| menuconfig SND_SOC_INTEL_MACH |
| bool "Intel Machine drivers" |
| depends on SND_SOC_INTEL_SST_TOPLEVEL |
| help |
| Intel ASoC Machine Drivers. If you have a Intel machine that |
| has an audio controller with a DSP and I2S or DMIC port, then |
| enable this option by saying Y |
| |
| Note that the answer to this question doesn't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about Intel ASoC machine drivers. |
| |
| if SND_SOC_INTEL_MACH |
| |
| if SND_SOC_INTEL_HASWELL |
| |
| config SND_SOC_INTEL_HASWELL_MACH |
| tristate "Haswell Lynxpoint" |
| depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM |
| select SND_SOC_RT5640 |
| help |
| This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell |
| Ultrabook platforms. This is a recommended option. |
| Say Y or m if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BDW_RT5677_MACH |
| tristate "Broadwell with RT5677 codec" |
| depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM && GPIOLIB |
| select SND_SOC_RT5677 |
| help |
| This adds support for Intel Broadwell platform based boards with |
| the RT5677 audio codec. This is a recommended option. |
| Say Y or m if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BROADWELL_MACH |
| tristate "Broadwell Wildcatpoint" |
| depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM |
| select SND_SOC_RT286 |
| help |
| This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell |
| Ultrabook platforms. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| endif ## SND_SOC_INTEL_HASWELL |
| |
| if SND_SOC_INTEL_BAYTRAIL |
| |
| config SND_SOC_INTEL_BYT_MAX98090_MACH |
| tristate "Baytrail with MAX98090 codec" |
| depends on X86_INTEL_LPSS && I2C |
| select SND_SOC_MAX98090 |
| help |
| This adds audio driver for Intel Baytrail platform based boards |
| with the MAX98090 audio codec. This driver is deprecated, use |
| SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH instead for better |
| functionality. |
| |
| config SND_SOC_INTEL_BYT_RT5640_MACH |
| tristate "Baytrail with RT5640 codec" |
| depends on X86_INTEL_LPSS && I2C |
| select SND_SOC_RT5640 |
| help |
| This adds audio driver for Intel Baytrail platform based boards |
| with the RT5640 audio codec. This driver is deprecated, use |
| SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality. |
| |
| endif ## SND_SOC_INTEL_BAYTRAIL |
| |
| if SND_SST_ATOM_HIFI2_PLATFORM |
| |
| config SND_SOC_INTEL_BYTCR_RT5640_MACH |
| tristate "Baytrail and Baytrail-CR with RT5640 codec" |
| depends on X86_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_ACPI |
| select SND_SOC_RT5640 |
| help |
| This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR |
| platforms with RT5640 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BYTCR_RT5651_MACH |
| tristate "Baytrail and Baytrail-CR with RT5651 codec" |
| depends on X86_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_ACPI |
| select SND_SOC_RT5651 |
| help |
| This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR |
| platforms with RT5651 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_CHT_BSW_RT5672_MACH |
| tristate "Cherrytrail & Braswell with RT5672 codec" |
| depends on X86_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_ACPI |
| select SND_SOC_RT5670 |
| help |
| This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell |
| platforms with RT5672 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_CHT_BSW_RT5645_MACH |
| tristate "Cherrytrail & Braswell with RT5645/5650 codec" |
| depends on X86_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_ACPI |
| select SND_SOC_RT5645 |
| help |
| This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell |
| platforms with RT5645/5650 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH |
| tristate "Cherrytrail & Braswell with MAX98090 & TI codec" |
| depends on X86_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_MAX98090 |
| select SND_SOC_TS3A227E |
| help |
| This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell |
| platforms with MAX98090 audio codec it also can support TI jack chip as aux device. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH |
| tristate "Cherrytrail & Braswell with NAU88L24 codec" |
| depends on X86_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_ACPI |
| select SND_SOC_NAU8824 |
| help |
| This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell |
| platforms with NAU88L24 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BYT_CHT_DA7213_MACH |
| tristate "Baytrail & Cherrytrail with DA7212/7213 codec" |
| depends on X86_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_ACPI |
| select SND_SOC_DA7213 |
| help |
| This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail |
| platforms with DA7212/7213 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BYT_CHT_ES8316_MACH |
| tristate "Baytrail & Cherrytrail with ES8316 codec" |
| depends on X86_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_ACPI |
| select SND_SOC_ES8316 |
| help |
| This adds support for ASoC machine driver for Intel(R) Baytrail & |
| Cherrytrail platforms with ES8316 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH |
| tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" |
| depends on X86_INTEL_LPSS && I2C && ACPI |
| help |
| This adds support for ASoC machine driver for the MinnowBoard Max or |
| Up boards and provides access to I2S signals on the Low-Speed |
| connector. This is not a recommended option outside of these cases. |
| It is not intended to be enabled by distros by default. |
| Say Y or m if you have such a device. |
| |
| If unsure select "N". |
| |
| endif ## SND_SST_ATOM_HIFI2_PLATFORM |
| |
| if SND_SOC_INTEL_SKYLAKE |
| |
| config SND_SOC_INTEL_SKL_RT286_MACH |
| tristate "SKL with RT286 I2S mode" |
| depends on MFD_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_RT286 |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| help |
| This adds support for ASoC machine driver for Skylake platforms |
| with RT286 I2S audio codec. |
| Say Y or m if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH |
| tristate "SKL with NAU88L25 and SSM4567 in I2S Mode" |
| depends on MFD_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_NAU8825 |
| select SND_SOC_SSM4567 |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for NAU88L25 + SSM4567. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH |
| tristate "SKL with NAU88L25 and MAX98357A in I2S Mode" |
| depends on MFD_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_NAU8825 |
| select SND_SOC_MAX98357A |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for NAU88L25 + MAX98357A. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH |
| tristate "Broxton with DA7219 and MAX98357A in I2S Mode" |
| depends on MFD_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_DA7219 |
| select SND_SOC_MAX98357A |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| select SND_HDA_DSP_LOADER |
| help |
| This adds support for ASoC machine driver for Broxton-P platforms |
| with DA7219 + MAX98357A I2S audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BXT_RT298_MACH |
| tristate "Broxton with RT298 I2S mode" |
| depends on MFD_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_RT298 |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| select SND_HDA_DSP_LOADER |
| help |
| This adds support for ASoC machine driver for Broxton platforms |
| with RT286 I2S audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH |
| tristate "KBL with RT5663 and MAX98927 in I2S Mode" |
| depends on MFD_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_RT5663 |
| select SND_SOC_MAX98927 |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| select SND_SOC_INTEL_SKYLAKE_SSP_CLK |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for RT5663 + MAX98927. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH |
| tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode" |
| depends on MFD_INTEL_LPSS && I2C && ACPI |
| depends on SPI |
| select SND_SOC_RT5663 |
| select SND_SOC_RT5514 |
| select SND_SOC_RT5514_SPI |
| select SND_SOC_MAX98927 |
| select SND_SOC_HDAC_HDMI |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for RT5663 + RT5514 + MAX98927. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH |
| tristate "KBL with DA7219 and MAX98357A in I2S Mode" |
| depends on MFD_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_DA7219 |
| select SND_SOC_MAX98357A |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for DA7219 + MAX98357A I2S audio codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH |
| tristate "GLK with RT5682 and MAX98357A in I2S Mode" |
| depends on MFD_INTEL_LPSS && I2C && ACPI |
| select SND_SOC_RT5682 |
| select SND_SOC_MAX98357A |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| select SND_HDA_DSP_LOADER |
| help |
| This adds support for ASoC machine driver for Geminilake platforms |
| with RT5682 + MAX98357A I2S audio codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| endif ## SND_SOC_INTEL_SKYLAKE |
| |
| endif ## SND_SOC_INTEL_MACH |
