/*
 * B4420DS Device Tree Source
 *
 * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * This software is provided by Freescale Semiconductor "as is" and any
 * express or implied warranties, including, but not limited to, the implied
 * warranties of merchantability and fitness for a particular purpose are
 * disclaimed. In no event shall Freescale Semiconductor be liable for any
 * direct, indirect, incidental, special, exemplary, or consequential damages
 * (including, but not limited to, procurement of substitute goods or services;
 * loss of use, data, or profits; or business interruption) however caused and
 * on any theory of liability, whether in contract, strict liability, or tort
 * (including negligence or otherwise) arising in any way out of the use of
 * this software, even if advised of the possibility of such damage.
 */

/ {
	model = "fsl,B4QDS";
	compatible = "fsl,B4QDS";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
		phy_sgmii_10 = &phy_sgmii_10;
		phy_sgmii_11 = &phy_sgmii_11;
		phy_sgmii_1c = &phy_sgmii_1c;
		phy_sgmii_1d = &phy_sgmii_1d;
	};

	ifc: localbus@ffe124000 {
		reg = <0xf 0xfe124000 0 0x2000>;
		ranges = <0 0 0xf 0xe8000000 0x08000000
			  2 0 0xf 0xff800000 0x00010000
			  3 0 0xf 0xffdf0000 0x00008000>;

		nor@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x8000000>;
			bank-width = <2>;
			device-width = <1>;
		};

		nand@2,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,ifc-nand";
			reg = <0x2 0x0 0x10000>;

			partition@0 {
				/* This location must not be altered  */
				/* 1MB for u-boot Bootloader Image */
				reg = <0x0 0x00100000>;
				label = "NAND U-Boot Image";
				read-only;
			};

			partition@100000 {
				/* 1MB for DTB Image */
				reg = <0x00100000 0x00100000>;
				label = "NAND DTB Image";
			};

			partition@200000 {
				/* 10MB for Linux Kernel Image */
				reg = <0x00200000 0x00A00000>;
				label = "NAND Linux Kernel Image";
			};

			partition@c00000 {
				/* 500MB for Root file System Image */
				reg = <0x00c00000 0x1F400000>;
				label = "NAND RFS Image";
			};
		};

		board-control@3,0 {
			compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis";
			reg = <3 0 0x300>;
		};
	};

	memory {
		device_type = "memory";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		bman_fbpr: bman-fbpr {
			size = <0 0x1000000>;
			alignment = <0 0x1000000>;
		};
		qman_fqd: qman-fqd {
			size = <0 0x400000>;
			alignment = <0 0x400000>;
		};
		qman_pfdr: qman-pfdr {
			size = <0 0x2000000>;
			alignment = <0 0x2000000>;
		};
	};

	dcsr: dcsr@f00000000 {
		ranges = <0x00000000 0xf 0x00000000 0x01052000>;
	};

	bportals: bman-portals@ff4000000 {
		ranges = <0x0 0xf 0xf4000000 0x2000000>;
	};

	qportals: qman-portals@ff6000000 {
		ranges = <0x0 0xf 0xf6000000 0x2000000>;
	};

	soc: soc@ffe000000 {
		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
		reg = <0xf 0xfe000000 0 0x00001000>;
		spi@110000 {
			flash@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "sst,sst25wf040", "jedec,spi-nor";
				reg = <0>;
				spi-max-frequency = <40000000>; /* input clock */
			};
		};

		sdhc@114000 {
			/*Disabled as there is no sdhc connector on B4420QDS board*/
			status = "disabled";
		};

		i2c@118000 {
			mux@77 {
				compatible = "nxp,pca9547";
				reg = <0x77>;
				#address-cells = <1>;
				#size-cells = <0>;

				i2c@0 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0>;

					eeprom@50 {
						compatible = "atmel,24c64";
						reg = <0x50>;
					};
					eeprom@51 {
						compatible = "atmel,24c256";
						reg = <0x51>;
					};
					eeprom@53 {
						compatible = "atmel,24c256";
						reg = <0x53>;
					};
					eeprom@57 {
						compatible = "atmel,24c256";
						reg = <0x57>;
					};
					rtc@68 {
						compatible = "dallas,ds3232";
						reg = <0x68>;
					};
				};

				i2c@2 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x2>;

					ina220@40 {
						compatible = "ti,ina220";
						reg = <0x40>;
						shunt-resistor = <1000>;
					};
				};

				i2c@3 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x3>;

					adt7461@4c {
						compatible = "adi,adt7461";
						reg = <0x4c>;
					};
				};
			};
		};

		usb@210000 {
			dr_mode = "host";
			phy_type = "ulpi";
		};

		fman@400000 {
			ethernet@e0000 {
				phy-handle = <&phy_sgmii_10>;
				phy-connection-type = "sgmii";
			};

			ethernet@e2000 {
				phy-handle = <&phy_sgmii_11>;
				phy-connection-type = "sgmii";
			};

			ethernet@e4000 {
				phy-handle = <&phy_sgmii_1c>;
				phy-connection-type = "sgmii";
			};

			ethernet@e6000 {
				phy-handle = <&phy_sgmii_1d>;
				phy-connection-type = "sgmii";
			};

			mdio@fc000 {
				phy_sgmii_10: ethernet-phy@10 {
					reg = <0x10>;
				};

				phy_sgmii_11: ethernet-phy@11 {
					reg = <0x11>;
				};

				phy_sgmii_1c: ethernet-phy@1c {
					reg = <0x1c>;
					status = "disabled";
				};

				phy_sgmii_1d: ethernet-phy@1d {
					reg = <0x1d>;
					status = "disabled";
				};
			};
		};
	};

	pci0: pcie@ffe200000 {
		reg = <0xf 0xfe200000 0 0x10000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};
};

/include/ "b4si-post.dtsi"