| /* |
| * linux/sound/soc/pxa/mmp-sspa.h |
| * |
| * Copyright (C) 2011 Marvell International Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| #ifndef _MMP_SSPA_H |
| #define _MMP_SSPA_H |
| |
| /* |
| * SSPA Registers |
| */ |
| #define SSPA_RXD (0x00) |
| #define SSPA_RXID (0x04) |
| #define SSPA_RXCTL (0x08) |
| #define SSPA_RXSP (0x0c) |
| #define SSPA_RXFIFO_UL (0x10) |
| #define SSPA_RXINT_MASK (0x14) |
| #define SSPA_RXC (0x18) |
| #define SSPA_RXFIFO_NOFS (0x1c) |
| #define SSPA_RXFIFO_SIZE (0x20) |
| |
| #define SSPA_TXD (0x80) |
| #define SSPA_TXID (0x84) |
| #define SSPA_TXCTL (0x88) |
| #define SSPA_TXSP (0x8c) |
| #define SSPA_TXFIFO_LL (0x90) |
| #define SSPA_TXINT_MASK (0x94) |
| #define SSPA_TXC (0x98) |
| #define SSPA_TXFIFO_NOFS (0x9c) |
| #define SSPA_TXFIFO_SIZE (0xa0) |
| |
| /* SSPA Control Register */ |
| #define SSPA_CTL_XPH (1 << 31) /* Read Phase */ |
| #define SSPA_CTL_XFIG (1 << 15) /* Transmit Zeros when FIFO Empty */ |
| #define SSPA_CTL_JST (1 << 3) /* Audio Sample Justification */ |
| #define SSPA_CTL_XFRLEN2_MASK (7 << 24) |
| #define SSPA_CTL_XFRLEN2(x) ((x) << 24) /* Transmit Frame Length in Phase 2 */ |
| #define SSPA_CTL_XWDLEN2_MASK (7 << 21) |
| #define SSPA_CTL_XWDLEN2(x) ((x) << 21) /* Transmit Word Length in Phase 2 */ |
| #define SSPA_CTL_XDATDLY(x) ((x) << 19) /* Tansmit Data Delay */ |
| #define SSPA_CTL_XSSZ2_MASK (7 << 16) |
| #define SSPA_CTL_XSSZ2(x) ((x) << 16) /* Transmit Sample Audio Size */ |
| #define SSPA_CTL_XFRLEN1_MASK (7 << 8) |
| #define SSPA_CTL_XFRLEN1(x) ((x) << 8) /* Transmit Frame Length in Phase 1 */ |
| #define SSPA_CTL_XWDLEN1_MASK (7 << 5) |
| #define SSPA_CTL_XWDLEN1(x) ((x) << 5) /* Transmit Word Length in Phase 1 */ |
| #define SSPA_CTL_XSSZ1_MASK (7 << 0) |
| #define SSPA_CTL_XSSZ1(x) ((x) << 0) /* XSSZ1 */ |
| |
| #define SSPA_CTL_8_BITS (0x0) /* Sample Size */ |
| #define SSPA_CTL_12_BITS (0x1) |
| #define SSPA_CTL_16_BITS (0x2) |
| #define SSPA_CTL_20_BITS (0x3) |
| #define SSPA_CTL_24_BITS (0x4) |
| #define SSPA_CTL_32_BITS (0x5) |
| |
| /* SSPA Serial Port Register */ |
| #define SSPA_SP_WEN (1 << 31) /* Write Configuration Enable */ |
| #define SSPA_SP_MSL (1 << 18) /* Master Slave Configuration */ |
| #define SSPA_SP_CLKP (1 << 17) /* CLKP Polarity Clock Edge Select */ |
| #define SSPA_SP_FSP (1 << 16) /* FSP Polarity Clock Edge Select */ |
| #define SSPA_SP_FFLUSH (1 << 2) /* FIFO Flush */ |
| #define SSPA_SP_S_RST (1 << 1) /* Active High Reset Signal */ |
| #define SSPA_SP_S_EN (1 << 0) /* Serial Clock Domain Enable */ |
| #define SSPA_SP_FWID(x) ((x) << 20) /* Frame-Sync Width */ |
| #define SSPA_TXSP_FPER(x) ((x) << 4) /* Frame-Sync Active */ |
| |
| /* sspa clock sources */ |
| #define MMP_SSPA_CLK_PLL 0 |
| #define MMP_SSPA_CLK_VCXO 1 |
| #define MMP_SSPA_CLK_AUDIO 3 |
| |
| /* sspa pll id */ |
| #define MMP_SYSCLK 0 |
| #define MMP_SSPA_CLK 1 |
| |
| #endif /* _MMP_SSPA_H */ |
