diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index b726b47..6345878 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -143,7 +143,7 @@
 	int old_dpms;
 
 	/* PCH platforms and VLV only support on/off. */
-	if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON)
+	if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON)
 		mode = DRM_MODE_DPMS_OFF;
 
 	if (mode == connector->dpms)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 461a637..4154bcd 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3841,6 +3841,17 @@
 			}
 		}
 
+		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+			/* Use VBT settings if we have an eDP panel */
+			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+			if (edp_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				display_bpc = edp_bpc;
+			}
+			continue;
+		}
+
 		/*
 		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
 		 * through, clamp it down.  (Note: >12bpc will be caught below.)
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 79d308d..c600fb0 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2382,6 +2382,18 @@
 	return true;
 }
 
+static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo)
+{
+	struct drm_device *dev = intel_sdvo->base.base.dev;
+	struct drm_connector *connector, *tmp;
+
+	list_for_each_entry_safe(connector, tmp,
+				 &dev->mode_config.connector_list, head) {
+		if (intel_attached_encoder(connector) == &intel_sdvo->base)
+			intel_sdvo_destroy(connector);
+	}
+}
+
 static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
 					  struct intel_sdvo_connector *intel_sdvo_connector,
 					  int type)
@@ -2705,7 +2717,8 @@
 				    intel_sdvo->caps.output_flags) != true) {
 		DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
 			      SDVO_NAME(intel_sdvo));
-		goto err;
+		/* Output_setup can leave behind connectors! */
+		goto err_output;
 	}
 
 	/* Only enable the hotplug irq if we need it, to work around noisy
@@ -2718,12 +2731,12 @@
 
 	/* Set the input timing to the screen. Assume always input 0. */
 	if (!intel_sdvo_set_target_input(intel_sdvo))
-		goto err;
+		goto err_output;
 
 	if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo,
 						    &intel_sdvo->pixel_clock_min,
 						    &intel_sdvo->pixel_clock_max))
-		goto err;
+		goto err_output;
 
 	DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
 			"clock range %dMHz - %dMHz, "
@@ -2743,6 +2756,9 @@
 			(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
 	return true;
 
+err_output:
+	intel_sdvo_output_cleanup(intel_sdvo);
+
 err:
 	drm_encoder_cleanup(&intel_encoder->base);
 	i2c_del_adapter(&intel_sdvo->ddc);