diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h
index 3343824..040f721 100644
--- a/drivers/scsi/3w-9xxx.h
+++ b/drivers/scsi/3w-9xxx.h
@@ -61,7 +61,7 @@
 	{0x0000, "AEN queue empty"},
 	{0x0001, "Controller reset occurred"},
 	{0x0002, "Degraded unit detected"},
-	{0x0003, "Controller error occured"},
+	{0x0003, "Controller error occurred"},
 	{0x0004, "Background rebuild failed"},
 	{0x0005, "Background rebuild done"},
 	{0x0006, "Incomplete unit detected"},
diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h
index 8b9f9d1..49dcf03 100644
--- a/drivers/scsi/3w-xxxx.h
+++ b/drivers/scsi/3w-xxxx.h
@@ -8,7 +8,7 @@
 
    Copyright (C) 1999-2010 3ware Inc.
 
-   Kernel compatiblity By:	Andre Hedrick <andre@suse.com>
+   Kernel compatibility By:	Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000	Andre Hedrick <andre@suse.com>
 
    This program is free software; you can redistribute it and/or modify
diff --git a/drivers/scsi/53c700.scr b/drivers/scsi/53c700.scr
index a064a09..ec822e3 100644
--- a/drivers/scsi/53c700.scr
+++ b/drivers/scsi/53c700.scr
@@ -31,7 +31,7 @@
 ABSOLUTE	ReceiveMsgAddress = 0	; Addr to receive msg
 ;
 ; This is the magic component for handling scatter-gather.  Each of the
-; SG components is preceeded by a script fragment which moves the
+; SG components is preceded by a script fragment which moves the
 ; necessary amount of data and jumps to the next SG segment.  The final
 ; SG segment jumps back to .  However, this address is the first SG script
 ; segment.
diff --git a/drivers/scsi/53c700_d.h_shipped b/drivers/scsi/53c700_d.h_shipped
index 0b42a51..aa623da 100644
--- a/drivers/scsi/53c700_d.h_shipped
+++ b/drivers/scsi/53c700_d.h_shipped
@@ -34,7 +34,7 @@
 ABSOLUTE	ReceiveMsgAddress = 0	; Addr to receive msg
 ;
 ; This is the magic component for handling scatter-gather.  Each of the
-; SG components is preceeded by a script fragment which moves the
+; SG components is preceded by a script fragment which moves the
 ; necessary amount of data and jumps to the next SG segment.  The final
 ; SG segment jumps back to .  However, this address is the first SG script
 ; segment.
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index e40cdfb..dcd716d 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -2509,7 +2509,7 @@
 				WR_HARPOON(port + hp_autostart_3,
 					   (SELECT + SELCHK_STRT));
 
-				/* Setup our STATE so we know what happend when
+				/* Setup our STATE so we know what happened when
 				   the wheels fall off. */
 				currSCCB->Sccb_scsistat = SELECT_ST;
 
@@ -2900,7 +2900,7 @@
  *
  * Function: FPT_sdecm
  *
- * Description: Determine the proper responce to the message from the
+ * Description: Determine the proper response to the message from the
  *              target device.
  *
  *---------------------------------------------------------------------*/
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index e7cd2fc..165e4dd86 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -1198,12 +1198,12 @@
 				 */
 
 				if ((NCR5380_read(MODE_REG) & MR_DMA) && ((basr & BASR_END_DMA_TRANSFER) || !(basr & BASR_PHASE_MATCH))) {
-					int transfered;
+					int transferred;
 
 					if (!hostdata->connected)
 						panic("scsi%d : received end of DMA interrupt with no connected cmd\n", instance->hostno);
 
-					transfered = (hostdata->dmalen - NCR5380_dma_residual(instance));
+					transferred = (hostdata->dmalen - NCR5380_dma_residual(instance));
 					hostdata->connected->SCp.this_residual -= transferred;
 					hostdata->connected->SCp.ptr += transferred;
 					hostdata->dmalen = 0;
@@ -1563,7 +1563,7 @@
  *      bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *      maximum number of bytes, 0 if all bytes or transfered or exit
+ *      maximum number of bytes, 0 if all bytes or transferred or exit
  *      is in same phase.
  *
  *      Also, *phase, *count, *data are modified in place.
@@ -1800,7 +1800,7 @@
  *      bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *      maximum number of bytes, 0 if all bytes or transfered or exit
+ *      maximum number of bytes, 0 if all bytes or transferred or exit
  *      is in same phase.
  *
  *      Also, *phase, *count, *data are modified in place.
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 118ce83..0619957 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -747,8 +747,8 @@
  * Arguments: [1] pointer to void [1] int
  *
  * Purpose: Sets SCSI inquiry data strings for vendor, product
- * and revision level. Allows strings to be set in platform dependant
- * files instead of in OS dependant driver source.
+ * and revision level. Allows strings to be set in platform dependent
+ * files instead of in OS dependent driver source.
  */
 
 static void setinqstr(struct aac_dev *dev, void *data, int tindex)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 29ab0001..ffb5878 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1259,7 +1259,7 @@
 #define CACHE_UNSTABLE		2
 
 /*
- *	Lets the client know at which level the data was commited on
+ *	Lets the client know at which level the data was committed on
  *	a write request
  */
 
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index dd7ad3b..e7d0d47 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -421,7 +421,7 @@
 	if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
 		return -EBUSY;
 	/*
-	 *	There are 5 cases with the wait and reponse requested flags.
+	 *	There are 5 cases with the wait and response requested flags.
 	 *	The only invalid cases are if the caller requests to wait and
 	 *	does not request a response and if the caller does not want a
 	 *	response and the Fib is not allocated from pool. If a response
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 081c6de..bfd618a 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4544,7 +4544,7 @@
  * Copy 4 bytes to LRAM.
  *
  * The source data is assumed to be in little-endian order in memory
- * and is maintained in little-endian order when writen to LRAM.
+ * and is maintained in little-endian order when written to LRAM.
  */
 static void
 AscMemDWordCopyPtrToLram(PortAddr iop_base,
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index d058f1a..1c10b79 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -461,7 +461,7 @@
 	/* The Adaptec Spec says the card is so fast that the loops
            will only be executed once in the code below. Even if this
            was true with the fastest processors when the spec was
-           written, it doesn't seem to be true with todays fast
+           written, it doesn't seem to be true with today's fast
            processors. We print a warning if the code is executed more
            often than LOOPCNT_WARN. If this happens, it should be
            investigated. If the count reaches LOOPCNT_MAX, we assume
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
index 95ee503..9b05942 100644
--- a/drivers/scsi/aic7xxx/aic79xx.h
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -473,7 +473,7 @@
  *	o A residual has occurred if SG_FULL_RESID is set in sgptr,
  *	  or residual_sgptr does not have SG_LIST_NULL set.
  *
- *	o We are transfering the last segment if residual_datacnt has
+ *	o We are transferring the last segment if residual_datacnt has
  *	  the SG_LAST_SEG flag set.
  *
  * Host:
@@ -516,7 +516,7 @@
  */
 
 /*
- * Definition of a scatter/gather element as transfered to the controller.
+ * Definition of a scatter/gather element as transferred to the controller.
  * The aic7xxx chips only support a 24bit length.  We use the top byte of
  * the length to store additional address bits and a flag to indicate
  * that a given segment terminates the transfer.  This gives us an
diff --git a/drivers/scsi/aic7xxx/aic79xx.reg b/drivers/scsi/aic7xxx/aic79xx.reg
index 0666c22..7e12c31 100644
--- a/drivers/scsi/aic7xxx/aic79xx.reg
+++ b/drivers/scsi/aic7xxx/aic79xx.reg
@@ -305,7 +305,7 @@
 }
 
 /*
- * Sequencer Interupt Status
+ * Sequencer Interrupt Status
  */
 register SEQINTSTAT {
 	address			0x00C
@@ -685,7 +685,7 @@
 }
 
 /*
- * CMC Recieve Message 0
+ * CMC Receive Message 0
  */
 register CMCRXMSG0 {
 	address			0x090
@@ -696,7 +696,7 @@
 }
 
 /*
- * Overlay Recieve Message 0
+ * Overlay Receive Message 0
  */
 register OVLYRXMSG0 {
 	address			0x090
@@ -732,7 +732,7 @@
 }
 
 /*
- * CMC Recieve Message 1
+ * CMC Receive Message 1
  */
 register CMCRXMSG1 {
 	address			0x091
@@ -742,7 +742,7 @@
 }
 
 /*
- * Overlay Recieve Message 1
+ * Overlay Receive Message 1
  */
 register OVLYRXMSG1 {
 	address			0x091
@@ -777,7 +777,7 @@
 }
 
 /*
- * CMC Recieve Message 2
+ * CMC Receive Message 2
  */
 register CMCRXMSG2 {
 	address			0x092
@@ -787,7 +787,7 @@
 }
 
 /*
- * Overlay Recieve Message 2
+ * Overlay Receive Message 2
  */
 register OVLYRXMSG2 {
 	address			0x092
@@ -816,7 +816,7 @@
 }
 
 /*
- * CMC Recieve Message 3
+ * CMC Receive Message 3
  */
 register CMCRXMSG3 {
 	address			0x093
@@ -826,7 +826,7 @@
 }
 
 /*
- * Overlay Recieve Message 3
+ * Overlay Receive Message 3
  */
 register OVLYRXMSG3 {
 	address			0x093
@@ -1249,7 +1249,7 @@
 
 /*
  * LQ Packet In
- * The last LQ Packet recieved
+ * The last LQ Packet received
  */
 register LQIN {
 	address			0x020
@@ -2573,7 +2573,7 @@
 }
 
 /*
- * Shaddow Host Address.
+ * Shadow Host Address.
  */
 register SHADDR {
 	address			0x060
@@ -3983,7 +3983,7 @@
 
 	/*
 	 * The maximum amount of time to wait, when interrupt coalescing
-	 * is enabled, before issueing a CMDCMPLT interrupt for a completed
+	 * is enabled, before issuing a CMDCMPLT interrupt for a completed
 	 * command.
 	 */
 	INT_COALESCING_TIMER {
diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq
index 2fb78e3..3a36d936 100644
--- a/drivers/scsi/aic7xxx/aic79xx.seq
+++ b/drivers/scsi/aic7xxx/aic79xx.seq
@@ -567,7 +567,7 @@
 	shr	SELOID, 4, SCB_SCSIID;
 	/*
 	 * If we want to send a message to the device, ensure
-	 * we are selecting with atn irregardless of our packetized
+	 * we are selecting with atn regardless of our packetized
 	 * agreement.  Since SPI4 only allows target reset or PPR
 	 * messages if this is a packetized connection, the change
 	 * to our negotiation table entry for this selection will
@@ -960,7 +960,7 @@
  * This is done to allow the host to send messages outside of an identify
  * sequence while protecting the seqencer from testing the MK_MESSAGE bit
  * on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
  * an SCB that doesn't have anything to do with the current target).
  *
  * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
@@ -1507,7 +1507,7 @@
 		 * If the other FIFO needs loading, then it
 		 * must not have claimed the S/G cache yet
 		 * (SG_CACHE_AVAIL would have been cleared in
-		 * the orginal FIFO mode and we test this above).
+		 * the original FIFO mode and we test this above).
 		 * Return to the idle loop so we can process the
 		 * FIFO not currently on the bus first.
 		 */
@@ -1521,7 +1521,7 @@
 idle_sgfetch_start:
 	/*
 	 * We fetch a "cacheline aligned" and sized amount of data
-	 * so we don't end up referencing a non-existant page.
+	 * so we don't end up referencing a non-existent page.
 	 * Cacheline aligned is in quotes because the kernel will
 	 * set the prefetch amount to a reasonable level if the
 	 * cacheline size is unknown.
@@ -1551,7 +1551,7 @@
 	test	DFSTATUS, PRELOAD_AVAIL jz return;
 	/*
 	 * On the A, preloading a segment before HDMAENACK
-	 * comes true can clobber the shaddow address of the
+	 * comes true can clobber the shadow address of the
 	 * first segment in the S/G FIFO.  Wait until it is
 	 * safe to proceed.
 	 */
@@ -2004,10 +2004,10 @@
 	 * Defer handling of this NONPACKREQ until we
 	 * can be sure it pertains to this FIFO.  SAVEPTRS
 	 * will not be asserted if the NONPACKREQ is for us,
-	 * so we must simulate it if shaddow is valid.  If
-	 * shaddow is not valid, keep running this FIFO until we
+	 * so we must simulate it if shadow is valid.  If
+	 * shadow is not valid, keep running this FIFO until we
 	 * have satisfied the transfer by loading segments and
-	 * waiting for either shaddow valid or last_seg_done.
+	 * waiting for either shadow valid or last_seg_done.
 	 */
 	test	MDFFSTAT, SHVALID jnz pkt_saveptrs;
 pkt_service_fifo:
@@ -2171,7 +2171,7 @@
 	/*
 	 * The unexpected nonpkt phase handler assumes that any
 	 * data channel use will have a FIFO reference count.  It
-	 * turns out that the status handler doesn't need a refernce
+	 * turns out that the status handler doesn't need a references
 	 * count since the status received flag, and thus completion
 	 * processing, cannot be set until the handler is finished.
 	 * We increment the count here to make the nonpkt handler
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 3233bf5..5f8617d 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -562,7 +562,7 @@
 }
 #endif
 
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
 /*
  * Return pointers to the transfer negotiation information
  * for the specified our_id/remote_id pair.
@@ -599,7 +599,7 @@
 ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
 {
 	/*
-	 * Write low byte first to accomodate registers
+	 * Write low byte first to accommodate registers
 	 * such as PRGMCNT where the order maters.
 	 */
 	ahd_outb(ahd, port, value & 0xFF);
@@ -2067,7 +2067,7 @@
 		 * that requires host assistance for completion.
 		 * While handling the message phase(s), we will be
 		 * notified by the sequencer after each byte is
-		 * transfered so we can track bus phase changes.
+		 * transferred so we can track bus phase changes.
 		 *
 		 * If this is the first time we've seen a HOST_MSG_LOOP
 		 * interrupt, initialize the state of the host message
@@ -2487,7 +2487,7 @@
 		/*
 		 * Although the driver does not care about the
 		 * 'Selection in Progress' status bit, the busy
-		 * LED does.  SELINGO is only cleared by a successfull
+		 * LED does.  SELINGO is only cleared by a successful
 		 * selection, so we must manually clear it to insure
 		 * the LED turns off just incase no future successful
 		 * selections occur (e.g. no devices on the bus).
@@ -3548,7 +3548,7 @@
 		ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP);
   		ahd_outb(ahd, SIMODE1, simode1);
 		/*
-		 * SCSIINT seems to glitch occassionally when
+		 * SCSIINT seems to glitch occasionally when
 		 * the interrupt masks are restored.  Clear SCSIINT
 		 * one more time so that only persistent errors
 		 * are seen as a real interrupt.
@@ -3838,7 +3838,7 @@
 
 /*
  * Update the bitmask of targets for which the controller should
- * negotiate with at the next convenient oportunity.  This currently
+ * negotiate with at the next convenient opportunity.  This currently
  * means the next time we send the initial identify messages for
  * a new transaction.
  */
@@ -4200,7 +4200,7 @@
 
 	/*
 	 * During packetized transfers, the target will
-	 * give us the oportunity to send command packets
+	 * give us the opportunity to send command packets
 	 * without us asserting attention.
 	 */
 	if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
@@ -5651,7 +5651,7 @@
 
 		/*
 		 * Requeue all tagged commands for this target
-		 * currently in our posession so they can be
+		 * currently in our possession so they can be
 		 * converted to untagged commands.
 		 */
 		ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
@@ -6245,7 +6245,7 @@
 /*
  * Reset the controller and record some information about it
  * that is only available just after a reset.  If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
  * and the caller requests that the chip be fully reinitialized
  * to a runable state.  Chip interrupts are *not* enabled after
  * a reinitialization.  The caller must enable interrupts via
@@ -6495,7 +6495,7 @@
 	}
 
 	/*
-	 * Note that we were successfull
+	 * Note that we were successful
 	 */
 	return (0); 
 
@@ -7079,7 +7079,7 @@
 		return (ENOMEM);
 
 	/*
-	 * Verify that the compiler hasn't over-agressively
+	 * Verify that the compiler hasn't over-aggressively
 	 * padded important structures.
 	 */
 	if (sizeof(struct hardware_scb) != 64)
@@ -10087,7 +10087,7 @@
 		return (error);
 
 	/*
-	 * Write the data.  If we don't get throught the loop at
+	 * Write the data.  If we don't get through the loop at
 	 * least once, the arguments were invalid.
 	 */
 	retval = EINVAL;
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 25d0666..7d48700 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -1441,7 +1441,7 @@
 		usertags = ahd_linux_user_tagdepth(ahd, devinfo);
 		if (!was_queuing) {
 			/*
-			 * Start out agressively and allow our
+			 * Start out aggressively and allow our
 			 * dynamic queue depth algorithm to take
 			 * care of the rest.
 			 */
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
index 17444bc..f695774 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -440,7 +440,7 @@
  *	o A residual has occurred if SG_FULL_RESID is set in sgptr,
  *	  or residual_sgptr does not have SG_LIST_NULL set.
  *
- *	o We are transfering the last segment if residual_datacnt has
+ *	o We are transferring the last segment if residual_datacnt has
  *	  the SG_LAST_SEG flag set.
  *
  * Host:
@@ -494,7 +494,7 @@
  */
 
 /*
- * Definition of a scatter/gather element as transfered to the controller.
+ * Definition of a scatter/gather element as transferred to the controller.
  * The aic7xxx chips only support a 24bit length.  We use the top byte of
  * the length to store additional address bits and a flag to indicate
  * that a given segment terminates the transfer.  This gives us an
diff --git a/drivers/scsi/aic7xxx/aic7xxx.reg b/drivers/scsi/aic7xxx/aic7xxx.reg
index 9a96e55..ba0b411 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.reg
+++ b/drivers/scsi/aic7xxx/aic7xxx.reg
@@ -351,7 +351,7 @@
 	address			0x00d
 	access_mode RO
 	field	OVERRUN		0x80
-	field	SHVALID		0x40	/* Shaddow Layer non-zero */
+	field	SHVALID		0x40	/* Shadow Layer non-zero */
 	field	EXP_ACTIVE	0x10	/* SCSI Expander Active */
 	field	CRCVALERR	0x08	/* CRC doesn't match (U3 only) */
 	field	CRCENDERR	0x04	/* No terminal CRC packet (U3 only) */
diff --git a/drivers/scsi/aic7xxx/aic7xxx.seq b/drivers/scsi/aic7xxx/aic7xxx.seq
index 5a4cfc95..e60041e 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx/aic7xxx.seq
@@ -57,10 +57,10 @@
  * a later time.  This problem cannot be resolved by holding a single entry
  * in scratch ram since a reconnecting target can request sense and this will
  * create yet another SCB waiting for selection.  The solution used here is to 
- * use byte 27 of the SCB as a psuedo-next pointer and to thread a list
+ * use byte 27 of the SCB as a pseudo-next pointer and to thread a list
  * of SCBs that are awaiting selection.  Since 0-0xfe are valid SCB indexes, 
  * SCB_LIST_NULL is 0xff which is out of range.  An entry is also added to
- * this list everytime a request sense occurs or after completing a non-tagged
+ * this list every time a request sense occurs or after completing a non-tagged
  * command for which a second SCB has been queued.  The sequencer will
  * automatically consume the entries.
  */
@@ -752,7 +752,7 @@
 
 	/*
 	 * We fetch a "cacheline aligned" and sized amount of data
-	 * so we don't end up referencing a non-existant page.
+	 * so we don't end up referencing a non-existent page.
 	 * Cacheline aligned is in quotes because the kernel will
 	 * set the prefetch amount to a reasonable level if the
 	 * cacheline size is unknown.
@@ -1485,7 +1485,7 @@
  * This is done to allow the host to send messages outside of an identify
  * sequence while protecting the seqencer from testing the MK_MESSAGE bit
  * on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
  * an SCB that doesn't have anything to do with the current target).
  *
  * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
@@ -1999,7 +1999,7 @@
  * from out to in, wait an additional data release delay before continuing.
  */
 change_phase:
-	/* Wait for preceeding I/O session to complete. */
+	/* Wait for preceding I/O session to complete. */
 	test	SCSISIGI, ACKI jnz .;
 
 	/* Change the phase */
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index e021b48..dc28b0a 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -427,7 +427,7 @@
 }
 #endif
 
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
 /*
  * Determine whether the sequencer reported a residual
  * for this SCB/transaction.
@@ -1243,7 +1243,7 @@
 		 * that requires host assistance for completion.
 		 * While handling the message phase(s), we will be
 		 * notified by the sequencer after each byte is
-		 * transfered so we can track bus phase changes.
+		 * transferred so we can track bus phase changes.
 		 *
 		 * If this is the first time we've seen a HOST_MSG_LOOP
 		 * interrupt, initialize the state of the host message
@@ -1487,7 +1487,7 @@
 		       scbptr, ahc_inb(ahc, ARG_1),
 		       ahc->scb_data->hscbs[scbptr].tag);
 		ahc_dump_card_state(ahc);
-		panic("for saftey");
+		panic("for safety");
 		break;
 	}
 	case OUT_OF_RANGE:
@@ -1733,7 +1733,7 @@
 		/*
 		 * Although the driver does not care about the
 		 * 'Selection in Progress' status bit, the busy
-		 * LED does.  SELINGO is only cleared by a successfull
+		 * LED does.  SELINGO is only cleared by a successful
 		 * selection, so we must manually clear it to insure
 		 * the LED turns off just incase no future successful
 		 * selections occur (e.g. no devices on the bus).
@@ -1943,7 +1943,7 @@
 			if (lastphase != P_BUSFREE) {
 				/*
 				 * Renegotiate with this device at the
-				 * next oportunity just in case this busfree
+				 * next opportunity just in case this busfree
 				 * is due to a negotiation mismatch with the
 				 * device.
 				 */
@@ -2442,7 +2442,7 @@
 
 /*
  * Update the bitmask of targets for which the controller should
- * negotiate with at the next convenient oportunity.  This currently
+ * negotiate with at the next convenient opportunity.  This currently
  * means the next time we send the initial identify messages for
  * a new transaction.
  */
@@ -4131,7 +4131,7 @@
 
 		/*
 		 * Requeue all tagged commands for this target
-		 * currently in our posession so they can be
+		 * currently in our possession so they can be
 		 * converted to untagged commands.
 		 */
 		ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
@@ -4581,7 +4581,7 @@
 /*
  * Reset the controller and record some information about it
  * that is only available just after a reset.  If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
  * and the caller requests that the chip be fully reinitialized
  * to a runable state.  Chip interrupts are *not* enabled after
  * a reinitialization.  The caller must enable interrupts via
@@ -4899,7 +4899,7 @@
 	ahc->next_queued_scb = ahc_get_scb(ahc);
 
 	/*
-	 * Note that we were successfull
+	 * Note that we were successful
 	 */
 	return (0); 
 
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 4a359bb..c6251bb 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -294,7 +294,7 @@
  * dubious at best.  To my knowledge, this option has never actually
  * solved a PCI parity problem, but on certain machines with broken PCI
  * chipset configurations where stray PCI transactions with bad parity are
- * the norm rather than the exception, the error messages can be overwelming.
+ * the norm rather than the exception, the error messages can be overwhelming.
  * It's included in the driver for completeness.
  *   0	   = Shut off PCI parity check
  *   non-0 = reverse polarity pci parity checking
@@ -1318,7 +1318,7 @@
 		usertags = ahc_linux_user_tagdepth(ahc, devinfo);
 		if (!was_queuing) {
 			/*
-			 * Start out agressively and allow our
+			 * Start out aggressively and allow our
 			 * dynamic queue depth algorithm to take
 			 * care of the rest.
 			 */
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
index 2b11a42..6917b4f 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -789,7 +789,7 @@
 	ahc->bus_intr = ahc_pci_intr;
 	ahc->bus_chip_init = ahc_pci_chip_init;
 
-	/* Remeber how the card was setup in case there is no SEEPROM */
+	/* Remember how the card was setup in case there is no SEEPROM */
 	if ((ahc_inb(ahc, HCNTRL) & POWRDN) == 0) {
 		ahc_pause(ahc);
 		if ((ahc->features & AHC_ULTRA2) != 0)
@@ -860,7 +860,7 @@
 	}
 
 	/*
-	 * We cannot perform ULTRA speeds without the presense
+	 * We cannot perform ULTRA speeds without the presence
 	 * of the external precision resistor.
 	 */
 	if ((ahc->features & AHC_ULTRA) != 0) {
@@ -969,7 +969,7 @@
 }
 
 /*
- * Test for the presense of external sram in an
+ * Test for the presence of external sram in an
  * "unshared" configuration.
  */
 static int
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
index e406443..f1586a4 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
@@ -803,7 +803,7 @@
 |	macro_arglist ',' T_ARG
 	{
 		if ($1 == 0) {
-			stop("Comma without preceeding argument in arg list",
+			stop("Comma without preceding argument in arg list",
 			     EX_DATAERR);
 			/* NOTREACHED */
 		}
@@ -1319,8 +1319,8 @@
 ;
 
 	/*
-	 * This grammer differs from the one in the aic7xxx
-	 * reference manual since the grammer listed there is
+	 * This grammar differs from the one in the aic7xxx
+	 * reference manual since the grammar listed there is
 	 * ambiguous and causes a shift/reduce conflict.
 	 * It also seems more logical as the "immediate"
 	 * argument is listed as the second arg like the
@@ -1799,7 +1799,7 @@
 	instr = seq_alloc();
 	f3_instr = &instr->format.format3;
 	if (address->symbol == NULL) {
-		/* 'dot' referrence.  Use the current instruction pointer */
+		/* 'dot' reference.  Use the current instruction pointer */
 		addr = instruction_ptr + address->offset;
 	} else if (address->symbol->type == UNINITIALIZED) {
 		/* forward reference */
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
index ff46aa6..708326d 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
@@ -115,7 +115,7 @@
 |	macro_arglist ',' T_ARG
 	{
 		if ($1 == 0) {
-			stop("Comma without preceeding argument in arg list",
+			stop("Comma without preceding argument in arg list",
 			     EX_DATAERR);
 			/* NOTREACHED */
 		}
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index 4ff60a0..5b212f0 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -905,7 +905,7 @@
  * problems with architectures I can't test on (because I don't have one,
  * such as the Alpha based systems) which happen to give faults for
  * non-aligned memory accesses, care was taken to align this structure
- * in a way that gauranteed all accesses larger than 8 bits were aligned
+ * in a way that guaranteed all accesses larger than 8 bits were aligned
  * on the appropriate boundary.  It's also organized to try and be more
  * cache line efficient.  Be careful when changing this lest you might hurt
  * overall performance and bring down the wrath of the masses.
@@ -1180,7 +1180,7 @@
  * the card's registers in a hex dump format tailored to each model of
  * controller.
  * 
- * NOTE: THE CONTROLLER IS LEFT IN AN UNUSEABLE STATE BY THIS OPTION.
+ * NOTE: THE CONTROLLER IS LEFT IN AN UNUSABLE STATE BY THIS OPTION.
  *       YOU CANNOT BOOT UP WITH THIS OPTION, IT IS FOR DEBUGGING PURPOSES
  *       ONLY
  */
@@ -3467,7 +3467,7 @@
   /* Turn off the bus' current operations, after all, we shouldn't have any
    * valid commands left to cause a RSELI and SELO once we've tossed the
    * bus away with this reset, so we might as well shut down the sequencer
-   * until the bus is restarted as oppossed to saving the current settings
+   * until the bus is restarted as opposed to saving the current settings
    * and restoring them (which makes no sense to me). */
 
   /* Turn on the bus reset. */
@@ -4070,7 +4070,7 @@
             aic_dev->max_q_depth = aic_dev->temp_q_depth = 1;
             /*
              * We set this command up as a bus device reset.  However, we have
-             * to clear the tag type as it's causing us problems.  We shouldnt
+             * to clear the tag type as it's causing us problems.  We shouldn't
              * have to worry about any other commands being active, since if
              * the device is refusing tagged commands, this should be the
              * first tagged command sent to the device, however, we do have
@@ -9748,7 +9748,7 @@
     }
 
     /*
-     * We are commited now, everything has been checked and this card
+     * We are committed now, everything has been checked and this card
      * has been found, now we just set it up
      */
 
@@ -9906,7 +9906,7 @@
    *  2: All PCI controllers with BIOS_ENABLED next, according to BIOS
    *     address, going from lowest to highest.
    *  3: Remaining VLB/EISA controllers going in slot order.
-   *  4: Remaining PCI controllers, going in PCI device order (reversable)
+   *  4: Remaining PCI controllers, going in PCI device order (reversible)
    */
 
   {
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index 1565be9..823ff28 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -51,7 +51,7 @@
  * use byte 27 of the SCB as a pseudo-next pointer and to thread a list
  * of SCBs that are awaiting selection.  Since 0-0xfe are valid SCB indexes, 
  * SCB_LIST_NULL is 0xff which is out of range.  An entry is also added to
- * this list everytime a request sense occurs or after completing a non-tagged
+ * this list every time a request sense occurs or after completing a non-tagged
  * command for which a second SCB has been queued.  The sequencer will
  * automatically consume the entries.
  */
@@ -696,7 +696,7 @@
  * This is done to allow the hsot to send messages outside of an identify
  * sequence while protecting the seqencer from testing the MK_MESSAGE bit
  * on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
  * an SCB that doesn't have anything to do with the current target).
  * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
  * bus device reset).
@@ -716,8 +716,8 @@
 	} else {
 		and	SINDEX,0x7,SCB_TCL;	/* lun */
 	}
-	and	A,DISCENB,SCB_CONTROL;	/* mask off disconnect privledge */
-	or	SINDEX,A;		/* or in disconnect privledge */
+	and	A,DISCENB,SCB_CONTROL;	/* mask off disconnect privilege */
+	or	SINDEX,A;		/* or in disconnect privilege */
 	or	SINDEX,MSG_IDENTIFYFLAG;
 p_mesgout_mk_message:
 	test	SCB_CONTROL,MK_MESSAGE  jz p_mesgout_tag;
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index 40273a7..dd6cc80 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -2134,7 +2134,7 @@
 * The host accesses this scratch in a different manner from the
 * link sequencer. The sequencer has to use LSEQ registers
 * LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat
-* mapping of the scratch memory is avaliable for software
+* mapping of the scratch memory is available for software
 * convenience and to prevent corruption while the sequencer is
 * running. This memory is mapped onto addresses 800h - 9FFh.
 *
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index ec16672..c454e44 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -100,7 +100,7 @@
  */
 #define TIMEOUT_TIME 10
 /*
- * Define this if you want to have verbose explaination of SCSI
+ * Define this if you want to have verbose explanation of SCSI
  * status/messages.
  */
 #undef CONFIG_ACORNSCSI_CONSTANTS
@@ -1561,7 +1561,7 @@
 	/*
 	 * If we were negociating sync transfer, we don't yet know if
 	 * this REJECT is for the sync transfer or for the tagged queue/wide
-	 * transfer.  Re-initiate sync transfer negociation now, and if
+	 * transfer.  Re-initiate sync transfer negotiation now, and if
 	 * we got a REJECT in response to SDTR, then it'll be set to DONE.
 	 */
 	if (host->device[host->SCpnt->device->id].sync_state == SYNC_SENT_REQUEST)
diff --git a/drivers/scsi/arm/acornscsi.h b/drivers/scsi/arm/acornscsi.h
index 8d2172a..01bc715 100644
--- a/drivers/scsi/arm/acornscsi.h
+++ b/drivers/scsi/arm/acornscsi.h
@@ -223,8 +223,8 @@
  * Synchronous transfer state
  */
 typedef enum {					/* Synchronous transfer state		*/
-    SYNC_ASYNCHRONOUS,				/* don't negociate synchronous transfers*/
-    SYNC_NEGOCIATE,				/* start negociation			*/
+    SYNC_ASYNCHRONOUS,				/* don't negotiate synchronous transfers*/
+    SYNC_NEGOCIATE,				/* start negotiation			*/
     SYNC_SENT_REQUEST,				/* sent SDTR message			*/
     SYNC_COMPLETED,				/* received SDTR reply			*/
 } syncxfer_t;
@@ -322,7 +322,7 @@
     /* per-device info */
     struct {
 	unsigned char	sync_xfer;		/* synchronous transfer (SBIC value)	*/
-	syncxfer_t	sync_state;		/* sync xfer negociation state		*/
+	syncxfer_t	sync_state;		/* sync xfer negotiation state		*/
 	unsigned char	disconnect_ok:1;	/* device can disconnect		*/
     } device[8];
     unsigned long	busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy	*/
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index 2836fe2..a750aa7 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -228,7 +228,7 @@
  * Params  : buffer - a buffer to write information to
  *	     start  - a pointer into this buffer set by this routine to the start
  *		      of the required information.
- *	     offset - offset into information that we have read upto.
+ *	     offset - offset into information that we have read up to.
  *	     length - length of buffer
  *	     host_no - host number to return information for
  *	     inout  - 0 for reading, 1 for writing.
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index c9902b5..547987b 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -344,7 +344,7 @@
  * Params   : buffer - a buffer to write information to
  *	      start  - a pointer into this buffer set by this routine to the start
  *		       of the required information.
- *	      offset - offset into information that we have read upto.
+ *	      offset - offset into information that we have read up to.
  *	      length - length of buffer
  *	      host_no - host number to return information for
  *	      inout  - 0 for reading, 1 for writing.
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index d843513..edfd12b 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -429,7 +429,7 @@
  * Params   : buffer - a buffer to write information to
  *	      start  - a pointer into this buffer set by this routine to the start
  *		       of the required information.
- *	      offset - offset into information that we have read upto.
+ *	      offset - offset into information that we have read up to.
  *	      length - length of buffer
  *	      host_no - host number to return information for
  *	      inout  - 0 for reading, 1 for writing.
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 2b2ce21..e85c40b 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2119,7 +2119,7 @@
 	 * executed, unless a target connects to us.
 	 */
 	if (info->reqSCpnt)
-		printk(KERN_WARNING "scsi%d.%c: loosing request command\n",
+		printk(KERN_WARNING "scsi%d.%c: losing request command\n",
 			info->host->host_no, '0' + SCpnt->device->id);
 	info->reqSCpnt = SCpnt;
 }
@@ -2294,7 +2294,7 @@
 		 * If we don't have an IRQ, then we must poll the card for
 		 * it's interrupt, and use that to call this driver's
 		 * interrupt routine.  That way, we keep the command
-		 * progressing.  Maybe we can add some inteligence here
+		 * progressing.  Maybe we can add some intelligence here
 		 * and go to sleep if we know that the device is going
 		 * to be some time (eg, disconnected).
 		 */
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index f30f8d6..84b7127 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -203,11 +203,11 @@
 } fasdmatype_t;
 
 typedef enum {
-	neg_wait,					/* Negociate with device		*/
-	neg_inprogress,					/* Negociation sent			*/
-	neg_complete,					/* Negociation complete			*/
-	neg_targcomplete,				/* Target completed negociation		*/
-	neg_invalid					/* Negociation not supported		*/
+	neg_wait,					/* Negotiate with device		*/
+	neg_inprogress,					/* Negotiation sent			*/
+	neg_complete,					/* Negotiation complete			*/
+	neg_targcomplete,				/* Target completed negotiation		*/
+	neg_invalid					/* Negotiation not supported		*/
 } neg_t;
 
 #define MAGIC	0x441296bdUL
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index e2297b4..9274c06 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -232,7 +232,7 @@
  * Params   : buffer  - a buffer to write information to
  *	      start   - a pointer into this buffer set by this routine to the start
  *		        of the required information.
- *	      offset  - offset into information that we have read upto.
+ *	      offset  - offset into information that we have read up to.
  *	      length  - length of buffer
  *	      inout   - 0 for reading, 1 for writing.
  * Returns  : length of data written to buffer.
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 88b2928..ea439f9 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -464,7 +464,7 @@
  *
  * Parameters: Scsi_Cmnd *cmd
  *    The command to work on. The first scatter buffer's data are
- *    assumed to be already transfered into ptr/this_residual.
+ *    assumed to be already transferred into ptr/this_residual.
  */
 
 static void merge_contiguous_buffers(Scsi_Cmnd *cmd)
@@ -1720,7 +1720,7 @@
  *	bytes to transfer, **data - pointer to data pointer.
  *
  * Returns : -1 when different phase is entered without transferring
- *	maximum number of bytes, 0 if all bytes are transfered or exit
+ *	maximum number of bytes, 0 if all bytes are transferred or exit
  *	is in same phase.
  *
  *	Also, *phase, *count, *data are modified in place.
@@ -1911,7 +1911,7 @@
  *	bytes to transfer, **data - pointer to data pointer.
  *
  * Returns : -1 when different phase is entered without transferring
- *	maximum number of bytes, 0 if all bytes or transfered or exit
+ *	maximum number of bytes, 0 if all bytes or transferred or exit
  *	is in same phase.
  *
  *	Also, *phase, *count, *data are modified in place.
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 76029d5..7e6eca4 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -1228,7 +1228,7 @@
 	printk(" \n%x %x %x %s\n ",assignid_map,mbuf[0],mbuf[1],&mbuf[2]); */
 	i = 15;
 	j = mbuf[0];
-	if ((j & 0x20) != 0) {	/* bit5=1:ID upto 7      */
+	if ((j & 0x20) != 0) {	/* bit5=1:ID up to 7      */
 		i = 7;
 	}
 	if ((j & 0x06) == 0) {	/* IDvalid?             */
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index 5218de4..fbd1dc2 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -877,7 +877,7 @@
 						 */
 #define CXN_KILLED_PDU_SIZE_EXCEEDS_DSL 3	/* Connection got invalidated
 						 * internally
-						 * due to a recieved PDU
+						 * due to a received PDU
 						 * size > DSL
 						 */
 #define CXN_KILLED_BURST_LEN_MISMATCH   4	/* Connection got invalidated
@@ -886,7 +886,7 @@
 						 * FBL/MBL.
 						 */
 #define CXN_KILLED_AHS_RCVD		5	/* Connection got invalidated
-						 * internally due to a recieved
+						 * internally due to a received
 						 * PDU Hdr that has
 						 * AHS */
 #define CXN_KILLED_HDR_DIGEST_ERR	6	/* Connection got invalidated
@@ -899,12 +899,12 @@
 						 * pdu hdr
 						 */
 #define CXN_KILLED_STALE_ITT_TTT_RCVD	8	/* Connection got invalidated
-						 * internally due to a recieved
+						 * internally due to a received
 						 * ITT/TTT that does not belong
 						 * to this Connection
 						 */
 #define CXN_KILLED_INVALID_ITT_TTT_RCVD 9	/* Connection got invalidated
-						 * internally due to recieved
+						 * internally due to received
 						 * ITT/TTT value > Max
 						 * Supported ITTs/TTTs
 						 */
@@ -936,21 +936,21 @@
 						 * index.
 						 */
 #define CXN_KILLED_OVER_RUN_RESIDUAL	16	/* Command got invalidated
-						 * internally due to recived
+						 * internally due to received
 						 * command has residual
 						 * over run bytes.
 						 */
 #define CXN_KILLED_UNDER_RUN_RESIDUAL	17	/* Command got invalidated
-						 * internally due to recived
+						 * internally due to received
 						 * command has residual under
 						 * run bytes.
 						 */
 #define CMD_KILLED_INVALID_STATSN_RCVD	18	/* Command got invalidated
-						 * internally due to a recieved
+						 * internally due to a received
 						 * PDU has an invalid StatusSN
 						 */
 #define CMD_KILLED_INVALID_R2T_RCVD	19	/* Command got invalidated
-						 * internally due to a recieved
+						 * internally due to a received
 						 * an R2T with some invalid
 						 * fields in it
 						 */
@@ -973,7 +973,7 @@
 						 */
 #define CMD_CXN_KILLED_INVALID_DATASN_RCVD 24	/* Command got invalidated
 						 * internally due to a
-						 * recieved PDU has an invalid
+						 * received PDU has an invalid
 						 * DataSN
 						 */
 #define CXN_INVALIDATE_NOTIFY		25	/* Connection invalidation
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 1cd5c8b..91838c5 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -355,7 +355,7 @@
 			/*
 			 * ERR_PSS bit needs to be cleared as well in case
 			 * interrups are shared so driver's interrupt handler is
-			 * still called eventhough it is already masked out.
+			 * still called even though it is already masked out.
 			 */
 			curr_value = readl(
 					bfa->ioc.ioc_regs.pss_err_status_reg);
diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h
index 648c841..207f598 100644
--- a/drivers/scsi/bfa/bfa_defs_svc.h
+++ b/drivers/scsi/bfa/bfa_defs_svc.h
@@ -145,7 +145,7 @@
 	u32	ioh_data_oor_event;	/*  Data out of range */
 	u32	ioh_ro_ooo_event;	/*  Relative offset out of range */
 	u32	ioh_cpu_owned_event;	/*  IOH hit -iost owned by f/w */
-	u32	ioh_unexp_frame_event;	/*  unexpected frame recieved
+	u32	ioh_unexp_frame_event;	/*  unexpected frame received
 						 *   count */
 	u32	ioh_err_int;		/*  IOH error int during data-phase
 						 *   for scsi write
@@ -566,8 +566,8 @@
 	u32	input_reqs;		/*  Data in-bound requests	*/
 	u32	output_reqs;		/*  Data out-bound requests	*/
 	u32	io_comps;		/*  Total IO Completions	*/
-	u32	wr_throughput;		/*  Write data transfered in bytes */
-	u32	rd_throughput;		/*  Read data transfered in bytes  */
+	u32	wr_throughput;		/*  Write data transferred in bytes */
+	u32	rd_throughput;		/*  Read data transferred in bytes  */
 
 	u32	iocomp_ok;		/*  Slowpath IO completions	*/
 	u32	iocomp_underrun;	/*  IO underrun		*/
diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h
index 8e764fa..bf0067e 100644
--- a/drivers/scsi/bfa/bfa_fc.h
+++ b/drivers/scsi/bfa/bfa_fc.h
@@ -315,7 +315,7 @@
 			query_dbc:1,
 			hg_supp:1;
 #endif
-	__be16		rxsz;		/* recieve data_field size */
+	__be16		rxsz;		/* receive data_field size */
 	__be16		conseq;
 	__be16		ro_bitmap;
 	__be32		e_d_tov;
diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c
index f674f93..9b43ca4 100644
--- a/drivers/scsi/bfa/bfa_fcs.c
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -1033,7 +1033,7 @@
 
 
 /*
- * Lookup for a vport withing a fabric given its pwwn
+ * Lookup for a vport within a fabric given its pwwn
  */
 struct bfa_fcs_vport_s *
 bfa_fcs_fabric_vport_lookup(struct bfa_fcs_fabric_s *fabric, wwn_t pwwn)
diff --git a/drivers/scsi/bfa/bfa_fcs.h b/drivers/scsi/bfa/bfa_fcs.h
index 0fd6316..61cdce4 100644
--- a/drivers/scsi/bfa/bfa_fcs.h
+++ b/drivers/scsi/bfa/bfa_fcs.h
@@ -705,7 +705,7 @@
 	RPSM_EVENT_ADDRESS_CHANGE = 15, /*  Rport's PID has changed     */
 	RPSM_EVENT_ADDRESS_DISC = 16,   /*  Need to Discover rport's PID */
 	RPSM_EVENT_PRLO_RCVD   = 17,    /*  PRLO from remote device     */
-	RPSM_EVENT_PLOGI_RETRY = 18,    /*  Retry PLOGI continously */
+	RPSM_EVENT_PLOGI_RETRY = 18,    /*  Retry PLOGI continuously */
 };
 
 /*
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index 43fa986b..1d6be8c 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -1149,7 +1149,7 @@
 		} else {
 			/*
 			 * For a base port, we should first register the HBA
-			 * atribute. The HBA attribute also contains the base
+			 * attribute. The HBA attribute also contains the base
 			 *  port registration.
 			 */
 			bfa_sm_set_state(fdmi,
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index 1d34921..16d9a5f 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -1035,7 +1035,7 @@
  * @param[in]	rport	BFA rport pointer. Could be left NULL for WKA rports
  * @param[in]	vf_id	virtual Fabric ID
  * @param[in]	lp_tag	lport tag
- * @param[in]	cts	use Continous sequence
+ * @param[in]	cts	use Continuous sequence
  * @param[in]	cos	fc Class of Service
  * @param[in]	reqlen	request length, does not include FCHS length
  * @param[in]	fchs	fc Header Pointer. The header content will be copied
@@ -5022,7 +5022,7 @@
 }
 
 /*
- * Register handler for all unsolicted recieve frames.
+ * Register handler for all unsolicted receive frames.
  *
  * @param[in]	bfa		BFA instance
  * @param[in]	ufrecv	receive handler function
diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h
index 331ad99..5902a45 100644
--- a/drivers/scsi/bfa/bfa_svc.h
+++ b/drivers/scsi/bfa/bfa_svc.h
@@ -127,7 +127,7 @@
 					 * rport nexus is established
 					 */
 	struct fchs_s	fchs;	/*  request FC header structure */
-	u8		cts;	/*  continous sequence */
+	u8		cts;	/*  continuous sequence */
 	u8		class;	/*  FC class for the request/response */
 	u16	max_frmsz;	/*  max send frame size */
 	u16	vf_id;	/*  vsan tag if applicable */
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 44524cf..0fd510a 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -1278,7 +1278,7 @@
 			 * interrupts into one vector, so even if we
 			 * can try to request less vectors, we don't
 			 * know how to associate interrupt events to
-			 *  vectors. Linux doesn't dupicate vectors
+			 *  vectors. Linux doesn't duplicate vectors
 			 * in the MSIX table for this case.
 			 */
 
diff --git a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
index 69d031d..97a61b4 100644
--- a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
+++ b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
@@ -898,7 +898,7 @@
 
 
 /*
- * FCoE conection data base
+ * FCoE connection data base
  */
 struct fcoe_conn_db {
 #if defined(__BIG_ENDIAN)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c
index 7a11a25..52c3584 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_els.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_els.c
@@ -397,7 +397,7 @@
 			     &els_req->req_flags)) {
 		BNX2FC_ELS_DBG("Timer context finished processing this "
 			   "els - 0x%x\n", els_req->xid);
-		/* This IO doesnt receive cleanup completion */
+		/* This IO doesn't receive cleanup completion */
 		kref_put(&els_req->refcount, bnx2fc_cmd_release);
 		return;
 	}
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index d3fc302..1decefb 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1273,7 +1273,7 @@
 						 bnx2fc_cmd_release);
 							/* timer hold */
 				rc = bnx2fc_initiate_abts(cmd);
-				/* abts shouldnt fail in this context */
+				/* abts shouldn't fail in this context */
 				WARN_ON(rc != SUCCESS);
 			} else
 				printk(KERN_ERR PFX "lun_rst: abts already in"
@@ -1308,7 +1308,7 @@
 				kref_put(&io_req->refcount,
 					 bnx2fc_cmd_release); /* timer hold */
 			rc = bnx2fc_initiate_abts(cmd);
-			/* abts shouldnt fail in this context */
+			/* abts shouldn't fail in this context */
 			WARN_ON(rc != SUCCESS);
 
 		} else
diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
index 7cc05e4..a2e3830 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
@@ -395,7 +395,7 @@
 		rp = rport->dd_data;
 		if (rport->port_id == FC_FID_DIR_SERV) {
 			/*
-			 * bnx2fc_rport structure doesnt exist for
+			 * bnx2fc_rport structure doesn't exist for
 			 * directory server.
 			 * We should not come here, as lport will
 			 * take care of fabric login
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 1da34c0..f0b8951 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -173,7 +173,7 @@
 
 /**
  * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer
- * @conn:		iscsi connection on which RQ event occured
+ * @conn:		iscsi connection on which RQ event occurred
  * @ptr:		driver buffer to which RQ buffer contents is to
  *			be copied
  * @len:		length of valid data inside RQ buf
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index 0a20fd5..9267844 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -262,9 +262,9 @@
 enum cxgbi_skcb_flags {
 	SKCBF_TX_NEED_HDR,	/* packet needs a header */
 	SKCBF_RX_COALESCED,	/* received whole pdu */
-	SKCBF_RX_HDR,		/* recieved pdu header */
-	SKCBF_RX_DATA,		/* recieved pdu payload */
-	SKCBF_RX_STATUS,	/* recieved ddp status */
+	SKCBF_RX_HDR,		/* received pdu header */
+	SKCBF_RX_DATA,		/* received pdu payload */
+	SKCBF_RX_STATUS,	/* received ddp status */
 	SKCBF_RX_DATA_DDPD,	/* pdu payload ddp'd */
 	SKCBF_RX_HCRC_ERR,	/* header digest error */
 	SKCBF_RX_DCRC_ERR,	/* data digest error */
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index b0f8523..b10b384 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -235,7 +235,7 @@
 
 	u8 sg_count;			/* No of HW sg entries for this request */
 	u8 sg_index;			/* Index of HW sg entry for this request */
-	size_t total_xfer_length;	/* Total number of bytes remaining to be transfered */
+	size_t total_xfer_length;	/* Total number of bytes remaining to be transferred */
 	size_t request_length;		/* Total number of bytes in this request */
 	/*
 	 * The sense buffer handling function, request_sense, uses
@@ -1774,7 +1774,7 @@
 		dc395x_statev(acb, srb, &scsi_status);
 
 		/* 
-		 * if there were any exception occured scsi_status
+		 * if there were any exception occurred scsi_status
 		 * will be modify to bus free phase new scsi_status
 		 * transfer out from ... previous dc395x_statev
 		 */
@@ -1954,11 +1954,11 @@
 static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 {
 	u8 idx;
-	u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
+	u32 xferred = srb->total_xfer_length - left; /* bytes transferred */
 	struct SGentry *psge = srb->segment_x + srb->sg_index;
 
 	dprintkdbg(DBG_0,
-		"sg_update_list: Transfered %i of %i bytes, %i remain\n",
+		"sg_update_list: Transferred %i of %i bytes, %i remain\n",
 		xferred, srb->total_xfer_length, left);
 	if (xferred == 0) {
 		/* nothing to update since we did not transfer any data */
@@ -1990,7 +1990,7 @@
 
 
 /*
- * We have transfered a single byte (PIO mode?) and need to update
+ * We have transferred a single byte (PIO mode?) and need to update
  * the count of bytes remaining (total_xfer_length) and update the sg
  * entry to either point to next byte in the current sg entry, or of
  * already at the end to point to the start of the next sg entry
@@ -2029,7 +2029,7 @@
 
 
 /*
- * Those no of bytes will be transfered w/ PIO through the SCSI FIFO
+ * Those no of bytes will be transferred w/ PIO through the SCSI FIFO
  * Seems to be needed for unknown reasons; could be a hardware bug :-(
  */
 #define DC395x_LASTPIO 4
@@ -2256,7 +2256,7 @@
 			DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
 			srb->total_xfer_length, d_left_counter);
 #if DC395x_LASTPIO
-		/* KG: Less than or equal to 4 bytes can not be transfered via DMA, it seems. */
+		/* KG: Less than or equal to 4 bytes can not be transferred via DMA, it seems. */
 		if (d_left_counter
 		    && srb->total_xfer_length <= DC395x_LASTPIO) {
 			size_t left_io = srb->total_xfer_length;
diff --git a/drivers/scsi/dc395x.h b/drivers/scsi/dc395x.h
index b38360e..fbf35e3 100644
--- a/drivers/scsi/dc395x.h
+++ b/drivers/scsi/dc395x.h
@@ -617,7 +617,7 @@
 #define NTC_DO_SEND_START		0x08	/* Send start command SPINUP		*/
 #define NTC_DO_DISCONNECT		0x04	/* Enable SCSI disconnect		*/
 #define NTC_DO_SYNC_NEGO		0x02	/* Sync negotiation			*/
-#define NTC_DO_PARITY_CHK		0x01	/* (it sould define at NAC)		*/
+#define NTC_DO_PARITY_CHK		0x01	/* (it should define at NAC)		*/
 						/* Parity check enable			*/
 
 /************************************************************************/
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 7cae0bc..42fe529 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -541,7 +541,7 @@
  *
  * Evaluate the Target Port Group State.
  * Returns SCSI_DH_DEV_OFFLINED if the path is
- * found to be unuseable.
+ * found to be unusable.
  */
 static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
 {
@@ -620,7 +620,7 @@
 		break;
 	case TPGS_STATE_OFFLINE:
 	case TPGS_STATE_UNAVAILABLE:
-		/* Path unuseable for unavailable/offline */
+		/* Path unusable for unavailable/offline */
 		err = SCSI_DH_DEV_OFFLINED;
 		break;
 	default:
diff --git a/drivers/scsi/dpt/sys_info.h b/drivers/scsi/dpt/sys_info.h
index a90c4cb..a4aa1c3 100644
--- a/drivers/scsi/dpt/sys_info.h
+++ b/drivers/scsi/dpt/sys_info.h
@@ -79,9 +79,9 @@
    typedef struct  {
 #endif
 
-   uSHORT       cylinders;      /* Upto 1024 */
-   uCHAR        heads;          /* Upto 255 */
-   uCHAR        sectors;        /* Upto 63 */
+   uSHORT       cylinders;      /* Up to 1024 */
+   uCHAR        heads;          /* Up to 255 */
+   uCHAR        sectors;        /* Up to 63 */
 
 #ifdef  __cplusplus
 
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index 53925ac..0eb4fe6 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -63,7 +63,7 @@
  *          ep:[y|n]      eisa_probe=[1|0]  CONFIG_EISA defined
  *          pp:[y|n]      pci_probe=[1|0]   CONFIG_PCI  defined
  *
- *          The default action is to perform probing if the corrisponding
+ *          The default action is to perform probing if the corresponding
  *          bus is configured and to skip probing otherwise.
  *
  *        + If pci_probe is in effect and a list of I/O  ports is specified
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index c93f007..9d38be2 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -656,7 +656,7 @@
 		 * If non-FIP, we may have gotten an SID by accepting an FLOGI
 		 * from a point-to-point connection.  Switch to using
 		 * the source mac based on the SID.  The destination
-		 * MAC in this case would have been set by receving the
+		 * MAC in this case would have been set by receiving the
 		 * FLOGI.
 		 */
 		if (fip->state == FIP_ST_NON_FIP) {
@@ -1876,7 +1876,7 @@
  * fcoe_ctlr_vn_rport_callback - Event handler for rport events.
  * @lport: The lport which is receiving the event
  * @rdata: remote port private data
- * @event: The event that occured
+ * @event: The event that occurred
  *
  * Locking Note:  The rport lock must not be held when calling this function.
  */
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 69b7aa5..643f6d5 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -174,7 +174,7 @@
  Future Domain sold DOS BIOS source for $250 and the UN*X driver source was
  $750, but these required a non-disclosure agreement, so even if I could
  have afforded them, they would *not* have been useful for writing this
- publically distributable driver.  Future Domain technical support has
+ publicly distributable driver.  Future Domain technical support has
  provided some information on the phone and have sent a few useful FAXs.
  They have been much more helpful since they started to recognize that the
  word "Linux" refers to an operating system :-).
diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c
index 2b48d79..3c53c34 100644
--- a/drivers/scsi/fnic/fnic_fcs.c
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -411,7 +411,7 @@
 			err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame);
 			if (err)
 				shost_printk(KERN_ERR, fnic->lport->host,
-					     "fnic_alloc_rq_frame cant alloc"
+					     "fnic_alloc_rq_frame can't alloc"
 					     " frame\n");
 		}
 		tot_rq_work_done += cur_work_done;
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 22d0240..538b31c 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -1123,7 +1123,7 @@
 					    fc_lun.scsi_lun, io_req)) {
 			/*
 			 * Revert the cmd state back to old state, if
-			 * it hasnt changed in between. This cmd will get
+			 * it hasn't changed in between. This cmd will get
 			 * aborted later by scsi_eh, or cleaned up during
 			 * lun reset
 			 */
@@ -1208,7 +1208,7 @@
 					    fc_lun.scsi_lun, io_req)) {
 			/*
 			 * Revert the cmd state back to old state, if
-			 * it hasnt changed in between. This cmd will get
+			 * it hasn't changed in between. This cmd will get
 			 * aborted later by scsi_eh, or cleaned up during
 			 * lun reset
 			 */
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 427a56d..81182ba 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -566,7 +566,7 @@
  *	@dst: buffer to read into
  *	@len: buffer length
  *
- *	Perform a psuedo DMA mode read from an NCR53C400 or equivalent
+ *	Perform a pseudo DMA mode read from an NCR53C400 or equivalent
  *	controller
  */
  
@@ -650,7 +650,7 @@
  *	@dst: buffer to read into
  *	@len: buffer length
  *
- *	Perform a psuedo DMA mode read from an NCR53C400 or equivalent
+ *	Perform a pseudo DMA mode read from an NCR53C400 or equivalent
  *	controller
  */
 
diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h
index 120a062..d969855 100644
--- a/drivers/scsi/gdth.h
+++ b/drivers/scsi/gdth.h
@@ -895,7 +895,7 @@
         u8          ldr_no;                 /* log. drive no. */
         u8          rw_attribs;             /* r/w attributes */
         u8          cluster_type;           /* cluster properties */
-        u8          media_changed;          /* Flag:MOUNT/UNMOUNT occured */
+        u8          media_changed;          /* Flag:MOUNT/UNMOUNT occurred */
         u32         start_sec;              /* start sector */
     } hdr[MAX_LDRIVES];                         /* host drives */
     struct {
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 2ce26eb..50bb541 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -300,7 +300,7 @@
 	/*
 	 * Rumors state that some GVP ram boards use the same product
 	 * code as the SCSI controllers. Therefore if the board-size
-	 * is not 64KB we asume it is a ram board and bail out.
+	 * is not 64KB we assume it is a ram board and bail out.
 	 */
 	if (zorro_resource_len(z) != 0x10000)
 		return -ENODEV;
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 99aa0e5..26cd9d1 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -3,7 +3,7 @@
  * 
  * (The IMM is the embedded controller in the ZIP Plus drive.)
  * 
- * My unoffical company acronym list is 21 pages long:
+ * My unofficial company acronym list is 21 pages long:
  *      FLA:    Four letter acronym with built in facility for
  *              future expansion to five letters.
  */
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 9627d06..dd741bc 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -242,7 +242,7 @@
 
 static u8 initio_rate_tbl[8] =	/* fast 20      */
 {
-				/* nanosecond devide by 4 */
+				/* nanosecond divide by 4 */
 	12,			/* 50ns,  20M   */
 	18,			/* 75ns,  13.3M */
 	25,			/* 100ns, 10M   */
@@ -1917,7 +1917,7 @@
 }
 
 /**
- *	int_initio_scsi_resel	-	Reselection occured
+ *	int_initio_scsi_resel	-	Reselection occurred
  *	@host: InitIO host adapter
  *
  *	A SCSI reselection event has been signalled and the interrupt
diff --git a/drivers/scsi/initio.h b/drivers/scsi/initio.h
index e58af9e..219b901 100644
--- a/drivers/scsi/initio.h
+++ b/drivers/scsi/initio.h
@@ -116,7 +116,7 @@
 #define TUL_SBusId      0x89	/* 09 R   SCSI BUS ID                   */
 #define TUL_STimeOut    0x8A	/* 0A W   Sel/Resel Time Out Register   */
 #define TUL_SIdent      0x8A	/* 0A R   Identify Message Register     */
-#define TUL_SAvail      0x8A	/* 0A R   Availiable Counter Register   */
+#define TUL_SAvail      0x8A	/* 0A R   Available Counter Register   */
 #define TUL_SData       0x8B	/* 0B R/W SCSI data in/out              */
 #define TUL_SFifo       0x8C	/* 0C R/W FIFO                          */
 #define TUL_SSignal     0x90	/* 10 R/W SCSI signal in/out            */
@@ -389,7 +389,7 @@
 /* Bit Definition for status */
 #define SCB_RENT        0x01
 #define SCB_PEND        0x02
-#define SCB_CONTIG      0x04	/* Contigent Allegiance */
+#define SCB_CONTIG      0x04	/* Contingent Allegiance */
 #define SCB_SELECT      0x08
 #define SCB_BUSY        0x10
 #define SCB_DONE        0x20
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index b2511ac..218f71a 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -137,7 +137,7 @@
 /*          - Fix path/name for scsi_hosts.h include for 2.6 kernels         */
 /*          - Fix sort order of 7k                                           */
 /*          - Remove 3 unused "inline" functions                             */
-/* 7.12.xx  - Use STATIC functions whereever possible                        */
+/* 7.12.xx  - Use STATIC functions wherever possible                        */
 /*          - Clean up deprecated MODULE_PARM calls                          */
 /* 7.12.05  - Remove Version Matching per IBM request                        */
 /*****************************************************************************/
@@ -1665,7 +1665,7 @@
 	int datasize;
 
 	/* Trombone is the only copperhead that can do packet flash, but only
-	 * for firmware. No one said it had to make sence. */
+	 * for firmware. No one said it had to make sense. */
 	if (IPS_IS_TROMBONE(ha) && pt->CoppCP.cmd.flashfw.type == IPS_FW_IMAGE) {
 		if (ips_usrcmd(ha, pt, scb))
 			return IPS_SUCCESS;
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index 4e49fbc..f2df059 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -1193,7 +1193,7 @@
 #define IPS_VER_SEBRING "7.12.02"
 #define IPS_VER_KEYWEST "7.12.02"
 
-/* Compatability IDs for various adapters */
+/* Compatibility IDs for various adapters */
 #define IPS_COMPAT_UNKNOWN ""
 #define IPS_COMPAT_CURRENT "KW710"
 #define IPS_COMPAT_SERVERAID1 "2.25.01"
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index a860452..3df9853 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -295,7 +295,7 @@
 		rc = iscsi_sw_tcp_xmit_segment(tcp_conn, segment);
 		/*
 		 * We may not have been able to send data because the conn
-		 * is getting stopped. libiscsi will know so propogate err
+		 * is getting stopped. libiscsi will know so propagate err
 		 * for it to do the right thing.
 		 */
 		if (rc == -EAGAIN)
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 28231ba..77035a7 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -1042,7 +1042,7 @@
 }
 
 /**
- * fc_seq_els_rsp_send() - Send an ELS response using infomation from
+ * fc_seq_els_rsp_send() - Send an ELS response using information from
  *			   the existing sequence/exchange.
  * @fp:	      The received frame
  * @els_cmd:  The ELS command to be sent
@@ -1153,7 +1153,7 @@
  * fc_exch_send_ba_rjt() - Send BLS Reject
  * @rx_fp:  The frame being rejected
  * @reason: The reason the frame is being rejected
- * @explan: The explaination for the rejection
+ * @explan: The explanation for the rejection
  *
  * This is for rejecting BA_ABTS only.
  */
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index b1b03af..5b799a3 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -870,7 +870,7 @@
 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
 				/*
 				 * The cmnd->underflow is the minimum number of
-				 * bytes that must be transfered for this
+				 * bytes that must be transferred for this
 				 * command.  Provided a sense condition is not
 				 * present, make sure the actual amount
 				 * transferred is at least the underflow value
@@ -1306,7 +1306,7 @@
 }
 
 /**
- * fc_tm_done() - Task Managment response handler
+ * fc_tm_done() - Task Management response handler
  * @seq: The sequence that the response is on
  * @fp:	 The response frame
  * @arg: The FCP packet the response is for
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 8c08b21..906bbca 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -52,7 +52,7 @@
  * while making the callback. To ensure that the rport is not free'd while
  * processing the callback the rport callbacks are serialized through a
  * single-threaded workqueue. An rport would never be free'd while in a
- * callback handler becuase no other rport work in this queue can be executed
+ * callback handler because no other rport work in this queue can be executed
  * at the same time.
  *
  * When discovery succeeds or fails a callback is made to the lport as
@@ -163,7 +163,7 @@
  * fc_lport_rport_callback() - Event handler for rport events
  * @lport: The lport which is receiving the event
  * @rdata: private remote port data
- * @event: The event that occured
+ * @event: The event that occurred
  *
  * Locking Note: The rport lock should not be held when calling
  *		 this function.
@@ -379,7 +379,7 @@
 
 /**
  * fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report.
- * @lport: Fibre Channel local port recieving the RLIR
+ * @lport: Fibre Channel local port receiving the RLIR
  * @fp:	   The RLIR request frame
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -396,7 +396,7 @@
 
 /**
  * fc_lport_recv_echo_req() - Handle received ECHO request
- * @lport: The local port recieving the ECHO
+ * @lport: The local port receiving the ECHO
  * @fp:	   ECHO request frame
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -432,7 +432,7 @@
 
 /**
  * fc_lport_recv_rnid_req() - Handle received Request Node ID data request
- * @lport: The local port recieving the RNID
+ * @lport: The local port receiving the RNID
  * @fp:	   The RNID request frame
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -491,7 +491,7 @@
 
 /**
  * fc_lport_recv_logo_req() - Handle received fabric LOGO request
- * @lport: The local port recieving the LOGO
+ * @lport: The local port receiving the LOGO
  * @fp:	   The LOGO request frame
  *
  * Locking Note: The lport lock is exected to be held before calling
@@ -771,7 +771,7 @@
 
 /**
  * fc_lport_recv_flogi_req() - Receive a FLOGI request
- * @lport: The local port that recieved the request
+ * @lport: The local port that received the request
  * @rx_fp: The FLOGI frame
  *
  * A received FLOGI request indicates a point-to-point connection.
@@ -858,7 +858,7 @@
  * if an rport should handle the request.
  *
  * Locking Note: This function should not be called with the lport
- *		 lock held becuase it will grab the lock.
+ *		 lock held because it will grab the lock.
  */
 static void fc_lport_recv_els_req(struct fc_lport *lport,
 				  struct fc_frame *fp)
@@ -925,7 +925,7 @@
  * @fp: The frame the request is in
  *
  * Locking Note: This function should not be called with the lport
- *		 lock held becuase it may grab the lock.
+ *		 lock held because it may grab the lock.
  */
 static void fc_lport_recv_req(struct fc_lport *lport,
 			      struct fc_frame *fp)
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index f3f693b..874e29d 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -240,7 +240,7 @@
 				       disc_resp, DISCOVER_RESP_SIZE);
 		if (res)
 			return res;
-		/* This is detecting a failure to transmit inital
+		/* This is detecting a failure to transmit initial
 		 * dev to host FIS as described in section G.5 of
 		 * sas-2 r 04b */
 		dr = &((struct smp_resp *)disc_resp)->disc;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 4e0faa0..17d7893 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4515,7 +4515,7 @@
  * Description:
  * This function is called by the transport after the @fc_vport's symbolic name
  * has been changed. This function re-registers the symbolic name with the
- * switch to propogate the change into the fabric if the vport is active.
+ * switch to propagate the change into the fabric if the vport is active.
  **/
 static void
 lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 793b9f1..77b2871 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1939,7 +1939,7 @@
  * @rxxri: Receive exchange id
  * @len: Number of data bytes
  *
- * This function allocates and posts a data buffer of sufficient size to recieve
+ * This function allocates and posts a data buffer of sufficient size to receive
  * an unsolicted CT command.
  **/
 static int lpfcdiag_loop_post_rxbufs(struct lpfc_hba *phba, uint16_t rxxri,
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index a753581..3d96774 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -908,7 +908,7 @@
 	if (!debug)
 		goto out;
 
-	/* Round to page boundry */
+	/* Round to page boundary */
 	printk(KERN_ERR "9059 BLKGRD:  %s: _dump_buf_data=0x%p\n",
 			__func__, _dump_buf_data);
 	debug->buffer = _dump_buf_data;
@@ -938,7 +938,7 @@
 	if (!debug)
 		goto out;
 
-	/* Round to page boundry */
+	/* Round to page boundary */
 	printk(KERN_ERR	"9060 BLKGRD: %s: _dump_buf_dif=0x%p file=%s\n",
 		__func__, _dump_buf_dif, file->f_dentry->d_name.name);
 	debug->buffer = _dump_buf_dif;
@@ -2158,7 +2158,7 @@
 			debugfs_create_dir(name, phba->hba_debugfs_root);
 		if (!vport->vport_debugfs_root) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-					 "0417 Cant create debugfs\n");
+					 "0417 Can't create debugfs\n");
 			goto debug_failed;
 		}
 		atomic_inc(&phba->debugfs_vport_count);
@@ -2211,7 +2211,7 @@
 				 vport, &lpfc_debugfs_op_nodelist);
 	if (!vport->debug_nodelist) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-				 "0409 Cant create debugfs nodelist\n");
+				 "0409 Can't create debugfs nodelist\n");
 		goto debug_failed;
 	}
 
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 735028f..d34b69f 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -102,7 +102,7 @@
 			 phba->pport->port_state);
 
 	/* CLEAR_LA should re-enable link attention events and
-	 * we should then imediately take a LATT event. The
+	 * we should then immediately take a LATT event. The
 	 * LATT processing should call lpfc_linkdown() which
 	 * will cleanup any left over in-progress discovery
 	 * events.
@@ -1599,7 +1599,7 @@
  * This routine is the completion callback function for issuing the Port
  * Login (PLOGI) command. For PLOGI completion, there must be an active
  * ndlp on the vport node list that matches the remote node ID from the
- * PLOGI reponse IOCB. If such ndlp does not exist, the PLOGI is simply
+ * PLOGI response IOCB. If such ndlp does not exist, the PLOGI is simply
  * ignored and command IOCB released. The PLOGI response IOCB status is
  * checked for error conditons. If there is error status reported, PLOGI
  * retry shall be attempted by invoking the lpfc_els_retry() routine.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 154c715..3014983 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -739,7 +739,7 @@
 
 /*
  * This is only called to handle FC worker events. Since this a rare
- * occurance, we allocate a struct lpfc_work_evt structure here instead of
+ * occurrence, we allocate a struct lpfc_work_evt structure here instead of
  * embedding it in the IOCB.
  */
 int
@@ -1348,7 +1348,7 @@
 	int rc;
 
 	spin_lock_irq(&phba->hbalock);
-	/* If the FCF is not availabe do nothing. */
+	/* If the FCF is not available do nothing. */
 	if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
 		phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
 		spin_unlock_irq(&phba->hbalock);
@@ -1538,7 +1538,7 @@
 
 		/*
 		 * If user did not specify any addressing mode, or if the
-		 * prefered addressing mode specified by user is not supported
+		 * preferred addressing mode specified by user is not supported
 		 * by FCF, allow fabric to pick the addressing mode.
 		 */
 		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
@@ -1553,7 +1553,7 @@
 				FCFCNCT_AM_SPMA) ?
 				LPFC_FCF_SPMA : LPFC_FCF_FPMA;
 		/*
-		 * If the user specified a prefered address mode, use the
+		 * If the user specified a preferred address mode, use the
 		 * addr mode only if FCF support the addr_mode.
 		 */
 		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
@@ -3117,7 +3117,7 @@
 		 * back at reg login state so this
 		 * mbox needs to be ignored becase
 		 * there is another reg login in
-		 * proccess.
+		 * process.
 		 */
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
@@ -4477,7 +4477,7 @@
 	if ((vport->fc_flag & FC_RSCN_MODE) &&
 	    !(vport->fc_flag & FC_NDISC_ACTIVE)) {
 		if (lpfc_rscn_payload_check(vport, did)) {
-			/* If we've already recieved a PLOGI from this NPort
+			/* If we've already received a PLOGI from this NPort
 			 * we don't need to try to discover it again.
 			 */
 			if (ndlp->nlp_flag & NLP_RCV_PLOGI)
@@ -4493,7 +4493,7 @@
 		} else
 			ndlp = NULL;
 	} else {
-		/* If we've already recieved a PLOGI from this NPort,
+		/* If we've already received a PLOGI from this NPort,
 		 * or we are already in the process of discovery on it,
 		 * we don't need to try to discover it again.
 		 */
@@ -5756,7 +5756,7 @@
  * @size: Size of the data buffer.
  * @rec_type: Record type to be searched.
  *
- * This function searches config region data to find the begining
+ * This function searches config region data to find the beginning
  * of the record specified by record_type. If record found, this
  * function return pointer to the record else return NULL.
  */
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index e6ebe51..505f884 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4466,7 +4466,7 @@
 }
 
 /**
- * lpfc_init_api_table_setup - Set up init api fucntion jump table
+ * lpfc_init_api_table_setup - Set up init api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -4850,7 +4850,7 @@
  *
  * Return codes
  * 	0 - successful
- * 	-ENOMEM - No availble memory
+ * 	-ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
@@ -5730,7 +5730,7 @@
  *
  * Return codes
  * 	0 - successful
- * 	-ENOMEM - No availble memory
+ * 	-ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -5835,7 +5835,7 @@
  *
  * Return codes
  * 	0 - successful
- * 	-ENOMEM - No availble memory
+ * 	-ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -5894,7 +5894,7 @@
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -6189,7 +6189,7 @@
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static void
@@ -6253,7 +6253,7 @@
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
@@ -6498,7 +6498,7 @@
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 void
@@ -6543,7 +6543,7 @@
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  **/
 static int
 lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
@@ -6704,7 +6704,7 @@
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index dba32df..fbab973 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1834,7 +1834,7 @@
  * @fcf_index: index to fcf table.
  *
  * This routine routine allocates and constructs non-embedded mailbox command
- * for reading a FCF table entry refered by @fcf_index.
+ * for reading a FCF table entry referred by @fcf_index.
  *
  * Return: pointer to the mailbox command constructed if successful, otherwise
  * NULL.
diff --git a/drivers/scsi/lpfc/lpfc_nl.h b/drivers/scsi/lpfc/lpfc_nl.h
index f3cfbe2..f2b1bbc 100644
--- a/drivers/scsi/lpfc/lpfc_nl.h
+++ b/drivers/scsi/lpfc/lpfc_nl.h
@@ -50,7 +50,7 @@
  * and subcategory. The event type must come first.
  * The subcategory further defines the data that follows in the rest
  * of the payload. Each category will have its own unique header plus
- * any addtional data unique to the subcategory.
+ * any additional data unique to the subcategory.
  * The payload sent via the fc transport is one-way driver->application.
  */
 
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 52b3515..0d92d42 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -658,7 +658,7 @@
 	return 0;
 }
 /**
- * lpfc_release_rpi - Release a RPI by issueing unreg_login mailbox cmd.
+ * lpfc_release_rpi - Release a RPI by issuing unreg_login mailbox cmd.
  * @phba : Pointer to lpfc_hba structure.
  * @vport: Pointer to lpfc_vport structure.
  * @rpi  : rpi to be release.
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 2b962b02..fe7cc84 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -577,7 +577,7 @@
 			iocb->un.fcpi64.bdl.addrHigh = 0;
 			iocb->ulpBdeCount = 0;
 			iocb->ulpLe = 0;
-			/* fill in responce BDE */
+			/* fill in response BDE */
 			iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
 							BUFF_TYPE_BDE_64;
 			iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
@@ -1217,10 +1217,10 @@
 				     (2 * sizeof(struct ulp_bde64)));
 			data_bde->addrHigh = putPaddrHigh(physaddr);
 			data_bde->addrLow = putPaddrLow(physaddr);
-			/* ebde count includes the responce bde and data bpl */
+			/* ebde count includes the response bde and data bpl */
 			iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
 		} else {
-			/* ebde count includes the responce bde and data bdes */
+			/* ebde count includes the response bde and data bdes */
 			iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
 		}
 	} else {
@@ -2380,7 +2380,7 @@
 		}
 		/*
 		 * The cmnd->underflow is the minimum number of bytes that must
-		 * be transfered for this command.  Provided a sense condition
+		 * be transferred for this command.  Provided a sense condition
 		 * is not present, make sure the actual amount transferred is at
 		 * least the underflow value or fail.
 		 */
@@ -2873,7 +2873,7 @@
 }
 
 /**
- * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * lpfc_scsi_api_table_setup - Set up scsi api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 5932273..ce645b2 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -130,7 +130,7 @@
 	dma_addr_t nonsg_phys;	/* Non scatter-gather physical address. */
 
 	/*
-	 * data and dma_handle are the kernel virutal and bus address of the
+	 * data and dma_handle are the kernel virtual and bus address of the
 	 * dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter
 	 * gather bde list that supports the sg_tablesize value.
 	 */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 4746dcd..dacabbe 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -2817,7 +2817,7 @@
  * This function is called from the interrupt context when there is a ring
  * event for the fcp ring. The caller does not hold any lock.
  * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
+ * finds an iocb with LE bit set and chains all the iocbs up to the iocb with
  * LE bit set. The function will call the completion handler of the command iocb
  * if the response iocb indicates a completion for a command iocb or it is
  * an abort completion. The function will call lpfc_sli_process_unsol_iocb
@@ -5117,7 +5117,7 @@
 
 	/* Setting state unknown so lpfc_sli_abort_iocb_ring
 	 * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
-	 * it to fail all oustanding SCSI IO.
+	 * it to fail all outstanding SCSI IO.
 	 */
 	spin_lock_irq(&phba->pport->work_port_lock);
 	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
@@ -6031,7 +6031,7 @@
 }
 
 /**
- * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * lpfc_mbox_api_table_setup - Set up mbox api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -6847,7 +6847,7 @@
 }
 
 /**
- * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * lpfc_sli_api_table_setup - Set up sli api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -7521,7 +7521,7 @@
 	struct lpfc_dmabuf *mp, *next_mp;
 	struct list_head *slp = &pring->postbufq;
 
-	/* Search postbufq, from the begining, looking for a match on tag */
+	/* Search postbufq, from the beginning, looking for a match on tag */
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
 		if (mp->buffer_tag == tag) {
@@ -7565,7 +7565,7 @@
 	struct lpfc_dmabuf *mp, *next_mp;
 	struct list_head *slp = &pring->postbufq;
 
-	/* Search postbufq, from the begining, looking for a match on phys */
+	/* Search postbufq, from the beginning, looking for a match on phys */
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
 		if (mp->phys == phys) {
@@ -8438,7 +8438,7 @@
  * for possible error attention events. The caller must hold the hostlock
  * with spin_lock_irq().
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 static int
@@ -8491,7 +8491,7 @@
  * for possible error attention events. The caller must hold the hostlock
  * with spin_lock_irq().
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 static int
@@ -8581,7 +8581,7 @@
  * This function is called from timer soft interrupt context to check HBA's
  * error attention register bit for error attention events.
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 int
@@ -9684,7 +9684,7 @@
  * @cq: Pointer to the completion queue.
  * @wcqe: Pointer to a completion queue entry.
  *
- * This routine process a slow-path work-queue or recieve queue completion queue
+ * This routine process a slow-path work-queue or receive queue completion queue
  * entry.
  *
  * Return: true if work posted to worker thread, otherwise false.
@@ -12971,7 +12971,7 @@
  * record and processing it one at a time starting from the @fcf_index
  * for initial FCF discovery or fast FCF failover rediscovery.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
@@ -13032,7 +13032,7 @@
  * This routine is invoked to read an FCF record indicated by @fcf_index
  * and to use it for FLOGI roundrobin FCF failover.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
@@ -13078,7 +13078,7 @@
  * This routine is invoked to read an FCF record indicated by @fcf_index to
  * determine whether it's eligible for FLOGI roundrobin failover list.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index c212694..f2684dd 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -284,7 +284,7 @@
 
 	adapter->host->max_id = 16;	/* max targets per channel */
 
-	adapter->host->max_lun = 7;	/* Upto 7 luns for non disk devices */
+	adapter->host->max_lun = 7;	/* Up to 7 luns for non disk devices */
 
 	adapter->host->cmd_per_lun = max_cmd_per_lun;
 
@@ -3734,7 +3734,7 @@
 	 * check is the application conforms to NIT. We do not have to do much
 	 * in that case.
 	 * We exploit the fact that the signature is stored in the very
-	 * begining of the structure.
+	 * beginning of the structure.
 	 */
 
 	if( copy_from_user(signature, arg, 7) )
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 8534119..9a7897f 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -532,9 +532,9 @@
 
 /*
  * struct mcontroller is used to pass information about the controllers in the
- * system. Its upto the application how to use the information. We are passing
+ * system. Its up to the application how to use the information. We are passing
  * as much info about the cards as possible and useful. Before issuing the
- * call to find information about the cards, the applicaiton needs to issue a
+ * call to find information about the cards, the application needs to issue a
  * ioctl first to find out the number of controllers in the system.
  */
 #define MAX_CONTROLLERS 32
@@ -804,7 +804,7 @@
 	unsigned long		base;
 	void __iomem		*mmio_base;
 
-	/* mbox64 with mbox not aligned on 16-byte boundry */
+	/* mbox64 with mbox not aligned on 16-byte boundary */
 	mbox64_t	*una_mbox64;
 	dma_addr_t	una_mbox64_dma;
 
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index ce2487a..e01c6f7 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -660,7 +660,7 @@
  * @lparam	: logical drives parameters
  * @span	: span
  *
- * 8-LD logical drive with upto 8 spans
+ * 8-LD logical drive with up to 8 spans
  */
 typedef struct {
 	logdrv_param_t	lparam;
@@ -673,7 +673,7 @@
  * @lparam	: logical drives parameters
  * @span	: span
  *
- * 8-LD logical drive with upto 4 spans
+ * 8-LD logical drive with up to 4 spans
  */
 typedef struct {
 	logdrv_param_t	lparam;
@@ -720,7 +720,7 @@
  * @ldrv	: logical drives information
  * @pdrv	: physical drives information
  *
- * Disk array for 8LD logical drives with upto 8 spans
+ * Disk array for 8LD logical drives with up to 8 spans
  */
 typedef struct {
 	uint8_t			numldrv;
@@ -737,7 +737,7 @@
  * @ldrv	: logical drives information
  * @pdrv	: physical drives information
  *
- * Disk array for 8LD logical drives with upto 4 spans
+ * Disk array for 8LD logical drives with up to 4 spans
  */
 typedef struct {
 	uint8_t			numldrv;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 5708cb2..1dba328 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -2689,7 +2689,7 @@
 				(MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i));
 		}
 
-		// bailout if no recovery happended in reset time
+		// bailout if no recovery happened in reset time
 		if (adapter->outstanding_cmds == 0) {
 			break;
 		}
@@ -3452,7 +3452,7 @@
  * megaraid_mbox_setup_device_map - manage device ids
  * @adapter	: Driver's soft state
  *
- * Manange the device ids to have an appropraite mapping between the kernel
+ * Manange the device ids to have an appropriate mapping between the kernel
  * scsi addresses and megaraid scsi and logical drive addresses. We export
  * scsi devices on their actual addresses, whereas the logical drives are
  * exported on a virtual scsi channel.
@@ -3973,7 +3973,7 @@
  * NOTE: The commands issuance functionality is not generalized and
  * implemented in context of "get ld map" command only. If required, the
  * command issuance logical can be trivially pulled out and implemented as a
- * standalone libary. For now, this should suffice since there is no other
+ * standalone library. For now, this should suffice since there is no other
  * user of this interface.
  *
  * Return 0 on success.
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 635b228..046dcc6 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1347,7 +1347,7 @@
 	struct timer_list io_completion_timer;
 	struct list_head internal_reset_pending_q;
 
-	/* Ptr to hba specfic information */
+	/* Ptr to hba specific information */
 	void *ctrl_context;
 	u8	msi_flag;
 	struct msix_entry msixentry;
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index bbd10c8..66d4cea 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1698,7 +1698,7 @@
  * megasas_wait_for_outstanding -	Wait for all outstanding cmds
  * @instance:				Adapter soft state
  *
- * This function waits for upto MEGASAS_RESET_WAIT_TIME seconds for FW to
+ * This function waits for up to MEGASAS_RESET_WAIT_TIME seconds for FW to
  * complete all its outstanding commands. Returns error if one or more IOs
  * are pending after this time period. It also marks the controller dead.
  */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
index 20e6b88..165454d 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
@@ -21,7 +21,7 @@
  *  05-21-08  02.00.05  Fixed typo in name of Mpi2SepRequest_t.
  *  10-02-08  02.00.06  Removed Untagged and No Disconnect values from SCSI IO
  *                      Control field Task Attribute flags.
- *                      Moved LUN field defines to mpi2.h becasue they are
+ *                      Moved LUN field defines to mpi2.h because they are
  *                      common to many structures.
  *  05-06-09  02.00.07  Changed task management type of Query Unit Attention to
  *                      Query Asynchronous Event.
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 5e001ff..3346357 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -925,7 +925,7 @@
 }
 
 /**
- * mpt2sas_base_release_callback_handler - clear interupt callback handler
+ * mpt2sas_base_release_callback_handler - clear interrupt callback handler
  * @cb_idx: callback index
  *
  * Return nothing.
@@ -1113,7 +1113,7 @@
  * @ioc: per adapter object
  *
  * Check to see if card is capable of MSIX, and set number
- * of avaliable msix vectors
+ * of available msix vectors
  */
 static int
 _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
@@ -1595,7 +1595,7 @@
 
 
 /**
- * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware
+ * mpt2sas_base_put_smid_hi_priority - send Task Management request to firmware
  * @ioc: per adapter object
  * @smid: system request message index
  *
@@ -2599,7 +2599,7 @@
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
 			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successfull count(%d), timeout(%d)\n", ioc->name,
+			    "successful count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
 		}
@@ -2640,7 +2640,7 @@
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
 			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successfull count(%d), timeout(%d)\n", ioc->name,
+			    "successful count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
 		} else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
@@ -2688,7 +2688,7 @@
 		doorbell_reg = readl(&ioc->chip->Doorbell);
 		if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
 			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successfull count(%d), timeout(%d)\n", ioc->name,
+			    "successful count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
 		}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 6afd67b..6861244 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -93,7 +93,7 @@
  * @mpi_reply: reply message frame
  * Context: none.
  *
- * Function for displaying debug info helpfull when debugging issues
+ * Function for displaying debug info helpful when debugging issues
  * in this module.
  */
 static void
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index e92b77a..1c6d2b4 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -116,7 +116,7 @@
  * @mpi_reply: reply message frame
  * Context: none.
  *
- * Function for displaying debug info helpfull when debugging issues
+ * Function for displaying debug info helpful when debugging issues
  * in this module.
  */
 static void
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 6ceb775..d2064a0 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -397,7 +397,7 @@
  * @is_raid: [flag] 1 = raid object, 0 = sas object
  *
  * Determines whether this device should be first reported device to
- * to scsi-ml or sas transport, this purpose is for persistant boot device.
+ * to scsi-ml or sas transport, this purpose is for persistent boot device.
  * There are primary, alternate, and current entries in bios page 2. The order
  * priority is primary, alternate, then current.  This routine saves
  * the corresponding device object and is_raid flag in the ioc object.
@@ -2671,10 +2671,10 @@
  * @handle: device handle
  * Context: interrupt time.
  *
- * This code is to initiate the device removal handshake protocal
+ * This code is to initiate the device removal handshake protocol
  * with controller firmware.  This function will issue target reset
  * using high priority request queue.  It will send a sas iounit
- * controll request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
+ * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
  *
  * This is designed to send muliple task management request at the same
  * time to the fifo. If the fifo is full, we will append the request,
@@ -2749,9 +2749,9 @@
  * @reply: reply message frame(lower 32bit addr)
  * Context: interrupt time.
  *
- * This is the sas iounit controll completion routine.
+ * This is the sas iounit control completion routine.
  * This code is part of the code to initiate the device removal
- * handshake protocal with controller firmware.
+ * handshake protocol with controller firmware.
  *
  * Return 1 meaning mf should be freed from _base_interrupt
  *        0 means the mf is freed from this function.
@@ -2878,8 +2878,8 @@
  *
  * This is the target reset completion routine.
  * This code is part of the code to initiate the device removal
- * handshake protocal with controller firmware.
- * It will send a sas iounit controll request (MPI2_SAS_OP_REMOVE_DEVICE)
+ * handshake protocol with controller firmware.
+ * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
  *
  * Return 1 meaning mf should be freed from _base_interrupt
  *        0 means the mf is freed from this function.
@@ -2984,7 +2984,7 @@
  *
  * This routine added to better handle cable breaker.
  *
- * This handles the case where driver recieves multiple expander
+ * This handles the case where driver receives multiple expander
  * add and delete events in a single shot.  When there is a delete event
  * the routine will void any pending add events waiting in the event queue.
  *
@@ -3511,7 +3511,7 @@
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 /**
- * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request
+ * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request
  * @ioc: per adapter object
  * @scmd: pointer to scsi command object
  * @mpi_reply: reply mf payload returned from firmware
@@ -5138,7 +5138,7 @@
 	unsigned long flags;
 	int r;
 
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: "
+	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primitive: "
 	    "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
 	    event_data->PortWidth));
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 46cc382..835d8d6 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -2679,7 +2679,7 @@
 }/*-------------------------< RESEL_TAG >-------------------*/,{
 	/*
 	**	Read IDENTIFY + SIMPLE + TAG using a single MOVE.
-	**	Agressive optimization, is'nt it?
+	**	Aggressive optimization, is'nt it?
 	**	No need to test the SIMPLE TAG message, since the 
 	**	driver only supports conformant devices for tags. ;-)
 	*/
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 6b8b021..f6a50c9 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -1288,7 +1288,7 @@
 			nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx", 
 				    nsp32_read4(base, SAVED_SACK_CNT));
 
-			scsi_set_resid(SCpnt, 0); /* all data transfered! */
+			scsi_set_resid(SCpnt, 0); /* all data transferred! */
 		}
 
 		/*
@@ -1630,7 +1630,7 @@
 
 			/*
 			 * If SAVEDSACKCNT == 0, it means SavedDataPointer is
-			 * come after data transfering.
+			 * come after data transferring.
 			 */
 			if (s_sacklen > 0) {
 				/*
@@ -1785,7 +1785,7 @@
 		   the head element of the sg. restlen is correctly calculated. */
 	}
 
-	/* calculate the rest length for transfering */
+	/* calculate the rest length for transferring */
 	restlen = sentlen - s_sacklen;
 
 	/* update adjusting current SG table entry */
diff --git a/drivers/scsi/nsp32.h b/drivers/scsi/nsp32.h
index 9565acf..c022182 100644
--- a/drivers/scsi/nsp32.h
+++ b/drivers/scsi/nsp32.h
@@ -507,7 +507,7 @@
 /*
  * SCSI TARGET/LUN definition
  */
-#define NSP32_HOST_SCSIID    7  /* SCSI initiator is everytime defined as 7 */
+#define NSP32_HOST_SCSIID    7  /* SCSI initiator is every time defined as 7 */
 #define MAX_TARGET	     8
 #define MAX_LUN		     8	/* XXX: In SPI3, max number of LUN is 64. */
 
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 521e218..58f5be4 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -1366,7 +1366,7 @@
 /* The values below are based on the OnStream frame payload size of 32K == 2**15,
  * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block
  * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions
- * inside each frame. Finaly, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1.
+ * inside each frame. Finally, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1.
  */
 #define OSST_FRAME_SHIFT  6
 #define OSST_SECTOR_SHIFT 9
@@ -3131,7 +3131,7 @@
 		}
 #if DEBUG
 		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transfering %d bytes in %d lblocks.\n",
+			printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transferring %d bytes in %d lblocks.\n",
 			  			 name, offset, transfer, blks);
 #endif
 
@@ -3811,7 +3811,7 @@
 
 			if (transfer == 0) {
 				printk(KERN_WARNING
-				  "%s:W: Nothing can be transfered, requested %Zd, tape block size (%d%c).\n",
+				  "%s:W: Nothing can be transferred, requested %Zd, tape block size (%d%c).\n",
 			   		name, count, STp->block_size < 1024?
 					STp->block_size:STp->block_size/1024,
 				       	STp->block_size<1024?'b':'k');
diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h
index 11d26c5..b4fea98 100644
--- a/drivers/scsi/osst.h
+++ b/drivers/scsi/osst.h
@@ -413,7 +413,7 @@
  * AUX
  */
 typedef struct os_aux_s {
-        __be32          format_id;              /* hardware compability AUX is based on */
+        __be32          format_id;              /* hardware compatibility AUX is based on */
         char            application_sig[4];     /* driver used to write this media */
         __be32          hdwr;                   /* reserved */
         __be32          update_frame_cntr;      /* for configuration frame */
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index be3f33d..54bdf6d 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -742,7 +742,7 @@
 
 		res = nsp_fifo_count(SCpnt) - ocount;
 		//nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x ocount=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount, res);
-		if (res == 0) { /* if some data avilable ? */
+		if (res == 0) { /* if some data available ? */
 			if (stat == BUSPHASE_DATA_IN) { /* phase changed? */
 				//nsp_dbg(NSP_DEBUG_DATA_IO, " wait for data this=%d", SCpnt->SCp.this_residual);
 				continue;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 18b6c55..8b7db1e 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -339,7 +339,7 @@
 
 /**
  * bar4_shift - function is called to shift BAR base address
- * @pm8001_ha : our hba card infomation
+ * @pm8001_ha : our hba card information
  * @shiftValue : shifting value in memory bar.
  */
 static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
index 833a520..9091320 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.h
+++ b/drivers/scsi/pm8001/pm8001_hwi.h
@@ -209,7 +209,7 @@
 
 /*
  * brief the data structure of SATA Completion Response
- * use to discribe the sata task response (64 bytes)
+ * use to describe the sata task response (64 bytes)
  */
 struct sata_completion_resp {
 	__le32	tag;
@@ -951,7 +951,7 @@
 #define PCIE_EVENT_INTERRUPT		0x003044
 #define PCIE_ERROR_INTERRUPT_ENABLE	0x003048
 #define PCIE_ERROR_INTERRUPT		0x00304C
-/* signature defintion for host scratch pad0 register */
+/* signature definition for host scratch pad0 register */
 #define SPC_SOFT_RESET_SIGNATURE	0x252acbcd
 /* Signature for Soft Reset */
 
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index bdb6b27..aa05e66 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -445,7 +445,7 @@
 struct fw_control_ex {
 	struct fw_control_info *fw_control;
 	void			*buffer;/* keep buffer pointer to be
-	freed when the responce comes*/
+	freed when the response comes*/
 	void			*virtAddr;/* keep virtual address of the data */
 	void			*usrAddr;/* keep virtual address of the
 	user data */
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index bcf858e..96d5ad0 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -213,7 +213,7 @@
  * pmcraid_slave_configure - Configures a SCSI device
  * @scsi_dev: scsi device struct
  *
- * This fucntion is executed by SCSI mid layer just after a device is first
+ * This function is executed by SCSI mid layer just after a device is first
  * scanned (i.e. it has responded to an INQUIRY). For VSET resources, the
  * timeout value (default 30s) will be over-written to a higher value (60s)
  * and max_sectors value will be over-written to 512. It also sets queue depth
@@ -2122,7 +2122,7 @@
  *
  * This function executes most of the steps required for IOA reset. This gets
  * called by user threads (modprobe/insmod/rmmod) timer, tasklet and midlayer's
- * 'eh_' thread. Access to variables used for controling the reset sequence is
+ * 'eh_' thread. Access to variables used for controlling the reset sequence is
  * synchronized using host lock. Various functions called during reset process
  * would make use of a single command block, pointer to which is also stored in
  * adapter instance structure.
@@ -2994,7 +2994,7 @@
 
 	/* If the abort task is not timed out we will get a Good completion
 	 * as sense_key, otherwise we may get one the following responses
-	 * due to subsquent bus reset or device reset. In case IOASC is
+	 * due to subsequent bus reset or device reset. In case IOASC is
 	 * NR_SYNC_REQUIRED, set sync_reqd flag for the corresponding resource
 	 */
 	if (ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET ||
@@ -3933,7 +3933,7 @@
 
 			/* if abort task couldn't find the command i.e it got
 			 * completed prior to aborting, return good completion.
-			 * if command got aborted succesfully or there was IOA
+			 * if command got aborted successfully or there was IOA
 			 * reset due to abort task itself getting timedout then
 			 * return -ETIMEDOUT
 			 */
@@ -5932,7 +5932,7 @@
 	 * However, firmware supports 64-bit streaming DMA buffers, whereas
 	 * coherent buffers are to be 32-bit. Since pci_alloc_consistent always
 	 * returns memory within 4GB (if not, change this logic), coherent
-	 * buffers are within firmware acceptible address ranges.
+	 * buffers are within firmware acceptable address ranges.
 	 */
 	if ((sizeof(dma_addr_t) == 4) ||
 	    pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 4db210d..34e4c91 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -1024,7 +1024,7 @@
 
 
 /*
- * pmcraid_ioctl_header - definition of header structure that preceeds all the
+ * pmcraid_ioctl_header - definition of header structure that precedes all the
  * buffers given as ioctl arguments.
  *
  * .signature           : always ASCII string, "PMCRAID"
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 5dec684..8ba5744 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -78,7 +78,7 @@
 	- Clean up vchan handling
     Rev  3.23.33 July 3, 2003, Jes Sorensen
 	- Don't define register access macros before define determining MMIO.
-	  This just happend to work out on ia64 but not elsewhere.
+	  This just happened to work out on ia64 but not elsewhere.
 	- Don't try and read from the card while it is in reset as
 	  it won't respond and causes an MCA
     Rev  3.23.32 June 23, 2003, Jes Sorensen
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 6c51c0a..ee20353 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2086,7 +2086,7 @@
 };
 
 /*
- * SNS command structures -- for 2200 compatability.
+ * SNS command structures -- for 2200 compatibility.
  */
 #define	RFT_ID_SNS_SCMD_LEN	22
 #define	RFT_ID_SNS_CMD_SIZE	60
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 631fefc..f5ba09c 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -539,7 +539,7 @@
 	 * If DIF Error is set in comp_status, these additional fields are
 	 * defined:
 	 * &data[10] : uint8_t report_runt_bg[2];	- computed guard
-	 * &data[12] : uint8_t actual_dif[8];		- DIF Data recieved
+	 * &data[12] : uint8_t actual_dif[8];		- DIF Data received
 	 * &data[20] : uint8_t expected_dif[8];		- DIF Data computed
 	*/
 };
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d17ed9a..712518d 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -414,7 +414,7 @@
 				    "marked OFFLINE!\n");
 				vha->flags.online = 0;
 			} else {
-				/* Check to see if MPI timeout occured */
+				/* Check to see if MPI timeout occurred */
 				if ((mbx & MBX_3) && (ha->flags.port0))
 					set_bit(MPI_RESET_NEEDED,
 					    &vha->dpc_flags);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7a7c0ec..3489339 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -303,7 +303,7 @@
 			    !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
 
 				qla_printk(KERN_WARNING, ha,
-				    "Mailbox command timeout occured. "
+				    "Mailbox command timeout occurred. "
 				    "Scheduling ISP " "abort. eeh_busy: 0x%x\n",
 				    ha->flags.eeh_busy);
 				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
@@ -321,7 +321,7 @@
 			    !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
 
 				qla_printk(KERN_WARNING, ha,
-				    "Mailbox command timeout occured. "
+				    "Mailbox command timeout occurred. "
 				    "Issuing ISP abort.\n");
 
 				set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
@@ -3789,7 +3789,7 @@
 	mcp->mb[20] = LSW(MSD(mreq->send_dma));
 	mcp->mb[21] = MSW(MSD(mreq->send_dma));
 
-	/* recieve data address */
+	/* receive data address */
 	mcp->mb[16] = LSW(mreq->rcv_dma);
 	mcp->mb[17] = MSW(mreq->rcv_dma);
 	mcp->mb[6] = LSW(MSD(mreq->rcv_dma));
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 76ec876..455fe13 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2598,7 +2598,7 @@
  * qla82xx_start_scsi() - Send a SCSI command to the ISP
  * @sp: command to send to the ISP
  *
- * Returns non-zero if a failure occured, else zero.
+ * Returns non-zero if a failure occurred, else zero.
  */
 int
 qla82xx_start_scsi(srb_t *sp)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 75a966c..aa77475 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1046,7 +1046,7 @@
 
 eh_bus_reset_done:
 	qla_printk(KERN_INFO, vha->hw, "%s: reset %s\n", __func__,
-	    (ret == FAILED) ? "failed" : "succeded");
+	    (ret == FAILED) ? "failed" : "succeeded");
 
 	return ret;
 }
@@ -1136,7 +1136,7 @@
 
 eh_host_reset_lock:
 	qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
-	    (ret == FAILED) ? "failed" : "succeded");
+	    (ret == FAILED) ? "failed" : "succeeded");
 
 	return ret;
 }
@@ -3902,7 +3902,7 @@
 			continue;
 		if (atomic_read(&other_pdev->enable_cnt)) {
 			DEBUG17(qla_printk(KERN_INFO, ha,
-			    "Found PCI func availabe and enabled at 0x%x\n",
+			    "Found PCI func available and enabled at 0x%x\n",
 			    fn));
 			pci_dev_put(other_pdev);
 			break;
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index c1f8d1b..4757878 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -182,7 +182,7 @@
 	uint16_t flags;		/* (1) Status flags. */
 
 #define SRB_DMA_VALID		BIT_3	/* DMA Buffer mapped. */
-#define SRB_GOT_SENSE		BIT_4	/* sense data recieved. */
+#define SRB_GOT_SENSE		BIT_4	/* sense data received. */
 	uint8_t state;		/* (1) Status flags. */
 
 #define SRB_NO_QUEUE_STATE	 0	/* Request is in between states */
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index bbb2e90..48e2241 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -1338,7 +1338,7 @@
 	}
 
 	DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no,
-	    status == QLA_ERROR ? "FAILED" : "SUCCEDED"));
+	    status == QLA_ERROR ? "FAILED" : "SUCCEEDED"));
 	return status;
 }
 
diff --git a/drivers/scsi/qla4xxx/ql4_nvram.h b/drivers/scsi/qla4xxx/ql4_nvram.h
index b3831bd2..945cc32 100644
--- a/drivers/scsi/qla4xxx/ql4_nvram.h
+++ b/drivers/scsi/qla4xxx/ql4_nvram.h
@@ -28,7 +28,7 @@
 #define	 FM93C56A_ERASE	      0x3
 #define	 FM93C56A_ERASE_ALL   0x0
 
-/* Command Extentions */
+/* Command Extensions */
 #define	 FM93C56A_WEN_EXT	 0x3
 #define	 FM93C56A_WRITE_ALL_EXT	 0x1
 #define	 FM93C56A_WDS_EXT	 0x0
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index a4acb0d..230ba09 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -1213,7 +1213,7 @@
 
 	clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
 	DEBUG2(printk("scsi%ld: recover adapter: %s\n", ha->host_no,
-	    status == QLA_ERROR ? "FAILED" : "SUCCEDED"));
+	    status == QLA_ERROR ? "FAILED" : "SUCCEEDED"));
 
 	return status;
 }
@@ -2110,7 +2110,7 @@
 
 	ql4_printk(KERN_INFO, ha,
 	    "scsi%ld:%d:%d: Abort command - %s\n",
-	    ha->host_no, id, lun, (ret == SUCCESS) ? "succeded" : "failed");
+	    ha->host_no, id, lun, (ret == SUCCESS) ? "succeeded" : "failed");
 
 	return ret;
 }
@@ -2278,7 +2278,7 @@
 		return_status = SUCCESS;
 
 	ql4_printk(KERN_INFO, ha, "HOST RESET %s.\n",
-		   return_status == FAILED ? "FAILED" : "SUCCEDED");
+		   return_status == FAILED ? "FAILED" : "SUCCEEDED");
 
 	return return_status;
 }
@@ -2492,7 +2492,7 @@
 	/* Initialize device or resume if in suspended state */
 	rc = pci_enable_device(pdev);
 	if (rc) {
-		ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Cant re-enable "
+		ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Can't re-enable "
 		    "device after reset\n", ha->host_no, __func__);
 		goto exit_slot_reset;
 	}
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index fa5758c..6888b2c 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2454,7 +2454,7 @@
 		printk(KERN_INFO "scsi_debug: slave_destroy <%u %u %u %u>\n",
 		       sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
 	if (devip) {
-		/* make this slot avaliable for re-use */
+		/* make this slot available for re-use */
 		devip->used = 0;
 		sdp->hostdata = NULL;
 	}
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index a2ed201..26a8a45 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -499,7 +499,7 @@
 				SCSI_NL_GRP_CNT, scsi_nl_rcv_msg, NULL,
 				THIS_MODULE);
 	if (!scsi_nl_sock) {
-		printk(KERN_ERR "%s: register of recieve handler failed\n",
+		printk(KERN_ERR "%s: register of receive handler failed\n",
 				__func__);
 		netlink_unregister_notifier(&scsi_netlink_notifier);
 		return;
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index f672820..8bca8c2 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -93,7 +93,7 @@
 
 	/*
 	 * The blk helpers are used to the READ/WRITE requests
-	 * transfering data from a initiator point of view. Since
+	 * transferring data from a initiator point of view. Since
 	 * we are in target mode we want the opposite.
 	 */
 	rq = blk_get_request(shost->uspace_req_q, !write, gfp_mask);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 2941d2d..fdf3fa6 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -2378,7 +2378,7 @@
  * fc_remove_host - called to terminate any fc_transport-related elements for a scsi host.
  * @shost:	Which &Scsi_Host
  *
- * This routine is expected to be called immediately preceeding the
+ * This routine is expected to be called immediately preceding the
  * a driver's call to scsi_remove_host().
  *
  * WARNING: A driver utilizing the fc_transport, which fails to call
@@ -2458,7 +2458,7 @@
 }
 
 /**
- * fc_starget_delete - called to delete the scsi decendents of an rport
+ * fc_starget_delete - called to delete the scsi descendants of an rport
  * @work:	remote port to be operated on.
  *
  * Deletes target and all sdevs.
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b61ebec..bd0806e 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1055,7 +1055,7 @@
  *	@arg: this is third argument given to ioctl(2) system call.
  *	Often contains a pointer.
  *
- *	Returns 0 if successful (some ioctls return postive numbers on
+ *	Returns 0 if successful (some ioctls return positive numbers on
  *	success as well). Returns a negated errno value in case of error.
  *
  *	Note: most ioctls are forward onto the block subsystem or further
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index aefadc6..95019c7 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -567,7 +567,7 @@
 	.revalidate_disk = sr_block_revalidate_disk,
 	/* 
 	 * No compat_ioctl for now because sr_block_ioctl never
-	 * seems to pass arbitary ioctls down to host drivers.
+	 * seems to pass arbitrary ioctls down to host drivers.
 	 */
 };
 
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 4f0e548..07eaef1 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -467,7 +467,7 @@
  *
  * Parameters: struct scsi_cmnd *cmd
  *    The command to work on. The first scatter buffer's data are
- *    assumed to be already transfered into ptr/this_residual.
+ *    assumed to be already transferred into ptr/this_residual.
  */
 
 static void merge_contiguous_buffers(struct scsi_cmnd *cmd)
@@ -1717,7 +1717,7 @@
  *	bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *	maximum number of bytes, 0 if all bytes are transfered or exit
+ *	maximum number of bytes, 0 if all bytes are transferred or exit
  *	is in same phase.
  *
  * 	Also, *phase, *count, *data are modified in place.
@@ -1904,7 +1904,7 @@
  *	bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *	maximum number of bytes, 0 if all bytes or transfered or exit
+ *	maximum number of bytes, 0 if all bytes or transferred or exit
  *	is in same phase.
  *
  * 	Also, *phase, *count, *data are modified in place.
diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c
index 190107a..012c86e 100644
--- a/drivers/scsi/sym53c416.c
+++ b/drivers/scsi/sym53c416.c
@@ -774,7 +774,7 @@
 
 	/* printk("sym53c416_reset\n"); */
 	base = SCpnt->device->host->io_port;
-	/* search scsi_id - fixme, we shouldnt need to iterate for this! */
+	/* search scsi_id - fixme, we shouldn't need to iterate for this! */
 	for(i = 0; i < host_index && scsi_id == -1; i++)
 		if(hosts[i].base == base)
 			scsi_id = hosts[i].scsi_id;
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw1.h b/drivers/scsi/sym53c8xx_2/sym_fw1.h
index 7b08d6c..63952ee 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw1.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw1.h
@@ -1449,7 +1449,7 @@
 		PADDR_B (msg_weird_seen),
 	/*
 	 *  We donnot handle extended messages from SCRIPTS.
-	 *  Read the amount of data correponding to the 
+	 *  Read the amount of data corresponding to the 
 	 *  message length and call the C code.
 	 */
 	SCR_COPY (1),
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h
index ae1fb17..c87d724 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw2.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h
@@ -1326,7 +1326,7 @@
 		PADDR_B (msg_weird_seen),
 	/*
 	 *  We donnot handle extended messages from SCRIPTS.
-	 *  Read the amount of data correponding to the 
+	 *  Read the amount of data corresponding to the 
 	 *  message length and call the C code.
 	 */
 	SCR_STORE_REL (scratcha, 1),
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 2c3e89d..d92fe40 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -2457,7 +2457,7 @@
 		}
 
 		/*
-		 *  The data in the dma fifo has not been transfered to
+		 *  The data in the dma fifo has not been transferred to
 		 *  the target -> add the amount to the rest
 		 *  and clear the data.
 		 *  Check the sstat2 register in case of wide transfer.
@@ -5094,7 +5094,7 @@
 }
 
 /*
- *  Lun control block deallocation. Returns the number of valid remaing LCBs
+ *  Lun control block deallocation. Returns the number of valid remaining LCBs
  *  for the target.
  */
 int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln)
diff --git a/drivers/scsi/sym53c8xx_2/sym_malloc.c b/drivers/scsi/sym53c8xx_2/sym_malloc.c
index 883cac1..6f9af0d 100644
--- a/drivers/scsi/sym53c8xx_2/sym_malloc.c
+++ b/drivers/scsi/sym53c8xx_2/sym_malloc.c
@@ -50,7 +50,7 @@
  *  from the SCRIPTS code. In addition, cache line alignment 
  *  is guaranteed for power of 2 cache line size.
  *
- *  This allocator has been developped for the Linux sym53c8xx  
+ *  This allocator has been developed for the Linux sym53c8xx  
  *  driver, since this O/S does not provide naturally aligned 
  *  allocations.
  *  It has the advantage of allowing the driver to use private 
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 5f697e0..4468ae3 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -1843,7 +1843,7 @@
  *
  * The original driver used to rely on a fixed sx_table, containing periods
  * for (only) the lower limits of the respective input-clock-frequency ranges
- * (8-10/12-15/16-20 MHz). Although it seems, that no problems ocurred with
+ * (8-10/12-15/16-20 MHz). Although it seems, that no problems occurred with
  * this setting so far, it might be desirable to adjust the transfer periods
  * closer to the really attached, possibly 25% higher, input-clock, since
  * - the wd33c93 may really use a significant shorter period, than it has
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index db451ae..9ee0afe 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -837,7 +837,7 @@
 		}
 	}
 
-	/* Take the lock, then check we didnt get beaten, if so try again */
+	/* Take the lock, then check we didn't get beaten, if so try again */
 	spin_lock_irqsave(&scbpool_lock, flags);
 	if (freescbs < needed) {
 		spin_unlock_irqrestore(&scbpool_lock, flags);