Merge branch 'misc2' into devel
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index da42ab4..74a8b6f 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -88,12 +88,12 @@
This is used primarily during fault processing.
5) void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
At the end of every page fault, this routine is invoked to
tell the architecture specific code that a translation
- described by "pte" now exists at virtual address "address"
- for address space "vma->vm_mm", in the software page tables.
+ now exists at virtual address "address" for address space
+ "vma->vm_mm", in the software page tables.
A port may use this information in any way it so chooses.
For example, it could use this event to pre-load TLB
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 870d190..0a46833 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -493,3 +493,52 @@
Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
+
+What: usbvideo quickcam_messenger driver
+When: 2.6.35
+Files: drivers/media/video/usbvideo/quickcam_messenger.[ch]
+Why: obsolete v4l1 driver replaced by gspca_stv06xx
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: ov511 v4l1 driver
+When: 2.6.35
+Files: drivers/media/video/ov511.[ch]
+Why: obsolete v4l1 driver replaced by gspca_ov519
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: w9968cf v4l1 driver
+When: 2.6.35
+Files: drivers/media/video/w9968cf*.[ch]
+Why: obsolete v4l1 driver replaced by gspca_ov519
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: ovcamchip sensor framework
+When: 2.6.35
+Files: drivers/media/video/ovcamchip/*
+Why: Only used by obsoleted v4l1 drivers
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: stv680 v4l1 driver
+When: 2.6.35
+Files: drivers/media/video/stv680.[ch]
+Why: obsolete v4l1 driver replaced by gspca_stv0680
+Who: Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What: zc0301 v4l driver
+When: 2.6.35
+Files: drivers/media/video/zc0301/*
+Why: Duplicate functionality with the gspca_zc3xx driver, zc0301 only
+ supports 2 USB-ID's (because it only supports a limited set of
+ sensors) wich are also supported by the gspca_zc3xx driver
+ (which supports 53 USB-ID's in total)
+Who: Hans de Goede <hdegoede@redhat.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index c8f47bf..1858646 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -410,9 +410,8 @@
ALPHA PORT
M: Richard Henderson <rth@twiddle.net>
-S: Odd Fixes for 2.4; Maintained for 2.6.
M: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
-S: Maintained for 2.4; PCI support for 2.6.
+M: Matt Turner <mattst88@gmail.com>
L: linux-alpha@vger.kernel.org
F: arch/alpha/
@@ -1638,9 +1637,8 @@
F: sound/pci/cs5535audio/
CX18 VIDEO4LINUX DRIVER
-M: Hans Verkuil <hverkuil@xs4all.nl>
M: Andy Walls <awalls@radix.net>
-L: ivtv-devel@ivtvdriver.org
+L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://linuxtv.org
@@ -3012,8 +3010,8 @@
F: drivers/isdn/hardware/eicon/
IVTV VIDEO4LINUX DRIVER
-M: Hans Verkuil <hverkuil@xs4all.nl>
-L: ivtv-devel@ivtvdriver.org
+M: Andy Walls <awalls@radix.net>
+L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.ivtvdriver.org
diff --git a/Makefile b/Makefile
index 9f64552..5f333bf 100644
--- a/Makefile
+++ b/Makefile
@@ -18,10 +18,9 @@
# Avoid funny character set dependencies
unexport LC_ALL
-LC_CTYPE=C
LC_COLLATE=C
LC_NUMERIC=C
-export LC_CTYPE LC_COLLATE LC_NUMERIC
+export LC_COLLATE LC_NUMERIC
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 3f0c59f6..71a2432 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -329,7 +329,7 @@
* tables contain all the necessary information.
*/
extern inline void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/alpha/include/asm/topology.h b/arch/alpha/include/asm/topology.h
index 36b3a30..9251e13 100644
--- a/arch/alpha/include/asm/topology.h
+++ b/arch/alpha/include/asm/topology.h
@@ -28,6 +28,9 @@
{
int cpu;
+ if (node == -1)
+ return cpu_all_mask;
+
cpumask_clear(&node_to_cpumask_map[node]);
for_each_online_cpu(cpu) {
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 04247ba..e932da0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -21,6 +21,8 @@
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
+ select HAVE_PERF_EVENTS
+ select PERF_USE_VMALLOC
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@@ -559,6 +561,15 @@
<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
+config ARCH_NUC93X
+ bool "Nuvoton NUC93X CPU"
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ help
+ Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
+ low-power and high performance MPEG-4/JPEG multimedia controller chip.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
@@ -739,14 +750,26 @@
endchoice
+source "arch/arm/mach-aaec2000/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-bcmring/Kconfig"
+
source "arch/arm/mach-clps711x/Kconfig"
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-gemini/Kconfig"
+source "arch/arm/mach-h720x/Kconfig"
+
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
@@ -761,16 +784,28 @@
source "arch/arm/mach-ixp23xx/Kconfig"
+source "arch/arm/mach-kirkwood/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
+source "arch/arm/mach-lh7a40x/Kconfig"
+
source "arch/arm/mach-loki/Kconfig"
+source "arch/arm/mach-msm/Kconfig"
+
source "arch/arm/mach-mv78xx0/Kconfig"
-source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
-source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-netx/Kconfig"
-source "arch/arm/mach-sa1100/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
+
+source "arch/arm/mach-ns9xxx/Kconfig"
+
+source "arch/arm/mach-nuc93x/Kconfig"
source "arch/arm/plat-omap/Kconfig"
@@ -780,9 +815,14 @@
source "arch/arm/mach-orion5x/Kconfig"
-source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
-source "arch/arm/mach-dove/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-realview/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
@@ -810,41 +850,14 @@
source "arch/arm/mach-s5pc100/Kconfig"
endif
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/mach-u300/Kconfig"
-source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
-source "arch/arm/mach-aaec2000/Kconfig"
-
-source "arch/arm/mach-realview/Kconfig"
-
-source "arch/arm/mach-at91/Kconfig"
-
-source "arch/arm/plat-mxc/Kconfig"
-
-source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
-
-source "arch/arm/mach-netx/Kconfig"
-
-source "arch/arm/mach-ns9xxx/Kconfig"
-
-source "arch/arm/mach-davinci/Kconfig"
-
-source "arch/arm/mach-ks8695/Kconfig"
-
-source "arch/arm/mach-msm/Kconfig"
-
-source "arch/arm/mach-u300/Kconfig"
-
source "arch/arm/mach-w90x900/Kconfig"
-source "arch/arm/mach-bcmring/Kconfig"
-
-source "arch/arm/mach-ux500/Kconfig"
-
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -876,6 +889,11 @@
depends on CPU_XSCALE && !XSCALE_PMU_TIMER
default y
+config CPU_HAS_PMU
+ depends on CPU_V6 || CPU_V7 || XSCALE_PMU
+ default y
+ bool
+
if !MMU
source "arch/arm/Kconfig-nommu"
endif
@@ -1193,6 +1211,14 @@
depends on HIGHMEM
depends on !OUTER_CACHE
+config HW_PERF_EVENTS
+ bool "Enable hardware performance counter support for perf events"
+ depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7)
+ default y
+ help
+ Enable hardware performance counter support for perf events. If
+ disabled, perf events will use software events only.
+
source "mm/Kconfig"
config LEDS
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e9da084..52a820d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -146,6 +146,7 @@
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
@@ -170,13 +171,14 @@
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
+machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
-machine-$(CONFIG_ARCH_MXC91231) := mxc91231
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
+plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
@@ -184,7 +186,6 @@
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung
-plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index d356af7..99b75aa 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -22,19 +22,27 @@
#if defined(CONFIG_DEBUG_ICEDCC)
#ifdef CONFIG_CPU_V6
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
+#elif defined(CONFIG_CPU_V7)
+ .macro loadsp, rb, tmp
+ .endm
+ .macro writeb, ch, rb
+wait: mrc p14, 0, pc, c0, c1, 0
+ bcs wait
+ mcr p14, 0, \ch, c0, c5, 0
+ .endm
#elif defined(CONFIG_CPU_XSCALE)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c8, c0, 0
.endm
#else
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c1, c0, 0
@@ -50,7 +58,7 @@
.endm
#if defined(CONFIG_ARCH_SA1100)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
mov \rb, #0x80000000 @ physical base address
#ifdef CONFIG_DEBUG_LL_SER3
add \rb, \rb, #0x00050000 @ Ser3
@@ -59,13 +67,13 @@
#endif
.endm
#elif defined(CONFIG_ARCH_S3C2410)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
mov \rb, #0x50000000
add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
.endm
#else
- .macro loadsp, rb
- addruart \rb
+ .macro loadsp, rb, tmp
+ addruart \rb, \tmp
.endm
#endif
#endif
@@ -1017,7 +1025,7 @@
strb r2, [r3, r1]
b 1b
-puts: loadsp r3
+puts: loadsp r3, r1
1: ldrb r2, [r0], #1
teq r2, #0
moveq pc, lr
@@ -1034,7 +1042,7 @@
putc:
mov r2, r0
mov r0, #0
- loadsp r3
+ loadsp r3, r1
b 2b
memdump: mov r12, r0
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 4c663fb..d32bc71 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -53,6 +53,18 @@
asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
}
+
+#elif defined(CONFIG_CPU_V7)
+
+static void icedcc_putc(int ch)
+{
+ asm(
+ "wait: mrc p14, 0, pc, c0, c1, 0 \n\
+ bcs wait \n\
+ mcr p14, 0, %0, c0, c5, 0 "
+ : : "r" (ch));
+}
+
#elif defined(CONFIG_CPU_XSCALE)
static void icedcc_putc(int ch)
@@ -88,7 +100,6 @@
#endif
#define putc(ch) icedcc_putc(ch)
-#define flush() do { } while (0)
#endif
static void putstr(const char *ptr)
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index cc32c1e..cc0a932 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -277,7 +277,7 @@
* We don't need to sync the DMA buffer since
* it was allocated via the coherent allocators.
*/
- dma_cache_maint(ptr, size, dir);
+ __dma_single_cpu_to_dev(ptr, size, dir);
}
return dma_addr;
@@ -315,6 +315,8 @@
__cpuc_flush_dcache_area(ptr, size);
}
free_safe_buffer(dev->archdata.dmabounce, buf);
+ } else {
+ __dma_single_dev_to_cpu(dma_to_virt(dev, dma_addr), size, dir);
}
}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index f232941..1cf999a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -18,6 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
@@ -28,48 +29,6 @@
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-static void vic_ack_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
- /* moreover, clear the soft-triggered, in case it was the reason */
- writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void vic_mask_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void vic_unmask_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE);
-}
-
-/**
- * vic_init2 - common initialisation code
- * @base: Base of the VIC.
- *
- * Common initialisation code for registeration
- * and resume.
-*/
-static void vic_init2(void __iomem *base)
-{
- int i;
-
- for (i = 0; i < 16; i++) {
- void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
- writel(VIC_VECT_CNTL_ENABLE | i, reg);
- }
-
- writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-}
-
#if defined(CONFIG_PM)
/**
* struct vic_device - VIC PM device
@@ -99,13 +58,34 @@
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+static int vic_id;
+
static inline struct vic_device *to_vic(struct sys_device *sys)
{
return container_of(sys, struct vic_device, sysdev);
}
+#endif /* CONFIG_PM */
-static int vic_id;
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+ int i;
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(VIC_VECT_CNTL_ENABLE | i, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
static int vic_class_resume(struct sys_device *dev)
{
struct vic_device *vic = to_vic(dev);
@@ -159,31 +139,6 @@
};
/**
- * vic_pm_register - Register a VIC for later power management control
- * @base: The base address of the VIC.
- * @irq: The base IRQ for the VIC.
- * @resume_sources: bitmask of interrupts allowed for resume sources.
- *
- * Register the VIC with the system device tree so that it can be notified
- * of suspend and resume requests and ensure that the correct actions are
- * taken to re-instate the settings on resume.
- */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
-{
- struct vic_device *v;
-
- if (vic_id >= ARRAY_SIZE(vic_devices))
- printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
- else {
- v = &vic_devices[vic_id];
- v->base = base;
- v->resume_sources = resume_sources;
- v->irq = irq;
- vic_id++;
- }
-}
-
-/**
* vic_pm_init - initicall to register VIC pm
*
* This is called via late_initcall() to register
@@ -219,9 +174,60 @@
return 0;
}
-
late_initcall(vic_pm_init);
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+ struct vic_device *v;
+
+ if (vic_id >= ARRAY_SIZE(vic_devices))
+ printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+ else {
+ v = &vic_devices[vic_id];
+ v->base = base;
+ v->resume_sources = resume_sources;
+ v->irq = irq;
+ vic_id++;
+ }
+}
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+#endif /* CONFIG_PM */
+
+static void vic_ack_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+ /* moreover, clear the soft-triggered, in case it was the reason */
+ writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_mask_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE);
+}
+
+#if defined(CONFIG_PM)
static struct vic_device *vic_from_irq(unsigned int irq)
{
struct vic_device *v = vic_devices;
@@ -255,10 +261,7 @@
return 0;
}
-
#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-
#define vic_set_wake NULL
#endif /* CONFIG_PM */
@@ -270,80 +273,6 @@
.set_wake = vic_set_wake,
};
-/* The PL190 cell from ARM has been modified by ST, so handle both here */
-static void vik_init_st(void __iomem *base, unsigned int irq_start,
- u32 vic_sources);
-
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
- u32 vic_sources, u32 resume_sources)
-{
- unsigned int i;
- u32 cellid = 0;
- enum amba_vendor vendor;
-
- /* Identify which VIC cell this one is, by reading the ID */
- for (i = 0; i < 4; i++) {
- u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
- cellid |= (readl(addr) & 0xff) << (8 * i);
- }
- vendor = (cellid >> 12) & 0xff;
- printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
- base, cellid, vendor);
-
- switch(vendor) {
- case AMBA_VENDOR_ST:
- vik_init_st(base, irq_start, vic_sources);
- return;
- default:
- printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
- /* fall through */
- case AMBA_VENDOR_ARM:
- break;
- }
-
- /* Disable all interrupts initially. */
-
- writel(0, base + VIC_INT_SELECT);
- writel(0, base + VIC_INT_ENABLE);
- writel(~0, base + VIC_INT_ENABLE_CLEAR);
- writel(0, base + VIC_IRQ_STATUS);
- writel(0, base + VIC_ITCR);
- writel(~0, base + VIC_INT_SOFT_CLEAR);
-
- /*
- * Make sure we clear all existing interrupts
- */
- writel(0, base + VIC_PL190_VECT_ADDR);
- for (i = 0; i < 19; i++) {
- unsigned int value;
-
- value = readl(base + VIC_PL190_VECT_ADDR);
- writel(value, base + VIC_PL190_VECT_ADDR);
- }
-
- vic_init2(base);
-
- for (i = 0; i < 32; i++) {
- if (vic_sources & (1 << i)) {
- unsigned int irq = irq_start + i;
-
- set_irq_chip(irq, &vic_chip);
- set_irq_chip_data(irq, base);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
- }
-
- vic_pm_register(base, irq_start, resume_sources);
-}
-
/*
* The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
* The original cell has 32 interrupts, while the modified one has 64,
@@ -351,7 +280,7 @@
* the probe function is called twice, with base set to offset 000
* and 020 within the page. We call this "second block".
*/
-static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
u32 vic_sources)
{
unsigned int i;
@@ -400,3 +329,73 @@
}
}
}
+
+/**
+ * vic_init - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources, u32 resume_sources)
+{
+ unsigned int i;
+ u32 cellid = 0;
+ enum amba_vendor vendor;
+
+ /* Identify which VIC cell this one is, by reading the ID */
+ for (i = 0; i < 4; i++) {
+ u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+ cellid |= (readl(addr) & 0xff) << (8 * i);
+ }
+ vendor = (cellid >> 12) & 0xff;
+ printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+ base, cellid, vendor);
+
+ switch(vendor) {
+ case AMBA_VENDOR_ST:
+ vic_init_st(base, irq_start, vic_sources);
+ return;
+ default:
+ printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+ /* fall through */
+ case AMBA_VENDOR_ARM:
+ break;
+ }
+
+ /* Disable all interrupts initially. */
+
+ writel(0, base + VIC_INT_SELECT);
+ writel(0, base + VIC_INT_ENABLE);
+ writel(~0, base + VIC_INT_ENABLE_CLEAR);
+ writel(0, base + VIC_IRQ_STATUS);
+ writel(0, base + VIC_ITCR);
+ writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+ /*
+ * Make sure we clear all existing interrupts
+ */
+ writel(0, base + VIC_PL190_VECT_ADDR);
+ for (i = 0; i < 19; i++) {
+ unsigned int value;
+
+ value = readl(base + VIC_PL190_VECT_ADDR);
+ writel(value, base + VIC_PL190_VECT_ADDR);
+ }
+
+ vic_init2(base);
+
+ for (i = 0; i < 32; i++) {
+ if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+
+ vic_pm_register(base, irq_start, resume_sources);
+}
diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig
new file mode 100644
index 0000000..76d724b
--- /dev/null
+++ b/arch/arm/configs/at572d940hfek_defconfig
@@ -0,0 +1,1640 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc7
+# Fri Dec 5 10:58:47 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-AT572D940HF"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+# CONFIG_TASK_DELAY_ACCT is not set
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_ARCH_AT572D940HF=y
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT572D940HF Board Type
+#
+CONFIG_MACH_AT572D940HFEB=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_NUM_SERIAL=3
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_DEBUG_DEVICES=y
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_MTD_OOPS=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+CONFIG_MTD_PLATRAM=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_ATMEL is not set
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+CONFIG_WLAN_PRE80211=y
+CONFIG_STRIP=m
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_NEWTON=m
+CONFIG_KEYBOARD_STOWAWAY=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_BCM5974 is not set
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+CONFIG_SPECIALIX=m
+CONFIG_RIO=m
+# CONFIG_RIO_OLDPCI is not set
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_TCG_TPM=m
+CONFIG_TCG_NSC=m
+CONFIG_TCG_ATMEL=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_DS1682=m
+# CONFIG_AT24 is not set
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=m
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_PCM_OSS_PLUGINS is not set
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_AT73C213 is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=m
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+CONFIG_RTC_DRV_DS1305=y
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_CHECK=y
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+# CONFIG_UBIFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 730aefc..be8b4d7 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -182,21 +182,6 @@
* DMA Cache Coherency
* ===================
*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- * - start - virtual start address
- * - end - virtual end address
- *
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- * - start - virtual start address
- * - end - virtual end address
- *
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@@ -213,8 +198,9 @@
void (*coherent_user_range)(unsigned long, unsigned long);
void (*flush_kern_dcache_area)(void *, size_t);
- void (*dma_inv_range)(const void *, const void *);
- void (*dma_clean_range)(const void *, const void *);
+ void (*dma_map_area)(const void *, size_t, int);
+ void (*dma_unmap_area)(const void *, size_t, int);
+
void (*dma_flush_range)(const void *, const void *);
};
@@ -244,8 +230,8 @@
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_inv_range cpu_cache.dma_inv_range
-#define dmac_clean_range cpu_cache.dma_clean_range
+#define dmac_map_area cpu_cache.dma_map_area
+#define dmac_unmap_area cpu_cache.dma_unmap_area
#define dmac_flush_range cpu_cache.dma_flush_range
#else
@@ -270,12 +256,12 @@
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_inv_range __glue(_CACHE,_dma_inv_range)
-#define dmac_clean_range __glue(_CACHE,_dma_clean_range)
+#define dmac_map_area __glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-extern void dmac_inv_range(const void *, const void *);
-extern void dmac_clean_range(const void *, const void *);
+extern void dmac_map_area(const void *, size_t, int);
+extern void dmac_unmap_area(const void *, size_t, int);
extern void dmac_flush_range(const void *, const void *);
#endif
@@ -316,12 +302,8 @@
* processes address space. Really, we want to allow our "user
* space" model to handle this.
*/
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- do { \
- memcpy(dst, src, len); \
- flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
- } while (0)
-
+extern void copy_to_user_page(struct vm_area_struct *, struct page *,
+ unsigned long, void *, const void *, unsigned long);
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
do { \
memcpy(dst, src, len); \
@@ -355,17 +337,6 @@
}
}
-static inline void
-vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write)
-{
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
- unsigned long addr = (unsigned long)kaddr;
- __cpuc_coherent_kern_range(addr, addr + len);
- }
-}
-
#ifndef CONFIG_CPU_CACHE_VIPT
#define flush_cache_mm(mm) \
vivt_flush_cache_mm(mm)
@@ -373,15 +344,10 @@
vivt_flush_cache_range(vma,start,end)
#define flush_cache_page(vma,addr,pfn) \
vivt_flush_cache_page(vma,addr,pfn)
-#define flush_ptrace_access(vma,page,ua,ka,len,write) \
- vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
#else
extern void flush_cache_mm(struct mm_struct *mm);
extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
-extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write);
#endif
#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index a96300b..256ee1c 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -57,18 +57,58 @@
#endif
/*
- * DMA-consistent mapping functions. These allocate/free a region of
- * uncached, unwrite-buffered mapped memory space for use with DMA
- * devices. This is the "generic" version. The PCI specific version
- * is in pci.h
+ * The DMA API is built upon the notion of "buffer ownership". A buffer
+ * is either exclusively owned by the CPU (and therefore may be accessed
+ * by it) or exclusively owned by the DMA device. These helper functions
+ * represent the transitions between these two ownership states.
*
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ * Note, however, that on later ARMs, this notion does not work due to
+ * speculative prefetches. We model our approach on the assumption that
+ * the CPU does do speculative prefetches, which means we clean caches
+ * before transfers and delay cache invalidation until transfer completion.
+ *
+ * Private support functions: these are not part of the API and are
+ * liable to change. Drivers must not use these.
*/
-extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
-extern void dma_cache_maint_page(struct page *page, unsigned long offset,
- size_t size, int rw);
+static inline void __dma_single_cpu_to_dev(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ extern void ___dma_single_cpu_to_dev(const void *, size_t,
+ enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_single_cpu_to_dev(kaddr, size, dir);
+}
+
+static inline void __dma_single_dev_to_cpu(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ extern void ___dma_single_dev_to_cpu(const void *, size_t,
+ enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_single_dev_to_cpu(kaddr, size, dir);
+}
+
+static inline void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ extern void ___dma_page_cpu_to_dev(struct page *, unsigned long,
+ size_t, enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_page_cpu_to_dev(page, off, size, dir);
+}
+
+static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ extern void ___dma_page_dev_to_cpu(struct page *, unsigned long,
+ size_t, enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_page_dev_to_cpu(page, off, size, dir);
+}
/*
* Return whether the given device DMA address mask can be supported
@@ -304,8 +344,7 @@
{
BUG_ON(!valid_dma_direction(dir));
- if (!arch_is_coherent())
- dma_cache_maint(cpu_addr, size, dir);
+ __dma_single_cpu_to_dev(cpu_addr, size, dir);
return virt_to_dma(dev, cpu_addr);
}
@@ -329,8 +368,7 @@
{
BUG_ON(!valid_dma_direction(dir));
- if (!arch_is_coherent())
- dma_cache_maint_page(page, offset, size, dir);
+ __dma_page_cpu_to_dev(page, offset, size, dir);
return page_to_dma(dev, page) + offset;
}
@@ -352,7 +390,7 @@
static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
- /* nothing to do */
+ __dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
}
/**
@@ -372,7 +410,8 @@
static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
- /* nothing to do */
+ __dma_page_dev_to_cpu(dma_to_page(dev, handle), handle & ~PAGE_MASK,
+ size, dir);
}
#endif /* CONFIG_DMABOUNCE */
@@ -400,7 +439,10 @@
{
BUG_ON(!valid_dma_direction(dir));
- dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
+ if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir))
+ return;
+
+ __dma_single_dev_to_cpu(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
@@ -412,8 +454,7 @@
if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
return;
- if (!arch_is_coherent())
- dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+ __dma_single_cpu_to_dev(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_for_cpu(struct device *dev,
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 3a32af4..a485ac3 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -117,11 +117,12 @@
#endif
struct page;
+struct vm_area_struct;
struct cpu_user_fns {
void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr);
void (*cpu_copy_user_highpage)(struct page *to, struct page *from,
- unsigned long vaddr);
+ unsigned long vaddr, struct vm_area_struct *vma);
};
#ifdef MULTI_USER
@@ -137,7 +138,7 @@
extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr);
extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr);
+ unsigned long vaddr, struct vm_area_struct *vma);
#endif
#define clear_user_highpage(page,vaddr) \
@@ -145,7 +146,7 @@
#define __HAVE_ARCH_COPY_USER_HIGHPAGE
#define copy_user_highpage(to,from,vaddr,vma) \
- __cpu_copy_user_highpage(to, from, vaddr)
+ __cpu_copy_user_highpage(to, from, vaddr, vma)
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
new file mode 100644
index 0000000..49e3049
--- /dev/null
+++ b/arch/arm/include/asm/perf_event.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/include/asm/perf_event.h
+ *
+ * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARM_PERF_EVENT_H__
+#define __ARM_PERF_EVENT_H__
+
+/*
+ * NOP: on *most* (read: all supported) ARM platforms, the performance
+ * counter interrupts are regular interrupts and not an NMI. This
+ * means that when we receive the interrupt we can call
+ * perf_event_do_pending() that handles all of the work with
+ * interrupts enabled.
+ */
+static inline void
+set_perf_event_pending(void)
+{
+}
+
+/* ARM performance counters start from 1 (in the cp15 accesses) so use the
+ * same indexes here for consistency. */
+#define PERF_EVENT_INDEX_OFFSET 1
+
+#endif /* __ARM_PERF_EVENT_H__ */
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
new file mode 100644
index 0000000..2829b9f
--- /dev/null
+++ b/arch/arm/include/asm/pmu.h
@@ -0,0 +1,75 @@
+/*
+ * linux/arch/arm/include/asm/pmu.h
+ *
+ * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARM_PMU_H__
+#define __ARM_PMU_H__
+
+#ifdef CONFIG_CPU_HAS_PMU
+
+struct pmu_irqs {
+ const int *irqs;
+ int num_irqs;
+};
+
+/**
+ * reserve_pmu() - reserve the hardware performance counters
+ *
+ * Reserve the hardware performance counters in the system for exclusive use.
+ * The 'struct pmu_irqs' for the system is returned on success, ERR_PTR()
+ * encoded error on failure.
+ */
+extern const struct pmu_irqs *
+reserve_pmu(void);
+
+/**
+ * release_pmu() - Relinquish control of the performance counters
+ *
+ * Release the performance counters and allow someone else to use them.
+ * Callers must have disabled the counters and released IRQs before calling
+ * this. The 'struct pmu_irqs' returned from reserve_pmu() must be passed as
+ * a cookie.
+ */
+extern int
+release_pmu(const struct pmu_irqs *irqs);
+
+/**
+ * init_pmu() - Initialise the PMU.
+ *
+ * Initialise the system ready for PMU enabling. This should typically set the
+ * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
+ * the actual hardware initialisation.
+ */
+extern int
+init_pmu(void);
+
+#else /* CONFIG_CPU_HAS_PMU */
+
+static inline const struct pmu_irqs *
+reserve_pmu(void)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+static inline int
+release_pmu(const struct pmu_irqs *irqs)
+{
+ return -ENODEV;
+}
+
+static inline int
+init_pmu(void)
+{
+ return -ENODEV;
+}
+
+#endif /* CONFIG_CPU_HAS_PMU */
+
+#endif /* __ARM_PMU_H__ */
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index 59303e2..e621530 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -13,4 +13,9 @@
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
}
+static inline int cache_ops_need_broadcast(void)
+{
+ return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
+}
+
#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index c2f1605..e085e2c 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -529,7 +529,8 @@
* cache entries for the kernels virtual memory range are written
* back to the page.
*/
-extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
+extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep);
#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index eb0284c..26d302c 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -47,6 +47,8 @@
obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o
obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
+obj-$(CONFIG_CPU_HAS_PMU) += pmu.o
+obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
ifneq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 4a88125..8835115 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -12,6 +12,7 @@
*/
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
@@ -112,5 +113,9 @@
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
#endif
+ BLANK();
+ DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
+ DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
+ DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
return 0;
}
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index b121b60..a38b487 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -24,7 +24,7 @@
#if defined(CONFIG_CPU_V6)
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -49,9 +49,29 @@
1002:
.endm
+#elif defined(CONFIG_CPU_V7)
+
+ .macro addruart, rx, tmp
+ .endm
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c0, c5, 0
+ .endm
+
+ .macro busyuart, rd, rx
+busy: mrc p14, 0, pc, c0, c1, 0
+ bcs busy
+ .endm
+
+ .macro waituart, rd, rx
+wait: mrc p14, 0, pc, c0, c1, 0
+ bcs wait
+
+ .endm
+
#elif defined(CONFIG_CPU_XSCALE)
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -78,7 +98,7 @@
#else
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -144,7 +164,7 @@
.ltorg
ENTRY(printascii)
- addruart r3
+ addruart r3, r1
b 2f
1: waituart r2, r3
senduart r1, r3
@@ -160,7 +180,7 @@
ENDPROC(printascii)
ENTRY(printch)
- addruart r3
+ addruart r3, r1
mov r1, r0
mov r0, #0
b 1b
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index 950391f..d4a0da1 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -78,15 +78,6 @@
return 1;
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
- /*
- * If we have support for OABI programs, we can never allow NX
- * support - our signal syscall restart mechanism relies upon
- * being able to execute code placed on the user stack.
- */
- return 1;
-#else
return 0;
-#endif
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
new file mode 100644
index 0000000..c54ceb3
--- /dev/null
+++ b/arch/arm/kernel/perf_event.c
@@ -0,0 +1,2276 @@
+#undef DEBUG
+
+/*
+ * ARM performance counter support.
+ *
+ * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
+ *
+ * ARMv7 support: Jean Pihet <jpihet@mvista.com>
+ * 2010 (c) MontaVista Software, LLC.
+ *
+ * This code is based on the sparc64 perf event code, which is in turn based
+ * on the x86 code. Callchain code is based on the ARM OProfile backtrace
+ * code.
+ */
+#define pr_fmt(fmt) "hw perfevents: " fmt
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <asm/cputype.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
+#include <asm/stacktrace.h>
+
+static const struct pmu_irqs *pmu_irqs;
+
+/*
+ * Hardware lock to serialize accesses to PMU registers. Needed for the
+ * read/modify/write sequences.
+ */
+DEFINE_SPINLOCK(pmu_lock);
+
+/*
+ * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
+ * another platform that supports more, we need to increase this to be the
+ * largest of all platforms.
+ *
+ * ARMv7 supports up to 32 events:
+ * cycle counter CCNT + 31 events counters CNT0..30.
+ * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
+ */
+#define ARMPMU_MAX_HWEVENTS 33
+
+/* The events for a given CPU. */
+struct cpu_hw_events {
+ /*
+ * The events that are active on the CPU for the given index. Index 0
+ * is reserved.
+ */
+ struct perf_event *events[ARMPMU_MAX_HWEVENTS];
+
+ /*
+ * A 1 bit for an index indicates that the counter is being used for
+ * an event. A 0 means that the counter can be used.
+ */
+ unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
+
+ /*
+ * A 1 bit for an index indicates that the counter is actively being
+ * used.
+ */
+ unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+struct arm_pmu {
+ char *name;
+ irqreturn_t (*handle_irq)(int irq_num, void *dev);
+ void (*enable)(struct hw_perf_event *evt, int idx);
+ void (*disable)(struct hw_perf_event *evt, int idx);
+ int (*event_map)(int evt);
+ u64 (*raw_event)(u64);
+ int (*get_event_idx)(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *hwc);
+ u32 (*read_counter)(int idx);
+ void (*write_counter)(int idx, u32 val);
+ void (*start)(void);
+ void (*stop)(void);
+ int num_events;
+ u64 max_period;
+};
+
+/* Set at runtime when we know what CPU type we are. */
+static const struct arm_pmu *armpmu;
+
+#define HW_OP_UNSUPPORTED 0xFFFF
+
+#define C(_x) \
+ PERF_COUNT_HW_CACHE_##_x
+
+#define CACHE_OP_UNSUPPORTED 0xFFFF
+
+static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX];
+
+static int
+armpmu_map_cache_event(u64 config)
+{
+ unsigned int cache_type, cache_op, cache_result, ret;
+
+ cache_type = (config >> 0) & 0xff;
+ if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+ return -EINVAL;
+
+ cache_op = (config >> 8) & 0xff;
+ if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+ return -EINVAL;
+
+ cache_result = (config >> 16) & 0xff;
+ if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+ return -EINVAL;
+
+ ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result];
+
+ if (ret == CACHE_OP_UNSUPPORTED)
+ return -ENOENT;
+
+ return ret;
+}
+
+static int
+armpmu_event_set_period(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx)
+{
+ s64 left = atomic64_read(&hwc->period_left);
+ s64 period = hwc->sample_period;
+ int ret = 0;
+
+ if (unlikely(left <= -period)) {
+ left = period;
+ atomic64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ }
+
+ if (unlikely(left <= 0)) {
+ left += period;
+ atomic64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ }
+
+ if (left > (s64)armpmu->max_period)
+ left = armpmu->max_period;
+
+ atomic64_set(&hwc->prev_count, (u64)-left);
+
+ armpmu->write_counter(idx, (u64)(-left) & 0xffffffff);
+
+ perf_event_update_userpage(event);
+
+ return ret;
+}
+
+static u64
+armpmu_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx)
+{
+ int shift = 64 - 32;
+ s64 prev_raw_count, new_raw_count;
+ s64 delta;
+
+again:
+ prev_raw_count = atomic64_read(&hwc->prev_count);
+ new_raw_count = armpmu->read_counter(idx);
+
+ if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count)
+ goto again;
+
+ delta = (new_raw_count << shift) - (prev_raw_count << shift);
+ delta >>= shift;
+
+ atomic64_add(delta, &event->count);
+ atomic64_sub(delta, &hwc->period_left);
+
+ return new_raw_count;
+}
+
+static void
+armpmu_disable(struct perf_event *event)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
+
+ WARN_ON(idx < 0);
+
+ clear_bit(idx, cpuc->active_mask);
+ armpmu->disable(hwc, idx);
+
+ barrier();
+
+ armpmu_event_update(event, hwc, idx);
+ cpuc->events[idx] = NULL;
+ clear_bit(idx, cpuc->used_mask);
+
+ perf_event_update_userpage(event);
+}
+
+static void
+armpmu_read(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ /* Don't read disabled counters! */
+ if (hwc->idx < 0)
+ return;
+
+ armpmu_event_update(event, hwc, hwc->idx);
+}
+
+static void
+armpmu_unthrottle(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ /*
+ * Set the period again. Some counters can't be stopped, so when we
+ * were throttled we simply disabled the IRQ source and the counter
+ * may have been left counting. If we don't do this step then we may
+ * get an interrupt too soon or *way* too late if the overflow has
+ * happened since disabling.
+ */
+ armpmu_event_set_period(event, hwc, hwc->idx);
+ armpmu->enable(hwc, hwc->idx);
+}
+
+static int
+armpmu_enable(struct perf_event *event)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx;
+ int err = 0;
+
+ /* If we don't have a space for the counter then finish early. */
+ idx = armpmu->get_event_idx(cpuc, hwc);
+ if (idx < 0) {
+ err = idx;
+ goto out;
+ }
+
+ /*
+ * If there is an event in the counter we are going to use then make
+ * sure it is disabled.
+ */
+ event->hw.idx = idx;
+ armpmu->disable(hwc, idx);
+ cpuc->events[idx] = event;
+ set_bit(idx, cpuc->active_mask);
+
+ /* Set the period for the event. */
+ armpmu_event_set_period(event, hwc, idx);
+
+ /* Enable the event. */
+ armpmu->enable(hwc, idx);
+
+ /* Propagate our changes to the userspace mapping. */
+ perf_event_update_userpage(event);
+
+out:
+ return err;
+}
+
+static struct pmu pmu = {
+ .enable = armpmu_enable,
+ .disable = armpmu_disable,
+ .unthrottle = armpmu_unthrottle,
+ .read = armpmu_read,
+};
+
+static int
+validate_event(struct cpu_hw_events *cpuc,
+ struct perf_event *event)
+{
+ struct hw_perf_event fake_event = event->hw;
+
+ if (event->pmu && event->pmu != &pmu)
+ return 0;
+
+ return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
+}
+
+static int
+validate_group(struct perf_event *event)
+{
+ struct perf_event *sibling, *leader = event->group_leader;
+ struct cpu_hw_events fake_pmu;
+
+ memset(&fake_pmu, 0, sizeof(fake_pmu));
+
+ if (!validate_event(&fake_pmu, leader))
+ return -ENOSPC;
+
+ list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+ if (!validate_event(&fake_pmu, sibling))
+ return -ENOSPC;
+ }
+
+ if (!validate_event(&fake_pmu, event))
+ return -ENOSPC;
+
+ return 0;
+}
+
+static int
+armpmu_reserve_hardware(void)
+{
+ int i;
+ int err;
+
+ pmu_irqs = reserve_pmu();
+ if (IS_ERR(pmu_irqs)) {
+ pr_warning("unable to reserve pmu\n");
+ return PTR_ERR(pmu_irqs);
+ }
+
+ init_pmu();
+
+ if (pmu_irqs->num_irqs < 1) {
+ pr_err("no irqs for PMUs defined\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < pmu_irqs->num_irqs; ++i) {
+ err = request_irq(pmu_irqs->irqs[i], armpmu->handle_irq,
+ IRQF_DISABLED, "armpmu", NULL);
+ if (err) {
+ pr_warning("unable to request IRQ%d for ARM "
+ "perf counters\n", pmu_irqs->irqs[i]);
+ break;
+ }
+ }
+
+ if (err) {
+ for (i = i - 1; i >= 0; --i)
+ free_irq(pmu_irqs->irqs[i], NULL);
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
+ }
+
+ return err;
+}
+
+static void
+armpmu_release_hardware(void)
+{
+ int i;
+
+ for (i = pmu_irqs->num_irqs - 1; i >= 0; --i)
+ free_irq(pmu_irqs->irqs[i], NULL);
+ armpmu->stop();
+
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
+}
+
+static atomic_t active_events = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmu_reserve_mutex);
+
+static void
+hw_perf_event_destroy(struct perf_event *event)
+{
+ if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) {
+ armpmu_release_hardware();
+ mutex_unlock(&pmu_reserve_mutex);
+ }
+}
+
+static int
+__hw_perf_event_init(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ int mapping, err;
+
+ /* Decode the generic type into an ARM event identifier. */
+ if (PERF_TYPE_HARDWARE == event->attr.type) {
+ mapping = armpmu->event_map(event->attr.config);
+ } else if (PERF_TYPE_HW_CACHE == event->attr.type) {
+ mapping = armpmu_map_cache_event(event->attr.config);
+ } else if (PERF_TYPE_RAW == event->attr.type) {
+ mapping = armpmu->raw_event(event->attr.config);
+ } else {
+ pr_debug("event type %x not supported\n", event->attr.type);
+ return -EOPNOTSUPP;
+ }
+
+ if (mapping < 0) {
+ pr_debug("event %x:%llx not supported\n", event->attr.type,
+ event->attr.config);
+ return mapping;
+ }
+
+ /*
+ * Check whether we need to exclude the counter from certain modes.
+ * The ARM performance counters are on all of the time so if someone
+ * has asked us for some excludes then we have to fail.
+ */
+ if (event->attr.exclude_kernel || event->attr.exclude_user ||
+ event->attr.exclude_hv || event->attr.exclude_idle) {
+ pr_debug("ARM performance counters do not support "
+ "mode exclusion\n");
+ return -EPERM;
+ }
+
+ /*
+ * We don't assign an index until we actually place the event onto
+ * hardware. Use -1 to signify that we haven't decided where to put it
+ * yet. For SMP systems, each core has it's own PMU so we can't do any
+ * clever allocation or constraints checking at this point.
+ */
+ hwc->idx = -1;
+
+ /*
+ * Store the event encoding into the config_base field. config and
+ * event_base are unused as the only 2 things we need to know are
+ * the event mapping and the counter to use. The counter to use is
+ * also the indx and the config_base is the event type.
+ */
+ hwc->config_base = (unsigned long)mapping;
+ hwc->config = 0;
+ hwc->event_base = 0;
+
+ if (!hwc->sample_period) {
+ hwc->sample_period = armpmu->max_period;
+ hwc->last_period = hwc->sample_period;
+ atomic64_set(&hwc->period_left, hwc->sample_period);
+ }
+
+ err = 0;
+ if (event->group_leader != event) {
+ err = validate_group(event);
+ if (err)
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+const struct pmu *
+hw_perf_event_init(struct perf_event *event)
+{
+ int err = 0;
+
+ if (!armpmu)
+ return ERR_PTR(-ENODEV);
+
+ event->destroy = hw_perf_event_destroy;
+
+ if (!atomic_inc_not_zero(&active_events)) {
+ if (atomic_read(&active_events) > perf_max_events) {
+ atomic_dec(&active_events);
+ return ERR_PTR(-ENOSPC);
+ }
+
+ mutex_lock(&pmu_reserve_mutex);
+ if (atomic_read(&active_events) == 0) {
+ err = armpmu_reserve_hardware();
+ }
+
+ if (!err)
+ atomic_inc(&active_events);
+ mutex_unlock(&pmu_reserve_mutex);
+ }
+
+ if (err)
+ return ERR_PTR(err);
+
+ err = __hw_perf_event_init(event);
+ if (err)
+ hw_perf_event_destroy(event);
+
+ return err ? ERR_PTR(err) : &pmu;
+}
+
+void
+hw_perf_enable(void)
+{
+ /* Enable all of the perf events on hardware. */
+ int idx;
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+ if (!armpmu)
+ return;
+
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+
+ if (!event)
+ continue;
+
+ armpmu->enable(&event->hw, idx);
+ }
+
+ armpmu->start();
+}
+
+void
+hw_perf_disable(void)
+{
+ if (armpmu)
+ armpmu->stop();
+}
+
+/*
+ * ARMv6 Performance counter handling code.
+ *
+ * ARMv6 has 2 configurable performance counters and a single cycle counter.
+ * They all share a single reset bit but can be written to zero so we can use
+ * that for a reset.
+ *
+ * The counters can't be individually enabled or disabled so when we remove
+ * one event and replace it with another we could get spurious counts from the
+ * wrong event. However, we can take advantage of the fact that the
+ * performance counters can export events to the event bus, and the event bus
+ * itself can be monitored. This requires that we *don't* export the events to
+ * the event bus. The procedure for disabling a configurable counter is:
+ * - change the counter to count the ETMEXTOUT[0] signal (0x20). This
+ * effectively stops the counter from counting.
+ * - disable the counter's interrupt generation (each counter has it's
+ * own interrupt enable bit).
+ * Once stopped, the counter value can be written as 0 to reset.
+ *
+ * To enable a counter:
+ * - enable the counter's interrupt generation.
+ * - set the new event type.
+ *
+ * Note: the dedicated cycle counter only counts cycles and can't be
+ * enabled/disabled independently of the others. When we want to disable the
+ * cycle counter, we have to just disable the interrupt reporting and start
+ * ignoring that counter. When re-enabling, we have to reset the value and
+ * enable the interrupt.
+ */
+
+enum armv6_perf_types {
+ ARMV6_PERFCTR_ICACHE_MISS = 0x0,
+ ARMV6_PERFCTR_IBUF_STALL = 0x1,
+ ARMV6_PERFCTR_DDEP_STALL = 0x2,
+ ARMV6_PERFCTR_ITLB_MISS = 0x3,
+ ARMV6_PERFCTR_DTLB_MISS = 0x4,
+ ARMV6_PERFCTR_BR_EXEC = 0x5,
+ ARMV6_PERFCTR_BR_MISPREDICT = 0x6,
+ ARMV6_PERFCTR_INSTR_EXEC = 0x7,
+ ARMV6_PERFCTR_DCACHE_HIT = 0x9,
+ ARMV6_PERFCTR_DCACHE_ACCESS = 0xA,
+ ARMV6_PERFCTR_DCACHE_MISS = 0xB,
+ ARMV6_PERFCTR_DCACHE_WBACK = 0xC,
+ ARMV6_PERFCTR_SW_PC_CHANGE = 0xD,
+ ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF,
+ ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10,
+ ARMV6_PERFCTR_LSU_FULL_STALL = 0x11,
+ ARMV6_PERFCTR_WBUF_DRAINED = 0x12,
+ ARMV6_PERFCTR_CPU_CYCLES = 0xFF,
+ ARMV6_PERFCTR_NOP = 0x20,
+};
+
+enum armv6_counters {
+ ARMV6_CYCLE_COUNTER = 1,
+ ARMV6_COUNTER0,
+ ARMV6_COUNTER1,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * The ARM performance counters can count micro DTLB misses,
+ * micro ITLB misses and main TLB misses. There isn't an event
+ * for TLB misses, so use the micro misses here and if users
+ * want the main TLB misses they can use a raw counter.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+enum armv6mpcore_perf_types {
+ ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0,
+ ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1,
+ ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2,
+ ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3,
+ ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4,
+ ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5,
+ ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6,
+ ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7,
+ ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8,
+ ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
+ ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB,
+ ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
+ ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD,
+ ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
+ ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF,
+ ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10,
+ ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
+ ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12,
+ ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13,
+ ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
+ [C(RESULT_MISS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
+ [C(RESULT_MISS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * The ARM performance counters can count micro DTLB misses,
+ * micro ITLB misses and main TLB misses. There isn't an event
+ * for TLB misses, so use the micro misses here and if users
+ * want the main TLB misses they can use a raw counter.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+static inline unsigned long
+armv6_pmcr_read(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val));
+ return val;
+}
+
+static inline void
+armv6_pmcr_write(unsigned long val)
+{
+ asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val));
+}
+
+#define ARMV6_PMCR_ENABLE (1 << 0)
+#define ARMV6_PMCR_CTR01_RESET (1 << 1)
+#define ARMV6_PMCR_CCOUNT_RESET (1 << 2)
+#define ARMV6_PMCR_CCOUNT_DIV (1 << 3)
+#define ARMV6_PMCR_COUNT0_IEN (1 << 4)
+#define ARMV6_PMCR_COUNT1_IEN (1 << 5)
+#define ARMV6_PMCR_CCOUNT_IEN (1 << 6)
+#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8)
+#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9)
+#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10)
+#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20
+#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
+#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12
+#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
+
+#define ARMV6_PMCR_OVERFLOWED_MASK \
+ (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
+ ARMV6_PMCR_CCOUNT_OVERFLOW)
+
+static inline int
+armv6_pmcr_has_overflowed(unsigned long pmcr)
+{
+ return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK);
+}
+
+static inline int
+armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
+ enum armv6_counters counter)
+{
+ int ret = 0;
+
+ if (ARMV6_CYCLE_COUNTER == counter)
+ ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
+ else if (ARMV6_COUNTER0 == counter)
+ ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
+ else if (ARMV6_COUNTER1 == counter)
+ ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+ return ret;
+}
+
+static inline u32
+armv6pmu_read_counter(int counter)
+{
+ unsigned long value = 0;
+
+ if (ARMV6_CYCLE_COUNTER == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value));
+ else if (ARMV6_COUNTER0 == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value));
+ else if (ARMV6_COUNTER1 == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value));
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+ return value;
+}
+
+static inline void
+armv6pmu_write_counter(int counter,
+ u32 value)
+{
+ if (ARMV6_CYCLE_COUNTER == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value));
+ else if (ARMV6_COUNTER0 == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value));
+ else if (ARMV6_COUNTER1 == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value));
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+}
+
+void
+armv6pmu_enable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = 0;
+ evt = ARMV6_PMCR_CCOUNT_IEN;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_EVT_COUNT0_MASK;
+ evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
+ ARMV6_PMCR_COUNT0_IEN;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_EVT_COUNT1_MASK;
+ evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
+ ARMV6_PMCR_COUNT1_IEN;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Mask out the current event and set the counter to count the event
+ * that we're interested in.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t
+armv6pmu_handle_irq(int irq_num,
+ void *dev)
+{
+ unsigned long pmcr = armv6_pmcr_read();
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ if (!armv6_pmcr_has_overflowed(pmcr))
+ return IRQ_NONE;
+
+ regs = get_irq_regs();
+
+ /*
+ * The interrupts are cleared by writing the overflow flags back to
+ * the control register. All of the other bits don't have any effect
+ * if they are rewritten, so write the whole value back.
+ */
+ armv6_pmcr_write(pmcr);
+
+ data.addr = 0;
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ /*
+ * We have a single interrupt for all counters. Check that
+ * each counter has overflowed before we process it.
+ */
+ if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ /*
+ * Handle the pending perf events.
+ *
+ * Note: this call *must* be run with interrupts enabled. For
+ * platforms that can have the PMU interrupts raised as a PMI, this
+ * will not work.
+ */
+ perf_event_do_pending();
+
+ return IRQ_HANDLED;
+}
+
+static void
+armv6pmu_start(void)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val |= ARMV6_PMCR_ENABLE;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+void
+armv6pmu_stop(void)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~ARMV6_PMCR_ENABLE;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline int
+armv6pmu_event_map(int config)
+{
+ int mapping = armv6_perf_map[config];
+ if (HW_OP_UNSUPPORTED == mapping)
+ mapping = -EOPNOTSUPP;
+ return mapping;
+}
+
+static inline int
+armv6mpcore_pmu_event_map(int config)
+{
+ int mapping = armv6mpcore_perf_map[config];
+ if (HW_OP_UNSUPPORTED == mapping)
+ mapping = -EOPNOTSUPP;
+ return mapping;
+}
+
+static u64
+armv6pmu_raw_event(u64 config)
+{
+ return config & 0xff;
+}
+
+static int
+armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ /* Always place a cycle counter into the cycle counter. */
+ if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
+ if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return ARMV6_CYCLE_COUNTER;
+ } else {
+ /*
+ * For anything other than a cycle counter, try and use
+ * counter0 and counter1.
+ */
+ if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) {
+ return ARMV6_COUNTER1;
+ }
+
+ if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) {
+ return ARMV6_COUNTER0;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+ }
+}
+
+static void
+armv6pmu_disable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ evt = 0;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
+ evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
+ evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Mask out the current event and set the counter to count the number
+ * of ETM bus signal assertion cycles. The external reporting should
+ * be disabled and so this should never increment.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, flags, evt = 0;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_COUNT0_IEN;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_COUNT1_IEN;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Unlike UP ARMv6, we don't have a way of stopping the counters. We
+ * simply disable the interrupt reporting.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static const struct arm_pmu armv6pmu = {
+ .name = "v6",
+ .handle_irq = armv6pmu_handle_irq,
+ .enable = armv6pmu_enable_event,
+ .disable = armv6pmu_disable_event,
+ .event_map = armv6pmu_event_map,
+ .raw_event = armv6pmu_raw_event,
+ .read_counter = armv6pmu_read_counter,
+ .write_counter = armv6pmu_write_counter,
+ .get_event_idx = armv6pmu_get_event_idx,
+ .start = armv6pmu_start,
+ .stop = armv6pmu_stop,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+/*
+ * ARMv6mpcore is almost identical to single core ARMv6 with the exception
+ * that some of the events have different enumerations and that there is no
+ * *hack* to stop the programmable counters. To stop the counters we simply
+ * disable the interrupt reporting and update the event. When unthrottling we
+ * reset the period and enable the interrupt reporting.
+ */
+static const struct arm_pmu armv6mpcore_pmu = {
+ .name = "v6mpcore",
+ .handle_irq = armv6pmu_handle_irq,
+ .enable = armv6pmu_enable_event,
+ .disable = armv6mpcore_pmu_disable_event,
+ .event_map = armv6mpcore_pmu_event_map,
+ .raw_event = armv6pmu_raw_event,
+ .read_counter = armv6pmu_read_counter,
+ .write_counter = armv6pmu_write_counter,
+ .get_event_idx = armv6pmu_get_event_idx,
+ .start = armv6pmu_start,
+ .stop = armv6pmu_stop,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+/*
+ * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
+ *
+ * Copied from ARMv6 code, with the low level code inspired
+ * by the ARMv7 Oprofile code.
+ *
+ * Cortex-A8 has up to 4 configurable performance counters and
+ * a single cycle counter.
+ * Cortex-A9 has up to 31 configurable performance counters and
+ * a single cycle counter.
+ *
+ * All counters can be enabled/disabled and IRQ masked separately. The cycle
+ * counter and all 4 performance counters together can be reset separately.
+ */
+
+#define ARMV7_PMU_CORTEX_A8_NAME "ARMv7 Cortex-A8"
+
+#define ARMV7_PMU_CORTEX_A9_NAME "ARMv7 Cortex-A9"
+
+/* Common ARMv7 event types */
+enum armv7_perf_types {
+ ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
+ ARMV7_PERFCTR_IFETCH_MISS = 0x01,
+ ARMV7_PERFCTR_ITLB_MISS = 0x02,
+ ARMV7_PERFCTR_DCACHE_REFILL = 0x03,
+ ARMV7_PERFCTR_DCACHE_ACCESS = 0x04,
+ ARMV7_PERFCTR_DTLB_REFILL = 0x05,
+ ARMV7_PERFCTR_DREAD = 0x06,
+ ARMV7_PERFCTR_DWRITE = 0x07,
+
+ ARMV7_PERFCTR_EXC_TAKEN = 0x09,
+ ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
+ ARMV7_PERFCTR_CID_WRITE = 0x0B,
+ /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+ * It counts:
+ * - all branch instructions,
+ * - instructions that explicitly write the PC,
+ * - exception generating instructions.
+ */
+ ARMV7_PERFCTR_PC_WRITE = 0x0C,
+ ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
+ ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F,
+ ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
+ ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
+
+ ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12,
+
+ ARMV7_PERFCTR_CPU_CYCLES = 0xFF
+};
+
+/* ARMv7 Cortex-A8 specific event types */
+enum armv7_a8_perf_types {
+ ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
+
+ ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
+
+ ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40,
+ ARMV7_PERFCTR_L2_STORE_MERGED = 0x41,
+ ARMV7_PERFCTR_L2_STORE_BUFF = 0x42,
+ ARMV7_PERFCTR_L2_ACCESS = 0x43,
+ ARMV7_PERFCTR_L2_CACH_MISS = 0x44,
+ ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45,
+ ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46,
+ ARMV7_PERFCTR_MEMORY_REPLAY = 0x47,
+ ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48,
+ ARMV7_PERFCTR_L1_DATA_MISS = 0x49,
+ ARMV7_PERFCTR_L1_INST_MISS = 0x4A,
+ ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B,
+ ARMV7_PERFCTR_L1_NEON_DATA = 0x4C,
+ ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D,
+ ARMV7_PERFCTR_L2_NEON = 0x4E,
+ ARMV7_PERFCTR_L2_NEON_HIT = 0x4F,
+ ARMV7_PERFCTR_L1_INST = 0x50,
+ ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51,
+ ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52,
+ ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53,
+ ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54,
+ ARMV7_PERFCTR_OP_EXECUTED = 0x55,
+ ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56,
+ ARMV7_PERFCTR_CYCLES_INST = 0x57,
+ ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58,
+ ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59,
+ ARMV7_PERFCTR_NEON_CYCLES = 0x5A,
+
+ ARMV7_PERFCTR_PMU0_EVENTS = 0x70,
+ ARMV7_PERFCTR_PMU1_EVENTS = 0x71,
+ ARMV7_PERFCTR_PMU_EVENTS = 0x72,
+};
+
+/* ARMv7 Cortex-A9 specific event types */
+enum armv7_a9_perf_types {
+ ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40,
+ ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41,
+ ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42,
+
+ ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50,
+ ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51,
+
+ ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60,
+ ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61,
+ ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
+ ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63,
+ ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64,
+ ARMV7_PERFCTR_DATA_EVICTION = 0x65,
+ ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66,
+ ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67,
+ ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68,
+
+ ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
+
+ ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70,
+ ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
+ ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72,
+ ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73,
+ ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74,
+
+ ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
+ ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81,
+ ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82,
+ ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83,
+ ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84,
+ ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85,
+ ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86,
+
+ ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A,
+ ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
+
+ ARMV7_PERFCTR_ISB_INST = 0x90,
+ ARMV7_PERFCTR_DSB_INST = 0x91,
+ ARMV7_PERFCTR_DMB_INST = 0x92,
+ ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93,
+
+ ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0,
+ ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1,
+ ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2,
+ ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3,
+ ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4,
+ ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5
+};
+
+/*
+ * Cortex-A8 HW events mapping
+ *
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * Only ITLB misses and DTLB refills are supported.
+ * If users want the DTLB refills misses a raw counter
+ * must be used.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+/*
+ * Cortex-A9 HW events mapping
+ */
+static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] =
+ ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * Only ITLB misses and DTLB refills are supported.
+ * If users want the DTLB refills misses a raw counter
+ * must be used.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+/*
+ * Perf Events counters
+ */
+enum armv7_counters {
+ ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
+ ARMV7_COUNTER0 = 2, /* First event counter */
+};
+
+/*
+ * The cycle counter is ARMV7_CYCLE_COUNTER.
+ * The first event counter is ARMV7_COUNTER0.
+ * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
+ */
+#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
+
+/*
+ * ARMv7 low level PMNC access
+ */
+
+/*
+ * Per-CPU PMNC: config reg
+ */
+#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
+#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */
+#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */
+#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */
+#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */
+#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/
+#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */
+#define ARMV7_PMNC_N_MASK 0x1f
+#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
+
+/*
+ * Available counters
+ */
+#define ARMV7_CNT0 0 /* First event counter */
+#define ARMV7_CCNT 31 /* Cycle counter */
+
+/* Perf Event to low level counters mapping */
+#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
+
+/*
+ * CNTENS: counters enable reg
+ */
+#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
+
+/*
+ * CNTENC: counters disable reg
+ */
+#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
+
+/*
+ * INTENS: counters overflow interrupt enable reg
+ */
+#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
+
+/*
+ * INTENC: counters overflow interrupt disable reg
+ */
+#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
+
+/*
+ * EVTSEL: Event selection reg
+ */
+#define ARMV7_EVTSEL_MASK 0x7f /* Mask for writable bits */
+
+/*
+ * SELECT: Counter selection reg
+ */
+#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
+
+/*
+ * FLAG: counters overflow flag status reg
+ */
+#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
+#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
+#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
+
+static inline unsigned long armv7_pmnc_read(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
+ return val;
+}
+
+static inline void armv7_pmnc_write(unsigned long val)
+{
+ val &= ARMV7_PMNC_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
+}
+
+static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+{
+ return pmnc & ARMV7_OVERFLOWED_MASK;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
+ enum armv7_counters counter)
+{
+ int ret;
+
+ if (counter == ARMV7_CYCLE_COUNTER)
+ ret = pmnc & ARMV7_FLAG_C;
+ else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
+ ret = pmnc & ARMV7_FLAG_P(counter);
+ else
+ pr_err("CPU%u checking wrong counter %d overflow status\n",
+ smp_processor_id(), counter);
+
+ return ret;
+}
+
+static inline int armv7_pmnc_select_counter(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
+ pr_err("CPU%u selecting wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7pmu_read_counter(int idx)
+{
+ unsigned long value = 0;
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+ else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+ if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mrc p15, 0, %0, c9, c13, 2"
+ : "=r" (value));
+ } else
+ pr_err("CPU%u reading wrong counter %d\n",
+ smp_processor_id(), idx);
+
+ return value;
+}
+
+static inline void armv7pmu_write_counter(int idx, u32 value)
+{
+ if (idx == ARMV7_CYCLE_COUNTER)
+ asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+ else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+ if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mcr p15, 0, %0, c9, c13, 2"
+ : : "r" (value));
+ } else
+ pr_err("CPU%u writing wrong counter %d\n",
+ smp_processor_id(), idx);
+}
+
+static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+{
+ if (armv7_pmnc_select_counter(idx) == idx) {
+ val &= ARMV7_EVTSEL_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
+ }
+}
+
+static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u enabling wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_CNTENS_C;
+ else
+ val = ARMV7_CNTENS_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+{
+ u32 val;
+
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u disabling wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_CNTENC_C;
+ else
+ val = ARMV7_CNTENC_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u enabling wrong PMNC counter"
+ " interrupt enable %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_INTENS_C;
+ else
+ val = ARMV7_INTENS_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u disabling wrong PMNC counter"
+ " interrupt enable %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_INTENC_C;
+ else
+ val = ARMV7_INTENC_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_getreset_flags(void)
+{
+ u32 val;
+
+ /* Read */
+ asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+
+ /* Write to clear flags */
+ val &= ARMV7_FLAG_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
+
+ return val;
+}
+
+#ifdef DEBUG
+static void armv7_pmnc_dump_regs(void)
+{
+ u32 val;
+ unsigned int cnt;
+
+ printk(KERN_INFO "PMNC registers dump:\n");
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+ printk(KERN_INFO "PMNC =0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
+ printk(KERN_INFO "CNTENS=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
+ printk(KERN_INFO "INTENS=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+ printk(KERN_INFO "FLAGS =0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
+ printk(KERN_INFO "SELECT=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
+ printk(KERN_INFO "CCNT =0x%08x\n", val);
+
+ for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+ armv7_pmnc_select_counter(cnt);
+ asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
+ printk(KERN_INFO "CNT[%d] count =0x%08x\n",
+ cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
+ printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
+ cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ }
+}
+#endif
+
+void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags;
+
+ /*
+ * Enable counter and interrupt, and set the counter to count
+ * the event that we're interested in.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+
+ /*
+ * Disable counter
+ */
+ armv7_pmnc_disable_counter(idx);
+
+ /*
+ * Set event (if destined for PMNx counters)
+ * We don't need to set the event if it's a cycle count
+ */
+ if (idx != ARMV7_CYCLE_COUNTER)
+ armv7_pmnc_write_evtsel(idx, hwc->config_base);
+
+ /*
+ * Enable interrupt for this counter
+ */
+ armv7_pmnc_enable_intens(idx);
+
+ /*
+ * Enable counter
+ */
+ armv7_pmnc_enable_counter(idx);
+
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags;
+
+ /*
+ * Disable counter and interrupt
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+
+ /*
+ * Disable counter
+ */
+ armv7_pmnc_disable_counter(idx);
+
+ /*
+ * Disable interrupt for this counter
+ */
+ armv7_pmnc_disable_intens(idx);
+
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
+{
+ unsigned long pmnc;
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ /*
+ * Get and reset the IRQ flags
+ */
+ pmnc = armv7_pmnc_getreset_flags();
+
+ /*
+ * Did an overflow occur?
+ */
+ if (!armv7_pmnc_has_overflowed(pmnc))
+ return IRQ_NONE;
+
+ /*
+ * Handle the counter(s) overflow(s)
+ */
+ regs = get_irq_regs();
+
+ data.addr = 0;
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ /*
+ * We have a single interrupt for all counters. Check that
+ * each counter has overflowed before we process it.
+ */
+ if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ /*
+ * Handle the pending perf events.
+ *
+ * Note: this call *must* be run with interrupts enabled. For
+ * platforms that can have the PMU interrupts raised as a PMI, this
+ * will not work.
+ */
+ perf_event_do_pending();
+
+ return IRQ_HANDLED;
+}
+
+static void armv7pmu_start(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ /* Enable all counters */
+ armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_stop(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ /* Disable all counters */
+ armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline int armv7_a8_pmu_event_map(int config)
+{
+ int mapping = armv7_a8_perf_map[config];
+ if (HW_OP_UNSUPPORTED == mapping)
+ mapping = -EOPNOTSUPP;
+ return mapping;
+}
+
+static inline int armv7_a9_pmu_event_map(int config)
+{
+ int mapping = armv7_a9_perf_map[config];
+ if (HW_OP_UNSUPPORTED == mapping)
+ mapping = -EOPNOTSUPP;
+ return mapping;
+}
+
+static u64 armv7pmu_raw_event(u64 config)
+{
+ return config & 0xff;
+}
+
+static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ int idx;
+
+ /* Always place a cycle counter into the cycle counter. */
+ if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
+ if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return ARMV7_CYCLE_COUNTER;
+ } else {
+ /*
+ * For anything other than a cycle counter, try and use
+ * the events counters
+ */
+ for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
+ if (!test_and_set_bit(idx, cpuc->used_mask))
+ return idx;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+ }
+}
+
+static struct arm_pmu armv7pmu = {
+ .handle_irq = armv7pmu_handle_irq,
+ .enable = armv7pmu_enable_event,
+ .disable = armv7pmu_disable_event,
+ .raw_event = armv7pmu_raw_event,
+ .read_counter = armv7pmu_read_counter,
+ .write_counter = armv7pmu_write_counter,
+ .get_event_idx = armv7pmu_get_event_idx,
+ .start = armv7pmu_start,
+ .stop = armv7pmu_stop,
+ .max_period = (1LLU << 32) - 1,
+};
+
+static u32 __init armv7_reset_read_pmnc(void)
+{
+ u32 nb_cnt;
+
+ /* Initialize & Reset PMNC: C and P bits */
+ armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+
+ /* Read the nb of CNTx counters supported from PMNC */
+ nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
+
+ /* Add the CPU cycles counter and return */
+ return nb_cnt + 1;
+}
+
+static int __init
+init_hw_perf_events(void)
+{
+ unsigned long cpuid = read_cpuid_id();
+ unsigned long implementor = (cpuid & 0xFF000000) >> 24;
+ unsigned long part_number = (cpuid & 0xFFF0);
+
+ /* We only support ARM CPUs implemented by ARM at the moment. */
+ if (0x41 == implementor) {
+ switch (part_number) {
+ case 0xB360: /* ARM1136 */
+ case 0xB560: /* ARM1156 */
+ case 0xB760: /* ARM1176 */
+ armpmu = &armv6pmu;
+ memcpy(armpmu_perf_cache_map, armv6_perf_cache_map,
+ sizeof(armv6_perf_cache_map));
+ perf_max_events = armv6pmu.num_events;
+ break;
+ case 0xB020: /* ARM11mpcore */
+ armpmu = &armv6mpcore_pmu;
+ memcpy(armpmu_perf_cache_map,
+ armv6mpcore_perf_cache_map,
+ sizeof(armv6mpcore_perf_cache_map));
+ perf_max_events = armv6mpcore_pmu.num_events;
+ break;
+ case 0xC080: /* Cortex-A8 */
+ armv7pmu.name = ARMV7_PMU_CORTEX_A8_NAME;
+ memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map,
+ sizeof(armv7_a8_perf_cache_map));
+ armv7pmu.event_map = armv7_a8_pmu_event_map;
+ armpmu = &armv7pmu;
+
+ /* Reset PMNC and read the nb of CNTx counters
+ supported */
+ armv7pmu.num_events = armv7_reset_read_pmnc();
+ perf_max_events = armv7pmu.num_events;
+ break;
+ case 0xC090: /* Cortex-A9 */
+ armv7pmu.name = ARMV7_PMU_CORTEX_A9_NAME;
+ memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map,
+ sizeof(armv7_a9_perf_cache_map));
+ armv7pmu.event_map = armv7_a9_pmu_event_map;
+ armpmu = &armv7pmu;
+
+ /* Reset PMNC and read the nb of CNTx counters
+ supported */
+ armv7pmu.num_events = armv7_reset_read_pmnc();
+ perf_max_events = armv7pmu.num_events;
+ break;
+ default:
+ pr_info("no hardware support available\n");
+ perf_max_events = -1;
+ }
+ }
+
+ if (armpmu)
+ pr_info("enabled with %s PMU driver, %d counters available\n",
+ armpmu->name, armpmu->num_events);
+
+ return 0;
+}
+arch_initcall(init_hw_perf_events);
+
+/*
+ * Callchain handling code.
+ */
+static inline void
+callchain_store(struct perf_callchain_entry *entry,
+ u64 ip)
+{
+ if (entry->nr < PERF_MAX_STACK_DEPTH)
+ entry->ip[entry->nr++] = ip;
+}
+
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct frame_tail *)(xxx->fp)-1
+ *
+ * This code has been adapted from the ARM OProfile support.
+ */
+struct frame_tail {
+ struct frame_tail *fp;
+ unsigned long sp;
+ unsigned long lr;
+} __attribute__((packed));
+
+/*
+ * Get the return address for a single stackframe and return a pointer to the
+ * next frame tail.
+ */
+static struct frame_tail *
+user_backtrace(struct frame_tail *tail,
+ struct perf_callchain_entry *entry)
+{
+ struct frame_tail buftail;
+
+ /* Also check accessibility of one struct frame_tail beyond */
+ if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+ return NULL;
+ if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail)))
+ return NULL;
+
+ callchain_store(entry, buftail.lr);
+
+ /*
+ * Frame pointers should strictly progress back up the stack
+ * (towards higher addresses).
+ */
+ if (tail >= buftail.fp)
+ return NULL;
+
+ return buftail.fp - 1;
+}
+
+static void
+perf_callchain_user(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ struct frame_tail *tail;
+
+ callchain_store(entry, PERF_CONTEXT_USER);
+
+ if (!user_mode(regs))
+ regs = task_pt_regs(current);
+
+ tail = (struct frame_tail *)regs->ARM_fp - 1;
+
+ while (tail && !((unsigned long)tail & 0x3))
+ tail = user_backtrace(tail, entry);
+}
+
+/*
+ * Gets called by walk_stackframe() for every stackframe. This will be called
+ * whist unwinding the stackframe and is like a subroutine return so we use
+ * the PC.
+ */
+static int
+callchain_trace(struct stackframe *fr,
+ void *data)
+{
+ struct perf_callchain_entry *entry = data;
+ callchain_store(entry, fr->pc);
+ return 0;
+}
+
+static void
+perf_callchain_kernel(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ struct stackframe fr;
+
+ callchain_store(entry, PERF_CONTEXT_KERNEL);
+ fr.fp = regs->ARM_fp;
+ fr.sp = regs->ARM_sp;
+ fr.lr = regs->ARM_lr;
+ fr.pc = regs->ARM_pc;
+ walk_stackframe(&fr, callchain_trace, entry);
+}
+
+static void
+perf_do_callchain(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ int is_user;
+
+ if (!regs)
+ return;
+
+ is_user = user_mode(regs);
+
+ if (!current || !current->pid)
+ return;
+
+ if (is_user && current->state != TASK_RUNNING)
+ return;
+
+ if (!is_user)
+ perf_callchain_kernel(regs, entry);
+
+ if (current->mm)
+ perf_callchain_user(regs, entry);
+}
+
+static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
+
+struct perf_callchain_entry *
+perf_callchain(struct pt_regs *regs)
+{
+ struct perf_callchain_entry *entry = &__get_cpu_var(pmc_irq_entry);
+
+ entry->nr = 0;
+ perf_do_callchain(regs, entry);
+ return entry;
+}
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
new file mode 100644
index 0000000..a124312
--- /dev/null
+++ b/arch/arm/kernel/pmu.c
@@ -0,0 +1,103 @@
+/*
+ * linux/arch/arm/kernel/pmu.c
+ *
+ * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/pmu.h>
+
+/*
+ * Define the IRQs for the system. We could use something like a platform
+ * device but that seems fairly heavyweight for this. Also, the performance
+ * counters can't be removed or hotplugged.
+ *
+ * Ordering is important: init_pmu() will use the ordering to set the affinity
+ * to the corresponding core. e.g. the first interrupt will go to cpu 0, the
+ * second goes to cpu 1 etc.
+ */
+static const int irqs[] = {
+#if defined(CONFIG_ARCH_OMAP2)
+ 3,
+#elif defined(CONFIG_ARCH_BCMRING)
+ IRQ_PMUIRQ,
+#elif defined(CONFIG_MACH_REALVIEW_EB)
+ IRQ_EB11MP_PMU_CPU0,
+ IRQ_EB11MP_PMU_CPU1,
+ IRQ_EB11MP_PMU_CPU2,
+ IRQ_EB11MP_PMU_CPU3,
+#elif defined(CONFIG_ARCH_OMAP3)
+ INT_34XX_BENCH_MPU_EMUL,
+#elif defined(CONFIG_ARCH_IOP32X)
+ IRQ_IOP32X_CORE_PMU,
+#elif defined(CONFIG_ARCH_IOP33X)
+ IRQ_IOP33X_CORE_PMU,
+#elif defined(CONFIG_ARCH_PXA)
+ IRQ_PMU,
+#endif
+};
+
+static const struct pmu_irqs pmu_irqs = {
+ .irqs = irqs,
+ .num_irqs = ARRAY_SIZE(irqs),
+};
+
+static volatile long pmu_lock;
+
+const struct pmu_irqs *
+reserve_pmu(void)
+{
+ return test_and_set_bit_lock(0, &pmu_lock) ? ERR_PTR(-EBUSY) :
+ &pmu_irqs;
+}
+EXPORT_SYMBOL_GPL(reserve_pmu);
+
+int
+release_pmu(const struct pmu_irqs *irqs)
+{
+ if (WARN_ON(irqs != &pmu_irqs))
+ return -EINVAL;
+ clear_bit_unlock(0, &pmu_lock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(release_pmu);
+
+static int
+set_irq_affinity(int irq,
+ unsigned int cpu)
+{
+#ifdef CONFIG_SMP
+ int err = irq_set_affinity(irq, cpumask_of(cpu));
+ if (err)
+ pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+ irq, cpu);
+ return err;
+#else
+ return 0;
+#endif
+}
+
+int
+init_pmu(void)
+{
+ int i, err = 0;
+
+ for (i = 0; i < pmu_irqs.num_irqs; ++i) {
+ err = set_irq_affinity(pmu_irqs.irqs[i], i);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(init_pmu);
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
index 0b6351d..a9cac36 100644
--- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*/
#include "hardware.h"
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0b2ee95..2db43a5 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -89,6 +89,12 @@
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
+config ARCH_AT572D940HF
+ bool "AT572D940HF"
+ select CPU_ARM926T
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
config ARCH_AT91X40
bool "AT91x40"
@@ -390,6 +396,23 @@
# ----------------------------------------------------------
+if ARCH_AT572D940HF
+
+comment "AT572D940HF Board Type"
+
+config MACH_AT572D940HFEB
+ bool "AT572D940HF-EK"
+ depends on ARCH_AT572D940HF
+ select HAVE_AT91_DATAFLASH_CARD
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
+ help
+ Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
+ <http://www.atmel.com/products/diopsis/default.asp>
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91X40
comment "AT91X40 Board Type"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 709fbad..027dd57 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
@@ -69,6 +70,9 @@
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
+# AT572D940HF board-specific support
+obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o
+
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c
new file mode 100644
index 0000000..a6b9c68
--- /dev/null
+++ b/arch/arm/mach-at91/at572d940hf.c
@@ -0,0 +1,377 @@
+/*
+ * arch/arm/mach-at91/at572d940hf.c
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at572d940hf.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at572d940hf_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE),
+ .length = AT572D940HF_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc2_clk = {
+ .name = "ssc2_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc3_clk = {
+ .name = "ssc3_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can0_clk = {
+ .name = "can0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_CAN0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can1_clk = {
+ .name = "can1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_CAN1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mAgicV_clk = {
+ .name = "mAgicV_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &macb_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc_clk,
+ &udc_clk,
+ &twi0_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &ssc2_clk,
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
+ &ohci_clk,
+ &ssc3_clk,
+ &twi1_clk,
+ &can0_clk,
+ &can1_clk,
+ &mAgicV_clk,
+ /* irq0 .. irq2 */
+};
+
+/*
+ * The five programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static struct clk mAgicV_mem_clk = {
+ .name = "mAgicV_mem_clk",
+ .pmc_mask = AT91_PMC_PCK4,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 4,
+};
+
+/* HClocks */
+static struct clk hck0 = {
+ .name = "hck0",
+ .pmc_mask = AT91_PMC_HCK0,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 0,
+};
+static struct clk hck1 = {
+ .name = "hck1",
+ .pmc_mask = AT91_PMC_HCK1,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 1,
+};
+
+static void __init at572d940hf_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+ clk_register(&mAgicV_mem_clk);
+
+ clk_register(&hck0);
+ clk_register(&hck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at572d940hf_gpio[] = {
+ {
+ .id = AT572D940HF_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT572D940HF_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT572D940HF_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }
+};
+
+static void at572d940hf_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT572D940HF processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at572d940hf_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc));
+
+ at91_arch_reset = at572d940hf_reset;
+ at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1)
+ | (1 << AT572D940HF_ID_IRQ2);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at572d940hf_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at572d940hf_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C */
+ 3, /* Ethernet */
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+ 4, /* USB Device Port */
+ 0, /* Two-Wire Interface 0 */
+ 6, /* Serial Peripheral Interface 0 */
+ 6, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller 0 */
+ 5, /* Serial Synchronous Controller 1 */
+ 5, /* Serial Synchronous Controller 2 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 3, /* USB Host port */
+ 3, /* Serial Synchronous Controller 3 */
+ 0, /* Two-Wire Interface 1 */
+ 0, /* CAN Controller 0 */
+ 0, /* CAN Controller 1 */
+ 0, /* mAgicV HALT line */
+ 0, /* mAgicV SIRQ0 line */
+ 0, /* mAgicV exception line */
+ 0, /* mAgicV end of DMA line */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+};
+
+void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at572d940hf_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
+
diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c
new file mode 100644
index 0000000..0fc20a2
--- /dev/null
+++ b/arch/arm/mach-at91/at572d940hf_devices.c
@@ -0,0 +1,970 @@
+/*
+ * arch/arm/mach-at91/at572d940hf_devices.c
+ *
+ * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at572d940hf.h>
+#include <mach/at572d940hf_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+#include "sam9_smc.h"
+
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT572D940HF_UHP_BASE,
+ .end = AT572D940HF_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_UHP,
+ .end = AT572D940HF_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ if (!data)
+ return;
+
+ usbh_data = *data;
+ platform_device_register(&at572d940hf_usbh_device);
+
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_UDP,
+ .end = AT572D940HF_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_UDP,
+ .end = AT572D940HF_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ /* Pullup pin is handled internally */
+
+ udc_data = *data;
+ platform_device_register(&at572d940hf_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_EMAC,
+ .end = AT572D940HF_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_EMAC,
+ .end = AT572D940HF_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Only RMII is supported */
+ data->is_rmii = 1;
+
+ /* Pins used for RMII */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */
+
+ eth_data = *data;
+ platform_device_register(&at572d940hf_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_MCI,
+ .end = AT572D940HF_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_MCI,
+ .end = AT572D940HF_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_mmc_device = {
+ .name = "at91_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PC22, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PC23, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PC24, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PC25, 1);
+ at91_set_A_periph(AT91_PIN_PC26, 1);
+ at91_set_A_periph(AT91_PIN_PC27, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at572d940hf_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at572d940hf_nand_device = {
+ .name = "atmel_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */
+
+ nand_data = *data;
+ platform_device_register(&at572d940hf_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PC7,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PC8,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at572d940hf_twi_device {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PC7, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PC8, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at572d940hf_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi0_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_TWI0,
+ .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_TWI0,
+ .end = AT572D940HF_ID_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_twi0_device = {
+ .name = "at91_i2c",
+ .id = 0,
+ .resource = twi0_resources,
+ .num_resources = ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_TWI1,
+ .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_TWI1,
+ .end = AT572D940HF_ID_TWI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_twi1_device = {
+ .name = "at91_i2c",
+ .id = 1,
+ .resource = twi1_resources,
+ .num_resources = ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ /* pins used for TWI0 interface */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PC7, 1);
+
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PC8, 1);
+
+ /* pins used for TWI1 interface */
+ at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PC20, 1);
+
+ at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PC21, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at572d940hf_twi0_device);
+ platform_device_register(&at572d940hf_twi1_device);
+}
+#else
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_SPI0,
+ .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_SPI0,
+ .end = AT572D940HF_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_SPI1,
+ .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_SPI1,
+ .end = AT572D940HF_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
+ platform_device_register(&at572d940hf_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
+ platform_device_register(&at572d940hf_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Timer/Counter blocks
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_TCB,
+ .end = AT572D940HF_BASE_TCB + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_TC0,
+ .end = AT572D940HF_ID_TC0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AT572D940HF_ID_TC1,
+ .end = AT572D940HF_ID_TC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = AT572D940HF_ID_TC2,
+ .end = AT572D940HF_ID_TC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_tcb_device = {
+ .name = "atmel_tcb",
+ .id = 0,
+ .resource = tcb_resources,
+ .num_resources = ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+ /* this chip has a separate clock and irq for each TC channel */
+ at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
+ at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
+ at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
+ platform_device_register(&at572d940hf_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at572d940hf_rtt_device = {
+ .name = "at91_rtt",
+ .id = 0,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at572d940hf_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct platform_device at572d940hf_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at572d940hf_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_US0,
+ .end = AT572D940HF_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_US0,
+ .end = AT572D940HF_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_US1,
+ .end = AT572D940HF_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_US1,
+ .end = AT572D940HF_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_US2,
+ .end = AT572D940HF_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_US2,
+ .end = AT572D940HF_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at572d940hf_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT572D940HF_ID_US0:
+ pdev = &at572d940hf_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT572D940HF_ID_US1:
+ pdev = &at572d940hf_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT572D940HF_ID_US2:
+ pdev = &at572d940hf_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * mAgic
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_MAGICV
+static struct resource mAgic_resources[] = {
+ {
+ .start = AT91_MAGIC_PM_BASE,
+ .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_DM_I_BASE,
+ .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_DM_F_BASE,
+ .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_DM_DB_BASE,
+ .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_REGS_BASE,
+ .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_EXTPAGE_BASE,
+ .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT572D940HF_ID_MSIRQ0,
+ .end = AT572D940HF_ID_MSIRQ0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AT572D940HF_ID_MHALT,
+ .end = AT572D940HF_ID_MHALT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AT572D940HF_ID_MEXC,
+ .end = AT572D940HF_ID_MEXC,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AT572D940HF_ID_MEDMA,
+ .end = AT572D940HF_ID_MEDMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mAgic_device = {
+ .name = "mAgic",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mAgic_resources),
+ .resource = mAgic_resources,
+};
+
+void __init at91_add_device_mAgic(void)
+{
+ platform_device_register(&mAgic_device);
+}
+#else
+void __init at91_add_device_mAgic(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ at91_add_device_tc();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
new file mode 100644
index 0000000..5daff27
--- /dev/null
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -0,0 +1,328 @@
+/*
+ * linux/arch/arm/mach-at91/board-at572d940hf_ek.c
+ *
+ * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ds1305.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init eb_map_io(void)
+{
+ /* Initialize processor: 12.500 MHz crystal */
+ at572d940hf_initialize(12000000);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx & Tx only) */
+ at91_register_uart(AT572D940HF_ID_US0, 1, 0);
+
+ /* USART1 on ttyS2. (Rx & Tx only) */
+ at91_register_uart(AT572D940HF_ID_US1, 2, 0);
+
+ /* USART2 on ttyS3. (Tx & Rx only */
+ at91_register_uart(AT572D940HF_ID_US2, 3, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init eb_init_irq(void)
+{
+ at572d940hf_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host Port
+ */
+static struct at91_usbh_data __initdata eb_usbh_data = {
+ .ports = 2,
+};
+
+
+/*
+ * USB Device Port
+ */
+static struct at91_udc_data __initdata eb_udc_data = {
+ .vbus_pin = 0, /* no VBUS detection,UDC always on */
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata eb_mmc_data = {
+ .wire4 = 1,
+/* .det_pin = ... not connected */
+/* .wp_pin = ... not connected */
+/* .vcc_pin = ... not connected */
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata eb_eth_data = {
+ .phy_irq_pin = AT91_PIN_PB25,
+ .is_rmii = 1,
+};
+
+/*
+ * NOR flash
+ */
+
+static struct mtd_partition eb_nor_partitions[] = {
+ {
+ .name = "Raw Environment",
+ .offset = 0,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ },
+ {
+ .name = "OS FS",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 3 * SZ_1M,
+ .mask_flags = 0,
+ },
+ {
+ .name = "APP FS",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static void nor_flash_set_vpp(struct map_info* mi, int i) {
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 4,
+ .parts = eb_nor_partitions,
+ .nr_parts = ARRAY_SIZE(eb_nor_partitions),
+ .set_vpp = nor_flash_set_vpp,
+};
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = AT91_CHIPSELECT_0,
+ .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+static struct sam9_smc_config __initdata eb_nor_smc_config = {
+ .ncs_read_setup = 1,
+ .nrd_setup = 1,
+ .ncs_write_setup = 1,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 7,
+ .nrd_pulse = 7,
+ .ncs_write_pulse = 7,
+ .nwe_pulse = 7,
+
+ .read_cycle = 9,
+ .write_cycle = 9,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32,
+ .tdf_cycles = 1,
+};
+
+static void __init eb_add_device_nor(void)
+{
+ /* configure chip-select 0 (NOR) */
+ sam9_smc_configure(0, &eb_nor_smc_config);
+ platform_device_register(&nor_flash);
+}
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata eb_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = SZ_16M,
+ },
+ {
+ .name = "Partition 2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(eb_nand_partition);
+ return eb_nand_partition;
+}
+
+static struct atmel_nand_data __initdata eb_nand_data = {
+ .ale = 22,
+ .cle = 21,
+/* .det_pin = ... not connected */
+/* .rdy_pin = AT91_PIN_PC16, */
+ .enable_pin = AT91_PIN_PA15,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata eb_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 0,
+ .ncs_write_setup = 1,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 12,
+};
+
+static void __init eb_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (eb_nand_data.bus_width_16)
+ eb_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ eb_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &eb_nand_smc_config);
+
+ at91_add_device_nand(&eb_nand_data);
+}
+
+
+/*
+ * SPI devices
+ */
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = AT572D940HF_ID_IRQ1,
+ .end = AT572D940HF_ID_IRQ1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct ds1305_platform_data ds1306_data = {
+ .is_ds1306 = true,
+ .en_1hz = false,
+};
+
+static struct spi_board_info eb_spi_devices[] = {
+ { /* RTC Dallas DS1306 */
+ .modalias = "rtc-ds1305",
+ .chip_select = 3,
+ .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA,
+ .max_speed_hz = 500000,
+ .bus_num = 0,
+ .irq = AT572D940HF_ID_IRQ1,
+ .platform_data = (void *) &ds1306_data,
+ },
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* Dataflash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+};
+
+static void __init eb_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&eb_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&eb_udc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* NOR */
+ eb_add_device_nor();
+ /* NAND */
+ eb_add_device_nand();
+ /* SPI */
+ at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &eb_mmc_data);
+ /* Ethernet */
+ at91_add_device_eth(&eb_eth_data);
+ /* mAgic */
+ at91_add_device_mAgic();
+}
+
+MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
+ /* Maintainer: Atmel <costa.antonior@gmail.com> */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = eb_map_io,
+ .init_irq = eb_init_irq,
+ .init_machine = eb_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index c042dcf..7f7da43 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -29,6 +29,7 @@
#include <mach/cpu.h>
#include "clock.h"
+#include "generic.h"
/*
@@ -628,7 +629,7 @@
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
- cpu_is_at91sam9g10()) {
+ cpu_is_at91sam9g10() || cpu_is_at572d940hf()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
@@ -711,12 +712,13 @@
/*
* USB HS clock init
*/
- if (cpu_has_utmi())
+ if (cpu_has_utmi()) {
/*
* multiplier is hard-wired to 40
* (obtain the USB High Speed 480 MHz when input is 12 MHz)
*/
utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+ }
/*
* USB FS clock init
@@ -746,7 +748,7 @@
mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
} else {
- mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
+ mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
}
/* Register the PMC's standard clocks */
diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h
index 1ba3b95..6cf4b78 100644
--- a/arch/arm/mach-at91/clock.h
+++ b/arch/arm/mach-at91/clock.h
@@ -22,7 +22,7 @@
struct clk *parent;
u32 pmc_mask;
void (*mode)(struct clk *, int);
- unsigned id:2; /* PCK0..3, or 32k/main/a/b */
+ unsigned id:3; /* PCK0..4, or 32k/main/a/b */
unsigned type; /* clock type */
u16 users;
};
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 88e413b..65c3dc5 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -17,6 +17,7 @@
extern void __init at91sam9g45_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91cap9_initialize(unsigned long main_clock);
+extern void __init at572d940hf_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -27,6 +28,7 @@
extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
+extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h
new file mode 100644
index 0000000..2d9b0af
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at572d940hf.h
@@ -0,0 +1,123 @@
+/*
+ * include/mach/at572d940hf.h
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef AT572D940HF_H
+#define AT572D940HF_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */
+#define AT572D940HF_ID_US0 6 /* USART 0 */
+#define AT572D940HF_ID_US1 7 /* USART 1 */
+#define AT572D940HF_ID_US2 8 /* USART 2 */
+#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */
+#define AT572D940HF_ID_UDP 10 /* USB Device Port */
+#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */
+#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */
+#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */
+#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */
+#define AT572D940HF_ID_UHP 20 /* USB Host port */
+#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */
+#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */
+#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */
+#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */
+#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */
+#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */
+#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */
+#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */
+#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */
+#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */
+#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT572D940HF_BASE_TCB 0xfffa0000
+#define AT572D940HF_BASE_TC0 0xfffa0000
+#define AT572D940HF_BASE_TC1 0xfffa0040
+#define AT572D940HF_BASE_TC2 0xfffa0080
+#define AT572D940HF_BASE_UDP 0xfffa4000
+#define AT572D940HF_BASE_MCI 0xfffa8000
+#define AT572D940HF_BASE_TWI0 0xfffac000
+#define AT572D940HF_BASE_US0 0xfffb0000
+#define AT572D940HF_BASE_US1 0xfffb4000
+#define AT572D940HF_BASE_US2 0xfffb8000
+#define AT572D940HF_BASE_SSC0 0xfffbc000
+#define AT572D940HF_BASE_SSC1 0xfffc0000
+#define AT572D940HF_BASE_SSC2 0xfffc4000
+#define AT572D940HF_BASE_SPI0 0xfffc8000
+#define AT572D940HF_BASE_SPI1 0xfffcc000
+#define AT572D940HF_BASE_SSC3 0xfffd0000
+#define AT572D940HF_BASE_TWI1 0xfffd4000
+#define AT572D940HF_BASE_EMAC 0xfffd8000
+#define AT572D940HF_BASE_CAN0 0xfffdc000
+#define AT572D940HF_BASE_CAN1 0xfffe0000
+#define AT91_BASE_SYS 0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT572D940HF_ID_US0
+#define AT91_USART1 AT572D940HF_ID_US1
+#define AT91_USART2 AT572D940HF_ID_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */
+
+#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h
new file mode 100644
index 0000000..b6751df
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h
@@ -0,0 +1,123 @@
+/*
+ * include/mach//at572d940hf_matrix.h
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef AT572D940HF_MATRIX_H
+#define AT572D940HF_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */
+#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */
+#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */
+#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */
+#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */
+#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */
+#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */
+#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */
+#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */
+#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */
+#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */
+#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */
+#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */
+#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */
+#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */
+#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */
+
+
+/*
+ * The following registers / bits are not defined in the Datasheet (Revision A)
+ */
+
+#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_ITCM_64 (7 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 64589ea..e46f93e 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -32,6 +32,7 @@
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_PCK4 (1 << 12) /* Programmable Clock 4 [AT572D940HF only] */
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index bb6f6a7..ceaec6c 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -87,7 +87,7 @@
extern void __init at91_add_device_eth(struct at91_eth_data *data);
#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+ || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF)
#define eth_platform_data at91_eth_data
#endif
@@ -205,6 +205,9 @@
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
+ /* AT572D940HF DSP */
+extern void __init at91_add_device_mAgic(void);
+
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index c22df30..5a06501 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -33,6 +33,8 @@
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
+#define ARCH_ID_AT572D940HF 0x0e0303e0
+
#define ARCH_ID_AT91M40800 0x14080044
#define ARCH_ID_AT91R40807 0x44080746
#define ARCH_ID_AT91M40807 0x14080745
@@ -141,6 +143,12 @@
#define cpu_is_at91cap9_revC() (0)
#endif
+#ifdef CONFIG_ARCH_AT572D940HF
+#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF)
+#else
+#define cpu_is_at572d940hf() (0)
+#endif
+
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 29052ba..9e750a1 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/at91_dbgu.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index a0df8b0..3d64a75 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -32,6 +32,8 @@
#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
+#elif defined(CONFIG_ARCH_AT572D940HF)
+#include <mach/at572d940hf.h>
#else
#error "Unsupported AT91 processor"
#endif
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 31ac2d9..05a6e8a 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -82,6 +82,11 @@
#define AT91X40_MASTER_CLOCK 40000000
#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
+#elif defined(CONFIG_ARCH_AT572D940HF)
+
+#define AT572D940HF_MASTER_CLOCK 80000000
+#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16)
+
#endif
#endif
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 64baf9f..fedd807 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <asm/hardware/clps7111.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #CLPS7111_PHYS_BASE
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 17ab523..3cd93a8 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
#include <linux/serial_reg.h>
#define UART_SHIFT 2
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x01000000 @ physical base address
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
index b4e21a2..7a560e0 100644
--- a/arch/arm/mach-davinci/include/mach/keyscan.h
+++ b/arch/arm/mach-davinci/include/mach/keyscan.h
@@ -29,6 +29,7 @@
};
struct davinci_ks_platform_data {
+ int (*device_enable)(struct device *dev);
unsigned short *keymap;
u32 keymapsize;
u8 rep:1;
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index 9b89ec7..1521d13 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =DOVE_SB_REGS_PHYS_BASE
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 1dde822..ebbd89f 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
**/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mov \rx, #0xf0000000
orr \rx, \rx, #0x00000be0
.endm
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 9167c3d..3a08b18 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -161,6 +161,20 @@
Say 'Y' here if you want your kernel to support the
Contec Micro9-Slim board.
+config MACH_SIM_ONE
+ bool "Support Simplemachines Sim.One board"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the
+ Simplemachines Sim.One board.
+
+config MACH_SNAPPER_CL15
+ bool "Support Bluewater Systems Snapper CL15 Module"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the Bluewater
+ Systems Snapper CL15 Module.
+
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index eae6199..33ee2c8 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -10,4 +10,6 @@
obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_MICRO9) += micro9.o
+obj-$(CONFIG_MACH_SIM_ONE) += simone.o
+obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 1d0f9d8..49fa9f8 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -10,6 +10,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -447,30 +449,34 @@
u32 value;
int i;
- value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
- if (!(value & 0x00800000)) { /* PLL1 bypassed? */
+ /* Determine the bootloader configured pll1 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET1);
+ if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
clk_pll1.rate = clk_xtali.rate;
- } else {
+ else
clk_pll1.rate = calc_pll_rate(value);
- }
+
+ /* Initialize the pll1 derived clocks */
clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
ep93xx_dma_clock_init();
- value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
- if (!(value & 0x00080000)) { /* PLL2 bypassed? */
+ /* Determine the bootloader configured pll2 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET2);
+ if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
clk_pll2.rate = clk_xtali.rate;
- } else if (value & 0x00040000) { /* PLL2 enabled? */
+ else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
clk_pll2.rate = calc_pll_rate(value);
- } else {
+ else
clk_pll2.rate = 0;
- }
+
+ /* Initialize the pll2 derived clocks */
clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
- printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
+ pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
- printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
+ pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
clk_f.rate / 1000000, clk_h.rate / 1000000,
clk_p.rate / 1000000);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 1f0d665..90fb591 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -14,12 +14,15 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/timex.h>
+#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
@@ -35,7 +38,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
@@ -82,13 +84,40 @@
* to use this timer for something else. We also use timer 4 for keeping
* track of lost jiffies.
*/
-static unsigned int last_jiffy_time;
+#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
+#define EP93XX_TIMER123_CONTROL_MODE (1 << 6)
+#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
+#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
+#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
+#define EP93XX_TIMER123_CLOCK 508469
+#define EP93XX_TIMER4_CLOCK 983040
+
+#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1)
#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
+static unsigned int last_jiffy_time;
+
static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
+ /* Writing any value clears the timer interrupt */
__raw_writel(1, EP93XX_TIMER1_CLEAR);
+
+ /* Recover lost jiffies */
while ((signed long)
(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
>= TIMER4_TICKS_PER_JIFFY) {
@@ -107,13 +136,18 @@
static void __init ep93xx_timer_init(void)
{
+ u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
+ EP93XX_TIMER123_CONTROL_CLKSEL;
+
/* Enable periodic HZ timer. */
- __raw_writel(0x48, EP93XX_TIMER1_CONTROL);
- __raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
- __raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
+ __raw_writel(tmode, EP93XX_TIMER1_CONTROL);
+ __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
+ __raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
+ EP93XX_TIMER1_CONTROL);
/* Enable lost jiffy timer. */
- __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
+ __raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
+ EP93XX_TIMER4_VALUE_HIGH);
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
}
@@ -135,237 +169,16 @@
/*************************************************************************
- * GPIO handling for EP93xx
- *************************************************************************/
-static unsigned char gpio_int_unmasked[3];
-static unsigned char gpio_int_enabled[3];
-static unsigned char gpio_int_type1[3];
-static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debounce[3];
-
-/* Port ordering is: A B F */
-static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
-static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
-static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
-static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
-static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
-
-void ep93xx_gpio_update_int_params(unsigned port)
-{
- BUG_ON(port > 2);
-
- __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
-
- __raw_writeb(gpio_int_type2[port],
- EP93XX_GPIO_REG(int_type2_register_offset[port]));
-
- __raw_writeb(gpio_int_type1[port],
- EP93XX_GPIO_REG(int_type1_register_offset[port]));
-
- __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
- EP93XX_GPIO_REG(int_en_register_offset[port]));
-}
-
-void ep93xx_gpio_int_mask(unsigned line)
-{
- gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
-}
-
-void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if (enable)
- gpio_int_debounce[port] |= port_mask;
- else
- gpio_int_debounce[port] &= ~port_mask;
-
- __raw_writeb(gpio_int_debounce[port],
- EP93XX_GPIO_REG(int_debounce_register_offset[port]));
-}
-EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
-
-/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned char status;
- int i;
-
- status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
- for (i = 0; i < 8; i++) {
- if (status & (1 << i)) {
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
- generic_handle_irq(gpio_irq);
- }
- }
-
- status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
- for (i = 0; i < 8; i++) {
- if (status & (1 << i)) {
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
- generic_handle_irq(gpio_irq);
- }
- }
-}
-
-static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- /*
- * map discontiguous hw irq range to continous sw irq range:
- *
- * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
- */
- int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
-
- generic_handle_irq(gpio_irq);
-}
-
-static void ep93xx_gpio_irq_ack(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
- gpio_int_type2[port] ^= port_mask; /* switch edge direction */
- ep93xx_gpio_update_int_params(port);
- }
-
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- gpio_int_type2[port] ^= port_mask; /* switch edge direction */
-
- gpio_int_unmasked[port] &= ~port_mask;
- ep93xx_gpio_update_int_params(port);
-
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
-
- gpio_int_unmasked[port] &= ~(1 << (line & 7));
- ep93xx_gpio_update_int_params(port);
-}
-
-static void ep93xx_gpio_irq_unmask(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
-
- gpio_int_unmasked[port] |= 1 << (line & 7);
- ep93xx_gpio_update_int_params(port);
-}
-
-
-/*
- * gpio_int_type1 controls whether the interrupt is level (0) or
- * edge (1) triggered, while gpio_int_type2 controls whether it
- * triggers on low/falling (0) or high/rising (1).
- */
-static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
-{
- struct irq_desc *desc = irq_desc + irq;
- const int gpio = irq_to_gpio(irq);
- const int port = gpio >> 3;
- const int port_mask = 1 << (gpio & 7);
-
- gpio_direction_input(gpio);
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- gpio_int_type1[port] |= port_mask;
- gpio_int_type2[port] |= port_mask;
- desc->handle_irq = handle_edge_irq;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- gpio_int_type1[port] |= port_mask;
- gpio_int_type2[port] &= ~port_mask;
- desc->handle_irq = handle_edge_irq;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- gpio_int_type1[port] &= ~port_mask;
- gpio_int_type2[port] |= port_mask;
- desc->handle_irq = handle_level_irq;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- gpio_int_type1[port] &= ~port_mask;
- gpio_int_type2[port] &= ~port_mask;
- desc->handle_irq = handle_level_irq;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- gpio_int_type1[port] |= port_mask;
- /* set initial polarity based on current input level */
- if (gpio_get_value(gpio))
- gpio_int_type2[port] &= ~port_mask; /* falling */
- else
- gpio_int_type2[port] |= port_mask; /* rising */
- desc->handle_irq = handle_edge_irq;
- break;
- default:
- pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
- type, gpio);
- return -EINVAL;
- }
-
- gpio_int_enabled[port] |= port_mask;
-
- desc->status &= ~IRQ_TYPE_SENSE_MASK;
- desc->status |= type & IRQ_TYPE_SENSE_MASK;
-
- ep93xx_gpio_update_int_params(port);
-
- return 0;
-}
-
-static struct irq_chip ep93xx_gpio_irq_chip = {
- .name = "GPIO",
- .ack = ep93xx_gpio_irq_ack,
- .mask_ack = ep93xx_gpio_irq_mask_ack,
- .mask = ep93xx_gpio_irq_mask,
- .unmask = ep93xx_gpio_irq_unmask,
- .set_type = ep93xx_gpio_irq_type,
-};
-
+extern void ep93xx_gpio_init_irq(void);
void __init ep93xx_init_irq(void)
{
- int gpio_irq;
-
vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
- for (gpio_irq = gpio_to_irq(0);
- gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
- set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
- set_irq_handler(gpio_irq, handle_level_irq);
- set_irq_flags(gpio_irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
+ ep93xx_gpio_init_irq();
}
@@ -572,9 +385,9 @@
* CMOS driver.
*/
if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
- pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+ pr_warning("sda != EEDAT, open drain has no effect\n");
if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
- pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+ pr_warning("scl != EECLK, open drain has no effect\n");
__raw_writel((data->sda_is_open_drain << 1) |
(data->scl_is_open_drain << 0),
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index dbcac9c4..8904ca4 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -28,6 +28,8 @@
* with this implementation.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -173,7 +175,7 @@
switch (m2p_channel_state(ch)) {
case STATE_IDLE:
- pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+ pr_crit("dma interrupt without a dma buffer\n");
BUG();
break;
@@ -197,7 +199,7 @@
break;
case STATE_NEXT:
- pr_crit("m2p_irq: dma interrupt while next\n");
+ pr_crit("dma interrupt while next\n");
BUG();
break;
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index a4a7be3..d22d67a 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -118,12 +118,33 @@
}
}
+
+/*************************************************************************
+ * EDB93xx pwm
+ *************************************************************************/
+static void __init edb93xx_register_pwm(void)
+{
+ if (machine_is_edb9301() ||
+ machine_is_edb9302() || machine_is_edb9302a()) {
+ /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
+ ep93xx_register_pwm(0, 1);
+ } else if (machine_is_edb9307() || machine_is_edb9307a()) {
+ /* EP9307 only has pwm.0 (PWMOUT) */
+ ep93xx_register_pwm(1, 0);
+ } else {
+ /* EP9312 and EP9315 have both */
+ ep93xx_register_pwm(1, 1);
+ }
+}
+
+
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
+ edb93xx_register_pwm();
}
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 1ea8871..cc377ae 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -13,6 +13,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/seq_file.h>
@@ -22,6 +24,235 @@
#include <mach/hardware.h>
+/*************************************************************************
+ * GPIO handling for EP93xx
+ *************************************************************************/
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
+static unsigned char gpio_int_debounce[3];
+
+/* Port ordering is: A B F */
+static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
+static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
+static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
+static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
+static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
+
+void ep93xx_gpio_update_int_params(unsigned port)
+{
+ BUG_ON(port > 2);
+
+ __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
+
+ __raw_writeb(gpio_int_type2[port],
+ EP93XX_GPIO_REG(int_type2_register_offset[port]));
+
+ __raw_writeb(gpio_int_type1[port],
+ EP93XX_GPIO_REG(int_type1_register_offset[port]));
+
+ __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
+ EP93XX_GPIO_REG(int_en_register_offset[port]));
+}
+
+void ep93xx_gpio_int_mask(unsigned line)
+{
+ gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
+}
+
+void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if (enable)
+ gpio_int_debounce[port] |= port_mask;
+ else
+ gpio_int_debounce[port] &= ~port_mask;
+
+ __raw_writeb(gpio_int_debounce[port],
+ EP93XX_GPIO_REG(int_debounce_register_offset[port]));
+}
+EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
+
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned char status;
+ int i;
+
+ status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i)) {
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
+ generic_handle_irq(gpio_irq);
+ }
+ }
+
+ status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i)) {
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
+ generic_handle_irq(gpio_irq);
+ }
+ }
+}
+
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ /*
+ * map discontiguous hw irq range to continous sw irq range:
+ *
+ * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
+ */
+ int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
+
+ generic_handle_irq(gpio_irq);
+}
+
+static void ep93xx_gpio_irq_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+ ep93xx_gpio_update_int_params(port);
+ }
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+
+ gpio_int_unmasked[port] &= ~port_mask;
+ ep93xx_gpio_update_int_params(port);
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
+static void ep93xx_gpio_irq_mask(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+
+ gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ ep93xx_gpio_update_int_params(port);
+}
+
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+
+ gpio_int_unmasked[port] |= 1 << (line & 7);
+ ep93xx_gpio_update_int_params(port);
+}
+
+/*
+ * gpio_int_type1 controls whether the interrupt is level (0) or
+ * edge (1) triggered, while gpio_int_type2 controls whether it
+ * triggers on low/falling (0) or high/rising (1).
+ */
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+ struct irq_desc *desc = irq_desc + irq;
+ const int gpio = irq_to_gpio(irq);
+ const int port = gpio >> 3;
+ const int port_mask = 1 << (gpio & 7);
+
+ gpio_direction_input(gpio);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ gpio_int_type1[port] |= port_mask;
+ /* set initial polarity based on current input level */
+ if (gpio_get_value(gpio))
+ gpio_int_type2[port] &= ~port_mask; /* falling */
+ else
+ gpio_int_type2[port] |= port_mask; /* rising */
+ desc->handle_irq = handle_edge_irq;
+ break;
+ default:
+ pr_err("failed to set irq type %d for gpio %d\n", type, gpio);
+ return -EINVAL;
+ }
+
+ gpio_int_enabled[port] |= port_mask;
+
+ desc->status &= ~IRQ_TYPE_SENSE_MASK;
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
+ ep93xx_gpio_update_int_params(port);
+
+ return 0;
+}
+
+static struct irq_chip ep93xx_gpio_irq_chip = {
+ .name = "GPIO",
+ .ack = ep93xx_gpio_irq_ack,
+ .mask_ack = ep93xx_gpio_irq_mask_ack,
+ .mask = ep93xx_gpio_irq_mask,
+ .unmask = ep93xx_gpio_irq_unmask,
+ .set_type = ep93xx_gpio_irq_type,
+};
+
+void __init ep93xx_gpio_init_irq(void)
+{
+ int gpio_irq;
+
+ for (gpio_irq = gpio_to_irq(0);
+ gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
+ set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
+ set_irq_handler(gpio_irq, handle_level_irq);
+ set_irq_flags(gpio_irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
+}
+
+
+/*************************************************************************
+ * gpiolib interface for EP93xx on-chip GPIOs
+ *************************************************************************/
struct ep93xx_gpio_chip {
struct gpio_chip chip;
@@ -31,10 +262,6 @@
#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
-/* From core.c */
-extern void ep93xx_gpio_int_mask(unsigned line);
-extern void ep93xx_gpio_update_int_params(unsigned port);
-
static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index 802858b..5cd2244 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*/
#include <mach/ep93xx-regs.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index d55194a..93e2ecc 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -92,21 +92,6 @@
/* APB peripherals */
#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
-#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
@@ -167,8 +152,11 @@
#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16)
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23)
+#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19)
+#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18)
#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
new file mode 100644
index 0000000..cd93990
--- /dev/null
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-ep93xx/simone.c
+ * Simplemachines Sim.One support.
+ *
+ * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on the 2.6.24.7 support:
+ * Copyright (C) 2009 Simplemachines
+ * MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data simone_flash_data = {
+ .width = 2,
+};
+
+static struct resource simone_flash_resource = {
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device simone_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &simone_flash_resource,
+ .dev = {
+ .platform_data = &simone_flash_data,
+ },
+};
+
+static struct ep93xx_eth_data simone_eth_data = {
+ .phy_id = 1,
+};
+
+static struct ep93xxfb_mach_info simone_fb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+};
+
+static struct i2c_gpio_platform_data simone_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0,
+ .timeout = 0,
+};
+
+static struct i2c_board_info __initdata simone_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+};
+
+static void __init simone_init_machine(void)
+{
+ ep93xx_init_devices();
+
+ platform_device_register(&simone_flash);
+ ep93xx_register_eth(&simone_eth_data, 1);
+ ep93xx_register_fb(&simone_fb_info);
+ ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
+ ARRAY_SIZE(simone_i2c_board_info));
+}
+
+MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
+/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = simone_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
new file mode 100644
index 0000000..51134b0
--- /dev/null
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-ep93xx/snappercl15.c
+ * Bluewater Systems Snapper CL15 system module
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * NAND code adapted from driver by:
+ * Andre Renaud <andre@bluewatersys.com>
+ * James R. McKaskill
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
+
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M)
+
+#define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */
+#define SNAPPERCL15_NAND_ALE (1 << 9) /* Address latch */
+#define SNAPPERCL15_NAND_CLE (1 << 10) /* Command latch */
+#define SNAPPERCL15_NAND_CEN (1 << 11) /* Chip enable (active low) */
+#define SNAPPERCL15_NAND_RDY (1 << 14) /* Device ready */
+
+#define NAND_CTRL_ADDR(chip) (chip->IO_ADDR_W + 0x40)
+
+static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ static u16 nand_state = SNAPPERCL15_NAND_WPN;
+ u16 set;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
+
+ if (ctrl & NAND_NCE)
+ set &= ~SNAPPERCL15_NAND_CEN;
+ if (ctrl & NAND_CLE)
+ set |= SNAPPERCL15_NAND_CLE;
+ if (ctrl & NAND_ALE)
+ set |= SNAPPERCL15_NAND_ALE;
+
+ nand_state &= ~(SNAPPERCL15_NAND_CEN |
+ SNAPPERCL15_NAND_CLE |
+ SNAPPERCL15_NAND_ALE);
+ nand_state |= set;
+ __raw_writew(nand_state, NAND_CTRL_ADDR(chip));
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ __raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W);
+}
+
+static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
+}
+
+static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
+
+static struct mtd_partition snappercl15_nand_parts[] = {
+ {
+ .name = "Kernel",
+ .offset = 0,
+ .size = SZ_2M,
+ },
+ {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct platform_nand_data snappercl15_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .part_probe_types = snappercl15_nand_part_probes,
+ .partitions = snappercl15_nand_parts,
+ .nr_partitions = ARRAY_SIZE(snappercl15_nand_parts),
+ .options = NAND_NO_AUTOINCR,
+ .chip_delay = 25,
+ },
+ .ctrl = {
+ .dev_ready = snappercl15_nand_dev_ready,
+ .cmd_ctrl = snappercl15_nand_cmd_ctrl,
+ },
+};
+
+static struct resource snappercl15_nand_resource[] = {
+ {
+ .start = SNAPPERCL15_NAND_BASE,
+ .end = SNAPPERCL15_NAND_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device snappercl15_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev.platform_data = &snappercl15_nand_data,
+ .resource = snappercl15_nand_resource,
+ .num_resources = ARRAY_SIZE(snappercl15_nand_resource),
+};
+
+static struct ep93xx_eth_data snappercl15_eth_data = {
+ .phy_id = 1,
+};
+
+static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0,
+ .timeout = 0,
+};
+
+static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
+ {
+ /* Audio codec */
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+};
+
+static struct ep93xxfb_mach_info snappercl15_fb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+};
+
+static void __init snappercl15_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_eth(&snappercl15_eth_data, 1);
+ ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
+ ARRAY_SIZE(snappercl15_i2c_data));
+ ep93xx_register_fb(&snappercl15_fb_info);
+ platform_device_register(&snappercl15_nand_device);
+}
+
+MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
+ /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = snappercl15_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 4329b81..60dda13 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
#ifndef CONFIG_DEBUG_DC21285_PORT
/* For NetWinder debugging */
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x7c000000 @ physical
@@ -32,7 +32,7 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x42000000
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index d04a6ea..ad47704 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*/
#include <mach/hardware.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =GEMINI_UART_BASE @ physical
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
index 59c5df7..5483f61 100644
--- a/arch/arm/mach-gemini/include/mach/uncompress.h
+++ b/arch/arm/mach-gemini/include/mach/uncompress.h
@@ -30,7 +30,9 @@
UART[UART_TX] = c;
}
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
/*
* nothing to do
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 6294a13..a9ee8f0 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
.equ io_virt, IO_BASE
.equ io_phys, IO_START
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #io_phys @ physical base address
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index d347d65..87a6888 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x16000000 @ physical base address
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index 9037d2e..c9d6ba4 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
moveq \rx, #0xff000000 @ physical
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index 58b0166..736afe1 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rx
+ .macro addruart, rx, tmp
mov \rx, #0xfe000000 @ physical as well as virtual
orr \rx, \rx, #0x00800000 @ location of the UART
.endm
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index a60c9ef..addb2da 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
moveq \rx, #0xff000000 @ physical
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 904ff56..6a82768 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc0000000 @ Physical base
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index 905db31..a82e3754 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <mach/ixp23xx.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3bbf40f..71728d3 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -427,6 +427,17 @@
}
/*
+ * sched_clock()
+ */
+unsigned long long sched_clock(void)
+{
+ cycle_t cyc = ixp4xx_get_cycles(NULL);
+ struct clocksource *cs = &clocksource_ixp4xx;
+
+ return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+}
+
+/*
* clockevents
*/
static int ixp4xx_set_next_event(unsigned long evt,
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 7c6a691..893873e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc8000000
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index a4a55c1..d060677 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index 3782c35..cf2095d 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/regs-uart.h>
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =KS8695_UART_PA @ physical base address
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index 34eed2a..b69ed34 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
.equ io_virt, IO_BASE
.equ io_phys, IO_START
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #io_phys @ physical base address
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index 85141ed..c0dcbbb 100644
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
@ It is not known if this will be appropriate for every 40x
@ board.
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
mov \rx, #0x00000700 @ offset from base
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
index a8c20bd..3136c91 100644
--- a/arch/arm/mach-loki/include/mach/debug-macro.S
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/loki.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =LOKI_REGS_PHYS_BASE
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index a850f87..76deff2 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
#include <mach/addr-map.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =APB_PHYS_BASE @ physical
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index d48747e..528750f 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
#include <mach/msm_iomap.h>
#ifdef CONFIG_MSM_DEBUG_UART
- .macro addruart,rx
+ .macro addruart, rx, tmp
@ see if the MMU is enabled and select appropriate base address
mrc p15, 0, \rx, c1, c0
tst \rx, #1
@@ -40,7 +40,7 @@
beq 1001b
.endm
#else
- .macro addruart,rx
+ .macro addruart, rx, tmp
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index a06442f..cd81689 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/mv78xx0.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =MV78XX0_REGS_PHYS_BASE
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 11b9d5b..e96339e 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include "hardware.h"
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x00100000 @ physical
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e876990..4f92acf 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000 @ physical base address
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index c9530fb..0859336 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
#include <mach/regs-board-a9m9750dev.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0)
diff --git a/arch/arm/mach-nuc93x/Kconfig b/arch/arm/mach-nuc93x/Kconfig
new file mode 100644
index 0000000..2bc40a2
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Kconfig
@@ -0,0 +1,19 @@
+if ARCH_NUC93X
+
+config CPU_NUC932
+ bool
+ help
+ Support for NUC932 of Nuvoton NUC93X CPUs.
+
+menu "NUC932 Machines"
+
+config MACH_NUC932EVB
+ bool "Nuvoton NUC932 Evaluation Board"
+ default y
+ select CPU_NUC932
+ help
+ Say Y here if you are using the Nuvoton NUC932EVB
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-nuc93x/Makefile b/arch/arm/mach-nuc93x/Makefile
new file mode 100644
index 0000000..440e2de
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := irq.o time.o dev.o cpu.o clock.o
+# NUC932 CPU support files
+
+obj-$(CONFIG_CPU_NUC932) += nuc932.o
+
+# machine support
+
+obj-$(CONFIG_MACH_NUC932EVB) += mach-nuc932evb.o
diff --git a/arch/arm/mach-nuc93x/Makefile.boot b/arch/arm/mach-nuc93x/Makefile.boot
new file mode 100644
index 0000000..a057b54
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+
diff --git a/arch/arm/mach-nuc93x/clock.c b/arch/arm/mach-nuc93x/clock.c
new file mode 100644
index 0000000..0521efb
--- /dev/null
+++ b/arch/arm/mach-nuc93x/clock.c
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/arm/mach-nuc93x/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ (clk->enable)(clk, 1);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ (clk->enable)(clk, 0);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return 27000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void nuc93x_clk_enable(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->cken;
+ unsigned long clken;
+
+ clken = __raw_readl(NUC93X_VA_CLKPWR);
+
+ if (enable)
+ clken |= clocks;
+ else
+ clken &= ~clocks;
+
+ __raw_writel(clken, NUC93X_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+ int i;
+
+ for (i = 0; i < num; i++)
+ clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-nuc93x/clock.h b/arch/arm/mach-nuc93x/clock.h
new file mode 100644
index 0000000..18e51be
--- /dev/null
+++ b/arch/arm/mach-nuc93x/clock.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-nuc93x/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void nuc93x_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+ unsigned long cken;
+ unsigned int enabled;
+ void (*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit) \
+struct clk clk_##_name = { \
+ .enable = nuc93x_clk_enable, \
+ .cken = (1 << _ctrlbit), \
+ }
+
+#define DEF_CLKLOOK(_clk, _devname, _conname) \
+ { \
+ .clk = _clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
diff --git a/arch/arm/mach-nuc93x/cpu.c b/arch/arm/mach-nuc93x/cpu.c
new file mode 100644
index 0000000..f6ff5d8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/cpu.c
@@ -0,0 +1,135 @@
+/*
+ * linux/arch/arm/mach-nuc93x/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC93x series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc93x_iodesc[] __initdata = {
+ IODESC_ENT(IRQ),
+ IODESC_ENT(GCR),
+ IODESC_ENT(UART),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(EBI),
+};
+
+/* Initial nuc932 clock declarations. */
+static DEFINE_CLK(audio, 2);
+static DEFINE_CLK(sd, 3);
+static DEFINE_CLK(jpg, 4);
+static DEFINE_CLK(video, 5);
+static DEFINE_CLK(vpost, 6);
+static DEFINE_CLK(2d, 7);
+static DEFINE_CLK(gpu, 8);
+static DEFINE_CLK(gdma, 9);
+static DEFINE_CLK(adc, 10);
+static DEFINE_CLK(uart, 11);
+static DEFINE_CLK(spi, 12);
+static DEFINE_CLK(pwm, 13);
+static DEFINE_CLK(timer, 14);
+static DEFINE_CLK(wdt, 15);
+static DEFINE_CLK(ac97, 16);
+static DEFINE_CLK(i2s, 16);
+static DEFINE_CLK(usbck, 17);
+static DEFINE_CLK(usb48, 18);
+static DEFINE_CLK(usbh, 19);
+static DEFINE_CLK(i2c, 20);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc932_clkregs[] = {
+ DEF_CLKLOOK(&clk_audio, "nuc932-audio", NULL),
+ DEF_CLKLOOK(&clk_sd, "nuc932-sd", NULL),
+ DEF_CLKLOOK(&clk_jpg, "nuc932-jpg", "NULL"),
+ DEF_CLKLOOK(&clk_video, "nuc932-video", "NULL"),
+ DEF_CLKLOOK(&clk_vpost, "nuc932-vpost", NULL),
+ DEF_CLKLOOK(&clk_2d, "nuc932-2d", NULL),
+ DEF_CLKLOOK(&clk_gpu, "nuc932-gpu", NULL),
+ DEF_CLKLOOK(&clk_gdma, "nuc932-gdma", "NULL"),
+ DEF_CLKLOOK(&clk_adc, "nuc932-adc", NULL),
+ DEF_CLKLOOK(&clk_uart, NULL, "uart"),
+ DEF_CLKLOOK(&clk_spi, "nuc932-spi", NULL),
+ DEF_CLKLOOK(&clk_pwm, "nuc932-pwm", NULL),
+ DEF_CLKLOOK(&clk_timer, NULL, "timer"),
+ DEF_CLKLOOK(&clk_wdt, "nuc932-wdt", NULL),
+ DEF_CLKLOOK(&clk_ac97, "nuc932-ac97", NULL),
+ DEF_CLKLOOK(&clk_i2s, "nuc932-i2s", NULL),
+ DEF_CLKLOOK(&clk_usbck, "nuc932-usbck", NULL),
+ DEF_CLKLOOK(&clk_usb48, "nuc932-usb48", NULL),
+ DEF_CLKLOOK(&clk_usbh, "nuc932-usbh", NULL),
+ DEF_CLKLOOK(&clk_i2c, "nuc932-i2c", NULL),
+ DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc93x_uart_data[] = {
+ NUC93X_8250PORT(UART0),
+ {},
+};
+
+struct platform_device nuc93x_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = nuc93x_uart_data,
+ },
+};
+
+/*Init NUC93x evb io*/
+
+void __init nuc93x_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ unsigned long idcode = 0x0;
+
+ iotable_init(mach_desc, mach_size);
+ iotable_init(nuc93x_iodesc, ARRAY_SIZE(nuc93x_iodesc));
+
+ idcode = __raw_readl(NUC93XPDID);
+ if (idcode == NUC932_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+ else
+ printk(KERN_ERR "CPU type detect error!\n");
+
+}
+
+/*Init NUC93x clock*/
+
+void __init nuc93x_init_clocks(void)
+{
+ clks_register(nuc932_clkregs, ARRAY_SIZE(nuc932_clkregs));
+}
+
diff --git a/arch/arm/mach-nuc93x/cpu.h b/arch/arm/mach-nuc93x/cpu.h
new file mode 100644
index 0000000..9def28197
--- /dev/null
+++ b/arch/arm/mach-nuc93x/cpu.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-nuc93x/cpu.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Header file for NUC93X CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define IODESC_ENT(y) \
+{ \
+ .virtual = (unsigned long)NUC93X_VA_##y, \
+ .pfn = __phys_to_pfn(NUC93X_PA_##y), \
+ .length = NUC93X_SZ_##y, \
+ .type = MT_DEVICE, \
+}
+
+#define NUC93X_8250PORT(name) \
+{ \
+ .membase = name##_BA, \
+ .mapbase = name##_PA, \
+ .irq = IRQ_##name, \
+ .uartclk = 57139200, \
+ .regshift = 2, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
+}
+
+/*Cpu identifier register*/
+
+#define NUC93XPDID NUC93X_VA_GCR
+#define NUC932_CPUID 0x29550091
+
+/* extern file from cpu.c */
+
+extern void nuc93x_clock_source(struct device *dev, unsigned char *src);
+extern void nuc93x_init_clocks(void);
+extern void nuc93x_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc93x_board_init(struct platform_device **device, int size);
+extern struct platform_device nuc93x_serial_device;
+
diff --git a/arch/arm/mach-nuc93x/dev.c b/arch/arm/mach-nuc93x/dev.c
new file mode 100644
index 0000000..a962ae9
--- /dev/null
+++ b/arch/arm/mach-nuc93x/dev.c
@@ -0,0 +1,42 @@
+/*
+ * linux/arch/arm/mach-nuc93x/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include "cpu.h"
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc93x_public_dev[] __initdata = {
+ &nuc93x_serial_device,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc93x_board_init(struct platform_device **device, int size)
+{
+ platform_add_devices(device, size);
+ platform_add_devices(nuc93x_public_dev, ARRAY_SIZE(nuc93x_public_dev));
+}
+
diff --git a/arch/arm/mach-nuc93x/include/mach/clkdev.h b/arch/arm/mach-nuc93x/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/entry-macro.S b/arch/arm/mach-nuc93x/include/mach/entry-macro.S
new file mode 100644
index 0000000..1352cbd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/entry-macro.S
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \base, #AIC_BA
+
+ ldr \irqnr, [ \base, #AIC_IPER]
+ ldr \irqnr, [ \base, #AIC_ISNR]
+ cmp \irqnr, #0
+
+ .endm
+
+ /* currently don't need an disable_fiq macro */
+
+ .macro disable_fiq
+ .endm
diff --git a/arch/arm/mach-nuc93x/include/mach/hardware.h b/arch/arm/mach-nuc93x/include/mach/hardware.h
new file mode 100644
index 0000000..fb5c6fc
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/hardware.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/hardware.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/io.h b/arch/arm/mach-nuc93x/include/mach/io.h
new file mode 100644
index 0000000..72e5051
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/io.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+
+#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/irqs.h b/arch/arm/mach-nuc93x/include/mach/irqs.h
new file mode 100644
index 0000000..7c4aa71
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/irqs.h
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/irqs.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NUC93X_IRQ(x) (x)
+
+/* Main cpu interrupts */
+
+#define IRQ_WDT NUC93X_IRQ(1)
+#define IRQ_IRQ0 NUC93X_IRQ(2)
+#define IRQ_IRQ1 NUC93X_IRQ(3)
+#define IRQ_IRQ2 NUC93X_IRQ(4)
+#define IRQ_IRQ3 NUC93X_IRQ(5)
+#define IRQ_USBH NUC93X_IRQ(6)
+#define IRQ_APU NUC93X_IRQ(7)
+#define IRQ_VPOST NUC93X_IRQ(8)
+#define IRQ_ADC NUC93X_IRQ(9)
+#define IRQ_UART0 NUC93X_IRQ(10)
+#define IRQ_TIMER0 NUC93X_IRQ(11)
+#define IRQ_GPU0 NUC93X_IRQ(12)
+#define IRQ_GPU1 NUC93X_IRQ(13)
+#define IRQ_GPU2 NUC93X_IRQ(14)
+#define IRQ_GPU3 NUC93X_IRQ(15)
+#define IRQ_GPU4 NUC93X_IRQ(16)
+#define IRQ_VIN NUC93X_IRQ(17)
+#define IRQ_USBD NUC93X_IRQ(18)
+#define IRQ_VRAMLD NUC93X_IRQ(19)
+#define IRQ_GDMA0 NUC93X_IRQ(20)
+#define IRQ_GDMA1 NUC93X_IRQ(21)
+#define IRQ_SDIO NUC93X_IRQ(22)
+#define IRQ_FMI NUC93X_IRQ(22)
+#define IRQ_JPEG NUC93X_IRQ(23)
+#define IRQ_SPI0 NUC93X_IRQ(24)
+#define IRQ_SPI1 NUC93X_IRQ(25)
+#define IRQ_RTC NUC93X_IRQ(26)
+#define IRQ_PWM0 NUC93X_IRQ(27)
+#define IRQ_PWM1 NUC93X_IRQ(28)
+#define IRQ_PWM2 NUC93X_IRQ(29)
+#define IRQ_PWM3 NUC93X_IRQ(30)
+#define IRQ_I2SAC97 NUC93X_IRQ(31)
+#define IRQ_CAP0 IRQ_PWM0
+#define IRQ_CAP1 IRQ_PWM1
+#define IRQ_CAP2 IRQ_PWM2
+#define IRQ_CAP3 IRQ_PWM3
+#define NR_IRQS (IRQ_I2SAC97 + 1)
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/map.h b/arch/arm/mach-nuc93x/include/mach/map.h
new file mode 100644
index 0000000..fd0b5e8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/map.h
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/map.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#define MAP_OFFSET (0xfff00000)
+#define CLK_OFFSET (0x10)
+
+#ifndef __ASSEMBLY__
+#define NUC93X_ADDR(x) ((void __iomem *)(0xF0000000 + ((x)&(~MAP_OFFSET))))
+#else
+#define NUC93X_ADDR(x) (0xF0000000 + ((x)&(~MAP_OFFSET)))
+#endif
+
+ /*
+ * nuc932 hardware register definition
+ */
+
+#define NUC93X_PA_IRQ (0xFFF83000)
+#define NUC93X_PA_GCR (0xFFF00000)
+#define NUC93X_PA_EBI (0xFFF01000)
+#define NUC93X_PA_UART (0xFFF80000)
+#define NUC93X_PA_TIMER (0xFFF81000)
+#define NUC93X_PA_GPIO (0xFFF84000)
+#define NUC93X_PA_GDMA (0xFFF03000)
+#define NUC93X_PA_USBHOST (0xFFF0d000)
+#define NUC93X_PA_I2C (0xFFF89000)
+#define NUC93X_PA_LCD (0xFFF06000)
+#define NUC93X_PA_GE (0xFFF05000)
+#define NUC93X_PA_ADC (0xFFF85000)
+#define NUC93X_PA_RTC (0xFFF87000)
+#define NUC93X_PA_PWM (0xFFF82000)
+#define NUC93X_PA_ACTL (0xFFF0a000)
+#define NUC93X_PA_USBDEV (0xFFF0C000)
+#define NUC93X_PA_JEPEG (0xFFF0e000)
+#define NUC93X_PA_CACHE_T (0xFFF60000)
+#define NUC93X_PA_VRAM (0xFFF0b000)
+#define NUC93X_PA_DMAC (0xFFF09000)
+#define NUC93X_PA_I2SM (0xFFF08000)
+#define NUC93X_PA_CACHE (0xFFF02000)
+#define NUC93X_PA_GPU (0xFFF04000)
+#define NUC93X_PA_VIDEOIN (0xFFF07000)
+#define NUC93X_PA_SPI0 (0xFFF86000)
+#define NUC93X_PA_SPI1 (0xFFF88000)
+
+ /*
+ * nuc932 virtual address mapping.
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+
+#define NUC93X_VA_IRQ NUC93X_ADDR(0x00000000)
+#define NUC93X_SZ_IRQ SZ_4K
+
+#define NUC93X_VA_GCR NUC93X_ADDR(NUC93X_PA_IRQ)
+#define NUC93X_VA_CLKPWR (NUC93X_VA_GCR+CLK_OFFSET)
+#define NUC93X_SZ_GCR SZ_4K
+
+/* EBI management */
+
+#define NUC93X_VA_EBI NUC93X_ADDR(NUC93X_PA_EBI)
+#define NUC93X_SZ_EBI SZ_4K
+
+/* UARTs */
+
+#define NUC93X_VA_UART NUC93X_ADDR(NUC93X_PA_UART)
+#define NUC93X_SZ_UART SZ_4K
+
+/* Timers */
+
+#define NUC93X_VA_TIMER NUC93X_ADDR(NUC93X_PA_TIMER)
+#define NUC93X_SZ_TIMER SZ_4K
+
+/* GPIO ports */
+
+#define NUC93X_VA_GPIO NUC93X_ADDR(NUC93X_PA_GPIO)
+#define NUC93X_SZ_GPIO SZ_4K
+
+/* GDMA control */
+
+#define NUC93X_VA_GDMA NUC93X_ADDR(NUC93X_PA_GDMA)
+#define NUC93X_SZ_GDMA SZ_4K
+
+/* I2C hardware controller */
+
+#define NUC93X_VA_I2C NUC93X_ADDR(NUC93X_PA_I2C)
+#define NUC93X_SZ_I2C SZ_4K
+
+/* LCD controller*/
+
+#define NUC93X_VA_LCD NUC93X_ADDR(NUC93X_PA_LCD)
+#define NUC93X_SZ_LCD SZ_4K
+
+/* 2D controller*/
+
+#define NUC93X_VA_GE NUC93X_ADDR(NUC93X_PA_GE)
+#define NUC93X_SZ_GE SZ_4K
+
+/* ADC */
+
+#define NUC93X_VA_ADC NUC93X_ADDR(NUC93X_PA_ADC)
+#define NUC93X_SZ_ADC SZ_4K
+
+/* RTC */
+
+#define NUC93X_VA_RTC NUC93X_ADDR(NUC93X_PA_RTC)
+#define NUC93X_SZ_RTC SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+
+#define NUC93X_VA_PWM NUC93X_ADDR(NUC93X_PA_PWM)
+#define NUC93X_SZ_PWM SZ_4K
+
+/* Audio Controller controller */
+
+#define NUC93X_VA_ACTL NUC93X_ADDR(NUC93X_PA_ACTL)
+#define NUC93X_SZ_ACTL SZ_4K
+
+/* USB Device port */
+
+#define NUC93X_VA_USBDEV NUC93X_ADDR(NUC93X_PA_USBDEV)
+#define NUC93X_SZ_USBDEV SZ_4K
+
+/* USB host controller*/
+#define NUC93X_VA_USBHOST NUC93X_ADDR(NUC93X_PA_USBHOST)
+#define NUC93X_SZ_USBHOST SZ_4K
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h
new file mode 100644
index 0000000..323ab0d
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/memory.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/memory.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-clock.h b/arch/arm/mach-nuc93x/include/mach/regs-clock.h
new file mode 100644
index 0000000..5cb2954
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-clock.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers */
+#define CLK_BA NUC93X_VA_CLKPWR
+#define REG_CLKEN (CLK_BA + 0x00)
+#define REG_CLKSEL (CLK_BA + 0x04)
+#define REG_CLKDIV (CLK_BA + 0x08)
+#define REG_PLLCON0 (CLK_BA + 0x0C)
+#define REG_PLLCON1 (CLK_BA + 0x10)
+#define REG_PMCON (CLK_BA + 0x14)
+#define REG_IRQWAKECON (CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG (CLK_BA + 0x1C)
+#define REG_IPSRST (CLK_BA + 0x20)
+#define REG_CLKEN1 (CLK_BA + 0x24)
+#define REG_CLKDIV1 (CLK_BA + 0x28)
+
+/* Define PLL freq setting */
+#define PLL_DISABLE 0x12B63
+#define PLL_66MHZ 0x2B63
+#define PLL_100MHZ 0x4F64
+#define PLL_120MHZ 0x4F63
+#define PLL_166MHZ 0x4124
+#define PLL_200MHZ 0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define AHB_CPUCLK_1_1 0x00
+#define AHB_CPUCLK_1_2 0x01
+#define AHB_CPUCLK_1_4 0x02
+#define AHB_CPUCLK_1_8 0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2 0x01
+#define APB_AHB_1_4 0x02
+#define APB_AHB_1_8 0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW 0x48
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-ebi.h b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
new file mode 100644
index 0000000..3c72550
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA NUC93X_VA_EBI
+#define REG_EBICON (EBI_BA + 0x00)
+#define REG_ROMCON (EBI_BA + 0x04)
+#define REG_SDCONF0 (EBI_BA + 0x08)
+#define REG_SDCONF1 (EBI_BA + 0x0C)
+#define REG_SDTIME0 (EBI_BA + 0x10)
+#define REG_SDTIME1 (EBI_BA + 0x14)
+#define REG_EXT0CON (EBI_BA + 0x18)
+#define REG_EXT1CON (EBI_BA + 0x1C)
+#define REG_EXT2CON (EBI_BA + 0x20)
+#define REG_EXT3CON (EBI_BA + 0x24)
+#define REG_EXT4CON (EBI_BA + 0x28)
+#define REG_CKSKEW (EBI_BA + 0x2C)
+
+#endif /* __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-irq.h b/arch/arm/mach-nuc93x/include/mach/regs-irq.h
new file mode 100644
index 0000000..2302159
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-irq.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* Advance Interrupt Controller (AIC) Registers */
+
+#define AIC_BA NUC93X_VA_IRQ
+
+#define REG_AIC_IRQSC (AIC_BA+0x80)
+#define REG_AIC_GEN (AIC_BA+0x84)
+#define REG_AIC_GASR (AIC_BA+0x88)
+#define REG_AIC_GSCR (AIC_BA+0x8C)
+#define REG_AIC_IRSR (AIC_BA+0x100)
+#define REG_AIC_IASR (AIC_BA+0x104)
+#define REG_AIC_ISR (AIC_BA+0x108)
+#define REG_AIC_IPER (AIC_BA+0x10C)
+#define REG_AIC_ISNR (AIC_BA+0x110)
+#define REG_AIC_IMR (AIC_BA+0x114)
+#define REG_AIC_OISR (AIC_BA+0x118)
+#define REG_AIC_MECR (AIC_BA+0x120)
+#define REG_AIC_MDCR (AIC_BA+0x124)
+#define REG_AIC_SSCR (AIC_BA+0x128)
+#define REG_AIC_SCCR (AIC_BA+0x12C)
+#define REG_AIC_EOSCR (AIC_BA+0x130)
+#define AIC_IPER (0x10C)
+#define AIC_ISNR (0x110)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-serial.h b/arch/arm/mach-nuc93x/include/mach/regs-serial.h
new file mode 100644
index 0000000..767a047
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-serial.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define UART0_BA NUC93X_VA_UART
+#define UART1_BA (NUC93X_VA_UART+0x100)
+
+#define UART0_PA NUC93X_PA_UART
+#define UART1_PA (NUC93X_PA_UART+0x100)
+
+
+#ifndef __ASSEMBLY__
+
+struct nuc93x_uart_clksrc {
+ const char *name;
+ unsigned int divisor;
+ unsigned int min_baud;
+ unsigned int max_baud;
+};
+
+struct nuc93x_uartcfg {
+ unsigned char hwport;
+ unsigned char unused;
+ unsigned short flags;
+ unsigned long uart_flags;
+
+ unsigned long ucon;
+ unsigned long ulcon;
+ unsigned long ufcon;
+
+ struct nuc93x_uart_clksrc *clocks;
+ unsigned int clocks_size;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-timer.h b/arch/arm/mach-nuc93x/include/mach/regs-timer.h
new file mode 100644
index 0000000..394be96
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-timer.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+/* Timer Registers */
+
+#define TMR_BA NUC93X_VA_TIMER
+#define REG_TCSR0 (TMR_BA+0x00)
+#define REG_TICR0 (TMR_BA+0x08)
+#define REG_TDR0 (TMR_BA+0x10)
+#define REG_TISR (TMR_BA+0x18)
+#define REG_WTCR (TMR_BA+0x1C)
+
+#endif /* __ASM_ARCH_REGS_TIMER_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/system.h b/arch/arm/mach-nuc93x/include/mach/system.h
new file mode 100644
index 0000000..d26bd9a
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/system.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/machnuc93x/include/mach/system.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <asm/proc-fns.h>
+
+static void arch_idle(void)
+{
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ cpu_reset(0);
+}
+
diff --git a/arch/arm/mach-nuc93x/include/mach/timex.h b/arch/arm/mach-nuc93x/include/mach/timex.h
new file mode 100644
index 0000000..0c719cc
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE Now, I don't use it. */
+
+#define CLOCK_TICK_RATE 27000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/uncompress.h b/arch/arm/mach-nuc93x/include/mach/uncompress.h
new file mode 100644
index 0000000..73082cd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/uncompress.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+/* Defines for UART registers */
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+#include <linux/serial_reg.h>
+
+#define arch_decomp_wdog()
+
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+static u32 * uart_base = (u32 *)UART0_PA;
+
+static void putc(int ch)
+{
+ /* Check THRE and TEMT bits before we transmit the character.
+ */
+ while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+ barrier();
+
+ *uart_base = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#endif/* __ASM_NUC93X_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/vmalloc.h b/arch/arm/mach-nuc93x/include/mach/vmalloc.h
new file mode 100644
index 0000000..98a21b8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/vmalloc.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-nuc93x/irq.c b/arch/arm/mach-nuc93x/irq.c
new file mode 100644
index 0000000..a7a88ea
--- /dev/null
+++ b/arch/arm/mach-nuc93x/irq.c
@@ -0,0 +1,66 @@
+/*
+ * linux/arch/arm/mach-nuc93x/irq.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+static void nuc93x_irq_mask(unsigned int irq)
+{
+ __raw_writel(1 << irq, REG_AIC_MDCR);
+}
+
+/*
+ * By the w90p910 spec,any irq,only write 1
+ * to REG_AIC_EOSCR for ACK
+ */
+
+static void nuc93x_irq_ack(unsigned int irq)
+{
+ __raw_writel(0x01, REG_AIC_EOSCR);
+}
+
+static void nuc93x_irq_unmask(unsigned int irq)
+{
+ __raw_writel(1 << irq, REG_AIC_MECR);
+
+}
+
+static struct irq_chip nuc93x_irq_chip = {
+ .ack = nuc93x_irq_ack,
+ .mask = nuc93x_irq_mask,
+ .unmask = nuc93x_irq_unmask,
+};
+
+void __init nuc93x_init_irq(void)
+{
+ int irqno;
+
+ __raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
+
+ for (irqno = IRQ_WDT; irqno <= NR_IRQS; irqno++) {
+ set_irq_chip(irqno, &nuc93x_irq_chip);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
new file mode 100644
index 0000000..9f79266
--- /dev/null
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc932.h"
+
+static void __init nuc932evb_map_io(void)
+{
+ nuc932_map_io();
+ nuc932_init_clocks();
+ nuc932_init_uartclk();
+}
+
+static void __init nuc932evb_init(void)
+{
+ nuc932_board_init();
+}
+
+MACHINE_START(NUC932EVB, "NUC932EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = NUC93X_PA_UART,
+ .io_pg_offst = (((u32)NUC93X_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc932evb_map_io,
+ .init_irq = nuc93x_init_irq,
+ .init_machine = nuc932evb_init,
+ .timer = &nuc93x_timer,
+MACHINE_END
diff --git a/arch/arm/mach-nuc93x/nuc932.c b/arch/arm/mach-nuc93x/nuc932.c
new file mode 100644
index 0000000..3966ead
--- /dev/null
+++ b/arch/arm/mach-nuc93x/nuc932.c
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/arm/mach-nuc93x/nuc932.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC932 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc932_dev[] __initdata = {
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc932evb_iodesc[] __initdata = {
+};
+
+/*Init NUC932 evb io*/
+
+void __init nuc932_map_io(void)
+{
+ nuc93x_map_io(nuc932evb_iodesc, ARRAY_SIZE(nuc932evb_iodesc));
+}
+
+/*Init NUC932 clock*/
+
+void __init nuc932_init_clocks(void)
+{
+ nuc93x_init_clocks();
+}
+
+/*enable NUC932 uart clock*/
+
+void __init nuc932_init_uartclk(void)
+{
+ struct clk *ck_uart = clk_get(NULL, "uart");
+ BUG_ON(IS_ERR(ck_uart));
+
+ clk_enable(ck_uart);
+}
+
+/*Init NUC932 board info*/
+
+void __init nuc932_board_init(void)
+{
+ nuc93x_board_init(nuc932_dev, ARRAY_SIZE(nuc932_dev));
+}
diff --git a/arch/arm/mach-nuc93x/nuc932.h b/arch/arm/mach-nuc93x/nuc932.h
new file mode 100644
index 0000000..9a66edd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/nuc932.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-nuc93x/nuc932.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC93x CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc93x_init_irq(void);
+extern struct sys_timer nuc93x_timer;
+
+/* extern file from nuc932.c */
+
+extern void nuc932_board_init(void);
+extern void nuc932_init_clocks(void);
+extern void nuc932_map_io(void);
+extern void nuc932_init_uartclk(void);
diff --git a/arch/arm/mach-nuc93x/time.c b/arch/arm/mach-nuc93x/time.c
new file mode 100644
index 0000000..2f90f9d
--- /dev/null
+++ b/arch/arm/mach-nuc93x/time.c
@@ -0,0 +1,100 @@
+/*
+ * linux/arch/arm/mach-nuc93x/time.c
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <mach/system.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define RESETINT 0x01
+#define PERIOD (0x01 << 27)
+#define ONESHOT (0x00 << 27)
+#define COUNTEN (0x01 << 30)
+#define INTEN (0x01 << 29)
+
+#define TICKS_PER_SEC 100
+#define PRESCALE 0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static unsigned long nuc93x_gettimeoffset(void)
+{
+ return 0;
+}
+
+/*IRQ handler for the timer*/
+
+static irqreturn_t nuc93x_timer_interrupt(int irq, void *dev_id)
+{
+ timer_tick();
+ __raw_writel(0x01, REG_TISR); /* clear TIF0 */
+ return IRQ_HANDLED;
+}
+
+static struct irqaction nuc93x_timer_irq = {
+ .name = "nuc93x Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = nuc93x_timer_interrupt,
+};
+
+/*Set up timer reg.*/
+
+static void nuc93x_timer_setup(void)
+{
+ struct clk *ck_ext = clk_get(NULL, "ext");
+ struct clk *ck_timer = clk_get(NULL, "timer");
+ unsigned int rate, val = 0;
+
+ BUG_ON(IS_ERR(ck_ext) || IS_ERR(ck_timer));
+
+ clk_enable(ck_timer);
+ rate = clk_get_rate(ck_ext);
+ clk_put(ck_ext);
+ rate = rate / (PRESCALE + 0x01);
+
+ /* set a known state */
+ __raw_writel(0x00, REG_TCSR0);
+ __raw_writel(RESETINT, REG_TISR);
+
+ timer0_load = (rate / TICKS_PER_SEC);
+ __raw_writel(timer0_load, REG_TICR0);
+
+ val |= (PERIOD | COUNTEN | INTEN | PRESCALE);;
+ __raw_writel(val, REG_TCSR0);
+
+}
+
+static void __init nuc93x_timer_init(void)
+{
+ nuc93x_timer_setup();
+ setup_irq(IRQ_TIMER0, &nuc93x_timer_irq);
+}
+
+struct sys_timer nuc93x_timer = {
+ .init = nuc93x_timer_init,
+ .offset = nuc93x_gettimeoffset,
+ .resume = nuc93x_timer_setup
+};
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index aedb746..8c74cab 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xff000000 @ physical base address
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index e9f255d..86979d7 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
#ifdef CONFIG_ARCH_OMAP2
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index c7f808bf..91e0e39 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
#include <mach/orion5x.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =ORION5X_REGS_PHYS_BASE
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 6d1407f..6ca8bd3 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
mov \rx, #0x00090000
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 55d6a17..01cf813 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include "hardware.h"
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x40000000 @ physical
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 932d8af..8662228 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,7 +33,7 @@
#error "Unknown RealView platform"
#endif
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index b2a939ff..6fc8d66 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x03000000
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 4c29a89..0eef78b 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C24XX_PA_UART
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 547d4fc..2068e90 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -288,7 +288,7 @@
/* DM9000AEP 10/100 ethernet controller */
-static struct resource mini2440_dm9k_resource[] __initdata = {
+static struct resource mini2440_dm9k_resource[] = {
[0] = {
.start = MACH_MINI2440_DM9K_BASE,
.end = MACH_MINI2440_DM9K_BASE + 3,
@@ -310,11 +310,11 @@
* The DM9000 has no eeprom, and it's MAC address is set by
* the bootloader before starting the kernel.
*/
-static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = {
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
-static struct platform_device mini2440_device_eth __initdata = {
+static struct platform_device mini2440_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
@@ -341,7 +341,7 @@
* | | +----+ +----+
* .....
*/
-static struct gpio_keys_button mini2440_buttons[] __initdata = {
+static struct gpio_keys_button mini2440_buttons[] = {
{
.gpio = S3C2410_GPG(0), /* K1 */
.code = KEY_F1,
@@ -384,12 +384,12 @@
#endif
};
-static struct gpio_keys_platform_data mini2440_button_data __initdata = {
+static struct gpio_keys_platform_data mini2440_button_data = {
.buttons = mini2440_buttons,
.nbuttons = ARRAY_SIZE(mini2440_buttons),
};
-static struct platform_device mini2440_button_device __initdata = {
+static struct platform_device mini2440_button_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
@@ -399,41 +399,41 @@
/* LEDS */
-static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
.name = "led1",
.gpio = S3C2410_GPB(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "heartbeat",
};
-static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
.name = "led2",
.gpio = S3C2410_GPB(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "nand-disk",
};
-static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
.name = "led3",
.gpio = S3C2410_GPB(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "mmc0",
};
-static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
.name = "led4",
.gpio = S3C2410_GPB(8),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "",
};
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
.name = "backlight",
.gpio = S3C2410_GPG(4),
.def_trigger = "backlight",
};
-static struct platform_device mini2440_led1 __initdata = {
+static struct platform_device mini2440_led1 = {
.name = "s3c24xx_led",
.id = 1,
.dev = {
@@ -441,7 +441,7 @@
},
};
-static struct platform_device mini2440_led2 __initdata = {
+static struct platform_device mini2440_led2 = {
.name = "s3c24xx_led",
.id = 2,
.dev = {
@@ -449,7 +449,7 @@
},
};
-static struct platform_device mini2440_led3 __initdata = {
+static struct platform_device mini2440_led3 = {
.name = "s3c24xx_led",
.id = 3,
.dev = {
@@ -457,7 +457,7 @@
},
};
-static struct platform_device mini2440_led4 __initdata = {
+static struct platform_device mini2440_led4 = {
.name = "s3c24xx_led",
.id = 4,
.dev = {
@@ -465,7 +465,7 @@
},
};
-static struct platform_device mini2440_led_backlight __initdata = {
+static struct platform_device mini2440_led_backlight = {
.name = "s3c24xx_led",
.id = 5,
.dev = {
@@ -475,14 +475,14 @@
/* AUDIO */
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = {
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
.l3_clk = S3C2410_GPB(4),
.l3_mode = S3C2410_GPB(2),
.l3_data = S3C2410_GPB(3),
.model = UDA134X_UDA1341
};
-static struct platform_device mini2440_audio __initdata = {
+static struct platform_device mini2440_audio = {
.name = "s3c24xx_uda134x",
.id = 0,
.dev = {
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
index f0ef0ab..239476b 100644
--- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C24XX_PA_UART
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
index b18ac52..5c88875 100644
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 480d297..8969fe7 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -211,6 +211,7 @@
.supply_name = "B_PWR_5V",
.microvolts = 5000000,
.init_data = &smdk6410_b_pwr_5v_data,
+ .gpio = -EINVAL,
};
static struct platform_device smdk6410_b_pwr_5v = {
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 9d142cc..e181f57 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 1f0634d..336adcc 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <mach/hardware.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical base address
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index f97a762..50f071c 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mov \rx, #0xe0000000
orr \rx, \rx, #0x000003f8
.endm
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 111f7ea..36ffd6a 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -610,34 +610,34 @@
static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
{
- if (rate >= 18900000)
+ if (rate <= 18900000)
return 18900000;
- if (rate >= 20800000)
+ if (rate <= 20800000)
return 20800000;
- if (rate >= 23100000)
+ if (rate <= 23100000)
return 23100000;
- if (rate >= 26000000)
+ if (rate <= 26000000)
return 26000000;
- if (rate >= 29700000)
+ if (rate <= 29700000)
return 29700000;
- if (rate >= 34700000)
+ if (rate <= 34700000)
return 34700000;
- if (rate >= 41600000)
+ if (rate <= 41600000)
return 41600000;
- if (rate >= 52000000)
+ if (rate <= 52000000)
return 52000000;
return -EINVAL;
}
static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
{
- if (rate >= 13000000)
+ if (rate <= 13000000)
return 13000000;
- if (rate >= 52000000)
+ if (rate <= 52000000)
return 52000000;
- if (rate >= 104000000)
+ if (rate <= 104000000)
return 104000000;
- if (rate >= 208000000)
+ if (rate <= 208000000)
return 208000000;
return -EINVAL;
}
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 653e25b..01b5031 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -3,7 +3,7 @@
* arch/arm/mach-u300/core.c
*
*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2010 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Core platform support, IRQ handling and device definitions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -19,6 +19,7 @@
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <mach/coh901318.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -29,6 +30,7 @@
#include <mach/hardware.h>
#include <mach/syscon.h>
+#include <mach/dma_channels.h>
#include "clock.h"
#include "mmc.h"
@@ -372,8 +374,1019 @@
},
};
+static struct resource dma_resource[] = {
+ {
+ .start = U300_DMAC_BASE,
+ .end = U300_DMAC_BASE + PAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_DMA,
+ .end = IRQ_U300_DMA,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+/* points out all dma slave channels.
+ * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
+ * Select all channels from A to B, end of list is marked with -1,-1
+ */
+static int dma_slave_channels[] = {
+ U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
+ U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
+
+/* points out all dma memcpy channels. */
+static int dma_memcpy_channels[] = {
+ U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
+
+#else /* CONFIG_MACH_U300_BS335 */
+
+static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1};
+static int dma_memcpy_channels[] = {
+ U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1};
+
+#endif
+
+/** register dma for memory access
+ *
+ * active 1 means dma intends to access memory
+ * 0 means dma wont access memory
+ */
+static void coh901318_access_memory_state(struct device *dev, bool active)
+{
+}
+
+#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
+ COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
+ COH901318_CX_CFG_LCR_DISABLE | \
+ COH901318_CX_CFG_TC_IRQ_ENABLE | \
+ COH901318_CX_CFG_BE_IRQ_ENABLE)
+#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_DISABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_DISABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_ENABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+
+const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
+ {
+ .number = U300_DMA_MSL_TX_0,
+ .name = "MSL TX 0",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_TX_1,
+ .name = "MSL TX 1",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_2,
+ .name = "MSL TX 2",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .desc_nbr_max = 10,
+ },
+ {
+ .number = U300_DMA_MSL_TX_3,
+ .name = "MSL TX 3",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_4,
+ .name = "MSL TX 4",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_5,
+ .name = "MSL TX 5",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_TX_6,
+ .name = "MSL TX 6",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_RX_0,
+ .name = "MSL RX 0",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
+ },
+ {
+ .number = U300_DMA_MSL_RX_1,
+ .name = "MSL RX 1",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_2,
+ .name = "MSL RX 2",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_3,
+ .name = "MSL RX 3",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_4,
+ .name = "MSL RX 4",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_5,
+ .name = "MSL RX 5",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_6,
+ .name = "MSL RX 6",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
+ },
+ {
+ .number = U300_DMA_MMCSD_RX_TX,
+ .name = "MMCSD RX TX",
+ .priority_high = 0,
+ .dev_addr = U300_MMCSD_BASE + 0x080,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+
+ },
+ {
+ .number = U300_DMA_MSPRO_TX,
+ .name = "MSPRO TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_MSPRO_RX,
+ .name = "MSPRO RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART0_TX,
+ .name = "UART0 TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART0_RX,
+ .name = "UART0 RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_APEX_TX,
+ .name = "APEX TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_APEX_RX,
+ .name = "APEX RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_PCM_I2S0_TX,
+ .name = "PCM I2S0 TX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S0_BASE + 0x14,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_PCM_I2S0_RX,
+ .name = "PCM I2S0 RX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S0_BASE + 0x10,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_PCM_I2S1_TX,
+ .name = "PCM I2S1 TX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S1_BASE + 0x14,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_PCM_I2S1_RX,
+ .name = "PCM I2S1 RX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S1_BASE + 0x10,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_XGAM_CDI,
+ .name = "XGAM CDI",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_XGAM_PDI,
+ .name = "XGAM PDI",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_SPI_TX,
+ .name = "SPI TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_SPI_RX,
+ .name = "SPI RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_0,
+ .name = "GENERAL 00",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_1,
+ .name = "GENERAL 01",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_2,
+ .name = "GENERAL 02",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_3,
+ .name = "GENERAL 03",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_4,
+ .name = "GENERAL 04",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_5,
+ .name = "GENERAL 05",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_6,
+ .name = "GENERAL 06",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_7,
+ .name = "GENERAL 07",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_8,
+ .name = "GENERAL 08",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+#ifdef CONFIG_MACH_U300_BS335
+ {
+ .number = U300_DMA_UART1_TX,
+ .name = "UART1 TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART1_RX,
+ .name = "UART1 RX",
+ .priority_high = 0,
+ }
+#else
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_9,
+ .name = "GENERAL 09",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_10,
+ .name = "GENERAL 10",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ }
+#endif
+};
+
+
+static struct coh901318_platform coh901318_platform = {
+ .chans_slave = dma_slave_channels,
+ .chans_memcpy = dma_memcpy_channels,
+ .access_memory_state = coh901318_access_memory_state,
+ .chan_conf = chan_config,
+ .max_channels = U300_DMA_CHANNELS,
+};
+
static struct platform_device wdog_device = {
- .name = "wdog",
+ .name = "coh901327_wdog",
.id = -1,
.num_resources = ARRAY_SIZE(wdog_resources),
.resource = wdog_resources,
@@ -428,11 +1441,23 @@
.resource = ave_resources,
};
+static struct platform_device dma_device = {
+ .name = "coh901318",
+ .id = -1,
+ .resource = dma_resource,
+ .num_resources = ARRAY_SIZE(dma_resource),
+ .dev = {
+ .platform_data = &coh901318_platform,
+ .coherent_dma_mask = ~0,
+ },
+};
+
/*
* Notice that AMBA devices are initialized before platform devices.
*
*/
static struct platform_device *platform_devs[] __initdata = {
+ &dma_device,
&i2c0_device,
&i2c1_device,
&keypad_device,
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 0b35826..5f61fd4 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -546,7 +546,7 @@
for (i = 0; i < U300_GPIO_MAX; i++) {
val = 0;
for (j = 0; j < 8; j++)
- val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+ val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
local_irq_save(flags);
writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
local_irq_restore(flags);
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index f3a1cbb..ca4a028 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*/
#include <mach/hardware.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
/* If we move the adress using MMU, use this. */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/include/mach/dma_channels.h
new file mode 100644
index 0000000..b239149
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/dma_channels.h
@@ -0,0 +1,69 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/dma_channels.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Map file for the U300 dma driver.
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#ifndef DMA_CHANNELS_H
+#define DMA_CHANNELS_H
+
+#define U300_DMA_MSL_TX_0 0
+#define U300_DMA_MSL_TX_1 1
+#define U300_DMA_MSL_TX_2 2
+#define U300_DMA_MSL_TX_3 3
+#define U300_DMA_MSL_TX_4 4
+#define U300_DMA_MSL_TX_5 5
+#define U300_DMA_MSL_TX_6 6
+#define U300_DMA_MSL_RX_0 7
+#define U300_DMA_MSL_RX_1 8
+#define U300_DMA_MSL_RX_2 9
+#define U300_DMA_MSL_RX_3 10
+#define U300_DMA_MSL_RX_4 11
+#define U300_DMA_MSL_RX_5 12
+#define U300_DMA_MSL_RX_6 13
+#define U300_DMA_MMCSD_RX_TX 14
+#define U300_DMA_MSPRO_TX 15
+#define U300_DMA_MSPRO_RX 16
+#define U300_DMA_UART0_TX 17
+#define U300_DMA_UART0_RX 18
+#define U300_DMA_APEX_TX 19
+#define U300_DMA_APEX_RX 20
+#define U300_DMA_PCM_I2S0_TX 21
+#define U300_DMA_PCM_I2S0_RX 22
+#define U300_DMA_PCM_I2S1_TX 23
+#define U300_DMA_PCM_I2S1_RX 24
+#define U300_DMA_XGAM_CDI 25
+#define U300_DMA_XGAM_PDI 26
+#define U300_DMA_SPI_TX 27
+#define U300_DMA_SPI_RX 28
+#define U300_DMA_GENERAL_PURPOSE_0 29
+#define U300_DMA_GENERAL_PURPOSE_1 30
+#define U300_DMA_GENERAL_PURPOSE_2 31
+#define U300_DMA_GENERAL_PURPOSE_3 32
+#define U300_DMA_GENERAL_PURPOSE_4 33
+#define U300_DMA_GENERAL_PURPOSE_5 34
+#define U300_DMA_GENERAL_PURPOSE_6 35
+#define U300_DMA_GENERAL_PURPOSE_7 36
+#define U300_DMA_GENERAL_PURPOSE_8 37
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_DMA_UART1_TX 38
+#define U300_DMA_UART1_RX 39
+#else
+#define U300_DMA_GENERAL_PURPOSE_9 38
+#define U300_DMA_GENERAL_PURPOSE_10 39
+#endif
+
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_DMA_DEVICE_CHANNELS 32
+#else
+#define U300_DMA_DEVICE_CHANNELS 30
+#endif
+#define U300_DMA_CHANNELS 40
+
+
+#endif /* DMA_CHANNELS_H */
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index aa5afbc..803aec1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -22,6 +22,7 @@
#include <asm/mach/arch.h>
#include <plat/mtu.h>
+#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/setup.h>
@@ -108,11 +109,96 @@
.periphid = SSP_PER_ID,
};
+static struct amba_device pl031_device = {
+ .dev = {
+ .init_name = "pl031",
+ },
+ .res = {
+ .start = U8500_RTC_BASE,
+ .end = U8500_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_RTC_RTT, NO_IRQ},
+};
+
+#define U8500_I2C_RESOURCES(id, size) \
+static struct resource u8500_i2c_resources_##id[] = { \
+ [0] = { \
+ .start = U8500_I2C##id##_BASE, \
+ .end = U8500_I2C##id##_BASE + size - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ [1] = { \
+ .start = IRQ_I2C##id, \
+ .end = IRQ_I2C##id, \
+ .flags = IORESOURCE_IRQ \
+ } \
+}
+
+U8500_I2C_RESOURCES(0, SZ_4K);
+U8500_I2C_RESOURCES(1, SZ_4K);
+U8500_I2C_RESOURCES(2, SZ_4K);
+U8500_I2C_RESOURCES(3, SZ_4K);
+
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+static struct nmk_i2c_controller u8500_i2c_##id = { \
+ /* \
+ * slave data setup time, which is \
+ * 250 ns,100ns,10ns which is 14,6,2 \
+ * respectively for a 48 Mhz \
+ * i2c clock \
+ */ \
+ .slsu = _slsu, \
+ /* Tx FIFO threshold */ \
+ .tft = _tft, \
+ /* Rx FIFO threshold */ \
+ .rft = _rft, \
+ /* std. mode operation */ \
+ .clk_freq = clk, \
+ .sm = _sm, \
+}
+
+/*
+ * The board uses 4 i2c controllers, initialize all of
+ * them with slave data setup time of 250 ns,
+ * Tx & Rx FIFO threshold values as 1 and standard
+ * mode of operation
+ */
+U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+
+#define U8500_I2C_PDEVICE(cid) \
+static struct platform_device i2c_controller##cid = { \
+ .name = "nmk-i2c", \
+ .id = cid, \
+ .num_resources = 2, \
+ .resource = u8500_i2c_resources_##cid, \
+ .dev = { \
+ .platform_data = &u8500_i2c_##cid \
+ } \
+}
+
+U8500_I2C_PDEVICE(0);
+U8500_I2C_PDEVICE(1);
+U8500_I2C_PDEVICE(2);
+U8500_I2C_PDEVICE(3);
+
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
&uart1_device,
&uart2_device,
&pl022_device,
+ &pl031_device,
+};
+
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+ &i2c_controller0,
+ &i2c_controller1,
+ &i2c_controller2,
+ &i2c_controller3,
};
static void __init u8500_timer_init(void)
@@ -139,6 +225,8 @@
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
spi_register_board_info(u8500_spi_devices,
ARRAY_SIZE(u8500_spi_devices));
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
index 5f05e58..397bc1f 100644
--- a/arch/arm/mach-ux500/cpu-u8500.c
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -33,6 +33,7 @@
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 8f21b6a..09cbfda 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -8,12 +8,13 @@
* published by the Free Software Foundation.
*
*/
- .macro addruart,rx
+#include <mach/hardware.h>
+
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @MMU enabled?
- moveq \rx, #0x80000000 @MMU off, Physical address
- movne \rx, #0xF0000000 @MMU on, Virtual address
- orr \rx, \rx, #0x7000
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =U8500_UART2_BASE @ no, physical address
+ ldrne \rx, =IO_ADDRESS(U8500_UART2_BASE) @ yes, virtual address
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index b4ac00e..6fea719 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 20dc0c9..e44b0a0 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -45,6 +45,7 @@
IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(EBI),
+ IODESC_ENT(GPIO),
};
/* Initial clock declarations. */
@@ -68,6 +69,11 @@
static DEFINE_CLK(adc, 28);
static DEFINE_CLK(usi, 29);
static DEFINE_CLK(ext, 0);
+static DEFINE_CLK(timer0, 19);
+static DEFINE_CLK(timer1, 20);
+static DEFINE_CLK(timer2, 21);
+static DEFINE_CLK(timer3, 22);
+static DEFINE_CLK(timer4, 23);
static struct clk_lookup nuc900_clkregs[] = {
DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
@@ -90,6 +96,11 @@
DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+ DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
+ DEF_CLKLOOK(&clk_timer1, NULL, "timer1"),
+ DEF_CLKLOOK(&clk_timer2, NULL, "timer2"),
+ DEF_CLKLOOK(&clk_timer3, NULL, "timer3"),
+ DEF_CLKLOOK(&clk_timer4, NULL, "timer4"),
};
/* Initial serial platform data */
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index a89444a..7148e53 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -157,7 +157,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(fa_dma_inv_range)
+fa_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry
@@ -180,7 +180,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(fa_dma_clean_range)
+fa_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -205,6 +205,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(fa_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq fa_dma_clean_range
+ bcs fa_dma_inv_range
+ b fa_dma_flush_range
+ENDPROC(fa_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(fa_dma_unmap_area)
+ mov pc, lr
+ENDPROC(fa_dma_unmap_area)
+
__INITDATA
.type fa_cache_fns, #object
@@ -215,7 +239,7 @@
.long fa_coherent_kern_range
.long fa_coherent_user_range
.long fa_flush_kern_dcache_area
- .long fa_dma_inv_range
- .long fa_dma_clean_range
+ .long fa_dma_map_area
+ .long fa_dma_unmap_area
.long fa_dma_flush_range
.size fa_cache_fns, . - fa_cache_fns
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index 2a48273..c2ff3c5 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -84,20 +84,6 @@
/* FALLTHROUGH */
/*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v3_dma_inv_range)
- /* FALLTHROUGH */
-
-/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@@ -108,18 +94,29 @@
ENTRY(v3_dma_flush_range)
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ flush ID cache
+ mov pc, lr
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v3_dma_unmap_area)
+ teq r2, #DMA_TO_DEVICE
+ bne v3_dma_flush_range
/* FALLTHROUGH */
/*
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
*/
-ENTRY(v3_dma_clean_range)
+ENTRY(v3_dma_map_area)
mov pc, lr
+ENDPROC(v3_dma_unmap_area)
+ENDPROC(v3_dma_map_area)
__INITDATA
@@ -131,7 +128,7 @@
.long v3_coherent_kern_range
.long v3_coherent_user_range
.long v3_flush_kern_dcache_area
- .long v3_dma_inv_range
- .long v3_dma_clean_range
+ .long v3_dma_map_area
+ .long v3_dma_unmap_area
.long v3_dma_flush_range
.size v3_cache_fns, . - v3_cache_fns
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 5c7da3e..4810f7e 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -94,20 +94,6 @@
/* FALLTHROUGH */
/*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v4_dma_inv_range)
- /* FALLTHROUGH */
-
-/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@@ -120,18 +106,29 @@
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ flush ID cache
#endif
+ mov pc, lr
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4_dma_unmap_area)
+ teq r2, #DMA_TO_DEVICE
+ bne v4_dma_flush_range
/* FALLTHROUGH */
/*
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
*/
-ENTRY(v4_dma_clean_range)
+ENTRY(v4_dma_map_area)
mov pc, lr
+ENDPROC(v4_dma_unmap_area)
+ENDPROC(v4_dma_map_area)
__INITDATA
@@ -143,7 +140,7 @@
.long v4_coherent_kern_range
.long v4_coherent_user_range
.long v4_flush_kern_dcache_area
- .long v4_dma_inv_range
- .long v4_dma_clean_range
+ .long v4_dma_map_area
+ .long v4_dma_unmap_area
.long v4_dma_flush_range
.size v4_cache_fns, . - v4_cache_fns
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index 3dbedf1e..df8368a 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -173,7 +173,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wb_dma_inv_range)
+v4wb_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -194,7 +194,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wb_dma_clean_range)
+v4wb_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -216,6 +216,30 @@
.globl v4wb_dma_flush_range
.set v4wb_dma_flush_range, v4wb_coherent_kern_range
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wb_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq v4wb_dma_clean_range
+ bcs v4wb_dma_inv_range
+ b v4wb_dma_flush_range
+ENDPROC(v4wb_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wb_dma_unmap_area)
+ mov pc, lr
+ENDPROC(v4wb_dma_unmap_area)
+
__INITDATA
.type v4wb_cache_fns, #object
@@ -226,7 +250,7 @@
.long v4wb_coherent_kern_range
.long v4wb_coherent_user_range
.long v4wb_flush_kern_dcache_area
- .long v4wb_dma_inv_range
- .long v4wb_dma_clean_range
+ .long v4wb_dma_map_area
+ .long v4wb_dma_unmap_area
.long v4wb_dma_flush_range
.size v4wb_cache_fns, . - v4wb_cache_fns
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index b3b7410..45c7031 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -142,23 +142,12 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wt_dma_inv_range)
+v4wt_dma_inv_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
- /* FALLTHROUGH */
-
-/*
- * dma_clean_range(start, end)
- *
- * Clean the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v4wt_dma_clean_range)
mov pc, lr
/*
@@ -172,6 +161,29 @@
.globl v4wt_dma_flush_range
.equ v4wt_dma_flush_range, v4wt_dma_inv_range
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wt_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v4wt_dma_inv_range
+ /* FALLTHROUGH */
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wt_dma_map_area)
+ mov pc, lr
+ENDPROC(v4wt_dma_unmap_area)
+ENDPROC(v4wt_dma_map_area)
+
__INITDATA
.type v4wt_cache_fns, #object
@@ -182,7 +194,7 @@
.long v4wt_coherent_kern_range
.long v4wt_coherent_user_range
.long v4wt_flush_kern_dcache_area
- .long v4wt_dma_inv_range
- .long v4wt_dma_clean_range
+ .long v4wt_dma_map_area
+ .long v4wt_dma_unmap_area
.long v4wt_dma_flush_range
.size v4wt_cache_fns, . - v4wt_cache_fns
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 4ba0a24..9d89c67 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -195,7 +195,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v6_dma_inv_range)
+v6_dma_inv_range:
tst r0, #D_CACHE_LINE_SIZE - 1
bic r0, r0, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
@@ -228,7 +228,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v6_dma_clean_range)
+v6_dma_clean_range:
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
#ifdef HARVARD_CACHE
@@ -263,6 +263,32 @@
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v6_dma_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_FROM_DEVICE
+ beq v6_dma_inv_range
+ b v6_dma_clean_range
+ENDPROC(v6_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v6_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v6_dma_inv_range
+ mov pc, lr
+ENDPROC(v6_dma_unmap_area)
+
__INITDATA
.type v6_cache_fns, #object
@@ -273,7 +299,7 @@
.long v6_coherent_kern_range
.long v6_coherent_user_range
.long v6_flush_kern_dcache_area
- .long v6_dma_inv_range
- .long v6_dma_clean_range
+ .long v6_dma_map_area
+ .long v6_dma_unmap_area
.long v6_dma_flush_range
.size v6_cache_fns, . - v6_cache_fns
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 9073db8..bcd64f2 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -216,7 +216,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v7_dma_inv_range)
+v7_dma_inv_range:
dcache_line_size r2, r3
sub r3, r2, #1
tst r0, r3
@@ -240,7 +240,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v7_dma_clean_range)
+v7_dma_clean_range:
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
@@ -271,6 +271,32 @@
mov pc, lr
ENDPROC(v7_dma_flush_range)
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v7_dma_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_FROM_DEVICE
+ beq v7_dma_inv_range
+ b v7_dma_clean_range
+ENDPROC(v7_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v7_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v7_dma_inv_range
+ mov pc, lr
+ENDPROC(v7_dma_unmap_area)
+
__INITDATA
.type v7_cache_fns, #object
@@ -281,7 +307,7 @@
.long v7_coherent_kern_range
.long v7_coherent_user_range
.long v7_flush_kern_dcache_area
- .long v7_dma_inv_range
- .long v7_dma_clean_range
+ .long v7_dma_map_area
+ .long v7_dma_unmap_area
.long v7_dma_flush_range
.size v7_cache_fns, . - v7_cache_fns
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index 70997d5..5eb4fd9 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -68,12 +68,13 @@
}
void feroceon_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
feroceon_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c
index de9c068..f72303e 100644
--- a/arch/arm/mm/copypage-v3.c
+++ b/arch/arm/mm/copypage-v3.c
@@ -38,7 +38,7 @@
}
void v3_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 7370a71..598c51a 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -69,7 +69,7 @@
}
void v4_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto = kmap_atomic(to, KM_USER1);
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
index 9ab0984..7c2eb55 100644
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -48,12 +48,13 @@
}
void v4wb_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
v4wb_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
index 300efaf..172e6a5 100644
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -44,7 +44,7 @@
}
void v4wt_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 0fa1319..8bca4de 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -34,7 +34,7 @@
* attack the kernel's existing mapping of these pages.
*/
static void v6_copy_user_highpage_nonaliasing(struct page *to,
- struct page *from, unsigned long vaddr)
+ struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
@@ -81,7 +81,7 @@
* Copy the page, taking account of the cache colour.
*/
static void v6_copy_user_highpage_aliasing(struct page *to,
- struct page *from, unsigned long vaddr)
+ struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
{
unsigned int offset = CACHE_COLOUR(vaddr);
unsigned long kfrom, kto;
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index bc4525f..747ad41 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -71,12 +71,13 @@
}
void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
xsc3_mc_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 76824d3..9920c0a 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -91,7 +91,7 @@
}
void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto = kmap_atomic(to, KM_USER1);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 48eedab..0da7ecc 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -401,78 +401,44 @@
* platforms with CONFIG_DMABOUNCE.
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
*/
-void dma_cache_maint(const void *start, size_t size, int direction)
+void ___dma_single_cpu_to_dev(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
{
- void (*inner_op)(const void *, const void *);
- void (*outer_op)(unsigned long, unsigned long);
-
- BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
-
- switch (direction) {
- case DMA_FROM_DEVICE: /* invalidate only */
- inner_op = dmac_inv_range;
- outer_op = outer_inv_range;
- break;
- case DMA_TO_DEVICE: /* writeback only */
- inner_op = dmac_clean_range;
- outer_op = outer_clean_range;
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- inner_op = dmac_flush_range;
- outer_op = outer_flush_range;
- break;
- default:
- BUG();
- }
-
- inner_op(start, start + size);
- outer_op(__pa(start), __pa(start) + size);
-}
-EXPORT_SYMBOL(dma_cache_maint);
-
-static void dma_cache_maint_contiguous(struct page *page, unsigned long offset,
- size_t size, int direction)
-{
- void *vaddr;
unsigned long paddr;
- void (*inner_op)(const void *, const void *);
- void (*outer_op)(unsigned long, unsigned long);
- switch (direction) {
- case DMA_FROM_DEVICE: /* invalidate only */
- inner_op = dmac_inv_range;
- outer_op = outer_inv_range;
- break;
- case DMA_TO_DEVICE: /* writeback only */
- inner_op = dmac_clean_range;
- outer_op = outer_clean_range;
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- inner_op = dmac_flush_range;
- outer_op = outer_flush_range;
- break;
- default:
- BUG();
- }
+ BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
- if (!PageHighMem(page)) {
- vaddr = page_address(page) + offset;
- inner_op(vaddr, vaddr + size);
+ dmac_map_area(kaddr, size, dir);
+
+ paddr = __pa(kaddr);
+ if (dir == DMA_FROM_DEVICE) {
+ outer_inv_range(paddr, paddr + size);
} else {
- vaddr = kmap_high_get(page);
- if (vaddr) {
- vaddr += offset;
- inner_op(vaddr, vaddr + size);
- kunmap_high(page);
- }
+ outer_clean_range(paddr, paddr + size);
+ }
+ /* FIXME: non-speculating: flush on bidirectional mappings? */
+}
+EXPORT_SYMBOL(___dma_single_cpu_to_dev);
+
+void ___dma_single_dev_to_cpu(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
+
+ /* FIXME: non-speculating: not required */
+ /* don't bother invalidating if DMA to device */
+ if (dir != DMA_TO_DEVICE) {
+ unsigned long paddr = __pa(kaddr);
+ outer_inv_range(paddr, paddr + size);
}
- paddr = page_to_phys(page) + offset;
- outer_op(paddr, paddr + size);
+ dmac_unmap_area(kaddr, size, dir);
}
+EXPORT_SYMBOL(___dma_single_dev_to_cpu);
-void dma_cache_maint_page(struct page *page, unsigned long offset,
- size_t size, int dir)
+static void dma_cache_maint_page(struct page *page, unsigned long offset,
+ size_t size, enum dma_data_direction dir,
+ void (*op)(const void *, size_t, int))
{
/*
* A single sg entry may refer to multiple physically contiguous
@@ -483,20 +449,62 @@
size_t left = size;
do {
size_t len = left;
- if (PageHighMem(page) && len + offset > PAGE_SIZE) {
- if (offset >= PAGE_SIZE) {
- page += offset / PAGE_SIZE;
- offset %= PAGE_SIZE;
+ void *vaddr;
+
+ if (PageHighMem(page)) {
+ if (len + offset > PAGE_SIZE) {
+ if (offset >= PAGE_SIZE) {
+ page += offset / PAGE_SIZE;
+ offset %= PAGE_SIZE;
+ }
+ len = PAGE_SIZE - offset;
}
- len = PAGE_SIZE - offset;
+ vaddr = kmap_high_get(page);
+ if (vaddr) {
+ vaddr += offset;
+ op(vaddr, len, dir);
+ kunmap_high(page);
+ }
+ } else {
+ vaddr = page_address(page) + offset;
+ op(vaddr, len, dir);
}
- dma_cache_maint_contiguous(page, offset, len, dir);
offset = 0;
page++;
left -= len;
} while (left);
}
-EXPORT_SYMBOL(dma_cache_maint_page);
+
+void ___dma_page_cpu_to_dev(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ unsigned long paddr;
+
+ dma_cache_maint_page(page, off, size, dir, dmac_map_area);
+
+ paddr = page_to_phys(page) + off;
+ if (dir == DMA_FROM_DEVICE) {
+ outer_inv_range(paddr, paddr + size);
+ } else {
+ outer_clean_range(paddr, paddr + size);
+ }
+ /* FIXME: non-speculating: flush on bidirectional mappings? */
+}
+EXPORT_SYMBOL(___dma_page_cpu_to_dev);
+
+void ___dma_page_dev_to_cpu(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ unsigned long paddr = page_to_phys(page) + off;
+
+ /* FIXME: non-speculating: not required */
+ /* don't bother invalidating if DMA to device */
+ if (dir != DMA_TO_DEVICE)
+ outer_inv_range(paddr, paddr + size);
+
+ dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
+}
+EXPORT_SYMBOL(___dma_page_dev_to_cpu);
/**
* dma_map_sg - map a set of SG buffers for streaming mode DMA
@@ -570,8 +578,12 @@
int i;
for_each_sg(sg, s, nents, i) {
- dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
- sg_dma_len(s), dir);
+ if (!dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
+ sg_dma_len(s), dir))
+ continue;
+
+ __dma_page_dev_to_cpu(sg_page(s), s->offset,
+ s->length, dir);
}
}
EXPORT_SYMBOL(dma_sync_sg_for_cpu);
@@ -594,9 +606,8 @@
sg_dma_len(s), dir))
continue;
- if (!arch_is_coherent())
- dma_cache_maint_page(sg_page(s), s->offset,
- s->length, dir);
+ __dma_page_cpu_to_dev(sg_page(s), s->offset,
+ s->length, dir);
}
}
EXPORT_SYMBOL(dma_sync_sg_for_device);
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 56ee153..c9b97e9 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -36,28 +36,12 @@
* Therefore those configurations which might call adjust_pte (those
* without CONFIG_CPU_CACHE_VIPT) cannot support split page_table_lock.
*/
-static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
+static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address,
+ unsigned long pfn, pte_t *ptep)
{
- pgd_t *pgd;
- pmd_t *pmd;
- pte_t *pte, entry;
+ pte_t entry = *ptep;
int ret;
- pgd = pgd_offset(vma->vm_mm, address);
- if (pgd_none(*pgd))
- goto no_pgd;
- if (pgd_bad(*pgd))
- goto bad_pgd;
-
- pmd = pmd_offset(pgd, address);
- if (pmd_none(*pmd))
- goto no_pmd;
- if (pmd_bad(*pmd))
- goto bad_pmd;
-
- pte = pte_offset_map(pmd, address);
- entry = *pte;
-
/*
* If this page is present, it's actually being shared.
*/
@@ -68,33 +52,55 @@
* fault (ie, is old), we can safely ignore any issues.
*/
if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
- unsigned long pfn = pte_pfn(entry);
flush_cache_page(vma, address, pfn);
outer_flush_range((pfn << PAGE_SHIFT),
(pfn << PAGE_SHIFT) + PAGE_SIZE);
pte_val(entry) &= ~L_PTE_MT_MASK;
pte_val(entry) |= shared_pte_mask;
- set_pte_at(vma->vm_mm, address, pte, entry);
+ set_pte_at(vma->vm_mm, address, ptep, entry);
flush_tlb_page(vma, address);
}
- pte_unmap(pte);
+
return ret;
+}
-bad_pgd:
- pgd_ERROR(*pgd);
- pgd_clear(pgd);
-no_pgd:
- return 0;
+static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
+ unsigned long pfn)
+{
+ spinlock_t *ptl;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int ret;
-bad_pmd:
- pmd_ERROR(*pmd);
- pmd_clear(pmd);
-no_pmd:
- return 0;
+ pgd = pgd_offset(vma->vm_mm, address);
+ if (pgd_none_or_clear_bad(pgd))
+ return 0;
+
+ pmd = pmd_offset(pgd, address);
+ if (pmd_none_or_clear_bad(pmd))
+ return 0;
+
+ /*
+ * This is called while another page table is mapped, so we
+ * must use the nested version. This also means we need to
+ * open-code the spin-locking.
+ */
+ ptl = pte_lockptr(vma->vm_mm, pmd);
+ pte = pte_offset_map_nested(pmd, address);
+ spin_lock(ptl);
+
+ ret = do_adjust_pte(vma, address, pfn, pte);
+
+ spin_unlock(ptl);
+ pte_unmap_nested(pte);
+
+ return ret;
}
static void
-make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigned long addr, unsigned long pfn)
+make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep, unsigned long pfn)
{
struct mm_struct *mm = vma->vm_mm;
struct vm_area_struct *mpnt;
@@ -122,11 +128,11 @@
if (!(mpnt->vm_flags & VM_MAYSHARE))
continue;
offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
- aliases += adjust_pte(mpnt, mpnt->vm_start + offset);
+ aliases += adjust_pte(mpnt, mpnt->vm_start + offset, pfn);
}
flush_dcache_mmap_unlock(mapping);
if (aliases)
- adjust_pte(vma, addr);
+ do_adjust_pte(vma, addr, pfn, ptep);
else
flush_cache_page(vma, addr, pfn);
}
@@ -144,9 +150,10 @@
*
* Note that the pte lock will be held.
*/
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep)
{
- unsigned long pfn = pte_pfn(pte);
+ unsigned long pfn = pte_pfn(*ptep);
struct address_space *mapping;
struct page *page;
@@ -168,7 +175,7 @@
#endif
if (mapping) {
if (cache_is_vivt())
- make_coherent(mapping, vma, addr, pfn);
+ make_coherent(mapping, vma, addr, ptep, pfn);
else if (vma->vm_flags & VM_EXEC)
__flush_icache_all();
}
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 10e0680..9d40c34 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -18,6 +18,7 @@
#include <linux/page-flags.h>
#include <linux/sched.h>
#include <linux/highmem.h>
+#include <linux/perf_event.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -302,6 +303,12 @@
fault = __do_page_fault(mm, addr, fsr, tsk);
up_read(&mm->mmap_sem);
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, addr);
+ if (fault & VM_FAULT_MAJOR)
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, regs, addr);
+ else if (fault & VM_FAULT_MINOR)
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, regs, addr);
+
/*
* Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
*/
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 6f3a4b7..e34f095 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -13,6 +13,7 @@
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
+#include <asm/smp_plat.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
@@ -87,13 +88,26 @@
if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
__flush_icache_all();
}
+#else
+#define flush_pfn_alias(pfn,vaddr) do { } while (0)
+#endif
+#ifdef CONFIG_SMP
+static void flush_ptrace_access_other(void *args)
+{
+ __flush_icache_all();
+}
+#endif
+
+static
void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write)
+ unsigned long uaddr, void *kaddr, unsigned long len)
{
if (cache_is_vivt()) {
- vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+ unsigned long addr = (unsigned long)kaddr;
+ __cpuc_coherent_kern_range(addr, addr + len);
+ }
return;
}
@@ -104,16 +118,37 @@
}
/* VIPT non-aliasing cache */
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)) &&
- vma->vm_flags & VM_EXEC) {
+ if (vma->vm_flags & VM_EXEC) {
unsigned long addr = (unsigned long)kaddr;
- /* only flushing the kernel mapping on non-aliasing VIPT */
__cpuc_coherent_kern_range(addr, addr + len);
+#ifdef CONFIG_SMP
+ if (cache_ops_need_broadcast())
+ smp_call_function(flush_ptrace_access_other,
+ NULL, 1);
+#endif
}
}
-#else
-#define flush_pfn_alias(pfn,vaddr) do { } while (0)
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space. Really, we want to allow our "user
+ * space" model to handle this.
+ *
+ * Note that this code needs to run on the current CPU.
+ */
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long uaddr, void *dst, const void *src,
+ unsigned long len)
+{
+#ifdef CONFIG_SMP
+ preempt_disable();
#endif
+ memcpy(dst, src, len);
+ flush_ptrace_access(vma, page, uaddr, dst, len);
+#ifdef CONFIG_SMP
+ preempt_enable();
+#endif
+}
void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 8012e24..72507c6 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -265,7 +265,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020_dma_inv_range)
+arm1020_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -295,7 +295,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020_dma_clean_range)
+arm1020_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -330,6 +330,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1020_dma_clean_range
+ bcs arm1020_dma_inv_range
+ b arm1020_dma_flush_range
+ENDPROC(arm1020_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1020_dma_unmap_area)
+
ENTRY(arm1020_cache_fns)
.long arm1020_flush_kern_cache_all
.long arm1020_flush_user_cache_all
@@ -337,8 +361,8 @@
.long arm1020_coherent_kern_range
.long arm1020_coherent_user_range
.long arm1020_flush_kern_dcache_area
- .long arm1020_dma_inv_range
- .long arm1020_dma_clean_range
+ .long arm1020_dma_map_area
+ .long arm1020_dma_unmap_area
.long arm1020_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 41fe25d..d278298 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -258,7 +258,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020e_dma_inv_range)
+arm1020e_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -284,7 +284,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020e_dma_clean_range)
+arm1020e_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -316,6 +316,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020e_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1020e_dma_clean_range
+ bcs arm1020e_dma_inv_range
+ b arm1020e_dma_flush_range
+ENDPROC(arm1020e_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020e_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1020e_dma_unmap_area)
+
ENTRY(arm1020e_cache_fns)
.long arm1020e_flush_kern_cache_all
.long arm1020e_flush_user_cache_all
@@ -323,8 +347,8 @@
.long arm1020e_coherent_kern_range
.long arm1020e_coherent_user_range
.long arm1020e_flush_kern_dcache_area
- .long arm1020e_dma_inv_range
- .long arm1020e_dma_clean_range
+ .long arm1020e_dma_map_area
+ .long arm1020e_dma_unmap_area
.long arm1020e_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 20a5b1b..ce13e4a 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -247,7 +247,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1022_dma_inv_range)
+arm1022_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -273,7 +273,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1022_dma_clean_range)
+arm1022_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -305,6 +305,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1022_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1022_dma_clean_range
+ bcs arm1022_dma_inv_range
+ b arm1022_dma_flush_range
+ENDPROC(arm1022_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1022_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1022_dma_unmap_area)
+
ENTRY(arm1022_cache_fns)
.long arm1022_flush_kern_cache_all
.long arm1022_flush_user_cache_all
@@ -312,8 +336,8 @@
.long arm1022_coherent_kern_range
.long arm1022_coherent_user_range
.long arm1022_flush_kern_dcache_area
- .long arm1022_dma_inv_range
- .long arm1022_dma_clean_range
+ .long arm1022_dma_map_area
+ .long arm1022_dma_unmap_area
.long arm1022_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 96aedb1..636672a 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -241,7 +241,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1026_dma_inv_range)
+arm1026_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -267,7 +267,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1026_dma_clean_range)
+arm1026_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -299,6 +299,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1026_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1026_dma_clean_range
+ bcs arm1026_dma_inv_range
+ b arm1026_dma_flush_range
+ENDPROC(arm1026_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1026_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1026_dma_unmap_area)
+
ENTRY(arm1026_cache_fns)
.long arm1026_flush_kern_cache_all
.long arm1026_flush_user_cache_all
@@ -306,8 +330,8 @@
.long arm1026_coherent_kern_range
.long arm1026_coherent_user_range
.long arm1026_flush_kern_dcache_area
- .long arm1026_dma_inv_range
- .long arm1026_dma_clean_range
+ .long arm1026_dma_map_area
+ .long arm1026_dma_unmap_area
.long arm1026_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 471669e..8be8199 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -239,7 +239,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm920_dma_inv_range)
+arm920_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -262,7 +262,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm920_dma_clean_range)
+arm920_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -288,6 +288,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm920_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm920_dma_clean_range
+ bcs arm920_dma_inv_range
+ b arm920_dma_flush_range
+ENDPROC(arm920_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm920_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm920_dma_unmap_area)
+
ENTRY(arm920_cache_fns)
.long arm920_flush_kern_cache_all
.long arm920_flush_user_cache_all
@@ -295,8 +319,8 @@
.long arm920_coherent_kern_range
.long arm920_coherent_user_range
.long arm920_flush_kern_dcache_area
- .long arm920_dma_inv_range
- .long arm920_dma_clean_range
+ .long arm920_dma_map_area
+ .long arm920_dma_unmap_area
.long arm920_dma_flush_range
#endif
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index ee111b0..c0ff8e4 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -241,7 +241,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm922_dma_inv_range)
+arm922_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -264,7 +264,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm922_dma_clean_range)
+arm922_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -290,6 +290,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm922_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm922_dma_clean_range
+ bcs arm922_dma_inv_range
+ b arm922_dma_flush_range
+ENDPROC(arm922_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm922_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm922_dma_unmap_area)
+
ENTRY(arm922_cache_fns)
.long arm922_flush_kern_cache_all
.long arm922_flush_user_cache_all
@@ -297,8 +321,8 @@
.long arm922_coherent_kern_range
.long arm922_coherent_user_range
.long arm922_flush_kern_dcache_area
- .long arm922_dma_inv_range
- .long arm922_dma_clean_range
+ .long arm922_dma_map_area
+ .long arm922_dma_unmap_area
.long arm922_dma_flush_range
#endif
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 8deb5bd..3c6cffe 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -283,7 +283,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm925_dma_inv_range)
+arm925_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -308,7 +308,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm925_dma_clean_range)
+arm925_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -341,6 +341,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm925_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm925_dma_clean_range
+ bcs arm925_dma_inv_range
+ b arm925_dma_flush_range
+ENDPROC(arm925_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm925_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm925_dma_unmap_area)
+
ENTRY(arm925_cache_fns)
.long arm925_flush_kern_cache_all
.long arm925_flush_user_cache_all
@@ -348,8 +372,8 @@
.long arm925_coherent_kern_range
.long arm925_coherent_user_range
.long arm925_flush_kern_dcache_area
- .long arm925_dma_inv_range
- .long arm925_dma_clean_range
+ .long arm925_dma_map_area
+ .long arm925_dma_unmap_area
.long arm925_dma_flush_range
ENTRY(cpu_arm925_dcache_clean_area)
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 64db6e2..75b707c 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -246,7 +246,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm926_dma_inv_range)
+arm926_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -271,7 +271,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm926_dma_clean_range)
+arm926_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -304,6 +304,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm926_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm926_dma_clean_range
+ bcs arm926_dma_inv_range
+ b arm926_dma_flush_range
+ENDPROC(arm926_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm926_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm926_dma_unmap_area)
+
ENTRY(arm926_cache_fns)
.long arm926_flush_kern_cache_all
.long arm926_flush_user_cache_all
@@ -311,8 +335,8 @@
.long arm926_coherent_kern_range
.long arm926_coherent_user_range
.long arm926_flush_kern_dcache_area
- .long arm926_dma_inv_range
- .long arm926_dma_clean_range
+ .long arm926_dma_map_area
+ .long arm926_dma_unmap_area
.long arm926_dma_flush_range
ENTRY(cpu_arm926_dcache_clean_area)
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 8196b9f..1af1657 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -171,7 +171,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(arm940_dma_inv_range)
+arm940_dma_inv_range:
mov ip, #0
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
@@ -192,7 +192,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(arm940_dma_clean_range)
+arm940_dma_clean_range:
ENTRY(cpu_arm940_dcache_clean_area)
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -233,6 +233,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm940_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm940_dma_clean_range
+ bcs arm940_dma_inv_range
+ b arm940_dma_flush_range
+ENDPROC(arm940_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm940_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm940_dma_unmap_area)
+
ENTRY(arm940_cache_fns)
.long arm940_flush_kern_cache_all
.long arm940_flush_user_cache_all
@@ -240,8 +264,8 @@
.long arm940_coherent_kern_range
.long arm940_coherent_user_range
.long arm940_flush_kern_dcache_area
- .long arm940_dma_inv_range
- .long arm940_dma_clean_range
+ .long arm940_dma_map_area
+ .long arm940_dma_unmap_area
.long arm940_dma_flush_range
__INIT
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 9a95123..1664b6a 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -215,7 +215,7 @@
* - end - virtual end address
* (same as arm926)
*/
-ENTRY(arm946_dma_inv_range)
+arm946_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -240,7 +240,7 @@
*
* (same as arm926)
*/
-ENTRY(arm946_dma_clean_range)
+arm946_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -275,6 +275,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm946_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm946_dma_clean_range
+ bcs arm946_dma_inv_range
+ b arm946_dma_flush_range
+ENDPROC(arm946_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm946_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm946_dma_unmap_area)
+
ENTRY(arm946_cache_fns)
.long arm946_flush_kern_cache_all
.long arm946_flush_user_cache_all
@@ -282,8 +306,8 @@
.long arm946_coherent_kern_range
.long arm946_coherent_user_range
.long arm946_flush_kern_dcache_area
- .long arm946_dma_inv_range
- .long arm946_dma_clean_range
+ .long arm946_dma_map_area
+ .long arm946_dma_unmap_area
.long arm946_dma_flush_range
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index dbc3938..53e6323 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -274,7 +274,7 @@
* (same as v4wb)
*/
.align 5
-ENTRY(feroceon_dma_inv_range)
+feroceon_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -288,7 +288,7 @@
mov pc, lr
.align 5
-ENTRY(feroceon_range_dma_inv_range)
+feroceon_range_dma_inv_range:
mrs r2, cpsr
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -314,7 +314,7 @@
* (same as v4wb)
*/
.align 5
-ENTRY(feroceon_dma_clean_range)
+feroceon_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -324,7 +324,7 @@
mov pc, lr
.align 5
-ENTRY(feroceon_range_dma_clean_range)
+feroceon_range_dma_clean_range:
mrs r2, cpsr
cmp r1, r0
subne r1, r1, #1 @ top address is inclusive
@@ -367,6 +367,44 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq feroceon_dma_clean_range
+ bcs feroceon_dma_inv_range
+ b feroceon_dma_flush_range
+ENDPROC(feroceon_dma_map_area)
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_range_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq feroceon_range_dma_clean_range
+ bcs feroceon_range_dma_inv_range
+ b feroceon_range_dma_flush_range
+ENDPROC(feroceon_range_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_dma_unmap_area)
+ mov pc, lr
+ENDPROC(feroceon_dma_unmap_area)
+
ENTRY(feroceon_cache_fns)
.long feroceon_flush_kern_cache_all
.long feroceon_flush_user_cache_all
@@ -374,8 +412,8 @@
.long feroceon_coherent_kern_range
.long feroceon_coherent_user_range
.long feroceon_flush_kern_dcache_area
- .long feroceon_dma_inv_range
- .long feroceon_dma_clean_range
+ .long feroceon_dma_map_area
+ .long feroceon_dma_unmap_area
.long feroceon_dma_flush_range
ENTRY(feroceon_range_cache_fns)
@@ -385,8 +423,8 @@
.long feroceon_coherent_kern_range
.long feroceon_coherent_user_range
.long feroceon_range_flush_kern_dcache_area
- .long feroceon_range_dma_inv_range
- .long feroceon_range_dma_clean_range
+ .long feroceon_range_dma_map_area
+ .long feroceon_dma_unmap_area
.long feroceon_range_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 9674d36..caa3115 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -218,7 +218,7 @@
*
* (same as v4wb)
*/
-ENTRY(mohawk_dma_inv_range)
+mohawk_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
tst r1, #CACHE_DLINESIZE - 1
@@ -241,7 +241,7 @@
*
* (same as v4wb)
*/
-ENTRY(mohawk_dma_clean_range)
+mohawk_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -268,6 +268,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(mohawk_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq mohawk_dma_clean_range
+ bcs mohawk_dma_inv_range
+ b mohawk_dma_flush_range
+ENDPROC(mohawk_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(mohawk_dma_unmap_area)
+ mov pc, lr
+ENDPROC(mohawk_dma_unmap_area)
+
ENTRY(mohawk_cache_fns)
.long mohawk_flush_kern_cache_all
.long mohawk_flush_user_cache_all
@@ -275,8 +299,8 @@
.long mohawk_coherent_kern_range
.long mohawk_coherent_user_range
.long mohawk_flush_kern_dcache_area
- .long mohawk_dma_inv_range
- .long mohawk_dma_clean_range
+ .long mohawk_dma_map_area
+ .long mohawk_dma_unmap_area
.long mohawk_dma_flush_range
ENTRY(cpu_mohawk_dcache_clean_area)
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 8e4f6dc..e5797f1 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -257,7 +257,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xsc3_dma_inv_range)
+xsc3_dma_inv_range:
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line
@@ -278,7 +278,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xsc3_dma_clean_range)
+xsc3_dma_clean_range:
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
add r0, r0, #CACHELINESIZE
@@ -304,6 +304,30 @@
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xsc3_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq xsc3_dma_clean_range
+ bcs xsc3_dma_inv_range
+ b xsc3_dma_flush_range
+ENDPROC(xsc3_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xsc3_dma_unmap_area)
+ mov pc, lr
+ENDPROC(xsc3_dma_unmap_area)
+
ENTRY(xsc3_cache_fns)
.long xsc3_flush_kern_cache_all
.long xsc3_flush_user_cache_all
@@ -311,8 +335,8 @@
.long xsc3_coherent_kern_range
.long xsc3_coherent_user_range
.long xsc3_flush_kern_dcache_area
- .long xsc3_dma_inv_range
- .long xsc3_dma_clean_range
+ .long xsc3_dma_map_area
+ .long xsc3_dma_unmap_area
.long xsc3_dma_flush_range
ENTRY(cpu_xsc3_dcache_clean_area)
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 93df472..63037e2 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -315,7 +315,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xscale_dma_inv_range)
+xscale_dma_inv_range:
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -336,7 +336,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xscale_dma_clean_range)
+xscale_dma_clean_range:
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHELINESIZE
@@ -363,6 +363,43 @@
mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq xscale_dma_clean_range
+ bcs xscale_dma_inv_range
+ b xscale_dma_flush_range
+ENDPROC(xscale_dma_map_area)
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_a0_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ beq xscale_dma_clean_range
+ b xscale_dma_flush_range
+ENDPROC(xscsale_dma_a0_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_unmap_area)
+ mov pc, lr
+ENDPROC(xscale_dma_unmap_area)
+
ENTRY(xscale_cache_fns)
.long xscale_flush_kern_cache_all
.long xscale_flush_user_cache_all
@@ -370,8 +407,8 @@
.long xscale_coherent_kern_range
.long xscale_coherent_user_range
.long xscale_flush_kern_dcache_area
- .long xscale_dma_inv_range
- .long xscale_dma_clean_range
+ .long xscale_dma_map_area
+ .long xscale_dma_unmap_area
.long xscale_dma_flush_range
/*
@@ -394,8 +431,8 @@
.long xscale_coherent_kern_range
.long xscale_coherent_user_range
.long xscale_flush_kern_dcache_area
- .long xscale_dma_flush_range
- .long xscale_dma_clean_range
+ .long xscale_dma_a0_map_area
+ .long xscale_dma_unmap_area
.long xscale_dma_flush_range
ENTRY(cpu_xscale_dcache_clean_area)
diff --git a/arch/arm/oprofile/op_model_arm11_core.c b/arch/arm/oprofile/op_model_arm11_core.c
index ad80752..ef3e265 100644
--- a/arch/arm/oprofile/op_model_arm11_core.c
+++ b/arch/arm/oprofile/op_model_arm11_core.c
@@ -132,7 +132,7 @@
return IRQ_HANDLED;
}
-int arm11_request_interrupts(int *irqs, int nr)
+int arm11_request_interrupts(const int *irqs, int nr)
{
unsigned int i;
int ret = 0;
@@ -153,7 +153,7 @@
return ret;
}
-void arm11_release_interrupts(int *irqs, int nr)
+void arm11_release_interrupts(const int *irqs, int nr)
{
unsigned int i;
diff --git a/arch/arm/oprofile/op_model_arm11_core.h b/arch/arm/oprofile/op_model_arm11_core.h
index 6f8538e..1902b99 100644
--- a/arch/arm/oprofile/op_model_arm11_core.h
+++ b/arch/arm/oprofile/op_model_arm11_core.h
@@ -39,7 +39,7 @@
int arm11_setup_pmu(void);
int arm11_start_pmu(void);
int arm11_stop_pmu(void);
-int arm11_request_interrupts(int *, int);
-void arm11_release_interrupts(int *, int);
+int arm11_request_interrupts(const int *, int);
+void arm11_release_interrupts(const int *, int);
#endif
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 4ce0f98..f73ce87 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -32,6 +32,7 @@
/* #define DEBUG */
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/sched.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
@@ -43,6 +44,7 @@
#include <mach/hardware.h>
#include <mach/board-eb.h>
#include <asm/system.h>
+#include <asm/pmu.h>
#include "op_counter.h"
#include "op_arm_model.h"
@@ -58,6 +60,7 @@
* Bitmask of used SCU counters
*/
static unsigned int scu_em_used;
+static const struct pmu_irqs *pmu_irqs;
/*
* 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number)
@@ -225,33 +228,40 @@
return 0;
}
-static int arm11_irqs[] = {
- [0] = IRQ_EB11MP_PMU_CPU0,
- [1] = IRQ_EB11MP_PMU_CPU1,
- [2] = IRQ_EB11MP_PMU_CPU2,
- [3] = IRQ_EB11MP_PMU_CPU3
-};
-
static int em_start(void)
{
int ret;
- ret = arm11_request_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ pmu_irqs = reserve_pmu();
+ if (IS_ERR(pmu_irqs)) {
+ ret = PTR_ERR(pmu_irqs);
+ goto out;
+ }
+
+ ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
if (ret == 0) {
em_call_function(arm11_start_pmu);
ret = scu_start();
- if (ret)
- arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ if (ret) {
+ arm11_release_interrupts(pmu_irqs->irqs,
+ pmu_irqs->num_irqs);
+ } else {
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
+ }
}
+
+out:
return ret;
}
static void em_stop(void)
{
em_call_function(arm11_stop_pmu);
- arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
scu_stop();
+ release_pmu(pmu_irqs);
}
/*
@@ -283,15 +293,7 @@
em_route_irq(IRQ_EB11MP_PMU_SCU6, 3);
em_route_irq(IRQ_EB11MP_PMU_SCU7, 3);
- /*
- * Send CP15 PMU interrupts to the owner CPU.
- */
- em_route_irq(IRQ_EB11MP_PMU_CPU0, 0);
- em_route_irq(IRQ_EB11MP_PMU_CPU1, 1);
- em_route_irq(IRQ_EB11MP_PMU_CPU2, 2);
- em_route_irq(IRQ_EB11MP_PMU_CPU3, 3);
-
- return 0;
+ return init_pmu();
}
struct op_arm_model_spec op_mpcore_spec = {
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
index f7d2ec5..a22357a 100644
--- a/arch/arm/oprofile/op_model_v6.c
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -19,39 +19,47 @@
/* #define DEBUG */
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/sched.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/system.h>
+#include <asm/pmu.h>
#include "op_counter.h"
#include "op_arm_model.h"
#include "op_model_arm11_core.h"
-static int irqs[] = {
-#ifdef CONFIG_ARCH_OMAP2
- 3,
-#endif
-#ifdef CONFIG_ARCH_BCMRING
- IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
-#endif
-};
+static const struct pmu_irqs *pmu_irqs;
static void armv6_pmu_stop(void)
{
arm11_stop_pmu();
- arm11_release_interrupts(irqs, ARRAY_SIZE(irqs));
+ arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
}
static int armv6_pmu_start(void)
{
int ret;
- ret = arm11_request_interrupts(irqs, ARRAY_SIZE(irqs));
- if (ret >= 0)
- ret = arm11_start_pmu();
+ pmu_irqs = reserve_pmu();
+ if (IS_ERR(pmu_irqs)) {
+ ret = PTR_ERR(pmu_irqs);
+ goto out;
+ }
+ ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+ if (ret >= 0) {
+ ret = arm11_start_pmu();
+ } else {
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
+ }
+
+out:
return ret;
}
diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c
index 2088a6c..8642d08 100644
--- a/arch/arm/oprofile/op_model_v7.c
+++ b/arch/arm/oprofile/op_model_v7.c
@@ -11,11 +11,14 @@
*/
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/smp.h>
+#include <asm/pmu.h>
+
#include "op_counter.h"
#include "op_arm_model.h"
#include "op_model_v7.h"
@@ -295,7 +298,7 @@
return IRQ_HANDLED;
}
-int armv7_request_interrupts(int *irqs, int nr)
+int armv7_request_interrupts(const int *irqs, int nr)
{
unsigned int i;
int ret = 0;
@@ -318,7 +321,7 @@
return ret;
}
-void armv7_release_interrupts(int *irqs, int nr)
+void armv7_release_interrupts(const int *irqs, int nr)
{
unsigned int i;
@@ -362,12 +365,7 @@
}
#endif
-
-static int irqs[] = {
-#ifdef CONFIG_ARCH_OMAP3
- INT_34XX_BENCH_MPU_EMUL,
-#endif
-};
+static const struct pmu_irqs *pmu_irqs;
static void armv7_pmnc_stop(void)
{
@@ -375,19 +373,29 @@
armv7_pmnc_dump_regs();
#endif
armv7_stop_pmnc();
- armv7_release_interrupts(irqs, ARRAY_SIZE(irqs));
+ armv7_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
}
static int armv7_pmnc_start(void)
{
int ret;
+ pmu_irqs = reserve_pmu();
+ if (IS_ERR(pmu_irqs))
+ return PTR_ERR(pmu_irqs);
+
#ifdef DEBUG
armv7_pmnc_dump_regs();
#endif
- ret = armv7_request_interrupts(irqs, ARRAY_SIZE(irqs));
- if (ret >= 0)
+ ret = armv7_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+ if (ret >= 0) {
armv7_start_pmnc();
+ } else {
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
+ }
return ret;
}
diff --git a/arch/arm/oprofile/op_model_v7.h b/arch/arm/oprofile/op_model_v7.h
index 0e19bcc..9ca334b 100644
--- a/arch/arm/oprofile/op_model_v7.h
+++ b/arch/arm/oprofile/op_model_v7.h
@@ -97,7 +97,7 @@
int armv7_setup_pmu(void);
int armv7_start_pmu(void);
int armv7_stop_pmu(void);
-int armv7_request_interrupts(int *, int);
-void armv7_release_interrupts(int *, int);
+int armv7_request_interrupts(const int *, int);
+void armv7_release_interrupts(const int *, int);
#endif
diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c
index 724ab9c..1d34a02 100644
--- a/arch/arm/oprofile/op_model_xscale.c
+++ b/arch/arm/oprofile/op_model_xscale.c
@@ -17,12 +17,14 @@
/* #define DEBUG */
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/sched.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/cputype.h>
+#include <asm/pmu.h>
#include "op_counter.h"
#include "op_arm_model.h"
@@ -33,17 +35,6 @@
#define PMU_RESET (CCNT_RESET | PMN_RESET)
#define PMU_CNT64 0x008 /* Make CCNT count every 64th cycle */
-/* TODO do runtime detection */
-#ifdef CONFIG_ARCH_IOP32X
-#define XSCALE_PMU_IRQ IRQ_IOP32X_CORE_PMU
-#endif
-#ifdef CONFIG_ARCH_IOP33X
-#define XSCALE_PMU_IRQ IRQ_IOP33X_CORE_PMU
-#endif
-#ifdef CONFIG_ARCH_PXA
-#define XSCALE_PMU_IRQ IRQ_PMU
-#endif
-
/*
* Different types of events that can be counted by the XScale PMU
* as used by Oprofile userspace. Here primarily for documentation
@@ -367,6 +358,8 @@
return IRQ_HANDLED;
}
+static const struct pmu_irqs *pmu_irqs;
+
static void xscale_pmu_stop(void)
{
u32 pmnc = read_pmnc();
@@ -374,20 +367,30 @@
pmnc &= ~PMU_ENABLE;
write_pmnc(pmnc);
- free_irq(XSCALE_PMU_IRQ, results);
+ free_irq(pmu_irqs->irqs[0], results);
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
}
static int xscale_pmu_start(void)
{
int ret;
- u32 pmnc = read_pmnc();
+ u32 pmnc;
- ret = request_irq(XSCALE_PMU_IRQ, xscale_pmu_interrupt, IRQF_DISABLED,
- "XScale PMU", (void *)results);
+ pmu_irqs = reserve_pmu();
+ if (IS_ERR(pmu_irqs))
+ return PTR_ERR(pmu_irqs);
+
+ pmnc = read_pmnc();
+
+ ret = request_irq(pmu_irqs->irqs[0], xscale_pmu_interrupt,
+ IRQF_DISABLED, "XScale PMU", (void *)results);
if (ret < 0) {
printk(KERN_ERR "oprofile: unable to request IRQ%d for XScale PMU\n",
- XSCALE_PMU_IRQ);
+ pmu_irqs->irqs[0]);
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
return ret;
}
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 15b2b14..5a6ae1b 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -52,7 +52,7 @@
#define UART_PADDR MXC91231_UART2_BASE_ADDR
#define UART_VADDR MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
#endif
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =UART_PADDR @ physical
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 4d5d395..d49384c 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -60,7 +60,9 @@
UART(TXR) = ch;
}
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
#define MX1_UART1_BASE_ADDR 0x00206000
#define MX25_UART1_BASE_ADDR 0x43f90000
diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h
new file mode 100644
index 0000000..1621db6
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/i2c.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PLAT_I2C_H
+#define __PLAT_I2C_H
+
+enum i2c_freq_mode {
+ I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */
+ I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */
+ I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */
+ I2C_FREQ_MODE_HIGH_SPEED /* up to 3.4 Mb/s */
+};
+
+/**
+ * struct nmk_i2c_controller - client specific controller configuration
+ * @clk_freq: clock frequency for the operation mode
+ * @slsu: Slave data setup time in ns.
+ * The needed setup time for three modes of operation
+ * are 250ns, 100ns and 10ns respectively thus leading
+ * to the values of 14, 6, 2 for a 48 MHz i2c clk
+ * @tft: Tx FIFO Threshold in bytes
+ * @rft: Rx FIFO Threshold in bytes
+ * @sm: speed mode
+ */
+struct nmk_i2c_controller {
+ unsigned long clk_freq;
+ unsigned short slsu;
+ unsigned char tft;
+ unsigned char rft;
+ enum i2c_freq_mode sm;
+};
+
+#endif /* __PLAT_I2C_H */
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
index 84808cc..a52fb6c 100644
--- a/arch/arm/plat-s3c/dev-nand.c
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -58,8 +58,8 @@
return -ENOMEM;
}
- size = sizeof(int) * set->nr_chips;
- if (size) {
+ if (set->nr_map && set->nr_chips) {
+ size = sizeof(int) * set->nr_chips;
ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
set->nr_map = ptr;
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
index fb3b969..1b9348b 100644
--- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical base address
diff --git a/arch/avr32/include/asm/pgtable.h b/arch/avr32/include/asm/pgtable.h
index fecdda1..a9ae30c 100644
--- a/arch/avr32/include/asm/pgtable.h
+++ b/arch/avr32/include/asm/pgtable.h
@@ -325,7 +325,7 @@
struct vm_area_struct;
extern void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte);
+ unsigned long address, pte_t *ptep);
/*
* Encode and decode a swap entry
diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
index 06677be..0da2310 100644
--- a/arch/avr32/mm/tlb.c
+++ b/arch/avr32/mm/tlb.c
@@ -101,7 +101,7 @@
}
void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
unsigned long flags;
@@ -110,7 +110,7 @@
return;
local_irq_save(flags);
- update_dtlb(address, pte);
+ update_dtlb(address, *ptep);
local_irq_restore(flags);
}
diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h
index 1fcce00..99ea6cd 100644
--- a/arch/cris/include/asm/pgtable.h
+++ b/arch/cris/include/asm/pgtable.h
@@ -270,7 +270,7 @@
* Actually I am not sure on what this could be used for.
*/
static inline void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 22c6069..c18b0d3 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -505,7 +505,7 @@
/*
* preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache
*/
-static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
struct mm_struct *mm;
unsigned long ampr;
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 69bf138..c3286f4 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -462,7 +462,7 @@
return pte_val(a) == pte_val(b);
}
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
extern void paging_init (void);
diff --git a/arch/m32r/include/asm/tlbflush.h b/arch/m32r/include/asm/tlbflush.h
index 0ef9530..92614b0 100644
--- a/arch/m32r/include/asm/tlbflush.h
+++ b/arch/m32r/include/asm/tlbflush.h
@@ -92,6 +92,6 @@
);
}
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
#endif /* _ASM_M32R_TLBFLUSH_H */
diff --git a/arch/m32r/mm/fault-nommu.c b/arch/m32r/mm/fault-nommu.c
index 8846917..888aab1 100644
--- a/arch/m32r/mm/fault-nommu.c
+++ b/arch/m32r/mm/fault-nommu.c
@@ -95,7 +95,7 @@
* update_mmu_cache()
*======================================================================*/
void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
- pte_t pte)
+ pte_t *ptep)
{
BUG();
}
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index 7274b47..28ee389 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -336,7 +336,7 @@
addr = (address & PAGE_MASK);
set_thread_fault_code(error_code);
- update_mmu_cache(NULL, addr, *pte_k);
+ update_mmu_cache(NULL, addr, pte_k);
set_thread_fault_code(0);
return;
}
@@ -349,7 +349,7 @@
#define ITLB_END (unsigned long *)(ITLB_BASE + (NR_TLB_ENTRIES * 8))
#define DTLB_END (unsigned long *)(DTLB_BASE + (NR_TLB_ENTRIES * 8))
void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr,
- pte_t pte)
+ pte_t *ptep)
{
volatile unsigned long *entry1, *entry2;
unsigned long pte_data, flags;
@@ -365,7 +365,7 @@
vaddr = (vaddr & PAGE_MASK) | get_asid();
- pte_data = pte_val(pte);
+ pte_data = pte_val(*ptep);
#ifdef CONFIG_CHIP_OPSP
entry1 = (unsigned long *)ITLB_BASE;
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index aca0e28..87174c9 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -115,7 +115,7 @@
* they are updated on demand.
*/
static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index d8720ee..aebea19 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -146,7 +146,6 @@
.read = pit_read_clk,
.shift = 20,
.mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/***************************************************************************/
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index fd53e50..cd5837e 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -90,7 +90,7 @@
menu "Processor type and features"
-source kernel/time/Kconfig
+source "kernel/time/Kconfig"
source "kernel/Kconfig.preempt"
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
index a917dc5..d74dbfb 100644
--- a/arch/microblaze/include/asm/ptrace.h
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -54,6 +54,7 @@
int pt_mode;
};
+#ifdef __KERNEL__
#define kernel_mode(regs) ((regs)->pt_mode)
#define user_mode(regs) (!kernel_mode(regs))
@@ -62,6 +63,19 @@
void show_regs(struct pt_regs *);
+#else /* __KERNEL__ */
+
+/* pt_regs offsets used by gdbserver etc in ptrace syscalls */
+#define PT_GPR(n) ((n) * sizeof(microblaze_reg_t))
+#define PT_PC (32 * sizeof(microblaze_reg_t))
+#define PT_MSR (33 * sizeof(microblaze_reg_t))
+#define PT_EAR (34 * sizeof(microblaze_reg_t))
+#define PT_ESR (35 * sizeof(microblaze_reg_t))
+#define PT_FSR (36 * sizeof(microblaze_reg_t))
+#define PT_KERNEL_MODE (37 * sizeof(microblaze_reg_t))
+
+#endif /* __KERNEL */
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_MICROBLAZE_PTRACE_H */
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
index eb31a0e..10ec70c 100644
--- a/arch/microblaze/include/asm/tlbflush.h
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -38,7 +38,7 @@
#define flush_tlb_kernel_range(start, end) do { } while (0)
-#define update_mmu_cache(vma, addr, pte) do { } while (0)
+#define update_mmu_cache(vma, addr, ptep) do { } while (0)
#define flush_tlb_all local_flush_tlb_all
#define flush_tlb_mm local_flush_tlb_mm
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index cb05a07..2b67e92 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -377,13 +377,14 @@
#define __NR_shutdown 359 /* new */
#define __NR_sendmsg 360 /* new */
#define __NR_recvmsg 361 /* new */
-#define __NR_accept04 362 /* new */
+#define __NR_accept4 362 /* new */
#define __NR_preadv 363 /* new */
#define __NR_pwritev 364 /* new */
#define __NR_rt_tgsigqueueinfo 365 /* new */
#define __NR_perf_event_open 366 /* new */
+#define __NR_recvmmsg 367 /* new */
-#define __NR_syscalls 367
+#define __NR_syscalls 368
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index ae0352e..bf7e6c2 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -256,7 +256,7 @@
if (ppdev == NULL) {
struct pci_controller *host;
host = pci_bus_to_host(pdev->bus);
- ppnode = host ? host->arch_data : NULL;
+ ppnode = host ? host->dn : NULL;
/* No node for host bridge ? give up */
if (ppnode == NULL)
return -EINVAL;
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 4088be7..03376dc 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -366,7 +366,7 @@
.long sys_shutdown
.long sys_sendmsg /* 360 */
.long sys_recvmsg
- .long sys_ni_syscall
+ .long sys_accept4
.long sys_ni_syscall
.long sys_ni_syscall
.long sys_rt_tgsigqueueinfo /* 365 */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 1854336..c56bf8a 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -362,8 +362,9 @@
pte_t pte);
static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
+ pte_t pte = *ptep;
__update_tlb(vma, address, pte);
__update_cache(vma, address, pte);
}
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
index 6dc30fc..16d8857 100644
--- a/arch/mn10300/include/asm/pgtable.h
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -466,7 +466,7 @@
* the kernel page tables containing the necessary information by tlb-mn10300.S
*/
extern void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte);
+ unsigned long address, pte_t *ptep);
#endif /* !__ASSEMBLY__ */
diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c
index 31c9d27..36ba021 100644
--- a/arch/mn10300/mm/mmu-context.c
+++ b/arch/mn10300/mm/mmu-context.c
@@ -51,9 +51,10 @@
/*
* preemptively set a TLB entry
*/
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
{
unsigned long pteu, ptel, cnx, flags;
+ pte_t pte = *ptep;
addr &= PAGE_MASK;
ptel = pte_val(pte) & ~(xPTEL_UNUSED1 | xPTEL_UNUSED2);
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index a27d2e2..01c1503 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -410,7 +410,7 @@
#define PG_dcache_dirty PG_arch_1
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
/* Encode and de-code a swap entry */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index b6ed34d..1054baa 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -68,9 +68,9 @@
EXPORT_SYMBOL(flush_cache_all_local);
void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
- struct page *page = pte_page(pte);
+ struct page *page = pte_page(*ptep);
if (pfn_valid(page_to_pfn(page)) && page_mapping(page) &&
test_bit(PG_dcache_dirty, &page->flags)) {
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 826a30a..bb2465b 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -20,7 +20,7 @@
all: $(obj)/zImage
BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
- -fno-strict-aliasing -Os -msoft-float -pipe -D__KERNEL__\
+ -fno-strict-aliasing -Os -msoft-float -pipe \
-fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
-isystem $(shell $(CROSS32CC) -print-file-name=include)
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
@@ -34,8 +34,6 @@
endif
BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
-BOOTCFLAGS += -include include/linux/autoconf.h -Iarch/powerpc/include
-BOOTCFLAGS += -Iinclude
DTS_FLAGS ?= -p 1024
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 390512a..f4594ed 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -43,6 +43,9 @@
# cross-compilation prefix
CROSS=
+# mkimage wrapper script
+MKIMAGE=$srctree/scripts/mkuboot.sh
+
# directory for object and other files used by this script
object=arch/powerpc/boot
objbin=$object
@@ -267,7 +270,7 @@
case "$platform" in
uboot)
rm -f "$ofile"
- mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
+ ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
$uboot_version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
rm -f "$vmz"
@@ -327,7 +330,7 @@
;;
cuboot*)
gzip -f -9 "$ofile"
- mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
+ ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
$uboot_version -d "$ofile".gz "$ofile"
;;
treeboot*)
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 0396ce7..ff9bdb2 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:22 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:07 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -166,14 +169,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -189,6 +219,7 @@
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -243,6 +274,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -259,8 +291,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -273,6 +303,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -378,7 +409,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -489,6 +526,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
@@ -587,8 +628,8 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -643,6 +684,7 @@
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -688,7 +730,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -735,11 +776,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -797,7 +840,6 @@
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -1137,6 +1179,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1180,7 +1223,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index f5c07fd..7b3f4d0 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:09 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -86,6 +88,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
@@ -196,6 +226,7 @@
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -252,6 +283,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +300,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -285,6 +315,7 @@
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -398,7 +429,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -433,6 +470,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -443,6 +484,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -450,6 +492,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -502,7 +545,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -541,6 +586,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -596,15 +642,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -726,8 +773,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -741,6 +790,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -778,6 +828,7 @@
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -836,11 +887,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -849,7 +895,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -884,11 +929,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1129,6 +1176,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1172,7 +1220,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 4f77a1b..eaae2d4 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:22 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:08 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -166,14 +169,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -189,6 +219,7 @@
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -244,6 +275,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -260,8 +292,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -274,6 +304,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -379,7 +410,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -490,6 +527,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -499,9 +540,11 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -610,8 +653,7 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -657,6 +699,7 @@
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -700,7 +743,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -745,6 +787,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -805,11 +848,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -881,6 +926,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -902,7 +948,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1172,6 +1220,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1215,7 +1264,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index f9168c1..1742c02 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:25 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:10 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -172,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -195,6 +225,7 @@
# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -251,6 +282,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +299,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -385,7 +415,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -585,15 +621,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -673,8 +710,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -697,6 +737,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -734,6 +775,7 @@
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -791,11 +833,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -804,7 +841,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -839,11 +875,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -908,7 +946,6 @@
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -1011,6 +1048,7 @@
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1032,7 +1070,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1243,10 +1283,11 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -1269,7 +1310,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 75c835c..3972438 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:23 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:09 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +174,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -194,6 +224,7 @@
# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -249,6 +280,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -265,8 +297,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -279,6 +309,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -384,7 +415,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -496,6 +533,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
@@ -607,8 +648,8 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -663,6 +704,7 @@
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -708,7 +750,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -753,6 +794,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -818,11 +860,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -880,7 +924,6 @@
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -984,6 +1027,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1005,7 +1049,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1275,6 +1321,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1318,7 +1365,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 466f09a..baa2bbb 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:20 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:14 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,7 @@
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -88,6 +90,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -260,6 +290,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +307,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -530,6 +556,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -541,6 +571,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -548,6 +579,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -581,7 +613,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -668,8 +700,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -691,6 +726,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -700,6 +736,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -751,6 +788,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -807,11 +845,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -820,7 +853,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -866,6 +898,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -904,6 +937,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
@@ -942,11 +976,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -996,6 +1032,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1101,6 +1138,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1122,7 +1160,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1347,7 +1387,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1374,7 +1414,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index 6694fb7..8b1aa80 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:21 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:14 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -89,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -168,14 +171,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -253,6 +283,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -269,8 +300,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -384,7 +413,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -512,6 +547,10 @@
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -581,8 +620,7 @@
# CONFIG_MV643XX_ETH is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -652,6 +690,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -697,7 +736,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -732,11 +770,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -933,7 +973,7 @@
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -963,7 +1003,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 86df19f..2f2d985 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:22 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:15 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -544,6 +570,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -555,6 +585,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -562,6 +593,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -615,7 +648,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -653,6 +688,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -680,7 +716,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -805,8 +841,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -829,6 +868,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -838,6 +878,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -890,6 +931,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -947,11 +989,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -960,7 +997,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -975,6 +1011,8 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -1022,6 +1060,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1062,6 +1101,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1099,6 +1139,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1106,6 +1147,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1173,6 +1216,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1287,15 +1331,17 @@
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
@@ -1336,6 +1382,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1365,7 +1412,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1676,7 +1725,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 7bf71d5..633e611 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:23 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:16 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -544,6 +570,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -555,6 +585,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -562,6 +593,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -615,7 +648,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -654,6 +689,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -709,15 +745,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -744,7 +781,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -869,8 +906,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -893,6 +933,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -902,6 +943,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -954,6 +996,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1011,11 +1054,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1024,7 +1062,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1039,6 +1076,8 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -1086,6 +1125,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1126,6 +1166,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1163,6 +1204,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1170,6 +1212,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1237,6 +1281,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1351,15 +1396,17 @@
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
@@ -1400,6 +1447,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1429,7 +1477,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1740,7 +1790,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 7def835..0b4262b 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:24 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:17 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -260,6 +290,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +307,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -444,6 +470,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -454,6 +484,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -461,6 +492,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -513,7 +545,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -551,6 +585,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -568,7 +603,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -675,8 +710,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -690,6 +727,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -699,6 +737,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -751,6 +790,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -807,11 +847,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -820,7 +855,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -866,6 +900,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -904,6 +939,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -936,11 +972,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1023,6 +1061,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1044,7 +1083,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1220,7 +1261,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1247,7 +1288,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index b398b9b..155af00 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:24 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:18 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -260,6 +290,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +307,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -445,6 +471,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -456,6 +486,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -463,6 +494,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -474,6 +507,7 @@
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -516,7 +550,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -554,6 +590,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -571,7 +608,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -680,8 +717,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -704,6 +744,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -713,6 +754,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -766,6 +808,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -825,11 +868,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -838,7 +876,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -852,6 +889,8 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -899,6 +938,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -939,6 +979,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -976,6 +1017,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -983,6 +1025,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1050,6 +1094,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1387,7 +1432,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1414,7 +1459,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index f67317e..ff45f49 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:25 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:19 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -528,6 +554,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -539,6 +569,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -546,6 +577,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -647,7 +680,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -686,6 +721,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -741,15 +777,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
@@ -777,7 +814,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -860,8 +897,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -884,6 +924,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -925,6 +966,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -982,11 +1024,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -995,7 +1032,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1009,6 +1045,8 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -1062,6 +1100,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1069,6 +1108,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1117,6 +1158,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1235,6 +1277,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1264,7 +1307,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1485,7 +1530,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1512,7 +1557,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index a668110..28d8ff3 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:26 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:20 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -528,6 +554,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -539,6 +569,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -546,6 +577,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -599,7 +632,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -637,6 +672,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -654,7 +690,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -737,8 +773,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +800,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -802,6 +842,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -859,11 +900,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -872,7 +908,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -886,6 +921,8 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -939,6 +976,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -946,6 +984,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -994,6 +1034,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1112,6 +1153,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1141,7 +1183,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1362,7 +1406,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1389,7 +1433,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index c4e92ba..6252ab5 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:27 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:21 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -443,6 +469,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -453,6 +483,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -460,6 +491,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -493,7 +525,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -616,8 +648,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -630,6 +664,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -639,6 +674,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -690,6 +726,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -745,11 +782,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -758,7 +790,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -804,6 +835,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -842,6 +874,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -874,11 +907,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -961,6 +996,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -982,7 +1018,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1156,7 +1194,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1183,7 +1221,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 4f434b1..7822737 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:28 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:21 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -258,6 +288,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -274,8 +305,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -402,9 +431,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -525,6 +551,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -535,6 +565,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -542,6 +573,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -594,7 +626,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -632,6 +666,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -649,7 +684,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -756,8 +791,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -771,6 +808,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -780,6 +818,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -832,6 +871,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -888,11 +928,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -901,7 +936,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -947,6 +981,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -985,6 +1020,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1017,11 +1053,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1104,6 +1142,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1125,7 +1164,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1302,7 +1343,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1329,7 +1370,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index b52ec08..9451d6e 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:30 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:23 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -88,6 +90,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -258,6 +288,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -274,8 +305,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -539,6 +565,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -549,6 +579,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -556,6 +587,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -590,7 +623,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -657,8 +690,10 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -671,6 +706,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -680,6 +716,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -737,6 +774,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -795,11 +833,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -808,7 +841,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -823,6 +855,8 @@
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -854,6 +888,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -903,6 +938,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -910,6 +946,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1199,7 +1237,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1230,6 +1268,7 @@
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
#
# Security options
@@ -1237,7 +1276,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index 7300615..f67b70d 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:29 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:22 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -443,6 +469,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -453,6 +483,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -460,6 +491,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -512,7 +544,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -551,6 +585,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -606,15 +641,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -631,7 +667,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -736,8 +772,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -751,6 +789,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -760,6 +799,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -811,6 +851,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -868,11 +909,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -881,7 +917,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -927,6 +962,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -965,6 +1001,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -997,11 +1034,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1226,7 +1265,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1253,7 +1292,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 9e9158a..a84fd11 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:30 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:24 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -259,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -398,9 +427,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -438,6 +464,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -449,6 +479,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -456,6 +487,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -507,7 +539,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -546,6 +580,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -601,15 +636,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -638,7 +674,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -725,8 +761,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -749,6 +788,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -758,6 +798,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -809,6 +850,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -867,11 +909,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -880,7 +917,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -926,6 +962,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -964,6 +1001,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1001,11 +1039,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1097,6 +1137,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1385,7 +1426,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1412,7 +1453,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 6b39915..72c2067 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:31 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:25 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -172,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -257,6 +287,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -273,8 +304,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -401,9 +430,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -524,6 +550,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -535,6 +565,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -542,6 +573,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -604,7 +636,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -691,8 +723,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -715,6 +750,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -724,6 +760,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -775,6 +812,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -833,11 +871,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -846,7 +879,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -892,6 +924,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -930,6 +963,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -967,11 +1001,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1039,6 +1075,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1321,7 +1358,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1348,7 +1385,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index a5bde8d..21dad38 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:32 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:26 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -185,7 +216,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -248,6 +280,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -264,8 +297,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -385,9 +416,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -503,6 +531,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -603,8 +635,7 @@
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -624,6 +655,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -669,6 +701,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1051,7 +1084,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index c10e26f..5db54cd 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:33 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:27 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -170,14 +174,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -186,7 +217,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
CONFIG_MPC8540_ADS=y
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -205,6 +236,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -249,6 +281,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -265,8 +298,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -386,9 +417,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -423,6 +451,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -500,8 +532,7 @@
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -521,6 +552,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -570,6 +602,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -920,7 +953,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 8d9f0a4..76c7018 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:34 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:28 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +177,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -189,7 +220,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
CONFIG_MPC8560_ADS=y
# CONFIG_MPC85xx_CDS is not set
@@ -208,6 +239,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -252,6 +284,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +301,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -398,9 +429,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -440,6 +468,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -485,7 +517,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -594,8 +626,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -608,6 +642,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -617,6 +652,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -664,6 +700,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -705,6 +742,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1054,7 +1092,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 9b63e25..fab8ada 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:35 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:29 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -187,7 +218,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
CONFIG_MPC85xx_CDS=y
@@ -206,6 +237,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -250,6 +282,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -266,8 +299,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -396,9 +427,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -437,6 +465,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -537,7 +569,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -642,8 +674,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -656,6 +690,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -665,6 +700,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -717,6 +753,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1079,7 +1116,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 1b23568..8290385 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:36 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:29 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -185,7 +216,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
# CONFIG_TQM8560 is not set
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -247,6 +279,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -263,8 +296,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -392,9 +423,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -431,6 +459,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -476,7 +508,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -581,8 +613,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -595,6 +629,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -604,6 +639,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -656,6 +692,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -889,7 +926,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -915,7 +952,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 959d028..2499b5b 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:37 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:30 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -185,7 +216,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
CONFIG_SBC8560=y
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -247,6 +279,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -263,8 +296,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -384,9 +415,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -421,6 +449,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -498,8 +530,7 @@
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -519,6 +550,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -568,6 +600,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -702,7 +735,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -948,6 +983,7 @@
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
#
# Security options
@@ -955,7 +991,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 7f5ec35..e2edb79 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:37 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:31 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +178,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -190,7 +221,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -209,6 +240,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -252,6 +284,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +301,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,9 +435,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -540,6 +568,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -551,6 +583,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -558,6 +591,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -621,7 +656,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -710,8 +745,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -734,6 +772,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -743,6 +782,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -768,6 +808,7 @@
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
@@ -826,6 +867,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -883,11 +925,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -896,7 +933,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -910,6 +946,8 @@
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -957,6 +995,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -997,6 +1036,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1015,6 +1055,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1022,6 +1063,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1192,6 +1235,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1318,6 +1362,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1347,7 +1392,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1574,7 +1621,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1600,7 +1647,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index c8327e8..ce31325 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:38 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:32 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -178,14 +182,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -194,7 +225,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -213,6 +244,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -257,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -273,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -463,9 +494,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -513,6 +541,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -523,6 +555,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -530,6 +563,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -633,7 +667,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -673,6 +709,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -690,7 +727,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -797,8 +834,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -813,6 +852,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -822,6 +862,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -881,6 +922,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -905,6 +947,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -970,11 +1013,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -983,7 +1021,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1016,6 +1053,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1058,6 +1096,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1097,6 +1136,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1115,7 +1155,6 @@
# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
@@ -1465,7 +1504,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 82563703..0824b46 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:39 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:33 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -185,7 +216,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -248,6 +280,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -264,8 +297,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -391,9 +422,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -510,6 +538,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -520,6 +552,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -527,6 +560,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -615,7 +649,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -738,8 +772,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -752,6 +788,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -761,6 +798,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -813,6 +851,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -871,11 +910,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -883,7 +917,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -929,6 +962,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -967,6 +1001,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -985,11 +1020,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1220,7 +1257,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1246,7 +1283,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 91d85d73..2137be4 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:40 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:34 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -187,7 +218,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -206,6 +237,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -251,6 +283,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +300,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -514,6 +542,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -524,6 +556,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -531,6 +564,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -619,7 +653,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -743,8 +777,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -757,6 +793,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -766,6 +803,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -820,6 +858,7 @@
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -881,11 +920,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -893,7 +927,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -925,6 +958,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -967,6 +1001,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1006,6 +1041,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1025,11 +1061,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1260,7 +1298,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1286,7 +1324,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index debe268..5cc89aa 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:41 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:35 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -177,14 +181,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -193,7 +224,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -212,6 +243,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -257,6 +289,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -273,8 +306,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -406,7 +437,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -535,6 +572,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -545,6 +586,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -552,6 +594,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -585,7 +628,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -690,8 +733,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -704,6 +749,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -713,6 +759,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -765,6 +812,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -820,11 +868,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -833,7 +876,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -879,6 +921,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -917,6 +960,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -935,11 +979,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1003,6 +1049,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1024,7 +1071,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1280,7 +1329,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 7451550..e7b9148 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:42 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:36 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -187,7 +218,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -206,6 +237,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -251,6 +283,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +300,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -514,6 +542,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -524,6 +556,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -531,6 +564,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -619,7 +653,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -743,8 +777,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -757,6 +793,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -766,6 +803,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -820,6 +858,7 @@
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -881,11 +920,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -893,7 +927,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -925,6 +958,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -967,6 +1001,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1006,6 +1041,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1025,11 +1061,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1260,7 +1298,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1286,7 +1324,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 631d92b..a998e40 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:43 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:36 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -187,7 +218,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -206,6 +237,7 @@
CONFIG_TQM8560=y
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -251,6 +283,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +300,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -514,6 +542,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -524,6 +556,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -531,6 +564,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -619,7 +653,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -743,8 +777,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -757,6 +793,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -766,6 +803,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -820,6 +858,7 @@
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -881,11 +920,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -893,7 +927,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -925,6 +958,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -967,6 +1001,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1006,6 +1041,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1025,11 +1061,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1260,7 +1298,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1286,7 +1324,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 52acbac..fc656af 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:44 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:37 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -40,6 +40,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -63,6 +64,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -93,6 +96,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +185,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
@@ -198,7 +229,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -217,6 +248,7 @@
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -261,6 +293,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -277,8 +310,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -404,6 +435,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -441,7 +473,13 @@
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -576,6 +614,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -587,6 +629,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -594,6 +637,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -646,7 +690,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -685,6 +731,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -740,15 +787,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -765,7 +813,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -852,8 +900,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -876,6 +927,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -885,6 +937,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -914,6 +967,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -950,6 +1004,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1007,11 +1062,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1020,7 +1070,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1053,6 +1102,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1095,6 +1145,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1134,6 +1185,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1172,11 +1224,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1368,6 +1422,7 @@
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
@@ -1391,7 +1446,6 @@
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1420,6 +1474,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1441,7 +1496,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1772,7 +1829,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 6cd2cd6..a85f927 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:49 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:43 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +185,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -259,6 +290,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +307,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -314,7 +344,6 @@
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_PCMCIA_IOCTL is not set
@@ -414,6 +443,7 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -451,7 +481,13 @@
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -570,6 +606,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -581,6 +621,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -588,6 +629,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
@@ -689,7 +731,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -728,6 +772,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
@@ -785,15 +830,16 @@
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -810,7 +856,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -897,8 +943,14 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -937,6 +989,7 @@
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -946,6 +999,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -1005,6 +1059,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1070,11 +1125,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1083,7 +1133,6 @@
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1115,6 +1164,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1157,6 +1207,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1196,6 +1247,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1235,11 +1287,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1338,6 +1392,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1464,6 +1519,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
@@ -1485,7 +1541,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1710,7 +1768,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1737,7 +1795,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a6a3768..eb58dec 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:47 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:41 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +185,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -259,6 +290,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +307,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -314,7 +344,6 @@
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_PCMCIA_IOCTL is not set
@@ -414,6 +443,7 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -451,7 +481,13 @@
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -570,6 +606,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -581,6 +621,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -588,6 +629,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
@@ -689,7 +731,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -728,6 +772,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
@@ -753,7 +798,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -840,8 +885,14 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -880,6 +931,7 @@
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -889,6 +941,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -948,6 +1001,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1013,11 +1067,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1026,7 +1075,6 @@
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1058,6 +1106,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1100,6 +1149,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1139,6 +1189,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1178,11 +1229,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1281,6 +1334,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1407,6 +1461,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
@@ -1428,7 +1483,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1653,7 +1710,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1680,7 +1737,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 1975d41..4554d9b 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:48 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:42 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -182,14 +186,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -260,6 +291,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +308,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -400,6 +430,7 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -588,9 +619,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -719,6 +747,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -730,6 +762,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -737,6 +770,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
@@ -789,7 +823,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -828,6 +864,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -883,15 +920,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -908,7 +946,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -995,8 +1033,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1050,6 +1091,7 @@
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -1059,6 +1101,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -1117,6 +1160,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1174,11 +1218,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1187,7 +1226,6 @@
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1220,6 +1258,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1262,6 +1301,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1301,6 +1341,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1340,11 +1381,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1443,6 +1486,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1570,6 +1614,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
@@ -1591,7 +1636,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1891,9 +1938,12 @@
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index de4d525..aab3bae 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:45 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:39 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -86,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -176,14 +180,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -254,6 +285,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -270,8 +302,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -382,6 +412,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -420,9 +451,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -555,6 +583,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -565,6 +597,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -572,6 +605,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -671,7 +705,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -710,6 +746,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -765,15 +802,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -790,7 +828,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -838,8 +876,10 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -853,6 +893,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -862,6 +903,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -891,6 +933,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -927,6 +970,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -981,11 +1025,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -994,7 +1033,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1029,11 +1067,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1163,6 +1203,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1282,6 +1323,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1303,7 +1345,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1606,7 +1650,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 754a79b..727a8c8 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:46 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:40 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -90,6 +93,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -182,14 +186,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -260,6 +291,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +308,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -395,6 +425,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -439,9 +470,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -483,6 +511,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -494,6 +526,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -501,6 +534,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -554,7 +588,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -593,6 +629,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -648,15 +685,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -673,7 +711,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -778,8 +816,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -802,6 +843,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -811,6 +853,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -840,6 +883,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -876,6 +920,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -932,11 +977,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -945,7 +985,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -980,11 +1019,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1059,6 +1100,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1186,6 +1228,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1312,6 +1355,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1333,7 +1377,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1648,7 +1694,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 89991f1..4fb04dd 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:45 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:38 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -90,6 +93,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -162,6 +166,7 @@
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -182,14 +187,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -260,6 +292,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +309,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -399,6 +430,7 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -587,9 +619,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -717,6 +746,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -727,6 +760,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -734,6 +768,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -786,7 +821,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -873,8 +908,10 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -918,6 +955,7 @@
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -927,6 +965,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -985,6 +1024,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1042,11 +1082,6 @@
# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1055,7 +1090,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1101,6 +1135,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1139,6 +1174,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1171,11 +1207,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1281,7 +1319,6 @@
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
@@ -1556,8 +1593,12 @@
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 052cf13..5c1dc76 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:04 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:23:58 2010
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -55,6 +56,7 @@
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -82,6 +84,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -161,14 +164,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -242,6 +272,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -258,8 +289,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -373,9 +402,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -546,8 +572,7 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -567,6 +592,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -615,6 +641,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -637,6 +664,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -898,6 +926,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -943,7 +972,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 0fb65a8..72137cd 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:05 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:23:59 2010
#
# CONFIG_PPC64 is not set
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -92,6 +94,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,6 +176,7 @@
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -192,14 +196,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -224,6 +255,8 @@
# CONFIG_PPC_PRPMC2800 is not set
CONFIG_PPC_C2K=y
CONFIG_MV64X60=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
@@ -286,6 +319,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -296,14 +330,12 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -316,6 +348,7 @@
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -424,6 +457,7 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -687,10 +721,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
@@ -773,7 +803,6 @@
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
@@ -817,6 +846,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -870,7 +903,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
+# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
@@ -925,6 +960,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -942,7 +978,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -1027,8 +1063,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1054,6 +1093,7 @@
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -1063,6 +1103,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -1121,8 +1162,6 @@
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
@@ -1140,6 +1179,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1200,11 +1240,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1213,7 +1248,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1259,6 +1293,7 @@
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -1297,6 +1332,7 @@
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1333,7 +1369,6 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
@@ -1392,6 +1427,7 @@
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
@@ -1923,7 +1959,6 @@
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
@@ -1934,6 +1969,11 @@
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_SELINUX=y
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_DAC is not set
+CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index ef5edc7..7910541 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:06 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:23:59 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -160,14 +163,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -237,6 +267,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -249,8 +280,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -400,9 +429,6 @@
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -523,6 +549,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
@@ -553,7 +583,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -658,8 +688,9 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -670,6 +701,7 @@
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -705,6 +737,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -741,6 +774,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1061,7 +1095,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 73ef9be..58f7ca7 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:07 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:00 2010
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -54,6 +55,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -81,6 +83,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -159,14 +162,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -241,6 +271,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -257,8 +288,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -372,9 +401,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -545,8 +571,7 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -591,6 +616,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -851,6 +877,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -893,7 +920,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 63c3e8d..9a0c981 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:08 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:01 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -86,6 +88,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +184,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -215,6 +245,8 @@
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
@@ -261,6 +293,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -277,8 +310,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -517,10 +548,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
@@ -650,6 +677,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -661,6 +692,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -668,6 +700,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -720,7 +753,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -759,6 +794,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -814,15 +850,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -839,7 +876,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -934,8 +971,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -960,6 +1000,7 @@
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -969,6 +1010,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -1007,6 +1049,7 @@
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -1039,6 +1082,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1096,11 +1140,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1109,7 +1148,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1155,6 +1193,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1193,6 +1232,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1211,11 +1251,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1281,6 +1323,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1454,6 +1497,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1475,7 +1519,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1786,7 +1832,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 520b04a..4c2c877 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:09 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:02 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,7 +60,6 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -168,14 +169,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -208,7 +236,8 @@
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
@@ -250,6 +279,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -262,8 +292,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -395,9 +423,6 @@
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -525,6 +550,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -558,7 +587,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -625,8 +654,9 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -637,6 +667,7 @@
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -673,6 +704,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -734,11 +766,6 @@
# CONFIG_I2C_PARPORT_LIGHT is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -775,6 +802,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -807,11 +835,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1118,7 +1148,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 43c3c4f..9e090f2 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:10 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:03 2010
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -53,6 +54,7 @@
CONFIG_AUDIT_ARCH=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -80,6 +82,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -162,14 +165,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -244,6 +274,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -260,8 +291,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -379,9 +408,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -497,6 +523,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -568,8 +598,7 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -614,6 +643,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -863,6 +893,7 @@
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -887,7 +918,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 523d5fe..61cf73d 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:21 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 15:08:52 2009
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -170,14 +173,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
@@ -193,6 +223,7 @@
CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_PPC_MPC5200_LPBFIFO=m
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -211,6 +242,7 @@
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
+# CONFIG_PPC_RTAS_DAEMON is not set
CONFIG_RTAS_PROC=y
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
@@ -223,6 +255,7 @@
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
CONFIG_PPC_BESTCOMM_FEC=y
+CONFIG_PPC_BESTCOMM_GEN_BD=m
CONFIG_SIMPLE_GPIO=y
#
@@ -253,6 +286,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -269,8 +303,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -286,6 +318,7 @@
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -399,7 +432,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -530,6 +569,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -541,6 +584,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -548,6 +592,8 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -600,7 +646,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -639,6 +687,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -694,15 +743,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
@@ -785,8 +835,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -809,6 +862,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -818,6 +872,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -874,6 +929,7 @@
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -934,11 +990,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -947,7 +998,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -962,7 +1012,10 @@
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_MPC52xx is not set
CONFIG_SPI_MPC52xx_PSC=m
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -995,6 +1048,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1042,6 +1096,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1083,6 +1138,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1122,6 +1178,7 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1129,6 +1186,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1322,7 +1381,6 @@
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -1440,6 +1498,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1469,7 +1528,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1731,6 +1792,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1774,7 +1836,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index d8b364a..1315b77 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:10 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:04 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -167,14 +170,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -199,6 +229,8 @@
# CONFIG_PPC_PRPMC2800 is not set
# CONFIG_PPC_C2K is not set
CONFIG_TSI108_BRIDGE=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
@@ -244,6 +276,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -260,8 +293,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -385,9 +416,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -424,6 +452,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
@@ -487,7 +519,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -526,6 +560,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -580,15 +615,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -605,7 +641,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -731,8 +767,10 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -746,6 +784,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -755,6 +794,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -806,6 +846,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1091,7 +1132,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1118,7 +1159,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 00fad81..9073778 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:11 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:05 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -161,14 +164,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -240,6 +270,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -252,8 +283,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -526,6 +552,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
@@ -556,7 +586,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -661,8 +691,9 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -679,6 +710,7 @@
CONFIG_SLHC=y
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -688,6 +720,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -740,6 +773,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -763,6 +797,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -799,6 +834,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1131,7 +1167,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 64dff21..05bec48 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:12 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:06 2010
#
# CONFIG_PPC64 is not set
@@ -37,6 +37,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,7 @@
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
@@ -89,6 +91,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -176,14 +179,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -266,6 +296,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -282,8 +313,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -413,9 +442,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -548,6 +574,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -559,6 +589,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -566,6 +597,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -618,7 +650,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -657,6 +691,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -712,15 +747,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -737,7 +773,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -844,8 +880,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -868,6 +907,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -877,6 +917,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -929,6 +970,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -989,11 +1031,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1002,7 +1039,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1034,6 +1070,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1076,6 +1113,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1115,6 +1153,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1153,11 +1192,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1249,6 +1290,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1542,7 +1584,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1569,7 +1611,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index a12e7ba..8f35f80 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:25:20 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:06 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -92,6 +95,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -184,14 +188,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
@@ -201,7 +232,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
CONFIG_MPC8540_ADS=y
CONFIG_MPC8560_ADS=y
CONFIG_MPC85xx_CDS=y
@@ -220,6 +251,7 @@
CONFIG_TQM8560=y
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -267,6 +299,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -283,8 +316,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -405,6 +436,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -449,9 +481,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -494,6 +523,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -505,6 +538,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -512,6 +546,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -565,7 +600,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -604,6 +641,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -659,15 +697,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -684,7 +723,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -795,8 +834,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -820,6 +862,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -829,6 +872,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -858,6 +902,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -896,6 +941,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -956,11 +1002,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -969,7 +1010,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1002,6 +1042,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1035,11 +1076,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1114,6 +1157,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1241,6 +1285,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1347,7 +1392,6 @@
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1376,6 +1420,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1397,7 +1442,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1731,7 +1778,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index cd70b4a..8755ea3 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:26:01 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:07 2010
#
# CONFIG_PPC64 is not set
@@ -16,9 +16,9 @@
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
@@ -40,6 +40,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -63,6 +64,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -93,6 +96,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -187,14 +191,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
@@ -204,7 +235,7 @@
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
CONFIG_MPC8540_ADS=y
CONFIG_MPC8560_ADS=y
CONFIG_MPC85xx_CDS=y
@@ -223,6 +254,7 @@
CONFIG_TQM8560=y
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -271,6 +303,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -287,8 +320,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -409,6 +440,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -453,9 +485,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -498,6 +527,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -509,6 +542,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -516,6 +550,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -569,7 +604,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -608,6 +645,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -663,15 +701,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -688,7 +727,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -799,8 +838,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -824,6 +866,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -833,6 +876,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -862,6 +906,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -900,6 +945,7 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -960,11 +1006,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -973,7 +1014,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1006,6 +1046,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1039,11 +1080,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1118,6 +1161,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1245,6 +1289,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1351,7 +1396,6 @@
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1380,6 +1424,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1401,7 +1446,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1735,7 +1782,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 40d6f05..3f6b11b 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:15 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:08 2010
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -53,6 +54,7 @@
CONFIG_AUDIT_ARCH=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -80,6 +82,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -158,14 +161,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -240,6 +270,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -256,8 +287,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -375,9 +404,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -407,6 +433,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -485,8 +515,7 @@
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -506,6 +535,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -554,6 +584,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -576,6 +607,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -855,6 +887,7 @@
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -876,7 +909,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 5b3abb4..41884c9 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:16 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:09 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -183,14 +187,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
@@ -221,7 +252,7 @@
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
@@ -262,6 +293,7 @@
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -278,8 +310,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -397,6 +427,7 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -441,9 +472,6 @@
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -486,6 +514,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -497,6 +529,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -504,6 +537,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -557,7 +591,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -596,6 +632,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -651,15 +688,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -676,7 +714,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -781,8 +819,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -805,6 +846,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -814,6 +856,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -843,6 +886,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -879,6 +923,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -936,11 +981,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -949,7 +989,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -982,6 +1021,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1015,11 +1055,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1094,6 +1136,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
@@ -1221,6 +1264,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1348,6 +1392,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1369,7 +1414,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1684,7 +1731,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 1da3488..6b9e6bd 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:10 2010
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -54,6 +55,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -81,6 +83,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -159,14 +162,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -248,6 +278,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -264,8 +295,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -379,9 +408,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -556,8 +582,7 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -602,6 +627,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -862,6 +888,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -904,7 +931,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index b791121..5d06f2c 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:11 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -165,14 +168,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -243,6 +273,7 @@
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -255,8 +286,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -407,9 +436,6 @@
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -530,6 +556,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
@@ -616,7 +646,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -721,8 +751,9 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -739,6 +770,7 @@
CONFIG_SLHC=y
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -748,6 +780,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -802,6 +835,7 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -825,6 +859,7 @@
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -861,6 +896,7 @@
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -955,10 +991,12 @@
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
@@ -1248,7 +1286,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index ef50ce4..57ab574 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:18 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:12 2010
#
# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +90,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -175,14 +178,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -207,6 +237,8 @@
CONFIG_PPC_PRPMC2800=y
# CONFIG_PPC_C2K is not set
CONFIG_MV64X60=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
@@ -252,6 +284,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +301,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -518,6 +546,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -529,6 +561,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -536,6 +569,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -641,7 +675,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -680,6 +716,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -734,15 +771,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -759,7 +797,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -886,8 +924,11 @@
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -910,6 +951,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -919,6 +961,7 @@
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -973,6 +1016,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1030,11 +1074,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1042,7 +1081,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1088,6 +1126,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1126,6 +1165,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1144,11 +1184,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1250,6 +1292,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
@@ -1362,6 +1405,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1383,7 +1427,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1626,7 +1672,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 5242631..f2f8321 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov 5 08:20:19 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan 6 09:24:13 2010
#
# CONFIG_PPC64 is not set
@@ -36,6 +36,7 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -167,14 +170,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -201,6 +231,8 @@
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
# CONFIG_AMIGAONE is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
@@ -246,6 +278,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -262,8 +295,6 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
@@ -384,9 +415,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
@@ -507,6 +535,10 @@
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -515,6 +547,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -522,6 +555,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -628,7 +662,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -666,6 +702,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -695,7 +732,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -741,8 +778,11 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -765,6 +805,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -805,6 +846,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -862,11 +904,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -875,7 +912,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -910,11 +946,13 @@
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -963,6 +1001,7 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
@@ -1087,6 +1126,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1108,7 +1148,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1322,7 +1364,7 @@
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
@@ -1349,7 +1391,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 21207e5..89f1587 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -209,7 +209,7 @@
* corresponding HPTE into the hash table ahead of time, instead of
* waiting for the inevitable extra hash-table miss exception.
*/
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
extern int gup_hugepd(hugepd_t *hugepd, unsigned pdshift, unsigned long addr,
unsigned long end, int write, struct page **pages, int *nr);
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 22f738d..bbf8970 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -17,7 +17,9 @@
#define parent_node(node) (node)
-#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
+#define cpumask_of_node(node) ((node) == -1 ? \
+ cpu_all_mask : \
+ &numa_cpumask_lookup_table[node])
int of_node_to_nid(struct device_node *device);
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 678f98c..3ef743f 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -542,11 +542,11 @@
FixupDAR:/* Entry point for dcbx workaround. */
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
+ andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
DO_8xx_CPU6(0x3780, r3)
mtspr SPRN_MD_EPN, r10
mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */
- cmplwi cr0, r11, 0x0800
- blt- 3f /* Branch if user space */
+ beq- 3f /* Branch if user space */
lis r11, (swapper_pg_dir-PAGE_OFFSET)@h
ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
rlwimi r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */
@@ -768,12 +768,12 @@
*/
initial_mmu:
tlbia /* Invalidate all TLB entries */
-#ifdef CONFIG_PIN_TLB
+/* Always pin the first 8 MB ITLB to prevent ITLB
+ misses while mucking around with SRR0/SRR1 in asm
+*/
lis r8, MI_RSV4I@h
ori r8, r8, 0x1c00
-#else
- li r8, 0
-#endif
+
mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */
#ifdef CONFIG_PIN_TLB
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 1be9fe3..8777fb0 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -262,19 +262,19 @@
if (rtas_node == NULL)
return -ENODEV;
- proc_create("ppc64/rtas/progress", S_IRUGO|S_IWUSR, NULL,
+ proc_create("powerpc/rtas/progress", S_IRUGO|S_IWUSR, NULL,
&ppc_rtas_progress_operations);
- proc_create("ppc64/rtas/clock", S_IRUGO|S_IWUSR, NULL,
+ proc_create("powerpc/rtas/clock", S_IRUGO|S_IWUSR, NULL,
&ppc_rtas_clock_operations);
- proc_create("ppc64/rtas/poweron", S_IWUSR|S_IRUGO, NULL,
+ proc_create("powerpc/rtas/poweron", S_IWUSR|S_IRUGO, NULL,
&ppc_rtas_poweron_operations);
- proc_create("ppc64/rtas/sensors", S_IRUGO, NULL,
+ proc_create("powerpc/rtas/sensors", S_IRUGO, NULL,
&ppc_rtas_sensors_operations);
- proc_create("ppc64/rtas/frequency", S_IWUSR|S_IRUGO, NULL,
+ proc_create("powerpc/rtas/frequency", S_IWUSR|S_IRUGO, NULL,
&ppc_rtas_tone_freq_operations);
- proc_create("ppc64/rtas/volume", S_IWUSR|S_IRUGO, NULL,
+ proc_create("powerpc/rtas/volume", S_IWUSR|S_IRUGO, NULL,
&ppc_rtas_tone_volume_operations);
- proc_create("ppc64/rtas/rmo_buffer", S_IRUSR, NULL,
+ proc_create("powerpc/rtas/rmo_buffer", S_IRUSR, NULL,
&ppc_rtas_rmo_buf_ops);
return 0;
}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index a521fb8..c2ee144 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -619,4 +619,16 @@
if (smp_ops->cpu_die)
smp_ops->cpu_die(cpu);
}
+
+static DEFINE_MUTEX(powerpc_cpu_hotplug_driver_mutex);
+
+void cpu_hotplug_driver_lock()
+{
+ mutex_lock(&powerpc_cpu_hotplug_driver_mutex);
+}
+
+void cpu_hotplug_driver_unlock()
+{
+ mutex_unlock(&powerpc_cpu_hotplug_driver_mutex);
+}
#endif
diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S
index b47d8ce..b0754e2 100644
--- a/arch/powerpc/kernel/swsusp_32.S
+++ b/arch/powerpc/kernel/swsusp_32.S
@@ -303,7 +303,7 @@
lis r4,0x1000
1: addic. r4,r4,-0x1000
tlbie r4
- blt 1b
+ bgt 1b
sync
/* restore the MSR and turn on the MMU */
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 9ba2cc8..6c6093d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -903,12 +903,21 @@
decrementer_set_next_event(DECREMENTER_MAX, dev);
}
+static inline uint64_t div_sc64(unsigned long ticks, unsigned long nsec,
+ int shift)
+{
+ uint64_t tmp = ((uint64_t)ticks) << shift;
+
+ do_div(tmp, nsec);
+ return tmp;
+}
+
static void __init setup_clockevent_multiplier(unsigned long hz)
{
u64 mult, shift = 32;
while (1) {
- mult = div_sc(hz, NSEC_PER_SEC, shift);
+ mult = div_sc64(hz, NSEC_PER_SEC, shift);
if (mult && (mult >> 32UL) == 0UL)
break;
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index b9b1525..311224c 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -494,13 +494,13 @@
* This must always be called with the pte lock held.
*/
void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
- pte_t pte)
+ pte_t *ptep)
{
#ifdef CONFIG_PPC_STD_MMU
unsigned long access = 0, trap;
/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
- if (!pte_young(pte) || address >= TASK_SIZE)
+ if (!pte_young(*ptep) || address >= TASK_SIZE)
return;
/* We try to figure out if we are coming from an instruction
diff --git a/arch/powerpc/mm/mmap_64.c b/arch/powerpc/mm/mmap_64.c
index 0d957a4..5a783d8 100644
--- a/arch/powerpc/mm/mmap_64.c
+++ b/arch/powerpc/mm/mmap_64.c
@@ -47,7 +47,7 @@
if (current->personality & ADDR_COMPAT_LAYOUT)
return 1;
- if (current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY)
+ if (rlimit(RLIMIT_STACK) == RLIM_INFINITY)
return 1;
return sysctl_legacy_va_layout;
@@ -77,7 +77,7 @@
static inline unsigned long mmap_base(void)
{
- unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+ unsigned long gap = rlimit(RLIMIT_STACK);
if (gap < MIN_GAP)
gap = MIN_GAP;
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index c4d4a19..eea1202 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -54,7 +54,7 @@
*/
static int spufs_dump_write(struct file *file, const void *addr, int nr, loff_t *foffset)
{
- unsigned long limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
+ unsigned long limit = rlimit(RLIMIT_CORE);
ssize_t written;
if (*foffset + nr > limit)
diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c
index 657b72f..2aa8b56 100644
--- a/arch/powerpc/platforms/iseries/vio.c
+++ b/arch/powerpc/platforms/iseries/vio.c
@@ -474,6 +474,8 @@
struct vio_waitevent we;
int ret;
+ init_completion(&we.com);
+
ret = viopath_open(viopath_hostLp, viomajorsubtype_tape, 2);
if (ret) {
printk(KERN_WARNING "get_viotape_info: "
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 67b7a10..37bce52 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -236,7 +236,9 @@
int dlpar_attach_node(struct device_node *dn)
{
+#ifdef CONFIG_PROC_DEVICETREE
struct proc_dir_entry *ent;
+#endif
int rc;
of_node_set_flag(dn, OF_DYNAMIC);
@@ -267,10 +269,10 @@
int dlpar_detach_node(struct device_node *dn)
{
+#ifdef CONFIG_PROC_DEVICETREE
struct device_node *parent = dn->parent;
struct property *prop = dn->properties;
-#ifdef CONFIG_PROC_DEVICETREE
while (prop) {
remove_proc_entry(prop->name, dn->pde);
prop = prop->next;
@@ -344,20 +346,6 @@
#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-static DEFINE_MUTEX(pseries_cpu_hotplug_mutex);
-
-void cpu_hotplug_driver_lock(void)
-__acquires(pseries_cpu_hotplug_mutex)
-{
- mutex_lock(&pseries_cpu_hotplug_mutex);
-}
-
-void cpu_hotplug_driver_unlock(void)
-__releases(pseries_cpu_hotplug_mutex)
-{
- mutex_unlock(&pseries_cpu_hotplug_mutex);
-}
-
static int dlpar_online_cpu(struct device_node *dn)
{
int rc = 0;
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index b9b9e11..d80f193c 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -163,14 +163,13 @@
/* Interface to generic irq subsystem */
#ifdef CONFIG_SMP
-static int get_irq_server(unsigned int virq, unsigned int strict_check)
+static int get_irq_server(unsigned int virq, cpumask_t cpumask,
+ unsigned int strict_check)
{
int server;
/* For the moment only implement delivery to all cpus or one cpu */
- cpumask_t cpumask;
cpumask_t tmp = CPU_MASK_NONE;
- cpumask_copy(&cpumask, irq_to_desc(virq)->affinity);
if (!distribute_irqs)
return default_server;
@@ -192,7 +191,8 @@
return default_server;
}
#else
-static int get_irq_server(unsigned int virq, unsigned int strict_check)
+static int get_irq_server(unsigned int virq, cpumask_t cpumask,
+ unsigned int strict_check)
{
return default_server;
}
@@ -211,7 +211,7 @@
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
return;
- server = get_irq_server(virq, 0);
+ server = get_irq_server(virq, *(irq_to_desc(virq)->affinity), 0);
call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
DEFAULT_PRIORITY);
@@ -405,7 +405,7 @@
* For the moment only implement delivery to all cpus or one cpu.
* Get current irq_server for the given irq
*/
- irq_server = get_irq_server(virq, 1);
+ irq_server = get_irq_server(virq, *cpumask, 1);
if (irq_server == -1) {
char cpulist[128];
cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h
index efb74fd..b1066b9 100644
--- a/arch/s390/include/asm/bug.h
+++ b/arch/s390/include/asm/bug.h
@@ -52,6 +52,10 @@
unreachable(); \
} while (0)
+#define __WARN() do { \
+ __EMIT_BUG(BUGFLAG_WARNING); \
+} while (0)
+
#define WARN_ON(x) ({ \
int __ret_warn_on = !!(x); \
if (__builtin_constant_p(__ret_warn_on)) { \
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index e2fa79c..9b5b918 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -43,7 +43,7 @@
* The S390 doesn't have any external MMU info: the kernel page
* tables contain all the necessary information.
*/
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
/*
* ZERO_PAGE is a global shared page that is always zero: used
diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h
index ec403d4..f72d611 100644
--- a/arch/s390/include/asm/sigp.h
+++ b/arch/s390/include/asm/sigp.h
@@ -15,11 +15,19 @@
#ifndef __SIGP__
#define __SIGP__
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
+#include <asm/system.h>
/* get real cpu address from logical cpu number */
-extern volatile int __cpu_logical_map[];
+extern int __cpu_logical_map[];
+
+static inline int cpu_logical_map(int cpu)
+{
+#ifdef CONFIG_SMP
+ return __cpu_logical_map[cpu];
+#else
+ return stap();
+#endif
+}
typedef enum
{
@@ -79,7 +87,7 @@
" ipm %0\n"
" srl %0,28\n"
: "=d" (ccode)
- : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+ : "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
"a" (order_code) : "cc" , "memory");
return ccode;
}
@@ -98,7 +106,7 @@
" ipm %0\n"
" srl %0,28\n"
: "=d" (ccode)
- : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+ : "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
"a" (order_code) : "cc" , "memory");
return ccode;
}
@@ -118,7 +126,7 @@
" ipm %0\n"
" srl %0,28\n"
: "=d" (ccode), "+d" (reg1)
- : "d" (__cpu_logical_map[cpu_addr]), "a" (order_code)
+ : "d" (cpu_logical_map(cpu_addr)), "a" (order_code)
: "cc" , "memory");
*statusptr = reg1;
return ccode;
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 07eb61b..66069e7 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -93,13 +93,12 @@
#define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */
#define TIF_SECCOMP 10 /* secure computing */
#define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */
-#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling
+#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
-#define TIF_31BIT 18 /* 32bit process */
-#define TIF_MEMDIE 19
-#define TIF_RESTORE_SIGMASK 20 /* restore signal mask in do_signal() */
-#define TIF_FREEZE 21 /* thread is freezing for suspend */
+#define TIF_31BIT 17 /* 32bit process */
+#define TIF_MEMDIE 18
+#define TIF_RESTORE_SIGMASK 19 /* restore signal mask in do_signal() */
+#define TIF_FREEZE 20 /* thread is freezing for suspend */
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
@@ -112,7 +111,6 @@
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
-#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_31BIT (1<<TIF_31BIT)
#define _TIF_FREEZE (1<<TIF_FREEZE)
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index 192a720..6e9f049 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -269,8 +269,7 @@
#define __NR_pwritev 329
#define __NR_rt_tgsigqueueinfo 330
#define __NR_perf_event_open 331
-#define __NR_recvmmsg 332
-#define NR_syscalls 333
+#define NR_syscalls 332
/*
* There are some system calls that are not present on 64 bit, some
@@ -377,6 +376,9 @@
#define __IGNORE_migrate_pages
#define __IGNORE_move_pages
+/* Ignore system calls that are also reachable via sys_socket */
+#define __IGNORE_recvmmsg
+
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_SYS_ALARM
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 22c9e55..11c3aba 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -616,44 +616,35 @@
*/
struct mmap_arg_struct_emu31 {
- u32 addr;
- u32 len;
- u32 prot;
- u32 flags;
- u32 fd;
- u32 offset;
+ compat_ulong_t addr;
+ compat_ulong_t len;
+ compat_ulong_t prot;
+ compat_ulong_t flags;
+ compat_ulong_t fd;
+ compat_ulong_t offset;
};
-asmlinkage unsigned long
-old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
+asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
{
struct mmap_arg_struct_emu31 a;
- int error = -EFAULT;
if (copy_from_user(&a, arg, sizeof(a)))
- goto out;
-
- error = -EINVAL;
+ return -EFAULT;
if (a.offset & ~PAGE_MASK)
- goto out;
-
- error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
- a.offset >> PAGE_SHIFT);
-out:
- return error;
+ return -EINVAL;
+ a.addr = (unsigned long) compat_ptr(a.addr);
+ return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+ a.offset >> PAGE_SHIFT);
}
-asmlinkage long
-sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
+asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
{
struct mmap_arg_struct_emu31 a;
- int error = -EFAULT;
if (copy_from_user(&a, arg, sizeof(a)))
- goto out;
- error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
-out:
- return error;
+ return -EFAULT;
+ a.addr = (unsigned long) compat_ptr(a.addr);
+ return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
}
asmlinkage long sys32_read(unsigned int fd, char __user * buf, size_t count)
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index faeaccc..30de2d0 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1853,12 +1853,3 @@
llgtr %r3,%r3 # compat_uptr_t *
llgtr %r4,%r4 # compat_uptr_t *
jg sys32_execve # branch to system call
-
- .globl compat_sys_recvmmsg_wrapper
-compat_sys_recvmmsg_wrapper:
- lgfr %r2,%r2 # int
- llgtr %r3,%r3 # struct compat_mmsghdr *
- llgfr %r4,%r4 # unsigned int
- llgfr %r5,%r5 # unsigned int
- llgtr %r6,%r6 # struct compat_timespec *
- jg compat_sys_recvmmsg
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 5417eb5..00b6d1d 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -153,8 +153,6 @@
void flush_thread(void)
{
- clear_used_math();
- clear_tsk_thread_flag(current, TIF_USEDFPU);
}
void release_thread(struct task_struct *dead_task)
@@ -217,6 +215,7 @@
p->thread.mm_segment = get_fs();
/* Don't copy debug registers */
memset(&p->thread.per_info, 0, sizeof(p->thread.per_info));
+ clear_tsk_thread_flag(p, TIF_SINGLE_STEP);
/* Initialize per thread user and system timer values */
ti = task_thread_info(p);
ti->user_timer = 0;
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 13815d3..7cf4642 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -65,6 +65,7 @@
{
struct pt_regs *regs;
per_struct *per_info;
+ per_cr_words cr_words;
regs = task_pt_regs(task);
per_info = (per_struct *) &task->thread.per_info;
@@ -98,6 +99,13 @@
per_info->control_regs.bits.storage_alt_space_ctl = 1;
else
per_info->control_regs.bits.storage_alt_space_ctl = 0;
+
+ if (task == current) {
+ __ctl_store(cr_words, 9, 11);
+ if (memcmp(&cr_words, &per_info->control_regs.words,
+ sizeof(cr_words)) != 0)
+ __ctl_load(per_info->control_regs.words, 9, 11);
+ }
}
void user_enable_single_step(struct task_struct *task)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 0663287..8d8957b 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -87,7 +87,6 @@
char elf_platform[ELF_PLATFORM_SIZE];
struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
-volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
int __initdata memory_end_set;
unsigned long __initdata memory_end;
@@ -124,12 +123,6 @@
*/
get_cpu_id(&S390_lowcore.cpu_id);
- /*
- * Force FPU initialization:
- */
- clear_thread_flag(TIF_USEDFPU);
- clear_used_math();
-
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
BUG_ON(current->mm);
@@ -855,7 +848,6 @@
setup_lowcore();
cpu_init();
- __cpu_logical_map[0] = stap();
s390_init_cpu_topology();
/*
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 6b4fef8..1675c48 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -500,18 +500,10 @@
clear_thread_flag(TIF_RESTORE_SIGMASK);
/*
- * If we would have taken a single-step trap
- * for a normal instruction, act like we took
- * one for the handler setup.
- */
- if (current->thread.per_info.single_step)
- set_thread_flag(TIF_SINGLE_STEP);
-
- /*
* Let tracing know that we've done the handler setup.
*/
tracehook_signal_handler(signr, &info, &ka, regs,
- test_thread_flag(TIF_SINGLE_STEP));
+ current->thread.per_info.single_step);
}
return;
}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 93e5203..76a6fdd 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -52,6 +52,9 @@
#include <asm/cpu.h>
#include "entry.h"
+/* logical cpu to cpu address */
+int __cpu_logical_map[NR_CPUS];
+
static struct task_struct *current_set[NR_CPUS];
static u8 smp_cpu_type;
@@ -717,6 +720,12 @@
{
}
+void __init smp_setup_processor_id(void)
+{
+ S390_lowcore.cpu_nr = 0;
+ __cpu_logical_map[0] = stap();
+}
+
/*
* the frequency of the profiling timer can be changed
* by writing a multiplier value into /proc/profile.
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 4f292c9..30eca07 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -340,4 +340,3 @@
SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */
SYSCALL(sys_perf_event_open,sys_perf_event_open,sys_perf_event_open_wrapper)
-SYSCALL(sys_recvmmsg,sys_recvmmsg,compat_sys_recvmmsg_wrapper)
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 3c72c9c..14ef6f0 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -114,7 +114,7 @@
rcpu = CPU_BITS - 1 - cpu + tl_cpu->origin;
for_each_present_cpu(lcpu) {
- if (__cpu_logical_map[lcpu] == rcpu) {
+ if (cpu_logical_map(lcpu) == rcpu) {
cpu_set(lcpu, core->mask);
smp_cpu_polarization[lcpu] = tl_cpu->pp;
}
diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c
index 10754a3..cff327f 100644
--- a/arch/s390/lib/spinlock.c
+++ b/arch/s390/lib/spinlock.c
@@ -34,7 +34,7 @@
{
if (MACHINE_HAS_DIAG9C)
asm volatile("diag %0,0,0x9c"
- : : "d" (__cpu_logical_map[cpu]));
+ : : "d" (cpu_logical_map(cpu)));
else
_raw_yield();
}
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index f4558cc..869efba 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -40,7 +40,7 @@
static inline unsigned long mmap_base(void)
{
- unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+ unsigned long gap = rlimit(RLIMIT_STACK);
if (gap < MIN_GAP)
gap = MIN_GAP;
@@ -61,7 +61,7 @@
#endif
return sysctl_legacy_va_layout ||
(current->personality & ADDR_COMPAT_LAYOUT) ||
- current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY;
+ rlimit(RLIMIT_STACK) == RLIM_INFINITY;
}
#ifndef CONFIG_64BIT
diff --git a/arch/score/include/asm/pgtable.h b/arch/score/include/asm/pgtable.h
index 674934b..ccf38f0 100644
--- a/arch/score/include/asm/pgtable.h
+++ b/arch/score/include/asm/pgtable.h
@@ -272,8 +272,9 @@
unsigned long address, pte_t pte);
static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
+ pte_t pte = *ptep;
__update_tlb(vma, address, pte);
__update_cache(vma, address, pte);
}
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 6a8861b..5c24628 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -353,6 +353,10 @@
{
I2C_BOARD_INFO("r2025sd", 0x32),
},
+ {
+ I2C_BOARD_INFO("lis3lv02d", 0x1c),
+ .irq = 33,
+ }
};
/* KEYSC */
@@ -1115,6 +1119,10 @@
gpio_direction_output(GPIO_PTU0, 0);
mdelay(20);
+ /* enable motion sensor */
+ gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+ gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
/* enable I2C device */
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index ba3046e..1ff93ac 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -165,8 +165,9 @@
unsigned long address, pte_t pte);
static inline void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
+ pte_t pte = *ptep;
__update_cache(vma, address, pte);
__update_tlb(vma, address, pte);
}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 4753010..1677b5e 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -371,7 +371,7 @@
local_flush_tlb_one(get_asid(), address & PAGE_MASK);
#endif
- update_mmu_cache(NULL, address, entry);
+ update_mmu_cache(NULL, address, pte);
return 0;
}
diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
index 558a56b..2082af1 100644
--- a/arch/sh/tools/Makefile
+++ b/arch/sh/tools/Makefile
@@ -13,4 +13,4 @@
include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
@echo ' Generating $@'
$(Q)mkdir -p $(dir $@)
- $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
+ $(Q)LC_ALL=C $(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index e0cabe7..77f906d 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -330,9 +330,9 @@
#define FAULT_CODE_WRITE 0x2
#define FAULT_CODE_USER 0x4
-BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t *)
-#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+#define update_mmu_cache(vma,addr,ptep) BTFIXUP_CALL(update_mmu_cache)(vma,addr,ptep)
BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
unsigned long, unsigned int)
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index f3cb790..f5b5fa7 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -706,7 +706,7 @@
#define mmu_unlockarea(vaddr, len) do { } while(0)
struct vm_area_struct;
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
/* Encode and de-code a swap entry */
#define __swp_type(entry) (((entry).val >> PAGE_SHIFT) & 0xffUL)
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index b99f81c..43e20ef 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -370,7 +370,7 @@
unsigned long address)
{
extern void sun4c_update_mmu_cache(struct vm_area_struct *,
- unsigned long,pte_t);
+ unsigned long,pte_t *);
extern pte_t *sun4c_pte_offset_kernel(pmd_t *,unsigned long);
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
@@ -447,7 +447,7 @@
* on the CPU and doing a shrink_mmap() on this vma.
*/
sun4c_update_mmu_cache (find_vma(current->mm, address), address,
- *ptep);
+ ptep);
else
do_sparc_fault(regs, text_fault, write, address);
}
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 1886d37..9245a82 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -289,12 +289,13 @@
}
}
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
struct mm_struct *mm;
struct tsb *tsb;
unsigned long tag, flags;
unsigned long tsb_index, tsb_hash_shift;
+ pte_t pte = *ptep;
if (tlb_type != hypervisor) {
unsigned long pfn = pte_pfn(pte);
diff --git a/arch/sparc/mm/nosun4c.c b/arch/sparc/mm/nosun4c.c
index 196263f..4e62c27 100644
--- a/arch/sparc/mm/nosun4c.c
+++ b/arch/sparc/mm/nosun4c.c
@@ -62,7 +62,7 @@
return NULL;
}
-void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 367321a..df49b20 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -694,7 +694,7 @@
* The following code is a deadwood that may be necessary when
* we start to make precise page flushes again. --zaitcev
*/
-static void swift_update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t pte)
+static void swift_update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t *ptep)
{
#if 0
static unsigned long last;
@@ -703,10 +703,10 @@
if (address == last) {
val = srmmu_hwprobe(address);
- if (val != 0 && pte_val(pte) != val) {
+ if (val != 0 && pte_val(*ptep) != val) {
printk("swift_update_mmu_cache: "
"addr %lx put %08x probed %08x from %p\n",
- address, pte_val(pte), val,
+ address, pte_val(*ptep), val,
__builtin_return_address(0));
srmmu_flush_whole_tlb();
}
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index a89baf0..1865253 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -1887,7 +1887,7 @@
/* An experiment, turn off by default for now... -DaveM */
#define SUN4C_PRELOAD_PSEG
-void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
unsigned long flags;
int pseg;
@@ -1929,7 +1929,7 @@
start += PAGE_SIZE;
}
#ifndef SUN4C_PRELOAD_PSEG
- sun4c_put_pte(address, pte_val(pte));
+ sun4c_put_pte(address, pte_val(*ptep));
#endif
local_irq_restore(flags);
return;
@@ -1940,7 +1940,7 @@
add_lru(entry);
}
- sun4c_put_pte(address, pte_val(pte));
+ sun4c_put_pte(address, pte_val(*ptep));
local_irq_restore(flags);
}
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 5106924..3b3c366 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -125,50 +125,36 @@
void mconsole_proc(struct mc_request *req)
{
struct nameidata nd;
- struct file_system_type *proc;
- struct super_block *super;
+ struct vfsmount *mnt = current->nsproxy->pid_ns->proc_mnt;
struct file *file;
int n, err;
char *ptr = req->request.data, *buf;
+ mm_segment_t old_fs = get_fs();
ptr += strlen("proc");
ptr = skip_spaces(ptr);
- proc = get_fs_type("proc");
- if (proc == NULL) {
- mconsole_reply(req, "procfs not registered", 1, 0);
- goto out;
- }
-
- super = (*proc->get_sb)(proc, 0, NULL, NULL);
- put_filesystem(proc);
- if (super == NULL) {
- mconsole_reply(req, "Failed to get procfs superblock", 1, 0);
- goto out;
- }
- up_write(&super->s_umount);
-
- nd.path.dentry = super->s_root;
- nd.path.mnt = NULL;
- nd.flags = O_RDONLY + 1;
- nd.last_type = LAST_ROOT;
-
- /* START: it was experienced that the stability problems are closed
- * if commenting out these two calls + the below read cycle. To
- * make UML crash again, it was enough to readd either one.*/
- err = link_path_walk(ptr, &nd);
+ err = vfs_path_lookup(mnt->mnt_root, mnt, ptr, LOOKUP_FOLLOW, &nd);
if (err) {
mconsole_reply(req, "Failed to look up file", 1, 0);
- goto out_kill;
+ goto out;
+ }
+
+ err = may_open(&nd.path, MAY_READ, FMODE_READ);
+ if (result) {
+ mconsole_reply(req, "Failed to open file", 1, 0);
+ path_put(&nd.path);
+ goto out;
}
file = dentry_open(nd.path.dentry, nd.path.mnt, O_RDONLY,
current_cred());
+ err = PTR_ERR(file);
if (IS_ERR(file)) {
mconsole_reply(req, "Failed to open file", 1, 0);
- goto out_kill;
+ path_put(&nd.path);
+ goto out;
}
- /*END*/
buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (buf == NULL) {
@@ -176,10 +162,13 @@
goto out_fput;
}
- if ((file->f_op != NULL) && (file->f_op->read != NULL)) {
+ if (file->f_op->read) {
do {
- n = (*file->f_op->read)(file, buf, PAGE_SIZE - 1,
- &file->f_pos);
+ loff_t pos;
+ set_fs(KERNEL_DS);
+ n = vfs_read(file, buf, PAGE_SIZE - 1, &pos);
+ file_pos_write(file, pos);
+ set_fs(old_fs);
if (n >= 0) {
buf[n] = '\0';
mconsole_reply(req, buf, 0, (n > 0));
@@ -197,8 +186,6 @@
kfree(buf);
out_fput:
fput(file);
- out_kill:
- deactivate_super(super);
out: ;
}
#endif
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index 9ce3f16..a9f7251 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -345,7 +345,7 @@
struct mm_struct;
extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
-#define update_mmu_cache(vma,address,pte) do ; while (0)
+#define update_mmu_cache(vma,address,ptep) do ; while (0)
/* Encode and de-code a swap entry */
#define __swp_type(x) (((x).val >> 4) & 0x3f)
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 858baa0..6c3fdd6 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -108,10 +108,11 @@
#define K8_MCE_THRESHOLD_BANK_5 (MCE_THRESHOLD_BASE + 5 * 9)
#define K8_MCE_THRESHOLD_DRAM_ECC (MCE_THRESHOLD_BANK_4 + 0)
-extern struct atomic_notifier_head x86_mce_decoder_chain;
#ifdef __KERNEL__
+extern struct atomic_notifier_head x86_mce_decoder_chain;
+
#include <linux/percpu.h>
#include <linux/init.h>
#include <asm/atomic.h>
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 01fd946..a286683 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -80,7 +80,7 @@
* The i386 doesn't have any external MMU info: the kernel page
* tables contain all the necessary information.
*/
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
#endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index c57a301..181be52 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -129,7 +129,7 @@
#define pte_unmap(pte) /* NOP */
#define pte_unmap_nested(pte) /* NOP */
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
/* Encode and de-code a swap entry */
#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index bc54fa9..40be813 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -495,5 +495,17 @@
uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
}
+/*
+ * Get the minimum revision number of the hub chips within the partition.
+ * 1 - initial rev 1.0 silicon
+ * 2 - rev 2.0 production silicon
+ */
+static inline int uv_get_min_hub_revision_id(void)
+{
+ extern int uv_min_hub_revision_id;
+
+ return uv_min_hub_revision_id;
+}
+
#endif /* CONFIG_X86_64 */
#endif /* _ASM_X86_UV_UV_HUB_H */
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 3704997..f147a95 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -31,6 +31,7 @@
#include <asm/x86_init.h>
int gart_iommu_aperture;
+EXPORT_SYMBOL_GPL(gart_iommu_aperture);
int gart_iommu_aperture_disabled __initdata;
int gart_iommu_aperture_allowed __initdata;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index e80f291..3987e44 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -61,12 +61,6 @@
/*
* The highest APIC ID seen during enumeration.
- *
- * This determines the messaging protocol we can use: if all APIC IDs
- * are in the 0 ... 7 range, then we can use logical addressing which
- * has some performance advantages (better broadcasting).
- *
- * If there's an APIC ID above 8, we use physical addressing.
*/
unsigned int max_physical_apicid;
@@ -1898,14 +1892,7 @@
max_physical_apicid = apicid;
#ifdef CONFIG_X86_32
- /*
- * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
- * but we need to work other dependencies like SMP_SUSPEND etc
- * before this can be done without some confusion.
- * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
- * - Ashok Raj <ashok.raj@intel.com>
- */
- if (max_physical_apicid >= 8) {
+ if (num_processors > 8) {
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_INTEL:
if (!APIC_XAPIC(version)) {
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index eacbd2b..e3c3d82 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -240,6 +240,11 @@
printk(KERN_DEBUG "system APIC only can use physical flat");
return 1;
}
+
+ if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
+ printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
+ return 1;
+ }
#endif
return 0;
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 65edc18..450fe20 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -64,15 +64,13 @@
apic = &apic_x2apic_phys;
else
apic = &apic_x2apic_cluster;
- printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
}
#endif
- if (apic == &apic_flat) {
- if (max_physical_apicid >= 8)
+ if (apic == &apic_flat && num_processors > 8)
apic = &apic_physflat;
- printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
- }
+
+ printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
if (is_vsmp_box()) {
/* need to update phys_pkg_id */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 5f92494..21db3cb 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -36,6 +36,8 @@
static enum uv_system_type uv_system_type;
static u64 gru_start_paddr, gru_end_paddr;
+int uv_min_hub_revision_id;
+EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
static inline bool is_GRU_range(u64 start, u64 end)
{
@@ -55,12 +57,19 @@
mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
node_id.v = *mmr;
early_iounmap(mmr, sizeof(*mmr));
+
+ /* Currently, all blades have same revision number */
+ uv_min_hub_revision_id = node_id.s.revision;
+
return node_id.s.node_id;
}
static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
+ int nodeid;
+
if (!strcmp(oem_id, "SGI")) {
+ nodeid = early_get_nodeid();
x86_platform.is_untracked_pat_range = uv_is_untracked_pat_range;
if (!strcmp(oem_table_id, "UVL"))
uv_system_type = UV_LEGACY_APIC;
@@ -68,7 +77,7 @@
uv_system_type = UV_X2APIC;
else if (!strcmp(oem_table_id, "UVH")) {
__get_cpu_var(x2apic_extra_bits) =
- early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
+ nodeid << (UV_APIC_PNODE_SHIFT - 1);
uv_system_type = UV_NON_UNIQUE_APIC;
return 1;
}
@@ -374,13 +383,13 @@
enum map_type {map_wb, map_uc};
-static __init void map_high(char *id, unsigned long base, int shift,
- int max_pnode, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int pshift,
+ int bshift, int max_pnode, enum map_type map_type)
{
unsigned long bytes, paddr;
- paddr = base << shift;
- bytes = (1UL << shift) * (max_pnode + 1);
+ paddr = base << pshift;
+ bytes = (1UL << bshift) * (max_pnode + 1);
printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
paddr + bytes);
if (map_type == map_uc)
@@ -396,7 +405,7 @@
gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
if (gru.s.enable) {
- map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
+ map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
gru_start_paddr = ((u64)gru.s.base << shift);
gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
@@ -410,7 +419,7 @@
mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
if (mmr.s.enable)
- map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
+ map_high("MMR", mmr.s.base, shift, shift, max_pnode, map_uc);
}
static __init void map_mmioh_high(int max_pnode)
@@ -420,7 +429,8 @@
mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
if (mmioh.s.enable)
- map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
+ map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io,
+ max_pnode, map_uc);
}
static __init void map_low_mmrs(void)
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index c56bc28..6d81755 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -123,13 +123,15 @@
while (valid_stack_ptr(tinfo, ret_addr, sizeof(*ret_addr), end)) {
unsigned long addr = *ret_addr;
- if (__kernel_text_address(addr)) {
- ops->address(data, addr, 1);
- frame = frame->next_frame;
- ret_addr = &frame->return_address;
- print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
- }
+ if (!__kernel_text_address(addr))
+ break;
+
+ ops->address(data, addr, 1);
+ frame = frame->next_frame;
+ ret_addr = &frame->return_address;
+ print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
}
+
return (unsigned long)frame;
}
EXPORT_SYMBOL_GPL(print_context_stack_bp);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index c6ee241..02c3ee0 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -288,6 +288,8 @@
regs.es = __USER_DS;
regs.fs = __KERNEL_PERCPU;
regs.gs = __KERNEL_STACK_CANARY;
+#else
+ regs.ss = __KERNEL_DS;
#endif
regs.orig_ax = -1;
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 2b26dd5..36daccb 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1151,9 +1151,13 @@
/* keep using Xen gdt for now; no urgent need to change it */
+#ifdef CONFIG_X86_32
pv_info.kernel_rpl = 1;
if (xen_feature(XENFEAT_supervisor_mode_kernel))
pv_info.kernel_rpl = 0;
+#else
+ pv_info.kernel_rpl = 0;
+#endif
/* set the limit of our address space */
xen_reserve_top();
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index a138770..76bf355 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -394,7 +394,7 @@
#define kern_addr_valid(addr) (1)
extern void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte);
+ unsigned long address, pte_t *ptep);
/*
* remap a physical page `pfn' of size `size' with page protection `prot'
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index 3ba990c..85df465 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -147,9 +147,9 @@
#endif
void
-update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t pte)
+update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t *ptep)
{
- unsigned long pfn = pte_pfn(pte);
+ unsigned long pfn = pte_pfn(*ptep);
struct page *page;
if (!pfn_valid(pfn))
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index d7d77d4..ae6b6c4 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -309,17 +309,19 @@
* Block size attribute stuff
*/
static ssize_t
-print_block_size(struct class *class, char *buf)
+print_block_size(struct sysdev_class *class,
+ struct sysdev_class_attribute *class_attr,
+ char *buf)
{
- return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
+ return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
}
-static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
+static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
static int block_size_init(void)
{
return sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &class_attr_block_size_bytes.attr);
+ &attr_block_size_bytes.attr);
}
/*
@@ -330,7 +332,9 @@
*/
#ifdef CONFIG_ARCH_MEMORY_PROBE
static ssize_t
-memory_probe_store(struct class *class, const char *buf, size_t count)
+memory_probe_store(struct sysdev_class *class,
+ struct sysdev_class_attribute *class_attr,
+ const char *buf, size_t count)
{
u64 phys_addr;
int nid;
@@ -346,12 +350,12 @@
return count;
}
-static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store);
+static SYSDEV_CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store);
static int memory_probe_init(void)
{
return sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &class_attr_probe.attr);
+ &attr_probe.attr);
}
#else
static inline int memory_probe_init(void)
@@ -367,7 +371,9 @@
/* Soft offline a page */
static ssize_t
-store_soft_offline_page(struct class *class, const char *buf, size_t count)
+store_soft_offline_page(struct sysdev_class *class,
+ struct sysdev_class_attribute *class_attr,
+ const char *buf, size_t count)
{
int ret;
u64 pfn;
@@ -384,7 +390,9 @@
/* Forcibly offline a page, including killing processes. */
static ssize_t
-store_hard_offline_page(struct class *class, const char *buf, size_t count)
+store_hard_offline_page(struct sysdev_class *class,
+ struct sysdev_class_attribute *class_attr,
+ const char *buf, size_t count)
{
int ret;
u64 pfn;
@@ -397,18 +405,18 @@
return ret ? ret : count;
}
-static CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page);
-static CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page);
+static SYSDEV_CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page);
+static SYSDEV_CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page);
static __init int memory_fail_init(void)
{
int err;
err = sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &class_attr_soft_offline_page.attr);
+ &attr_soft_offline_page.attr);
if (!err)
err = sysfs_create_file(&memory_sysdev_class.kset.kobj,
- &class_attr_hard_offline_page.attr);
+ &attr_hard_offline_page.attr);
return err;
}
#else
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 31be3ac..e023682 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -669,7 +669,7 @@
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
- depends on PPC_PSERIES
+ depends on PPC_PSERIES && HVC_CONSOLE
help
Partitionable IBM Power5 ppc64 machines allow hosting of
firmware virtual consoles from one Linux partition by
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 5aa7a58..1afb896 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -725,12 +725,11 @@
int __init agp_amd64_init(void)
{
int err = 0;
- static int done = 0;
if (agp_off)
return -EINVAL;
- if (done++)
+ if (gart_iommu_aperture)
return agp_bridges_found ? 0 : -ENODEV;
err = pci_register_driver(&agp_amd64_pci_driver);
@@ -771,6 +770,8 @@
static void __exit agp_amd64_cleanup(void)
{
+ if (gart_iommu_aperture)
+ return;
if (aperture_resource)
release_resource(aperture_resource);
pci_unregister_driver(&agp_amd64_pci_driver);
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 30c36ac..3999a5f 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -2460,10 +2460,14 @@
&bridge->mode);
}
- if (bridge->driver->mask_memory == intel_i965_mask_memory)
+ if (bridge->driver->mask_memory == intel_i965_mask_memory) {
if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36)))
dev_err(&intel_private.pcidev->dev,
"set gfx device dma mask 36bit failed!\n");
+ else
+ pci_set_consistent_dma_mask(intel_private.pcidev,
+ DMA_BIT_MASK(36));
+ }
pci_set_drvdata(pdev, bridge);
return agp_add_bridge(bridge);
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index bdaef8e9..64fe0a7 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -114,7 +114,7 @@
{ 0 },
};
-static struct virtio_driver virtio_rng = {
+static struct virtio_driver virtio_rng_driver = {
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
@@ -124,12 +124,12 @@
static int __init init(void)
{
- return register_virtio_driver(&virtio_rng);
+ return register_virtio_driver(&virtio_rng_driver);
}
static void __exit fini(void)
{
- unregister_virtio_driver(&virtio_rng);
+ unregister_virtio_driver(&virtio_rng_driver);
}
module_init(init);
module_exit(fini);
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index c5facd9..000dc67 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -197,7 +197,7 @@
edac_printk(KERN_DEBUG, EDAC_MC,
"pci-read, sdram scrub control value: %d \n", scrubval);
- for (i = 0; ARRAY_SIZE(scrubrates); i++) {
+ for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
if (scrubrates[i].scrubval == scrubval) {
*bw = scrubrates[i].bandwidth;
status = 0;
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index 77a9579..adc10a2 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -577,7 +577,13 @@
debugf0("\tUncorrected bits= 0x%x\n", ue_errors);
branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd);
- channel = branch;
+
+ /*
+ * According with i5000 datasheet, bit 28 has no significance
+ * for errors M4Err-M12Err and M17Err-M21Err, on FERR_NF_FBD
+ */
+ channel = branch & 2;
+
bank = NREC_BANK(info->nrecmema);
rank = NREC_RANK(info->nrecmema);
rdwr = NREC_RDWR(info->nrecmema);
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 077313f..7d0f00a 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -702,7 +702,7 @@
if (encoder->crtc != crtc)
continue;
- DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
+ DRM_DEBUG("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
mode->name, mode->base.id);
encoder_funcs = encoder->helper_private;
encoder_funcs->mode_set(encoder, mode, adjusted_mode);
@@ -1032,7 +1032,8 @@
/*
* we shouldn't end up with no modes here.
*/
- printk(KERN_INFO "No connectors reported conncted with modes\n");
+ if (count == 0)
+ printk(KERN_INFO "No connectors reported connected with modes\n");
drm_setup_crtcs(dev);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index bbe4781..e660ac0 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -134,6 +134,10 @@
memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
+ if (IS_I965G(dev))
+ dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) &
+ 0xf0;
+
I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index be631cc..46d8896 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -45,6 +45,9 @@
unsigned int i915_powersave = 1;
module_param_named(powersave, i915_powersave, int, 0400);
+unsigned int i915_lvds_downclock = 0;
+module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+
static struct drm_driver driver;
#define INTEL_VGA_DEVICE(id, info) { \
@@ -464,8 +467,11 @@
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
.postclose = i915_driver_postclose,
+
+ /* Used in place of i915_pm_ops for non-DRIVER_MODESET */
.suspend = i915_suspend,
.resume = i915_resume,
+
.device_is_agp = i915_driver_device_is_agp,
.enable_vblank = i915_enable_vblank,
.disable_vblank = i915_disable_vblank,
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 29dd676..2c16694 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -283,6 +283,7 @@
unsigned int lvds_use_ssc:1;
unsigned int edp_support:1;
int lvds_ssc_freq;
+ int edp_bpp;
struct notifier_block lid_notifier;
@@ -722,6 +723,7 @@
extern int i915_max_ioctl;
extern unsigned int i915_fbpercrtc;
extern unsigned int i915_powersave;
+extern unsigned int i915_lvds_downclock;
extern void i915_save_display(struct drm_device *dev);
extern void i915_restore_display(struct drm_device *dev);
@@ -864,6 +866,7 @@
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
int write);
+int i915_gem_object_set_to_display_plane(struct drm_gem_object *obj);
int i915_gem_attach_phys_object(struct drm_device *dev,
struct drm_gem_object *obj, int id);
void i915_gem_detach_phys_object(struct drm_device *dev,
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 2748609..0c67924 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2837,6 +2837,57 @@
return 0;
}
+/*
+ * Prepare buffer for display plane. Use uninterruptible for possible flush
+ * wait, as in modesetting process we're not supposed to be interrupted.
+ */
+int
+i915_gem_object_set_to_display_plane(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ uint32_t old_write_domain, old_read_domains;
+ int ret;
+
+ /* Not valid to be called on unbound objects. */
+ if (obj_priv->gtt_space == NULL)
+ return -EINVAL;
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+
+ /* Wait on any GPU rendering and flushing to occur. */
+ if (obj_priv->active) {
+#if WATCH_BUF
+ DRM_INFO("%s: object %p wait for seqno %08x\n",
+ __func__, obj, obj_priv->last_rendering_seqno);
+#endif
+ ret = i915_do_wait_request(dev, obj_priv->last_rendering_seqno, 0);
+ if (ret != 0)
+ return ret;
+ }
+
+ old_write_domain = obj->write_domain;
+ old_read_domains = obj->read_domains;
+
+ obj->read_domains &= I915_GEM_DOMAIN_GTT;
+
+ i915_gem_object_flush_cpu_write_domain(obj);
+
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
+ */
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+ obj->read_domains |= I915_GEM_DOMAIN_GTT;
+ obj->write_domain = I915_GEM_DOMAIN_GTT;
+ obj_priv->dirty = 1;
+
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ old_write_domain);
+
+ return 0;
+}
+
/**
* Moves a single object to the CPU read, and possibly write domain.
*
@@ -4000,8 +4051,6 @@
"back to user (%d)\n",
args->buffer_count, ret);
}
- } else {
- DRM_ERROR("i915_gem_do_execbuffer returns %d\n", ret);
}
drm_free_large(exec_list);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 7cd8110..89a071a 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -274,7 +274,6 @@
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret = IRQ_NONE;
u32 de_iir, gt_iir, de_ier, pch_iir;
- u32 new_de_iir, new_gt_iir, new_pch_iir;
struct drm_i915_master_private *master_priv;
/* disable master interrupt before clearing iir */
@@ -286,51 +285,42 @@
gt_iir = I915_READ(GTIIR);
pch_iir = I915_READ(SDEIIR);
- for (;;) {
- if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
- break;
+ if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
+ goto done;
- ret = IRQ_HANDLED;
+ ret = IRQ_HANDLED;
- /* should clear PCH hotplug event before clear CPU irq */
- I915_WRITE(SDEIIR, pch_iir);
- new_pch_iir = I915_READ(SDEIIR);
-
- I915_WRITE(DEIIR, de_iir);
- new_de_iir = I915_READ(DEIIR);
- I915_WRITE(GTIIR, gt_iir);
- new_gt_iir = I915_READ(GTIIR);
-
- if (dev->primary->master) {
- master_priv = dev->primary->master->driver_priv;
- if (master_priv->sarea_priv)
- master_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
- }
-
- if (gt_iir & GT_USER_INTERRUPT) {
- u32 seqno = i915_get_gem_seqno(dev);
- dev_priv->mm.irq_gem_seqno = seqno;
- trace_i915_gem_request_complete(dev, seqno);
- DRM_WAKEUP(&dev_priv->irq_queue);
- dev_priv->hangcheck_count = 0;
- mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
- }
-
- if (de_iir & DE_GSE)
- ironlake_opregion_gse_intr(dev);
-
- /* check event from PCH */
- if ((de_iir & DE_PCH_EVENT) &&
- (pch_iir & SDE_HOTPLUG_MASK)) {
- queue_work(dev_priv->wq, &dev_priv->hotplug_work);
- }
-
- de_iir = new_de_iir;
- gt_iir = new_gt_iir;
- pch_iir = new_pch_iir;
+ if (dev->primary->master) {
+ master_priv = dev->primary->master->driver_priv;
+ if (master_priv->sarea_priv)
+ master_priv->sarea_priv->last_dispatch =
+ READ_BREADCRUMB(dev_priv);
}
+ if (gt_iir & GT_USER_INTERRUPT) {
+ u32 seqno = i915_get_gem_seqno(dev);
+ dev_priv->mm.irq_gem_seqno = seqno;
+ trace_i915_gem_request_complete(dev, seqno);
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ dev_priv->hangcheck_count = 0;
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
+ }
+
+ if (de_iir & DE_GSE)
+ ironlake_opregion_gse_intr(dev);
+
+ /* check event from PCH */
+ if ((de_iir & DE_PCH_EVENT) &&
+ (pch_iir & SDE_HOTPLUG_MASK)) {
+ queue_work(dev_priv->wq, &dev_priv->hotplug_work);
+ }
+
+ /* should clear PCH hotplug event before clear CPU irq */
+ I915_WRITE(SDEIIR, pch_iir);
+ I915_WRITE(GTIIR, gt_iir);
+ I915_WRITE(DEIIR, de_iir);
+
+done:
I915_WRITE(DEIER, de_ier);
(void)I915_READ(DEIER);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 149d360..847006c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1815,7 +1815,7 @@
#define DSPFW_PLANEB_SHIFT 8
#define DSPFW2 0x70038
#define DSPFW_CURSORA_MASK 0x00003f00
-#define DSPFW_CURSORA_SHIFT 16
+#define DSPFW_CURSORA_SHIFT 8
#define DSPFW3 0x7003c
#define DSPFW_HPLL_SR_EN (1<<31)
#define DSPFW_CURSOR_SR_SHIFT 24
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index f275677..15fbc1b 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -33,6 +33,8 @@
#define SLAVE_ADDR1 0x70
#define SLAVE_ADDR2 0x72
+static int panel_type;
+
static void *
find_section(struct bdb_header *bdb, int section_id)
{
@@ -128,6 +130,7 @@
dev_priv->lvds_dither = lvds_options->pixel_dither;
if (lvds_options->panel_type == 0xff)
return;
+ panel_type = lvds_options->panel_type;
lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
if (!lvds_lfp_data)
@@ -197,7 +200,8 @@
memset(temp_mode, 0, sizeof(*temp_mode));
}
kfree(temp_mode);
- if (temp_downclock < panel_fixed_mode->clock) {
+ if (temp_downclock < panel_fixed_mode->clock &&
+ i915_lvds_downclock) {
dev_priv->lvds_downclock_avail = 1;
dev_priv->lvds_downclock = temp_downclock;
DRM_DEBUG_KMS("LVDS downclock is found in VBT. ",
@@ -405,6 +409,34 @@
}
static void
+parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
+{
+ struct bdb_edp *edp;
+
+ edp = find_section(bdb, BDB_EDP);
+ if (!edp) {
+ if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp_support) {
+ DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported,\
+ assume 18bpp panel color depth.\n");
+ dev_priv->edp_bpp = 18;
+ }
+ return;
+ }
+
+ switch ((edp->color_depth >> (panel_type * 2)) & 3) {
+ case EDP_18BPP:
+ dev_priv->edp_bpp = 18;
+ break;
+ case EDP_24BPP:
+ dev_priv->edp_bpp = 24;
+ break;
+ case EDP_30BPP:
+ dev_priv->edp_bpp = 30;
+ break;
+ }
+}
+
+static void
parse_device_mapping(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
{
@@ -521,6 +553,7 @@
parse_sdvo_device_mapping(dev_priv, bdb);
parse_device_mapping(dev_priv, bdb);
parse_driver_features(dev_priv, bdb);
+ parse_edp(dev_priv, bdb);
pci_unmap_rom(pdev, bios);
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 425ac9d..4c18514 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -98,6 +98,7 @@
#define BDB_SDVO_LVDS_PNP_IDS 24
#define BDB_SDVO_LVDS_POWER_SEQ 25
#define BDB_TV_OPTIONS 26
+#define BDB_EDP 27
#define BDB_LVDS_OPTIONS 40
#define BDB_LVDS_LFP_DATA_PTRS 41
#define BDB_LVDS_LFP_DATA 42
@@ -426,6 +427,45 @@
u8 custom_vbt_version;
} __attribute__((packed));
+#define EDP_18BPP 0
+#define EDP_24BPP 1
+#define EDP_30BPP 2
+#define EDP_RATE_1_62 0
+#define EDP_RATE_2_7 1
+#define EDP_LANE_1 0
+#define EDP_LANE_2 1
+#define EDP_LANE_4 3
+#define EDP_PREEMPHASIS_NONE 0
+#define EDP_PREEMPHASIS_3_5dB 1
+#define EDP_PREEMPHASIS_6dB 2
+#define EDP_PREEMPHASIS_9_5dB 3
+#define EDP_VSWING_0_4V 0
+#define EDP_VSWING_0_6V 1
+#define EDP_VSWING_0_8V 2
+#define EDP_VSWING_1_2V 3
+
+struct edp_power_seq {
+ u16 t3;
+ u16 t7;
+ u16 t9;
+ u16 t10;
+ u16 t12;
+} __attribute__ ((packed));
+
+struct edp_link_params {
+ u8 rate:4;
+ u8 lanes:4;
+ u8 preemphasis:4;
+ u8 vswing:4;
+} __attribute__ ((packed));
+
+struct bdb_edp {
+ struct edp_power_seq power_seqs[16];
+ u32 color_depth;
+ u32 sdrrs_msa_timing_delay;
+ struct edp_link_params link_params[16];
+} __attribute__ ((packed));
+
bool intel_init_bios(struct drm_device *dev);
/*
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 002612f..45da78e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -70,8 +70,6 @@
intel_p2_t p2;
bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
int, int, intel_clock_t *);
- bool (* find_reduced_pll)(const intel_limit_t *, struct drm_crtc *,
- int, int, intel_clock_t *);
};
#define I8XX_DOT_MIN 25000
@@ -243,11 +241,11 @@
#define IRONLAKE_VCO_MIN 1760000
#define IRONLAKE_VCO_MAX 3510000
#define IRONLAKE_N_MIN 1
-#define IRONLAKE_N_MAX 5
+#define IRONLAKE_N_MAX 6
#define IRONLAKE_M_MIN 79
-#define IRONLAKE_M_MAX 118
+#define IRONLAKE_M_MAX 127
#define IRONLAKE_M1_MIN 12
-#define IRONLAKE_M1_MAX 23
+#define IRONLAKE_M1_MAX 22
#define IRONLAKE_M2_MIN 5
#define IRONLAKE_M2_MAX 9
#define IRONLAKE_P_SDVO_DAC_MIN 5
@@ -274,9 +272,6 @@
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
static bool
-intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock);
-static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
@@ -299,7 +294,6 @@
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_i8xx_lvds = {
@@ -314,7 +308,6 @@
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_i9xx_sdvo = {
@@ -329,7 +322,6 @@
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_i9xx_lvds = {
@@ -347,7 +339,6 @@
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
/* below parameter and function is for G4X Chipset Family*/
@@ -365,7 +356,6 @@
.p2_fast = G4X_P2_SDVO_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_hdmi = {
@@ -382,7 +372,6 @@
.p2_fast = G4X_P2_HDMI_DAC_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
@@ -407,7 +396,6 @@
.p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
@@ -432,7 +420,6 @@
.p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- .find_reduced_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_g4x_display_port = {
@@ -470,7 +457,6 @@
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_pineview_lvds = {
@@ -486,7 +472,6 @@
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
.find_pll = intel_find_best_PLL,
- .find_reduced_pll = intel_find_best_reduced_PLL,
};
static const intel_limit_t intel_limits_ironlake_sdvo = {
@@ -768,46 +753,6 @@
return (err != target);
}
-
-static bool
-intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock)
-
-{
- struct drm_device *dev = crtc->dev;
- intel_clock_t clock;
- int err = target;
- bool found = false;
-
- memcpy(&clock, best_clock, sizeof(intel_clock_t));
-
- for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
- for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) {
- /* m1 is always 0 in Pineview */
- if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
- break;
- for (clock.n = limit->n.min; clock.n <= limit->n.max;
- clock.n++) {
- int this_err;
-
- intel_clock(dev, refclk, &clock);
-
- if (!intel_PLL_is_valid(crtc, &clock))
- continue;
-
- this_err = abs(clock.dot - target);
- if (this_err < err) {
- *best_clock = clock;
- err = this_err;
- found = true;
- }
- }
- }
- }
-
- return found;
-}
-
static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock)
@@ -1262,7 +1207,7 @@
return ret;
}
- ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+ ret = i915_gem_object_set_to_display_plane(obj);
if (ret != 0) {
i915_gem_object_unpin(obj);
mutex_unlock(&dev->struct_mutex);
@@ -2910,10 +2855,8 @@
return -EINVAL;
}
- if (is_lvds && limit->find_reduced_pll &&
- dev_priv->lvds_downclock_avail) {
- memcpy(&reduced_clock, &clock, sizeof(intel_clock_t));
- has_reduced_clock = limit->find_reduced_pll(limit, crtc,
+ if (is_lvds && dev_priv->lvds_downclock_avail) {
+ has_reduced_clock = limit->find_pll(limit, crtc,
dev_priv->lvds_downclock,
refclk,
&reduced_clock);
@@ -2981,6 +2924,21 @@
temp |= PIPE_8BPC;
else
temp |= PIPE_6BPC;
+ } else if (is_edp) {
+ switch (dev_priv->edp_bpp/3) {
+ case 8:
+ temp |= PIPE_8BPC;
+ break;
+ case 10:
+ temp |= PIPE_10BPC;
+ break;
+ case 6:
+ temp |= PIPE_6BPC;
+ break;
+ case 12:
+ temp |= PIPE_12BPC;
+ break;
+ }
} else
temp |= PIPE_8BPC;
I915_WRITE(pipeconf_reg, temp);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1349d9f..439506c 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -125,9 +125,15 @@
/* I think this is a fiction */
static int
-intel_dp_link_required(int pixel_clock)
+intel_dp_link_required(struct drm_device *dev,
+ struct intel_output *intel_output, int pixel_clock)
{
- return pixel_clock * 3;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (IS_eDP(intel_output))
+ return (pixel_clock * dev_priv->edp_bpp) / 8;
+ else
+ return pixel_clock * 3;
}
static int
@@ -138,7 +144,8 @@
int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
int max_lanes = intel_dp_max_lane_count(intel_output);
- if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+ if (intel_dp_link_required(connector->dev, intel_output, mode->clock)
+ > max_link_clock * max_lanes)
return MODE_CLOCK_HIGH;
if (mode->clock < 10000)
@@ -492,7 +499,8 @@
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
- if (intel_dp_link_required(mode->clock) <= link_avail) {
+ if (intel_dp_link_required(encoder->dev, intel_output, mode->clock)
+ <= link_avail) {
dp_priv->link_bw = bws[clock];
dp_priv->lane_count = lane_count;
adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
@@ -1289,53 +1297,7 @@
if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
intel_dp_check_link_status(intel_output);
}
-/*
- * Enumerate the child dev array parsed from VBT to check whether
- * the given DP is present.
- * If it is present, return 1.
- * If it is not present, return false.
- * If no child dev is parsed from VBT, it is assumed that the given
- * DP is present.
- */
-static int dp_is_present_in_vbt(struct drm_device *dev, int dp_reg)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct child_device_config *p_child;
- int i, dp_port, ret;
- if (!dev_priv->child_dev_num)
- return 1;
-
- dp_port = 0;
- if (dp_reg == DP_B || dp_reg == PCH_DP_B)
- dp_port = PORT_IDPB;
- else if (dp_reg == DP_C || dp_reg == PCH_DP_C)
- dp_port = PORT_IDPC;
- else if (dp_reg == DP_D || dp_reg == PCH_DP_D)
- dp_port = PORT_IDPD;
-
- ret = 0;
- for (i = 0; i < dev_priv->child_dev_num; i++) {
- p_child = dev_priv->child_dev + i;
- /*
- * If the device type is not DP, continue.
- */
- if (p_child->device_type != DEVICE_TYPE_DP &&
- p_child->device_type != DEVICE_TYPE_eDP)
- continue;
- /* Find the eDP port */
- if (dp_reg == DP_A && p_child->device_type == DEVICE_TYPE_eDP) {
- ret = 1;
- break;
- }
- /* Find the DP port */
- if (p_child->dvo_port == dp_port) {
- ret = 1;
- break;
- }
- }
- return ret;
-}
void
intel_dp_init(struct drm_device *dev, int output_reg)
{
@@ -1345,10 +1307,6 @@
struct intel_dp_priv *dp_priv;
const char *name = NULL;
- if (!dp_is_present_in_vbt(dev, output_reg)) {
- DRM_DEBUG_KMS("DP is not present. Ignore it\n");
- return;
- }
intel_output = kcalloc(sizeof(struct intel_output) +
sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
if (!intel_output)
@@ -1373,11 +1331,10 @@
else if (output_reg == DP_D || output_reg == PCH_DP_D)
intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
- if (IS_eDP(intel_output)) {
- intel_output->crtc_mask = (1 << 1);
+ if (IS_eDP(intel_output))
intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
- } else
- intel_output->crtc_mask = (1 << 0) | (1 << 1);
+
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 0643194..0e268de 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -225,52 +225,6 @@
.destroy = intel_hdmi_enc_destroy,
};
-/*
- * Enumerate the child dev array parsed from VBT to check whether
- * the given HDMI is present.
- * If it is present, return 1.
- * If it is not present, return false.
- * If no child dev is parsed from VBT, it assumes that the given
- * HDMI is present.
- */
-static int hdmi_is_present_in_vbt(struct drm_device *dev, int hdmi_reg)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct child_device_config *p_child;
- int i, hdmi_port, ret;
-
- if (!dev_priv->child_dev_num)
- return 1;
-
- if (hdmi_reg == SDVOB)
- hdmi_port = DVO_B;
- else if (hdmi_reg == SDVOC)
- hdmi_port = DVO_C;
- else if (hdmi_reg == HDMIB)
- hdmi_port = DVO_B;
- else if (hdmi_reg == HDMIC)
- hdmi_port = DVO_C;
- else if (hdmi_reg == HDMID)
- hdmi_port = DVO_D;
- else
- return 0;
-
- ret = 0;
- for (i = 0; i < dev_priv->child_dev_num; i++) {
- p_child = dev_priv->child_dev + i;
- /*
- * If the device type is not HDMI, continue.
- */
- if (p_child->device_type != DEVICE_TYPE_HDMI)
- continue;
- /* Find the HDMI port */
- if (p_child->dvo_port == hdmi_port) {
- ret = 1;
- break;
- }
- }
- return ret;
-}
void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -278,10 +232,6 @@
struct intel_output *intel_output;
struct intel_hdmi_priv *hdmi_priv;
- if (!hdmi_is_present_in_vbt(dev, sdvox_reg)) {
- DRM_DEBUG_KMS("HDMI is not present. Ignored it \n");
- return;
- }
intel_output = kcalloc(sizeof(struct intel_output) +
sizeof(struct intel_hdmi_priv), 1, GFP_KERNEL);
if (!intel_output)
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f4b4aa2..aa74e59 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -602,6 +602,20 @@
/* Some lid devices report incorrect lid status, assume they're connected */
static const struct dmi_system_id bad_lid_status[] = {
{
+ .ident = "Compaq nx9020",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_BOARD_NAME, "3084"),
+ },
+ },
+ {
+ .ident = "Samsung SX20S",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BOARD_NAME, "SX20S"),
+ },
+ },
+ {
.ident = "Aspire One",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -912,7 +926,8 @@
}
}
mutex_unlock(&dev->mode_config.mutex);
- if (temp_downclock < panel_fixed_mode->clock) {
+ if (temp_downclock < panel_fixed_mode->clock &&
+ i915_lvds_downclock) {
/* We found the downclock for LVDS. */
dev_priv->lvds_downclock_avail = 1;
dev_priv->lvds_downclock = temp_downclock;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index de5144c..eaacfd0 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -462,14 +462,63 @@
}
/**
- * Don't check status code from this as it switches the bus back to the
- * SDVO chips which defeats the purpose of doing a bus switch in the first
- * place.
+ * Try to read the response after issuie the DDC switch command. But it
+ * is noted that we must do the action of reading response and issuing DDC
+ * switch command in one I2C transaction. Otherwise when we try to start
+ * another I2C transaction after issuing the DDC bus switch, it will be
+ * switched to the internal SDVO register.
*/
static void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output,
u8 target)
{
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ u8 out_buf[2], cmd_buf[2], ret_value[2], ret;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = sdvo_priv->slave_addr >> 1,
+ .flags = 0,
+ .len = 2,
+ .buf = out_buf,
+ },
+ /* the following two are to read the response */
+ {
+ .addr = sdvo_priv->slave_addr >> 1,
+ .flags = 0,
+ .len = 1,
+ .buf = cmd_buf,
+ },
+ {
+ .addr = sdvo_priv->slave_addr >> 1,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = ret_value,
+ },
+ };
+
+ intel_sdvo_debug_write(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH,
+ &target, 1);
+ /* write the DDC switch command argument */
+ intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0, target);
+
+ out_buf[0] = SDVO_I2C_OPCODE;
+ out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH;
+ cmd_buf[0] = SDVO_I2C_CMD_STATUS;
+ cmd_buf[1] = 0;
+ ret_value[0] = 0;
+ ret_value[1] = 0;
+
+ ret = i2c_transfer(intel_output->i2c_bus, msgs, 3);
+ if (ret != 3) {
+ /* failure in I2C transfer */
+ DRM_DEBUG_KMS("I2c transfer returned %d\n", ret);
+ return;
+ }
+ if (ret_value[0] != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("DDC switch command returns response %d\n",
+ ret_value[0]);
+ return;
+ }
+ return;
}
static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1)
@@ -1579,6 +1628,32 @@
edid = drm_get_edid(&intel_output->base,
intel_output->ddc_bus);
+ /* This is only applied to SDVO cards with multiple outputs */
+ if (edid == NULL && intel_sdvo_multifunc_encoder(intel_output)) {
+ uint8_t saved_ddc, temp_ddc;
+ saved_ddc = sdvo_priv->ddc_bus;
+ temp_ddc = sdvo_priv->ddc_bus >> 1;
+ /*
+ * Don't use the 1 as the argument of DDC bus switch to get
+ * the EDID. It is used for SDVO SPD ROM.
+ */
+ while(temp_ddc > 1) {
+ sdvo_priv->ddc_bus = temp_ddc;
+ edid = drm_get_edid(&intel_output->base,
+ intel_output->ddc_bus);
+ if (edid) {
+ /*
+ * When we can get the EDID, maybe it is the
+ * correct DDC bus. Update it.
+ */
+ sdvo_priv->ddc_bus = temp_ddc;
+ break;
+ }
+ temp_ddc >>= 1;
+ }
+ if (edid == NULL)
+ sdvo_priv->ddc_bus = saved_ddc;
+ }
/* when there is no edid and no monitor is connected with VGA
* port, try to use the CRT ddc to read the EDID for DVI-connector
*/
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 1d5b9b7..552ec11 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1840,8 +1840,6 @@
drm_connector_attach_property(connector,
dev->mode_config.tv_bottom_margin_property,
tv_priv->margin[TV_MARGIN_BOTTOM]);
-
- dev_priv->hotplug_supported_mask |= TV_HOTPLUG_INT_STATUS;
out:
drm_sysfs_connector_add(connector);
}
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index c065199..f5ff349 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2729,7 +2729,7 @@
}
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
break;
@@ -2749,7 +2749,7 @@
}
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
break;
@@ -2798,7 +2798,7 @@
}
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
break;
@@ -2812,7 +2812,7 @@
DRM_DEBUG("IH: CP EOP\n");
break;
default:
- DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+ DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
break;
}
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 7914455..579c892 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -687,6 +687,9 @@
uint16_t tv_info;
enum radeon_tv_std tv_std = TV_STD_NTSC;
+ if (rdev->bios == NULL)
+ return tv_std;
+
tv_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
if (tv_info) {
if (RBIOS8(tv_info + 6) == 'T') {
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 9da10dd..5526641 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -900,10 +900,18 @@
static int radeon_dvi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
/* XXX check mode bandwidth */
+ /* clocks over 135 MHz have heat issues with DVI on RV100 */
+ if (radeon_connector->use_digital &&
+ (rdev->family == CHIP_RV100) &&
+ (mode->clock > 135000))
+ return MODE_CLOCK_HIGH;
+
if (radeon_connector->use_digital && (mode->clock > 165000)) {
if ((radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I) ||
(radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) ||
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 981508f..38e45e2 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -46,6 +46,7 @@
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
uint32_t lvds_gen_cntl, lvds_pll_cntl, pixclks_cntl, disp_pwr_man;
int panel_pwr_delay = 2000;
+ bool is_mac = false;
DRM_DEBUG("\n");
if (radeon_encoder->enc_priv) {
@@ -58,6 +59,15 @@
}
}
+ /* macs (and possibly some x86 oem systems?) wire up LVDS strangely
+ * Taken from radeonfb.
+ */
+ if ((rdev->mode_info.connector_table == CT_IBOOK) ||
+ (rdev->mode_info.connector_table == CT_POWERBOOK_EXTERNAL) ||
+ (rdev->mode_info.connector_table == CT_POWERBOOK_INTERNAL) ||
+ (rdev->mode_info.connector_table == CT_POWERBOOK_VGA))
+ is_mac = true;
+
switch (mode) {
case DRM_MODE_DPMS_ON:
disp_pwr_man = RREG32(RADEON_DISP_PWR_MAN);
@@ -74,6 +84,8 @@
lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
lvds_gen_cntl |= (RADEON_LVDS_ON | RADEON_LVDS_EN | RADEON_LVDS_DIGON | RADEON_LVDS_BLON);
+ if (is_mac)
+ lvds_gen_cntl |= RADEON_LVDS_BL_MOD_EN;
lvds_gen_cntl &= ~(RADEON_LVDS_DISPLAY_DIS);
udelay(panel_pwr_delay * 1000);
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
@@ -85,7 +97,14 @@
WREG32_PLL_P(RADEON_PIXCLKS_CNTL, 0, ~RADEON_PIXCLK_LVDS_ALWAYS_ONb);
lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
lvds_gen_cntl |= RADEON_LVDS_DISPLAY_DIS;
- lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON);
+ if (is_mac) {
+ lvds_gen_cntl &= ~RADEON_LVDS_BL_MOD_EN;
+ WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+ lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_EN);
+ } else {
+ WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+ lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON);
+ }
udelay(panel_pwr_delay * 1000);
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 3b0c07b..58b5adf 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -215,7 +215,10 @@
rbo = container_of(bo, struct radeon_bo, tbo);
switch (bo->mem.mem_type) {
case TTM_PL_VRAM:
- radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT);
+ if (rbo->rdev->cp.ready == false)
+ radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_CPU);
+ else
+ radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT);
break;
case TTM_PL_TT:
default:
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 4b96e7a..5b4d66d 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -431,6 +431,13 @@
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
+ APPLE_ISO_KEYBOARD },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 80792d3..eabe5f8 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1285,6 +1285,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
@@ -1553,6 +1556,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 3839340e..010368e 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -88,6 +88,9 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
@@ -166,6 +169,9 @@
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
+#define USB_VENDOR_ID_ETT 0x0664
+#define USB_DEVICE_ID_TC5UH 0x0309
+
#define USB_VENDOR_ID_EZKEY 0x0518
#define USB_DEVICE_ID_BTC_8193 0x0002
diff --git a/drivers/hid/hid-samsung.c b/drivers/hid/hid-samsung.c
index 5b222ee..510dd13 100644
--- a/drivers/hid/hid-samsung.c
+++ b/drivers/hid/hid-samsung.c
@@ -39,7 +39,17 @@
*
* 3. 135 byte report descriptor
* Report #4 has an array field with logical range 0..17 instead of 1..14.
+ *
+ * 4. 171 byte report descriptor
+ * Report #3 has an array field with logical range 0..1 instead of 1..3.
*/
+static inline void samsung_dev_trace(struct hid_device *hdev,
+ unsigned int rsize)
+{
+ dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
+ "descriptor\n", rsize);
+}
+
static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int rsize)
{
@@ -47,8 +57,7 @@
rdesc[177] == 0x75 && rdesc[178] == 0x30 &&
rdesc[179] == 0x95 && rdesc[180] == 0x01 &&
rdesc[182] == 0x40) {
- dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
- "descriptor\n", 184);
+ samsung_dev_trace(hdev, 184);
rdesc[176] = 0xff;
rdesc[178] = 0x08;
rdesc[180] = 0x06;
@@ -56,17 +65,21 @@
} else
if (rsize == 203 && rdesc[192] == 0x15 && rdesc[193] == 0x0 &&
rdesc[194] == 0x25 && rdesc[195] == 0x12) {
- dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
- "descriptor\n", 203);
+ samsung_dev_trace(hdev, 203);
rdesc[193] = 0x1;
rdesc[195] = 0xf;
} else
if (rsize == 135 && rdesc[124] == 0x15 && rdesc[125] == 0x0 &&
rdesc[126] == 0x25 && rdesc[127] == 0x11) {
- dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
- "descriptor\n", 135);
+ samsung_dev_trace(hdev, 135);
rdesc[125] = 0x1;
rdesc[127] = 0xe;
+ } else
+ if (rsize == 171 && rdesc[160] == 0x15 && rdesc[161] == 0x0 &&
+ rdesc[162] == 0x25 && rdesc[163] == 0x01) {
+ samsung_dev_trace(hdev, 171);
+ rdesc[161] = 0x1;
+ rdesc[163] = 0x3;
}
}
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index 7475421..12dcda5 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -142,6 +142,7 @@
wdata->butstate = rw;
input_report_key(input, BTN_0, rw & 0x02);
input_report_key(input, BTN_1, rw & 0x01);
+ input_report_key(input, BTN_TOOL_FINGER, 0xf0);
input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
input_sync(input);
}
@@ -196,6 +197,9 @@
/* Pad */
input->evbit[0] |= BIT(EV_MSC);
input->mscbit[0] |= BIT(MSC_SERIAL);
+ set_bit(BTN_0, input->keybit);
+ set_bit(BTN_1, input->keybit);
+ set_bit(BTN_TOOL_FINGER, input->keybit);
/* Distance, rubber and mouse */
input->absbit[0] |= BIT(ABS_DISTANCE);
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index f70f465..4687af4 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -87,9 +87,9 @@
outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
timeout = ALI1563_MAX_TIMEOUT;
- do
+ do {
msleep(1);
- while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
+ } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
@@ -157,9 +157,9 @@
outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
timeout = ALI1563_MAX_TIMEOUT;
- do
+ do {
msleep(1);
- while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
+ } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 0ed68e2..f7346a9 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -75,7 +75,7 @@
unsigned long timeout;
if (irq > -1) {
- ret = wait_event_interruptible_timeout(pca_wait,
+ ret = wait_event_timeout(pca_wait,
pca_isa_readbyte(pd, I2C_PCA_CON)
& I2C_PCA_CON_SI, pca_isa_ops.timeout);
} else {
@@ -96,7 +96,7 @@
}
static irqreturn_t pca_handler(int this_irq, void *dev_id) {
- wake_up_interruptible(&pca_wait);
+ wake_up(&pca_wait);
return IRQ_HANDLED;
}
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index c4df9d4..5b2213d 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -84,7 +84,7 @@
unsigned long timeout;
if (i2c->irq) {
- ret = wait_event_interruptible_timeout(i2c->wait,
+ ret = wait_event_timeout(i2c->wait,
i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
& I2C_PCA_CON_SI, i2c->adap.timeout);
} else {
@@ -122,7 +122,7 @@
if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
return IRQ_NONE;
- wake_up_interruptible(&i2c->wait);
+ wake_up(&i2c->wait);
return IRQ_HANDLED;
}
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 1e245e9..e56e4b6 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -324,12 +324,12 @@
else
msleep(1);
- while ((timeout++ < MAX_TIMEOUT) &&
+ while ((++timeout < MAX_TIMEOUT) &&
((temp = inb_p(SMBHSTSTS)) & 0x01))
msleep(1);
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout == MAX_TIMEOUT) {
dev_err(&piix4_adapter.dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index e4b1543..a84a909 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -165,10 +165,10 @@
do {
msleep(1);
temp = inb_p(SMBHSTSTS);
- } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+ } while ((temp & 0x01) && (++timeout < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout == MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0ac2f90..10be7b5 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -248,7 +248,7 @@
NULL
};
-const static struct dev_pm_ops i2c_device_pm_ops = {
+static const struct dev_pm_ops i2c_device_pm_ops = {
.suspend = i2c_device_pm_suspend,
.resume = i2c_device_pm_resume,
};
@@ -843,6 +843,9 @@
adap->dev.parent);
#endif
+ /* device name is gone after device_unregister */
+ dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
+
/* clean up the sysfs representation */
init_completion(&adap->dev_released);
device_unregister(&adap->dev);
@@ -855,8 +858,6 @@
idr_remove(&i2c_adapter_idr, adap->nr);
mutex_unlock(&core_lock);
- dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
-
/* Clear the device structure in case this adapter is ever going to be
added again */
memset(&adap->dev, 0, sizeof(adap->dev));
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index dee6706..258c639 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -59,7 +59,8 @@
client->head &= EVDEV_BUFFER_SIZE - 1;
spin_unlock(&client->buffer_lock);
- kill_fasync(&client->fasync, SIGIO, POLL_IN);
+ if (event->type == EV_SYN)
+ kill_fasync(&client->fasync, SIGIO, POLL_IN);
}
/*
diff --git a/drivers/input/input.c b/drivers/input/input.c
index ab060710..30b503b 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -24,6 +24,7 @@
#include <linux/mutex.h>
#include <linux/rcupdate.h>
#include <linux/smp_lock.h>
+#include "input-compat.h"
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("Input core");
@@ -764,6 +765,40 @@
return error;
}
+#ifdef CONFIG_COMPAT
+
+static int input_bits_to_string(char *buf, int buf_size,
+ unsigned long bits, bool skip_empty)
+{
+ int len = 0;
+
+ if (INPUT_COMPAT_TEST) {
+ u32 dword = bits >> 32;
+ if (dword || !skip_empty)
+ len += snprintf(buf, buf_size, "%x ", dword);
+
+ dword = bits & 0xffffffffUL;
+ if (dword || !skip_empty || len)
+ len += snprintf(buf + len, max(buf_size - len, 0),
+ "%x", dword);
+ } else {
+ if (bits || !skip_empty)
+ len += snprintf(buf, buf_size, "%lx", bits);
+ }
+
+ return len;
+}
+
+#else /* !CONFIG_COMPAT */
+
+static int input_bits_to_string(char *buf, int buf_size,
+ unsigned long bits, bool skip_empty)
+{
+ return bits || !skip_empty ?
+ snprintf(buf, buf_size, "%lx", bits) : 0;
+}
+
+#endif
#ifdef CONFIG_PROC_FS
@@ -832,14 +867,25 @@
unsigned long *bitmap, int max)
{
int i;
-
- for (i = BITS_TO_LONGS(max) - 1; i > 0; i--)
- if (bitmap[i])
- break;
+ bool skip_empty = true;
+ char buf[18];
seq_printf(seq, "B: %s=", name);
- for (; i >= 0; i--)
- seq_printf(seq, "%lx%s", bitmap[i], i > 0 ? " " : "");
+
+ for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) {
+ if (input_bits_to_string(buf, sizeof(buf),
+ bitmap[i], skip_empty)) {
+ skip_empty = false;
+ seq_printf(seq, "%s%s", buf, i > 0 ? " " : "");
+ }
+ }
+
+ /*
+ * If no output was produced print a single 0.
+ */
+ if (skip_empty)
+ seq_puts(seq, "0");
+
seq_putc(seq, '\n');
}
@@ -1128,14 +1174,23 @@
{
int i;
int len = 0;
+ bool skip_empty = true;
- for (i = BITS_TO_LONGS(max) - 1; i > 0; i--)
- if (bitmap[i])
- break;
+ for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) {
+ len += input_bits_to_string(buf + len, max(buf_size - len, 0),
+ bitmap[i], skip_empty);
+ if (len) {
+ skip_empty = false;
+ if (i > 0)
+ len += snprintf(buf + len, max(buf_size - len, 0), " ");
+ }
+ }
- for (; i >= 0; i--)
- len += snprintf(buf + len, max(buf_size - len, 0),
- "%lx%s", bitmap[i], i > 0 ? " " : "");
+ /*
+ * If no output was produced print a single 0.
+ */
+ if (len == 0)
+ len = snprintf(buf, buf_size, "%d", 0);
if (add_cr)
len += snprintf(buf + len, max(buf_size - len, 0), "\n");
@@ -1150,7 +1205,8 @@
{ \
struct input_dev *input_dev = to_input_dev(dev); \
int len = input_print_bitmap(buf, PAGE_SIZE, \
- input_dev->bm##bit, ev##_MAX, 1); \
+ input_dev->bm##bit, ev##_MAX, \
+ true); \
return min_t(int, len, PAGE_SIZE); \
} \
static DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL)
@@ -1214,7 +1270,7 @@
len = input_print_bitmap(&env->buf[env->buflen - 1],
sizeof(env->buf) - env->buflen,
- bitmap, max, 0);
+ bitmap, max, false);
if (len >= (sizeof(env->buf) - env->buflen))
return -ENOMEM;
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index 67c207f..45ac70e 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -277,7 +277,7 @@
}
#ifdef RESET_WORKS
- if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) ||
+ if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) &&
(gf2k->id != (GB(31,2,0) | GB(27,3,2) | GB(24,3,5)))) {
err = -ENODEV;
goto fail2;
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 482cb12..8a28fb7 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -446,7 +446,7 @@
}
exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
__func__, retval);
@@ -571,7 +571,7 @@
xpad->odata[6] = 0x00;
xpad->odata[7] = 0x00;
xpad->irq_out->transfer_buffer_length = 8;
- usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+ usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
}
return 0;
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 1f5e2ce..7b40562 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -225,8 +225,10 @@
struct delayed_work event_work;
unsigned long event_jiffies;
- struct mutex event_mutex;
unsigned long event_mask;
+
+ /* Serializes reconnect(), attr->set() and event work */
+ struct mutex mutex;
};
/*
@@ -577,7 +579,7 @@
{
struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work);
- mutex_lock(&atkbd->event_mutex);
+ mutex_lock(&atkbd->mutex);
if (!atkbd->enabled) {
/*
@@ -596,7 +598,7 @@
atkbd_set_repeat_rate(atkbd);
}
- mutex_unlock(&atkbd->event_mutex);
+ mutex_unlock(&atkbd->mutex);
}
/*
@@ -612,7 +614,7 @@
atkbd->event_jiffies = jiffies;
set_bit(event_bit, &atkbd->event_mask);
- wmb();
+ mb();
schedule_delayed_work(&atkbd->event_work, delay);
}
@@ -849,13 +851,20 @@
{
struct atkbd *atkbd = serio_get_drvdata(serio);
+ sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
+
atkbd_disable(atkbd);
- /* make sure we don't have a command in flight */
+ input_unregister_device(atkbd->dev);
+
+ /*
+ * Make sure we don't have a command in flight.
+ * Note that since atkbd->enabled is false event work will keep
+ * rescheduling itself until it gets canceled and will not try
+ * accessing freed input device or serio port.
+ */
cancel_delayed_work_sync(&atkbd->event_work);
- sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
- input_unregister_device(atkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(atkbd);
@@ -1087,7 +1096,7 @@
atkbd->dev = dev;
ps2_init(&atkbd->ps2dev, serio);
INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
- mutex_init(&atkbd->event_mutex);
+ mutex_init(&atkbd->mutex);
switch (serio->id.type) {
@@ -1160,19 +1169,23 @@
{
struct atkbd *atkbd = serio_get_drvdata(serio);
struct serio_driver *drv = serio->drv;
+ int retval = -1;
if (!atkbd || !drv) {
printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
return -1;
}
+ mutex_lock(&atkbd->mutex);
+
atkbd_disable(atkbd);
if (atkbd->write) {
if (atkbd_probe(atkbd))
- return -1;
+ goto out;
+
if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
- return -1;
+ goto out;
atkbd_activate(atkbd);
@@ -1190,8 +1203,11 @@
}
atkbd_enable(atkbd);
+ retval = 0;
- return 0;
+ out:
+ mutex_unlock(&atkbd->mutex);
+ return retval;
}
static struct serio_device_id atkbd_serio_ids[] = {
@@ -1235,47 +1251,28 @@
ssize_t (*handler)(struct atkbd *, char *))
{
struct serio *serio = to_serio_port(dev);
- int retval;
+ struct atkbd *atkbd = serio_get_drvdata(serio);
- retval = serio_pin_driver(serio);
- if (retval)
- return retval;
-
- if (serio->drv != &atkbd_drv) {
- retval = -ENODEV;
- goto out;
- }
-
- retval = handler((struct atkbd *)serio_get_drvdata(serio), buf);
-
-out:
- serio_unpin_driver(serio);
- return retval;
+ return handler(atkbd, buf);
}
static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
ssize_t (*handler)(struct atkbd *, const char *, size_t))
{
struct serio *serio = to_serio_port(dev);
- struct atkbd *atkbd;
+ struct atkbd *atkbd = serio_get_drvdata(serio);
int retval;
- retval = serio_pin_driver(serio);
+ retval = mutex_lock_interruptible(&atkbd->mutex);
if (retval)
return retval;
- if (serio->drv != &atkbd_drv) {
- retval = -ENODEV;
- goto out;
- }
-
- atkbd = serio_get_drvdata(serio);
atkbd_disable(atkbd);
retval = handler(atkbd, buf, count);
atkbd_enable(atkbd);
-out:
- serio_unpin_driver(serio);
+ mutex_unlock(&atkbd->mutex);
+
return retval;
}
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
index 6e52d85..d410d7a 100644
--- a/drivers/input/keyboard/davinci_keyscan.c
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -174,6 +174,14 @@
struct davinci_ks_platform_data *pdata = pdev->dev.platform_data;
int error, i;
+ if (pdata->device_enable) {
+ error = pdata->device_enable(dev);
+ if (error < 0) {
+ dev_dbg(dev, "device enable function failed\n");
+ return error;
+ }
+ }
+
if (!pdata->keymap) {
dev_dbg(dev, "no keymap from pdata\n");
return -EINVAL;
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 0d1d334..4f8fe08 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -139,6 +139,7 @@
/* trackpad finger data size, empirically at least ten fingers */
#define SIZEOF_FINGER sizeof(struct tp_finger)
#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER)
+#define MAX_FINGER_ORIENTATION 16384
/* device-specific parameters */
struct bcm5974_param {
@@ -284,6 +285,26 @@
input_set_abs_params(input_dev, ABS_Y,
0, cfg->y.dim, cfg->y.fuzz, 0);
+ /* finger touch area */
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ /* finger approach area */
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR,
+ cfg->w.devmin, cfg->w.devmax, 0, 0);
+ /* finger orientation */
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+ -MAX_FINGER_ORIENTATION,
+ MAX_FINGER_ORIENTATION, 0, 0);
+ /* finger position */
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ cfg->x.devmin, cfg->x.devmax, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ cfg->y.devmin, cfg->y.devmax, 0, 0);
+
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
@@ -310,13 +331,29 @@
return 0;
}
+static void report_finger_data(struct input_dev *input,
+ const struct bcm5974_config *cfg,
+ const struct tp_finger *f)
+{
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, raw2int(f->force_major));
+ input_report_abs(input, ABS_MT_TOUCH_MINOR, raw2int(f->force_minor));
+ input_report_abs(input, ABS_MT_WIDTH_MAJOR, raw2int(f->size_major));
+ input_report_abs(input, ABS_MT_WIDTH_MINOR, raw2int(f->size_minor));
+ input_report_abs(input, ABS_MT_ORIENTATION,
+ MAX_FINGER_ORIENTATION - raw2int(f->orientation));
+ input_report_abs(input, ABS_MT_POSITION_X, raw2int(f->abs_x));
+ input_report_abs(input, ABS_MT_POSITION_Y,
+ cfg->y.devmin + cfg->y.devmax - raw2int(f->abs_y));
+ input_mt_sync(input);
+}
+
/* report trackpad data as logical trackpad state */
static int report_tp_state(struct bcm5974 *dev, int size)
{
const struct bcm5974_config *c = &dev->cfg;
const struct tp_finger *f;
struct input_dev *input = dev->input;
- int raw_p, raw_w, raw_x, raw_y, raw_n;
+ int raw_p, raw_w, raw_x, raw_y, raw_n, i;
int ptest, origin, ibt = 0, nmin = 0, nmax = 0;
int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
@@ -329,6 +366,11 @@
/* always track the first finger; when detached, start over */
if (raw_n) {
+
+ /* report raw trackpad data */
+ for (i = 0; i < raw_n; i++)
+ report_finger_data(input, c, &f[i]);
+
raw_p = raw2int(f->force_major);
raw_w = raw2int(f->size_major);
raw_x = raw2int(f->abs_x);
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 401ac6b..9774bdf 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -627,8 +627,15 @@
synaptics_hardware = true;
if (max_proto > PSMOUSE_IMEX) {
- if (!set_properties || synaptics_init(psmouse) == 0)
+/*
+ * Try activating protocol, but check if support is enabled first, since
+ * we try detecting Synaptics even when protocol is disabled.
+ */
+ if (synaptics_supported() &&
+ (!set_properties || synaptics_init(psmouse) == 0)) {
return PSMOUSE_SYNAPTICS;
+ }
+
/*
* Some Synaptics touchpads can emulate extended protocols (like IMPS/2).
* Unfortunately Logitech/Genius probes confuse some firmware versions so
@@ -683,19 +690,6 @@
max_proto = PSMOUSE_IMEX;
}
-/*
- * Try Finger Sensing Pad
- */
- if (max_proto > PSMOUSE_IMEX) {
- if (fsp_detect(psmouse, set_properties) == 0) {
- if (!set_properties || fsp_init(psmouse) == 0)
- return PSMOUSE_FSP;
-/*
- * Init failed, try basic relative protocols
- */
- max_proto = PSMOUSE_IMEX;
- }
- }
if (max_proto > PSMOUSE_IMEX) {
if (genius_detect(psmouse, set_properties) == 0)
@@ -712,6 +706,21 @@
}
/*
+ * Try Finger Sensing Pad. We do it here because its probe upsets
+ * Trackpoint devices (causing TP_READ_ID command to time out).
+ */
+ if (max_proto > PSMOUSE_IMEX) {
+ if (fsp_detect(psmouse, set_properties) == 0) {
+ if (!set_properties || fsp_init(psmouse) == 0)
+ return PSMOUSE_FSP;
+/*
+ * Init failed, try basic relative protocols
+ */
+ max_proto = PSMOUSE_IMEX;
+ }
+ }
+
+/*
* Reset to defaults in case the device got confused by extended
* protocol probes. Note that we follow up with full reset because
* some mice put themselves to sleep when they see PSMOUSE_RESET_DIS.
@@ -1450,24 +1459,10 @@
struct serio *serio = to_serio_port(dev);
struct psmouse_attribute *attr = to_psmouse_attr(devattr);
struct psmouse *psmouse;
- int retval;
-
- retval = serio_pin_driver(serio);
- if (retval)
- return retval;
-
- if (serio->drv != &psmouse_drv) {
- retval = -ENODEV;
- goto out;
- }
psmouse = serio_get_drvdata(serio);
- retval = attr->show(psmouse, attr->data, buf);
-
-out:
- serio_unpin_driver(serio);
- return retval;
+ return attr->show(psmouse, attr->data, buf);
}
ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *devattr,
@@ -1478,18 +1473,9 @@
struct psmouse *psmouse, *parent = NULL;
int retval;
- retval = serio_pin_driver(serio);
- if (retval)
- return retval;
-
- if (serio->drv != &psmouse_drv) {
- retval = -ENODEV;
- goto out_unpin;
- }
-
retval = mutex_lock_interruptible(&psmouse_mutex);
if (retval)
- goto out_unpin;
+ goto out;
psmouse = serio_get_drvdata(serio);
@@ -1519,8 +1505,7 @@
out_unlock:
mutex_unlock(&psmouse_mutex);
- out_unpin:
- serio_unpin_driver(serio);
+ out:
return retval;
}
@@ -1582,9 +1567,7 @@
}
mutex_unlock(&psmouse_mutex);
- serio_unpin_driver(serio);
serio_unregister_child_port(serio);
- serio_pin_driver_uninterruptible(serio);
mutex_lock(&psmouse_mutex);
if (serio->drv != &psmouse_drv) {
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 77b9fd0..81a6b81 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -2,7 +2,7 @@
* Finger Sensing Pad PS/2 mouse driver.
*
* Copyright (C) 2005-2007 Asia Vital Components Co., Ltd.
- * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation.
+ * Copyright (C) 2005-2010 Tai-hwa Liang, Sentelic Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -658,9 +658,9 @@
if (packet[3] & BIT(1))
button_status |= 0x0f; /* wheel up */
if (packet[3] & BIT(2))
- button_status |= BIT(5);/* horizontal left */
+ button_status |= BIT(4);/* horizontal left */
if (packet[3] & BIT(3))
- button_status |= BIT(4);/* horizontal right */
+ button_status |= BIT(5);/* horizontal right */
/* push back to packet queue */
if (button_status != 0)
packet[3] = button_status;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 05689e7..d3f5243 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -743,6 +743,11 @@
return -1;
}
+bool synaptics_supported(void)
+{
+ return true;
+}
+
#else /* CONFIG_MOUSE_PS2_SYNAPTICS */
void __init synaptics_module_init(void)
@@ -754,5 +759,10 @@
return -ENOSYS;
}
+bool synaptics_supported(void)
+{
+ return false;
+}
+
#endif /* CONFIG_MOUSE_PS2_SYNAPTICS */
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 838e7f2..f0f40a3 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -109,5 +109,6 @@
int synaptics_detect(struct psmouse *psmouse, bool set_properties);
int synaptics_init(struct psmouse *psmouse);
void synaptics_reset(struct psmouse *psmouse);
+bool synaptics_supported(void);
#endif /* _SYNAPTICS_H */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 64b688d..2a5982e 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -524,6 +524,13 @@
*/
static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
{
+ /* Acer Aspire 5610 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
+ },
+ },
+ {
/* Acer Aspire 5630 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 96faa79..f96feeb 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -660,7 +660,7 @@
return 0;
}
-static struct of_device_id smu_platform_match[] =
+static const struct of_device_id smu_platform_match[] =
{
{
.type = "smu",
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index ea32c7e..454bc50 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -2211,7 +2211,7 @@
return 0;
}
-static struct of_device_id fcu_match[] =
+static const struct of_device_id fcu_match[] =
{
{
.type = "fcu",
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 3fbe41b..ba48fd7 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -457,7 +457,7 @@
return 0;
}
-static struct of_device_id therm_of_match[] = {{
+static const struct of_device_id therm_of_match[] = {{
.name = "fan",
.compatible = "adm1030"
}, {}
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index bff7a53..b521ed9 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -13,7 +13,7 @@
*/
-#include <linux/usb/input.h>
+#include <linux/input.h>
#include <media/ir-common.h>
#define IR_TAB_MIN_SIZE 32
diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c
index c190b0d..2833137 100644
--- a/drivers/media/common/tuners/tda8290.c
+++ b/drivers/media/common/tuners/tda8290.c
@@ -144,7 +144,8 @@
}
if (params->mode == V4L2_TUNER_RADIO) {
- priv->tda8290_easy_mode = 0x01; /* Start with MN values */
+ /* Set TDA8295 to FM radio; Start TDA8290 with MN values */
+ priv->tda8290_easy_mode = (priv->ver & TDA8295) ? 0x80 : 0x01;
tuner_dbg("setting to radio FM\n");
} else {
tuner_dbg("setting tda829x to system %s\n", mode);
@@ -672,16 +673,19 @@
static int tda8295_probe(struct tuner_i2c_props *i2c_props)
{
#define TDA8295_ID 0x8a
+#define TDA8295C2_ID 0x8b
unsigned char tda8295_id[] = { 0x2f, 0x00 };
/* detect tda8295 */
tuner_i2c_xfer_send(i2c_props, &tda8295_id[0], 1);
tuner_i2c_xfer_recv(i2c_props, &tda8295_id[1], 1);
- if (tda8295_id[1] == TDA8295_ID) {
+ if ((tda8295_id[1] & 0xfe) == TDA8295_ID) {
if (debug)
- printk(KERN_DEBUG "%s: tda8295 detected @ %d-%04x\n",
- __func__, i2c_adapter_id(i2c_props->adap),
+ printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n",
+ __func__, (tda8295_id[1] == TDA8295_ID) ?
+ "tda8295c1" : "tda8295c2",
+ i2c_adapter_id(i2c_props->adap),
i2c_props->addr);
return 0;
}
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 35d0817..cf8f65f 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -72,6 +72,10 @@
depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/pt1/Kconfig"
+comment "Supported Mantis Adapters"
+ depends on DVB_CORE && PCI && I2C
+ source "drivers/media/dvb/mantis/Kconfig"
+
comment "Supported DVB Frontends"
depends on DVB_CORE
source "drivers/media/dvb/frontends/Kconfig"
diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile
index 16d262d..c12922c 100644
--- a/drivers/media/dvb/Makefile
+++ b/drivers/media/dvb/Makefile
@@ -2,6 +2,18 @@
# Makefile for the kernel multimedia device drivers.
#
-obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/
+obj-y := dvb-core/ \
+ frontends/ \
+ ttpci/ \
+ ttusb-dec/ \
+ ttusb-budget/ \
+ b2c2/ \
+ bt8xx/ \
+ dvb-usb/ \
+ pluto2/ \
+ siano/ \
+ dm1105/ \
+ pt1/ \
+ mantis/
obj-$(CONFIG_DVB_FIREDTV) += firewire/
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index a3b8b697..cd7f9b7 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -208,6 +208,14 @@
help
A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+config DVB_MB86A16
+ tristate "Fujitsu MB86A16 based"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A DVB-S/DSS Direct Conversion reveiver.
+ Say Y when you want to support this frontend.
+
comment "DVB-T (terrestrial) frontends"
depends on DVB_CORE
@@ -587,6 +595,17 @@
help
A DMB-TH tuner module. Say Y when you want to support this frontend.
+config DVB_TDA665x
+ tristate "TDA665x tuner"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ Support for tuner modules based on Philips TDA6650/TDA6651 chips.
+ Say Y when you want to support this chip.
+
+ Currently supported tuners:
+ * Panasonic ENV57H12D5 (ET-50DT)
+
comment "Tools to develop new frontends"
config DVB_DUMMY_FE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 47575cc..874e8ad 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -64,6 +64,7 @@
obj-$(CONFIG_DVB_TUNER_CX24113) += cx24113.o
obj-$(CONFIG_DVB_S5H1411) += s5h1411.o
obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o
+obj-$(CONFIG_DVB_TDA665x) += tda665x.o
obj-$(CONFIG_DVB_LGS8GXX) += lgs8gxx.o
obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o
obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
@@ -80,3 +81,4 @@
obj-$(CONFIG_DVB_ISL6423) += isl6423.o
obj-$(CONFIG_DVB_EC100) += ec100.o
obj-$(CONFIG_DVB_DS3000) += ds3000.o
+obj-$(CONFIG_DVB_MB86A16) += mb86a16.o
diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h
index d99619a..b1ee207 100644
--- a/drivers/media/dvb/frontends/dib8000.h
+++ b/drivers/media/dvb/frontends/dib8000.h
@@ -100,7 +100,7 @@
static inline enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return CT_SHUTDOWN,
+ return CT_SHUTDOWN;
}
static inline void dib8000_pwm_agc_reset(struct dvb_frontend *fe)
{
diff --git a/drivers/media/dvb/frontends/lgdt3305.h b/drivers/media/dvb/frontends/lgdt3305.h
index 4fa6e52..9cb11c9 100644
--- a/drivers/media/dvb/frontends/lgdt3305.h
+++ b/drivers/media/dvb/frontends/lgdt3305.h
@@ -54,13 +54,13 @@
u16 usref_qam256; /* default: 0x2a80 */
/* disable i2c repeater - 0:repeater enabled 1:repeater disabled */
- int deny_i2c_rptr:1;
+ unsigned int deny_i2c_rptr:1;
/* spectral inversion - 0:disabled 1:enabled */
- int spectral_inversion:1;
+ unsigned int spectral_inversion:1;
/* use RF AGC loop - 0:disabled 1:enabled */
- int rf_agc_loop:1;
+ unsigned int rf_agc_loop:1;
enum lgdt3305_mpeg_mode mpeg_mode;
enum lgdt3305_tp_clock_edge tpclk_edge;
diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c
new file mode 100644
index 0000000..d05f750
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a16.c
@@ -0,0 +1,1878 @@
+/*
+ Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include "dvb_frontend.h"
+#include "mb86a16.h"
+#include "mb86a16_priv.h"
+
+unsigned int verbose = 5;
+module_param(verbose, int, 0644);
+
+#define ABS(x) ((x) < 0 ? (-x) : (x))
+
+struct mb86a16_state {
+ struct i2c_adapter *i2c_adap;
+ const struct mb86a16_config *config;
+ struct dvb_frontend frontend;
+
+ /* tuning parameters */
+ int frequency;
+ int srate;
+
+ /* Internal stuff */
+ int master_clk;
+ int deci;
+ int csel;
+ int rsel;
+};
+
+#define MB86A16_ERROR 0
+#define MB86A16_NOTICE 1
+#define MB86A16_INFO 2
+#define MB86A16_DEBUG 3
+
+#define dprintk(x, y, z, format, arg...) do { \
+ if (z) { \
+ if ((x > MB86A16_ERROR) && (x > y)) \
+ printk(KERN_ERR "%s: " format "\n", __func__, ##arg); \
+ else if ((x > MB86A16_NOTICE) && (x > y)) \
+ printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \
+ else if ((x > MB86A16_INFO) && (x > y)) \
+ printk(KERN_INFO "%s: " format "\n", __func__, ##arg); \
+ else if ((x > MB86A16_DEBUG) && (x > y)) \
+ printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg); \
+ } else { \
+ if (x > y) \
+ printk(format, ##arg); \
+ } \
+} while (0)
+
+#define TRACE_IN dprintk(verbose, MB86A16_DEBUG, 1, "-->()")
+#define TRACE_OUT dprintk(verbose, MB86A16_DEBUG, 1, "()-->")
+
+static int mb86a16_write(struct mb86a16_state *state, u8 reg, u8 val)
+{
+ int ret;
+ u8 buf[] = { reg, val };
+
+ struct i2c_msg msg = {
+ .addr = state->config->demod_address,
+ .flags = 0,
+ .buf = buf,
+ .len = 2
+ };
+
+ dprintk(verbose, MB86A16_DEBUG, 1,
+ "writing to [0x%02x],Reg[0x%02x],Data[0x%02x]",
+ state->config->demod_address, buf[0], buf[1]);
+
+ ret = i2c_transfer(state->i2c_adap, &msg, 1);
+
+ return (ret != 1) ? -EREMOTEIO : 0;
+}
+
+static int mb86a16_read(struct mb86a16_state *state, u8 reg, u8 *val)
+{
+ int ret;
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+
+ struct i2c_msg msg[] = {
+ {
+ .addr = state->config->demod_address,
+ .flags = 0,
+ .buf = b0,
+ .len = 1
+ }, {
+ .addr = state->config->demod_address,
+ .flags = I2C_M_RD,
+ .buf = b1,
+ .len = 1
+ }
+ };
+ ret = i2c_transfer(state->i2c_adap, msg, 2);
+ if (ret != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "read error(reg=0x%02x, ret=0x%i)",
+ reg, ret);
+
+ return -EREMOTEIO;
+ }
+ *val = b1[0];
+
+ return ret;
+}
+
+static int CNTM_set(struct mb86a16_state *state,
+ unsigned char timint1,
+ unsigned char timint2,
+ unsigned char cnext)
+{
+ unsigned char val;
+
+ val = (timint1 << 4) | (timint2 << 2) | cnext;
+ if (mb86a16_write(state, MB86A16_CNTMR, val) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int smrt_set(struct mb86a16_state *state, int rate)
+{
+ int tmp ;
+ int m ;
+ unsigned char STOFS0, STOFS1;
+
+ m = 1 << state->deci;
+ tmp = (8192 * state->master_clk - 2 * m * rate * 8192 + state->master_clk / 2) / state->master_clk;
+
+ STOFS0 = tmp & 0x0ff;
+ STOFS1 = (tmp & 0xf00) >> 8;
+
+ if (mb86a16_write(state, MB86A16_SRATE1, (state->deci << 2) |
+ (state->csel << 1) |
+ state->rsel) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_SRATE2, STOFS0) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_SRATE3, STOFS1) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -1;
+}
+
+static int srst(struct mb86a16_state *state)
+{
+ if (mb86a16_write(state, MB86A16_RESET, 0x04) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+
+}
+
+static int afcex_data_set(struct mb86a16_state *state,
+ unsigned char AFCEX_L,
+ unsigned char AFCEX_H)
+{
+ if (mb86a16_write(state, MB86A16_AFCEXL, AFCEX_L) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_AFCEXH, AFCEX_H) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+
+ return -1;
+}
+
+static int afcofs_data_set(struct mb86a16_state *state,
+ unsigned char AFCEX_L,
+ unsigned char AFCEX_H)
+{
+ if (mb86a16_write(state, 0x58, AFCEX_L) < 0)
+ goto err;
+ if (mb86a16_write(state, 0x59, AFCEX_H) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int stlp_set(struct mb86a16_state *state,
+ unsigned char STRAS,
+ unsigned char STRBS)
+{
+ if (mb86a16_write(state, MB86A16_STRFILTCOEF1, (STRBS << 3) | (STRAS)) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int Vi_set(struct mb86a16_state *state, unsigned char ETH, unsigned char VIA)
+{
+ if (mb86a16_write(state, MB86A16_VISET2, 0x04) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_VISET3, 0xf5) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int initial_set(struct mb86a16_state *state)
+{
+ if (stlp_set(state, 5, 7))
+ goto err;
+
+ udelay(100);
+ if (afcex_data_set(state, 0, 0))
+ goto err;
+
+ udelay(100);
+ if (afcofs_data_set(state, 0, 0))
+ goto err;
+
+ udelay(100);
+ if (mb86a16_write(state, MB86A16_CRLFILTCOEF1, 0x16) < 0)
+ goto err;
+ if (mb86a16_write(state, 0x2f, 0x21) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_VIMAG, 0x38) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS1, 0x00) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS2, 0x1c) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS3, 0x20) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS4, 0x1e) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_FAGCS5, 0x23) < 0)
+ goto err;
+ if (mb86a16_write(state, 0x54, 0xff) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_TSOUT, 0x00) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int S01T_set(struct mb86a16_state *state,
+ unsigned char s1t,
+ unsigned s0t)
+{
+ if (mb86a16_write(state, 0x33, (s1t << 3) | s0t) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+
+static int EN_set(struct mb86a16_state *state,
+ int cren,
+ int afcen)
+{
+ unsigned char val;
+
+ val = 0x7a | (cren << 7) | (afcen << 2);
+ if (mb86a16_write(state, 0x49, val) < 0)
+ goto err;
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int AFCEXEN_set(struct mb86a16_state *state,
+ int afcexen,
+ int smrt)
+{
+ unsigned char AFCA ;
+
+ if (smrt > 18875)
+ AFCA = 4;
+ else if (smrt > 9375)
+ AFCA = 3;
+ else if (smrt > 2250)
+ AFCA = 2;
+ else
+ AFCA = 1;
+
+ if (mb86a16_write(state, 0x2a, 0x02 | (afcexen << 5) | (AFCA << 2)) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int DAGC_data_set(struct mb86a16_state *state,
+ unsigned char DAGCA,
+ unsigned char DAGCW)
+{
+ if (mb86a16_write(state, 0x2d, (DAGCA << 3) | DAGCW) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static void smrt_info_get(struct mb86a16_state *state, int rate)
+{
+ if (rate >= 37501) {
+ state->deci = 0; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 30001) {
+ state->deci = 0; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 26251) {
+ state->deci = 0; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 22501) {
+ state->deci = 0; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 18751) {
+ state->deci = 1; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 15001) {
+ state->deci = 1; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 13126) {
+ state->deci = 1; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 11251) {
+ state->deci = 1; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 9376) {
+ state->deci = 2; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 7501) {
+ state->deci = 2; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 6563) {
+ state->deci = 2; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 5626) {
+ state->deci = 2; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 4688) {
+ state->deci = 3; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 3751) {
+ state->deci = 3; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 3282) {
+ state->deci = 3; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 2814) {
+ state->deci = 3; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 2344) {
+ state->deci = 4; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 1876) {
+ state->deci = 4; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 1641) {
+ state->deci = 4; state->csel = 1; state->rsel = 0;
+ } else if (rate >= 1407) {
+ state->deci = 4; state->csel = 1; state->rsel = 1;
+ } else if (rate >= 1172) {
+ state->deci = 5; state->csel = 0; state->rsel = 0;
+ } else if (rate >= 939) {
+ state->deci = 5; state->csel = 0; state->rsel = 1;
+ } else if (rate >= 821) {
+ state->deci = 5; state->csel = 1; state->rsel = 0;
+ } else {
+ state->deci = 5; state->csel = 1; state->rsel = 1;
+ }
+
+ if (state->csel == 0)
+ state->master_clk = 92000;
+ else
+ state->master_clk = 61333;
+
+}
+
+static int signal_det(struct mb86a16_state *state,
+ int smrt,
+ unsigned char *SIG)
+{
+
+ int ret ;
+ int smrtd ;
+ int wait_sym ;
+
+ u32 wait_t;
+ unsigned char S[3] ;
+ int i ;
+
+ if (*SIG > 45) {
+ if (CNTM_set(state, 2, 1, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+ return -1;
+ }
+ wait_sym = 40000;
+ } else {
+ if (CNTM_set(state, 3, 1, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+ return -1;
+ }
+ wait_sym = 80000;
+ }
+ for (i = 0; i < 3; i++) {
+ if (i == 0)
+ smrtd = smrt * 98 / 100;
+ else if (i == 1)
+ smrtd = smrt;
+ else
+ smrtd = smrt * 102 / 100;
+ smrt_info_get(state, smrtd);
+ smrt_set(state, smrtd);
+ srst(state);
+ wait_t = (wait_sym + 99 * smrtd / 100) / smrtd;
+ if (wait_t == 0)
+ wait_t = 1;
+ msleep_interruptible(10);
+ if (mb86a16_read(state, 0x37, &(S[i])) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+ }
+ if ((S[1] > S[0] * 112 / 100) &&
+ (S[1] > S[2] * 112 / 100)) {
+
+ ret = 1;
+ } else {
+ ret = 0;
+ }
+ *SIG = S[1];
+
+ if (CNTM_set(state, 0, 1, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+ return -1;
+ }
+
+ return ret;
+}
+
+static int rf_val_set(struct mb86a16_state *state,
+ int f,
+ int smrt,
+ unsigned char R)
+{
+ unsigned char C, F, B;
+ int M;
+ unsigned char rf_val[5];
+ int ack = -1;
+
+ if (smrt > 37750)
+ C = 1;
+ else if (smrt > 18875)
+ C = 2;
+ else if (smrt > 5500)
+ C = 3;
+ else
+ C = 4;
+
+ if (smrt > 30500)
+ F = 3;
+ else if (smrt > 9375)
+ F = 1;
+ else if (smrt > 4625)
+ F = 0;
+ else
+ F = 2;
+
+ if (f < 1060)
+ B = 0;
+ else if (f < 1175)
+ B = 1;
+ else if (f < 1305)
+ B = 2;
+ else if (f < 1435)
+ B = 3;
+ else if (f < 1570)
+ B = 4;
+ else if (f < 1715)
+ B = 5;
+ else if (f < 1845)
+ B = 6;
+ else if (f < 1980)
+ B = 7;
+ else if (f < 2080)
+ B = 8;
+ else
+ B = 9;
+
+ M = f * (1 << R) / 2;
+
+ rf_val[0] = 0x01 | (C << 3) | (F << 1);
+ rf_val[1] = (R << 5) | ((M & 0x1f000) >> 12);
+ rf_val[2] = (M & 0x00ff0) >> 4;
+ rf_val[3] = ((M & 0x0000f) << 4) | B;
+
+ /* Frequency Set */
+ if (mb86a16_write(state, 0x21, rf_val[0]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x22, rf_val[1]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x23, rf_val[2]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x24, rf_val[3]) < 0)
+ ack = 0;
+ if (mb86a16_write(state, 0x25, 0x01) < 0)
+ ack = 0;
+ if (ack == 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "RF Setup - I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int afcerr_chk(struct mb86a16_state *state)
+{
+ unsigned char AFCM_L, AFCM_H ;
+ int AFCM ;
+ int afcm, afcerr ;
+
+ if (mb86a16_read(state, 0x0e, &AFCM_L) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x0f, &AFCM_H) != 2)
+ goto err;
+
+ AFCM = (AFCM_H << 8) + AFCM_L;
+
+ if (AFCM > 2048)
+ afcm = AFCM - 4096;
+ else
+ afcm = AFCM;
+ afcerr = afcm * state->master_clk / 8192;
+
+ return afcerr;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int dagcm_val_get(struct mb86a16_state *state)
+{
+ int DAGCM;
+ unsigned char DAGCM_H, DAGCM_L;
+
+ if (mb86a16_read(state, 0x45, &DAGCM_L) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x46, &DAGCM_H) != 2)
+ goto err;
+
+ DAGCM = (DAGCM_H << 8) + DAGCM_L;
+
+ return DAGCM;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ u8 stat, stat2;
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ *status = 0;
+
+ if (mb86a16_read(state, MB86A16_SIG1, &stat) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_SIG2, &stat2) != 2)
+ goto err;
+ if ((stat > 25) && (stat2 > 25))
+ *status |= FE_HAS_SIGNAL;
+ if ((stat > 45) && (stat2 > 45))
+ *status |= FE_HAS_CARRIER;
+
+ if (mb86a16_read(state, MB86A16_STATUS, &stat) != 2)
+ goto err;
+
+ if (stat & 0x01)
+ *status |= FE_HAS_SYNC;
+ if (stat & 0x01)
+ *status |= FE_HAS_VITERBI;
+
+ if (mb86a16_read(state, MB86A16_FRAMESYNC, &stat) != 2)
+ goto err;
+
+ if ((stat & 0x0f) && (*status & FE_HAS_VITERBI))
+ *status |= FE_HAS_LOCK;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int sync_chk(struct mb86a16_state *state,
+ unsigned char *VIRM)
+{
+ unsigned char val;
+ int sync;
+
+ if (mb86a16_read(state, 0x0d, &val) != 2)
+ goto err;
+
+ dprintk(verbose, MB86A16_INFO, 1, "Status = %02x,", val);
+ sync = val & 0x01;
+ *VIRM = (val & 0x1c) >> 2;
+
+ return sync;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+
+}
+
+static int freqerr_chk(struct mb86a16_state *state,
+ int fTP,
+ int smrt,
+ int unit)
+{
+ unsigned char CRM, AFCML, AFCMH;
+ unsigned char temp1, temp2, temp3;
+ int crm, afcm, AFCM;
+ int crrerr, afcerr; /* kHz */
+ int frqerr; /* MHz */
+ int afcen, afcexen = 0;
+ int R, M, fOSC, fOSC_OFS;
+
+ if (mb86a16_read(state, 0x43, &CRM) != 2)
+ goto err;
+
+ if (CRM > 127)
+ crm = CRM - 256;
+ else
+ crm = CRM;
+
+ crrerr = smrt * crm / 256;
+ if (mb86a16_read(state, 0x49, &temp1) != 2)
+ goto err;
+
+ afcen = (temp1 & 0x04) >> 2;
+ if (afcen == 0) {
+ if (mb86a16_read(state, 0x2a, &temp1) != 2)
+ goto err;
+ afcexen = (temp1 & 0x20) >> 5;
+ }
+
+ if (afcen == 1) {
+ if (mb86a16_read(state, 0x0e, &AFCML) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x0f, &AFCMH) != 2)
+ goto err;
+ } else if (afcexen == 1) {
+ if (mb86a16_read(state, 0x2b, &AFCML) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x2c, &AFCMH) != 2)
+ goto err;
+ }
+ if ((afcen == 1) || (afcexen == 1)) {
+ smrt_info_get(state, smrt);
+ AFCM = ((AFCMH & 0x01) << 8) + AFCML;
+ if (AFCM > 255)
+ afcm = AFCM - 512;
+ else
+ afcm = AFCM;
+
+ afcerr = afcm * state->master_clk / 8192;
+ } else
+ afcerr = 0;
+
+ if (mb86a16_read(state, 0x22, &temp1) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x23, &temp2) != 2)
+ goto err;
+ if (mb86a16_read(state, 0x24, &temp3) != 2)
+ goto err;
+
+ R = (temp1 & 0xe0) >> 5;
+ M = ((temp1 & 0x1f) << 12) + (temp2 << 4) + (temp3 >> 4);
+ if (R == 0)
+ fOSC = 2 * M;
+ else
+ fOSC = M;
+
+ fOSC_OFS = fOSC - fTP;
+
+ if (unit == 0) { /* MHz */
+ if (crrerr + afcerr + fOSC_OFS * 1000 >= 0)
+ frqerr = (crrerr + afcerr + fOSC_OFS * 1000 + 500) / 1000;
+ else
+ frqerr = (crrerr + afcerr + fOSC_OFS * 1000 - 500) / 1000;
+ } else { /* kHz */
+ frqerr = crrerr + afcerr + fOSC_OFS * 1000;
+ }
+
+ return frqerr;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static unsigned char vco_dev_get(struct mb86a16_state *state, int smrt)
+{
+ unsigned char R;
+
+ if (smrt > 9375)
+ R = 0;
+ else
+ R = 1;
+
+ return R;
+}
+
+static void swp_info_get(struct mb86a16_state *state,
+ int fOSC_start,
+ int smrt,
+ int v, int R,
+ int swp_ofs,
+ int *fOSC,
+ int *afcex_freq,
+ unsigned char *AFCEX_L,
+ unsigned char *AFCEX_H)
+{
+ int AFCEX ;
+ int crnt_swp_freq ;
+
+ crnt_swp_freq = fOSC_start * 1000 + v * swp_ofs;
+
+ if (R == 0)
+ *fOSC = (crnt_swp_freq + 1000) / 2000 * 2;
+ else
+ *fOSC = (crnt_swp_freq + 500) / 1000;
+
+ if (*fOSC >= crnt_swp_freq)
+ *afcex_freq = *fOSC * 1000 - crnt_swp_freq;
+ else
+ *afcex_freq = crnt_swp_freq - *fOSC * 1000;
+
+ AFCEX = *afcex_freq * 8192 / state->master_clk;
+ *AFCEX_L = AFCEX & 0x00ff;
+ *AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+
+static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V, int vmax, int vmin,
+ int SIGMIN, int fOSC, int afcex_freq, int swp_ofs, unsigned char *SIG1)
+{
+ int swp_freq ;
+
+ if ((i % 2 == 1) && (v <= vmax)) {
+ /* positive v (case 1) */
+ if ((v - 1 == vmin) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v - 1) >= 0) &&
+ (*(V + 30 + v - 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v - 1) > SIGMIN)) {
+
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+ *SIG1 = *(V + 30 + v - 1);
+ } else if ((v == vmax) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v - 1) >= 0) &&
+ (*(V + 30 + v) > *(V + 30 + v - 1)) &&
+ (*(V + 30 + v) > SIGMIN)) {
+ /* (case 2) */
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else if ((*(V + 30 + v) > 0) &&
+ (*(V + 30 + v - 1) > 0) &&
+ (*(V + 30 + v - 2) > 0) &&
+ (*(V + 30 + v - 3) > 0) &&
+ (*(V + 30 + v - 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v - 2) > *(V + 30 + v - 3)) &&
+ ((*(V + 30 + v - 1) > SIGMIN) ||
+ (*(V + 30 + v - 2) > SIGMIN))) {
+ /* (case 3) */
+ if (*(V + 30 + v - 1) >= *(V + 30 + v - 2)) {
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+ *SIG1 = *(V + 30 + v - 1);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs * 2;
+ *SIG1 = *(V + 30 + v - 2);
+ }
+ } else if ((v == vmax) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v - 1) >= 0) &&
+ (*(V + 30 + v - 2) >= 0) &&
+ (*(V + 30 + v) > *(V + 30 + v - 2)) &&
+ (*(V + 30 + v - 1) > *(V + 30 + v - 2)) &&
+ ((*(V + 30 + v) > SIGMIN) ||
+ (*(V + 30 + v - 1) > SIGMIN))) {
+ /* (case 4) */
+ if (*(V + 30 + v) >= *(V + 30 + v - 1)) {
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+ *SIG1 = *(V + 30 + v - 1);
+ }
+ } else {
+ swp_freq = -1 ;
+ }
+ } else if ((i % 2 == 0) && (v >= vmin)) {
+ /* Negative v (case 1) */
+ if ((*(V + 30 + v) > 0) &&
+ (*(V + 30 + v + 1) > 0) &&
+ (*(V + 30 + v + 2) > 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v + 1) > SIGMIN)) {
+
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ } else if ((v + 1 == vmax) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 1) > SIGMIN)) {
+ /* (case 2) */
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v);
+ } else if ((v == vmin) &&
+ (*(V + 30 + v) > 0) &&
+ (*(V + 30 + v + 1) > 0) &&
+ (*(V + 30 + v + 2) > 0) &&
+ (*(V + 30 + v) > *(V + 30 + v + 1)) &&
+ (*(V + 30 + v) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v) > SIGMIN)) {
+ /* (case 3) */
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else if ((*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 2) >= 0) &&
+ (*(V + 30 + v + 3) >= 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 2) > *(V + 30 + v + 3)) &&
+ ((*(V + 30 + v + 1) > SIGMIN) ||
+ (*(V + 30 + v + 2) > SIGMIN))) {
+ /* (case 4) */
+ if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2;
+ *SIG1 = *(V + 30 + v + 2);
+ }
+ } else if ((*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 2) >= 0) &&
+ (*(V + 30 + v + 3) >= 0) &&
+ (*(V + 30 + v) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v + 2)) &&
+ (*(V + 30 + v) > *(V + 30 + v + 3)) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v + 3)) &&
+ ((*(V + 30 + v) > SIGMIN) ||
+ (*(V + 30 + v + 1) > SIGMIN))) {
+ /* (case 5) */
+ if (*(V + 30 + v) >= *(V + 30 + v + 1)) {
+ swp_freq = fOSC * 1000 + afcex_freq;
+ *SIG1 = *(V + 30 + v);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ }
+ } else if ((v + 2 == vmin) &&
+ (*(V + 30 + v) >= 0) &&
+ (*(V + 30 + v + 1) >= 0) &&
+ (*(V + 30 + v + 2) >= 0) &&
+ (*(V + 30 + v + 1) > *(V + 30 + v)) &&
+ (*(V + 30 + v + 2) > *(V + 30 + v)) &&
+ ((*(V + 30 + v + 1) > SIGMIN) ||
+ (*(V + 30 + v + 2) > SIGMIN))) {
+ /* (case 6) */
+ if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+ *SIG1 = *(V + 30 + v + 1);
+ } else {
+ swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2;
+ *SIG1 = *(V + 30 + v + 2);
+ }
+ } else if ((vmax == 0) && (vmin == 0) && (*(V + 30 + v) > SIGMIN)) {
+ swp_freq = fOSC * 1000;
+ *SIG1 = *(V + 30 + v);
+ } else
+ swp_freq = -1;
+ } else
+ swp_freq = -1;
+
+ return swp_freq;
+}
+
+static void swp_info_get2(struct mb86a16_state *state,
+ int smrt,
+ int R,
+ int swp_freq,
+ int *afcex_freq,
+ int *fOSC,
+ unsigned char *AFCEX_L,
+ unsigned char *AFCEX_H)
+{
+ int AFCEX ;
+
+ if (R == 0)
+ *fOSC = (swp_freq + 1000) / 2000 * 2;
+ else
+ *fOSC = (swp_freq + 500) / 1000;
+
+ if (*fOSC >= swp_freq)
+ *afcex_freq = *fOSC * 1000 - swp_freq;
+ else
+ *afcex_freq = swp_freq - *fOSC * 1000;
+
+ AFCEX = *afcex_freq * 8192 / state->master_clk;
+ *AFCEX_L = AFCEX & 0x00ff;
+ *AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+static void afcex_info_get(struct mb86a16_state *state,
+ int afcex_freq,
+ unsigned char *AFCEX_L,
+ unsigned char *AFCEX_H)
+{
+ int AFCEX ;
+
+ AFCEX = afcex_freq * 8192 / state->master_clk;
+ *AFCEX_L = AFCEX & 0x00ff;
+ *AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+static int SEQ_set(struct mb86a16_state *state, unsigned char loop)
+{
+ /* SLOCK0 = 0 */
+ if (mb86a16_write(state, 0x32, 0x02 | (loop << 2)) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int iq_vt_set(struct mb86a16_state *state, unsigned char IQINV)
+{
+ /* Viterbi Rate, IQ Settings */
+ if (mb86a16_write(state, 0x06, 0xdf | (IQINV << 5)) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int FEC_srst(struct mb86a16_state *state)
+{
+ if (mb86a16_write(state, MB86A16_RESET, 0x02) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int S2T_set(struct mb86a16_state *state, unsigned char S2T)
+{
+ if (mb86a16_write(state, 0x34, 0x70 | S2T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int S45T_set(struct mb86a16_state *state, unsigned char S4T, unsigned char S5T)
+{
+ if (mb86a16_write(state, 0x35, 0x00 | (S5T << 4) | S4T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+
+static int mb86a16_set_fe(struct mb86a16_state *state)
+{
+ u8 agcval, cnmval;
+
+ int i, j;
+ int fOSC = 0;
+ int fOSC_start = 0;
+ int wait_t;
+ int fcp;
+ int swp_ofs;
+ int V[60];
+ u8 SIG1MIN;
+
+ unsigned char CREN, AFCEN, AFCEXEN;
+ unsigned char SIG1;
+ unsigned char TIMINT1, TIMINT2, TIMEXT;
+ unsigned char S0T, S1T;
+ unsigned char S2T;
+/* unsigned char S2T, S3T; */
+ unsigned char S4T, S5T;
+ unsigned char AFCEX_L, AFCEX_H;
+ unsigned char R;
+ unsigned char VIRM;
+ unsigned char ETH, VIA;
+ unsigned char junk;
+
+ int loop;
+ int ftemp;
+ int v, vmax, vmin;
+ int vmax_his, vmin_his;
+ int swp_freq, prev_swp_freq[20];
+ int prev_freq_num;
+ int signal_dupl;
+ int afcex_freq;
+ int signal;
+ int afcerr;
+ int temp_freq, delta_freq;
+ int dagcm[4];
+ int smrt_d;
+/* int freq_err; */
+ int n;
+ int ret = -1;
+ int sync;
+
+ dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate);
+
+ fcp = 3000;
+ swp_ofs = state->srate / 4;
+
+ for (i = 0; i < 60; i++)
+ V[i] = -1;
+
+ for (i = 0; i < 20; i++)
+ prev_swp_freq[i] = 0;
+
+ SIG1MIN = 25;
+
+ for (n = 0; ((n < 3) && (ret == -1)); n++) {
+ SEQ_set(state, 0);
+ iq_vt_set(state, 0);
+
+ CREN = 0;
+ AFCEN = 0;
+ AFCEXEN = 1;
+ TIMINT1 = 0;
+ TIMINT2 = 1;
+ TIMEXT = 2;
+ S1T = 0;
+ S0T = 0;
+
+ if (initial_set(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "initial set failed");
+ return -1;
+ }
+ if (DAGC_data_set(state, 3, 2) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+ return -1;
+ }
+ if (EN_set(state, CREN, AFCEN) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+ return -1; /* (0, 0) */
+ }
+ if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1; /* (1, smrt) = (1, symbolrate) */
+ }
+ if (CNTM_set(state, TIMINT1, TIMINT2, TIMEXT) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error");
+ return -1; /* (0, 1, 2) */
+ }
+ if (S01T_set(state, S1T, S0T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+ return -1; /* (0, 0) */
+ }
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt info get error");
+ return -1;
+ }
+
+ R = vco_dev_get(state, state->srate);
+ if (R == 1)
+ fOSC_start = state->frequency;
+
+ else if (R == 0) {
+ if (state->frequency % 2 == 0) {
+ fOSC_start = state->frequency;
+ } else {
+ fOSC_start = state->frequency + 1;
+ if (fOSC_start > 2150)
+ fOSC_start = state->frequency - 1;
+ }
+ }
+ loop = 1;
+ ftemp = fOSC_start * 1000;
+ vmax = 0 ;
+ while (loop == 1) {
+ ftemp = ftemp + swp_ofs;
+ vmax++;
+
+ /* Upper bound */
+ if (ftemp > 2150000) {
+ loop = 0;
+ vmax--;
+ } else {
+ if ((ftemp == 2150000) ||
+ (ftemp - state->frequency * 1000 >= fcp + state->srate / 4))
+ loop = 0;
+ }
+ }
+
+ loop = 1;
+ ftemp = fOSC_start * 1000;
+ vmin = 0 ;
+ while (loop == 1) {
+ ftemp = ftemp - swp_ofs;
+ vmin--;
+
+ /* Lower bound */
+ if (ftemp < 950000) {
+ loop = 0;
+ vmin++;
+ } else {
+ if ((ftemp == 950000) ||
+ (state->frequency * 1000 - ftemp >= fcp + state->srate / 4))
+ loop = 0;
+ }
+ }
+
+ wait_t = (8000 + state->srate / 2) / state->srate;
+ if (wait_t == 0)
+ wait_t = 1;
+
+ i = 0;
+ j = 0;
+ prev_freq_num = 0;
+ loop = 1;
+ signal = 0;
+ vmax_his = 0;
+ vmin_his = 0;
+ v = 0;
+
+ while (loop == 1) {
+ swp_info_get(state, fOSC_start, state->srate,
+ v, R, swp_ofs, &fOSC,
+ &afcex_freq, &AFCEX_L, &AFCEX_H);
+
+ udelay(100);
+ if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ udelay(100);
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ if (srst(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+ return -1;
+ }
+ msleep_interruptible(wait_t);
+
+ if (mb86a16_read(state, 0x37, &SIG1) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -1;
+ }
+ V[30 + v] = SIG1 ;
+ swp_freq = swp_freq_calcuation(state, i, v, V, vmax, vmin,
+ SIG1MIN, fOSC, afcex_freq,
+ swp_ofs, &SIG1); /* changed */
+
+ signal_dupl = 0;
+ for (j = 0; j < prev_freq_num; j++) {
+ if ((ABS(prev_swp_freq[j] - swp_freq)) < (swp_ofs * 3 / 2)) {
+ signal_dupl = 1;
+ dprintk(verbose, MB86A16_INFO, 1, "Probably Duplicate Signal, j = %d", j);
+ }
+ }
+ if ((signal_dupl == 0) && (swp_freq > 0) && (ABS(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) {
+ dprintk(verbose, MB86A16_DEBUG, 1, "------ Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate);
+ prev_swp_freq[prev_freq_num] = swp_freq;
+ prev_freq_num++;
+ swp_info_get2(state, state->srate, R, swp_freq,
+ &afcex_freq, &fOSC,
+ &AFCEX_L, &AFCEX_H);
+
+ if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ signal = signal_det(state, state->srate, &SIG1);
+ if (signal == 1) {
+ dprintk(verbose, MB86A16_ERROR, 1, "***** Signal Found *****");
+ loop = 0;
+ } else {
+ dprintk(verbose, MB86A16_ERROR, 1, "!!!!! No signal !!!!!, try again...");
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ }
+ }
+ if (v > vmax)
+ vmax_his = 1 ;
+ if (v < vmin)
+ vmin_his = 1 ;
+ i++;
+
+ if ((i % 2 == 1) && (vmax_his == 1))
+ i++;
+ if ((i % 2 == 0) && (vmin_his == 1))
+ i++;
+
+ if (i % 2 == 1)
+ v = (i + 1) / 2;
+ else
+ v = -i / 2;
+
+ if ((vmax_his == 1) && (vmin_his == 1))
+ loop = 0 ;
+ }
+
+ if (signal == 1) {
+ dprintk(verbose, MB86A16_INFO, 1, " Start Freq Error Check");
+ S1T = 7 ;
+ S0T = 1 ;
+ CREN = 0 ;
+ AFCEN = 1 ;
+ AFCEXEN = 0 ;
+
+ if (S01T_set(state, S1T, S0T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+ return -1;
+ }
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ if (EN_set(state, CREN, AFCEN) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+ return -1;
+ }
+ if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1;
+ }
+ afcex_info_get(state, afcex_freq, &AFCEX_L, &AFCEX_H);
+ if (afcofs_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCOFS data set error");
+ return -1;
+ }
+ if (srst(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+ return -1;
+ }
+ /* delay 4~200 */
+ wait_t = 200000 / state->master_clk + 200000 / state->srate;
+ msleep(wait_t);
+ afcerr = afcerr_chk(state);
+ if (afcerr == -1)
+ return -1;
+
+ swp_freq = fOSC * 1000 + afcerr ;
+ AFCEXEN = 1 ;
+ if (state->srate >= 1500)
+ smrt_d = state->srate / 3;
+ else
+ smrt_d = state->srate / 2;
+ smrt_info_get(state, smrt_d);
+ if (smrt_set(state, smrt_d) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ if (AFCEXEN_set(state, AFCEXEN, smrt_d) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1;
+ }
+ R = vco_dev_get(state, smrt_d);
+ if (DAGC_data_set(state, 2, 0) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+ return -1;
+ }
+ for (i = 0; i < 3; i++) {
+ temp_freq = swp_freq + (i - 1) * state->srate / 8;
+ swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+ msleep(wait_t);
+ dagcm[i] = dagcm_val_get(state);
+ }
+ if ((dagcm[0] > dagcm[1]) &&
+ (dagcm[0] > dagcm[2]) &&
+ (dagcm[0] - dagcm[1] > 2 * (dagcm[2] - dagcm[1]))) {
+
+ temp_freq = swp_freq - 2 * state->srate / 8;
+ swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
+ return -1;
+ }
+ wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+ msleep(wait_t);
+ dagcm[3] = dagcm_val_get(state);
+ if (dagcm[3] > dagcm[1])
+ delta_freq = (dagcm[2] - dagcm[0] + dagcm[1] - dagcm[3]) * state->srate / 300;
+ else
+ delta_freq = 0;
+ } else if ((dagcm[2] > dagcm[1]) &&
+ (dagcm[2] > dagcm[0]) &&
+ (dagcm[2] - dagcm[1] > 2 * (dagcm[0] - dagcm[1]))) {
+
+ temp_freq = swp_freq + 2 * state->srate / 8;
+ swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
+ return -1;
+ }
+ wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+ msleep(wait_t);
+ dagcm[3] = dagcm_val_get(state);
+ if (dagcm[3] > dagcm[1])
+ delta_freq = (dagcm[2] - dagcm[0] + dagcm[3] - dagcm[1]) * state->srate / 300;
+ else
+ delta_freq = 0 ;
+
+ } else {
+ delta_freq = 0 ;
+ }
+ dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = %d", swp_freq);
+ swp_freq += delta_freq;
+ dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq);
+ if (ABS(state->frequency * 1000 - swp_freq) > 3800) {
+ dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL !");
+ } else {
+
+ S1T = 0;
+ S0T = 3;
+ CREN = 1;
+ AFCEN = 0;
+ AFCEXEN = 1;
+
+ if (S01T_set(state, S1T, S0T) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+ return -1;
+ }
+ if (DAGC_data_set(state, 0, 0) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+ return -1;
+ }
+ R = vco_dev_get(state, state->srate);
+ smrt_info_get(state, state->srate);
+ if (smrt_set(state, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+ return -1;
+ }
+ if (EN_set(state, CREN, AFCEN) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+ return -1;
+ }
+ if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+ return -1;
+ }
+ swp_info_get2(state, state->srate, R, swp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+ if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+ return -1;
+ }
+ if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+ return -1;
+ }
+ if (srst(state) < 0) {
+ dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+ return -1;
+ }
+ wait_t = 7 + (10000 + state->srate / 2) / state->srate;
+ if (wait_t == 0)
+ wait_t = 1;
+ msleep_interruptible(wait_t);
+ if (mb86a16_read(state, 0x37, &SIG1) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ if (SIG1 > 110) {
+ S2T = 4; S4T = 1; S5T = 6; ETH = 4; VIA = 6;
+ wait_t = 7 + (917504 + state->srate / 2) / state->srate;
+ } else if (SIG1 > 105) {
+ S2T = 4; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (1048576 + state->srate / 2) / state->srate;
+ } else if (SIG1 > 85) {
+ S2T = 5; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (1310720 + state->srate / 2) / state->srate;
+ } else if (SIG1 > 65) {
+ S2T = 6; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (1572864 + state->srate / 2) / state->srate;
+ } else {
+ S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+ wait_t = 7 + (2097152 + state->srate / 2) / state->srate;
+ }
+ wait_t *= 2; /* FOS */
+ S2T_set(state, S2T);
+ S45T_set(state, S4T, S5T);
+ Vi_set(state, ETH, VIA);
+ srst(state);
+ msleep_interruptible(wait_t);
+ sync = sync_chk(state, &VIRM);
+ dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync);
+ if (VIRM) {
+ if (VIRM == 4) {
+ /* 5/6 */
+ if (SIG1 > 110)
+ wait_t = (786432 + state->srate / 2) / state->srate;
+ else
+ wait_t = (1572864 + state->srate / 2) / state->srate;
+ if (state->srate < 5000)
+ /* FIXME ! , should be a long wait ! */
+ msleep_interruptible(wait_t);
+ else
+ msleep_interruptible(wait_t);
+
+ if (sync_chk(state, &junk) == 0) {
+ iq_vt_set(state, 1);
+ FEC_srst(state);
+ }
+ }
+ /* 1/2, 2/3, 3/4, 7/8 */
+ if (SIG1 > 110)
+ wait_t = (786432 + state->srate / 2) / state->srate;
+ else
+ wait_t = (1572864 + state->srate / 2) / state->srate;
+ msleep_interruptible(wait_t);
+ SEQ_set(state, 1);
+ } else {
+ dprintk(verbose, MB86A16_INFO, 1, "NO -- SYNC");
+ SEQ_set(state, 1);
+ ret = -1;
+ }
+ }
+ } else {
+ dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL");
+ ret = -1;
+ }
+
+ sync = sync_chk(state, &junk);
+ if (sync) {
+ dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******");
+ freqerr_chk(state, state->frequency, state->srate, 1);
+ ret = 0;
+ break;
+ }
+ }
+
+ mb86a16_read(state, 0x15, &agcval);
+ mb86a16_read(state, 0x26, &cnmval);
+ dprintk(verbose, MB86A16_INFO, 1, "AGC = %02x CNM = %02x", agcval, cnmval);
+
+ return ret;
+}
+
+static int mb86a16_send_diseqc_msg(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *cmd)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+ int i;
+ u8 regs;
+
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0)
+ goto err;
+
+ regs = 0x18;
+
+ if (cmd->msg_len > 5 || cmd->msg_len < 4)
+ return -EINVAL;
+
+ for (i = 0; i < cmd->msg_len; i++) {
+ if (mb86a16_write(state, regs, cmd->msg[i]) < 0)
+ goto err;
+
+ regs++;
+ }
+ i += 0x90;
+
+ msleep_interruptible(10);
+
+ if (mb86a16_write(state, MB86A16_DCC1, i) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ switch (burst) {
+ case SEC_MINI_A:
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+ MB86A16_DCC1_TBEN |
+ MB86A16_DCC1_TBO) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+ break;
+ case SEC_MINI_B:
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+ MB86A16_DCC1_TBEN) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+ break;
+ }
+
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ if (mb86a16_write(state, MB86A16_TONEOUT2, 0x00) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+ MB86A16_DCC1_CTOE) < 0)
+
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+ goto err;
+ break;
+ case SEC_TONE_OFF:
+ if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0)
+ goto err;
+ if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0)
+ goto err;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ state->frequency = p->frequency / 1000;
+ state->srate = p->u.qpsk.symbol_rate / 1000;
+
+ if (!mb86a16_set_fe(state)) {
+ dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK");
+ return DVBFE_ALGO_SEARCH_SUCCESS;
+ }
+
+ dprintk(verbose, MB86A16_ERROR, 1, "Lock acquisition failed!");
+ return DVBFE_ALGO_SEARCH_FAILED;
+}
+
+static void mb86a16_release(struct dvb_frontend *fe)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+ kfree(state);
+}
+
+static int mb86a16_init(struct dvb_frontend *fe)
+{
+ return 0;
+}
+
+static int mb86a16_sleep(struct dvb_frontend *fe)
+{
+ return 0;
+}
+
+static int mb86a16_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ u8 ber_mon, ber_tab, ber_lsb, ber_mid, ber_msb, ber_tim, ber_rst;
+ u32 timer;
+
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ *ber = 0;
+ if (mb86a16_read(state, MB86A16_BERMON, &ber_mon) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERTAB, &ber_tab) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERLSB, &ber_lsb) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERMID, &ber_mid) != 2)
+ goto err;
+ if (mb86a16_read(state, MB86A16_BERMSB, &ber_msb) != 2)
+ goto err;
+ /* BER monitor invalid when BER_EN = 0 */
+ if (ber_mon & 0x04) {
+ /* coarse, fast calculation */
+ *ber = ber_tab & 0x1f;
+ dprintk(verbose, MB86A16_DEBUG, 1, "BER coarse=[0x%02x]", *ber);
+ if (ber_mon & 0x01) {
+ /*
+ * BER_SEL = 1, The monitored BER is the estimated
+ * value with a Reed-Solomon decoder error amount at
+ * the deinterleaver output.
+ * monitored BER is expressed as a 20 bit output in total
+ */
+ ber_rst = ber_mon >> 3;
+ *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb;
+ if (ber_rst == 0)
+ timer = 12500000;
+ if (ber_rst == 1)
+ timer = 25000000;
+ if (ber_rst == 2)
+ timer = 50000000;
+ if (ber_rst == 3)
+ timer = 100000000;
+
+ *ber /= timer;
+ dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
+ } else {
+ /*
+ * BER_SEL = 0, The monitored BER is the estimated
+ * value with a Viterbi decoder error amount at the
+ * QPSK demodulator output.
+ * monitored BER is expressed as a 24 bit output in total
+ */
+ ber_tim = ber_mon >> 1;
+ *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb;
+ if (ber_tim == 0)
+ timer = 16;
+ if (ber_tim == 1)
+ timer = 24;
+
+ *ber /= 2 ^ timer;
+ dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
+ }
+ }
+ return 0;
+err:
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+}
+
+static int mb86a16_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ u8 agcm = 0;
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ *strength = 0;
+ if (mb86a16_read(state, MB86A16_AGCM, &agcm) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ *strength = ((0xff - agcm) * 100) / 256;
+ dprintk(verbose, MB86A16_DEBUG, 1, "Signal strength=[%d %%]", (u8) *strength);
+ *strength = (0xffff - 0xff) + agcm;
+
+ return 0;
+}
+
+struct cnr {
+ u8 cn_reg;
+ u8 cn_val;
+};
+
+static const struct cnr cnr_tab[] = {
+ { 35, 2 },
+ { 40, 3 },
+ { 50, 4 },
+ { 60, 5 },
+ { 70, 6 },
+ { 80, 7 },
+ { 92, 8 },
+ { 103, 9 },
+ { 115, 10 },
+ { 138, 12 },
+ { 162, 15 },
+ { 180, 18 },
+ { 185, 19 },
+ { 189, 20 },
+ { 195, 22 },
+ { 199, 24 },
+ { 201, 25 },
+ { 202, 26 },
+ { 203, 27 },
+ { 205, 28 },
+ { 208, 30 }
+};
+
+static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct mb86a16_state *state = fe->demodulator_priv;
+ int i = 0;
+ int low_tide = 2, high_tide = 30, q_level;
+ u8 cn;
+
+ *snr = 0;
+ if (mb86a16_read(state, 0x26, &cn) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cnr_tab); i++) {
+ if (cn < cnr_tab[i].cn_reg) {
+ *snr = cnr_tab[i].cn_val;
+ break;
+ }
+ }
+ q_level = (*snr * 100) / (high_tide - low_tide);
+ dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level);
+ *snr = (0xffff - 0xff) + *snr;
+
+ return 0;
+}
+
+static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ u8 dist;
+ struct mb86a16_state *state = fe->demodulator_priv;
+
+ if (mb86a16_read(state, MB86A16_DISTMON, &dist) != 2) {
+ dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+ return -EREMOTEIO;
+ }
+ *ucblocks = dist;
+
+ return 0;
+}
+
+static enum dvbfe_algo mb86a16_frontend_algo(struct dvb_frontend *fe)
+{
+ return DVBFE_ALGO_CUSTOM;
+}
+
+static struct dvb_frontend_ops mb86a16_ops = {
+ .info = {
+ .name = "Fujitsu MB86A16 DVB-S",
+ .type = FE_QPSK,
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 3000,
+ .frequency_tolerance = 0,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .symbol_rate_tolerance = 500,
+ .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_7_8 | FE_CAN_QPSK |
+ FE_CAN_FEC_AUTO
+ },
+ .release = mb86a16_release,
+
+ .get_frontend_algo = mb86a16_frontend_algo,
+ .search = mb86a16_search,
+ .read_status = mb86a16_read_status,
+ .init = mb86a16_init,
+ .sleep = mb86a16_sleep,
+ .read_status = mb86a16_read_status,
+
+ .read_ber = mb86a16_read_ber,
+ .read_signal_strength = mb86a16_read_signal_strength,
+ .read_snr = mb86a16_read_snr,
+ .read_ucblocks = mb86a16_read_ucblocks,
+
+ .diseqc_send_master_cmd = mb86a16_send_diseqc_msg,
+ .diseqc_send_burst = mb86a16_send_diseqc_burst,
+ .set_tone = mb86a16_set_tone,
+};
+
+struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+ struct i2c_adapter *i2c_adap)
+{
+ u8 dev_id = 0;
+ struct mb86a16_state *state = NULL;
+
+ state = kmalloc(sizeof(struct mb86a16_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ state->config = config;
+ state->i2c_adap = i2c_adap;
+
+ mb86a16_read(state, 0x7f, &dev_id);
+ if (dev_id != 0xfe)
+ goto error;
+
+ memcpy(&state->frontend.ops, &mb86a16_ops, sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+ state->frontend.ops.set_voltage = state->config->set_voltage;
+
+ return &state->frontend;
+error:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(mb86a16_attach);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Manu Abraham");
diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb/frontends/mb86a16.h
new file mode 100644
index 0000000..6ea8c37
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a16.h
@@ -0,0 +1,52 @@
+/*
+ Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MB86A16_H
+#define __MB86A16_H
+
+#include <linux/dvb/frontend.h>
+#include "dvb_frontend.h"
+
+
+struct mb86a16_config {
+ u8 demod_address;
+
+ int (*set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+};
+
+
+
+#if defined(CONFIG_DVB_MB86A16) || (defined(CONFIG_DVB_MB86A16_MODULE) && defined(MODULE))
+
+extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+ struct i2c_adapter *i2c_adap);
+
+#else
+
+static inline struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+ struct i2c_adapter *i2c_adap)
+{
+ printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+
+#endif /* CONFIG_DVB_MB86A16 */
+
+#endif /* __MB86A16_H */
diff --git a/drivers/media/dvb/frontends/mb86a16_priv.h b/drivers/media/dvb/frontends/mb86a16_priv.h
new file mode 100644
index 0000000..360a35a
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a16_priv.h
@@ -0,0 +1,151 @@
+/*
+ Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MB86A16_PRIV_H
+#define __MB86A16_PRIV_H
+
+#define MB86A16_TSOUT 0x00
+#define MB86A16_TSOUT_HIZSEL (0x01 << 5)
+#define MB86A16_TSOUT_HIZCNTI (0x01 << 4)
+#define MB86A16_TSOUT_MODE (0x01 << 3)
+#define MB86A16_TSOUT_ORDER (0x01 << 2)
+#define MB86A16_TSOUT_ERROR (0x01 << 1)
+#define Mb86A16_TSOUT_EDGE (0x01 << 0)
+
+#define MB86A16_FEC 0x01
+#define MB86A16_FEC_FSYNC (0x01 << 5)
+#define MB86A16_FEC_PCKB8 (0x01 << 4)
+#define MB86A16_FEC_DVDS (0x01 << 3)
+#define MB86A16_FEC_EREN (0x01 << 2)
+#define Mb86A16_FEC_RSEN (0x01 << 1)
+#define MB86A16_FEC_DIEN (0x01 << 0)
+
+#define MB86A16_AGC 0x02
+#define MB86A16_AGC_AGMD (0x01 << 6)
+#define MB86A16_AGC_AGCW (0x0f << 2)
+#define MB86A16_AGC_AGCP (0x01 << 1)
+#define MB86A16_AGC_AGCR (0x01 << 0)
+
+#define MB86A16_SRATE1 0x03
+#define MB86A16_SRATE1_DECI (0x07 << 2)
+#define MB86A16_SRATE1_CSEL (0x01 << 1)
+#define MB86A16_SRATE1_RSEL (0x01 << 0)
+
+#define MB86A16_SRATE2 0x04
+#define MB86A16_SRATE2_STOFSL (0xff << 0)
+
+#define MB86A16_SRATE3 0x05
+#define MB86A16_SRATE2_STOFSH (0xff << 0)
+
+#define MB86A16_VITERBI 0x06
+#define MB86A16_FRAMESYNC 0x07
+#define MB86A16_CRLFILTCOEF1 0x08
+#define MB86A16_CRLFILTCOEF2 0x09
+#define MB86A16_STRFILTCOEF1 0x0a
+#define MB86A16_STRFILTCOEF2 0x0b
+#define MB86A16_RESET 0x0c
+#define MB86A16_STATUS 0x0d
+#define MB86A16_AFCML 0x0e
+#define MB86A16_AFCMH 0x0f
+#define MB86A16_BERMON 0x10
+#define MB86A16_BERTAB 0x11
+#define MB86A16_BERLSB 0x12
+#define MB86A16_BERMID 0x13
+#define MB86A16_BERMSB 0x14
+#define MB86A16_AGCM 0x15
+
+#define MB86A16_DCC1 0x16
+#define MB86A16_DCC1_DISTA (0x01 << 7)
+#define MB86A16_DCC1_PRTY (0x01 << 6)
+#define MB86A16_DCC1_CTOE (0x01 << 5)
+#define MB86A16_DCC1_TBEN (0x01 << 4)
+#define MB86A16_DCC1_TBO (0x01 << 3)
+#define MB86A16_DCC1_NUM (0x07 << 0)
+
+#define MB86A16_DCC2 0x17
+#define MB86A16_DCC2_DCBST (0x01 << 0)
+
+#define MB86A16_DCC3 0x18
+#define MB86A16_DCC3_CODE0 (0xff << 0)
+
+#define MB86A16_DCC4 0x19
+#define MB86A16_DCC4_CODE1 (0xff << 0)
+
+#define MB86A16_DCC5 0x1a
+#define MB86A16_DCC5_CODE2 (0xff << 0)
+
+#define MB86A16_DCC6 0x1b
+#define MB86A16_DCC6_CODE3 (0xff << 0)
+
+#define MB86A16_DCC7 0x1c
+#define MB86A16_DCC7_CODE4 (0xff << 0)
+
+#define MB86A16_DCC8 0x1d
+#define MB86A16_DCC8_CODE5 (0xff << 0)
+
+#define MB86A16_DCCOUT 0x1e
+#define MB86A16_DCCOUT_DISEN (0x01 << 0)
+
+#define MB86A16_TONEOUT1 0x1f
+#define MB86A16_TONE_TDIVL (0xff << 0)
+
+#define MB86A16_TONEOUT2 0x20
+#define MB86A16_TONE_TMD (0x03 << 2)
+#define MB86A16_TONE_TDIVH (0x03 << 0)
+
+#define MB86A16_FREQ1 0x21
+#define MB86A16_FREQ2 0x22
+#define MB86A16_FREQ3 0x23
+#define MB86A16_FREQ4 0x24
+#define MB86A16_FREQSET 0x25
+#define MB86A16_CNM 0x26
+#define MB86A16_PORT0 0x27
+#define MB86A16_PORT1 0x28
+#define MB86A16_DRCFILT 0x29
+#define MB86A16_AFC 0x2a
+#define MB86A16_AFCEXL 0x2b
+#define MB86A16_AFCEXH 0x2c
+#define MB86A16_DAGC 0x2d
+#define MB86A16_SEQMODE 0x32
+#define MB86A16_S0S1T 0x33
+#define MB86A16_S2S3T 0x34
+#define MB86A16_S4S5T 0x35
+#define MB86A16_CNTMR 0x36
+#define MB86A16_SIG1 0x37
+#define MB86A16_SIG2 0x38
+#define MB86A16_VIMAG 0x39
+#define MB86A16_VISET1 0x3a
+#define MB86A16_VISET2 0x3b
+#define MB86A16_VISET3 0x3c
+#define MB86A16_FAGCS1 0x3d
+#define MB86A16_FAGCS2 0x3e
+#define MB86A16_FAGCS3 0x3f
+#define MB86A16_FAGCS4 0x40
+#define MB86A16_FAGCS5 0x41
+#define MB86A16_FAGCS6 0x42
+#define MB86A16_CRM 0x43
+#define MB86A16_STRM 0x44
+#define MB86A16_DAGCML 0x45
+#define MB86A16_DAGCMH 0x46
+#define MB86A16_QPSKTST 0x49
+#define MB86A16_DISTMON 0x52
+#define MB86A16_VERSION 0x7f
+
+#endif /* __MB86A16_PRIV_H */
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index 6c1dbf9..6ca533e 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -426,6 +426,10 @@
id = tda10021_readreg(state, 0x1a);
if ((id & 0xf0) != 0x70) goto error;
+ /* Don't claim TDA10023 */
+ if (id == 0x7d)
+ goto error;
+
printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
state->config->demod_address, id);
diff --git a/drivers/media/dvb/frontends/tda665x.c b/drivers/media/dvb/frontends/tda665x.c
new file mode 100644
index 0000000..87d5273
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda665x.c
@@ -0,0 +1,257 @@
+/*
+ TDA665x tuner driver
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "dvb_frontend.h"
+#include "tda665x.h"
+
+struct tda665x_state {
+ struct dvb_frontend *fe;
+ struct i2c_adapter *i2c;
+ const struct tda665x_config *config;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+static int tda665x_read(struct tda665x_state *state, u8 *buf)
+{
+ const struct tda665x_config *config = state->config;
+ int err = 0;
+ struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD, .buf = buf, .len = 2 };
+
+ err = i2c_transfer(state->i2c, &msg, 1);
+ if (err != 1)
+ goto exit;
+
+ return err;
+exit:
+ printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
+ return err;
+}
+
+static int tda665x_write(struct tda665x_state *state, u8 *buf, u8 length)
+{
+ const struct tda665x_config *config = state->config;
+ int err = 0;
+ struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = length };
+
+ err = i2c_transfer(state->i2c, &msg, 1);
+ if (err != 1)
+ goto exit;
+
+ return err;
+exit:
+ printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
+ return err;
+}
+
+static int tda665x_get_state(struct dvb_frontend *fe,
+ enum tuner_param param,
+ struct tuner_state *tstate)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+ int err = 0;
+
+ switch (param) {
+ case DVBFE_TUNER_FREQUENCY:
+ tstate->frequency = state->frequency;
+ break;
+ case DVBFE_TUNER_BANDWIDTH:
+ break;
+ default:
+ printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
+ err = -EINVAL;
+ break;
+ }
+
+ return err;
+}
+
+static int tda665x_get_status(struct dvb_frontend *fe, u32 *status)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+ u8 result = 0;
+ int err = 0;
+
+ *status = 0;
+
+ err = tda665x_read(state, &result);
+ if (err < 0)
+ goto exit;
+
+ if ((result >> 6) & 0x01) {
+ printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__);
+ *status = 1;
+ }
+
+ return err;
+exit:
+ printk(KERN_ERR "%s: I/O Error\n", __func__);
+ return err;
+}
+
+static int tda665x_set_state(struct dvb_frontend *fe,
+ enum tuner_param param,
+ struct tuner_state *tstate)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+ const struct tda665x_config *config = state->config;
+ u32 frequency, status = 0;
+ u8 buf[4];
+ int err = 0;
+
+ if (param & DVBFE_TUNER_FREQUENCY) {
+
+ frequency = tstate->frequency;
+ if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) {
+ printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", __func__, frequency);
+ return -EINVAL;
+ }
+
+ frequency += config->frequency_offst;
+ frequency *= config->ref_multiplier;
+ frequency += config->ref_divider >> 1;
+ frequency /= config->ref_divider;
+
+ buf[0] = (u8) (frequency & 0x7f00) >> 8;
+ buf[1] = (u8) (frequency & 0x00ff) >> 0;
+ buf[2] = 0x80 | 0x40 | 0x02;
+ buf[3] = 0x00;
+
+ /* restore frequency */
+ frequency = tstate->frequency;
+
+ if (frequency < 153000000) {
+ /* VHF-L */
+ buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */
+ if (frequency < 68000000)
+ buf[3] |= 0x40; /* 83uA */
+ if (frequency < 1040000000)
+ buf[3] |= 0x60; /* 122uA */
+ if (frequency < 1250000000)
+ buf[3] |= 0x80; /* 163uA */
+ else
+ buf[3] |= 0xa0; /* 254uA */
+ } else if (frequency < 438000000) {
+ /* VHF-H */
+ buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */
+ if (frequency < 230000000)
+ buf[3] |= 0x40;
+ if (frequency < 300000000)
+ buf[3] |= 0x60;
+ else
+ buf[3] |= 0x80;
+ } else {
+ /* UHF */
+ buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */
+ if (frequency < 470000000)
+ buf[3] |= 0x60;
+ if (frequency < 526000000)
+ buf[3] |= 0x80;
+ else
+ buf[3] |= 0xa0;
+ }
+
+ /* Set params */
+ err = tda665x_write(state, buf, 5);
+ if (err < 0)
+ goto exit;
+
+ /* sleep for some time */
+ printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__);
+ msleep(20);
+ /* check status */
+ err = tda665x_get_status(fe, &status);
+ if (err < 0)
+ goto exit;
+
+ if (status == 1) {
+ printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", __func__, status);
+ state->frequency = frequency; /* cache successful state */
+ } else {
+ printk(KERN_ERR "%s: No Phase lock: status=%d\n", __func__, status);
+ }
+ } else {
+ printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
+ return -EINVAL;
+ }
+
+ return 0;
+exit:
+ printk(KERN_ERR "%s: I/O Error\n", __func__);
+ return err;
+}
+
+static int tda665x_release(struct dvb_frontend *fe)
+{
+ struct tda665x_state *state = fe->tuner_priv;
+
+ fe->tuner_priv = NULL;
+ kfree(state);
+ return 0;
+}
+
+static struct dvb_tuner_ops tda665x_ops = {
+
+ .set_state = tda665x_set_state,
+ .get_state = tda665x_get_state,
+ .get_status = tda665x_get_status,
+ .release = tda665x_release
+};
+
+struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+ const struct tda665x_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct tda665x_state *state = NULL;
+ struct dvb_tuner_info *info;
+
+ state = kzalloc(sizeof(struct tda665x_state), GFP_KERNEL);
+ if (state == NULL)
+ goto exit;
+
+ state->config = config;
+ state->i2c = i2c;
+ state->fe = fe;
+ fe->tuner_priv = state;
+ fe->ops.tuner_ops = tda665x_ops;
+ info = &fe->ops.tuner_ops.info;
+
+ memcpy(info->name, config->name, sizeof(config->name));
+ info->frequency_min = config->frequency_min;
+ info->frequency_max = config->frequency_max;
+ info->frequency_step = config->frequency_offst;
+
+ printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name);
+
+ return fe;
+
+exit:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(tda665x_attach);
+
+MODULE_DESCRIPTION("TDA665x driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda665x.h b/drivers/media/dvb/frontends/tda665x.h
new file mode 100644
index 0000000..ec7927a
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda665x.h
@@ -0,0 +1,52 @@
+/*
+ TDA665x tuner driver
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __TDA665x_H
+#define __TDA665x_H
+
+struct tda665x_config {
+ char name[128];
+
+ u8 addr;
+ u32 frequency_min;
+ u32 frequency_max;
+ u32 frequency_offst;
+ u32 ref_multiplier;
+ u32 ref_divider;
+};
+
+#if defined(CONFIG_DVB_TDA665x) || (defined(CONFIG_DVB_TDA665x_MODULE) && defined(MODULE))
+
+extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+ const struct tda665x_config *config,
+ struct i2c_adapter *i2c);
+
+#else
+
+static inline struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+ const struct tda665x_config *config,
+ struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+
+#endif /* CONFIG_DVB_TDA665x */
+
+#endif /* __TDA665x_H */
diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig
new file mode 100644
index 0000000..f7b72a3
--- /dev/null
+++ b/drivers/media/dvb/mantis/Kconfig
@@ -0,0 +1,32 @@
+config MANTIS_CORE
+ tristate "Mantis/Hopper PCI bridge based devices"
+ depends on PCI && I2C && INPUT
+
+ help
+ Support for PCI cards based on the Mantis and Hopper PCi bridge.
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_MANTIS
+ tristate "MANTIS based cards"
+ depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+ select DVB_MB86A16
+ select DVB_ZL10353
+ select DVB_STV0299
+ select DVB_PLL
+ help
+ Support for PCI cards based on the Mantis PCI bridge.
+ Say Y when you have a Mantis based DVB card and want to use it.
+
+ If unsure say N.
+
+config DVB_HOPPER
+ tristate "HOPPER based cards"
+ depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+ select DVB_ZL10353
+ select DVB_PLL
+ help
+ Support for PCI cards based on the Hopper PCI bridge.
+ Say Y when you have a Hopper based DVB card and want to use it.
+
+ If unsure say N
diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile
new file mode 100644
index 0000000..98dc5cd
--- /dev/null
+++ b/drivers/media/dvb/mantis/Makefile
@@ -0,0 +1,28 @@
+mantis_core-objs := mantis_ioc.o \
+ mantis_uart.o \
+ mantis_dma.o \
+ mantis_pci.o \
+ mantis_i2c.o \
+ mantis_dvb.o \
+ mantis_evm.o \
+ mantis_hif.o \
+ mantis_ca.o \
+ mantis_pcmcia.o \
+ mantis_input.o
+
+mantis-objs := mantis_cards.o \
+ mantis_vp1033.o \
+ mantis_vp1034.o \
+ mantis_vp1041.o \
+ mantis_vp2033.o \
+ mantis_vp2040.o \
+ mantis_vp3030.o
+
+hopper-objs := hopper_cards.o \
+ hopper_vp3028.o
+
+obj-$(CONFIG_MANTIS_CORE) += mantis_core.o
+obj-$(CONFIG_DVB_MANTIS) += mantis.o
+obj-$(CONFIG_DVB_HOPPER) += hopper.o
+
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c
new file mode 100644
index 0000000..d073c61
--- /dev/null
+++ b/drivers/media/dvb/mantis/hopper_cards.c
@@ -0,0 +1,275 @@
+/*
+ Hopper PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "hopper_vp3028.h"
+#include "mantis_dma.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+#define DRIVER_NAME "Hopper"
+
+static char *label[10] = {
+ "DMA",
+ "IRQ-0",
+ "IRQ-1",
+ "OCERR",
+ "PABRT",
+ "RIPRR",
+ "PPERR",
+ "FTRGT",
+ "RISCI",
+ "RACK"
+};
+
+static int devs;
+
+static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
+{
+ u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+ u32 rst_stat = 0, rst_mask = 0;
+
+ struct mantis_pci *mantis;
+ struct mantis_ca *ca;
+
+ mantis = (struct mantis_pci *) dev_id;
+ if (unlikely(mantis == NULL)) {
+ dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+ return IRQ_NONE;
+ }
+ ca = mantis->mantis_ca;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+ if (!(stat & mask))
+ return IRQ_NONE;
+
+ rst_mask = MANTIS_GPIF_WRACK |
+ MANTIS_GPIF_OTHERR |
+ MANTIS_SBUF_WSTO |
+ MANTIS_GPIF_EXTIRQ;
+
+ rst_stat = mmread(MANTIS_GPIF_STATUS);
+ rst_stat &= rst_mask;
+ mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+ mantis->mantis_int_stat = stat;
+ mantis->mantis_int_mask = mask;
+ dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+ if (stat & MANTIS_INT_RISCEN) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+ }
+ if (stat & MANTIS_INT_IRQ0) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+ mantis->gpif_status = rst_stat;
+ wake_up(&ca->hif_write_wq);
+ schedule_work(&ca->hif_evm_work);
+ }
+ if (stat & MANTIS_INT_IRQ1) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+ schedule_work(&mantis->uart_work);
+ }
+ if (stat & MANTIS_INT_OCERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+ }
+ if (stat & MANTIS_INT_PABORT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+ }
+ if (stat & MANTIS_INT_RIPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+ }
+ if (stat & MANTIS_INT_PPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+ }
+ if (stat & MANTIS_INT_FTRGT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+ }
+ if (stat & MANTIS_INT_RISCI) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+ mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ tasklet_schedule(&mantis->tasklet);
+ }
+ if (stat & MANTIS_INT_I2CDONE) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+ wake_up(&mantis->i2c_wq);
+ }
+ mmwrite(stat, MANTIS_INT_STAT);
+ stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
+ MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
+ MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
+ MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
+ MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
+ MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
+ MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
+ MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
+ MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
+ MANTIS_INT_RISCI);
+
+ if (stat)
+ dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+ return IRQ_HANDLED;
+}
+
+static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+ int err = 0;
+
+ mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
+ if (mantis == NULL) {
+ printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ mantis->num = devs;
+ mantis->verbose = verbose;
+ mantis->pdev = pdev;
+ config = (struct mantis_hwconfig *) pci_id->driver_data;
+ config->irq_handler = &hopper_irq_handler;
+ mantis->hwconfig = config;
+
+ err = mantis_pci_init(mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_stream_control(mantis, STREAM_TO_HIF);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_get_mac(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+ goto fail3;
+ }
+
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+ goto fail4;
+ }
+ devs++;
+
+ return err;
+
+fail4:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+ mantis_dma_exit(mantis);
+
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+ mantis_i2c_exit(mantis);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+ mantis_pci_exit(mantis);
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+ kfree(mantis);
+
+fail0:
+ return err;
+}
+
+static void __devexit hopper_pci_remove(struct pci_dev *pdev)
+{
+ struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+ if (mantis) {
+ mantis_dvb_exit(mantis);
+ mantis_dma_exit(mantis);
+ mantis_i2c_exit(mantis);
+ mantis_pci_exit(mantis);
+ kfree(mantis);
+ }
+ return;
+
+}
+
+static struct pci_device_id hopper_pci_table[] = {
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config),
+ { }
+};
+
+static struct pci_driver hopper_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = hopper_pci_table,
+ .probe = hopper_pci_probe,
+ .remove = hopper_pci_remove,
+};
+
+static int __devinit hopper_init(void)
+{
+ return pci_register_driver(&hopper_pci_driver);
+}
+
+static void __devexit hopper_exit(void)
+{
+ return pci_unregister_driver(&hopper_pci_driver);
+}
+
+module_init(hopper_init);
+module_exit(hopper_exit);
+
+MODULE_DESCRIPTION("HOPPER driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c
new file mode 100644
index 0000000..96674c7
--- /dev/null
+++ b/drivers/media/dvb/mantis/hopper_vp3028.c
@@ -0,0 +1,88 @@
+/*
+ Hopper VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "hopper_vp3028.h"
+
+struct zl10353_config hopper_vp3028_config = {
+ .demod_address = 0x0f,
+};
+
+#define MANTIS_MODEL_NAME "VP-3028"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int err = 0;
+
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ err = mantis_frontend_power(mantis, POWER_ON);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ msleep(250);
+ dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+ fe = zl10353_attach(&hopper_vp3028_config, adapter);
+
+ if (!fe)
+ return -1;
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp3028_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp3028_frontend_init,
+ .power = GPIF_A00,
+ .reset = GPIF_A03,
+};
diff --git a/drivers/media/dvb/mantis/hopper_vp3028.h b/drivers/media/dvb/mantis/hopper_vp3028.h
new file mode 100644
index 0000000..5723949
--- /dev/null
+++ b/drivers/media/dvb/mantis/hopper_vp3028.h
@@ -0,0 +1,30 @@
+/*
+ Hopper VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3028_DVB_T 0x0028
+
+extern struct mantis_hwconfig vp3028_config;
+
+#endif /* __MANTIS_VP3028_H */
diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c
new file mode 100644
index 0000000..403ce04
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ca.c
@@ -0,0 +1,207 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h"
+#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+#include "mantis_ca.h"
+
+static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_read_mem(ca, addr);
+}
+
+static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_write_mem(ca, addr, data);
+}
+
+static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_read_iom(ca, addr);
+}
+
+static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_write_iom(ca, addr, data);
+}
+
+static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
+ udelay(500); /* Wait.. */
+ mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */
+ udelay(500);
+ mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */
+ msleep(1000);
+ dvb_ca_en50221_camready_irq(&ca->en50221, 0);
+
+ return 0;
+}
+
+static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
+
+ return 0;
+}
+
+static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
+/* mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */
+
+ return 0;
+}
+
+static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
+
+ if (ca->slot_state == MODULE_INSERTED) {
+ dprintk(MANTIS_DEBUG, 1, "CA Module present and ready");
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ } else {
+ dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready");
+ }
+
+ return 0;
+}
+
+int mantis_ca_init(struct mantis_pci *mantis)
+{
+ struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter;
+ struct mantis_ca *ca;
+ int ca_flags = 0, result;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA");
+ ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL);
+ if (!ca) {
+ dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting ..");
+ result = -ENOMEM;
+ goto err;
+ }
+
+ ca->ca_priv = mantis;
+ mantis->mantis_ca = ca;
+ ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
+ /* register CA interface */
+ ca->en50221.owner = THIS_MODULE;
+ ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem;
+ ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem;
+ ca->en50221.read_cam_control = mantis_ca_read_cam_ctl;
+ ca->en50221.write_cam_control = mantis_ca_write_cam_ctl;
+ ca->en50221.slot_reset = mantis_ca_slot_reset;
+ ca->en50221.slot_shutdown = mantis_ca_slot_shutdown;
+ ca->en50221.slot_ts_enable = mantis_ts_control;
+ ca->en50221.poll_slot_status = mantis_slot_status;
+ ca->en50221.data = ca;
+
+ mutex_init(&ca->ca_lock);
+
+ init_waitqueue_head(&ca->hif_data_wq);
+ init_waitqueue_head(&ca->hif_opdone_wq);
+ init_waitqueue_head(&ca->hif_write_wq);
+
+ dprintk(MANTIS_ERROR, 1, "Registering EN50221 device");
+ result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1);
+ if (result != 0) {
+ dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result);
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1, "Registered EN50221 device");
+ mantis_evmgr_init(ca);
+ return 0;
+err:
+ kfree(ca);
+ return result;
+}
+EXPORT_SYMBOL_GPL(mantis_ca_init);
+
+void mantis_ca_exit(struct mantis_pci *mantis)
+{
+ struct mantis_ca *ca = mantis->mantis_ca;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis CA exit");
+
+ mantis_evmgr_exit(ca);
+ dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device");
+ if (ca)
+ dvb_ca_en50221_release(&ca->en50221);
+
+ kfree(ca);
+}
+EXPORT_SYMBOL_GPL(mantis_ca_exit);
diff --git a/drivers/media/dvb/mantis/mantis_ca.h b/drivers/media/dvb/mantis/mantis_ca.h
new file mode 100644
index 0000000..dc63e55
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ca.h
@@ -0,0 +1,27 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_CA_H
+#define __MANTIS_CA_H
+
+extern int mantis_ca_init(struct mantis_pci *mantis);
+extern void mantis_ca_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CA_H */
diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c
new file mode 100644
index 0000000..16f1708
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_cards.c
@@ -0,0 +1,305 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+static int devs;
+
+#define DRIVER_NAME "Mantis"
+
+static char *label[10] = {
+ "DMA",
+ "IRQ-0",
+ "IRQ-1",
+ "OCERR",
+ "PABRT",
+ "RIPRR",
+ "PPERR",
+ "FTRGT",
+ "RISCI",
+ "RACK"
+};
+
+static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
+{
+ u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+ u32 rst_stat = 0, rst_mask = 0;
+
+ struct mantis_pci *mantis;
+ struct mantis_ca *ca;
+
+ mantis = (struct mantis_pci *) dev_id;
+ if (unlikely(mantis == NULL)) {
+ dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+ return IRQ_NONE;
+ }
+ ca = mantis->mantis_ca;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+ if (!(stat & mask))
+ return IRQ_NONE;
+
+ rst_mask = MANTIS_GPIF_WRACK |
+ MANTIS_GPIF_OTHERR |
+ MANTIS_SBUF_WSTO |
+ MANTIS_GPIF_EXTIRQ;
+
+ rst_stat = mmread(MANTIS_GPIF_STATUS);
+ rst_stat &= rst_mask;
+ mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+ mantis->mantis_int_stat = stat;
+ mantis->mantis_int_mask = mask;
+ dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+ if (stat & MANTIS_INT_RISCEN) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+ }
+ if (stat & MANTIS_INT_IRQ0) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+ mantis->gpif_status = rst_stat;
+ wake_up(&ca->hif_write_wq);
+ schedule_work(&ca->hif_evm_work);
+ }
+ if (stat & MANTIS_INT_IRQ1) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+ schedule_work(&mantis->uart_work);
+ }
+ if (stat & MANTIS_INT_OCERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+ }
+ if (stat & MANTIS_INT_PABORT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+ }
+ if (stat & MANTIS_INT_RIPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+ }
+ if (stat & MANTIS_INT_PPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+ }
+ if (stat & MANTIS_INT_FTRGT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+ }
+ if (stat & MANTIS_INT_RISCI) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+ mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ tasklet_schedule(&mantis->tasklet);
+ }
+ if (stat & MANTIS_INT_I2CDONE) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+ wake_up(&mantis->i2c_wq);
+ }
+ mmwrite(stat, MANTIS_INT_STAT);
+ stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
+ MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
+ MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
+ MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
+ MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
+ MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
+ MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
+ MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
+ MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
+ MANTIS_INT_RISCI);
+
+ if (stat)
+ dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+ return IRQ_HANDLED;
+}
+
+static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+ int err = 0;
+
+ mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
+ if (mantis == NULL) {
+ printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ mantis->num = devs;
+ mantis->verbose = verbose;
+ mantis->pdev = pdev;
+ config = (struct mantis_hwconfig *) pci_id->driver_data;
+ config->irq_handler = &mantis_irq_handler;
+ mantis->hwconfig = config;
+
+ err = mantis_pci_init(mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_stream_control(mantis, STREAM_TO_HIF);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_get_mac(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+ goto fail3;
+ }
+
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+ goto fail4;
+ }
+ err = mantis_uart_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err);
+ goto fail6;
+ }
+
+ devs++;
+
+ return err;
+
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err);
+ mantis_uart_exit(mantis);
+
+fail6:
+fail4:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+ mantis_dma_exit(mantis);
+
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+ mantis_i2c_exit(mantis);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+ mantis_pci_exit(mantis);
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+ kfree(mantis);
+
+fail0:
+ return err;
+}
+
+static void __devexit mantis_pci_remove(struct pci_dev *pdev)
+{
+ struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+ if (mantis) {
+
+ mantis_uart_exit(mantis);
+ mantis_dvb_exit(mantis);
+ mantis_dma_exit(mantis);
+ mantis_i2c_exit(mantis);
+ mantis_pci_exit(mantis);
+ kfree(mantis);
+ }
+ return;
+}
+
+static struct pci_device_id mantis_pci_table[] = {
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config),
+ MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config),
+ MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config),
+ MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config),
+ MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config),
+ MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config),
+ { }
+};
+
+static struct pci_driver mantis_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = mantis_pci_table,
+ .probe = mantis_pci_probe,
+ .remove = mantis_pci_remove,
+};
+
+static int __devinit mantis_init(void)
+{
+ return pci_register_driver(&mantis_pci_driver);
+}
+
+static void __devexit mantis_exit(void)
+{
+ return pci_unregister_driver(&mantis_pci_driver);
+}
+
+module_init(mantis_init);
+module_exit(mantis_exit);
+
+MODULE_DESCRIPTION("MANTIS driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
new file mode 100644
index 0000000..d0b645a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_common.h
@@ -0,0 +1,179 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_COMMON_H
+#define __MANTIS_COMMON_H
+
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+
+#include "mantis_uart.h"
+
+#include "mantis_link.h"
+
+#define MANTIS_ERROR 0
+#define MANTIS_NOTICE 1
+#define MANTIS_INFO 2
+#define MANTIS_DEBUG 3
+#define MANTIS_TMG 9
+
+#define dprintk(y, z, format, arg...) do { \
+ if (z) { \
+ if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \
+ printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \
+ printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \
+ printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \
+ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y)) \
+ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ } else { \
+ if (mantis->verbose > y) \
+ printk(format , ##arg); \
+ } \
+} while(0)
+
+#define mwrite(dat, addr) writel((dat), addr)
+#define mread(addr) readl(addr)
+
+#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr)))
+#define mmread(addr) mread(mantis->mmio + (addr))
+
+#define MANTIS_TS_188 0
+#define MANTIS_TS_204 1
+
+#define TWINHAN_TECHNOLOGIES 0x1822
+#define MANTIS 0x4e35
+
+#define TECHNISAT 0x1ae4
+#define TERRATEC 0x153b
+
+#define MAKE_ENTRY(__subven, __subdev, __configptr) { \
+ .vendor = TWINHAN_TECHNOLOGIES, \
+ .device = MANTIS, \
+ .subvendor = (__subven), \
+ .subdevice = (__subdev), \
+ .driver_data = (unsigned long) (__configptr) \
+}
+
+enum mantis_i2c_mode {
+ MANTIS_PAGE_MODE = 0,
+ MANTIS_BYTE_MODE,
+};
+
+struct mantis_pci;
+
+struct mantis_hwconfig {
+ char *model_name;
+ char *dev_type;
+ u32 ts_size;
+
+ enum mantis_baud baud_rate;
+ enum mantis_parity parity;
+ u32 bytes;
+
+ irqreturn_t (*irq_handler)(int irq, void *dev_id);
+ int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
+
+ u8 power;
+ u8 reset;
+
+ enum mantis_i2c_mode i2c_mode;
+};
+
+struct mantis_pci {
+ unsigned int verbose;
+
+ /* PCI stuff */
+ u16 vendor_id;
+ u16 device_id;
+ u16 subsystem_vendor;
+ u16 subsystem_device;
+
+ u8 latency;
+
+ struct pci_dev *pdev;
+
+ unsigned long mantis_addr;
+ void __iomem *mmio;
+
+ u8 irq;
+ u8 revision;
+
+ unsigned int num;
+
+ /* RISC Core */
+ u32 finished_block;
+ u32 last_block;
+ u32 line_bytes;
+ u32 line_count;
+ u32 risc_pos;
+ u8 *buf_cpu;
+ dma_addr_t buf_dma;
+ u32 *risc_cpu;
+ dma_addr_t risc_dma;
+
+ struct tasklet_struct tasklet;
+
+ struct i2c_adapter adapter;
+ int i2c_rc;
+ wait_queue_head_t i2c_wq;
+ struct mutex i2c_lock;
+
+ /* DVB stuff */
+ struct dvb_adapter dvb_adapter;
+ struct dvb_frontend *fe;
+ struct dvb_demux demux;
+ struct dmxdev dmxdev;
+ struct dmx_frontend fe_hw;
+ struct dmx_frontend fe_mem;
+ struct dvb_net dvbnet;
+
+ u8 feeds;
+
+ struct mantis_hwconfig *hwconfig;
+
+ u32 mantis_int_stat;
+ u32 mantis_int_mask;
+
+ /* board specific */
+ u8 mac_address[8];
+ u32 sub_vendor_id;
+ u32 sub_device_id;
+
+ /* A12 A13 A14 */
+ u32 gpio_status;
+
+ u32 gpif_status;
+
+ struct mantis_ca *mantis_ca;
+
+ wait_queue_head_t uart_wq;
+ struct work_struct uart_work;
+ spinlock_t uart_lock;
+
+ struct input_dev *rc;
+};
+
+#define MANTIS_HIF_STATUS (mantis->gpio_status)
+
+#endif /* __MANTIS_COMMON_H */
diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c
new file mode 100644
index 0000000..8113b23
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_core.c
@@ -0,0 +1,238 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "mantis_common.h"
+#include "mantis_core.h"
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+ int err;
+ struct i2c_msg msg[] = {
+ {
+ .addr = 0x50,
+ .flags = 0,
+ .buf = data,
+ .len = 1
+ }, {
+ .addr = 0x50,
+ .flags = I2C_M_RD,
+ .buf = data,
+ .len = length
+ },
+ };
+
+ err = i2c_transfer(&mantis->adapter, msg, 2);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1,
+ "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+ err, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+
+static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+ int err;
+
+ struct i2c_msg msg = {
+ .addr = 0x50,
+ .flags = 0,
+ .buf = data,
+ .len = length
+ };
+
+ err = i2c_transfer(&mantis->adapter, &msg, 1);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1,
+ "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >",
+ err, length, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+
+static int get_mac_address(struct mantis_pci *mantis)
+{
+ int err;
+
+ mantis->mac_address[0] = 0x08;
+ err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error");
+
+ return err;
+ }
+ dprintk(verbose, MANTIS_ERROR, 0,
+ " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n",
+ mantis->mac_address[0], mantis->mac_address[1],
+ mantis->mac_address[2], mantis->mac_address[3],
+ mantis->mac_address[4], mantis->mac_address[5]);
+
+ return 0;
+}
+
+#define MANTIS_MODEL_UNKNOWN "UNKNOWN"
+#define MANTIS_DEV_UNKNOWN "UNKNOWN"
+
+struct mantis_hwconfig unknown_device = {
+ .model_name = MANTIS_MODEL_UNKNOWN,
+ .dev_type = MANTIS_DEV_UNKNOWN,
+};
+
+static void mantis_load_config(struct mantis_pci *mantis)
+{
+ switch (mantis->subsystem_device) {
+ case MANTIS_VP_1033_DVB_S: /* VP-1033 */
+ mantis->hwconfig = &vp1033_mantis_config;
+ break;
+ case MANTIS_VP_1034_DVB_S: /* VP-1034 */
+ mantis->hwconfig = &vp1034_mantis_config;
+ break;
+ case MANTIS_VP_1041_DVB_S2: /* VP-1041 */
+ case TECHNISAT_SKYSTAR_HD2:
+ mantis->hwconfig = &vp1041_mantis_config;
+ break;
+ case MANTIS_VP_2033_DVB_C: /* VP-2033 */
+ mantis->hwconfig = &vp2033_mantis_config;
+ break;
+ case MANTIS_VP_2040_DVB_C: /* VP-2040 */
+ case TERRATEC_CINERGY_C_PCI: /* VP-2040 clone */
+ case TECHNISAT_CABLESTAR_HD2:
+ mantis->hwconfig = &vp2040_mantis_config;
+ break;
+ case MANTIS_VP_3030_DVB_T: /* VP-3030 */
+ mantis->hwconfig = &vp3030_mantis_config;
+ break;
+ default:
+ mantis->hwconfig = &unknown_device;
+ break;
+ }
+}
+
+int mantis_core_init(struct mantis_pci *mantis)
+{
+ int err = 0;
+
+ mantis_load_config(mantis);
+ dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+ mantis->hwconfig->model_name, mantis->hwconfig->dev_type,
+ mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), PCI_FUNC(mantis->pdev->devfn));
+ dprintk(verbose, MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ",
+ mantis->revision,
+ mantis->subsystem_vendor, mantis->subsystem_device);
+ dprintk(verbose, MANTIS_ERROR, 0,
+ "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n",
+ mantis->pdev->irq, mantis->latency,
+ mantis->mantis_addr, mantis->mantis_mmio);
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed");
+ return err;
+ }
+ err = get_mac_address(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed");
+ return err;
+ }
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed");
+ return err;
+ }
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed");
+ return err;
+ }
+ err = mantis_uart_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed");
+ return err;
+ }
+
+ return 0;
+}
+
+int mantis_core_exit(struct mantis_pci *mantis)
+{
+ mantis_dma_stop(mantis);
+ dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping");
+
+ mantis_uart_exit(mantis);
+ dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed");
+
+ if (mantis_dma_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed");
+ if (mantis_dvb_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed");
+ if (mantis_i2c_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. failed");
+
+ return 0;
+}
+
+/* Turn the given bit on or off. */
+void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+ u32 cur;
+
+ cur = mmread(MANTIS_GPIF_ADDR);
+ if (value)
+ mantis->gpio_status = cur | (1 << bitpos);
+ else
+ mantis->gpio_status = cur & (~(1 << bitpos));
+
+ mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+ udelay(100);
+}
+
+/* direction = 0 , no CI passthrough ; 1 , CI passthrough */
+void mantis_set_direction(struct mantis_pci *mantis, int direction)
+{
+ u32 reg;
+
+ reg = mmread(0x28);
+ dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup");
+ if (direction == 0x01) {
+ /* to CI */
+ reg |= 0x04;
+ mmwrite(reg, 0x28);
+ reg &= 0xff - 0x04;
+ mmwrite(reg, 0x28);
+ } else {
+ reg &= 0xff - 0x04;
+ mmwrite(reg, 0x28);
+ reg |= 0x04;
+ mmwrite(reg, 0x28);
+ }
+}
diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/dvb/mantis/mantis_core.h
new file mode 100644
index 0000000..833ee42
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_core.h
@@ -0,0 +1,57 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_CORE_H
+#define __MANTIS_CORE_H
+
+#include "mantis_common.h"
+
+
+#define FE_TYPE_SAT 0
+#define FE_TYPE_CAB 1
+#define FE_TYPE_TER 2
+
+#define FE_TYPE_TS204 0
+#define FE_TYPE_TS188 1
+
+
+struct vendorname {
+ u8 *sub_vendor_name;
+ u32 sub_vendor_id;
+};
+
+struct devicetype {
+ u8 *sub_device_name;
+ u32 sub_device_id;
+ u8 device_type;
+ u32 type_flags;
+};
+
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+extern int mantis_core_init(struct mantis_pci *mantis);
+extern int mantis_core_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CORE_H */
diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c
new file mode 100644
index 0000000..46202a4
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dma.c
@@ -0,0 +1,256 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#include <linux/vmalloc.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_dma.h"
+
+#define RISC_WRITE (0x01 << 28)
+#define RISC_JUMP (0x07 << 28)
+#define RISC_IRQ (0x01 << 24)
+
+#define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16))
+#define RISC_FLUSH() (mantis->risc_pos = 0)
+#define RISC_INSTR(opcode) (mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode))
+
+#define MANTIS_BUF_SIZE (64 * 1024)
+#define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE >> 4)
+#define MANTIS_BLOCK_COUNT (1 << 4)
+#define MANTIS_RISC_SIZE PAGE_SIZE
+
+int mantis_dma_exit(struct mantis_pci *mantis)
+{
+ if (mantis->buf_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "DMA=0x%lx cpu=0x%p size=%d",
+ (unsigned long) mantis->buf_dma,
+ mantis->buf_cpu,
+ MANTIS_BUF_SIZE);
+
+ pci_free_consistent(mantis->pdev, MANTIS_BUF_SIZE,
+ mantis->buf_cpu, mantis->buf_dma);
+
+ mantis->buf_cpu = NULL;
+ }
+ if (mantis->risc_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "RISC=0x%lx cpu=0x%p size=%lx",
+ (unsigned long) mantis->risc_dma,
+ mantis->risc_cpu,
+ MANTIS_RISC_SIZE);
+
+ pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE,
+ mantis->risc_cpu, mantis->risc_dma);
+
+ mantis->risc_cpu = NULL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_dma_exit);
+
+static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
+{
+ if (!mantis->buf_cpu) {
+ mantis->buf_cpu = pci_alloc_consistent(mantis->pdev,
+ MANTIS_BUF_SIZE,
+ &mantis->buf_dma);
+ if (!mantis->buf_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "DMA buffer allocation failed");
+
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1,
+ "DMA=0x%lx cpu=0x%p size=%d",
+ (unsigned long) mantis->buf_dma,
+ mantis->buf_cpu, MANTIS_BUF_SIZE);
+ }
+ if (!mantis->risc_cpu) {
+ mantis->risc_cpu = pci_alloc_consistent(mantis->pdev,
+ MANTIS_RISC_SIZE,
+ &mantis->risc_dma);
+
+ if (!mantis->risc_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "RISC program allocation failed");
+
+ mantis_dma_exit(mantis);
+
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1,
+ "RISC=0x%lx cpu=0x%p size=%lx",
+ (unsigned long) mantis->risc_dma,
+ mantis->risc_cpu, MANTIS_RISC_SIZE);
+ }
+
+ return 0;
+err:
+ dprintk(MANTIS_ERROR, 1, "Out of memory (?) .....");
+ return -ENOMEM;
+}
+
+static inline int mantis_calc_lines(struct mantis_pci *mantis)
+{
+ mantis->line_bytes = MANTIS_BLOCK_BYTES;
+ mantis->line_count = MANTIS_BLOCK_COUNT;
+
+ while (mantis->line_bytes > 4095) {
+ mantis->line_bytes >>= 1;
+ mantis->line_count <<= 1;
+ }
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]",
+ MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count);
+
+ if (mantis->line_count > 255) {
+ dprintk(MANTIS_ERROR, 1, "Buffer size error");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int mantis_dma_init(struct mantis_pci *mantis)
+{
+ int err = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DMA init");
+ if (mantis_alloc_buffers(mantis) < 0) {
+ dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer");
+
+ /* Stop RISC Engine */
+ mmwrite(0, MANTIS_DMA_CTL);
+
+ goto err;
+ }
+ err = mantis_calc_lines(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed");
+
+ goto err;
+ }
+
+ return 0;
+err:
+ return err;
+}
+EXPORT_SYMBOL_GPL(mantis_dma_init);
+
+static inline void mantis_risc_program(struct mantis_pci *mantis)
+{
+ u32 buf_pos = 0;
+ u32 line;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program");
+ RISC_FLUSH();
+
+ dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u",
+ mantis->line_count, mantis->line_bytes);
+
+ for (line = 0; line < mantis->line_count; line++) {
+ dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line);
+ if (!(buf_pos % MANTIS_BLOCK_BYTES)) {
+ RISC_INSTR(RISC_WRITE |
+ RISC_IRQ |
+ RISC_STATUS(((buf_pos / MANTIS_BLOCK_BYTES) +
+ (MANTIS_BLOCK_COUNT - 1)) %
+ MANTIS_BLOCK_COUNT) |
+ mantis->line_bytes);
+ } else {
+ RISC_INSTR(RISC_WRITE | mantis->line_bytes);
+ }
+ RISC_INSTR(mantis->buf_dma + buf_pos);
+ buf_pos += mantis->line_bytes;
+ }
+ RISC_INSTR(RISC_JUMP);
+ RISC_INSTR(mantis->risc_dma);
+}
+
+void mantis_dma_start(struct mantis_pci *mantis)
+{
+ dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine");
+
+ mantis_risc_program(mantis);
+ mmwrite(mantis->risc_dma, MANTIS_RISC_START);
+ mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ mmwrite(0, MANTIS_DMA_CTL);
+ mantis->last_block = mantis->finished_block = 0;
+
+ mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK);
+
+ mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN
+ | MANTIS_RISC_EN, MANTIS_DMA_CTL);
+
+}
+
+void mantis_dma_stop(struct mantis_pci *mantis)
+{
+ u32 stat = 0, mask = 0;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
+
+ mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR);
+
+ mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN |
+ MANTIS_DCAP_EN |
+ MANTIS_RISC_EN)), MANTIS_DMA_CTL);
+
+ mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT);
+
+ mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI |
+ MANTIS_INT_RISCEN), MANTIS_INT_MASK);
+}
+
+
+void mantis_dma_xfer(unsigned long data)
+{
+ struct mantis_pci *mantis = (struct mantis_pci *) data;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ while (mantis->last_block != mantis->finished_block) {
+ dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
+ mantis->last_block, mantis->finished_block);
+
+ (config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
+ (&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES);
+ mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT;
+ }
+}
diff --git a/drivers/media/dvb/mantis/mantis_dma.h b/drivers/media/dvb/mantis/mantis_dma.h
new file mode 100644
index 0000000..6be00fa
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dma.h
@@ -0,0 +1,30 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_DMA_H
+#define __MANTIS_DMA_H
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern void mantis_dma_xfer(unsigned long data);
+
+#endif /* __MANTIS_DMA_H */
diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c
new file mode 100644
index 0000000..99d82ee
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dvb.c
@@ -0,0 +1,296 @@
+/*
+ Mantis PCI bridge driver
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ switch (power) {
+ case POWER_ON:
+ dprintk(MANTIS_DEBUG, 1, "Power ON");
+ gpio_set_bits(mantis, config->power, POWER_ON);
+ msleep(100);
+ gpio_set_bits(mantis, config->power, POWER_ON);
+ msleep(100);
+ break;
+
+ case POWER_OFF:
+ dprintk(MANTIS_DEBUG, 1, "Power OFF");
+ gpio_set_bits(mantis, config->power, POWER_OFF);
+ msleep(100);
+ break;
+
+ default:
+ dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_power);
+
+void mantis_frontend_soft_reset(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+ msleep(100);
+
+ return;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset);
+
+static int mantis_frontend_shutdown(struct mantis_pci *mantis)
+{
+ int err;
+
+ mantis_frontend_soft_reset(mantis);
+ err = mantis_frontend_power(mantis, POWER_OFF);
+ if (err != 0) {
+ dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct mantis_pci *mantis = dvbdmx->priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed");
+ if (!dvbdmx->dmx.frontend) {
+ dprintk(MANTIS_DEBUG, 1, "no frontend ?");
+ return -EINVAL;
+ }
+
+ mantis->feeds++;
+ dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d", mantis->feeds);
+
+ if (mantis->feeds == 1) {
+ dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma");
+ mantis_dma_start(mantis);
+ }
+
+ return mantis->feeds;
+}
+
+static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct mantis_pci *mantis = dvbdmx->priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed");
+ if (!dvbdmx->dmx.frontend) {
+ dprintk(MANTIS_DEBUG, 1, "no frontend ?");
+ return -EINVAL;
+ }
+
+ mantis->feeds--;
+ if (mantis->feeds == 0) {
+ dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma");
+ mantis_dma_stop(mantis);
+ }
+
+ return 0;
+}
+
+int __devinit mantis_dvb_init(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int result = -1;
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter");
+
+ result = dvb_register_adapter(&mantis->dvb_adapter,
+ "Mantis DVB adapter",
+ THIS_MODULE,
+ &mantis->pdev->dev,
+ adapter_nr);
+
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "Error registering adapter");
+ return -ENODEV;
+ }
+
+ mantis->dvb_adapter.priv = mantis;
+ mantis->demux.dmx.capabilities = DMX_TS_FILTERING |
+ DMX_SECTION_FILTERING |
+ DMX_MEMORY_BASED_FILTERING;
+
+ mantis->demux.priv = mantis;
+ mantis->demux.filternum = 256;
+ mantis->demux.feednum = 256;
+ mantis->demux.start_feed = mantis_dvb_start_feed;
+ mantis->demux.stop_feed = mantis_dvb_stop_feed;
+ mantis->demux.write_to_decoder = NULL;
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init");
+ result = dvb_dmx_init(&mantis->demux);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+
+ goto err0;
+ }
+
+ mantis->dmxdev.filternum = 256;
+ mantis->dmxdev.demux = &mantis->demux.dmx;
+ mantis->dmxdev.capabilities = 0;
+ dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init");
+
+ result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter);
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result);
+ goto err1;
+ }
+
+ mantis->fe_hw.source = DMX_FRONTEND_0;
+ result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err2;
+ }
+
+ mantis->fe_mem.source = DMX_MEMORY_FE;
+ result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err3;
+ }
+
+ result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err4;
+ }
+
+ dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx);
+ tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis);
+ if (mantis->hwconfig) {
+ result = config->frontend_init(mantis, mantis->fe);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!");
+ goto err5;
+ } else {
+ if (mantis->fe == NULL) {
+ dprintk(MANTIS_ERROR, 1, "FE <NULL>");
+ goto err5;
+ }
+
+ if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed");
+
+ if (mantis->fe->ops.release)
+ mantis->fe->ops.release(mantis->fe);
+
+ mantis->fe = NULL;
+ goto err5;
+ }
+ }
+ }
+
+ return 0;
+
+ /* Error conditions .. */
+err5:
+ tasklet_kill(&mantis->tasklet);
+ dvb_net_release(&mantis->dvbnet);
+ dvb_unregister_frontend(mantis->fe);
+ dvb_frontend_detach(mantis->fe);
+err4:
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+
+err3:
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+
+err2:
+ dvb_dmxdev_release(&mantis->dmxdev);
+
+err1:
+ dvb_dmx_release(&mantis->demux);
+
+err0:
+ dvb_unregister_adapter(&mantis->dvb_adapter);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(mantis_dvb_init);
+
+int __devexit mantis_dvb_exit(struct mantis_pci *mantis)
+{
+ int err;
+
+ if (mantis->fe) {
+ /* mantis_ca_exit(mantis); */
+ err = mantis_frontend_shutdown(mantis);
+ if (err != 0)
+ dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err);
+ dvb_unregister_frontend(mantis->fe);
+ dvb_frontend_detach(mantis->fe);
+ }
+
+ tasklet_kill(&mantis->tasklet);
+ dvb_net_release(&mantis->dvbnet);
+
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+
+ dvb_dmxdev_release(&mantis->dmxdev);
+ dvb_dmx_release(&mantis->demux);
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter");
+ dvb_unregister_adapter(&mantis->dvb_adapter);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_dvb_exit);
diff --git a/drivers/media/dvb/mantis/mantis_dvb.h b/drivers/media/dvb/mantis/mantis_dvb.h
new file mode 100644
index 0000000..464199d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dvb.h
@@ -0,0 +1,35 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_DVB_H
+#define __MANTIS_DVB_H
+
+enum mantis_power {
+ POWER_OFF = 0,
+ POWER_ON = 1
+};
+
+extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power);
+extern void mantis_frontend_soft_reset(struct mantis_pci *mantis);
+
+extern int mantis_dvb_init(struct mantis_pci *mantis);
+extern int mantis_dvb_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_DVB_H */
diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c
new file mode 100644
index 0000000..a7b369a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_evm.c
@@ -0,0 +1,117 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h"
+#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+static void mantis_hifevm_work(struct work_struct *work)
+{
+ struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work);
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_stat, gpif_mask;
+
+ gpif_stat = mmread(MANTIS_GPIF_STATUS);
+ gpif_mask = mmread(MANTIS_GPIF_IRQCFG);
+
+ if (gpif_stat & MANTIS_GPIF_DETSTAT) {
+ if (gpif_stat & MANTIS_CARD_PLUGIN) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num);
+ mmwrite(0xdada0000, MANTIS_CARD_RESET);
+ mantis_event_cam_plugin(ca);
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_INSERTED);
+ }
+ } else {
+ if (gpif_stat & MANTIS_CARD_PLUGOUT) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num);
+ mmwrite(0xdada0000, MANTIS_CARD_RESET);
+ mantis_event_cam_unplug(ca);
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_REMOVED);
+ }
+ }
+
+ if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num);
+
+ if (mantis->gpif_status & MANTIS_SBUF_WSTO)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num);
+
+ if (mantis->gpif_status & MANTIS_GPIF_OTHERR)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_OVFLW)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num);
+
+ if (gpif_stat & MANTIS_GPIF_BRRDY)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num);
+
+ if (gpif_stat & MANTIS_GPIF_INTSTAT)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_EMPTY)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_OPDONE) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num);
+ ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL;
+ ca->hif_event = MANTIS_SBUF_OPDONE;
+ wake_up(&ca->hif_opdone_wq);
+ }
+}
+
+int mantis_evmgr_init(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager");
+ INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work);
+ mantis_pcmcia_init(ca);
+ schedule_work(&ca->hif_evm_work);
+ mantis_hif_init(ca);
+ return 0;
+}
+
+void mantis_evmgr_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
+ flush_scheduled_work();
+ mantis_hif_exit(ca);
+ mantis_pcmcia_exit(ca);
+}
diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c
new file mode 100644
index 0000000..7477dac
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_hif.c
@@ -0,0 +1,240 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_hif.h"
+#include "mantis_link.h" /* temporary due to physical layer stuff */
+
+#include "mantis_reg.h"
+
+
+static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ int rc = 0;
+
+ if (wait_event_timeout(ca->hif_opdone_wq,
+ ca->hif_event & MANTIS_SBUF_OPDONE,
+ msecs_to_jiffies(500)) == -ERESTARTSYS) {
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num);
+ rc = -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete");
+ ca->hif_event &= ~MANTIS_SBUF_OPDONE;
+ return rc;
+}
+
+static int mantis_hif_write_wait(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 opdone = 0, timeout = 0;
+ int rc = 0;
+
+ if (wait_event_timeout(ca->hif_write_wq,
+ mantis->gpif_status & MANTIS_GPIF_WRACK,
+ msecs_to_jiffies(500)) == -ERESTARTSYS) {
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num);
+ rc = -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Write Acknowledged");
+ mantis->gpif_status &= ~MANTIS_GPIF_WRACK;
+ while (!opdone) {
+ opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE);
+ udelay(500);
+ timeout++;
+ if (timeout > 100) {
+ dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num);
+ rc = -ETIMEDOUT;
+ break;
+ }
+ }
+ dprintk(MANTIS_DEBUG, 1, "HIF Write success");
+ return rc;
+}
+
+
+int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0, data, count = 4;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
+ mmwrite(count, MANTIS_GPIF_BRBYTES);
+ udelay(20);
+ mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ data = mmread(MANTIS_GPIF_DIN);
+ mutex_unlock(&ca->ca_lock);
+ dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data);
+ return (data >> 24) & 0xff;
+}
+
+int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data)
+{
+ struct mantis_slot *slot = ca->slot;
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */
+ mmwrite(hif_addr, MANTIS_GPIF_ADDR);
+ mmwrite(data, MANTIS_GPIF_DOUT);
+
+ if (mantis_hif_write_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr);
+ mutex_unlock(&ca->ca_lock);
+
+ return 0;
+}
+
+int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 data, hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr |= MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
+ mmwrite(1, MANTIS_GPIF_BRBYTES);
+ udelay(20);
+ mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ data = mmread(MANTIS_GPIF_DIN);
+ dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data);
+ udelay(50);
+ mutex_unlock(&ca->ca_lock);
+
+ return (u8) data;
+}
+
+int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
+ hif_addr |= MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_ADDR);
+ mmwrite(data, MANTIS_GPIF_DOUT);
+
+ if (mantis_hif_write_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr);
+ mutex_unlock(&ca->ca_lock);
+ udelay(50);
+
+ return 0;
+}
+
+int mantis_hif_init(struct mantis_ca *ca)
+{
+ struct mantis_slot *slot = ca->slot;
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 irqcfg;
+
+ slot[0].slave_cfg = 0x70773028;
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num);
+
+ mutex_lock(&ca->ca_lock);
+ irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ irqcfg = MANTIS_MASK_BRRDY |
+ MANTIS_MASK_WRACK |
+ MANTIS_MASK_EXTIRQ |
+ MANTIS_MASK_WSTO |
+ MANTIS_MASK_OTHERR |
+ MANTIS_MASK_OVFLW;
+
+ mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
+ mutex_unlock(&ca->ca_lock);
+
+ return 0;
+}
+
+void mantis_hif_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 irqcfg;
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ irqcfg &= ~MANTIS_MASK_BRRDY;
+ mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
+ mutex_unlock(&ca->ca_lock);
+}
diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/dvb/mantis/mantis_hif.h
new file mode 100644
index 0000000..9094f9e
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_hif.h
@@ -0,0 +1,29 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_HIF_H
+#define __MANTIS_HIF_H
+
+#define MANTIS_HIF_MEMRD 1
+#define MANTIS_HIF_MEMWR 2
+#define MANTIS_HIF_IOMRD 3
+#define MANTIS_HIF_IOMWR 4
+
+#endif /* __MANTIS_HIF_H */
diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c
new file mode 100644
index 0000000..7870bcf
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_i2c.c
@@ -0,0 +1,267 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <asm/io.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_i2c.h"
+
+#define TRIALS 10000
+
+static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg)
+{
+ u32 rxd, i, stat, trials;
+
+ dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ",
+ __func__, msg->addr);
+
+ for (i = 0; i < msg->len; i++) {
+ rxd = (msg->addr << 25) | (1 << 24)
+ | MANTIS_I2C_RATE_3
+ | MANTIS_I2C_STOP
+ | MANTIS_I2C_PGMODE;
+
+ if (i == (msg->len - 1))
+ rxd &= ~MANTIS_I2C_STOP;
+
+ mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
+ mmwrite(rxd, MANTIS_I2CDATA_CTL);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CRACK)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+
+ rxd = mmread(MANTIS_I2CDATA_CTL);
+ msg->buf[i] = (u8)((rxd >> 8) & 0xFF);
+ dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+ }
+ dprintk(MANTIS_INFO, 0, "]\n");
+
+ return 0;
+}
+
+static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg)
+{
+ int i;
+ u32 txd = 0, stat, trials;
+
+ dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ",
+ __func__, msg->addr);
+
+ for (i = 0; i < msg->len; i++) {
+ dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+ txd = (msg->addr << 25) | (msg->buf[i] << 8)
+ | MANTIS_I2C_RATE_3
+ | MANTIS_I2C_STOP
+ | MANTIS_I2C_PGMODE;
+
+ if (i == (msg->len - 1))
+ txd &= ~MANTIS_I2C_STOP;
+
+ mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
+ mmwrite(txd, MANTIS_I2CDATA_CTL);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CRACK)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+ }
+ dprintk(MANTIS_INFO, 0, "]\n");
+
+ return 0;
+}
+
+static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
+{
+ int ret = 0, i = 0, trials;
+ u32 stat, data, txd;
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+
+ mantis = i2c_get_adapdata(adapter);
+ BUG_ON(!mantis);
+ config = mantis->hwconfig;
+ BUG_ON(!config);
+
+ dprintk(MANTIS_DEBUG, 1, "Messages:%d", num);
+ mutex_lock(&mantis->i2c_lock);
+
+ while (i < num) {
+ /* Byte MODE */
+ if ((config->i2c_mode & MANTIS_BYTE_MODE) &&
+ ((i + 1) < num) &&
+ (msgs[i].len < 2) &&
+ (msgs[i + 1].len < 2) &&
+ (msgs[i + 1].flags & I2C_M_RD)) {
+
+ dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n");
+
+ /* Read operation */
+ txd = msgs[i].addr << 25 | (0x1 << 24)
+ | (msgs[i].buf[0] << 16)
+ | MANTIS_I2C_RATE_3;
+
+ mmwrite(txd, MANTIS_I2CDATA_CTL);
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ /* check for xfer completion */
+ if (stat & MANTIS_INT_I2CDONE) {
+ /* check xfer was acknowledged */
+ if (stat & MANTIS_INT_I2CRACK) {
+ data = mmread(MANTIS_I2CDATA_CTL);
+ msgs[i + 1].buf[0] = (data >> 8) & 0xff;
+ dprintk(MANTIS_DEBUG, 0, " Byte <%d> RXD=0x%02x [%02x]\n", 0x0, data, msgs[i + 1].buf[0]);
+ } else {
+ /* I/O error */
+ dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__);
+ ret = -EIO;
+ break;
+ }
+ } else {
+ /* I/O error */
+ dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__);
+ ret = -EIO;
+ break;
+ }
+ i += 2; /* Write/Read operation in one go */
+ }
+
+ if (i < num) {
+ if (msgs[i].flags & I2C_M_RD)
+ ret = mantis_i2c_read(mantis, &msgs[i]);
+ else
+ ret = mantis_i2c_write(mantis, &msgs[i]);
+
+ i++;
+ if (ret < 0)
+ goto bail_out;
+ }
+
+ }
+
+ mutex_unlock(&mantis->i2c_lock);
+
+ return num;
+
+bail_out:
+ mutex_unlock(&mantis->i2c_lock);
+ return ret;
+}
+
+static u32 mantis_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm mantis_algo = {
+ .master_xfer = mantis_i2c_xfer,
+ .functionality = mantis_i2c_func,
+};
+
+int __devinit mantis_i2c_init(struct mantis_pci *mantis)
+{
+ u32 intstat, intmask;
+ struct i2c_adapter *i2c_adapter = &mantis->adapter;
+ struct pci_dev *pdev = mantis->pdev;
+
+ init_waitqueue_head(&mantis->i2c_wq);
+ mutex_init(&mantis->i2c_lock);
+ strncpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name));
+ i2c_set_adapdata(i2c_adapter, mantis);
+
+ i2c_adapter->owner = THIS_MODULE;
+ i2c_adapter->class = I2C_CLASS_TV_DIGITAL;
+ i2c_adapter->algo = &mantis_algo;
+ i2c_adapter->algo_data = NULL;
+ i2c_adapter->timeout = 500;
+ i2c_adapter->retries = 3;
+ i2c_adapter->dev.parent = &pdev->dev;
+
+ mantis->i2c_rc = i2c_add_adapter(i2c_adapter);
+ if (mantis->i2c_rc < 0)
+ return mantis->i2c_rc;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing I2C ..");
+
+ intstat = mmread(MANTIS_INT_STAT);
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite(intstat, MANTIS_INT_STAT);
+ dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_i2c_init);
+
+int mantis_i2c_exit(struct mantis_pci *mantis)
+{
+ u32 intmask;
+
+ dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
+
+ dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter");
+ return i2c_del_adapter(&mantis->adapter);
+}
+EXPORT_SYMBOL_GPL(mantis_i2c_exit);
diff --git a/drivers/media/dvb/mantis/mantis_i2c.h b/drivers/media/dvb/mantis/mantis_i2c.h
new file mode 100644
index 0000000..1342df2
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_i2c.h
@@ -0,0 +1,30 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_I2C_H
+#define __MANTIS_I2C_H
+
+#define I2C_STOP (1 << 0)
+#define I2C_READ (1 << 1)
+
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_I2C_H */
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
new file mode 100644
index 0000000..6a9df77
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -0,0 +1,148 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/input.h>
+#include <media/ir-common.h>
+#include <linux/pci.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
+
+static struct ir_scancode mantis_ir_table[] = {
+ { 0x29, KEY_POWER },
+ { 0x28, KEY_FAVORITES },
+ { 0x30, KEY_TEXT },
+ { 0x17, KEY_INFO }, /* Preview */
+ { 0x23, KEY_EPG },
+ { 0x3b, KEY_F22 }, /* Record List */
+ { 0x3c, KEY_1 },
+ { 0x3e, KEY_2 },
+ { 0x39, KEY_3 },
+ { 0x36, KEY_4 },
+ { 0x22, KEY_5 },
+ { 0x20, KEY_6 },
+ { 0x32, KEY_7 },
+ { 0x26, KEY_8 },
+ { 0x24, KEY_9 },
+ { 0x2a, KEY_0 },
+
+ { 0x33, KEY_CANCEL },
+ { 0x2c, KEY_BACK },
+ { 0x15, KEY_CLEAR },
+ { 0x3f, KEY_TAB },
+ { 0x10, KEY_ENTER },
+ { 0x14, KEY_UP },
+ { 0x0d, KEY_RIGHT },
+ { 0x0e, KEY_DOWN },
+ { 0x11, KEY_LEFT },
+
+ { 0x21, KEY_VOLUMEUP },
+ { 0x35, KEY_VOLUMEDOWN },
+ { 0x3d, KEY_CHANNELDOWN },
+ { 0x3a, KEY_CHANNELUP },
+ { 0x2e, KEY_RECORD },
+ { 0x2b, KEY_PLAY },
+ { 0x13, KEY_PAUSE },
+ { 0x25, KEY_STOP },
+
+ { 0x1f, KEY_REWIND },
+ { 0x2d, KEY_FASTFORWARD },
+ { 0x1e, KEY_PREVIOUS }, /* Replay |< */
+ { 0x1d, KEY_NEXT }, /* Skip >| */
+
+ { 0x0b, KEY_CAMERA }, /* Capture */
+ { 0x0f, KEY_LANGUAGE }, /* SAP */
+ { 0x18, KEY_MODE }, /* PIP */
+ { 0x12, KEY_ZOOM }, /* Full screen */
+ { 0x1c, KEY_SUBTITLE },
+ { 0x2f, KEY_MUTE },
+ { 0x16, KEY_F20 }, /* L/R */
+ { 0x38, KEY_F21 }, /* Hibernate */
+
+ { 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */
+ { 0x31, KEY_AGAIN }, /* Recall */
+ { 0x1a, KEY_KPPLUS }, /* Zoom+ */
+ { 0x19, KEY_KPMINUS }, /* Zoom- */
+ { 0x27, KEY_RED },
+ { 0x0C, KEY_GREEN },
+ { 0x01, KEY_YELLOW },
+ { 0x00, KEY_BLUE },
+};
+
+struct ir_scancode_table ir_mantis = {
+ .scan = mantis_ir_table,
+ .size = ARRAY_SIZE(mantis_ir_table),
+};
+EXPORT_SYMBOL_GPL(ir_mantis);
+
+int mantis_input_init(struct mantis_pci *mantis)
+{
+ struct input_dev *rc;
+ struct ir_input_state rc_state;
+ char name[80], dev[80];
+ int err;
+
+ rc = input_allocate_device();
+ if (!rc) {
+ dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
+ return -ENOMEM;
+ }
+
+ sprintf(name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
+ sprintf(dev, "pci-%s/ir0", pci_name(mantis->pdev));
+
+ rc->name = name;
+ rc->phys = dev;
+
+ ir_input_init(rc, &rc_state, IR_TYPE_OTHER);
+
+ rc->id.bustype = BUS_PCI;
+ rc->id.vendor = mantis->vendor_id;
+ rc->id.product = mantis->device_id;
+ rc->id.version = 1;
+ rc->dev = mantis->pdev->dev;
+
+ err = ir_input_register(rc, &ir_mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
+ input_free_device(rc);
+ return -ENODEV;
+ }
+
+ mantis->rc = rc;
+
+ return 0;
+}
+
+int mantis_exit(struct mantis_pci *mantis)
+{
+ struct input_dev *rc = mantis->rc;
+
+ ir_input_unregister(rc);
+
+ return 0;
+}
diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c
new file mode 100644
index 0000000..de148de
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ioc.c
@@ -0,0 +1,130 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_ioc.h"
+
+static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ int err;
+ u8 buf = reg;
+
+ struct i2c_msg msg[] = {
+ { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 },
+ { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length },
+ };
+
+ err = i2c_transfer(adapter, msg, 2);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+ err, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+int mantis_get_mac(struct mantis_pci *mantis)
+{
+ int err;
+ u8 mac_addr[6] = {0};
+
+ err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err);
+
+ return err;
+ }
+
+ dprintk(MANTIS_ERROR, 0,
+ " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n",
+ mac_addr[0],
+ mac_addr[1],
+ mac_addr[2],
+ mac_addr[3],
+ mac_addr[4],
+ mac_addr[5]);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_get_mac);
+
+/* Turn the given bit on or off. */
+void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+ u32 cur;
+
+ dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value);
+ cur = mmread(MANTIS_GPIF_ADDR);
+ if (value)
+ mantis->gpio_status = cur | (1 << bitpos);
+ else
+ mantis->gpio_status = cur & (~(1 << bitpos));
+
+ dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status);
+ mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+}
+EXPORT_SYMBOL_GPL(gpio_set_bits);
+
+int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
+{
+ u32 reg;
+
+ reg = mmread(MANTIS_CONTROL);
+ switch (stream_ctl) {
+ case STREAM_TO_HIF:
+ dprintk(MANTIS_DEBUG, 1, "Set stream to HIF");
+ reg &= 0xff - MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ reg |= MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ break;
+
+ case STREAM_TO_CAM:
+ dprintk(MANTIS_DEBUG, 1, "Set stream to CAM");
+ reg |= MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ reg &= 0xff - MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ break;
+ default:
+ dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_stream_control);
diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/dvb/mantis/mantis_ioc.h
new file mode 100644
index 0000000..188fe5a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ioc.h
@@ -0,0 +1,51 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_IOC_H
+#define __MANTIS_IOC_H
+
+#define GPIF_A00 0x00
+#define GPIF_A01 0x01
+#define GPIF_A02 0x02
+#define GPIF_A03 0x03
+#define GPIF_A04 0x04
+#define GPIF_A05 0x05
+#define GPIF_A06 0x06
+#define GPIF_A07 0x07
+#define GPIF_A08 0x08
+#define GPIF_A09 0x09
+#define GPIF_A10 0x0a
+#define GPIF_A11 0x0b
+
+#define GPIF_A12 0x0c
+#define GPIF_A13 0x0d
+#define GPIF_A14 0x0e
+
+enum mantis_stream_control {
+ STREAM_TO_HIF = 0,
+ STREAM_TO_CAM
+};
+
+extern int mantis_get_mac(struct mantis_pci *mantis);
+extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
+
+extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl);
+
+#endif /* __MANTIS_IOC_H */
diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h
new file mode 100644
index 0000000..2a81477
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_link.h
@@ -0,0 +1,83 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_LINK_H
+#define __MANTIS_LINK_H
+
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include "dvb_ca_en50221.h"
+
+enum mantis_sbuf_status {
+ MANTIS_SBUF_DATA_AVAIL = 1,
+ MANTIS_SBUF_DATA_EMPTY = 2,
+ MANTIS_SBUF_DATA_OVFLW = 3
+};
+
+struct mantis_slot {
+ u32 timeout;
+ u32 slave_cfg;
+ u32 bar;
+};
+
+/* Physical layer */
+enum mantis_slot_state {
+ MODULE_INSERTED = 3,
+ MODULE_XTRACTED = 4
+};
+
+struct mantis_ca {
+ struct mantis_slot slot[4];
+
+ struct work_struct hif_evm_work;
+
+ u32 hif_event;
+ wait_queue_head_t hif_opdone_wq;
+ wait_queue_head_t hif_brrdyw_wq;
+ wait_queue_head_t hif_data_wq;
+ wait_queue_head_t hif_write_wq; /* HIF Write op */
+
+ enum mantis_sbuf_status sbuf_status;
+
+ enum mantis_slot_state slot_state;
+
+ void *ca_priv;
+
+ struct dvb_ca_en50221 en50221;
+ struct mutex ca_lock;
+};
+
+/* CA */
+extern void mantis_event_cam_plugin(struct mantis_ca *ca);
+extern void mantis_event_cam_unplug(struct mantis_ca *ca);
+extern int mantis_pcmcia_init(struct mantis_ca *ca);
+extern void mantis_pcmcia_exit(struct mantis_ca *ca);
+extern int mantis_evmgr_init(struct mantis_ca *ca);
+extern void mantis_evmgr_exit(struct mantis_ca *ca);
+
+/* HIF */
+extern int mantis_hif_init(struct mantis_ca *ca);
+extern void mantis_hif_exit(struct mantis_ca *ca);
+extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr);
+extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data);
+extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr);
+extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data);
+
+#endif /* __MANTIS_LINK_H */
diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c
new file mode 100644
index 0000000..6c7534a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_pci.c
@@ -0,0 +1,177 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_pci.h"
+
+#define DRIVER_NAME "Mantis Core"
+
+int __devinit mantis_pci_init(struct mantis_pci *mantis)
+{
+ u8 revision, latency;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ struct pci_dev *pdev = mantis->pdev;
+ int err, ret = 0;
+
+ dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+ config->model_name,
+ config->dev_type,
+ mantis->pdev->bus->number,
+ PCI_SLOT(mantis->pdev->devfn),
+ PCI_FUNC(mantis->pdev->devfn));
+
+ err = pci_enable_device(pdev);
+ if (err != 0) {
+ ret = -ENODEV;
+ dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err);
+ goto fail0;
+ }
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err != 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err);
+ ret = -ENOMEM;
+ goto fail1;
+ }
+
+ pci_set_master(pdev);
+
+ if (!request_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0),
+ DRIVER_NAME)) {
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !");
+ ret = -ENODEV;
+ goto fail1;
+ }
+
+ mantis->mmio = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+ if (!mantis->mmio) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !");
+ ret = -ENODEV;
+ goto fail2;
+ }
+
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
+ mantis->latency = latency;
+ mantis->revision = revision;
+
+ dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ",
+ mantis->revision,
+ mantis->pdev->subsystem_vendor,
+ mantis->pdev->subsystem_device);
+
+ dprintk(MANTIS_ERROR, 0,
+ "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n",
+ mantis->pdev->irq,
+ mantis->latency,
+ mantis->mantis_addr,
+ mantis->mmio);
+
+ err = request_irq(pdev->irq,
+ config->irq_handler,
+ IRQF_SHARED,
+ DRIVER_NAME,
+ mantis);
+
+ if (err != 0) {
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err);
+ ret = -ENODEV;
+ goto fail3;
+ }
+
+ pci_set_drvdata(pdev, mantis);
+ return ret;
+
+ /* Error conditions */
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret);
+ if (mantis->mmio)
+ iounmap(mantis->mmio);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret);
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret);
+ pci_disable_device(pdev);
+
+fail0:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret);
+ pci_set_drvdata(pdev, NULL);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mantis_pci_init);
+
+void mantis_pci_exit(struct mantis_pci *mantis)
+{
+ struct pci_dev *pdev = mantis->pdev;
+
+ dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio);
+ free_irq(pdev->irq, mantis);
+ if (mantis->mmio) {
+ iounmap(mantis->mmio);
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ }
+
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+EXPORT_SYMBOL_GPL(mantis_pci_exit);
+
+MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/mantis_pci.h b/drivers/media/dvb/mantis/mantis_pci.h
new file mode 100644
index 0000000..65f0045
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_pci.h
@@ -0,0 +1,27 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_PCI_H
+#define __MANTIS_PCI_H
+
+extern int mantis_pci_init(struct mantis_pci *mantis);
+extern void mantis_pci_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_PCI_H */
diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c
new file mode 100644
index 0000000..5cb545b
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_pcmcia.c
@@ -0,0 +1,120 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h" /* temporary due to physical layer stuff */
+#include "mantis_reg.h"
+
+/*
+ * If Slot state is already PLUG_IN event and we are called
+ * again, definitely it is jitter alone
+ */
+void mantis_event_cam_plugin(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_irqcfg;
+
+ if (ca->slot_state == MODULE_XTRACTED) {
+ dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
+ udelay(50);
+ mmwrite(0xda000000, MANTIS_CARD_RESET);
+ gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ gpif_irqcfg |= MANTIS_MASK_PLUGOUT;
+ gpif_irqcfg &= ~MANTIS_MASK_PLUGIN;
+ mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
+ udelay(500);
+ ca->slot_state = MODULE_INSERTED;
+ }
+ udelay(100);
+}
+
+/*
+ * If Slot state is already UN_PLUG event and we are called
+ * again, definitely it is jitter alone
+ */
+void mantis_event_cam_unplug(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_irqcfg;
+
+ if (ca->slot_state == MODULE_INSERTED) {
+ dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
+ udelay(50);
+ mmwrite(0x00da0000, MANTIS_CARD_RESET);
+ gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ gpif_irqcfg |= MANTIS_MASK_PLUGIN;
+ gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT;
+ mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
+ udelay(500);
+ ca->slot_state = MODULE_XTRACTED;
+ }
+ udelay(100);
+}
+
+int mantis_pcmcia_init(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_stat, card_stat;
+
+ mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK);
+ gpif_stat = mmread(MANTIS_GPIF_STATUS);
+ card_stat = mmread(MANTIS_GPIF_IRQCFG);
+
+ if (gpif_stat & MANTIS_GPIF_DETSTAT) {
+ dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
+ mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG);
+ ca->slot_state = MODULE_INSERTED;
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_INSERTED);
+ } else {
+ dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
+ mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG);
+ ca->slot_state = MODULE_XTRACTED;
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_REMOVED);
+ }
+
+ return 0;
+}
+
+void mantis_pcmcia_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS);
+ mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK);
+}
diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h
new file mode 100644
index 0000000..7761f9d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_reg.h
@@ -0,0 +1,197 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_REG_H
+#define __MANTIS_REG_H
+
+/* Interrupts */
+#define MANTIS_INT_STAT 0x00
+#define MANTIS_INT_MASK 0x04
+
+#define MANTIS_INT_RISCSTAT (0x0f << 28)
+#define MANTIS_INT_RISCEN (0x01 << 27)
+#define MANTIS_INT_I2CRACK (0x01 << 26)
+
+/* #define MANTIS_INT_GPIF (0xff << 12) */
+
+#define MANTIS_INT_PCMCIA7 (0x01 << 19)
+#define MANTIS_INT_PCMCIA6 (0x01 << 18)
+#define MANTIS_INT_PCMCIA5 (0x01 << 17)
+#define MANTIS_INT_PCMCIA4 (0x01 << 16)
+#define MANTIS_INT_PCMCIA3 (0x01 << 15)
+#define MANTIS_INT_PCMCIA2 (0x01 << 14)
+#define MANTIS_INT_PCMCIA1 (0x01 << 13)
+#define MANTIS_INT_PCMCIA0 (0x01 << 12)
+#define MANTIS_INT_IRQ1 (0x01 << 11)
+#define MANTIS_INT_IRQ0 (0x01 << 10)
+#define MANTIS_INT_OCERR (0x01 << 8)
+#define MANTIS_INT_PABORT (0x01 << 7)
+#define MANTIS_INT_RIPERR (0x01 << 6)
+#define MANTIS_INT_PPERR (0x01 << 5)
+#define MANTIS_INT_FTRGT (0x01 << 3)
+#define MANTIS_INT_RISCI (0x01 << 1)
+#define MANTIS_INT_I2CDONE (0x01 << 0)
+
+/* DMA */
+#define MANTIS_DMA_CTL 0x08
+#define MANTIS_GPIF_RD (0xff << 24)
+#define MANTIS_GPIF_WR (0xff << 16)
+#define MANTIS_CPU_DO (0x01 << 10)
+#define MANTIS_DRV_DO (0x01 << 9)
+#define MANTIS_I2C_RD (0x01 << 7)
+#define MANTIS_I2C_WR (0x01 << 6)
+#define MANTIS_DCAP_MODE (0x01 << 5)
+#define MANTIS_FIFO_TP_4 (0x00 << 3)
+#define MANTIS_FIFO_TP_8 (0x01 << 3)
+#define MANTIS_FIFO_TP_16 (0x02 << 3)
+#define MANTIS_FIFO_EN (0x01 << 2)
+#define MANTIS_DCAP_EN (0x01 << 1)
+#define MANTIS_RISC_EN (0x01 << 0)
+
+/* DEBUG */
+#define MANTIS_DEBUGREG 0x0c
+#define MANTIS_DATINV (0x0e << 7)
+#define MANTIS_TOP_DEBUGSEL (0x07 << 4)
+#define MANTIS_PCMCIA_DEBUGSEL (0x0f << 0)
+
+#define MANTIS_RISC_START 0x10
+#define MANTIS_RISC_PC 0x14
+
+/* I2C */
+#define MANTIS_I2CDATA_CTL 0x18
+#define MANTIS_I2C_RATE_1 (0x00 << 6)
+#define MANTIS_I2C_RATE_2 (0x01 << 6)
+#define MANTIS_I2C_RATE_3 (0x02 << 6)
+#define MANTIS_I2C_RATE_4 (0x03 << 6)
+#define MANTIS_I2C_STOP (0x01 << 5)
+#define MANTIS_I2C_PGMODE (0x01 << 3)
+
+/* DATA */
+#define MANTIS_CMD_DATA_R1 0x20
+#define MANTIS_CMD_DATA_3 (0xff << 24)
+#define MANTIS_CMD_DATA_2 (0xff << 16)
+#define MANTIS_CMD_DATA_1 (0xff << 8)
+#define MANTIS_CMD_DATA_0 (0xff << 0)
+
+#define MANTIS_CMD_DATA_R2 0x24
+#define MANTIS_CMD_DATA_7 (0xff << 24)
+#define MANTIS_CMD_DATA_6 (0xff << 16)
+#define MANTIS_CMD_DATA_5 (0xff << 8)
+#define MANTIS_CMD_DATA_4 (0xff << 0)
+
+#define MANTIS_CONTROL 0x28
+#define MANTIS_DET (0x01 << 7)
+#define MANTIS_DAT_CF_EN (0x01 << 6)
+#define MANTIS_ACS (0x03 << 4)
+#define MANTIS_VCCEN (0x01 << 3)
+#define MANTIS_BYPASS (0x01 << 2)
+#define MANTIS_MRST (0x01 << 1)
+#define MANTIS_CRST_INT (0x01 << 0)
+
+#define MANTIS_GPIF_CFGSLA 0x84
+#define MANTIS_GPIF_WAITSMPL (0x07 << 28)
+#define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25)
+#define MANTIS_GPIF_WAITPOL (0x01 << 24)
+#define MANTIS_GPIF_NCDELAY (0x07 << 20)
+#define MANTIS_GPIF_RW2CSDELAY (0x07 << 16)
+#define MANTIS_GPIF_SLFTIMEDMODE (0x01 << 15)
+#define MANTIS_GPIF_SLFTIMEDDELY (0x7f << 8)
+#define MANTIS_GPIF_DEVTYPE (0x07 << 4)
+#define MANTIS_GPIF_BIGENDIAN (0x01 << 3)
+#define MANTIS_GPIF_FETCHCMD (0x03 << 1)
+#define MANTIS_GPIF_HWORDDEV (0x01 << 0)
+
+#define MANTIS_GPIF_WSTOPER 0x90
+#define MANTIS_GPIF_WSTOPERWREN3 (0x01 << 31)
+#define MANTIS_GPIF_PARBOOTN (0x01 << 29)
+#define MANTIS_GPIF_WSTOPERSLID3 (0x1f << 24)
+#define MANTIS_GPIF_WSTOPERWREN2 (0x01 << 23)
+#define MANTIS_GPIF_WSTOPERSLID2 (0x1f << 16)
+#define MANTIS_GPIF_WSTOPERWREN1 (0x01 << 15)
+#define MANTIS_GPIF_WSTOPERSLID1 (0x1f << 8)
+#define MANTIS_GPIF_WSTOPERWREN0 (0x01 << 7)
+#define MANTIS_GPIF_WSTOPERSLID0 (0x1f << 0)
+
+#define MANTIS_GPIF_CS2RW 0x94
+#define MANTIS_GPIF_CS2RWWREN3 (0x01 << 31)
+#define MANTIS_GPIF_CS2RWDELY3 (0x3f << 24)
+#define MANTIS_GPIF_CS2RWWREN2 (0x01 << 23)
+#define MANTIS_GPIF_CS2RWDELY2 (0x3f << 16)
+#define MANTIS_GPIF_CS2RWWREN1 (0x01 << 15)
+#define MANTIS_GPIF_CS2RWDELY1 (0x3f << 8)
+#define MANTIS_GPIF_CS2RWWREN0 (0x01 << 7)
+#define MANTIS_GPIF_CS2RWDELY0 (0x3f << 0)
+
+#define MANTIS_GPIF_IRQCFG 0x98
+#define MANTIS_GPIF_IRQPOL (0x01 << 8)
+#define MANTIS_MASK_WRACK (0x01 << 7)
+#define MANTIS_MASK_BRRDY (0x01 << 6)
+#define MANTIS_MASK_OVFLW (0x01 << 5)
+#define MANTIS_MASK_OTHERR (0x01 << 4)
+#define MANTIS_MASK_WSTO (0x01 << 3)
+#define MANTIS_MASK_EXTIRQ (0x01 << 2)
+#define MANTIS_MASK_PLUGIN (0x01 << 1)
+#define MANTIS_MASK_PLUGOUT (0x01 << 0)
+
+#define MANTIS_GPIF_STATUS 0x9c
+#define MANTIS_SBUF_KILLOP (0x01 << 15)
+#define MANTIS_SBUF_OPDONE (0x01 << 14)
+#define MANTIS_SBUF_EMPTY (0x01 << 13)
+#define MANTIS_GPIF_DETSTAT (0x01 << 9)
+#define MANTIS_GPIF_INTSTAT (0x01 << 8)
+#define MANTIS_GPIF_WRACK (0x01 << 7)
+#define MANTIS_GPIF_BRRDY (0x01 << 6)
+#define MANTIS_SBUF_OVFLW (0x01 << 5)
+#define MANTIS_GPIF_OTHERR (0x01 << 4)
+#define MANTIS_SBUF_WSTO (0x01 << 3)
+#define MANTIS_GPIF_EXTIRQ (0x01 << 2)
+#define MANTIS_CARD_PLUGIN (0x01 << 1)
+#define MANTIS_CARD_PLUGOUT (0x01 << 0)
+
+#define MANTIS_GPIF_BRADDR 0xa0
+#define MANTIS_GPIF_PCMCIAREG (0x01 << 27)
+#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26)
+#define MANTIS_GPIF_BR_ADDR (0xfffffff << 0)
+
+#define MANTIS_GPIF_BRBYTES 0xa4
+#define MANTIS_GPIF_BRCNT (0xfff << 0)
+
+#define MANTIS_PCMCIA_RESET 0xa8
+#define MANTIS_PCMCIA_RSTVAL (0xff << 0)
+
+#define MANTIS_CARD_RESET 0xac
+
+#define MANTIS_GPIF_ADDR 0xb0
+#define MANTIS_GPIF_HIFRDWRN (0x01 << 31)
+#define MANTIS_GPIF_PCMCIAREG (0x01 << 27)
+#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26)
+#define MANTIS_GPIF_HIFADDR (0xfffffff << 0)
+
+#define MANTIS_GPIF_DOUT 0xb4
+#define MANTIS_GPIF_HIFDOUT (0xfffffff << 0)
+
+#define MANTIS_GPIF_DIN 0xb8
+#define MANTIS_GPIF_HIFDIN (0xfffffff << 0)
+
+#define MANTIS_GPIF_SPARE 0xbc
+#define MANTIS_GPIF_LOGICRD (0xffff << 16)
+#define MANTIS_GPIF_LOGICRW (0xffff << 0)
+
+#endif /* __MANTIS_REG_H */
diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c
new file mode 100644
index 0000000..7d2f239
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_uart.c
@@ -0,0 +1,186 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
+
+struct mantis_uart_params {
+ enum mantis_baud baud_rate;
+ enum mantis_parity parity;
+};
+
+static struct {
+ char string[7];
+} rates[5] = {
+ { "9600" },
+ { "19200" },
+ { "38400" },
+ { "57600" },
+ { "115200" }
+};
+
+static struct {
+ char string[5];
+} parity[3] = {
+ { "NONE" },
+ { "ODD" },
+ { "EVEN" }
+};
+
+#define UART_MAX_BUF 16
+
+int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ u32 stat = 0, i;
+
+ /* get data */
+ for (i = 0; i < (config->bytes + 1); i++) {
+
+ stat = mmread(MANTIS_UART_STAT);
+
+ if (stat & MANTIS_UART_RXFIFO_FULL) {
+ dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
+ }
+ data[i] = mmread(MANTIS_UART_RXD) & 0x3f;
+
+ dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
+
+ if (data[i] & (1 << 7)) {
+ dprintk(MANTIS_ERROR, 1, "UART framing error");
+ return -EINVAL;
+ }
+ if (data[i] & (1 << 6)) {
+ dprintk(MANTIS_ERROR, 1, "UART parity error");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void mantis_uart_work(struct work_struct *work)
+{
+ struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ u8 buf[16];
+ int i;
+
+ mantis_uart_read(mantis, buf);
+
+ for (i = 0; i < (config->bytes + 1); i++)
+ dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+}
+
+static int mantis_uart_setup(struct mantis_pci *mantis,
+ struct mantis_uart_params *params)
+{
+ u32 reg;
+
+ mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL);
+
+ reg = mmread(MANTIS_UART_BAUD);
+
+ switch (params->baud_rate) {
+ case MANTIS_BAUD_9600:
+ reg |= 0xd8;
+ break;
+ case MANTIS_BAUD_19200:
+ reg |= 0x6c;
+ break;
+ case MANTIS_BAUD_38400:
+ reg |= 0x36;
+ break;
+ case MANTIS_BAUD_57600:
+ reg |= 0x23;
+ break;
+ case MANTIS_BAUD_115200:
+ reg |= 0x11;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mmwrite(reg, MANTIS_UART_BAUD);
+
+ return 0;
+}
+
+int mantis_uart_init(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ struct mantis_uart_params params;
+
+ /* default parity: */
+ params.baud_rate = config->baud_rate;
+ params.parity = config->parity;
+ dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
+ rates[params.baud_rate].string,
+ parity[params.parity].string);
+
+ init_waitqueue_head(&mantis->uart_wq);
+ spin_lock_init(&mantis->uart_lock);
+
+ INIT_WORK(&mantis->uart_work, mantis_uart_work);
+
+ /* disable interrupt */
+ mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+
+ mantis_uart_setup(mantis, ¶ms);
+
+ /* default 1 byte */
+ mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD);
+
+ /* flush buffer */
+ mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);
+
+ /* enable interrupt */
+ mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
+ mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
+
+ schedule_work(&mantis->uart_work);
+ dprintk(MANTIS_DEBUG, 1, "UART succesfully initialized");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_uart_init);
+
+void mantis_uart_exit(struct mantis_pci *mantis)
+{
+ /* disable interrupt */
+ mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+}
+EXPORT_SYMBOL_GPL(mantis_uart_exit);
diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h
new file mode 100644
index 0000000..ffb62a0
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_uart.h
@@ -0,0 +1,58 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_UART_H
+#define __MANTIS_UART_H
+
+#define MANTIS_UART_CTL 0xe0
+#define MANTIS_UART_RXINT (1 << 4)
+#define MANTIS_UART_RXFLUSH (1 << 2)
+
+#define MANTIS_UART_RXD 0xe8
+#define MANTIS_UART_BAUD 0xec
+
+#define MANTIS_UART_STAT 0xf0
+#define MANTIS_UART_RXFIFO_DATA (1 << 7)
+#define MANTIS_UART_RXFIFO_EMPTY (1 << 6)
+#define MANTIS_UART_RXFIFO_FULL (1 << 3)
+#define MANTIS_UART_FRAME_ERR (1 << 2)
+#define MANTIS_UART_PARITY_ERR (1 << 1)
+#define MANTIS_UART_RXTHRESH_INT (1 << 0)
+
+enum mantis_baud {
+ MANTIS_BAUD_9600 = 0,
+ MANTIS_BAUD_19200,
+ MANTIS_BAUD_38400,
+ MANTIS_BAUD_57600,
+ MANTIS_BAUD_115200
+};
+
+enum mantis_parity {
+ MANTIS_PARITY_NONE = 0,
+ MANTIS_PARITY_EVEN,
+ MANTIS_PARITY_ODD,
+};
+
+struct mantis_pci;
+
+extern int mantis_uart_init(struct mantis_pci *mantis);
+extern void mantis_uart_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_UART_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c
new file mode 100644
index 0000000..4a723bd
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1033.c
@@ -0,0 +1,212 @@
+/*
+ Mantis VP-1033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "stv0299.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1033.h"
+#include "mantis_reg.h"
+
+u8 lgtdqcs001f_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x00,
+ 0x03, 0x00,
+ 0x04, 0x2a,
+ 0x05, 0x85,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x0c, 0x01,
+ 0x0d, 0x81,
+ 0x0e, 0x44,
+ 0x0f, 0x94,
+ 0x10, 0x3c,
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x13, 0xb5,
+ 0x14, 0x4f,
+ 0x15, 0xc9,
+ 0x16, 0x80,
+ 0x17, 0x36,
+ 0x18, 0xfb,
+ 0x19, 0xcf,
+ 0x1a, 0xbc,
+ 0x1c, 0x2b,
+ 0x1d, 0x27,
+ 0x1e, 0x00,
+ 0x1f, 0x0b,
+ 0x20, 0xa1,
+ 0x21, 0x60,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00,
+ 0x29, 0x28,
+ 0x2a, 0x14,
+ 0x2b, 0x0f,
+ 0x2c, 0x09,
+ 0x2d, 0x05,
+ 0x31, 0x1f,
+ 0x32, 0x19,
+ 0x33, 0xfc,
+ 0x34, 0x13,
+ 0xff, 0xff,
+};
+
+#define MANTIS_MODEL_NAME "VP-1033"
+#define MANTIS_DEV_TYPE "DVB-S/DSS"
+
+int lgtdqcs001f_tuner_set(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[4];
+ u32 div;
+
+
+ struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)};
+
+ div = params->frequency / 250;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x83;
+ buf[3] = 0xc0;
+
+ if (params->frequency < 1531000)
+ buf[3] |= 0x04;
+ else
+ buf[3] &= ~0x04;
+ if (i2c_transfer(adapter, &msg, 1) < 0) {
+ dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed");
+ return -EIO;
+ }
+ msleep_interruptible(100);
+
+ return 0;
+}
+
+int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) {
+ aclk = 0xb7;
+ bclk = 0x47;
+ } else if (srate < 3000000) {
+ aclk = 0xb7;
+ bclk = 0x4b;
+ } else if (srate < 7000000) {
+ aclk = 0xb7;
+ bclk = 0x4f;
+ } else if (srate < 14000000) {
+ aclk = 0xb7;
+ bclk = 0x53;
+ } else if (srate < 30000000) {
+ aclk = 0xb6;
+ bclk = 0x53;
+ } else if (srate < 45000000) {
+ aclk = 0xb4;
+ bclk = 0x51;
+ }
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, ratio & 0xf0);
+
+ return 0;
+}
+
+struct stv0299_config lgtdqcs001f_config = {
+ .demod_address = 0x68,
+ .inittab = lgtdqcs001f_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = lgtdqcs001f_set_symbol_rate,
+};
+
+static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
+ fe = stv0299_attach(&lgtdqcs001f_config, adapter);
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x",
+ lgtdqcs001f_config.demod_address);
+
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1033_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1033_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/dvb/mantis/mantis_vp1033.h
new file mode 100644
index 0000000..7daaa1b
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1033.h
@@ -0,0 +1,30 @@
+/*
+ Mantis VP-1033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1033_H
+#define __MANTIS_VP1033_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_1033_DVB_S 0x0016
+
+extern struct mantis_hwconfig vp1033_config;
+
+#endif /* __MANTIS_VP1033_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c
new file mode 100644
index 0000000..8e6ae55
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1034.c
@@ -0,0 +1,119 @@
+/*
+ Mantis VP-1034 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mb86a16.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1034.h"
+#include "mantis_reg.h"
+
+struct mb86a16_config vp1034_mb86a16_config = {
+ .demod_address = 0x08,
+ .set_voltage = vp1034_set_voltage,
+};
+
+#define MANTIS_MODEL_NAME "VP-1034"
+#define MANTIS_DEV_TYPE "DVB-S/DSS"
+
+int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
+ gpio_set_bits(mantis, 13, 1);
+ gpio_set_bits(mantis, 14, 0);
+ break;
+ case SEC_VOLTAGE_18:
+ dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
+ gpio_set_bits(mantis, 13, 1);
+ gpio_set_bits(mantis, 14, 1);
+ break;
+ case SEC_VOLTAGE_OFF:
+ dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
+ break;
+ default:
+ dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage);
+ return -EINVAL;
+ }
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+
+ return 0;
+}
+
+static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
+ fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found MB86A16 DVB-S/DSS frontend @0x%02x",
+ vp1034_mb86a16_config.demod_address);
+
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1034_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1034_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/dvb/mantis/mantis_vp1034.h
new file mode 100644
index 0000000..323f38e
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1034.h
@@ -0,0 +1,33 @@
+/*
+ Mantis VP-1034 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1034_H
+#define __MANTIS_VP1034_H
+
+#include "dvb_frontend.h"
+#include "mantis_common.h"
+
+
+#define MANTIS_VP_1034_DVB_S 0x0014
+
+extern struct mantis_hwconfig vp1034_config;
+extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+
+#endif /* __MANTIS_VP1034_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
new file mode 100644
index 0000000..515346d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1041.c
@@ -0,0 +1,358 @@
+/*
+ Mantis VP-1041 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1041.h"
+#include "stb0899_reg.h"
+#include "stb0899_drv.h"
+#include "stb0899_cfg.h"
+#include "stb6100_cfg.h"
+#include "stb6100.h"
+#include "lnbp21.h"
+
+#define MANTIS_MODEL_NAME "VP-1041"
+#define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2"
+
+static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = {
+
+ /* 0x0000000b, *//* SYSREG */
+ { STB0899_DEV_ID , 0x30 },
+ { STB0899_DISCNTRL1 , 0x32 },
+ { STB0899_DISCNTRL2 , 0x80 },
+ { STB0899_DISRX_ST0 , 0x04 },
+ { STB0899_DISRX_ST1 , 0x00 },
+ { STB0899_DISPARITY , 0x00 },
+ { STB0899_DISFIFO , 0x00 },
+ { STB0899_DISSTATUS , 0x20 },
+ { STB0899_DISF22 , 0x99 },
+ { STB0899_DISF22RX , 0xa8 },
+ /* SYSREG ? */
+ { STB0899_ACRPRESC , 0x11 },
+ { STB0899_ACRDIV1 , 0x0a },
+ { STB0899_ACRDIV2 , 0x05 },
+ { STB0899_DACR1 , 0x00 },
+ { STB0899_DACR2 , 0x00 },
+ { STB0899_OUTCFG , 0x00 },
+ { STB0899_MODECFG , 0x00 },
+ { STB0899_IRQSTATUS_3 , 0xfe },
+ { STB0899_IRQSTATUS_2 , 0x03 },
+ { STB0899_IRQSTATUS_1 , 0x7c },
+ { STB0899_IRQSTATUS_0 , 0xf4 },
+ { STB0899_IRQMSK_3 , 0xf3 },
+ { STB0899_IRQMSK_2 , 0xfc },
+ { STB0899_IRQMSK_1 , 0xff },
+ { STB0899_IRQMSK_0 , 0xff },
+ { STB0899_IRQCFG , 0x00 },
+ { STB0899_I2CCFG , 0x88 },
+ { STB0899_I2CRPT , 0x58 },
+ { STB0899_IOPVALUE5 , 0x00 },
+ { STB0899_IOPVALUE4 , 0x33 },
+ { STB0899_IOPVALUE3 , 0x6d },
+ { STB0899_IOPVALUE2 , 0x90 },
+ { STB0899_IOPVALUE1 , 0x60 },
+ { STB0899_IOPVALUE0 , 0x00 },
+ { STB0899_GPIO00CFG , 0x82 },
+ { STB0899_GPIO01CFG , 0x82 },
+ { STB0899_GPIO02CFG , 0x82 },
+ { STB0899_GPIO03CFG , 0x82 },
+ { STB0899_GPIO04CFG , 0x82 },
+ { STB0899_GPIO05CFG , 0x82 },
+ { STB0899_GPIO06CFG , 0x82 },
+ { STB0899_GPIO07CFG , 0x82 },
+ { STB0899_GPIO08CFG , 0x82 },
+ { STB0899_GPIO09CFG , 0x82 },
+ { STB0899_GPIO10CFG , 0x82 },
+ { STB0899_GPIO11CFG , 0x82 },
+ { STB0899_GPIO12CFG , 0x82 },
+ { STB0899_GPIO13CFG , 0x82 },
+ { STB0899_GPIO14CFG , 0x82 },
+ { STB0899_GPIO15CFG , 0x82 },
+ { STB0899_GPIO16CFG , 0x82 },
+ { STB0899_GPIO17CFG , 0x82 },
+ { STB0899_GPIO18CFG , 0x82 },
+ { STB0899_GPIO19CFG , 0x82 },
+ { STB0899_GPIO20CFG , 0x82 },
+ { STB0899_SDATCFG , 0xb8 },
+ { STB0899_SCLTCFG , 0xba },
+ { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */
+ { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
+ { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
+ { STB0899_DIRCLKCFG , 0x82 },
+ { STB0899_CLKOUT27CFG , 0x7e },
+ { STB0899_STDBYCFG , 0x82 },
+ { STB0899_CS0CFG , 0x82 },
+ { STB0899_CS1CFG , 0x82 },
+ { STB0899_DISEQCOCFG , 0x20 },
+ { STB0899_GPIO32CFG , 0x82 },
+ { STB0899_GPIO33CFG , 0x82 },
+ { STB0899_GPIO34CFG , 0x82 },
+ { STB0899_GPIO35CFG , 0x82 },
+ { STB0899_GPIO36CFG , 0x82 },
+ { STB0899_GPIO37CFG , 0x82 },
+ { STB0899_GPIO38CFG , 0x82 },
+ { STB0899_GPIO39CFG , 0x82 },
+ { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+ { STB0899_FILTCTRL , 0x00 },
+ { STB0899_SYSCTRL , 0x01 },
+ { STB0899_STOPCLK1 , 0x20 },
+ { STB0899_STOPCLK2 , 0x00 },
+ { STB0899_INTBUFSTATUS , 0x00 },
+ { STB0899_INTBUFCTRL , 0x0a },
+ { 0xffff , 0xff },
+};
+
+static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = {
+ { STB0899_DEMOD , 0x00 },
+ { STB0899_RCOMPC , 0xc9 },
+ { STB0899_AGC1CN , 0x01 },
+ { STB0899_AGC1REF , 0x10 },
+ { STB0899_RTC , 0x23 },
+ { STB0899_TMGCFG , 0x4e },
+ { STB0899_AGC2REF , 0x34 },
+ { STB0899_TLSR , 0x84 },
+ { STB0899_CFD , 0xf7 },
+ { STB0899_ACLC , 0x87 },
+ { STB0899_BCLC , 0x94 },
+ { STB0899_EQON , 0x41 },
+ { STB0899_LDT , 0xf1 },
+ { STB0899_LDT2 , 0xe3 },
+ { STB0899_EQUALREF , 0xb4 },
+ { STB0899_TMGRAMP , 0x10 },
+ { STB0899_TMGTHD , 0x30 },
+ { STB0899_IDCCOMP , 0xfd },
+ { STB0899_QDCCOMP , 0xff },
+ { STB0899_POWERI , 0x0c },
+ { STB0899_POWERQ , 0x0f },
+ { STB0899_RCOMP , 0x6c },
+ { STB0899_AGCIQIN , 0x80 },
+ { STB0899_AGC2I1 , 0x06 },
+ { STB0899_AGC2I2 , 0x00 },
+ { STB0899_TLIR , 0x30 },
+ { STB0899_RTF , 0x7f },
+ { STB0899_DSTATUS , 0x00 },
+ { STB0899_LDI , 0xbc },
+ { STB0899_CFRM , 0xea },
+ { STB0899_CFRL , 0x31 },
+ { STB0899_NIRM , 0x2b },
+ { STB0899_NIRL , 0x80 },
+ { STB0899_ISYMB , 0x1d },
+ { STB0899_QSYMB , 0xa6 },
+ { STB0899_SFRH , 0x2f },
+ { STB0899_SFRM , 0x68 },
+ { STB0899_SFRL , 0x40 },
+ { STB0899_SFRUPH , 0x2f },
+ { STB0899_SFRUPM , 0x68 },
+ { STB0899_SFRUPL , 0x40 },
+ { STB0899_EQUAI1 , 0x02 },
+ { STB0899_EQUAQ1 , 0xff },
+ { STB0899_EQUAI2 , 0x04 },
+ { STB0899_EQUAQ2 , 0x05 },
+ { STB0899_EQUAI3 , 0x02 },
+ { STB0899_EQUAQ3 , 0xfd },
+ { STB0899_EQUAI4 , 0x03 },
+ { STB0899_EQUAQ4 , 0x07 },
+ { STB0899_EQUAI5 , 0x08 },
+ { STB0899_EQUAQ5 , 0xf5 },
+ { STB0899_DSTATUS2 , 0x00 },
+ { STB0899_VSTATUS , 0x00 },
+ { STB0899_VERROR , 0x86 },
+ { STB0899_IQSWAP , 0x2a },
+ { STB0899_ECNT1M , 0x00 },
+ { STB0899_ECNT1L , 0x00 },
+ { STB0899_ECNT2M , 0x00 },
+ { STB0899_ECNT2L , 0x00 },
+ { STB0899_ECNT3M , 0x0a },
+ { STB0899_ECNT3L , 0xad },
+ { STB0899_FECAUTO1 , 0x06 },
+ { STB0899_FECM , 0x01 },
+ { STB0899_VTH12 , 0xb0 },
+ { STB0899_VTH23 , 0x7a },
+ { STB0899_VTH34 , 0x58 },
+ { STB0899_VTH56 , 0x38 },
+ { STB0899_VTH67 , 0x34 },
+ { STB0899_VTH78 , 0x24 },
+ { STB0899_PRVIT , 0xff },
+ { STB0899_VITSYNC , 0x19 },
+ { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+ { STB0899_TSULC , 0x42 },
+ { STB0899_RSLLC , 0x41 },
+ { STB0899_TSLPL , 0x12 },
+ { STB0899_TSCFGH , 0x0c },
+ { STB0899_TSCFGM , 0x00 },
+ { STB0899_TSCFGL , 0x00 },
+ { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */
+ { STB0899_RSSYNCDEL , 0x00 },
+ { STB0899_TSINHDELH , 0x02 },
+ { STB0899_TSINHDELM , 0x00 },
+ { STB0899_TSINHDELL , 0x00 },
+ { STB0899_TSLLSTKM , 0x1b },
+ { STB0899_TSLLSTKL , 0xb3 },
+ { STB0899_TSULSTKM , 0x00 },
+ { STB0899_TSULSTKL , 0x00 },
+ { STB0899_PCKLENUL , 0xbc },
+ { STB0899_PCKLENLL , 0xcc },
+ { STB0899_RSPCKLEN , 0xbd },
+ { STB0899_TSSTATUS , 0x90 },
+ { STB0899_ERRCTRL1 , 0xb6 },
+ { STB0899_ERRCTRL2 , 0x95 },
+ { STB0899_ERRCTRL3 , 0x8d },
+ { STB0899_DMONMSK1 , 0x27 },
+ { STB0899_DMONMSK0 , 0x03 },
+ { STB0899_DEMAPVIT , 0x5c },
+ { STB0899_PLPARM , 0x19 },
+ { STB0899_PDELCTRL , 0x48 },
+ { STB0899_PDELCTRL2 , 0x00 },
+ { STB0899_BBHCTRL1 , 0x00 },
+ { STB0899_BBHCTRL2 , 0x00 },
+ { STB0899_HYSTTHRESH , 0x77 },
+ { STB0899_MATCSTM , 0x00 },
+ { STB0899_MATCSTL , 0x00 },
+ { STB0899_UPLCSTM , 0x00 },
+ { STB0899_UPLCSTL , 0x00 },
+ { STB0899_DFLCSTM , 0x00 },
+ { STB0899_DFLCSTL , 0x00 },
+ { STB0899_SYNCCST , 0x00 },
+ { STB0899_SYNCDCSTM , 0x00 },
+ { STB0899_SYNCDCSTL , 0x00 },
+ { STB0899_ISI_ENTRY , 0x00 },
+ { STB0899_ISI_BIT_EN , 0x00 },
+ { STB0899_MATSTRM , 0xf0 },
+ { STB0899_MATSTRL , 0x02 },
+ { STB0899_UPLSTRM , 0x45 },
+ { STB0899_UPLSTRL , 0x60 },
+ { STB0899_DFLSTRM , 0xe3 },
+ { STB0899_DFLSTRL , 0x00 },
+ { STB0899_SYNCSTR , 0x47 },
+ { STB0899_SYNCDSTRM , 0x05 },
+ { STB0899_SYNCDSTRL , 0x18 },
+ { STB0899_CFGPDELSTATUS1 , 0x19 },
+ { STB0899_CFGPDELSTATUS2 , 0x2b },
+ { STB0899_BBFERRORM , 0x00 },
+ { STB0899_BBFERRORL , 0x01 },
+ { STB0899_UPKTERRORM , 0x00 },
+ { STB0899_UPKTERRORL , 0x00 },
+ { 0xffff , 0xff },
+};
+
+struct stb0899_config vp1041_stb0899_config = {
+ .init_dev = vp1041_stb0899_s1_init_1,
+ .init_s2_demod = stb0899_s2_init_2,
+ .init_s1_demod = vp1041_stb0899_s1_init_3,
+ .init_s2_fec = stb0899_s2_init_4,
+ .init_tst = stb0899_s1_init_5,
+
+ .demod_address = 0x68, /* 0xd0 >> 1 */
+
+ .xtal_freq = 27000000,
+ .inversion = IQ_SWAP_ON, /* 1 */
+
+ .lo_clk = 76500000,
+ .hi_clk = 99000000,
+
+ .esno_ave = STB0899_DVBS2_ESNO_AVE,
+ .esno_quant = STB0899_DVBS2_ESNO_QUANT,
+ .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
+ .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
+ .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
+ .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+ .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+ .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
+ .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+ .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
+ .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+ .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
+ .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
+
+ .tuner_get_frequency = stb6100_get_frequency,
+ .tuner_set_frequency = stb6100_set_frequency,
+ .tuner_set_bandwidth = stb6100_set_bandwidth,
+ .tuner_get_bandwidth = stb6100_get_bandwidth,
+ .tuner_set_rfsiggain = NULL,
+};
+
+struct stb6100_config vp1041_stb6100_config = {
+ .tuner_address = 0x60,
+ .refclock = 27000000,
+};
+
+static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+ mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter);
+ if (mantis->fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
+ vp1041_stb0899_config.demod_address);
+
+ if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) {
+ if (!lnbp21_attach(mantis->fe, adapter, 0, 0))
+ dprintk(MANTIS_ERROR, 1, "No LNBP21 found!");
+ }
+ } else {
+ return -EREMOTEIO;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+
+
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1041_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1041_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.h b/drivers/media/dvb/mantis/mantis_vp1041.h
new file mode 100644
index 0000000..1ae5b3d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1041.h
@@ -0,0 +1,33 @@
+/*
+ Mantis VP-1041 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1041_H
+#define __MANTIS_VP1041_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_1041_DVB_S2 0x0031
+#define SKYSTAR_HD2_10 0x0001
+#define SKYSTAR_HD2_20 0x0003
+#define CINERGY_S2_PCI_HD 0x1179
+
+extern struct mantis_hwconfig vp1041_config;
+
+#endif /* __MANTIS_VP1041_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c
new file mode 100644
index 0000000..10ce817
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2033.c
@@ -0,0 +1,187 @@
+/*
+ Mantis VP-2033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp2033.h"
+
+#define MANTIS_MODEL_NAME "VP-2033"
+#define MANTIS_DEV_TYPE "DVB-C"
+
+struct tda1002x_config vp2033_tda1002x_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+struct tda10023_config vp2033_tda10023_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = {
+ {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+ {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+ };
+
+ if ((i2c_transfer(adapter, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[6];
+ struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
+ int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+ u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0xce;
+ buf[3] = (params->frequency < 150000000 ? 0x01 :
+ params->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+ fe = tda10021_attach(&vp2033_tda1002x_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+ vp2033_tda1002x_cu1216_config.demod_address);
+ } else {
+ fe = tda10023_attach(&vp2033_tda10023_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+ vp2033_tda1002x_cu1216_config.demod_address);
+ }
+ }
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+
+ mantis->fe = fe;
+ dprintk(MANTIS_DEBUG, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp2033_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp2033_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h
new file mode 100644
index 0000000..c55242b
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2033.h
@@ -0,0 +1,30 @@
+/*
+ Mantis VP-2033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP2033_H
+#define __MANTIS_VP2033_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_2033_DVB_C 0x0008
+
+extern struct mantis_hwconfig vp2033_config;
+
+#endif /* __MANTIS_VP2033_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c
new file mode 100644
index 0000000..a7ca233e8
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2040.c
@@ -0,0 +1,186 @@
+/*
+ Mantis VP-2040 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp2040.h"
+
+#define MANTIS_MODEL_NAME "VP-2040"
+#define MANTIS_DEV_TYPE "DVB-C"
+
+struct tda1002x_config vp2040_tda1002x_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+struct tda10023_config vp2040_tda10023_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[6];
+ struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
+ int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+ u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0xce;
+ buf[3] = (params->frequency < 150000000 ? 0x01 :
+ params->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = {
+ {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+ {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+ };
+
+ if ((i2c_transfer(adapter, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+ fe = tda10021_attach(&vp2040_tda1002x_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+ vp2040_tda1002x_cu1216_config.demod_address);
+ } else {
+ fe = tda10023_attach(&vp2040_tda10023_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+ vp2040_tda1002x_cu1216_config.demod_address);
+ }
+ }
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_DEBUG, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp2040_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp2040_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h
new file mode 100644
index 0000000..d125e21
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2040.h
@@ -0,0 +1,32 @@
+/*
+ Mantis VP-2040 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP2040_H
+#define __MANTIS_VP2040_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_2040_DVB_C 0x0043
+#define CINERGY_C 0x1178
+#define CABLESTAR_HD2 0x0002
+
+extern struct mantis_hwconfig vp2040_config;
+
+#endif /* __MANTIS_VP2040_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp3028.c b/drivers/media/dvb/mantis/mantis_vp3028.c
new file mode 100644
index 0000000..4155c83
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3028.c
@@ -0,0 +1,38 @@
+/*
+ Mantis VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "mantis_common.h"
+#include "mantis_vp3028.h"
+
+struct zl10353_config mantis_vp3028_config = {
+ .demod_address = 0x0f,
+};
+
+#define MANTIS_MODEL_NAME "VP-3028"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+struct mantis_hwconfig vp3028_mantis_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp3028.h b/drivers/media/dvb/mantis/mantis_vp3028.h
new file mode 100644
index 0000000..b07be6a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3028.h
@@ -0,0 +1,33 @@
+/*
+ Mantis VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "dvb_frontend.h"
+#include "mantis_common.h"
+#include "zl10353.h"
+
+#define MANTIS_VP_3028_DVB_T 0x0028
+
+extern struct zl10353_config mantis_vp3028_config;
+extern struct mantis_hwconfig vp3028_mantis_config;
+
+#endif /* __MANTIS_VP3028_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c
new file mode 100644
index 0000000..1f43342
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3030.c
@@ -0,0 +1,105 @@
+/*
+ Mantis VP-3030 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "tda665x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp3030.h"
+
+struct zl10353_config mantis_vp3030_config = {
+ .demod_address = 0x0f,
+};
+
+struct tda665x_config env57h12d5_config = {
+ .name = "ENV57H12D5 (ET-50DT)",
+ .addr = 0x60,
+ .frequency_min = 47000000,
+ .frequency_max = 862000000,
+ .frequency_offst = 3616667,
+ .ref_multiplier = 6, /* 1/6 MHz */
+ .ref_divider = 100000, /* 1/6 MHz */
+};
+
+#define MANTIS_MODEL_NAME "VP-3030"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+
+static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int err = 0;
+
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ err = mantis_frontend_power(mantis, POWER_ON);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+
+ if (err == 0) {
+ msleep(250);
+ dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+ fe = zl10353_attach(&mantis_vp3030_config, adapter);
+
+ if (!fe)
+ return -1;
+
+ tda665x_attach(fe, &env57h12d5_config, adapter);
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp3030_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp3030_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+
+ .i2c_mode = MANTIS_BYTE_MODE
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/dvb/mantis/mantis_vp3030.h
new file mode 100644
index 0000000..5f12c42
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3030.h
@@ -0,0 +1,30 @@
+/*
+ Mantis VP-3030 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3030_H
+#define __MANTIS_VP3030_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3030_DVB_T 0x0024
+
+extern struct mantis_hwconfig vp3030_config;
+
+#endif /* __MANTIS_VP3030_H */
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index e930a67..bd6214d 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1815,6 +1815,8 @@
/* put the buffer in the 'queued' queue */
i = gspca_dev->fr_q;
gspca_dev->fr_queue[i] = index;
+ if (gspca_dev->fr_i == i)
+ gspca_dev->cur_frame = frame;
gspca_dev->fr_q = (i + 1) % gspca_dev->nframes;
PDEBUG(D_FRAM, "qbuf q:%d i:%d o:%d",
gspca_dev->fr_q,
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index aa2f3c7e..1b536f7d 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -48,6 +48,12 @@
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528")
}
}, {
+ .ident = "Fujitsu-Siemens Amilo Xi 2428",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2428")
+ }
+ }, {
.ident = "Fujitsu-Siemens Amilo Xi 2528",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index 4dbb882..0a6b8f0 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -1533,7 +1533,7 @@
static void setsharpness_96(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- u8 val;
+ s8 val;
val = sd->sharpness;
if (val < 0) { /* auto */
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index 4cff803..0ca1c06 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -2319,7 +2319,7 @@
}
}
if (avg_lum > MAX_AVG_LUM) {
- if (sd->gain - 1 >= 0) {
+ if (sd->gain >= 1) {
sd->gain--;
set_gain(gspca_dev);
}
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
index 487d405..96c6192 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
@@ -228,6 +228,7 @@
/* This reg is written twice. Some kind of reset? */
{NULL, 0x1620, 0x80},
{NULL, 0x1620, 0x00},
+ {NULL, 0x1443, 0x00},
{NULL, 0x1423, 0x04},
{x1500, 0x1500, ARRAY_SIZE(x1500)},
{x1536, 0x1536, ARRAY_SIZE(x1536)},
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 716df6b..306b7d7 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -709,7 +709,7 @@
spca504B_PollingDataReady(gspca_dev);
/* Init the cam width height with some values get on init ? */
- reg_w_riv(gspca_dev, 0x31, 0, 0x04);
+ reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00);
spca504B_WaitCmdStatus(gspca_dev);
spca504B_PollingDataReady(gspca_dev);
break;
@@ -807,14 +807,14 @@
default:
/* case BRIDGE_SPCA533: */
/* case BRIDGE_SPCA504B: */
- reg_w_riv(gspca_dev, 0, 0x00, 0x21ad); /* hue */
- reg_w_riv(gspca_dev, 0, 0x01, 0x21ac); /* sat/hue */
- reg_w_riv(gspca_dev, 0, 0x00, 0x21a3); /* gamma */
+ reg_w_riv(gspca_dev, 0, 0x21ad, 0x00); /* hue */
+ reg_w_riv(gspca_dev, 0, 0x21ac, 0x01); /* sat/hue */
+ reg_w_riv(gspca_dev, 0, 0x21a3, 0x00); /* gamma */
break;
case BRIDGE_SPCA536:
- reg_w_riv(gspca_dev, 0, 0x40, 0x20f5);
- reg_w_riv(gspca_dev, 0, 0x01, 0x20f4);
- reg_w_riv(gspca_dev, 0, 0x00, 0x2089);
+ reg_w_riv(gspca_dev, 0, 0x20f5, 0x40);
+ reg_w_riv(gspca_dev, 0, 0x20f4, 0x01);
+ reg_w_riv(gspca_dev, 0, 0x2089, 0x00);
break;
}
if (pollreg)
@@ -887,11 +887,11 @@
switch (sd->bridge) {
case BRIDGE_SPCA504B:
reg_w_riv(gspca_dev, 0x1d, 0x00, 0);
- reg_w_riv(gspca_dev, 0, 0x01, 0x2306);
- reg_w_riv(gspca_dev, 0, 0x00, 0x0d04);
- reg_w_riv(gspca_dev, 0, 0x00, 0x2000);
- reg_w_riv(gspca_dev, 0, 0x13, 0x2301);
- reg_w_riv(gspca_dev, 0, 0x00, 0x2306);
+ reg_w_riv(gspca_dev, 0x00, 0x2306, 0x01);
+ reg_w_riv(gspca_dev, 0x00, 0x0d04, 0x00);
+ reg_w_riv(gspca_dev, 0x00, 0x2000, 0x00);
+ reg_w_riv(gspca_dev, 0x00, 0x2301, 0x13);
+ reg_w_riv(gspca_dev, 0x00, 0x2306, 0x00);
/* fall thru */
case BRIDGE_SPCA533:
spca504B_PollingDataReady(gspca_dev);
@@ -1000,7 +1000,7 @@
spca504B_WaitCmdStatus(gspca_dev);
break;
default:
- reg_w_riv(gspca_dev, 0x31, 0, 0x04);
+ reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00);
spca504B_WaitCmdStatus(gspca_dev);
spca504B_PollingDataReady(gspca_dev);
break;
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index c090efc..71921c8 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -3009,6 +3009,10 @@
int l;
frame = gspca_get_i_frame(gspca_dev);
+ if (frame == NULL) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
l = frame->data_end - frame->data;
if (len > frame->v4l2_buf.length - l)
len = frame->v4l2_buf.length - l;
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 2ba14fb..c167cc3 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -718,7 +718,7 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!res || !irq) {
+ if (!res || (int)irq <= 0) {
err = -ENODEV;
goto exit;
}
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index 7e42989..805226e 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -563,7 +563,7 @@
struct i2c_client *client = sd->priv;
struct rj54n1 *rj54n1 = to_rj54n1(client);
struct v4l2_rect *rect = &a->c;
- unsigned int dummy, output_w, output_h,
+ unsigned int dummy = 0, output_w, output_h,
input_w = rect->width, input_h = rect->height;
int ret;
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 9f85e91..a7ad781 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -420,19 +420,6 @@
ctrl |= SAA7134_MAIN_CTRL_TE5;
irq |= SAA7134_IRQ1_INTE_RA2_1 |
SAA7134_IRQ1_INTE_RA2_0;
-
- /* dma: setup channel 5 (= TS) */
-
- saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff);
- saa_writeb(SAA7134_TS_DMA1,
- ((dev->ts.nr_packets - 1) >> 8) & 0xff);
- /* TSNOPIT=0, TSCOLAP=0 */
- saa_writeb(SAA7134_TS_DMA2,
- (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00);
- saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
- saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 |
- SAA7134_RS_CONTROL_ME |
- (dev->ts.pt_ts.dma >> 12));
}
/* set task conditions + field handling */
diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c
index 03488ba..b9817d7 100644
--- a/drivers/media/video/saa7134/saa7134-ts.c
+++ b/drivers/media/video/saa7134/saa7134-ts.c
@@ -250,6 +250,19 @@
BUG_ON(dev->ts_started);
+ /* dma: setup channel 5 (= TS) */
+ saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff);
+ saa_writeb(SAA7134_TS_DMA1,
+ ((dev->ts.nr_packets - 1) >> 8) & 0xff);
+ /* TSNOPIT=0, TSCOLAP=0 */
+ saa_writeb(SAA7134_TS_DMA2,
+ (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00);
+ saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
+ saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 |
+ SAA7134_RS_CONTROL_ME |
+ (dev->ts.pt_ts.dma >> 12));
+
+ /* reset hardware TS buffers */
saa_writeb(SAA7134_TS_SERIAL1, 0x00);
saa_writeb(SAA7134_TS_SERIAL1, 0x03);
saa_writeb(SAA7134_TS_SERIAL1, 0x00);
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index d69363f..f09c714 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -1827,7 +1827,7 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!res || !irq) {
+ if (!res || (int)irq <= 0) {
dev_err(&pdev->dev, "Not enough CEU platform resources.\n");
err = -ENODEV;
goto exit;
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 0469d7a..ec8ef8c 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -1393,7 +1393,7 @@
size = entity->processing.bControlSize;
for (i = 0; i < ARRAY_SIZE(blacklist); ++i) {
- if (!usb_match_id(dev->intf, &blacklist[i].id))
+ if (!usb_match_one_id(dev->intf, &blacklist[i].id))
continue;
if (blacklist[i].index >= 8 * size ||
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index f854698..ea11839 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -59,9 +59,9 @@
* returns immediately.
*
* When the buffer is full, the completion handler removes it from the irq
- * queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue.
+ * queue, marks it as done (UVC_BUF_STATE_DONE) and wakes its wait queue.
* At that point, any process waiting on the buffer will be woken up. If a
- * process tries to dequeue a buffer after it has been marked ready, the
+ * process tries to dequeue a buffer after it has been marked done, the
* dequeing will succeed immediately.
*
* 2. Buffers are queued, user is waiting on a buffer and the device gets
@@ -201,6 +201,7 @@
break;
case UVC_BUF_STATE_QUEUED:
case UVC_BUF_STATE_ACTIVE:
+ case UVC_BUF_STATE_READY:
v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED;
break;
case UVC_BUF_STATE_IDLE:
@@ -295,13 +296,15 @@
{
if (nonblocking) {
return (buf->state != UVC_BUF_STATE_QUEUED &&
- buf->state != UVC_BUF_STATE_ACTIVE)
+ buf->state != UVC_BUF_STATE_ACTIVE &&
+ buf->state != UVC_BUF_STATE_READY)
? 0 : -EAGAIN;
}
return wait_event_interruptible(buf->wait,
buf->state != UVC_BUF_STATE_QUEUED &&
- buf->state != UVC_BUF_STATE_ACTIVE);
+ buf->state != UVC_BUF_STATE_ACTIVE &&
+ buf->state != UVC_BUF_STATE_READY);
}
/*
@@ -348,6 +351,7 @@
case UVC_BUF_STATE_IDLE:
case UVC_BUF_STATE_QUEUED:
case UVC_BUF_STATE_ACTIVE:
+ case UVC_BUF_STATE_READY:
default:
uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u "
"(driver bug?).\n", buf->state);
@@ -489,6 +493,7 @@
spin_lock_irqsave(&queue->irqlock, flags);
list_del(&buf->queue);
+ buf->state = UVC_BUF_STATE_DONE;
if (!list_empty(&queue->irqqueue))
nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
queue);
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 9a98028..7dcf534 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -441,7 +441,7 @@
if (fid != stream->last_fid && buf->buf.bytesused != 0) {
uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit "
"toggled).\n");
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
return -EAGAIN;
}
@@ -470,7 +470,7 @@
/* Complete the current frame if the buffer size was exceeded. */
if (len > maxlen) {
uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n");
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
}
}
@@ -482,7 +482,7 @@
uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
if (data[0] == len)
uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n");
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
if (stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID)
stream->last_fid ^= UVC_STREAM_FID;
}
@@ -568,8 +568,7 @@
uvc_video_decode_end(stream, buf, mem,
urb->iso_frame_desc[i].actual_length);
- if (buf->state == UVC_BUF_STATE_DONE ||
- buf->state == UVC_BUF_STATE_ERROR)
+ if (buf->state == UVC_BUF_STATE_READY)
buf = uvc_queue_next_buffer(&stream->queue, buf);
}
}
@@ -627,8 +626,7 @@
if (!stream->bulk.skip_payload && buf != NULL) {
uvc_video_decode_end(stream, buf, stream->bulk.header,
stream->bulk.payload_size);
- if (buf->state == UVC_BUF_STATE_DONE ||
- buf->state == UVC_BUF_STATE_ERROR)
+ if (buf->state == UVC_BUF_STATE_READY)
buf = uvc_queue_next_buffer(&stream->queue,
buf);
}
@@ -669,7 +667,7 @@
stream->bulk.payload_size == stream->bulk.max_payload_size) {
if (buf->buf.bytesused == stream->queue.buf_used) {
stream->queue.buf_used = 0;
- buf->state = UVC_BUF_STATE_DONE;
+ buf->state = UVC_BUF_STATE_READY;
uvc_queue_next_buffer(&stream->queue, buf);
stream->last_fid ^= UVC_STREAM_FID;
}
@@ -924,10 +922,8 @@
static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags)
{
struct usb_interface *intf = stream->intf;
- struct usb_host_interface *alts;
- struct usb_host_endpoint *ep = NULL;
- int intfnum = stream->intfnum;
- unsigned int bandwidth, psize, i;
+ struct usb_host_endpoint *ep;
+ unsigned int i;
int ret;
stream->last_fid = -1;
@@ -936,6 +932,12 @@
stream->bulk.payload_size = 0;
if (intf->num_altsetting > 1) {
+ struct usb_host_endpoint *best_ep = NULL;
+ unsigned int best_psize = 3 * 1024;
+ unsigned int bandwidth;
+ unsigned int uninitialized_var(altsetting);
+ int intfnum = stream->intfnum;
+
/* Isochronous endpoint, select the alternate setting. */
bandwidth = stream->ctrl.dwMaxPayloadTransferSize;
@@ -949,6 +951,9 @@
}
for (i = 0; i < intf->num_altsetting; ++i) {
+ struct usb_host_interface *alts;
+ unsigned int psize;
+
alts = &intf->altsetting[i];
ep = uvc_find_endpoint(alts,
stream->header.bEndpointAddress);
@@ -958,21 +963,27 @@
/* Check if the bandwidth is high enough. */
psize = le16_to_cpu(ep->desc.wMaxPacketSize);
psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
- if (psize >= bandwidth)
- break;
+ if (psize >= bandwidth && psize <= best_psize) {
+ altsetting = i;
+ best_psize = psize;
+ best_ep = ep;
+ }
}
- if (i >= intf->num_altsetting) {
+ if (best_ep == NULL) {
uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting "
"for requested bandwidth.\n");
return -EIO;
}
- ret = usb_set_interface(stream->dev->udev, intfnum, i);
+ uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u "
+ "(%u B/frame bandwidth).\n", altsetting, best_psize);
+
+ ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
if (ret < 0)
return ret;
- ret = uvc_init_video_isoc(stream, ep, gfp_flags);
+ ret = uvc_init_video_isoc(stream, best_ep, gfp_flags);
} else {
/* Bulk endpoint, proceed to URB initialization. */
ep = uvc_find_endpoint(&intf->altsetting[0],
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index 7ec9a04..2337585 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -365,8 +365,9 @@
UVC_BUF_STATE_IDLE = 0,
UVC_BUF_STATE_QUEUED = 1,
UVC_BUF_STATE_ACTIVE = 2,
- UVC_BUF_STATE_DONE = 3,
- UVC_BUF_STATE_ERROR = 4,
+ UVC_BUF_STATE_READY = 3,
+ UVC_BUF_STATE_DONE = 4,
+ UVC_BUF_STATE_ERROR = 5,
};
struct uvc_buffer {
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index ca2f2c4..8f0d184 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -11,9 +11,9 @@
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
-obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o
-obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o
-obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o
+obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
+obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
+obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index e22128c..95c1e6b 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -80,6 +80,7 @@
u16 irq_bothedge[4];
struct gpio_chip gpio;
struct device *dev;
+ void __iomem *tmio_cnf;
struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)];
};
@@ -685,8 +686,24 @@
.resources = ds1wm_resources,
};
+static void asic3_mmc_pwr(struct platform_device *pdev, int state)
+{
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+ tmio_core_mmc_pwr(asic->tmio_cnf, 1 - asic->bus_shift, state);
+}
+
+static void asic3_mmc_clk_div(struct platform_device *pdev, int state)
+{
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+ tmio_core_mmc_clk_div(asic->tmio_cnf, 1 - asic->bus_shift, state);
+}
+
static struct tmio_mmc_data asic3_mmc_data = {
- .hclk = 24576000,
+ .hclk = 24576000,
+ .set_pwr = asic3_mmc_pwr,
+ .set_clk_div = asic3_mmc_clk_div,
};
static struct resource asic3_mmc_resources[] = {
@@ -696,11 +713,6 @@
.flags = IORESOURCE_MEM,
},
{
- .start = ASIC3_SD_CONFIG_BASE,
- .end = ASIC3_SD_CONFIG_BASE + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- {
.start = 0,
.end = 0,
.flags = IORESOURCE_IRQ,
@@ -743,6 +755,10 @@
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
ASIC3_SDHWCTRL_SDPWR, 1);
+ /* ASIC3_SD_CTRL_BASE assumes 32-bit addressing, TMIO is 16-bit */
+ tmio_core_mmc_enable(asic->tmio_cnf, 1 - asic->bus_shift,
+ ASIC3_SD_CTRL_BASE >> 1);
+
return 0;
}
@@ -797,10 +813,15 @@
asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm);
/* MMC */
+ asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +
+ mem_sdio->start, 0x400 >> asic->bus_shift);
+ if (!asic->tmio_cnf) {
+ ret = -ENOMEM;
+ dev_dbg(asic->dev, "Couldn't ioremap SD_CONFIG\n");
+ goto out;
+ }
asic3_mmc_resources[0].start >>= asic->bus_shift;
asic3_mmc_resources[0].end >>= asic->bus_shift;
- asic3_mmc_resources[1].start >>= asic->bus_shift;
- asic3_mmc_resources[1].end >>= asic->bus_shift;
asic3_cell_mmc.platform_data = &asic3_cell_mmc;
asic3_cell_mmc.data_size = sizeof(asic3_cell_mmc);
@@ -820,7 +841,10 @@
static void asic3_mfd_remove(struct platform_device *pdev)
{
+ struct asic3 *asic = platform_get_drvdata(pdev);
+
mfd_remove_devices(&pdev->dev);
+ iounmap(asic->tmio_cnf);
}
/* Core */
diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c
index a1ade23..735c8a4 100644
--- a/drivers/mfd/mc13783-core.c
+++ b/drivers/mfd/mc13783-core.c
@@ -619,6 +619,8 @@
}
/* This should go away (END) */
+ mc13783_unlock(mc13783);
+
if (pdata->flags & MC13783_USE_ADC)
mc13783_add_subdevice(mc13783, "mc13783-adc");
@@ -641,8 +643,6 @@
if (pdata->flags & MC13783_USE_TOUCHSCREEN)
mc13783_add_subdevice(mc13783, "mc13783-ts");
- mc13783_unlock(mc13783);
-
return 0;
}
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index 0a255c1..bcf4687 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -38,6 +38,19 @@
T7L66XB_CELL_MMC,
};
+static const struct resource t7l66xb_mmc_resources[] = {
+ {
+ .start = 0x800,
+ .end = 0x9ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_T7L66XB_MMC,
+ .end = IRQ_T7L66XB_MMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
#define SCR_REVID 0x08 /* b Revision ID */
#define SCR_IMR 0x42 /* b Interrupt Mask */
#define SCR_DEV_CTL 0xe0 /* b Device control */
@@ -83,6 +96,9 @@
spin_unlock_irqrestore(&t7l66xb->lock, flags);
+ tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0,
+ t7l66xb_mmc_resources[0].start & 0xfffe);
+
return 0;
}
@@ -106,28 +122,28 @@
return 0;
}
+static void t7l66xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_pwr(t7l66xb->scr + 0x200, 0, state);
+}
+
+static void t7l66xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_clk_div(t7l66xb->scr + 0x200, 0, state);
+}
+
/*--------------------------------------------------------------------------*/
static struct tmio_mmc_data t7166xb_mmc_data = {
.hclk = 24000000,
-};
-
-static const struct resource t7l66xb_mmc_resources[] = {
- {
- .start = 0x800,
- .end = 0x9ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x200,
- .end = 0x2ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_T7L66XB_MMC,
- .end = IRQ_T7L66XB_MMC,
- .flags = IORESOURCE_IRQ,
- },
+ .set_pwr = t7l66xb_mmc_pwr,
+ .set_clk_div = t7l66xb_mmc_clk_div,
};
static const struct resource t7l66xb_nand_resources[] = {
@@ -282,6 +298,9 @@
if (pdata && pdata->resume)
pdata->resume(dev);
+ tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0,
+ t7l66xb_mmc_resources[0].start & 0xfffe);
+
return 0;
}
#else
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index 3280ab33..5c7f043 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -22,28 +22,52 @@
TC6387XB_CELL_MMC,
};
+struct tc6387xb {
+ void __iomem *scr;
+ struct clk *clk32k;
+ struct resource rscr;
+};
+
+static struct resource tc6387xb_mmc_resources[] = {
+ {
+ .start = 0x800,
+ .end = 0x9ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*--------------------------------------------------------------------------*/
+
#ifdef CONFIG_PM
static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state)
{
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
if (pdata && pdata->suspend)
pdata->suspend(dev);
- clk_disable(clk32k);
+ clk_disable(tc6387xb->clk32k);
return 0;
}
static int tc6387xb_resume(struct platform_device *dev)
{
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
- clk_enable(clk32k);
+ clk_enable(tc6387xb->clk32k);
if (pdata && pdata->resume)
pdata->resume(dev);
+ tmio_core_mmc_resume(tc6387xb->scr + 0x200, 0,
+ tc6387xb_mmc_resources[0].start & 0xfffe);
+
return 0;
}
#else
@@ -53,12 +77,32 @@
/*--------------------------------------------------------------------------*/
+static void tc6387xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_pwr(tc6387xb->scr + 0x200, 0, state);
+}
+
+static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_clk_div(tc6387xb->scr + 0x200, 0, state);
+}
+
+
static int tc6387xb_mmc_enable(struct platform_device *mmc)
{
struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_enable(clk32k);
+ clk_enable(tc6387xb->clk32k);
+
+ tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0,
+ tc6387xb_mmc_resources[0].start & 0xfffe);
return 0;
}
@@ -66,36 +110,20 @@
static int tc6387xb_mmc_disable(struct platform_device *mmc)
{
struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct clk *clk32k = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_disable(clk32k);
+ clk_disable(tc6387xb->clk32k);
return 0;
}
-/*--------------------------------------------------------------------------*/
-
static struct tmio_mmc_data tc6387xb_mmc_data = {
.hclk = 24000000,
+ .set_pwr = tc6387xb_mmc_pwr,
+ .set_clk_div = tc6387xb_mmc_clk_div,
};
-static struct resource tc6387xb_mmc_resources[] = {
- {
- .start = 0x800,
- .end = 0x9ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x200,
- .end = 0x2ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IRQ,
- },
-};
+/*--------------------------------------------------------------------------*/
static struct mfd_cell tc6387xb_cells[] = {
[TC6387XB_CELL_MMC] = {
@@ -111,8 +139,9 @@
static int tc6387xb_probe(struct platform_device *dev)
{
struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
- struct resource *iomem;
+ struct resource *iomem, *rscr;
struct clk *clk32k;
+ struct tc6387xb *tc6387xb;
int irq, ret;
iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
@@ -120,18 +149,40 @@
return -EINVAL;
}
+ tc6387xb = kzalloc(sizeof *tc6387xb, GFP_KERNEL);
+ if (!tc6387xb)
+ return -ENOMEM;
+
ret = platform_get_irq(dev, 0);
if (ret >= 0)
irq = ret;
else
- goto err_resource;
+ goto err_no_irq;
clk32k = clk_get(&dev->dev, "CLK_CK32K");
if (IS_ERR(clk32k)) {
ret = PTR_ERR(clk32k);
- goto err_resource;
+ goto err_no_clk;
}
- platform_set_drvdata(dev, clk32k);
+
+ rscr = &tc6387xb->rscr;
+ rscr->name = "tc6387xb-core";
+ rscr->start = iomem->start;
+ rscr->end = iomem->start + 0xff;
+ rscr->flags = IORESOURCE_MEM;
+
+ ret = request_resource(iomem, rscr);
+ if (ret)
+ goto err_resource;
+
+ tc6387xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+ if (!tc6387xb->scr) {
+ ret = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ tc6387xb->clk32k = clk32k;
+ platform_set_drvdata(dev, tc6387xb);
if (pdata && pdata->enable)
pdata->enable(dev);
@@ -149,8 +200,13 @@
if (!ret)
return 0;
- clk_put(clk32k);
+err_ioremap:
+ release_resource(&tc6387xb->rscr);
err_resource:
+ clk_put(clk32k);
+err_no_clk:
+err_no_irq:
+ kfree(tc6387xb);
return ret;
}
@@ -195,3 +251,4 @@
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Ian Molton");
MODULE_ALIAS("platform:tc6387xb");
+
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 1429a73..4bc5a08 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -136,10 +136,6 @@
return 0;
}
-static struct tmio_mmc_data tc6393xb_mmc_data = {
- .hclk = 24000000,
-};
-
static struct resource __devinitdata tc6393xb_nand_resources[] = {
{
.start = 0x1000,
@@ -165,11 +161,6 @@
.flags = IORESOURCE_MEM,
},
{
- .start = 0x200,
- .end = 0x2ff,
- .flags = IORESOURCE_MEM,
- },
- {
.start = IRQ_TC6393_MMC,
.end = IRQ_TC6393_MMC,
.flags = IORESOURCE_IRQ,
@@ -346,6 +337,50 @@
}
EXPORT_SYMBOL(tc6393xb_lcd_mode);
+static int tc6393xb_mmc_enable(struct platform_device *mmc)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_enable(tc6393xb->scr + 0x200, 0,
+ tc6393xb_mmc_resources[0].start & 0xfffe);
+
+ return 0;
+}
+
+static int tc6393xb_mmc_resume(struct platform_device *mmc)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_resume(tc6393xb->scr + 0x200, 0,
+ tc6393xb_mmc_resources[0].start & 0xfffe);
+
+ return 0;
+}
+
+static void tc6393xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_pwr(tc6393xb->scr + 0x200, 0, state);
+}
+
+static void tc6393xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+ struct platform_device *dev = to_platform_device(mmc->dev.parent);
+ struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+ tmio_core_mmc_clk_div(tc6393xb->scr + 0x200, 0, state);
+}
+
+static struct tmio_mmc_data tc6393xb_mmc_data = {
+ .hclk = 24000000,
+ .set_pwr = tc6393xb_mmc_pwr,
+ .set_clk_div = tc6393xb_mmc_clk_div,
+};
+
static struct mfd_cell __devinitdata tc6393xb_cells[] = {
[TC6393XB_CELL_NAND] = {
.name = "tmio-nand",
@@ -355,6 +390,8 @@
},
[TC6393XB_CELL_MMC] = {
.name = "tmio-mmc",
+ .enable = tc6393xb_mmc_enable,
+ .resume = tc6393xb_mmc_resume,
.driver_data = &tc6393xb_mmc_data,
.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
.resources = tc6393xb_mmc_resources,
@@ -836,3 +873,4 @@
MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer");
MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller");
MODULE_ALIAS("platform:tc6393xb");
+
diff --git a/drivers/mfd/tmio_core.c b/drivers/mfd/tmio_core.c
new file mode 100644
index 0000000..eddc19a
--- /dev/null
+++ b/drivers/mfd/tmio_core.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright(c) 2009 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/tmio.h>
+
+int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
+{
+ /* Enable the MMC/SD Control registers */
+ sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
+ sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
+
+ /* Disable SD power during suspend */
+ sd_config_write8(cnf, shift, CNF_PWR_CTL_3, 0x01);
+
+ /* The below is required but why? FIXME */
+ sd_config_write8(cnf, shift, CNF_STOP_CLK_CTL, 0x1f);
+
+ /* Power down SD bus */
+ sd_config_write8(cnf, shift, CNF_PWR_CTL_2, 0x00);
+
+ return 0;
+}
+EXPORT_SYMBOL(tmio_core_mmc_enable);
+
+int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base)
+{
+
+ /* Enable the MMC/SD Control registers */
+ sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
+ sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
+
+ return 0;
+}
+EXPORT_SYMBOL(tmio_core_mmc_resume);
+
+void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state)
+{
+ sd_config_write8(cnf, shift, CNF_PWR_CTL_2, state ? 0x02 : 0x00);
+}
+EXPORT_SYMBOL(tmio_core_mmc_pwr);
+
+void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state)
+{
+ sd_config_write8(cnf, shift, CNF_SD_CLK_MODE, state ? 1 : 0);
+}
+EXPORT_SYMBOL(tmio_core_mmc_clk_div);
+
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 8485a70..9a970bd 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -134,8 +134,7 @@
wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
return 0;
- if ((reg == WM8350_GPIO_CONFIGURATION_I_O) ||
- (reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
+ if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
(reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c
index c8df547..9025f29 100644
--- a/drivers/mfd/wm8350-irq.c
+++ b/drivers/mfd/wm8350-irq.c
@@ -434,7 +434,7 @@
irq_handler_t handler, unsigned long flags,
const char *name, void *data)
{
- if (irq < 0 || irq > WM8350_NUM_IRQ || !handler)
+ if (irq < 0 || irq >= WM8350_NUM_IRQ || !handler)
return -EINVAL;
if (wm8350->irq[irq].handler)
@@ -453,7 +453,7 @@
int wm8350_free_irq(struct wm8350 *wm8350, int irq)
{
- if (irq < 0 || irq > WM8350_NUM_IRQ)
+ if (irq < 0 || irq >= WM8350_NUM_IRQ)
return -EINVAL;
wm8350_mask_irq(wm8350, irq);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 90d168a..84c103a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2,6 +2,7 @@
* linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver
*
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ * Copyright (C) 2010 ST-Ericsson AB.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -34,9 +35,6 @@
#define DRIVER_NAME "mmci-pl18x"
-#define DBG(host,fmt,args...) \
- pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)
-
static unsigned int fmax = 515633;
/*
@@ -105,8 +103,8 @@
void __iomem *base;
int blksz_bits;
- DBG(host, "blksz %04x blks %04x flags %08x\n",
- data->blksz, data->blocks, data->flags);
+ dev_dbg(mmc_dev(host->mmc), "blksz %04x blks %04x flags %08x\n",
+ data->blksz, data->blocks, data->flags);
host->data = data;
host->size = data->blksz;
@@ -155,7 +153,7 @@
{
void __iomem *base = host->base;
- DBG(host, "op %02x arg %08x flags %08x\n",
+ dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n",
cmd->opcode, cmd->arg, cmd->flags);
if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {
@@ -184,8 +182,20 @@
{
if (status & MCI_DATABLOCKEND) {
host->data_xfered += data->blksz;
+#ifdef CONFIG_ARCH_U300
+ /*
+ * On the U300 some signal or other is
+ * badly routed so that a data write does
+ * not properly terminate with a MCI_DATAEND
+ * status flag. This quirk will make writes
+ * work again.
+ */
+ if (data->flags & MMC_DATA_WRITE)
+ status |= MCI_DATAEND;
+#endif
}
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+ dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
if (status & MCI_DATACRCFAIL)
data->error = -EILSEQ;
else if (status & MCI_DATATIMEOUT)
@@ -307,7 +317,7 @@
status = readl(base + MMCISTATUS);
- DBG(host, "irq1 %08x\n", status);
+ dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
do {
unsigned long flags;
@@ -401,7 +411,7 @@
status &= readl(host->base + MMCIMASK0);
writel(status, host->base + MMCICLEAR);
- DBG(host, "irq0 %08x\n", status);
+ dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
data = host->data;
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
@@ -428,8 +438,8 @@
WARN_ON(host->mrq != NULL);
if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
- printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
- mmc_hostname(mmc), mrq->data->blksz);
+ dev_err(mmc_dev(mmc), "unsupported block size (%d bytes)\n",
+ mrq->data->blksz);
mrq->cmd->error = -EINVAL;
mmc_request_done(mmc, mrq);
return;
@@ -582,8 +592,8 @@
host->hw_designer = amba_manf(dev);
host->hw_revision = amba_rev(dev);
- DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
- DBG(host, "revision = 0x%01x\n", host->hw_revision);
+ dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
+ dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision);
host->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(host->clk)) {
@@ -608,7 +618,8 @@
if (ret < 0)
goto clk_disable;
host->mclk = clk_get_rate(host->clk);
- DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
+ dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n",
+ host->mclk);
}
host->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!host->base) {
@@ -619,6 +630,8 @@
mmc->ops = &mmci_ops;
mmc->f_min = (host->mclk + 511) / 512;
mmc->f_max = min(host->mclk, fmax);
+ dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+
#ifdef CONFIG_REGULATOR
/* If we're using the regulator framework, try to fetch a regulator */
host->vcc = regulator_get(&dev->dev, "vmmc");
@@ -712,7 +725,7 @@
mmc_add_host(mmc);
- printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
+ dev_info(&dev->dev, "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 7cccc85..e22c3fa 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -46,7 +46,9 @@
clk |= 0x100;
}
- sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+ if (host->set_clk_div)
+ host->set_clk_div(host->pdev, (clk>>22) & 1);
+
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
}
@@ -427,12 +429,13 @@
/* Power sequence - OFF -> ON -> UP */
switch (ios->power_mode) {
case MMC_POWER_OFF: /* power down SD bus */
- sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, 0);
tmio_mmc_clk_stop(host);
break;
case MMC_POWER_ON: /* power up SD bus */
-
- sd_config_write8(host, CNF_PWR_CTL_2, 0x02);
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, 1);
break;
case MMC_POWER_UP: /* start bus clock */
tmio_mmc_clk_start(host);
@@ -485,21 +488,15 @@
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
struct mmc_host *mmc = platform_get_drvdata(dev);
- struct tmio_mmc_host *host = mmc_priv(mmc);
int ret = 0;
/* Tell the MFD core we are ready to be enabled */
- if (cell->enable) {
- ret = cell->enable(dev);
+ if (cell->resume) {
+ ret = cell->resume(dev);
if (ret)
goto out;
}
- /* Enable the MMC/SD Control registers */
- sd_config_write16(host, CNF_CMD, SDCREN);
- sd_config_write32(host, CNF_CTL_BASE,
- (dev->resource[0].start >> host->bus_shift) & 0xfffe);
-
mmc_resume_host(mmc);
out:
@@ -514,17 +511,16 @@
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
struct tmio_mmc_data *pdata;
- struct resource *res_ctl, *res_cnf;
+ struct resource *res_ctl;
struct tmio_mmc_host *host;
struct mmc_host *mmc;
int ret = -EINVAL;
- if (dev->num_resources != 3)
+ if (dev->num_resources != 2)
goto out;
res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
- res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
- if (!res_ctl || !res_cnf)
+ if (!res_ctl)
goto out;
pdata = cell->driver_data;
@@ -539,8 +535,12 @@
host = mmc_priv(mmc);
host->mmc = mmc;
+ host->pdev = dev;
platform_set_drvdata(dev, mmc);
+ host->set_pwr = pdata->set_pwr;
+ host->set_clk_div = pdata->set_clk_div;
+
/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
host->bus_shift = resource_size(res_ctl) >> 10;
@@ -548,10 +548,6 @@
if (!host->ctl)
goto host_free;
- host->cnf = ioremap(res_cnf->start, resource_size(res_cnf));
- if (!host->cnf)
- goto unmap_ctl;
-
mmc->ops = &tmio_mmc_ops;
mmc->caps = MMC_CAP_4_BIT_DATA;
mmc->f_max = pdata->hclk;
@@ -562,23 +558,9 @@
if (cell->enable) {
ret = cell->enable(dev);
if (ret)
- goto unmap_cnf;
+ goto unmap_ctl;
}
- /* Enable the MMC/SD Control registers */
- sd_config_write16(host, CNF_CMD, SDCREN);
- sd_config_write32(host, CNF_CTL_BASE,
- (dev->resource[0].start >> host->bus_shift) & 0xfffe);
-
- /* Disable SD power during suspend */
- sd_config_write8(host, CNF_PWR_CTL_3, 0x01);
-
- /* The below is required but why? FIXME */
- sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f);
-
- /* Power down SD bus*/
- sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
-
tmio_mmc_clk_stop(host);
reset(host);
@@ -586,14 +568,14 @@
if (ret >= 0)
host->irq = ret;
else
- goto unmap_cnf;
+ goto unmap_ctl;
disable_mmc_irqs(host, TMIO_MASK_ALL);
ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host);
if (ret)
- goto unmap_cnf;
+ goto unmap_ctl;
mmc_add_host(mmc);
@@ -605,8 +587,6 @@
return 0;
-unmap_cnf:
- iounmap(host->cnf);
unmap_ctl:
iounmap(host->ctl);
host_free:
@@ -626,7 +606,6 @@
mmc_remove_host(mmc);
free_irq(host->irq, host);
iounmap(host->ctl);
- iounmap(host->cnf);
mmc_free_host(mmc);
}
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9fa9985..692dc23 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -11,26 +11,6 @@
#include <linux/highmem.h>
-#define CNF_CMD 0x04
-#define CNF_CTL_BASE 0x10
-#define CNF_INT_PIN 0x3d
-#define CNF_STOP_CLK_CTL 0x40
-#define CNF_GCLK_CTL 0x41
-#define CNF_SD_CLK_MODE 0x42
-#define CNF_PIN_STATUS 0x44
-#define CNF_PWR_CTL_1 0x48
-#define CNF_PWR_CTL_2 0x49
-#define CNF_PWR_CTL_3 0x4a
-#define CNF_CARD_DETECT_MODE 0x4c
-#define CNF_SD_SLOT 0x50
-#define CNF_EXT_GCLK_CTL_1 0xf0
-#define CNF_EXT_GCLK_CTL_2 0xf1
-#define CNF_EXT_GCLK_CTL_3 0xf9
-#define CNF_SD_LED_EN_1 0xfa
-#define CNF_SD_LED_EN_2 0xfe
-
-#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
-
#define CTL_SD_CMD 0x00
#define CTL_ARG_REG 0x04
#define CTL_STOP_INTERNAL_ACTION 0x08
@@ -110,7 +90,6 @@
struct tmio_mmc_host {
- void __iomem *cnf;
void __iomem *ctl;
unsigned long bus_shift;
struct mmc_command *cmd;
@@ -119,10 +98,16 @@
struct mmc_host *mmc;
int irq;
+ /* Callbacks for clock / power control */
+ void (*set_pwr)(struct platform_device *host, int state);
+ void (*set_clk_div)(struct platform_device *host, int state);
+
/* pio related stuff */
struct scatterlist *sg_ptr;
unsigned int sg_len;
unsigned int sg_off;
+
+ struct platform_device *pdev;
};
#include <linux/io.h>
@@ -163,25 +148,6 @@
writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
}
-static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
- u8 val)
-{
- writeb(val, host->cnf + (addr << host->bus_shift));
-}
-
-static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
- u16 val)
-{
- writew(val, host->cnf + (addr << host->bus_shift));
-}
-
-static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
- u32 val)
-{
- writew(val, host->cnf + (addr << host->bus_shift));
- writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
-}
-
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index cebbd90..d6ee28f 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -582,7 +582,6 @@
extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
u16 data);
-extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index ad08cf3..8b6ecd1 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -138,6 +138,10 @@
#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW 0x0400
+
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
@@ -219,6 +223,7 @@
static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -270,7 +275,21 @@
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
phy->id = e1000_phy_unknown;
- e1000e_get_phy_id(hw);
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ goto out;
+ if ((phy->id == 0) || (phy->id == PHY_REVISION_MASK)) {
+ /*
+ * In case the PHY needs to be in mdio slow mode (eg. 82577),
+ * set slow mode and try to get the PHY id again.
+ */
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ goto out;
+ }
phy->type = e1000e_get_phy_type_from_id(phy->id);
switch (phy->type) {
@@ -292,6 +311,7 @@
break;
}
+out:
return ret_val;
}
@@ -1076,16 +1096,44 @@
/**
+ * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= HV_KMRN_MDIO_SLOW;
+
+ ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data);
+
+ return ret_val;
+}
+
+/**
* e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
* done after every PHY reset.
**/
static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
{
s32 ret_val = 0;
+ u16 phy_data;
if (hw->mac.type != e1000_pchlan)
return ret_val;
+ /* Set MDIO slow mode before any other MDIO access */
+ if (hw->phy.type == e1000_phy_82577) {
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (ret_val)
+ goto out;
+ }
+
if (((hw->phy.type == e1000_phy_82577) &&
((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
@@ -1118,16 +1166,32 @@
hw->phy.addr = 1;
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+ hw->phy.ops.release(hw);
if (ret_val)
goto out;
- hw->phy.ops.release(hw);
/*
* Configure the K1 Si workaround during phy reset assuming there is
* link so that it disables K1 if link is in 1Gbps.
*/
ret_val = e1000_k1_gig_workaround_hv(hw, true);
+ if (ret_val)
+ goto out;
+ /* Workaround for link disconnects on a busy hub in half duplex */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_reg_locked(hw,
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ &phy_data);
+ if (ret_val)
+ goto release;
+ ret_val = hw->phy.ops.write_reg_locked(hw,
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ phy_data & 0x00FF);
+release:
+ hw->phy.ops.release(hw);
out:
return ret_val;
}
@@ -1184,6 +1248,7 @@
/* Allow time for h/w to get to a quiescent state after reset */
mdelay(10);
+ /* Perform any necessary post-reset workarounds */
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
if (ret_val)
@@ -2484,6 +2549,10 @@
if (!ret_val)
e1000_release_swflag_ich8lan(hw);
+ /* Perform any necessary post-reset workarounds */
+ if (hw->mac.type == e1000_pchlan)
+ ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+
if (ctrl & E1000_CTRL_PHY_RST)
ret_val = hw->phy.ops.get_cfg_done(hw);
@@ -2528,9 +2597,6 @@
kab |= E1000_KABGTXD_BGSQLBIAS;
ew32(KABGTXD, kab);
- if (hw->mac.type == e1000_pchlan)
- ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
-
out:
return ret_val;
}
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 55a2c0a..7f3ceb9 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -152,32 +152,9 @@
if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
goto out;
- /*
- * If the PHY ID is still unknown, we may have an 82577
- * without link. We will try again after setting Slow MDIC
- * mode. No harm in trying again in this case since the PHY
- * ID is unknown at this point anyway.
- */
- ret_val = phy->ops.acquire(hw);
- if (ret_val)
- goto out;
- ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
- if (ret_val)
- goto out;
- phy->ops.release(hw);
-
retry_count++;
}
out:
- /* Revert to MDIO fast mode, if applicable */
- if (retry_count) {
- ret_val = phy->ops.acquire(hw);
- if (ret_val)
- return ret_val;
- ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
- phy->ops.release(hw);
- }
-
return ret_val;
}
@@ -2791,38 +2768,6 @@
}
/**
- * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
- * @hw: pointer to the HW structure
- * @slow: true for slow mode, false for normal mode
- *
- * Assumes semaphore already acquired.
- **/
-s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
-{
- s32 ret_val = 0;
- u16 data = 0;
-
- /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
- hw->phy.addr = 1;
- ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
- if (ret_val)
- goto out;
-
- ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
- (0x2180 | (slow << 10)));
- if (ret_val)
- goto out;
-
- /* dummy read when reverting to fast mode - throw away result */
- if (!slow)
- ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
-
-out:
- return ret_val;
-}
-
-/**
* __e1000_read_phy_reg_hv - Read HV PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
@@ -2839,7 +2784,6 @@
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
- bool in_slow_mode = false;
if (!locked) {
ret_val = hw->phy.ops.acquire(hw);
@@ -2847,16 +2791,6 @@
return ret_val;
}
- /* Workaround failure in MDIO access while cable is disconnected */
- if ((hw->phy.type == e1000_phy_82577) &&
- !(er32(STATUS) & E1000_STATUS_LU)) {
- ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
- if (ret_val)
- goto out;
-
- in_slow_mode = true;
- }
-
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
@@ -2893,10 +2827,6 @@
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
data);
out:
- /* Revert to MDIO fast mode, if applicable */
- if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
- ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
-
if (!locked)
hw->phy.ops.release(hw);
@@ -2948,7 +2878,6 @@
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
- bool in_slow_mode = false;
if (!locked) {
ret_val = hw->phy.ops.acquire(hw);
@@ -2956,16 +2885,6 @@
return ret_val;
}
- /* Workaround failure in MDIO access while cable is disconnected */
- if ((hw->phy.type == e1000_phy_82577) &&
- !(er32(STATUS) & E1000_STATUS_LU)) {
- ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
- if (ret_val)
- goto out;
-
- in_slow_mode = true;
- }
-
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
@@ -3019,10 +2938,6 @@
data);
out:
- /* Revert to MDIO fast mode, if applicable */
- if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
- ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
-
if (!locked)
hw->phy.ops.release(hw);
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile
index 21b41f4..bfef0eb 100644
--- a/drivers/net/ixgbe/Makefile
+++ b/drivers/net/ixgbe/Makefile
@@ -1,7 +1,7 @@
################################################################################
#
# Intel 10 Gigabit PCI Express Linux driver
-# Copyright(c) 1999 - 2009 Intel Corporation.
+# Copyright(c) 1999 - 2010 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 8da8eb5..303e7bd 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 204177d..3103f41 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 5383405..b49bd6b 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 688b8ca..21f158f 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 27f3214..dfff0ff 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c
index a156228..9aea4f0 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.c
+++ b/drivers/net/ixgbe/ixgbe_dcb.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb.h b/drivers/net/ixgbe/ixgbe_dcb.h
index 64a9fa1..5caafd4 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.h
+++ b/drivers/net/ixgbe/ixgbe_dcb.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c
index f302638..f0e9279 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ixgbe/ixgbe_dcb_82598.h
index ebbe53c..cc728fa 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.h
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c
index ec8a252..4f7a26a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ixgbe/ixgbe_dcb_82599.h
index 9e5e282..0f3f791 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.h
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 3c7a79a..56f37f6 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 0bd49d3..d77961f 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index da32a10..e9a20c8 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h
index de8ff53..abf4b2b 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ixgbe/ixgbe_fcoe.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 2ad754c..9c9202f 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -52,7 +52,7 @@
#define DRV_VERSION "2.0.44-k2"
const char ixgbe_driver_version[] = DRV_VERSION;
-static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
+static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation.";
static const struct ixgbe_info *ixgbe_info_tbl[] = {
[board_82598] = &ixgbe_82598_info,
@@ -5576,6 +5576,10 @@
struct ixgbe_adapter *adapter = netdev_priv(netdev);
int i;
+ /* if interface is down do nothing */
+ if (test_bit(__IXGBE_DOWN, &adapter->state))
+ return;
+
adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 9ecad17..1c1efd3 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index 9b700f5..9cf5f3b 100644
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 84650c6..9eafddf 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 683353b..0d4eba7 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -142,8 +142,9 @@
if (spins != 0) {
--spins;
udelay(1);
- } else
- schedule();
+ } else {
+ schedule_timeout_uninterruptible(1);
+ }
time = get_seconds();
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index af39335..250c882 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -79,10 +79,14 @@
static int efx_test_mdio(struct efx_nic *efx, struct efx_self_tests *tests)
{
int rc = 0;
- int devad = __ffs(efx->mdio.mmds);
+ int devad;
u16 physid1, physid2;
- if (efx->phy_type == PHY_TYPE_NONE)
+ if (efx->mdio.mode_support & MDIO_SUPPORTS_C45)
+ devad = __ffs(efx->mdio.mmds);
+ else if (efx->mdio.mode_support & MDIO_SUPPORTS_C22)
+ devad = MDIO_DEVAD_NONE;
+ else
return 0;
mutex_lock(&efx->mac_lock);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 3a74d21..7f82b02 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -4,7 +4,7 @@
* Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
* Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com)
* Copyright (C) 2004 Sun Microsystems Inc.
- * Copyright (C) 2005-2009 Broadcom Corporation.
+ * Copyright (C) 2005-2010 Broadcom Corporation.
*
* Firmware is:
* Derived from proprietary unpublished source code,
@@ -68,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.105"
-#define DRV_MODULE_RELDATE "December 2, 2009"
+#define DRV_MODULE_VERSION "3.106"
+#define DRV_MODULE_RELDATE "January 12, 2010"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -1037,7 +1037,11 @@
else
tp->phy_addr = 1;
- is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES;
+ if (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0)
+ is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES;
+ else
+ is_serdes = tr32(TG3_CPMU_PHY_STRAP) &
+ TG3_CPMU_PHY_STRAP_IS_SERDES;
if (is_serdes)
tp->phy_addr += 7;
} else
@@ -4693,8 +4697,9 @@
(*post_ptr)++;
if (unlikely(rx_std_posted >= tp->rx_std_max_post)) {
- u32 idx = *post_ptr % TG3_RX_RING_SIZE;
- tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, idx);
+ tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE;
+ tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG,
+ tpr->rx_std_prod_idx);
work_mask &= ~RXD_OPAQUE_RING_STD;
rx_std_posted = 0;
}
@@ -7742,7 +7747,7 @@
((u64) tpr->rx_std_mapping >> 32));
tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
((u64) tpr->rx_std_mapping & 0xffffffff));
- if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS))
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
NIC_SRAM_RX_BUFFER_DESC);
@@ -12122,7 +12127,8 @@
tp->phy_id = eeprom_phy_id;
if (eeprom_phy_serdes) {
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+ if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
tp->tg3_flags2 |= TG3_FLG2_MII_SERDES;
else
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
@@ -13384,6 +13390,11 @@
if (err)
return err;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+ (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0 ||
+ (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)))
+ return -ENOTSUPP;
+
/* Initialize data/descriptor byte/word swapping. */
val = tr32(GRC_MODE);
val &= GRC_MODE_HOST_STACKUP;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index cd30889..8a16791 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -4,6 +4,7 @@
* Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
* Copyright (C) 2001 Jeff Garzik (jgarzik@pobox.com)
* Copyright (C) 2004 Sun Microsystems Inc.
+ * Copyright (C) 2007-2010 Broadcom Corporation.
*/
#ifndef _T3_H
@@ -1054,6 +1055,8 @@
#define CPMU_MUTEX_REQ_DRIVER 0x00001000
#define TG3_CPMU_MUTEX_GNT 0x00003660
#define CPMU_MUTEX_GNT_DRIVER 0x00001000
+#define TG3_CPMU_PHY_STRAP 0x00003664
+#define TG3_CPMU_PHY_STRAP_IS_SERDES 0x00000020
/* 0x3664 --> 0x3800 unused */
/* Mbuf cluster free registers */
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 5d1c867..6a3f4da 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -97,7 +97,7 @@
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
int ret;
u16 val;
- u32 cksum, offset;
+ u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX;
/*
* Read values from EEPROM and store them in the capability structure
@@ -116,12 +116,38 @@
* Validate the checksum of the EEPROM date. There are some
* devices with invalid EEPROMs.
*/
- for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+ AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val);
+ if (val) {
+ eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) <<
+ AR5K_EEPROM_SIZE_ENDLOC_SHIFT;
+ AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val);
+ eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE;
+
+ /*
+ * Fail safe check to prevent stupid loops due
+ * to busted EEPROMs. XXX: This value is likely too
+ * big still, waiting on a better value.
+ */
+ if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) {
+ ATH5K_ERR(ah->ah_sc, "Invalid max custom EEPROM size: "
+ "%d (0x%04x) max expected: %d (0x%04x)\n",
+ eep_max, eep_max,
+ 3 * AR5K_EEPROM_INFO_MAX,
+ 3 * AR5K_EEPROM_INFO_MAX);
+ return -EIO;
+ }
+ }
+
+ for (cksum = 0, offset = 0; offset < eep_max; offset++) {
AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
cksum ^= val;
}
if (cksum != AR5K_EEPROM_INFO_CKSUM) {
- ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+ ATH5K_ERR(ah->ah_sc, "Invalid EEPROM "
+ "checksum: 0x%04x eep_max: 0x%04x (%s)\n",
+ cksum, eep_max,
+ eep_max == AR5K_EEPROM_INFO_MAX ?
+ "default size" : "custom size");
return -EIO;
}
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 0123f35..473a483 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -37,6 +37,14 @@
#define AR5K_EEPROM_RFKILL_POLARITY_S 1
#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */
+
+/* FLASH(EEPROM) Defines for AR531X chips */
+#define AR5K_EEPROM_SIZE_LOWER 0x1b /* size info -- lower */
+#define AR5K_EEPROM_SIZE_UPPER 0x1c /* size info -- upper */
+#define AR5K_EEPROM_SIZE_UPPER_MASK 0xfff0
+#define AR5K_EEPROM_SIZE_UPPER_SHIFT 4
+#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT 12
+
#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */
#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */
#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE)
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 03a1106..5774cea 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -25,7 +25,7 @@
config ATH9K_DEBUGFS
bool "Atheros ath9k debugging"
- depends on ATH9K
+ depends on ATH9K && DEBUG_FS
---help---
Say Y, if you need access to ath9k's statistics for
interrupts, rate control, etc.
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index e2cef2f..1597a42 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -33,11 +33,11 @@
/* Macro to expand scalars to 64-bit objects */
-#define ito64(x) (sizeof(x) == 8) ? \
+#define ito64(x) (sizeof(x) == 1) ? \
(((unsigned long long int)(x)) & (0xff)) : \
- (sizeof(x) == 16) ? \
+ (sizeof(x) == 2) ? \
(((unsigned long long int)(x)) & 0xffff) : \
- ((sizeof(x) == 32) ? \
+ ((sizeof(x) == 4) ? \
(((unsigned long long int)(x)) & 0xffffffff) : \
(unsigned long long int)(x))
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 484c5fd..9b4b8b5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -1961,7 +1961,7 @@
struct ieee80211_tx_info *info;
struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
u32 status = le32_to_cpu(tx_resp->u.status);
- int tid = MAX_TID_COUNT;
+ int uninitialized_var(tid);
int sta_id;
int freed;
u8 *qc = NULL;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 574d366..5461f10 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2344,6 +2344,21 @@
IWL_DEBUG_MAC80211(priv, "leave\n");
}
+static inline void iwl_set_no_assoc(struct iwl_priv *priv)
+{
+ priv->assoc_id = 0;
+ iwl_led_disassociate(priv);
+ /*
+ * inform the ucode that there is no longer an
+ * association and that no more packets should be
+ * sent
+ */
+ priv->staging_rxon.filter_flags &=
+ ~RXON_FILTER_ASSOC_MSK;
+ priv->staging_rxon.assoc_id = 0;
+ iwlcore_commit_rxon(priv);
+}
+
#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
void iwl_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -2475,20 +2490,8 @@
IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
if (!iwl_is_rfkill(priv))
priv->cfg->ops->lib->post_associate(priv);
- } else {
- priv->assoc_id = 0;
- iwl_led_disassociate(priv);
-
- /*
- * inform the ucode that there is no longer an
- * association and that no more packets should be
- * send
- */
- priv->staging_rxon.filter_flags &=
- ~RXON_FILTER_ASSOC_MSK;
- priv->staging_rxon.assoc_id = 0;
- iwlcore_commit_rxon(priv);
- }
+ } else
+ iwl_set_no_assoc(priv);
}
if (changes && iwl_is_associated(priv) && priv->assoc_id) {
@@ -2503,12 +2506,14 @@
}
}
- if ((changes & BSS_CHANGED_BEACON_ENABLED) &&
- vif->bss_conf.enable_beacon) {
- memcpy(priv->staging_rxon.bssid_addr,
- bss_conf->bssid, ETH_ALEN);
- memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
- iwlcore_config_ap(priv);
+ if (changes & BSS_CHANGED_BEACON_ENABLED) {
+ if (vif->bss_conf.enable_beacon) {
+ memcpy(priv->staging_rxon.bssid_addr,
+ bss_conf->bssid, ETH_ALEN);
+ memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+ iwlcore_config_ap(priv);
+ } else
+ iwl_set_no_assoc(priv);
}
mutex_unlock(&priv->mutex);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 165d1f6..3822cf5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -711,7 +711,7 @@
extern int iwl_queue_space(const struct iwl_queue *q);
static inline int iwl_queue_used(const struct iwl_queue *q, int i)
{
- return q->write_ptr > q->read_ptr ?
+ return q->write_ptr >= q->read_ptr ?
(i >= q->read_ptr && i < q->write_ptr) :
!(i < q->read_ptr && i >= q->write_ptr);
}
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 59d4915..59f9210 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3157,8 +3157,10 @@
/* Clear unsupported feature flags */
*total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC;
- if (mwl8k_fw_lock(hw))
+ if (mwl8k_fw_lock(hw)) {
+ kfree(cmd);
return;
+ }
if (priv->sniffer_enabled) {
mwl8k_enable_sniffer(hw, 0);
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 27bf887..9deae41 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -340,7 +340,7 @@
rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off);
rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
- rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12);
+ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3);
rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 4d841c0..dcfc8c2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -113,6 +113,12 @@
( ((unsigned long)((__skb)->data + (__header))) & 3 )
/*
+ * Constants for extra TX headroom for alignment purposes.
+ */
+#define RT2X00_ALIGN_SIZE 4 /* Only whole frame needs alignment */
+#define RT2X00_L2PAD_SIZE 8 /* Both header & payload need alignment */
+
+/*
* Standard timing and size defines.
* These values should follow the ieee80211 specifications.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 06c43ca..265e66d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -686,7 +686,17 @@
/*
* Initialize extra TX headroom required.
*/
- rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom;
+ rt2x00dev->hw->extra_tx_headroom =
+ max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
+ rt2x00dev->ops->extra_tx_headroom);
+
+ /*
+ * Take TX headroom required for alignment into account.
+ */
+ if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+ rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
+ else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
+ rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
/*
* Register HW.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 239afc7..9915a09 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -104,7 +104,7 @@
* is also mapped to the DMA so it can be used for transfering
* additional descriptor information to the hardware.
*/
- skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
+ skb_push(skb, rt2x00dev->ops->extra_tx_headroom);
skbdesc->skb_dma =
dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
@@ -112,7 +112,7 @@
/*
* Restore data pointer to original location again.
*/
- skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);
+ skb_pull(skb, rt2x00dev->ops->extra_tx_headroom);
skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
}
@@ -134,7 +134,7 @@
* by the driver, but it was actually mapped to DMA.
*/
dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
- skb->len + rt2x00dev->hw->extra_tx_headroom,
+ skb->len + rt2x00dev->ops->extra_tx_headroom,
DMA_TO_DEVICE);
skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
}
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 8ebf5c3..f14deb0 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -987,12 +987,13 @@
changed_flags &= SUPPORTED_FIF_FLAGS;
*new_flags &= SUPPORTED_FIF_FLAGS;
- /* changed_flags is always populated but this driver
- * doesn't support all FIF flags so its possible we don't
- * need to do anything */
- if (!changed_flags)
- return;
-
+ /*
+ * If multicast parameter (as returned by zd_op_prepare_multicast)
+ * has changed, no bit in changed_flags is set. To handle this
+ * situation, we do not return if changed_flags is 0. If we do so,
+ * we will have some issue with IPv6 which uses multicast for link
+ * layer address resolution.
+ */
if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI))
zd_mc_add_all(&hash);
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 0264b11..c256aac 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -7,6 +7,9 @@
*
* Copyright 2006 (c) MontaVista Software, Inc.
*
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Copyright 2010 (c) ST-Ericsson AB
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -18,6 +21,9 @@
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/io.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/version.h>
/*
* Register definitions
@@ -30,35 +36,207 @@
#define RTC_RIS 0x14 /* Raw interrupt status register */
#define RTC_MIS 0x18 /* Masked interrupt status register */
#define RTC_ICR 0x1c /* Interrupt clear register */
+/* ST variants have additional timer functionality */
+#define RTC_TDR 0x20 /* Timer data read register */
+#define RTC_TLR 0x24 /* Timer data load register */
+#define RTC_TCR 0x28 /* Timer control register */
+#define RTC_YDR 0x30 /* Year data read register */
+#define RTC_YMR 0x34 /* Year match register */
+#define RTC_YLR 0x38 /* Year data load register */
+
+#define RTC_CR_CWEN (1 << 26) /* Clockwatch enable bit */
+
+#define RTC_TCR_EN (1 << 1) /* Periodic timer enable bit */
+
+/* Common bit definitions for Interrupt status and control registers */
+#define RTC_BIT_AI (1 << 0) /* Alarm interrupt bit */
+#define RTC_BIT_PI (1 << 1) /* Periodic interrupt bit. ST variants only. */
+
+/* Common bit definations for ST v2 for reading/writing time */
+#define RTC_SEC_SHIFT 0
+#define RTC_SEC_MASK (0x3F << RTC_SEC_SHIFT) /* Second [0-59] */
+#define RTC_MIN_SHIFT 6
+#define RTC_MIN_MASK (0x3F << RTC_MIN_SHIFT) /* Minute [0-59] */
+#define RTC_HOUR_SHIFT 12
+#define RTC_HOUR_MASK (0x1F << RTC_HOUR_SHIFT) /* Hour [0-23] */
+#define RTC_WDAY_SHIFT 17
+#define RTC_WDAY_MASK (0x7 << RTC_WDAY_SHIFT) /* Day of Week [1-7] 1=Sunday */
+#define RTC_MDAY_SHIFT 20
+#define RTC_MDAY_MASK (0x1F << RTC_MDAY_SHIFT) /* Day of Month [1-31] */
+#define RTC_MON_SHIFT 25
+#define RTC_MON_MASK (0xF << RTC_MON_SHIFT) /* Month [1-12] 1=January */
+
+#define RTC_TIMER_FREQ 32768
struct pl031_local {
struct rtc_device *rtc;
void __iomem *base;
+ u8 hw_designer;
+ u8 hw_revision:4;
};
-static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+static int pl031_alarm_irq_enable(struct device *dev,
+ unsigned int enabled)
{
- struct rtc_device *rtc = dev_id;
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ unsigned long imsc;
- rtc_update_irq(rtc, 1, RTC_AF);
+ /* Clear any pending alarm interrupts. */
+ writel(RTC_BIT_AI, ldata->base + RTC_ICR);
- return IRQ_HANDLED;
+ imsc = readl(ldata->base + RTC_IMSC);
+
+ if (enabled == 1)
+ writel(imsc | RTC_BIT_AI, ldata->base + RTC_IMSC);
+ else
+ writel(imsc & ~RTC_BIT_AI, ldata->base + RTC_IMSC);
+
+ return 0;
}
-static int pl031_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+/*
+ * Convert Gregorian date to ST v2 RTC format.
+ */
+static int pl031_stv2_tm_to_time(struct device *dev,
+ struct rtc_time *tm, unsigned long *st_time,
+ unsigned long *bcd_year)
+{
+ int year = tm->tm_year + 1900;
+ int wday = tm->tm_wday;
+
+ /* wday masking is not working in hardware so wday must be valid */
+ if (wday < -1 || wday > 6) {
+ dev_err(dev, "invalid wday value %d\n", tm->tm_wday);
+ return -EINVAL;
+ } else if (wday == -1) {
+ /* wday is not provided, calculate it here */
+ unsigned long time;
+ struct rtc_time calc_tm;
+
+ rtc_tm_to_time(tm, &time);
+ rtc_time_to_tm(time, &calc_tm);
+ wday = calc_tm.tm_wday;
+ }
+
+ *bcd_year = (bin2bcd(year % 100) | bin2bcd(year / 100) << 8);
+
+ *st_time = ((tm->tm_mon + 1) << RTC_MON_SHIFT)
+ | (tm->tm_mday << RTC_MDAY_SHIFT)
+ | ((wday + 1) << RTC_WDAY_SHIFT)
+ | (tm->tm_hour << RTC_HOUR_SHIFT)
+ | (tm->tm_min << RTC_MIN_SHIFT)
+ | (tm->tm_sec << RTC_SEC_SHIFT);
+
+ return 0;
+}
+
+/*
+ * Convert ST v2 RTC format to Gregorian date.
+ */
+static int pl031_stv2_time_to_tm(unsigned long st_time, unsigned long bcd_year,
+ struct rtc_time *tm)
+{
+ tm->tm_year = bcd2bin(bcd_year) + (bcd2bin(bcd_year >> 8) * 100);
+ tm->tm_mon = ((st_time & RTC_MON_MASK) >> RTC_MON_SHIFT) - 1;
+ tm->tm_mday = ((st_time & RTC_MDAY_MASK) >> RTC_MDAY_SHIFT);
+ tm->tm_wday = ((st_time & RTC_WDAY_MASK) >> RTC_WDAY_SHIFT) - 1;
+ tm->tm_hour = ((st_time & RTC_HOUR_MASK) >> RTC_HOUR_SHIFT);
+ tm->tm_min = ((st_time & RTC_MIN_MASK) >> RTC_MIN_SHIFT);
+ tm->tm_sec = ((st_time & RTC_SEC_MASK) >> RTC_SEC_SHIFT);
+
+ tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+ tm->tm_year -= 1900;
+
+ return 0;
+}
+
+static int pl031_stv2_read_time(struct device *dev, struct rtc_time *tm)
{
struct pl031_local *ldata = dev_get_drvdata(dev);
- switch (cmd) {
- case RTC_AIE_OFF:
- writel(1, ldata->base + RTC_MIS);
- return 0;
- case RTC_AIE_ON:
- writel(0, ldata->base + RTC_MIS);
- return 0;
+ pl031_stv2_time_to_tm(readl(ldata->base + RTC_DR),
+ readl(ldata->base + RTC_YDR), tm);
+
+ return 0;
+}
+
+static int pl031_stv2_set_time(struct device *dev, struct rtc_time *tm)
+{
+ unsigned long time;
+ unsigned long bcd_year;
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pl031_stv2_tm_to_time(dev, tm, &time, &bcd_year);
+ if (ret == 0) {
+ writel(bcd_year, ldata->base + RTC_YLR);
+ writel(time, ldata->base + RTC_LR);
}
- return -ENOIOCTLCMD;
+ return ret;
+}
+
+static int pl031_stv2_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pl031_stv2_time_to_tm(readl(ldata->base + RTC_MR),
+ readl(ldata->base + RTC_YMR), &alarm->time);
+
+ alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+ alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
+
+ return ret;
+}
+
+static int pl031_stv2_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ unsigned long time;
+ unsigned long bcd_year;
+ int ret;
+
+ /* At the moment, we can only deal with non-wildcarded alarm times. */
+ ret = rtc_valid_tm(&alarm->time);
+ if (ret == 0) {
+ ret = pl031_stv2_tm_to_time(dev, &alarm->time,
+ &time, &bcd_year);
+ if (ret == 0) {
+ writel(bcd_year, ldata->base + RTC_YMR);
+ writel(time, ldata->base + RTC_MR);
+
+ pl031_alarm_irq_enable(dev, alarm->enabled);
+ }
+ }
+
+ return ret;
+}
+
+static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+{
+ struct pl031_local *ldata = dev_id;
+ unsigned long rtcmis;
+ unsigned long events = 0;
+
+ rtcmis = readl(ldata->base + RTC_MIS);
+ if (rtcmis) {
+ writel(rtcmis, ldata->base + RTC_ICR);
+
+ if (rtcmis & RTC_BIT_AI)
+ events |= (RTC_AF | RTC_IRQF);
+
+ /* Timer interrupt is only available in ST variants */
+ if ((rtcmis & RTC_BIT_PI) &&
+ (ldata->hw_designer == AMBA_VENDOR_ST))
+ events |= (RTC_PF | RTC_IRQF);
+
+ rtc_update_irq(ldata->rtc, 1, events);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
}
static int pl031_read_time(struct device *dev, struct rtc_time *tm)
@@ -74,11 +252,14 @@
{
unsigned long time;
struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
- rtc_tm_to_time(tm, &time);
- writel(time, ldata->base + RTC_LR);
+ ret = rtc_tm_to_time(tm, &time);
- return 0;
+ if (ret == 0)
+ writel(time, ldata->base + RTC_LR);
+
+ return ret;
}
static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
@@ -86,8 +267,9 @@
struct pl031_local *ldata = dev_get_drvdata(dev);
rtc_time_to_tm(readl(ldata->base + RTC_MR), &alarm->time);
- alarm->pending = readl(ldata->base + RTC_RIS);
- alarm->enabled = readl(ldata->base + RTC_IMSC);
+
+ alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+ alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
return 0;
}
@@ -96,22 +278,71 @@
{
struct pl031_local *ldata = dev_get_drvdata(dev);
unsigned long time;
+ int ret;
- rtc_tm_to_time(&alarm->time, &time);
+ /* At the moment, we can only deal with non-wildcarded alarm times. */
+ ret = rtc_valid_tm(&alarm->time);
+ if (ret == 0) {
+ ret = rtc_tm_to_time(&alarm->time, &time);
+ if (ret == 0) {
+ writel(time, ldata->base + RTC_MR);
+ pl031_alarm_irq_enable(dev, alarm->enabled);
+ }
+ }
- writel(time, ldata->base + RTC_MR);
- writel(!alarm->enabled, ldata->base + RTC_MIS);
+ return ret;
+}
+
+/* Periodic interrupt is only available in ST variants. */
+static int pl031_irq_set_state(struct device *dev, int enabled)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+
+ if (enabled == 1) {
+ /* Clear any pending timer interrupt. */
+ writel(RTC_BIT_PI, ldata->base + RTC_ICR);
+
+ writel(readl(ldata->base + RTC_IMSC) | RTC_BIT_PI,
+ ldata->base + RTC_IMSC);
+
+ /* Now start the timer */
+ writel(readl(ldata->base + RTC_TCR) | RTC_TCR_EN,
+ ldata->base + RTC_TCR);
+
+ } else {
+ writel(readl(ldata->base + RTC_IMSC) & (~RTC_BIT_PI),
+ ldata->base + RTC_IMSC);
+
+ /* Also stop the timer */
+ writel(readl(ldata->base + RTC_TCR) & (~RTC_TCR_EN),
+ ldata->base + RTC_TCR);
+ }
+ /* Wait at least 1 RTC32 clock cycle to ensure next access
+ * to RTC_TCR will succeed.
+ */
+ udelay(40);
return 0;
}
-static const struct rtc_class_ops pl031_ops = {
- .ioctl = pl031_ioctl,
- .read_time = pl031_read_time,
- .set_time = pl031_set_time,
- .read_alarm = pl031_read_alarm,
- .set_alarm = pl031_set_alarm,
-};
+static int pl031_irq_set_freq(struct device *dev, int freq)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+
+ /* Cant set timer if it is already enabled */
+ if (readl(ldata->base + RTC_TCR) & RTC_TCR_EN) {
+ dev_err(dev, "can't change frequency while timer enabled\n");
+ return -EINVAL;
+ }
+
+ /* If self start bit in RTC_TCR is set timer will start here,
+ * but we never set that bit. Instead we start the timer when
+ * set_state is called with enabled == 1.
+ */
+ writel(RTC_TIMER_FREQ / freq, ldata->base + RTC_TLR);
+
+ return 0;
+}
static int pl031_remove(struct amba_device *adev)
{
@@ -131,18 +362,20 @@
{
int ret;
struct pl031_local *ldata;
+ struct rtc_class_ops *ops = id->data;
ret = amba_request_regions(adev, NULL);
if (ret)
goto err_req;
- ldata = kmalloc(sizeof(struct pl031_local), GFP_KERNEL);
+ ldata = kzalloc(sizeof(struct pl031_local), GFP_KERNEL);
if (!ldata) {
ret = -ENOMEM;
goto out;
}
ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
+
if (!ldata->base) {
ret = -ENOMEM;
goto out_no_remap;
@@ -150,24 +383,36 @@
amba_set_drvdata(adev, ldata);
- if (request_irq(adev->irq[0], pl031_interrupt, IRQF_DISABLED,
- "rtc-pl031", ldata->rtc)) {
- ret = -EIO;
- goto out_no_irq;
- }
+ ldata->hw_designer = amba_manf(adev);
+ ldata->hw_revision = amba_rev(adev);
- ldata->rtc = rtc_device_register("pl031", &adev->dev, &pl031_ops,
- THIS_MODULE);
+ dev_dbg(&adev->dev, "designer ID = 0x%02x\n", ldata->hw_designer);
+ dev_dbg(&adev->dev, "revision = 0x%01x\n", ldata->hw_revision);
+
+ /* Enable the clockwatch on ST Variants */
+ if ((ldata->hw_designer == AMBA_VENDOR_ST) &&
+ (ldata->hw_revision > 1))
+ writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN,
+ ldata->base + RTC_CR);
+
+ ldata->rtc = rtc_device_register("pl031", &adev->dev, ops,
+ THIS_MODULE);
if (IS_ERR(ldata->rtc)) {
ret = PTR_ERR(ldata->rtc);
goto out_no_rtc;
}
+ if (request_irq(adev->irq[0], pl031_interrupt,
+ IRQF_DISABLED | IRQF_SHARED, "rtc-pl031", ldata)) {
+ ret = -EIO;
+ goto out_no_irq;
+ }
+
return 0;
-out_no_rtc:
- free_irq(adev->irq[0], ldata->rtc);
out_no_irq:
+ rtc_device_unregister(ldata->rtc);
+out_no_rtc:
iounmap(ldata->base);
amba_set_drvdata(adev, NULL);
out_no_remap:
@@ -175,13 +420,57 @@
out:
amba_release_regions(adev);
err_req:
+
return ret;
}
+/* Operations for the original ARM version */
+static struct rtc_class_ops arm_pl031_ops = {
+ .read_time = pl031_read_time,
+ .set_time = pl031_set_time,
+ .read_alarm = pl031_read_alarm,
+ .set_alarm = pl031_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+};
+
+/* The First ST derivative */
+static struct rtc_class_ops stv1_pl031_ops = {
+ .read_time = pl031_read_time,
+ .set_time = pl031_set_time,
+ .read_alarm = pl031_read_alarm,
+ .set_alarm = pl031_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+ .irq_set_state = pl031_irq_set_state,
+ .irq_set_freq = pl031_irq_set_freq,
+};
+
+/* And the second ST derivative */
+static struct rtc_class_ops stv2_pl031_ops = {
+ .read_time = pl031_stv2_read_time,
+ .set_time = pl031_stv2_set_time,
+ .read_alarm = pl031_stv2_read_alarm,
+ .set_alarm = pl031_stv2_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+ .irq_set_state = pl031_irq_set_state,
+ .irq_set_freq = pl031_irq_set_freq,
+};
+
static struct amba_id pl031_ids[] __initdata = {
{
.id = 0x00041031,
.mask = 0x000fffff,
+ .data = &arm_pl031_ops,
+ },
+ /* ST Micro variants */
+ {
+ .id = 0x00180031,
+ .mask = 0x00ffffff,
+ .data = &stv1_pl031_ops,
+ },
+ {
+ .id = 0x00280031,
+ .mask = 0x00ffffff,
+ .data = &stv2_pl031_ops,
},
{0, 0},
};
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 5819dc0..1c500c4 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -23,6 +23,7 @@
#include <asm/debug.h>
#include <asm/idals.h>
#include <asm/ebcdic.h>
+#include <asm/compat.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
@@ -2844,13 +2845,16 @@
rc = -EFAULT;
if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
goto out;
-#ifndef CONFIG_64BIT
- /* Make sure pointers are sane even on 31 bit. */
- if ((usrparm.psf_data >> 32) != 0 || (usrparm.rssd_result >> 32) != 0) {
+ if (is_compat_task() || sizeof(long) == 4) {
+ /* Make sure pointers are sane even on 31 bit. */
rc = -EINVAL;
- goto out;
+ if ((usrparm.psf_data >> 32) != 0)
+ goto out;
+ if ((usrparm.rssd_result >> 32) != 0)
+ goto out;
+ usrparm.psf_data &= 0x7fffffffULL;
+ usrparm.rssd_result &= 0x7fffffffULL;
}
-#endif
/* alloc I/O data area */
psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA);
rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA);
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 478bcdb..fc7b30b 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -17,7 +17,7 @@
#include <linux/fs.h>
#include <linux/blkpg.h>
#include <linux/smp_lock.h>
-
+#include <asm/compat.h>
#include <asm/ccwdev.h>
#include <asm/cmb.h>
#include <asm/uaccess.h>
@@ -358,9 +358,8 @@
}
static int dasd_ioctl_readall_cmb(struct dasd_block *block, unsigned int cmd,
- unsigned long arg)
+ struct cmbdata __user *argp)
{
- struct cmbdata __user *argp = (void __user *) arg;
size_t size = _IOC_SIZE(cmd);
struct cmbdata data;
int ret;
@@ -376,7 +375,12 @@
unsigned int cmd, unsigned long arg)
{
struct dasd_block *block = bdev->bd_disk->private_data;
- void __user *argp = (void __user *)arg;
+ void __user *argp;
+
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (void __user *)arg;
if (!block)
return -ENODEV;
@@ -414,7 +418,7 @@
case BIODASDCMFDISABLE:
return disable_cmf(block->base->cdev);
case BIODASDREADALLCMB:
- return dasd_ioctl_readall_cmb(block, cmd, arg);
+ return dasd_ioctl_readall_cmb(block, cmd, argp);
default:
/* if the discipline has an ioctl method try it. */
if (block->base->discipline->ioctl) {
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 9d61683..59ec073 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -1037,22 +1037,6 @@
}
/*
- * Currently we don't have any io controls for 3215 ttys
- */
-static int tty3215_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- switch (cmd) {
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-/*
* Disable reading from a 3215 tty
*/
static void tty3215_throttle(struct tty_struct * tty)
@@ -1117,7 +1101,6 @@
.write_room = tty3215_write_room,
.chars_in_buffer = tty3215_chars_in_buffer,
.flush_buffer = tty3215_flush_buffer,
- .ioctl = tty3215_ioctl,
.throttle = tty3215_throttle,
.unthrottle = tty3215_unthrottle,
.stop = tty3215_stop,
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index 247b2b9..31c59b0 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -15,6 +15,7 @@
#include <linux/types.h>
#include <linux/smp_lock.h>
+#include <asm/compat.h>
#include <asm/ccwdev.h>
#include <asm/cio.h>
#include <asm/ebcdic.h>
@@ -322,6 +323,7 @@
static long
fs3270_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
+ char __user *argp;
struct fs3270 *fp;
struct raw3270_iocb iocb;
int rc;
@@ -329,6 +331,10 @@
fp = filp->private_data;
if (!fp)
return -ENODEV;
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (char __user *)arg;
rc = 0;
mutex_lock(&fs3270_mutex);
switch (cmd) {
@@ -339,10 +345,10 @@
fp->write_command = arg;
break;
case TUBGETI:
- rc = put_user(fp->read_command, (char __user *) arg);
+ rc = put_user(fp->read_command, argp);
break;
case TUBGETO:
- rc = put_user(fp->write_command,(char __user *) arg);
+ rc = put_user(fp->write_command, argp);
break;
case TUBGETMOD:
iocb.model = fp->view.model;
@@ -351,8 +357,7 @@
iocb.pf_cnt = 24;
iocb.re_cnt = 20;
iocb.map = 0;
- if (copy_to_user((char __user *) arg, &iocb,
- sizeof(struct raw3270_iocb)))
+ if (copy_to_user(argp, &iocb, sizeof(struct raw3270_iocb)))
rc = -EFAULT;
break;
}
@@ -511,8 +516,8 @@
.write = fs3270_write, /* write */
.unlocked_ioctl = fs3270_ioctl, /* ioctl */
.compat_ioctl = fs3270_ioctl, /* ioctl */
- .open = fs3270_open, /* open */
- .release = fs3270_close, /* release */
+ .open = fs3270_open, /* open */
+ .release = fs3270_close, /* release */
};
/*
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 96816149..8d3d720 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -46,8 +46,6 @@
*/
static int tapeblock_open(struct block_device *, fmode_t);
static int tapeblock_release(struct gendisk *, fmode_t);
-static int tapeblock_ioctl(struct block_device *, fmode_t, unsigned int,
- unsigned long);
static int tapeblock_medium_changed(struct gendisk *);
static int tapeblock_revalidate_disk(struct gendisk *);
@@ -55,7 +53,6 @@
.owner = THIS_MODULE,
.open = tapeblock_open,
.release = tapeblock_release,
- .ioctl = tapeblock_ioctl,
.media_changed = tapeblock_medium_changed,
.revalidate_disk = tapeblock_revalidate_disk,
};
@@ -416,42 +413,6 @@
}
/*
- * Support of some generic block device IOCTLs.
- */
-static int
-tapeblock_ioctl(
- struct block_device * bdev,
- fmode_t mode,
- unsigned int command,
- unsigned long arg
-) {
- int rc;
- int minor;
- struct gendisk *disk = bdev->bd_disk;
- struct tape_device *device;
-
- rc = 0;
- BUG_ON(!disk);
- device = disk->private_data;
- BUG_ON(!device);
- minor = MINOR(bdev->bd_dev);
-
- DBF_LH(6, "tapeblock_ioctl(0x%0x)\n", command);
- DBF_LH(6, "device = %d:%d\n", tapeblock_major, minor);
-
- switch (command) {
- /* Refuse some IOCTL calls without complaining (mount). */
- case 0x5310: /* CDROMMULTISESSION */
- rc = -EINVAL;
- break;
- default:
- rc = -EINVAL;
- }
-
- return rc;
-}
-
-/*
* Initialize block device frontend.
*/
int
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index 2125ec7..539045a 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -18,6 +18,7 @@
#include <linux/proc_fs.h>
#include <linux/mtio.h>
#include <linux/smp_lock.h>
+#include <linux/compat.h>
#include <asm/uaccess.h>
@@ -37,8 +38,9 @@
static int tapechar_open(struct inode *,struct file *);
static int tapechar_release(struct inode *,struct file *);
static long tapechar_ioctl(struct file *, unsigned int, unsigned long);
-static long tapechar_compat_ioctl(struct file *, unsigned int,
- unsigned long);
+#ifdef CONFIG_COMPAT
+static long tapechar_compat_ioctl(struct file *, unsigned int, unsigned long);
+#endif
static const struct file_operations tape_fops =
{
@@ -46,7 +48,9 @@
.read = tapechar_read,
.write = tapechar_write,
.unlocked_ioctl = tapechar_ioctl,
+#ifdef CONFIG_COMPAT
.compat_ioctl = tapechar_compat_ioctl,
+#endif
.open = tapechar_open,
.release = tapechar_release,
};
@@ -457,15 +461,22 @@
return rc;
}
+#ifdef CONFIG_COMPAT
static long
tapechar_compat_ioctl(struct file *filp, unsigned int no, unsigned long data)
{
struct tape_device *device = filp->private_data;
int rval = -ENOIOCTLCMD;
+ unsigned long argp;
+ /* The 'arg' argument of any ioctl function may only be used for
+ * pointers because of the compat pointer conversion.
+ * Consider this when adding new ioctls.
+ */
+ argp = (unsigned long) compat_ptr(data);
if (device->discipline->ioctl_fn) {
mutex_lock(&device->mutex);
- rval = device->discipline->ioctl_fn(device, no, data);
+ rval = device->discipline->ioctl_fn(device, no, argp);
mutex_unlock(&device->mutex);
if (rval == -EINVAL)
rval = -ENOIOCTLCMD;
@@ -473,6 +484,7 @@
return rval;
}
+#endif /* CONFIG_COMPAT */
/*
* Initialize character device frontend.
diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c
index a6087ce..921dcda 100644
--- a/drivers/s390/char/vmcp.c
+++ b/drivers/s390/char/vmcp.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
+#include <asm/compat.h>
#include <asm/cpcmd.h>
#include <asm/debug.h>
#include <asm/uaccess.h>
@@ -139,21 +140,26 @@
static long vmcp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct vmcp_session *session;
+ int __user *argp;
int temp;
session = (struct vmcp_session *)file->private_data;
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (int __user *)arg;
if (mutex_lock_interruptible(&session->mutex))
return -ERESTARTSYS;
switch (cmd) {
case VMCP_GETCODE:
temp = session->resp_code;
mutex_unlock(&session->mutex);
- return put_user(temp, (int __user *)arg);
+ return put_user(temp, argp);
case VMCP_SETBUF:
free_pages((unsigned long)session->response,
get_order(session->bufsize));
session->response=NULL;
- temp = get_user(session->bufsize, (int __user *)arg);
+ temp = get_user(session->bufsize, argp);
if (get_order(session->bufsize) > 8) {
session->bufsize = PAGE_SIZE;
temp = -EINVAL;
@@ -163,7 +169,7 @@
case VMCP_GETSIZE:
temp = session->resp_size;
mutex_unlock(&session->mutex);
- return put_user(temp, (int __user *)arg);
+ return put_user(temp, argp);
default:
mutex_unlock(&session->mutex);
return -ENOIOCTLCMD;
diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c
index cc5144b..c84ac94 100644
--- a/drivers/s390/cio/chsc_sch.c
+++ b/drivers/s390/cio/chsc_sch.c
@@ -12,6 +12,7 @@
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
+#include <asm/compat.h>
#include <asm/cio.h>
#include <asm/chsc.h>
#include <asm/isc.h>
@@ -770,24 +771,30 @@
static long chsc_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
+ void __user *argp;
+
CHSC_MSG(2, "chsc_ioctl called, cmd=%x\n", cmd);
+ if (is_compat_task())
+ argp = compat_ptr(arg);
+ else
+ argp = (void __user *)arg;
switch (cmd) {
case CHSC_START:
- return chsc_ioctl_start((void __user *)arg);
+ return chsc_ioctl_start(argp);
case CHSC_INFO_CHANNEL_PATH:
- return chsc_ioctl_info_channel_path((void __user *)arg);
+ return chsc_ioctl_info_channel_path(argp);
case CHSC_INFO_CU:
- return chsc_ioctl_info_cu((void __user *)arg);
+ return chsc_ioctl_info_cu(argp);
case CHSC_INFO_SCH_CU:
- return chsc_ioctl_info_sch_cu((void __user *)arg);
+ return chsc_ioctl_info_sch_cu(argp);
case CHSC_INFO_CI:
- return chsc_ioctl_conf_info((void __user *)arg);
+ return chsc_ioctl_conf_info(argp);
case CHSC_INFO_CCL:
- return chsc_ioctl_conf_comp_list((void __user *)arg);
+ return chsc_ioctl_conf_comp_list(argp);
case CHSC_INFO_CPD:
- return chsc_ioctl_chpd((void __user *)arg);
+ return chsc_ioctl_chpd(argp);
case CHSC_INFO_DCAL:
- return chsc_ioctl_dcal((void __user *)arg);
+ return chsc_ioctl_dcal(argp);
default: /* unknown ioctl number */
return -ENOIOCTLCMD;
}
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index 0d4d18b..c68be24 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -393,10 +393,12 @@
* u_mult_inv > 128 bytes.
*/
if (copied == 0) {
- int len;
+ unsigned int len;
spin_unlock_bh(&zcrypt_device_lock);
/* len is max 256 / 2 - 120 = 8 */
len = crt->inputdatalength / 2 - 120;
+ if (len > sizeof(z1))
+ return -EFAULT;
z1 = z2 = z3 = 0;
if (copy_from_user(&z1, crt->np_prime, len) ||
copy_from_user(&z2, crt->bp_key, len) ||
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 36ede02..b5496a1 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -354,6 +354,8 @@
{ "FUJ02E5", 0 },
/* Fujitsu P-series tablet PC device */
{ "FUJ02E6", 0 },
+ /* Fujitsu Wacom 2FGT Tablet PC device */
+ { "FUJ02E7", 0 },
/*
* LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
* disguise)
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 0700cd1..683e66f 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -411,6 +411,17 @@
goto ack_tx_int;
}
+ /* Under some circumstances, we see interrupts reported for
+ * a closed channel. The interrupt mask in R1 is clear, but
+ * R3 still signals the interrupts and we see them when taking
+ * an interrupt for the other channel (this could be a qemu
+ * bug but since the ESCC doc doesn't specify precsiely whether
+ * R3 interrup status bits are masked by R1 interrupt enable
+ * bits, better safe than sorry). --BenH.
+ */
+ if (!ZS_IS_OPEN(uap))
+ goto ack_tx_int;
+
if (uap->port.x_char) {
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
write_zsdata(uap, uap->port.x_char);
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 37f0de9..42f3333 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1052,7 +1052,18 @@
sci_port->port.ops = &sci_uart_ops;
sci_port->port.iotype = UPIO_MEM;
sci_port->port.line = index;
- sci_port->port.fifosize = 1;
+
+ switch (p->type) {
+ case PORT_SCIFA:
+ sci_port->port.fifosize = 64;
+ break;
+ case PORT_SCIF:
+ sci_port->port.fifosize = 16;
+ break;
+ default:
+ sci_port->port.fifosize = 1;
+ break;
+ }
if (dev) {
sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index ff5bbb9..9aeb681 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -363,6 +363,7 @@
void *rx_end;
enum ssp_reading read;
enum ssp_writing write;
+ u32 exp_fifo_level;
};
/**
@@ -501,6 +502,9 @@
while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
readw(SSP_DR(pl022->virtbase));
} while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+
+ pl022->exp_fifo_level = 0;
+
return limit;
}
@@ -583,10 +587,9 @@
* errons in 8bit wide transfers on ARM variants (just 8 words
* FIFO, means only 8x8 = 64 bits in FIFO) at least.
*
- * FIXME: currently we have no logic to account for this.
- * perhaps there is even something broken in HW regarding
- * 8bit transfers (it doesn't fail on 16bit) so this needs
- * more investigation...
+ * To prevent this issue, the TX FIFO is only filled to the
+ * unused RX FIFO fill length, regardless of what the TX
+ * FIFO status flag indicates.
*/
dev_dbg(&pl022->adev->dev,
"%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
@@ -613,11 +616,12 @@
break;
}
pl022->rx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level--;
}
/*
- * Write as much as you can, while keeping an eye on the RX FIFO!
+ * Write as much as possible up to the RX FIFO size
*/
- while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+ while ((pl022->exp_fifo_level < pl022->vendor->fifodepth)
&& (pl022->tx < pl022->tx_end)) {
switch (pl022->write) {
case WRITING_NULL:
@@ -634,6 +638,7 @@
break;
}
pl022->tx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level++;
/*
* This inner reader takes care of things appearing in the RX
* FIFO as we're transmitting. This will happen a lot since the
@@ -660,6 +665,7 @@
break;
}
pl022->rx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level--;
}
}
/*
diff --git a/drivers/staging/cx25821/cx25821-medusa-video.c b/drivers/staging/cx25821/cx25821-medusa-video.c
index e4df813..1eb079b 100644
--- a/drivers/staging/cx25821/cx25821-medusa-video.c
+++ b/drivers/staging/cx25821/cx25821-medusa-video.c
@@ -860,10 +860,8 @@
ret_val = medusa_set_videostandard(dev);
- if (ret_val < 0) {
- mutex_unlock(&dev->lock);
+ if (ret_val < 0)
return -EINVAL;
- }
return 1;
}
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index adf9632..53cb722 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -211,21 +211,23 @@
/**
* s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
- * @id: window id.
* @sfb: The hardware state.
* @pixclock: The pixel clock wanted, in picoseconds.
*
* Given the specified pixel clock, work out the necessary divider to get
* close to the output frequency.
*/
-static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk)
+static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
{
- struct s3c_fb_pd_win *win = sfb->pdata->win[id];
unsigned long clk = clk_get_rate(sfb->bus_clk);
+ unsigned long long tmp;
unsigned int result;
- pixclk *= win->win_mode.refresh;
- result = clk / pixclk;
+ tmp = (unsigned long long)clk;
+ tmp *= pixclk;
+
+ do_div(tmp, 1000000000UL);
+ result = (unsigned int)tmp / 1000;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
pixclk, clk, result, clk / result);
@@ -301,7 +303,7 @@
/* use window 0 as the basis for the lcd output timings */
if (win_no == 0) {
- clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock);
+ clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
data = sfb->pdata->vidcon0;
data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
diff --git a/drivers/video/via/accel.c b/drivers/video/via/accel.c
index 9d4f3a4..d5077df 100644
--- a/drivers/video/via/accel.c
+++ b/drivers/video/via/accel.c
@@ -137,7 +137,7 @@
tmp, dst_pitch);
return -EINVAL;
}
- tmp = (tmp >> 3) | (dst_pitch << (16 - 3));
+ tmp = VIA_PITCH_ENABLE | (tmp >> 3) | (dst_pitch << (16 - 3));
writel(tmp, engine + 0x38);
if (op == VIA_BITBLT_FILL)
@@ -352,6 +352,9 @@
viapar->shared->vq_vram_addr = viapar->fbmem_free;
viapar->fbmem_used += VQ_SIZE;
+ /* Init 2D engine reg to reset 2D engine */
+ writel(0x0, engine + VIA_REG_KEYCONTROL);
+
/* Init AGP and VQ regs */
switch (chip_name) {
case UNICHROME_K8M890:
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index d8df17a..3028e7d 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -177,16 +177,15 @@
}
if (vmode_index != VIA_RES_INVALID) {
- viafb_setmode(vmode_index, info->var.xres, info->var.yres,
- info->var.bits_per_pixel, vmode_index1,
- viafb_second_xres, viafb_second_yres, viafb_bpp1);
-
viafb_update_fix(info);
viafb_bpp = info->var.bits_per_pixel;
if (info->var.accel_flags & FB_ACCELF_TEXT)
info->flags &= ~FBINFO_HWACCEL_DISABLED;
else
info->flags |= FBINFO_HWACCEL_DISABLED;
+ viafb_setmode(vmode_index, info->var.xres, info->var.yres,
+ info->var.bits_per_pixel, vmode_index1,
+ viafb_second_xres, viafb_second_yres, viafb_bpp1);
}
return 0;
@@ -872,7 +871,9 @@
if (info->flags & FBINFO_HWACCEL_DISABLED || info != viafbinfo)
return -ENODEV;
- if (chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2)
+ /* LCD ouput does not support hw cursors (at least on VN896) */
+ if ((chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2) ||
+ viafb_LCD_ON)
return -ENODEV;
viafb_show_hw_cursor(info, HW_Cursor_OFF);
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 9dd5880..505be88 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -266,7 +266,7 @@
static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST };
-static struct virtio_driver virtio_balloon = {
+static struct virtio_driver virtio_balloon_driver = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
@@ -279,12 +279,12 @@
static int __init init(void)
{
- return register_virtio_driver(&virtio_balloon);
+ return register_virtio_driver(&virtio_balloon_driver);
}
static void __exit fini(void)
{
- unregister_virtio_driver(&virtio_balloon);
+ unregister_virtio_driver(&virtio_balloon_driver);
}
module_init(init);
module_exit(fini);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index c8a3bec..4bdb7f1 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -29,8 +29,9 @@
* document number 313056-003, 313057-017: 82801H (ICH8)
* document number 316972-004, 316973-012: 82801I (ICH9)
* document number 319973-002, 319974-002: 82801J (ICH10)
- * document number 322169-001, 322170-001: 5 Series, 3400 Series (PCH)
+ * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
* document number 320066-003, 320257-008: EP80597 (IICH)
+ * document number TBD : Cougar Point (CPT)
*/
/*
@@ -100,8 +101,22 @@
TCO_ICH10DO, /* ICH10DO */
TCO_PCH, /* PCH Desktop Full Featured */
TCO_PCHM, /* PCH Mobile Full Featured */
+ TCO_P55, /* P55 */
+ TCO_PM55, /* PM55 */
+ TCO_H55, /* H55 */
+ TCO_QM57, /* QM57 */
+ TCO_H57, /* H57 */
+ TCO_HM55, /* HM55 */
+ TCO_Q57, /* Q57 */
+ TCO_HM57, /* HM57 */
TCO_PCHMSFF, /* PCH Mobile SFF Full Featured */
+ TCO_QS57, /* QS57 */
+ TCO_3400, /* 3400 */
+ TCO_3420, /* 3420 */
+ TCO_3450, /* 3450 */
TCO_EP80579, /* EP80579 */
+ TCO_CPTD, /* CPT Desktop */
+ TCO_CPTM, /* CPT Mobile */
};
static struct {
@@ -144,8 +159,22 @@
{"ICH10DO", 2},
{"PCH Desktop Full Featured", 2},
{"PCH Mobile Full Featured", 2},
+ {"P55", 2},
+ {"PM55", 2},
+ {"H55", 2},
+ {"QM57", 2},
+ {"H57", 2},
+ {"HM55", 2},
+ {"Q57", 2},
+ {"HM57", 2},
{"PCH Mobile SFF Full Featured", 2},
+ {"QS57", 2},
+ {"3400", 2},
+ {"3420", 2},
+ {"3450", 2},
{"EP80579", 2},
+ {"CPT Desktop", 2},
+ {"CPT Mobile", 2},
{NULL, 0}
};
@@ -216,8 +245,22 @@
{ ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)},
{ ITCO_PCI_DEVICE(0x3b00, TCO_PCH)},
{ ITCO_PCI_DEVICE(0x3b01, TCO_PCHM)},
+ { ITCO_PCI_DEVICE(0x3b02, TCO_P55)},
+ { ITCO_PCI_DEVICE(0x3b03, TCO_PM55)},
+ { ITCO_PCI_DEVICE(0x3b06, TCO_H55)},
+ { ITCO_PCI_DEVICE(0x3b07, TCO_QM57)},
+ { ITCO_PCI_DEVICE(0x3b08, TCO_H57)},
+ { ITCO_PCI_DEVICE(0x3b09, TCO_HM55)},
+ { ITCO_PCI_DEVICE(0x3b0a, TCO_Q57)},
+ { ITCO_PCI_DEVICE(0x3b0b, TCO_HM57)},
{ ITCO_PCI_DEVICE(0x3b0d, TCO_PCHMSFF)},
+ { ITCO_PCI_DEVICE(0x3b0f, TCO_QS57)},
+ { ITCO_PCI_DEVICE(0x3b12, TCO_3400)},
+ { ITCO_PCI_DEVICE(0x3b14, TCO_3420)},
+ { ITCO_PCI_DEVICE(0x3b16, TCO_3450)},
{ ITCO_PCI_DEVICE(0x5031, TCO_EP80579)},
+ { ITCO_PCI_DEVICE(0x1c42, TCO_CPTD)},
+ { ITCO_PCI_DEVICE(0x1c43, TCO_CPTM)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index c499793..5d42d55 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -102,15 +102,15 @@
goto out_thaw;
}
+ printk(KERN_DEBUG "suspending xenstore...\n");
+ xs_suspend();
+
err = dpm_suspend_noirq(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
goto out_resume;
}
- printk(KERN_DEBUG "suspending xenstore...\n");
- xs_suspend();
-
err = stop_machine(xen_suspend, &cancelled, cpumask_of(0));
dpm_resume_noirq(PMSG_RESUME);
@@ -120,13 +120,13 @@
cancelled = 1;
}
+out_resume:
if (!cancelled) {
xen_arch_resume();
xs_resume();
} else
xs_suspend_cancel();
-out_resume:
dpm_resume_end(PMSG_RESUME);
/* Make sure timer events get retriggered on all CPUs */
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 18f74ec..9d03d1e 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -1001,44 +1001,6 @@
}
/**
- * v9fs_vfs_readlink - read a symlink's location
- * @dentry: dentry for symlink
- * @buffer: buffer to load symlink location into
- * @buflen: length of buffer
- *
- */
-
-static int v9fs_vfs_readlink(struct dentry *dentry, char __user * buffer,
- int buflen)
-{
- int retval;
- int ret;
- char *link = __getname();
-
- if (unlikely(!link))
- return -ENOMEM;
-
- if (buflen > PATH_MAX)
- buflen = PATH_MAX;
-
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
- dentry);
-
- retval = v9fs_readlink(dentry, link, buflen);
-
- if (retval > 0) {
- if ((ret = copy_to_user(buffer, link, retval)) != 0) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "problem copying to user: %d\n", ret);
- retval = ret;
- }
- }
-
- __putname(link);
- return retval;
-}
-
-/**
* v9fs_vfs_follow_link - follow a symlink path
* @dentry: dentry for symlink
* @nd: nameidata
@@ -1230,7 +1192,6 @@
.rmdir = v9fs_vfs_rmdir,
.mknod = v9fs_vfs_mknod,
.rename = v9fs_vfs_rename,
- .readlink = v9fs_vfs_readlink,
.getattr = v9fs_vfs_getattr,
.setattr = v9fs_vfs_setattr,
};
@@ -1253,7 +1214,7 @@
};
static const struct inode_operations v9fs_symlink_inode_operations = {
- .readlink = v9fs_vfs_readlink,
+ .readlink = generic_readlink,
.follow_link = v9fs_vfs_follow_link,
.put_link = v9fs_vfs_put_link,
.getattr = v9fs_vfs_getattr,
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index fea9e89..b44ce0a 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -269,7 +269,7 @@
int err;
mntget(newmnt);
- err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist);
+ err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags | MNT_SHRINKABLE, mntlist);
switch (err) {
case 0:
path_put(&nd->path);
@@ -371,7 +371,6 @@
if (IS_ERR(mnt))
goto out_err;
- nd->path.mnt->mnt_flags |= MNT_SHRINKABLE;
rc = add_mount_helper(mnt, nd, &cifs_dfs_automount_list);
out:
diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c
index c8afa6b..32a5f46 100644
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -121,8 +121,10 @@
ret = -ENOENT;
path_put(path);
}
- } else
+ } else {
ret = -EPERM;
+ path_put(path);
+ }
}
return ret;
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 429ca0b..7f85450 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -715,31 +715,31 @@
/* Released in ecryptfs_put_link(); only release here on error */
buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
- rc = -ENOMEM;
+ buf = ERR_PTR(-ENOMEM);
goto out;
}
old_fs = get_fs();
set_fs(get_ds());
rc = dentry->d_inode->i_op->readlink(dentry, (char __user *)buf, len);
set_fs(old_fs);
- if (rc < 0)
- goto out_free;
- else
+ if (rc < 0) {
+ kfree(buf);
+ buf = ERR_PTR(rc);
+ } else
buf[rc] = '\0';
- rc = 0;
- nd_set_link(nd, buf);
- goto out;
-out_free:
- kfree(buf);
out:
- return ERR_PTR(rc);
+ nd_set_link(nd, buf);
+ return NULL;
}
static void
ecryptfs_put_link(struct dentry *dentry, struct nameidata *nd, void *ptr)
{
- /* Free the char* */
- kfree(nd_get_link(nd));
+ char *buf = nd_get_link(nd);
+ if (!IS_ERR(buf)) {
+ /* Free the char* */
+ kfree(buf);
+ }
}
/**
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 2cf93ec..97e01dc 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -618,60 +618,90 @@
static struct kmem_cache *fasync_cache __read_mostly;
/*
- * fasync_helper() is used by almost all character device drivers
- * to set up the fasync queue. It returns negative on error, 0 if it did
- * no changes and positive if it added/deleted the entry.
+ * Remove a fasync entry. If successfully removed, return
+ * positive and clear the FASYNC flag. If no entry exists,
+ * do nothing and return 0.
+ *
+ * NOTE! It is very important that the FASYNC flag always
+ * match the state "is the filp on a fasync list".
+ *
+ * We always take the 'filp->f_lock', in since fasync_lock
+ * needs to be irq-safe.
*/
-int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp)
+static int fasync_remove_entry(struct file *filp, struct fasync_struct **fapp)
{
struct fasync_struct *fa, **fp;
- struct fasync_struct *new = NULL;
int result = 0;
- if (on) {
- new = kmem_cache_alloc(fasync_cache, GFP_KERNEL);
- if (!new)
- return -ENOMEM;
- }
-
- /*
- * We need to take f_lock first since it's not an IRQ-safe
- * lock.
- */
spin_lock(&filp->f_lock);
write_lock_irq(&fasync_lock);
for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) {
- if (fa->fa_file == filp) {
- if(on) {
- fa->fa_fd = fd;
- kmem_cache_free(fasync_cache, new);
- } else {
- *fp = fa->fa_next;
- kmem_cache_free(fasync_cache, fa);
- result = 1;
- }
- goto out;
- }
- }
-
- if (on) {
- new->magic = FASYNC_MAGIC;
- new->fa_file = filp;
- new->fa_fd = fd;
- new->fa_next = *fapp;
- *fapp = new;
- result = 1;
- }
-out:
- if (on)
- filp->f_flags |= FASYNC;
- else
+ if (fa->fa_file != filp)
+ continue;
+ *fp = fa->fa_next;
+ kmem_cache_free(fasync_cache, fa);
filp->f_flags &= ~FASYNC;
+ result = 1;
+ break;
+ }
write_unlock_irq(&fasync_lock);
spin_unlock(&filp->f_lock);
return result;
}
+/*
+ * Add a fasync entry. Return negative on error, positive if
+ * added, and zero if did nothing but change an existing one.
+ *
+ * NOTE! It is very important that the FASYNC flag always
+ * match the state "is the filp on a fasync list".
+ */
+static int fasync_add_entry(int fd, struct file *filp, struct fasync_struct **fapp)
+{
+ struct fasync_struct *new, *fa, **fp;
+ int result = 0;
+
+ new = kmem_cache_alloc(fasync_cache, GFP_KERNEL);
+ if (!new)
+ return -ENOMEM;
+
+ spin_lock(&filp->f_lock);
+ write_lock_irq(&fasync_lock);
+ for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) {
+ if (fa->fa_file != filp)
+ continue;
+ fa->fa_fd = fd;
+ kmem_cache_free(fasync_cache, new);
+ goto out;
+ }
+
+ new->magic = FASYNC_MAGIC;
+ new->fa_file = filp;
+ new->fa_fd = fd;
+ new->fa_next = *fapp;
+ *fapp = new;
+ result = 1;
+ filp->f_flags |= FASYNC;
+
+out:
+ write_unlock_irq(&fasync_lock);
+ spin_unlock(&filp->f_lock);
+ return result;
+}
+
+/*
+ * fasync_helper() is used by almost all character device drivers
+ * to set up the fasync queue, and for regular files by the file
+ * lease code. It returns negative on error, 0 if it did no changes
+ * and positive if it added/deleted the entry.
+ */
+int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp)
+{
+ if (!on)
+ return fasync_remove_entry(filp, fapp);
+ return fasync_add_entry(fd, filp, fapp);
+}
+
EXPORT_SYMBOL(fasync_helper);
void __kill_fasync(struct fasync_struct *fa, int sig, int band)
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index a5089a6..7239efc 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -646,22 +646,27 @@
static int hppfs_readlink(struct dentry *dentry, char __user *buffer,
int buflen)
{
- struct dentry *proc_dentry;
-
- proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+ struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
return proc_dentry->d_inode->i_op->readlink(proc_dentry, buffer,
buflen);
}
static void *hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
- struct dentry *proc_dentry;
-
- proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+ struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
return proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd);
}
+static void hppfs_put_link(struct dentry *dentry, struct nameidata *nd,
+ void *cookie)
+{
+ struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+
+ if (proc_dentry->d_inode->i_op->put_link)
+ proc_dentry->d_inode->i_op->put_link(proc_dentry, nd, cookie);
+}
+
static const struct inode_operations hppfs_dir_iops = {
.lookup = hppfs_lookup,
};
@@ -669,6 +674,7 @@
static const struct inode_operations hppfs_link_iops = {
.readlink = hppfs_readlink,
.follow_link = hppfs_follow_link,
+ .put_link = hppfs_put_link,
};
static struct inode *get_inode(struct super_block *sb, struct dentry *dentry)
diff --git a/fs/namei.c b/fs/namei.c
index b55440b..94a5e60 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -561,6 +561,7 @@
dget(dentry);
}
mntget(path->mnt);
+ nd->last_type = LAST_BIND;
cookie = dentry->d_inode->i_op->follow_link(dentry, nd);
error = PTR_ERR(cookie);
if (!IS_ERR(cookie)) {
@@ -1603,11 +1604,12 @@
struct file *filp;
struct nameidata nd;
int error;
- struct path path, save;
+ struct path path;
struct dentry *dir;
int count = 0;
int will_truncate;
int flag = open_to_namei_flags(open_flag);
+ int force_reval = 0;
/*
* O_SYNC is implemented as __O_SYNC|O_DSYNC. As many places only
@@ -1619,7 +1621,7 @@
open_flag |= O_DSYNC;
if (!acc_mode)
- acc_mode = MAY_OPEN | ACC_MODE(flag);
+ acc_mode = MAY_OPEN | ACC_MODE(open_flag);
/* O_TRUNC implies we need access checks for write permissions */
if (flag & O_TRUNC)
@@ -1659,9 +1661,12 @@
/*
* Create - we need to know the parent.
*/
+reval:
error = path_init(dfd, pathname, LOOKUP_PARENT, &nd);
if (error)
return ERR_PTR(error);
+ if (force_reval)
+ nd.flags |= LOOKUP_REVAL;
error = path_walk(pathname, &nd);
if (error) {
if (nd.root.mnt)
@@ -1853,17 +1858,7 @@
error = security_inode_follow_link(path.dentry, &nd);
if (error)
goto exit_dput;
- save = nd.path;
- path_get(&save);
error = __do_follow_link(&path, &nd);
- if (error == -ESTALE) {
- /* nd.path had been dropped */
- nd.path = save;
- path_get(&nd.path);
- nd.flags |= LOOKUP_REVAL;
- error = __do_follow_link(&path, &nd);
- }
- path_put(&save);
path_put(&path);
if (error) {
/* Does someone understand code flow here? Or it is only
@@ -1873,6 +1868,10 @@
release_open_intent(&nd);
if (nd.root.mnt)
path_put(&nd.root);
+ if (error == -ESTALE && !force_reval) {
+ force_reval = 1;
+ goto reval;
+ }
return ERR_PTR(error);
}
nd.flags &= ~LOOKUP_PARENT;
diff --git a/fs/namespace.c b/fs/namespace.c
index 7d70d63..c768f73 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -965,10 +965,12 @@
int may_umount(struct vfsmount *mnt)
{
int ret = 1;
+ down_read(&namespace_sem);
spin_lock(&vfsmount_lock);
if (propagate_mount_busy(mnt, 2))
ret = 0;
spin_unlock(&vfsmount_lock);
+ up_read(&namespace_sem);
return ret;
}
@@ -1352,12 +1354,12 @@
if (err)
goto out_cleanup_ids;
+ spin_lock(&vfsmount_lock);
+
if (IS_MNT_SHARED(dest_mnt)) {
for (p = source_mnt; p; p = next_mnt(p, source_mnt))
set_mnt_shared(p);
}
-
- spin_lock(&vfsmount_lock);
if (parent_path) {
detach_mnt(source_mnt, parent_path);
attach_mnt(source_mnt, path);
@@ -1534,8 +1536,12 @@
err = change_mount_flags(path->mnt, flags);
else
err = do_remount_sb(sb, flags, data, 0);
- if (!err)
+ if (!err) {
+ spin_lock(&vfsmount_lock);
+ mnt_flags |= path->mnt->mnt_flags & MNT_PNODE_MASK;
path->mnt->mnt_flags = mnt_flags;
+ spin_unlock(&vfsmount_lock);
+ }
up_write(&sb->s_umount);
if (!err) {
security_sb_post_remount(path->mnt, flags, data);
@@ -1665,6 +1671,8 @@
{
int err;
+ mnt_flags &= ~(MNT_SHARED | MNT_WRITE_HOLD);
+
down_write(&namespace_sem);
/* Something was mounted here while we slept */
while (d_mountpoint(path->dentry) &&
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index c9ee67b..1afb0a1 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -121,7 +121,7 @@
if (warned)
return 0;
- warned = false;
+ warned = true;
entry = p;
ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 8271cf0..a94e8bd 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -552,7 +552,7 @@
spin_lock(&group->inotify_data.idr_lock);
ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
- group->inotify_data.last_wd,
+ group->inotify_data.last_wd+1,
&tmp_ientry->wd);
spin_unlock(&group->inotify_data.idr_lock);
if (ret) {
@@ -632,7 +632,7 @@
spin_lock_init(&group->inotify_data.idr_lock);
idr_init(&group->inotify_data.idr);
- group->inotify_data.last_wd = 1;
+ group->inotify_data.last_wd = 0;
group->inotify_data.user = user;
group->inotify_data.fa = NULL;
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 18d5cc6..e42bbd8 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1419,7 +1419,6 @@
goto out;
error = PROC_I(inode)->op.proc_get_link(inode, &nd->path);
- nd->last_type = LAST_BIND;
out:
return ERR_PTR(error);
}
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index 2efc571..1739a4a 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -123,30 +123,6 @@
/*****************************************************************************/
/*
- * check that file shrinkage doesn't leave any VMAs dangling in midair
- */
-static int ramfs_nommu_check_mappings(struct inode *inode,
- size_t newsize, size_t size)
-{
- struct vm_area_struct *vma;
- struct prio_tree_iter iter;
-
- /* search for VMAs that fall within the dead zone */
- vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
- newsize >> PAGE_SHIFT,
- (size + PAGE_SIZE - 1) >> PAGE_SHIFT
- ) {
- /* found one - only interested if it's shared out of the page
- * cache */
- if (vma->vm_flags & VM_SHARED)
- return -ETXTBSY; /* not quite true, but near enough */
- }
-
- return 0;
-}
-
-/*****************************************************************************/
-/*
*
*/
static int ramfs_nommu_resize(struct inode *inode, loff_t newsize, loff_t size)
@@ -164,7 +140,7 @@
/* check that a decrease in size doesn't cut off any shared mappings */
if (newsize < size) {
- ret = ramfs_nommu_check_mappings(inode, newsize, size);
+ ret = nommu_shrink_inode_mappings(inode, size, newsize);
if (ret < 0)
return ret;
}
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 09783cc..77414db 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -954,16 +954,14 @@
ASSERT_ALWAYS(!xfs_iflags_test(ip, XFS_IRECLAIM));
/*
- * If we have nothing to flush with this inode then complete the
- * teardown now, otherwise delay the flush operation.
+ * We always use background reclaim here because even if the
+ * inode is clean, it still may be under IO and hence we have
+ * to take the flush lock. The background reclaim path handles
+ * this more efficiently than we can here, so simply let background
+ * reclaim tear down all inodes.
*/
- if (!xfs_inode_clean(ip)) {
- xfs_inode_set_reclaim_tag(ip);
- return;
- }
-
out_reclaim:
- xfs_ireclaim(ip);
+ xfs_inode_set_reclaim_tag(ip);
}
/*
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 6fed97a..1f5e4bb 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -65,7 +65,6 @@
* as the tree is sparse and a gang lookup walks to find
* the number of objects requested.
*/
- read_lock(&pag->pag_ici_lock);
if (tag == XFS_ICI_NO_TAG) {
nr_found = radix_tree_gang_lookup(&pag->pag_ici_root,
(void **)&ip, *first_index, 1);
@@ -74,7 +73,7 @@
(void **)&ip, *first_index, 1, tag);
}
if (!nr_found)
- goto unlock;
+ return NULL;
/*
* Update the index for the next lookup. Catch overflows
@@ -84,13 +83,8 @@
*/
*first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
if (*first_index < XFS_INO_TO_AGINO(mp, ip->i_ino))
- goto unlock;
-
+ return NULL;
return ip;
-
-unlock:
- read_unlock(&pag->pag_ici_lock);
- return NULL;
}
STATIC int
@@ -100,7 +94,8 @@
int (*execute)(struct xfs_inode *ip,
struct xfs_perag *pag, int flags),
int flags,
- int tag)
+ int tag,
+ int exclusive)
{
struct xfs_perag *pag = &mp->m_perag[ag];
uint32_t first_index;
@@ -114,10 +109,20 @@
int error = 0;
xfs_inode_t *ip;
+ if (exclusive)
+ write_lock(&pag->pag_ici_lock);
+ else
+ read_lock(&pag->pag_ici_lock);
ip = xfs_inode_ag_lookup(mp, pag, &first_index, tag);
- if (!ip)
+ if (!ip) {
+ if (exclusive)
+ write_unlock(&pag->pag_ici_lock);
+ else
+ read_unlock(&pag->pag_ici_lock);
break;
+ }
+ /* execute releases pag->pag_ici_lock */
error = execute(ip, pag, flags);
if (error == EAGAIN) {
skipped++;
@@ -125,9 +130,8 @@
}
if (error)
last_error = error;
- /*
- * bail out if the filesystem is corrupted.
- */
+
+ /* bail out if the filesystem is corrupted. */
if (error == EFSCORRUPTED)
break;
@@ -148,7 +152,8 @@
int (*execute)(struct xfs_inode *ip,
struct xfs_perag *pag, int flags),
int flags,
- int tag)
+ int tag,
+ int exclusive)
{
int error = 0;
int last_error = 0;
@@ -157,7 +162,8 @@
for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
if (!mp->m_perag[ag].pag_ici_init)
continue;
- error = xfs_inode_ag_walk(mp, ag, execute, flags, tag);
+ error = xfs_inode_ag_walk(mp, ag, execute, flags, tag,
+ exclusive);
if (error) {
last_error = error;
if (error == EFSCORRUPTED)
@@ -174,30 +180,31 @@
struct xfs_perag *pag)
{
struct inode *inode = VFS_I(ip);
+ int error = EFSCORRUPTED;
/* nothing to sync during shutdown */
- if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
- read_unlock(&pag->pag_ici_lock);
- return EFSCORRUPTED;
- }
+ if (XFS_FORCED_SHUTDOWN(ip->i_mount))
+ goto out_unlock;
- /*
- * If we can't get a reference on the inode, it must be in reclaim.
- * Leave it for the reclaim code to flush. Also avoid inodes that
- * haven't been fully initialised.
- */
- if (!igrab(inode)) {
- read_unlock(&pag->pag_ici_lock);
- return ENOENT;
- }
- read_unlock(&pag->pag_ici_lock);
+ /* avoid new or reclaimable inodes. Leave for reclaim code to flush */
+ error = ENOENT;
+ if (xfs_iflags_test(ip, XFS_INEW | XFS_IRECLAIMABLE | XFS_IRECLAIM))
+ goto out_unlock;
- if (is_bad_inode(inode) || xfs_iflags_test(ip, XFS_INEW)) {
+ /* If we can't grab the inode, it must on it's way to reclaim. */
+ if (!igrab(inode))
+ goto out_unlock;
+
+ if (is_bad_inode(inode)) {
IRELE(ip);
- return ENOENT;
+ goto out_unlock;
}
- return 0;
+ /* inode is valid */
+ error = 0;
+out_unlock:
+ read_unlock(&pag->pag_ici_lock);
+ return error;
}
STATIC int
@@ -282,7 +289,7 @@
ASSERT((flags & ~(SYNC_TRYLOCK|SYNC_WAIT)) == 0);
error = xfs_inode_ag_iterator(mp, xfs_sync_inode_data, flags,
- XFS_ICI_NO_TAG);
+ XFS_ICI_NO_TAG, 0);
if (error)
return XFS_ERROR(error);
@@ -304,7 +311,7 @@
ASSERT((flags & ~SYNC_WAIT) == 0);
return xfs_inode_ag_iterator(mp, xfs_sync_inode_attr, flags,
- XFS_ICI_NO_TAG);
+ XFS_ICI_NO_TAG, 0);
}
STATIC int
@@ -664,60 +671,6 @@
kthread_stop(mp->m_sync_task);
}
-STATIC int
-xfs_reclaim_inode(
- xfs_inode_t *ip,
- int sync_mode)
-{
- xfs_perag_t *pag = xfs_get_perag(ip->i_mount, ip->i_ino);
-
- /* The hash lock here protects a thread in xfs_iget_core from
- * racing with us on linking the inode back with a vnode.
- * Once we have the XFS_IRECLAIM flag set it will not touch
- * us.
- */
- write_lock(&pag->pag_ici_lock);
- spin_lock(&ip->i_flags_lock);
- if (__xfs_iflags_test(ip, XFS_IRECLAIM) ||
- !__xfs_iflags_test(ip, XFS_IRECLAIMABLE)) {
- spin_unlock(&ip->i_flags_lock);
- write_unlock(&pag->pag_ici_lock);
- return -EAGAIN;
- }
- __xfs_iflags_set(ip, XFS_IRECLAIM);
- spin_unlock(&ip->i_flags_lock);
- write_unlock(&pag->pag_ici_lock);
- xfs_put_perag(ip->i_mount, pag);
-
- /*
- * If the inode is still dirty, then flush it out. If the inode
- * is not in the AIL, then it will be OK to flush it delwri as
- * long as xfs_iflush() does not keep any references to the inode.
- * We leave that decision up to xfs_iflush() since it has the
- * knowledge of whether it's OK to simply do a delwri flush of
- * the inode or whether we need to wait until the inode is
- * pulled from the AIL.
- * We get the flush lock regardless, though, just to make sure
- * we don't free it while it is being flushed.
- */
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_iflock(ip);
-
- /*
- * In the case of a forced shutdown we rely on xfs_iflush() to
- * wait for the inode to be unpinned before returning an error.
- */
- if (!is_bad_inode(VFS_I(ip)) && xfs_iflush(ip, sync_mode) == 0) {
- /* synchronize with xfs_iflush_done */
- xfs_iflock(ip);
- xfs_ifunlock(ip);
- }
-
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_ireclaim(ip);
- return 0;
-}
-
void
__xfs_inode_set_reclaim_tag(
struct xfs_perag *pag,
@@ -760,19 +713,55 @@
}
STATIC int
-xfs_reclaim_inode_now(
+xfs_reclaim_inode(
struct xfs_inode *ip,
struct xfs_perag *pag,
- int flags)
+ int sync_mode)
{
- /* ignore if already under reclaim */
- if (xfs_iflags_test(ip, XFS_IRECLAIM)) {
- read_unlock(&pag->pag_ici_lock);
+ /*
+ * The radix tree lock here protects a thread in xfs_iget from racing
+ * with us starting reclaim on the inode. Once we have the
+ * XFS_IRECLAIM flag set it will not touch us.
+ */
+ spin_lock(&ip->i_flags_lock);
+ ASSERT_ALWAYS(__xfs_iflags_test(ip, XFS_IRECLAIMABLE));
+ if (__xfs_iflags_test(ip, XFS_IRECLAIM)) {
+ /* ignore as it is already under reclaim */
+ spin_unlock(&ip->i_flags_lock);
+ write_unlock(&pag->pag_ici_lock);
return 0;
}
- read_unlock(&pag->pag_ici_lock);
+ __xfs_iflags_set(ip, XFS_IRECLAIM);
+ spin_unlock(&ip->i_flags_lock);
+ write_unlock(&pag->pag_ici_lock);
- return xfs_reclaim_inode(ip, flags);
+ /*
+ * If the inode is still dirty, then flush it out. If the inode
+ * is not in the AIL, then it will be OK to flush it delwri as
+ * long as xfs_iflush() does not keep any references to the inode.
+ * We leave that decision up to xfs_iflush() since it has the
+ * knowledge of whether it's OK to simply do a delwri flush of
+ * the inode or whether we need to wait until the inode is
+ * pulled from the AIL.
+ * We get the flush lock regardless, though, just to make sure
+ * we don't free it while it is being flushed.
+ */
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+ xfs_iflock(ip);
+
+ /*
+ * In the case of a forced shutdown we rely on xfs_iflush() to
+ * wait for the inode to be unpinned before returning an error.
+ */
+ if (!is_bad_inode(VFS_I(ip)) && xfs_iflush(ip, sync_mode) == 0) {
+ /* synchronize with xfs_iflush_done */
+ xfs_iflock(ip);
+ xfs_ifunlock(ip);
+ }
+
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ xfs_ireclaim(ip);
+ return 0;
}
int
@@ -780,6 +769,6 @@
xfs_mount_t *mp,
int mode)
{
- return xfs_inode_ag_iterator(mp, xfs_reclaim_inode_now, mode,
- XFS_ICI_RECLAIM_TAG);
+ return xfs_inode_ag_iterator(mp, xfs_reclaim_inode, mode,
+ XFS_ICI_RECLAIM_TAG, 1);
}
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index a500b4d..ea932b4 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -54,6 +54,6 @@
int xfs_sync_inode_valid(struct xfs_inode *ip, struct xfs_perag *pag);
int xfs_inode_ag_iterator(struct xfs_mount *mp,
int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
- int flags, int tag);
+ int flags, int tag, int write_lock);
#endif
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 71af76f..873e07e 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -891,7 +891,7 @@
uint flags)
{
ASSERT(mp->m_quotainfo);
- xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG);
+ xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG, 0);
}
/*------------------------------------------------------------------------*/
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index d1483a4..84ca1cf 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -114,10 +114,82 @@
return error;
}
+/*
+ * We need to check that the format of the data fork in the temporary inode is
+ * valid for the target inode before doing the swap. This is not a problem with
+ * attr1 because of the fixed fork offset, but attr2 has a dynamically sized
+ * data fork depending on the space the attribute fork is taking so we can get
+ * invalid formats on the target inode.
+ *
+ * E.g. target has space for 7 extents in extent format, temp inode only has
+ * space for 6. If we defragment down to 7 extents, then the tmp format is a
+ * btree, but when swapped it needs to be in extent format. Hence we can't just
+ * blindly swap data forks on attr2 filesystems.
+ *
+ * Note that we check the swap in both directions so that we don't end up with
+ * a corrupt temporary inode, either.
+ *
+ * Note that fixing the way xfs_fsr sets up the attribute fork in the source
+ * inode will prevent this situation from occurring, so all we do here is
+ * reject and log the attempt. basically we are putting the responsibility on
+ * userspace to get this right.
+ */
+static int
+xfs_swap_extents_check_format(
+ xfs_inode_t *ip, /* target inode */
+ xfs_inode_t *tip) /* tmp inode */
+{
+
+ /* Should never get a local format */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL ||
+ tip->i_d.di_format == XFS_DINODE_FMT_LOCAL)
+ return EINVAL;
+
+ /*
+ * if the target inode has less extents that then temporary inode then
+ * why did userspace call us?
+ */
+ if (ip->i_d.di_nextents < tip->i_d.di_nextents)
+ return EINVAL;
+
+ /*
+ * if the target inode is in extent form and the temp inode is in btree
+ * form then we will end up with the target inode in the wrong format
+ * as we already know there are less extents in the temp inode.
+ */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ tip->i_d.di_format == XFS_DINODE_FMT_BTREE)
+ return EINVAL;
+
+ /* Check temp in extent form to max in target */
+ if (tip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) > ip->i_df.if_ext_max)
+ return EINVAL;
+
+ /* Check target in extent form to max in temp */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+ XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) > tip->i_df.if_ext_max)
+ return EINVAL;
+
+ /* Check root block of temp in btree form to max in target */
+ if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
+ XFS_IFORK_BOFF(ip) &&
+ tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip))
+ return EINVAL;
+
+ /* Check root block of target in btree form to max in temp */
+ if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
+ XFS_IFORK_BOFF(tip) &&
+ ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip))
+ return EINVAL;
+
+ return 0;
+}
+
int
xfs_swap_extents(
- xfs_inode_t *ip,
- xfs_inode_t *tip,
+ xfs_inode_t *ip, /* target inode */
+ xfs_inode_t *tip, /* tmp inode */
xfs_swapext_t *sxp)
{
xfs_mount_t *mp;
@@ -161,13 +233,6 @@
goto out_unlock;
}
- /* Should never get a local format */
- if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL ||
- tip->i_d.di_format == XFS_DINODE_FMT_LOCAL) {
- error = XFS_ERROR(EINVAL);
- goto out_unlock;
- }
-
if (VN_CACHED(VFS_I(tip)) != 0) {
error = xfs_flushinval_pages(tip, 0, -1,
FI_REMAPF_LOCKED);
@@ -189,13 +254,12 @@
goto out_unlock;
}
- /*
- * If the target has extended attributes, the tmp file
- * must also in order to ensure the correct data fork
- * format.
- */
- if ( XFS_IFORK_Q(ip) != XFS_IFORK_Q(tip) ) {
- error = XFS_ERROR(EINVAL);
+ /* check inode formats now that data is flushed */
+ error = xfs_swap_extents_check_format(ip, tip);
+ if (error) {
+ xfs_fs_cmn_err(CE_NOTE, mp,
+ "%s: inode 0x%llx format is incompatible for exchanging.",
+ __FILE__, ip->i_ino);
goto out_unlock;
}
@@ -276,6 +340,16 @@
*tifp = *tempifp; /* struct copy */
/*
+ * Fix the in-memory data fork values that are dependent on the fork
+ * offset in the inode. We can't assume they remain the same as attr2
+ * has dynamic fork offsets.
+ */
+ ifp->if_ext_max = XFS_IFORK_SIZE(ip, XFS_DATA_FORK) /
+ (uint)sizeof(xfs_bmbt_rec_t);
+ tifp->if_ext_max = XFS_IFORK_SIZE(tip, XFS_DATA_FORK) /
+ (uint)sizeof(xfs_bmbt_rec_t);
+
+ /*
* Fix the on-disk inode values
*/
tmp = (__uint64_t)ip->i_d.di_nblocks;
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index fa402a6..155e798 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -73,7 +73,6 @@
ASSERT(atomic_read(&ip->i_pincount) == 0);
ASSERT(!spin_is_locked(&ip->i_flags_lock));
ASSERT(completion_done(&ip->i_flush));
- ASSERT(!rwsem_is_locked(&ip->i_iolock.mr_lock));
mrlock_init(&ip->i_iolock, MRLOCK_BARRIER, "xfsio", ip->i_ino);
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 391d36b..ef77fd8 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2842,13 +2842,9 @@
/*
* If the inode isn't dirty, then just release the inode flush lock and
- * do nothing. Treat stale inodes the same; we cannot rely on the
- * backing buffer remaining stale in cache for the remaining life of
- * the stale inode and so xfs_itobp() below may give us a buffer that
- * no longer contains inodes below. Doing this stale check here also
- * avoids forcing the log on pinned, stale inodes.
+ * do nothing.
*/
- if (xfs_inode_clean(ip) || xfs_iflags_test(ip, XFS_ISTALE)) {
+ if (xfs_inode_clean(ip)) {
xfs_ifunlock(ip);
return 0;
}
@@ -2872,6 +2868,19 @@
xfs_iunpin_wait(ip);
/*
+ * For stale inodes we cannot rely on the backing buffer remaining
+ * stale in cache for the remaining life of the stale inode and so
+ * xfs_itobp() below may give us a buffer that no longer contains
+ * inodes below. We have to check this after ensuring the inode is
+ * unpinned so that it is safe to reclaim the stale inode after the
+ * flush call.
+ */
+ if (xfs_iflags_test(ip, XFS_ISTALE)) {
+ xfs_ifunlock(ip);
+ return 0;
+ }
+
+ /*
* This may have been unpinned because the filesystem is shutting
* down forcibly. If that's the case we must not write this inode
* to disk, because the log record didn't make it to disk!
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 9e15a11..6be05f7 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -1517,6 +1517,8 @@
*/
error = xfs_rtfind_forw(mp, tp, end, mp->m_sb.sb_rextents - 1,
&postblock);
+ if (error)
+ return error;
/*
* If there are blocks not being freed at the front of the
* old extent, add summary data for them to be allocated.
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 9147ca8..b1bcb27 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2463,7 +2463,7 @@
int __init get_filesystem_list(char *buf);
-#define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE])
+#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE])
#define OPEN_FMODE(flag) ((__force fmode_t)((flag + 1) & O_ACCMODE))
#endif /* __KERNEL__ */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 3fc9f5a..328bca6 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -734,6 +734,10 @@
/* Force a compilation error if condition is constant and true */
#define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)]))
+/* Force a compilation error if a constant expression is not a power of 2 */
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \
+ BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
+
/* Force a compilation error if condition is true, but also produce a
result (of value 0 and type size_t), so the expression can be used
e.g. in a structure initializer (or where-ever else comma expressions
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 7c6b32a1..6f6c5f3 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -67,7 +67,7 @@
/**
* DECLARE_KFIFO - macro to declare a kfifo and the associated buffer
* @name: name of the declared kfifo datatype
- * @size: size of the fifo buffer
+ * @size: size of the fifo buffer. Must be a power of two.
*
* Note1: the macro can be used inside struct or union declaration
* Note2: the macro creates two objects:
@@ -91,7 +91,7 @@
/**
* DEFINE_KFIFO - macro to define and initialize a kfifo
* @name: name of the declared kfifo datatype
- * @size: size of the fifo buffer
+ * @size: size of the fifo buffer. Must be a power of two.
*
* Note1: the macro can be used for global and local kfifo data type variables
* Note2: the macro creates two objects:
@@ -104,15 +104,28 @@
#undef __kfifo_initializer
-extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer,
+extern void kfifo_init(struct kfifo *fifo, void *buffer,
unsigned int size);
extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size,
gfp_t gfp_mask);
extern void kfifo_free(struct kfifo *fifo);
extern unsigned int kfifo_in(struct kfifo *fifo,
- const unsigned char *from, unsigned int len);
+ const void *from, unsigned int len);
extern __must_check unsigned int kfifo_out(struct kfifo *fifo,
- unsigned char *to, unsigned int len);
+ void *to, unsigned int len);
+extern __must_check unsigned int kfifo_out_peek(struct kfifo *fifo,
+ void *to, unsigned int len, unsigned offset);
+
+/**
+ * kfifo_initialized - Check if kfifo is initialized.
+ * @fifo: fifo to check
+ * Return %true if FIFO is initialized, otherwise %false.
+ * Assumes the fifo was 0 before.
+ */
+static inline bool kfifo_initialized(struct kfifo *fifo)
+{
+ return fifo->buffer != 0;
+}
/**
* kfifo_reset - removes the entire FIFO contents
@@ -194,7 +207,7 @@
* bytes copied.
*/
static inline unsigned int kfifo_in_locked(struct kfifo *fifo,
- const unsigned char *from, unsigned int n, spinlock_t *lock)
+ const void *from, unsigned int n, spinlock_t *lock)
{
unsigned long flags;
unsigned int ret;
@@ -219,7 +232,7 @@
* @to buffer and returns the number of copied bytes.
*/
static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo,
- unsigned char *to, unsigned int n, spinlock_t *lock)
+ void *to, unsigned int n, spinlock_t *lock)
{
unsigned long flags;
unsigned int ret;
@@ -228,13 +241,6 @@
ret = kfifo_out(fifo, to, n);
- /*
- * optimization: if the FIFO is empty, set the indices to 0
- * so we don't wrap the next time
- */
- if (kfifo_is_empty(fifo))
- kfifo_reset(fifo);
-
spin_unlock_irqrestore(lock, flags);
return ret;
@@ -242,11 +248,11 @@
extern void kfifo_skip(struct kfifo *fifo, unsigned int len);
-extern __must_check unsigned int kfifo_from_user(struct kfifo *fifo,
- const void __user *from, unsigned int n);
+extern __must_check int kfifo_from_user(struct kfifo *fifo,
+ const void __user *from, unsigned int n, unsigned *lenout);
-extern __must_check unsigned int kfifo_to_user(struct kfifo *fifo,
- void __user *to, unsigned int n);
+extern __must_check int kfifo_to_user(struct kfifo *fifo,
+ void __user *to, unsigned int n, unsigned *lenout);
/*
* __kfifo_add_out internal helper function for updating the out offset
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 6b9c5d0..9cb1834 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -2,6 +2,8 @@
#define MFD_TMIO_H
#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
#define tmio_ioread8(addr) readb(addr)
#define tmio_ioread16(addr) readw(addr)
@@ -18,11 +20,48 @@
writew((val) >> 16, (addr) + 2); \
} while (0)
+#define CNF_CMD 0x04
+#define CNF_CTL_BASE 0x10
+#define CNF_INT_PIN 0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
+#define sd_config_write8(base, shift, reg, val) \
+ tmio_iowrite8((val), (base) + ((reg) << (shift)))
+#define sd_config_write16(base, shift, reg, val) \
+ tmio_iowrite16((val), (base) + ((reg) << (shift)))
+#define sd_config_write32(base, shift, reg, val) \
+ do { \
+ tmio_iowrite16((val), (base) + ((reg) << (shift))); \
+ tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
+ } while (0)
+
+int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
+int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
+void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
+void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
+
/*
* data for the MMC controller
*/
struct tmio_mmc_data {
const unsigned int hclk;
+ void (*set_pwr)(struct platform_device *host, int state);
+ void (*set_clk_div)(struct platform_device *host, int state);
};
/*
diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h
index be3264e..e786fe9 100644
--- a/include/linux/mfd/wm8350/pmic.h
+++ b/include/linux/mfd/wm8350/pmic.h
@@ -666,20 +666,20 @@
#define WM8350_ISINK_FLASH_DUR_64MS (1 << 8)
#define WM8350_ISINK_FLASH_DUR_96MS (2 << 8)
#define WM8350_ISINK_FLASH_DUR_1024MS (3 << 8)
-#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 4)
-#define WM8350_ISINK_FLASH_ON_0_25S (1 << 4)
-#define WM8350_ISINK_FLASH_ON_0_50S (2 << 4)
-#define WM8350_ISINK_FLASH_ON_1_00S (3 << 4)
-#define WM8350_ISINK_FLASH_ON_1_95S (1 << 4)
-#define WM8350_ISINK_FLASH_ON_3_91S (2 << 4)
-#define WM8350_ISINK_FLASH_ON_7_80S (3 << 4)
-#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 0)
-#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 0)
-#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 0)
-#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 0)
-#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 0)
-#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 0)
-#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 0)
+#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 0)
+#define WM8350_ISINK_FLASH_ON_0_25S (1 << 0)
+#define WM8350_ISINK_FLASH_ON_0_50S (2 << 0)
+#define WM8350_ISINK_FLASH_ON_1_00S (3 << 0)
+#define WM8350_ISINK_FLASH_ON_1_95S (1 << 0)
+#define WM8350_ISINK_FLASH_ON_3_91S (2 << 0)
+#define WM8350_ISINK_FLASH_ON_7_80S (3 << 0)
+#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 4)
+#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 4)
+#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 4)
+#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 4)
+#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 4)
+#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 4)
+#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 4)
/*
* Regulator Interrupts.
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 2265f28..60c467b 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1089,6 +1089,7 @@
/* nommu.c */
extern atomic_long_t mmap_pages_allocated;
+extern int nommu_shrink_inode_mappings(struct inode *, size_t, size_t);
/* prio_tree.c */
void vma_prio_tree_add(struct vm_area_struct *, struct vm_area_struct *old);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 84d020b..36f9627 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -122,7 +122,7 @@
unsigned long vm_pgoff; /* the offset in vm_file corresponding to vm_start */
struct file *vm_file; /* the backing file or NULL */
- atomic_t vm_usage; /* region usage count */
+ int vm_usage; /* region usage count (access under nommu_region_sem) */
bool vm_icache_flushed : 1; /* true if the icache has been flushed for
* this region */
};
@@ -205,10 +205,12 @@
struct vm_area_struct * mmap; /* list of VMAs */
struct rb_root mm_rb;
struct vm_area_struct * mmap_cache; /* last find_vma result */
+#ifdef CONFIG_MMU
unsigned long (*get_unmapped_area) (struct file *filp,
unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags);
void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
+#endif
unsigned long mmap_base; /* base of mmap area */
unsigned long task_size; /* size of task vm space */
unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8d4991b..6f7bba9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -377,6 +377,8 @@
#include <linux/aio.h>
+#ifdef CONFIG_MMU
+extern void arch_pick_mmap_layout(struct mm_struct *mm);
extern unsigned long
arch_get_unmapped_area(struct file *, unsigned long, unsigned long,
unsigned long, unsigned long);
@@ -386,6 +388,9 @@
unsigned long flags);
extern void arch_unmap_area(struct mm_struct *, unsigned long);
extern void arch_unmap_area_topdown(struct mm_struct *, unsigned long);
+#else
+static inline void arch_pick_mmap_layout(struct mm_struct *mm) {}
+#endif
#if USE_SPLIT_PTLOCKS
/*
@@ -2491,8 +2496,6 @@
#endif /* CONFIG_SMP */
-extern void arch_pick_mmap_layout(struct mm_struct *mm);
-
#ifdef CONFIG_TRACING
extern void
__trace_special(void *__tr, void *__data,
diff --git a/include/linux/serio.h b/include/linux/serio.h
index e2f3044..813d26c 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -136,25 +136,6 @@
spin_unlock_irq(&serio->lock);
}
-/*
- * Use the following functions to pin serio's driver in process context
- */
-static inline int serio_pin_driver(struct serio *serio)
-{
- return mutex_lock_interruptible(&serio->drv_mutex);
-}
-
-static inline void serio_pin_driver_uninterruptible(struct serio *serio)
-{
- mutex_lock(&serio->drv_mutex);
-}
-
-static inline void serio_unpin_driver(struct serio *serio)
-{
- mutex_unlock(&serio->drv_mutex);
-}
-
-
#endif
/*
diff --git a/include/linux/string.h b/include/linux/string.h
index 651839a..a716ee2 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -72,7 +72,10 @@
}
#ifndef __HAVE_ARCH_STRSTR
-extern char * strstr(const char *,const char *);
+extern char * strstr(const char *, const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNSTR
+extern char * strnstr(const char *, const char *, size_t);
#endif
#ifndef __HAVE_ARCH_STRLEN
extern __kernel_size_t strlen(const char *);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index ef3a294..6abfcf5 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -464,7 +464,7 @@
extern void tty_port_free_xmit_buf(struct tty_port *port);
extern void tty_port_put(struct tty_port *port);
-extern inline struct tty_port *tty_port_get(struct tty_port *port)
+static inline struct tty_port *tty_port_get(struct tty_port *port)
{
if (port)
kref_get(&port->kref);
@@ -486,7 +486,7 @@
struct tty_struct *tty, struct file *filp);
extern int tty_port_open(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
-extern inline int tty_port_users(struct tty_port *port)
+static inline int tty_port_users(struct tty_port *port)
{
return port->count + port->blocked_open;
}
diff --git a/include/net/ip.h b/include/net/ip.h
index d9a0e74..fb63371 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -338,7 +338,7 @@
return inet6_sk(sk)->mc_loop;
#endif
}
- __WARN();
+ WARN_ON(1);
return 1;
}
diff --git a/ipc/shm.c b/ipc/shm.c
index 92fe923..23256b8 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -298,6 +298,9 @@
.mmap = shm_mmap,
.fsync = shm_fsync,
.release = shm_release,
+#ifndef CONFIG_MMU
+ .get_unmapped_area = shm_get_unmapped_area,
+#endif
};
static const struct file_operations shm_file_operations_huge = {
diff --git a/kernel/futex.c b/kernel/futex.c
index 8e3c3ff..d9b3a22 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -203,8 +203,6 @@
* @uaddr: virtual address of the futex
* @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
* @key: address where result is stored.
- * @rw: mapping needs to be read/write (values: VERIFY_READ,
- * VERIFY_WRITE)
*
* Returns a negative error code or 0
* The key words are stored in *key on success.
@@ -216,7 +214,7 @@
* lock_page() might sleep, the caller should not hold a spinlock.
*/
static int
-get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw)
+get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
{
unsigned long address = (unsigned long)uaddr;
struct mm_struct *mm = current->mm;
@@ -239,7 +237,7 @@
* but access_ok() should be faster than find_vma()
*/
if (!fshared) {
- if (unlikely(!access_ok(rw, uaddr, sizeof(u32))))
+ if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))))
return -EFAULT;
key->private.mm = mm;
key->private.address = address;
@@ -248,7 +246,7 @@
}
again:
- err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page);
+ err = get_user_pages_fast(address, 1, 1, &page);
if (err < 0)
return err;
@@ -867,7 +865,7 @@
if (!bitset)
return -EINVAL;
- ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ);
+ ret = get_futex_key(uaddr, fshared, &key);
if (unlikely(ret != 0))
goto out;
@@ -913,10 +911,10 @@
int ret, op_ret;
retry:
- ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
+ ret = get_futex_key(uaddr1, fshared, &key1);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
+ ret = get_futex_key(uaddr2, fshared, &key2);
if (unlikely(ret != 0))
goto out_put_key1;
@@ -1175,11 +1173,10 @@
pi_state = NULL;
}
- ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
+ ret = get_futex_key(uaddr1, fshared, &key1);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2,
- requeue_pi ? VERIFY_WRITE : VERIFY_READ);
+ ret = get_futex_key(uaddr2, fshared, &key2);
if (unlikely(ret != 0))
goto out_put_key1;
@@ -1738,7 +1735,7 @@
*/
retry:
q->key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q->key, VERIFY_READ);
+ ret = get_futex_key(uaddr, fshared, &q->key);
if (unlikely(ret != 0))
return ret;
@@ -1904,7 +1901,7 @@
q.requeue_pi_key = NULL;
retry:
q.key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
+ ret = get_futex_key(uaddr, fshared, &q.key);
if (unlikely(ret != 0))
goto out;
@@ -2023,7 +2020,7 @@
if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current))
return -EPERM;
- ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE);
+ ret = get_futex_key(uaddr, fshared, &key);
if (unlikely(ret != 0))
goto out;
@@ -2215,7 +2212,7 @@
rt_waiter.task = NULL;
key2 = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
+ ret = get_futex_key(uaddr2, fshared, &key2);
if (unlikely(ret != 0))
goto out;
diff --git a/kernel/kfifo.c b/kernel/kfifo.c
index e92d519..32c5c15 100644
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -28,7 +28,7 @@
#include <linux/log2.h>
#include <linux/uaccess.h>
-static void _kfifo_init(struct kfifo *fifo, unsigned char *buffer,
+static void _kfifo_init(struct kfifo *fifo, void *buffer,
unsigned int size)
{
fifo->buffer = buffer;
@@ -41,10 +41,10 @@
* kfifo_init - initialize a FIFO using a preallocated buffer
* @fifo: the fifo to assign the buffer
* @buffer: the preallocated buffer to be used.
- * @size: the size of the internal buffer, this have to be a power of 2.
+ * @size: the size of the internal buffer, this has to be a power of 2.
*
*/
-void kfifo_init(struct kfifo *fifo, unsigned char *buffer, unsigned int size)
+void kfifo_init(struct kfifo *fifo, void *buffer, unsigned int size)
{
/* size must be a power of 2 */
BUG_ON(!is_power_of_2(size));
@@ -159,8 +159,9 @@
memcpy(to + l, fifo->buffer, len - l);
}
-static inline unsigned int __kfifo_from_user_data(struct kfifo *fifo,
- const void __user *from, unsigned int len, unsigned int off)
+static inline int __kfifo_from_user_data(struct kfifo *fifo,
+ const void __user *from, unsigned int len, unsigned int off,
+ unsigned *lenout)
{
unsigned int l;
int ret;
@@ -177,16 +178,20 @@
/* first put the data starting from fifo->in to buffer end */
l = min(len, fifo->size - off);
ret = copy_from_user(fifo->buffer + off, from, l);
-
- if (unlikely(ret))
- return ret + len - l;
+ if (unlikely(ret)) {
+ *lenout = ret;
+ return -EFAULT;
+ }
+ *lenout = l;
/* then put the rest (if any) at the beginning of the buffer */
- return copy_from_user(fifo->buffer, from + l, len - l);
+ ret = copy_from_user(fifo->buffer, from + l, len - l);
+ *lenout += ret ? ret : len - l;
+ return ret ? -EFAULT : 0;
}
-static inline unsigned int __kfifo_to_user_data(struct kfifo *fifo,
- void __user *to, unsigned int len, unsigned int off)
+static inline int __kfifo_to_user_data(struct kfifo *fifo,
+ void __user *to, unsigned int len, unsigned int off, unsigned *lenout)
{
unsigned int l;
int ret;
@@ -203,12 +208,21 @@
/* first get the data from fifo->out until the end of the buffer */
l = min(len, fifo->size - off);
ret = copy_to_user(to, fifo->buffer + off, l);
-
- if (unlikely(ret))
- return ret + len - l;
+ *lenout = l;
+ if (unlikely(ret)) {
+ *lenout -= ret;
+ return -EFAULT;
+ }
/* then get the rest (if any) from the beginning of the buffer */
- return copy_to_user(to + l, fifo->buffer, len - l);
+ len -= l;
+ ret = copy_to_user(to + l, fifo->buffer, len);
+ if (unlikely(ret)) {
+ *lenout += len - ret;
+ return -EFAULT;
+ }
+ *lenout += len;
+ return 0;
}
unsigned int __kfifo_in_n(struct kfifo *fifo,
@@ -235,7 +249,7 @@
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_in(struct kfifo *fifo, const unsigned char *from,
+unsigned int kfifo_in(struct kfifo *fifo, const void *from,
unsigned int len)
{
len = min(kfifo_avail(fifo), len);
@@ -277,7 +291,7 @@
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_out(struct kfifo *fifo, unsigned char *to, unsigned int len)
+unsigned int kfifo_out(struct kfifo *fifo, void *to, unsigned int len)
{
len = min(kfifo_len(fifo), len);
@@ -288,6 +302,27 @@
}
EXPORT_SYMBOL(kfifo_out);
+/**
+ * kfifo_out_peek - copy some data from the FIFO, but do not remove it
+ * @fifo: the fifo to be used.
+ * @to: where the data must be copied.
+ * @len: the size of the destination buffer.
+ * @offset: offset into the fifo
+ *
+ * This function copies at most @len bytes at @offset from the FIFO
+ * into the @to buffer and returns the number of copied bytes.
+ * The data is not removed from the FIFO.
+ */
+unsigned int kfifo_out_peek(struct kfifo *fifo, void *to, unsigned int len,
+ unsigned offset)
+{
+ len = min(kfifo_len(fifo), len + offset);
+
+ __kfifo_out_data(fifo, to, len, offset);
+ return len;
+}
+EXPORT_SYMBOL(kfifo_out_peek);
+
unsigned int __kfifo_out_generic(struct kfifo *fifo,
void *to, unsigned int len, unsigned int recsize,
unsigned int *total)
@@ -299,10 +334,13 @@
unsigned int __kfifo_from_user_n(struct kfifo *fifo,
const void __user *from, unsigned int len, unsigned int recsize)
{
+ unsigned total;
+
if (kfifo_avail(fifo) < len + recsize)
return len + 1;
- return __kfifo_from_user_data(fifo, from, len, recsize);
+ __kfifo_from_user_data(fifo, from, len, recsize, &total);
+ return total;
}
EXPORT_SYMBOL(__kfifo_from_user_n);
@@ -313,18 +351,21 @@
* @len: the length of the data to be added.
*
* This function copies at most @len bytes from the @from into the
- * FIFO depending and returns the number of copied bytes.
+ * FIFO depending and returns -EFAULT/0.
*
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_from_user(struct kfifo *fifo,
- const void __user *from, unsigned int len)
+int kfifo_from_user(struct kfifo *fifo,
+ const void __user *from, unsigned int len, unsigned *total)
{
+ int ret;
len = min(kfifo_avail(fifo), len);
- len -= __kfifo_from_user_data(fifo, from, len, 0);
+ ret = __kfifo_from_user_data(fifo, from, len, 0, total);
+ if (ret)
+ return ret;
__kfifo_add_in(fifo, len);
- return len;
+ return 0;
}
EXPORT_SYMBOL(kfifo_from_user);
@@ -339,17 +380,17 @@
void __user *to, unsigned int len, unsigned int reclen,
unsigned int recsize)
{
- unsigned int ret;
+ unsigned int ret, total;
if (kfifo_len(fifo) < reclen + recsize)
return len;
- ret = __kfifo_to_user_data(fifo, to, reclen, recsize);
+ ret = __kfifo_to_user_data(fifo, to, reclen, recsize, &total);
if (likely(ret == 0))
__kfifo_add_out(fifo, reclen + recsize);
- return ret;
+ return total;
}
EXPORT_SYMBOL(__kfifo_to_user_n);
@@ -358,20 +399,22 @@
* @fifo: the fifo to be used.
* @to: where the data must be copied.
* @len: the size of the destination buffer.
+ @ @lenout: pointer to output variable with copied data
*
* This function copies at most @len bytes from the FIFO into the
- * @to buffer and returns the number of copied bytes.
+ * @to buffer and 0 or -EFAULT.
*
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
-unsigned int kfifo_to_user(struct kfifo *fifo,
- void __user *to, unsigned int len)
+int kfifo_to_user(struct kfifo *fifo,
+ void __user *to, unsigned int len, unsigned *lenout)
{
+ int ret;
len = min(kfifo_len(fifo), len);
- len -= __kfifo_to_user_data(fifo, to, len, 0);
- __kfifo_add_out(fifo, len);
- return len;
+ ret = __kfifo_to_user_data(fifo, to, len, 0, lenout);
+ __kfifo_add_out(fifo, *lenout);
+ return ret;
}
EXPORT_SYMBOL(kfifo_to_user);
diff --git a/kernel/smp.c b/kernel/smp.c
index de735a6..f104084 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -347,7 +347,7 @@
goto call;
/* Try for same node. */
- nodemask = cpumask_of_node(cpu);
+ nodemask = cpumask_of_node(cpu_to_node(cpu));
for (cpu = cpumask_first_and(nodemask, mask); cpu < nr_cpu_ids;
cpu = cpumask_next_and(cpu, nodemask, mask)) {
if (cpu_online(cpu))
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 7968762..1e6640f 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1690,7 +1690,7 @@
static int ftrace_match(char *str, char *regex, int len, int type)
{
int matched = 0;
- char *ptr;
+ int slen;
switch (type) {
case MATCH_FULL:
@@ -1706,8 +1706,8 @@
matched = 1;
break;
case MATCH_END_ONLY:
- ptr = strstr(str, regex);
- if (ptr && (ptr[len] == 0))
+ slen = strlen(str);
+ if (slen >= len && memcmp(str + slen - len, regex, len) == 0)
matched = 1;
break;
}
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 2326b04..edefe3b 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2869,7 +2869,7 @@
* Splice the empty reader page into the list around the head.
*/
reader = rb_set_head_page(cpu_buffer);
- cpu_buffer->reader_page->list.next = reader->list.next;
+ cpu_buffer->reader_page->list.next = rb_list_head(reader->list.next);
cpu_buffer->reader_page->list.prev = reader->list.prev;
/*
@@ -2906,7 +2906,7 @@
*
* Now make the new head point back to the reader page.
*/
- reader->list.next->prev = &cpu_buffer->reader_page->list;
+ rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list;
rb_inc_page(cpu_buffer, &cpu_buffer->head_page);
/* Finally update the reader page to the new head */
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 50504cb..e42af9a 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -211,8 +211,9 @@
{
char **addr = (char **)(event + pred->offset);
int cmp, match;
+ int len = strlen(*addr) + 1; /* including tailing '\0' */
- cmp = pred->regex.match(*addr, &pred->regex, pred->regex.field_len);
+ cmp = pred->regex.match(*addr, &pred->regex, len);
match = cmp ^ pred->not;
@@ -251,7 +252,18 @@
return 0;
}
-/* Basic regex callbacks */
+/*
+ * regex_match_foo - Basic regex callbacks
+ *
+ * @str: the string to be searched
+ * @r: the regex structure containing the pattern string
+ * @len: the length of the string to be searched (including '\0')
+ *
+ * Note:
+ * - @str might not be NULL-terminated if it's of type DYN_STRING
+ * or STATIC_STRING
+ */
+
static int regex_match_full(char *str, struct regex *r, int len)
{
if (strncmp(str, r->pattern, len) == 0)
@@ -261,23 +273,24 @@
static int regex_match_front(char *str, struct regex *r, int len)
{
- if (strncmp(str, r->pattern, len) == 0)
+ if (strncmp(str, r->pattern, r->len) == 0)
return 1;
return 0;
}
static int regex_match_middle(char *str, struct regex *r, int len)
{
- if (strstr(str, r->pattern))
+ if (strnstr(str, r->pattern, len))
return 1;
return 0;
}
static int regex_match_end(char *str, struct regex *r, int len)
{
- char *ptr = strstr(str, r->pattern);
+ int strlen = len - 1;
- if (ptr && (ptr[r->len] == 0))
+ if (strlen >= r->len &&
+ memcmp(str + strlen - r->len, r->pattern, r->len) == 0)
return 1;
return 0;
}
@@ -781,10 +794,8 @@
pred->regex.field_len = field->size;
} else if (field->filter_type == FILTER_DYN_STRING)
fn = filter_pred_strloc;
- else {
+ else
fn = filter_pred_pchar;
- pred->regex.field_len = strlen(pred->regex.pattern);
- }
} else {
if (field->is_signed)
ret = strict_strtoll(pred->regex.pattern, 0, &val);
diff --git a/lib/string.c b/lib/string.c
index 9f75b4e..a1cdcfcc 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -667,7 +667,7 @@
*/
char *strstr(const char *s1, const char *s2)
{
- int l1, l2;
+ size_t l1, l2;
l2 = strlen(s2);
if (!l2)
@@ -684,6 +684,31 @@
EXPORT_SYMBOL(strstr);
#endif
+#ifndef __HAVE_ARCH_STRNSTR
+/**
+ * strnstr - Find the first substring in a length-limited string
+ * @s1: The string to be searched
+ * @s2: The string to search for
+ * @len: the maximum number of characters to search
+ */
+char *strnstr(const char *s1, const char *s2, size_t len)
+{
+ size_t l1 = len, l2;
+
+ l2 = strlen(s2);
+ if (!l2)
+ return (char *)s1;
+ while (l1 >= l2) {
+ l1--;
+ if (!memcmp(s1, s2, l2))
+ return (char *)s1;
+ s1++;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(strnstr);
+#endif
+
#ifndef __HAVE_ARCH_MEMCHR
/**
* memchr - Find a character in an area of memory.
diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c
index 05e1559..215447c 100644
--- a/lib/zlib_inflate/inffast.c
+++ b/lib/zlib_inflate/inffast.c
@@ -4,12 +4,25 @@
*/
#include <linux/zutil.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
#include "inftrees.h"
#include "inflate.h"
#include "inffast.h"
+/* Only do the unaligned "Faster" variant when
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set
+ *
+ * On powerpc, it won't be as we don't include autoconf.h
+ * automatically for the boot wrapper, which is intended as
+ * we run in an environment where we may not be able to deal
+ * with (even rare) alignment faults. In addition, we do not
+ * define __KERNEL__ for arch/powerpc/boot unlike x86
+ */
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#endif
+
#ifndef ASMINF
/* Allow machine dependent optimization for post-increment or pre-increment.
@@ -243,6 +256,7 @@
}
}
else {
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
unsigned short *sout;
unsigned long loops;
@@ -284,6 +298,20 @@
}
if (len & 1)
PUP(out) = PUP(from);
+#else /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+ from = out - dist; /* copy direct from output */
+ do { /* minimum length is three */
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
+ } while (len > 2);
+ if (len) {
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
+ }
+#endif /* !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
}
}
else if ((op & 64) == 0) { /* 2nd level distance code */
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index e91b81b..94cd94d 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2088,7 +2088,7 @@
entry = pte_mkwrite(pte_mkdirty(huge_ptep_get(ptep)));
if (huge_ptep_set_access_flags(vma, address, ptep, entry, 1)) {
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, ptep);
}
}
@@ -2559,7 +2559,7 @@
entry = pte_mkyoung(entry);
if (huge_ptep_set_access_flags(vma, address, ptep, entry,
flags & FAULT_FLAG_WRITE))
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, ptep);
out_page_table_lock:
spin_unlock(&mm->page_table_lock);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 488b644..954032b 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2586,7 +2586,7 @@
if (free_all)
goto try_to_free;
move_account:
- while (mem->res.usage > 0) {
+ do {
ret = -EBUSY;
if (cgroup_task_count(cgrp) || !list_empty(&cgrp->children))
goto out;
@@ -2614,8 +2614,8 @@
if (ret == -ENOMEM)
goto try_to_free;
cond_resched();
- }
- ret = 0;
+ /* "ret" should also be checked to ensure all lists are empty. */
+ } while (mem->res.usage > 0 || ret);
out:
css_put(&mem->css);
return ret;
@@ -2648,10 +2648,7 @@
}
lru_add_drain();
/* try move_account...there may be some *locked* pages. */
- if (mem->res.usage)
- goto move_account;
- ret = 0;
- goto out;
+ goto move_account;
}
int mem_cgroup_force_empty_write(struct cgroup *cont, unsigned int event)
diff --git a/mm/memory.c b/mm/memory.c
index 09e4b1b..72fb5f3 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1593,7 +1593,7 @@
/* Ok, finally just insert the thing.. */
entry = pte_mkspecial(pfn_pte(pfn, prot));
set_pte_at(mm, addr, pte, entry);
- update_mmu_cache(vma, addr, entry); /* XXX: why not for insert_page? */
+ update_mmu_cache(vma, addr, pte); /* XXX: why not for insert_page? */
retval = 0;
out_unlock:
@@ -2116,7 +2116,7 @@
entry = pte_mkyoung(orig_pte);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
if (ptep_set_access_flags(vma, address, page_table, entry,1))
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
ret |= VM_FAULT_WRITE;
goto unlock;
}
@@ -2185,7 +2185,7 @@
* new page to be mapped directly into the secondary page table.
*/
set_pte_at_notify(mm, address, page_table, entry);
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
if (old_page) {
/*
* Only after switching the pte to the new page may
@@ -2629,7 +2629,7 @@
}
/* No need to invalidate - it was non-present before */
- update_mmu_cache(vma, address, pte);
+ update_mmu_cache(vma, address, page_table);
unlock:
pte_unmap_unlock(page_table, ptl);
out:
@@ -2694,7 +2694,7 @@
set_pte_at(mm, address, page_table, entry);
/* No need to invalidate - it was non-present before */
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
unlock:
pte_unmap_unlock(page_table, ptl);
return 0;
@@ -2855,7 +2855,7 @@
set_pte_at(mm, address, page_table, entry);
/* no need to invalidate: a not-present page won't be cached */
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
} else {
if (charged)
mem_cgroup_uncharge_page(page);
@@ -2992,7 +2992,7 @@
}
entry = pte_mkyoung(entry);
if (ptep_set_access_flags(vma, address, pte, entry, flags & FAULT_FLAG_WRITE)) {
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, pte);
} else {
/*
* This is needed only for protection faults but the arch code
diff --git a/mm/migrate.c b/mm/migrate.c
index efddbf0..e58e5da 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -134,7 +134,7 @@
page_add_file_rmap(new);
/* No need to invalidate - it was non-present before */
- update_mmu_cache(vma, addr, pte);
+ update_mmu_cache(vma, addr, ptep);
unlock:
pte_unmap_unlock(ptep, ptl);
out:
diff --git a/mm/nommu.c b/mm/nommu.c
index 1777386..48a2ecf 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -552,11 +552,11 @@
static void __put_nommu_region(struct vm_region *region)
__releases(nommu_region_sem)
{
- kenter("%p{%d}", region, atomic_read(®ion->vm_usage));
+ kenter("%p{%d}", region, region->vm_usage);
BUG_ON(!nommu_region_tree.rb_node);
- if (atomic_dec_and_test(®ion->vm_usage)) {
+ if (--region->vm_usage == 0) {
if (region->vm_top > region->vm_start)
delete_nommu_region(region);
up_write(&nommu_region_sem);
@@ -1205,7 +1205,7 @@
if (!vma)
goto error_getting_vma;
- atomic_set(®ion->vm_usage, 1);
+ region->vm_usage = 1;
region->vm_flags = vm_flags;
region->vm_pgoff = pgoff;
@@ -1272,7 +1272,7 @@
}
/* we've found a region we can share */
- atomic_inc(&pregion->vm_usage);
+ pregion->vm_usage++;
vma->vm_region = pregion;
start = pregion->vm_start;
start += (pgoff - pregion->vm_pgoff) << PAGE_SHIFT;
@@ -1289,7 +1289,7 @@
vma->vm_region = NULL;
vma->vm_start = 0;
vma->vm_end = 0;
- atomic_dec(&pregion->vm_usage);
+ pregion->vm_usage--;
pregion = NULL;
goto error_just_free;
}
@@ -1441,10 +1441,9 @@
kenter("");
- /* we're only permitted to split anonymous regions that have a single
- * owner */
- if (vma->vm_file ||
- atomic_read(&vma->vm_region->vm_usage) != 1)
+ /* we're only permitted to split anonymous regions (these should have
+ * only a single usage on the region) */
+ if (vma->vm_file)
return -ENOMEM;
if (mm->map_count >= sysctl_max_map_count)
@@ -1518,7 +1517,7 @@
/* cut the backing region down to size */
region = vma->vm_region;
- BUG_ON(atomic_read(®ion->vm_usage) != 1);
+ BUG_ON(region->vm_usage != 1);
down_write(&nommu_region_sem);
delete_nommu_region(region);
@@ -1762,27 +1761,6 @@
EXPORT_SYMBOL(unmap_mapping_range);
/*
- * ask for an unmapped area at which to create a mapping on a file
- */
-unsigned long get_unmapped_area(struct file *file, unsigned long addr,
- unsigned long len, unsigned long pgoff,
- unsigned long flags)
-{
- unsigned long (*get_area)(struct file *, unsigned long, unsigned long,
- unsigned long, unsigned long);
-
- get_area = current->mm->get_unmapped_area;
- if (file && file->f_op && file->f_op->get_unmapped_area)
- get_area = file->f_op->get_unmapped_area;
-
- if (!get_area)
- return -ENOSYS;
-
- return get_area(file, addr, len, pgoff, flags);
-}
-EXPORT_SYMBOL(get_unmapped_area);
-
-/*
* Check that a process has enough memory to allocate a new virtual
* mapping. 0 means there is enough memory for the allocation to
* succeed and -ENOMEM implies there is not.
@@ -1936,3 +1914,65 @@
mmput(mm);
return len;
}
+
+/**
+ * nommu_shrink_inode_mappings - Shrink the shared mappings on an inode
+ * @inode: The inode to check
+ * @size: The current filesize of the inode
+ * @newsize: The proposed filesize of the inode
+ *
+ * Check the shared mappings on an inode on behalf of a shrinking truncate to
+ * make sure that that any outstanding VMAs aren't broken and then shrink the
+ * vm_regions that extend that beyond so that do_mmap_pgoff() doesn't
+ * automatically grant mappings that are too large.
+ */
+int nommu_shrink_inode_mappings(struct inode *inode, size_t size,
+ size_t newsize)
+{
+ struct vm_area_struct *vma;
+ struct prio_tree_iter iter;
+ struct vm_region *region;
+ pgoff_t low, high;
+ size_t r_size, r_top;
+
+ low = newsize >> PAGE_SHIFT;
+ high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+ down_write(&nommu_region_sem);
+
+ /* search for VMAs that fall within the dead zone */
+ vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
+ low, high) {
+ /* found one - only interested if it's shared out of the page
+ * cache */
+ if (vma->vm_flags & VM_SHARED) {
+ up_write(&nommu_region_sem);
+ return -ETXTBSY; /* not quite true, but near enough */
+ }
+ }
+
+ /* reduce any regions that overlap the dead zone - if in existence,
+ * these will be pointed to by VMAs that don't overlap the dead zone
+ *
+ * we don't check for any regions that start beyond the EOF as there
+ * shouldn't be any
+ */
+ vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
+ 0, ULONG_MAX) {
+ if (!(vma->vm_flags & VM_SHARED))
+ continue;
+
+ region = vma->vm_region;
+ r_size = region->vm_top - region->vm_start;
+ r_top = (region->vm_pgoff << PAGE_SHIFT) + r_size;
+
+ if (r_top > newsize) {
+ region->vm_top -= r_top - newsize;
+ if (region->vm_end > region->vm_top)
+ region->vm_end = region->vm_top;
+ }
+ }
+
+ up_write(&nommu_region_sem);
+ return 0;
+}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 4e9f5cc..d2a8889 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1222,10 +1222,10 @@
}
spin_lock_irqsave(&zone->lock, flags);
page = __rmqueue(zone, order, migratetype);
- __mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order));
spin_unlock(&zone->lock);
if (!page)
goto failed;
+ __mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order));
}
__count_zone_vm_events(PGALLOC, zone, 1 << order);
@@ -3998,7 +3998,7 @@
}
/* Merge backward if suitable */
- if (start_pfn < early_node_map[i].end_pfn &&
+ if (start_pfn < early_node_map[i].start_pfn &&
end_pfn >= early_node_map[i].start_pfn) {
early_node_map[i].start_pfn = start_pfn;
return;
diff --git a/mm/truncate.c b/mm/truncate.c
index 342deee..e87e372 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -522,22 +522,20 @@
*/
void truncate_pagecache(struct inode *inode, loff_t old, loff_t new)
{
- if (new < old) {
- struct address_space *mapping = inode->i_mapping;
+ struct address_space *mapping = inode->i_mapping;
- /*
- * unmap_mapping_range is called twice, first simply for
- * efficiency so that truncate_inode_pages does fewer
- * single-page unmaps. However after this first call, and
- * before truncate_inode_pages finishes, it is possible for
- * private pages to be COWed, which remain after
- * truncate_inode_pages finishes, hence the second
- * unmap_mapping_range call must be made for correctness.
- */
- unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, new);
- unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
- }
+ /*
+ * unmap_mapping_range is called twice, first simply for
+ * efficiency so that truncate_inode_pages does fewer
+ * single-page unmaps. However after this first call, and
+ * before truncate_inode_pages finishes, it is possible for
+ * private pages to be COWed, which remain after
+ * truncate_inode_pages finishes, hence the second
+ * unmap_mapping_range call must be made for correctness.
+ */
+ unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
+ truncate_inode_pages(mapping, new);
+ unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
}
EXPORT_SYMBOL(truncate_pagecache);
diff --git a/mm/util.c b/mm/util.c
index 7c35ad9..834db7b 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -220,7 +220,7 @@
}
EXPORT_SYMBOL(strndup_user);
-#ifndef HAVE_ARCH_PICK_MMAP_LAYOUT
+#if defined(CONFIG_MMU) && !defined(HAVE_ARCH_PICK_MMAP_LAYOUT)
void arch_pick_mmap_layout(struct mm_struct *mm)
{
mm->mmap_base = TASK_UNMAPPED_BASE;
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 885207a..c26986c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1922,6 +1922,9 @@
if (!populated_zone(zone))
continue;
+ if (zone_is_all_unreclaimable(zone))
+ continue;
+
if (!zone_watermark_ok(zone, order, high_wmark_pages(zone),
0, 0))
return 1;
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index df159ff..4bac362 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -559,6 +559,11 @@
return skb_dst(skb) ? ip6_dst_idev(skb_dst(skb)) : __in6_dev_get(skb->dev);
}
+static inline struct net *ipv6_skb_net(struct sk_buff *skb)
+{
+ return skb_dst(skb) ? dev_net(skb_dst(skb)->dev) : dev_net(skb->dev);
+}
+
/* Router Alert as of RFC 2711 */
static int ipv6_hop_ra(struct sk_buff *skb, int optoff)
@@ -580,8 +585,8 @@
static int ipv6_hop_jumbo(struct sk_buff *skb, int optoff)
{
const unsigned char *nh = skb_network_header(skb);
+ struct net *net = ipv6_skb_net(skb);
u32 pkt_len;
- struct net *net = dev_net(skb_dst(skb)->dev);
if (nh[optoff + 1] != 4 || (optoff & 3) != 2) {
LIMIT_NETDEBUG(KERN_DEBUG "ipv6_hop_jumbo: wrong jumbo opt length/alignment %d\n",
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 80c16f6..32abae3 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -15,12 +15,14 @@
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <net/mac80211.h>
+#include <net/ieee80211_radiotap.h>
#include "ieee80211_i.h"
#include "sta_info.h"
#include "debugfs_netdev.h"
#include "mesh.h"
#include "led.h"
#include "driver-ops.h"
+#include "wme.h"
/**
* DOC: Interface list locking
@@ -314,7 +316,7 @@
if (sdata->vif.type == NL80211_IFTYPE_STATION)
ieee80211_queue_work(&local->hw, &sdata->u.mgd.work);
- netif_start_queue(dev);
+ netif_tx_start_all_queues(dev);
return 0;
err_del_interface:
@@ -343,7 +345,7 @@
/*
* Stop TX on this interface first.
*/
- netif_stop_queue(dev);
+ netif_tx_stop_all_queues(dev);
/*
* Now delete all active aggregation sessions.
@@ -644,6 +646,12 @@
WARN_ON(flushed);
}
+static u16 ieee80211_netdev_select_queue(struct net_device *dev,
+ struct sk_buff *skb)
+{
+ return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
+}
+
static const struct net_device_ops ieee80211_dataif_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
@@ -652,8 +660,38 @@
.ndo_set_multicast_list = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
+ .ndo_select_queue = ieee80211_netdev_select_queue,
};
+static u16 ieee80211_monitor_select_queue(struct net_device *dev,
+ struct sk_buff *skb)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_hdr *hdr;
+ struct ieee80211_radiotap_header *rtap = (void *)skb->data;
+ u8 *p;
+
+ if (local->hw.queues < 4)
+ return 0;
+
+ if (skb->len < 4 ||
+ skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
+ return 0; /* doesn't matter, frame will be dropped */
+
+ hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
+
+ if (!ieee80211_is_data_qos(hdr->frame_control)) {
+ skb->priority = 7;
+ return ieee802_1d_to_ac[skb->priority];
+ }
+
+ p = ieee80211_get_qos_ctl(hdr);
+ skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
+
+ return ieee80211_downgrade_queue(local, skb);
+}
+
static const struct net_device_ops ieee80211_monitorif_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
@@ -662,6 +700,7 @@
.ndo_set_multicast_list = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
+ .ndo_select_queue = ieee80211_monitor_select_queue,
};
static void ieee80211_if_setup(struct net_device *dev)
@@ -768,8 +807,8 @@
ASSERT_RTNL();
- ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size,
- name, ieee80211_if_setup);
+ ndev = alloc_netdev_mq(sizeof(*sdata) + local->hw.vif_data_size,
+ name, ieee80211_if_setup, local->hw.queues);
if (!ndev)
return -ENOMEM;
dev_net_set(ndev, wiphy_net(local->hw.wiphy));
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index c79e59f..05a18f4 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -942,7 +942,7 @@
ieee80211_recalc_ps(local, -1);
mutex_unlock(&local->iflist_mtx);
- netif_start_queue(sdata->dev);
+ netif_tx_start_all_queues(sdata->dev);
netif_carrier_on(sdata->dev);
}
@@ -1074,7 +1074,7 @@
* time -- we don't want the scan code to enable queues.
*/
- netif_stop_queue(sdata->dev);
+ netif_tx_stop_all_queues(sdata->dev);
netif_carrier_off(sdata->dev);
rcu_read_lock();
@@ -1963,7 +1963,9 @@
rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
break;
case IEEE80211_STYPE_ACTION:
- /* XXX: differentiate, can only happen for CSA now! */
+ if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT)
+ break;
+
ieee80211_sta_process_chanswitch(sdata,
&mgmt->u.action.u.chan_switch.sw_elem,
ifmgd->associated);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 9f2807a..82a30c1 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1746,7 +1746,9 @@
memset(info, 0, sizeof(*info));
info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
info->control.vif = &rx->sdata->vif;
- ieee80211_select_queue(local, fwd_skb);
+ skb_set_queue_mapping(skb,
+ ieee80211_select_queue(rx->sdata, fwd_skb));
+ ieee80211_set_qos_hdr(local, skb);
if (is_multicast_ether_addr(fwd_hdr->addr1))
IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
fwded_mcast);
@@ -2013,6 +2015,10 @@
}
break;
default:
+ /* do not process rejected action frames */
+ if (mgmt->u.action.category & 0x80)
+ return RX_DROP_MONITOR;
+
return RX_CONTINUE;
}
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index f1a4c71..f934c96 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -353,10 +353,10 @@
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.associated) {
ieee80211_scan_ps_disable(sdata);
- netif_wake_queue(sdata->dev);
+ netif_tx_wake_all_queues(sdata->dev);
}
} else
- netif_wake_queue(sdata->dev);
+ netif_tx_wake_all_queues(sdata->dev);
/* re-enable beaconing */
if (sdata->vif.type == NL80211_IFTYPE_AP ||
@@ -411,7 +411,7 @@
* are handled in the scan state machine
*/
if (sdata->vif.type != NL80211_IFTYPE_STATION)
- netif_stop_queue(sdata->dev);
+ netif_tx_stop_all_queues(sdata->dev);
}
mutex_unlock(&local->iflist_mtx);
@@ -575,7 +575,7 @@
continue;
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- netif_stop_queue(sdata->dev);
+ netif_tx_stop_all_queues(sdata->dev);
if (sdata->u.mgd.associated)
ieee80211_scan_ps_enable(sdata);
}
@@ -610,7 +610,7 @@
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.associated)
ieee80211_scan_ps_disable(sdata);
- netif_wake_queue(sdata->dev);
+ netif_tx_wake_all_queues(sdata->dev);
}
}
mutex_unlock(&local->iflist_mtx);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 27ceaef..ac210b5 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1512,7 +1512,7 @@
return;
}
- ieee80211_select_queue(local, skb);
+ ieee80211_set_qos_hdr(local, skb);
ieee80211_tx(sdata, skb, false);
rcu_read_unlock();
}
@@ -2291,6 +2291,9 @@
skb_set_network_header(skb, 0);
skb_set_transport_header(skb, 0);
+ /* send all internal mgmt frames on VO */
+ skb_set_queue_mapping(skb, 0);
+
/*
* The other path calling ieee80211_xmit is from the tasklet,
* and while we can handle concurrent transmissions locking
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index dc76267..3848140 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -269,6 +269,7 @@
enum queue_stop_reason reason)
{
struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
if (WARN_ON(queue >= hw->queues))
return;
@@ -281,6 +282,11 @@
if (!skb_queue_empty(&local->pending[queue]))
tasklet_schedule(&local->tx_pending_tasklet);
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(sdata, &local->interfaces, list)
+ netif_tx_wake_queue(netdev_get_tx_queue(sdata->dev, queue));
+ rcu_read_unlock();
}
void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
@@ -305,11 +311,17 @@
enum queue_stop_reason reason)
{
struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
if (WARN_ON(queue >= hw->queues))
return;
__set_bit(reason, &local->queue_stop_reasons[queue]);
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(sdata, &local->interfaces, list)
+ netif_tx_stop_queue(netdev_get_tx_queue(sdata->dev, queue));
+ rcu_read_unlock();
}
void ieee80211_stop_queue_by_reason(struct ieee80211_hw *hw, int queue,
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index b19b769..79d887d 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -44,22 +44,69 @@
}
-/* Indicate which queue to use. */
-static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb)
+/* Indicate which queue to use. */
+u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_local *local = sdata->local;
+ struct sta_info *sta = NULL;
+ u32 sta_flags = 0;
+ const u8 *ra = NULL;
+ bool qos = false;
- if (!ieee80211_is_data(hdr->frame_control)) {
- /* management frames go on AC_VO queue, but are sent
- * without QoS control fields */
- return 0;
+ if (local->hw.queues < 4 || skb->len < 6) {
+ skb->priority = 0; /* required for correct WPA/11i MIC */
+ return min_t(u16, local->hw.queues - 1,
+ ieee802_1d_to_ac[skb->priority]);
}
- if (0 /* injected */) {
- /* use AC from radiotap */
+ rcu_read_lock();
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP_VLAN:
+ rcu_read_lock();
+ sta = rcu_dereference(sdata->u.vlan.sta);
+ if (sta)
+ sta_flags = get_sta_flags(sta);
+ rcu_read_unlock();
+ if (sta)
+ break;
+ case NL80211_IFTYPE_AP:
+ ra = skb->data;
+ break;
+ case NL80211_IFTYPE_WDS:
+ ra = sdata->u.wds.remote_addr;
+ break;
+#ifdef CONFIG_MAC80211_MESH
+ case NL80211_IFTYPE_MESH_POINT:
+ /*
+ * XXX: This is clearly broken ... but already was before,
+ * because ieee80211_fill_mesh_addresses() would clear A1
+ * except for multicast addresses.
+ */
+ break;
+#endif
+ case NL80211_IFTYPE_STATION:
+ ra = sdata->u.mgd.bssid;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ ra = skb->data;
+ break;
+ default:
+ break;
}
- if (!ieee80211_is_data_qos(hdr->frame_control)) {
+ if (!sta && ra && !is_multicast_ether_addr(ra)) {
+ sta = sta_info_get(local, ra);
+ if (sta)
+ sta_flags = get_sta_flags(sta);
+ }
+
+ if (sta_flags & WLAN_STA_WME)
+ qos = true;
+
+ rcu_read_unlock();
+
+ if (!qos) {
skb->priority = 0; /* required for correct WPA/11i MIC */
return ieee802_1d_to_ac[skb->priority];
}
@@ -68,6 +115,12 @@
* data frame has */
skb->priority = cfg80211_classify8021d(skb);
+ return ieee80211_downgrade_queue(local, skb);
+}
+
+u16 ieee80211_downgrade_queue(struct ieee80211_local *local,
+ struct sk_buff *skb)
+{
/* in case we are a client verify acm is not set for this ac */
while (unlikely(local->wmm_acm & BIT(skb->priority))) {
if (wme_downgrade_ac(skb)) {
@@ -85,24 +138,17 @@
return ieee802_1d_to_ac[skb->priority];
}
-void ieee80211_select_queue(struct ieee80211_local *local, struct sk_buff *skb)
+void ieee80211_set_qos_hdr(struct ieee80211_local *local, struct sk_buff *skb)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- u16 queue;
- u8 tid;
+ struct ieee80211_hdr *hdr = (void *)skb->data;
- queue = classify80211(local, skb);
- if (unlikely(queue >= local->hw.queues))
- queue = local->hw.queues - 1;
-
- /*
- * Now we know the 1d priority, fill in the QoS header if
- * there is one (and we haven't done this before).
- */
+ /* Fill in the QoS header if there is one. */
if (ieee80211_is_data_qos(hdr->frame_control)) {
u8 *p = ieee80211_get_qos_ctl(hdr);
- u8 ack_policy = 0;
+ u8 ack_policy = 0, tid;
+
tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+
if (unlikely(local->wifi_wme_noack_test))
ack_policy |= QOS_CONTROL_ACK_POLICY_NOACK <<
QOS_CONTROL_ACK_POLICY_SHIFT;
@@ -110,6 +156,4 @@
*p++ = ack_policy | tid;
*p = 0;
}
-
- skb_set_queue_mapping(skb, queue);
}
diff --git a/net/mac80211/wme.h b/net/mac80211/wme.h
index d4fd87c..6053b1c 100644
--- a/net/mac80211/wme.h
+++ b/net/mac80211/wme.h
@@ -20,7 +20,11 @@
extern const int ieee802_1d_to_ac[8];
-void ieee80211_select_queue(struct ieee80211_local *local,
- struct sk_buff *skb);
+u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb);
+void ieee80211_set_qos_hdr(struct ieee80211_local *local, struct sk_buff *skb);
+u16 ieee80211_downgrade_queue(struct ieee80211_local *local,
+ struct sk_buff *skb);
+
#endif /* _WME_H */
diff --git a/net/wireless/core.c b/net/wireless/core.c
index c2a2c56..92b8124 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -745,9 +745,9 @@
mutex_unlock(&rdev->devlist_mtx);
dev_put(dev);
}
-#ifdef CONFIG_CFG80211_WEXT
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+#ifdef CONFIG_CFG80211_WEXT
wdev_lock(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
@@ -760,10 +760,10 @@
break;
}
wdev_unlock(wdev);
+#endif
rdev->opencount++;
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
-#endif
break;
case NETDEV_UNREGISTER:
/*
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index baa898a..7a0754c 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1690,7 +1690,7 @@
request->wiphy_idx = WIPHY_IDX_STALE;
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
- request->initiator = NL80211_REGDOM_SET_BY_USER,
+ request->initiator = NL80211_REGDOM_SET_BY_USER;
queue_regulatory_request(request);
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 0fe48cd..f9bdf26 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -219,8 +219,13 @@
fsize=$$(stat -c "%s" $$F); \
dec_size=$$(expr $$dec_size + $$fsize); \
done; \
-printf "%08x" $$dec_size | \
- sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g' \
+printf "%08x\n" $$dec_size | \
+ sed 's/\(..\)/\1 /g' | { \
+ read ch0 ch1 ch2 ch3; \
+ for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
+ printf '%s%03o' '\\' $$((0x$$ch)); \
+ done; \
+ } \
)
quiet_cmd_bzip2 = BZIP2 $@
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index 5f0fcb7..ce3e40b 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -154,7 +154,7 @@
if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) {
$target = $1;
}
- if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+ if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
$function = $1;
$func_offset = $2;
}
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 6f426af..220213e 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -804,7 +804,7 @@
match = strstr(symbol, name);
if (!match)
return 0;
- return match[strlen(symbol)] == '\0';
+ return match[strlen(name)] == '\0';
}
static void do_table(void *symval, unsigned long size,
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 92f09fe..ea6f6e3 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -194,7 +194,7 @@
}
}
-if ($arch eq "x86") {
+if ($arch =~ /(x86(_64)?)|(i386)/) {
if ($bits == 64) {
$arch = "x86_64";
} else {
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index 8a00ade..2aceebf 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -80,9 +80,8 @@
return tomoyo_find_next_domain(bprm);
/*
* Read permission is checked against interpreters using next domain.
- * '1' is the result of open_to_namei_flags(O_RDONLY).
*/
- return tomoyo_check_open_permission(domain, &bprm->file->f_path, 1);
+ return tomoyo_check_open_permission(domain, &bprm->file->f_path, O_RDONLY);
}
static int tomoyo_path_truncate(struct path *path, loff_t length,
@@ -184,10 +183,6 @@
static int tomoyo_dentry_open(struct file *f, const struct cred *cred)
{
int flags = f->f_flags;
-
- if ((flags + 1) & O_ACCMODE)
- flags++;
- flags |= f->f_flags & (O_APPEND | O_TRUNC);
/* Don't check read permission here if called from do_execve(). */
if (current->in_execve)
return 0;
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 7872a02..563d196 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -468,5 +468,5 @@
unregister_chrdev(major, "alsa");
}
-module_init(alsa_sound_init)
-module_exit(alsa_sound_exit)
+subsys_initcall(alsa_sound_init);
+module_exit(alsa_sound_exit);
diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c
index 7fe1226..0c164e5 100644
--- a/sound/core/sound_oss.c
+++ b/sound/core/sound_oss.c
@@ -93,7 +93,7 @@
default:
return -EINVAL;
}
- if (snd_BUG_ON(minor < 0 || minor >= SNDRV_OSS_MINORS))
+ if (minor < 0 || minor >= SNDRV_OSS_MINORS)
return -EINVAL;
return minor;
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index e3caa78..3f92def 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1230,6 +1230,8 @@
return; /* invalid entry */
}
}
+ if (!ext || !fixed)
+ return;
if (!(get_wcaps(codec, ext) & AC_WCAP_UNSOL_CAP))
return; /* no unsol support */
snd_printdd("realtek: Enable auto-mic switch on NID 0x%x/0x%x\n",
@@ -4812,6 +4814,49 @@
spec->auto_mic = 0; /* disable auto-mic to be sure */
}
+/* choose the ADC/MUX containing the input pin and initialize the setup */
+static void fixup_single_adc(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t pin;
+ int i;
+
+ /* search for the input pin; there must be only one */
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ if (spec->autocfg.input_pins[i]) {
+ pin = spec->autocfg.input_pins[i];
+ break;
+ }
+ }
+ if (!pin)
+ return;
+
+ /* set the default connection to that pin */
+ for (i = 0; i < spec->num_adc_nids; i++) {
+ hda_nid_t cap = spec->capsrc_nids ?
+ spec->capsrc_nids[i] : spec->adc_nids[i];
+ int idx;
+
+ idx = get_connection_index(codec, cap, pin);
+ if (idx < 0)
+ continue;
+ /* use only this ADC */
+ if (spec->capsrc_nids)
+ spec->capsrc_nids += i;
+ spec->adc_nids += i;
+ spec->num_adc_nids = 1;
+ /* select or unmute this route */
+ if (get_wcaps_type(get_wcaps(codec, cap)) == AC_WID_AUD_MIX) {
+ snd_hda_codec_amp_stereo(codec, cap, HDA_INPUT, idx,
+ HDA_AMP_MUTE, 0);
+ } else {
+ snd_hda_codec_write_cache(codec, cap, 0,
+ AC_VERB_SET_CONNECT_SEL, idx);
+ }
+ return;
+ }
+}
+
static void set_capture_mixer(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -4824,14 +4869,15 @@
alc_capture_mixer3 },
};
if (spec->num_adc_nids > 0 && spec->num_adc_nids <= 3) {
- int mux;
- if (spec->auto_mic) {
- mux = 0;
+ int mux = 0;
+ if (spec->auto_mic)
fixup_automic_adc(codec);
- } else if (spec->input_mux && spec->input_mux->num_items > 1)
- mux = 1;
- else
- mux = 0;
+ else if (spec->input_mux) {
+ if (spec->input_mux->num_items > 1)
+ mux = 1;
+ else if (spec->input_mux->num_items == 1)
+ fixup_single_adc(codec);
+ }
spec->cap_mixer = caps[mux][spec->num_adc_nids - 1];
}
}
@@ -7094,8 +7140,8 @@
HDA_BIND_MUTE ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
HDA_BIND_MUTE ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("HP Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
- HDA_BIND_MUTE ("HP Playback Switch", 0x0f, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
@@ -7496,6 +7542,7 @@
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x14, AC_VERB_SET_CONNECT_SEL, 0x03},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
/* Front Mic pin: input vref at 80% */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
@@ -7680,6 +7727,27 @@
spec->autocfg.speaker_pins[0] = 0x14;
}
+static void alc885_mb5_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+ snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+
+}
+
+static void alc885_mb5_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ /* Headphone insertion or removal. */
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc885_mb5_automute(codec);
+}
+
static void alc885_imac91_automute(struct hda_codec *codec)
{
unsigned int present;
@@ -9126,6 +9194,8 @@
.input_mux = &mb5_capture_source,
.dig_out_nid = ALC882_DIGOUT_NID,
.dig_in_nid = ALC882_DIGIN_NID,
+ .unsol_event = alc885_mb5_unsol_event,
+ .init_hook = alc885_mb5_automute,
},
[ALC885_MACPRO] = {
.mixers = { alc882_macpro_mixer },
@@ -11179,7 +11249,7 @@
}
#define alc262_auto_create_input_ctls \
- alc880_auto_create_input_ctls
+ alc882_auto_create_input_ctls
/*
* generic initialization of ADC, input mixers and output mixers
@@ -14855,6 +14925,8 @@
spec->stream_digital_playback = &alc861_pcm_digital_playback;
spec->stream_digital_capture = &alc861_pcm_digital_capture;
+ if (!spec->cap_mixer)
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x23, 0, HDA_OUTPUT);
spec->vmaster_nid = 0x03;
@@ -17251,7 +17323,7 @@
SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
ALC662_3ST_6ch_DIG),
- SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4),
+ SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB20x", ALC662_AUTO),
SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
ALC662_3ST_6ch_DIG),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 2291a83..799ba25 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4730,6 +4730,26 @@
}
}
+static int hp_blike_system(u32 subsystem_id);
+
+static void set_hp_led_gpio(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ switch (codec->vendor_id) {
+ case 0x111d7608:
+ /* GPIO 0 */
+ spec->gpio_led = 0x01;
+ break;
+ case 0x111d7600:
+ case 0x111d7601:
+ case 0x111d7602:
+ case 0x111d7603:
+ /* GPIO 3 */
+ spec->gpio_led = 0x08;
+ break;
+ }
+}
+
/*
* This method searches for the mute LED GPIO configuration
* provided as OEM string in SMBIOS. The format of that string
@@ -4741,6 +4761,14 @@
*
* So, HP B-series like systems may have HP_Mute_LED_0 (current models)
* or HP_Mute_LED_0_3 (future models) OEM SMBIOS strings
+ *
+ *
+ * The dv-series laptops don't seem to have the HP_Mute_LED* strings in
+ * SMBIOS - at least the ones I have seen do not have them - which include
+ * my own system (HP Pavilion dv6-1110ax) and my cousin's
+ * HP Pavilion dv9500t CTO.
+ * Need more information on whether it is true across the entire series.
+ * -- kunal
*/
static int find_mute_led_gpio(struct hda_codec *codec)
{
@@ -4751,28 +4779,27 @@
while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING,
NULL, dev))) {
if (sscanf(dev->name, "HP_Mute_LED_%d_%d",
- &spec->gpio_led_polarity,
- &spec->gpio_led) == 2) {
+ &spec->gpio_led_polarity,
+ &spec->gpio_led) == 2) {
spec->gpio_led = 1 << spec->gpio_led;
return 1;
}
if (sscanf(dev->name, "HP_Mute_LED_%d",
- &spec->gpio_led_polarity) == 1) {
- switch (codec->vendor_id) {
- case 0x111d7608:
- /* GPIO 0 */
- spec->gpio_led = 0x01;
- return 1;
- case 0x111d7600:
- case 0x111d7601:
- case 0x111d7602:
- case 0x111d7603:
- /* GPIO 3 */
- spec->gpio_led = 0x08;
- return 1;
- }
+ &spec->gpio_led_polarity) == 1) {
+ set_hp_led_gpio(codec);
+ return 1;
}
}
+
+ /*
+ * Fallback case - if we don't find the DMI strings,
+ * we statically set the GPIO - if not a B-series system.
+ */
+ if (!hp_blike_system(codec->subsystem_id)) {
+ set_hp_led_gpio(codec);
+ spec->gpio_led_polarity = 1;
+ return 1;
+ }
}
return 0;
}
@@ -5548,6 +5575,8 @@
spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e);
+ snd_printdd("Found board config: %d\n", spec->board_config);
+
switch (spec->board_config) {
case STAC_HP_M4:
/* enable internal microphone */
diff --git a/sound/sound_core.c b/sound/sound_core.c
index dbca7c9..7c2d677 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -61,7 +61,7 @@
class_destroy(sound_class);
}
-module_init(init_soundcore);
+subsys_initcall(init_soundcore);
module_exit(cleanup_soundcore);
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 652a470..2e7fa3a 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -250,7 +250,19 @@
# explicitly what architecture to check for. Fix this up for yours..
SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
-ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null "$(QUIET_STDERR)" && echo y"), y)
+ifeq ($(V), 2)
+ QUIET_STDERR = ">/dev/null"
+else
+ QUIET_STDERR = ">/dev/null 2>&1"
+endif
+
+BITBUCKET = "/dev/null"
+
+ifneq ($(shell sh -c "(echo '\#include <stdio.h>'; echo 'int main(void) { return puts(\"hi\"); }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y)
+ BITBUCKET = .perf.dev.null
+endif
+
+ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y)
CFLAGS := $(CFLAGS) -fstack-protector-all
endif
@@ -451,11 +463,6 @@
PERFLIBS = $(LIB_FILE)
-ifeq ($(V), 2)
- QUIET_STDERR = ">/dev/null"
-else
- QUIET_STDERR = ">/dev/null 2>&1"
-endif
#
# Platform specific tweaks
#
@@ -483,19 +490,19 @@
PTHREAD_LIBS =
endif
-ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
-ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
endif
- ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
BASIC_CFLAGS += -DLIBELF_NO_MMAP
endif
else
msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
endif
-ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include <dwarf.h>'; echo '\#include <libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include <dwarf.h>'; echo '\#include <libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(warning No libdwarf.h found or old libdwarf.h found, disables dwarf support. Please install libdwarf-dev/libdwarf-devel >= 20081231);
BASIC_CFLAGS += -DNO_LIBDWARF
else
@@ -509,7 +516,7 @@
PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
endif
-ifneq ($(shell sh -c "(echo '\#include <EXTERN.h>'; echo '\#include <perl.h>'; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o /dev/null $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <EXTERN.h>'; echo '\#include <perl.h>'; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o $(BITBUCKET) $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
BASIC_CFLAGS += -DNO_LIBPERL
else
ALL_LDFLAGS += $(PERL_EMBED_LDOPTS)
@@ -519,20 +526,20 @@
ifdef NO_DEMANGLE
BASIC_CFLAGS += -DNO_DEMANGLE
else
- has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
+ has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd),y)
EXTLIBS += -lbfd
else
- has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
+ has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd_iberty),y)
EXTLIBS += -lbfd -liberty
else
- has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
+ has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd_iberty_z),y)
EXTLIBS += -lbfd -liberty -lz
else
- has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
+ has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
ifeq ($(has_cplus_demangle),y)
EXTLIBS += -liberty
BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
@@ -780,7 +787,7 @@
SHELL = $(SHELL_PATH)
-all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS
+all:: .perf.dev.null shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS
ifneq (,$X)
$(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';)
endif
@@ -1107,6 +1114,11 @@
.PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
.PHONY: .FORCE-PERF-BUILD-OPTIONS
+.perf.dev.null:
+ touch .perf.dev.null
+
+.INTERMEDIATE: .perf.dev.null
+
### Make sure built-ins do not have dups and listed in perf.c
#
check-builtins::
