| /* |
| * omap_vout.c |
| * |
| * Copyright (C) 2005-2010 Texas Instruments. |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| * |
| * Leveraged code from the OMAP2 camera driver |
| * Video-for-Linux (Version 2) camera capture driver for |
| * the OMAP24xx camera controller. |
| * |
| * Author: Andy Lowe (source@mvista.com) |
| * |
| * Copyright (C) 2004 MontaVista Software, Inc. |
| * Copyright (C) 2010 Texas Instruments. |
| * |
| * History: |
| * 20-APR-2006 Khasim Modified VRFB based Rotation, |
| * The image data is always read from 0 degree |
| * view and written |
| * to the virtual space of desired rotation angle |
| * 4-DEC-2006 Jian Changed to support better memory management |
| * |
| * 17-Nov-2008 Hardik Changed driver to use video_ioctl2 |
| * |
| * 23-Feb-2010 Vaibhav H Modified to use new DSS2 interface |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/vmalloc.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/platform_device.h> |
| #include <linux/irq.h> |
| #include <linux/videodev2.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/slab.h> |
| |
| #include <media/videobuf-dma-contig.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| |
| #include <video/omapvrfb.h> |
| #include <video/omapfb_dss.h> |
| |
| #include "omap_voutlib.h" |
| #include "omap_voutdef.h" |
| #include "omap_vout_vrfb.h" |
| |
| MODULE_AUTHOR("Texas Instruments"); |
| MODULE_DESCRIPTION("OMAP Video for Linux Video out driver"); |
| MODULE_LICENSE("GPL"); |
| |
| /* Driver Configuration macros */ |
| #define VOUT_NAME "omap_vout" |
| |
| enum omap_vout_channels { |
| OMAP_VIDEO1, |
| OMAP_VIDEO2, |
| }; |
| |
| static struct videobuf_queue_ops video_vbq_ops; |
| /* Variables configurable through module params*/ |
| static u32 video1_numbuffers = 3; |
| static u32 video2_numbuffers = 3; |
| static u32 video1_bufsize = OMAP_VOUT_MAX_BUF_SIZE; |
| static u32 video2_bufsize = OMAP_VOUT_MAX_BUF_SIZE; |
| static bool vid1_static_vrfb_alloc; |
| static bool vid2_static_vrfb_alloc; |
| static bool debug; |
| |
| /* Module parameters */ |
| module_param(video1_numbuffers, uint, S_IRUGO); |
| MODULE_PARM_DESC(video1_numbuffers, |
| "Number of buffers to be allocated at init time for Video1 device."); |
| |
| module_param(video2_numbuffers, uint, S_IRUGO); |
| MODULE_PARM_DESC(video2_numbuffers, |
| "Number of buffers to be allocated at init time for Video2 device."); |
| |
| module_param(video1_bufsize, uint, S_IRUGO); |
| MODULE_PARM_DESC(video1_bufsize, |
| "Size of the buffer to be allocated for video1 device"); |
| |
| module_param(video2_bufsize, uint, S_IRUGO); |
| MODULE_PARM_DESC(video2_bufsize, |
| "Size of the buffer to be allocated for video2 device"); |
| |
| module_param(vid1_static_vrfb_alloc, bool, S_IRUGO); |
| MODULE_PARM_DESC(vid1_static_vrfb_alloc, |
| "Static allocation of the VRFB buffer for video1 device"); |
| |
| module_param(vid2_static_vrfb_alloc, bool, S_IRUGO); |
| MODULE_PARM_DESC(vid2_static_vrfb_alloc, |
| "Static allocation of the VRFB buffer for video2 device"); |
| |
| module_param(debug, bool, S_IRUGO); |
| MODULE_PARM_DESC(debug, "Debug level (0-1)"); |
| |
| /* list of image formats supported by OMAP2 video pipelines */ |
| static const struct v4l2_fmtdesc omap_formats[] = { |
| { |
| /* Note: V4L2 defines RGB565 as: |
| * |
| * Byte 0 Byte 1 |
| * g2 g1 g0 r4 r3 r2 r1 r0 b4 b3 b2 b1 b0 g5 g4 g3 |
| * |
| * We interpret RGB565 as: |
| * |
| * Byte 0 Byte 1 |
| * g2 g1 g0 b4 b3 b2 b1 b0 r4 r3 r2 r1 r0 g5 g4 g3 |
| */ |
| .description = "RGB565, le", |
| .pixelformat = V4L2_PIX_FMT_RGB565, |
| }, |
| { |
| /* Note: V4L2 defines RGB32 as: RGB-8-8-8-8 we use |
| * this for RGB24 unpack mode, the last 8 bits are ignored |
| * */ |
| .description = "RGB32, le", |
| .pixelformat = V4L2_PIX_FMT_RGB32, |
| }, |
| { |
| /* Note: V4L2 defines RGB24 as: RGB-8-8-8 we use |
| * this for RGB24 packed mode |
| * |
| */ |
| .description = "RGB24, le", |
| .pixelformat = V4L2_PIX_FMT_RGB24, |
| }, |
| { |
| .description = "YUYV (YUV 4:2:2), packed", |
| .pixelformat = V4L2_PIX_FMT_YUYV, |
| }, |
| { |
| .description = "UYVY, packed", |
| .pixelformat = V4L2_PIX_FMT_UYVY, |
| }, |
| }; |
| |
| #define NUM_OUTPUT_FORMATS (ARRAY_SIZE(omap_formats)) |
| |
| /* |
| * Try format |
| */ |
| static int omap_vout_try_format(struct v4l2_pix_format *pix) |
| { |
| int ifmt, bpp = 0; |
| |
| pix->height = clamp(pix->height, (u32)VID_MIN_HEIGHT, |
| (u32)VID_MAX_HEIGHT); |
| pix->width = clamp(pix->width, (u32)VID_MIN_WIDTH, (u32)VID_MAX_WIDTH); |
| |
| for (ifmt = 0; ifmt < NUM_OUTPUT_FORMATS; ifmt++) { |
| if (pix->pixelformat == omap_formats[ifmt].pixelformat) |
| break; |
| } |
| |
| if (ifmt == NUM_OUTPUT_FORMATS) |
| ifmt = 0; |
| |
| pix->pixelformat = omap_formats[ifmt].pixelformat; |
| pix->field = V4L2_FIELD_ANY; |
| |
| switch (pix->pixelformat) { |
| case V4L2_PIX_FMT_YUYV: |
| case V4L2_PIX_FMT_UYVY: |
| default: |
| pix->colorspace = V4L2_COLORSPACE_JPEG; |
| bpp = YUYV_BPP; |
| break; |
| case V4L2_PIX_FMT_RGB565: |
| case V4L2_PIX_FMT_RGB565X: |
| pix->colorspace = V4L2_COLORSPACE_SRGB; |
| bpp = RGB565_BPP; |
| break; |
| case V4L2_PIX_FMT_RGB24: |
| pix->colorspace = V4L2_COLORSPACE_SRGB; |
| bpp = RGB24_BPP; |
| break; |
| case V4L2_PIX_FMT_RGB32: |
| case V4L2_PIX_FMT_BGR32: |
| pix->colorspace = V4L2_COLORSPACE_SRGB; |
| bpp = RGB32_BPP; |
| break; |
| } |
| pix->bytesperline = pix->width * bpp; |
| pix->sizeimage = pix->bytesperline * pix->height; |
| |
| return bpp; |
| } |
| |
| /* |
| * omap_vout_get_userptr: Convert user space virtual address to physical |
| * address. |
| */ |
| static int omap_vout_get_userptr(struct videobuf_buffer *vb, long virtp, |
| u32 *physp) |
| { |
| struct frame_vector *vec; |
| int ret; |
| |
| /* For kernel direct-mapped memory, take the easy way */ |
| if (virtp >= PAGE_OFFSET) { |
| *physp = virt_to_phys((void *)virtp); |
| return 0; |
| } |
| |
| vec = frame_vector_create(1); |
| if (!vec) |
| return -ENOMEM; |
| |
| ret = get_vaddr_frames(virtp, 1, FOLL_WRITE, vec); |
| if (ret != 1) { |
| frame_vector_destroy(vec); |
| return -EINVAL; |
| } |
| *physp = __pfn_to_phys(frame_vector_pfns(vec)[0]); |
| vb->priv = vec; |
| |
| return 0; |
| } |
| |
| /* |
| * Free the V4L2 buffers |
| */ |
| void omap_vout_free_buffers(struct omap_vout_device *vout) |
| { |
| int i, numbuffers; |
| |
| /* Allocate memory for the buffers */ |
| numbuffers = (vout->vid) ? video2_numbuffers : video1_numbuffers; |
| vout->buffer_size = (vout->vid) ? video2_bufsize : video1_bufsize; |
| |
| for (i = 0; i < numbuffers; i++) { |
| omap_vout_free_buffer(vout->buf_virt_addr[i], |
| vout->buffer_size); |
| vout->buf_phy_addr[i] = 0; |
| vout->buf_virt_addr[i] = 0; |
| } |
| } |
| |
| /* |
| * Convert V4L2 rotation to DSS rotation |
| * V4L2 understand 0, 90, 180, 270. |
| * Convert to 0, 1, 2 and 3 respectively for DSS |
| */ |
| static int v4l2_rot_to_dss_rot(int v4l2_rotation, |
| enum dss_rotation *rotation, bool mirror) |
| { |
| int ret = 0; |
| |
| switch (v4l2_rotation) { |
| case 90: |
| *rotation = dss_rotation_90_degree; |
| break; |
| case 180: |
| *rotation = dss_rotation_180_degree; |
| break; |
| case 270: |
| *rotation = dss_rotation_270_degree; |
| break; |
| case 0: |
| *rotation = dss_rotation_0_degree; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| return ret; |
| } |
| |
| static int omap_vout_calculate_offset(struct omap_vout_device *vout) |
| { |
| struct omapvideo_info *ovid; |
| struct v4l2_rect *crop = &vout->crop; |
| struct v4l2_pix_format *pix = &vout->pix; |
| int *cropped_offset = &vout->cropped_offset; |
| int ps = 2, line_length = 0; |
| |
| ovid = &vout->vid_info; |
| |
| if (ovid->rotation_type == VOUT_ROT_VRFB) { |
| omap_vout_calculate_vrfb_offset(vout); |
| } else { |
| vout->line_length = line_length = pix->width; |
| |
| if (V4L2_PIX_FMT_YUYV == pix->pixelformat || |
| V4L2_PIX_FMT_UYVY == pix->pixelformat) |
| ps = 2; |
| else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) |
| ps = 4; |
| else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) |
| ps = 3; |
| |
| vout->ps = ps; |
| |
| *cropped_offset = (line_length * ps) * |
| crop->top + crop->left * ps; |
| } |
| |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "%s Offset:%x\n", |
| __func__, vout->cropped_offset); |
| |
| return 0; |
| } |
| |
| /* |
| * Convert V4L2 pixel format to DSS pixel format |
| */ |
| static int video_mode_to_dss_mode(struct omap_vout_device *vout) |
| { |
| struct omap_overlay *ovl; |
| struct omapvideo_info *ovid; |
| struct v4l2_pix_format *pix = &vout->pix; |
| enum omap_color_mode mode; |
| |
| ovid = &vout->vid_info; |
| ovl = ovid->overlays[0]; |
| |
| switch (pix->pixelformat) { |
| case V4L2_PIX_FMT_YUYV: |
| mode = OMAP_DSS_COLOR_YUV2; |
| break; |
| case V4L2_PIX_FMT_UYVY: |
| mode = OMAP_DSS_COLOR_UYVY; |
| break; |
| case V4L2_PIX_FMT_RGB565: |
| mode = OMAP_DSS_COLOR_RGB16; |
| break; |
| case V4L2_PIX_FMT_RGB24: |
| mode = OMAP_DSS_COLOR_RGB24P; |
| break; |
| case V4L2_PIX_FMT_RGB32: |
| mode = (ovl->id == OMAP_DSS_VIDEO1) ? |
| OMAP_DSS_COLOR_RGB24U : OMAP_DSS_COLOR_ARGB32; |
| break; |
| case V4L2_PIX_FMT_BGR32: |
| mode = OMAP_DSS_COLOR_RGBX32; |
| break; |
| default: |
| mode = -EINVAL; |
| break; |
| } |
| return mode; |
| } |
| |
| /* |
| * Setup the overlay |
| */ |
| static int omapvid_setup_overlay(struct omap_vout_device *vout, |
| struct omap_overlay *ovl, int posx, int posy, int outw, |
| int outh, u32 addr) |
| { |
| int ret = 0; |
| struct omap_overlay_info info; |
| int cropheight, cropwidth, pixwidth; |
| |
| if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 && |
| (outw != vout->pix.width || outh != vout->pix.height)) { |
| ret = -EINVAL; |
| goto setup_ovl_err; |
| } |
| |
| vout->dss_mode = video_mode_to_dss_mode(vout); |
| if (vout->dss_mode == -EINVAL) { |
| ret = -EINVAL; |
| goto setup_ovl_err; |
| } |
| |
| /* Setup the input plane parameters according to |
| * rotation value selected. |
| */ |
| if (is_rotation_90_or_270(vout)) { |
| cropheight = vout->crop.width; |
| cropwidth = vout->crop.height; |
| pixwidth = vout->pix.height; |
| } else { |
| cropheight = vout->crop.height; |
| cropwidth = vout->crop.width; |
| pixwidth = vout->pix.width; |
| } |
| |
| ovl->get_overlay_info(ovl, &info); |
| info.paddr = addr; |
| info.width = cropwidth; |
| info.height = cropheight; |
| info.color_mode = vout->dss_mode; |
| info.mirror = vout->mirror; |
| info.pos_x = posx; |
| info.pos_y = posy; |
| info.out_width = outw; |
| info.out_height = outh; |
| info.global_alpha = vout->win.global_alpha; |
| if (!is_rotation_enabled(vout)) { |
| info.rotation = 0; |
| info.rotation_type = OMAP_DSS_ROT_DMA; |
| info.screen_width = pixwidth; |
| } else { |
| info.rotation = vout->rotation; |
| info.rotation_type = OMAP_DSS_ROT_VRFB; |
| info.screen_width = 2048; |
| } |
| |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, |
| "%s enable=%d addr=%pad width=%d\n height=%d color_mode=%d\n" |
| "rotation=%d mirror=%d posx=%d posy=%d out_width = %d \n" |
| "out_height=%d rotation_type=%d screen_width=%d\n", __func__, |
| ovl->is_enabled(ovl), &info.paddr, info.width, info.height, |
| info.color_mode, info.rotation, info.mirror, info.pos_x, |
| info.pos_y, info.out_width, info.out_height, info.rotation_type, |
| info.screen_width); |
| |
| ret = ovl->set_overlay_info(ovl, &info); |
| if (ret) |
| goto setup_ovl_err; |
| |
| return 0; |
| |
| setup_ovl_err: |
| v4l2_warn(&vout->vid_dev->v4l2_dev, "setup_overlay failed\n"); |
| return ret; |
| } |
| |
| /* |
| * Initialize the overlay structure |
| */ |
| static int omapvid_init(struct omap_vout_device *vout, u32 addr) |
| { |
| int ret = 0, i; |
| struct v4l2_window *win; |
| struct omap_overlay *ovl; |
| int posx, posy, outw, outh; |
| struct omap_video_timings *timing; |
| struct omapvideo_info *ovid = &vout->vid_info; |
| |
| win = &vout->win; |
| for (i = 0; i < ovid->num_overlays; i++) { |
| struct omap_dss_device *dssdev; |
| |
| ovl = ovid->overlays[i]; |
| dssdev = ovl->get_device(ovl); |
| |
| if (!dssdev) |
| return -EINVAL; |
| |
| timing = &dssdev->panel.timings; |
| |
| outw = win->w.width; |
| outh = win->w.height; |
| switch (vout->rotation) { |
| case dss_rotation_90_degree: |
| /* Invert the height and width for 90 |
| * and 270 degree rotation |
| */ |
| swap(outw, outh); |
| posy = (timing->y_res - win->w.width) - win->w.left; |
| posx = win->w.top; |
| break; |
| |
| case dss_rotation_180_degree: |
| posx = (timing->x_res - win->w.width) - win->w.left; |
| posy = (timing->y_res - win->w.height) - win->w.top; |
| break; |
| |
| case dss_rotation_270_degree: |
| swap(outw, outh); |
| posy = win->w.left; |
| posx = (timing->x_res - win->w.height) - win->w.top; |
| break; |
| |
| default: |
| posx = win->w.left; |
| posy = win->w.top; |
| break; |
| } |
| |
| ret = omapvid_setup_overlay(vout, ovl, posx, posy, |
| outw, outh, addr); |
| if (ret) |
| goto omapvid_init_err; |
| } |
| return 0; |
| |
| omapvid_init_err: |
| v4l2_warn(&vout->vid_dev->v4l2_dev, "apply_changes failed\n"); |
| return ret; |
| } |
| |
| /* |
| * Apply the changes set the go bit of DSS |
| */ |
| static int omapvid_apply_changes(struct omap_vout_device *vout) |
| { |
| int i; |
| struct omap_overlay *ovl; |
| struct omapvideo_info *ovid = &vout->vid_info; |
| |
| for (i = 0; i < ovid->num_overlays; i++) { |
| struct omap_dss_device *dssdev; |
| |
| ovl = ovid->overlays[i]; |
| dssdev = ovl->get_device(ovl); |
| if (!dssdev) |
| return -EINVAL; |
| ovl->manager->apply(ovl->manager); |
| } |
| |
| return 0; |
| } |
| |
| static int omapvid_handle_interlace_display(struct omap_vout_device *vout, |
| unsigned int irqstatus, struct timeval timevalue) |
| { |
| u32 fid; |
| |
| if (vout->first_int) { |
| vout->first_int = 0; |
| goto err; |
| } |
| |
| if (irqstatus & DISPC_IRQ_EVSYNC_ODD) |
| fid = 1; |
| else if (irqstatus & DISPC_IRQ_EVSYNC_EVEN) |
| fid = 0; |
| else |
| goto err; |
| |
| vout->field_id ^= 1; |
| if (fid != vout->field_id) { |
| if (fid == 0) |
| vout->field_id = fid; |
| } else if (0 == fid) { |
| if (vout->cur_frm == vout->next_frm) |
| goto err; |
| |
| vout->cur_frm->ts = timevalue; |
| vout->cur_frm->state = VIDEOBUF_DONE; |
| wake_up_interruptible(&vout->cur_frm->done); |
| vout->cur_frm = vout->next_frm; |
| } else { |
| if (list_empty(&vout->dma_queue) || |
| (vout->cur_frm != vout->next_frm)) |
| goto err; |
| } |
| |
| return vout->field_id; |
| err: |
| return 0; |
| } |
| |
| static void omap_vout_isr(void *arg, unsigned int irqstatus) |
| { |
| int ret, fid, mgr_id; |
| u32 addr, irq; |
| struct omap_overlay *ovl; |
| struct timeval timevalue; |
| struct omapvideo_info *ovid; |
| struct omap_dss_device *cur_display; |
| struct omap_vout_device *vout = (struct omap_vout_device *)arg; |
| |
| if (!vout->streaming) |
| return; |
| |
| ovid = &vout->vid_info; |
| ovl = ovid->overlays[0]; |
| |
| mgr_id = ovl->manager->id; |
| |
| /* get the display device attached to the overlay */ |
| cur_display = ovl->get_device(ovl); |
| |
| if (!cur_display) |
| return; |
| |
| spin_lock(&vout->vbq_lock); |
| v4l2_get_timestamp(&timevalue); |
| |
| switch (cur_display->type) { |
| case OMAP_DISPLAY_TYPE_DSI: |
| case OMAP_DISPLAY_TYPE_DPI: |
| case OMAP_DISPLAY_TYPE_DVI: |
| if (mgr_id == OMAP_DSS_CHANNEL_LCD) |
| irq = DISPC_IRQ_VSYNC; |
| else if (mgr_id == OMAP_DSS_CHANNEL_LCD2) |
| irq = DISPC_IRQ_VSYNC2; |
| else |
| goto vout_isr_err; |
| |
| if (!(irqstatus & irq)) |
| goto vout_isr_err; |
| break; |
| case OMAP_DISPLAY_TYPE_VENC: |
| fid = omapvid_handle_interlace_display(vout, irqstatus, |
| timevalue); |
| if (!fid) |
| goto vout_isr_err; |
| break; |
| case OMAP_DISPLAY_TYPE_HDMI: |
| if (!(irqstatus & DISPC_IRQ_EVSYNC_EVEN)) |
| goto vout_isr_err; |
| break; |
| default: |
| goto vout_isr_err; |
| } |
| |
| if (!vout->first_int && (vout->cur_frm != vout->next_frm)) { |
| vout->cur_frm->ts = timevalue; |
| vout->cur_frm->state = VIDEOBUF_DONE; |
| wake_up_interruptible(&vout->cur_frm->done); |
| vout->cur_frm = vout->next_frm; |
| } |
| |
| vout->first_int = 0; |
| if (list_empty(&vout->dma_queue)) |
| goto vout_isr_err; |
| |
| vout->next_frm = list_entry(vout->dma_queue.next, |
| struct videobuf_buffer, queue); |
| list_del(&vout->next_frm->queue); |
| |
| vout->next_frm->state = VIDEOBUF_ACTIVE; |
| |
| addr = (unsigned long) vout->queued_buf_addr[vout->next_frm->i] |
| + vout->cropped_offset; |
| |
| /* First save the configuration in ovelray structure */ |
| ret = omapvid_init(vout, addr); |
| if (ret) { |
| printk(KERN_ERR VOUT_NAME |
| "failed to set overlay info\n"); |
| goto vout_isr_err; |
| } |
| |
| /* Enable the pipeline and set the Go bit */ |
| ret = omapvid_apply_changes(vout); |
| if (ret) |
| printk(KERN_ERR VOUT_NAME "failed to change mode\n"); |
| |
| vout_isr_err: |
| spin_unlock(&vout->vbq_lock); |
| } |
| |
| /* Video buffer call backs */ |
| |
| /* |
| * Buffer setup function is called by videobuf layer when REQBUF ioctl is |
| * called. This is used to setup buffers and return size and count of |
| * buffers allocated. After the call to this buffer, videobuf layer will |
| * setup buffer queue depending on the size and count of buffers |
| */ |
| static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count, |
| unsigned int *size) |
| { |
| int startindex = 0, i, j; |
| u32 phy_addr = 0, virt_addr = 0; |
| struct omap_vout_device *vout = q->priv_data; |
| struct omapvideo_info *ovid = &vout->vid_info; |
| int vid_max_buf_size; |
| |
| if (!vout) |
| return -EINVAL; |
| |
| vid_max_buf_size = vout->vid == OMAP_VIDEO1 ? video1_bufsize : |
| video2_bufsize; |
| |
| if (V4L2_BUF_TYPE_VIDEO_OUTPUT != q->type) |
| return -EINVAL; |
| |
| startindex = (vout->vid == OMAP_VIDEO1) ? |
| video1_numbuffers : video2_numbuffers; |
| if (V4L2_MEMORY_MMAP == vout->memory && *count < startindex) |
| *count = startindex; |
| |
| if (ovid->rotation_type == VOUT_ROT_VRFB) { |
| if (omap_vout_vrfb_buffer_setup(vout, count, startindex)) |
| return -ENOMEM; |
| } |
| |
| if (V4L2_MEMORY_MMAP != vout->memory) |
| return 0; |
| |
| /* Now allocated the V4L2 buffers */ |
| *size = PAGE_ALIGN(vout->pix.width * vout->pix.height * vout->bpp); |
| startindex = (vout->vid == OMAP_VIDEO1) ? |
| video1_numbuffers : video2_numbuffers; |
| |
| /* Check the size of the buffer */ |
| if (*size > vid_max_buf_size) { |
| v4l2_err(&vout->vid_dev->v4l2_dev, |
| "buffer allocation mismatch [%u] [%u]\n", |
| *size, vout->buffer_size); |
| return -ENOMEM; |
| } |
| |
| for (i = startindex; i < *count; i++) { |
| vout->buffer_size = *size; |
| |
| virt_addr = omap_vout_alloc_buffer(vout->buffer_size, |
| &phy_addr); |
| if (!virt_addr) { |
| if (ovid->rotation_type == VOUT_ROT_NONE) |
| break; |
| |
| if (!is_rotation_enabled(vout)) |
| break; |
| |
| /* Free the VRFB buffers if no space for V4L2 buffers */ |
| for (j = i; j < *count; j++) { |
| omap_vout_free_buffer(vout->smsshado_virt_addr[j], |
| vout->smsshado_size); |
| vout->smsshado_virt_addr[j] = 0; |
| vout->smsshado_phy_addr[j] = 0; |
| } |
| } |
| vout->buf_virt_addr[i] = virt_addr; |
| vout->buf_phy_addr[i] = phy_addr; |
| } |
| *count = vout->buffer_allocated = i; |
| |
| return 0; |
| } |
| |
| /* |
| * Free the V4L2 buffers additionally allocated than default |
| * number of buffers |
| */ |
| static void omap_vout_free_extra_buffers(struct omap_vout_device *vout) |
| { |
| int num_buffers = 0, i; |
| |
| num_buffers = (vout->vid == OMAP_VIDEO1) ? |
| video1_numbuffers : video2_numbuffers; |
| |
| for (i = num_buffers; i < vout->buffer_allocated; i++) { |
| if (vout->buf_virt_addr[i]) |
| omap_vout_free_buffer(vout->buf_virt_addr[i], |
| vout->buffer_size); |
| |
| vout->buf_virt_addr[i] = 0; |
| vout->buf_phy_addr[i] = 0; |
| } |
| vout->buffer_allocated = num_buffers; |
| } |
| |
| /* |
| * This function will be called when VIDIOC_QBUF ioctl is called. |
| * It prepare buffers before give out for the display. This function |
| * converts user space virtual address into physical address if userptr memory |
| * exchange mechanism is used. If rotation is enabled, it copies entire |
| * buffer into VRFB memory space before giving it to the DSS. |
| */ |
| static int omap_vout_buffer_prepare(struct videobuf_queue *q, |
| struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct omap_vout_device *vout = q->priv_data; |
| struct omapvideo_info *ovid = &vout->vid_info; |
| |
| if (VIDEOBUF_NEEDS_INIT == vb->state) { |
| vb->width = vout->pix.width; |
| vb->height = vout->pix.height; |
| vb->size = vb->width * vb->height * vout->bpp; |
| vb->field = field; |
| } |
| vb->state = VIDEOBUF_PREPARED; |
| /* if user pointer memory mechanism is used, get the physical |
| * address of the buffer |
| */ |
| if (V4L2_MEMORY_USERPTR == vb->memory) { |
| int ret; |
| |
| if (0 == vb->baddr) |
| return -EINVAL; |
| /* Physical address */ |
| ret = omap_vout_get_userptr(vb, vb->baddr, |
| (u32 *)&vout->queued_buf_addr[vb->i]); |
| if (ret < 0) |
| return ret; |
| } else { |
| unsigned long addr, dma_addr; |
| unsigned long size; |
| |
| addr = (unsigned long) vout->buf_virt_addr[vb->i]; |
| size = (unsigned long) vb->size; |
| |
| dma_addr = dma_map_single(vout->vid_dev->v4l2_dev.dev, (void *) addr, |
| size, DMA_TO_DEVICE); |
| if (dma_mapping_error(vout->vid_dev->v4l2_dev.dev, dma_addr)) |
| v4l2_err(&vout->vid_dev->v4l2_dev, |
| "dma_map_single failed\n"); |
| |
| vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i]; |
| } |
| |
| if (ovid->rotation_type == VOUT_ROT_VRFB) |
| return omap_vout_prepare_vrfb(vout, vb); |
| else |
| return 0; |
| } |
| |
| /* |
| * Buffer queue function will be called from the videobuf layer when _QBUF |
| * ioctl is called. It is used to enqueue buffer, which is ready to be |
| * displayed. |
| */ |
| static void omap_vout_buffer_queue(struct videobuf_queue *q, |
| struct videobuf_buffer *vb) |
| { |
| struct omap_vout_device *vout = q->priv_data; |
| |
| /* Driver is also maintainig a queue. So enqueue buffer in the driver |
| * queue */ |
| list_add_tail(&vb->queue, &vout->dma_queue); |
| |
| vb->state = VIDEOBUF_QUEUED; |
| } |
| |
| /* |
| * Buffer release function is called from videobuf layer to release buffer |
| * which are already allocated |
| */ |
| static void omap_vout_buffer_release(struct videobuf_queue *q, |
| struct videobuf_buffer *vb) |
| { |
| vb->state = VIDEOBUF_NEEDS_INIT; |
| if (vb->memory == V4L2_MEMORY_USERPTR && vb->priv) { |
| struct frame_vector *vec = vb->priv; |
| |
| put_vaddr_frames(vec); |
| frame_vector_destroy(vec); |
| } |
| } |
| |
| /* |
| * File operations |
| */ |
| static __poll_t omap_vout_poll(struct file *file, |
| struct poll_table_struct *wait) |
| { |
| struct omap_vout_device *vout = file->private_data; |
| struct videobuf_queue *q = &vout->vbq; |
| |
| return videobuf_poll_stream(file, q, wait); |
| } |
| |
| static void omap_vout_vm_open(struct vm_area_struct *vma) |
| { |
| struct omap_vout_device *vout = vma->vm_private_data; |
| |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, |
| "vm_open [vma=%08lx-%08lx]\n", vma->vm_start, vma->vm_end); |
| vout->mmap_count++; |
| } |
| |
| static void omap_vout_vm_close(struct vm_area_struct *vma) |
| { |
| struct omap_vout_device *vout = vma->vm_private_data; |
| |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, |
| "vm_close [vma=%08lx-%08lx]\n", vma->vm_start, vma->vm_end); |
| vout->mmap_count--; |
| } |
| |
| static const struct vm_operations_struct omap_vout_vm_ops = { |
| .open = omap_vout_vm_open, |
| .close = omap_vout_vm_close, |
| }; |
| |
| static int omap_vout_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| int i; |
| void *pos; |
| unsigned long start = vma->vm_start; |
| unsigned long size = (vma->vm_end - vma->vm_start); |
| struct omap_vout_device *vout = file->private_data; |
| struct videobuf_queue *q = &vout->vbq; |
| |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, |
| " %s pgoff=0x%lx, start=0x%lx, end=0x%lx\n", __func__, |
| vma->vm_pgoff, vma->vm_start, vma->vm_end); |
| |
| /* look for the buffer to map */ |
| for (i = 0; i < VIDEO_MAX_FRAME; i++) { |
| if (NULL == q->bufs[i]) |
| continue; |
| if (V4L2_MEMORY_MMAP != q->bufs[i]->memory) |
| continue; |
| if (q->bufs[i]->boff == (vma->vm_pgoff << PAGE_SHIFT)) |
| break; |
| } |
| |
| if (VIDEO_MAX_FRAME == i) { |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, |
| "offset invalid [offset=0x%lx]\n", |
| (vma->vm_pgoff << PAGE_SHIFT)); |
| return -EINVAL; |
| } |
| /* Check the size of the buffer */ |
| if (size > vout->buffer_size) { |
| v4l2_err(&vout->vid_dev->v4l2_dev, |
| "insufficient memory [%lu] [%u]\n", |
| size, vout->buffer_size); |
| return -ENOMEM; |
| } |
| |
| q->bufs[i]->baddr = vma->vm_start; |
| |
| vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; |
| vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); |
| vma->vm_ops = &omap_vout_vm_ops; |
| vma->vm_private_data = (void *) vout; |
| pos = (void *)vout->buf_virt_addr[i]; |
| vma->vm_pgoff = virt_to_phys((void *)pos) >> PAGE_SHIFT; |
| while (size > 0) { |
| unsigned long pfn; |
| pfn = virt_to_phys((void *) pos) >> PAGE_SHIFT; |
| if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED)) |
| return -EAGAIN; |
| start += PAGE_SIZE; |
| pos += PAGE_SIZE; |
| size -= PAGE_SIZE; |
| } |
| vout->mmap_count++; |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Exiting %s\n", __func__); |
| |
| return 0; |
| } |
| |
| static int omap_vout_release(struct file *file) |
| { |
| unsigned int ret, i; |
| struct videobuf_queue *q; |
| struct omapvideo_info *ovid; |
| struct omap_vout_device *vout = file->private_data; |
| |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Entering %s\n", __func__); |
| ovid = &vout->vid_info; |
| |
| if (!vout) |
| return 0; |
| |
| q = &vout->vbq; |
| /* Disable all the overlay managers connected with this interface */ |
| for (i = 0; i < ovid->num_overlays; i++) { |
| struct omap_overlay *ovl = ovid->overlays[i]; |
| struct omap_dss_device *dssdev = ovl->get_device(ovl); |
| |
| if (dssdev) |
| ovl->disable(ovl); |
| } |
| /* Turn off the pipeline */ |
| ret = omapvid_apply_changes(vout); |
| if (ret) |
| v4l2_warn(&vout->vid_dev->v4l2_dev, |
| "Unable to apply changes\n"); |
| |
| /* Free all buffers */ |
| omap_vout_free_extra_buffers(vout); |
| |
| /* Free the VRFB buffers only if they are allocated |
| * during reqbufs. Don't free if init time allocated |
| */ |
| if (ovid->rotation_type == VOUT_ROT_VRFB) { |
| if (!vout->vrfb_static_allocation) |
| omap_vout_free_vrfb_buffers(vout); |
| } |
| videobuf_mmap_free(q); |
| |
| /* Even if apply changes fails we should continue |
| freeing allocated memory */ |
| if (vout->streaming) { |
| u32 mask = 0; |
| |
| mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | |
| DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_VSYNC2; |
| omap_dispc_unregister_isr(omap_vout_isr, vout, mask); |
| vout->streaming = false; |
| |
| videobuf_streamoff(q); |
| videobuf_queue_cancel(q); |
| } |
| |
| if (vout->mmap_count != 0) |
| vout->mmap_count = 0; |
| |
| vout->opened -= 1; |
| file->private_data = NULL; |
| |
| if (vout->buffer_allocated) |
| videobuf_mmap_free(q); |
| |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Exiting %s\n", __func__); |
| return ret; |
| } |
| |
| static int omap_vout_open(struct file *file) |
| { |
| struct videobuf_queue *q; |
| struct omap_vout_device *vout = NULL; |
| |
| vout = video_drvdata(file); |
| |
| if (vout == NULL) |
| return -ENODEV; |
| |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Entering %s\n", __func__); |
| |
| /* for now, we only support single open */ |
| if (vout->opened) |
| return -EBUSY; |
| |
| vout->opened += 1; |
| |
| file->private_data = vout; |
| vout->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; |
| |
| q = &vout->vbq; |
| video_vbq_ops.buf_setup = omap_vout_buffer_setup; |
| video_vbq_ops.buf_prepare = omap_vout_buffer_prepare; |
| video_vbq_ops.buf_release = omap_vout_buffer_release; |
| video_vbq_ops.buf_queue = omap_vout_buffer_queue; |
| spin_lock_init(&vout->vbq_lock); |
| |
| videobuf_queue_dma_contig_init(q, &video_vbq_ops, q->dev, |
| &vout->vbq_lock, vout->type, V4L2_FIELD_NONE, |
| sizeof(struct videobuf_buffer), vout, NULL); |
| |
| v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Exiting %s\n", __func__); |
| return 0; |
| } |
| |
| /* |
| * V4L2 ioctls |
| */ |
| static int vidioc_querycap(struct file *file, void *fh, |
| struct v4l2_capability *cap) |
| { |
| struct omap_vout_device *vout = fh; |
| |
| strlcpy(cap->driver, VOUT_NAME, sizeof(cap->driver)); |
| strlcpy(cap->card, vout->vfd->name, sizeof(cap->card)); |
| cap->bus_info[0] = '\0'; |
| cap->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_OUTPUT | |
| V4L2_CAP_VIDEO_OUTPUT_OVERLAY; |
| cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; |
| |
| return 0; |
| } |
| |
| static int vidioc_enum_fmt_vid_out(struct file *file, void *fh, |
| struct v4l2_fmtdesc *fmt) |
| { |
| int index = fmt->index; |
| |
| if (index >= NUM_OUTPUT_FORMATS) |
| return -EINVAL; |
| |
| fmt->flags = omap_formats[index].flags; |
| strlcpy(fmt->description, omap_formats[index].description, |
| sizeof(fmt->description)); |
| fmt->pixelformat = omap_formats[index].pixelformat; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_fmt_vid_out(struct file *file, void *fh, |
| struct v4l2_format *f) |
| { |
| struct omap_vout_device *vout = fh; |
| |
| f->fmt.pix = vout->pix; |
| return 0; |
| |
| } |
| |
| static int vidioc_try_fmt_vid_out(struct file *file, void *fh, |
| struct v4l2_format *f) |
| { |
| struct omap_overlay *ovl; |
| struct omapvideo_info *ovid; |
| struct omap_video_timings *timing; |
| struct omap_vout_device *vout = fh; |
| struct omap_dss_device *dssdev; |
| |
| ovid = &vout->vid_info; |
| ovl = ovid->overlays[0]; |
| /* get the display device attached to the overlay */ |
| dssdev = ovl->get_device(ovl); |
| |
| if (!dssdev) |
| return -EINVAL; |
| |
| timing = &dssdev->panel.timings; |
| |
| vout->fbuf.fmt.height = timing->y_res; |
| vout->fbuf.fmt.width = timing->x_res; |
| |
| omap_vout_try_format(&f->fmt.pix); |
| return 0; |
| } |
| |
| static int vidioc_s_fmt_vid_out(struct file *file, void *fh, |
| struct v4l2_format *f) |
| { |
| int ret, bpp; |
| struct omap_overlay *ovl; |
| struct omapvideo_info *ovid; |
| struct omap_video_timings *timing; |
| struct omap_vout_device *vout = fh; |
| struct omap_dss_device *dssdev; |
| |
| if (vout->streaming) |
| return -EBUSY; |
| |
| mutex_lock(&vout->lock); |
| |
| ovid = &vout->vid_info; |
| ovl = ovid->overlays[0]; |
| dssdev = ovl->get_device(ovl); |
| |
| /* get the display device attached to the overlay */ |
| if (!dssdev) { |
| ret = -EINVAL; |
| goto s_fmt_vid_out_exit; |
| } |
| timing = &dssdev->panel.timings; |
| |
| /* We dont support RGB24-packed mode if vrfb rotation |
| * is enabled*/ |
| if ((is_rotation_enabled(vout)) && |
| f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) { |
| ret = -EINVAL; |
| goto s_fmt_vid_out_exit; |
| } |
| |
| /* get the framebuffer parameters */ |
| |
| if (is_rotation_90_or_270(vout)) { |
| vout->fbuf.fmt.height = timing->x_res; |
| vout->fbuf.fmt.width = timing->y_res; |
| } else { |
| vout->fbuf.fmt.height = timing->y_res; |
| vout->fbuf.fmt.width = timing->x_res; |
| } |
| |
| /* change to samller size is OK */ |
| |
| bpp = omap_vout_try_format(&f->fmt.pix); |
| f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp; |
| |
| /* try & set the new output format */ |
| vout->bpp = bpp; |
| vout->pix = f->fmt.pix; |
| vout->vrfb_bpp = 1; |
| |
| /* If YUYV then vrfb bpp is 2, for others its 1 */ |
| if (V4L2_PIX_FMT_YUYV == vout->pix.pixelformat || |
| V4L2_PIX_FMT_UYVY == vout->pix.pixelformat) |
| vout->vrfb_bpp = 2; |
| |
| /* set default crop and win */ |
| omap_vout_new_format(&vout->pix, &vout->fbuf, &vout->crop, &vout->win); |
| |
| ret = 0; |
| |
| s_fmt_vid_out_exit: |
| mutex_unlock(&vout->lock); |
| return ret; |
| } |
| |
| static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, |
| struct v4l2_format *f) |
| { |
| int ret = 0; |
| struct omap_vout_device *vout = fh; |
| struct omap_overlay *ovl; |
| struct omapvideo_info *ovid; |
| struct v4l2_window *win = &f->fmt.win; |
| |
| ovid = &vout->vid_info; |
| ovl = ovid->overlays[0]; |
| |
| ret = omap_vout_try_window(&vout->fbuf, win); |
| |
| if (!ret) { |
| if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0) |
| win->global_alpha = 255; |
| else |
| win->global_alpha = f->fmt.win.global_alpha; |
| } |
| |
| return ret; |
| } |
| |
| static int vidioc_s_fmt_vid_overlay(struct file *file, void *fh, |
| struct v4l2_format *f) |
| { |
| int ret = 0; |
| struct omap_overlay *ovl; |
| struct omapvideo_info *ovid; |
| struct omap_vout_device *vout = fh; |
| struct v4l2_window *win = &f->fmt.win; |
| |
| mutex_lock(&vout->lock); |
| ovid = &vout->vid_info; |
| ovl = ovid->overlays[0]; |
| |
| ret = omap_vout_new_window(&vout->crop, &vout->win, &vout->fbuf, win); |
| if (!ret) { |
| /* Video1 plane does not support global alpha on OMAP3 */ |
| if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0) |
| vout->win.global_alpha = 255; |
| else |
| vout->win.global_alpha = f->fmt.win.global_alpha; |
| |
| vout->win.chromakey = f->fmt.win.chromakey; |
| } |
| mutex_unlock(&vout->lock); |
| return ret; |
| } |
| |
| static int vidioc_g_fmt_vid_overlay(struct file *file, void *fh, |
| struct v4l2_format *f) |
| { |
| u32 key_value = 0; |
| struct omap_overlay *ovl; |
| struct omapvideo_info *ovid; |
| struct omap_vout_device *vout = fh; |
| struct omap_overlay_manager_info info; |
| struct v4l2_window *win = &f->fmt.win; |
| |
| ovid = &vout->vid_info; |
| ovl = ovid->overlays[0]; |
| |
| win->w = vout->win.w; |
| win->field = vout->win.field; |
| win->global_alpha = vout->win.global_alpha; |
| |
| if (ovl->manager && ovl->manager->get_manager_info) { |
| ovl->manager->get_manager_info(ovl->manager, &info); |
| key_value = info.trans_key; |
| } |
| win->chromakey = key_value; |
| return 0; |
| } |
| |
| static int vidioc_g_selection(struct file *file, void *fh, struct v4l2_selection *sel) |
| { |
| struct omap_vout_device *vout = fh; |
| struct v4l2_pix_format *pix = &vout->pix; |
| |
| if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) |
| return -EINVAL; |
| |
| switch (sel->target) { |
| case V4L2_SEL_TGT_CROP: |
| sel->r = vout->crop; |
| break; |
| case V4L2_SEL_TGT_CROP_DEFAULT: |
| omap_vout_default_crop(&vout->pix, &vout->fbuf, &sel->r); |
| break; |
| case V4L2_SEL_TGT_CROP_BOUNDS: |
| /* Width and height are always even */ |
| sel->r.width = pix->width & ~1; |
| sel->r.height = pix->height & ~1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int vidioc_s_selection(struct file *file, void *fh, struct v4l2_selection *sel) |
| { |
| int ret = -EINVAL; |
| struct omap_vout_device *vout = fh; |
| struct omapvideo_info *ovid; |
| struct omap_overlay *ovl; |
| struct omap_video_timings *timing; |
| struct omap_dss_device *dssdev; |
| |
| if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) |
| return -EINVAL; |
| |
| if (sel->target != V4L2_SEL_TGT_CROP) |
| return -EINVAL; |
| |
| if (vout->streaming) |
| return -EBUSY; |
| |
| mutex_lock(&vout->lock); |
| ovid = &vout->vid_info; |
| ovl = ovid->overlays[0]; |
| /* get the display device attached to the overlay */ |
| dssdev = ovl->get_device(ovl); |
| |
| if (!dssdev) { |
| ret = -EINVAL; |
| goto s_crop_err; |
| } |
| |
| timing = &dssdev->panel.timings; |
| |
| if (is_rotation_90_or_270(vout)) { |
| vout->fbuf.fmt.height = timing->x_res; |
| vout->fbuf.fmt.width = timing->y_res; |
| } else { |
| vout->fbuf.fmt.height = timing->y_res; |
| vout->fbuf.fmt.width = timing->x_res; |
| } |
| |
| ret = omap_vout_new_crop(&vout->pix, &vout->crop, &vout->win, |
| &vout->fbuf, &sel->r); |
| |
| s_crop_err: |
| mutex_unlock(&vout->lock); |
| return ret; |
| } |
| |
| static int omap_vout_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct omap_vout_device *vout = |
| container_of(ctrl->handler, struct omap_vout_device, ctrl_handler); |
| int ret = 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_ROTATE: { |
| struct omapvideo_info *ovid; |
| int rotation = ctrl->val; |
| |
| ovid = &vout->vid_info; |
| |
| mutex_lock(&vout->lock); |
| if (rotation && ovid->rotation_type == VOUT_ROT_NONE) { |
| mutex_unlock(&vout->lock); |
| ret = -ERANGE; |
| break; |
| } |
| |
| if (rotation && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) { |
| mutex_unlock(&vout->lock); |
| ret = -EINVAL; |
| break; |
| } |
| |
| if (v4l2_rot_to_dss_rot(rotation, &vout->rotation, |
| vout->mirror)) { |
| mutex_unlock(&vout->lock); |
| ret = -EINVAL; |
| break; |
| } |
| mutex_unlock(&vout->lock); |
| break; |
| } |
| case V4L2_CID_BG_COLOR: |
| { |
| struct omap_overlay *ovl; |
| unsigned int color = ctrl->val; |
| struct omap_overlay_manager_info info; |
| |
| ovl = vout->vid_info.overlays[0]; |
| |
| mutex_lock(&vout->lock); |
| if (!ovl->manager || !ovl->manager->get_manager_info) { |
| mutex_unlock(&vout->lock); |
| ret = -EINVAL; |
| break; |
| } |
| |
| ovl->manager->get_manager_info(ovl->manager, &info); |
| info.default_color = color; |
| if (ovl->manager->set_manager_info(ovl->manager, &info)) { |
| mutex_unlock(&vout->lock); |
| ret = -EINVAL; |
| break; |
| } |
| mutex_unlock(&vout->lock); |
| break; |
| } |
| case V4L2_CID_VFLIP: |
| { |
| struct omapvideo_info *ovid; |
| unsigned int mirror = ctrl->val; |
| |
| ovid = &vout->vid_info; |
| |
| mutex_lock(&vout->lock); |
| if (mirror && ovid->rotation_type == VOUT_ROT_NONE) { |
| mutex_unlock(&vout->lock); |
| ret = -ERANGE; |
| break; |
| } |
| |
| if (mirror && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) { |
| mutex_unlock(&vout->lock); |
| ret = -EINVAL; |
| break; |
| } |
| vout->mirror = mirror; |
| mutex_unlock(&vout->lock); |
| break; |
| } |
| default: |
| return -EINVAL; |
| } |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops omap_vout_ctrl_ops = { |
| .s_ctrl = omap_vout_s_ctrl, |
| }; |
| |
| static int vidioc_reqbufs(struct file *file, void *fh, |
| struct v4l2_requestbuffers *req) |
| { |
| int ret = 0; |
| unsigned int i, num_buffers = 0; |
| struct omap_vout_device *vout = fh; |
| struct videobuf_queue *q = &vout->vbq; |
| |
| if (req->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) |
| return -EINVAL; |
| /* if memory is not mmp or userptr |
| return error */ |
| if ((V4L2_MEMORY_MMAP != req->memory) && |
| (V4L2_MEMORY_USERPTR != req->memory)) |
| return -EINVAL; |
| |
| mutex_lock(&vout->lock); |
| /* Cannot be requested when streaming is on */ |
| if (vout->streaming) { |
| ret = -EBUSY; |
| goto reqbuf_err; |
| } |
| |
| /* If buffers are already allocated free them */ |
| if (q->bufs[0] && (V4L2_MEMORY_MMAP == q->bufs[0]->memory)) { |
| if (vout->mmap_count) { |
| ret = -EBUSY; |
| goto reqbuf_err; |
| } |
| num_buffers = (vout->vid == OMAP_VIDEO1) ? |
| video1_numbuffers : video2_numbuffers; |
| for (i = num_buffers; i < vout->buffer_allocated; i++) { |
| omap_vout_free_buffer(vout->buf_virt_addr[i], |
| vout->buffer_size); |
| vout->buf_virt_addr[i] = 0; |
| vout->buf_phy_addr[i] = 0; |
| } |
| vout->buffer_allocated = num_buffers; |
| videobuf_mmap_free(q); |
| } else if (q->bufs[0] && (V4L2_MEMORY_USERPTR == q->bufs[0]->memory)) { |
| if (vout->buffer_allocated) { |
| videobuf_mmap_free(q); |
| for (i = 0; i < vout->buffer_allocated; i++) { |
| kfree(q->bufs[i]); |
| q->bufs[i] = NULL; |
| } |
| vout->buffer_allocated = 0; |
| } |
| } |
| |
| /*store the memory type in data structure */ |
| vout->memory = req->memory; |
| |
| INIT_LIST_HEAD(&vout->dma_queue); |
| |
| /* call videobuf_reqbufs api */ |
| ret = videobuf_reqbufs(q, req); |
| if (ret < 0) |
| goto reqbuf_err; |
| |
| vout->buffer_allocated = req->count; |
| |
| reqbuf_err: |
| mutex_unlock(&vout->lock); |
| return ret; |
| } |
| |
| static int vidioc_querybuf(struct file *file, void *fh, |
| struct v4l2_buffer *b) |
| { |
| struct omap_vout_device *vout = fh; |
| |
| return videobuf_querybuf(&vout->vbq, b); |
| } |
| |
| static int vidioc_qbuf(struct file *file, void *fh, |
| struct v4l2_buffer *buffer) |
| { |
| struct omap_vout_device *vout = fh; |
| struct videobuf_queue *q = &vout->vbq; |
| |
| if ((V4L2_BUF_TYPE_VIDEO_OUTPUT != buffer->type) || |
| (buffer->index >= vout->buffer_allocated) || |
| (q->bufs[buffer->index]->memory != buffer->memory)) { |
| return -EINVAL; |
| } |
| if (V4L2_MEMORY_USERPTR == buffer->memory) { |
| if ((buffer->length < vout->pix.sizeimage) || |
| (0 == buffer->m.userptr)) { |
| return -EINVAL; |
| } |
| } |
| |
| if ((is_rotation_enabled(vout)) && |
| vout->vrfb_dma_tx.req_status == DMA_CHAN_NOT_ALLOTED) { |
| v4l2_warn(&vout->vid_dev->v4l2_dev, |
| "DMA Channel not allocated for Rotation\n"); |
| return -EINVAL; |
| } |
| |
| return videobuf_qbuf(q, buffer); |
| } |
| |
| static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b) |
| { |
| struct omap_vout_device *vout = fh; |
| struct videobuf_queue *q = &vout->vbq; |
| |
| int ret; |
| u32 addr; |
| unsigned long size; |
| struct videobuf_buffer *vb; |
| |
| if (!vout->streaming) |
| return -EINVAL; |
| |
| ret = videobuf_dqbuf(q, b, !!(file->f_flags & O_NONBLOCK)); |
| if (ret) |
| return ret; |
| |
| vb = q->bufs[b->index]; |
| |
| addr = (unsigned long) vout->buf_phy_addr[vb->i]; |
| size = (unsigned long) vb->size; |
| dma_unmap_single(vout->vid_dev->v4l2_dev.dev, addr, |
| size, DMA_TO_DEVICE); |
| return 0; |
| } |
| |
| static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) |
| { |
| int ret = 0, j; |
| u32 addr = 0, mask = 0; |
| struct omap_vout_device *vout = fh; |
| struct videobuf_queue *q = &vout->vbq; |
| struct omapvideo_info *ovid = &vout->vid_info; |
| |
| mutex_lock(&vout->lock); |
| |
| if (vout->streaming) { |
| ret = -EBUSY; |
| goto streamon_err; |
| } |
| |
| ret = videobuf_streamon(q); |
| if (ret) |
| goto streamon_err; |
| |
| if (list_empty(&vout->dma_queue)) { |
| ret = -EIO; |
| goto streamon_err1; |
| } |
| |
| /* Get the next frame from the buffer queue */ |
| vout->next_frm = vout->cur_frm = list_entry(vout->dma_queue.next, |
| struct videobuf_buffer, queue); |
| /* Remove buffer from the buffer queue */ |
| list_del(&vout->cur_frm->queue); |
| /* Mark state of the current frame to active */ |
| vout->cur_frm->state = VIDEOBUF_ACTIVE; |
| /* Initialize field_id and started member */ |
| vout->field_id = 0; |
| |
| /* set flag here. Next QBUF will start DMA */ |
| vout->streaming = true; |
| |
| vout->first_int = 1; |
| |
| if (omap_vout_calculate_offset(vout)) { |
| ret = -EINVAL; |
| goto streamon_err1; |
| } |
| addr = (unsigned long) vout->queued_buf_addr[vout->cur_frm->i] |
| + vout->cropped_offset; |
| |
| mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD |
| | DISPC_IRQ_VSYNC2; |
| |
| /* First save the configuration in ovelray structure */ |
| ret = omapvid_init(vout, addr); |
| if (ret) { |
| v4l2_err(&vout->vid_dev->v4l2_dev, |
| "failed to set overlay info\n"); |
| goto streamon_err1; |
| } |
| |
| omap_dispc_register_isr(omap_vout_isr, vout, mask); |
| |
| /* Enable the pipeline and set the Go bit */ |
| ret = omapvid_apply_changes(vout); |
| if (ret) |
| v4l2_err(&vout->vid_dev->v4l2_dev, "failed to change mode\n"); |
| |
| for (j = 0; j < ovid->num_overlays; j++) { |
| struct omap_overlay *ovl = ovid->overlays[j]; |
| struct omap_dss_device *dssdev = ovl->get_device(ovl); |
| |
| if (dssdev) { |
| ret = ovl->enable(ovl); |
| if (ret) |
| goto streamon_err1; |
| } |
| } |
| |
| ret = 0; |
| |
| streamon_err1: |
| if (ret) |
| ret = videobuf_streamoff(q); |
| streamon_err: |
| mutex_unlock(&vout->lock); |
| return ret; |
| } |
| |
| static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) |
| { |
| u32 mask = 0; |
| int ret = 0, j; |
| struct omap_vout_device *vout = fh; |
| struct omapvideo_info *ovid = &vout->vid_info; |
| |
| if (!vout->streaming) |
| return -EINVAL; |
| |
| vout->streaming = false; |
| mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD |
| | DISPC_IRQ_VSYNC2; |
| |
| omap_dispc_unregister_isr(omap_vout_isr, vout, mask); |
| |
| for (j = 0; j < ovid->num_overlays; j++) { |
| struct omap_overlay *ovl = ovid->overlays[j]; |
| struct omap_dss_device *dssdev = ovl->get_device(ovl); |
| |
| if (dssdev) |
| ovl->disable(ovl); |
| } |
| |
| /* Turn of the pipeline */ |
| ret = omapvid_apply_changes(vout); |
| if (ret) |
| v4l2_err(&vout->vid_dev->v4l2_dev, |
| "failed to change mode in streamoff\n"); |
| |
| INIT_LIST_HEAD(&vout->dma_queue); |
| ret = videobuf_streamoff(&vout->vbq); |
| |
| return ret; |
| } |
| |
| static int vidioc_s_fbuf(struct file *file, void *fh, |
| const struct v4l2_framebuffer *a) |
| { |
| int enable = 0; |
| struct omap_overlay *ovl; |
| struct omapvideo_info *ovid; |
| struct omap_vout_device *vout = fh; |
| struct omap_overlay_manager_info info; |
| enum omap_dss_trans_key_type key_type = OMAP_DSS_COLOR_KEY_GFX_DST; |
| |
| ovid = &vout->vid_info; |
| ovl = ovid->overlays[0]; |
| |
| /* OMAP DSS doesn't support Source and Destination color |
| key together */ |
| if ((a->flags & V4L2_FBUF_FLAG_SRC_CHROMAKEY) && |
| (a->flags & V4L2_FBUF_FLAG_CHROMAKEY)) |
| return -EINVAL; |
| /* OMAP DSS Doesn't support the Destination color key |
| and alpha blending together */ |
| if ((a->flags & V4L2_FBUF_FLAG_CHROMAKEY) && |
| (a->flags & V4L2_FBUF_FLAG_LOCAL_ALPHA)) |
| return -EINVAL; |
| |
| if ((a->flags & V4L2_FBUF_FLAG_SRC_CHROMAKEY)) { |
| vout->fbuf.flags |= V4L2_FBUF_FLAG_SRC_CHROMAKEY; |
| key_type = OMAP_DSS_COLOR_KEY_VID_SRC; |
| } else |
| vout->fbuf.flags &= ~V4L2_FBUF_FLAG_SRC_CHROMAKEY; |
| |
| if ((a->flags & V4L2_FBUF_FLAG_CHROMAKEY)) { |
| vout->fbuf.flags |= V4L2_FBUF_FLAG_CHROMAKEY; |
| key_type = OMAP_DSS_COLOR_KEY_GFX_DST; |
| } else |
| vout->fbuf.flags &= ~V4L2_FBUF_FLAG_CHROMAKEY; |
| |
| if (a->flags & (V4L2_FBUF_FLAG_CHROMAKEY | |
| V4L2_FBUF_FLAG_SRC_CHROMAKEY)) |
| enable = 1; |
| else |
| enable = 0; |
| if (ovl->manager && ovl->manager->get_manager_info && |
| ovl->manager->set_manager_info) { |
| |
| ovl->manager->get_manager_info(ovl->manager, &info); |
| info.trans_enabled = enable; |
| info.trans_key_type = key_type; |
| info.trans_key = vout->win.chromakey; |
| |
| if (ovl->manager->set_manager_info(ovl->manager, &info)) |
| return -EINVAL; |
| } |
| if (a->flags & V4L2_FBUF_FLAG_LOCAL_ALPHA) { |
| vout->fbuf.flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA; |
| enable = 1; |
| } else { |
| vout->fbuf.flags &= ~V4L2_FBUF_FLAG_LOCAL_ALPHA; |
| enable = 0; |
| } |
| if (ovl->manager && ovl->manager->get_manager_info && |
| ovl->manager->set_manager_info) { |
| ovl->manager->get_manager_info(ovl->manager, &info); |
| /* enable this only if there is no zorder cap */ |
| if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0) |
| info.partial_alpha_enabled = enable; |
| if (ovl->manager->set_manager_info(ovl->manager, &info)) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int vidioc_g_fbuf(struct file *file, void *fh, |
| struct v4l2_framebuffer *a) |
| { |
| struct omap_overlay *ovl; |
| struct omapvideo_info *ovid; |
| struct omap_vout_device *vout = fh; |
| struct omap_overlay_manager_info info; |
| |
| ovid = &vout->vid_info; |
| ovl = ovid->overlays[0]; |
| |
| /* The video overlay must stay within the framebuffer and can't be |
| positioned independently. */ |
| a->flags = V4L2_FBUF_FLAG_OVERLAY; |
| a->capability = V4L2_FBUF_CAP_LOCAL_ALPHA | V4L2_FBUF_CAP_CHROMAKEY |
| | V4L2_FBUF_CAP_SRC_CHROMAKEY; |
| |
| if (ovl->manager && ovl->manager->get_manager_info) { |
| ovl->manager->get_manager_info(ovl->manager, &info); |
| if (info.trans_key_type == OMAP_DSS_COLOR_KEY_VID_SRC) |
| a->flags |= V4L2_FBUF_FLAG_SRC_CHROMAKEY; |
| if (info.trans_key_type == OMAP_DSS_COLOR_KEY_GFX_DST) |
| a->flags |= V4L2_FBUF_FLAG_CHROMAKEY; |
| } |
| if (ovl->manager && ovl->manager->get_manager_info) { |
| ovl->manager->get_manager_info(ovl->manager, &info); |
| if (info.partial_alpha_enabled) |
| a->flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA; |
| } |
| |
| return 0; |
| } |
| |
| static const struct v4l2_ioctl_ops vout_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, |
| .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, |
| .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, |
| .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, |
| .vidioc_s_fbuf = vidioc_s_fbuf, |
| .vidioc_g_fbuf = vidioc_g_fbuf, |
| .vidioc_try_fmt_vid_out_overlay = vidioc_try_fmt_vid_overlay, |
| .vidioc_s_fmt_vid_out_overlay = vidioc_s_fmt_vid_overlay, |
| .vidioc_g_fmt_vid_out_overlay = vidioc_g_fmt_vid_overlay, |
| .vidioc_g_selection = vidioc_g_selection, |
| .vidioc_s_selection = vidioc_s_selection, |
| .vidioc_reqbufs = vidioc_reqbufs, |
| .vidioc_querybuf = vidioc_querybuf, |
| .vidioc_qbuf = vidioc_qbuf, |
| .vidioc_dqbuf = vidioc_dqbuf, |
| .vidioc_streamon = vidioc_streamon, |
| .vidioc_streamoff = vidioc_streamoff, |
| }; |
| |
| static const struct v4l2_file_operations omap_vout_fops = { |
| .owner = THIS_MODULE, |
| .poll = omap_vout_poll, |
| .unlocked_ioctl = video_ioctl2, |
| .mmap = omap_vout_mmap, |
| .open = omap_vout_open, |
| .release = omap_vout_release, |
| }; |
| |
| /* Init functions used during driver initialization */ |
| /* Initial setup of video_data */ |
| static int __init omap_vout_setup_video_data(struct omap_vout_device *vout) |
| { |
| struct video_device *vfd; |
| struct v4l2_pix_format *pix; |
| struct omap_overlay *ovl = vout->vid_info.overlays[0]; |
| struct omap_dss_device *display = ovl->get_device(ovl); |
| struct v4l2_ctrl_handler *hdl; |
| |
| /* set the default pix */ |
| pix = &vout->pix; |
| |
| /* Set the default picture of QVGA */ |
| pix->width = QQVGA_WIDTH; |
| pix->height = QQVGA_HEIGHT; |
| |
| /* Default pixel format is RGB 5-6-5 */ |
| pix->pixelformat = V4L2_PIX_FMT_RGB565; |
| pix->field = V4L2_FIELD_ANY; |
| pix->bytesperline = pix->width * 2; |
| pix->sizeimage = pix->bytesperline * pix->height; |
| pix->colorspace = V4L2_COLORSPACE_JPEG; |
| |
| vout->bpp = RGB565_BPP; |
| vout->fbuf.fmt.width = display->panel.timings.x_res; |
| vout->fbuf.fmt.height = display->panel.timings.y_res; |
| |
| /* Set the data structures for the overlay parameters*/ |
| vout->win.global_alpha = 255; |
| vout->fbuf.flags = 0; |
| vout->fbuf.capability = V4L2_FBUF_CAP_LOCAL_ALPHA | |
| V4L2_FBUF_CAP_SRC_CHROMAKEY | V4L2_FBUF_CAP_CHROMAKEY; |
| vout->win.chromakey = 0; |
| |
| omap_vout_new_format(pix, &vout->fbuf, &vout->crop, &vout->win); |
| |
| hdl = &vout->ctrl_handler; |
| v4l2_ctrl_handler_init(hdl, 3); |
| v4l2_ctrl_new_std(hdl, &omap_vout_ctrl_ops, |
| V4L2_CID_ROTATE, 0, 270, 90, 0); |
| v4l2_ctrl_new_std(hdl, &omap_vout_ctrl_ops, |
| V4L2_CID_BG_COLOR, 0, 0xffffff, 1, 0); |
| v4l2_ctrl_new_std(hdl, &omap_vout_ctrl_ops, |
| V4L2_CID_VFLIP, 0, 1, 1, 0); |
| if (hdl->error) |
| return hdl->error; |
| |
| vout->rotation = 0; |
| vout->mirror = false; |
| if (vout->vid_info.rotation_type == VOUT_ROT_VRFB) |
| vout->vrfb_bpp = 2; |
| |
| /* initialize the video_device struct */ |
| vfd = vout->vfd = video_device_alloc(); |
| |
| if (!vfd) { |
| printk(KERN_ERR VOUT_NAME |
| ": could not allocate video device struct\n"); |
| v4l2_ctrl_handler_free(hdl); |
| return -ENOMEM; |
| } |
| vfd->ctrl_handler = hdl; |
| vfd->release = video_device_release; |
| vfd->ioctl_ops = &vout_ioctl_ops; |
| |
| strlcpy(vfd->name, VOUT_NAME, sizeof(vfd->name)); |
| |
| vfd->fops = &omap_vout_fops; |
| vfd->v4l2_dev = &vout->vid_dev->v4l2_dev; |
| vfd->vfl_dir = VFL_DIR_TX; |
| mutex_init(&vout->lock); |
| |
| vfd->minor = -1; |
| return 0; |
| |
| } |
| |
| /* Setup video buffers */ |
| static int __init omap_vout_setup_video_bufs(struct platform_device *pdev, |
| int vid_num) |
| { |
| u32 numbuffers; |
| int ret = 0, i; |
| struct omapvideo_info *ovid; |
| struct omap_vout_device *vout; |
| struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); |
| struct omap2video_device *vid_dev = |
| container_of(v4l2_dev, struct omap2video_device, v4l2_dev); |
| |
| vout = vid_dev->vouts[vid_num]; |
| ovid = &vout->vid_info; |
| |
| numbuffers = (vid_num == 0) ? video1_numbuffers : video2_numbuffers; |
| vout->buffer_size = (vid_num == 0) ? video1_bufsize : video2_bufsize; |
| dev_info(&pdev->dev, "Buffer Size = %d\n", vout->buffer_size); |
| |
| for (i = 0; i < numbuffers; i++) { |
| vout->buf_virt_addr[i] = |
| omap_vout_alloc_buffer(vout->buffer_size, |
| (u32 *) &vout->buf_phy_addr[i]); |
| if (!vout->buf_virt_addr[i]) { |
| numbuffers = i; |
| ret = -ENOMEM; |
| goto free_buffers; |
| } |
| } |
| |
| vout->cropped_offset = 0; |
| |
| if (ovid->rotation_type == VOUT_ROT_VRFB) { |
| bool static_vrfb_allocation = (vid_num == 0) ? |
| vid1_static_vrfb_alloc : vid2_static_vrfb_alloc; |
| ret = omap_vout_setup_vrfb_bufs(pdev, vid_num, |
| static_vrfb_allocation); |
| } |
| |
| return ret; |
| |
| free_buffers: |
| for (i = 0; i < numbuffers; i++) { |
| omap_vout_free_buffer(vout->buf_virt_addr[i], |
| vout->buffer_size); |
| vout->buf_virt_addr[i] = 0; |
| vout->buf_phy_addr[i] = 0; |
| } |
| return ret; |
| |
| } |
| |
| /* Create video out devices */ |
| static int __init omap_vout_create_video_devices(struct platform_device *pdev) |
| { |
| int ret = 0, k; |
| struct omap_vout_device *vout; |
| struct video_device *vfd = NULL; |
| struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); |
| struct omap2video_device *vid_dev = container_of(v4l2_dev, |
| struct omap2video_device, v4l2_dev); |
| |
| for (k = 0; k < pdev->num_resources; k++) { |
| |
| vout = kzalloc(sizeof(struct omap_vout_device), GFP_KERNEL); |
| if (!vout) { |
| dev_err(&pdev->dev, ": could not allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| vout->vid = k; |
| vid_dev->vouts[k] = vout; |
| vout->vid_dev = vid_dev; |
| /* Select video2 if only 1 overlay is controlled by V4L2 */ |
| if (pdev->num_resources == 1) |
| vout->vid_info.overlays[0] = vid_dev->overlays[k + 2]; |
| else |
| /* Else select video1 and video2 one by one. */ |
| vout->vid_info.overlays[0] = vid_dev->overlays[k + 1]; |
| vout->vid_info.num_overlays = 1; |
| vout->vid_info.id = k + 1; |
| |
| /* Set VRFB as rotation_type for omap2 and omap3 */ |
| if (omap_vout_dss_omap24xx() || omap_vout_dss_omap34xx()) |
| vout->vid_info.rotation_type = VOUT_ROT_VRFB; |
| |
| /* Setup the default configuration for the video devices |
| */ |
| if (omap_vout_setup_video_data(vout) != 0) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| /* Allocate default number of buffers for the video streaming |
| * and reserve the VRFB space for rotation |
| */ |
| if (omap_vout_setup_video_bufs(pdev, k) != 0) { |
| ret = -ENOMEM; |
| goto error1; |
| } |
| |
| /* Register the Video device with V4L2 |
| */ |
| vfd = vout->vfd; |
| if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) { |
| dev_err(&pdev->dev, |
| ": Could not register Video for Linux device\n"); |
| vfd->minor = -1; |
| ret = -ENODEV; |
| goto error2; |
| } |
| video_set_drvdata(vfd, vout); |
| |
| dev_info(&pdev->dev, |
| ": registered and initialized video device %d\n", |
| vfd->minor); |
| if (k == (pdev->num_resources - 1)) |
| return 0; |
| |
| continue; |
| error2: |
| if (vout->vid_info.rotation_type == VOUT_ROT_VRFB) |
| omap_vout_release_vrfb(vout); |
| omap_vout_free_buffers(vout); |
| error1: |
| video_device_release(vfd); |
| error: |
| kfree(vout); |
| return ret; |
| } |
| |
| return -ENODEV; |
| } |
| /* Driver functions */ |
| static void omap_vout_cleanup_device(struct omap_vout_device *vout) |
| { |
| struct video_device *vfd; |
| struct omapvideo_info *ovid; |
| |
| if (!vout) |
| return; |
| |
| vfd = vout->vfd; |
| ovid = &vout->vid_info; |
| if (vfd) { |
| if (!video_is_registered(vfd)) { |
| /* |
| * The device was never registered, so release the |
| * video_device struct directly. |
| */ |
| video_device_release(vfd); |
| } else { |
| /* |
| * The unregister function will release the video_device |
| * struct as well as unregistering it. |
| */ |
| video_unregister_device(vfd); |
| } |
| } |
| v4l2_ctrl_handler_free(&vout->ctrl_handler); |
| if (ovid->rotation_type == VOUT_ROT_VRFB) { |
| omap_vout_release_vrfb(vout); |
| /* Free the VRFB buffer if allocated |
| * init time |
| */ |
| if (vout->vrfb_static_allocation) |
| omap_vout_free_vrfb_buffers(vout); |
| } |
| omap_vout_free_buffers(vout); |
| |
| kfree(vout); |
| } |
| |
| static int omap_vout_remove(struct platform_device *pdev) |
| { |
| int k; |
| struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); |
| struct omap2video_device *vid_dev = container_of(v4l2_dev, struct |
| omap2video_device, v4l2_dev); |
| |
| v4l2_device_unregister(v4l2_dev); |
| for (k = 0; k < pdev->num_resources; k++) |
| omap_vout_cleanup_device(vid_dev->vouts[k]); |
| |
| for (k = 0; k < vid_dev->num_displays; k++) { |
| if (vid_dev->displays[k]->state != OMAP_DSS_DISPLAY_DISABLED) |
| vid_dev->displays[k]->driver->disable(vid_dev->displays[k]); |
| |
| omap_dss_put_device(vid_dev->displays[k]); |
| } |
| kfree(vid_dev); |
| return 0; |
| } |
| |
| static int __init omap_vout_probe(struct platform_device *pdev) |
| { |
| int ret = 0, i; |
| struct omap_overlay *ovl; |
| struct omap_dss_device *dssdev = NULL; |
| struct omap_dss_device *def_display; |
| struct omap2video_device *vid_dev = NULL; |
| |
| if (omapdss_is_initialized() == false) |
| return -EPROBE_DEFER; |
| |
| ret = omapdss_compat_init(); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to init dss\n"); |
| return ret; |
| } |
| |
| if (pdev->num_resources == 0) { |
| dev_err(&pdev->dev, "probed for an unknown device\n"); |
| ret = -ENODEV; |
| goto err_dss_init; |
| } |
| |
| vid_dev = kzalloc(sizeof(struct omap2video_device), GFP_KERNEL); |
| if (vid_dev == NULL) { |
| ret = -ENOMEM; |
| goto err_dss_init; |
| } |
| |
| vid_dev->num_displays = 0; |
| for_each_dss_dev(dssdev) { |
| omap_dss_get_device(dssdev); |
| |
| if (!dssdev->driver) { |
| dev_warn(&pdev->dev, "no driver for display: %s\n", |
| dssdev->name); |
| omap_dss_put_device(dssdev); |
| continue; |
| } |
| |
| vid_dev->displays[vid_dev->num_displays++] = dssdev; |
| } |
| |
| if (vid_dev->num_displays == 0) { |
| dev_err(&pdev->dev, "no displays\n"); |
| ret = -EINVAL; |
| goto probe_err0; |
| } |
| |
| vid_dev->num_overlays = omap_dss_get_num_overlays(); |
| for (i = 0; i < vid_dev->num_overlays; i++) |
| vid_dev->overlays[i] = omap_dss_get_overlay(i); |
| |
| vid_dev->num_managers = omap_dss_get_num_overlay_managers(); |
| for (i = 0; i < vid_dev->num_managers; i++) |
| vid_dev->managers[i] = omap_dss_get_overlay_manager(i); |
| |
| /* Get the Video1 overlay and video2 overlay. |
| * Setup the Display attached to that overlays |
| */ |
| for (i = 1; i < vid_dev->num_overlays; i++) { |
| ovl = omap_dss_get_overlay(i); |
| dssdev = ovl->get_device(ovl); |
| |
| if (dssdev) { |
| def_display = dssdev; |
| } else { |
| dev_warn(&pdev->dev, "cannot find display\n"); |
| def_display = NULL; |
| } |
| if (def_display) { |
| struct omap_dss_driver *dssdrv = def_display->driver; |
| |
| ret = dssdrv->enable(def_display); |
| if (ret) { |
| /* Here we are not considering a error |
| * as display may be enabled by frame |
| * buffer driver |
| */ |
| dev_warn(&pdev->dev, |
| "'%s' Display already enabled\n", |
| def_display->name); |
| } |
| } |
| } |
| |
| if (v4l2_device_register(&pdev->dev, &vid_dev->v4l2_dev) < 0) { |
| dev_err(&pdev->dev, "v4l2_device_register failed\n"); |
| ret = -ENODEV; |
| goto probe_err1; |
| } |
| |
| ret = omap_vout_create_video_devices(pdev); |
| if (ret) |
| goto probe_err2; |
| |
| for (i = 0; i < vid_dev->num_displays; i++) { |
| struct omap_dss_device *display = vid_dev->displays[i]; |
| |
| if (display->driver->update) |
| display->driver->update(display, 0, 0, |
| display->panel.timings.x_res, |
| display->panel.timings.y_res); |
| } |
| return 0; |
| |
| probe_err2: |
| v4l2_device_unregister(&vid_dev->v4l2_dev); |
| probe_err1: |
| for (i = 1; i < vid_dev->num_overlays; i++) { |
| def_display = NULL; |
| ovl = omap_dss_get_overlay(i); |
| dssdev = ovl->get_device(ovl); |
| |
| if (dssdev) |
| def_display = dssdev; |
| |
| if (def_display && def_display->driver) |
| def_display->driver->disable(def_display); |
| } |
| probe_err0: |
| kfree(vid_dev); |
| err_dss_init: |
| omapdss_compat_uninit(); |
| return ret; |
| } |
| |
| static struct platform_driver omap_vout_driver = { |
| .driver = { |
| .name = VOUT_NAME, |
| }, |
| .remove = omap_vout_remove, |
| }; |
| |
| static int __init omap_vout_init(void) |
| { |
| if (platform_driver_probe(&omap_vout_driver, omap_vout_probe) != 0) { |
| printk(KERN_ERR VOUT_NAME ":Could not register Video driver\n"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void omap_vout_cleanup(void) |
| { |
| platform_driver_unregister(&omap_vout_driver); |
| } |
| |
| late_initcall(omap_vout_init); |
| module_exit(omap_vout_cleanup); |