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,7)
-			usb_unlink_urb(b2c2->iso_urb[i]);
-#else
-			usb_kill_urb(b2c2->iso_urb[i]);
-#endif
-			usb_free_urb(b2c2->iso_urb[i]);
-		}
-
-	if (b2c2->iso_buffer != NULL)
-		pci_free_consistent(NULL,b2c2->buffer_size, b2c2->iso_buffer, b2c2->iso_dma_handle);
-
-}
-
-static int b2c2_init_usb(struct usb_b2c2_usb *b2c2)
-{
-	u16 frame_size = le16_to_cpu(b2c2->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
-	int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
-	int buffer_offset = 0;
-
-	deb_info("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
-			B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize);
-
-	b2c2->iso_buffer = pci_alloc_consistent(NULL,bufsize,&b2c2->iso_dma_handle);
-	if (b2c2->iso_buffer == NULL)
-		return -ENOMEM;
-	memset(b2c2->iso_buffer, 0, bufsize);
-	b2c2->buffer_size = bufsize;
-
-	/* creating iso urbs */
-	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
-		if (!(b2c2->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) {
-			ret = -ENOMEM;
-			goto urb_error;
-		}
-	/* initialising and submitting iso urbs */
-	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
-		int frame_offset = 0;
-		struct urb *urb = b2c2->iso_urb[i];
-		deb_info("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset);
-
-		urb->dev = b2c2->udev;
-		urb->context = b2c2;
-		urb->complete = b2c2_urb_complete;
-		urb->pipe = B2C2_USB_DATA_PIPE;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->interval = 1;
-		urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
-		urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
-		urb->transfer_buffer = b2c2->iso_buffer + buffer_offset;
-
-		buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
-		for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
-			deb_info("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset);
-			urb->iso_frame_desc[j].offset = frame_offset;
-			urb->iso_frame_desc[j].length = frame_size;
-			frame_offset += frame_size;
-		}
-
-		if ((ret = usb_submit_urb(b2c2->iso_urb[i],GFP_ATOMIC))) {
-			err("submitting urb %d failed with %d.",i,ret);
-			goto urb_error;
-		}
-		deb_info("submitted urb no. %d.\n",i);
-	}
-
-	ret = 0;
-	goto success;
-urb_error:
-	b2c2_exit_usb(b2c2);
-success:
-	return ret;
-}
-
-static int b2c2_usb_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct usb_b2c2_usb *b2c2 = NULL;
-	int ret;
-
-	b2c2 = kmalloc(sizeof(struct usb_b2c2_usb),GFP_KERNEL);
-	if (b2c2 == NULL) {
-		err("no memory");
-		return -ENOMEM;
-	}
-	b2c2->udev = udev;
-	b2c2->uintf = intf;
-
-	/* use the alternate setting with the larges buffer */
-	usb_set_interface(udev,0,1);
-
-	if ((ret = b2c2_init_usb(b2c2)))
-		goto usb_init_error;
-
-	usb_set_intfdata(intf,b2c2);
-
-	switch (udev->speed) {
-		case USB_SPEED_LOW:
-			err("cannot handle USB speed because it is to sLOW.");
-			break;
-		case USB_SPEED_FULL:
-			info("running at FULL speed.");
-			break;
-		case USB_SPEED_HIGH:
-			info("running at HIGH speed.");
-			break;
-		case USB_SPEED_UNKNOWN: /* fall through */
-		default:
-			err("cannot handle USB speed because it is unkown.");
-		break;
-	}
-
-	b2c2_dumpfourreg(b2c2,0x200);
-	b2c2_dumpfourreg(b2c2,0x300);
-	b2c2_dumpfourreg(b2c2,0x400);
-	b2c2_dumpfourreg(b2c2,0x700);
-
-
-	if (ret == 0)
-		info("%s successfully initialized and connected.",DRIVER_DESC);
-	else
-		info("%s error while loading driver (%d)",DRIVER_DESC,ret);
-
-	ret = 0;
-	goto success;
-
-usb_init_error:
-	kfree(b2c2);
-success:
-	return ret;
-}
-
-static void b2c2_usb_disconnect(struct usb_interface *intf)
-{
-	struct usb_b2c2_usb *b2c2 = usb_get_intfdata(intf);
-	usb_set_intfdata(intf,NULL);
-	if (b2c2 != NULL) {
-		b2c2_exit_usb(b2c2);
-		kfree(b2c2);
-	}
-	info("%s successfully deinitialized and disconnected.",DRIVER_DESC);
-
-}
-
-static struct usb_device_id b2c2_usb_table [] = {
-	    { USB_DEVICE(0x0af7, 0x0101) }
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver b2c2_usb_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "dvb_b2c2_usb",
-	.probe 		= b2c2_usb_probe,
-	.disconnect = b2c2_usb_disconnect,
-	.id_table 	= b2c2_usb_table,
-};
-
-/* module stuff */
-static int __init b2c2_usb_init(void)
-{
-	int result;
-	if ((result = usb_register(&b2c2_usb_driver))) {
-		err("usb_register failed. Error number %d",result);
-		return result;
-	}
-
-	return 0;
-}
-
-static void __exit b2c2_usb_exit(void)
-{
-	/* deregister this driver from the USB subsystem */
-	usb_deregister(&b2c2_usb_driver);
-}
-
-module_init (b2c2_usb_init);
-module_exit (b2c2_usb_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(usb, b2c2_usb_table);
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
new file mode 100644
index 0000000..773d158
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -0,0 +1,164 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-common.h - common header file for device-specific source files also.
+ *
+ * see flexcop.c for copyright information.
+ */
+#ifndef __FLEXCOP_COMMON_H__
+#define __FLEXCOP_COMMON_H__
+
+#include <linux/config.h>
+#include <linux/pci.h>
+
+#include "flexcop-reg.h"
+
+#include "dmxdev.h"
+#include "dvb_demux.h"
+#include "dvb_filter.h"
+#include "dvb_net.h"
+#include "dvb_frontend.h"
+
+#define FC_MAX_FEED 256
+
+#ifndef FC_LOG_PREFIX
+#warning please define a log prefix for your file, using a default one
+#define FC_LOG_PREFIX "b2c2-undef"
+#endif
+
+/* Steal from usb.h */
+#undef err
+#define err(format,  arg...) printk(KERN_ERR     FC_LOG_PREFIX ": " format "\n" , ## arg)
+#undef info
+#define info(format, arg...) printk(KERN_INFO    FC_LOG_PREFIX ": " format "\n" , ## arg)
+#undef warn
+#define warn(format, arg...) printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
+
+struct flexcop_dma {
+	struct pci_dev *pdev;
+
+	u8 *cpu_addr0;
+	dma_addr_t dma_addr0;
+	u8 *cpu_addr1;
+	dma_addr_t dma_addr1;
+	u32 size; /* size of each address in bytes */
+};
+
+/* Control structure for data definitions that are common to
+ * the B2C2-based PCI and USB devices.
+ */
+struct flexcop_device {
+	/* general */
+	struct device *dev; /* for firmware_class */
+
+#define FC_STATE_DVB_INIT 0x01
+#define FC_STATE_I2C_INIT 0x02
+#define FC_STATE_FE_INIT  0x04
+	int init_state;
+
+	/* device information */
+	int has_32_hw_pid_filter;
+	flexcop_revision_t rev;
+	flexcop_device_type_t dev_type;
+	flexcop_bus_t bus_type;
+
+	/* dvb stuff */
+	struct dvb_adapter dvb_adapter;
+	struct dvb_frontend *fe;
+	struct dvb_net dvbnet;
+	struct dvb_demux demux;
+	struct dmxdev dmxdev;
+	struct dmx_frontend hw_frontend;
+	struct dmx_frontend mem_frontend;
+	int (*fe_sleep) (struct dvb_frontend *);
+
+	struct i2c_adapter i2c_adap;
+	struct semaphore i2c_sem;
+
+	struct module *owner;
+
+	/* options and status */
+	int extra_feedcount;
+	int feedcount;
+	int pid_filtering;
+	int fullts_streaming_state;
+
+	/* bus specific callbacks */
+	flexcop_ibi_value (*read_ibi_reg)  (struct flexcop_device *, flexcop_ibi_register);
+	int               (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value);
+
+
+	int (*i2c_request) (struct flexcop_device*, flexcop_access_op_t, flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
+	int (*stream_control) (struct flexcop_device*, int);
+
+	int (*get_mac_addr) (struct flexcop_device *fc, int extended);
+
+	void *bus_specific;
+};
+
+/* exported prototypes */
+
+/* from flexcop.c */
+void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len);
+void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no);
+
+struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len);
+void flexcop_device_kfree(struct flexcop_device*);
+
+int  flexcop_device_initialize(struct flexcop_device*);
+void flexcop_device_exit(struct flexcop_device *fc);
+
+/* from flexcop-dma.c */
+int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size);
+void flexcop_dma_free(struct flexcop_dma *dma);
+
+int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
+int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
+int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
+int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index);
+int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
+int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets);
+
+/* from flexcop-eeprom.c */
+/* the PCI part uses this call to get the MAC address, the USB part has its own */
+int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended);
+
+/* from flexcop-i2c.c */
+/* the PCI part uses this a i2c_request callback, whereas the usb part has its own
+ * one. We have it in flexcop-i2c.c, because it is going via the actual
+ * I2C-channel of the flexcop.
+ */
+int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t,
+		        flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
+
+/* from flexcop-sram.c */
+int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);
+void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s);
+void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill);
+
+/* global prototypes for the flexcop-chip */
+/* from flexcop-fe-tuner.c */
+int flexcop_frontend_init(struct flexcop_device *card);
+void flexcop_frontend_exit(struct flexcop_device *fc);
+
+/* from flexcop-i2c.c */
+int flexcop_i2c_init(struct flexcop_device *fc);
+void flexcop_i2c_exit(struct flexcop_device *fc);
+
+/* from flexcop-sram.c */
+int flexcop_sram_init(struct flexcop_device *fc);
+
+/* from flexcop-misc.c */
+void flexcop_determine_revision(struct flexcop_device *fc);
+void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix);
+
+/* from flexcop-hw-filter.c */
+int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff);
+void flexcop_hw_filter_init(struct flexcop_device *fc);
+
+void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff);
+
+void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]);
+void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff);
+
+#endif
diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c
new file mode 100644
index 0000000..8d27060
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-dma.c
@@ -0,0 +1,149 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-dma.c - methods for configuring and controlling the DMA of the FlexCop.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size)
+{
+	u8 *tcpu;
+	dma_addr_t tdma;
+
+	if (size % 2) {
+		err("dma buffersize has to be even.");
+		return -EINVAL;
+	}
+
+	if ((tcpu = pci_alloc_consistent(pdev, size, &tdma)) != NULL) {
+		dma->pdev = pdev;
+		dma->cpu_addr0 = tcpu;
+		dma->dma_addr0 = tdma;
+		dma->cpu_addr1 = tcpu + size/2;
+		dma->dma_addr1 = tdma + size/2;
+		dma->size = size/2;
+		return 0;
+	}
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(flexcop_dma_allocate);
+
+void flexcop_dma_free(struct flexcop_dma *dma)
+{
+	pci_free_consistent(dma->pdev, dma->size*2,dma->cpu_addr0, dma->dma_addr0);
+	memset(dma,0,sizeof(struct flexcop_dma));
+}
+EXPORT_SYMBOL(flexcop_dma_free);
+
+int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
+{
+	flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
+
+	if (no & FC_DMA_1)
+		v.ctrl_208.DMA1_Timer_Enable_sig = onoff;
+
+	if (no & FC_DMA_2)
+		v.ctrl_208.DMA2_Timer_Enable_sig = onoff;
+
+	fc->write_ibi_reg(fc,ctrl_208,v);
+	return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_control_timer_irq);
+
+int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
+{
+	flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
+
+	if (no & FC_DMA_1)
+		v.ctrl_208.DMA1_IRQ_Enable_sig = onoff;
+
+	if (no & FC_DMA_2)
+		v.ctrl_208.DMA2_IRQ_Enable_sig = onoff;
+
+	fc->write_ibi_reg(fc,ctrl_208,v);
+	return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_control_size_irq);
+
+int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
+{
+	flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
+
+	if (no & FC_DMA_1)
+		v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff;
+
+	if (no & FC_DMA_2)
+		v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff;
+
+	fc->write_ibi_reg(fc,ctrl_208,v);
+	return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_control_packet_irq);
+
+int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index)
+{
+
+	flexcop_ibi_value v0x0,v0x4,v0xc;
+	v0x0.raw = v0x4.raw = v0xc.raw = 0;
+
+	v0x0.dma_0x0.dma_address0        = dma->dma_addr0 >> 2;
+	v0xc.dma_0xc.dma_address1        = dma->dma_addr1 >> 2;
+	v0x4.dma_0x4_write.dma_addr_size = dma->size / 4;
+
+	if (index & FC_DMA_SUBADDR_0)
+		v0x0.dma_0x0.dma_0start = 1;
+
+	if (index & FC_DMA_SUBADDR_1)
+		v0xc.dma_0xc.dma_1start = 1;
+
+	if (dma_idx & FC_DMA_1) {
+		fc->write_ibi_reg(fc,dma1_000,v0x0);
+		fc->write_ibi_reg(fc,dma1_004,v0x4);
+		fc->write_ibi_reg(fc,dma1_00c,v0xc);
+	} else { /* (dma_idx & FC_DMA_2) */
+		fc->write_ibi_reg(fc,dma2_010,v0x0);
+		fc->write_ibi_reg(fc,dma2_014,v0x4);
+		fc->write_ibi_reg(fc,dma2_01c,v0xc);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_config);
+
+static int flexcop_dma_remap(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, int onoff)
+{
+	flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c;
+	flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
+	v.dma_0xc.remap_enable = onoff;
+	fc->write_ibi_reg(fc,r,v);
+	return 0;
+}
+
+/* 1 cycles = 1.97 msec */
+int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles)
+{
+	flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
+	flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
+
+	flexcop_dma_remap(fc,dma_idx,0);
+
+	v.dma_0x4_write.dmatimer = cycles >> 1;
+	fc->write_ibi_reg(fc,r,v);
+	return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_config_timer);
+
+int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets)
+{
+	flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
+	flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
+
+	flexcop_dma_remap(fc,dma_idx,1);
+
+	v.dma_0x4_remap.DMA_maxpackets = packets;
+	fc->write_ibi_reg(fc,r,v);
+	return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_config_packet_count);
diff --git a/drivers/media/dvb/b2c2/flexcop-eeprom.c b/drivers/media/dvb/b2c2/flexcop-eeprom.c
new file mode 100644
index 0000000..bbcf070
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-eeprom.c
@@ -0,0 +1,153 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading is used)
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+#if 0
+/*EEPROM (Skystar2 has one "24LC08B" chip on board) */
+static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
+{
+	return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
+}
+
+static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries)
+{
+	int i;
+
+	for (i = 0; i < retries; i++) {
+		if (eeprom_write(adapter, addr, wbuf, len) == len) {
+			if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
+				return 1;
+		}
+	}
+
+	return 0;
+}
+
+/* These functions could be used to unlock SkyStar2 cards. */
+
+static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
+{
+	u8 rbuf[20];
+	u8 wbuf[20];
+
+	if (len != 16)
+		return 0;
+
+	memcpy(wbuf, key, len);
+
+	wbuf[16] = 0;
+	wbuf[17] = 0;
+	wbuf[18] = 0;
+	wbuf[19] = calc_lrc(wbuf, 19);
+
+	return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
+}
+
+static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
+{
+	u8 buf[20];
+
+	if (len != 16)
+		return 0;
+
+	if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0)
+		return 0;
+
+	memcpy(key, buf, len);
+
+	return 1;
+}
+
+static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
+{
+	u8 tmp[8];
+
+	if (type != 0) {
+		tmp[0] = mac[0];
+		tmp[1] = mac[1];
+		tmp[2] = mac[2];
+		tmp[3] = mac[5];
+		tmp[4] = mac[6];
+		tmp[5] = mac[7];
+
+	} else {
+
+		tmp[0] = mac[0];
+		tmp[1] = mac[1];
+		tmp[2] = mac[2];
+		tmp[3] = mac[3];
+		tmp[4] = mac[4];
+		tmp[5] = mac[5];
+	}
+
+	tmp[6] = 0;
+	tmp[7] = calc_lrc(tmp, 7);
+
+	if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
+		return 1;
+
+	return 0;
+}
+
+static int flexcop_eeprom_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len)
+{
+	return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
+}
+
+#endif
+
+static u8 calc_lrc(u8 *buf, int len)
+{
+	int i;
+	u8 sum = 0;
+	for (i = 0; i < len; i++)
+		sum = sum ^ buf[i];
+	return sum;
+}
+
+static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
+{
+	int i,ret = 0;
+	u8 chipaddr =  0x50 | ((addr >> 8) & 3);
+	for (i = 0; i < retries; i++)
+		if ((ret = fc->i2c_request(fc,op,FC_I2C_PORT_EEPROM,chipaddr,addr & 0xff,buf,len)) == 0)
+			break;
+	return ret;
+}
+
+static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries)
+{
+	int ret = flexcop_eeprom_request(fc,FC_READ,addr,buf,len,retries);
+	if (ret == 0)
+		if (calc_lrc(buf, len - 1) != buf[len - 1])
+			ret = -EINVAL;
+	return ret;
+}
+
+/* JJ's comment about extended == 1: it is not presently used anywhere but was
+ * added to the low-level functions for possible support of EUI64
+ */
+int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
+{
+	u8 buf[8];
+	int ret = 0;
+
+	if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
+		if (extended != 0) {
+			err("TODO: extended (EUI64) MAC addresses aren't completely supported yet");
+			ret = -EINVAL;
+/*			memcpy(fc->dvb_adapter.proposed_mac,buf,3);
+			mac[3] = 0xfe;
+			mac[4] = 0xff;
+			memcpy(&fc->dvb_adapter.proposed_mac[3],&buf[5],3); */
+		} else
+			memcpy(fc->dvb_adapter.proposed_mac,buf,6);
+	}
+	return ret;
+}
+EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr);
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
new file mode 100644
index 0000000..71be400
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -0,0 +1,403 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+#include "stv0299.h"
+#include "mt352.h"
+#include "nxt2002.h"
+#include "stv0297.h"
+#include "mt312.h"
+
+/* lnb control */
+
+static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+	struct flexcop_device *fc = fe->dvb->priv;
+	flexcop_ibi_value v;
+	deb_tuner("polarity/voltage = %u\n", voltage);
+
+	v = fc->read_ibi_reg(fc, misc_204);
+	switch (voltage) {
+		case SEC_VOLTAGE_OFF:
+			v.misc_204.ACPI1_sig = 1;
+			break;
+		case SEC_VOLTAGE_13:
+			v.misc_204.ACPI1_sig = 0;
+			v.misc_204.LNB_L_H_sig = 0;
+			break;
+		case SEC_VOLTAGE_18:
+			v.misc_204.ACPI1_sig = 0;
+			v.misc_204.LNB_L_H_sig = 1;
+			break;
+		default:
+			err("unknown SEC_VOLTAGE value");
+			return -EINVAL;
+	}
+	return fc->write_ibi_reg(fc, misc_204, v);
+}
+
+static int flexcop_sleep(struct dvb_frontend* fe)
+{
+	struct flexcop_device *fc = fe->dvb->priv;
+/*	flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
+
+	if (fc->fe_sleep)
+		return fc->fe_sleep(fe);
+
+/*	v.misc_204.ACPI3_sig = 1;
+	fc->write_ibi_reg(fc,misc_204,v);*/
+
+	return 0;
+}
+
+static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+	/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
+	struct flexcop_device *fc = fe->dvb->priv;
+	flexcop_ibi_value v;
+	u16 ax;
+	v.raw = 0;
+
+	deb_tuner("tone = %u\n",tone);
+
+	switch (tone) {
+		case SEC_TONE_ON:
+			ax = 0x01ff;
+			break;
+		case SEC_TONE_OFF:
+			ax = 0;
+			break;
+		default:
+			err("unknown SEC_TONE value");
+			return -EINVAL;
+	}
+
+	v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
+
+	v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
+	v.lnb_switch_freq_200.LNB_CTLLowCount_sig  = ax == 0 ? 0x1ff : ax;
+
+	return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
+}
+
+static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
+{
+	flexcop_set_tone(fe, SEC_TONE_ON);
+	udelay(data ? 500 : 1000);
+	flexcop_set_tone(fe, SEC_TONE_OFF);
+	udelay(data ? 1000 : 500);
+}
+
+static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
+{
+	int i, par = 1, d;
+
+	for (i = 7; i >= 0; i--) {
+		d = (data >> i) & 1;
+		par ^= d;
+		flexcop_diseqc_send_bit(fe, d);
+	}
+
+	flexcop_diseqc_send_bit(fe, par);
+}
+
+static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
+{
+	int i;
+
+	flexcop_set_tone(fe, SEC_TONE_OFF);
+	mdelay(16);
+
+	for (i = 0; i < len; i++)
+		flexcop_diseqc_send_byte(fe,msg[i]);
+
+	mdelay(16);
+
+	if (burst != -1) {
+		if (burst)
+			flexcop_diseqc_send_byte(fe, 0xff);
+		else {
+			flexcop_set_tone(fe, SEC_TONE_ON);
+			udelay(12500);
+			flexcop_set_tone(fe, SEC_TONE_OFF);
+		}
+		msleep(20);
+	}
+	return 0;
+}
+
+static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+	return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
+}
+
+static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+	return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
+}
+
+/* dvb-s stv0299 */
+static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+	stv0299_writereg (fe, 0x13, aclk);
+	stv0299_writereg (fe, 0x14, bclk);
+	stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg (fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg (fe, 0x21, (ratio      ) & 0xf0);
+
+	return 0;
+}
+
+static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+	u8 buf[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+	struct flexcop_device *fc = fe->dvb->priv;
+
+	div = params->frequency / 125;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0x84;  /* 0xC4 */
+	buf[3] = 0x08;
+
+	if (params->frequency < 1500000) buf[3] |= 0x10;
+
+	if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static u8 samsung_tbmu24112_inittab[] = {
+	     0x01, 0x15,
+	     0x02, 0x30,
+	     0x03, 0x00,
+	     0x04, 0x7D,
+	     0x05, 0x35,
+	     0x06, 0x02,
+	     0x07, 0x00,
+	     0x08, 0xC3,
+	     0x0C, 0x00,
+	     0x0D, 0x81,
+	     0x0E, 0x23,
+	     0x0F, 0x12,
+	     0x10, 0x7E,
+	     0x11, 0x84,
+	     0x12, 0xB9,
+	     0x13, 0x88,
+	     0x14, 0x89,
+	     0x15, 0xC9,
+	     0x16, 0x00,
+	     0x17, 0x5C,
+	     0x18, 0x00,
+	     0x19, 0x00,
+	     0x1A, 0x00,
+	     0x1C, 0x00,
+	     0x1D, 0x00,
+	     0x1E, 0x00,
+	     0x1F, 0x3A,
+	     0x20, 0x2E,
+	     0x21, 0x80,
+	     0x22, 0xFF,
+	     0x23, 0xC1,
+	     0x28, 0x00,
+	     0x29, 0x1E,
+	     0x2A, 0x14,
+	     0x2B, 0x0F,
+	     0x2C, 0x09,
+	     0x2D, 0x05,
+	     0x31, 0x1F,
+	     0x32, 0x19,
+	     0x33, 0xFE,
+	     0x34, 0x93,
+	     0xff, 0xff,
+};
+
+static struct stv0299_config samsung_tbmu24112_config = {
+	.demod_address = 0x68,
+	.inittab = samsung_tbmu24112_inittab,
+	.mclk = 88000000UL,
+	.invert = 0,
+	.enhanced_tuning = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0229_LOCKOUTPUT_LK,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
+	.pll_set = samsung_tbmu24112_pll_set,
+};
+
+/* dvb-t mt352 */
+static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
+{
+	static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
+	static u8 mt352_reset [] = { 0x50, 0x80 };
+	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+	static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
+	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+	udelay(2000);
+	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+
+	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+	return 0;
+}
+
+static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
+{
+	u32 div;
+	unsigned char bs = 0;
+
+	#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
+	div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+	if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
+	if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
+	if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
+
+	pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */
+	pllbuf[1] = div >> 8;
+	pllbuf[2] = div & 0xff;
+	pllbuf[3] = 0xcc;
+	pllbuf[4] = bs;
+
+	return 0;
+}
+
+static struct mt352_config samsung_tdtc9251dh0_config = {
+
+	.demod_address = 0x0f,
+	.demod_init = samsung_tdtc9251dh0_demod_init,
+	.pll_set = samsung_tdtc9251dh0_pll_set,
+};
+
+static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+	struct flexcop_device *fc = fe->dvb->priv;
+	return request_firmware(fw, name, fc->dev);
+}
+
+static struct nxt2002_config samsung_tbmv_config = {
+	.demod_address = 0x0a,
+	.request_firmware = nxt2002_request_firmware,
+};
+
+static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+	u8 buf[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+	struct flexcop_device *fc = fe->dvb->priv;
+
+	div = (params->frequency + (125/2)) / 125;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = (div >> 0) & 0xff;
+	buf[2] = 0x84 | ((div >> 10) & 0x60);
+	buf[3] = 0x80;
+
+	if (params->frequency < 1550000)
+		buf[3] |= 0x02;
+
+	if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static struct mt312_config skystar23_samsung_tbdu18132_config = {
+
+	.demod_address = 0x0e,
+	.pll_set = skystar23_samsung_tbdu18132_pll_set,
+};
+
+static struct stv0297_config alps_tdee4_stv0297_config = {
+	.demod_address = 0x1c,
+//	.invert = 1,
+//	.pll_set = alps_tdee4_stv0297_pll_set,
+};
+
+/* try to figure out the frontend, each card/box can have on of the following list */
+int flexcop_frontend_init(struct flexcop_device *fc)
+{
+	/* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
+	if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
+		fc->fe->ops->set_voltage = flexcop_set_voltage;
+
+		fc->fe_sleep             = fc->fe->ops->sleep;
+		fc->fe->ops->sleep       = flexcop_sleep;
+
+		fc->dev_type          = FC_SKY;
+		info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
+	} else
+	/* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
+	if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) {
+		fc->dev_type          = FC_AIR_DVB;
+		info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
+	} else
+	/* try the air atsc (nxt2002) */
+	if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
+		fc->dev_type          = FC_AIR_ATSC;
+		info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
+	} else
+	/* try the cable dvb (stv0297) */
+	if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) {
+		fc->dev_type                        = FC_CABLE;
+		info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
+	} else
+	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
+	if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+		fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+		fc->fe->ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
+		fc->fe->ops->set_tone               = flexcop_set_tone;
+		fc->fe->ops->set_voltage            = flexcop_set_voltage;
+
+		fc->fe_sleep                        = fc->fe->ops->sleep;
+		fc->fe->ops->sleep                  = flexcop_sleep;
+
+		fc->dev_type                        = FC_SKY_OLD;
+		info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
+	}
+
+	if (fc->fe == NULL) {
+		err("no frontend driver found for this B2C2/FlexCop adapter");
+		return -ENODEV;
+	} else {
+		if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
+			err("frontend registration failed!");
+			if (fc->fe->ops->release != NULL)
+				fc->fe->ops->release(fc->fe);
+			fc->fe = NULL;
+			return -EINVAL;
+		}
+	}
+	fc->init_state |= FC_STATE_FE_INIT;
+	return 0;
+}
+
+void flexcop_frontend_exit(struct flexcop_device *fc)
+{
+	if (fc->init_state & FC_STATE_FE_INIT)
+		dvb_unregister_frontend(fc->fe);
+
+	fc->init_state &= ~FC_STATE_FE_INIT;
+}
diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
new file mode 100644
index 0000000..2baf43d
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
@@ -0,0 +1,204 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-hw-filter.c - pid and mac address filtering and corresponding control functions.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff)
+{
+	flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff);
+}
+
+void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff)
+{
+	flexcop_set_ibi_value(ctrl_208,SMC_Enable_sig,onoff);
+}
+
+void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff)
+{
+	flexcop_set_ibi_value(ctrl_208,Null_filter_sig,onoff);
+}
+
+void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6])
+{
+	flexcop_ibi_value v418,v41c;
+	v41c = fc->read_ibi_reg(fc,mac_address_41c);
+
+	v418.mac_address_418.MAC1 = mac[0];
+	v418.mac_address_418.MAC2 = mac[1];
+	v418.mac_address_418.MAC3 = mac[2];
+	v418.mac_address_418.MAC6 = mac[3];
+	v41c.mac_address_41c.MAC7 = mac[4];
+	v41c.mac_address_41c.MAC8 = mac[5];
+
+	fc->write_ibi_reg(fc,mac_address_418,v418);
+	fc->write_ibi_reg(fc,mac_address_41c,v41c);
+}
+
+void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff)
+{
+	flexcop_set_ibi_value(ctrl_208,MAC_filter_Mode_sig,onoff);
+}
+
+static void flexcop_pid_group_filter(struct flexcop_device *fc, u16 pid, u16 mask)
+{
+	/* index_reg_310.extra_index_reg need to 0 or 7 to work */
+	flexcop_ibi_value v30c;
+	v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid;
+	v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask;
+	fc->write_ibi_reg(fc,pid_filter_30c,v30c);
+}
+
+static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff)
+{
+	flexcop_set_ibi_value(ctrl_208,Mask_filter_sig,onoff);
+}
+
+/* this fancy define reduces the code size of the quite similar PID controlling of
+ * the first 6 PIDs
+ */
+
+#define pid_ctrl(vregname,field,enablefield,trans_field,transval) \
+	flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \
+					  v208 = fc->read_ibi_reg(fc, ctrl_208); \
+\
+	vpid.vregname.field = onoff ? pid : 0x1fff; \
+	vpid.vregname.trans_field = transval; \
+	v208.ctrl_208.enablefield = onoff; \
+\
+	fc->write_ibi_reg(fc,vregname,vpid); \
+	fc->write_ibi_reg(fc,ctrl_208,v208);
+
+static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+	pid_ctrl(pid_filter_300,Stream1_PID,Stream1_filter_sig,Stream1_trans,0);
+}
+
+static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+	pid_ctrl(pid_filter_300,Stream2_PID,Stream2_filter_sig,Stream2_trans,0);
+}
+
+static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+	pid_ctrl(pid_filter_304,PCR_PID,PCR_filter_sig,PCR_trans,0);
+}
+
+static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+	pid_ctrl(pid_filter_304,PMT_PID,PMT_filter_sig,PMT_trans,0);
+}
+
+static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+	pid_ctrl(pid_filter_308,EMM_PID,EMM_filter_sig,EMM_trans,0);
+}
+
+static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+{
+	pid_ctrl(pid_filter_308,ECM_PID,ECM_filter_sig,ECM_trans,0);
+}
+
+static void flexcop_pid_control(struct flexcop_device *fc, int index, u16 pid,int onoff)
+{
+	if (pid == 0x2000)
+		return;
+
+	deb_ts("setting pid: %5d %04x at index %d '%s'\n",pid,pid,index,onoff ? "on" : "off");
+
+	/* We could use bit magic here to reduce source code size.
+	 * I decided against it, but to use the real register names */
+	switch (index) {
+		case 0: flexcop_pid_Stream1_PID_ctrl(fc,pid,onoff); break;
+		case 1: flexcop_pid_Stream2_PID_ctrl(fc,pid,onoff); break;
+		case 2: flexcop_pid_PCR_PID_ctrl(fc,pid,onoff); break;
+		case 3: flexcop_pid_PMT_PID_ctrl(fc,pid,onoff); break;
+		case 4: flexcop_pid_EMM_PID_ctrl(fc,pid,onoff); break;
+		case 5:	flexcop_pid_ECM_PID_ctrl(fc,pid,onoff); break;
+		default:
+			if (fc->has_32_hw_pid_filter && index < 38) {
+				flexcop_ibi_value vpid,vid;
+
+				/* set the index */
+				vid = fc->read_ibi_reg(fc,index_reg_310);
+				vid.index_reg_310.index_reg = index - 6;
+				fc->write_ibi_reg(fc,index_reg_310, vid);
+
+				vpid = fc->read_ibi_reg(fc,pid_n_reg_314);
+				vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff;
+				vpid.pid_n_reg_314.PID_enable_bit = onoff;
+				fc->write_ibi_reg(fc,pid_n_reg_314, vpid);
+			}
+			break;
+	}
+}
+
+static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc,int onoff)
+{
+	if (fc->fullts_streaming_state != onoff) {
+		deb_ts("%s full TS transfer\n",onoff ? "enabling" : "disabling");
+		flexcop_pid_group_filter(fc, 0, 0x1fe0 * (!onoff));
+		flexcop_pid_group_filter_ctrl(fc,onoff);
+		fc->fullts_streaming_state = onoff;
+	}
+	return 0;
+}
+
+int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff)
+{
+	int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32;
+
+	fc->feedcount += onoff ? 1 : -1;
+	if (dvbdmxfeed->index >= max_pid_filter)
+		fc->extra_feedcount += onoff ? 1 : -1;
+
+	/* toggle complete-TS-streaming when:
+	 * - pid_filtering is not enabled and it is the first or last feed requested
+	 * - pid_filtering is enabled,
+	 *   - but the number of requested feeds is exceeded
+	 *   - or the requested pid is 0x2000 */
+
+	if (!fc->pid_filtering && fc->feedcount == onoff)
+		flexcop_toggle_fullts_streaming(fc,onoff);
+
+	if (fc->pid_filtering) {
+		flexcop_pid_control(fc,dvbdmxfeed->index,dvbdmxfeed->pid,onoff);
+
+		if (fc->extra_feedcount > 0)
+			flexcop_toggle_fullts_streaming(fc,1);
+		else if (dvbdmxfeed->pid == 0x2000)
+			flexcop_toggle_fullts_streaming(fc,onoff);
+		else
+			flexcop_toggle_fullts_streaming(fc,0);
+	}
+
+	/* if it was the first or last feed request change the stream-status */
+	if (fc->feedcount == onoff) {
+		flexcop_rcv_data_ctrl(fc,onoff);
+		if (fc->stream_control)
+			fc->stream_control(fc,onoff);
+	}
+
+	return 0;
+}
+
+void flexcop_hw_filter_init(struct flexcop_device *fc)
+{
+	int i;
+	flexcop_ibi_value v;
+	for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++)
+		flexcop_pid_control(fc,i,0x1fff,0);
+
+	flexcop_pid_group_filter(fc, 0, 0x1fe0);
+	flexcop_pid_group_filter_ctrl(fc,0);
+
+	v = fc->read_ibi_reg(fc,pid_filter_308);
+	v.pid_filter_308.EMM_filter_4 = 1;
+	v.pid_filter_308.EMM_filter_6 = 0;
+	fc->write_ibi_reg(fc,pid_filter_308,v);
+
+	flexcop_null_filter_ctrl(fc, 1);
+}
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
new file mode 100644
index 0000000..be4266d
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -0,0 +1,210 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+#define FC_MAX_I2C_RETRIES 100000
+
+static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100)
+{
+	int i;
+	flexcop_ibi_value r;
+
+	r100->tw_sm_c_100.working_start = 1;
+	deb_i2c("r100 before: %08x\n",r100->raw);
+
+	fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero);
+	fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */
+
+	for (i = 0; i < FC_MAX_I2C_RETRIES; i++) {
+		r = fc->read_ibi_reg(fc, tw_sm_c_100);
+
+		if (!r.tw_sm_c_100.no_base_addr_ack_error) {
+			if (r.tw_sm_c_100.st_done) {  /* && !r.tw_sm_c_100.working_start */
+				*r100 = r;
+				deb_i2c("i2c success\n");
+				return 0;
+			}
+		} else {
+			deb_i2c("suffering from an i2c ack_error\n");
+			return -EREMOTEIO;
+		}
+	}
+	deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i);
+	return -EREMOTEIO;
+}
+
+static int flexcop_i2c_read4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
+{
+	flexcop_ibi_value r104;
+	int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
+		ret;
+
+	if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) {
+		/* The Cablestar needs a different kind of i2c-transfer (does not
+		 * support "Repeat Start"):
+		 * wait for the ACK failure,
+		 * and do a subsequent read with the Bit 30 enabled
+		 */
+		r100.tw_sm_c_100.no_base_addr_ack_error = 1;
+		if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) {
+			deb_i2c("no_base_addr read failed. %d\n",ret);
+			return ret;
+		}
+	}
+
+	buf[0] = r100.tw_sm_c_100.data1_reg;
+
+	if (len > 0) {
+		r104 = fc->read_ibi_reg(fc,tw_sm_c_104);
+		deb_i2c("read: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
+
+		/* there is at least one more byte, otherwise we wouldn't be here */
+		buf[1] = r104.tw_sm_c_104.data2_reg;
+		if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg;
+		if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg;
+	}
+
+	return 0;
+}
+
+static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
+{
+	flexcop_ibi_value r104;
+	int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */
+	r104.raw = 0;
+
+	/* there is at least one byte, otherwise we wouldn't be here */
+	r100.tw_sm_c_100.data1_reg = buf[0];
+
+	r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0;
+	r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
+	r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;
+
+	deb_i2c("write: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
+
+	/* write the additional i2c data before doing the actual i2c operation */
+	fc->write_ibi_reg(fc,tw_sm_c_104,r104);
+	return flexcop_i2c_operation(fc,&r100);
+}
+
+int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
+		flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+{
+	int ret;
+	u16 bytes_to_transfer;
+	flexcop_ibi_value r100;
+
+	deb_i2c("op = %d\n",op);
+	r100.raw = 0;
+	r100.tw_sm_c_100.chipaddr = chipaddr;
+	r100.tw_sm_c_100.twoWS_rw = op;
+	r100.tw_sm_c_100.twoWS_port_reg = port;
+
+	while (len != 0) {
+		bytes_to_transfer = len > 4 ? 4 : len;
+
+		r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1;
+		r100.tw_sm_c_100.baseaddr = addr;
+
+		if (op == FC_READ)
+			ret = flexcop_i2c_read4(fc, r100, buf);
+		else
+			ret = flexcop_i2c_write4(fc,r100, buf);
+
+		if (ret < 0)
+			return ret;
+
+		buf  += bytes_to_transfer;
+		addr += bytes_to_transfer;
+		len  -= bytes_to_transfer;
+	};
+
+	return 0;
+}
+/* exported for PCI i2c */
+EXPORT_SYMBOL(flexcop_i2c_request);
+
+/* master xfer callback for demodulator */
+static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
+{
+	struct flexcop_device *fc = i2c_get_adapdata(i2c_adap);
+	int i, ret = 0;
+
+	if (down_interruptible(&fc->i2c_sem))
+		return -ERESTARTSYS;
+
+	/* reading */
+	if (num == 2 &&
+		msgs[0].flags == 0 &&
+		msgs[1].flags == I2C_M_RD &&
+		msgs[0].buf != NULL &&
+		msgs[1].buf != NULL) {
+
+		ret = fc->i2c_request(fc, FC_READ, FC_I2C_PORT_DEMOD, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len);
+
+	} else for (i = 0; i < num; i++) { /* writing command */
+		if (msgs[i].flags != 0 || msgs[i].buf == NULL || msgs[i].len < 2) {
+			ret = -EINVAL;
+			break;
+		}
+
+		ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_DEMOD, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1);
+	}
+
+	if (ret < 0)
+		err("i2c master_xfer failed");
+	else
+		ret = num;
+
+	up(&fc->i2c_sem);
+
+	return ret;
+}
+
+static u32 flexcop_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm flexcop_algo = {
+	.name			= "FlexCop I2C algorithm",
+	.id				= I2C_ALGO_BIT,
+	.master_xfer	= flexcop_master_xfer,
+	.functionality	= flexcop_i2c_func,
+};
+
+int flexcop_i2c_init(struct flexcop_device *fc)
+{
+	int ret;
+
+	sema_init(&fc->i2c_sem,1);
+
+	memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter));
+	strncpy(fc->i2c_adap.name, "B2C2 FlexCop device",I2C_NAME_SIZE);
+
+	i2c_set_adapdata(&fc->i2c_adap,fc);
+
+	fc->i2c_adap.class	    = I2C_CLASS_TV_DIGITAL;
+	fc->i2c_adap.algo       = &flexcop_algo;
+	fc->i2c_adap.algo_data  = NULL;
+	fc->i2c_adap.id         = I2C_ALGO_BIT;
+
+	if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0)
+		return ret;
+
+	fc->init_state |= FC_STATE_I2C_INIT;
+	return 0;
+}
+
+void flexcop_i2c_exit(struct flexcop_device *fc)
+{
+	if (fc->init_state & FC_STATE_I2C_INIT)
+		i2c_del_adapter(&fc->i2c_adap);
+
+	fc->init_state &= ~FC_STATE_I2C_INIT;
+}
diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c
new file mode 100644
index 0000000..19e06da
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-misc.c
@@ -0,0 +1,66 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-misc.c - miscellaneous functions.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+void flexcop_determine_revision(struct flexcop_device *fc)
+{
+	flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204);
+
+	switch (v.misc_204.Rev_N_sig_revision_hi) {
+		case 0x2:
+			deb_info("found a FlexCopII.\n");
+			fc->rev = FLEXCOP_II;
+			break;
+		case 0x3:
+			deb_info("found a FlexCopIIb.\n");
+			fc->rev = FLEXCOP_IIB;
+			break;
+		case 0x0:
+			deb_info("found a FlexCopIII.\n");
+			fc->rev = FLEXCOP_III;
+			break;
+		default:
+			err("unkown FlexCop Revision: %x. Please report the linux-dvb@linuxtv.org.",v.misc_204.Rev_N_sig_revision_hi);
+			break;
+	}
+
+	if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps))
+		deb_info("this FlexCop has the additional 32 hardware pid filter.\n");
+	else
+		deb_info("this FlexCop has only the 6 basic main hardware pid filter.\n");
+	/* bus parts have to decide if hw pid filtering is used or not. */
+}
+
+const char *flexcop_revision_names[] = {
+	"Unkown chip",
+	"FlexCopII",
+	"FlexCopIIb",
+	"FlexCopIII",
+};
+
+const char *flexcop_device_names[] = {
+	"Unkown device",
+	"AirStar 2 DVB-T",
+	"AirStar 2 ATSC",
+	"SkyStar 2 DVB-S",
+	"SkyStar 2 DVB-S (old version)",
+	"CableStar 2 DVB-C",
+};
+
+const char *flexcop_bus_names[] = {
+	"USB",
+	"PCI",
+};
+
+void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const
+		char *suffix)
+{
+	info("%s '%s' at the '%s' bus controlled by a '%s' %s",prefix,
+			flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type],
+			flexcop_revision_names[fc->rev],suffix);
+}
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
new file mode 100644
index 0000000..ed717c0
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -0,0 +1,381 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-pci.c - covers the PCI part including DMA transfers.
+ *
+ * see flexcop.c for copyright information.
+ */
+
+#define FC_LOG_PREFIX "flexcop-pci"
+#include "flexcop-common.h"
+
+static int enable_pid_filtering = 1;
+module_param(enable_pid_filtering, int, 0444);
+MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
+
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define dprintk(level,args...) \
+	do { if ((debug & level)) printk(args); } while (0)
+#define DEBSTATUS ""
+#else
+#define dprintk(level,args...)
+#define DEBSTATUS " (debugging is not enabled)"
+#endif
+
+#define deb_info(args...)  dprintk(0x01,args)
+#define deb_reg(args...)   dprintk(0x02,args)
+#define deb_ts(args...)    dprintk(0x04,args)
+#define deb_irq(args...)   dprintk(0x08,args)
+
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
+
+#define DRIVER_VERSION "0.1"
+#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
+
+struct flexcop_pci {
+	struct pci_dev *pdev;
+
+#define FC_PCI_INIT     0x01
+#define FC_PCI_DMA_INIT 0x02
+	int init_state;
+
+	void __iomem *io_mem;
+	u32 irq;
+/* buffersize (at least for DMA1, need to be % 188 == 0,
+ * this logic is required */
+#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188)
+#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188)
+	struct flexcop_dma dma[2];
+
+	int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
+	u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
+	int count;
+
+	spinlock_t irq_lock;
+
+	struct flexcop_device *fc_dev;
+};
+
+static int lastwreg,lastwval,lastrreg,lastrval;
+
+static flexcop_ibi_value flexcop_pci_read_ibi_reg (struct flexcop_device *fc, flexcop_ibi_register r)
+{
+	struct flexcop_pci *fc_pci = fc->bus_specific;
+	flexcop_ibi_value v;
+	v.raw = readl(fc_pci->io_mem + r);
+
+	if (lastrreg != r || lastrval != v.raw) {
+		lastrreg = r; lastrval = v.raw;
+		deb_reg("new rd: %3x: %08x\n",r,v.raw);
+	}
+
+	return v;
+}
+
+static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register r, flexcop_ibi_value v)
+{
+	struct flexcop_pci *fc_pci = fc->bus_specific;
+
+	if (lastwreg != r || lastwval != v.raw) {
+		lastwreg = r; lastwval = v.raw;
+		deb_reg("new wr: %3x: %08x\n",r,v.raw);
+	}
+
+	writel(v.raw, fc_pci->io_mem + r);
+	return 0;
+}
+
+/* When PID filtering is turned on, we use the timer IRQ, because small amounts
+ * of data need to be passed to the user space instantly as well. When PID
+ * filtering is turned off, we use the page-change-IRQ */
+static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct flexcop_pci *fc_pci = dev_id;
+	struct flexcop_device *fc = fc_pci->fc_dev;
+	flexcop_ibi_value v = fc->read_ibi_reg(fc,irq_20c);
+	irqreturn_t ret = IRQ_HANDLED;
+
+	spin_lock_irq(&fc_pci->irq_lock);
+
+	if (v.irq_20c.DMA1_IRQ_Status == 1) {
+		if (fc_pci->active_dma1_addr == 0)
+			flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188);
+		else
+			flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr1,fc_pci->dma[0].size / 188);
+
+		deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr);
+		fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr;
+	} else if (v.irq_20c.DMA1_Timer_Status == 1) {
+		/* for the timer IRQ we only can use buffer dmx feeding, because we don't have
+		 * complete TS packets when reading from the DMA memory */
+		dma_addr_t cur_addr =
+			fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
+		u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
+
+		deb_irq("irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ",
+				v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos);
+
+		/* buffer end was reached, restarted from the beginning
+		 * pass the data from last_cur_pos to the buffer end to the demux
+		 */
+		if (cur_pos < fc_pci->last_dma1_cur_pos) {
+			deb_irq(" end was reached: passing %d bytes ",(fc_pci->dma[0].size*2 - 1) - fc_pci->last_dma1_cur_pos);
+			flexcop_pass_dmx_data(fc_pci->fc_dev,
+					fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
+					(fc_pci->dma[0].size*2) - fc_pci->last_dma1_cur_pos);
+			fc_pci->last_dma1_cur_pos = 0;
+			fc_pci->count = 0;
+		}
+
+		if (cur_pos > fc_pci->last_dma1_cur_pos) {
+			deb_irq(" passing %d bytes ",cur_pos - fc_pci->last_dma1_cur_pos);
+			flexcop_pass_dmx_data(fc_pci->fc_dev,
+					fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
+					cur_pos - fc_pci->last_dma1_cur_pos);
+		}
+		deb_irq("\n");
+
+		fc_pci->last_dma1_cur_pos = cur_pos;
+	} else
+		ret = IRQ_NONE;
+
+	spin_unlock_irq(&fc_pci->irq_lock);
+
+/* packet count would be ideal for hw filtering, but it isn't working. Either
+ * the data book is wrong, or I'm unable to read it correctly */
+
+/*	if (v.irq_20c.DMA1_Size_IRQ_Status == 1) { packet counter */
+
+	return ret;
+}
+
+static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff)
+{
+	struct flexcop_pci *fc_pci = fc->bus_specific;
+	if (onoff) {
+		flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1);
+		flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1);
+		flexcop_dma_config_timer(fc,FC_DMA_1,1);
+
+		if (fc_pci->fc_dev->pid_filtering) {
+			fc_pci->last_dma1_cur_pos = 0;
+			flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
+		} else {
+			fc_pci->active_dma1_addr = 0;
+			flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
+		}
+
+/*		flexcop_dma_config_packet_count(fc,FC_DMA_1,0xc0);
+		flexcop_dma_control_packet_irq(fc,FC_DMA_1,1); */
+
+		deb_irq("irqs enabled\n");
+	} else {
+		if (fc_pci->fc_dev->pid_filtering)
+			flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
+		else
+			flexcop_dma_control_size_irq(fc,FC_DMA_1,0);
+
+//		flexcop_dma_control_packet_irq(fc,FC_DMA_1,0);
+		deb_irq("irqs disabled\n");
+	}
+
+	return 0;
+}
+
+static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci)
+{
+	int ret;
+	if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[0],FC_DEFAULT_DMA1_BUFSIZE)) != 0)
+		return ret;
+
+	if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[1],FC_DEFAULT_DMA2_BUFSIZE)) != 0)
+		goto dma1_free;
+
+	flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1);
+	flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO   | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
+
+	fc_pci->init_state |= FC_PCI_DMA_INIT;
+	goto success;
+dma1_free:
+	flexcop_dma_free(&fc_pci->dma[0]);
+
+success:
+	return ret;
+}
+
+static void flexcop_pci_dma_exit(struct flexcop_pci *fc_pci)
+{
+	if (fc_pci->init_state & FC_PCI_DMA_INIT) {
+		flexcop_dma_free(&fc_pci->dma[0]);
+		flexcop_dma_free(&fc_pci->dma[1]);
+	}
+	fc_pci->init_state &= ~FC_PCI_DMA_INIT;
+}
+
+static int flexcop_pci_init(struct flexcop_pci *fc_pci)
+{
+	int ret;
+	u8 card_rev;
+
+	pci_read_config_byte(fc_pci->pdev, PCI_CLASS_REVISION, &card_rev);
+	info("card revision %x", card_rev);
+
+	if ((ret = pci_enable_device(fc_pci->pdev)) != 0)
+		return ret;
+
+	pci_set_master(fc_pci->pdev);
+
+	/* enable interrupts */
+	// pci_write_config_dword(pdev, 0x6c, 0x8000);
+
+	if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0)
+		goto err_pci_disable_device;
+
+	fc_pci->io_mem = pci_iomap(fc_pci->pdev, 0, 0x800);
+
+	if (!fc_pci->io_mem) {
+		err("cannot map io memory\n");
+		ret = -EIO;
+		goto err_pci_release_regions;
+	}
+
+	pci_set_drvdata(fc_pci->pdev, fc_pci);
+
+	if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_irq,
+					SA_SHIRQ, DRIVER_NAME, fc_pci)) != 0)
+		goto err_pci_iounmap;
+
+	spin_lock_init(&fc_pci->irq_lock);
+
+	fc_pci->init_state |= FC_PCI_INIT;
+	goto success;
+
+err_pci_iounmap:
+	pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
+	pci_set_drvdata(fc_pci->pdev, NULL);
+err_pci_release_regions:
+	pci_release_regions(fc_pci->pdev);
+err_pci_disable_device:
+	pci_disable_device(fc_pci->pdev);
+
+success:
+	return ret;
+}
+
+static void flexcop_pci_exit(struct flexcop_pci *fc_pci)
+{
+	if (fc_pci->init_state & FC_PCI_INIT) {
+		free_irq(fc_pci->pdev->irq, fc_pci);
+		pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
+		pci_set_drvdata(fc_pci->pdev, NULL);
+		pci_release_regions(fc_pci->pdev);
+		pci_disable_device(fc_pci->pdev);
+	}
+	fc_pci->init_state &= ~FC_PCI_INIT;
+}
+
+
+static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct flexcop_device *fc;
+	struct flexcop_pci *fc_pci;
+	int ret = -ENOMEM;
+
+	if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_pci))) == NULL) {
+		err("out of memory\n");
+		return -ENOMEM;
+	}
+
+/* general flexcop init */
+	fc_pci = fc->bus_specific;
+	fc_pci->fc_dev = fc;
+
+	fc->read_ibi_reg = flexcop_pci_read_ibi_reg;
+	fc->write_ibi_reg = flexcop_pci_write_ibi_reg;
+	fc->i2c_request = flexcop_i2c_request;
+	fc->get_mac_addr = flexcop_eeprom_check_mac_addr;
+
+	fc->stream_control = flexcop_pci_stream_control;
+
+	if (enable_pid_filtering)
+		info("will use the HW PID filter.");
+	else
+		info("will pass the complete TS to the demuxer.");
+
+	fc->pid_filtering = enable_pid_filtering;
+	fc->bus_type = FC_PCI;
+
+	fc->dev = &pdev->dev;
+	fc->owner = THIS_MODULE;
+
+/* bus specific part */
+	fc_pci->pdev = pdev;
+	if ((ret = flexcop_pci_init(fc_pci)) != 0)
+		goto err_kfree;
+
+/* init flexcop */
+	if ((ret = flexcop_device_initialize(fc)) != 0)
+		goto err_pci_exit;
+
+/* init dma */
+	if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
+		goto err_fc_exit;
+
+	goto success;
+err_fc_exit:
+	flexcop_device_exit(fc);
+err_pci_exit:
+	flexcop_pci_exit(fc_pci);
+err_kfree:
+	flexcop_device_kfree(fc);
+success:
+	return ret;
+}
+
+/* in theory every _exit function should be called exactly two times,
+ * here and in the bail-out-part of the _init-function
+ */
+static void flexcop_pci_remove(struct pci_dev *pdev)
+{
+	struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
+
+	flexcop_pci_dma_exit(fc_pci);
+	flexcop_device_exit(fc_pci->fc_dev);
+	flexcop_pci_exit(fc_pci);
+	flexcop_device_kfree(fc_pci->fc_dev);
+}
+
+static struct pci_device_id flexcop_pci_tbl[] = {
+	{ PCI_DEVICE(0x13d0, 0x2103) },
+/*	{ PCI_DEVICE(0x13d0, 0x2200) }, PCI FlexCopIII ? */
+	{ },
+};
+
+MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
+
+static struct pci_driver flexcop_pci_driver = {
+	.name = "Technisat/B2C2 FlexCop II/IIb/III PCI",
+	.id_table = flexcop_pci_tbl,
+	.probe = flexcop_pci_probe,
+	.remove = flexcop_pci_remove,
+};
+
+static int __init flexcop_pci_module_init(void)
+{
+	return pci_register_driver(&flexcop_pci_driver);
+}
+
+static void __exit flexcop_pci_module_exit(void)
+{
+	pci_unregister_driver(&flexcop_pci_driver);
+}
+
+module_init(flexcop_pci_module_init);
+module_exit(flexcop_pci_module_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_NAME);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h
new file mode 100644
index 0000000..5e131be
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-reg.h
@@ -0,0 +1,701 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII
+ *
+ * see flexcop.c for copyright information.
+ */
+#ifndef __FLEXCOP_REG_H__
+#define __FLEXCOP_REG_H__
+
+
+typedef enum {
+	FLEXCOP_UNK = 0,
+	FLEXCOP_II,
+	FLEXCOP_IIB,
+	FLEXCOP_III,
+} flexcop_revision_t;
+
+extern const char *flexcop_revision_names[];
+
+typedef enum {
+	FC_UNK = 0,
+	FC_AIR_DVB,
+	FC_AIR_ATSC,
+	FC_SKY,
+	FC_SKY_OLD,
+	FC_CABLE,
+} flexcop_device_type_t;
+
+typedef enum {
+	FC_USB = 0,
+	FC_PCI,
+} flexcop_bus_t;
+
+extern const char *flexcop_device_names[];
+
+/* FlexCop IBI Registers */
+
+/* flexcop_ibi_reg - a huge union representing the register structure */
+typedef union {
+	u32 raw;
+
+/* DMA 0x000 to 0x01c
+ * DMA1 0x000 to 0x00c
+ * DMA2 0x010 to 0x01c
+ */
+	struct {
+		u32 dma_0start        : 1;   /* set: data will be delivered to dma1_address0 */
+        u32 dma_0No_update    : 1;   /* set: dma1_cur_address will be updated, unset: no update */
+        u32 dma_address0      :30;   /* physical/virtual host memory address0 DMA */
+	} dma_0x0;
+
+	struct {
+		u32 DMA_maxpackets    : 8;   /* (remapped) PCI DMA1 Packet Count Interrupt. This variable
+										is able to be read and written while bit(1) of register
+										0x00c (remap_enable) is set. This variable represents
+										the number of packets that will be transmitted to the PCI
+										host using PCI DMA1 before an interrupt to the PCI is
+										asserted. This functionality may be enabled using bit(20)
+										of register 0x208. N=0 disables the IRQ. */
+		u32 dma_addr_size     :24;   /* size of memory buffer in DWORDs (bytesize / 4) for DMA */
+	} dma_0x4_remap;
+
+	struct {
+		u32 dma1timer         : 7;   /* reading PCI DMA1 timer ... when remap_enable is 0 */
+		u32 unused            : 1;
+		u32 dma_addr_size     :24;
+	} dma_0x4_read;
+
+	struct {
+		u32 unused            : 1;
+		u32 dmatimer          : 7;   /* writing PCI DMA1 timer ... when remap_enable is 0 */
+		u32 dma_addr_size     :24;
+	} dma_0x4_write;
+
+	struct {
+		u32 unused            : 2;
+		u32 dma_cur_addr      :30;   /* current physical host memory address pointer for DMA */
+	} dma_0x8;
+
+	struct {
+		u32 dma_1start        : 1;   /* set: data will be delivered to dma_address1, when dma_address0 is full */
+		u32 remap_enable      : 1;   /* remap enable for 0x0x4(7:0) */
+		u32 dma_address1      :30;   /* Physical/virtual address 1 on DMA */
+	} dma_0xc;
+
+/* Two-wire Serial Master and Clock 0x100-0x110 */
+	struct {
+//		u32 slave_transmitter : 1;   /* ???*/
+		u32 chipaddr          : 7;   /* two-line serial address of the target slave */
+		u32 reserved1         : 1;
+		u32 baseaddr          : 8;   /* address of the location of the read/write operation */
+		u32 data1_reg         : 8;   /* first byte in two-line serial read/write operation */
+		u32 working_start     : 1;  /* when doing a write operation this indicator is 0 when ready
+									  * set to 1 when doing a write operation */
+		u32 twoWS_rw          : 1;   /* read/write indicator (1 = read, 0 write) */
+		u32 total_bytes       : 2;   /* number of data bytes in each two-line serial transaction (0 = 1 byte, 11 = 4byte)*/
+		u32 twoWS_port_reg    : 2;   /* port selection: 01 - Front End/Demod, 10 - EEPROM, 11 - Tuner */
+		u32 no_base_addr_ack_error : 1;   /* writing: write-req: frame is produced w/o baseaddr, read-req: read-cycles w/o
+									  * preceding address assignment write frame
+									  * ACK_ERROR = 1 when no ACK from slave in the last transaction */
+		u32 st_done           : 1;   /* indicator for transaction is done */
+	} tw_sm_c_100;
+
+	struct {
+		u32 data2_reg         : 8;   /* 2nd data byte */
+		u32 data3_reg         : 8;   /* 3rd data byte */
+		u32 data4_reg         : 8;   /* 4th data byte */
+		u32 exlicit_stops     : 1;   /* when set, transactions are produced w/o trailing STOP flag, then send isolated STOP flags */
+		u32 force_stop        : 1;   /* isolated stop flag */
+		u32 unused            : 6;
+	} tw_sm_c_104;
+
+/* Clock. The register allows the FCIII to convert an incoming Master clock
+ * (MCLK) signal into a lower frequency clock through the use of a LowCounter
+ * (TLO) and a High- Counter (THI). The time counts for THI and TLO are
+ * measured in MCLK; each count represents 4 MCLK input clock cycles.
+ *
+ * The default output for port #1 is set for Front End Demod communication. (0x108)
+ * The default output for port #2 is set for EEPROM communication. (0x10c)
+ * The default output for port #3 is set for Tuner communication. (0x110)
+ */
+	struct {
+		u32 thi1              : 6;   /* Thi for port #1 (def: 100110b; 38) */
+		u32 reserved1         : 2;
+		u32 tlo1              : 5;   /* Tlo for port #1 (def: 11100b; 28) */
+		u32 reserved2         :19;
+	} tw_sm_c_108;
+
+	struct {
+		u32 thi1              : 6;   /* Thi for port #2 (def: 111001b; 57) */
+		u32 reserved1         : 2;
+		u32 tlo1              : 5;   /* Tlo for port #2 (def: 11100b; 28) */
+		u32 reserved2         :19;
+	} tw_sm_c_10c;
+
+	struct {
+		u32 thi1              : 6;   /* Thi for port #3 (def: 111001b; 57) */
+		u32 reserved1         : 2;
+		u32 tlo1              : 5;   /* Tlo for port #3 (def: 11100b; 28) */
+		u32 reserved2         :19;
+	} tw_sm_c_110;
+
+/* LNB Switch Frequency 0x200
+ * Clock that creates the LNB switch tone. The default is set to have a fixed
+ * low output (not oscillating) to the LNB_CTL line.
+ */
+	struct {
+		u32 LNB_CTLHighCount_sig :15; /* It is the number of pre-scaled clock cycles that will be low. */
+		u32 LNB_CTLLowCount_sig  :15; /* For example, to obtain a 22KHz output given a 45 Mhz Master
+										Clock signal (MCLK), set PreScalar=01 and LowCounter value to 0x1ff. */
+		u32 LNB_CTLPrescaler_sig : 2; /* pre-scaler divides MCLK: 00 (no division), 01 by 2, 10 by 4, 11 by 12 */
+	} lnb_switch_freq_200;
+
+/* ACPI, Peripheral Reset, LNB Polarity
+ * ACPI power conservation mode, LNB polarity selection (low or high voltage),
+ * and peripheral reset.
+ */
+	struct {
+		u32 ACPI1_sig         : 1;   /* turn of the power of tuner and LNB, not implemented in FCIII */
+		u32 ACPI3_sig         : 1;   /* turn of power of the complete satelite receiver board (except FCIII) */
+		u32 LNB_L_H_sig       : 1;   /* low or high voltage for LNB. (0 = low, 1 = high) */
+		u32 Per_reset_sig     : 1;   /* misc. init reset (default: 1), to reset set to low and back to high */
+		u32 reserved          :20;
+		u32 Rev_N_sig_revision_hi : 4;/* 0xc in case of FCIII */
+		u32 Rev_N_sig_reserved1 : 2;
+		u32 Rev_N_sig_caps    : 1;   /* if 1, FCIII has 32 PID- and MAC-filters and is capable of IP multicast */
+		u32 Rev_N_sig_reserved2 : 1;
+	} misc_204;
+
+/* Control and Status 0x208 to 0x21c */
+/* Gross enable and disable control */
+	struct {
+		u32 Stream1_filter_sig : 1;  /* Stream1 PID filtering */
+		u32 Stream2_filter_sig : 1;  /* Stream2 PID filtering */
+		u32 PCR_filter_sig    : 1;   /* PCR PID filter */
+		u32 PMT_filter_sig    : 1;   /* PMT PID filter */
+
+		u32 EMM_filter_sig    : 1;   /* EMM PID filter */
+		u32 ECM_filter_sig    : 1;   /* ECM PID filter */
+		u32 Null_filter_sig   : 1;   /* Filters null packets, PID=0x1fff. */
+		u32 Mask_filter_sig   : 1;   /* mask PID filter */
+
+		u32 WAN_Enable_sig    : 1;   /* WAN output line through V8 memory space is activated. */
+		u32 WAN_CA_Enable_sig : 1;   /* not in FCIII */
+		u32 CA_Enable_sig     : 1;   /* not in FCIII */
+		u32 SMC_Enable_sig    : 1;   /* CI stream data (CAI) goes directly to the smart card intf (opposed IBI 0x600 or SC-cmd buf). */
+
+		u32 Per_CA_Enable_sig : 1;   /* not in FCIII */
+		u32 Multi2_Enable_sig : 1;   /* ? */
+		u32 MAC_filter_Mode_sig : 1; /* (MAC_filter_enable) Globally enables MAC filters for Net PID filteres. */
+		u32 Rcv_Data_sig      : 1;   /* PID filtering module enable. When this bit is a one, the PID filter will
+										examine and process packets according to all other (individual) PID
+										filtering controls. If it a zero, no packet processing of any kind will
+										take place. All data from the tuner will be thrown away. */
+
+		u32 DMA1_IRQ_Enable_sig : 1; /* When set, a DWORD counter is enabled on PCI DMA1 that asserts the PCI
+									  * interrupt after the specified count for filling the buffer. */
+		u32 DMA1_Timer_Enable_sig : 1; /* When set, a timer is enabled on PCI DMA1 that asserts the PCI interrupt
+											after a specified amount of time. */
+		u32 DMA2_IRQ_Enable_sig : 1;   /* same as DMA1_IRQ_Enable_sig but for DMA2 */
+		u32 DMA2_Timer_Enable_sig : 1;   /* same as DMA1_Timer_Enable_sig but for DMA2 */
+
+		u32 DMA1_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA1 that asserts the PCI interrupt. */
+		u32 DMA2_Size_IRQ_Enable_sig : 1; /* When set, a packet	count detector is enabled on PCI DMA2 that asserts the PCI interrupt. */
+		u32 Mailbox_from_V8_Enable_sig: 1; /* When set, writes to the mailbox register produce an interrupt to the
+											PCI host to indicate that mailbox data is available. */
+
+		u32 unused            : 9;
+	} ctrl_208;
+
+/* General status. When a PCI interrupt occurs, this register is read to
+ * discover the reason for the interrupt.
+ */
+	struct {
+		u32 DMA1_IRQ_Status   : 1;   /* When set(1) the DMA1 counter had generated an IRQ. Read Only. */
+		u32 DMA1_Timer_Status : 1;   /* When set(1) the DMA1 timer had generated an IRQ. Read Only. */
+		u32 DMA2_IRQ_Status   : 1;   /* When set(1) the DMA2 counter had generated an IRQ. Read Only. */
+		u32 DMA2_Timer_Status : 1;   /* When set(1) the DMA2 timer had generated an IRQ. Read Only. */
+		u32 DMA1_Size_IRQ_Status : 1; /* (Read only). This register is read after an interrupt to */
+		u32 DMA2_Size_IRQ_Status : 1; /* find out why we had an IRQ. Reading this register will clear this bit. Packet count*/
+		u32 Mailbox_from_V8_Status_sig: 1; /* Same as above. Reading this register will clear this bit. */
+		u32 Data_receiver_error : 1; /* 1 indicate an error in the receiver Front End (Tuner module) */
+		u32 Continuity_error_flag : 1;   /* 1 indicates a continuity error in the TS stream. */
+		u32 LLC_SNAP_FLAG_set : 1;   /* 1 indicates that the LCC_SNAP_FLAG was set. */
+		u32 Transport_Error   : 1;   /*  When set indicates that an unexpected packet was received. */
+		u32 reserved          :21;
+	} irq_20c;
+
+
+/* Software reset register */
+	struct {
+		u32 reset_blocks      : 8;   /* Enabled when Block_reset_enable = 0xB2 and 0x208 bits 15:8 = 0x00.
+										Each bit location represents a 0x100 block of registers. Writing
+										a one in a bit location resets that block of registers and the logic
+										that it controls. */
+		u32 Block_reset_enable : 8;  /* This variable is set to 0xB2 when the register is written. */
+		u32 Special_controls  :16;   /* Asserts Reset_V8 => 0xC258; Turns on pci encryption => 0xC25A;
+										Turns off pci encryption => 0xC259 Note: pci_encryption default
+										at power-up is ON. */
+	} sw_reset_210;
+
+	struct {
+		u32 vuart_oe_sig      : 1;   /* When clear, the V8 processor has sole control of the serial UART
+										(RS-232 Smart Card interface). When set, the IBI interface
+										defined by register 0x600 controls the serial UART. */
+		u32 v2WS_oe_sig       : 1;   /* When clear, the V8 processor has direct control of the Two-line
+										Serial Master EEPROM target. When set, the Two-line Serial Master
+										EEPROM target interface is controlled by IBI register 0x100. */
+		u32 halt_V8_sig       : 1;   /* When set, contiguous wait states are applied to the V8-space
+										bus masters. Once this signal is cleared, normal V8-space
+										operations resume. */
+		u32 section_pkg_enable_sig: 1; /* When set, this signal enables the front end translation circuitry
+										  to process section packed transport streams. */
+		u32 s2p_sel_sig       : 1;   /* Serial to parallel conversion. When set, polarized transport data
+										within the FlexCop3 front end circuitry is converted from a serial
+										stream into parallel data before downstream processing otherwise
+										interprets the data. */
+		u32 unused1           : 3;
+		u32 polarity_PS_CLK_sig: 1;  /* This signal is used to invert the input polarity of the tranport
+										stream CLOCK signal before any processing occurs on the transport
+										stream within FlexCop3. */
+		u32 polarity_PS_VALID_sig: 1; /* This signal is used to invert the input polarity of the tranport
+										stream VALID signal before any processing occurs on the transport
+										stream within FlexCop3. */
+		u32 polarity_PS_SYNC_sig: 1; /* This signal is used to invert the input polarity of the tranport
+										stream SYNC signal before any processing occurs on the transport
+										stream within FlexCop3. */
+		u32 polarity_PS_ERR_sig: 1;  /* This signal is used to invert the input polarity of the tranport
+										stream ERROR signal before any processing occurs on the transport
+										stream within FlexCop3. */
+		u32 unused2           :20;
+	} misc_214;
+
+/* Mailbox from V8 to host */
+	struct {
+		u32 Mailbox_from_V8   :32;   /* When this register is written by either the V8 processor or by an
+										end host, an interrupt is generated to the PCI host to indicate
+										that mailbox data is available. Reading register 20c will clear
+										the IRQ. */
+	} mbox_v8_to_host_218;
+
+/* Mailbox from host to v8 Mailbox_to_V8
+ * Mailbox_to_V8 mailbox storage register
+ * used to send messages from PCI to V8. Writing to this register will send an
+ * IRQ to the V8. Then it can read the data from here. Reading this register
+ * will clear the IRQ. If the V8 is halted and bit 31 of this register is set,
+ * then this register is used instead as a direct interface to access the
+ * V8space memory.
+ */
+	struct {
+		u32 sysramaccess_data : 8;   /* Data byte written or read from the specified address in V8 SysRAM. */
+		u32 sysramaccess_addr :15;   /* 15 bit address used to access V8 Sys-RAM. */
+		u32 unused            : 7;
+		u32 sysramaccess_write: 1;   /* Write flag used to latch data into the V8 SysRAM. */
+		u32 sysramaccess_busmuster: 1; /* Setting this bit when the V8 is halted at 0x214 Bit(2) allows
+										  this IBI register interface to directly drive the V8-space memory. */
+	} mbox_host_to_v8_21c;
+
+
+/* PIDs, Translation Bit, SMC Filter Select 0x300 to 0x31c */
+	struct {
+		u32 Stream1_PID       :13;   /* Primary use is receiving Net data, so these 13 bits normally
+										hold the PID value for the desired network stream. */
+		u32 Stream1_trans     : 1;   /* When set, Net translation will take place for Net data ferried in TS packets. */
+		u32 MAC_Multicast_filter : 1;   /* When clear, multicast MAC filtering is not allowed for Stream1 and PID_n filters. */
+		u32 debug_flag_pid_saved : 1;
+		u32 Stream2_PID       :13;   /* 13 bits for Stream 2 PID filter value. General use. */
+		u32 Stream2_trans     : 1;   /* When set Tables/CAI translation will take place for the data ferried in
+										Stream2_PID TS packets. */
+		u32 debug_flag_write_status00 : 1;
+		u32 debug_fifo_problem : 1;
+	} pid_filter_300;
+
+	struct {
+		u32 PCR_PID           :13;   /* PCR stream PID filter value. Primary use is Program Clock Reference stream filtering. */
+		u32 PCR_trans         : 1;   /* When set, Tables/CAI translation will take place for these packets. */
+		u32 debug_overrun3    : 1;
+		u32 debug_overrun2    : 1;
+		u32 PMT_PID           :13;   /* stream PID filter value. Primary use is Program Management Table segment filtering. */
+		u32 PMT_trans         : 1;   /* When set, Tables/CAI translation will take place for these packets. */
+		u32 reserved          : 2;
+	} pid_filter_304;
+
+	struct {
+		u32 EMM_PID           :13;   /* EMM PID filter value. Primary use is Entitlement Management Messaging for
+										conditional access-related data. */
+		u32 EMM_trans         : 1;   /* When set, Tables/CAI translation will take place for these packets. */
+		u32 EMM_filter_4      : 1;   /* When set will pass only EMM data possessing the same ID code as the
+										first four bytes (32 bits) of the end-user s 6-byte Smart Card ID number Select */
+		u32 EMM_filter_6      : 1;   /* When set will pass only EMM data possessing the same 6-byte code as the end-users
+										complete 6-byte Smart Card ID number. */
+		u32 ECM_PID           :13;   /* ECM PID filter value. Primary use is Entitlement Control Messaging for conditional
+										access-related data. */
+		u32 ECM_trans         : 1;   /* When set, Tables/CAI translation will take place for these packets. */
+		u32 reserved          : 2;
+	} pid_filter_308;
+
+	struct {
+		u32 Group_PID     :13;   /* PID value for group filtering. */
+		u32 Group_trans   : 1;   /* When set, Tables/CAI translation will take place for these packets. */
+		u32 unused1       : 2;
+		u32 Group_mask    :13;   /* Mask value used in logical "and" equation that defines group filtering */
+		u32 unused2       : 3;
+	} pid_filter_30c_ext_ind_0_7;
+
+	struct {
+		u32 net_master_read :17;
+		u32 unused        :15;
+	} pid_filter_30c_ext_ind_1;
+
+	struct {
+		u32 net_master_write :17;
+		u32 unused        :15;
+	} pid_filter_30c_ext_ind_2;
+
+	struct {
+		u32 next_net_master_write :17;
+		u32 unused        :15;
+	} pid_filter_30c_ext_ind_3;
+
+	struct {
+		u32 unused1       : 1;
+		u32 state_write   :10;
+		u32 reserved1     : 6;   /* default: 000100 */
+		u32 stack_read    :10;
+		u32 reserved2     : 5;   /* default: 00100 */
+	} pid_filter_30c_ext_ind_4;
+
+	struct {
+		u32 stack_cnt     :10;
+		u32 unused        :22;
+	} pid_filter_30c_ext_ind_5;
+
+	struct {
+		u32 pid_fsm_save_reg0 : 2;
+		u32 pid_fsm_save_reg1 : 2;
+		u32 pid_fsm_save_reg2 : 2;
+		u32 pid_fsm_save_reg3 : 2;
+		u32 pid_fsm_save_reg4 : 2;
+		u32 pid_fsm_save_reg300 : 2;
+		u32 write_status1 : 2;
+		u32 write_status4 : 2;
+		u32 data_size_reg :12;
+		u32 unused        : 4;
+	} pid_filter_30c_ext_ind_6;
+
+	struct {
+		u32 index_reg         : 5;   /* (Index pointer) Points at an internal PIDn register. A binary code
+										representing one of 32 internal PIDn registers as well as its
+										corresponding internal MAC_lown register. */
+		u32 extra_index_reg   : 3;   /* This vector is used to select between sets of debug signals routed to register 0x30c. */
+		u32 AB_select         : 1;   /* Used in conjunction with 0x31c. read/write to the MAC_highA or MAC_highB register
+										0=MAC_highB register, 1=MAC_highA */
+		u32 pass_alltables    : 1;   /* 1=Net packets are not filtered against the Network Table ID found in register 0x400.
+										All types of networks (DVB, ATSC, ISDB) are passed. */
+		u32 unused            :22;
+	} index_reg_310;
+
+	struct {
+		u32 PID               :13;   /* PID value */
+		u32 PID_trans         : 1;   /* translation will take place for packets filtered */
+		u32 PID_enable_bit    : 1;   /* When set this PID filter is enabled */
+		u32 reserved          :17;
+	} pid_n_reg_314;
+
+	struct {
+		u32 A4_byte           : 8;
+		u32 A5_byte           : 8;
+		u32 A6_byte           : 8;
+		u32 Enable_bit        : 1;   /* enabled (1) or disabled (1) */
+		u32 HighAB_bit        : 1;   /* use MAC_highA (1) or MAC_highB (0) as MSB */
+		u32 reserved          : 6;
+	} mac_low_reg_318;
+
+	struct {
+		u32 A1_byte           : 8;
+		u32 A2_byte           : 8;
+		u32 A3_byte           : 8;
+		u32 reserved          : 8;
+	} mac_high_reg_31c;
+
+/* Table, SMCID,MACDestination Filters 0x400 to 0x41c */
+	struct {
+		u32 reserved          :16;
+#define fc_data_Tag_ID_DVB  0x3e
+#define fc_data_Tag_ID_ATSC 0x3f
+#define fc_data_Tag_ID_IDSB 0x8b
+		u32 data_Tag_ID       :16;
+	} data_tag_400;
+
+	struct {
+		u32 Card_IDbyte6      : 8;
+		u32 Card_IDbyte5      : 8;
+		u32 Card_IDbyte4      : 8;
+		u32 Card_IDbyte3      : 8;
+	} card_id_408;
+
+	struct {
+		u32 Card_IDbyte2      : 8;
+		u32 Card_IDbyte1      : 8;
+	} card_id_40c;
+
+	/* holding the unique mac address of the receiver which houses the FlexCopIII */
+	struct {
+		u32 MAC1              : 8;
+		u32 MAC2              : 8;
+		u32 MAC3              : 8;
+		u32 MAC6              : 8;
+	} mac_address_418;
+
+	struct {
+		u32 MAC7              : 8;
+		u32 MAC8              : 8;
+		u32 reserved          : 16;
+	} mac_address_41c;
+
+	struct {
+		u32 transmitter_data_byte : 8;
+		u32 ReceiveDataReady  : 1;
+		u32 ReceiveByteFrameError: 1;
+		u32 txbuffempty       : 1;
+		u32 reserved          :21;
+	} ci_600;
+
+	struct {
+		u32 pi_d              : 8;
+		u32 pi_ha             :20;
+		u32 pi_rw             : 1;
+		u32 pi_component_reg  : 3;
+	} pi_604;
+
+	struct {
+		u32 serialReset       : 1;
+		u32 oncecycle_read    : 1;
+		u32 Timer_Read_req    : 1;
+		u32 Timer_Load_req    : 1;
+		u32 timer_data        : 7;
+		u32 unused            : 1; /* ??? not mentioned in data book */
+		u32 Timer_addr        : 5;
+		u32 reserved          : 3;
+		u32 pcmcia_a_mod_pwr_n : 1;
+		u32 pcmcia_b_mod_pwr_n : 1;
+		u32 config_Done_stat  : 1;
+		u32 config_Init_stat  : 1;
+		u32 config_Prog_n     : 1;
+		u32 config_wr_n       : 1;
+		u32 config_cs_n       : 1;
+		u32 config_cclk       : 1;
+		u32 pi_CiMax_IRQ_n    : 1;
+		u32 pi_timeout_status : 1;
+		u32 pi_wait_n         : 1;
+		u32 pi_busy_n         : 1;
+	} pi_608;
+
+	struct {
+		u32 PID               :13;
+		u32 key_enable        : 1;
+#define fc_key_code_default 0x1
+#define fc_key_code_even    0x2
+#define fc_key_code_odd     0x3
+		u32 key_code          : 2;
+		u32 key_array_col     : 3;
+		u32 key_array_row     : 5;
+		u32 dvb_en            : 1; /* 0=TS bypasses the Descrambler */
+		u32 rw_flag           : 1;
+		u32 reserved          : 6;
+	} dvb_reg_60c;
+
+/* SRAM and Output Destination 0x700 to 0x714 */
+	struct {
+		u32 sram_addr         :15;
+		u32 sram_rw           : 1;   /* 0=write, 1=read */
+		u32 sram_data         : 8;
+		u32 sc_xfer_bit       : 1;
+		u32 reserved1         : 3;
+		u32 oe_pin_reg        : 1;
+		u32 ce_pin_reg        : 1;
+		u32 reserved2         : 1;
+		u32 start_sram_ibi    : 1;
+	} sram_ctrl_reg_700;
+
+	struct {
+		u32 net_addr_read     :16;
+		u32 net_addr_write    :16;
+	} net_buf_reg_704;
+
+	struct {
+		u32 cai_read          :11;
+		u32 reserved1         : 5;
+		u32 cai_write         :11;
+		u32 reserved2         : 6;
+		u32 cai_cnt           : 4;
+	} cai_buf_reg_708;
+
+	struct {
+		u32 cao_read          :11;
+		u32 reserved1         : 5;
+		u32 cap_write         :11;
+		u32 reserved2         : 6;
+		u32 cao_cnt           : 4;
+	} cao_buf_reg_70c;
+
+	struct {
+		u32 media_read        :11;
+		u32 reserved1         : 5;
+		u32 media_write       :11;
+		u32 reserved2         : 6;
+		u32 media_cnt         : 4;
+	} media_buf_reg_710;
+
+	struct {
+		u32 NET_Dest          : 2;
+		u32 CAI_Dest          : 2;
+		u32 CAO_Dest          : 2;
+		u32 MEDIA_Dest        : 2;
+		u32 net_ovflow_error  : 1;
+		u32 media_ovflow_error : 1;
+		u32 cai_ovflow_error  : 1;
+		u32 cao_ovflow_error  : 1;
+		u32 ctrl_usb_wan      : 1;
+		u32 ctrl_sramdma      : 1;
+		u32 ctrl_maximumfill  : 1;
+		u32 reserved          :17;
+	} sram_dest_reg_714;
+
+	struct {
+		u32 net_cnt           :12;
+		u32 reserved1         : 4;
+		u32 net_addr_read     : 1;
+		u32 reserved2         : 3;
+		u32 net_addr_write    : 1;
+		u32 reserved3         :11;
+	} net_buf_reg_718;
+
+	struct {
+		u32 wan_speed_sig     : 2;
+		u32 reserved1         : 6;
+		u32 wan_wait_state    : 8;
+		u32 sram_chip         : 2;
+		u32 sram_memmap       : 2;
+		u32 reserved2         : 4;
+		u32 wan_pkt_frame     : 4;
+		u32 reserved3         : 4;
+	} wan_ctrl_reg_71c;
+} flexcop_ibi_value;
+
+extern flexcop_ibi_value ibi_zero;
+
+typedef enum {
+	FC_I2C_PORT_DEMOD  = 1,
+	FC_I2C_PORT_EEPROM = 2,
+	FC_I2C_PORT_TUNER  = 3,
+} flexcop_i2c_port_t;
+
+typedef enum {
+	FC_WRITE = 0,
+	FC_READ  = 1,
+} flexcop_access_op_t;
+
+typedef enum {
+	FC_SRAM_DEST_NET   = 1,
+	FC_SRAM_DEST_CAI   = 2,
+	FC_SRAM_DEST_CAO   = 4,
+	FC_SRAM_DEST_MEDIA = 8
+} flexcop_sram_dest_t;
+
+typedef enum {
+	FC_SRAM_DEST_TARGET_WAN_USB = 0,
+	FC_SRAM_DEST_TARGET_DMA1    = 1,
+	FC_SRAM_DEST_TARGET_DMA2    = 2,
+	FC_SRAM_DEST_TARGET_FC3_CA  = 3
+} flexcop_sram_dest_target_t;
+
+typedef enum {
+	FC_SRAM_2_32KB  = 0, /*  64KB */
+	FC_SRAM_1_32KB  = 1, /*  32KB - default fow FCII */
+	FC_SRAM_1_128KB = 2, /* 128KB */
+	FC_SRAM_1_48KB  = 3, /*  48KB - default for FCIII */
+} flexcop_sram_type_t;
+
+typedef enum {
+	FC_WAN_SPEED_4MBITS  = 0,
+	FC_WAN_SPEED_8MBITS  = 1,
+	FC_WAN_SPEED_12MBITS = 2,
+	FC_WAN_SPEED_16MBITS = 3,
+} flexcop_wan_speed_t;
+
+typedef enum {
+	FC_DMA_1 = 1,
+	FC_DMA_2 = 2,
+} flexcop_dma_index_t;
+
+typedef enum {
+	FC_DMA_SUBADDR_0 = 1,
+	FC_DMA_SUBADDR_1 = 2,
+} flexcop_dma_addr_index_t;
+
+/* names of the particular registers */
+typedef enum {
+	dma1_000            = 0x000,
+	dma1_004            = 0x004,
+	dma1_008            = 0x008,
+	dma1_00c            = 0x00c,
+	dma2_010            = 0x010,
+	dma2_014            = 0x014,
+	dma2_018            = 0x018,
+	dma2_01c            = 0x01c,
+
+	tw_sm_c_100         = 0x100,
+	tw_sm_c_104         = 0x104,
+	tw_sm_c_108         = 0x108,
+	tw_sm_c_10c         = 0x10c,
+	tw_sm_c_110         = 0x110,
+
+	lnb_switch_freq_200 = 0x200,
+	misc_204            = 0x204,
+	ctrl_208            = 0x208,
+	irq_20c             = 0x20c,
+	sw_reset_210        = 0x210,
+	misc_214            = 0x214,
+	mbox_v8_to_host_218 = 0x218,
+	mbox_host_to_v8_21c = 0x21c,
+
+	pid_filter_300      = 0x300,
+	pid_filter_304      = 0x304,
+	pid_filter_308      = 0x308,
+	pid_filter_30c      = 0x30c,
+	index_reg_310       = 0x310,
+	pid_n_reg_314       = 0x314,
+	mac_low_reg_318     = 0x318,
+	mac_high_reg_31c    = 0x31c,
+
+	data_tag_400        = 0x400,
+	card_id_408         = 0x408,
+	card_id_40c         = 0x40c,
+	mac_address_418     = 0x418,
+	mac_address_41c     = 0x41c,
+
+	ci_600              = 0x600,
+	pi_604              = 0x604,
+	pi_608              = 0x608,
+	dvb_reg_60c         = 0x60c,
+
+	sram_ctrl_reg_700   = 0x700,
+	net_buf_reg_704     = 0x704,
+	cai_buf_reg_708     = 0x708,
+	cao_buf_reg_70c     = 0x70c,
+	media_buf_reg_710   = 0x710,
+	sram_dest_reg_714   = 0x714,
+	net_buf_reg_718     = 0x718,
+	wan_ctrl_reg_71c    = 0x71c,
+} flexcop_ibi_register;
+
+#define flexcop_set_ibi_value(reg,attr,val) { \
+	flexcop_ibi_value v = fc->read_ibi_reg(fc,reg); \
+	v.reg.attr = val; \
+	fc->write_ibi_reg(fc,reg,v); \
+}
+
+#endif
diff --git a/drivers/media/dvb/b2c2/flexcop-sram.c b/drivers/media/dvb/b2c2/flexcop-sram.c
new file mode 100644
index 0000000..01570ec
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-sram.c
@@ -0,0 +1,403 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-sram.c - functions for controlling the SRAM.
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+static void flexcop_sram_set_chip (struct flexcop_device *fc, flexcop_sram_type_t type)
+{
+	flexcop_set_ibi_value(wan_ctrl_reg_71c,sram_chip,type);
+}
+
+int flexcop_sram_init(struct flexcop_device *fc)
+{
+	switch (fc->rev) {
+		case FLEXCOP_II:
+		case FLEXCOP_IIB:
+			flexcop_sram_set_chip(fc,FC_SRAM_1_32KB);
+			break;
+		case FLEXCOP_III:
+			flexcop_sram_set_chip(fc,FC_SRAM_1_48KB);
+			break;
+		default:
+			return -EINVAL;
+	}
+	return 0;
+}
+
+int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target)
+{
+	flexcop_ibi_value v;
+
+	v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+
+	if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) {
+		err("SRAM destination target to available on FlexCopII(b)\n");
+		return -EINVAL;
+	}
+
+	deb_sram("sram dest: %x target: %x\n",dest, target);
+
+	if (dest & FC_SRAM_DEST_NET)
+		v.sram_dest_reg_714.NET_Dest = target;
+	if (dest & FC_SRAM_DEST_CAI)
+		v.sram_dest_reg_714.CAI_Dest = target;
+	if (dest & FC_SRAM_DEST_CAO)
+		v.sram_dest_reg_714.CAO_Dest = target;
+	if (dest & FC_SRAM_DEST_MEDIA)
+		v.sram_dest_reg_714.MEDIA_Dest = target;
+
+	fc->write_ibi_reg(fc,sram_dest_reg_714,v);
+	udelay(1000); /* TODO delay really necessary */
+
+	return 0;
+}
+EXPORT_SYMBOL(flexcop_sram_set_dest);
+
+void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s)
+{
+	flexcop_set_ibi_value(wan_ctrl_reg_71c,wan_speed_sig,s);
+}
+EXPORT_SYMBOL(flexcop_wan_set_speed);
+
+void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill)
+{
+	flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+	v.sram_dest_reg_714.ctrl_usb_wan = usb_wan;
+	v.sram_dest_reg_714.ctrl_sramdma = sramdma;
+	v.sram_dest_reg_714.ctrl_maximumfill = maximumfill;
+	fc->write_ibi_reg(fc,sram_dest_reg_714,v);
+}
+EXPORT_SYMBOL(flexcop_sram_ctrl);
+
+#if 0
+static void flexcop_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
+{
+	int i, retries;
+	u32 command;
+
+	for (i = 0; i < len; i++) {
+		command = bank | addr | 0x04000000 | (*buf << 0x10);
+
+		retries = 2;
+
+		while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+			mdelay(1);
+			retries--;
+		};
+
+		if (retries == 0)
+			printk("%s: SRAM timeout\n", __FUNCTION__);
+
+		write_reg_dw(adapter, 0x700, command);
+
+		buf++;
+		addr++;
+	}
+}
+
+static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
+{
+	int i, retries;
+	u32 command, value;
+
+	for (i = 0; i < len; i++) {
+		command = bank | addr | 0x04008000;
+
+		retries = 10000;
+
+		while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+			mdelay(1);
+			retries--;
+		};
+
+		if (retries == 0)
+			printk("%s: SRAM timeout\n", __FUNCTION__);
+
+		write_reg_dw(adapter, 0x700, command);
+
+		retries = 10000;
+
+		while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+			mdelay(1);
+			retries--;
+		};
+
+		if (retries == 0)
+			printk("%s: SRAM timeout\n", __FUNCTION__);
+
+		value = read_reg_dw(adapter, 0x700) >> 0x10;
+
+		*buf = (value & 0xff);
+
+		addr++;
+		buf++;
+	}
+}
+
+static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
+{
+	u32 bank;
+
+	bank = 0;
+
+	if (adapter->dw_sram_type == 0x20000) {
+		bank = (addr & 0x18000) << 0x0d;
+	}
+
+	if (adapter->dw_sram_type == 0x00000) {
+		if ((addr >> 0x0f) == 0)
+			bank = 0x20000000;
+		else
+			bank = 0x10000000;
+	}
+
+	flex_sram_write(adapter, bank, addr & 0x7fff, buf, len);
+}
+
+static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
+{
+	u32 bank;
+
+	bank = 0;
+
+	if (adapter->dw_sram_type == 0x20000) {
+		bank = (addr & 0x18000) << 0x0d;
+	}
+
+	if (adapter->dw_sram_type == 0x00000) {
+		if ((addr >> 0x0f) == 0)
+			bank = 0x20000000;
+		else
+			bank = 0x10000000;
+	}
+
+	flex_sram_read(adapter, bank, addr & 0x7fff, buf, len);
+}
+
+static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
+{
+	u32 length;
+
+	while (len != 0) {
+		length = len;
+
+		// check if the address range belongs to the same
+		// 32K memory chip. If not, the data is read from
+		// one chip at a time.
+		if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
+			length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
+		}
+
+		sram_read_chunk(adapter, addr, buf, length);
+
+		addr = addr + length;
+		buf = buf + length;
+		len = len - length;
+	}
+}
+
+static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
+{
+	u32 length;
+
+	while (len != 0) {
+		length = len;
+
+		// check if the address range belongs to the same
+		// 32K memory chip. If not, the data is written to
+		// one chip at a time.
+		if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
+			length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
+		}
+
+		sram_write_chunk(adapter, addr, buf, length);
+
+		addr = addr + length;
+		buf = buf + length;
+		len = len - length;
+	}
+}
+
+static void sram_set_size(struct adapter *adapter, u32 mask)
+{
+	write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c))));
+}
+
+static void sram_init(struct adapter *adapter)
+{
+	u32 tmp;
+
+	tmp = read_reg_dw(adapter, 0x71c);
+
+	write_reg_dw(adapter, 0x71c, 1);
+
+	if (read_reg_dw(adapter, 0x71c) != 0) {
+		write_reg_dw(adapter, 0x71c, tmp);
+
+		adapter->dw_sram_type = tmp & 0x30000;
+
+		ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type);
+
+	} else {
+
+		adapter->dw_sram_type = 0x10000;
+
+		ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type);
+	}
+
+	/* return value is never used? */
+/*	return adapter->dw_sram_type; */
+}
+
+static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
+{
+	u8 tmp1, tmp2;
+
+	dprintk("%s: mask = %x, addr = %x\n", __FUNCTION__, mask, addr);
+
+	sram_set_size(adapter, mask);
+	sram_init(adapter);
+
+	tmp2 = 0xa5;
+	tmp1 = 0x4f;
+
+	sram_write(adapter, addr, &tmp2, 1);
+	sram_write(adapter, addr + 4, &tmp1, 1);
+
+	tmp2 = 0;
+
+	mdelay(20);
+
+	sram_read(adapter, addr, &tmp2, 1);
+	sram_read(adapter, addr, &tmp2, 1);
+
+	dprintk("%s: wrote 0xa5, read 0x%2x\n", __FUNCTION__, tmp2);
+
+	if (tmp2 != 0xa5)
+		return 0;
+
+	tmp2 = 0x5a;
+	tmp1 = 0xf4;
+
+	sram_write(adapter, addr, &tmp2, 1);
+	sram_write(adapter, addr + 4, &tmp1, 1);
+
+	tmp2 = 0;
+
+	mdelay(20);
+
+	sram_read(adapter, addr, &tmp2, 1);
+	sram_read(adapter, addr, &tmp2, 1);
+
+	dprintk("%s: wrote 0x5a, read 0x%2x\n", __FUNCTION__, tmp2);
+
+	if (tmp2 != 0x5a)
+		return 0;
+
+	return 1;
+}
+
+static u32 sram_length(struct adapter *adapter)
+{
+	if (adapter->dw_sram_type == 0x10000)
+		return 32768;	//  32K
+	if (adapter->dw_sram_type == 0x00000)
+		return 65536;	//  64K
+	if (adapter->dw_sram_type == 0x20000)
+		return 131072;	// 128K
+
+	return 32768;		// 32K
+}
+
+/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory.
+    - for 128K there are 4x32K chips at bank 0,1,2,3.
+    - for  64K there are 2x32K chips at bank 1,2.
+    - for  32K there is one 32K chip at bank 0.
+
+   FlexCop works only with one bank at a time. The bank is selected
+   by bits 28-29 of the 0x700 register.
+
+   bank 0 covers addresses 0x00000-0x07fff
+   bank 1 covers addresses 0x08000-0x0ffff
+   bank 2 covers addresses 0x10000-0x17fff
+   bank 3 covers addresses 0x18000-0x1ffff
+*/
+
+static int flexcop_sram_detect(struct flexcop_device *fc)
+{
+	flexcop_ibi_value r208,r71c_0,vr71c_1;
+
+	r208 = fc->read_ibi_reg(fc, ctrl_208);
+	fc->write_ibi_reg(fc, ctrl_208, ibi_zero);
+
+	r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c);
+
+	write_reg_dw(adapter, 0x71c, 1);
+
+	tmp3 = read_reg_dw(adapter, 0x71c);
+
+	dprintk("%s: tmp3 = %x\n", __FUNCTION__, tmp3);
+
+	write_reg_dw(adapter, 0x71c, tmp2);
+
+	// check for internal SRAM ???
+	tmp3--;
+	if (tmp3 != 0) {
+		sram_set_size(adapter, 0x10000);
+		sram_init(adapter);
+		write_reg_dw(adapter, 0x208, tmp);
+
+		dprintk("%s: sram size = 32K\n", __FUNCTION__);
+
+		return 32;
+	}
+
+	if (sram_test_location(adapter, 0x20000, 0x18000) != 0) {
+		sram_set_size(adapter, 0x20000);
+		sram_init(adapter);
+		write_reg_dw(adapter, 0x208, tmp);
+
+		dprintk("%s: sram size = 128K\n", __FUNCTION__);
+
+		return 128;
+	}
+
+	if (sram_test_location(adapter, 0x00000, 0x10000) != 0) {
+		sram_set_size(adapter, 0x00000);
+		sram_init(adapter);
+		write_reg_dw(adapter, 0x208, tmp);
+
+		dprintk("%s: sram size = 64K\n", __FUNCTION__);
+
+		return 64;
+	}
+
+	if (sram_test_location(adapter, 0x10000, 0x00000) != 0) {
+		sram_set_size(adapter, 0x10000);
+		sram_init(adapter);
+		write_reg_dw(adapter, 0x208, tmp);
+
+		dprintk("%s: sram size = 32K\n", __FUNCTION__);
+
+		return 32;
+	}
+
+	sram_set_size(adapter, 0x10000);
+	sram_init(adapter);
+	write_reg_dw(adapter, 0x208, tmp);
+
+	dprintk("%s: SRAM detection failed. Set to 32K \n", __FUNCTION__);
+
+	return 0;
+}
+
+static void sll_detect_sram_size(struct adapter *adapter)
+{
+	sram_detect_for_flex2(adapter);
+}
+
+#endif
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c
new file mode 100644
index 0000000..0113449
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-usb.c
@@ -0,0 +1,577 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-usb.c - covers the USB part.
+ *
+ * see flexcop.c for copyright information.
+ */
+
+#define FC_LOG_PREFIX "flexcop_usb"
+#include "flexcop-usb.h"
+#include "flexcop-common.h"
+
+/* Version information */
+#define DRIVER_VERSION "0.1"
+#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
+
+/* debug */
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define dprintk(level,args...) \
+	    do { if ((debug & level)) { printk(args); } } while (0)
+#define debug_dump(b,l,method) {\
+	int i; \
+	for (i = 0; i < l; i++) method("%02x ", b[i]); \
+	method("\n");\
+}
+
+#define DEBSTATUS ""
+#else
+#define dprintk(level,args...)
+#define debug_dump(b,l,method)
+#define DEBSTATUS " (debugging is not enabled)"
+#endif
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
+#undef DEBSTATUS
+
+#define deb_info(args...) dprintk(0x01,args)
+#define deb_ts(args...)   dprintk(0x02,args)
+#define deb_ctrl(args...) dprintk(0x04,args)
+#define deb_i2c(args...)  dprintk(0x08,args)
+#define deb_v8(args...)   dprintk(0x10,args)
+
+/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
+ * in the IBI address, to make the V8 code simpler.
+ * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used)
+ *                  in general: 0000 0HHH 000L LL00
+ * IBI ADDRESS FORMAT:                    RHHH BLLL
+ *
+ * where R is the read(1)/write(0) bit, B is the busy bit
+ * and HHH and LLL are the two sets of three bits from the PCI address.
+ */
+#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
+#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
+
+/*
+ * DKT 020228
+ * - forget about this VENDOR_BUFFER_SIZE, read and write register
+ *   deal with DWORD or 4 bytes, that should be should from now on
+ * - from now on, we don't support anything older than firm 1.00
+ *   I eliminated the write register as a 2 trip of writing hi word and lo word
+ *   and force this to write only 4 bytes at a time.
+ *   NOTE: this should work with all the firmware from 1.00 and newer
+ */
+static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read)
+{
+	struct flexcop_usb *fc_usb = fc->bus_specific;
+	u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG;
+	u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
+	u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | (read ? 0x80 : 0);
+
+	int len = usb_control_msg(fc_usb->udev,
+			read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
+			request,
+			request_type,  /* 0xc0 read or 0x40 write*/
+			wAddress,
+			0,
+			val,
+			sizeof(u32),
+			B2C2_WAIT_FOR_OPERATION_RDW * HZ);
+
+	if (len != sizeof(u32)) {
+		err("error while %s dword from %d (%d).",read ? "reading" : "writing",
+			wAddress,wRegOffsPCI);
+		return -EIO;
+	}
+	return 0;
+}
+
+/*
+ * DKT 010817 - add support for V8 memory read/write and flash update
+ */
+static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
+		flexcop_usb_request_t req, u8 page, u16 wAddress,
+		u8 *pbBuffer,u32 buflen)
+{
+//	u8 dwRequestType;
+	u8 request_type = USB_TYPE_VENDOR;
+	u16 wIndex;
+	int nWaitTime,pipe,len;
+
+	wIndex = page << 8;
+
+	switch (req) {
+		case B2C2_USB_READ_V8_MEM:
+			nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
+			request_type |= USB_DIR_IN;
+//			dwRequestType = (u8) RTYPE_READ_V8_MEMORY;
+			pipe = B2C2_USB_CTRL_PIPE_IN;
+		break;
+		case B2C2_USB_WRITE_V8_MEM:
+			wIndex |= pbBuffer[0];
+			request_type |= USB_DIR_OUT;
+			nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
+//			dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY;
+			pipe = B2C2_USB_CTRL_PIPE_OUT;
+		break;
+		case B2C2_USB_FLASH_BLOCK:
+			request_type |= USB_DIR_OUT;
+			nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
+//			dwRequestType = (u8) RTYPE_WRITE_V8_FLASH;
+			pipe = B2C2_USB_CTRL_PIPE_OUT;
+		break;
+		default:
+			deb_info("unsupported request for v8_mem_req %x.\n",req);
+		return -EINVAL;
+	}
+	deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n",request_type,req,
+			wAddress,wIndex,buflen);
+
+	len = usb_control_msg(fc_usb->udev,pipe,
+			req,
+			request_type,
+			wAddress,
+			wIndex,
+			pbBuffer,
+			buflen,
+			nWaitTime * HZ);
+
+	debug_dump(pbBuffer,len,deb_v8);
+
+	return len == buflen ? 0 : -EIO;
+}
+
+#define bytes_left_to_read_on_page(paddr,buflen) \
+			((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
+			? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
+
+static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,flexcop_usb_request_t req,
+		flexcop_usb_mem_page_t page_start, u32 addr, int extended, u8 *buf, u32 len)
+{
+	int i,ret = 0;
+	u16 wMax;
+	u32 pagechunk = 0;
+
+	switch(req) {
+		case B2C2_USB_READ_V8_MEM:  wMax = USB_MEM_READ_MAX; break;
+		case B2C2_USB_WRITE_V8_MEM:	wMax = USB_MEM_WRITE_MAX; break;
+		case B2C2_USB_FLASH_BLOCK:  wMax = USB_FLASH_MAX; break;
+		default:
+			return -EINVAL;
+		break;
+	}
+	for (i = 0; i < len;) {
+		pagechunk = wMax < bytes_left_to_read_on_page(addr,len) ? wMax : bytes_left_to_read_on_page(addr,len);
+		deb_info("%x\n",(addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended));
+		if ((ret = flexcop_usb_v8_memory_req(fc_usb,req,
+				page_start + (addr / V8_MEMORY_PAGE_SIZE), /* actual page */
+				(addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended),
+				&buf[i],pagechunk)) < 0)
+			return ret;
+
+		addr += pagechunk;
+		len -= pagechunk;
+	}
+	return 0;
+}
+
+static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
+{
+	return flexcop_usb_memory_req(fc->bus_specific,B2C2_USB_READ_V8_MEM,
+			V8_MEMORY_PAGE_FLASH,0x1f010,1,fc->dvb_adapter.proposed_mac,6);
+}
+
+#if 0
+static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set,
+		flexcop_usb_utility_function_t func, u8 extra, u16 wIndex,
+		u16 buflen, u8 *pvBuffer)
+{
+	u16 wValue;
+	u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR;
+//	u8 dwRequestType = (u8) RTYPE_GENERIC,
+	int nWaitTime = 2,
+		pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN,
+		len;
+
+	wValue = (func << 8) | extra;
+
+	len = usb_control_msg(fc_usb->udev,pipe,
+			B2C2_USB_UTILITY,
+			request_type,
+			wValue,
+			wIndex,
+			pvBuffer,
+			buflen,
+			nWaitTime * HZ);
+	return len == buflen ? 0 : -EIO;
+}
+#endif
+
+/* usb i2c stuff */
+static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb,
+		flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
+		flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
+{
+	u16 wValue, wIndex;
+	int nWaitTime,pipe,len;
+//	u8 dwRequestType;
+	u8 request_type = USB_TYPE_VENDOR;
+
+	switch (func) {
+		case USB_FUNC_I2C_WRITE:
+		case USB_FUNC_I2C_MULTIWRITE:
+		case USB_FUNC_I2C_REPEATWRITE:
+		/* DKT 020208 - add this to support special case of DiSEqC */
+		case USB_FUNC_I2C_CHECKWRITE:
+			pipe = B2C2_USB_CTRL_PIPE_OUT;
+			nWaitTime = 2;
+//			dwRequestType = (u8) RTYPE_GENERIC;
+			request_type |= USB_DIR_OUT;
+		break;
+		case USB_FUNC_I2C_READ:
+		case USB_FUNC_I2C_REPEATREAD:
+			pipe = B2C2_USB_CTRL_PIPE_IN;
+			nWaitTime = 2;
+//			dwRequestType = (u8) RTYPE_GENERIC;
+			request_type |= USB_DIR_IN;
+		break;
+		default:
+			deb_info("unsupported function for i2c_req %x\n",func);
+			return -EINVAL;
+	}
+	wValue = (func << 8 ) | (port << 4);
+	wIndex = (chipaddr << 8 ) | addr;
+
+	deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req,
+			((wValue && 0xff) << 8),wValue >> 8,((wIndex && 0xff) << 8),wIndex >> 8);
+
+	len = usb_control_msg(fc_usb->udev,pipe,
+			req,
+			request_type,
+			wValue,
+			wIndex,
+			buf,
+			buflen,
+			nWaitTime * HZ);
+
+	return len == buflen ? 0 : -EREMOTEIO;
+}
+
+/* actual bus specific access functions, make sure prototype are/will be equal to pci */
+static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg)
+{
+	flexcop_ibi_value val;
+	val.raw = 0;
+	flexcop_usb_readwrite_dw(fc,reg, &val.raw, 1);
+	return val;
+}
+
+static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg, flexcop_ibi_value val)
+{
+	return flexcop_usb_readwrite_dw(fc,reg, &val.raw, 0);
+}
+
+static int flexcop_usb_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
+		flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+{
+	if (op == FC_READ)
+		return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_READ,port,chipaddr,addr,buf,len);
+	else
+		return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_WRITE,port,chipaddr,addr,buf,len);
+}
+
+static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb, u8 *buffer, int buffer_length)
+{
+	u8 *b;
+	int l;
+
+	deb_ts("tmp_buffer_length=%d, buffer_length=%d\n", fc_usb->tmp_buffer_length, buffer_length);
+
+	if (fc_usb->tmp_buffer_length > 0) {
+		memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer, buffer_length);
+		fc_usb->tmp_buffer_length += buffer_length;
+		b = fc_usb->tmp_buffer;
+		l = fc_usb->tmp_buffer_length;
+	} else {
+		b=buffer;
+		l=buffer_length;
+	}
+
+	while (l >= 190) {
+		if (*b == 0xff)
+			switch (*(b+1) & 0x03) {
+				case 0x01: /* media packet */
+					if ( *(b+2) == 0x47 )
+						flexcop_pass_dmx_packets(fc_usb->fc_dev, b+2, 1);
+					else
+						deb_ts("not ts packet %02x %02x %02x %02x \n", *(b+2), *(b+3), *(b+4), *(b+5) );
+
+					b += 190;
+					l -= 190;
+				break;
+				default:
+					deb_ts("wrong packet type\n");
+					l = 0;
+				break;
+			}
+		else {
+			deb_ts("wrong header\n");
+			l = 0;
+		}
+	}
+
+	if (l>0)
+		memcpy(fc_usb->tmp_buffer, b, l);
+	fc_usb->tmp_buffer_length = l;
+}
+
+static void flexcop_usb_urb_complete(struct urb *urb, struct pt_regs *ptregs)
+{
+	struct flexcop_usb *fc_usb = urb->context;
+	int i;
+
+	if (urb->actual_length > 0)
+		deb_ts("urb completed, bufsize: %d actlen; %d\n",urb->transfer_buffer_length, urb->actual_length);
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		if (urb->iso_frame_desc[i].status < 0) {
+			err("iso frame descriptor %d has an error: %d\n",i,urb->iso_frame_desc[i].status);
+		} else
+			if (urb->iso_frame_desc[i].actual_length > 0) {
+				deb_ts("passed %d bytes to the demux\n",urb->iso_frame_desc[i].actual_length);
+
+				flexcop_usb_process_frame(fc_usb,
+					urb->transfer_buffer + urb->iso_frame_desc[i].offset,
+					urb->iso_frame_desc[i].actual_length);
+		}
+		urb->iso_frame_desc[i].status = 0;
+		urb->iso_frame_desc[i].actual_length = 0;
+	}
+
+	usb_submit_urb(urb,GFP_ATOMIC);
+}
+
+static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff)
+{
+	/* submit/kill iso packets */
+	return 0;
+}
+
+static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb)
+{
+	int i;
+	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
+		if (fc_usb->iso_urb[i] != NULL) {
+			deb_ts("unlinking/killing urb no. %d\n",i);
+			usb_kill_urb(fc_usb->iso_urb[i]);
+			usb_free_urb(fc_usb->iso_urb[i]);
+		}
+
+	if (fc_usb->iso_buffer != NULL)
+		pci_free_consistent(NULL,fc_usb->buffer_size, fc_usb->iso_buffer, fc_usb->dma_addr);
+}
+
+static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
+{
+	u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize;
+	int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
+	int buffer_offset = 0;
+
+	deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
+			B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize);
+
+	fc_usb->iso_buffer = pci_alloc_consistent(NULL,bufsize,&fc_usb->dma_addr);
+	if (fc_usb->iso_buffer == NULL)
+		return -ENOMEM;
+	memset(fc_usb->iso_buffer, 0, bufsize);
+	fc_usb->buffer_size = bufsize;
+
+	/* creating iso urbs */
+	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
+		if (!(fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) {
+			ret = -ENOMEM;
+			goto urb_error;
+		}
+	/* initialising and submitting iso urbs */
+	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
+		int frame_offset = 0;
+		struct urb *urb = fc_usb->iso_urb[i];
+		deb_ts("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset);
+
+		urb->dev = fc_usb->udev;
+		urb->context = fc_usb;
+		urb->complete = flexcop_usb_urb_complete;
+		urb->pipe = B2C2_USB_DATA_PIPE;
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->interval = 1;
+		urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
+		urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
+		urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset;
+
+		buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
+		for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
+			deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset);
+			urb->iso_frame_desc[j].offset = frame_offset;
+			urb->iso_frame_desc[j].length = frame_size;
+			frame_offset += frame_size;
+		}
+
+		if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
+			err("submitting urb %d failed with %d.",i,ret);
+			goto urb_error;
+		}
+		deb_ts("submitted urb no. %d.\n",i);
+	}
+
+/* SRAM */
+
+	flexcop_sram_set_dest(fc_usb->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET |
+			FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_WAN_USB);
+	flexcop_wan_set_speed(fc_usb->fc_dev,FC_WAN_SPEED_8MBITS);
+	flexcop_sram_ctrl(fc_usb->fc_dev,1,1,1);
+
+	ret = 0;
+	goto success;
+urb_error:
+	flexcop_usb_transfer_exit(fc_usb);
+success:
+	return ret;
+}
+
+static int flexcop_usb_init(struct flexcop_usb *fc_usb)
+{
+	/* use the alternate setting with the larges buffer */
+	usb_set_interface(fc_usb->udev,0,1);
+	switch (fc_usb->udev->speed) {
+		case USB_SPEED_LOW:
+			err("cannot handle USB speed because it is to sLOW.");
+			return -ENODEV;
+			break;
+		case USB_SPEED_FULL:
+			info("running at FULL speed.");
+			break;
+		case USB_SPEED_HIGH:
+			info("running at HIGH speed.");
+			break;
+		case USB_SPEED_UNKNOWN: /* fall through */
+		default:
+			err("cannot handle USB speed because it is unkown.");
+			return -ENODEV;
+	}
+	usb_set_intfdata(fc_usb->uintf, fc_usb);
+	return 0;
+}
+
+static void flexcop_usb_exit(struct flexcop_usb *fc_usb)
+{
+	usb_set_intfdata(fc_usb->uintf, NULL);
+}
+
+static int flexcop_usb_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct flexcop_usb *fc_usb = NULL;
+	struct flexcop_device *fc = NULL;
+	int ret;
+
+	if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
+		err("out of memory\n");
+		return -ENOMEM;
+	}
+
+/* general flexcop init */
+	fc_usb = fc->bus_specific;
+	fc_usb->fc_dev = fc;
+
+	fc->read_ibi_reg  = flexcop_usb_read_ibi_reg;
+	fc->write_ibi_reg = flexcop_usb_write_ibi_reg;
+	fc->i2c_request = flexcop_usb_i2c_request;
+	fc->get_mac_addr = flexcop_usb_get_mac_addr;
+
+	fc->stream_control = flexcop_usb_stream_control;
+
+	fc->pid_filtering = 1;
+	fc->bus_type = FC_USB;
+
+	fc->dev = &udev->dev;
+	fc->owner = THIS_MODULE;
+
+/* bus specific part */
+	fc_usb->udev = udev;
+	fc_usb->uintf = intf;
+	if ((ret = flexcop_usb_init(fc_usb)) != 0)
+		goto err_kfree;
+
+/* init flexcop */
+	if ((ret = flexcop_device_initialize(fc)) != 0)
+		goto err_usb_exit;
+
+/* xfer init */
+	if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0)
+		goto err_fc_exit;
+
+	info("%s successfully initialized and connected.",DRIVER_NAME);
+	ret = 0;
+	goto success;
+err_fc_exit:
+	flexcop_device_exit(fc);
+err_usb_exit:
+	flexcop_usb_exit(fc_usb);
+err_kfree:
+	flexcop_device_kfree(fc);
+success:
+	return ret;
+}
+
+static void flexcop_usb_disconnect(struct usb_interface *intf)
+{
+	struct flexcop_usb *fc_usb = usb_get_intfdata(intf);
+	flexcop_usb_transfer_exit(fc_usb);
+	flexcop_device_exit(fc_usb->fc_dev);
+	flexcop_usb_exit(fc_usb);
+	flexcop_device_kfree(fc_usb->fc_dev);
+	info("%s successfully deinitialized and disconnected.",DRIVER_NAME);
+}
+
+static struct usb_device_id flexcop_usb_table [] = {
+	    { USB_DEVICE(0x0af7, 0x0101) },
+	    { }
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver flexcop_usb_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "Technisat/B2C2 FlexCop II/IIb/III USB",
+	.probe		= flexcop_usb_probe,
+	.disconnect = flexcop_usb_disconnect,
+	.id_table	= flexcop_usb_table,
+};
+
+/* module stuff */
+static int __init flexcop_usb_module_init(void)
+{
+	int result;
+	if ((result = usb_register(&flexcop_usb_driver))) {
+		err("usb_register failed. (%d)",result);
+		return result;
+	}
+
+	return 0;
+}
+
+static void __exit flexcop_usb_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&flexcop_usb_driver);
+}
+
+module_init(flexcop_usb_module_init);
+module_exit(flexcop_usb_module_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_NAME);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.h b/drivers/media/dvb/b2c2/flexcop-usb.h
new file mode 100644
index 0000000..630e647
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-usb.h
@@ -0,0 +1,119 @@
+#ifndef __FLEXCOP_USB_H_INCLUDED__
+#define __FLEXCOP_USB_H_INCLUDED__
+
+#include <linux/usb.h>
+
+/* transfer parameters */
+#define B2C2_USB_FRAMES_PER_ISO		4
+#define B2C2_USB_NUM_ISO_URB		4
+
+#define B2C2_USB_CTRL_PIPE_IN		usb_rcvctrlpipe(fc_usb->udev,0)
+#define B2C2_USB_CTRL_PIPE_OUT		usb_sndctrlpipe(fc_usb->udev,0)
+#define B2C2_USB_DATA_PIPE			usb_rcvisocpipe(fc_usb->udev,0x81)
+
+struct flexcop_usb {
+	struct usb_device *udev;
+	struct usb_interface *uintf;
+
+	u8 *iso_buffer;
+	int buffer_size;
+	dma_addr_t dma_addr;
+	struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
+
+	struct flexcop_device *fc_dev;
+
+	u8 tmp_buffer[1023+190];
+	int tmp_buffer_length;
+};
+
+#if 0
+/* request types TODO What is its use?*/
+typedef enum {
+
+/* something is wrong with this part
+	RTYPE_READ_DW         = (1 << 6),
+	RTYPE_WRITE_DW_1      = (3 << 6),
+	RTYPE_READ_V8_MEMORY  = (6 << 6),
+	RTYPE_WRITE_V8_MEMORY = (7 << 6),
+	RTYPE_WRITE_V8_FLASH  = (8 << 6),
+	RTYPE_GENERIC         = (9 << 6),
+*/
+} flexcop_usb_request_type_t;
+#endif
+
+/* request */
+typedef enum {
+	B2C2_USB_WRITE_V8_MEM = 0x04,
+	B2C2_USB_READ_V8_MEM  = 0x05,
+	B2C2_USB_READ_REG     = 0x08,
+	B2C2_USB_WRITE_REG    = 0x0A,
+/*	B2C2_USB_WRITEREGLO   = 0x0A, */
+	B2C2_USB_WRITEREGHI   = 0x0B,
+	B2C2_USB_FLASH_BLOCK  = 0x10,
+	B2C2_USB_I2C_REQUEST  = 0x11,
+	B2C2_USB_UTILITY      = 0x12,
+} flexcop_usb_request_t;
+
+/* function definition for I2C_REQUEST */
+typedef enum {
+	USB_FUNC_I2C_WRITE       = 0x01,
+	USB_FUNC_I2C_MULTIWRITE  = 0x02,
+	USB_FUNC_I2C_READ        = 0x03,
+	USB_FUNC_I2C_REPEATWRITE = 0x04,
+	USB_FUNC_GET_DESCRIPTOR  = 0x05,
+	USB_FUNC_I2C_REPEATREAD  = 0x06,
+/* DKT 020208 - add this to support special case of DiSEqC */
+	USB_FUNC_I2C_CHECKWRITE  = 0x07,
+	USB_FUNC_I2C_CHECKRESULT = 0x08,
+} flexcop_usb_i2c_function_t;
+
+/*
+ * function definition for UTILITY request 0x12
+ * DKT 020304 - new utility function
+ */
+typedef enum {
+	UTILITY_SET_FILTER          = 0x01,
+	UTILITY_DATA_ENABLE         = 0x02,
+	UTILITY_FLEX_MULTIWRITE     = 0x03,
+	UTILITY_SET_BUFFER_SIZE     = 0x04,
+	UTILITY_FLEX_OPERATOR       = 0x05,
+	UTILITY_FLEX_RESET300_START = 0x06,
+	UTILITY_FLEX_RESET300_STOP  = 0x07,
+	UTILITY_FLEX_RESET300       = 0x08,
+	UTILITY_SET_ISO_SIZE        = 0x09,
+	UTILITY_DATA_RESET          = 0x0A,
+	UTILITY_GET_DATA_STATUS     = 0x10,
+	UTILITY_GET_V8_REG          = 0x11,
+/* DKT 020326 - add function for v1.14 */
+	UTILITY_SRAM_WRITE          = 0x12,
+	UTILITY_SRAM_READ           = 0x13,
+	UTILITY_SRAM_TESTFILL       = 0x14,
+	UTILITY_SRAM_TESTSET        = 0x15,
+	UTILITY_SRAM_TESTVERIFY     = 0x16,
+} flexcop_usb_utility_function_t;
+
+#define B2C2_WAIT_FOR_OPERATION_RW  1*HZ       /* 1 s */
+#define B2C2_WAIT_FOR_OPERATION_RDW 3*HZ       /* 3 s */
+#define B2C2_WAIT_FOR_OPERATION_WDW 1*HZ       /* 1 s */
+
+#define B2C2_WAIT_FOR_OPERATION_V8READ   3*HZ  /* 3 s */
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE  3*HZ  /* 3 s */
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH  3*HZ  /* 3 s */
+
+typedef enum {
+	V8_MEMORY_PAGE_DVB_CI = 0x20,
+	V8_MEMORY_PAGE_DVB_DS = 0x40,
+	V8_MEMORY_PAGE_MULTI2 = 0x60,
+	V8_MEMORY_PAGE_FLASH  = 0x80
+} flexcop_usb_mem_page_t;
+
+#define V8_MEMORY_EXTENDED      (1 << 15)
+
+#define USB_MEM_READ_MAX                32
+#define USB_MEM_WRITE_MAX               1
+#define USB_FLASH_MAX                   8
+
+#define V8_MEMORY_PAGE_SIZE     0x8000      // 32K
+#define V8_MEMORY_PAGE_MASK     0x7FFF
+
+#endif
diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c
new file mode 100644
index 0000000..8b5d14d
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop.c
@@ -0,0 +1,286 @@
+/*
+ * flexcop.c - driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher <patrick.boettcher@desy.de>
+ *
+ * based on the skystar2-driver
+ * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
+ *
+ * Acknowledgements:
+ *     John Jurrius from BBTI, Inc. for extensive support with
+ *         code examples and data books
+ *
+ *     Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
+ *
+ * Contributions to the skystar2-driver have been done by
+ *     Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
+ *     Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
+ *     Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac filtering)
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include "flexcop.h"
+
+#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de"
+
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define DEBSTATUS ""
+#else
+#define DEBSTATUS " (debugging is not enabled)"
+#endif
+
+int b2c2_flexcop_debug;
+module_param_named(debug, b2c2_flexcop_debug,  int, 0644);
+MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram (|-able))." DEBSTATUS);
+#undef DEBSTATUS
+
+/* global zero for ibi values */
+flexcop_ibi_value ibi_zero;
+
+static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct flexcop_device *fc = dvbdmxfeed->demux->priv;
+	return flexcop_pid_feed_control(fc,dvbdmxfeed,1);
+}
+
+static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct flexcop_device *fc = dvbdmxfeed->demux->priv;
+	return flexcop_pid_feed_control(fc,dvbdmxfeed,0);
+}
+
+static int flexcop_dvb_init(struct flexcop_device *fc)
+{
+	int ret;
+	if ((ret = dvb_register_adapter(&fc->dvb_adapter,"FlexCop Digital TV device",fc->owner)) < 0) {
+		err("error registering DVB adapter");
+		return ret;
+	}
+	fc->dvb_adapter.priv = fc;
+
+	fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
+	fc->demux.priv = fc;
+
+	fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
+
+	fc->demux.start_feed = flexcop_dvb_start_feed;
+	fc->demux.stop_feed = flexcop_dvb_stop_feed;
+	fc->demux.write_to_decoder = NULL;
+
+	if ((ret = dvb_dmx_init(&fc->demux)) < 0) {
+		err("dvb_dmx failed: error %d",ret);
+		goto err_dmx;
+	}
+
+	fc->hw_frontend.source = DMX_FRONTEND_0;
+
+	fc->dmxdev.filternum = fc->demux.feednum;
+	fc->dmxdev.demux = &fc->demux.dmx;
+	fc->dmxdev.capabilities = 0;
+	if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) {
+		err("dvb_dmxdev_init failed: error %d",ret);
+		goto err_dmx_dev;
+	}
+
+	if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
+		err("adding hw_frontend to dmx failed: error %d",ret);
+		goto err_dmx_add_hw_frontend;
+	}
+
+	fc->mem_frontend.source = DMX_MEMORY_FE;
+	if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) {
+		err("adding mem_frontend to dmx failed: error %d",ret);
+		goto err_dmx_add_mem_frontend;
+	}
+
+	if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
+		err("connect frontend failed: error %d",ret);
+		goto err_connect_frontend;
+	}
+
+	dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx);
+
+	fc->init_state |= FC_STATE_DVB_INIT;
+	goto success;
+
+err_connect_frontend:
+	fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
+err_dmx_add_mem_frontend:
+	fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
+err_dmx_add_hw_frontend:
+	dvb_dmxdev_release(&fc->dmxdev);
+err_dmx_dev:
+	dvb_dmx_release(&fc->demux);
+err_dmx:
+	dvb_unregister_adapter(&fc->dvb_adapter);
+	return ret;
+
+success:
+	return 0;
+}
+
+static void flexcop_dvb_exit(struct flexcop_device *fc)
+{
+	if (fc->init_state & FC_STATE_DVB_INIT) {
+		dvb_net_release(&fc->dvbnet);
+
+		fc->demux.dmx.close(&fc->demux.dmx);
+		fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
+		fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
+		dvb_dmxdev_release(&fc->dmxdev);
+		dvb_dmx_release(&fc->demux);
+		dvb_unregister_adapter(&fc->dvb_adapter);
+
+		deb_info("deinitialized dvb stuff\n");
+	}
+	fc->init_state &= ~FC_STATE_DVB_INIT;
+}
+
+/* these methods are necessary to achieve the long-term-goal of hiding the
+ * struct flexcop_device from the bus-parts */
+void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len)
+{
+	dvb_dmx_swfilter(&fc->demux, buf, len);
+}
+EXPORT_SYMBOL(flexcop_pass_dmx_data);
+
+void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no)
+{
+	dvb_dmx_swfilter_packets(&fc->demux, buf, no);
+}
+EXPORT_SYMBOL(flexcop_pass_dmx_packets);
+
+static void flexcop_reset(struct flexcop_device *fc)
+{
+	flexcop_ibi_value v210,v204;
+
+/* reset the flexcop itself */
+	fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
+
+	v210.raw = 0;
+	v210.sw_reset_210.reset_blocks = 0xff;
+	v210.sw_reset_210.Block_reset_enable = 0xb2;
+	fc->write_ibi_reg(fc,sw_reset_210,v210);
+
+/* reset the periphical devices */
+
+	v204 = fc->read_ibi_reg(fc,misc_204);
+	v204.misc_204.Per_reset_sig = 0;
+	fc->write_ibi_reg(fc,misc_204,v204);
+	v204.misc_204.Per_reset_sig = 1;
+	fc->write_ibi_reg(fc,misc_204,v204);
+}
+
+struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
+{
+	void *bus;
+	struct flexcop_device *fc = kmalloc(sizeof(struct flexcop_device), GFP_KERNEL);
+	if (!fc) {
+		err("no memory");
+		return NULL;
+	}
+	memset(fc, 0, sizeof(struct flexcop_device));
+
+	bus = kmalloc(bus_specific_len, GFP_KERNEL);
+	if (!bus) {
+		err("no memory");
+		kfree(fc);
+		return NULL;
+	}
+	memset(bus, 0, bus_specific_len);
+
+	fc->bus_specific = bus;
+
+	return fc;
+}
+EXPORT_SYMBOL(flexcop_device_kmalloc);
+
+void flexcop_device_kfree(struct flexcop_device *fc)
+{
+	kfree(fc->bus_specific);
+	kfree(fc);
+}
+EXPORT_SYMBOL(flexcop_device_kfree);
+
+int flexcop_device_initialize(struct flexcop_device *fc)
+{
+	int ret;
+	ibi_zero.raw = 0;
+
+	flexcop_reset(fc);
+	flexcop_determine_revision(fc);
+	flexcop_sram_init(fc);
+	flexcop_hw_filter_init(fc);
+
+	flexcop_smc_ctrl(fc, 0);
+
+	if ((ret = flexcop_dvb_init(fc)))
+		goto error;
+
+	/* do the MAC address reading after initializing the dvb_adapter */
+	if (fc->get_mac_addr(fc, 0) == 0) {
+		u8 *b = fc->dvb_adapter.proposed_mac;
+		info("MAC address = %02x:%02x:%02x:%02x:%02x:%02x", b[0],b[1],b[2],b[3],b[4],b[5]);
+		flexcop_set_mac_filter(fc,b);
+		flexcop_mac_filter_ctrl(fc,1);
+	} else
+		warn("reading of MAC address failed.\n");
+
+
+	if ((ret = flexcop_i2c_init(fc)))
+		goto error;
+
+	if ((ret = flexcop_frontend_init(fc)))
+		goto error;
+
+	flexcop_device_name(fc,"initialization of","complete");
+
+	ret = 0;
+	goto success;
+error:
+	flexcop_device_exit(fc);
+success:
+	return ret;
+}
+EXPORT_SYMBOL(flexcop_device_initialize);
+
+void flexcop_device_exit(struct flexcop_device *fc)
+{
+	flexcop_frontend_exit(fc);
+	flexcop_i2c_exit(fc);
+	flexcop_dvb_exit(fc);
+}
+EXPORT_SYMBOL(flexcop_device_exit);
+
+static int flexcop_module_init(void)
+{
+	info(DRIVER_NAME " loaded successfully");
+	return 0;
+}
+
+static void flexcop_module_cleanup(void)
+{
+	info(DRIVER_NAME " unloaded successfully");
+}
+
+module_init(flexcop_module_init);
+module_exit(flexcop_module_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_NAME);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/b2c2/flexcop.h b/drivers/media/dvb/b2c2/flexcop.h
new file mode 100644
index 0000000..caa343a
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop.h
@@ -0,0 +1,30 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop.h - private header file for all flexcop-chip-source files.
+ *
+ * see flexcop.c for copyright information.
+ */
+#ifndef __FLEXCOP_H__
+#define __FLEXCOP_H___
+
+#define FC_LOG_PREFIX "b2c2-flexcop"
+#include "flexcop-common.h"
+
+extern int b2c2_flexcop_debug;
+
+/* debug */
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define dprintk(level,args...) \
+	do { if ((b2c2_flexcop_debug & level)) printk(args); } while (0)
+#else
+#define dprintk(level,args...)
+#endif
+
+#define deb_info(args...)  dprintk(0x01,args)
+#define deb_tuner(args...) dprintk(0x02,args)
+#define deb_i2c(args...)   dprintk(0x04,args)
+#define deb_ts(args...)    dprintk(0x08,args)
+#define deb_sram(args...)  dprintk(0x10,args)
+
+#endif
diff --git a/drivers/media/dvb/b2c2/skystar2.c b/drivers/media/dvb/b2c2/skystar2.c
index 336c178..acbc4c3 100644
--- a/drivers/media/dvb/b2c2/skystar2.c
+++ b/drivers/media/dvb/b2c2/skystar2.c
@@ -97,7 +97,7 @@
 	u8 mac_addr[8];
 	u32 dw_sram_type;
 
-	struct dvb_adapter *dvb_adapter;
+	struct dvb_adapter dvb_adapter;
 	struct dvb_demux demux;
 	struct dmxdev dmxdev;
 	struct dmx_frontend hw_frontend;
@@ -2461,7 +2461,7 @@
 		       skystar2->pdev->subsystem_vendor,
 		       skystar2->pdev->subsystem_device);
 	} else {
-		if (dvb_register_frontend(skystar2->dvb_adapter, skystar2->fe)) {
+		if (dvb_register_frontend(&skystar2->dvb_adapter, skystar2->fe)) {
 			printk("skystar2: Frontend registration failed!\n");
 			if (skystar2->fe->ops->release)
 				skystar2->fe->ops->release(skystar2->fe);
@@ -2486,17 +2486,17 @@
 	if (ret < 0)
 		goto out;
 
-	ret = dvb_register_adapter(&dvb_adapter, skystar2_pci_driver.name,
+	adapter = pci_get_drvdata(pdev);
+	dvb_adapter = &adapter->dvb_adapter;
+
+	ret = dvb_register_adapter(dvb_adapter, skystar2_pci_driver.name,
 				   THIS_MODULE);
 	if (ret < 0) {
 		printk("%s: Error registering DVB adapter\n", __FUNCTION__);
 		goto err_halt;
 	}
 
-	adapter = pci_get_drvdata(pdev);
-
 	dvb_adapter->priv = adapter;
-	adapter->dvb_adapter = dvb_adapter;
 
 
 	init_MUTEX(&adapter->i2c_sem);
@@ -2541,7 +2541,7 @@
 	adapter->dmxdev.demux = dmx;
 	adapter->dmxdev.capabilities = 0;
 
-	ret = dvb_dmxdev_init(&adapter->dmxdev, adapter->dvb_adapter);
+	ret = dvb_dmxdev_init(&adapter->dmxdev, &adapter->dvb_adapter);
 	if (ret < 0)
 		goto err_dmx_release;
 
@@ -2559,7 +2559,7 @@
 	if (ret < 0)
 		goto err_remove_mem_frontend;
 
-	dvb_net_init(adapter->dvb_adapter, &adapter->dvbnet, &dvbdemux->dmx);
+	dvb_net_init(&adapter->dvb_adapter, &adapter->dvbnet, &dvbdemux->dmx);
 
 	frontend_init(adapter);
 out:
@@ -2576,7 +2576,7 @@
 err_i2c_del:
 	i2c_del_adapter(&adapter->i2c_adap);
 err_dvb_unregister:
-	dvb_unregister_adapter(adapter->dvb_adapter);
+	dvb_unregister_adapter(&adapter->dvb_adapter);
 err_halt:
 	driver_halt(pdev);
 	goto out;
@@ -2605,7 +2605,7 @@
 	if (adapter->fe != NULL)
 		dvb_unregister_frontend(adapter->fe);
 
-	dvb_unregister_adapter(adapter->dvb_adapter);
+	dvb_unregister_adapter(&adapter->dvb_adapter);
 
 			i2c_del_adapter(&adapter->i2c_adap);
 
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index e7d11e0..b12545f 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -11,9 +11,8 @@
 	  the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards and
 	  pcHDTV HD2000 cards.
 
-          Since these cards have no MPEG decoder onboard, they transmit
+	  Since these cards have no MPEG decoder onboard, they transmit
 	  only compressed MPEG data over the PCI bus, so you need
 	  an external software decoder to watch TV on your computer.
 
 	  Say Y if you own such a device and want to use it.
-
diff --git a/drivers/media/dvb/bt8xx/Makefile b/drivers/media/dvb/bt8xx/Makefile
index 9da8604..d188e4c 100644
--- a/drivers/media/dvb/bt8xx/Makefile
+++ b/drivers/media/dvb/bt8xx/Makefile
@@ -1,5 +1,3 @@
-
-obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o
+obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o
 
 EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/video -Idrivers/media/dvb/frontends
-
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index 213ff79..3c5a8e2 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -4,27 +4,27 @@
  * Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@t-online.de>
  *
  * large parts based on the bttv driver
- * Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
- *                        & Marcus Metzler (mocm@thp.uni-koeln.de)
+ * Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@metzlerbros.de)
+ *                        & Marcus Metzler (mocm@metzlerbros.de)
  * (c) 1999,2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
  * of the License, or (at your option) any later version.
- * 
+ *
 
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
 
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- * 
+ *
  */
 
 #include <linux/module.h>
@@ -58,7 +58,7 @@
 MODULE_PARM_DESC(verbose,
 		 "verbose startup messages, default is 1 (yes)");
 module_param_named(debug, bt878_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+MODULE_PARM_DESC(debug, "Turn on/off debugging, default is 0 (off).");
 
 int bt878_num;
 struct bt878 bt878[BT878_MAX];
@@ -128,21 +128,21 @@
 }
 
 /* RISC instructions */
-#define RISC_WRITE        	(0x01 << 28)
-#define RISC_JUMP         	(0x07 << 28)
-#define RISC_SYNC         	(0x08 << 28)
+#define RISC_WRITE		(0x01 << 28)
+#define RISC_JUMP		(0x07 << 28)
+#define RISC_SYNC		(0x08 << 28)
 
 /* RISC bits */
-#define RISC_WR_SOL       	(1 << 27)
-#define RISC_WR_EOL       	(1 << 26)
-#define RISC_IRQ          	(1 << 24)
+#define RISC_WR_SOL		(1 << 27)
+#define RISC_WR_EOL		(1 << 26)
+#define RISC_IRQ		(1 << 24)
 #define RISC_STATUS(status)	((((~status) & 0x0F) << 20) | ((status & 0x0F) << 16))
-#define RISC_SYNC_RESYNC  	(1 << 15)
-#define RISC_SYNC_FM1     	0x06
-#define RISC_SYNC_VRO     	0x0C
+#define RISC_SYNC_RESYNC	(1 << 15)
+#define RISC_SYNC_FM1		0x06
+#define RISC_SYNC_VRO		0x0C
 
 #define RISC_FLUSH()		bt->risc_pos = 0
-#define RISC_INSTR(instr) 	bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr)
+#define RISC_INSTR(instr)	bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr)
 
 static int bt878_make_risc(struct bt878 *bt)
 {
@@ -173,7 +173,7 @@
 	RISC_INSTR(RISC_SYNC | RISC_SYNC_FM1 | op_sync_orin);
 	RISC_INSTR(0);
 
-	dprintk("bt878: risc len lines %u, bytes per line %u\n", 
+	dprintk("bt878: risc len lines %u, bytes per line %u\n",
 			bt->line_count, bt->line_bytes);
 	for (line = 0; line < bt->line_count; line++) {
 		// At the beginning of every block we issue an IRQ with previous (finished) block number set
@@ -228,14 +228,14 @@
 	 * Hacked for DST to:
 	 * SCERR | OCERR | FDSR | FTRGT | FBUS | RISCI
 	 */
-	int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT | 
-		BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT | 
+	int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT |
+		BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT |
 		BT878_AFBUS | BT878_ARISCI;
 
 
 	/* ignore pesky bits */
 	int_mask &= ~irq_err_ignore;
-	
+
 	btwrite(int_mask, BT878_AINT_MASK);
 	btwrite(controlreg, BT878_AGPIO_DMA_CTL);
 }
@@ -461,9 +461,9 @@
 	pci_set_drvdata(dev, bt);
 
 /*        if(init_bt878(btv) < 0) {
-                bt878_remove(dev);
-                return -EIO;
-        }
+		bt878_remove(dev);
+		return -EIO;
+	}
 */
 
 	if ((result = bt878_mem_alloc(bt))) {
@@ -536,10 +536,10 @@
 MODULE_DEVICE_TABLE(pci, bt878_pci_tbl);
 
 static struct pci_driver bt878_pci_driver = {
-      .name 	= "bt878",
+      .name	= "bt878",
       .id_table = bt878_pci_tbl,
-      .probe 	= bt878_probe,
-      .remove 	= bt878_remove,
+      .probe	= bt878_probe,
+      .remove	= bt878_remove,
 };
 
 static int bt878_pci_driver_registered = 0;
@@ -558,7 +558,7 @@
 	       (BT878_VERSION_CODE >> 8) & 0xff,
 	       BT878_VERSION_CODE & 0xff);
 /*
-        bt878_check_chipset();
+	bt878_check_chipset();
 */
 	/* later we register inside of bt878_find_audio_dma()
 	 * because we may want to ignore certain cards */
diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/dvb/bt8xx/bt878.h
index e1b9809..837623f 100644
--- a/drivers/media/dvb/bt8xx/bt878.h
+++ b/drivers/media/dvb/bt8xx/bt878.h
@@ -1,4 +1,4 @@
-/* 
+/*
     bt878.h - Bt878 audio module (register offsets)
 
     Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@t-online.de>
@@ -120,14 +120,14 @@
 	u32 risc_pos;
 
 	struct tasklet_struct tasklet;
-	int shutdown;	
+	int shutdown;
 };
 
 extern struct bt878 bt878[BT878_MAX];
 
 void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
 		u32 irq_err_ignore);
-void bt878_stop(struct bt878 *bt);	     
+void bt878_stop(struct bt878 *bt);
 
 #if defined(__powerpc__)	/* big-endian */
 extern __inline__ void io_st_le32(volatile unsigned __iomem *addr, unsigned val)
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index eac8376..d047e34 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1,25 +1,25 @@
 /*
-    Frontend-driver for TwinHan DST Frontend
 
-    Copyright (C) 2003 Jamie Honan
+	Frontend/Card driver for TwinHan DST Frontend
+	Copyright (C) 2003 Jamie Honan
+	Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
 
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
 
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
 
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -31,59 +31,22 @@
 
 #include "dvb_frontend.h"
 #include "dst_priv.h"
-#include "dst.h"
+#include "dst_common.h"
 
-struct dst_state {
 
-	struct i2c_adapter* i2c;
+static unsigned int verbose = 1;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
 
-	struct bt878* bt;
+static unsigned int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug messages, default is 0 (yes)");
 
-	struct dvb_frontend_ops ops;
+static unsigned int dst_addons;
+module_param(dst_addons, int, 0644);
+MODULE_PARM_DESC(dst_addons, "CA daughterboard, default is 0 (No addons)");
 
-	/* configuration settings */
-	const struct dst_config* config;
-
-	struct dvb_frontend frontend;
-
-	/* private demodulator data */
-	u8 tx_tuna[10];
-	u8 rx_tuna[10];
-	u8 rxbuffer[10];
-	u8 diseq_flags;
-	u8 dst_type;
-	u32 type_flags;
-	u32 frequency;		/* intermediate frequency in kHz for QPSK */
-	fe_spectral_inversion_t inversion;
-	u32 symbol_rate;	/* symbol rate in Symbols per second */
-	fe_code_rate_t fec;
-	fe_sec_voltage_t voltage;
-	fe_sec_tone_mode_t tone;
-	u32 decode_freq;
-	u8 decode_lock;
-	u16 decode_strength;
-	u16 decode_snr;
-	unsigned long cur_jiff;
-	u8 k22;
-	fe_bandwidth_t bandwidth;
-};
-
-static unsigned int dst_verbose = 0;
-module_param(dst_verbose, int, 0644);
-MODULE_PARM_DESC(dst_verbose, "verbose startup messages, default is 1 (yes)");
-static unsigned int dst_debug = 0;
-module_param(dst_debug, int, 0644);
-MODULE_PARM_DESC(dst_debug, "debug messages, default is 0 (no)");
-
-#define dprintk	if (dst_debug) printk
-
-#define DST_TYPE_IS_SAT		0
-#define DST_TYPE_IS_TERR	1
-#define DST_TYPE_IS_CABLE	2
-
-#define DST_TYPE_HAS_NEWTUNE	1
-#define DST_TYPE_HAS_TS204	2
-#define DST_TYPE_HAS_SYMDIV	4
+#define dprintk	if (debug) printk
 
 #define HAS_LOCK	1
 #define ATTEMPT_TUNE	2
@@ -97,7 +60,7 @@
 	bt878_device_control(state->bt, DST_IG_TS, &bits);
 }
 
-static int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhigh)
+int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhigh, int delay)
 {
 	union dst_gpio_packet enb;
 	union dst_gpio_packet bits;
@@ -105,26 +68,33 @@
 
 	enb.enb.mask = mask;
 	enb.enb.enable = enbb;
+	if (verbose > 4)
+		dprintk("%s: mask=[%04x], enbb=[%04x], outhigh=[%04x]\n", __FUNCTION__, mask, enbb, outhigh);
+
 	if ((err = bt878_device_control(state->bt, DST_IG_ENABLE, &enb)) < 0) {
-		dprintk("%s: dst_gpio_enb error (err == %i, mask == 0x%02x, enb == 0x%02x)\n", __FUNCTION__, err, mask, enbb);
+		dprintk("%s: dst_gpio_enb error (err == %i, mask == %02x, enb == %02x)\n", __FUNCTION__, err, mask, enbb);
 		return -EREMOTEIO;
 	}
-
+	udelay(1000);
 	/* because complete disabling means no output, no need to do output packet */
 	if (enbb == 0)
 		return 0;
 
+	if (delay)
+		msleep(10);
+
 	bits.outp.mask = enbb;
 	bits.outp.highvals = outhigh;
 
 	if ((err = bt878_device_control(state->bt, DST_IG_WRITE, &bits)) < 0) {
-		dprintk("%s: dst_gpio_outb error (err == %i, enbb == 0x%02x, outhigh == 0x%02x)\n", __FUNCTION__, err, enbb, outhigh);
+		dprintk("%s: dst_gpio_outb error (err == %i, enbb == %02x, outhigh == %02x)\n", __FUNCTION__, err, enbb, outhigh);
 		return -EREMOTEIO;
 	}
 	return 0;
 }
+EXPORT_SYMBOL(dst_gpio_outb);
 
-static int dst_gpio_inb(struct dst_state *state, u8 * result)
+int dst_gpio_inb(struct dst_state *state, u8 * result)
 {
 	union dst_gpio_packet rd_packet;
 	int err;
@@ -139,143 +109,225 @@
 	*result = (u8) rd_packet.rd.value;
 	return 0;
 }
+EXPORT_SYMBOL(dst_gpio_inb);
 
-#define DST_I2C_ENABLE	1
-#define DST_8820	2
-
-static int dst_reset8820(struct dst_state *state)
+int rdc_reset_state(struct dst_state *state)
 {
-	int retval;
-	/* pull 8820 gpio pin low, wait, high, wait, then low */
-	// dprintk ("%s: reset 8820\n", __FUNCTION__);
-	retval = dst_gpio_outb(state, DST_8820, DST_8820, 0);
-	if (retval < 0)
-		return retval;
+	if (verbose > 1)
+		dprintk("%s: Resetting state machine\n", __FUNCTION__);
+
+	if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, 0, NO_DELAY) < 0) {
+		dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+		return -1;
+	}
+
 	msleep(10);
-	retval = dst_gpio_outb(state, DST_8820, DST_8820, DST_8820);
-	if (retval < 0)
-		return retval;
-	/* wait for more feedback on what works here *
-	   msleep(10);
-	   retval = dst_gpio_outb(dst, DST_8820, DST_8820, 0);
-	   if (retval < 0)
-	   return retval;
-	 */
+
+	if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, RDC_8820_INT, NO_DELAY) < 0) {
+		dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+		msleep(10);
+		return -1;
+	}
+
 	return 0;
 }
+EXPORT_SYMBOL(rdc_reset_state);
 
-static int dst_i2c_enable(struct dst_state *state)
+int rdc_8820_reset(struct dst_state *state)
 {
-	int retval;
-	/* pull I2C enable gpio pin low, wait */
-	// dprintk ("%s: i2c enable\n", __FUNCTION__);
-	retval = dst_gpio_outb(state, ~0, DST_I2C_ENABLE, 0);
-	if (retval < 0)
-		return retval;
-	// dprintk ("%s: i2c enable delay\n", __FUNCTION__);
-	msleep(33);
+	if (verbose > 1)
+		dprintk("%s: Resetting DST\n", __FUNCTION__);
+
+	if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, 0, NO_DELAY) < 0) {
+		dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+		return -1;
+	}
+	udelay(1000);
+	if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, RDC_8820_RESET, DELAY) < 0) {
+		dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+		return -1;
+	}
+
 	return 0;
 }
+EXPORT_SYMBOL(rdc_8820_reset);
 
-static int dst_i2c_disable(struct dst_state *state)
+int dst_pio_enable(struct dst_state *state)
 {
-	int retval;
-	/* release I2C enable gpio pin, wait */
-	// dprintk ("%s: i2c disable\n", __FUNCTION__);
-	retval = dst_gpio_outb(state, ~0, 0, 0);
-	if (retval < 0)
-		return retval;
-	// dprintk ("%s: i2c disable delay\n", __FUNCTION__);
-	msleep(33);
+	if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_ENABLE, 0, NO_DELAY) < 0) {
+		dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+		return -1;
+	}
+	udelay(1000);
 	return 0;
 }
+EXPORT_SYMBOL(dst_pio_enable);
 
-static int dst_wait_dst_ready(struct dst_state *state)
+int dst_pio_disable(struct dst_state *state)
+{
+	if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_DISABLE, RDC_8820_PIO_0_DISABLE, NO_DELAY) < 0) {
+		dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__);
+		return -1;
+	}
+	if (state->type_flags & DST_TYPE_HAS_FW_1)
+		udelay(1000);
+
+	return 0;
+}
+EXPORT_SYMBOL(dst_pio_disable);
+
+int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode)
 {
 	u8 reply;
-	int retval;
 	int i;
+
 	for (i = 0; i < 200; i++) {
-		retval = dst_gpio_inb(state, &reply);
-		if (retval < 0)
-			return retval;
-		if ((reply & DST_I2C_ENABLE) == 0) {
-			dprintk("%s: dst wait ready after %d\n", __FUNCTION__, i);
+		if (dst_gpio_inb(state, &reply) < 0) {
+			dprintk("%s: dst_gpio_inb ERROR !\n", __FUNCTION__);
+			return -1;
+		}
+
+		if ((reply & RDC_8820_PIO_0_ENABLE) == 0) {
+			if (verbose > 4)
+				dprintk("%s: dst wait ready after %d\n", __FUNCTION__, i);
 			return 1;
 		}
 		msleep(10);
 	}
-	dprintk("%s: dst wait NOT ready after %d\n", __FUNCTION__, i);
+	if (verbose > 1)
+		dprintk("%s: dst wait NOT ready after %d\n", __FUNCTION__, i);
+
 	return 0;
 }
+EXPORT_SYMBOL(dst_wait_dst_ready);
 
-static int write_dst(struct dst_state *state, u8 * data, u8 len)
+int dst_error_recovery(struct dst_state *state)
+{
+	dprintk("%s: Trying to return from previous errors...\n", __FUNCTION__);
+	dst_pio_disable(state);
+	msleep(10);
+	dst_pio_enable(state);
+	msleep(10);
+
+	return 0;
+}
+EXPORT_SYMBOL(dst_error_recovery);
+
+int dst_error_bailout(struct dst_state *state)
+{
+	dprintk("%s: Trying to bailout from previous error...\n", __FUNCTION__);
+	rdc_8820_reset(state);
+	dst_pio_disable(state);
+	msleep(10);
+
+	return 0;
+}
+EXPORT_SYMBOL(dst_error_bailout);
+
+
+int dst_comm_init(struct dst_state* state)
+{
+	if (verbose > 1)
+		dprintk ("%s: Initializing DST..\n", __FUNCTION__);
+	if ((dst_pio_enable(state)) < 0) {
+		dprintk("%s: PIO Enable Failed.\n", __FUNCTION__);
+		return -1;
+	}
+	if ((rdc_reset_state(state)) < 0) {
+		dprintk("%s: RDC 8820 State RESET Failed.\n", __FUNCTION__);
+		return -1;
+	}
+	if (state->type_flags & DST_TYPE_HAS_FW_1)
+		msleep(100);
+	else
+		msleep(5);
+
+	return 0;
+}
+EXPORT_SYMBOL(dst_comm_init);
+
+
+int write_dst(struct dst_state *state, u8 *data, u8 len)
 {
 	struct i2c_msg msg = {
 		.addr = state->config->demod_address,.flags = 0,.buf = data,.len = len
 	};
+
 	int err;
 	int cnt;
-
-	if (dst_debug && dst_verbose) {
+	if (debug && (verbose > 4)) {
 		u8 i;
-		dprintk("%s writing", __FUNCTION__);
-		for (i = 0; i < len; i++) {
-			dprintk(" 0x%02x", data[i]);
+		if (verbose > 4) {
+			dprintk("%s writing", __FUNCTION__);
+			for (i = 0; i < len; i++)
+				dprintk(" %02x", data[i]);
+			dprintk("\n");
 		}
-		dprintk("\n");
 	}
-	msleep(30);
-	for (cnt = 0; cnt < 4; cnt++) {
+	for (cnt = 0; cnt < 2; cnt++) {
 		if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) {
-			dprintk("%s: write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)\n", __FUNCTION__, err, len, data[0]);
-			dst_i2c_disable(state);
-			msleep(500);
-			dst_i2c_enable(state);
-			msleep(500);
+			dprintk("%s: _write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)\n", __FUNCTION__, err, len, data[0]);
+			dst_error_recovery(state);
 			continue;
 		} else
 			break;
 	}
-	if (cnt >= 4)
-		return -EREMOTEIO;
+
+	if (cnt >= 2) {
+		if (verbose > 1)
+			printk("%s: RDC 8820 RESET...\n", __FUNCTION__);
+		dst_error_bailout(state);
+
+		return -1;
+	}
+
 	return 0;
 }
+EXPORT_SYMBOL(write_dst);
 
-static int read_dst(struct dst_state *state, u8 * ret, u8 len)
+int read_dst(struct dst_state *state, u8 * ret, u8 len)
 {
 	struct i2c_msg msg = {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = ret,.len = len };
 	int err;
 	int cnt;
 
-	for (cnt = 0; cnt < 4; cnt++) {
+	for (cnt = 0; cnt < 2; cnt++) {
 		if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) {
+
 			dprintk("%s: read_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)\n", __FUNCTION__, err, len, ret[0]);
-			dst_i2c_disable(state);
-			dst_i2c_enable(state);
+			dst_error_recovery(state);
+
 			continue;
 		} else
 			break;
 	}
-	if (cnt >= 4)
-		return -EREMOTEIO;
-	dprintk("%s reply is 0x%x\n", __FUNCTION__, ret[0]);
-	if (dst_debug && dst_verbose) {
+	if (cnt >= 2) {
+		if (verbose > 1)
+			printk("%s: RDC 8820 RESET...\n", __FUNCTION__);
+		dst_error_bailout(state);
+
+		return -1;
+	}
+	if (debug && (verbose > 4)) {
+		dprintk("%s reply is 0x%x\n", __FUNCTION__, ret[0]);
 		for (err = 1; err < len; err++)
 			dprintk(" 0x%x", ret[err]);
 		if (err > 1)
 			dprintk("\n");
 	}
+
 	return 0;
 }
+EXPORT_SYMBOL(read_dst);
 
 static int dst_set_freq(struct dst_state *state, u32 freq)
 {
 	u8 *val;
 
 	state->frequency = freq;
+	if (debug > 4)
+		dprintk("%s: set Frequency %u\n", __FUNCTION__, freq);
 
-	// dprintk("%s: set frequency %u\n", __FUNCTION__, freq);
 	if (state->dst_type == DST_TYPE_IS_SAT) {
 		freq = freq / 1000;
 		if (freq < 950 || freq > 2150)
@@ -398,7 +450,8 @@
 	if (state->dst_type == DST_TYPE_IS_TERR) {
 		return 0;
 	}
-	// dprintk("%s: set srate %u\n", __FUNCTION__, srate);
+	if (debug > 4)
+		dprintk("%s: set symrate %u\n", __FUNCTION__, srate);
 	srate /= 1000;
 	val = &state->tx_tuna[0];
 
@@ -407,7 +460,10 @@
 		sval <<= 20;
 		do_div(sval, 88000);
 		symcalc = (u32) sval;
-		// dprintk("%s: set symcalc %u\n", __FUNCTION__, symcalc);
+
+		if (debug > 4)
+			dprintk("%s: set symcalc %u\n", __FUNCTION__, symcalc);
+
 		val[5] = (u8) (symcalc >> 12);
 		val[6] = (u8) (symcalc >> 4);
 		val[7] = (u8) (symcalc << 4);
@@ -422,7 +478,7 @@
 	return 0;
 }
 
-static u8 dst_check_sum(u8 * buf, u32 len)
+u8 dst_check_sum(u8 * buf, u32 len)
 {
 	u32 i;
 	u8 val = 0;
@@ -433,28 +489,7 @@
 	}
 	return ((~val) + 1);
 }
-
-struct dst_types {
-	char *mstr;
-	int offs;
-	u8 dst_type;
-	u32 type_flags;
-};
-
-static struct dst_types dst_tlist[] = {
-	{"DST-020", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_SYMDIV},
-	{"DST-030", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE},
-	{"DST-03T", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_TS204},
-	{"DST-MOT", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_SYMDIV},
-	{"DST-CI",  1, DST_TYPE_IS_SAT, DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE},
-	{"DSTMCI",  1, DST_TYPE_IS_SAT, DST_TYPE_HAS_NEWTUNE},
-	{"DSTFCI",  1, DST_TYPE_IS_SAT, DST_TYPE_HAS_NEWTUNE},
-	{"DCTNEW",  1, DST_TYPE_IS_CABLE, DST_TYPE_HAS_NEWTUNE},
-	{"DCT-CI",  1, DST_TYPE_IS_CABLE, DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_TS204},
-	{"DTTDIG",  1, DST_TYPE_IS_TERR, 0}
-};
-
-/* DCTNEW and DCT-CI are guesses */
+EXPORT_SYMBOL(dst_check_sum);
 
 static void dst_type_flags_print(u32 type_flags)
 {
@@ -465,93 +500,270 @@
 		printk(" 0x%x ts204", DST_TYPE_HAS_TS204);
 	if (type_flags & DST_TYPE_HAS_SYMDIV)
 		printk(" 0x%x symdiv", DST_TYPE_HAS_SYMDIV);
+	if (type_flags & DST_TYPE_HAS_FW_1)
+		printk(" 0x%x firmware version = 1", DST_TYPE_HAS_FW_1);
+	if (type_flags & DST_TYPE_HAS_FW_2)
+		printk(" 0x%x firmware version = 2", DST_TYPE_HAS_FW_2);
+	if (type_flags & DST_TYPE_HAS_FW_3)
+		printk(" 0x%x firmware version = 3", DST_TYPE_HAS_FW_3);
+//	if ((type_flags & DST_TYPE_HAS_FW_BUILD) && new_fw)
+
 	printk("\n");
 }
 
-static int dst_type_print(u8 type)
+
+static int dst_type_print (u8 type)
 {
 	char *otype;
 	switch (type) {
 	case DST_TYPE_IS_SAT:
 		otype = "satellite";
 		break;
+
 	case DST_TYPE_IS_TERR:
 		otype = "terrestrial";
 		break;
+
 	case DST_TYPE_IS_CABLE:
 		otype = "cable";
 		break;
+
 	default:
 		printk("%s: invalid dst type %d\n", __FUNCTION__, type);
 		return -EINVAL;
 	}
 	printk("DST type : %s\n", otype);
+
 	return 0;
 }
 
-static int dst_check_ci(struct dst_state *state)
+/*
+	Known cards list
+	Satellite
+	-------------------
+		  200103A
+	VP-1020   DST-MOT	LG(old), TS=188
+
+	VP-1020   DST-03T	LG(new), TS=204
+	VP-1022   DST-03T	LG(new), TS=204
+	VP-1025   DST-03T	LG(new), TS=204
+
+	VP-1030   DSTMCI,	LG(new), TS=188
+	VP-1032   DSTMCI,	LG(new), TS=188
+
+	Cable
+	-------------------
+	VP-2030   DCT-CI,	Samsung, TS=204
+	VP-2021   DCT-CI,	Unknown, TS=204
+	VP-2031   DCT-CI,	Philips, TS=188
+	VP-2040   DCT-CI,	Philips, TS=188, with CA daughter board
+	VP-2040   DCT-CI,	Philips, TS=204, without CA daughter board
+
+	Terrestrial
+	-------------------
+	VP-3050  DTTNXT			 TS=188
+	VP-3040  DTT-CI,	Philips, TS=188
+	VP-3040  DTT-CI,	Philips, TS=204
+
+	ATSC
+	-------------------
+	VP-3220  ATSCDI,		 TS=188
+	VP-3250  ATSCAD,		 TS=188
+
+*/
+
+struct dst_types dst_tlist[] = {
+	{
+		.device_id = "200103A",
+		.offset = 0,
+		.dst_type =  DST_TYPE_IS_SAT,
+		.type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1,
+		.dst_feature = 0
+	},	/*	obsolete	*/
+
+	{
+		.device_id = "DST-020",
+		.offset = 0,
+		.dst_type =  DST_TYPE_IS_SAT,
+		.type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1,
+		.dst_feature = 0
+	},	/*	obsolete	*/
+
+	{
+		.device_id = "DST-030",
+		.offset =  0,
+		.dst_type = DST_TYPE_IS_SAT,
+		.type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1,
+		.dst_feature = 0
+	},	/*	obsolete	*/
+
+	{
+		.device_id = "DST-03T",
+		.offset = 0,
+		.dst_type = DST_TYPE_IS_SAT,
+		.type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2,
+		.dst_feature = DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 | DST_TYPE_HAS_DISEQC5
+							 | DST_TYPE_HAS_MAC | DST_TYPE_HAS_MOTO
+	 },
+
+	{
+		.device_id = "DST-MOT",
+		.offset =  0,
+		.dst_type = DST_TYPE_IS_SAT,
+		.type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1,
+		.dst_feature = 0
+	},	/*	obsolete	*/
+
+	{
+		.device_id = "DST-CI",
+		.offset = 1,
+		.dst_type = DST_TYPE_IS_SAT,
+		.type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1,
+		.dst_feature = DST_TYPE_HAS_CA
+	},	/*	An OEM board	*/
+
+	{
+		.device_id = "DSTMCI",
+		.offset = 1,
+		.dst_type = DST_TYPE_IS_SAT,
+		.type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD,
+		.dst_feature = DST_TYPE_HAS_CA | DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4
+							| DST_TYPE_HAS_MOTO | DST_TYPE_HAS_MAC
+	},
+
+	{
+		.device_id = "DSTFCI",
+		.offset = 1,
+		.dst_type = DST_TYPE_IS_SAT,
+		.type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1,
+		.dst_feature = 0
+	},	/* unknown to vendor	*/
+
+	{
+		.device_id = "DCT-CI",
+		.offset = 1,
+		.dst_type = DST_TYPE_IS_CABLE,
+		.type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1
+							| DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD,
+		.dst_feature = DST_TYPE_HAS_CA
+	},
+
+	{
+		.device_id = "DCTNEW",
+		.offset = 1,
+		.dst_type = DST_TYPE_IS_CABLE,
+		.type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_3,
+		.dst_feature = 0
+	},
+
+	{
+		.device_id = "DTT-CI",
+		.offset = 1,
+		.dst_type = DST_TYPE_IS_TERR,
+		.type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD,
+		.dst_feature = 0
+	},
+
+	{
+		.device_id = "DTTDIG",
+		.offset = 1,
+		.dst_type = DST_TYPE_IS_TERR,
+		.type_flags = DST_TYPE_HAS_FW_2,
+		.dst_feature = 0
+	},
+
+	{
+		.device_id = "DTTNXT",
+		.offset = 1,
+		.dst_type = DST_TYPE_IS_TERR,
+		.type_flags = DST_TYPE_HAS_FW_2,
+		.dst_feature = DST_TYPE_HAS_ANALOG
+	},
+
+	{
+		.device_id = "ATSCDI",
+		.offset = 1,
+		.dst_type = DST_TYPE_IS_ATSC,
+		.type_flags = DST_TYPE_HAS_FW_2,
+		.dst_feature = 0
+	},
+
+	{
+		.device_id = "ATSCAD",
+		.offset = 1,
+		.dst_type = DST_TYPE_IS_ATSC,
+		.type_flags = DST_TYPE_HAS_FW_2,
+		.dst_feature = 0
+	},
+
+	{ }
+
+};
+
+
+static int dst_get_device_id(struct dst_state *state)
 {
-	u8 txbuf[8];
-	u8 rxbuf[8];
-	int retval;
+	u8 reply;
+
 	int i;
-	struct dst_types *dsp;
-	u8 use_dst_type;
-	u32 use_type_flags;
+	struct dst_types *p_dst_type;
+	u8 use_dst_type = 0;
+	u32 use_type_flags = 0;
 
-	memset(txbuf, 0, sizeof(txbuf));
-	txbuf[1] = 6;
-	txbuf[7] = dst_check_sum(txbuf, 7);
+	static u8 device_type[8] = {0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff};
 
-	dst_i2c_enable(state);
-	dst_reset8820(state);
-	retval = write_dst(state, txbuf, 8);
-	if (retval < 0) {
-		dst_i2c_disable(state);
-		dprintk("%s: write not successful, maybe no card?\n", __FUNCTION__);
-		return retval;
+	device_type[7] = dst_check_sum(device_type, 7);
+
+	if (write_dst(state, device_type, FIXED_COMM))
+		return -1;		/*	Write failed		*/
+
+	if ((dst_pio_disable(state)) < 0)
+		return -1;
+
+	if (read_dst(state, &reply, GET_ACK))
+		return -1;		/*	Read failure		*/
+
+	if (reply != ACK) {
+		dprintk("%s: Write not Acknowledged! [Reply=0x%02x]\n", __FUNCTION__, reply);
+		return -1;		/*	Unack'd write		*/
 	}
-	msleep(3);
-	retval = read_dst(state, rxbuf, 1);
-	dst_i2c_disable(state);
-	if (retval < 0) {
-		dprintk("%s: read not successful, maybe no card?\n", __FUNCTION__);
-		return retval;
+
+	if (!dst_wait_dst_ready(state, DEVICE_INIT))
+		return -1;		/*	DST not ready yet	*/
+
+	if (read_dst(state, state->rxbuffer, FIXED_COMM))
+		return -1;
+
+	dst_pio_disable(state);
+
+	if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) {
+		dprintk("%s: Checksum failure! \n", __FUNCTION__);
+		return -1;		/*	Checksum failure	*/
 	}
-	if (rxbuf[0] != 0xff) {
-		dprintk("%s: write reply not 0xff, not ci (%02x)\n", __FUNCTION__, rxbuf[0]);
-		return retval;
-	}
-	if (!dst_wait_dst_ready(state))
-		return 0;
-	// dst_i2c_enable(i2c); Dimitri
-	retval = read_dst(state, rxbuf, 8);
-	dst_i2c_disable(state);
-	if (retval < 0) {
-		dprintk("%s: read not successful\n", __FUNCTION__);
-		return retval;
-	}
-	if (rxbuf[7] != dst_check_sum(rxbuf, 7)) {
-		dprintk("%s: checksum failure\n", __FUNCTION__);
-		return retval;
-	}
-	rxbuf[7] = '\0';
-	for (i = 0, dsp = &dst_tlist[0]; i < sizeof(dst_tlist) / sizeof(dst_tlist[0]); i++, dsp++) {
-		if (!strncmp(&rxbuf[dsp->offs], dsp->mstr, strlen(dsp->mstr))) {
-			use_type_flags = dsp->type_flags;
-			use_dst_type = dsp->dst_type;
-			printk("%s: recognize %s\n", __FUNCTION__, dsp->mstr);
+
+	state->rxbuffer[7] = '\0';
+
+	for (i = 0, p_dst_type = dst_tlist; i < ARRAY_SIZE (dst_tlist); i++, p_dst_type++) {
+		if (!strncmp (&state->rxbuffer[p_dst_type->offset], p_dst_type->device_id, strlen (p_dst_type->device_id))) {
+			use_type_flags = p_dst_type->type_flags;
+			use_dst_type = p_dst_type->dst_type;
+
+			/*	Card capabilities	*/
+			state->dst_hw_cap = p_dst_type->dst_feature;
+			printk ("%s: Recognise [%s]\n", __FUNCTION__, p_dst_type->device_id);
+
 			break;
 		}
 	}
-	if (i >= sizeof(dst_tlist) / sizeof(dst_tlist[0])) {
-		printk("%s: unable to recognize %s or %s\n", __FUNCTION__, &rxbuf[0], &rxbuf[1]);
-		printk("%s please email linux-dvb@linuxtv.org with this type in\n", __FUNCTION__);
+
+	if (i >= sizeof (dst_tlist) / sizeof (dst_tlist [0])) {
+		printk("%s: Unable to recognize %s or %s\n", __FUNCTION__, &state->rxbuffer[0], &state->rxbuffer[1]);
+		printk("%s: please email linux-dvb@linuxtv.org with this type in\n", __FUNCTION__);
 		use_dst_type = DST_TYPE_IS_SAT;
 		use_type_flags = DST_TYPE_HAS_SYMDIV;
 	}
-	dst_type_print(use_dst_type);
 
+	dst_type_print(use_dst_type);
 	state->type_flags = use_type_flags;
 	state->dst_type = use_dst_type;
 	dst_type_flags_print(state->type_flags);
@@ -559,50 +771,102 @@
 	if (state->type_flags & DST_TYPE_HAS_TS204) {
 		dst_packsize(state, 204);
 	}
+
 	return 0;
 }
 
-static int dst_command(struct dst_state* state, u8 * data, u8 len)
+static int dst_probe(struct dst_state *state)
 {
-	int retval;
-	u8 reply;
+	if ((rdc_8820_reset(state)) < 0) {
+		dprintk("%s: RDC 8820 RESET Failed.\n", __FUNCTION__);
+		return -1;
+	}
+	if (dst_addons & DST_TYPE_HAS_CA)
+		msleep(4000);
+	else
+		msleep(100);
 
-	dst_i2c_enable(state);
-	dst_reset8820(state);
-	retval = write_dst(state, data, len);
-	if (retval < 0) {
-		dst_i2c_disable(state);
-		dprintk("%s: write not successful\n", __FUNCTION__);
-		return retval;
+	if ((dst_comm_init(state)) < 0) {
+		dprintk("%s: DST Initialization Failed.\n", __FUNCTION__);
+		return -1;
 	}
-	msleep(33);
-	retval = read_dst(state, &reply, 1);
-	dst_i2c_disable(state);
-	if (retval < 0) {
-		dprintk("%s: read verify  not successful\n", __FUNCTION__);
-		return retval;
+	msleep(100);
+	if (dst_get_device_id(state) < 0) {
+		dprintk("%s: unknown device.\n", __FUNCTION__);
+		return -1;
 	}
-	if (reply != 0xff) {
-		dprintk("%s: write reply not 0xff 0x%02x \n", __FUNCTION__, reply);
-		return 0;
+
+	return 0;
+}
+
+int dst_command(struct dst_state* state, u8 * data, u8 len)
+{
+	u8 reply;
+	if ((dst_comm_init(state)) < 0) {
+		dprintk("%s: DST Communication Initialization Failed.\n", __FUNCTION__);
+		return -1;
+	}
+
+	if (write_dst(state, data, len)) {
+		if (verbose > 1)
+			dprintk("%s: Tring to recover.. \n", __FUNCTION__);
+		if ((dst_error_recovery(state)) < 0) {
+			dprintk("%s: Recovery Failed.\n", __FUNCTION__);
+			return -1;
+		}
+		return -1;
+	}
+	if ((dst_pio_disable(state)) < 0) {
+		dprintk("%s: PIO Disable Failed.\n", __FUNCTION__);
+		return -1;
+	}
+	if (state->type_flags & DST_TYPE_HAS_FW_1)
+		udelay(3000);
+
+	if (read_dst(state, &reply, GET_ACK)) {
+		if (verbose > 1)
+			dprintk("%s: Trying to recover.. \n", __FUNCTION__);
+		if ((dst_error_recovery(state)) < 0) {
+			dprintk("%s: Recovery Failed.\n", __FUNCTION__);
+			return -1;
+		}
+		return -1;
+	}
+
+	if (reply != ACK) {
+		dprintk("%s: write not acknowledged 0x%02x \n", __FUNCTION__, reply);
+		return -1;
 	}
 	if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3))
 		return 0;
-	if (!dst_wait_dst_ready(state))
-		return 0;
-	// dst_i2c_enable(i2c); Per dimitri
-	retval = read_dst(state, state->rxbuffer, 8);
-	dst_i2c_disable(state);
-	if (retval < 0) {
-		dprintk("%s: read not successful\n", __FUNCTION__);
-		return 0;
+
+//	udelay(3000);
+	if (state->type_flags & DST_TYPE_HAS_FW_1)
+		udelay(3000);
+	else
+		udelay(2000);
+
+	if (!dst_wait_dst_ready(state, NO_DELAY))
+		return -1;
+
+	if (read_dst(state, state->rxbuffer, FIXED_COMM)) {
+		if (verbose > 1)
+			dprintk("%s: Trying to recover.. \n", __FUNCTION__);
+		if ((dst_error_recovery(state)) < 0) {
+			dprintk("%s: Recovery failed.\n", __FUNCTION__);
+			return -1;
+		}
+		return -1;
 	}
+
 	if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) {
 		dprintk("%s: checksum failure\n", __FUNCTION__);
-		return 0;
+		return -1;
 	}
+
 	return 0;
 }
+EXPORT_SYMBOL(dst_command);
 
 static int dst_get_signal(struct dst_state* state)
 {
@@ -646,11 +910,17 @@
 		paket[4] = 0;
 	else
 		paket[4] = 1;
+
 	if (state->tone == SEC_TONE_ON)
-		paket[2] = state->k22;
+		paket[2] = 0x02;
 	else
 		paket[2] = 0;
-	paket[7] = dst_check_sum(&paket[0], 7);
+	if (state->minicmd == SEC_MINI_A)
+		paket[3] = 0x02;
+	else
+		paket[3] = 0;
+
+	paket[7] = dst_check_sum (paket, 7);
 	dst_command(state, paket, 8);
 	return 0;
 }
@@ -658,21 +928,26 @@
 static int dst_get_tuna(struct dst_state* state)
 {
 	int retval;
+
 	if ((state->diseq_flags & ATTEMPT_TUNE) == 0)
 		return 0;
+
 	state->diseq_flags &= ~(HAS_LOCK);
-	if (!dst_wait_dst_ready(state))
+	if (!dst_wait_dst_ready(state, NO_DELAY))
 		return 0;
+
 	if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
 		/* how to get variable length reply ???? */
 		retval = read_dst(state, state->rx_tuna, 10);
 	} else {
-		retval = read_dst(state, &state->rx_tuna[2], 8);
+		retval = read_dst(state, &state->rx_tuna[2], FIXED_COMM);
 	}
+
 	if (retval < 0) {
 		dprintk("%s: read not successful\n", __FUNCTION__);
 		return 0;
 	}
+
 	if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
 		if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
 			dprintk("%s: checksum failure?\n", __FUNCTION__);
@@ -709,7 +984,9 @@
 	int retval;
 	u8 reply;
 
-	dprintk("%s: type_flags 0x%x \n", __FUNCTION__, state->type_flags);
+	if (debug > 4)
+		dprintk("%s: type_flags 0x%x \n", __FUNCTION__, state->type_flags);
+
 	state->decode_freq = 0;
 	state->decode_lock = state->decode_strength = state->decode_snr = 0;
 	if (state->dst_type == DST_TYPE_IS_SAT) {
@@ -717,32 +994,41 @@
 			dst_set_voltage(fe, SEC_VOLTAGE_13);
 	}
 	state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE);
-	dst_i2c_enable(state);
+
+	if ((dst_comm_init(state)) < 0) {
+		dprintk("%s: DST Communication initialization failed.\n", __FUNCTION__);
+		return -1;
+	}
+
 	if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
-		dst_reset8820(state);
 		state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9);
 		retval = write_dst(state, &state->tx_tuna[0], 10);
+
 	} else {
 		state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[2], 7);
-		retval = write_dst(state, &state->tx_tuna[2], 8);
+		retval = write_dst(state, &state->tx_tuna[2], FIXED_COMM);
 	}
 	if (retval < 0) {
-		dst_i2c_disable(state);
+		dst_pio_disable(state);
 		dprintk("%s: write not successful\n", __FUNCTION__);
 		return retval;
 	}
-	msleep(3);
-	retval = read_dst(state, &reply, 1);
-	dst_i2c_disable(state);
-	if (retval < 0) {
-		dprintk("%s: read verify  not successful\n", __FUNCTION__);
-		return retval;
+
+	if ((dst_pio_disable(state)) < 0) {
+		dprintk("%s: DST PIO disable failed !\n", __FUNCTION__);
+		return -1;
 	}
-	if (reply != 0xff) {
-		dprintk("%s: write reply not 0xff 0x%02x \n", __FUNCTION__, reply);
+
+	if ((read_dst(state, &reply, GET_ACK) < 0)) {
+		dprintk("%s: read verify not successful.\n", __FUNCTION__);
+		return -1;
+	}
+	if (reply != ACK) {
+		dprintk("%s: write not acknowledged 0x%02x \n", __FUNCTION__, reply);
 		return 0;
 	}
 	state->diseq_flags |= ATTEMPT_TUNE;
+
 	return dst_get_tuna(state);
 }
 
@@ -796,22 +1082,25 @@
 			need_cmd = 1;
 		state->diseq_flags |= HAS_POWER;
 		break;
+
 	case SEC_VOLTAGE_18:
 		if ((state->diseq_flags & HAS_POWER) == 0)
 			need_cmd = 1;
 		state->diseq_flags |= HAS_POWER;
 		val[8] |= 0x40;
 		break;
+
 	case SEC_VOLTAGE_OFF:
 		need_cmd = 1;
 		state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE);
 		break;
+
 	default:
 		return -EINVAL;
 	}
-	if (need_cmd) {
+	if (need_cmd)
 		dst_tone_power_cmd(state);
-	}
+
 	return 0;
 }
 
@@ -832,13 +1121,16 @@
 	switch (tone) {
 	case SEC_TONE_OFF:
 		break;
+
 	case SEC_TONE_ON:
 		val[8] |= 1;
 		break;
+
 	default:
 		return -EINVAL;
 	}
 	dst_tone_power_cmd(state);
+
 	return 0;
 }
 
@@ -913,10 +1205,16 @@
 	struct dst_state* state = (struct dst_state*) fe->demodulator_priv;
 
 	dst_set_freq(state, p->frequency);
+	if (verbose > 4)
+		dprintk("Set Frequency = [%d]\n", p->frequency);
+
 	dst_set_inversion(state, p->inversion);
 	if (state->dst_type == DST_TYPE_IS_SAT) {
 		dst_set_fec(state, p->u.qpsk.fec_inner);
 		dst_set_symbolrate(state, p->u.qpsk.symbol_rate);
+		if (verbose > 4)
+			dprintk("Set Symbolrate = [%d]\n", p->u.qpsk.symbol_rate);
+
 	} else if (state->dst_type == DST_TYPE_IS_TERR) {
 		dst_set_bandwidth(state, p->u.ofdm.bandwidth);
 	} else if (state->dst_type == DST_TYPE_IS_CABLE) {
@@ -958,50 +1256,47 @@
 static struct dvb_frontend_ops dst_dvbs_ops;
 static struct dvb_frontend_ops dst_dvbc_ops;
 
-struct dvb_frontend* dst_attach(const struct dst_config* config,
-				struct i2c_adapter* i2c,
-				struct bt878 *bt)
+struct dst_state* dst_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter)
 {
-	struct dst_state* state = NULL;
 
-	/* allocate memory for the internal state */
-	state = (struct dst_state*) kmalloc(sizeof(struct dst_state), GFP_KERNEL);
-	if (state == NULL) goto error;
+	/* check if the ASIC is there */
+	if (dst_probe(state) < 0) {
+		if (state)
+			kfree(state);
 
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->bt = bt;
-
-	/* check if the demod is there */
-	if (dst_check_ci(state) < 0) goto error;
-
+		return NULL;
+	}
 	/* determine settings based on type */
 	switch (state->dst_type) {
 	case DST_TYPE_IS_TERR:
 		memcpy(&state->ops, &dst_dvbt_ops, sizeof(struct dvb_frontend_ops));
 		break;
+
 	case DST_TYPE_IS_CABLE:
 		memcpy(&state->ops, &dst_dvbc_ops, sizeof(struct dvb_frontend_ops));
 		break;
+
 	case DST_TYPE_IS_SAT:
 		memcpy(&state->ops, &dst_dvbs_ops, sizeof(struct dvb_frontend_ops));
 		break;
+
 	default:
-		printk("dst: unknown frontend type. please report to the LinuxTV.org DVB mailinglist.\n");
-		goto error;
+		printk("%s: unknown DST type. please report to the LinuxTV.org DVB mailinglist.\n", __FUNCTION__);
+		if (state)
+			kfree(state);
+
+		return NULL;
 	}
 
 	/* create dvb_frontend */
 	state->frontend.ops = &state->ops;
 	state->frontend.demodulator_priv = state;
-	return &state->frontend;
 
-error:
-	kfree(state);
-	return NULL;
+	return state;				/*	Manu (DST is a card not a frontend)	*/
 }
 
+EXPORT_SYMBOL(dst_attach);
+
 static struct dvb_frontend_ops dst_dvbt_ops = {
 
 	.info = {
@@ -1051,6 +1346,7 @@
 	.read_signal_strength = dst_read_signal_strength,
 	.read_snr = dst_read_snr,
 
+	.diseqc_send_burst = dst_set_tone,
 	.diseqc_send_master_cmd = dst_set_diseqc,
 	.set_voltage = dst_set_voltage,
 	.set_tone = dst_set_tone,
@@ -1082,8 +1378,7 @@
 	.read_snr = dst_read_snr,
 };
 
-MODULE_DESCRIPTION("DST DVB-S/T/C Combo Frontend driver");
-MODULE_AUTHOR("Jamie Honan");
-MODULE_LICENSE("GPL");
 
-EXPORT_SYMBOL(dst_attach);
+MODULE_DESCRIPTION("DST DVB-S/T/C Combo Frontend driver");
+MODULE_AUTHOR("Jamie Honan, Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/bt8xx/dst.h b/drivers/media/dvb/bt8xx/dst.h
deleted file mode 100644
index bcb418c..0000000
--- a/drivers/media/dvb/bt8xx/dst.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-    Frontend-driver for TwinHan DST Frontend
-
-    Copyright (C) 2003 Jamie Honan
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef DST_H
-#define DST_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/device.h>
-#include "bt878.h"
-
-struct dst_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-};
-
-extern struct dvb_frontend* dst_attach(const struct dst_config* config,
-				       struct i2c_adapter* i2c,
-				       struct bt878 *bt);
-
-#endif // DST_H
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
new file mode 100644
index 0000000..d781504
--- /dev/null
+++ b/drivers/media/dvb/bt8xx/dst_ca.c
@@ -0,0 +1,861 @@
+/*
+	CA-driver for TwinHan DST Frontend/Card
+
+	Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <linux/dvb/ca.h>
+#include "dvbdev.h"
+#include "dvb_frontend.h"
+
+#include "dst_ca.h"
+#include "dst_common.h"
+
+static unsigned int verbose = 1;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+static unsigned int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug messages, default is 1 (yes)");
+
+#define dprintk if (debug) printk
+
+/*	Need some more work	*/
+static int ca_set_slot_descr(void)
+{
+	/*	We could make this more graceful ?	*/
+	return -EOPNOTSUPP;
+}
+
+/*	Need some more work	*/
+static int ca_set_pid(void)
+{
+	/*	We could make this more graceful ?	*/
+	return -EOPNOTSUPP;
+}
+
+
+static int put_checksum(u8 *check_string, int length)
+{
+	u8 i = 0, checksum = 0;
+
+	if (verbose > 3) {
+		dprintk("%s: ========================= Checksum calculation ===========================\n", __FUNCTION__);
+		dprintk("%s: String Length=[0x%02x]\n", __FUNCTION__, length);
+
+		dprintk("%s: String=[", __FUNCTION__);
+	}
+	while (i < length) {
+		if (verbose > 3)
+			dprintk(" %02x", check_string[i]);
+		checksum += check_string[i];
+		i++;
+	}
+	if (verbose > 3) {
+		dprintk(" ]\n");
+		dprintk("%s: Sum=[%02x]\n", __FUNCTION__, checksum);
+	}
+	check_string[length] = ~checksum + 1;
+	if (verbose > 3) {
+		dprintk("%s: Checksum=[%02x]\n", __FUNCTION__, check_string[length]);
+		dprintk("%s: ==========================================================================\n", __FUNCTION__);
+	}
+
+	return 0;
+}
+
+static int dst_ci_command(struct dst_state* state, u8 * data, u8 *ca_string, u8 len, int read)
+{
+	u8 reply;
+
+	dst_comm_init(state);
+	msleep(65);
+
+	if (write_dst(state, data, len)) {
+		dprintk("%s: Write not successful, trying to recover\n", __FUNCTION__);
+		dst_error_recovery(state);
+		return -1;
+	}
+
+	if ((dst_pio_disable(state)) < 0) {
+		dprintk("%s: DST PIO disable failed.\n", __FUNCTION__);
+		return -1;
+	}
+
+	if (read_dst(state, &reply, GET_ACK) < 0) {
+		dprintk("%s: Read not successful, trying to recover\n", __FUNCTION__);
+		dst_error_recovery(state);
+		return -1;
+	}
+
+	if (read) {
+		if (! dst_wait_dst_ready(state, LONG_DELAY)) {
+			dprintk("%s: 8820 not ready\n", __FUNCTION__);
+			return -1;
+		}
+
+		if (read_dst(state, ca_string, 128) < 0) {	/*	Try to make this dynamic	*/
+			dprintk("%s: Read not successful, trying to recover\n", __FUNCTION__);
+			dst_error_recovery(state);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+
+static int dst_put_ci(struct dst_state *state, u8 *data, int len, u8 *ca_string, int read)
+{
+	u8 dst_ca_comm_err = 0;
+
+	while (dst_ca_comm_err < RETRIES) {
+		dst_comm_init(state);
+		if (verbose > 2)
+			dprintk("%s: Put Command\n", __FUNCTION__);
+		if (dst_ci_command(state, data, ca_string, len, read)) {	// If error
+			dst_error_recovery(state);
+			dst_ca_comm_err++; // work required here.
+		}
+		break;
+	}
+
+	return 0;
+}
+
+
+
+static int ca_get_app_info(struct dst_state *state)
+{
+	static u8 command[8] = {0x07, 0x40, 0x01, 0x00, 0x01, 0x00, 0x00, 0xff};
+
+	put_checksum(&command[0], command[0]);
+	if ((dst_put_ci(state, command, sizeof(command), state->messages, GET_REPLY)) < 0) {
+		dprintk("%s: -->dst_put_ci FAILED !\n", __FUNCTION__);
+		return -1;
+	}
+	if (verbose > 1) {
+		dprintk("%s: -->dst_put_ci SUCCESS !\n", __FUNCTION__);
+
+		dprintk("%s: ================================ CI Module Application Info ======================================\n", __FUNCTION__);
+		dprintk("%s: Application Type=[%d], Application Vendor=[%d], Vendor Code=[%d]\n%s: Application info=[%s]\n",
+			__FUNCTION__, state->messages[7], (state->messages[8] << 8) | state->messages[9],
+			(state->messages[10] << 8) | state->messages[11], __FUNCTION__, (char *)(&state->messages[12]));
+		dprintk("%s: ==================================================================================================\n", __FUNCTION__);
+	}
+
+	return 0;
+}
+
+static int ca_get_slot_caps(struct dst_state *state, struct ca_caps *p_ca_caps, void *arg)
+{
+	int i;
+	u8 slot_cap[256];
+	static u8 slot_command[8] = {0x07, 0x40, 0x02, 0x00, 0x02, 0x00, 0x00, 0xff};
+
+	put_checksum(&slot_command[0], slot_command[0]);
+	if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_cap, GET_REPLY)) < 0) {
+		dprintk("%s: -->dst_put_ci FAILED !\n", __FUNCTION__);
+		return -1;
+	}
+	if (verbose > 1)
+		dprintk("%s: -->dst_put_ci SUCCESS !\n", __FUNCTION__);
+
+	/*	Will implement the rest soon		*/
+
+	if (verbose > 1) {
+		dprintk("%s: Slot cap = [%d]\n", __FUNCTION__, slot_cap[7]);
+		dprintk("===================================\n");
+		for (i = 0; i < 8; i++)
+			dprintk(" %d", slot_cap[i]);
+		dprintk("\n");
+	}
+
+	p_ca_caps->slot_num = 1;
+	p_ca_caps->slot_type = 1;
+	p_ca_caps->descr_num = slot_cap[7];
+	p_ca_caps->descr_type = 1;
+
+
+	if (copy_to_user((struct ca_caps *)arg, p_ca_caps, sizeof (struct ca_caps))) {
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+/*	Need some more work	*/
+static int ca_get_slot_descr(struct dst_state *state, struct ca_msg *p_ca_message, void *arg)
+{
+	return -EOPNOTSUPP;
+}
+
+
+static int ca_get_slot_info(struct dst_state *state, struct ca_slot_info *p_ca_slot_info, void *arg)
+{
+	int i;
+	static u8 slot_command[8] = {0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff};
+
+	u8 *slot_info = state->rxbuffer;
+
+	put_checksum(&slot_command[0], 7);
+	if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_info, GET_REPLY)) < 0) {
+		dprintk("%s: -->dst_put_ci FAILED !\n", __FUNCTION__);
+		return -1;
+	}
+	if (verbose > 1)
+		dprintk("%s: -->dst_put_ci SUCCESS !\n", __FUNCTION__);
+
+	/*	Will implement the rest soon		*/
+
+	if (verbose > 1) {
+		dprintk("%s: Slot info = [%d]\n", __FUNCTION__, slot_info[3]);
+		dprintk("===================================\n");
+		for (i = 0; i < 8; i++)
+			dprintk(" %d", slot_info[i]);
+		dprintk("\n");
+	}
+
+	if (slot_info[4] & 0x80) {
+		p_ca_slot_info->flags = CA_CI_MODULE_PRESENT;
+		p_ca_slot_info->num = 1;
+		p_ca_slot_info->type = CA_CI;
+	}
+	else if (slot_info[4] & 0x40) {
+		p_ca_slot_info->flags = CA_CI_MODULE_READY;
+		p_ca_slot_info->num = 1;
+		p_ca_slot_info->type = CA_CI;
+	}
+	else {
+		p_ca_slot_info->flags = 0;
+	}
+
+	if (copy_to_user((struct ca_slot_info *)arg, p_ca_slot_info, sizeof (struct ca_slot_info))) {
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+
+
+
+static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, void *arg)
+{
+	u8 i = 0;
+	u32 command = 0;
+
+	if (copy_from_user(p_ca_message, (void *)arg, sizeof (struct ca_msg)))
+		return -EFAULT;
+
+
+	if (p_ca_message->msg) {
+		if (verbose > 3)
+			dprintk("Message = [%02x %02x %02x]\n", p_ca_message->msg[0], p_ca_message->msg[1], p_ca_message->msg[2]);
+
+		for (i = 0; i < 3; i++) {
+			command = command | p_ca_message->msg[i];
+			if (i < 2)
+				command = command << 8;
+		}
+		if (verbose > 3)
+			dprintk("%s:Command=[0x%x]\n", __FUNCTION__, command);
+
+		switch (command) {
+			case CA_APP_INFO:
+				memcpy(p_ca_message->msg, state->messages, 128);
+				if (copy_to_user((void *)arg, p_ca_message, sizeof (struct ca_msg)) )
+					return -EFAULT;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int handle_en50221_tag(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer)
+{
+	if (state->dst_hw_cap & DST_TYPE_HAS_SESSION) {
+		hw_buffer->msg[2] = p_ca_message->msg[1];		/*		MSB			*/
+		hw_buffer->msg[3] = p_ca_message->msg[2];		/*		LSB			*/
+	}
+	else {
+		hw_buffer->msg[2] = 0x03;
+		hw_buffer->msg[3] = 0x00;
+	}
+	return 0;
+}
+
+static int debug_8820_buffer(struct ca_msg *hw_buffer)
+{
+	unsigned int i;
+
+	dprintk("%s:Debug=[", __FUNCTION__);
+	for (i = 0; i < (hw_buffer->msg[0] + 1); i++)
+		dprintk(" %02x", hw_buffer->msg[i]);
+	dprintk("]\n");
+
+	return 0;
+}
+
+static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 reply)
+{
+	if ((dst_put_ci(state, hw_buffer->msg, (hw_buffer->length + 1), hw_buffer->msg, reply)) < 0) {
+		dprintk("%s: DST-CI Command failed.\n", __FUNCTION__);
+		dprintk("%s: Resetting DST.\n", __FUNCTION__);
+		rdc_reset_state(state);
+		return -1;
+	}
+	if (verbose > 2)
+		dprintk("%s: DST-CI Command succes.\n", __FUNCTION__);
+
+	return 0;
+}
+
+
+static int ca_set_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u8 reply, u8 query)
+{
+	u32 hw_offset, buf_offset, i, k;
+	u32 program_info_length = 0, es_info_length = 0, length = 0, words = 0;
+	u8 found_prog_ca_desc = 0, found_stream_ca_desc = 0, error_condition = 0, hw_buffer_length = 0;
+
+	if (verbose > 3)
+		dprintk("%s, p_ca_message length %d (0x%x)\n", __FUNCTION__,p_ca_message->length,p_ca_message->length );
+
+	handle_en50221_tag(state, p_ca_message, hw_buffer);			/*	EN50221 tag		*/
+
+	/*	Handle the length field (variable)	*/
+	if (!(p_ca_message->msg[3] & 0x80)) {				/*	Length = 1		*/
+		length = p_ca_message->msg[3] & 0x7f;
+		words = 0;						/*	domi's suggestion	*/
+	}
+	else {								/*	Length = words		*/
+		words = p_ca_message->msg[3] & 0x7f;
+		for (i = 0; i < words; i++) {
+			length = length << 8;
+			length = length | p_ca_message->msg[4 + i];
+		}
+	}
+	if (verbose > 4) {
+		dprintk("%s:Length=[%d (0x%x)], Words=[%d]\n", __FUNCTION__, length,length, words);
+
+		/*	Debug Input string		*/
+		for (i = 0; i < length; i++)
+			dprintk(" %02x", p_ca_message->msg[i]);
+		dprintk("]\n");
+	}
+
+	hw_offset = 7;
+	buf_offset = words + 4;
+
+	/*		Program Header			*/
+	if (verbose > 4)
+		dprintk("\n%s:Program Header=[", __FUNCTION__);
+	for (i = 0; i < 6; i++) {
+		hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset];
+		if (verbose > 4)
+			dprintk(" %02x", p_ca_message->msg[buf_offset]);
+		hw_offset++, buf_offset++, hw_buffer_length++;
+	}
+	if (verbose > 4)
+		dprintk("]\n");
+
+	program_info_length = 0;
+	program_info_length = (((program_info_length | p_ca_message->msg[words + 8]) & 0x0f) << 8) | p_ca_message->msg[words + 9];
+	if (verbose > 4)
+		dprintk("%s:Program info Length=[%d][%02x], hw_offset=[%d], buf_offset=[%d] \n",
+			__FUNCTION__, program_info_length, program_info_length, hw_offset, buf_offset);
+
+	if (program_info_length && (program_info_length < 256)) {	/*	If program_info_length		*/
+		hw_buffer->msg[11] = hw_buffer->msg[11] & 0x0f;		/*	req only 4 bits			*/
+		hw_buffer->msg[12] = hw_buffer->msg[12] + 1;		/*	increment! ASIC bug!		*/
+
+		if (p_ca_message->msg[buf_offset + 1] == 0x09) {	/*	Check CA descriptor		*/
+			found_prog_ca_desc = 1;
+			if (verbose > 4)
+				dprintk("%s: Found CA descriptor @ Program level\n", __FUNCTION__);
+		}
+
+		if (found_prog_ca_desc) {				/*	Command only if CA descriptor	*/
+			hw_buffer->msg[13] = p_ca_message->msg[buf_offset];	/*	CA PMT command ID	*/
+			hw_offset++, buf_offset++, hw_buffer_length++;
+		}
+
+		/*			Program descriptors				*/
+		if (verbose > 4) {
+			dprintk("%s:**********>buf_offset=[%d], hw_offset=[%d]\n", __FUNCTION__, buf_offset, hw_offset);
+			dprintk("%s:Program descriptors=[", __FUNCTION__);
+		}
+		while (program_info_length && !error_condition) {		/*	Copy prog descriptors	*/
+			if (program_info_length > p_ca_message->length) {	/*	Error situation		*/
+				dprintk ("%s:\"WARNING\" Length error, line=[%d], prog_info_length=[%d]\n",
+								__FUNCTION__, __LINE__, program_info_length);
+				dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__);
+				error_condition = 1;
+				break;
+			}
+
+			hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset];
+			dprintk(" %02x", p_ca_message->msg[buf_offset]);
+			hw_offset++, buf_offset++, hw_buffer_length++, program_info_length--;
+		}
+		if (verbose > 4) {
+			dprintk("]\n");
+			dprintk("%s:**********>buf_offset=[%d], hw_offset=[%d]\n", __FUNCTION__, buf_offset, hw_offset);
+		}
+		if (found_prog_ca_desc) {
+			if (!reply) {
+				hw_buffer->msg[13] = 0x01;		/*	OK descrambling			*/
+				if (verbose > 1)
+					dprintk("CA PMT Command = OK Descrambling\n");
+			}
+			else {
+				hw_buffer->msg[13] = 0x02;		/*	Ok MMI				*/
+				if (verbose > 1)
+					dprintk("CA PMT Command = Ok MMI\n");
+			}
+			if (query) {
+				hw_buffer->msg[13] = 0x03;		/*	Query				*/
+				if (verbose > 1)
+					dprintk("CA PMT Command = CA PMT query\n");
+			}
+		}
+	}
+	else {
+		hw_buffer->msg[11] = hw_buffer->msg[11] & 0xf0;		/*	Don't write to ASIC		*/
+		hw_buffer->msg[12] = hw_buffer->msg[12] = 0x00;
+	}
+	if (verbose > 4)
+		dprintk("%s:**********>p_ca_message->length=[%d], buf_offset=[%d], hw_offset=[%d]\n",
+					__FUNCTION__, p_ca_message->length, buf_offset, hw_offset);
+
+	while ((buf_offset  < p_ca_message->length)  && !error_condition) {
+		/*	Bail out in case of an indefinite loop		*/
+		if ((es_info_length > p_ca_message->length) || (buf_offset > p_ca_message->length)) {
+			dprintk("%s:\"WARNING\" Length error, line=[%d], prog_info_length=[%d], buf_offset=[%d]\n",
+							__FUNCTION__, __LINE__, program_info_length, buf_offset);
+
+			dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__);
+			error_condition = 1;
+			break;
+		}
+
+		/*		Stream Header				*/
+
+		for (k = 0; k < 5; k++) {
+			hw_buffer->msg[hw_offset + k] = p_ca_message->msg[buf_offset + k];
+		}
+
+		es_info_length = 0;
+		es_info_length = (es_info_length | (p_ca_message->msg[buf_offset + 3] & 0x0f)) << 8 | p_ca_message->msg[buf_offset + 4];
+
+		if (verbose > 4) {
+			dprintk("\n%s:----->Stream header=[%02x %02x %02x %02x %02x]\n", __FUNCTION__,
+				p_ca_message->msg[buf_offset + 0], p_ca_message->msg[buf_offset + 1],
+				p_ca_message->msg[buf_offset + 2], p_ca_message->msg[buf_offset + 3],
+				p_ca_message->msg[buf_offset + 4]);
+
+			dprintk("%s:----->Stream type=[%02x], es length=[%d (0x%x)], Chars=[%02x] [%02x], buf_offset=[%d]\n", __FUNCTION__,
+				p_ca_message->msg[buf_offset + 0], es_info_length, es_info_length,
+				p_ca_message->msg[buf_offset + 3], p_ca_message->msg[buf_offset + 4], buf_offset);
+		}
+
+		hw_buffer->msg[hw_offset + 3] &= 0x0f;			/*	req only 4 bits			*/
+
+		if (found_prog_ca_desc) {
+			hw_buffer->msg[hw_offset + 3] = 0x00;
+			hw_buffer->msg[hw_offset + 4] = 0x00;
+		}
+
+		hw_offset += 5, buf_offset += 5, hw_buffer_length += 5;
+
+		/*		Check for CA descriptor			*/
+		if (p_ca_message->msg[buf_offset + 1] == 0x09) {
+			if (verbose > 4)
+				dprintk("%s:Found CA descriptor @ Stream level\n", __FUNCTION__);
+			found_stream_ca_desc = 1;
+		}
+
+		/*		ES descriptors				*/
+
+		if (es_info_length && !error_condition && !found_prog_ca_desc && found_stream_ca_desc) {
+//			if (!ca_pmt_done) {
+				hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset];	/*	CA PMT cmd(es)	*/
+				if (verbose > 4)
+					printk("%s:----->CA PMT Command ID=[%02x]\n", __FUNCTION__, p_ca_message->msg[buf_offset]);
+//				hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--, ca_pmt_done = 1;
+				hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--;
+//			}
+			if (verbose > 4)
+				dprintk("%s:----->ES descriptors=[", __FUNCTION__);
+
+			while (es_info_length && !error_condition) {	/*	ES descriptors			*/
+				if ((es_info_length > p_ca_message->length) || (buf_offset > p_ca_message->length)) {
+					if (verbose > 4) {
+						dprintk("%s:\"WARNING\" ES Length error, line=[%d], es_info_length=[%d], buf_offset=[%d]\n",
+										__FUNCTION__, __LINE__, es_info_length, buf_offset);
+
+						dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__);
+					}
+					error_condition = 1;
+					break;
+				}
+
+				hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset];
+				if (verbose > 3)
+					dprintk("%02x ", hw_buffer->msg[hw_offset]);
+				hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--;
+			}
+			found_stream_ca_desc = 0;			/*	unset for new streams		*/
+			dprintk("]\n");
+		}
+	}
+
+	/*		MCU Magic words					*/
+
+	hw_buffer_length += 7;
+	hw_buffer->msg[0] = hw_buffer_length;
+	hw_buffer->msg[1] = 64;
+	hw_buffer->msg[4] = 3;
+	hw_buffer->msg[5] = hw_buffer->msg[0] - 7;
+	hw_buffer->msg[6] = 0;
+
+
+	/*      Fix length      */
+	hw_buffer->length = hw_buffer->msg[0];
+
+	put_checksum(&hw_buffer->msg[0], hw_buffer->msg[0]);
+	/*      Do the actual write     */
+	if (verbose > 4) {
+		dprintk("%s:======================DEBUGGING================================\n", __FUNCTION__);
+		dprintk("%s: Actual Length=[%d]\n", __FUNCTION__, hw_buffer_length);
+	}
+	/*      Only for debugging!     */
+	if (verbose > 2)
+		debug_8820_buffer(hw_buffer);
+	if (verbose > 3)
+		dprintk("%s: Reply = [%d]\n", __FUNCTION__, reply);
+	write_to_8820(state, hw_buffer, reply);
+
+	return 0;
+}
+
+/*	Board supports CA PMT reply ?		*/
+static int dst_check_ca_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer)
+{
+	int ca_pmt_reply_test = 0;
+
+	/*	Do test board			*/
+	/*	Not there yet but soon		*/
+
+
+	/*	CA PMT Reply capable		*/
+	if (ca_pmt_reply_test) {
+		if ((ca_set_pmt(state, p_ca_message, hw_buffer, 1, GET_REPLY)) < 0) {
+			dprintk("%s: ca_set_pmt.. failed !\n", __FUNCTION__);
+			return -1;
+		}
+
+	/*	Process CA PMT Reply		*/
+	/*	will implement soon		*/
+		dprintk("%s: Not there yet\n", __FUNCTION__);
+	}
+	/*	CA PMT Reply not capable	*/
+	if (!ca_pmt_reply_test) {
+		if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, NO_REPLY)) < 0) {
+			dprintk("%s: ca_set_pmt.. failed !\n", __FUNCTION__);
+			return -1;
+		}
+		if (verbose > 3)
+			dprintk("%s: ca_set_pmt.. success !\n", __FUNCTION__);
+	/*	put a dummy message		*/
+
+	}
+	return 0;
+}
+
+static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, void *arg)
+{
+	int i = 0;
+	unsigned int ca_message_header_len;
+
+	u32 command = 0;
+	struct ca_msg *hw_buffer;
+
+	if ((hw_buffer = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) {
+		printk("%s: Memory allocation failure\n", __FUNCTION__);
+		return -ENOMEM;
+	}
+	if (verbose > 3)
+		dprintk("%s\n", __FUNCTION__);
+
+	if (copy_from_user(p_ca_message, (void *)arg, sizeof (struct ca_msg)))
+		return -EFAULT;
+
+	if (p_ca_message->msg) {
+		ca_message_header_len = p_ca_message->length;	/*	Restore it back when you are done	*/
+		/*	EN50221 tag	*/
+		command = 0;
+
+		for (i = 0; i < 3; i++) {
+			command = command | p_ca_message->msg[i];
+			if (i < 2)
+				command = command << 8;
+		}
+		if (verbose > 3)
+			dprintk("%s:Command=[0x%x]\n", __FUNCTION__, command);
+
+		switch (command) {
+			case CA_PMT:
+				if (verbose > 3)
+					dprintk("Command = SEND_CA_PMT\n");
+				if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, 0)) < 0) {
+					dprintk("%s: -->CA_PMT Failed !\n", __FUNCTION__);
+					return -1;
+				}
+				if (verbose > 3)
+					dprintk("%s: -->CA_PMT Success !\n", __FUNCTION__);
+//				retval = dummy_set_pmt(state, p_ca_message, hw_buffer, 0, 0);
+
+				break;
+
+			case CA_PMT_REPLY:
+				if (verbose > 3)
+					dprintk("Command = CA_PMT_REPLY\n");
+				/*      Have to handle the 2 basic types of cards here  */
+				if ((dst_check_ca_pmt(state, p_ca_message, hw_buffer)) < 0) {
+					dprintk("%s: -->CA_PMT_REPLY Failed !\n", __FUNCTION__);
+					return -1;
+				}
+				if (verbose > 3)
+					dprintk("%s: -->CA_PMT_REPLY Success !\n", __FUNCTION__);
+
+				/*      Certain boards do behave different ?            */
+//				retval = ca_set_pmt(state, p_ca_message, hw_buffer, 1, 1);
+
+			case CA_APP_INFO_ENQUIRY:		// only for debugging
+				if (verbose > 3)
+					dprintk("%s: Getting Cam Application information\n", __FUNCTION__);
+
+				if ((ca_get_app_info(state)) < 0) {
+					dprintk("%s: -->CA_APP_INFO_ENQUIRY Failed !\n", __FUNCTION__);
+					return -1;
+				}
+				if (verbose > 3)
+					printk("%s: -->CA_APP_INFO_ENQUIRY Success !\n", __FUNCTION__);
+
+				break;
+		}
+	}
+	return 0;
+}
+
+static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg)
+{
+	struct dvb_device* dvbdev = (struct dvb_device*) file->private_data;
+	struct dst_state* state = (struct dst_state*) dvbdev->priv;
+	struct ca_slot_info *p_ca_slot_info;
+	struct ca_caps *p_ca_caps;
+	struct ca_msg *p_ca_message;
+
+	if ((p_ca_message = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) {
+		printk("%s: Memory allocation failure\n", __FUNCTION__);
+		return -ENOMEM;
+	}
+
+	if ((p_ca_slot_info = (struct ca_slot_info *) kmalloc(sizeof (struct ca_slot_info), GFP_KERNEL)) == NULL) {
+		printk("%s: Memory allocation failure\n", __FUNCTION__);
+		return -ENOMEM;
+	}
+
+	if ((p_ca_caps = (struct ca_caps *) kmalloc(sizeof (struct ca_caps), GFP_KERNEL)) == NULL) {
+		printk("%s: Memory allocation failure\n", __FUNCTION__);
+		return -ENOMEM;
+	}
+
+	/*	We have now only the standard ioctl's, the driver is upposed to handle internals.	*/
+	switch (cmd) {
+		case CA_SEND_MSG:
+			if (verbose > 1)
+				dprintk("%s: Sending message\n", __FUNCTION__);
+			if ((ca_send_message(state, p_ca_message, arg)) < 0) {
+				dprintk("%s: -->CA_SEND_MSG Failed !\n", __FUNCTION__);
+				return -1;
+			}
+
+			break;
+
+		case CA_GET_MSG:
+			if (verbose > 1)
+				dprintk("%s: Getting message\n", __FUNCTION__);
+			if ((ca_get_message(state, p_ca_message, arg)) < 0) {
+				dprintk("%s: -->CA_GET_MSG Failed !\n", __FUNCTION__);
+				return -1;
+			}
+			if (verbose > 1)
+				dprintk("%s: -->CA_GET_MSG Success !\n", __FUNCTION__);
+
+			break;
+
+		case CA_RESET:
+			if (verbose > 1)
+				dprintk("%s: Resetting DST\n", __FUNCTION__);
+			dst_error_bailout(state);
+			msleep(4000);
+
+			break;
+
+		case CA_GET_SLOT_INFO:
+			if (verbose > 1)
+				dprintk("%s: Getting Slot info\n", __FUNCTION__);
+			if ((ca_get_slot_info(state, p_ca_slot_info, arg)) < 0) {
+				dprintk("%s: -->CA_GET_SLOT_INFO Failed !\n", __FUNCTION__);
+				return -1;
+			}
+			if (verbose > 1)
+				dprintk("%s: -->CA_GET_SLOT_INFO Success !\n", __FUNCTION__);
+
+			break;
+
+		case CA_GET_CAP:
+			if (verbose > 1)
+				dprintk("%s: Getting Slot capabilities\n", __FUNCTION__);
+			if ((ca_get_slot_caps(state, p_ca_caps, arg)) < 0) {
+				dprintk("%s: -->CA_GET_CAP Failed !\n", __FUNCTION__);
+				return -1;
+			}
+			if (verbose > 1)
+				dprintk("%s: -->CA_GET_CAP Success !\n", __FUNCTION__);
+
+			break;
+
+		case CA_GET_DESCR_INFO:
+			if (verbose > 1)
+				dprintk("%s: Getting descrambler description\n", __FUNCTION__);
+			if ((ca_get_slot_descr(state, p_ca_message, arg)) < 0) {
+				dprintk("%s: -->CA_GET_DESCR_INFO Failed !\n", __FUNCTION__);
+				return -1;
+			}
+			if (verbose > 1)
+				dprintk("%s: -->CA_GET_DESCR_INFO Success !\n", __FUNCTION__);
+
+			break;
+
+		case CA_SET_DESCR:
+			if (verbose > 1)
+				dprintk("%s: Setting descrambler\n", __FUNCTION__);
+			if ((ca_set_slot_descr()) < 0) {
+				dprintk("%s: -->CA_SET_DESCR Failed !\n", __FUNCTION__);
+				return -1;
+			}
+			if (verbose > 1)
+				dprintk("%s: -->CA_SET_DESCR Success !\n", __FUNCTION__);
+
+			break;
+
+		case CA_SET_PID:
+			if (verbose > 1)
+				dprintk("%s: Setting PID\n", __FUNCTION__);
+			if ((ca_set_pid()) < 0) {
+				dprintk("%s: -->CA_SET_PID Failed !\n", __FUNCTION__);
+				return -1;
+			}
+			if (verbose > 1)
+				dprintk("%s: -->CA_SET_PID Success !\n", __FUNCTION__);
+
+		default:
+			return -EOPNOTSUPP;
+		};
+
+	return 0;
+}
+
+static int dst_ca_open(struct inode *inode, struct file *file)
+{
+	if (verbose > 4)
+		dprintk("%s:Device opened [%p]\n", __FUNCTION__, file);
+	try_module_get(THIS_MODULE);
+
+	return 0;
+}
+
+static int dst_ca_release(struct inode *inode, struct file *file)
+{
+	if (verbose > 4)
+		dprintk("%s:Device closed.\n", __FUNCTION__);
+	module_put(THIS_MODULE);
+
+	return 0;
+}
+
+static int dst_ca_read(struct file *file, char __user * buffer, size_t length, loff_t * offset)
+{
+	int bytes_read = 0;
+
+	if (verbose > 4)
+		dprintk("%s:Device read.\n", __FUNCTION__);
+
+	return bytes_read;
+}
+
+static int dst_ca_write(struct file *file, const char __user * buffer, size_t length, loff_t * offset)
+{
+	if (verbose > 4)
+		dprintk("%s:Device write.\n", __FUNCTION__);
+
+	return 0;
+}
+
+static struct file_operations dst_ca_fops = {
+	.owner = THIS_MODULE,
+	.ioctl = (void *)dst_ca_ioctl,
+	.open = dst_ca_open,
+	.release = dst_ca_release,
+	.read = dst_ca_read,
+	.write = dst_ca_write
+};
+
+static struct dvb_device dvbdev_ca = {
+	.priv = NULL,
+	.users = 1,
+	.readers = 1,
+	.writers = 1,
+	.fops = &dst_ca_fops
+};
+
+int dst_ca_attach(struct dst_state *dst, struct dvb_adapter *dvb_adapter)
+{
+	struct dvb_device *dvbdev;
+	if (verbose > 4)
+		dprintk("%s:registering DST-CA device\n", __FUNCTION__);
+	dvb_register_device(dvb_adapter, &dvbdev, &dvbdev_ca, dst, DVB_DEVICE_CA);
+	return 0;
+}
+
+EXPORT_SYMBOL(dst_ca_attach);
+
+MODULE_DESCRIPTION("DST DVB-S/T/C Combo CA driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/bt8xx/dst_ca.h b/drivers/media/dvb/bt8xx/dst_ca.h
new file mode 100644
index 0000000..59cd0dd
--- /dev/null
+++ b/drivers/media/dvb/bt8xx/dst_ca.h
@@ -0,0 +1,58 @@
+/*
+	CA-driver for TwinHan DST Frontend/Card
+
+	Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _DST_CA_H_
+#define _DST_CA_H_
+
+#define RETRIES			5
+
+
+#define	CA_APP_INFO_ENQUIRY	0x9f8020
+#define	CA_APP_INFO		0x9f8021
+#define	CA_ENTER_MENU		0x9f8022
+#define CA_INFO_ENQUIRY		0x9f8030
+#define	CA_INFO			0x9f8031
+#define CA_PMT			0x9f8032
+#define CA_PMT_REPLY		0x9f8033
+
+#define CA_CLOSE_MMI		0x9f8800
+#define CA_DISPLAY_CONTROL	0x9f8801
+#define CA_DISPLAY_REPLY	0x9f8802
+#define CA_TEXT_LAST		0x9f8803
+#define CA_TEXT_MORE		0x9f8804
+#define CA_KEYPAD_CONTROL	0x9f8805
+#define CA_KEYPRESS		0x9f8806
+
+#define CA_ENQUIRY		0x9f8807
+#define CA_ANSWER		0x9f8808
+#define CA_MENU_LAST		0x9f8809
+#define CA_MENU_MORE		0x9f880a
+#define CA_MENU_ANSWER		0x9f880b
+#define CA_LIST_LAST		0x9f880c
+#define CA_LIST_MORE		0x9f880d
+
+
+struct dst_ca_private {
+	struct dst_state *dst;
+	struct dvb_device *dvbdev;
+};
+
+
+#endif
diff --git a/drivers/media/dvb/bt8xx/dst_common.h b/drivers/media/dvb/bt8xx/dst_common.h
new file mode 100644
index 0000000..0b3da29
--- /dev/null
+++ b/drivers/media/dvb/bt8xx/dst_common.h
@@ -0,0 +1,153 @@
+/*
+	Frontend-driver for TwinHan DST Frontend
+
+	Copyright (C) 2003 Jamie Honan
+	Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef DST_COMMON_H
+#define DST_COMMON_H
+
+#include <linux/dvb/frontend.h>
+#include <linux/device.h>
+#include "bt878.h"
+
+#include "dst_ca.h"
+
+
+#define NO_DELAY		0
+#define LONG_DELAY		1
+#define DEVICE_INIT		2
+
+#define DELAY			1
+
+#define DST_TYPE_IS_SAT		0
+#define DST_TYPE_IS_TERR	1
+#define DST_TYPE_IS_CABLE	2
+#define DST_TYPE_IS_ATSC	3
+
+#define DST_TYPE_HAS_NEWTUNE	1
+#define DST_TYPE_HAS_TS204	2
+#define DST_TYPE_HAS_SYMDIV	4
+#define DST_TYPE_HAS_FW_1	8
+#define DST_TYPE_HAS_FW_2	16
+#define DST_TYPE_HAS_FW_3	32
+#define DST_TYPE_HAS_FW_BUILD	64
+
+/*	Card capability list	*/
+
+#define DST_TYPE_HAS_MAC	1
+#define DST_TYPE_HAS_DISEQC3	2
+#define DST_TYPE_HAS_DISEQC4	4
+#define DST_TYPE_HAS_DISEQC5	8
+#define DST_TYPE_HAS_MOTO	16
+#define DST_TYPE_HAS_CA		32
+#define	DST_TYPE_HAS_ANALOG	64	/*	Analog inputs	*/
+#define DST_TYPE_HAS_SESSION	128
+
+
+#define RDC_8820_PIO_0_DISABLE	0
+#define RDC_8820_PIO_0_ENABLE	1
+#define RDC_8820_INT		2
+#define RDC_8820_RESET		4
+
+/*	DST Communication	*/
+#define GET_REPLY		1
+#define NO_REPLY		0
+
+#define GET_ACK			1
+#define FIXED_COMM		8
+
+#define ACK			0xff
+
+struct dst_state {
+
+	struct i2c_adapter* i2c;
+
+	struct bt878* bt;
+
+	struct dvb_frontend_ops ops;
+
+	/* configuration settings */
+	const struct dst_config* config;
+
+	struct dvb_frontend frontend;
+
+	/* private ASIC data */
+	u8 tx_tuna[10];
+	u8 rx_tuna[10];
+	u8 rxbuffer[10];
+	u8 diseq_flags;
+	u8 dst_type;
+	u32 type_flags;
+	u32 frequency;		/* intermediate frequency in kHz for QPSK */
+	fe_spectral_inversion_t inversion;
+	u32 symbol_rate;	/* symbol rate in Symbols per second */
+	fe_code_rate_t fec;
+	fe_sec_voltage_t voltage;
+	fe_sec_tone_mode_t tone;
+	u32 decode_freq;
+	u8 decode_lock;
+	u16 decode_strength;
+	u16 decode_snr;
+	unsigned long cur_jiff;
+	u8 k22;
+	fe_bandwidth_t bandwidth;
+	u32 dst_hw_cap;
+	u8 dst_fw_version;
+	fe_sec_mini_cmd_t minicmd;
+	u8 messages[256];
+};
+
+struct dst_types {
+	char *device_id;
+	int offset;
+	u8 dst_type;
+	u32 type_flags;
+	u32 dst_feature;
+};
+
+
+
+struct dst_config
+{
+	/* the ASIC i2c address */
+	u8 demod_address;
+};
+
+
+int rdc_reset_state(struct dst_state *state);
+int rdc_8820_reset(struct dst_state *state);
+
+int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode);
+int dst_pio_enable(struct dst_state *state);
+int dst_pio_disable(struct dst_state *state);
+int dst_error_recovery(struct dst_state* state);
+int dst_error_bailout(struct dst_state *state);
+int dst_comm_init(struct dst_state* state);
+
+int write_dst(struct dst_state *state, u8 * data, u8 len);
+int read_dst(struct dst_state *state, u8 * ret, u8 len);
+u8 dst_check_sum(u8 * buf, u32 len);
+struct dst_state* dst_attach(struct dst_state* state, struct dvb_adapter *dvb_adapter);
+int dst_ca_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter);
+int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhigh, int delay);
+
+int dst_command(struct dst_state* state, u8 * data, u8 len);
+
+
+#endif // DST_COMMON_H
diff --git a/drivers/media/dvb/bt8xx/dst_priv.h b/drivers/media/dvb/bt8xx/dst_priv.h
index 80488aa..3974a4c 100644
--- a/drivers/media/dvb/bt8xx/dst_priv.h
+++ b/drivers/media/dvb/bt8xx/dst_priv.h
@@ -33,4 +33,3 @@
 struct bt878;
 
 int bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp);
-
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index b735397..6f857c6 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -142,7 +142,7 @@
 	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
 
 	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
-        mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
+	mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
 	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
 
 	return 0;
@@ -161,7 +161,7 @@
 	else if (params->frequency < 771000000) cp = 0xbc;
 	else cp = 0xf4;
 
-        if (params->frequency == 0) bs = 0x03;
+	if (params->frequency == 0) bs = 0x03;
 	else if (params->frequency < 443250000) bs = 0x02;
 	else bs = 0x08;
 
@@ -190,44 +190,44 @@
 
 
    u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
-               1576000,1718000,1856000,2036000,2150000};
+	       1576000,1718000,1856000,2036000,2150000};
    u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
-               0x00102000,0x00104000,0x00108000,0x00110000,
-               0x00120000,0x00140000};
+	       0x00102000,0x00104000,0x00108000,0x00110000,
+	       0x00120000,0x00140000};
 
 #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
-        printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
+	printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
 
-        /* This is really the bit driving the tuner chip cx24108 */
+	/* This is really the bit driving the tuner chip cx24108 */
 
-        if(freq<950000) freq=950000; /* kHz */
-        if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
+	if(freq<950000) freq=950000; /* kHz */
+	if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
 
-        /* decide which VCO to use for the input frequency */
-        for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
-        printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
-        band=bandsel[i];
-        /* the gain values must be set by SetSymbolrate */
-        /* compute the pll divider needed, from Conexant data sheet,
-           resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
-           depending on the divider bit. It is set to /4 on the 2 lowest
-           bands  */
-        n=((i<=2?2:1)*freq*10L)/(XTAL/100);
-        a=n%32; n/=32; if(a==0) n--;
-        pump=(freq<(osci[i-1]+osci[i])/2);
-        pll=0xf8000000|
-            ((pump?1:2)<<(14+11))|
-            ((n&0x1ff)<<(5+11))|
-            ((a&0x1f)<<11);
-        /* everything is shifted left 11 bits to left-align the bits in the
-           32bit word. Output to the tuner goes MSB-aligned, after all */
-        printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
-        cx24110_pll_write(fe,band);
-        /* set vga and vca to their widest-band settings, as a precaution.
-           SetSymbolrate might not be called to set this up */
-        cx24110_pll_write(fe,0x500c0000);
-        cx24110_pll_write(fe,0x83f1f800);
-        cx24110_pll_write(fe,pll);
+	/* decide which VCO to use for the input frequency */
+	for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
+	printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
+	band=bandsel[i];
+	/* the gain values must be set by SetSymbolrate */
+	/* compute the pll divider needed, from Conexant data sheet,
+	   resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
+	   depending on the divider bit. It is set to /4 on the 2 lowest
+	   bands  */
+	n=((i<=2?2:1)*freq*10L)/(XTAL/100);
+	a=n%32; n/=32; if(a==0) n--;
+	pump=(freq<(osci[i-1]+osci[i])/2);
+	pll=0xf8000000|
+	    ((pump?1:2)<<(14+11))|
+	    ((n&0x1ff)<<(5+11))|
+	    ((a&0x1f)<<11);
+	/* everything is shifted left 11 bits to left-align the bits in the
+	   32bit word. Output to the tuner goes MSB-aligned, after all */
+	printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
+	cx24110_pll_write(fe,band);
+	/* set vga and vca to their widest-band settings, as a precaution.
+	   SetSymbolrate might not be called to set this up */
+	cx24110_pll_write(fe,0x500c0000);
+	cx24110_pll_write(fe,0x83f1f800);
+	cx24110_pll_write(fe,pll);
 /*        writereg(client,0x56,0x7f);*/
 
 	return 0;
@@ -299,7 +299,7 @@
 	static u8 mt352_reset [] = { 0x50, 0x80 };
 	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
 	static u8 mt352_agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF,
-	                               0x00, 0xFF, 0x00, 0x40, 0x40 };
+				       0x00, 0xFF, 0x00, 0x40, 0x40 };
 	static u8 mt352_av771_extra[] = { 0xB5, 0x7A };
 	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
 
@@ -463,6 +463,9 @@
 
 static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 {
+	int ret;
+	struct dst_state* state = NULL;
+
 	switch(type) {
 #ifdef BTTV_DVICO_DVBT_LITE
 	case BTTV_DVICO_DVBT_LITE:
@@ -503,7 +506,25 @@
 		break;
 
 	case BTTV_TWINHAN_DST:
-		card->fe = dst_attach(&dst_config, card->i2c_adapter, card->bt);
+		/*	DST is not a frontend driver !!!		*/
+		state = (struct dst_state *) kmalloc(sizeof (struct dst_state), GFP_KERNEL);
+		/*	Setup the Card					*/
+		state->config = &dst_config;
+		state->i2c = card->i2c_adapter;
+		state->bt = card->bt;
+
+		/*	DST is not a frontend, attaching the ASIC	*/
+		if ((dst_attach(state, &card->dvb_adapter)) == NULL) {
+			printk("%s: Could not find a Twinhan DST.\n", __FUNCTION__);
+			break;
+		}
+		card->fe = &state->frontend;
+
+		/*	Attach other DST peripherals if any		*/
+		/*	Conditional Access device			*/
+		if (state->dst_hw_cap & DST_TYPE_HAS_CA) {
+			ret = dst_ca_attach(state, &card->dvb_adapter);
+		}
 		if (card->fe != NULL) {
 			break;
 		}
@@ -531,7 +552,7 @@
 		       card->bt->dev->subsystem_vendor,
 		       card->bt->dev->subsystem_device);
 	} else {
-		if (dvb_register_frontend(card->dvb_adapter, card->fe)) {
+		if (dvb_register_frontend(&card->dvb_adapter, card->fe)) {
 			printk("dvb-bt8xx: Frontend registration failed!\n");
 			if (card->fe->ops->release)
 				card->fe->ops->release(card->fe);
@@ -550,7 +571,7 @@
 		return result;
 
 	}
-	card->dvb_adapter->priv = card;
+	card->dvb_adapter.priv = card;
 
 	card->bt->adapter = card->i2c_adapter;
 
@@ -568,7 +589,7 @@
 	if ((result = dvb_dmx_init(&card->demux)) < 0) {
 		printk("dvb_bt8xx: dvb_dmx_init failed (errno = %d)\n", result);
 
-		dvb_unregister_adapter(card->dvb_adapter);
+		dvb_unregister_adapter(&card->dvb_adapter);
 		return result;
 	}
 
@@ -576,11 +597,11 @@
 	card->dmxdev.demux = &card->demux.dmx;
 	card->dmxdev.capabilities = 0;
 
-	if ((result = dvb_dmxdev_init(&card->dmxdev, card->dvb_adapter)) < 0) {
+	if ((result = dvb_dmxdev_init(&card->dmxdev, &card->dvb_adapter)) < 0) {
 		printk("dvb_bt8xx: dvb_dmxdev_init failed (errno = %d)\n", result);
 
 		dvb_dmx_release(&card->demux);
-		dvb_unregister_adapter(card->dvb_adapter);
+		dvb_unregister_adapter(&card->dvb_adapter);
 		return result;
 	}
 
@@ -591,7 +612,7 @@
 
 		dvb_dmxdev_release(&card->dmxdev);
 		dvb_dmx_release(&card->demux);
-		dvb_unregister_adapter(card->dvb_adapter);
+		dvb_unregister_adapter(&card->dvb_adapter);
 		return result;
 	}
 
@@ -603,7 +624,7 @@
 		card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
 		dvb_dmxdev_release(&card->dmxdev);
 		dvb_dmx_release(&card->demux);
-		dvb_unregister_adapter(card->dvb_adapter);
+		dvb_unregister_adapter(&card->dvb_adapter);
 		return result;
 	}
 
@@ -614,11 +635,11 @@
 		card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
 		dvb_dmxdev_release(&card->dmxdev);
 		dvb_dmx_release(&card->demux);
-		dvb_unregister_adapter(card->dvb_adapter);
+		dvb_unregister_adapter(&card->dvb_adapter);
 		return result;
 	}
 
-	dvb_net_init(card->dvb_adapter, &card->dvbnet, &card->demux.dmx);
+	dvb_net_init(&card->dvb_adapter, &card->dvbnet, &card->demux.dmx);
 
 	tasklet_init(&card->bt->tasklet, dvb_bt8xx_task, (unsigned long) card);
 
@@ -648,7 +669,7 @@
 	case BTTV_PINNACLESAT:
 		card->gpio_mode = 0x0400c060;
 		/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
-		              BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
+			      BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
 		card->op_sync_orin = 0;
 		card->irq_err_ignore = 0;
 		break;
@@ -759,7 +780,7 @@
 	dvb_dmxdev_release(&card->dmxdev);
 	dvb_dmx_release(&card->demux);
 	if (card->fe) dvb_unregister_frontend(card->fe);
-	dvb_unregister_adapter(card->dvb_adapter);
+	dvb_unregister_adapter(&card->dvb_adapter);
 
 	kfree(card);
 
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/drivers/media/dvb/bt8xx/dvb-bt8xx.h
index 80ef189..2923b3b 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.h
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.h
@@ -31,7 +31,7 @@
 #include "bttv.h"
 #include "mt352.h"
 #include "sp887x.h"
-#include "dst.h"
+#include "dst_common.h"
 #include "nxt6000.h"
 #include "cx24110.h"
 #include "or51211.h"
@@ -40,7 +40,7 @@
 	struct semaphore lock;
 	int nfeeds;
 	char card_name[32];
-	struct dvb_adapter *dvb_adapter;
+	struct dvb_adapter dvb_adapter;
 	struct bt878 *bt;
 	unsigned int bttv_nr;
 	struct dvb_demux demux;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 28d4d92..96c57fd 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -119,7 +119,7 @@
 	struct dvb_demux demux;
 	struct usb_device *udev;
 	struct semaphore sem;
-	struct dvb_adapter *adapter;
+	struct dvb_adapter adapter;
 	struct dvb_device *fedev;
 	struct dmxdev dmxdev;
 	struct dvb_net dvbnet;
@@ -813,15 +813,15 @@
 	cinergyt2->dmxdev.demux = &cinergyt2->demux.dmx;
 	cinergyt2->dmxdev.capabilities = 0;
 
-	if ((err = dvb_dmxdev_init(&cinergyt2->dmxdev, cinergyt2->adapter)) < 0) {
+	if ((err = dvb_dmxdev_init(&cinergyt2->dmxdev, &cinergyt2->adapter)) < 0) {
 		dprintk(1, "dvb_dmxdev_init() failed (err = %d)\n", err);
 		goto bailout;
 	}
 
-	if (dvb_net_init(cinergyt2->adapter, &cinergyt2->dvbnet, &cinergyt2->demux.dmx))
+	if (dvb_net_init(&cinergyt2->adapter, &cinergyt2->dvbnet, &cinergyt2->demux.dmx))
 		dprintk(1, "dvb_net_init() failed!\n");
 
-	dvb_register_device(cinergyt2->adapter, &cinergyt2->fedev,
+	dvb_register_device(&cinergyt2->adapter, &cinergyt2->fedev,
 			    &cinergyt2_fe_template, cinergyt2,
 			    DVB_DEVICE_FRONTEND);
 
@@ -848,7 +848,7 @@
 bailout:
 	dvb_dmxdev_release(&cinergyt2->dmxdev);
 	dvb_dmx_release(&cinergyt2->demux);
-	dvb_unregister_adapter (cinergyt2->adapter);
+	dvb_unregister_adapter (&cinergyt2->adapter);
 	cinergyt2_free_stream_urbs (cinergyt2);
 	kfree(cinergyt2);
 	return -ENOMEM;
@@ -872,7 +872,7 @@
 	dvb_dmxdev_release(&cinergyt2->dmxdev);
 	dvb_dmx_release(&cinergyt2->demux);
 	dvb_unregister_device(cinergyt2->fedev);
-	dvb_unregister_adapter(cinergyt2->adapter);
+	dvb_unregister_adapter(&cinergyt2->adapter);
 
 	cinergyt2_free_stream_urbs(cinergyt2);
 	up(&cinergyt2->sem);
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c b/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c
index 04e54ec..400b439 100644
--- a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c
@@ -131,7 +131,7 @@
 		deb_info("dvb_register_adapter failed: error %d", ret);
 		goto err;
 	}
-	dib->adapter->priv = dib;
+	dib->adapter.priv = dib;
 	
 /* i2c is done in dibusb_i2c_init */
 	
@@ -151,18 +151,18 @@
 	dib->dmxdev.filternum = dib->demux.filternum;
 	dib->dmxdev.demux = &dib->demux.dmx;
 	dib->dmxdev.capabilities = 0;
-	if ((ret = dvb_dmxdev_init(&dib->dmxdev, dib->adapter)) < 0) {
+	if ((ret = dvb_dmxdev_init(&dib->dmxdev, &dib->adapter)) < 0) {
 		err("dvb_dmxdev_init failed: error %d",ret);
 		goto err_dmx_dev;
 	}
 
-	dvb_net_init(dib->adapter, &dib->dvb_net, &dib->demux.dmx);
+	dvb_net_init(&dib->adapter, &dib->dvb_net, &dib->demux.dmx);
 
 	goto success;
 err_dmx_dev:
 	dvb_dmx_release(&dib->demux);
 err_dmx:
-	dvb_unregister_adapter(dib->adapter);
+	dvb_unregister_adapter(&dib->adapter);
 err:
 	return ret;
 success:
@@ -179,7 +179,7 @@
 		dib->demux.dmx.close(&dib->demux.dmx);
 		dvb_dmxdev_release(&dib->dmxdev);
 		dvb_dmx_release(&dib->demux);
-		dvb_unregister_adapter(dib->adapter);
+		dvb_unregister_adapter(&dib->adapter);
 	}
 	return 0;
 }
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c b/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c
index 2ed8948..5a71b88 100644
--- a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c
@@ -183,7 +183,7 @@
 		       dib->dibdev->name);
 		return -ENODEV;
 	} else {
-		if (dvb_register_frontend(dib->adapter, dib->fe)) {
+		if (dvb_register_frontend(&dib->adapter, dib->fe)) {
 			err("Frontend registration failed.");
 			if (dib->fe->ops->release)
 				dib->fe->ops->release(dib->fe);
@@ -206,7 +206,7 @@
 {
 	int ret = 0;
 
-	dib->adapter->priv = dib;
+	dib->adapter.priv = dib;
 
 	strncpy(dib->i2c_adap.name,dib->dibdev->name,I2C_NAME_SIZE);
 #ifdef I2C_ADAP_CLASS_TV_DIGITAL
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb.h b/drivers/media/dvb/dibusb/dvb-dibusb.h
index 52cd35d..c965b64 100644
--- a/drivers/media/dvb/dibusb/dvb-dibusb.h
+++ b/drivers/media/dvb/dibusb/dvb-dibusb.h
@@ -181,7 +181,7 @@
 	struct semaphore i2c_sem;
 
 	/* dvb */
-	struct dvb_adapter *adapter;
+	struct dvb_adapter adapter;
 	struct dmxdev dmxdev;
 	struct dvb_demux demux;
 	struct dvb_net dvb_net;
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 1863f1d..c225de7 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -175,8 +175,8 @@
 
 static int dvb_dvr_open(struct inode *inode, struct file *file)
 {
-	struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
-	struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dmxdev *dmxdev = dvbdev->priv;
 	struct dmx_frontend *front;
 
 	dprintk ("function : %s\n", __FUNCTION__);
@@ -224,8 +224,8 @@
 
 static int dvb_dvr_release(struct inode *inode, struct file *file)
 {
-	struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
-	struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dmxdev *dmxdev = dvbdev->priv;
 
 	if (down_interruptible (&dmxdev->mutex))
 		return -ERESTARTSYS;
@@ -252,8 +252,8 @@
 static ssize_t dvb_dvr_write(struct file *file, const char __user *buf,
 		size_t count, loff_t *ppos)
 {
-	struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
-	struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dmxdev *dmxdev = dvbdev->priv;
 	int ret;
 
 	if (!dmxdev->demux->write)
@@ -270,8 +270,8 @@
 static ssize_t dvb_dvr_read(struct file *file, char __user *buf, size_t count,
 		loff_t *ppos)
 {
-	struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
-	struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dmxdev *dmxdev = dvbdev->priv;
 	int ret;
 
 	//down(&dmxdev->mutex);
@@ -345,7 +345,7 @@
 			    const u8 *buffer2, size_t buffer2_len,
 			    struct dmx_section_filter *filter, enum dmx_success success)
 {
-	struct dmxdev_filter *dmxdevfilter=(struct dmxdev_filter *) filter->priv;
+	struct dmxdev_filter *dmxdevfilter = filter->priv;
 	int ret;
 
 	if (dmxdevfilter->buffer.error) {
@@ -381,7 +381,7 @@
 		       const u8 *buffer2, size_t buffer2_len,
 		       struct dmx_ts_feed *feed, enum dmx_success success)
 {
-	struct dmxdev_filter *dmxdevfilter=(struct dmxdev_filter *) feed->priv;
+	struct dmxdev_filter *dmxdevfilter = feed->priv;
 	struct dmxdev_buffer *buffer;
 	int ret;
 
@@ -684,8 +684,8 @@
 
 static int dvb_demux_open(struct inode *inode, struct file *file)
 {
-	struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
-	struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dmxdev *dmxdev = dvbdev->priv;
 	int i;
 	struct dmxdev_filter *dmxdevfilter;
 
@@ -1013,8 +1013,8 @@
 static int dvb_dvr_do_ioctl(struct inode *inode, struct file *file,
 		     unsigned int cmd, void *parg)
 {
-	struct dvb_device *dvbdev=(struct dvb_device *) file->private_data;
-	struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dmxdev *dmxdev = dvbdev->priv;
 
 	int ret=0;
 
@@ -1044,8 +1044,8 @@
 
 static unsigned int dvb_dvr_poll (struct file *file, poll_table *wait)
 {
-	struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
-	struct dmxdev *dmxdev = (struct dmxdev *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dmxdev *dmxdev = dvbdev->priv;
 	unsigned int mask = 0;
 
 	dprintk ("function : %s\n", __FUNCTION__);
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index c1ea89f..0eb9aa7 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -829,7 +829,7 @@
  */
 void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, int change_type)
 {
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private;
+	struct dvb_ca_private *ca = pubca->private;
 
 	dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type);
 
@@ -857,7 +857,7 @@
  */
 void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot)
 {
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private;
+	struct dvb_ca_private *ca = pubca->private;
 
 	dprintk("CAMREADY IRQ slot:%i\n", slot);
 
@@ -876,7 +876,7 @@
  */
 void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot)
 {
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private;
+	struct dvb_ca_private *ca = pubca->private;
 	int flags;
 
 	dprintk("FR/DA IRQ slot:%i\n", slot);
@@ -993,7 +993,7 @@
  */
 static int dvb_ca_en50221_thread(void *data)
 {
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) data;
+	struct dvb_ca_private *ca = data;
 	char name[15];
 	int slot;
 	int flags;
@@ -1202,8 +1202,8 @@
 static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file,
 				      unsigned int cmd, void *parg)
 {
-	struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dvb_ca_private *ca = dvbdev->priv;
 	int err = 0;
 	int slot;
 
@@ -1225,7 +1225,7 @@
 		break;
 
 	case CA_GET_CAP: {
-		struct ca_caps *caps = (struct ca_caps *) parg;
+		struct ca_caps *caps = parg;
 
 		caps->slot_num = ca->slot_count;
 		caps->slot_type = CA_CI_LINK;
@@ -1235,7 +1235,7 @@
 	}
 
 	case CA_GET_SLOT_INFO: {
-		struct ca_slot_info *info = (struct ca_slot_info *) parg;
+		struct ca_slot_info *info = parg;
 
 		if ((info->num > ca->slot_count) || (info->num < 0))
 			return -EINVAL;
@@ -1291,8 +1291,8 @@
 static ssize_t dvb_ca_en50221_io_write(struct file *file,
 				       const char __user * buf, size_t count, loff_t * ppos)
 {
-	struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dvb_ca_private *ca = dvbdev->priv;
 	u8 slot, connection_id;
 	int status;
 	char fragbuf[HOST_LINK_BUF_SIZE];
@@ -1428,8 +1428,8 @@
 static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf,
 				      size_t count, loff_t * ppos)
 {
-	struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dvb_ca_private *ca = dvbdev->priv;
 	int status;
 	int result = 0;
 	u8 hdr[2];
@@ -1526,8 +1526,8 @@
  */
 static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
 {
-	struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dvb_ca_private *ca = dvbdev->priv;
 	int err;
 	int i;
 
@@ -1569,8 +1569,8 @@
  */
 static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
 {
-	struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dvb_ca_private *ca = dvbdev->priv;
 	int err = 0;
 
 	dprintk("%s\n", __FUNCTION__);
@@ -1597,8 +1597,8 @@
  */
 static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table * wait)
 {
-	struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dvb_ca_private *ca = dvbdev->priv;
 	unsigned int mask = 0;
 	int slot;
 	int result = 0;
@@ -1750,7 +1750,7 @@
  */
 void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
 {
-	struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private;
+	struct dvb_ca_private *ca = pubca->private;
 	int i;
 
 	dprintk("%s\n", __FUNCTION__);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 59a9adf..d19301d 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -48,7 +48,7 @@
 static int dvb_powerdown_on_sleep = 1;
 
 module_param_named(frontend_debug, dvb_frontend_debug, int, 0644);
-MODULE_PARM_DESC(dvb_frontend_debug, "Turn on/off frontend core debugging (default:off).");
+MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off).");
 module_param(dvb_shutdown_timeout, int, 0444);
 MODULE_PARM_DESC(dvb_shutdown_timeout, "wait <shutdown_timeout> seconds after close() before suspending hardware");
 module_param(dvb_force_auto_inversion, int, 0444);
@@ -117,7 +117,7 @@
 
 static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status)
 {
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 	struct dvb_fe_events *events = &fepriv->events;
 	struct dvb_frontend_event *e;
 	int wp;
@@ -155,7 +155,7 @@
 static int dvb_frontend_get_event(struct dvb_frontend *fe,
 			    struct dvb_frontend_event *event, int flags)
 {
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 	struct dvb_fe_events *events = &fepriv->events;
 
 	dprintk ("%s\n", __FUNCTION__);
@@ -234,7 +234,7 @@
 {
 	int autoinversion;
 	int ready = 0;
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 	int original_inversion = fepriv->parameters.inversion;
 	u32 original_frequency = fepriv->parameters.frequency;
 
@@ -321,7 +321,7 @@
 
 static int dvb_frontend_is_exiting(struct dvb_frontend *fe)
 {
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	if (fepriv->exit)
 		return 1;
@@ -335,7 +335,7 @@
 
 static int dvb_frontend_should_wakeup(struct dvb_frontend *fe)
 {
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	if (fepriv->wakeup) {
 		fepriv->wakeup = 0;
@@ -346,7 +346,7 @@
 
 static void dvb_frontend_wakeup(struct dvb_frontend *fe)
 {
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	fepriv->wakeup = 1;
 	wake_up_interruptible(&fepriv->wait_queue);
@@ -357,8 +357,8 @@
  */
 static int dvb_frontend_thread(void *data)
 {
-	struct dvb_frontend *fe = (struct dvb_frontend *) data;
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend *fe = data;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 	unsigned long timeout;
 	char name [15];
 	int quality = 0, delay = 3*HZ;
@@ -520,7 +520,7 @@
 static void dvb_frontend_stop(struct dvb_frontend *fe)
 {
 	unsigned long ret;
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	dprintk ("%s\n", __FUNCTION__);
 
@@ -559,7 +559,7 @@
 static int dvb_frontend_start(struct dvb_frontend *fe)
 {
 	int ret;
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	dprintk ("%s\n", __FUNCTION__);
 
@@ -597,7 +597,7 @@
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct dvb_frontend *fe = dvbdev->priv;
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 	int err = -EOPNOTSUPP;
 
 	dprintk ("%s\n", __FUNCTION__);
@@ -615,7 +615,7 @@
 
 	switch (cmd) {
 	case FE_GET_INFO: {
-		struct dvb_frontend_info* info = (struct dvb_frontend_info*) parg;
+		struct dvb_frontend_info* info = parg;
 		memcpy(info, &fe->ops->info, sizeof(struct dvb_frontend_info));
 
 		/* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't
@@ -793,7 +793,7 @@
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct dvb_frontend *fe = dvbdev->priv;
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	dprintk ("%s\n", __FUNCTION__);
 
@@ -809,7 +809,7 @@
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct dvb_frontend *fe = dvbdev->priv;
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 	int ret;
 
 	dprintk ("%s\n", __FUNCTION__);
@@ -833,7 +833,7 @@
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct dvb_frontend *fe = dvbdev->priv;
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	dprintk ("%s\n", __FUNCTION__);
 
@@ -873,7 +873,7 @@
 		up(&frontend_mutex);
 		return -ENOMEM;
 	}
-	fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	fepriv = fe->frontend_priv;
 	memset(fe->frontend_priv, 0, sizeof(struct dvb_frontend_private));
 
 	init_MUTEX (&fepriv->sem);
@@ -897,7 +897,7 @@
 
 int dvb_unregister_frontend(struct dvb_frontend* fe)
 {
-	struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv;
+	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 	dprintk ("%s\n", __FUNCTION__);
 
 	down (&frontend_mutex);
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 44892e7..6a968c3 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -315,7 +315,7 @@
  */
 static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
 {
-	struct dvb_net_priv *priv = (struct dvb_net_priv *)dev->priv;
+	struct dvb_net_priv *priv = dev->priv;
 	unsigned long skipped = 0L;
 	u8 *ts, *ts_end, *from_where = NULL, ts_remain = 0, how_much = 0, new_ts = 1;
 	struct ethhdr *ethh = NULL;
@@ -709,7 +709,7 @@
 			       const u8 *buffer2, size_t buffer2_len,
 			       struct dmx_ts_feed *feed, enum dmx_success success)
 {
-	struct net_device *dev = (struct net_device *)feed->priv;
+	struct net_device *dev = feed->priv;
 
 	if (buffer2 != 0)
 		printk(KERN_WARNING "buffer2 not 0: %p.\n", buffer2);
@@ -727,6 +727,7 @@
         u8 *eth;
         struct sk_buff *skb;
 	struct net_device_stats *stats = &(((struct dvb_net_priv *) dev->priv)->stats);
+	int snap = 0;
 
 	/* note: pkt_len includes a 32bit checksum */
 	if (pkt_len < 16) {
@@ -750,9 +751,12 @@
 		return;
 	}
 	if (pkt[5] & 0x02) {
-		//FIXME: handle LLC/SNAP
-                stats->rx_dropped++;
-                return;
+		/* handle LLC/SNAP, see rfc-1042 */
+		if (pkt_len < 24 || memcmp(&pkt[12], "\xaa\xaa\x03\0\0\0", 6)) {
+			stats->rx_dropped++;
+			return;
+		}
+		snap = 8;
         }
 	if (pkt[7]) {
 		/* FIXME: assemble datagram from multiple sections */
@@ -762,9 +766,9 @@
 	}
 
 	/* we have 14 byte ethernet header (ip header follows);
-	 * 12 byte MPE header; 4 byte checksum; + 2 byte alignment
+	 * 12 byte MPE header; 4 byte checksum; + 2 byte alignment, 8 byte LLC/SNAP
 	 */
-	if (!(skb = dev_alloc_skb(pkt_len - 4 - 12 + 14 + 2))) {
+	if (!(skb = dev_alloc_skb(pkt_len - 4 - 12 + 14 + 2 - snap))) {
 		//printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
 		stats->rx_dropped++;
 		return;
@@ -773,8 +777,8 @@
 	skb->dev = dev;
 
 	/* copy L3 payload */
-	eth = (u8 *) skb_put(skb, pkt_len - 12 - 4 + 14);
-	memcpy(eth + 14, pkt + 12, pkt_len - 12 - 4);
+	eth = (u8 *) skb_put(skb, pkt_len - 12 - 4 + 14 - snap);
+	memcpy(eth + 14, pkt + 12 + snap, pkt_len - 12 - 4 - snap);
 
 	/* create ethernet header: */
         eth[0]=pkt[0x0b];
@@ -786,8 +790,21 @@
 
         eth[6]=eth[7]=eth[8]=eth[9]=eth[10]=eth[11]=0;
 
-	eth[12] = 0x08;	/* ETH_P_IP */
-	eth[13] = 0x00;
+	if (snap) {
+		eth[12] = pkt[18];
+		eth[13] = pkt[19];
+	} else {
+		/* protocol numbers are from rfc-1700 or
+		 * http://www.iana.org/assignments/ethernet-numbers
+		 */
+		if (pkt[12] >> 4 == 6) { /* version field from IP header */
+			eth[12] = 0x86;	/* IPv6 */
+			eth[13] = 0xdd;
+		} else {
+			eth[12] = 0x08;	/* IPv4 */
+			eth[13] = 0x00;
+		}
+	}
 
 	skb->protocol = dvb_net_eth_type_trans(skb, dev);
 
@@ -801,7 +818,7 @@
 		 struct dmx_section_filter *filter,
 		 enum dmx_success success)
 {
-        struct net_device *dev=(struct net_device *) filter->priv;
+        struct net_device *dev = filter->priv;
 
 	/**
 	 * we rely on the DVB API definition where exactly one complete
@@ -826,7 +843,7 @@
 		   struct dmx_section_filter **secfilter,
 		   u8 *mac, u8 *mac_mask)
 {
-	struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+	struct dvb_net_priv *priv = dev->priv;
 	int ret;
 
 	*secfilter=NULL;
@@ -870,7 +887,7 @@
 static int dvb_net_feed_start(struct net_device *dev)
 {
 	int ret, i;
-	struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+	struct dvb_net_priv *priv = dev->priv;
         struct dmx_demux *demux = priv->demux;
         unsigned char *mac = (unsigned char *) dev->dev_addr;
 
@@ -965,7 +982,7 @@
 
 static int dvb_net_feed_stop(struct net_device *dev)
 {
-	struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+	struct dvb_net_priv *priv = dev->priv;
 	int i;
 
 	dprintk("%s\n", __FUNCTION__);
@@ -1016,7 +1033,7 @@
 
 static int dvb_set_mc_filter (struct net_device *dev, struct dev_mc_list *mc)
 {
-	struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+	struct dvb_net_priv *priv = dev->priv;
 
 	if (priv->multi_num == DVB_NET_MULTICAST_MAX)
 		return -ENOMEM;
@@ -1031,7 +1048,7 @@
 static void wq_set_multicast_list (void *data)
 {
 	struct net_device *dev = data;
-	struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+	struct dvb_net_priv *priv = dev->priv;
 
 	dvb_net_feed_stop(dev);
 
@@ -1066,7 +1083,7 @@
 
 static void dvb_net_set_multicast_list (struct net_device *dev)
 {
-	struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+	struct dvb_net_priv *priv = dev->priv;
 	schedule_work(&priv->set_multicast_list_wq);
 }
 
@@ -1084,7 +1101,7 @@
 
 static int dvb_net_set_mac (struct net_device *dev, void *p)
 {
-	struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+	struct dvb_net_priv *priv = dev->priv;
 	struct sockaddr *addr=p;
 
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
@@ -1098,7 +1115,7 @@
 
 static int dvb_net_open(struct net_device *dev)
 {
-	struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+	struct dvb_net_priv *priv = dev->priv;
 
 	priv->in_use++;
 	dvb_net_feed_start(dev);
@@ -1108,7 +1125,7 @@
 
 static int dvb_net_stop(struct net_device *dev)
 {
-	struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv;
+	struct dvb_net_priv *priv = dev->priv;
 
 	priv->in_use--;
         return dvb_net_feed_stop(dev);
@@ -1228,8 +1245,8 @@
 static int dvb_net_do_ioctl(struct inode *inode, struct file *file,
 		  unsigned int cmd, void *parg)
 {
-	struct dvb_device *dvbdev = (struct dvb_device *) file->private_data;
-	struct dvb_net *dvbnet = (struct dvb_net *) dvbdev->priv;
+	struct dvb_device *dvbdev = file->private_data;
+	struct dvb_net *dvbnet = dvbdev->priv;
 
 	if (((file->f_flags&O_ACCMODE)==O_RDONLY))
 		return -EPERM;
@@ -1237,7 +1254,7 @@
 	switch (cmd) {
 	case NET_ADD_IF:
 	{
-		struct dvb_net_if *dvbnetif=(struct dvb_net_if *)parg;
+		struct dvb_net_if *dvbnetif = parg;
 		int result;
 
 		if (!capable(CAP_SYS_ADMIN))
@@ -1258,7 +1275,7 @@
 	{
 		struct net_device *netdev;
 		struct dvb_net_priv *priv_data;
-		struct dvb_net_if *dvbnetif=(struct dvb_net_if *)parg;
+		struct dvb_net_if *dvbnetif = parg;
 
 		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
 		    !dvbnet->state[dvbnetif->if_num])
@@ -1266,7 +1283,7 @@
 
 		netdev = dvbnet->device[dvbnetif->if_num];
 
-		priv_data=(struct dvb_net_priv*)netdev->priv;
+		priv_data = netdev->priv;
 		dvbnetif->pid=priv_data->pid;
 		dvbnetif->feedtype=priv_data->feedtype;
 		break;
@@ -1288,7 +1305,7 @@
 	/* binary compatiblity cruft */
 	case __NET_ADD_IF_OLD:
 	{
-		struct __dvb_net_if_old *dvbnetif=(struct __dvb_net_if_old *)parg;
+		struct __dvb_net_if_old *dvbnetif = parg;
 		int result;
 
 		if (!capable(CAP_SYS_ADMIN))
@@ -1309,7 +1326,7 @@
 	{
 		struct net_device *netdev;
 		struct dvb_net_priv *priv_data;
-		struct __dvb_net_if_old *dvbnetif=(struct __dvb_net_if_old *)parg;
+		struct __dvb_net_if_old *dvbnetif = parg;
 
 		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
 		    !dvbnet->state[dvbnetif->if_num])
@@ -1317,7 +1334,7 @@
 
 		netdev = dvbnet->device[dvbnetif->if_num];
 
-		priv_data=(struct dvb_net_priv*)netdev->priv;
+		priv_data = netdev->priv;
 		dvbnetif->pid=priv_data->pid;
 		break;
 	}
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index cf4ffe3..9d9662f4 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -286,9 +286,8 @@
 }
 
 
-int dvb_register_adapter(struct dvb_adapter **padap, const char *name, struct module *module)
+int dvb_register_adapter(struct dvb_adapter *adap, const char *name, struct module *module)
 {
-	struct dvb_adapter *adap;
 	int num;
 
 	if (down_interruptible (&dvbdev_register_lock))
@@ -299,11 +298,6 @@
 		return -ENFILE;
 	}
 
-	if (!(*padap = adap = kmalloc(sizeof(struct dvb_adapter), GFP_KERNEL))) {
-		up(&dvbdev_register_lock);
-		return -ENOMEM;
-	}
-
 	memset (adap, 0, sizeof(struct dvb_adapter));
 	INIT_LIST_HEAD (&adap->device_list);
 
@@ -331,7 +325,6 @@
 		return -ERESTARTSYS;
 	list_del (&adap->list_head);
 	up (&dvbdev_register_lock);
-	kfree (adap);
 	return 0;
 }
 EXPORT_SYMBOL(dvb_unregister_adapter);
diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h
index 184edba..a251867 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.h
+++ b/drivers/media/dvb/dvb-core/dvbdev.h
@@ -76,7 +76,7 @@
 };
 
 
-extern int dvb_register_adapter (struct dvb_adapter **padap, const char *name, struct module *module);
+extern int dvb_register_adapter (struct dvb_adapter *adap, const char *name, struct module *module);
 extern int dvb_unregister_adapter (struct dvb_adapter *adap);
 
 extern int dvb_register_device (struct dvb_adapter *adap,
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 0bfd4df..75fb556 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -12,10 +12,10 @@
 
 config DVB_CX24110
 	tristate "Conexant CX24110 based"
- 	depends on DVB_CORE
- 	help
+	depends on DVB_CORE
+	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
- 
+
 config DVB_TDA8083
 	tristate "Philips TDA8083 based"
 	depends on DVB_CORE
@@ -127,8 +127,8 @@
 config DVB_ATMEL_AT76C651
 	tristate "Atmel AT76C651 based"
 	depends on DVB_CORE
-        help
- 	  A DVB-C tuner module. Say Y when you want to support this frontend.
+	help
+	  A DVB-C tuner module. Say Y when you want to support this frontend.
 
 config DVB_VES1820
 	tristate "VLSI VES1820 based"
@@ -158,10 +158,6 @@
 	help
 	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
 
-config DVB_OR51132
-	tristate "OR51132 based (pcHDTV)"
-	depends on DVB_CORE
-
 config DVB_OR51211
 	tristate "or51211 based (pcHDTV HD2000 card)"
 	depends on DVB_CORE
@@ -169,4 +165,12 @@
 	help
 	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
 
+config DVB_OR51132
+	tristate "OR51132 based (pcHDTV HD3000 card)"
+	depends on DVB_CORE
+	select FW_LOADER
+	help
+	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+	  to support this frontend.
+
 endmenu
diff --git a/drivers/media/dvb/frontends/at76c651.c b/drivers/media/dvb/frontends/at76c651.c
index ce2eaa1..72a2b54 100644
--- a/drivers/media/dvb/frontends/at76c651.c
+++ b/drivers/media/dvb/frontends/at76c651.c
@@ -259,7 +259,7 @@
 				   struct dvb_frontend_parameters *p)
 {
 	int ret;
-	struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+	struct at76c651_state* state = fe->demodulator_priv;
 
 	at76c651_writereg(state, 0x0c, 0xc3);
 	state->config->pll_set(fe, p);
@@ -276,7 +276,7 @@
 
 static int at76c651_set_defaults(struct dvb_frontend* fe)
 {
-	struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+	struct at76c651_state* state = fe->demodulator_priv;
 
 	at76c651_set_symbol_rate(state, 6900000);
 	at76c651_set_qam(state, QAM_64);
@@ -294,7 +294,7 @@
 
 static int at76c651_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+	struct at76c651_state* state = fe->demodulator_priv;
 	u8 sync;
 
 	/*
@@ -319,7 +319,7 @@
 
 static int at76c651_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+	struct at76c651_state* state = fe->demodulator_priv;
 
 	*ber = (at76c651_readreg(state, 0x81) & 0x0F) << 16;
 	*ber |= at76c651_readreg(state, 0x82) << 8;
@@ -331,7 +331,7 @@
 
 static int at76c651_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+	struct at76c651_state* state = fe->demodulator_priv;
 
 	u8 gain = ~at76c651_readreg(state, 0x91);
 	*strength = (gain << 8) | gain;
@@ -341,7 +341,7 @@
 
 static int at76c651_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+	struct at76c651_state* state = fe->demodulator_priv;
 
 	*snr = 0xFFFF -
 	    ((at76c651_readreg(state, 0x8F) << 8) |
@@ -352,7 +352,7 @@
 
 static int at76c651_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+	struct at76c651_state* state = fe->demodulator_priv;
 
 	*ucblocks = at76c651_readreg(state, 0x82);
 
@@ -369,7 +369,7 @@
 
 static void at76c651_release(struct dvb_frontend* fe)
 {
-	struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv;
+	struct at76c651_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -381,7 +381,7 @@
 	struct at76c651_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct at76c651_state*) kmalloc(sizeof(struct at76c651_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct at76c651_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index a212279..0c2ed44 100644
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -232,7 +232,7 @@
 
 static int cx22700_init (struct dvb_frontend* fe)
 
-{	struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+{	struct cx22700_state* state = fe->demodulator_priv;
 	int i;
 
 	dprintk("cx22700_init: init chip\n");
@@ -258,7 +258,7 @@
 
 static int cx22700_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+	struct cx22700_state* state = fe->demodulator_priv;
 
 	u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9)
 		   | (cx22700_readreg (state, 0x0e) << 1);
@@ -286,7 +286,7 @@
 
 static int cx22700_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+	struct cx22700_state* state = fe->demodulator_priv;
 
 	*ber = cx22700_readreg (state, 0x0c) & 0x7f;
 	cx22700_writereg (state, 0x0c, 0x00);
@@ -296,7 +296,7 @@
 
 static int cx22700_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
 {
-	struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+	struct cx22700_state* state = fe->demodulator_priv;
 
 	u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9)
 		   | (cx22700_readreg (state, 0x0e) << 1);
@@ -307,7 +307,7 @@
 
 static int cx22700_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+	struct cx22700_state* state = fe->demodulator_priv;
 
 	u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9)
 		   | (cx22700_readreg (state, 0x0e) << 1);
@@ -318,7 +318,7 @@
 
 static int cx22700_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+	struct cx22700_state* state = fe->demodulator_priv;
 
 	*ucblocks = cx22700_readreg (state, 0x0f);
 	cx22700_writereg (state, 0x0f, 0x00);
@@ -328,7 +328,7 @@
 
 static int cx22700_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+	struct cx22700_state* state = fe->demodulator_priv;
 
 	cx22700_writereg (state, 0x00, 0x02); /* XXX CHECKME: soft reset*/
 	cx22700_writereg (state, 0x00, 0x00);
@@ -346,7 +346,7 @@
 
 static int cx22700_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+	struct cx22700_state* state = fe->demodulator_priv;
 	u8 reg09 = cx22700_readreg (state, 0x09);
 
 	p->inversion = reg09 & 0x1 ? INVERSION_ON : INVERSION_OFF;
@@ -363,7 +363,7 @@
 
 static void cx22700_release(struct dvb_frontend* fe)
 {
-	struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv;
+	struct cx22700_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -375,7 +375,7 @@
 	struct cx22700_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct cx22700_state*) kmalloc(sizeof(struct cx22700_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct cx22700_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index 011860c..f4aa441 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -200,7 +200,7 @@
 static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
 	u8 val;
-	struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+	struct cx22702_state* state = fe->demodulator_priv;
 
 	/* set PLL */
         cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) &0xfe);
@@ -338,7 +338,7 @@
 static int cx22702_init (struct dvb_frontend* fe)
 {
 	int i;
-	struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+	struct cx22702_state* state = fe->demodulator_priv;
 
 	cx22702_writereg (state, 0x00, 0x02);
 
@@ -360,7 +360,7 @@
 
 static int cx22702_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+	struct cx22702_state* state = fe->demodulator_priv;
 	u8 reg0A;
 	u8 reg23;
 
@@ -389,7 +389,7 @@
 
 static int cx22702_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+	struct cx22702_state* state = fe->demodulator_priv;
 
 	if(cx22702_readreg (state, 0xE4) & 0x02) {
 		/* Realtime statistics */
@@ -406,7 +406,7 @@
 
 static int cx22702_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
 {
-	struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+	struct cx22702_state* state = fe->demodulator_priv;
 
 	*signal_strength = cx22702_readreg (state, 0x23);
 
@@ -415,7 +415,7 @@
 
 static int cx22702_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+	struct cx22702_state* state = fe->demodulator_priv;
 
 	u16 rs_ber=0;
 	if(cx22702_readreg (state, 0xE4) & 0x02) {
@@ -434,7 +434,7 @@
 
 static int cx22702_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+	struct cx22702_state* state = fe->demodulator_priv;
 
 	u8 _ucblocks;
 
@@ -449,7 +449,7 @@
 
 static int cx22702_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+	struct cx22702_state* state = fe->demodulator_priv;
 
 	u8 reg0C = cx22702_readreg (state, 0x0C);
 
@@ -459,7 +459,7 @@
 
 static void cx22702_release(struct dvb_frontend* fe)
 {
-	struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv;
+	struct cx22702_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -471,7 +471,7 @@
 	struct cx22702_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct cx22702_state*) kmalloc(sizeof(struct cx22702_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index ae16112..8222b88 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -315,7 +315,7 @@
 
 int cx24110_pll_write (struct dvb_frontend* fe, u32 data)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 
 /* tuner data is 21 bits long, must be left-aligned in data */
 /* tuner cx24108 is written through a dedicated 3wire interface on the demod chip */
@@ -356,7 +356,7 @@
 
 static int cx24110_initfe(struct dvb_frontend* fe)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 /* fixme (low): error handling */
         int i;
 
@@ -373,7 +373,7 @@
 
 static int cx24110_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 
 	switch (voltage) {
 	case SEC_VOLTAGE_13:
@@ -385,8 +385,7 @@
 	};
 }
 
-static int cx24110_diseqc_send_burst(struct dvb_frontend* fe,
-			fe_sec_mini_cmd_t burst)
+static int cx24110_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
 {
 	int rv, bit, i;
 	struct cx24110_state *state = fe->demodulator_priv;
@@ -413,7 +412,7 @@
 				   struct dvb_diseqc_master_cmd *cmd)
 {
 	int i, rv;
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 
 	for (i = 0; i < cmd->msg_len; i++)
 		cx24110_writereg(state, 0x79 + i, cmd->msg[i]);
@@ -432,7 +431,7 @@
 
 static int cx24110_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 
 	int sync = cx24110_readreg (state, 0x55);
 
@@ -460,7 +459,7 @@
 
 static int cx24110_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 
 	/* fixme (maybe): value range is 16 bit. Scale? */
 	if(cx24110_readreg(state,0x24)&0x10) {
@@ -478,7 +477,7 @@
 
 static int cx24110_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 
 /* no provision in hardware. Read the frontend AGC accumulator. No idea how to scale this, but I know it is 2s complement */
 	u8 signal = cx24110_readreg (state, 0x27)+128;
@@ -489,7 +488,7 @@
 
 static int cx24110_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 
 	/* no provision in hardware. Can be computed from the Es/N0 estimator, but I don't know how. */
 	if(cx24110_readreg(state,0x6a)&0x80) {
@@ -505,7 +504,7 @@
 
 static int cx24110_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 	u32 lastbyer;
 
 	if(cx24110_readreg(state,0x10)&0x40) {
@@ -527,7 +526,7 @@
 
 static int cx24110_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 
 	state->config->pll_set(fe, p);
 	cx24110_set_inversion (state, p->inversion);
@@ -540,7 +539,7 @@
 
 static int cx24110_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 	s32 afc; unsigned sclk;
 
 /* cannot read back tuner settings (freq). Need to have some private storage */
@@ -567,14 +566,14 @@
 
 static int cx24110_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 {
-	struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state *state = fe->demodulator_priv;
 
 	return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&~0x10)|(((tone==SEC_TONE_ON))?0x10:0));
 }
 
 static void cx24110_release(struct dvb_frontend* fe)
 {
-	struct cx24110_state* state = (struct cx24110_state*) fe->demodulator_priv;
+	struct cx24110_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -587,7 +586,7 @@
 	int ret;
 
 	/* allocate memory for the internal state */
-	state = (struct cx24110_state*) kmalloc(sizeof(struct cx24110_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct cx24110_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
index a853d12..6f52d64 100644
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ b/drivers/media/dvb/frontends/dib3000mb.c
@@ -56,12 +56,12 @@
 static int dib3000mb_set_frontend(struct dvb_frontend* fe,
 				  struct dvb_frontend_parameters *fep, int tuner)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 	struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
 	fe_code_rate_t fe_cr = FEC_NONE;
 	int search_state, seq;
 
-	if (tuner) {
+	if (tuner && state->config.pll_addr && state->config.pll_set) {
 		dib3000mb_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe));
 		state->config.pll_set(fe, fep, NULL);
 		dib3000mb_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe));
@@ -317,7 +317,7 @@
 
 static int dib3000mb_fe_init(struct dvb_frontend* fe, int mobile_mode)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 
 	deb_info("dib3000mb is getting up.\n");
 	wr(DIB3000MB_REG_POWER_CONTROL, DIB3000MB_POWER_UP);
@@ -401,7 +401,7 @@
 static int dib3000mb_get_frontend(struct dvb_frontend* fe,
 				  struct dvb_frontend_parameters *fep)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 	struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
 	fe_code_rate_t *cr;
 	u16 tps_val;
@@ -562,7 +562,7 @@
 
 static int dib3000mb_read_status(struct dvb_frontend* fe, fe_status_t *stat)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 
 	*stat = 0;
 
@@ -594,7 +594,7 @@
 
 static int dib3000mb_read_ber(struct dvb_frontend* fe, u32 *ber)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 
 	*ber = ((rd(DIB3000MB_REG_BER_MSB) << 16) | rd(DIB3000MB_REG_BER_LSB));
 	return 0;
@@ -603,7 +603,7 @@
 /* see dib3000-watch dvb-apps for exact calcuations of signal_strength and snr */
 static int dib3000mb_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 
 	*strength = rd(DIB3000MB_REG_SIGNAL_POWER) * 0xffff / 0x170;
 	return 0;
@@ -611,7 +611,7 @@
 
 static int dib3000mb_read_snr(struct dvb_frontend* fe, u16 *snr)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 	short sigpow = rd(DIB3000MB_REG_SIGNAL_POWER);
 	int icipow = ((rd(DIB3000MB_REG_NOISE_POWER_MSB) & 0xff) << 16) |
 		rd(DIB3000MB_REG_NOISE_POWER_LSB);
@@ -621,7 +621,7 @@
 
 static int dib3000mb_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 
 	*unc = rd(DIB3000MB_REG_UNC);
 	return 0;
@@ -629,7 +629,7 @@
 
 static int dib3000mb_sleep(struct dvb_frontend* fe)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 	deb_info("dib3000mb is going to bed.\n");
 	wr(DIB3000MB_REG_POWER_CONTROL, DIB3000MB_POWER_DOWN);
 	return 0;
@@ -656,7 +656,7 @@
 
 static void dib3000mb_release(struct dvb_frontend* fe)
 {
-	struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state *state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -671,7 +671,7 @@
 
 static int dib3000mb_fifo_control(struct dvb_frontend *fe, int onoff)
 {
-	struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state *state = fe->demodulator_priv;
 
 	deb_xfer("%s fifo\n",onoff ? "enabling" : "disabling");
 	if (onoff) {
@@ -692,7 +692,7 @@
 
 static int dib3000mb_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr)
 {
-	struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state *state = fe->demodulator_priv;
 	if (onoff) {
 		wr(DIB3000MB_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr));
 	} else {
@@ -709,7 +709,7 @@
 	struct dib3000_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct dib3000_state*) kmalloc(sizeof(struct dib3000_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct dib3000_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 	memset(state,0,sizeof(struct dib3000_state));
diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c
index 4a31c05..888f10a 100644
--- a/drivers/media/dvb/frontends/dib3000mc.c
+++ b/drivers/media/dvb/frontends/dib3000mc.c
@@ -297,7 +297,7 @@
 static int dib3000mc_get_frontend(struct dvb_frontend* fe,
 				  struct dvb_frontend_parameters *fep)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 	struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
 	fe_code_rate_t *cr;
 	u16 tps_val,cr_val;
@@ -458,12 +458,12 @@
 static int dib3000mc_set_frontend(struct dvb_frontend* fe,
 				  struct dvb_frontend_parameters *fep, int tuner)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 	struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
 	int search_state,auto_val;
 	u16 val;
 
-	if (tuner) { /* initial call from dvb */
+	if (tuner && state->config.pll_addr && state->config.pll_set) { /* initial call from dvb */
 		dib3000mc_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe));
 		state->config.pll_set(fe,fep,NULL);
 		dib3000mc_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe));
@@ -659,7 +659,7 @@
 }
 static int dib3000mc_read_status(struct dvb_frontend* fe, fe_status_t *stat)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 	u16 lock = rd(DIB3000MC_REG_LOCKING);
 
 	*stat = 0;
@@ -679,14 +679,14 @@
 
 static int dib3000mc_read_ber(struct dvb_frontend* fe, u32 *ber)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 	*ber = ((rd(DIB3000MC_REG_BER_MSB) << 16) | rd(DIB3000MC_REG_BER_LSB));
 	return 0;
 }
 
 static int dib3000mc_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 
 	*unc = rd(DIB3000MC_REG_PACKET_ERROR_COUNT);
 	return 0;
@@ -695,7 +695,7 @@
 /* see dib3000mb.c for calculation comments */
 static int dib3000mc_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 	u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB);
 	*strength = (((val >> 6) & 0xff) << 8) + (val & 0x3f);
 
@@ -706,7 +706,7 @@
 /* see dib3000mb.c for calculation comments */
 static int dib3000mc_read_snr(struct dvb_frontend* fe, u16 *snr)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 	u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB),
 		val2 = rd(DIB3000MC_REG_SIGNAL_NOISE_MSB);
 	u16 sig,noise;
@@ -726,7 +726,7 @@
 
 static int dib3000mc_sleep(struct dvb_frontend* fe)
 {
-	struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state* state = fe->demodulator_priv;
 
 	set_or(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_PWR_DOWN);
 	wr(DIB3000MC_REG_CLK_CFG_1,DIB3000MC_CLK_CFG_1_POWER_DOWN);
@@ -756,7 +756,7 @@
 
 static void dib3000mc_release(struct dvb_frontend* fe)
 {
-	struct dib3000_state *state = (struct dib3000_state *) fe->demodulator_priv;
+	struct dib3000_state *state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -771,7 +771,7 @@
 
 static int dib3000mc_fifo_control(struct dvb_frontend *fe, int onoff)
 {
-	struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state *state = fe->demodulator_priv;
 	u16 tmp = rd(DIB3000MC_REG_SMO_MODE);
 
 	deb_xfer("%s fifo\n",onoff ? "enabling" : "disabling");
@@ -803,7 +803,7 @@
 
 static int dib3000mc_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr)
 {
-	struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv;
+	struct dib3000_state *state = fe->demodulator_priv;
 	if (onoff) {
 		wr(DIB3000MC_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr));
 	} else {
@@ -844,7 +844,7 @@
 	u16 devid;
 
 	/* allocate memory for the internal state */
-	state = (struct dib3000_state*) kmalloc(sizeof(struct dib3000_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct dib3000_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 	memset(state,0,sizeof(struct dib3000_state));
diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h
index 016c794..c4c3c56 100644
--- a/drivers/media/dvb/frontends/dvb-pll.h
+++ b/drivers/media/dvb/frontends/dvb-pll.h
@@ -2,6 +2,9 @@
  * $Id: dvb-pll.h,v 1.2 2005/02/10 11:43:41 kraxel Exp $
  */
 
+#ifndef __DVB_PLL_H__
+#define __DVB_PLL_H__
+
 struct dvb_pll_desc {
 	char *name;
 	u32  min;
@@ -26,9 +29,4 @@
 int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
 		      u32 freq, int bandwidth);
 
-/*
- * Local variables:
- * c-basic-offset: 8
- * compile-command: "make DVB=1"
- * End:
- */
+#endif
diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c
index c05a9b0..cff93b9 100644
--- a/drivers/media/dvb/frontends/dvb_dummy_fe.c
+++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c
@@ -100,7 +100,7 @@
 
 static void dvb_dummy_fe_release(struct dvb_frontend* fe)
 {
-	struct dvb_dummy_fe_state* state = (struct dvb_dummy_fe_state*) fe->demodulator_priv;
+	struct dvb_dummy_fe_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -111,7 +111,7 @@
 	struct dvb_dummy_fe_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct dvb_dummy_fe_state*) kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
@@ -134,7 +134,7 @@
 	struct dvb_dummy_fe_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct dvb_dummy_fe_state*) kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
@@ -157,7 +157,7 @@
 	struct dvb_dummy_fe_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct dvb_dummy_fe_state*) kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index 9ac95de..031a1dd 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -121,7 +121,7 @@
 
 static int apply_frontend_param (struct dvb_frontend* fe, struct dvb_frontend_parameters *param)
 {
-	struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+	struct l64781_state* state = fe->demodulator_priv;
 	/* The coderates for FEC_NONE, FEC_4_5 and FEC_FEC_6_7 are arbitrary */
 	static const u8 fec_tab[] = { 7, 0, 1, 2, 9, 3, 10, 4 };
 	/* QPSK, QAM_16, QAM_64 */
@@ -234,7 +234,7 @@
 
 static int get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters* param)
 {
-	struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+	struct l64781_state* state = fe->demodulator_priv;
 	int tmp;
 
 
@@ -352,7 +352,7 @@
 
 static int l64781_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+	struct l64781_state* state = fe->demodulator_priv;
 	int sync = l64781_readreg (state, 0x32);
 	int gain = l64781_readreg (state, 0x0e);
 
@@ -381,7 +381,7 @@
 
 static int l64781_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+	struct l64781_state* state = fe->demodulator_priv;
 
 	/*   XXX FIXME: set up counting period (reg 0x26...0x28)
 	 */
@@ -393,7 +393,7 @@
 
 static int l64781_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
 {
-	struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+	struct l64781_state* state = fe->demodulator_priv;
 
 	u8 gain = l64781_readreg (state, 0x0e);
 	*signal_strength = (gain << 8) | gain;
@@ -403,7 +403,7 @@
 
 static int l64781_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+	struct l64781_state* state = fe->demodulator_priv;
 
 	u8 avg_quality = 0xff - l64781_readreg (state, 0x33);
 	*snr = (avg_quality << 8) | avg_quality; /* not exact, but...*/
@@ -413,7 +413,7 @@
 
 static int l64781_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+	struct l64781_state* state = fe->demodulator_priv;
 
 	*ucblocks = l64781_readreg (state, 0x37)
 	   | (l64781_readreg (state, 0x38) << 8);
@@ -423,7 +423,7 @@
 
 static int l64781_sleep(struct dvb_frontend* fe)
 {
-	struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+	struct l64781_state* state = fe->demodulator_priv;
 
 	/* Power down */
 	return l64781_writereg (state, 0x3e, 0x5a);
@@ -431,7 +431,7 @@
 
 static int l64781_init(struct dvb_frontend* fe)
 {
-	struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+	struct l64781_state* state = fe->demodulator_priv;
 
         reset_and_configure (state);
 
@@ -484,7 +484,7 @@
 
 static void l64781_release(struct dvb_frontend* fe)
 {
-	struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv;
+	struct l64781_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -501,7 +501,7 @@
 			   { .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
 
 	/* allocate memory for the internal state */
-	state = (struct l64781_state*) kmalloc(sizeof(struct l64781_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct l64781_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 176a22e..e455aec 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -226,7 +226,7 @@
 
 static int mt312_initfe(struct dvb_frontend* fe)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	int ret;
 	u8 buf[2];
 
@@ -287,7 +287,7 @@
 static int mt312_send_master_cmd(struct dvb_frontend* fe,
 				 struct dvb_diseqc_master_cmd *c)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	int ret;
 	u8 diseqc_mode;
 
@@ -318,7 +318,7 @@
 
 static int mt312_send_burst(struct dvb_frontend* fe, const fe_sec_mini_cmd_t c)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	const u8 mini_tab[2] = { 0x02, 0x03 };
 
 	int ret;
@@ -340,7 +340,7 @@
 
 static int mt312_set_tone(struct dvb_frontend* fe, const fe_sec_tone_mode_t t)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	const u8 tone_tab[2] = { 0x01, 0x00 };
 
 	int ret;
@@ -362,7 +362,7 @@
 
 static int mt312_set_voltage(struct dvb_frontend* fe, const fe_sec_voltage_t v)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	const u8 volt_tab[3] = { 0x00, 0x40, 0x00 };
 
 	if (v > SEC_VOLTAGE_OFF)
@@ -373,7 +373,7 @@
 
 static int mt312_read_status(struct dvb_frontend* fe, fe_status_t *s)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	int ret;
 	u8 status[3];
 
@@ -400,7 +400,7 @@
 
 static int mt312_read_ber(struct dvb_frontend* fe, u32 *ber)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	int ret;
 	u8 buf[3];
 
@@ -414,7 +414,7 @@
 
 static int mt312_read_signal_strength(struct dvb_frontend* fe, u16 *signal_strength)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	int ret;
 	u8 buf[3];
 	u16 agc;
@@ -435,7 +435,7 @@
 
 static int mt312_read_snr(struct dvb_frontend* fe, u16 *snr)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	int ret;
 	u8 buf[2];
 
@@ -449,7 +449,7 @@
 
 static int mt312_read_ucblocks(struct dvb_frontend* fe, u32 *ubc)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	int ret;
 	u8 buf[2];
 
@@ -464,7 +464,7 @@
 static int mt312_set_frontend(struct dvb_frontend* fe,
 			      struct dvb_frontend_parameters *p)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	int ret;
 	u8 buf[5], config_val;
 	u16 sr;
@@ -560,7 +560,7 @@
 static int mt312_get_frontend(struct dvb_frontend* fe,
 			      struct dvb_frontend_parameters *p)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	int ret;
 
 	if ((ret = mt312_get_inversion(state, &p->inversion)) < 0)
@@ -577,7 +577,7 @@
 
 static int mt312_sleep(struct dvb_frontend* fe)
 {
-	struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state *state = fe->demodulator_priv;
 	int ret;
 	u8 config;
 
@@ -605,7 +605,7 @@
 
 static void mt312_release(struct dvb_frontend* fe)
 {
-	struct mt312_state* state = (struct mt312_state*) fe->demodulator_priv;
+	struct mt312_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -617,7 +617,7 @@
 	struct mt312_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct mt312_state*) kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
@@ -651,7 +651,7 @@
 	struct mt312_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct mt312_state*) kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/mt352.c b/drivers/media/dvb/frontends/mt352.c
index 50326c7..d32dc4d 100644
--- a/drivers/media/dvb/frontends/mt352.c
+++ b/drivers/media/dvb/frontends/mt352.c
@@ -46,7 +46,7 @@
 	struct dvb_frontend_ops ops;
 
 	/* configuration settings */
-	const struct mt352_config* config;
+	struct mt352_config config;
 };
 
 static int debug;
@@ -59,7 +59,7 @@
 {
 	struct mt352_state* state = fe->demodulator_priv;
 	u8 buf[2] = { reg, val };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0,
+	struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0,
 			       .buf = buf, .len = 2 };
 	int err = i2c_transfer(state->i2c, &msg, 1);
 	if (err != 1) {
@@ -84,10 +84,10 @@
 	int ret;
 	u8 b0 [] = { reg };
 	u8 b1 [] = { 0 };
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address,
+	struct i2c_msg msg [] = { { .addr = state->config.demod_address,
 				    .flags = 0,
 				    .buf = b0, .len = 1 },
-				  { .addr = state->config->demod_address,
+				  { .addr = state->config.demod_address,
 				    .flags = I2C_M_RD,
 				    .buf = b1, .len = 1 } };
 
@@ -102,11 +102,6 @@
 	return b1[0];
 }
 
-int mt352_read(struct dvb_frontend *fe, u8 reg)
-{
-	return mt352_read_register(fe->demodulator_priv,reg);
-}
-
 static int mt352_sleep(struct dvb_frontend* fe)
 {
 	static u8 mt352_softdown[] = { CLOCK_CTL, 0x20, 0x08 };
@@ -134,8 +129,8 @@
 		bw = 8;
 		break;
 	}
-	if (state->config->adc_clock)
-		adc_clock = state->config->adc_clock;
+	if (state->config.adc_clock)
+		adc_clock = state->config.adc_clock;
 
 	value = 64 * bw * (1<<16) / (7 * 8);
 	value = value * 1000 / adc_clock;
@@ -152,10 +147,10 @@
 	int if2       = 36167; /* 36.166667 MHz */
 	int ife,value;
 
-	if (state->config->adc_clock)
-		adc_clock = state->config->adc_clock;
-	if (state->config->if2)
-		if2 = state->config->if2;
+	if (state->config.adc_clock)
+		adc_clock = state->config.adc_clock;
+	if (state->config.if2)
+		if2 = state->config.if2;
 
 	ife = (2*adc_clock - if2);
 	value = -16374 * ife / adc_clock;
@@ -289,10 +284,10 @@
 
 	mt352_calc_nominal_rate(state, op->bandwidth, buf+4);
 	mt352_calc_input_freq(state, buf+6);
-	state->config->pll_set(fe, param, buf+8);
+	state->config.pll_set(fe, param, buf+8);
 
 	mt352_write(fe, buf, sizeof(buf));
-	if (state->config->no_tuner) {
+	if (state->config.no_tuner) {
 		/* start decoding */
 		mt352_write(fe, fsm_go, 2);
 	} else {
@@ -516,7 +511,7 @@
 
 		/* Do a "hard" reset */
 		mt352_write(fe, mt352_reset_attach, sizeof(mt352_reset_attach));
-		return state->config->demod_init(fe);
+		return state->config.demod_init(fe);
 	}
 
 	return 0;
@@ -541,8 +536,8 @@
 	memset(state,0,sizeof(*state));
 
 	/* setup the state */
-	state->config = config;
 	state->i2c = i2c;
+	memcpy(&state->config,config,sizeof(struct mt352_config));
 	memcpy(&state->ops, &mt352_ops, sizeof(struct dvb_frontend_ops));
 
 	/* check if the demod is there */
@@ -601,10 +596,3 @@
 
 EXPORT_SYMBOL(mt352_attach);
 EXPORT_SYMBOL(mt352_write);
-EXPORT_SYMBOL(mt352_read);
-/*
- * Local variables:
- * c-basic-offset: 8
- * compile-command: "make DVB=1"
- * End:
- */
diff --git a/drivers/media/dvb/frontends/mt352.h b/drivers/media/dvb/frontends/mt352.h
index f5d8a5a..03040cd 100644
--- a/drivers/media/dvb/frontends/mt352.h
+++ b/drivers/media/dvb/frontends/mt352.h
@@ -61,12 +61,5 @@
 					 struct i2c_adapter* i2c);
 
 extern int mt352_write(struct dvb_frontend* fe, u8* ibuf, int ilen);
-extern int mt352_read(struct dvb_frontend *fe, u8 reg);
 
 #endif // MT352_H
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
index 4743aa1..35a1d60 100644
--- a/drivers/media/dvb/frontends/nxt2002.c
+++ b/drivers/media/dvb/frontends/nxt2002.c
@@ -241,7 +241,7 @@
 static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
 {
 
-	struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+	struct nxt2002_state* state = fe->demodulator_priv;
 	u8 buf[256],written = 0,chunkpos = 0;
 	u16 rambase,position,crc = 0;
 
@@ -309,7 +309,7 @@
 static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe,
 					     struct dvb_frontend_parameters *p)
 {
-	struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+	struct nxt2002_state* state = fe->demodulator_priv;
 	u32 freq = 0;
 	u16 tunerfreq = 0;
 	u8 buf[4];
@@ -343,8 +343,6 @@
 	/* reset the agc now that tuning has been completed */
 	nxt2002_agc_reset(state);
 
-
-
 	/* set target power level */
 	switch (p->u.vsb.modulation) {
 		case QAM_64:
@@ -453,7 +451,7 @@
 
 static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+	struct nxt2002_state* state = fe->demodulator_priv;
 	u8 lock;
 	i2c_readbytes(state,0x31,&lock,1);
 
@@ -470,7 +468,7 @@
 
 static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+	struct nxt2002_state* state = fe->demodulator_priv;
 	u8 b[3];
 
 	nxt2002_readreg_multibyte(state,0xE6,b,3);
@@ -482,7 +480,7 @@
 
 static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+	struct nxt2002_state* state = fe->demodulator_priv;
 	u8 b[2];
 	u16 temp = 0;
 
@@ -502,7 +500,7 @@
 static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr)
 {
 
-	struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+	struct nxt2002_state* state = fe->demodulator_priv;
 	u8 b[2];
 	u16 temp = 0, temp2;
 	u32 snrdb = 0;
@@ -536,7 +534,7 @@
 
 static int nxt2002_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+	struct nxt2002_state* state = fe->demodulator_priv;
 	u8 b[3];
 
 	nxt2002_readreg_multibyte(state,0xE6,b,3);
@@ -552,7 +550,7 @@
 
 static int nxt2002_init(struct dvb_frontend* fe)
 {
-	struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+	struct nxt2002_state* state = fe->demodulator_priv;
 	const struct firmware *fw;
 	int ret;
 	u8 buf[2];
@@ -624,7 +622,7 @@
 
 static void nxt2002_release(struct dvb_frontend* fe)
 {
-	struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv;
+	struct nxt2002_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -637,7 +635,7 @@
 	u8 buf [] = {0,0,0,0,0};
 
 	/* allocate memory for the internal state */
-	state = (struct nxt2002_state*) kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
index a41f7da..966de98 100644
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ b/drivers/media/dvb/frontends/nxt6000.c
@@ -176,11 +176,16 @@
 
 static void nxt6000_setup(struct dvb_frontend* fe)
 {
-	struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv;
+	struct nxt6000_state* state = fe->demodulator_priv;
 
 	nxt6000_writereg(state, RS_COR_SYNC_PARAM, SYNC_PARAM);
 	nxt6000_writereg(state, BER_CTRL, /*(1 << 2) | */ (0x01 << 1) | 0x01);
-	nxt6000_writereg(state, VIT_COR_CTL, VIT_COR_RESYNC);
+	nxt6000_writereg(state, VIT_BERTIME_2, 0x00);  // BER Timer = 0x000200 * 256 = 131072 bits
+	nxt6000_writereg(state, VIT_BERTIME_1, 0x02);  //
+	nxt6000_writereg(state, VIT_BERTIME_0, 0x00);  //
+	nxt6000_writereg(state, VIT_COR_INTEN, 0x98); // Enable BER interrupts
+	nxt6000_writereg(state, VIT_COR_CTL, 0x82);   // Enable BER measurement
+	nxt6000_writereg(state, VIT_COR_CTL, VIT_COR_RESYNC | 0x02 );
 	nxt6000_writereg(state, OFDM_COR_CTL, (0x01 << 5) | (nxt6000_readreg(state, OFDM_COR_CTL) & 0x0F));
 	nxt6000_writereg(state, OFDM_COR_MODEGUARD, FORCEMODE8K | 0x02);
 	nxt6000_writereg(state, OFDM_AGC_CTL, AGCLAST | INITIAL_AGC_BW);
@@ -422,7 +427,7 @@
 static int nxt6000_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
 	u8 core_status;
-	struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv;
+	struct nxt6000_state* state = fe->demodulator_priv;
 
 	*status = 0;
 
@@ -451,7 +456,7 @@
 
 static int nxt6000_init(struct dvb_frontend* fe)
 {
-	struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv;
+	struct nxt6000_state* state = fe->demodulator_priv;
 
 	nxt6000_reset(state);
 	nxt6000_setup(fe);
@@ -461,7 +466,7 @@
 
 static int nxt6000_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *param)
 {
-	struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv;
+	struct nxt6000_state* state = fe->demodulator_priv;
 	int result;
 
 	nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x01);	/* open i2c bus switch */
@@ -482,10 +487,44 @@
 
 static void nxt6000_release(struct dvb_frontend* fe)
 {
-	struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv;
+	struct nxt6000_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
+static int nxt6000_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+	struct nxt6000_state* state = fe->demodulator_priv;
+
+	*snr = nxt6000_readreg( state, OFDM_CHC_SNR) / 8;
+
+	return 0;
+}
+
+static int nxt6000_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+	struct nxt6000_state* state = fe->demodulator_priv;
+
+	nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18 );
+
+	*ber = (nxt6000_readreg( state, VIT_BER_1 ) << 8 ) |
+		nxt6000_readreg( state, VIT_BER_0 );
+
+	nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18); // Clear BER Done interrupts
+
+	return 0;
+}
+
+static int nxt6000_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
+{
+	struct nxt6000_state* state = fe->demodulator_priv;
+
+	*signal_strength = (short) (511 -
+		(nxt6000_readreg(state, AGC_GAIN_1) +
+		((nxt6000_readreg(state, AGC_GAIN_2) & 0x03) << 8)));
+
+	return 0;
+}
+
 static struct dvb_frontend_ops nxt6000_ops;
 
 struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
@@ -494,7 +533,7 @@
 	struct nxt6000_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct nxt6000_state*) kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
@@ -542,6 +581,9 @@
 	.set_frontend = nxt6000_set_frontend,
 
 	.read_status = nxt6000_read_status,
+	.read_ber = nxt6000_read_ber,
+	.read_signal_strength = nxt6000_read_signal_strength,
+	.read_snr = nxt6000_read_snr,
 };
 
 module_param(debug, int, 0644);
diff --git a/drivers/media/dvb/frontends/nxt6000_priv.h b/drivers/media/dvb/frontends/nxt6000_priv.h
index 64b1a89..0422e58 100644
--- a/drivers/media/dvb/frontends/nxt6000_priv.h
+++ b/drivers/media/dvb/frontends/nxt6000_priv.h
@@ -65,12 +65,27 @@
 #define BER_DONE               (0x08)
 #define BER_OVERFLOW           (0x10)
 
+/* 0x38 VIT_BERTIME_2 */
+#define VIT_BERTIME_2      (0x38)
+
+/* 0x39 VIT_BERTIME_1 */
+#define VIT_BERTIME_1      (0x39)
+
+/* 0x3A VIT_BERTIME_0 */
+#define VIT_BERTIME_0      (0x3a)
+
 			     /* 0x38 OFDM_BERTimer *//* Use the alias registers */
 #define A_VIT_BER_TIMER_0      (0x1D)
 
 			     /* 0x3A VIT_BER_TIMER_0 *//* Use the alias registers */
 #define A_VIT_BER_0            (0x1B)
 
+/* 0x3B VIT_BER_1 */
+#define VIT_BER_1              (0x3b)
+
+/* 0x3C VIT_BER_0 */
+#define VIT_BER_0              (0x3c)
+
 /* 0x40 OFDM_COR_CTL */
 #define OFDM_COR_CTL           (0x40)
 #define COREACT                (0x20)
@@ -117,6 +132,12 @@
 #define OFDM_ITB_CTL           (0x4B)
 #define ITBINV                 (0x01)
 
+/* 0x49 AGC_GAIN_1 */
+#define AGC_GAIN_1             (0x49)
+
+/* 0x4A AGC_GAIN_2 */
+#define AGC_GAIN_2             (0x4A)
+
 /* 0x4C OFDM_ITB_FREQ_1 */
 #define OFDM_ITB_FREQ_1        (0x4C)
 
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index df5dee7..cc0a77c 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -102,7 +102,7 @@
 
 static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
 {
-	struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+	struct or51132_state* state = fe->demodulator_priv;
 	static u8 run_buf[] = {0x7F,0x01};
 	static u8 get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00};
 	u8 rec_buf[14];
@@ -240,7 +240,7 @@
 
 static int or51132_setmode(struct dvb_frontend* fe)
 {
-	struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+	struct or51132_state* state = fe->demodulator_priv;
 	unsigned char cmd_buf[4];
 
 	dprintk("setmode %d\n",(int)state->current_modulation);
@@ -316,7 +316,7 @@
 {
 	int ret;
 	u8 buf[4];
-	struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+	struct or51132_state* state = fe->demodulator_priv;
 	const struct firmware *fw;
 
 	/* Change only if we are actually changing the modulation */
@@ -391,7 +391,7 @@
 
 static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+	struct or51132_state* state = fe->demodulator_priv;
 	unsigned char rec_buf[2];
 	unsigned char snd_buf[2];
 	*status = 0;
@@ -464,7 +464,7 @@
 
 static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+	struct or51132_state* state = fe->demodulator_priv;
 	unsigned char rec_buf[2];
 	unsigned char snd_buf[2];
 	u8 rcvr_stat;
@@ -512,7 +512,7 @@
 
 static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+	struct or51132_state* state = fe->demodulator_priv;
 	unsigned char rec_buf[2];
 	unsigned char snd_buf[2];
 	u16 snr_equ;
@@ -549,7 +549,7 @@
 
 static void or51132_release(struct dvb_frontend* fe)
 {
-	struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+	struct or51132_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
index 58ad34e..764a95a 100644
--- a/drivers/media/dvb/frontends/sp8870.c
+++ b/drivers/media/dvb/frontends/sp8870.c
@@ -248,7 +248,7 @@
 static int sp8870_set_frontend_parameters (struct dvb_frontend* fe,
 					   struct dvb_frontend_parameters *p)
 {
-	struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+	struct sp8870_state* state = fe->demodulator_priv;
 	int  err;
 	u16 reg0xc05;
 
@@ -302,7 +302,7 @@
 
 static int sp8870_init (struct dvb_frontend* fe)
 {
-	struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+	struct sp8870_state* state = fe->demodulator_priv;
         const struct firmware *fw = NULL;
 
 	sp8870_wake_up(state);
@@ -358,7 +358,7 @@
 
 static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status)
 {
-	struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+	struct sp8870_state* state = fe->demodulator_priv;
 	int status;
 	int signal;
 
@@ -384,7 +384,7 @@
 
 static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber)
 {
-	struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+	struct sp8870_state* state = fe->demodulator_priv;
 	int ret;
 	u32 tmp;
 
@@ -412,7 +412,7 @@
 
 static int sp8870_read_signal_strength(struct dvb_frontend* fe,  u16 * signal)
 {
-	struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+	struct sp8870_state* state = fe->demodulator_priv;
 	int ret;
 	u16 tmp;
 
@@ -438,7 +438,7 @@
 
 static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks)
 {
-	struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+	struct sp8870_state* state = fe->demodulator_priv;
 	int ret;
 
 	*ublocks = 0;
@@ -467,7 +467,7 @@
 
 static int sp8870_set_frontend (struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+	struct sp8870_state* state = fe->demodulator_priv;
 
 	/*
 	    The firmware of the sp8870 sometimes locks up after setting frontend parameters.
@@ -524,7 +524,7 @@
 
 static int sp8870_sleep(struct dvb_frontend* fe)
 {
-	struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+	struct sp8870_state* state = fe->demodulator_priv;
 
 	// tristate TS output and disable interface pins
 	return sp8870_writereg(state, 0xC18, 0x000);
@@ -540,7 +540,7 @@
 
 static void sp8870_release(struct dvb_frontend* fe)
 {
-	struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv;
+	struct sp8870_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -552,7 +552,7 @@
 	struct sp8870_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct sp8870_state*) kmalloc(sizeof(struct sp8870_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct sp8870_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
index 7eae833..d868a69 100644
--- a/drivers/media/dvb/frontends/sp887x.c
+++ b/drivers/media/dvb/frontends/sp887x.c
@@ -135,7 +135,7 @@
  */
 static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw)
 {
-	struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+	struct sp887x_state* state = fe->demodulator_priv;
 	u8 buf [BLOCKSIZE+2];
 	int i;
 	int fw_size = fw->size;
@@ -344,7 +344,7 @@
 static int sp887x_setup_frontend_parameters (struct dvb_frontend* fe,
 					     struct dvb_frontend_parameters *p)
 {
-	struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+	struct sp887x_state* state = fe->demodulator_priv;
 	int actual_freq, err;
 	u16 val, reg0xc05;
 
@@ -405,7 +405,7 @@
 
 static int sp887x_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+	struct sp887x_state* state = fe->demodulator_priv;
 	u16 snr12 = sp887x_readreg(state, 0xf16);
 	u16 sync0x200 = sp887x_readreg(state, 0x200);
 	u16 sync0xf17 = sp887x_readreg(state, 0xf17);
@@ -439,7 +439,7 @@
 
 static int sp887x_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+	struct sp887x_state* state = fe->demodulator_priv;
 
 	*ber = (sp887x_readreg(state, 0xc08) & 0x3f) |
 	       (sp887x_readreg(state, 0xc07) << 6);
@@ -453,7 +453,7 @@
 
 static int sp887x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+	struct sp887x_state* state = fe->demodulator_priv;
 
 	u16 snr12 = sp887x_readreg(state, 0xf16);
 	u32 signal = 3 * (snr12 << 4);
@@ -464,7 +464,7 @@
 
 static int sp887x_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+	struct sp887x_state* state = fe->demodulator_priv;
 
 	u16 snr12 = sp887x_readreg(state, 0xf16);
 	*snr = (snr12 << 4) | (snr12 >> 8);
@@ -474,7 +474,7 @@
 
 static int sp887x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+	struct sp887x_state* state = fe->demodulator_priv;
 
 	*ucblocks = sp887x_readreg(state, 0xc0c);
 	if (*ucblocks == 0xfff)
@@ -485,7 +485,7 @@
 
 static int sp887x_sleep(struct dvb_frontend* fe)
 {
-	struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+	struct sp887x_state* state = fe->demodulator_priv;
 
 	/* tristate TS output and disable interface pins */
 	sp887x_writereg(state, 0xc18, 0x000);
@@ -495,7 +495,7 @@
 
 static int sp887x_init(struct dvb_frontend* fe)
 {
-	struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+	struct sp887x_state* state = fe->demodulator_priv;
         const struct firmware *fw = NULL;
 	int ret;
 
@@ -534,7 +534,7 @@
 
 static void sp887x_release(struct dvb_frontend* fe)
 {
-	struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv;
+	struct sp887x_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -546,7 +546,7 @@
 	struct sp887x_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct sp887x_state*) kmalloc(sizeof(struct sp887x_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct sp887x_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 502c640..e681263 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -365,7 +365,7 @@
 
 int stv0297_enable_plli2c(struct dvb_frontend *fe)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 
 	stv0297_writereg(state, 0x87, 0x78);
 	stv0297_writereg(state, 0x86, 0xc8);
@@ -375,7 +375,7 @@
 
 static int stv0297_init(struct dvb_frontend *fe)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 	int i;
 
 	/* soft reset */
@@ -416,7 +416,7 @@
 
 static int stv0297_sleep(struct dvb_frontend *fe)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 
 	stv0297_writereg_mask(state, 0x80, 1, 1);
 
@@ -425,7 +425,7 @@
 
 static int stv0297_read_status(struct dvb_frontend *fe, fe_status_t * status)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 
 	u8 sync = stv0297_readreg(state, 0xDF);
 
@@ -438,7 +438,7 @@
 
 static int stv0297_read_ber(struct dvb_frontend *fe, u32 * ber)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 	u8 BER[3];
 
 	stv0297_writereg(state, 0xA0, 0x80);	// Start Counting bit errors for 4096 Bytes
@@ -453,7 +453,7 @@
 
 static int stv0297_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 	u8 STRENGTH[2];
 
 	stv0297_readregs(state, 0x41, STRENGTH, 2);
@@ -464,7 +464,7 @@
 
 static int stv0297_read_snr(struct dvb_frontend *fe, u16 * snr)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 	u8 SNR[2];
 
 	stv0297_readregs(state, 0x07, SNR, 2);
@@ -475,7 +475,7 @@
 
 static int stv0297_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 
 	*ucblocks = (stv0297_readreg(state, 0xD5) << 8)
 		| stv0297_readreg(state, 0xD4);
@@ -485,7 +485,7 @@
 
 static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 	int u_threshold;
 	int initial_u;
 	int blind_u;
@@ -689,7 +689,7 @@
 
 static int stv0297_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 	int reg_00, reg_83;
 
 	reg_00 = stv0297_readreg(state, 0x00);
@@ -725,7 +725,7 @@
 
 static void stv0297_release(struct dvb_frontend *fe)
 {
-	struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv;
+	struct stv0297_state *state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -737,7 +737,7 @@
 	struct stv0297_state *state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct stv0297_state *) kmalloc(sizeof(struct stv0297_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct stv0297_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index 15b4054..cfa3928 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -70,6 +70,7 @@
 #define STATUS_UCBLOCKS 1
 
 static int debug;
+static int debug_legacy_dish_switch;
 #define dprintk(args...) \
 	do { \
 		if (debug) printk(KERN_DEBUG "stv0299: " args); \
@@ -93,7 +94,7 @@
 
 int stv0299_writereg (struct dvb_frontend* fe, u8 reg, u8 data)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
 	return stv0299_writeregI(state, reg, data);
 }
@@ -218,7 +219,7 @@
 
 static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 	u64 big = srate;
 	u32 ratio;
 
@@ -269,7 +270,7 @@
 static int stv0299_send_diseqc_msg (struct dvb_frontend* fe,
 				    struct dvb_diseqc_master_cmd *m)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 	u8 val;
 	int i;
 
@@ -299,7 +300,7 @@
 
 static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 	u8 val;
 
 	dprintk ("%s\n", __FUNCTION__);
@@ -326,7 +327,7 @@
 
 static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 	u8 val;
 
 	if (stv0299_wait_diseqc_idle (state, 100) < 0)
@@ -348,7 +349,7 @@
 
 static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 	u8 reg0x08;
 	u8 reg0x0c;
 
@@ -385,34 +386,84 @@
 	};
 }
 
-static int stv0299_send_legacy_dish_cmd(struct dvb_frontend* fe, u32 cmd)
+static inline s32 stv0299_calc_usec_delay (struct timeval lasttime, struct timeval curtime)
 {
+	return ((curtime.tv_usec < lasttime.tv_usec) ?
+		1000000 - lasttime.tv_usec + curtime.tv_usec :
+		curtime.tv_usec - lasttime.tv_usec);
+}
+
+static void stv0299_sleep_until (struct timeval *waketime, u32 add_usec)
+{
+	struct timeval lasttime;
+	s32 delta, newdelta;
+
+	waketime->tv_usec += add_usec;
+	if (waketime->tv_usec >= 1000000) {
+		waketime->tv_usec -= 1000000;
+		waketime->tv_sec++;
+	}
+
+	do_gettimeofday (&lasttime);
+	delta = stv0299_calc_usec_delay (lasttime, *waketime);
+	if (delta > 2500) {
+		msleep ((delta - 1500) / 1000);
+		do_gettimeofday (&lasttime);
+		newdelta = stv0299_calc_usec_delay (lasttime, *waketime);
+		delta = (newdelta > delta) ? 0 : newdelta;
+	}
+	if (delta > 0)
+		udelay (delta);
+}
+
+static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd)
+{
+	struct stv0299_state* state = fe->demodulator_priv;
+	u8 reg0x08;
+	u8 reg0x0c;
+	u8 lv_mask = 0x40;
 	u8 last = 1;
 	int i;
+	struct timeval nexttime;
+	struct timeval tv[10];
 
-	/* reset voltage at the end
-	if((0x50 & stv0299_readreg (i2c, 0x0c)) == 0x50)
-		cmd |= 0x80;
-	else
-		cmd &= 0x7F;
-	*/
+	reg0x08 = stv0299_readreg (state, 0x08);
+	reg0x0c = stv0299_readreg (state, 0x0c);
+	reg0x0c &= 0x0f;
+	stv0299_writeregI (state, 0x08, (reg0x08 & 0x3f) | (state->config->lock_output << 6));
+	if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0)
+		lv_mask = 0x10;
 
 	cmd = cmd << 1;
-	dprintk("%s switch command: 0x%04x\n",__FUNCTION__, cmd);
+	if (debug_legacy_dish_switch)
+		printk ("%s switch command: 0x%04x\n",__FUNCTION__, cmd);
 
-	stv0299_set_voltage(fe,SEC_VOLTAGE_18);
-	msleep(32);
+	do_gettimeofday (&nexttime);
+	if (debug_legacy_dish_switch)
+		memcpy (&tv[0], &nexttime, sizeof (struct timeval));
+	stv0299_writeregI (state, 0x0c, reg0x0c | 0x50); /* set LNB to 18V */
+
+	stv0299_sleep_until (&nexttime, 32000);
 
 	for (i=0; i<9; i++) {
+		if (debug_legacy_dish_switch)
+			do_gettimeofday (&tv[i+1]);
 		if((cmd & 0x01) != last) {
-			stv0299_set_voltage(fe, last ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
+			/* set voltage to (last ? 13V : 18V) */
+			stv0299_writeregI (state, 0x0c, reg0x0c | (last ? lv_mask : 0x50));
 			last = (last) ? 0 : 1;
 		}
 
 		cmd = cmd >> 1;
 
 		if (i != 8)
-			msleep(8);
+			stv0299_sleep_until (&nexttime, 8000);
+	}
+	if (debug_legacy_dish_switch) {
+		printk ("%s(%d): switch delay (should be 32k followed by all 8k\n",
+			__FUNCTION__, fe->dvb->num);
+		for (i=1; i < 10; i++)
+			printk ("%d: %d\n", i, stv0299_calc_usec_delay (tv[i-1] , tv[i]));
 	}
 
 	return 0;
@@ -420,7 +471,7 @@
 
 static int stv0299_init (struct dvb_frontend* fe)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 	int i;
 
 	dprintk("stv0299: init chip\n");
@@ -439,7 +490,7 @@
 
 static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
 	u8 signal = 0xff - stv0299_readreg (state, 0x18);
 	u8 sync = stv0299_readreg (state, 0x1b);
@@ -467,7 +518,7 @@
 
 static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
 	if (state->errmode != STATUS_BER) return 0;
 	*ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
@@ -477,7 +528,7 @@
 
 static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
 	s32 signal =  0xffff - ((stv0299_readreg (state, 0x18) << 8)
 			       | stv0299_readreg (state, 0x19));
@@ -494,7 +545,7 @@
 
 static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
 	s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8)
 			   | stv0299_readreg (state, 0x25));
@@ -506,7 +557,7 @@
 
 static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
 	if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0;
 	else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
@@ -516,7 +567,7 @@
 
 static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 	int invval = 0;
 
 	dprintk ("%s : FE_SET_FRONTEND\n", __FUNCTION__);
@@ -584,7 +635,7 @@
 
 static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 	s32 derot_freq;
 	int invval;
 
@@ -609,7 +660,7 @@
 
 static int stv0299_sleep(struct dvb_frontend* fe)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
 	stv0299_writeregI(state, 0x02, 0x80);
 	state->initialised = 0;
@@ -619,7 +670,7 @@
 
 static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
 {
-        struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+        struct stv0299_state* state = fe->demodulator_priv;
 
 	fesettings->min_delay_ms = state->config->min_delay_ms;
 	if (fesettings->parameters.u.qpsk.symbol_rate < 10000000) {
@@ -634,7 +685,7 @@
 
 static void stv0299_release(struct dvb_frontend* fe)
 {
-	struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv;
+	struct stv0299_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -647,7 +698,7 @@
 	int id;
 
 	/* allocate memory for the internal state */
-	state = (struct stv0299_state*) kmalloc(sizeof(struct stv0299_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct stv0299_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
@@ -719,6 +770,9 @@
 	.dishnetwork_send_legacy_command = stv0299_send_legacy_dish_cmd,
 };
 
+module_param(debug_legacy_dish_switch, int, 0444);
+MODULE_PARM_DESC(debug_legacy_dish_switch, "Enable timing analysis for Dish Network legacy switches");
+
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index 4e40d95..87d5f4d 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -205,7 +205,7 @@
 
 static int tda10021_init (struct dvb_frontend *fe)
 {
-	struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+	struct tda10021_state* state = fe->demodulator_priv;
 	int i;
 
 	dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num);
@@ -238,7 +238,7 @@
 static int tda10021_set_parameters (struct dvb_frontend *fe,
 			    struct dvb_frontend_parameters *p)
 {
-	struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+	struct tda10021_state* state = fe->demodulator_priv;
 
 	//table for QAM4-QAM256 ready  QAM4  QAM16 QAM32 QAM64 QAM128 QAM256
 	//CONF
@@ -278,7 +278,7 @@
 
 static int tda10021_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+	struct tda10021_state* state = fe->demodulator_priv;
 	int sync;
 
 	*status = 0;
@@ -303,7 +303,7 @@
 
 static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+	struct tda10021_state* state = fe->demodulator_priv;
 
 	u32 _ber = tda10021_readreg(state, 0x14) |
 		(tda10021_readreg(state, 0x15) << 8) |
@@ -315,7 +315,7 @@
 
 static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+	struct tda10021_state* state = fe->demodulator_priv;
 
 	u8 gain = tda10021_readreg(state, 0x17);
 	*strength = (gain << 8) | gain;
@@ -325,7 +325,7 @@
 
 static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+	struct tda10021_state* state = fe->demodulator_priv;
 
 	u8 quality = ~tda10021_readreg(state, 0x18);
 	*snr = (quality << 8) | quality;
@@ -335,7 +335,7 @@
 
 static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+	struct tda10021_state* state = fe->demodulator_priv;
 
 	*ucblocks = tda10021_readreg (state, 0x13) & 0x7f;
 	if (*ucblocks == 0x7f)
@@ -350,7 +350,7 @@
 
 static int tda10021_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+	struct tda10021_state* state = fe->demodulator_priv;
 	int sync;
 	s8 afc = 0;
 
@@ -378,7 +378,7 @@
 
 static int tda10021_sleep(struct dvb_frontend* fe)
 {
-	struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+	struct tda10021_state* state = fe->demodulator_priv;
 
 	tda10021_writereg (state, 0x1b, 0x02);  /* pdown ADC */
 	tda10021_writereg (state, 0x00, 0x80);  /* standby */
@@ -388,7 +388,7 @@
 
 static void tda10021_release(struct dvb_frontend* fe)
 {
-	struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv;
+	struct tda10021_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -401,7 +401,7 @@
 	struct tda10021_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct tda10021_state*) kmalloc(sizeof(struct tda10021_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct tda10021_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 687ad9c..0beb370 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -35,9 +35,10 @@
 #include "dvb_frontend.h"
 #include "tda1004x.h"
 
-#define TDA1004X_DEMOD_TDA10045 0
-#define TDA1004X_DEMOD_TDA10046 1
-
+enum tda1004x_demod {
+	TDA1004X_DEMOD_TDA10045,
+	TDA1004X_DEMOD_TDA10046,
+};
 
 struct tda1004x_state {
 	struct i2c_adapter* i2c;
@@ -46,8 +47,9 @@
 	struct dvb_frontend frontend;
 
 	/* private demod data */
-	u8 initialised:1;
-	u8 demod_type;
+	u8 initialised;
+	enum tda1004x_demod demod_type;
+	u8 fw_version;
 };
 
 
@@ -139,7 +141,7 @@
 {
 	int ret;
 	u8 buf[] = { reg, data };
-	struct i2c_msg msg = { .addr=0, .flags=0, .buf=buf, .len=2 };
+	struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
 
 	dprintk("%s: reg=0x%x, data=0x%x\n", __FUNCTION__, reg, data);
 
@@ -160,8 +162,8 @@
 	int ret;
 	u8 b0[] = { reg };
 	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = {{ .addr=0, .flags=0, .buf=b0, .len=1},
-				{ .addr=0, .flags=I2C_M_RD, .buf=b1, .len = 1}};
+	struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 },
+				{ .flags = I2C_M_RD, .buf = b1, .len = 1 }};
 
 	dprintk("%s: reg=0x%x\n", __FUNCTION__, reg);
 
@@ -294,7 +296,7 @@
 			      u8 dspCodeCounterReg, u8 dspCodeInReg)
 {
 	u8 buf[65];
-	struct i2c_msg fw_msg = {.addr = 0,.flags = 0,.buf = buf,.len = 0 };
+	struct i2c_msg fw_msg = { .flags = 0, .buf = buf, .len = 0 };
 	int tx_size;
 	int pos = 0;
 
@@ -304,12 +306,10 @@
 
 	buf[0] = dspCodeInReg;
 	while (pos != len) {
-
 		// work out how much to send this time
 		tx_size = len - pos;
-		if (tx_size > 0x10) {
+		if (tx_size > 0x10)
 			tx_size = 0x10;
-		}
 
 		// send the chunk
 		memcpy(buf + 1, mem + pos, tx_size);
@@ -322,6 +322,7 @@
 
 		dprintk("%s: fw_pos=0x%x\n", __FUNCTION__, pos);
 	}
+
 	return 0;
 }
 
@@ -335,9 +336,8 @@
 
 	data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1);
 	data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2);
-	if (data1 != 0x67 || data2 != dspVersion) {
+	if ((data1 != 0x67) || (data2 != dspVersion))
 		return -EIO;
-	}
 
 	return 0;
 }
@@ -348,9 +348,9 @@
 	int ret;
 	const struct firmware *fw;
 
-
 	/* don't re-upload unless necessary */
-	if (tda1004x_check_upload_ok(state, 0x2c) == 0) return 0;
+	if (tda1004x_check_upload_ok(state, 0x2c) == 0)
+		return 0;
 
 	/* request the firmware, this will block until someone uploads it */
 	printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);
@@ -381,6 +381,25 @@
 	return tda1004x_check_upload_ok(state, 0x2c);
 }
 
+static int tda10046_get_fw_version(struct tda1004x_state *state,
+				   const struct firmware *fw)
+{
+	const unsigned char pattern[] = { 0x67, 0x00, 0x50, 0x62, 0x5e, 0x18, 0x67 };
+	unsigned int i;
+
+	/* area guessed from firmware v20, v21 and v25 */
+	for (i = 0x660; i < 0x700; i++) {
+		if (!memcmp(&fw->data[i], pattern, sizeof(pattern))) {
+			state->fw_version = fw->data[i + sizeof(pattern)];
+			printk(KERN_INFO "tda1004x: using firmware v%02x\n",
+					state->fw_version);
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
 static int tda10046_fwupload(struct dvb_frontend* fe)
 {
 	struct tda1004x_state* state = fe->demodulator_priv;
@@ -394,7 +413,8 @@
 	msleep(100);
 
 	/* don't re-upload unless necessary */
-	if (tda1004x_check_upload_ok(state, 0x20) == 0) return 0;
+	if (tda1004x_check_upload_ok(state, state->fw_version) == 0)
+		return 0;
 
 	/* request the firmware, this will block until someone uploads it */
 	printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10046_DEFAULT_FIRMWARE);
@@ -404,9 +424,20 @@
 		return ret;
 	}
 
+	if (fw->size < 24478) { /* size of firmware v20, which is the smallest of v20, v21 and v25 */
+		printk("tda1004x: firmware file seems to be too small (%d bytes)\n", fw->size);
+		return -EINVAL;
+	}
+
+	ret = tda10046_get_fw_version(state, fw);
+	if (ret < 0) {
+		printk("tda1004x: unable to find firmware version\n");
+		return ret;
+	}
+
 	/* set parameters */
 	tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10);
-	tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0);
+	tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c);
 	tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99);
 	tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4);
 	tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c);
@@ -419,7 +450,7 @@
 
 	/* wait for DSP to initialise */
 	timeout = jiffies + HZ;
-	while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
+	while (!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
 		if (time_after(jiffies, timeout)) {
 			printk("tda1004x: DSP failed to initialised.\n");
 			return -EIO;
@@ -427,7 +458,7 @@
 		msleep(1);
 	}
 
-	return tda1004x_check_upload_ok(state, 0x20);
+	return tda1004x_check_upload_ok(state, state->fw_version);
 }
 
 static int tda1004x_encode_fec(int fec)
@@ -483,7 +514,8 @@
 
 	dprintk("%s\n", __FUNCTION__);
 
-	if (state->initialised) return 0;
+	if (state->initialised)
+		return 0;
 
 	if (tda10045_fwupload(fe)) {
 		printk("tda1004x: firmware upload failed\n");
@@ -523,7 +555,8 @@
 	struct tda1004x_state* state = fe->demodulator_priv;
 	dprintk("%s\n", __FUNCTION__);
 
-	if (state->initialised) return 0;
+	if (state->initialised)
+		return 0;
 
 	if (tda10046_fwupload(fe)) {
 		printk("tda1004x: firmware upload failed\n");
@@ -545,7 +578,7 @@
 	tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream
 	tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0); // disable pulse killer
 	tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); // PLL M = 10
-	tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
+	tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c); // PLL P = N = 0
 	tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); // FREQOFFS = 99
 	tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); // } PHY2 = -11221
 	tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); // }
@@ -621,12 +654,14 @@
 
 		// set HP FEC
 		tmp = tda1004x_encode_fec(fe_params->u.ofdm.code_rate_HP);
-		if (tmp < 0) return tmp;
+		if (tmp < 0)
+			return tmp;
 		tda1004x_write_mask(state, TDA1004X_IN_CONF2, 7, tmp);
 
 		// set LP FEC
 		tmp = tda1004x_encode_fec(fe_params->u.ofdm.code_rate_LP);
-		if (tmp < 0) return tmp;
+		if (tmp < 0)
+			return tmp;
 		tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x38, tmp << 3);
 
 		// set constellation
@@ -671,7 +706,7 @@
 	}
 
 	// set bandwidth
-	switch(state->demod_type) {
+	switch (state->demod_type) {
 	case TDA1004X_DEMOD_TDA10045:
 		tda10045h_set_bandwidth(state, fe_params->u.ofdm.bandwidth);
 		break;
@@ -683,7 +718,8 @@
 
 	// set inversion
 	inversion = fe_params->inversion;
-	if (state->config->invert) inversion = inversion ? INVERSION_OFF : INVERSION_ON;
+	if (state->config->invert)
+		inversion = inversion ? INVERSION_OFF : INVERSION_ON;
 	switch (inversion) {
 	case INVERSION_OFF:
 		tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0);
@@ -750,19 +786,19 @@
 	}
 
 	// start the lock
-	switch(state->demod_type) {
+	switch (state->demod_type) {
 	case TDA1004X_DEMOD_TDA10045:
 		tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
 		tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
-		msleep(10);
 		break;
 
 	case TDA1004X_DEMOD_TDA10046:
 		tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40);
-		msleep(10);
 		break;
 	}
 
+	msleep(10);
+
 	return 0;
 }
 
@@ -773,13 +809,13 @@
 
 	// inversion status
 	fe_params->inversion = INVERSION_OFF;
-	if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20) {
+	if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20)
 		fe_params->inversion = INVERSION_ON;
-	}
-	if (state->config->invert) fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;
+	if (state->config->invert)
+		fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;
 
 	// bandwidth
-	switch(state->demod_type) {
+	switch (state->demod_type) {
 	case TDA1004X_DEMOD_TDA10045:
 		switch (tda1004x_read_byte(state, TDA10045H_WREF_LSB)) {
 		case 0x14:
@@ -830,9 +866,8 @@
 
 	// transmission mode
 	fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K;
-	if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10) {
+	if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10)
 		fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K;
-	}
 
 	// guard interval
 	switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x0c) >> 2) {
@@ -880,30 +915,33 @@
 
 	// read status
 	status = tda1004x_read_byte(state, TDA1004X_STATUS_CD);
-	if (status == -1) {
+	if (status == -1)
 		return -EIO;
-	}
 
 	// decode
 	*fe_status = 0;
-	if (status & 4) *fe_status |= FE_HAS_SIGNAL;
-	if (status & 2) *fe_status |= FE_HAS_CARRIER;
-	if (status & 8) *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+	if (status & 4)
+		*fe_status |= FE_HAS_SIGNAL;
+	if (status & 2)
+		*fe_status |= FE_HAS_CARRIER;
+	if (status & 8)
+		*fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
 
 	// if we don't already have VITERBI (i.e. not LOCKED), see if the viterbi
 	// is getting anything valid
 	if (!(*fe_status & FE_HAS_VITERBI)) {
 		// read the CBER
 		cber = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
-		if (cber == -1) return -EIO;
+		if (cber == -1)
+			return -EIO;
 		status = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
-		if (status == -1) return -EIO;
+		if (status == -1)
+			return -EIO;
 		cber |= (status << 8);
 		tda1004x_read_byte(state, TDA1004X_CBER_RESET);
 
-		if (cber != 65535) {
+		if (cber != 65535)
 			*fe_status |= FE_HAS_VITERBI;
-		}
 	}
 
 	// if we DO have some valid VITERBI output, but don't already have SYNC
@@ -911,20 +949,22 @@
 	if ((*fe_status & FE_HAS_VITERBI) && (!(*fe_status & FE_HAS_SYNC))) {
 		// read the VBER
 		vber = tda1004x_read_byte(state, TDA1004X_VBER_LSB);
-		if (vber == -1) return -EIO;
+		if (vber == -1)
+			return -EIO;
 		status = tda1004x_read_byte(state, TDA1004X_VBER_MID);
-		if (status == -1) return -EIO;
+		if (status == -1)
+			return -EIO;
 		vber |= (status << 8);
 		status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
-		if (status == -1) return -EIO;
+		if (status == -1)
+			return -EIO;
 		vber |= ((status << 16) & 0x0f);
 		tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
 
 		// if RS has passed some valid TS packets, then we must be
 		// getting some SYNC bytes
-		if (vber < 16632) {
+		if (vber < 16632)
 			*fe_status |= FE_HAS_SYNC;
-		}
 	}
 
 	// success
@@ -941,7 +981,7 @@
 	dprintk("%s\n", __FUNCTION__);
 
 	// determine the register to use
-	switch(state->demod_type) {
+	switch (state->demod_type) {
 	case TDA1004X_DEMOD_TDA10045:
 		reg = TDA10045H_S_AGC;
 		break;
@@ -972,9 +1012,8 @@
 	tmp = tda1004x_read_byte(state, TDA1004X_SNR);
 	if (tmp < 0)
 		return -EIO;
-	if (tmp) {
+	if (tmp)
 		tmp = 255 - tmp;
-	}
 
 	*snr = ((tmp << 8) | tmp);
 	dprintk("%s: snr=0x%x\n", __FUNCTION__, *snr);
@@ -1009,11 +1048,11 @@
 			break;
 	}
 
-	if (tmp != 0x7f) {
+	if (tmp != 0x7f)
 		*ucblocks = tmp;
-	} else {
+	else
 		*ucblocks = 0xffffffff;
-	}
+
 	dprintk("%s: ucblocks=0x%x\n", __FUNCTION__, *ucblocks);
 	return 0;
 }
@@ -1027,10 +1066,12 @@
 
 	// read it in
 	tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
-	if (tmp < 0) return -EIO;
+	if (tmp < 0)
+		return -EIO;
 	*ber = tmp << 1;
 	tmp = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
-	if (tmp < 0) return -EIO;
+	if (tmp < 0)
+		return -EIO;
 	*ber |= (tmp << 9);
 	tda1004x_read_byte(state, TDA1004X_CBER_RESET);
 
@@ -1042,7 +1083,7 @@
 {
 	struct tda1004x_state* state = fe->demodulator_priv;
 
-	switch(state->demod_type) {
+	switch (state->demod_type) {
 	case TDA1004X_DEMOD_TDA10045:
 		tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0x10);
 		break;
@@ -1066,74 +1107,11 @@
 
 static void tda1004x_release(struct dvb_frontend* fe)
 {
-	struct tda1004x_state* state = (struct tda1004x_state*) fe->demodulator_priv;
+	struct tda1004x_state *state = fe->demodulator_priv;
 	kfree(state);
 }
 
-static struct dvb_frontend_ops tda10045_ops;
-
-struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
-				     struct i2c_adapter* i2c)
-{
-	struct tda1004x_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = (struct tda1004x_state*) kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
-	state->initialised = 0;
-	state->demod_type = TDA1004X_DEMOD_TDA10045;
-
-	/* check if the demod is there */
-	if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) goto error;
-
-	/* create dvb_frontend */
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops tda10046_ops;
-
-struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
-				     struct i2c_adapter* i2c)
-{
-	struct tda1004x_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = (struct tda1004x_state*) kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
-	state->initialised = 0;
-	state->demod_type = TDA1004X_DEMOD_TDA10046;
-
-	/* check if the demod is there */
-	if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) goto error;
-
-	/* create dvb_frontend */
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	if (state) kfree(state);
-	return NULL;
-}
-
 static struct dvb_frontend_ops tda10045_ops = {
-
 	.info = {
 		.name = "Philips TDA10045H DVB-T",
 		.type = FE_OFDM,
@@ -1163,8 +1141,36 @@
 	.read_ucblocks = tda1004x_read_ucblocks,
 };
 
-static struct dvb_frontend_ops tda10046_ops = {
+struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
+				     struct i2c_adapter* i2c)
+{
+	struct tda1004x_state *state;
 
+	/* allocate memory for the internal state */
+	state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	memcpy(&state->ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
+	state->initialised = 0;
+	state->demod_type = TDA1004X_DEMOD_TDA10045;
+
+	/* check if the demod is there */
+	if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) {
+		kfree(state);
+		return NULL;
+	}
+
+	/* create dvb_frontend */
+	state->frontend.ops = &state->ops;
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+}
+
+static struct dvb_frontend_ops tda10046_ops = {
 	.info = {
 		.name = "Philips TDA10046H DVB-T",
 		.type = FE_OFDM,
@@ -1194,6 +1200,36 @@
 	.read_ucblocks = tda1004x_read_ucblocks,
 };
 
+struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
+				     struct i2c_adapter* i2c)
+{
+	struct tda1004x_state *state;
+
+	/* allocate memory for the internal state */
+	state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
+	state->initialised = 0;
+	state->demod_type = TDA1004X_DEMOD_TDA10046;
+	state->fw_version = 0x20;	/* dummy default value */
+
+	/* check if the demod is there */
+	if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) {
+		kfree(state);
+		return NULL;
+	}
+
+	/* create dvb_frontend */
+	state->frontend.ops = &state->ops;
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+}
+
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
index e452fc0..c8e1d54 100644
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ b/drivers/media/dvb/frontends/tda1004x.h
@@ -32,10 +32,13 @@
 	u8 demod_address;
 
 	/* does the "inversion" need inverted? */
-	u8 invert:1;
+	u8 invert;
 
 	/* Does the OCLK signal need inverted? */
-	u8 invert_oclk:1;
+	u8 invert_oclk;
+
+	/* value of N_I2C of the CONF_PLL3 register */
+	u8 n_i2c;
 
 	/* PLL maintenance */
 	int (*pll_init)(struct dvb_frontend* fe);
diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
index da82e90..168e013 100644
--- a/drivers/media/dvb/frontends/tda8083.c
+++ b/drivers/media/dvb/frontends/tda8083.c
@@ -226,7 +226,7 @@
 static int tda8083_send_diseqc_msg (struct dvb_frontend* fe,
 				    struct dvb_diseqc_master_cmd *m)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 	int i;
 
 	tda8083_writereg (state, 0x29, (m->msg_len - 3) | (1 << 2)); /* enable */
@@ -243,7 +243,7 @@
 
 static int tda8083_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 
 	u8 signal = ~tda8083_readreg (state, 0x01);
 	u8 sync = tda8083_readreg (state, 0x02);
@@ -270,7 +270,7 @@
 
 static int tda8083_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 
 	u8 signal = ~tda8083_readreg (state, 0x01);
 	*strength = (signal << 8) | signal;
@@ -280,7 +280,7 @@
 
 static int tda8083_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 
 	u8 _snr = tda8083_readreg (state, 0x08);
 	*snr = (_snr << 8) | _snr;
@@ -290,7 +290,7 @@
 
 static int tda8083_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 
 	state->config->pll_set(fe, p);
 	tda8083_set_inversion (state, p->inversion);
@@ -305,7 +305,7 @@
 
 static int tda8083_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 
 	/*  FIXME: get symbolrate & frequency offset...*/
 	/*p->frequency = ???;*/
@@ -319,7 +319,7 @@
 
 static int tda8083_sleep(struct dvb_frontend* fe)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 
 	tda8083_writereg (state, 0x00, 0x02);
 	return 0;
@@ -327,7 +327,7 @@
 
 static int tda8083_init(struct dvb_frontend* fe)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 	int i;
 
 	for (i=0; i<44; i++)
@@ -343,7 +343,7 @@
 
 static int tda8083_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 
 	tda8083_send_diseqc_burst (state, burst);
 	tda8083_writereg (state, 0x00, 0x3c);
@@ -354,7 +354,7 @@
 
 static int tda8083_diseqc_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 
 	tda8083_set_tone (state, tone);
 	tda8083_writereg (state, 0x00, 0x3c);
@@ -365,7 +365,7 @@
 
 static int tda8083_diseqc_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 
 	tda8083_set_voltage (state, voltage);
 	tda8083_writereg (state, 0x00, 0x3c);
@@ -376,7 +376,7 @@
 
 static void tda8083_release(struct dvb_frontend* fe)
 {
-	struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv;
+	struct tda8083_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -388,7 +388,7 @@
 	struct tda8083_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct tda8083_state*) kmalloc(sizeof(struct tda8083_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct tda8083_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/tda80xx.c b/drivers/media/dvb/frontends/tda80xx.c
index c996321..032d348 100644
--- a/drivers/media/dvb/frontends/tda80xx.c
+++ b/drivers/media/dvb/frontends/tda80xx.c
@@ -27,7 +27,7 @@
 #include <linux/spinlock.h>
 #include <linux/threads.h>
 #include <linux/interrupt.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -400,7 +400,7 @@
 
 static int tda8044_init(struct dvb_frontend* fe)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 	int ret;
 
 	/*
@@ -432,7 +432,7 @@
 
 static int tda8083_init(struct dvb_frontend* fe)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	tda80xx_write(state, 0x00, tda8083_inittab, sizeof(tda8083_inittab));
 
@@ -447,7 +447,7 @@
 
 static int tda80xx_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	switch (voltage) {
 	case SEC_VOLTAGE_13:
@@ -463,7 +463,7 @@
 
 static int tda80xx_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	switch (tone) {
 	case SEC_TONE_OFF:
@@ -477,7 +477,7 @@
 
 static int tda80xx_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	if (cmd->msg_len > 6)
 		return -EINVAL;
@@ -492,7 +492,7 @@
 
 static int tda80xx_send_diseqc_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t cmd)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	switch (cmd) {
 	case SEC_MINI_A:
@@ -512,7 +512,7 @@
 
 static int tda80xx_sleep(struct dvb_frontend* fe)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	tda80xx_writereg(state, 0x00, 0x02);	/* enter standby */
 
@@ -521,7 +521,7 @@
 
 static int tda80xx_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	tda80xx_writereg(state, 0x1c, 0x80);
 	state->config->pll_set(fe, p);
@@ -537,7 +537,7 @@
 
 static int tda80xx_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	if (!state->config->irq)
 		tda80xx_read_status_int(state);
@@ -550,7 +550,7 @@
 
 static int tda80xx_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	if (!state->config->irq)
 		tda80xx_read_status_int(state);
@@ -561,7 +561,7 @@
 
 static int tda80xx_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 	int ret;
 	u8 buf[3];
 
@@ -575,7 +575,7 @@
 
 static int tda80xx_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	u8 gain = ~tda80xx_readreg(state, 0x01);
 	*strength = (gain << 8) | gain;
@@ -585,7 +585,7 @@
 
 static int tda80xx_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	u8 quality = tda80xx_readreg(state, 0x08);
 	*snr = (quality << 8) | quality;
@@ -595,7 +595,7 @@
 
 static int tda80xx_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	*ucblocks = tda80xx_readreg(state, 0x0f);
 	if (*ucblocks == 0xff)
@@ -606,7 +606,7 @@
 
 static int tda80xx_init(struct dvb_frontend* fe)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	switch(state->id) {
 	case ID_TDA8044:
@@ -620,7 +620,7 @@
 
 static void tda80xx_release(struct dvb_frontend* fe)
 {
-	struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv;
+	struct tda80xx_state* state = fe->demodulator_priv;
 
 	if (state->config->irq)
 		free_irq(state->config->irq, &state->worklet);
@@ -637,7 +637,7 @@
 	int ret;
 
 	/* allocate memory for the internal state */
-	state = (struct tda80xx_state*) kmalloc(sizeof(struct tda80xx_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct tda80xx_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c
index 9c0d23e..70fb44b 100644
--- a/drivers/media/dvb/frontends/ves1820.c
+++ b/drivers/media/dvb/frontends/ves1820.c
@@ -70,7 +70,6 @@
 		printk("ves1820: %s(): writereg error (reg == 0x%02x,"
 			"val == 0x%02x, ret == %i)\n", __FUNCTION__, reg, data, ret);
 
-	msleep(10);
 	return (ret != 1) ? -EREMOTEIO : 0;
 }
 
@@ -193,7 +192,7 @@
 
 static int ves1820_init(struct dvb_frontend* fe)
 {
-	struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+	struct ves1820_state* state = fe->demodulator_priv;
 	int i;
 	int val;
 
@@ -214,7 +213,7 @@
 
 static int ves1820_set_parameters(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+	struct ves1820_state* state = fe->demodulator_priv;
 	static const u8 reg0x00[] = { 0x00, 0x04, 0x08, 0x0c, 0x10 };
 	static const u8 reg0x01[] = { 140, 140, 106, 100, 92 };
 	static const u8 reg0x05[] = { 135, 100, 70, 54, 38 };
@@ -241,7 +240,7 @@
 
 static int ves1820_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+	struct ves1820_state* state = fe->demodulator_priv;
 	int sync;
 
 	*status = 0;
@@ -267,7 +266,7 @@
 
 static int ves1820_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+	struct ves1820_state* state = fe->demodulator_priv;
 
 	u32 _ber = ves1820_readreg(state, 0x14) |
 			(ves1820_readreg(state, 0x15) << 8) |
@@ -279,7 +278,7 @@
 
 static int ves1820_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+	struct ves1820_state* state = fe->demodulator_priv;
 
 	u8 gain = ves1820_readreg(state, 0x17);
 	*strength = (gain << 8) | gain;
@@ -289,7 +288,7 @@
 
 static int ves1820_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+	struct ves1820_state* state = fe->demodulator_priv;
 
 	u8 quality = ~ves1820_readreg(state, 0x18);
 	*snr = (quality << 8) | quality;
@@ -299,7 +298,7 @@
 
 static int ves1820_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+	struct ves1820_state* state = fe->demodulator_priv;
 
 	*ucblocks = ves1820_readreg(state, 0x13) & 0x7f;
 	if (*ucblocks == 0x7f)
@@ -314,7 +313,7 @@
 
 static int ves1820_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+	struct ves1820_state* state = fe->demodulator_priv;
 	int sync;
 	s8 afc = 0;
 
@@ -345,7 +344,7 @@
 
 static int ves1820_sleep(struct dvb_frontend* fe)
 {
-	struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+	struct ves1820_state* state = fe->demodulator_priv;
 
 	ves1820_writereg(state, 0x1b, 0x02);	/* pdown ADC */
 	ves1820_writereg(state, 0x00, 0x80);	/* standby */
@@ -364,7 +363,7 @@
 
 static void ves1820_release(struct dvb_frontend* fe)
 {
-	struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv;
+	struct ves1820_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -377,7 +376,7 @@
 	struct ves1820_state* state = NULL;
 
 	/* allocate memory for the internal state */
-	state = (struct ves1820_state*) kmalloc(sizeof(struct ves1820_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct ves1820_state), GFP_KERNEL);
 	if (state == NULL)
 		goto error;
 
diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c
index edcad28..821df8e 100644
--- a/drivers/media/dvb/frontends/ves1x93.c
+++ b/drivers/media/dvb/frontends/ves1x93.c
@@ -263,7 +263,7 @@
 
 static int ves1x93_init (struct dvb_frontend* fe)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 	int i;
 	int val;
 
@@ -289,7 +289,7 @@
 
 static int ves1x93_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 
 	switch (voltage) {
 	case SEC_VOLTAGE_13:
@@ -305,7 +305,7 @@
 
 static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 
 	u8 sync = ves1x93_readreg (state, 0x0e);
 
@@ -346,7 +346,7 @@
 
 static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 
 	*ber = ves1x93_readreg (state, 0x15);
 	*ber |= (ves1x93_readreg (state, 0x16) << 8);
@@ -358,7 +358,7 @@
 
 static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 
 	u8 signal = ~ves1x93_readreg (state, 0x0b);
 	*strength = (signal << 8) | signal;
@@ -368,7 +368,7 @@
 
 static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 
 	u8 _snr = ~ves1x93_readreg (state, 0x1c);
 	*snr = (_snr << 8) | _snr;
@@ -378,7 +378,7 @@
 
 static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 
 	*ucblocks = ves1x93_readreg (state, 0x18) & 0x7f;
 
@@ -393,7 +393,7 @@
 
 static int ves1x93_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 
 	ves1x93_writereg(state, 0x00, 0x11);
 	state->config->pll_set(fe, p);
@@ -408,7 +408,7 @@
 
 static int ves1x93_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 	int afc;
 
 	afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2;
@@ -431,14 +431,14 @@
 
 static int ves1x93_sleep(struct dvb_frontend* fe)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 
 	return ves1x93_writereg (state, 0x00, 0x08);
 }
 
 static void ves1x93_release(struct dvb_frontend* fe)
 {
-	struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv;
+	struct ves1x93_state* state = fe->demodulator_priv;
 	kfree(state);
 }
 
@@ -451,7 +451,7 @@
 	u8 identity;
 
 	/* allocate memory for the internal state */
-	state = (struct ves1x93_state*) kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
+	state = kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
 	if (state == NULL) goto error;
 
 	/* setup the state */
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 922c205..8e33a85 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -130,7 +130,7 @@
 	av7110->current_input = 0;
 	if (i2c_writereg(av7110, 0x20, 0x00, 0x00) == 1) {
 		printk ("dvb-ttpci: Crystal audio DAC @ card %d detected\n",
-			av7110->dvb_adapter->num);
+			av7110->dvb_adapter.num);
 		av7110->adac_type = DVB_ADAC_CRYSTAL;
 		i2c_writereg(av7110, 0x20, 0x01, 0xd2);
 		i2c_writereg(av7110, 0x20, 0x02, 0x49);
@@ -145,13 +145,13 @@
 	}
 	else if (dev->pci->subsystem_vendor == 0x110a) {
 		printk("dvb-ttpci: DVB-C w/o analog module @ card %d detected\n",
-			av7110->dvb_adapter->num);
+			av7110->dvb_adapter.num);
 		av7110->adac_type = DVB_ADAC_NONE;
 	}
 	else {
 		av7110->adac_type = adac;
 		printk("dvb-ttpci: adac type set to %d @ card %d\n",
-			av7110->dvb_adapter->num, av7110->adac_type);
+			av7110->dvb_adapter.num, av7110->adac_type);
 	}
 
 	if (av7110->adac_type == DVB_ADAC_NONE || av7110->adac_type == DVB_ADAC_MSP) {
@@ -231,7 +231,7 @@
 
 		if (newloops == av7110->arm_loops) {
 			printk(KERN_ERR "dvb-ttpci: ARM crashed @ card %d\n",
-			       av7110->dvb_adapter->num);
+			       av7110->dvb_adapter.num);
 
 			arm_error(av7110);
 			av7710_set_video_mode(av7110, vidmode);
@@ -1282,7 +1282,7 @@
 	av7110->dmxdev.demux = &dvbdemux->dmx;
 	av7110->dmxdev.capabilities = 0;
 
-	dvb_dmxdev_init(&av7110->dmxdev, av7110->dvb_adapter);
+	dvb_dmxdev_init(&av7110->dmxdev, &av7110->dvb_adapter);
 
 	av7110->hw_frontend.source = DMX_FRONTEND_0;
 
@@ -1307,11 +1307,11 @@
 	av7110_ca_register(av7110);
 
 #ifdef CONFIG_DVB_AV7110_OSD
-	dvb_register_device(av7110->dvb_adapter, &av7110->osd_dev,
+	dvb_register_device(&av7110->dvb_adapter, &av7110->osd_dev,
 			    &dvbdev_osd, av7110, DVB_DEVICE_OSD);
 #endif
 
-	dvb_net_init(av7110->dvb_adapter, &av7110->dvb_net, &dvbdemux->dmx);
+	dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net, &dvbdemux->dmx);
 
 	if (budgetpatch) {
 		/* initialize software demux1 without its own frontend
@@ -1334,9 +1334,9 @@
 		av7110->dmxdev1.demux = &dvbdemux1->dmx;
 		av7110->dmxdev1.capabilities = 0;
 
-		dvb_dmxdev_init(&av7110->dmxdev1, av7110->dvb_adapter);
+		dvb_dmxdev_init(&av7110->dmxdev1, &av7110->dvb_adapter);
 
-		dvb_net_init(av7110->dvb_adapter, &av7110->dvb_net1, &dvbdemux1->dmx);
+		dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net1, &dvbdemux1->dmx);
 		printk("dvb-ttpci: additional demux1 for budget-patch registered\n");
 	}
 	return 0;
@@ -1673,6 +1673,106 @@
 };
 
 
+static u8 alps_bsbe1_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x30,
+	0x03, 0x00,
+	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+	0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
+	0x06, 0x40,   /* DAC not used, set to high impendance mode */
+	0x07, 0x00,   /* DAC LSB */
+	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
+	0x09, 0x00,   /* FIFO */
+	0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+	0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
+	0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
+	0x10, 0x3f,   // AGC2  0x3d
+	0x11, 0x84,
+	0x12, 0xb5,   // Lock detect: -64  Carrier freq detect:on
+	0x15, 0xc9,   // lock detector threshold
+	0x16, 0x00,
+	0x17, 0x00,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1a, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,  // out imp: normal  out type: parallel FEC mode:0
+	0x29, 0x1e,  // 1/2 threshold
+	0x2a, 0x14,  // 2/3 threshold
+	0x2b, 0x0f,  // 3/4 threshold
+	0x2c, 0x09,  // 5/6 threshold
+	0x2d, 0x05,  // 7/8 threshold
+	0x2e, 0x01,
+	0x31, 0x1f,  // test all FECs
+	0x32, 0x19,  // viterbi and synchro search
+	0x33, 0xfc,  // rs control
+	0x34, 0x93,  // error control
+	0x0f, 0x92,
+	0xff, 0xff
+};
+
+static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+	struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
+	int ret;
+	u8 data[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	if ((params->frequency < 950000) || (params->frequency > 2150000))
+		return -EINVAL;
+
+	div = (params->frequency + (125 - 1)) / 125; // round correctly
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+	data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
+
+	ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
+	return (ret != 1) ? -EIO : 0;
+}
+
+static struct stv0299_config alps_bsbe1_config = {
+	.demod_address = 0x68,
+	.inittab = alps_bsbe1_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.enhanced_tuning = 0,
+	.skip_reinit = 0,
+	.min_delay_ms = 100,
+	.set_symbol_rate = alps_bsru6_set_symbol_rate,
+	.pll_set = alps_bsbe1_pll_set,
+};
+
+static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+	struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
+	int ret;
+	u8 data[1];
+	struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	switch(voltage) {
+	case SEC_VOLTAGE_OFF:
+		data[0] = 0x00;
+		break;
+	case SEC_VOLTAGE_13:
+		data[0] = 0x44;
+		break;
+	case SEC_VOLTAGE_18:
+		data[0] = 0x4c;
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
+	return (ret != 1) ? -EIO : 0;
+}
+
 
 static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
 {
@@ -2116,6 +2216,14 @@
 				av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
 				break;
 			}
+			break;
+
+		case 0x000E: /* Hauppauge/TT Nexus-S rev 2.3 */
+			/* ALPS BSBE1 */
+			av7110->fe = stv0299_attach(&alps_bsbe1_config, &av7110->i2c_adap);
+			if (av7110->fe)
+				av7110->fe->ops->set_voltage = lnbp21_set_voltage;
+			break;
 		}
 	}
 
@@ -2138,7 +2246,7 @@
 		FE_FUNC_OVERRIDE(av7110->fe->ops->dishnetwork_send_legacy_command, av7110->fe_dishnetwork_send_legacy_command, av7110_fe_dishnetwork_send_legacy_command);
 		FE_FUNC_OVERRIDE(av7110->fe->ops->set_frontend, av7110->fe_set_frontend, av7110_fe_set_frontend);
 
-		ret = dvb_register_frontend(av7110->dvb_adapter, av7110->fe);
+		ret = dvb_register_frontend(&av7110->dvb_adapter, av7110->fe);
 		if (ret < 0) {
 			printk("av7110: Frontend registration failed!\n");
 			if (av7110->fe->ops->release)
@@ -2352,7 +2460,7 @@
 		goto err_dvb_unregister_adapter_2;
 
 	ttpci_eeprom_parse_mac(&av7110->i2c_adap,
-			       av7110->dvb_adapter->proposed_mac);
+			       av7110->dvb_adapter.proposed_mac);
 	ret = -ENOMEM;
 
 	if (budgetpatch) {
@@ -2523,7 +2631,7 @@
 	if (ret < 0)
 		goto err_av7110_unregister_11;
 
-	av7110->dvb_adapter->priv = av7110;
+	av7110->dvb_adapter.priv = av7110;
 	ret = frontend_init(av7110);
 	if (ret < 0)
 		goto err_av7110_exit_v4l_12;
@@ -2558,7 +2666,7 @@
 err_i2c_del_3:
 	i2c_del_adapter(&av7110->i2c_adap);
 err_dvb_unregister_adapter_2:
-	dvb_unregister_adapter(av7110->dvb_adapter);
+	dvb_unregister_adapter(&av7110->dvb_adapter);
 err_put_firmware_1:
 	put_firmware(av7110);
 err_kfree_0:
@@ -2604,7 +2712,7 @@
 
 	i2c_del_adapter(&av7110->i2c_adap);
 
-	dvb_unregister_adapter (av7110->dvb_adapter);
+	dvb_unregister_adapter (&av7110->dvb_adapter);
 
 	av7110_num--;
 
@@ -2672,21 +2780,23 @@
 MAKE_AV7110_INFO(ttc_1_X,    "Technotrend/Hauppauge WinTV Nexus-CA rev1.X");
 MAKE_AV7110_INFO(ttc_2_X,    "Technotrend/Hauppauge WinTV DVB-C rev2.X");
 MAKE_AV7110_INFO(tts_2_X,    "Technotrend/Hauppauge WinTV Nexus-S rev2.X");
+MAKE_AV7110_INFO(tts_2_3,    "Technotrend/Hauppauge WinTV Nexus-S rev2.3");
 MAKE_AV7110_INFO(tts_1_3se,  "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE");
 MAKE_AV7110_INFO(ttt,        "Technotrend/Hauppauge DVB-T");
 MAKE_AV7110_INFO(fsc,        "Fujitsu Siemens DVB-C");
 MAKE_AV7110_INFO(fss,        "Fujitsu Siemens DVB-S rev1.6");
 
 static struct pci_device_id pci_tbl[] = {
+	MAKE_EXTENSION_PCI(fsc,       0x110a, 0x0000),
 	MAKE_EXTENSION_PCI(tts_1_X,   0x13c2, 0x0000),
 	MAKE_EXTENSION_PCI(ttt_1_X,   0x13c2, 0x0001),
 	MAKE_EXTENSION_PCI(ttc_2_X,   0x13c2, 0x0002),
 	MAKE_EXTENSION_PCI(tts_2_X,   0x13c2, 0x0003),
-	MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
-	MAKE_EXTENSION_PCI(fsc,       0x110a, 0x0000),
-	MAKE_EXTENSION_PCI(ttc_1_X,   0x13c2, 0x000a),
 	MAKE_EXTENSION_PCI(fss,       0x13c2, 0x0006),
 	MAKE_EXTENSION_PCI(ttt,       0x13c2, 0x0008),
+	MAKE_EXTENSION_PCI(ttc_1_X,   0x13c2, 0x000a),
+	MAKE_EXTENSION_PCI(tts_2_3,   0x13c2, 0x000e),
+	MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
 
 /*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte
 /*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h
index 5070e05..4f69b4d 100644
--- a/drivers/media/dvb/ttpci/av7110.h
+++ b/drivers/media/dvb/ttpci/av7110.h
@@ -220,7 +220,7 @@
 
 	struct audio_mixer	mixer;
 
-	struct dvb_adapter	 *dvb_adapter;
+	struct dvb_adapter	 dvb_adapter;
 	struct dvb_device	 *video_dev;
 	struct dvb_device	 *audio_dev;
 	struct dvb_device	 *ca_dev;
@@ -274,7 +274,6 @@
 extern int i2c_writereg(struct av7110 *av7110, u8 id, u8 reg, u8 val);
 extern u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg);
 extern int msp_writereg(struct av7110 *av7110, u8 dev, u16 reg, u16 val);
-extern int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val);
 
 
 extern int av7110_init_analog_module(struct av7110 *av7110);
diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
index d77e8a0..ccf9461 100644
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ b/drivers/media/dvb/ttpci/av7110_av.c
@@ -1075,7 +1075,7 @@
 		}
 		if (ret < 0)
 			break;
-		av7110->videostate.video_format = format;
+		av7110->videostate.display_format = format;
 		ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetPanScanType,
 				    1, (u16) val);
 		break;
@@ -1230,14 +1230,20 @@
 		switch(av7110->audiostate.channel_select) {
 		case AUDIO_STEREO:
 			audcom(av7110, AUDIO_CMD_STEREO);
+			if (av7110->adac_type == DVB_ADAC_CRYSTAL)
+				i2c_writereg(av7110, 0x20, 0x02, 0x49);
 			break;
 
 		case AUDIO_MONO_LEFT:
 			audcom(av7110, AUDIO_CMD_MONO_L);
+			if (av7110->adac_type == DVB_ADAC_CRYSTAL)
+				i2c_writereg(av7110, 0x20, 0x02, 0x4a);
 			break;
 
 		case AUDIO_MONO_RIGHT:
 			audcom(av7110, AUDIO_CMD_MONO_R);
+			if (av7110->adac_type == DVB_ADAC_CRYSTAL)
+				i2c_writereg(av7110, 0x20, 0x02, 0x45);
 			break;
 
 		default:
@@ -1409,10 +1415,10 @@
 	av7110->video_events.overflow = 0;
 	memset(&av7110->video_size, 0, sizeof (video_size_t));
 
-	dvb_register_device(av7110->dvb_adapter, &av7110->video_dev,
+	dvb_register_device(&av7110->dvb_adapter, &av7110->video_dev,
 			    &dvbdev_video, av7110, DVB_DEVICE_VIDEO);
 
-	dvb_register_device(av7110->dvb_adapter, &av7110->audio_dev,
+	dvb_register_device(&av7110->dvb_adapter, &av7110->audio_dev,
 			    &dvbdev_audio, av7110, DVB_DEVICE_AUDIO);
 
 	return 0;
diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c
index 21f7aac..c3801e3 100644
--- a/drivers/media/dvb/ttpci/av7110_ca.c
+++ b/drivers/media/dvb/ttpci/av7110_ca.c
@@ -123,7 +123,7 @@
 }
 
 static int ci_ll_reset(struct dvb_ringbuffer *cibuf, struct file *file,
-		int slots, ca_slot_info_t *slot)
+		       int slots, ca_slot_info_t *slot)
 {
 	int i;
 	int len = 0;
@@ -370,7 +370,7 @@
 
 int av7110_ca_register(struct av7110 *av7110)
 {
-	return dvb_register_device(av7110->dvb_adapter, &av7110->ca_dev,
+	return dvb_register_device(&av7110->dvb_adapter, &av7110->ca_dev,
 				   &dvbdev_ca, av7110, DVB_DEVICE_CA);
 }
 
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index bd6e5ea..7fa4a0e 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -104,7 +104,7 @@
 
 
 /* av7110 ARM core boot stuff */
-
+#if 0
 void av7110_reset_arm(struct av7110 *av7110)
 {
 	saa7146_setgpio(av7110->dev, RESET_LINE, SAA7146_GPIO_OUTLO);
@@ -124,7 +124,7 @@
 	av7110->arm_ready = 1;
 	dprintk(1, "reset ARM\n");
 }
-
+#endif  /*  0  */
 
 static int waitdebi(struct av7110 *av7110, int adr, int state)
 {
@@ -335,7 +335,7 @@
 	return 0;
 }
 
-int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
+static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
 {
 	int i;
 	unsigned long start;
@@ -455,7 +455,7 @@
 	return 0;
 }
 
-int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
+static int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
 {
 	int ret;
 
@@ -500,6 +500,7 @@
 	return ret;
 }
 
+#if 0
 int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len)
 {
 	int i, ret;
@@ -521,6 +522,7 @@
 		printk(KERN_ERR "dvb-ttpci: av7110_send_ci_cmd error %d\n", ret);
 	return ret;
 }
+#endif  /*  0  */
 
 int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
 		      int request_buf_len, u16 *reply_buf, int reply_buf_len)
@@ -593,7 +595,7 @@
 	return 0;
 }
 
-int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* buf, s16 length)
+static int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* buf, s16 length)
 {
 	int ret;
 	ret = av7110_fw_request(av7110, &tag, 0, buf, length);
@@ -617,7 +619,7 @@
 
 	if (av7110_fw_query(av7110, tag, buf, 16)) {
 		printk("dvb-ttpci: failed to boot firmware @ card %d\n",
-		       av7110->dvb_adapter->num);
+		       av7110->dvb_adapter.num);
 		return -EIO;
 	}
 
@@ -628,16 +630,16 @@
 	av7110->avtype = (buf[8] << 16) + buf[9];
 
 	printk("dvb-ttpci: info @ card %d: firm %08x, rtsl %08x, vid %08x, app %08x\n",
-	       av7110->dvb_adapter->num, av7110->arm_fw,
+	       av7110->dvb_adapter.num, av7110->arm_fw,
 	       av7110->arm_rtsl, av7110->arm_vid, av7110->arm_app);
 
 	/* print firmware capabilities */
 	if (FW_CI_LL_SUPPORT(av7110->arm_app))
 		printk("dvb-ttpci: firmware @ card %d supports CI link layer interface\n",
-		       av7110->dvb_adapter->num);
+		       av7110->dvb_adapter.num);
 	else
 		printk("dvb-ttpci: no firmware support for CI link layer interface @ card %d\n",
-		       av7110->dvb_adapter->num);
+		       av7110->dvb_adapter.num);
 
 	return 0;
 }
diff --git a/drivers/media/dvb/ttpci/av7110_hw.h b/drivers/media/dvb/ttpci/av7110_hw.h
index bf901c6..52061e1 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.h
+++ b/drivers/media/dvb/ttpci/av7110_hw.h
@@ -364,7 +364,6 @@
 
 
 
-extern void av7110_reset_arm(struct av7110 *av7110);
 extern int av7110_bootarm(struct av7110 *av7110);
 extern int av7110_firmversion(struct av7110 *av7110);
 #define FW_CI_LL_SUPPORT(arm_app) ((arm_app) & 0x80000000)
@@ -373,12 +372,8 @@
 
 extern int av7110_wait_msgstate(struct av7110 *av7110, u16 flags);
 extern int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...);
-extern int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length);
-extern int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length);
-extern int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len);
 extern int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
 			     int request_buf_len, u16 *reply_buf, int reply_buf_len);
-extern int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* Buff, s16 length);
 
 
 /* DEBI (saa7146 data extension bus interface) access */
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 6d2256f..665cdb8 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -10,7 +10,7 @@
 
 #define UP_TIMEOUT (HZ/4)
 
-/* enable ir debugging by or'ing av7110_debug with 16 */
+/* enable ir debugging by or'ing debug with 16 */
 
 static int ir_initialized;
 static struct input_dev input_dev;
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index eb84fb0..e65fc36 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -46,13 +46,13 @@
 
 	if (i2c_transfer(&av7110->i2c_adap, &msgs, 1) != 1) {
 		dprintk(1, "dvb-ttpci: failed @ card %d, %u = %u\n",
-		       av7110->dvb_adapter->num, reg, val);
+		       av7110->dvb_adapter.num, reg, val);
 		return -EIO;
 	}
 	return 0;
 }
 
-int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val)
+static int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val)
 {
 	u8 msg1[3] = { dev, reg >> 8, reg & 0xff };
 	u8 msg2[2];
@@ -63,7 +63,7 @@
 
 	if (i2c_transfer(&av7110->i2c_adap, &msgs[0], 2) != 2) {
 		dprintk(1, "dvb-ttpci: failed @ card %d, %u\n",
-		       av7110->dvb_adapter->num, reg);
+		       av7110->dvb_adapter.num, reg);
 		return -EIO;
 	}
 	*val = (msg2[0] << 8) | msg2[1];
@@ -552,13 +552,13 @@
 		return -ENODEV;
 
 	printk("dvb-ttpci: DVB-C analog module @ card %d detected, initializing MSP3400\n",
-		av7110->dvb_adapter->num);
+		av7110->dvb_adapter.num);
 	av7110->adac_type = DVB_ADAC_MSP;
 	msleep(100); // the probing above resets the msp...
 	msp_readreg(av7110, MSP_RD_DSP, 0x001e, &version1);
 	msp_readreg(av7110, MSP_RD_DSP, 0x001f, &version2);
 	dprintk(1, "dvb-ttpci: @ card %d MSP3400 version 0x%04x 0x%04x\n",
-		av7110->dvb_adapter->num, version1, version2);
+		av7110->dvb_adapter.num, version1, version2);
 	msp_writereg(av7110, MSP_WR_DSP, 0x0013, 0x0c00);
 	msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x7f00); // loudspeaker + headphone
 	msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0220); // loudspeaker source
@@ -596,7 +596,7 @@
 		/* init the saa7113 */
 		while (*i != 0xff) {
 			if (i2c_writereg(av7110, 0x48, i[0], i[1]) != 1) {
-				dprintk(1, "saa7113 initialization failed @ card %d", av7110->dvb_adapter->num);
+				dprintk(1, "saa7113 initialization failed @ card %d", av7110->dvb_adapter.num);
 				break;
 			}
 			i += 2;
@@ -726,11 +726,11 @@
 {
 	struct av7110 *av7110 = (struct av7110*) dev->ext_priv;
 
-	if (std->id == V4L2_STD_PAL) {
+	if (std->id & V4L2_STD_PAL) {
 		av7110->vidmode = VIDEO_MODE_PAL;
 		av7110_set_vidmode(av7110, av7110->vidmode);
 	}
-	else if (std->id == V4L2_STD_NTSC) {
+	else if (std->id & V4L2_STD_NTSC) {
 		av7110->vidmode = VIDEO_MODE_NTSC;
 		av7110_set_vidmode(av7110, av7110->vidmode);
 	}
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 14e96320..6e0f5d3 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -59,8 +59,12 @@
 	struct dvb_ca_en50221 ca;
 };
 
-static int enable_ci = 0;
-
+/* GPIO CI Connections:
+ * 0 - Vcc/Reset (Reset is controlled by capacitor)
+ * 1 - Attribute Memory
+ * 2 - Card Enable (Active Low)
+ * 3 - Card Detect
+ */
 
 /****************************************************************************
  * INITIALIZATION
@@ -188,22 +192,35 @@
 {
 	struct budget_av *budget_av = (struct budget_av *) ca->data;
 	struct saa7146_dev *saa = budget_av->budget.dev;
-	int max = 20;
+	int timeout = 50; // 5 seconds (4.4.6 Ready)
 
 	if (slot != 0)
 		return -EINVAL;
 
 	dprintk(1, "ciintf_slot_reset\n");
 
-	/* reset the card */
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
-	msleep(100);
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
 
-	while (--max > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+	msleep(2);
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
+	msleep(20); /* 20 ms Vcc settling time */
+
+	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
+
+	/* This should have been based on pin 16 READY of the pcmcia port,
+	 * but AFAICS it is not routed to the saa7146 */
+	while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
 		msleep(100);
 
-	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+	if (timeout <= 0)
+	{
+		printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
+		saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+		return -ETIMEDOUT;
+	}
+
 	return 0;
 }
 
@@ -240,7 +257,6 @@
 {
 	struct budget_av *budget_av = (struct budget_av *) ca->data;
 	struct saa7146_dev *saa = budget_av->budget.dev;
-	int cam = 0;
 
 	if (slot != 0)
 		return -EINVAL;
@@ -248,15 +264,21 @@
 	if (!budget_av->slot_status) {
 		saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
 		udelay(1);
-		cam = saa7146_read(saa, PSR) & MASK_06;
-		saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-
-		if (cam)
+		if (saa7146_read(saa, PSR) & MASK_06)
+		{
+			printk(KERN_INFO "budget-av: cam inserted\n");
 			budget_av->slot_status = 1;
+		}
+		saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
 	} else if (!open) {
 		saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
 		if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
+		{
+			printk(KERN_INFO "budget-av: cam ejected\n");
+			saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+			saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
 			budget_av->slot_status = 0;
+		}
 	}
 
 	if (budget_av->slot_status == 1)
@@ -272,17 +294,11 @@
 
 	memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
 
-	/* setup GPIOs */
-	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
 	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
 	saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
 
-	/* Reset the card */
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
-	msleep(50);
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
-	msleep(100);
-
 	/* Enable DEBI pins */
 	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
 
@@ -297,13 +313,14 @@
 	budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
 	budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
 	budget_av->ca.data = budget_av;
-	if ((result = dvb_ca_en50221_init(budget_av->budget.dvb_adapter,
+
+	if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
 					  &budget_av->ca, 0, 1)) != 0) {
-		printk("budget_av: CI interface detected, but initialisation failed.\n");
+		printk(KERN_ERR "budget-av: ci initialisation failed.\n");
 		goto error;
 	}
-	// success!
-	printk("ciintf_init: CI interface initialised\n");
+
+	printk(KERN_INFO "budget-av: ci interface initialised.\n");
 	budget_av->budget.ci_present = 1;
 	return 0;
 
@@ -361,8 +378,12 @@
 static int saa7113_init(struct budget_av *budget_av)
 {
 	struct budget *budget = &budget_av->budget;
+	struct saa7146_dev *saa = budget->dev;
 	const u8 *data = saa7113_tab;
 
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+	msleep(200);
+
 	if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
 		dprintk(1, "saa7113 not found on KNC card\n");
 		return -ENODEV;
@@ -697,75 +718,90 @@
 	return pwm;
 }
 
+#define SUBID_DVBS_KNC1		0x0010
+#define SUBID_DVBS_KNC1_PLUS	0x0011
+#define SUBID_DVBS_TYPHOON	0x4f56
+#define SUBID_DVBS_CINERGY1200	0x1154
+
+#define SUBID_DVBC_KNC1		0x0020
+#define SUBID_DVBC_KNC1_PLUS	0x0021
+#define SUBID_DVBC_CINERGY1200	0x1156
+
+#define SUBID_DVBT_KNC1_PLUS	0x0031
+#define SUBID_DVBT_KNC1		0x0030
+#define SUBID_DVBT_CINERGY1200	0x1157
 
 static void frontend_init(struct budget_av *budget_av)
 {
-	switch (budget_av->budget.dev->pci->subsystem_device) {
-	case 0x4f56:		// Typhoon/KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059))
-		budget_av->budget.dvb_frontend =
-			stv0299_attach(&typhoon_config, &budget_av->budget.i2c_adap);
-		if (budget_av->budget.dvb_frontend != NULL) {
+	struct saa7146_dev * saa = budget_av->budget.dev;
+	struct dvb_frontend * fe = NULL;
+
+	switch (saa->pci->subsystem_device) {
+		case SUBID_DVBS_KNC1_PLUS:
+		case SUBID_DVBC_KNC1_PLUS:
+		case SUBID_DVBT_KNC1_PLUS:
+			// Enable / PowerON Frontend
+			saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
 			break;
-		}
+	}
+
+	switch (saa->pci->subsystem_device) {
+
+	case SUBID_DVBS_KNC1:
+	case SUBID_DVBS_KNC1_PLUS:
+	case SUBID_DVBS_TYPHOON:
+		fe = stv0299_attach(&typhoon_config,
+				    &budget_av->budget.i2c_adap);
 		break;
 
-	case 0x0020:		// KNC1 DVB-C budget (tda10021/Philips CU1216(tua6034))
-		budget_av->budget.dvb_frontend =
-			tda10021_attach(&philips_cu1216_config,
-					&budget_av->budget.i2c_adap, read_pwm(budget_av));
-		if (budget_av->budget.dvb_frontend != NULL) {
-			break;
-		}
+	case SUBID_DVBS_CINERGY1200:
+		fe = stv0299_attach(&cinergy_1200s_config,
+				    &budget_av->budget.i2c_adap);
 		break;
 
-	case 0x0030:		// KNC1 DVB-T budget (tda10046/Philips TU1216(tda6651tt))
-		budget_av->budget.dvb_frontend =
-			tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
-		if (budget_av->budget.dvb_frontend != NULL) {
-			break;
-		}
+	case SUBID_DVBC_KNC1:
+	case SUBID_DVBC_KNC1_PLUS:
+		fe = tda10021_attach(&philips_cu1216_config,
+				     &budget_av->budget.i2c_adap,
+				     read_pwm(budget_av));
 		break;
 
-	case 0x1154:		// TerraTec Cinergy 1200 DVB-S (stv0299/Philips SU1278(tsa5059))
-		budget_av->budget.dvb_frontend =
-			stv0299_attach(&cinergy_1200s_config, &budget_av->budget.i2c_adap);
-		if (budget_av->budget.dvb_frontend != NULL) {
-			break;
-		}
+	case SUBID_DVBT_KNC1:
+	case SUBID_DVBT_KNC1_PLUS:
+		fe = tda10046_attach(&philips_tu1216_config,
+				     &budget_av->budget.i2c_adap);
 		break;
 
-	case 0x1156:		// Terratec Cinergy 1200 DVB-C (tda10021/Philips CU1216(tua6034))
-		budget_av->budget.dvb_frontend =
-			tda10021_attach(&philips_cu1216_config,
-					&budget_av->budget.i2c_adap, read_pwm(budget_av));
-		if (budget_av->budget.dvb_frontend) {
-			break;
-		}
+	case SUBID_DVBC_CINERGY1200:
+		fe = tda10021_attach(&philips_cu1216_config,
+				     &budget_av->budget.i2c_adap,
+				     read_pwm(budget_av));
 		break;
 
-	case 0x1157:		// Terratec Cinergy 1200 DVB-T (tda10046/Philips TU1216(tda6651tt))
-		budget_av->budget.dvb_frontend =
-			tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
-		if (budget_av->budget.dvb_frontend) {
-			break;
-		}
+	case SUBID_DVBT_CINERGY1200:
+		fe = tda10046_attach(&philips_tu1216_config,
+				     &budget_av->budget.i2c_adap);
 		break;
 	}
 
-	if (budget_av->budget.dvb_frontend == NULL) {
-		printk("budget_av: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
-		       budget_av->budget.dev->pci->vendor,
-		       budget_av->budget.dev->pci->device,
-		       budget_av->budget.dev->pci->subsystem_vendor,
-		       budget_av->budget.dev->pci->subsystem_device);
-	} else {
-		if (dvb_register_frontend
-		    (budget_av->budget.dvb_adapter, budget_av->budget.dvb_frontend)) {
-			printk("budget-av: Frontend registration failed!\n");
-			if (budget_av->budget.dvb_frontend->ops->release)
-				budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
-			budget_av->budget.dvb_frontend = NULL;
-		}
+	if (fe == NULL) {
+		printk(KERN_ERR "budget-av: A frontend driver was not found "
+				"for device %04x/%04x subsystem %04x/%04x\n",
+		       saa->pci->vendor,
+		       saa->pci->device,
+		       saa->pci->subsystem_vendor,
+		       saa->pci->subsystem_device);
+		return;
+	}
+
+	budget_av->budget.dvb_frontend = fe;
+
+	if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
+				  budget_av->budget.dvb_frontend)) {
+		printk(KERN_ERR "budget-av: Frontend registration failed!\n");
+		if (budget_av->budget.dvb_frontend->ops->release)
+			budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
+		budget_av->budget.dvb_frontend = NULL;
 	}
 }
 
@@ -822,6 +858,7 @@
 
 	memset(budget_av, 0, sizeof(struct budget_av));
 
+	budget_av->has_saa7113 = 0;
 	budget_av->budget.ci_present = 0;
 
 	dev->ext_priv = budget_av;
@@ -836,10 +873,7 @@
 	saa7146_write(dev, DD1_INIT, 0x07000600);
 	saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
 
-	saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI);
-	msleep(500);
-
-	if (0 == saa7113_init(budget_av)) {
+	if (saa7113_init(budget_av) == 0) {
 		budget_av->has_saa7113 = 1;
 
 		if (0 != saa7146_vv_init(dev, &vv_data)) {
@@ -860,31 +894,26 @@
 
 		saa7113_setinput(budget_av, 0);
 	} else {
-		budget_av->has_saa7113 = 0;
-
-		saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+		ciintf_init(budget_av);
 	}
 
 	/* fixme: find some sane values here... */
 	saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
 
-	mac = budget_av->budget.dvb_adapter->proposed_mac;
+	mac = budget_av->budget.dvb_adapter.proposed_mac;
 	if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
-		printk("KNC1-%d: Could not read MAC from KNC1 card\n",
-		       budget_av->budget.dvb_adapter->num);
+		printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n",
+		       budget_av->budget.dvb_adapter.num);
 		memset(mac, 0, 6);
 	} else {
-		printk("KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-		       budget_av->budget.dvb_adapter->num,
+		printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+		       budget_av->budget.dvb_adapter.num,
 		       mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
 	}
 
-	budget_av->budget.dvb_adapter->priv = budget_av;
+	budget_av->budget.dvb_adapter.priv = budget_av;
 	frontend_init(budget_av);
 
-	if (enable_ci)
-		ciintf_init(budget_av);
-
 	return 0;
 }
 
@@ -963,14 +992,21 @@
 MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
 MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
 MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
+MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
 MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
 MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
 MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
 
 static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
+	MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
+	MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
 	MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
+	MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
 	MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
+	MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
 	MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
 	MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
 	MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
@@ -1010,5 +1046,3 @@
 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
 MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
 		   "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
-module_param_named(enable_ci, enable_ci, int, 0644);
-MODULE_PARM_DESC(enable_ci, "Turn on/off CI module (default:off).");
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 521111be..dce1161 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -395,7 +395,7 @@
 	budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
 	budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
 	budget_ci->ca.data = budget_ci;
-	if ((result = dvb_ca_en50221_init(budget_ci->budget.dvb_adapter,
+	if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
 					  &budget_ci->ca,
 					  DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
 					  DVB_CA_EN50221_FLAG_IRQ_FR |
@@ -881,7 +881,7 @@
 		       budget_ci->budget.dev->pci->subsystem_device);
 	} else {
 		if (dvb_register_frontend
-		    (budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) {
+		    (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) {
 			printk("budget-ci: Frontend registration failed!\n");
 			if (budget_ci->budget.dvb_frontend->ops->release)
 				budget_ci->budget.dvb_frontend->ops->release(budget_ci->budget.dvb_frontend);
@@ -916,7 +916,7 @@
 
 	ciintf_init(budget_ci);
 
-	budget_ci->budget.dvb_adapter->priv = budget_ci;
+	budget_ci->budget.dvb_adapter.priv = budget_ci;
 	frontend_init(budget_ci);
 
 	return 0;
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index 93a9b40..0498a05 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -298,7 +298,7 @@
 	budget->dmxdev.demux = &dvbdemux->dmx;
 	budget->dmxdev.capabilities = 0;
 
-	dvb_dmxdev_init(&budget->dmxdev, budget->dvb_adapter);
+	dvb_dmxdev_init(&budget->dmxdev, &budget->dvb_adapter);
 
 	budget->hw_frontend.source = DMX_FRONTEND_0;
 
@@ -316,7 +316,7 @@
 	if (ret < 0)
 		return ret;
 
-	dvb_net_init(budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx);
+	dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx);
 
 	return 0;
 }
@@ -385,11 +385,11 @@
 	strcpy(budget->i2c_adap.name, budget->card->name);
 
 	if (i2c_add_adapter(&budget->i2c_adap) < 0) {
-		dvb_unregister_adapter(budget->dvb_adapter);
+		dvb_unregister_adapter(&budget->dvb_adapter);
 		return -ENOMEM;
 	}
 
-	ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter->proposed_mac);
+	ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac);
 
 	if (NULL ==
 	    (budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, length, &budget->pt))) {
@@ -417,7 +417,7 @@
 
 	vfree(budget->grabbing);
 
-	dvb_unregister_adapter(budget->dvb_adapter);
+	dvb_unregister_adapter(&budget->dvb_adapter);
 
 	return ret;
 }
@@ -432,7 +432,7 @@
 
 	i2c_del_adapter(&budget->i2c_adap);
 
-	dvb_unregister_adapter(budget->dvb_adapter);
+	dvb_unregister_adapter(&budget->dvb_adapter);
 
 	tasklet_kill(&budget->vpe_tasklet);
 
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 5d524a4..8142e26 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -453,7 +453,7 @@
 		       budget->dev->pci->subsystem_vendor,
 		       budget->dev->pci->subsystem_device);
 	} else {
-		if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) {
+		if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) {
 			printk("budget-av: Frontend registration failed!\n");
 			if (budget->dvb_frontend->ops->release)
 				budget->dvb_frontend->ops->release(budget->dvb_frontend);
@@ -702,7 +702,7 @@
 
         dev->ext_priv = budget;
 
-	budget->dvb_adapter->priv = budget;
+	budget->dvb_adapter.priv = budget;
 	frontend_init(budget);
 
         return 0;
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 5e6a10f..083fd44 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -468,7 +468,7 @@
 		       budget->dev->pci->subsystem_vendor,
 		       budget->dev->pci->subsystem_device);
 	} else {
-		if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) {
+		if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) {
 			printk("budget: Frontend registration failed!\n");
 			if (budget->dvb_frontend->ops->release)
 				budget->dvb_frontend->ops->release(budget->dvb_frontend);
@@ -497,7 +497,7 @@
 		return err;
 	}
 
-	budget->dvb_adapter->priv = budget;
+	budget->dvb_adapter.priv = budget;
 	frontend_init(budget);
 
 	return 0;
diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h
index 10bd41f..c6ef496b 100644
--- a/drivers/media/dvb/ttpci/budget.h
+++ b/drivers/media/dvb/ttpci/budget.h
@@ -64,7 +64,7 @@
 
 	spinlock_t debilock;
 
-	struct dvb_adapter *dvb_adapter;
+	struct dvb_adapter dvb_adapter;
 	struct dvb_frontend *dvb_frontend;
 	void *priv;
 };
@@ -92,6 +92,9 @@
 #define BUDGET_KNC1S		   8
 #define BUDGET_KNC1C		   9
 #define BUDGET_KNC1T		   10
+#define BUDGET_KNC1SP		   11
+#define BUDGET_KNC1CP		   12
+#define BUDGET_KNC1TP		   13
 
 #define BUDGET_VIDEO_PORTA         0
 #define BUDGET_VIDEO_PORTB         1
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 4c046ec..afa0e7a 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -84,7 +84,7 @@
 	struct semaphore semi2c;
 	struct semaphore semusb;
 
-	struct dvb_adapter *adapter;
+	struct dvb_adapter adapter;
 	struct usb_device *dev;
 
 	struct i2c_adapter i2c_adap;
@@ -1065,7 +1065,7 @@
 	return 0;
 }
 
-struct cx22700_config alps_tdmb7_config = {
+static struct cx22700_config alps_tdmb7_config = {
 	.demod_address = 0x43,
 	.pll_set = alps_tdmb7_pll_set,
 };
@@ -1412,7 +1412,7 @@
 		       le16_to_cpu(ttusb->dev->descriptor.idVendor),
 		       le16_to_cpu(ttusb->dev->descriptor.idProduct));
 	} else {
-		if (dvb_register_frontend(ttusb->adapter, ttusb->fe)) {
+		if (dvb_register_frontend(&ttusb->adapter, ttusb->fe)) {
 			printk("dvb-ttusb-budget: Frontend registration failed!\n");
 			if (ttusb->fe->ops->release)
 				ttusb->fe->ops->release(ttusb->fe);
@@ -1462,7 +1462,7 @@
 	up(&ttusb->semi2c);
 
 	dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE);
-	ttusb->adapter->priv = ttusb;
+	ttusb->adapter.priv = ttusb;
 
 	/* i2c */
 	memset(&ttusb->i2c_adap, 0, sizeof(struct i2c_adapter));
@@ -1481,7 +1481,7 @@
 
 	result = i2c_add_adapter(&ttusb->i2c_adap);
 	if (result) {
-		dvb_unregister_adapter (ttusb->adapter);
+		dvb_unregister_adapter (&ttusb->adapter);
 		return result;
 	}
 
@@ -1503,7 +1503,7 @@
 	if ((result = dvb_dmx_init(&ttusb->dvb_demux)) < 0) {
 		printk("ttusb_dvb: dvb_dmx_init failed (errno = %d)\n", result);
 		i2c_del_adapter(&ttusb->i2c_adap);
-		dvb_unregister_adapter (ttusb->adapter);
+		dvb_unregister_adapter (&ttusb->adapter);
 		return -ENODEV;
 	}
 //FIXME dmxdev (nur WAS?)
@@ -1511,21 +1511,21 @@
 	ttusb->dmxdev.demux = &ttusb->dvb_demux.dmx;
 	ttusb->dmxdev.capabilities = 0;
 
-	if ((result = dvb_dmxdev_init(&ttusb->dmxdev, ttusb->adapter)) < 0) {
+	if ((result = dvb_dmxdev_init(&ttusb->dmxdev, &ttusb->adapter)) < 0) {
 		printk("ttusb_dvb: dvb_dmxdev_init failed (errno = %d)\n",
 		       result);
 		dvb_dmx_release(&ttusb->dvb_demux);
 		i2c_del_adapter(&ttusb->i2c_adap);
-		dvb_unregister_adapter (ttusb->adapter);
+		dvb_unregister_adapter (&ttusb->adapter);
 		return -ENODEV;
 	}
 
-	if (dvb_net_init(ttusb->adapter, &ttusb->dvbnet, &ttusb->dvb_demux.dmx)) {
+	if (dvb_net_init(&ttusb->adapter, &ttusb->dvbnet, &ttusb->dvb_demux.dmx)) {
 		printk("ttusb_dvb: dvb_net_init failed!\n");
 		dvb_dmxdev_release(&ttusb->dmxdev);
 		dvb_dmx_release(&ttusb->dvb_demux);
 		i2c_del_adapter(&ttusb->i2c_adap);
-		dvb_unregister_adapter (ttusb->adapter);
+		dvb_unregister_adapter (&ttusb->adapter);
 		return -ENODEV;
 	}
 
@@ -1559,7 +1559,7 @@
 	dvb_dmx_release(&ttusb->dvb_demux);
 	if (ttusb->fe != NULL) dvb_unregister_frontend(ttusb->fe);
 	i2c_del_adapter(&ttusb->i2c_adap);
-	dvb_unregister_adapter(ttusb->adapter);
+	dvb_unregister_adapter(&ttusb->adapter);
 
 	ttusb_free_iso_urbs(ttusb);
 
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 64e771bd..505bdaf 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -98,7 +98,7 @@
 	int				can_playback;
 
 	/* DVB bits */
-	struct dvb_adapter		*adapter;
+	struct dvb_adapter		adapter;
 	struct dmxdev			dmxdev;
 	struct dvb_demux		demux;
 	struct dmx_frontend		frontend;
@@ -1435,7 +1435,7 @@
 		printk("%s: dvb_dmx_init failed: error %d\n", __FUNCTION__,
 		       result);
 
-		dvb_unregister_adapter(dec->adapter);
+		dvb_unregister_adapter(&dec->adapter);
 
 		return result;
 	}
@@ -1444,12 +1444,12 @@
 	dec->dmxdev.demux = &dec->demux.dmx;
 	dec->dmxdev.capabilities = 0;
 
-	if ((result = dvb_dmxdev_init(&dec->dmxdev, dec->adapter)) < 0) {
+	if ((result = dvb_dmxdev_init(&dec->dmxdev, &dec->adapter)) < 0) {
 		printk("%s: dvb_dmxdev_init failed: error %d\n",
 		       __FUNCTION__, result);
 
 		dvb_dmx_release(&dec->demux);
-		dvb_unregister_adapter(dec->adapter);
+		dvb_unregister_adapter(&dec->adapter);
 
 		return result;
 	}
@@ -1463,7 +1463,7 @@
 
 		dvb_dmxdev_release(&dec->dmxdev);
 		dvb_dmx_release(&dec->demux);
-		dvb_unregister_adapter(dec->adapter);
+		dvb_unregister_adapter(&dec->adapter);
 
 		return result;
 	}
@@ -1476,12 +1476,12 @@
 		dec->demux.dmx.remove_frontend(&dec->demux.dmx, &dec->frontend);
 		dvb_dmxdev_release(&dec->dmxdev);
 		dvb_dmx_release(&dec->demux);
-		dvb_unregister_adapter(dec->adapter);
+		dvb_unregister_adapter(&dec->adapter);
 
 		return result;
 	}
 
-	dvb_net_init(dec->adapter, &dec->dvb_net, &dec->demux.dmx);
+	dvb_net_init(&dec->adapter, &dec->dvb_net, &dec->demux.dmx);
 
 	return 0;
 }
@@ -1496,7 +1496,7 @@
 	dvb_dmxdev_release(&dec->dmxdev);
 	dvb_dmx_release(&dec->demux);
 	if (dec->fe) dvb_unregister_frontend(dec->fe);
-	dvb_unregister_adapter(dec->adapter);
+	dvb_unregister_adapter(&dec->adapter);
 }
 
 static void ttusb_dec_exit_rc(struct ttusb_dec *dec)
@@ -1565,15 +1565,15 @@
 	}
 }
 
-int fe_send_command(struct dvb_frontend* fe, const u8 command,
-		    int param_length, const u8 params[],
-		    int *result_length, u8 cmd_result[])
+static int fe_send_command(struct dvb_frontend* fe, const u8 command,
+			   int param_length, const u8 params[],
+			   int *result_length, u8 cmd_result[])
 {
 	struct ttusb_dec* dec = (struct ttusb_dec*) fe->dvb->priv;
 	return ttusb_dec_send_command(dec, command, param_length, params, result_length, cmd_result);
 }
 
-struct ttusbdecfe_config fe_config = {
+static struct ttusbdecfe_config fe_config = {
 	.send_command = fe_send_command
 };
 
@@ -1620,7 +1620,7 @@
 	}
 	ttusb_dec_init_dvb(dec);
 
-	dec->adapter->priv = dec;
+	dec->adapter.priv = dec;
 	switch (le16_to_cpu(id->idProduct)) {
 	case 0x1006:
 		dec->fe = ttusbdecfe_dvbs_attach(&fe_config);
@@ -1637,7 +1637,7 @@
 		       le16_to_cpu(dec->udev->descriptor.idVendor),
 		       le16_to_cpu(dec->udev->descriptor.idProduct));
 	} else {
-		if (dvb_register_frontend(dec->adapter, dec->fe)) {
+		if (dvb_register_frontend(&dec->adapter, dec->fe)) {
 			printk("budget-ci: Frontend registration failed!\n");
 			if (dec->fe->ops->release)
 				dec->fe->ops->release(dec->fe);
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index d3dd422..6c05fdd 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -240,6 +240,7 @@
 	select VIDEO_BUF
 	select VIDEO_IR
 	select VIDEO_TUNER
+	select CRC32
 	---help---
 	  This is a video4linux driver for Philips SAA7130/7134 based
 	  TV cards.
diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c
index 85224b9..6334122 100644
--- a/drivers/media/video/bttv-cards.c
+++ b/drivers/media/video/bttv-cards.c
@@ -1946,7 +1946,6 @@
         .no_tda9875     = 1,
         .no_tda7432     = 1,
         .tuner_type     = TUNER_ABSENT,
-        .no_video       = 1,
 	.pll            = PLL_28,
 },{
 	.name           = "Teppro TEV-560/InterVision IV-560",
diff --git a/drivers/media/video/video-buf-dvb.c b/drivers/media/video/video-buf-dvb.c
index 31cc4ed..5f87007 100644
--- a/drivers/media/video/video-buf-dvb.c
+++ b/drivers/media/video/video-buf-dvb.c
@@ -149,10 +149,10 @@
 		       dvb->name, result);
 		goto fail_adapter;
 	}
-	dvb->adapter->priv = adapter_priv;
+	dvb->adapter.priv = adapter_priv;
 
 	/* register frontend */
-	result = dvb_register_frontend(dvb->adapter, dvb->frontend);
+	result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
 	if (result < 0) {
 		printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n",
 		       dvb->name, result);
@@ -178,7 +178,7 @@
 	dvb->dmxdev.filternum    = 256;
 	dvb->dmxdev.demux        = &dvb->demux.dmx;
 	dvb->dmxdev.capabilities = 0;
-	result = dvb_dmxdev_init(&dvb->dmxdev, dvb->adapter);
+	result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
 	if (result < 0) {
 		printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n",
 		       dvb->name, result);
@@ -209,7 +209,7 @@
 	}
 
 	/* register network adapter */
-	dvb_net_init(dvb->adapter, &dvb->net, &dvb->demux.dmx);
+	dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
 	return 0;
 
 fail_fe_conn:
@@ -223,7 +223,7 @@
 fail_dmx:
 	dvb_unregister_frontend(dvb->frontend);
 fail_frontend:
-	dvb_unregister_adapter(dvb->adapter);
+	dvb_unregister_adapter(&dvb->adapter);
 fail_adapter:
 	return result;
 }
@@ -236,7 +236,7 @@
 	dvb_dmxdev_release(&dvb->dmxdev);
 	dvb_dmx_release(&dvb->demux);
 	dvb_unregister_frontend(dvb->frontend);
-	dvb_unregister_adapter(dvb->adapter);
+	dvb_unregister_adapter(&dvb->adapter);
 }
 
 EXPORT_SYMBOL(videobuf_dvb_register);
diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
index 021d0f7..3903f8c 100644
--- a/drivers/pci/hotplug.c
+++ b/drivers/pci/hotplug.c
@@ -52,116 +52,17 @@
 	if ((buffer_size - length <= 0) || (i >= num_envp))
 		return -ENOMEM;
 
+	envp[i++] = scratch;
+	length += scnprintf (scratch, buffer_size - length,
+			    "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x\n",
+			    pdev->vendor, pdev->device,
+			    pdev->subsystem_vendor, pdev->subsystem_device,
+			    (u8)(pdev->class >> 16), (u8)(pdev->class >> 8),
+			    (u8)(pdev->class));
+	if ((buffer_size - length <= 0) || (i >= num_envp))
+		return -ENOMEM;
+
 	envp[i] = NULL;
 
 	return 0;
 }
-
-static int pci_visit_bus (struct pci_visit * fn, struct pci_bus_wrapped *wrapped_bus, struct pci_dev_wrapped *wrapped_parent)
-{
-	struct list_head *ln;
-	struct pci_dev *dev;
-	struct pci_dev_wrapped wrapped_dev;
-	int result = 0;
-
-	pr_debug("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(wrapped_bus->bus),
-		wrapped_bus->bus->number);
-
-	if (fn->pre_visit_pci_bus) {
-		result = fn->pre_visit_pci_bus(wrapped_bus, wrapped_parent);
-		if (result)
-			return result;
-	}
-
-	ln = wrapped_bus->bus->devices.next; 
-	while (ln != &wrapped_bus->bus->devices) {
-		dev = pci_dev_b(ln);
-		ln = ln->next;
-
-		memset(&wrapped_dev, 0, sizeof(struct pci_dev_wrapped));
-		wrapped_dev.dev = dev;
-
-		result = pci_visit_dev(fn, &wrapped_dev, wrapped_bus);
-		if (result)
-			return result;
-	}
-
-	if (fn->post_visit_pci_bus)
-		result = fn->post_visit_pci_bus(wrapped_bus, wrapped_parent);
-
-	return result;
-}
-
-static int pci_visit_bridge (struct pci_visit * fn,
-			     struct pci_dev_wrapped *wrapped_dev,
-			     struct pci_bus_wrapped *wrapped_parent)
-{
-	struct pci_bus *bus;
-	struct pci_bus_wrapped wrapped_bus;
-	int result = 0;
-
-	pr_debug("PCI: Scanning bridge %s\n", pci_name(wrapped_dev->dev));
-
-	if (fn->visit_pci_dev) {
-		result = fn->visit_pci_dev(wrapped_dev, wrapped_parent);
-		if (result)
-			return result;
-	}
-
-	bus = wrapped_dev->dev->subordinate;
-	if (bus) {
-		memset(&wrapped_bus, 0, sizeof(struct pci_bus_wrapped));
-		wrapped_bus.bus = bus;
-
-		result = pci_visit_bus(fn, &wrapped_bus, wrapped_dev);
-	}
-	return result;
-}
-
-/**
- * pci_visit_dev - scans the pci buses.
- * @fn: callback functions that are called while visiting
- * @wrapped_dev: the device to scan
- * @wrapped_parent: the bus where @wrapped_dev is connected to
- *
- * Every bus and every function is presented to a custom
- * function that can act upon it.
- */
-int pci_visit_dev(struct pci_visit *fn, struct pci_dev_wrapped *wrapped_dev,
-		  struct pci_bus_wrapped *wrapped_parent)
-{
-	struct pci_dev* dev = wrapped_dev ? wrapped_dev->dev : NULL;
-	int result = 0;
-
-	if (!dev)
-		return 0;
-
-	if (fn->pre_visit_pci_dev) {
-		result = fn->pre_visit_pci_dev(wrapped_dev, wrapped_parent);
-		if (result)
-			return result;
-	}
-
-	switch (dev->class >> 8) {
-		case PCI_CLASS_BRIDGE_PCI:
-			result = pci_visit_bridge(fn, wrapped_dev,
-						  wrapped_parent);
-			if (result)
-				return result;
-			break;
-		default:
-			pr_debug("PCI: Scanning device %s\n", pci_name(dev));
-			if (fn->visit_pci_dev) {
-				result = fn->visit_pci_dev (wrapped_dev,
-							    wrapped_parent);
-				if (result)
-					return result;
-			}
-	}
-
-	if (fn->post_visit_pci_dev)
-		result = fn->post_visit_pci_dev(wrapped_dev, wrapped_parent);
-
-	return result;
-}
-EXPORT_SYMBOL(pci_visit_dev);
diff --git a/drivers/pci/hotplug/cpci_hotplug.h b/drivers/pci/hotplug/cpci_hotplug.h
index 3ddd759..d9769b3 100644
--- a/drivers/pci/hotplug/cpci_hotplug.h
+++ b/drivers/pci/hotplug/cpci_hotplug.h
@@ -31,7 +31,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 
-/* PICMG 2.12 R2.0 HS CSR bits: */
+/* PICMG 2.1 R2.0 HS CSR bits: */
 #define HS_CSR_INS	0x0080
 #define HS_CSR_EXT	0x0040
 #define HS_CSR_PI	0x0030
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index ed24360..9e9dab7 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -33,11 +33,11 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/smp_lock.h>
+#include <asm/atomic.h>
 #include <linux/delay.h>
 #include "pci_hotplug.h"
 #include "cpci_hotplug.h"
 
-#define DRIVER_VERSION	"0.2"
 #define DRIVER_AUTHOR	"Scott Murray <scottm@somanetworks.com>"
 #define DRIVER_DESC	"CompactPCI Hot Plug Core"
 
@@ -54,9 +54,10 @@
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
 
 /* local variables */
-static spinlock_t list_lock;
+static DECLARE_RWSEM(list_rwsem);
 static LIST_HEAD(slot_list);
 static int slots;
+static atomic_t extracting;
 int cpci_debug;
 static struct cpci_hp_controller *controller;
 static struct semaphore event_semaphore;	/* mutex for process loop (up if something to process) */
@@ -68,6 +69,8 @@
 static int set_attention_status(struct hotplug_slot *slot, u8 value);
 static int get_power_status(struct hotplug_slot *slot, u8 * value);
 static int get_attention_status(struct hotplug_slot *slot, u8 * value);
+static int get_adapter_status(struct hotplug_slot *slot, u8 * value);
+static int get_latch_status(struct hotplug_slot *slot, u8 * value);
 
 static struct hotplug_slot_ops cpci_hotplug_slot_ops = {
 	.owner = THIS_MODULE,
@@ -76,6 +79,8 @@
 	.set_attention_status = set_attention_status,
 	.get_power_status = get_power_status,
 	.get_attention_status = get_attention_status,
+	.get_adapter_status = get_adapter_status,
+	.get_latch_status = get_latch_status,
 };
 
 static int
@@ -148,8 +153,10 @@
 		warn("failure to update adapter file");
 	}
 
-	slot->extracting = 0;
-
+	if(slot->extracting) {
+		slot->extracting = 0;
+		atomic_dec(&extracting);
+	}
 	return retval;
 }
 
@@ -188,6 +195,20 @@
 	return cpci_set_attention_status(hotplug_slot->private, status);
 }
 
+static int
+get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value)
+{
+	*value = hotplug_slot->info->adapter_status;
+	return 0;
+}
+
+static int
+get_latch_status(struct hotplug_slot *hotplug_slot, u8 * value)
+{
+	*value = hotplug_slot->info->latch_status;
+	return 0;
+}
+
 static void release_slot(struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = hotplug_slot->private;
@@ -273,10 +294,10 @@
 		}
 
 		/* Add slot to our internal list */
-		spin_lock(&list_lock);
+		down_write(&list_rwsem);
 		list_add(&slot->slot_list, &slot_list);
 		slots++;
-		spin_unlock(&list_lock);
+		up_write(&list_rwsem);
 	}
 	return 0;
 error_name:
@@ -299,9 +320,9 @@
 	struct list_head *next;
 	int status;
 
-	spin_lock(&list_lock);
+	down_write(&list_rwsem);
 	if(!slots) {
-		spin_unlock(&list_lock);
+		up_write(&list_rwsem);
 		return -1;
 	}
 	list_for_each_safe(tmp, next, &slot_list) {
@@ -319,7 +340,7 @@
 			slots--;
 		}
 	}
-	spin_unlock(&list_lock);
+	up_write(&list_rwsem);
 	return 0;
 }
 
@@ -347,7 +368,7 @@
 }
 
 /*
- * According to PICMG 2.12 R2.0, section 6.3.2, upon
+ * According to PICMG 2.1 R2.0, section 6.3.2, upon
  * initialization, the system driver shall clear the
  * INS bits of the cold-inserted devices.
  */
@@ -359,9 +380,9 @@
 	struct pci_dev* dev;
 
 	dbg("%s - enter", __FUNCTION__);
-	spin_lock(&list_lock);
+	down_read(&list_rwsem);
 	if(!slots) {
-		spin_unlock(&list_lock);
+		up_read(&list_rwsem);
 		return -1;
 	}
 	list_for_each(tmp, &slot_list) {
@@ -386,7 +407,7 @@
 			}
 		}
 	}
-	spin_unlock(&list_lock);
+	up_read(&list_rwsem);
 	dbg("%s - exit", __FUNCTION__);
 	return 0;
 }
@@ -398,10 +419,11 @@
 	struct list_head *tmp;
 	int extracted;
 	int inserted;
+	u16 hs_csr;
 
-	spin_lock(&list_lock);
+	down_read(&list_rwsem);
 	if(!slots) {
-		spin_unlock(&list_lock);
+		up_read(&list_rwsem);
 		err("no slots registered, shutting down");
 		return -1;
 	}
@@ -411,8 +433,6 @@
 		dbg("%s - looking at slot %s",
 		    __FUNCTION__, slot->hotplug_slot->name);
 		if(cpci_check_and_clear_ins(slot)) {
-			u16 hs_csr;
-
 			/* Some broken hardware (e.g. PLX 9054AB) asserts ENUM# twice... */
 			if(slot->dev) {
 				warn("slot %s already inserted", slot->hotplug_slot->name);
@@ -462,8 +482,6 @@
 
 			inserted++;
 		} else if(cpci_check_ext(slot)) {
-			u16 hs_csr;
-
 			/* Process extraction request */
 			dbg("%s - slot %s extracted",
 			    __FUNCTION__, slot->hotplug_slot->name);
@@ -476,20 +494,40 @@
 			if(!slot->extracting) {
 				if(update_latch_status(slot->hotplug_slot, 0)) {
 					warn("failure to update latch file");
+
 				}
+				atomic_inc(&extracting);
 				slot->extracting = 1;
 			}
 			extracted++;
+		} else if(slot->extracting) {
+			hs_csr = cpci_get_hs_csr(slot);
+			if(hs_csr == 0xffff) {
+				/*
+				 * Hmmm, we're likely hosed at this point, should we
+				 * bother trying to tell the driver or not?
+				 */
+				err("card in slot %s was improperly removed",
+				    slot->hotplug_slot->name);
+				if(update_adapter_status(slot->hotplug_slot, 0)) {
+					warn("failure to update adapter file");
+				}
+				slot->extracting = 0;
+				atomic_dec(&extracting);
+			}
 		}
 	}
-	spin_unlock(&list_lock);
+	up_read(&list_rwsem);
+	dbg("inserted=%d, extracted=%d, extracting=%d",
+	    inserted, extracted, atomic_read(&extracting));
 	if(inserted || extracted) {
 		return extracted;
 	}
-	else {
+	else if(!atomic_read(&extracting)) {
 		err("cannot find ENUM# source, shutting down");
 		return -1;
 	}
+	return 0;
 }
 
 /* This is the interrupt mode worker thread body */
@@ -497,8 +535,6 @@
 event_thread(void *data)
 {
 	int rc;
-	struct slot *slot;
-	struct list_head *tmp;
 
 	lock_kernel();
 	daemonize("cpci_hp_eventd");
@@ -512,39 +548,22 @@
 		    thread_finished);
 		if(thread_finished || signal_pending(current))
 			break;
-		while(controller->ops->query_enum()) {
+		do {
 			rc = check_slots();
-			if (rc > 0)
+			if (rc > 0) {
 				/* Give userspace a chance to handle extraction */
 				msleep(500);
-			else if (rc < 0) {
+			} else if (rc < 0) {
 				dbg("%s - error checking slots", __FUNCTION__);
 				thread_finished = 1;
 				break;
 			}
-		}
-		/* Check for someone yanking out a board */
-		list_for_each(tmp, &slot_list) {
-			slot = list_entry(tmp, struct slot, slot_list);
-			if(slot->extracting) {
-				/*
-				 * Hmmm, we're likely hosed at this point, should we
-				 * bother trying to tell the driver or not?
-				 */
-				err("card in slot %s was improperly removed",
-				    slot->hotplug_slot->name);
-				if(update_adapter_status(slot->hotplug_slot, 0)) {
-					warn("failure to update adapter file");
-				}
-				slot->extracting = 0;
-			}
-		}
+		} while(atomic_read(&extracting) != 0);
 
 		/* Re-enable ENUM# interrupt */
 		dbg("%s - re-enabling irq", __FUNCTION__);
 		controller->ops->enable_irq();
 	}
-
 	dbg("%s - event thread signals exit", __FUNCTION__);
 	up(&thread_exit);
 	return 0;
@@ -555,8 +574,6 @@
 poll_thread(void *data)
 {
 	int rc;
-	struct slot *slot;
-	struct list_head *tmp;
 
 	lock_kernel();
 	daemonize("cpci_hp_polld");
@@ -565,35 +582,19 @@
 	while(1) {
 		if(thread_finished || signal_pending(current))
 			break;
-
-		while(controller->ops->query_enum()) {
-			rc = check_slots();
-			if(rc > 0)
-				/* Give userspace a chance to handle extraction */
-				msleep(500);
-			else if (rc < 0) {
-				dbg("%s - error checking slots", __FUNCTION__);
-				thread_finished = 1;
-				break;
-			}
-		}
-		/* Check for someone yanking out a board */
-		list_for_each(tmp, &slot_list) {
-			slot = list_entry(tmp, struct slot, slot_list);
-			if(slot->extracting) {
-				/*
-				 * Hmmm, we're likely hosed at this point, should we
-				 * bother trying to tell the driver or not?
-				 */
-				err("card in slot %s was improperly removed",
-				    slot->hotplug_slot->name);
-				if(update_adapter_status(slot->hotplug_slot, 0)) {
-					warn("failure to update adapter file");
+		if(controller->ops->query_enum()) {
+			do {
+				rc = check_slots();
+				if(rc > 0) {
+					/* Give userspace a chance to handle extraction */
+					msleep(500);
+				} else if(rc < 0) {
+					dbg("%s - error checking slots", __FUNCTION__);
+					thread_finished = 1;
+					break;
 				}
-				slot->extracting = 0;
-			}
+			} while(atomic_read(&extracting) != 0);
 		}
-
 		msleep(100);
 	}
 	dbg("poll thread signals exit");
@@ -667,6 +668,9 @@
 	int status = 0;
 
 	if(controller) {
+		if(atomic_read(&extracting) != 0) {
+			return -EBUSY;
+		}
 		if(!thread_finished) {
 			cpci_stop_thread();
 		}
@@ -691,12 +695,12 @@
 		return -ENODEV;
 	}
 
-	spin_lock(&list_lock);
-	if(!slots) {
-		spin_unlock(&list_lock);
+	down_read(&list_rwsem);
+	if(list_empty(&slot_list)) {
+		up_read(&list_rwsem);
 		return -ENODEV;
 	}
-	spin_unlock(&list_lock);
+	up_read(&list_rwsem);
 
 	if(first) {
 		status = init_slots();
@@ -727,7 +731,9 @@
 	if(!controller) {
 		return -ENODEV;
 	}
-
+	if(atomic_read(&extracting) != 0) {
+		return -EBUSY;
+	}
 	if(controller->irq) {
 		/* Stop enum interrupt processing */
 		dbg("%s - disabling irq", __FUNCTION__);
@@ -747,7 +753,7 @@
 	 * Unregister all of our slots with the pci_hotplug subsystem,
 	 * and free up all memory that we had allocated.
 	 */
-	spin_lock(&list_lock);
+	down_write(&list_rwsem);
 	if(!slots) {
 		goto null_cleanup;
 	}
@@ -761,17 +767,14 @@
 		kfree(slot);
 	}
       null_cleanup:
-	spin_unlock(&list_lock);
+	up_write(&list_rwsem);
 	return;
 }
 
 int __init
 cpci_hotplug_init(int debug)
 {
-	spin_lock_init(&list_lock);
 	cpci_debug = debug;
-
-	info(DRIVER_DESC " version: " DRIVER_VERSION);
 	return 0;
 }
 
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index 2e96961..69eb4fc 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -32,11 +32,7 @@
 #include "pci_hotplug.h"
 #include "cpci_hotplug.h"
 
-#if !defined(MODULE)
 #define MY_NAME	"cpci_hotplug"
-#else
-#define MY_NAME	THIS_MODULE->name
-#endif
 
 extern int cpci_debug;
 
@@ -127,38 +123,6 @@
 	return hs_csr;
 }
 
-#if 0
-u16 cpci_set_hs_csr(struct slot* slot, u16 hs_csr)
-{
-	int hs_cap;
-	u16 new_hs_csr;
-
-	hs_cap = pci_bus_find_capability(slot->bus,
-					 slot->devfn,
-					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
-		return 0xFFFF;
-	}
-
-	/* Write out the new value */
-	if(pci_bus_write_config_word(slot->bus,
-				      slot->devfn,
-				      hs_cap + 2,
-				      hs_csr)) {
-		return 0xFFFF;
-	}
-
-	/* Read back what we just wrote out */
-	if(pci_bus_read_config_word(slot->bus,
-				     slot->devfn,
-				     hs_cap + 2,
-				     &new_hs_csr)) {
-		return 0xFFFF;
-	}
-	return new_hs_csr;
-}
-#endif
-
 int cpci_check_and_clear_ins(struct slot* slot)
 {
 	int hs_cap;
@@ -261,7 +225,6 @@
 		return -ENODEV;
 	}
 	if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
-		/* Set LOO */
 		hs_csr |= HS_CSR_LOO;
 		if(pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
@@ -293,7 +256,6 @@
 		return -ENODEV;
 	}
 	if(hs_csr & HS_CSR_LOO) {
-		/* Clear LOO */
 		hs_csr &= ~HS_CSR_LOO;
 		if(pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
@@ -312,257 +274,23 @@
  * Device configuration functions
  */
 
-static int cpci_configure_dev(struct pci_bus *bus, struct pci_dev *dev)
+static void cpci_enable_device(struct pci_dev *dev)
 {
-	u8 irq_pin;
-	int r;
+	struct pci_bus *bus;
 
-	dbg("%s - enter", __FUNCTION__);
-
-	/* NOTE: device already setup from prior scan */
-
-	/* FIXME: How would we know if we need to enable the expansion ROM? */
-	pci_write_config_word(dev, PCI_ROM_ADDRESS, 0x00L);
-
-	/* Assign resources */
-	dbg("assigning resources for %02x:%02x.%x",
-	    dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	for (r = 0; r < 6; r++) {
-		struct resource *res = dev->resource + r;
-		if(res->flags)
-			pci_assign_resource(dev, r);
-	}
-	dbg("finished assigning resources for %02x:%02x.%x",
-	    dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-
-	/* Does this function have an interrupt at all? */
-	dbg("checking for function interrupt");
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq_pin);
-	if(irq_pin) {
-		dbg("function uses interrupt pin %d", irq_pin);
-	}
-
-	/*
-	 * Need to explicitly set irq field to 0 so that it'll get assigned
-	 * by the pcibios platform dependent code called by pci_enable_device.
-	 */
-	dev->irq = 0;
-
-	dbg("enabling device");
-	pci_enable_device(dev);	/* XXX check return */
-	dbg("now dev->irq = %d", dev->irq);
-	if(irq_pin && dev->irq) {
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-
-	/* Can't use pci_insert_device at the moment, do it manually for now */
-	pci_proc_attach_device(dev);
-	dbg("notifying drivers");
-	//pci_announce_device_to_drivers(dev);
-	dbg("%s - exit", __FUNCTION__);
-	return 0;
-}
-
-static int cpci_configure_bridge(struct pci_bus* bus, struct pci_dev* dev)
-{
-	int rc;
-	struct pci_bus* child;
-	struct resource* r;
-	u8 max, n;
-	u16 command;
-
-	dbg("%s - enter", __FUNCTION__);
-
-	/* Do basic bridge initialization */
-	rc = pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
-	if(rc) {
-		printk(KERN_ERR "%s - write of PCI_LATENCY_TIMER failed\n", __FUNCTION__);
-	}
-	rc = pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40);
-	if(rc) {
-		printk(KERN_ERR "%s - write of PCI_SEC_LATENCY_TIMER failed\n", __FUNCTION__);
-	}
-	rc = pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES / 4);
-	if(rc) {
-		printk(KERN_ERR "%s - write of PCI_CACHE_LINE_SIZE failed\n", __FUNCTION__);
-	}
-
-	/*
-	 * Set parent bridge's subordinate field so that configuration space
-	 * access will work in pci_scan_bridge and friends.
-	 */
-	max = pci_max_busnr();
-	bus->subordinate = max + 1;
-	pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, max + 1);
-
-	/* Scan behind bridge */
-	n = pci_scan_bridge(bus, dev, max, 2);
-	child = pci_find_bus(0, max + 1);
-	if (!child)
-		return -ENODEV;
-	pci_proc_attach_bus(child);
-
-	/*
-	 * Update parent bridge's subordinate field if there were more bridges
-	 * behind the bridge that was scanned.
-	 */
-	if(n > max) {
-		bus->subordinate = n;
-		pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, n);
-	}
-
-	/*
-	 * Update the bridge resources of the bridge to accommodate devices
-	 * behind it.
-	 */
-	pci_bus_size_bridges(child);
-	pci_bus_assign_resources(child);
-
-	/* Enable resource mapping via command register */
-	command = PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	r = child->resource[0];
-	if(r && r->start) {
-		command |= PCI_COMMAND_IO;
-	}
-	r = child->resource[1];
-	if(r && r->start) {
-		command |= PCI_COMMAND_MEMORY;
-	}
-	r = child->resource[2];
-	if(r && r->start) {
-		command |= PCI_COMMAND_MEMORY;
-	}
-	rc = pci_write_config_word(dev, PCI_COMMAND, command);
-	if(rc) {
-		err("Error setting command register");
-		return rc;
-	}
-
-	/* Set bridge control register */
-	command = PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR | PCI_BRIDGE_CTL_NO_ISA;
-	rc = pci_write_config_word(dev, PCI_BRIDGE_CONTROL, command);
-	if(rc) {
-		err("Error setting bridge control register");
-		return rc;
-	}
-	dbg("%s - exit", __FUNCTION__);
-	return 0;
-}
-
-static int configure_visit_pci_dev(struct pci_dev_wrapped *wrapped_dev,
-				   struct pci_bus_wrapped *wrapped_bus)
-{
-	int rc;
-	struct pci_dev *dev = wrapped_dev->dev;
-	struct pci_bus *bus = wrapped_bus->bus;
-	struct slot* slot;
-
-	dbg("%s - enter", __FUNCTION__);
-
-	/*
-	 * We need to fix up the hotplug representation with the Linux
-	 * representation.
-	 */
-	if(wrapped_dev->data) {
-		slot = (struct slot*) wrapped_dev->data;
-		slot->dev = dev;
-	}
-
-	/* If it's a bridge, scan behind it for devices */
+	pci_enable_device(dev);
 	if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		rc = cpci_configure_bridge(bus, dev);
-		if(rc)
-			return rc;
-	}
-
-	/* Actually configure device */
-	if(dev) {
-		rc = cpci_configure_dev(bus, dev);
-		if(rc)
-			return rc;
-	}
-	dbg("%s - exit", __FUNCTION__);
-	return 0;
-}
-
-static int unconfigure_visit_pci_dev_phase2(struct pci_dev_wrapped *wrapped_dev,
-					    struct pci_bus_wrapped *wrapped_bus)
-{
-	struct pci_dev *dev = wrapped_dev->dev;
-	struct slot* slot;
-
-	dbg("%s - enter", __FUNCTION__);
-	if(!dev)
-		return -ENODEV;
-
-	/* Remove the Linux representation */
-	if(pci_remove_device_safe(dev)) {
-		err("Could not remove device\n");
-		return -1;
-	}
-
-	/*
-	 * Now remove the hotplug representation.
-	 */
-	if(wrapped_dev->data) {
-		slot = (struct slot*) wrapped_dev->data;
-		slot->dev = NULL;
-	} else {
-		dbg("No hotplug representation for %02x:%02x.%x",
-		    dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	}
-	dbg("%s - exit", __FUNCTION__);
-	return 0;
-}
-
-static int unconfigure_visit_pci_bus_phase2(struct pci_bus_wrapped *wrapped_bus,
-					    struct pci_dev_wrapped *wrapped_dev)
-{
-	struct pci_bus *bus = wrapped_bus->bus;
-	struct pci_bus *parent = bus->self->bus;
-
-	dbg("%s - enter", __FUNCTION__);
-
-	/* The cleanup code for proc entries regarding buses should be in the kernel... */
-	if(bus->procdir)
-		dbg("detach_pci_bus %s", bus->procdir->name);
-	pci_proc_detach_bus(bus);
-
-	/* The cleanup code should live in the kernel... */
-	bus->self->subordinate = NULL;
-
-	/* unlink from parent bus */
-	list_del(&bus->node);
-
-	/* Now, remove */
-	if(bus)
-		kfree(bus);
-
-	/* Update parent's subordinate field */
-	if(parent) {
-		u8 n = pci_bus_max_busnr(parent);
-		if(n < parent->subordinate) {
-			parent->subordinate = n;
-			pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, n);
+		bus = dev->subordinate;
+		list_for_each_entry(dev, &bus->devices, bus_list) {
+			cpci_enable_device(dev);
 		}
 	}
-	dbg("%s - exit", __FUNCTION__);
-	return 0;
 }
 
-static struct pci_visit configure_functions = {
-	.visit_pci_dev = configure_visit_pci_dev,
-};
-
-static struct pci_visit unconfigure_functions_phase2 = {
-	.post_visit_pci_bus = unconfigure_visit_pci_bus_phase2,
-	.post_visit_pci_dev = unconfigure_visit_pci_dev_phase2
-};
-
-
 int cpci_configure_slot(struct slot* slot)
 {
-	int rc = 0;
+	unsigned char busnr;
+	struct pci_bus *child;
 
 	dbg("%s - enter", __FUNCTION__);
 
@@ -588,74 +316,44 @@
 		slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
 		if(slot->dev == NULL) {
 			err("Could not find PCI device for slot %02x", slot->number);
-			return 0;
-		}
-	}
-	dbg("slot->dev = %p", slot->dev);
-	if(slot->dev) {
-		struct pci_dev *dev;
-		struct pci_dev_wrapped wrapped_dev;
-		struct pci_bus_wrapped wrapped_bus;
-		int i;
-
-		memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped));
-		memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped));
-
-		for (i = 0; i < 8; i++) {
-			dev = pci_find_slot(slot->bus->number,
-					    PCI_DEVFN(PCI_SLOT(slot->dev->devfn), i));
-			if(!dev)
-				continue;
-			wrapped_dev.dev = dev;
-			wrapped_bus.bus = slot->dev->bus;
-			if(i)
-				wrapped_dev.data = NULL;
-			else
-				wrapped_dev.data = (void*) slot;
-			rc = pci_visit_dev(&configure_functions, &wrapped_dev, &wrapped_bus);
+			return 1;
 		}
 	}
 
-	dbg("%s - exit, rc = %d", __FUNCTION__, rc);
-	return rc;
+	if (slot->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+		pci_read_config_byte(slot->dev, PCI_SECONDARY_BUS, &busnr);
+		child = pci_add_new_bus(slot->dev->bus, slot->dev, busnr);
+		pci_do_scan_bus(child);
+		pci_bus_size_bridges(child);
+	}
+
+	pci_bus_assign_resources(slot->dev->bus);
+
+	cpci_enable_device(slot->dev);
+
+	dbg("%s - exit", __FUNCTION__);
+	return 0;
 }
 
 int cpci_unconfigure_slot(struct slot* slot)
 {
-	int rc = 0;
 	int i;
-	struct pci_dev_wrapped wrapped_dev;
-	struct pci_bus_wrapped wrapped_bus;
 	struct pci_dev *dev;
 
 	dbg("%s - enter", __FUNCTION__);
-
 	if(!slot->dev) {
 		err("No device for slot %02x\n", slot->number);
 		return -ENODEV;
 	}
 
-	memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped));
-	memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped));
-
 	for (i = 0; i < 8; i++) {
 		dev = pci_find_slot(slot->bus->number,
 				    PCI_DEVFN(PCI_SLOT(slot->devfn), i));
 		if(dev) {
-			wrapped_dev.dev = dev;
-			wrapped_bus.bus = dev->bus;
- 			if(i)
- 				wrapped_dev.data = NULL;
- 			else
- 				wrapped_dev.data = (void*) slot;
-			dbg("%s - unconfigure phase 2", __FUNCTION__);
-			rc = pci_visit_dev(&unconfigure_functions_phase2,
-					   &wrapped_dev,
-					   &wrapped_bus);
-			if(rc)
-				break;
+			pci_remove_bus_device(dev);
+			slot->dev = NULL;
 		}
 	}
-	dbg("%s - exit, rc = %d", __FUNCTION__, rc);
-	return rc;
+	dbg("%s - exit", __FUNCTION__);
+	return 0;
 }
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index f313121..46b294a 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -130,6 +130,7 @@
 	u8 slot_bus;		/* Bus where the slots handled by this controller sit */
 	u8 ctrlcap;
 	u16 vendor_id;
+	u8 cap_base;
 };
 
 struct irq_mapping {
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index ed1fd8d..df4915d 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -607,7 +607,7 @@
 static struct pcie_port_service_id port_pci_ids[] = { { 
 	.vendor = PCI_ANY_ID, 
 	.device = PCI_ANY_ID,
-	.port_type = PCIE_RC_PORT, 
+	.port_type = PCIE_ANY_PORT,
 	.service_type = PCIE_PORT_SERVICE_HP,
 	.driver_data =	0, 
 	}, { /* end: all zeroes */ }
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 9e70c46..1cda30b 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -109,20 +109,20 @@
 };
 static int pcie_cap_base = 0;		/* Base of the PCI Express capability item structure */ 
 
-#define PCIE_CAP_ID	( pcie_cap_base + PCIECAPID )
-#define NXT_CAP_PTR	( pcie_cap_base + NXTCAPPTR )
-#define CAP_REG		( pcie_cap_base + CAPREG )
-#define DEV_CAP		( pcie_cap_base + DEVCAP )
-#define DEV_CTRL	( pcie_cap_base + DEVCTRL )
-#define DEV_STATUS	( pcie_cap_base + DEVSTATUS )
-#define LNK_CAP		( pcie_cap_base + LNKCAP )
-#define LNK_CTRL	( pcie_cap_base + LNKCTRL )
-#define LNK_STATUS	( pcie_cap_base + LNKSTATUS )
-#define SLOT_CAP	( pcie_cap_base + SLOTCAP )
-#define SLOT_CTRL	( pcie_cap_base + SLOTCTRL )
-#define SLOT_STATUS	( pcie_cap_base + SLOTSTATUS )
-#define ROOT_CTRL	( pcie_cap_base + ROOTCTRL )
-#define ROOT_STATUS	( pcie_cap_base + ROOTSTATUS )
+#define PCIE_CAP_ID(cb)	( cb + PCIECAPID )
+#define NXT_CAP_PTR(cb)	( cb + NXTCAPPTR )
+#define CAP_REG(cb)	( cb + CAPREG )
+#define DEV_CAP(cb)	( cb + DEVCAP )
+#define DEV_CTRL(cb)	( cb + DEVCTRL )
+#define DEV_STATUS(cb)	( cb + DEVSTATUS )
+#define LNK_CAP(cb)	( cb + LNKCAP )
+#define LNK_CTRL(cb)	( cb + LNKCTRL )
+#define LNK_STATUS(cb)	( cb + LNKSTATUS )
+#define SLOT_CAP(cb)	( cb + SLOTCAP )
+#define SLOT_CTRL(cb)	( cb + SLOTCTRL )
+#define SLOT_STATUS(cb)	( cb + SLOTSTATUS )
+#define ROOT_CTRL(cb)	( cb + ROOTCTRL )
+#define ROOT_STATUS(cb)	( cb + ROOTSTATUS )
 
 #define hp_register_read_word(pdev, reg , value)		\
 	pci_read_config_word(pdev, reg, &value)
@@ -303,7 +303,7 @@
 		return -1;
 	}
 
-	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
 	if (retval) {
 			err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
 			return retval;
@@ -317,7 +317,7 @@
 	}
 
 	dbg("%s: Before hp_register_write_word SLOT_CTRL %x\n", __FUNCTION__, cmd);
-	retval = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL, cmd | CMD_CMPL_INTR_ENABLE);
+	retval = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), cmd | CMD_CMPL_INTR_ENABLE);
 	if (retval) {
 		err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
 		return retval;
@@ -342,7 +342,7 @@
 		return -1;
 	}
 	
-	retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS, lnk_status);
+	retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(ctrl->cap_base), lnk_status);
 
 	if (retval) {
 		err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__);
@@ -376,14 +376,14 @@
 		return -1;
 	}
 
-	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
 
 	if (retval) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
 		return retval;
 	}
 
-	dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__,SLOT_CTRL, slot_ctrl);
+	dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__,SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
 
 	atten_led_state = (slot_ctrl & ATTN_LED_CTRL) >> 6;
 
@@ -423,13 +423,13 @@
 		return -1;
 	}
 
-	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
 
 	if (retval) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
 		return retval;
 	}
-	dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL, slot_ctrl);
+	dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
 
 	pwr_state = (slot_ctrl & PWR_CTRL) >> 10;
 
@@ -463,7 +463,7 @@
 		return -1;
 	}
 
-	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
 
 	if (retval) {
 		err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
@@ -490,7 +490,7 @@
 		return -1;
 	}
 
-	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
 
 	if (retval) {
 		err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
@@ -518,7 +518,7 @@
 		return -1;
 	}
 
-	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
 
 	if (retval) {
 		err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
@@ -549,7 +549,7 @@
 		err("%s: Invalid HPC slot number!\n", __FUNCTION__);
 		return -1;
 	}
-	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
 
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
@@ -574,7 +574,7 @@
 		slot_cmd = slot_cmd | HP_INTR_ENABLE; 
 
 	pcie_write_cmd(slot, slot_cmd);
-	dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL, slot_cmd);
+	dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
 	
 	return rc;
 }
@@ -598,7 +598,7 @@
 		return ;
 	}
 
-	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
 
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
@@ -611,7 +611,7 @@
 
 	pcie_write_cmd(slot, slot_cmd);
 
-	dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd);
+	dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
 	return;
 }
 
@@ -633,7 +633,7 @@
 		return ;
 	}
 
-	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
 
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
@@ -646,7 +646,7 @@
 	if (!pciehp_poll_mode)
 		slot_cmd = slot_cmd | HP_INTR_ENABLE; 
 	pcie_write_cmd(slot, slot_cmd);
-	dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL, slot_cmd);
+	dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
 
 	return;
 }
@@ -669,7 +669,7 @@
 		return ;
 	}
 
-	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
 
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
@@ -683,7 +683,7 @@
 		slot_cmd = slot_cmd | HP_INTR_ENABLE; 
 	pcie_write_cmd(slot, slot_cmd);
 
-	dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd);
+	dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
 	return;
 }
 
@@ -707,7 +707,7 @@
 	*first_device_num = 0;
 	*num_ctlr_slots = 1; 
 
-	rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP, slot_cap);
+	rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP(ctrl->cap_base), slot_cap);
 
 	if (rc) {
 		err("%s : hp_register_read_dword SLOT_CAP failed\n", __FUNCTION__);
@@ -793,13 +793,13 @@
 		return -1;
 	}
 
-	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
 
 	if (retval) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
 		return retval;
 	}
-	dbg("%s: SLOT_CTRL %x, value read %xn", __FUNCTION__, SLOT_CTRL, 
+	dbg("%s: SLOT_CTRL %x, value read %xn", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base),
 		slot_ctrl);
 
 	slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_ON;
@@ -813,7 +813,7 @@
 		err("%s: Write %x command failed!\n", __FUNCTION__, slot_cmd);
 		return -1;
 	}
-	dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd);
+	dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
 
 	DBG_LEAVE_ROUTINE
 
@@ -842,13 +842,13 @@
 		err("%s: Invalid HPC slot number!\n", __FUNCTION__);
 		return -1;
 	}
-	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+	retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
 
 	if (retval) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
 		return retval;
 	}
-	dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__, SLOT_CTRL, 
+	dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base),
 		slot_ctrl);
 
 	slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_OFF;
@@ -862,7 +862,7 @@
 		err("%s: Write command failed!\n", __FUNCTION__);
 		return -1;
 	}
-	dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd);
+	dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
 
 	DBG_LEAVE_ROUTINE
 
@@ -900,7 +900,7 @@
 		return IRQ_NONE;
 	}
 
-	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
 		return IRQ_NONE;
@@ -918,7 +918,7 @@
 	dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc);
 	/* Mask Hot-plug Interrupt Enable */
 	if (!pciehp_poll_mode) {
-		rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word);
+		rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
 		if (rc) {
 			err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
 			return IRQ_NONE;
@@ -928,14 +928,14 @@
 		dbg("%s: hp_register_read_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word);
 		temp_word = (temp_word & ~HP_INTR_ENABLE & ~CMD_CMPL_INTR_ENABLE) | 0x00;
 
-		rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word);
+		rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
 		if (rc) {
 			err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
 			return IRQ_NONE;
 		}
 		dbg("%s: hp_register_write_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word);
 		
-		rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+		rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
 		if (rc) {
 			err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
 			return IRQ_NONE;
@@ -944,7 +944,7 @@
 		
 		/* Clear command complete interrupt caused by this write */
 		temp_word = 0x1f;
-		rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word);
+		rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
 		if (rc) {
 			err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
 			return IRQ_NONE;
@@ -975,14 +975,14 @@
 
 	/* Clear all events after serving them */
 	temp_word = 0x1F;
-	rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word);
+	rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
 	if (rc) {
 		err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
 		return IRQ_NONE;
 	}
 	/* Unmask Hot-plug Interrupt Enable */
 	if (!pciehp_poll_mode) {
-		rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word);
+		rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
 		if (rc) {
 			err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
 			return IRQ_NONE;
@@ -992,14 +992,14 @@
 		dbg("%s: hp_register_read_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word);
 		temp_word = (temp_word & ~HP_INTR_ENABLE) | HP_INTR_ENABLE;
 
-		rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word);
+		rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
 		if (rc) {
 			err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
 			return IRQ_NONE;
 		}
 		dbg("%s: hp_register_write_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word); 	
 	
-		rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+		rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
 		if (rc) {
 			err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
 			return IRQ_NONE;
@@ -1008,7 +1008,7 @@
 		
 		/* Clear command complete interrupt caused by this write */
 		temp_word = 0x1F;
-		rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word);
+		rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
 		if (rc) {
 			err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
 			return IRQ_NONE;
@@ -1038,7 +1038,7 @@
 		return -1;
 	}
 
-	retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP, lnk_cap);
+	retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP(slot->ctrl->cap_base), lnk_cap);
 
 	if (retval) {
 		err("%s : hp_register_read_dword  LNK_CAP failed\n", __FUNCTION__);
@@ -1079,7 +1079,7 @@
 		return -1;
 	}
 
-	retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP, lnk_cap);
+	retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP(slot->ctrl->cap_base), lnk_cap);
 
 	if (retval) {
 		err("%s : hp_register_read_dword  LNK_CAP failed\n", __FUNCTION__);
@@ -1141,7 +1141,7 @@
 		return -1;
 	}
 
-	retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS, lnk_status);
+	retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(slot->ctrl->cap_base), lnk_status);
 
 	if (retval) {
 		err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__);
@@ -1182,7 +1182,7 @@
 		return -1;
 	}
 
-	retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS, lnk_status);
+	retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(slot->ctrl->cap_base), lnk_status);
 
 	if (retval) {
 		err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__);
@@ -1292,47 +1292,48 @@
 		goto abort_free_ctlr;
 	}
 
-	pcie_cap_base = cap_base;
+	ctrl->cap_base = cap_base;
 
 	dbg("%s: pcie_cap_base %x\n", __FUNCTION__, pcie_cap_base);
 
-	rc = hp_register_read_word(pdev, CAP_REG, cap_reg);
+	rc = hp_register_read_word(pdev, CAP_REG(ctrl->cap_base), cap_reg);
 	if (rc) {
 		err("%s : hp_register_read_word CAP_REG failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
-	dbg("%s: CAP_REG offset %x cap_reg %x\n", __FUNCTION__, CAP_REG, cap_reg);
+	dbg("%s: CAP_REG offset %x cap_reg %x\n", __FUNCTION__, CAP_REG(ctrl->cap_base), cap_reg);
 
-	if (((cap_reg & SLOT_IMPL) == 0) || ((cap_reg & DEV_PORT_TYPE) != 0x0040)){
+	if (((cap_reg & SLOT_IMPL) == 0) || (((cap_reg & DEV_PORT_TYPE) != 0x0040)
+		&& ((cap_reg & DEV_PORT_TYPE) != 0x0060))) {
 		dbg("%s : This is not a root port or the port is not connected to a slot\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
 
-	rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP, slot_cap);
+	rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP(ctrl->cap_base), slot_cap);
 	if (rc) {
 		err("%s : hp_register_read_word CAP_REG failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
-	dbg("%s: SLOT_CAP offset %x slot_cap %x\n", __FUNCTION__, SLOT_CAP, slot_cap);
+	dbg("%s: SLOT_CAP offset %x slot_cap %x\n", __FUNCTION__, SLOT_CAP(ctrl->cap_base), slot_cap);
 
 	if (!(slot_cap & HP_CAP)) {
 		dbg("%s : This slot is not hot-plug capable\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
 	/* For debugging purpose */
-	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
-	dbg("%s: SLOT_STATUS offset %x slot_status %x\n", __FUNCTION__, SLOT_STATUS, slot_status);
+	dbg("%s: SLOT_STATUS offset %x slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base), slot_status);
 
-	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl);
+	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), slot_ctrl);
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
-	dbg("%s: SLOT_CTRL offset %x slot_ctrl %x\n", __FUNCTION__, SLOT_CTRL, slot_ctrl);
+	dbg("%s: SLOT_CTRL offset %x slot_ctrl %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), slot_ctrl);
 
 	if (first) {
 		spin_lock_init(&hpc_event_lock);
@@ -1372,36 +1373,37 @@
 	php_ctlr->num_slots = 1;
 
 	/* Mask Hot-plug Interrupt Enable */
-	rc = hp_register_read_word(pdev, SLOT_CTRL, temp_word);
+	rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
 
-	dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL, temp_word);
+	dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), temp_word);
 	temp_word = (temp_word & ~HP_INTR_ENABLE & ~CMD_CMPL_INTR_ENABLE) | 0x00;
 
-	rc = hp_register_write_word(pdev, SLOT_CTRL, temp_word);
+	rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
 	if (rc) {
 		err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
 	dbg("%s : Mask HPIE hp_register_write_word SLOT_CTRL %x\n", __FUNCTION__, temp_word);
 
-	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
-	dbg("%s: Mask HPIE SLOT_STATUS offset %x reads slot_status %x\n", __FUNCTION__, SLOT_STATUS, slot_status);
+	dbg("%s: Mask HPIE SLOT_STATUS offset %x reads slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base)
+		, slot_status);
 
 	temp_word = 0x1F; /* Clear all events */
-	rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word);
+	rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
 	if (rc) {
 		err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
-	dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS, temp_word);
+	dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base), temp_word);
 
 	if (pciehp_poll_mode)  {/* Install interrupt polling code */
 		/* Install and start the interrupt polling timer */
@@ -1417,12 +1419,12 @@
 		}
 	}
 
-	rc = hp_register_read_word(pdev, SLOT_CTRL, temp_word);
+	rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
-	dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL, temp_word);
+	dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), temp_word);
 	dbg("%s: slot_cap %x\n", __FUNCTION__, slot_cap);
 
 	intr_enable = intr_enable | PRSN_DETECT_ENABLE;
@@ -1446,27 +1448,27 @@
 	dbg("%s: temp_word %x\n", __FUNCTION__, temp_word);
 
 	/* Unmask Hot-plug Interrupt Enable for the interrupt notification mechanism case */
-	rc = hp_register_write_word(pdev, SLOT_CTRL, temp_word);
+	rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
 	if (rc) {
 		err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
 	dbg("%s : Unmask HPIE hp_register_write_word SLOT_CTRL with %x\n", __FUNCTION__, temp_word);
-	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status);
+	rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
 	if (rc) {
 		err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
 	dbg("%s: Unmask HPIE SLOT_STATUS offset %x reads slot_status %x\n", __FUNCTION__, 
-		SLOT_STATUS, slot_status);
+		SLOT_STATUS(ctrl->cap_base), slot_status);
 	
 	temp_word =  0x1F; /* Clear all events */
-	rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word);
+	rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
 	if (rc) {
 		err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
 		goto abort_free_ctlr;
 	}
-	dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS, temp_word);
+	dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base), temp_word);
 	
 	/*  Add this HPC instance into the HPC list */
 	spin_lock(&list_lock);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index f0c53f8..a70a5c57 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -95,7 +95,7 @@
  */
 static void release_slot(struct hotplug_slot *hotplug_slot)
 {
-	struct slot *slot = (struct slot *)hotplug_slot->private;
+	struct slot *slot = hotplug_slot->private;
 
 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
 
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 9f90eb8..490a955 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -1885,7 +1885,7 @@
 	func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
 	if (!func) {
 		dbg("%s: Error! slot NULL\n", __FUNCTION__);
-		return 1;
+		return -ENODEV;
 	}
 
 	/* Check to see if (latch closed, card present, power off) */
@@ -1894,19 +1894,19 @@
 	if (rc || !getstatus) {
 		info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 	if (rc || getstatus) {
 		info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 	if (rc || getstatus) {
 		info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	up(&p_slot->ctrl->crit_sect);
 
@@ -1914,7 +1914,7 @@
 
 	func = shpchp_slot_create(p_slot->bus);
 	if (func == NULL)
-		return 1;
+		return -ENOMEM;
 
 	func->bus = p_slot->bus;
 	func->device = p_slot->device;
@@ -1939,7 +1939,7 @@
 		/* Setup slot structure with entry for empty slot */
 		func = shpchp_slot_create(p_slot->bus);
 		if (func == NULL)
-			return (1);	/* Out of memory */
+			return -ENOMEM;	/* Out of memory */
 
 		func->bus = p_slot->bus;
 		func->device = p_slot->device;
@@ -1972,7 +1972,7 @@
 	struct pci_func *func;
 
 	if (!p_slot->ctrl)
-		return 1;
+		return -ENODEV;
 
 	pci_bus = p_slot->ctrl->pci_dev->subordinate;
 
@@ -1983,19 +1983,19 @@
 	if (ret || !getstatus) {
 		info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 	if (ret || getstatus) {
 		info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 	if (ret || !getstatus) {
 		info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
 		up(&p_slot->ctrl->crit_sect);
-		return 1;
+		return -ENODEV;
 	}
 	up(&p_slot->ctrl->crit_sect);
 
@@ -2011,7 +2011,7 @@
 		/* Check the Class Code */
 		rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
 		if (rc)
-			return rc;
+			return -ENODEV;
 
 		if (class_code == PCI_BASE_CLASS_DISPLAY) {
 			/* Display/Video adapter (not supported) */
@@ -2020,13 +2020,13 @@
 			/* See if it's a bridge */
 			rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 			if (rc)
-				return rc;
+				return -ENODEV;
 
 			/* If it's a bridge, check the VGA Enable bit */
 			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 				rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
 				if (rc)
-					return rc;
+					return -ENODEV;
 
 				/* If the VGA Enable bit is set, remove isn't supported */
 				if (BCR & PCI_BRIDGE_CTL_VGA) {
@@ -2042,12 +2042,12 @@
 	if ((func != NULL) && !rc) {
 		rc = remove_board(func, p_slot->ctrl);
 	} else if (!rc)
-		rc = 1;
+		rc = -ENODEV;
 
 	if (p_slot)
 		update_slot_info(p_slot);
 
-	return(rc);
+	return rc;
 }
 
 
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 8568b20..6ca0061 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -73,6 +73,17 @@
 	return (str - buf);
 }
 
+static ssize_t modalias_show(struct device *dev, char *buf)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+
+	return sprintf(buf, "pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x\n",
+		       pci_dev->vendor, pci_dev->device,
+		       pci_dev->subsystem_vendor, pci_dev->subsystem_device,
+		       (u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8),
+		       (u8)(pci_dev->class));
+}
+
 struct device_attribute pci_dev_attrs[] = {
 	__ATTR_RO(resource),
 	__ATTR_RO(vendor),
@@ -82,6 +93,7 @@
 	__ATTR_RO(class),
 	__ATTR_RO(irq),
 	__ATTR_RO(local_cpus),
+	__ATTR_RO(modalias),
 	__ATTR_NULL,
 };
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 79cdc16..744da0d 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -32,33 +32,6 @@
 extern unsigned char pci_bus_max_busnr(struct pci_bus *bus);
 extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
 
-struct pci_dev_wrapped {
-	struct pci_dev	*dev;
-	void		*data;
-};
-
-struct pci_bus_wrapped {
-	struct pci_bus	*bus;
-	void		*data;
-};
-
-struct pci_visit {
-	int (* pre_visit_pci_bus)	(struct pci_bus_wrapped *,
-					 struct pci_dev_wrapped *);
-	int (* post_visit_pci_bus)	(struct pci_bus_wrapped *,
-					 struct pci_dev_wrapped *);
-
-	int (* pre_visit_pci_dev)	(struct pci_dev_wrapped *,
-					 struct pci_bus_wrapped *);
-	int (* visit_pci_dev)		(struct pci_dev_wrapped *,
-					 struct pci_bus_wrapped *);
-	int (* post_visit_pci_dev)	(struct pci_dev_wrapped *,
-					 struct pci_bus_wrapped *);
-};
-
-extern int pci_visit_dev(struct pci_visit *fn,
-			 struct pci_dev_wrapped *wrapped_dev,
-			 struct pci_bus_wrapped *wrapped_parent);
 extern void pci_remove_legacy_files(struct pci_bus *bus);
 
 /* Lock for read/write access to pci device and bus lists */
diff --git a/drivers/pci/pcie/portdrv_bus.c b/drivers/pci/pcie/portdrv_bus.c
index 4037a3e..3e84b50 100644
--- a/drivers/pci/pcie/portdrv_bus.c
+++ b/drivers/pci/pcie/portdrv_bus.c
@@ -39,7 +39,8 @@
 		driver->id_table->vendor != pciedev->id.vendor) ||
 	       (driver->id_table->device != PCI_ANY_ID &&
 		driver->id_table->device != pciedev->id.device) ||	
-		driver->id_table->port_type != pciedev->id.port_type ||
+	       (driver->id_table->port_type != PCIE_ANY_PORT &&
+		driver->id_table->port_type != pciedev->id.port_type) ||
 		driver->id_table->service_type != pciedev->id.service_type )
 		return 0;
 
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 66150d0..c4ade28 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -1592,9 +1592,9 @@
 
 	/* Set up character device for user mode clients */
 	i = register_chrdev(0, "pcmcia", &ds_fops);
-	if (i == -EBUSY)
+	if (i < 0)
 		printk(KERN_NOTICE "unable to find a free device # for "
-		       "Driver Services\n");
+		       "Driver Services (error=%d)\n", i);
 	else
 		major_dev = i;
 
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 02cfe24..ceeb3cf 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -7,7 +7,7 @@
  * Bugreports.to..: <Linux390@de.ibm.com>
  * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001
  *
- * $Revision: 1.161 $
+ * $Revision: 1.164 $
  */
 
 #include <linux/config.h>
@@ -1766,10 +1766,10 @@
 		printk(KERN_WARNING
 		       "dasd_generic_probe: could not add sysfs entries "
 		       "for %s\n", cdev->dev.bus_id);
+	} else {
+		cdev->handler = &dasd_int_handler;
 	}
 
-	cdev->handler = &dasd_int_handler;
-
 	return ret;
 }
 
@@ -1780,6 +1780,8 @@
 {
 	struct dasd_device *device;
 
+	cdev->handler = NULL;
+
 	dasd_remove_sysfs_files(cdev);
 	device = dasd_device_from_cdev(cdev);
 	if (IS_ERR(device))
@@ -1810,14 +1812,14 @@
 	struct dasd_device *device;
 	int feature_diag, rc;
 
-	feature_diag = dasd_get_feature(cdev, DASD_FEATURE_USEDIAG);
-	if (feature_diag < 0)
-		return feature_diag;
-
 	device = dasd_create_device(cdev);
 	if (IS_ERR(device))
 		return PTR_ERR(device);
 
+	feature_diag = dasd_get_feature(cdev, DASD_FEATURE_USEDIAG);
+	if (feature_diag < 0)
+		return feature_diag;
+
 	if (feature_diag) {
 	  	if (!dasd_diag_discipline_pointer) {
 		        printk (KERN_WARNING
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 0b5d3a5..ee9b96d 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1253,11 +1253,11 @@
 	unsigned long timeout = jiffies + (HZ * 5);
 
 	if (ap->flags & ATA_FLAG_SATA_RESET) {
-		scr_write(ap, SCR_CONTROL, 0x301); /* issue phy wake/reset */
-		scr_read(ap, SCR_STATUS);	/* dummy read; flush */
+		/* issue phy wake/reset */
+		scr_write_flush(ap, SCR_CONTROL, 0x301);
 		udelay(400);			/* FIXME: a guess */
 	}
-	scr_write(ap, SCR_CONTROL, 0x300);	/* issue phy wake/clear reset */
+	scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */
 
 	/* wait for phy to become ready, if necessary */
 	do {
@@ -2539,7 +2539,7 @@
 	ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
 	qc->dma_dir = DMA_FROM_DEVICE;
 
-	memset(&qc->cdb, 0, sizeof(ap->cdb_len));
+	memset(&qc->cdb, 0, ap->cdb_len);
 	qc->cdb[0] = REQUEST_SENSE;
 	qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
 
@@ -2811,6 +2811,7 @@
 
 	/* call completion callback */
 	rc = qc->complete_fn(qc, drv_stat);
+	qc->flags &= ~ATA_QCFLAG_ACTIVE;
 
 	/* if callback indicates not to complete command (non-zero),
 	 * return immediately
@@ -3229,7 +3230,8 @@
 			struct ata_queued_cmd *qc;
 
 			qc = ata_qc_from_tag(ap, ap->active_tag);
-			if (qc && (!(qc->tf.ctl & ATA_NIEN)))
+			if (qc && (!(qc->tf.ctl & ATA_NIEN)) &&
+			    (qc->flags & ATA_QCFLAG_ACTIVE))
 				handled |= ata_host_intr(ap, qc);
 		}
 	}
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 4c96df0..416ba67 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -347,7 +347,10 @@
 		 */
 		if ((dev->flags & ATA_DFLAG_LBA48) &&
 		    ((dev->flags & ATA_DFLAG_LOCK_SECTORS) == 0)) {
-			sdev->host->max_sectors = 2048;
+			/*
+			 * do not overwrite sdev->host->max_sectors, since
+			 * other drives on this host may not support LBA48
+			 */
 			blk_queue_max_sectors(sdev->request_queue, 2048);
 		}
 	}
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 8d1a5d2..05075bd 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -395,7 +395,7 @@
 
 	/* Clear a magic bit in SCR1 according to Darwin, those help
 	 * some funky seagate drives (though so far, those were already
-	 * set by the firmware on the machines I had access to
+	 * set by the firmware on the machines I had access to)
 	 */
 	writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
 	       mmio_base + K2_SATA_SICR1_OFFSET);
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 6eeb48f..0d7b65f 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -661,10 +661,10 @@
 	/* Is this a multiport card? */
 	tuple->DesiredTuple = CISTPL_MANFID;
 	if (first_tuple(handle, tuple, parse) == CS_SUCCESS) {
-		info->manfid = le16_to_cpu(buf[0]);
+		info->manfid = parse->manfid.manf;
 		for (i = 0; i < MULTI_COUNT; i++)
 			if ((info->manfid == multi_id[i].manfid) &&
-			    (le16_to_cpu(buf[1]) == multi_id[i].prodid))
+			    (parse->manfid.card == multi_id[i].prodid))
 				break;
 		if (i < MULTI_COUNT)
 			info->multi = multi_id[i].multi;
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index ec9b3bd..4ab5000 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -286,6 +286,39 @@
 }
 static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL);
 
+static ssize_t show_modalias(struct device *dev, char *buf)
+{
+	struct usb_interface *intf;
+	struct usb_device *udev;
+
+	intf = to_usb_interface(dev);
+	udev = interface_to_usbdev(intf);
+	if (udev->descriptor.bDeviceClass == 0) {
+		struct usb_host_interface *alt = intf->cur_altsetting;
+
+		return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X\n",
+			       le16_to_cpu(udev->descriptor.idVendor),
+			       le16_to_cpu(udev->descriptor.idProduct),
+			       le16_to_cpu(udev->descriptor.bcdDevice),
+			       udev->descriptor.bDeviceClass,
+			       udev->descriptor.bDeviceSubClass,
+			       udev->descriptor.bDeviceProtocol,
+			       alt->desc.bInterfaceClass,
+			       alt->desc.bInterfaceSubClass,
+			       alt->desc.bInterfaceProtocol);
+ 	} else {
+		return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*\n",
+			       le16_to_cpu(udev->descriptor.idVendor),
+			       le16_to_cpu(udev->descriptor.idProduct),
+			       le16_to_cpu(udev->descriptor.bcdDevice),
+			       udev->descriptor.bDeviceClass,
+			       udev->descriptor.bDeviceSubClass,
+			       udev->descriptor.bDeviceProtocol);
+	}
+
+}
+static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
+
 static struct attribute *intf_attrs[] = {
 	&dev_attr_bInterfaceNumber.attr,
 	&dev_attr_bAlternateSetting.attr,
@@ -293,6 +326,7 @@
 	&dev_attr_bInterfaceClass.attr,
 	&dev_attr_bInterfaceSubClass.attr,
 	&dev_attr_bInterfaceProtocol.attr,
+	&dev_attr_modalias.attr,
 	NULL,
 };
 static struct attribute_group intf_attr_grp = {
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 02fefab..429330bc 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -72,6 +72,7 @@
 	}
 
 	/* turn off now-idle HC */
+	del_timer_sync (&ehci->watchdog);
 	ehci_halt (ehci);
 	hcd->state = HC_STATE_SUSPENDED;
 
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index db64c90..b104430 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -219,17 +219,21 @@
 	  by some sample firmware from Epson.
 
 config USB_ZAURUS
-	boolean "Sharp Zaurus (stock ROMs)"
+	boolean "Sharp Zaurus (stock ROMs) and compatible"
 	depends on USB_USBNET
 	select CRC32
 	default y
 	help
 	  Choose this option to support the usb networking links used by
 	  Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
+	  This also supports some related device firmware, as used in some
+	  PDAs from Olympus and some cell phones from Motorola.
 
-	  If you install an alternate ROM image, you may no longer need
-	  to support this protocol.  Only the "eth-fd" driver really needs
-	  this non-conformant variant of CDC Ethernet protocol.
+	  If you install an alternate ROM image, such as the Linux 2.6 based
+	  versions of OpenZaurus, you should no longer need to support this
+	  protocol.  Only the "eth-fd" or "net_fd" drivers in these devices
+	  really need this non-conformant variant of CDC Ethernet (or in
+	  some cases CDC MDLM) protocol, not "g_ether".
 
 config USB_CDCETHER
 	boolean "CDC Ethernet support (smart devices such as cable modems)"
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index f6bc6b3..85476e7 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -1517,6 +1517,26 @@
 	}
 }
 
+#endif	/* NEED_GENERIC_CDC */
+
+
+#ifdef	CONFIG_USB_CDCETHER
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * Communications Device Class, Ethernet Control model
+ *
+ * Takes two interfaces.  The DATA interface is inactive till an altsetting
+ * is selected.  Configuration data includes class descriptors.
+ *
+ * This should interop with whatever the 2.4 "CDCEther.c" driver
+ * (by Brad Hards) talked with.
+ *
+ *-------------------------------------------------------------------------*/
+
+#include <linux/ctype.h>
+
 
 static void dumpspeed (struct usbnet *dev, __le32 *speeds)
 {
@@ -1567,26 +1587,6 @@
 	}
 }
 
-#endif	/* NEED_GENERIC_CDC */
-
-
-#ifdef	CONFIG_USB_CDCETHER
-#define	HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Communications Device Class, Ethernet Control model
- * 
- * Takes two interfaces.  The DATA interface is inactive till an altsetting
- * is selected.  Configuration data includes class descriptors.
- *
- * This should interop with whatever the 2.4 "CDCEther.c" driver
- * (by Brad Hards) talked with.
- *
- *-------------------------------------------------------------------------*/
-
-#include <linux/ctype.h>
-
 static u8 nibble (unsigned char c)
 {
 	if (likely (isdigit (c)))
@@ -2765,7 +2765,7 @@
 			}
 			/* expect bcdVersion 1.0, ignore */
 			if (memcmp(&desc->bGUID, blan_guid, 16)
-				    || memcmp(&desc->bGUID, blan_guid, 16) ) {
+				    && memcmp(&desc->bGUID, blan_guid, 16) ) {
 				/* hey, this one might _really_ be MDLM! */
 				dev_dbg (&intf->dev, "MDLM guid\n");
 				goto bad_desc;
@@ -2797,11 +2797,13 @@
 			 *  - bPad (ignored, for PADAFTER -- BLAN-only)
 			 * bits are:
 			 *  - 0x01 -- Zaurus framing (add CRC)
-			 *  - 0x02 -- PADBEFORE
-			 *  - 0x04 -- PADAFTER
+			 *  - 0x02 -- PADBEFORE (CRC includes some padding)
+			 *  - 0x04 -- PADAFTER (some padding after CRC)
 			 *  - 0x08 -- "fermat" packet mangling (for hw bugs)
+			 * the PADBEFORE appears not to matter; we interop
+			 * with devices that use it and those that don't.
 			 */
-			if (detail->bDetailData[1] != 0x01) {
+			if ((detail->bDetailData[1] & ~02) != 0x01) {
 				/* bmDataCapabilites == 0 would be fine too,
 				 * but framing is minidriver-coupled for now.
 				 */
@@ -4071,9 +4073,6 @@
 	USB_DEVICE (0x8086, 0x07d3),	// "blob" bootloader
 	.driver_info =	(unsigned long) &blob_info,
 }, {
-	USB_DEVICE (0x22b8, 0x600c),	// USBNET Motorola E680
-	.driver_info =	(unsigned long) &linuxdev_info,
-}, {
 	// Linux Ethernet/RNDIS gadget on pxa210/25x/26x
 	// e.g. Gumstix, current OpenZaurus, ...
 	USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203),
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f34a9bb..012e63e 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -89,6 +89,7 @@
 
 static struct usb_device_id id_table_earthmate [] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
+	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 	{ }						/* Terminating entry */
 };
 
@@ -99,6 +100,7 @@
 
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
+	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 	{ }						/* Terminating entry */
 };
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 1012ee6..1fa119e 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -13,6 +13,7 @@
 /* DeLorme Earthmate USB - a GPS device */
 #define	VENDOR_ID_DELORME		 0x1163
 #define PRODUCT_ID_EARTHMATEUSB		 0x0100
+#define PRODUCT_ID_EARTHMATEUSB_LT20	 0x0200
 
 /* Cypress HID->COM RS232 Adapter */
 #define VENDOR_ID_CYPRESS		 0x04b4
diff --git a/fs/buffer.c b/fs/buffer.c
index 6f88dcc..7e9e409 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2094,9 +2094,12 @@
 			continue;
 
 		if (!buffer_mapped(bh)) {
+			int err = 0;
+
 			fully_mapped = 0;
 			if (iblock < lblock) {
-				if (get_block(inode, iblock, bh, 0))
+				err = get_block(inode, iblock, bh, 0);
+				if (err)
 					SetPageError(page);
 			}
 			if (!buffer_mapped(bh)) {
@@ -2104,7 +2107,8 @@
 				memset(kaddr + i * blocksize, 0, blocksize);
 				flush_dcache_page(page);
 				kunmap_atomic(kaddr, KM_USER0);
-				set_buffer_uptodate(bh);
+				if (!err)
+					set_buffer_uptodate(bh);
 				continue;
 			}
 			/*
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 545b440..981ccb2 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -225,8 +225,16 @@
 		       int errno)
 {
 	char nbuf[16];
-	const char *errstr = ext3_decode_error(sb, errno, nbuf);
+	const char *errstr;
 
+	/* Special case: if the error is EROFS, and we're not already
+	 * inside a transaction, then there's really no point in logging
+	 * an error. */
+	if (errno == -EROFS && journal_current_handle() == NULL &&
+	    (sb->s_flags & MS_RDONLY))
+		return;
+
+	errstr = ext3_decode_error(sb, errno, nbuf);
 	printk (KERN_CRIT "EXT3-fs error (device %s) in %s: %s\n",
 		sb->s_id, function, errstr);
 
diff --git a/fs/proc/mmu.c b/fs/proc/mmu.c
index a704103..25d2d9c 100644
--- a/fs/proc/mmu.c
+++ b/fs/proc/mmu.c
@@ -50,13 +50,23 @@
 		read_lock(&vmlist_lock);
 
 		for (vma = vmlist; vma; vma = vma->next) {
+			unsigned long addr = (unsigned long) vma->addr;
+
+			/*
+			 * Some archs keep another range for modules in vmlist
+			 */
+			if (addr < VMALLOC_START)
+				continue;
+			if (addr >= VMALLOC_END)
+				break;
+
 			vmi->used += vma->size;
 
-			free_area_size = (unsigned long) vma->addr - prev_end;
+			free_area_size = addr - prev_end;
 			if (vmi->largest_chunk < free_area_size)
 				vmi->largest_chunk = free_area_size;
 
-			prev_end = vma->size + (unsigned long) vma->addr;
+			prev_end = vma->size + addr;
 		}
 
 		if (VMALLOC_END - prev_end > vmi->largest_chunk)
diff --git a/include/asm-ia64/ioctl32.h b/include/asm-ia64/ioctl32.h
index d0d227f..e69de29 100644
--- a/include/asm-ia64/ioctl32.h
+++ b/include/asm-ia64/ioctl32.h
@@ -1 +0,0 @@
-#include <linux/ioctl32.h>
diff --git a/include/asm-um/elf.h b/include/asm-um/elf.h
deleted file mode 100644
index e69de29..0000000
--- a/include/asm-um/elf.h
+++ /dev/null
diff --git a/include/asm-x86_64/apicdef.h b/include/asm-x86_64/apicdef.h
index 3d7627f..bfebdb6 100644
--- a/include/asm-x86_64/apicdef.h
+++ b/include/asm-x86_64/apicdef.h
@@ -112,7 +112,7 @@
 
 #define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
 
-#define MAX_IO_APICS 32
+#define MAX_IO_APICS 128
 
 /*
  * All x86-64 systems are xAPIC compatible.
diff --git a/include/asm-x86_64/io_apic.h b/include/asm-x86_64/io_apic.h
index 7efc932..3257374 100644
--- a/include/asm-x86_64/io_apic.h
+++ b/include/asm-x86_64/io_apic.h
@@ -202,7 +202,6 @@
 #define io_apic_assign_pci_irqs (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
 
 #ifdef CONFIG_ACPI_BOOT
-extern int io_apic_get_unique_id (int ioapic, int apic_id);
 extern int io_apic_get_version (int ioapic);
 extern int io_apic_get_redir_entries (int ioapic);
 extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int, int);
diff --git a/include/asm-x86_64/ioctl32.h b/include/asm-x86_64/ioctl32.h
index d0d227f..e69de29 100644
--- a/include/asm-x86_64/ioctl32.h
+++ b/include/asm-x86_64/ioctl32.h
@@ -1 +0,0 @@
-#include <linux/ioctl32.h>
diff --git a/include/asm-x86_64/nmi.h b/include/asm-x86_64/nmi.h
index 21d56b0..d3abfc6 100644
--- a/include/asm-x86_64/nmi.h
+++ b/include/asm-x86_64/nmi.h
@@ -53,5 +53,7 @@
 
 extern int panic_on_timeout;
 extern int unknown_nmi_panic;
+
+extern int check_nmi_watchdog(void);
  
 #endif /* ASM_NMI_H */
diff --git a/include/asm-x86_64/processor.h b/include/asm-x86_64/processor.h
index f0581c3..d641b19 100644
--- a/include/asm-x86_64/processor.h
+++ b/include/asm-x86_64/processor.h
@@ -62,7 +62,6 @@
 	int	x86_tlbsize;	/* number of 4K pages in DTLB/ITLB combined(in pages)*/
         __u8    x86_virt_bits, x86_phys_bits;
 	__u8	x86_num_cores;
-	__u8	x86_apicid;
         __u32   x86_power; 	
 	__u32   extended_cpuid_level;	/* Max extended CPUID function supported */
 	unsigned long loops_per_jiffy;
@@ -159,9 +158,9 @@
 
 
 /*
- * User space process size. 47bits.
+ * User space process size. 47bits minus one guard page.
  */
-#define TASK_SIZE	(0x800000000000UL)
+#define TASK_SIZE	(0x800000000000UL - 4096)
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h
index d0f8f8b..f2f0736 100644
--- a/include/asm-x86_64/proto.h
+++ b/include/asm-x86_64/proto.h
@@ -30,6 +30,11 @@
 extern void iommu_hole_init(void);
 
 extern void time_init_gtod(void);
+extern int pmtimer_mark_offset(void);
+extern unsigned int do_gettimeoffset_pm(void);
+extern u32 pmtmr_ioport;
+extern unsigned long long monotonic_base;
+extern int sysctl_vsyscall;
 
 extern void do_softirq_thunk(void);
 
diff --git a/include/asm-x86_64/vsyscall.h b/include/asm-x86_64/vsyscall.h
index b0c8d43..2872da2 100644
--- a/include/asm-x86_64/vsyscall.h
+++ b/include/asm-x86_64/vsyscall.h
@@ -25,6 +25,7 @@
 
 #define VXTIME_TSC	1
 #define VXTIME_HPET	2
+#define VXTIME_PMTMR	3
 
 struct vxtime_data {
 	long hpet_address;	/* HPET base address */
@@ -54,6 +55,8 @@
 extern int sysctl_vsyscall;
 extern seqlock_t xtime_lock;
 
+extern int sysctl_vsyscall;
+
 #define ARCH_HAVE_XTIME_LOCK 1
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/device.h b/include/linux/device.h
index cf47045..df94c0d 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -273,9 +273,6 @@
 					   BIOS data relevant to device) */
 	struct dev_pm_info	power;
 
-	u32		detach_state;	/* State to enter when device is
-					   detached from its driver. */
-
 	u64		*dma_mask;	/* dma mask (if dma'able device) */
 	u64		coherent_dma_mask;/* Like dma_mask, but for
 					     alloc_coherent mappings as
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 505160a..1f7e203 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -584,6 +584,13 @@
 	ap->ops->scr_write(ap, reg, val);
 }
 
+static inline void scr_write_flush(struct ata_port *ap, unsigned int reg, 
+				   u32 val)
+{
+	ap->ops->scr_write(ap, reg, val);
+	(void) ap->ops->scr_read(ap, reg);
+}
+
 static inline unsigned int sata_dev_present(struct ata_port *ap)
 {
 	return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0;
diff --git a/include/media/video-buf-dvb.h b/include/media/video-buf-dvb.h
index 94bd336..ad0a07a 100644
--- a/include/media/video-buf-dvb.h
+++ b/include/media/video-buf-dvb.h
@@ -16,7 +16,7 @@
 	int                        nfeeds;
 
 	/* videobuf_dvb_(un)register manges this */
-	struct dvb_adapter         *adapter;
+	struct dvb_adapter         adapter;
 	struct dvb_demux           demux;
 	struct dmxdev              dmxdev;
 	struct dmx_frontend        fe_hw;
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 2fb0e46..06b5a63 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -30,6 +30,7 @@
  */
 irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = {
 	[0 ... NR_IRQS-1] = {
+		.status = IRQ_DISABLED,
 		.handler = &no_irq_type,
 		.lock = SPIN_LOCK_UNLOCKED
 	}
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 7960ddf..4cdebc9 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -156,14 +156,14 @@
 		goto Unlock;
 	}
 
-	pr_debug("PM: Preparing system for suspend\n");
+	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
 	if ((error = suspend_prepare(state)))
 		goto Unlock;
 
-	pr_debug("PM: Entering state.\n");
+	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
 	error = suspend_enter(state);
 
-	pr_debug("PM: Finishing up.\n");
+	pr_debug("PM: Finishing wakeup.\n");
 	suspend_finish(state);
  Unlock:
 	up(&pm_sem);
diff --git a/kernel/printk.c b/kernel/printk.c
index 290a07c..01b58d7 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -160,42 +160,6 @@
 
 __setup("console=", console_setup);
 
-/**
- * add_preferred_console - add a device to the list of preferred consoles.
- *
- * The last preferred console added will be used for kernel messages
- * and stdin/out/err for init.  Normally this is used by console_setup
- * above to handle user-supplied console arguments; however it can also
- * be used by arch-specific code either to override the user or more
- * commonly to provide a default console (ie from PROM variables) when
- * the user has not supplied one.
- */
-int __init add_preferred_console(char *name, int idx, char *options)
-{
-	struct console_cmdline *c;
-	int i;
-
-	/*
-	 *	See if this tty is not yet registered, and
-	 *	if we have a slot free.
-	 */
-	for(i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++)
-		if (strcmp(console_cmdline[i].name, name) == 0 &&
-			  console_cmdline[i].index == idx) {
-				selected_console = i;
-				return 0;
-		}
-	if (i == MAX_CMDLINECONSOLES)
-		return -E2BIG;
-	selected_console = i;
-	c = &console_cmdline[i];
-	memcpy(c->name, name, sizeof(c->name));
-	c->name[sizeof(c->name) - 1] = 0;
-	c->options = options;
-	c->index = idx;
-	return 0;
-}
-
 static int __init log_buf_len_setup(char *str)
 {
 	unsigned long size = memparse(str, &str);
@@ -671,6 +635,42 @@
 #endif
 
 /**
+ * add_preferred_console - add a device to the list of preferred consoles.
+ *
+ * The last preferred console added will be used for kernel messages
+ * and stdin/out/err for init.  Normally this is used by console_setup
+ * above to handle user-supplied console arguments; however it can also
+ * be used by arch-specific code either to override the user or more
+ * commonly to provide a default console (ie from PROM variables) when
+ * the user has not supplied one.
+ */
+int __init add_preferred_console(char *name, int idx, char *options)
+{
+	struct console_cmdline *c;
+	int i;
+
+	/*
+	 *	See if this tty is not yet registered, and
+	 *	if we have a slot free.
+	 */
+	for(i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++)
+		if (strcmp(console_cmdline[i].name, name) == 0 &&
+			  console_cmdline[i].index == idx) {
+				selected_console = i;
+				return 0;
+		}
+	if (i == MAX_CMDLINECONSOLES)
+		return -E2BIG;
+	selected_console = i;
+	c = &console_cmdline[i];
+	memcpy(c->name, name, sizeof(c->name));
+	c->name[sizeof(c->name) - 1] = 0;
+	c->options = options;
+	c->index = idx;
+	return 0;
+}
+
+/**
  * acquire_console_sem - lock the console system for exclusive use.
  *
  * Acquires a semaphore which guarantees that the caller has
diff --git a/kernel/profile.c b/kernel/profile.c
index 0221a50..ad8cbb7 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -49,15 +49,19 @@
 
 static int __init profile_setup(char * str)
 {
+	static char __initdata schedstr[] = "schedule";
 	int par;
 
-	if (!strncmp(str, "schedule", 8)) {
+	if (!strncmp(str, schedstr, strlen(schedstr))) {
 		prof_on = SCHED_PROFILING;
-		printk(KERN_INFO "kernel schedule profiling enabled\n");
-		if (str[7] == ',')
-			str += 8;
-	}
-	if (get_option(&str,&par)) {
+		if (str[strlen(schedstr)] == ',')
+			str += strlen(schedstr) + 1;
+		if (get_option(&str, &par))
+			prof_shift = par;
+		printk(KERN_INFO
+			"kernel schedule profiling enabled (shift: %ld)\n",
+			prof_shift);
+	} else if (get_option(&str, &par)) {
 		prof_shift = par;
 		prof_on = CPU_PROFILING;
 		printk(KERN_INFO "kernel profiling enabled (shift: %ld)\n",
diff --git a/mm/memory.c b/mm/memory.c
index 6bad4c4..d209f74 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1701,12 +1701,13 @@
 	spin_lock(&mm->page_table_lock);
 	page_table = pte_offset_map(pmd, address);
 	if (unlikely(!pte_same(*page_table, orig_pte))) {
-		pte_unmap(page_table);
-		spin_unlock(&mm->page_table_lock);
-		unlock_page(page);
-		page_cache_release(page);
 		ret = VM_FAULT_MINOR;
-		goto out;
+		goto out_nomap;
+	}
+
+	if (unlikely(!PageUptodate(page))) {
+		ret = VM_FAULT_SIGBUS;
+		goto out_nomap;
 	}
 
 	/* The page isn't present yet, go ahead with the fault. */
@@ -1741,6 +1742,12 @@
 	spin_unlock(&mm->page_table_lock);
 out:
 	return ret;
+out_nomap:
+	pte_unmap(page_table);
+	spin_unlock(&mm->page_table_lock);
+	unlock_page(page);
+	page_cache_release(page);
+	goto out;
 }
 
 /*
diff --git a/mm/mremap.c b/mm/mremap.c
index 0dd7ace..ec7238a 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -224,6 +224,12 @@
 			split = 1;
 	}
 
+	/*
+	 * if we failed to move page tables we still do total_vm increment
+	 * since do_munmap() will decrement it by old_len == new_len
+	 */
+	mm->total_vm += new_len >> PAGE_SHIFT;
+
 	if (do_munmap(mm, old_addr, old_len) < 0) {
 		/* OOM: unable to split vma, just get accounts right */
 		vm_unacct_memory(excess >> PAGE_SHIFT);
@@ -237,7 +243,6 @@
 			vma->vm_next->vm_flags |= VM_ACCOUNT;
 	}
 
-	mm->total_vm += new_len >> PAGE_SHIFT;
 	__vm_stat_account(mm, vma->vm_flags, vma->vm_file, new_len>>PAGE_SHIFT);
 	if (vm_flags & VM_LOCKED) {
 		mm->locked_vm += new_len >> PAGE_SHIFT;
diff --git a/mm/nommu.c b/mm/nommu.c
index b293ec1..c53e9c8 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -150,7 +150,8 @@
 	kfree(addr);
 }
 
-void *__vmalloc(unsigned long size, int gfp_mask, pgprot_t prot)
+void *__vmalloc(unsigned long size, unsigned int __nocast gfp_mask,
+			pgprot_t prot)
 {
 	/*
 	 * kmalloc doesn't like __GFP_HIGHMEM for some reason
diff --git a/mm/rmap.c b/mm/rmap.c
index 378de23..a6203b4 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -586,7 +586,7 @@
 		dec_mm_counter(mm, anon_rss);
 	}
 
-	inc_mm_counter(mm, rss);
+	dec_mm_counter(mm, rss);
 	page_remove_rmap(page);
 	page_cache_release(page);
 
diff --git a/mm/swapfile.c b/mm/swapfile.c
index a60e007..da48405 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -79,7 +79,7 @@
 		WARN_ON(page_count(page) <= 1);
 
 		bdi = bdev->bd_inode->i_mapping->backing_dev_info;
-		bdi->unplug_io_fn(bdi, page);
+		blk_run_backing_dev(bdi, page);
 	}
 	up_read(&swap_unplug_sem);
 }
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index 07fdf6e..b614914 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -476,8 +476,8 @@
 	int rc = 0;
 
 	if (!ss_initialized) {
-		avd->allowed = requested;
-		avd->decided = requested;
+		avd->allowed = 0xffffffff;
+		avd->decided = 0xffffffff;
 		avd->auditallow = 0;
 		avd->auditdeny = 0xffffffff;
 		avd->seqno = latest_granting;
@@ -1196,9 +1196,11 @@
 		}
 		policydb_loaded_version = policydb.policyvers;
 		ss_initialized = 1;
-
+		seqno = ++latest_granting;
 		LOAD_UNLOCK;
 		selinux_complete_init();
+		avc_ss_reset(seqno);
+		selnl_notify_policyload(seqno);
 		return 0;
 	}