diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index e6ded33..9d34ce2 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -55,6 +55,8 @@
 #ifdef CONFIG_SMP
 	  {
 		long cpu;
+
+		local_irq_disable();
 		smp_percpu_timer_interrupt(regs);
 		cpu = smp_processor_id();
 		if (cpu != boot_cpuid) {
diff --git a/arch/arm/configs/omnimeter_defconfig b/arch/arm/configs/omnimeter_defconfig
deleted file mode 100644
index 78fdb4a..0000000
--- a/arch/arm/configs/omnimeter_defconfig
+++ /dev/null
@@ -1,803 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:31:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-CONFIG_I82365=y
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd mem=16M root=/dev/ram ramdisk=8192 initrd=0xd0000000,4M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-CONFIG_PCMCIA_WAVELAN=y
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_AIRO_CS=y
-CONFIG_PCMCIA_WL3501=y
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=y
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index bd4823c..1155cf0 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -344,9 +344,9 @@
 	str	r6, [r0]
 #endif
 
+#ifdef CONFIG_DEBUG_LL
 	bic	r7, r7, #0x0c			@ turn off cacheable
 						@ and bufferable bits
-#ifdef CONFIG_DEBUG_LL
 	/*
 	 * Map in IO space for serial debugging.
 	 * This allows debug messages to be output
@@ -372,28 +372,24 @@
 	teq	r1, #MACH_TYPE_NETWINDER
 	teqne	r1, #MACH_TYPE_CATS
 	bne	1f
-	add	r0, r4, #0x3fc0			@ ff000000
-	mov	r3, #0x7c000000
-	orr	r3, r3, r7
-	str	r3, [r0], #4
-	add	r3, r3, #1 << 20
-	str	r3, [r0], #4
+	add	r0, r4, #0xff000000 >> 18
+	orr	r3, r7, #0x7c000000
+	str	r3, [r0]
 1:
 #endif
-#endif
 #ifdef CONFIG_ARCH_RPC
 	/*
 	 * Map in screen at 0x02000000 & SCREEN2_BASE
 	 * Similar reasons here - for debug.  This is
 	 * only for Acorn RiscPC architectures.
 	 */
-	add	r0, r4, #0x80			@ 02000000
-	mov	r3, #0x02000000
-	orr	r3, r3, r7
+	add	r0, r4, #0x02000000 >> 18
+	orr	r3, r7, #0x02000000
 	str	r3, [r0]
-	add	r0, r4, #0x3600			@ d8000000
+	add	r0, r4, #0xd8000000 >> 18
 	str	r3, [r0]
 #endif
+#endif
 	mov	pc, lr
 	.ltorg
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 35b7273..c9b6977 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -737,8 +737,8 @@
 	if (mdesc->soft_reboot)
 		reboot_setup("s");
 
-	if (mdesc->param_offset)
-		tags = phys_to_virt(mdesc->param_offset);
+	if (mdesc->boot_params)
+		tags = phys_to_virt(mdesc->boot_params);
 
 	/*
 	 * If we have the old style parameters, convert them to
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index 5417ca3..c9d8998 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -40,9 +40,11 @@
 }
 
 MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
-	MAINTAINER("Nicolas Bellido Y Ortega")
-	BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE)
-	MAPIO(aaed2000_map_io)
-	INITIRQ(aaed2000_init_irq)
+	/* Maintainer: Nicolas Bellido Y Ortega */
+	.phys_ram	= 0xf0000000,
+	.phys_io	= PIO_BASE,
+	.io_pg_offst	= ((VIO_BASE) >> 18) & 0xfffc,
+	.map_io		= aaed2000_map_io,
+	.init_irq	= aaed2000_init_irq,
 	.timer		= &aaec2000_timer,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index c106704..dc73feb 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -59,11 +59,13 @@
 }
 
 MACHINE_START(AUTCPU12, "autronix autcpu12")
-	MAINTAINER("Thomas Gleixner")
-        BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
-	BOOT_PARAMS(0xc0020000)
-	MAPIO(autcpu12_map_io)
-	INITIRQ(clps711x_init_irq)
+	/* Maintainer: Thomas Gleixner */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0020000,
+	.map_io		= autcpu12_map_io,
+	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END
 
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 7664f9c..a46c82c 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -49,10 +49,12 @@
 }
 
 MACHINE_START(CDB89712, "Cirrus-CDB89712")
-	MAINTAINER("Ray Lehtiniemi")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
-	BOOT_PARAMS(0xc0000100)
-	MAPIO(cdb89712_map_io)
-	INITIRQ(clps711x_init_irq)
+	/* Maintainer: Ray Lehtiniemi */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= cdb89712_map_io,
+	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index e4093be..780d918 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -53,10 +53,12 @@
 
 
 MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
-	MAINTAINER("Rob Scott")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
-	BOOT_PARAMS(0xc0000100)
-	MAPIO(ceiva_map_io)
-	INITIRQ(clps711x_init_irq)
+	/* Maintainer: Rob Scott */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= ceiva_map_io,
+	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 9ca21cb..c83f3fd 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -37,12 +37,14 @@
 
 
 MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
-	MAINTAINER("Nobody")
-        BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
-	BOOT_PARAMS(0xc0000100)
-	FIXUP(fixup_clep7312)
-	MAPIO(clps711x_map_io)
-	INITIRQ(clps711x_init_irq)
+	/* Maintainer: Nobody */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.fixup		= fixup_clep7312,
+	.map_io		= clps711x_map_io,
+	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END
 
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index c6c4632..255c98b 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -51,11 +51,13 @@
 }
 
 MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
-	MAINTAINER("Jon McClintock")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
-	BOOT_PARAMS(0xc0020100)	/* 0xc0000000 - 0xc001ffff can be video RAM */
-	FIXUP(fixup_edb7211)
-	MAPIO(edb7211_map_io)
-	INITIRQ(clps711x_init_irq)
+	/* Maintainer: Jon McClintock */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0020100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
+	.fixup		= fixup_edb7211,
+	.map_io		= edb7211_map_io,
+	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index c1c5b8e..f83a597 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -75,11 +75,13 @@
 }
 
 MACHINE_START(FORTUNET, "ARM-FortuNet")
-	MAINTAINER("FortuNet Inc.")
-        BOOT_MEM(0xc0000000, 0x80000000, 0xf0000000)
-	BOOT_PARAMS(0x00000000)
-	FIXUP(fortunet_fixup)
-	MAPIO(clps711x_map_io)
-	INITIRQ(clps711x_init_irq)
+	/* Maintainer: FortuNet Inc. */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000000,
+	.fixup		= fortunet_fixup,
+	.map_io		= clps711x_map_io,
+	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 29269df..5bdb90e 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -79,12 +79,14 @@
 }
 
 MACHINE_START(P720T, "ARM-Prospector720T")
-	MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
-	BOOT_PARAMS(0xc0000100)
-	FIXUP(fixup_p720t)
-	MAPIO(p720t_map_io)
-	INITIRQ(clps711x_init_irq)
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.fixup		= fixup_p720t,
+	.map_io		= p720t_map_io,
+	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END
 
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index 90e85f43..112f1d68 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -366,11 +366,13 @@
 }
 
 MACHINE_START(CLPS7500, "CL-PS7500")
-	MAINTAINER("Philip Blundell")
-	BOOT_MEM(0x10000000, 0x03000000, 0xe0000000)
-	MAPIO(clps7500_map_io)
-	INITIRQ(clps7500_init_irq)
-		.init_machine	= clps7500_init,
-		.timer		= &clps7500_timer,
+	/* Maintainer: Philip Blundell */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0x03000000,
+	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
+	.map_io		= clps7500_map_io,
+	.init_irq	= clps7500_init_irq,
+	.init_machine	= clps7500_init,
+	.timer		= &clps7500_timer,
 MACHINE_END
 
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 86ffdbb..23c4da1 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -233,13 +233,15 @@
 arch_initcall(ebsa110_init);
 
 MACHINE_START(EBSA110, "EBSA110")
-	MAINTAINER("Russell King")
-	BOOT_MEM(0x00000000, 0xe0000000, 0xe0000000)
-	BOOT_PARAMS(0x00000400)
-	DISABLE_PARPORT(0)
-	DISABLE_PARPORT(2)
-	SOFT_REBOOT
-	MAPIO(ebsa110_map_io)
-	INITIRQ(ebsa110_init_irq)
+	/* Maintainer: Russell King */
+	.phys_ram	= 0x00000000,
+	.phys_io	= 0xe0000000,
+	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000400,
+	.reserve_lp0	= 1,
+	.reserve_lp2	= 1,
+	.soft_reboot	= 1,
+	.map_io		= ebsa110_map_io,
+	.init_irq	= ebsa110_init_irq,
 	.timer		= &ebsa110_timer,
 MACHINE_END
diff --git a/arch/arm/mach-epxa10db/arch.c b/arch/arm/mach-epxa10db/arch.c
index 1b40340..7daa021 100644
--- a/arch/arm/mach-epxa10db/arch.c
+++ b/arch/arm/mach-epxa10db/arch.c
@@ -63,10 +63,12 @@
 extern struct sys_timer epxa10db_timer;
 
 MACHINE_START(CAMELOT, "Altera Epxa10db")
-	MAINTAINER("Altera Corporation")
-	BOOT_MEM(0x00000000, 0x7fffc000, 0xffffc000)
-	MAPIO(epxa10db_map_io)
-	INITIRQ(epxa10db_init_irq)
+	/* Maintainer: Altera Corporation */
+	.phys_ram	= 0x00000000,
+	.phys_io	= 0x7fffc000,
+	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
+	.map_io		= epxa10db_map_io,
+	.init_irq	= epxa10db_init_irq,
 	.timer		= &epxa10db_timer,
 MACHINE_END
 
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index d1ced86..49b898a 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -84,12 +84,14 @@
 }
 
 MACHINE_START(CATS, "Chalice-CATS")
-	MAINTAINER("Philip Blundell")
-	BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000)
-	BOOT_PARAMS(0x00000100)
-	SOFT_REBOOT
-	FIXUP(fixup_cats)
-	MAPIO(footbridge_map_io)
-	INITIRQ(footbridge_init_irq)
+	/* Maintainer: Philip Blundell */
+	.phys_ram	= 0x00000000,
+	.phys_io	= DC21285_ARMCSR_BASE,
+	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.soft_reboot	= 1,
+	.fixup		= fixup_cats,
+	.map_io		= footbridge_map_io,
+	.init_irq	= footbridge_init_irq,
 	.timer		= &isa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-footbridge/co285.c b/arch/arm/mach-footbridge/co285.c
index e154191..548a790 100644
--- a/arch/arm/mach-footbridge/co285.c
+++ b/arch/arm/mach-footbridge/co285.c
@@ -28,11 +28,13 @@
 }
 
 MACHINE_START(CO285, "co-EBSA285")
-	MAINTAINER("Mark van Doesburg")
-	BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0x7cf00000)
-	FIXUP(fixup_coebsa285)
-	MAPIO(footbridge_map_io)
-	INITIRQ(footbridge_init_irq)
+	/* Maintainer: Mark van Doesburg */
+	.phys_ram	= 0x00000000,
+	.phys_io	= DC21285_ARMCSR_BASE,
+	.io_pg_offst	= ((0x7cf00000) >> 18) & 0xfffc,
+	.fixup		= fixup_coebsa285,
+	.map_io		= footbridge_map_io,
+	.init_irq	= footbridge_init_irq,
 	.timer		= &footbridge_timer,
 MACHINE_END
 
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index d0931f5a..1c37605 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -13,12 +13,15 @@
 #include "common.h"
 
 MACHINE_START(EBSA285, "EBSA285")
-	MAINTAINER("Russell King")
-	BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000)
-	BOOT_PARAMS(0x00000100)
-	VIDEO(0x000a0000, 0x000bffff)
-	MAPIO(footbridge_map_io)
-	INITIRQ(footbridge_init_irq)
+	/* Maintainer: Russell King */
+	.phys_ram	= 0x00000000,
+	.phys_io	= DC21285_ARMCSR_BASE,
+	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.video_start	= 0x000a0000,
+	.video_end	= 0x000bffff,
+	.map_io		= footbridge_map_io,
+	.init_irq	= footbridge_init_irq,
 	.timer		= &footbridge_timer,
 MACHINE_END
 
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 1e1dfd7..775f85f 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -647,14 +647,17 @@
 }
 
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
-	MAINTAINER("Russell King/Rebel.com")
-	BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000)
-	BOOT_PARAMS(0x00000100)
-	VIDEO(0x000a0000, 0x000bffff)
-	DISABLE_PARPORT(0)
-	DISABLE_PARPORT(2)
-	FIXUP(fixup_netwinder)
-	MAPIO(footbridge_map_io)
-	INITIRQ(footbridge_init_irq)
+	/* Maintainer: Russell King/Rebel.com */
+	.phys_ram	= 0x00000000,
+	.phys_io	= DC21285_ARMCSR_BASE,
+	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.video_start	= 0x000a0000,
+	.video_end	= 0x000bffff,
+	.reserve_lp0	= 1,
+	.reserve_lp2	= 1,
+	.fixup		= fixup_netwinder,
+	.map_io		= footbridge_map_io,
+	.init_irq	= footbridge_init_irq,
 	.timer		= &isa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index 415086d..0146b8b 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -13,11 +13,13 @@
 #include "common.h"
 
 MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
-	MAINTAINER("Jamey Hicks / George France")
-	BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000)
-	BOOT_PARAMS(0x00000100)
-	MAPIO(footbridge_map_io)
-	INITIRQ(footbridge_init_irq)
+	/* Maintainer: Jamey Hicks / George France */
+	.phys_ram	= 0x00000000,
+	.phys_io	= DC21285_ARMCSR_BASE,
+	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= footbridge_map_io,
+	.init_irq	= footbridge_init_irq,
 	.timer		= &footbridge_timer,
 MACHINE_END
 
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 9b24b9b..fa59e9e 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -30,10 +30,12 @@
 #include "common.h"
 
 MACHINE_START(H7201, "Hynix GMS30C7201")
-	MAINTAINER("Robert Schwebel, Pengutronix")
-	BOOT_MEM(0x40000000, 0x80000000, 0xf0000000)
-	BOOT_PARAMS(0xc0001000)
-	MAPIO(h720x_map_io)
-	INITIRQ(h720x_init_irq)
-	.timer = &h7201_timer,
+	/* Maintainer: Robert Schwebel, Pengutronix */
+	.phys_ram	= 0x40000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0001000,
+	.map_io		= h720x_map_io,
+	.init_irq	= h720x_init_irq,
+	.timer		= &h7201_timer,
 MACHINE_END
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 3456a00..db9078a 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -71,11 +71,13 @@
 }
 
 MACHINE_START(H7202, "Hynix HMS30C7202")
-	MAINTAINER("Robert Schwebel, Pengutronix")
-	BOOT_MEM(0x40000000, 0x80000000, 0xf0000000)
-	BOOT_PARAMS(0x40000100)
-	MAPIO(h720x_map_io)
-	INITIRQ(h7202_init_irq)
-	.timer = &h7202_timer,
-	INIT_MACHINE(init_eval_h7202)
+	/* Maintainer: Robert Schwebel, Pengutronix */
+	.phys_ram	= 0x40000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x40000100,
+	.map_io		= h720x_map_io,
+	.init_irq	= h7202_init_irq,
+	.timer		= &h7202_timer,
+	.init_machine	= init_eval_h7202,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index 625dd01..5d25434 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -78,11 +78,13 @@
 }
 
 MACHINE_START(MX1ADS, "Motorola MX1ADS")
-	MAINTAINER("Sascha Hauer, Pengutronix")
-	BOOT_MEM(0x08000000, 0x00200000, 0xe0200000)
-	BOOT_PARAMS(0x08000100)
-	MAPIO(mx1ads_map_io)
-	INITIRQ(imx_init_irq)
+	/* Maintainer: Sascha Hauer, Pengutronix */
+	.phys_ram	= 0x08000000,
+	.phys_io	= 0x00200000,
+	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
+	.boot_params	= 0x08000100,
+	.map_io		= mx1ads_map_io,
+	.init_irq	= imx_init_irq,
 	.timer		= &imx_timer,
-	INIT_MACHINE(mx1ads_init)
+	.init_machine	= mx1ads_init,
 MACHINE_END
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 91ba9fd..36e2b6e 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -292,11 +292,13 @@
 };
 
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
-	MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
-	BOOT_MEM(0x00000000, 0x16000000, 0xf1600000)
-	BOOT_PARAMS(0x00000100)
-	MAPIO(ap_map_io)
-	INITIRQ(ap_init_irq)
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_ram	= 0x00000000,
+	.phys_io	= 0x16000000,
+	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ap_map_io,
+	.init_irq	= ap_init_irq,
 	.timer		= &ap_timer,
-	INIT_MACHINE(ap_init)
+	.init_machine	= ap_init,
 MACHINE_END
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index e0a01ee..569f328 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -532,11 +532,13 @@
 };
 
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
-	MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
-	BOOT_MEM(0x00000000, 0x16000000, 0xf1600000)
-	BOOT_PARAMS(0x00000100)
-	MAPIO(intcp_map_io)
-	INITIRQ(intcp_init_irq)
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_ram	= 0x00000000,
+	.phys_io	= 0x16000000,
+	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= intcp_map_io,
+	.init_irq	= intcp_init_irq,
 	.timer		= &cp_timer,
-	INIT_MACHINE(intcp_init)
+	.init_machine	= intcp_init,
 MACHINE_END
diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c
index bf23e0f..0f921ba 100644
--- a/arch/arm/mach-iop3xx/iop321-setup.c
+++ b/arch/arm/mach-iop3xx/iop321-setup.c
@@ -146,23 +146,27 @@
 
 #if defined(CONFIG_ARCH_IQ80321)
 MACHINE_START(IQ80321, "Intel IQ80321")
-	MAINTAINER("Intel Corporation")
-	BOOT_MEM(PHYS_OFFSET, IQ80321_UART, IQ80321_UART)
-	MAPIO(iq80321_map_io)
-	INITIRQ(iop321_init_irq)
+	/* Maintainer: Intel Corporation */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IQ80321_UART,
+	.io_pg_offst	= ((IQ80321_UART) >> 18) & 0xfffc,
+	.map_io		= iq80321_map_io,
+	.init_irq	= iop321_init_irq,
 	.timer		= &iop321_timer,
-    BOOT_PARAMS(0xa0000100)
-	INIT_MACHINE(iop32x_init)
+	.boot_params	= 0xa0000100,
+	.init_machine	= iop32x_init,
 MACHINE_END
 #elif defined(CONFIG_ARCH_IQ31244)
 MACHINE_START(IQ31244, "Intel IQ31244")
-    MAINTAINER("Intel Corp.")
-    BOOT_MEM(PHYS_OFFSET, IQ31244_UART, IQ31244_UART)
-    MAPIO(iq31244_map_io)
-    INITIRQ(iop321_init_irq)
+	/* Maintainer: Intel Corp. */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IQ31244_UART,
+	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
+	.map_io		= iq31244_map_io,
+	.init_irq	= iop321_init_irq,
 	.timer		= &iop321_timer,
-    BOOT_PARAMS(0xa0000100)
-	INIT_MACHINE(iop32x_init)
+	.boot_params	= 0xa0000100,
+	.init_machine	= iop32x_init,
 MACHINE_END
 #else
 #error No machine descriptor defined for this IOP3XX implementation
diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c
index 622e7914..fc74b72 100644
--- a/arch/arm/mach-iop3xx/iop331-setup.c
+++ b/arch/arm/mach-iop3xx/iop331-setup.c
@@ -148,26 +148,28 @@
 
 #if defined(CONFIG_ARCH_IQ80331)
 MACHINE_START(IQ80331, "Intel IQ80331")
-    MAINTAINER("Intel Corp.")
-    BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical
-    //BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS)
-    MAPIO(iq80331_map_io)
-    INITIRQ(iop331_init_irq)
+	/* Maintainer: Intel Corp. */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= 0xfefff000,
+	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
+	.map_io		= iq80331_map_io,
+	.init_irq	= iop331_init_irq,
 	.timer		= &iop331_timer,
-    BOOT_PARAMS(0x0100)
-	INIT_MACHINE(iop33x_init)
+	.boot_params	= 0x0100,
+	.init_machine	= iop33x_init,
 MACHINE_END
 
 #elif defined(CONFIG_MACH_IQ80332)
 MACHINE_START(IQ80332, "Intel IQ80332")
-    MAINTAINER("Intel Corp.")
-    BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical
-    //BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS)
-    MAPIO(iq80332_map_io)
-    INITIRQ(iop331_init_irq)
+	/* Maintainer: Intel Corp. */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= 0xfefff000,
+	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
+	.map_io		= iq80332_map_io,
+	.init_irq	= iop331_init_irq,
 	.timer		= &iop331_timer,
-    BOOT_PARAMS(0x0100)
-	INIT_MACHINE(iop33x_init)
+	.boot_params	= 0x0100,
+	.init_machine	= iop33x_init,
 MACHINE_END
 
 #else
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index f3a291b..b7ebf38 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -223,13 +223,15 @@
 
 
 MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
-	MAINTAINER("Lennert Buytenhek <buytenh@wantstofly.org>")
-	BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE)
-	BOOT_PARAMS(0x00000100)
-	MAPIO(ixp2000_map_io)
-	INITIRQ(ixp2000_init_irq)
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_ram	= 0x00000000,
+	.phys_io	= IXP2000_UART_PHYS_BASE,
+	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ixp2000_map_io,
+	.init_irq	= ixp2000_init_irq,
 	.timer		= &enp2611_timer,
-	INIT_MACHINE(enp2611_init_machine)
+	.init_machine	= enp2611_init_machine,
 MACHINE_END
 
 
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index df3ff26..fd280a9 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -168,12 +168,14 @@
 }
 
 MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
-	MAINTAINER("MontaVista Software, Inc.")
-	BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE)
-	BOOT_PARAMS(0x00000100)
-	MAPIO(ixdp2x00_map_io)
-	INITIRQ(ixdp2400_init_irq)
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= 0x00000000,
+	.phys_io	= IXP2000_UART_PHYS_BASE,
+	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ixdp2x00_map_io,
+	.init_irq	= ixdp2400_init_irq,
 	.timer		= &ixdp2400_timer,
-	INIT_MACHINE(ixdp2x00_init_machine)
+	.init_machine	= ixdp2x00_init_machine,
 MACHINE_END
 
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 468a4bb..f9073aa 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -284,12 +284,14 @@
 }
 
 MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
-	MAINTAINER("MontaVista Software, Inc.")
-	BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE)
-	BOOT_PARAMS(0x00000100)
-	MAPIO(ixdp2x00_map_io)
-	INITIRQ(ixdp2800_init_irq)
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= 0x00000000,
+	.phys_io	= IXP2000_UART_PHYS_BASE,
+	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ixdp2x00_map_io,
+	.init_irq	= ixdp2800_init_irq,
 	.timer		= &ixdp2800_timer,
-	INIT_MACHINE(ixdp2x00_init_machine)
+	.init_machine	= ixdp2x00_init_machine,
 MACHINE_END
 
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index e94dace..c735887 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -375,25 +375,29 @@
 
 #ifdef CONFIG_ARCH_IXDP2401
 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
-	MAINTAINER("MontaVista Software, Inc.")
-	BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE)
-	BOOT_PARAMS(0x00000100)
-	MAPIO(ixdp2x01_map_io)
-	INITIRQ(ixdp2x01_init_irq)
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= 0x00000000,
+	.phys_io	= IXP2000_UART_PHYS_BASE,
+	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ixdp2x01_map_io,
+	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
-	INIT_MACHINE(ixdp2x01_init_machine)
+	.init_machine	= ixdp2x01_init_machine,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_IXDP2801
 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
-	MAINTAINER("MontaVista Software, Inc.")
-	BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE)
-	BOOT_PARAMS(0x00000100)
-	MAPIO(ixdp2x01_map_io)
-	INITIRQ(ixdp2x01_init_irq)
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= 0x00000000,
+	.phys_io	= IXP2000_UART_PHYS_BASE,
+	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ixdp2x01_map_io,
+	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
-	INIT_MACHINE(ixdp2x01_init_machine)
+	.init_machine	= ixdp2x01_init_machine,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 8a05a12..c6335f5 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -100,14 +100,15 @@
 
 #ifdef CONFIG_ARCH_ADI_COYOTE
 MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
-        MAINTAINER("MontaVista Software, Inc.")
-        BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
-                IXP4XX_PERIPHERAL_BASE_VIRT)
-        MAPIO(coyote_map_io)
-        INITIRQ(ixp4xx_init_irq)
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= coyote_map_io,
+	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-        BOOT_PARAMS(0x0100)
-	INIT_MACHINE(coyote_init)
+	.boot_params	= 0x0100,
+	.init_machine	= coyote_init,
 MACHINE_END
 #endif
 
@@ -117,14 +118,15 @@
  */
 #ifdef CONFIG_MACH_IXDPG425
 MACHINE_START(IXDPG425, "Intel IXDPG425")
-        MAINTAINER("MontaVista Software, Inc.")
-        BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
-                IXP4XX_PERIPHERAL_BASE_VIRT)
-        MAPIO(coyote_map_io)
-        INITIRQ(ixp4xx_init_irq)
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= coyote_map_io,
+	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-        BOOT_PARAMS(0x0100)
-	INIT_MACHINE(coyote_init)
+	.boot_params	= 0x0100,
+	.init_machine	= coyote_init,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index e77c86e..8ba1cd9 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -140,14 +140,15 @@
 
 
 MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
-        MAINTAINER("George Joseph")
-        BOOT_MEM(PHYS_OFFSET, IXP4XX_UART2_BASE_PHYS,
-                IXP4XX_UART2_BASE_VIRT)
-        MAPIO(gtwx5715_map_io)
-        INITIRQ(ixp4xx_init_irq)
-		  .timer		= &ixp4xx_timer,
-        BOOT_PARAMS(0x0100)
-        INIT_MACHINE(gtwx5715_init)
+	/* Maintainer: George Joseph */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IXP4XX_UART2_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= gtwx5715_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= gtwx5715_init,
 MACHINE_END
 
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 77346c1..f2e9c0e 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -128,36 +128,39 @@
 }
 
 MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
-	MAINTAINER("MontaVista Software, Inc.")
-	BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
-		IXP4XX_PERIPHERAL_BASE_VIRT)
-	MAPIO(ixdp425_map_io)
-	INITIRQ(ixp4xx_init_irq)
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixdp425_map_io,
+	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	BOOT_PARAMS(0x0100)
-	INIT_MACHINE(ixdp425_init)
+	.boot_params	= 0x0100,
+	.init_machine	= ixdp425_init,
 MACHINE_END
 
 MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
-	MAINTAINER("MontaVista Software, Inc.")
-	BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
-		IXP4XX_PERIPHERAL_BASE_VIRT)
-	MAPIO(ixdp425_map_io)
-	INITIRQ(ixp4xx_init_irq)
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixdp425_map_io,
+	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	BOOT_PARAMS(0x0100)
-	INIT_MACHINE(ixdp425_init)
+	.boot_params	= 0x0100,
+	.init_machine	= ixdp425_init,
 MACHINE_END
 
 MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
-	MAINTAINER("MontaVista Software, Inc.")
-	BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
-		IXP4XX_PERIPHERAL_BASE_VIRT)
-	MAPIO(ixdp425_map_io)
-	INITIRQ(ixp4xx_init_irq)
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixdp425_map_io,
+	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	BOOT_PARAMS(0x0100)
-	INIT_MACHINE(ixdp425_init)
+	.boot_params	= 0x0100,
+	.init_machine	= ixdp425_init,
 MACHINE_END
 
 /*
@@ -168,14 +171,15 @@
  */
 #ifdef CONFIG_ARCH_AVILA
 MACHINE_START(AVILA, "Gateworks Avila Network Platform")
-	MAINTAINER("Deepak Saxena <dsaxena@plexity.net>")
-	BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
-		IXP4XX_PERIPHERAL_BASE_VIRT)
-	MAPIO(ixdp425_map_io)
-	INITIRQ(ixp4xx_init_irq)
+	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
+	.phys_ram	= PHYS_OFFSET,
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixdp425_map_io,
+	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	BOOT_PARAMS(0x0100)
-	INIT_MACHINE(ixdp425_init)
+	.boot_params	= 0x0100,
+	.init_machine	= ixdp425_init,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
index 606ca95..2a7fee2 100644
--- a/arch/arm/mach-l7200/core.c
+++ b/arch/arm/mach-l7200/core.c
@@ -81,9 +81,11 @@
 }
 
 MACHINE_START(L7200, "LinkUp Systems L7200")
-	MAINTAINER("Steve Hill / Scott McConnell")
-	BOOT_MEM(0xf0000000, 0x80040000, 0xd0000000)
-	MAPIO(l7200_map_io)
-	INITIRQ(l7200_init_irq)
+	/* Maintainer: Steve Hill / Scott McConnell */
+	.phys_ram	= 0xf0000000,
+	.phys_io	= 0x80040000,
+	.io_pg_offst	= ((0xd0000000) >> 18) & 0xfffc,
+	.map_io		= l7200_map_io,
+	.init_irq	= l7200_init_irq,
 MACHINE_END
 
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index be5d17f..cb3dcd3 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -102,10 +102,12 @@
 }
 
 MACHINE_START (KEV7A400, "Sharp KEV7a400")
-	MAINTAINER ("Marc Singer")
-	BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000))
-	BOOT_PARAMS (0xc0000100)
-	MAPIO (kev7a400_map_io)
-	INITIRQ (lh7a400_init_irq)
+	/* Maintainer: Marc Singer */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= kev7a400_map_io,
+	.init_irq	= lh7a400_init_irq,
 	.timer		= &lh7a40x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index c823447..6eb61a1 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -260,13 +260,15 @@
 #ifdef CONFIG_MACH_LPD7A400
 
 MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10")
-	MAINTAINER ("Marc Singer")
-	BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000))
-	BOOT_PARAMS (0xc0000100)
-	MAPIO (lpd7a400_map_io)
-	INITIRQ (lh7a400_init_irq)
+	/* Maintainer: Marc Singer */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= lpd7a400_map_io,
+	.init_irq	= lh7a400_init_irq,
 	.timer		= &lh7a40x_timer,
-	INIT_MACHINE (lpd7a40x_init)
+	.init_machine	= lpd7a40x_init,
 MACHINE_END
 
 #endif
@@ -274,13 +276,15 @@
 #ifdef CONFIG_MACH_LPD7A404
 
 MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
-	MAINTAINER ("Marc Singer")
-	BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000))
-	BOOT_PARAMS (0xc0000100)
-	MAPIO (lpd7a400_map_io)
-	INITIRQ (lh7a404_init_irq)
+	/* Maintainer: Marc Singer */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= lpd7a400_map_io,
+	.init_irq	= lh7a404_init_irq,
 	.timer		= &lh7a40x_timer,
-	INIT_MACHINE (lpd7a40x_init)
+	.init_machine	= lpd7a40x_init,
 MACHINE_END
 
 #endif
diff --git a/arch/arm/mach-omap/board-generic.c b/arch/arm/mach-omap/board-generic.c
index 2102a2c..384bc7c 100644
--- a/arch/arm/mach-omap/board-generic.c
+++ b/arch/arm/mach-omap/board-generic.c
@@ -88,11 +88,13 @@
 }
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
-	MAINTAINER("Tony Lindgren <tony@atomide.com>")
-	BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
-	BOOT_PARAMS(0x10000100)
-	MAPIO(omap_generic_map_io)
-	INITIRQ(omap_generic_init_irq)
-	INIT_MACHINE(omap_generic_init)
+	/* Maintainer: Tony Lindgren <tony@atomide.com> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_generic_map_io,
+	.init_irq	= omap_generic_init_irq,
+	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap/board-h2.c b/arch/arm/mach-omap/board-h2.c
index 1f06783..f37c76a 100644
--- a/arch/arm/mach-omap/board-h2.c
+++ b/arch/arm/mach-omap/board-h2.c
@@ -177,11 +177,13 @@
 }
 
 MACHINE_START(OMAP_H2, "TI-H2")
-	MAINTAINER("Imre Deak <imre.deak@nokia.com>")
-	BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
-	BOOT_PARAMS(0x10000100)
-	MAPIO(h2_map_io)
-	INITIRQ(h2_init_irq)
-	INIT_MACHINE(h2_init)
+	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= h2_map_io,
+	.init_irq	= h2_init_irq,
+	.init_machine	= h2_init,
 	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap/board-h3.c b/arch/arm/mach-omap/board-h3.c
index 486a5a0..705e485 100644
--- a/arch/arm/mach-omap/board-h3.c
+++ b/arch/arm/mach-omap/board-h3.c
@@ -195,11 +195,13 @@
 }
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
-	MAINTAINER("Texas Instruments, Inc.")
-	BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
-	BOOT_PARAMS(0x10000100)
-	MAPIO(h3_map_io)
-	INITIRQ(h3_init_irq)
-	INIT_MACHINE(h3_init)
+	/* Maintainer: Texas Instruments, Inc. */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= h3_map_io,
+	.init_irq	= h3_init_irq,
+	.init_machine	= h3_init,
 	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap/board-innovator.c b/arch/arm/mach-omap/board-innovator.c
index 57cf4da..523363f 100644
--- a/arch/arm/mach-omap/board-innovator.c
+++ b/arch/arm/mach-omap/board-innovator.c
@@ -270,11 +270,13 @@
 }
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
-	MAINTAINER("MontaVista Software, Inc.")
-	BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
-	BOOT_PARAMS(0x10000100)
-	MAPIO(innovator_map_io)
-	INITIRQ(innovator_init_irq)
-	INIT_MACHINE(innovator_init)
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= innovator_map_io,
+	.init_irq	= innovator_init_irq,
+	.init_machine	= innovator_init,
 	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap/board-netstar.c b/arch/arm/mach-omap/board-netstar.c
index 54acbd2..8c65373 100644
--- a/arch/arm/mach-omap/board-netstar.c
+++ b/arch/arm/mach-omap/board-netstar.c
@@ -141,11 +141,13 @@
 postcore_initcall(netstar_late_init);
 
 MACHINE_START(NETSTAR, "NetStar OMAP5910")
-	MAINTAINER("Ladislav Michl <michl@2n.cz>")
-	BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
-	BOOT_PARAMS(0x10000100)
-	MAPIO(netstar_map_io)
-	INITIRQ(netstar_init_irq)
-	INIT_MACHINE(netstar_init)
-	.timer = &omap_timer,
+	/* Maintainer: Ladislav Michl <michl@2n.cz> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= netstar_map_io,
+	.init_irq	= netstar_init_irq,
+	.init_machine	= netstar_init,
+	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap/board-osk.c b/arch/arm/mach-omap/board-osk.c
index a951fc8..cb43343 100644
--- a/arch/arm/mach-omap/board-osk.c
+++ b/arch/arm/mach-omap/board-osk.c
@@ -159,11 +159,13 @@
 }
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
-	MAINTAINER("Dirk Behme <dirk.behme@de.bosch.com>")
-	BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
-	BOOT_PARAMS(0x10000100)
-	MAPIO(osk_map_io)
-	INITIRQ(osk_init_irq)
-	INIT_MACHINE(osk_init)
+	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= osk_map_io,
+	.init_irq	= osk_init_irq,
+	.init_machine	= osk_init,
 	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap/board-perseus2.c b/arch/arm/mach-omap/board-perseus2.c
index 64515ae..d534204 100644
--- a/arch/arm/mach-omap/board-perseus2.c
+++ b/arch/arm/mach-omap/board-perseus2.c
@@ -179,11 +179,13 @@
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
-	MAINTAINER("Kevin Hilman <kjh@hilman.org>")
-	BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
-	BOOT_PARAMS(0x10000100)
-	MAPIO(omap_perseus2_map_io)
-	INITIRQ(omap_perseus2_init_irq)
-	INIT_MACHINE(omap_perseus2_init)
+	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_perseus2_map_io,
+	.init_irq	= omap_perseus2_init_irq,
+	.init_machine	= omap_perseus2_init,
 	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap/board-voiceblue.c b/arch/arm/mach-omap/board-voiceblue.c
index f1a5bff..6b0c500 100644
--- a/arch/arm/mach-omap/board-voiceblue.c
+++ b/arch/arm/mach-omap/board-voiceblue.c
@@ -246,11 +246,13 @@
 EXPORT_SYMBOL(voiceblue_wdt_ping);
 
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
-	MAINTAINER("Ladislav Michl <michl@2n.cz>")
-	BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
-	BOOT_PARAMS(0x10000100)
-	MAPIO(voiceblue_map_io)
-	INITIRQ(voiceblue_init_irq)
-	INIT_MACHINE(voiceblue_init)
-	.timer = &omap_timer,
+	/* Maintainer: Ladislav Michl <michl@2n.cz> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= voiceblue_map_io,
+	.init_irq	= voiceblue_init_irq,
+	.init_machine	= voiceblue_init,
+	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap/usb.c b/arch/arm/mach-omap/usb.c
index 7f37857..fd483ff 100644
--- a/arch/arm/mach-omap/usb.c
+++ b/arch/arm/mach-omap/usb.c
@@ -41,7 +41,6 @@
 
 /* These routines should handle the standard chip-specific modes
  * for usb0/1/2 ports, covering basic mux and transceiver setup.
- * Call omap_usb_init() once, from INIT_MACHINE().
  *
  * Some board-*.c files will need to set up additional mux options,
  * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c4e6d25..efc2f65 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -24,3 +24,7 @@
 
 # Misc features
 obj-$(CONFIG_PM) += pm.o sleep.o
+
+ifeq ($(CONFIG_PXA27x),y)
+obj-$(CONFIG_PM) += standby.o
+endif
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index f691cf7..86b862f 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -287,34 +287,40 @@
 
 #ifdef CONFIG_MACH_CORGI
 MACHINE_START(CORGI, "SHARP Corgi")
-	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
-	FIXUP(fixup_corgi)
-	MAPIO(corgi_map_io)
-	INITIRQ(corgi_init_irq)
-	.init_machine = corgi_init,
-	.timer = &pxa_timer,
+	.phys_ram	= 0xa0000000,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup		= fixup_corgi,
+	.map_io		= corgi_map_io,
+	.init_irq	= corgi_init_irq,
+	.init_machine	= corgi_init,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_SHEPHERD
 MACHINE_START(SHEPHERD, "SHARP Shepherd")
-	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
-	FIXUP(fixup_corgi)
-	MAPIO(corgi_map_io)
-	INITIRQ(corgi_init_irq)
-	.init_machine = corgi_init,
-	.timer = &pxa_timer,
+	.phys_ram	= 0xa0000000,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup		= fixup_corgi,
+	.map_io		= corgi_map_io,
+	.init_irq	= corgi_init_irq,
+	.init_machine	= corgi_init,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_HUSKY
 MACHINE_START(HUSKY, "SHARP Husky")
-	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
-	FIXUP(fixup_corgi)
-	MAPIO(corgi_map_io)
-	INITIRQ(corgi_init_irq)
-	.init_machine = corgi_init,
-	.timer = &pxa_timer,
+	.phys_ram	= 0xa0000000,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup		= fixup_corgi,
+	.map_io		= corgi_map_io,
+	.init_irq	= corgi_init_irq,
+	.init_machine	= corgi_init,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index c5a66bf..386e107 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -181,10 +181,12 @@
 
 
 MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
-	MAINTAINER("Vibren Technologies")
-	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
-	MAPIO(idp_map_io)
-	INITIRQ(idp_init_irq)
+	/* Maintainer: Vibren Technologies */
+	.phys_ram	= 0xa0000000,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= idp_map_io,
+	.init_irq	= idp_init_irq,
 	.timer		= &pxa_timer,
-	INIT_MACHINE(idp_init)
+	.init_machine	= idp_init,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index f2c9e0d..6309853 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -268,10 +268,12 @@
 }
 
 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
-	MAINTAINER("MontaVista Software Inc.")
-	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
-	MAPIO(lubbock_map_io)
-	INITIRQ(lubbock_init_irq)
+	/* Maintainer: MontaVista Software Inc. */
+	.phys_ram	= 0xa0000000,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= lubbock_map_io,
+	.init_irq	= lubbock_init_irq,
 	.timer		= &pxa_timer,
-	INIT_MACHINE(lubbock_init)
+	.init_machine	= lubbock_init,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 9896afc..827b7b5 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -345,10 +345,12 @@
 }
 
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
-	MAINTAINER("MontaVista Software Inc.")
-	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
-	MAPIO(mainstone_map_io)
-	INITIRQ(mainstone_init_irq)
+	/* Maintainer: MontaVista Software Inc. */
+	.phys_ram	= 0xa0000000,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= mainstone_map_io,
+	.init_irq	= mainstone_init_irq,
 	.timer		= &pxa_timer,
-	INIT_MACHINE(mainstone_init)
+	.init_machine	= mainstone_init,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index b6c746e..0e4f6fa 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -180,10 +180,12 @@
 }
 
 MACHINE_START(POODLE, "SHARP Poodle")
-	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
-	FIXUP(fixup_poodle)
-	MAPIO(poodle_map_io)
-	INITIRQ(pxa_init_irq)
-	.timer = &pxa_timer,
-	.init_machine = poodle_init,
+	.phys_ram	= 0xa0000000,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup		= fixup_poodle,
+	.map_io		= poodle_map_io,
+	.init_irq	= pxa_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= poodle_init,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 893964f..9a791b0 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -126,6 +126,7 @@
 {
 	switch (state) {
 	case PM_SUSPEND_MEM:
+	case PM_SUSPEND_STANDBY:
 		return 0;
 	default:
 		return -EINVAL;
@@ -138,7 +139,10 @@
 	extern void pxa_cpu_suspend(unsigned int);
 	extern void pxa_cpu_resume(void);
 
-	CKEN = CKEN22_MEMC | CKEN9_OSTIMER;
+	if (state == PM_SUSPEND_STANDBY)
+		CKEN = CKEN22_MEMC | CKEN9_OSTIMER | CKEN16_LCD |CKEN0_PWM0;
+	else
+		CKEN = CKEN22_MEMC | CKEN9_OSTIMER;
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
 	PCFR &= ~PCFR_FVC;
@@ -147,6 +151,9 @@
 	PEDR = 0xDF12FE1B;
 
 	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		pxa_cpu_standby();
+		break;
 	case PM_SUSPEND_MEM:
 		/* set resume return address */
 		PSPR = virt_to_phys(pxa_cpu_resume);
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
new file mode 100644
index 0000000..8a3f27b
--- /dev/null
+++ b/arch/arm/mach-pxa/standby.S
@@ -0,0 +1,32 @@
+/*
+ * PXA27x standby mode
+ *
+ * Author: David Burrage
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/pxa-regs.h>
+
+		.text
+
+ENTRY(pxa_cpu_standby)
+	ldr	r0, =PSSR
+	mov	r1, #(PSSR_PH | PSSR_STS)
+	mov	r2, #2
+	mov	r3, #UNCACHED_PHYS_0	@ Read mem context in.
+	ldr	ip, [r3]
+	b	1f
+
+	.align	5
+1:	mcr	p14, 0, r2, c7, c0, 0	@ put the system into Standby
+	str	r1, [r0]		@ make sure PSSR_PH/STS are clear
+	mov	pc, lr
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 4371068..a102686 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -163,12 +163,14 @@
 extern struct sys_timer ioc_timer;
 
 MACHINE_START(RISCPC, "Acorn-RiscPC")
-	MAINTAINER("Russell King")
-	BOOT_MEM(0x10000000, 0x03000000, 0xe0000000)
-	BOOT_PARAMS(0x10000100)
-	DISABLE_PARPORT(0)
-	DISABLE_PARPORT(1)
-	MAPIO(rpc_map_io)
-	INITIRQ(rpc_init_irq)
+	/* Maintainer: Russell King */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0x03000000,
+	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.reserve_lp0	= 1,
+	.reserve_lp1	= 1,
+	.map_io		= rpc_map_io,
+	.init_irq	= rpc_init_irq,
 	.timer		= &ioc_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 549bcb1..ccb6bce 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -407,10 +407,11 @@
 
 
 MACHINE_START(BAST, "Simtec-BAST")
-     MAINTAINER("Ben Dooks <ben@simtec.co.uk>")
-     BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
-     BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-
+	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 2924afc..ea4fb1a 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -117,10 +117,12 @@
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")
-     MAINTAINER("Ben Dooks <ben@fluff.org>")
-     BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
-     BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-     MAPIO(h1940_map_io)
-     INITIRQ(h1940_init_irq)
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= h1940_map_io,
+	.init_irq	= h1940_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index bd15998..79044d9 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -137,10 +137,11 @@
 }
 
 MACHINE_START(N30, "Acer-N30")
-     MAINTAINER("Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org>")
-     BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
-     BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-
+	/* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
 	.init_irq	= n30_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c
index 70487bf..d24c242 100644
--- a/arch/arm/mach-s3c2410/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2410/mach-nexcoder.c
@@ -147,9 +147,11 @@
 
 
 MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
-     MAINTAINER("Guillaume GOURAT <guillaume.gourat@nexvision.tv>")
-     BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
-     BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
+	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= nexcoder_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 67d8ce8..d901ed4 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -115,9 +115,11 @@
 
 
 MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
-     MAINTAINER("Guillaume GOURAT <guillaume.gourat@nexvision.tv>")
-     BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
-     BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
+	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= otom11_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c
index f8d3a97..a73d61c 100644
--- a/arch/arm/mach-s3c2410/mach-rx3715.c
+++ b/arch/arm/mach-s3c2410/mach-rx3715.c
@@ -131,11 +131,13 @@
 #endif
 
 MACHINE_START(RX3715, "IPAQ-RX3715")
-     MAINTAINER("Ben Dooks <ben@fluff.org>")
-     BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
-     BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-     MAPIO(rx3715_map_io)
-     INITIRQ(rx3715_init_irq)
-     INIT_MACHINE(rx3715_init_machine)
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= rx3715_map_io,
+	.init_irq	= rx3715_init_irq,
+	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index c1a4a14..67e903a 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -112,11 +112,13 @@
 
 MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
 				    * to SMDK2410 */
-     MAINTAINER("Jonas Dietsche")
-     BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
-     BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-     MAPIO(smdk2410_map_io)
-     INITIRQ(smdk2410_init_irq)
+	/* Maintainer: Jonas Dietsche */
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= smdk2410_map_io,
+	.init_irq	= smdk2410_init_irq,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
 
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index 7857176..3575221 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -124,9 +124,11 @@
 }
 
 MACHINE_START(S3C2440, "SMDK2440")
-	MAINTAINER("Ben Dooks <ben@fluff.org>")
-	BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
-	BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2440_map_io,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 1db2855..924e846 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -373,9 +373,11 @@
 
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
-     MAINTAINER("Ben Dooks <ben@simtec.co.uk>")
-     BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
-     BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
+	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= vr1000_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index bedf88f..4d4d303 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -431,11 +431,13 @@
 
 
 MACHINE_START(ASSABET, "Intel-Assabet")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	BOOT_PARAMS(0xc0000100)
-	FIXUP(fixup_assabet)
-	MAPIO(assabet_map_io)
-	INITIRQ(sa1100_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.fixup		= fixup_assabet,
+	.map_io		= assabet_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= assabet_init,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 6a60b49..b6169cb 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -285,9 +285,11 @@
 }
 
 MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	BOOT_PARAMS(0xc0000100)
-	MAPIO(badge4_map_io)
-	INITIRQ(sa1100_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= badge4_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index f8edde5..0aa918e 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -123,10 +123,12 @@
 }
 
 MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
-	MAINTAINER("support@intrinsyc.com")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	MAPIO(cerf_map_io)
-	INITIRQ(cerf_init_irq)
+	/* Maintainer: support@intrinsyc.com */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.map_io		= cerf_map_io,
+	.init_irq	= cerf_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= cerf_init,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 9928789..8cb6911 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -184,9 +184,11 @@
 }
 
 MACHINE_START(COLLIE, "Sharp-Collie")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	MAPIO(collie_map_io)
-	INITIRQ(sa1100_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.map_io		= collie_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= collie_init,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 8d2a89a..04c94ab 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -271,8 +271,7 @@
 	 */
 	sdram_set_refresh(2);
 	if (!irqs_disabled()) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(20 * HZ / 1000);
+		msleep(20);
 	} else {
 		mdelay(20);
 	}
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 65dbe99..e7aa2681 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -380,10 +380,12 @@
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	BOOT_PARAMS(0xc0000100)
-	MAPIO(h3100_map_io)
-	INITIRQ(sa1100_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= h3100_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3xxx_mach_init,
 MACHINE_END
@@ -496,10 +498,12 @@
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	BOOT_PARAMS(0xc0000100)
-	MAPIO(h3600_map_io)
-	INITIRQ(sa1100_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= h3600_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3xxx_mach_init,
 MACHINE_END
@@ -881,10 +885,12 @@
 }
 
 MACHINE_START(H3800, "Compaq iPAQ H3800")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	BOOT_PARAMS(0xc0000100)
-	MAPIO(h3800_map_io)
-	INITIRQ(h3800_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= h3800_map_io,
+	.init_irq	= h3800_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3xxx_mach_init,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 5708417..502d65c 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -191,10 +191,12 @@
  */
 
 MACHINE_START(HACKKIT, "HackKit Cpu Board")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	BOOT_PARAMS(0xc0000100)
-	MAPIO(hackkit_map_io)
-	INITIRQ(sa1100_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= hackkit_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= hackkit_init,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 6be7829..eee3cbc 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -97,9 +97,11 @@
 }
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	BOOT_PARAMS(0xc0000100)
-	MAPIO(jornada720_map_io)
-	INITIRQ(sa1100_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= jornada720_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 51c08cc..870b488 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -41,9 +41,11 @@
 }
 
 MACHINE_START(LART, "LART")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	BOOT_PARAMS(0xc0000100)
-	MAPIO(lart_map_io)
-	INITIRQ(sa1100_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= lart_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 5606bd7..e17b58f 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -146,9 +146,11 @@
 }
 
 MACHINE_START(PLEB, "PLEB")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	MAPIO(pleb_map_io)
-	INITIRQ(sa1100_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.map_io		= pleb_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine   = pleb_init,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index edddd55..43a0035 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -76,10 +76,12 @@
 }
 
 MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	BOOT_PARAMS(0xc0000100)
-	MAPIO(shannon_map_io)
-	INITIRQ(sa1100_init_irq)
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= shannon_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= shannon_init,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 8d113d6..7797858 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -215,10 +215,12 @@
 
 
 MACHINE_START(SIMPAD, "Simpad")
-	MAINTAINER("Holger Freyther")
-	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-        BOOT_PARAMS(0xc0000100)
-	MAPIO(simpad_map_io)
-	INITIRQ(sa1100_init_irq)
+	/* Maintainer: Holger Freyther */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= simpad_map_io,
+	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index aa0e2f6..7264458 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -105,10 +105,12 @@
 };
 
 MACHINE_START(SHARK, "Shark")
-	MAINTAINER("Alexander Schulz")
-	BOOT_MEM(0x08000000, 0x40000000, 0xe0000000)
-	BOOT_PARAMS(0x08003000)
-	MAPIO(shark_map_io)
-	INITIRQ(shark_init_irq)
+	/* Maintainer: Alexander Schulz */
+	.phys_ram	= 0x08000000,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x08003000,
+	.map_io		= shark_map_io,
+	.init_irq	= shark_init_irq,
 	.timer		= &shark_timer,
 MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index d332084..8b0b3be 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -35,11 +35,13 @@
 #include "core.h"
 
 MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
-	MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
-	BOOT_MEM(0x00000000, 0x101f1000, 0xf11f1000)
-	BOOT_PARAMS(0x00000100)
-	MAPIO(versatile_map_io)
-	INITIRQ(versatile_init_irq)
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_ram	= 0x00000000,
+	.phys_io	= 0x101f1000,
+	.io_pg_offst	= ((0xf11f1000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= versatile_map_io,
+	.init_irq	= versatile_init_irq,
 	.timer		= &versatile_timer,
-	INIT_MACHINE(versatile_init)
+	.init_machine	= versatile_init,
 MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 2702099..7c3078c 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -99,11 +99,13 @@
 arch_initcall(versatile_pb_init);
 
 MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
-	MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
-	BOOT_MEM(0x00000000, 0x101f1000, 0xf11f1000)
-	BOOT_PARAMS(0x00000100)
-	MAPIO(versatile_map_io)
-	INITIRQ(versatile_init_irq)
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_ram	= 0x00000000,
+	.phys_io	= 0x101f1000,
+	.io_pg_offst	= ((0xf11f1000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= versatile_map_io,
+	.init_irq	= versatile_init_irq,
 	.timer		= &versatile_timer,
-	INIT_MACHINE(versatile_init)
+	.init_machine	= versatile_init,
 MACHINE_END
diff --git a/arch/arm/mm/blockops.c b/arch/arm/mm/blockops.c
index 806c6ee..4f5ee2d 100644
--- a/arch/arm/mm/blockops.c
+++ b/arch/arm/mm/blockops.c
@@ -25,13 +25,14 @@
 {
 	asm(
 	"add	r1, r0, %0							\n\
+	sub	r1, r1, %1							\n\
 1:	.word	0xec401f0e	@ mcrr	p15, 0, r0, r1, c14, 0	@ blocking	\n\
 	mov	r0, #0								\n\
 	mcr	p15, 0, r0, c7, c5, 0						\n\
 	mcr	p15, 0, r0, c7, c10, 4						\n\
 	mov	pc, lr"
 	:
-	: "I" (PAGE_SIZE));
+	: "I" (PAGE_SIZE), "I" (L1_CACHE_BYTES));
 }
 
 /*
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 8dbf802..d1f42b9 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -433,7 +433,7 @@
 		printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: no GSI",
 			pci_name(dev), ('A' + pin));
 		/* Interrupt Line values above 0xF are forbidden */
-		if (dev->irq >= 0 && (dev->irq <= 0xF)) {
+		if (dev->irq > 0 && (dev->irq <= 0xF)) {
 			printk(" - using IRQ %d\n", dev->irq);
 			acpi_register_gsi(dev->irq, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
 			return_VALUE(0);
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 5be8ad6d..cca9c07 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -20,7 +20,6 @@
 # Core IDE code - must come before legacy
 ide-core-$(CONFIG_BLK_DEV_IDEPCI)	+= setup-pci.o
 ide-core-$(CONFIG_BLK_DEV_IDEDMA)	+= ide-dma.o
-ide-core-$(CONFIG_BLK_DEV_IDE_TCQ)	+= ide-tcq.o
 ide-core-$(CONFIG_PROC_FS)		+= ide-proc.o
 ide-core-$(CONFIG_BLK_DEV_IDEPNP)	+= ide-pnp.o
 
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 6806d40..b09a653 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -487,8 +487,7 @@
 	u8 err = 0;
 
 	local_irq_set(flags);
-	printk("%s: %s: status=0x%02x", drive->name, msg, stat);
-	printk(" { ");
+	printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
 	if (stat & BUSY_STAT)
 		printk("Busy ");
 	else {
@@ -500,15 +499,13 @@
 		if (stat & INDEX_STAT)	printk("Index ");
 		if (stat & ERR_STAT)	printk("Error ");
 	}
-	printk("}");
-	printk("\n");
+	printk("}\n");
 	if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) {
 		err = hwif->INB(IDE_ERROR_REG);
-		printk("%s: %s: error=0x%02x", drive->name, msg, err);
-		printk(" { ");
+		printk("%s: %s: error=0x%02x { ", drive->name, msg, err);
 		if (err & ABRT_ERR)	printk("DriveStatusError ");
 		if (err & ICRC_ERR)
-			printk("Bad%s ", (err & ABRT_ERR) ? "CRC" : "Sector");
+			printk((err & ABRT_ERR) ? "BadCRC " : "BadSector ");
 		if (err & ECC_ERR)	printk("UncorrectableError ");
 		if (err & ID_ERR)	printk("SectorIdNotFound ");
 		if (err & TRK0_ERR)	printk("TrackZeroNotFound ");
@@ -546,8 +543,8 @@
 				printk(", sector=%llu",
 					(unsigned long long)HWGROUP(drive)->rq->sector);
 		}
+		printk("\n");
 	}
-	printk("\n");
 	ide_dump_opcode(drive);
 	local_irq_restore(flags);
 	return err;
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 67efb38..6cf4939 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -583,7 +583,7 @@
  *	appropriate also sets up the 1533 southbridge.
  */
   
-static unsigned int __init init_chipset_ali15x3 (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const char *name)
 {
 	unsigned long flags;
 	u8 tmpbyte;
@@ -677,7 +677,7 @@
  *	FIXME: frobs bits that are not defined on newer ALi devicea
  */
 
-static unsigned int __init ata66_ali15x3 (ide_hwif_t *hwif)
+static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= hwif->pci_dev;
 	unsigned int ata66	= 0;
@@ -748,7 +748,7 @@
  *	Initialize the IDE structure side of the ALi 15x3 driver.
  */
  
-static void __init init_hwif_common_ali15x3 (ide_hwif_t *hwif)
+static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
 {
 	hwif->autodma = 0;
 	hwif->tuneproc = &ali15x3_tune_drive;
@@ -794,7 +794,7 @@
  *	Sparc systems
  */
 
-static void __init init_hwif_ali15x3 (ide_hwif_t *hwif)
+static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
 {
 	u8 ideic, inmir;
 	s8 irq_routing_table[] = { -1,  9, 3, 10, 4,  5, 7,  6,
@@ -847,7 +847,7 @@
  *	the actual work.
  */
 
-static void __init init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
+static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
 {
 	if (m5229_revision < 0x20)
 		return;
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 4e0f13d..844a6c9 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -73,6 +73,7 @@
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	0x50, AMD_UDMA_133 },
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	0x50, AMD_UDMA_133 },
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	0x50, AMD_UDMA_133 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE,	0x50, AMD_UDMA_133 },
 	{ 0 }
 };
 
@@ -309,7 +310,7 @@
  * and initialize its drive independent registers.
  */
 
-static unsigned int __init init_chipset_amd74xx(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const char *name)
 {
 	unsigned char t;
 	unsigned int u;
@@ -413,7 +414,7 @@
 	return dev->irq;
 }
 
-static void __init init_hwif_amd74xx(ide_hwif_t *hwif)
+static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
 {
 	int i;
 
@@ -489,6 +490,7 @@
 	/* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
 	/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
 	/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
+	/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"),
 };
 
 static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -524,6 +526,7 @@
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 0381961..09269e5 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -217,7 +217,7 @@
  *	Initialize the cs5530 bridge for reliable IDE DMA operation.
  */
 
-static unsigned int __init init_chipset_cs5530 (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const char *name)
 {
 	struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
 	unsigned long flags;
@@ -308,7 +308,7 @@
  *	performs channel-specific pre-initialization before drive probing.
  */
 
-static void __init init_hwif_cs5530 (ide_hwif_t *hwif)
+static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
 {
 	unsigned long basereg;
 	u32 d0_timings;
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 80d67e9..5a33513 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -391,7 +391,7 @@
 /*
  * this function is called during init and is used to setup the cy82c693 chip
  */
-static unsigned int __init init_chipset_cy82c693(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const char *name)
 {
 	if (PCI_FUNC(dev->devfn) != 1)
 		return 0;
@@ -443,7 +443,7 @@
 /*
  * the init function - called for each ide channel once
  */
-static void __init init_hwif_cy82c693(ide_hwif_t *hwif)
+static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif)
 {
 	hwif->autodma = 0;
 
@@ -467,9 +467,9 @@
 	hwif->drives[1].autodma = hwif->autodma;
 }
 
-static __initdata ide_hwif_t *primary;
+static __devinitdata ide_hwif_t *primary;
 
-void __init init_iops_cy82c693(ide_hwif_t *hwif)
+void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
 {
 	if (PCI_FUNC(hwif->pci_dev->devfn) == 1)
 		primary = hwif;
diff --git a/drivers/ide/pci/it8172.c b/drivers/ide/pci/it8172.c
index 631927c..9346292 100644
--- a/drivers/ide/pci/it8172.c
+++ b/drivers/ide/pci/it8172.c
@@ -216,7 +216,7 @@
 	return 0;
 }
 
-static unsigned int __init init_chipset_it8172 (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_it8172 (struct pci_dev *dev, const char *name)
 {
 	unsigned char progif;
     
@@ -230,7 +230,7 @@
 }
 
 
-static void __init init_hwif_it8172 (ide_hwif_t *hwif)
+static void __devinit init_hwif_it8172 (ide_hwif_t *hwif)
 {
 	struct pci_dev* dev = hwif->pci_dev;
 	unsigned long cmdBase, ctrlBase;
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index 205a32f..fcd5142 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -195,7 +195,7 @@
 	return __ide_dma_check(drive);
 }
 
-static void __init init_hwif_ns87415 (ide_hwif_t *hwif)
+static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = hwif->pci_dev;
 	unsigned int ctrl, using_inta;
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index cf4fd91..7a7c2ef 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -326,7 +326,7 @@
 /*
  * init_hwif_opti621() is called once for each hwif found at boot.
  */
-static void __init init_hwif_opti621 (ide_hwif_t *hwif)
+static void __devinit init_hwif_opti621 (ide_hwif_t *hwif)
 {
 	hwif->autodma = 0;
 	hwif->drives[0].drive_data = PIO_DONT_KNOW;
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 3bc3bf1..10592ce 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -459,7 +459,7 @@
  * This gets invoked by the IDE driver once for each channel,
  * and performs channel-specific pre-initialization before drive probing.
  */
-static void __init init_hwif_sc1200 (ide_hwif_t *hwif)
+static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
 {
 	if (hwif->mate)
 		hwif->serialized = hwif->mate->serialized = 1;
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 1d970a0..ea0806c 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -386,7 +386,7 @@
  * channel 0 here at least, but channel 1 has to be enabled by
  * firmware or arch code. We still set both to 16 bits mode.
  */
-static unsigned int __init init_chipset_sl82c105(struct pci_dev *dev, const char *msg)
+static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const char *msg)
 {
 	u32 val;
 
@@ -399,7 +399,7 @@
 	return dev->irq;
 }
 
-static void __init init_dma_sl82c105(ide_hwif_t *hwif, unsigned long dma_base)
+static void __devinit init_dma_sl82c105(ide_hwif_t *hwif, unsigned long dma_base)
 {
 	unsigned int rev;
 	u8 dma_state;
@@ -431,7 +431,7 @@
  * Initialise the chip
  */
 
-static void __init init_hwif_sl82c105(ide_hwif_t *hwif)
+static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = hwif->pci_dev;
 	u32 val;
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 7fbf363..5112c72 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -196,7 +196,7 @@
 }
 #endif /* CONFIG_BLK_DEV_IDEDMA */
 
-static void __init init_hwif_slc90e66 (ide_hwif_t *hwif)
+static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
 {
 	u8 reg47 = 0;
 	u8 mask = hwif->channel ? 0x01 : 0x02;  /* bit0:Primary */
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index a1df2bf..f96b568 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -130,7 +130,7 @@
 	return hwif->ide_dma_off_quietly(drive);
 }
 
-static void __init init_hwif_triflex(ide_hwif_t *hwif)
+static void __devinit init_hwif_triflex(ide_hwif_t *hwif)
 {
 	hwif->tuneproc = &triflex_tune_drive;
 	hwif->speedproc = &triflex_tune_chipset;
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 069dbff..a4d099c 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -415,7 +415,7 @@
  *	and initialize its drive independent registers.
  */
 
-static unsigned int __init init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
 {
 	struct pci_dev *isa = NULL;
 	u8 t, v;
@@ -576,7 +576,7 @@
 	return 0;
 }
 
-static void __init init_hwif_via82cxxx(ide_hwif_t *hwif)
+static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 {
 	int i;
 
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index 3a5f6ac..7a42966 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -20,6 +20,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
 
+#include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/scatterlist.h>
@@ -70,6 +71,7 @@
 static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 {
 	unsigned int datactrl, timeout, irqmask;
+	unsigned long long clks;
 	void __iomem *base;
 
 	DBG(host, "blksz %04x blks %04x flags %08x\n",
@@ -81,9 +83,10 @@
 
 	mmci_init_sg(host, data);
 
-	timeout = data->timeout_clks +
-		  ((unsigned long long)data->timeout_ns * host->cclk) /
-		   1000000000ULL;
+	clks = (unsigned long long)data->timeout_ns * host->cclk;
+	do_div(clks, 1000000000UL);
+
+	timeout = data->timeout_clks + (unsigned int)clks;
 
 	base = host->base;
 	writel(timeout, base + MMCIDATATIMER);
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index b7fbd30..0c41d4b 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -54,28 +54,6 @@
 #define DBGF(x...)	do { } while (0)
 #endif
 
-#ifdef CONFIG_MMC_DEBUG
-void DBG_REG(int reg, u8 value)
-{
-	int i;
-	
-	printk(KERN_DEBUG "wbsd: Register %d: 0x%02X %3d '%c' ",
-		reg, (int)value, (int)value, (value < 0x20)?'.':value);
-	
-	for (i = 7;i >= 0;i--)
-	{
-		if (value & (1 << i))
-			printk("x");
-		else
-			printk(".");
-	}
-	
-	printk("\n");
-}
-#else
-#define DBG_REG(r, v) do {}  while (0)
-#endif
-
 /*
  * Device resources
  */
@@ -92,6 +70,13 @@
 
 #endif /* CONFIG_PNP */
 
+static const int config_ports[] = { 0x2E, 0x4E };
+static const int unlock_codes[] = { 0x83, 0x87 };
+
+static const int valid_ids[] = {
+	0x7112,
+	};
+
 #ifdef CONFIG_PNP
 static unsigned int nopnp = 0;
 #else
@@ -1051,6 +1036,20 @@
 \*****************************************************************************/
 
 /*
+ * Helper function for card detection
+ */
+static void wbsd_detect_card(unsigned long data)
+{
+	struct wbsd_host *host = (struct wbsd_host*)data;
+	
+	BUG_ON(host == NULL);
+	
+	DBG("Executing card detection\n");
+	
+	mmc_detect_change(host->mmc);	
+}
+
+/*
  * Tasklets
  */
 
@@ -1075,7 +1074,6 @@
 {
 	struct wbsd_host* host = (struct wbsd_host*)param;
 	u8 csr;
-	int change = 0;
 	
 	spin_lock(&host->lock);
 	
@@ -1094,14 +1092,20 @@
 		{
 			DBG("Card inserted\n");
 			host->flags |= WBSD_FCARD_PRESENT;
-			change = 1;
+			
+			/*
+			 * Delay card detection to allow electrical connections
+			 * to stabilise.
+			 */
+			mod_timer(&host->timer, jiffies + HZ/2);
 		}
+		
+		spin_unlock(&host->lock);
 	}
 	else if (host->flags & WBSD_FCARD_PRESENT)
 	{
 		DBG("Card removed\n");
 		host->flags &= ~WBSD_FCARD_PRESENT;
-		change = 1;
 		
 		if (host->mrq)
 		{
@@ -1112,15 +1116,14 @@
 			host->mrq->cmd->error = MMC_ERR_FAILED;
 			tasklet_schedule(&host->finish_tasklet);
 		}
-	}
-	
-	/*
-	 * Unlock first since we might get a call back.
-	 */
-	spin_unlock(&host->lock);
+		
+		/*
+		 * Unlock first since we might get a call back.
+		 */
+		spin_unlock(&host->lock);
 
-	if (change)
 		mmc_detect_change(host->mmc);
+	}
 }
 
 static void wbsd_tasklet_fifo(unsigned long param)
@@ -1325,6 +1328,13 @@
 	spin_lock_init(&host->lock);
 	
 	/*
+	 * Set up detection timer
+	 */
+	init_timer(&host->timer);
+	host->timer.data = (unsigned long)host;
+	host->timer.function = wbsd_detect_card;
+	
+	/*
 	 * Maximum number of segments. Worst case is one sector per segment
 	 * so this will be 64kB/512.
 	 */
@@ -1351,11 +1361,17 @@
 static void __devexit wbsd_free_mmc(struct device* dev)
 {
 	struct mmc_host* mmc;
+	struct wbsd_host* host;
 	
 	mmc = dev_get_drvdata(dev);
 	if (!mmc)
 		return;
 	
+	host = mmc_priv(mmc);
+	BUG_ON(host == NULL);
+	
+	del_timer_sync(&host->timer);
+	
 	mmc_free_host(mmc);
 	
 	dev_set_drvdata(dev, NULL);
diff --git a/drivers/mmc/wbsd.h b/drivers/mmc/wbsd.h
index 864f3082..661a9f6 100644
--- a/drivers/mmc/wbsd.h
+++ b/drivers/mmc/wbsd.h
@@ -8,13 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-const int config_ports[] = { 0x2E, 0x4E };
-const int unlock_codes[] = { 0x83, 0x87 };
-
-const int valid_ids[] = {
-	0x7112,
-	};
-
 #define LOCK_CODE		0xAA
 
 #define WBSD_CONF_SWRST		0x02
@@ -187,4 +180,6 @@
 	struct tasklet_struct	timeout_tasklet;
 	struct tasklet_struct	finish_tasklet;
 	struct tasklet_struct	block_tasklet;
+	
+	struct timer_list	timer;		/* Card detection timer */
 };
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 5c46784..7365d4b 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -522,14 +522,11 @@
 static int s3c24xx_serial_startup(struct uart_port *port)
 {
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
-	unsigned long flags;
 	int ret;
 
 	dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
 	    port->mapbase, port->membase);
 
-	local_irq_save(flags);
-
 	rx_enabled(port) = 1;
 
 	ret = request_irq(RX_IRQ(port),
@@ -563,12 +560,10 @@
 	/* the port reset code should have done the correct
 	 * register setup for the port controls */
 
-	local_irq_restore(flags);
 	return ret;
 
  err:
 	s3c24xx_serial_shutdown(port);
-	local_irq_restore(flags);
 	return ret;
 }
 
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 139863a..54699c3 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1808,6 +1808,12 @@
 	struct termios termios;
 	int i;
 
+	/*
+	 * Ensure that the serial console lock is initialised
+	 * early.
+	 */
+	spin_lock_init(&port->lock);
+
 	memset(&termios, 0, sizeof(struct termios));
 
 	termios.c_cflag = CREAD | HUPCL | CLOCAL;
@@ -2196,10 +2202,16 @@
 
 	state->port = port;
 
-	spin_lock_init(&port->lock);
 	port->cons = drv->cons;
 	port->info = state->info;
 
+	/*
+	 * If this port is a console, then the spinlock is already
+	 * initialised.
+	 */
+	if (!uart_console(port))
+		spin_lock_init(&port->lock);
+
 	uart_configure_port(drv, state, port);
 
 	/*
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index b5e54a9e..51f0fe0 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1505,6 +1505,7 @@
 #define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
 #define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
 #define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
+#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
 #define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
 #define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
 #define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
@@ -1965,6 +1966,7 @@
 #define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
 #define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
 
+#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
 #define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
 #define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
 #define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h
index 3a32e92..56c6bf4 100644
--- a/include/asm-arm/mach/arch.h
+++ b/include/asm-arm/mach/arch.h
@@ -26,7 +26,7 @@
 						 * page tabe entry	*/
 
 	const char		*name;		/* architecture name	*/
-	unsigned int		param_offset;	/* parameter page	*/
+	unsigned long		boot_params;	/* tagged list		*/
 
 	unsigned int		video_start;	/* start of video RAM	*/
 	unsigned int		video_end;	/* end of video RAM	*/
@@ -54,38 +54,6 @@
 	.nr		= MACH_TYPE_##_type,	\
 	.name		= _name,
 
-#define MAINTAINER(n)
-
-#define BOOT_MEM(_pram,_pio,_vio)		\
-	.phys_ram	= _pram,		\
-	.phys_io	= _pio,			\
-	.io_pg_offst	= ((_vio)>>18)&0xfffc,
-
-#define BOOT_PARAMS(_params)			\
-	.param_offset	= _params,
-
-#define VIDEO(_start,_end)			\
-	.video_start	= _start,		\
-	.video_end	= _end,
-
-#define DISABLE_PARPORT(_n)			\
-	.reserve_lp##_n	= 1,
-
-#define SOFT_REBOOT				\
-	.soft_reboot	= 1,
-
-#define FIXUP(_func)				\
-	.fixup		= _func,
-
-#define MAPIO(_func)				\
-	.map_io		= _func,
-
-#define INITIRQ(_func)				\
-	.init_irq	= _func,
-
-#define INIT_MACHINE(_func)			\
-	.init_machine	= _func,
-
 #define MACHINE_END				\
 };
 
diff --git a/include/asm-arm/stat.h b/include/asm-arm/stat.h
index ca8e7a8..ec4e2c2 100644
--- a/include/asm-arm/stat.h
+++ b/include/asm-arm/stat.h
@@ -89,6 +89,6 @@
 	unsigned long	st_ctime_nsec;
 
 	unsigned long long	st_ino;
-};
+} __attribute__((packed));
 
 #endif
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c3ee1ae..27348c2 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1238,6 +1238,7 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE	0x0265
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA	0x0266
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2	0x0267
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE	0x036E
 #define PCI_DEVICE_ID_NVIDIA_NVENET_12		0x0268
 #define PCI_DEVICE_ID_NVIDIA_NVENET_13		0x0269
 #define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO	0x026B