ARM: i2c: omap: Remove the i207 errata flag
The commit [i2c: omap: use revision check for OMAP_I2C_FLAG_APPLY_ERRATA_I207]
uses the revision id instead of the flag. So the flag can be safely removed.
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c455e41..b79ccf6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -76,8 +76,7 @@
static struct omap_i2c_dev_attr i2c_dev_attr = {
.fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_BUS_SHIFT_2 |
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f67b7ee..943222c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -791,8 +791,7 @@
/* I2C1 */
static struct omap_i2c_dev_attr i2c1_dev_attr = {
.fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ .flags = OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
@@ -818,8 +817,7 @@
/* I2C2 */
static struct omap_i2c_dev_attr i2c2_dev_attr = {
.fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ .flags = OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
@@ -845,8 +843,7 @@
/* I2C3 */
static struct omap_i2c_dev_attr i2c3_dev_attr = {
.fifo_depth = 64, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ .flags = OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 0ca50e7..11e645a 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1028,8 +1028,7 @@
#ifdef CONFIG_OF
static struct omap_i2c_bus_platform_data omap3_pdata = {
.rev = OMAP_I2C_IP_VERSION_1,
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ .flags = OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index 92a0dc7..1b25c04 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -21,7 +21,6 @@
#define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1)
#define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2)
#define OMAP_I2C_FLAG_RESET_REGS_POSTIDLE BIT(3)
-#define OMAP_I2C_FLAG_APPLY_ERRATA_I207 BIT(4)
#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5)
#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6)
/* how the CPU address bus must be translated for I2C unit access */